Makefile.in
aclocal.m4
autom4te.cache
+config.guess
config.h
config.h.in
config.log
config.rpath
config.status
+config.sub
configure
+depcomp
+gl
+install-sh
intl
m4
+missing
mkinstalldirs
+potfiles.tmp
pref.h
stamp-h1
+Sun Jul 31 10:49:47 2005 Ben Pfaff <blp@gnu.org>
+
+ Adopt use of gnulib for portability.
+
+ * Makefile.am: Add gl to SUBDIRS. Add gl/m4 to aclocal include
+ path. Get rid of pkgdocdir data. Move noinst_DATA to EXTRA_DIST.
+
+ * README.CVS: Add instructions for fetching gnulib.
+
+ * Smake: Rewrite to run gnulib-tool. Avoid use of gettextize in
+ normal case (it was unmaintainable). Just use autoreconf
+ --install to do most of the work. Rewrite rule for POTFILES.in
+ for non-GNU make compatibility.
+
+ * configure.ac: Add gnulib commands. Specify gettext version
+ 0.14.5 to placate autopoint. Check that off_t is an integer type,
+ because Solaris can sometimes declare it as a struct. Drop
+ explicit checks for gnulib-supported functionality. Fix typo in
+ msdos check.
+
+ * pref.h.orig: Define __attribute__ to avoid wart in gnulib.
+ Don't #include <libintl> and define gettext, _, N_, because gnulib
+ wants to do the same thing.
+
Sun Jul 24 20:31:13 2005 Ben Pfaff <blp@gnu.org>
* configure.ac: Don't detect libgmp anymore, because we eliminated
AUTOMAKE_OPTIONS = gnits 1.7
-SUBDIRS = m4 intl doc lib src po config tests
-
-pkgdocdir = $(prefix)/doc/@PACKAGE@
-pkgdoc_DATA = NEWS README TODO
-noinst_DATA = AUTHORS THANKS
+SUBDIRS = m4 intl doc lib gl src po config tests
DISTCLEANFILES = pref.h
private-uninstall:
$(MAKE) private-uninstall -C config
-EXTRA_DIST = mkinstalldirs config.rpath NEWS ONEWS TODO pref.h.orig \
-configure pspp-mode.el
+EXTRA_DIST = AUTHORS NEWS ONEWS README TODO THANKS config.rpath \
+mkinstalldirs config.rpath pref.h.orig configure pspp-mode.el
MAINTAINERCLEANFILES = Makefile.in aclocal.m4
-
-ACLOCAL_AMFLAGS = -I m4
+ACLOCAL_AMFLAGS = -I m4 -I gl/m4
SPSS's transformation language. Its statistical procedure support is
currently limited, but growing.
-Source code for the latest development release of PSPP is available at
-ftp://alpha.gnu.org/gnu/pspp
-
For information on differences from previous versions, please see file
NEWS. Full documentation on PSPP's language can be found in the doc/
directory.
+Source code for the latest release of PSPP is available at
+ftp://ftp.gnu.org/pub/gnu/pspp/. Older versions may be obtained from
+ftp://alpha.gnu.org/gnu/pspp/. Development sources are available from
+CVS at http://savannah.gnu.org/projects/pspp
+
Questions and comments regarding PSPP can be sent to pspp-dev@gnu.org.
PSPP bug reports may be sent to bug-gnu-pspp@gnu.org or filed in the
bug-tracking system at http://savannah.gnu.org/bugs/?group=pspp
To build this project from the sources direct from the
-cvs archive use:
+cvs archive, you must install:
-make -f Smake
-# If you need to pass arguments to configure, use
-# make -f Smake CONFIGUREFLAGS="--with-this --without-that"
-make
+ * Autoconf 2.58 (or later).
+ * Automake 1.7 (or later).
+ * Gettext 0.14.5 (or later).
- To test it:
+ * Gnulib, from CVS (see http://savannah.gnu.org/cvs/?group=gnulib).
+ Consider applying the patch at the end of this file, unless
+ the bug it fixes has already been fixed. Note that Gnulib
+ does not require any form of installation: simply checking it
+ out into a directory is sufficient.
-make check
+Once you have these installed, execute
+ make -f Smake
+If you checked Gnulib out in a directory named `gnulib' at the same
+level as PSPP, then this is sufficient. Otherwise, provide the
+location of GNULIB on the `make' command line:
+ make -f Smake GNULIB=/gnulib/base/directory/name
- For a very thorough test:
+After executing Smake, you may configure the source tree in the usual
+way with ./configure, e.g.
+ ./configure
+For a list of options:
+ ./configure --help
-make distcheck
+To test:
+ make check
+
+For a very thorough test:
+ make distcheck
-Makefile po/Makefile.in: Makefile.in configure install-sh config.h.in po/Makefile.in.in po/POTFILES.in
- ./configure $(CONFIGUREFLAGS)
+# -*- makefile -*-
-configure: configure.ac aclocal.m4
- autoconf
+GNULIB = ../gnulib
+GNULIB_TOOL = $(GNULIB)/gnulib-tool
-config.h.in: configure.ac
- autoheader
+all: po/POTFILES.in
+ $(GNULIB_TOOL) --import
+ autoreconf --install
-aclocal.m4:
- aclocal -I m4
+gettextize:
+ touch m4/Makefile.am
+ gettextize -f -c --intl --no-changelog
-# We want all src/*.c files which do not have corresponding src/*.q
+po/POTFILES.in:
+ for f in `find src -name \*.[qc] -print | sed 's/\.[qc]$$//'`; do \
+ if test $$f = src/version.c; then break; fi; \
+ if test -e $$f.q; then echo $$f.q; else echo $$f.c; fi \
+ done | sort | uniq > $@.tmp
+ if test ! -e $@ || ! cmp -s $@.tmp $@; then mv $@.tmp $@; fi
+ rm -f $@.tmp
-src_q_files=$(wildcard src/*.q)
-src_c_files=$(wildcard src/*.c)
-src_cq_files=$(patsubst %.q, %.c, $(src_q_files))
-src_files=$(filter-out $(src_cq_files), $(src_c_files)) $(src_q_files)
+PO_FILES = po/ChangeLog po/Makefile po/Makefile.in po/Makefile.in.in \
+po/POTFILES po/POTFILES.in po/Rules-quot po/boldquot.sed \
+po/cat-id-tbl.c po/en@boldquot.header po/en@quot.header \
+po/insert-header.sin po/quot.sed po/remove-potcdate.sin po/stamp-po \
+po/Makevars.template
-
-.PHONY: po/POTFILES.in
-po/POTFILES.in:
- @$(RM) po/potfile-temp
- for f in $(src_files) ; do \
- if [ $$f = "src/version.c" ] ; then continue ; fi ; \
- echo $$f >> po/potfile-temp ; done
- @if ( ! test -e $@ ) || ( ! diff -q po/potfile-temp $@ ) ; then mv po/potfile-temp $@ ; else $(RM) po/potfile-temp ; fi
-
-install-sh Makefile.in: intl Makefile.am aclocal.m4 config.h.in ABOUT-NLS
- automake --add-missing
-
-po/Makefile.in.in intl ABOUT-NLS:
- touch -f Makefile.am Makefile.am-stamp
- touch -f configure.ac configure.ac-stamp
- cp -pR configure.ac configure.ac-bak
- cp -pR Makefile.am Makefile.am-bak
- gettextize -f -c --no-changelog --intl
- cp -pR Makefile.am-bak Makefile.am
- touch -f Makefile.am-stamp Makefile.am
- cp -pR configure.ac-bak configure.ac
- touch -f configure.ac-stamp configure.ac
- $(RM) configure.ac-bak configure.ac-stamp
- $(RM) Makefile.am-bak Makefile.am-stamp
-
-
-
-.PHONY: clean
clean:
- $(RM) config.sub config.guess config.rpath
- $(RM) ABOUT-NLS
- $(RM) -r autom4te.cache
- $(RM) aclocal.m4
- $(RM) missing mkinstalldirs
- $(RM) install-sh
- $(RM) configure Makefile Makefile.in
- $(RM) depcomp
- $(RM) -r m4 intl
- $(RM) po/ChangeLog \
- po/Makefile \
- po/Makefile.in \
- po/Makefile.in.in \
- po/POTFILES \
- po/POTFILES.in \
- po/Rules-quot \
- po/boldquot.sed \
- po/cat-id-tbl.c \
- po/en@boldquot.header \
- po/en@quot.header \
- po/insert-header.sin \
- po/quot.sed \
- po/remove-potcdate.sin \
- po/stamp-po \
- po/Makevars.template
+ rm -f config.sub config.guess config.rpath
+ rm -f ABOUT-NLS
+ rm -fr autom4te.cache
+ rm -f aclocal.m4
+ rm -f missing mkinstalldirs
+ rm -f install-sh
+ rm -f configure Makefile Makefile.in
+ rm -f depcomp
+ rm -fr intl gl
+ rm -f m4/*.m4
+ rm -f $(PO_FILES)
+
+.PHONY: all gettextize potfiles clean
-Time-stamp: <2005-05-16 22:22:15 blp>
+Time-stamp: <2005-07-28 21:45:15 blp>
+
+Get rid of need for file name canonicalization.
+
+Use getsubopt()?
Format specifier and missing values code needs to be rewritten for lowered
crappiness.
dnl Checks for programs.
AC_GNU_SOURCE
AC_PROG_CC
+gl_EARLY
AC_PROG_RANLIB
AM_CONDITIONAL(cc_is_gcc, test x"$GCC" = x"yes" )
+dnl Check that Perl is available.
AC_PATH_PROG([PERL], perl, no)
AC_SUBST([PERL])dnl
if test "$PERL" = no; then
dnl Internationalization macros.
AM_GNU_GETTEXT
-AM_GNU_GETTEXT_VERSION dnl Prevents autoreconf complaint.
+AM_GNU_GETTEXT_VERSION([0.14.5])
dnl Checks for libraries.
AC_SYS_LARGEFILE
fi
AM_CONDITIONAL(WITHCHARTS, test x"$with_libplot" != x"no")
+dnl Check that off_t is defined as an integer type.
+dnl Solaris sometimes declares it as a struct, if it
+dnl thinks that the compiler does not support `long long'.
+AC_COMPILE_IFELSE([#include <sys/types.h>
+#include <unistd.h>
+off_t x = 0;
+int main (void)
+{
+ lseek (0, 1, 2);
+ return 0;
+}], [], [AC_MSG_ERROR(
+[Your system's definition of off_t is broken. You are probably
+using Solaris. You can probably fix the problem with
+`--disable-largefile' or `CFLAGS=-ansi'.])])
AC_CHECK_LIB(gslcblas,main,,AC_MSG_ERROR([You must install libgslcblas]))
AC_CHECK_LIB(gsl, gsl_cdf_chisq_Q,,
AC_MSG_ERROR([You must install libgsl version 1.4 or later]))
-AC_CHECK_LIB(gnugetopt,getopt_long)
-AC_CHECK_FUNC(getopt_long,,
- AC_MSG_ERROR(`This application depends upon getopt_long'))
-
AC_ARG_WITH(ncurses,
[ --without-ncurses don't compile in ncurses command line editing])
-
if test "x$with_ncurses" = x"yes"; then
AC_CHECK_LIB(ncurses, tgetent, LIBS="-lncurses $LIBS" termcap=yes,
AC_CHECK_LIB(termcap, tgetent, LIBS="-ltermcap $LIBS" termcap=yes,
termcap=no))
fi
-
if test "$termcap" = yes; then
AC_CHECK_HEADERS(termcap.h)
AC_DEFINE(HAVE_LIBTERMCAP, 1,
AC_CHECK_HEADERS([limits.h memory.h sys/stat.h sys/time.h sys/types.h \
fpu_control.h sys/mman.h sys/wait.h ieeefp.h fenv.h] )
-AC_HEADER_STAT
-AC_HEADER_STDC
-AC_HEADER_TIME
-AC_HEADER_STDBOOL
+# For gnulib.
+gl_LIB(libgl)
+gl_SOURCE_BASE(gl)
+gl_M4_BASE(gl/m4)
+gl_MODULES(alloca alloca-opt assert full-read full-write gethostname getline getlogin_r getopt gettext memchr memcmp memmem memmove memset progname readlink restrict snprintf stat-macros stdbool stpcpy strcase strcspn strerror strftime strstr strtod strtok_r strtol strtoul vsnprintf xalloc xalloc-die xreadlink)
+gl_INIT
AC_C_CONST
AC_C_INLINE
+
dnl Dont use AC_TYPE_OFF_T --- it doesnt generate the HAVE_TYPE macro
AC_CHECK_TYPES(off_t)
-AC_TYPE_SIZE_T
-AC_STRUCT_TM
-
AC_CHECK_SIZEOF(short, 2)
AC_CHECK_SIZEOF(int, 4)
AC_CHECK_SIZEOF(long, 4)
BLP_INT_DIGITS
BLP_RANDOM
-AC_FUNC_ALLOCA
-AC_FUNC_MEMCMP
AC_FUNC_VPRINTF
-AC_REPLACE_FUNCS([memmove memset stpcpy strpbrk strerror strtol strtoul \
- memchr getline getdelim strcasecmp strncasecmp memmem \
- strtok_r])
-AC_CHECK_FUNCS([gethostname strstr strtod __setfpucw isinf isnan finite \
- getpid feholdexcept mkdtemp])
+AC_CHECK_FUNCS([strchr strrchr __setfpucw isinf isnan finite getpid feholdexcept])
AC_PROG_LN_S
AM_CONDITIONAL(unix, test x"$host_os" != x"msdos" )
-AM_CONDITIONAL(msdos, test x"$host_os" == x"msdos" )
+AM_CONDITIONAL(msdos, test x"$host_os" = x"msdos" )
dnl This is needed otherwise --with-included-gettext fails
AH_BOTTOM([#include <locale.h>])
AC_DEFINE(DEBUGGING, 1, [Define to 1 if debugging is enabled.])
fi
-AC_CONFIG_FILES([Makefile po/Makefile.in m4/Makefile
- lib/Makefile lib/misc/Makefile lib/gsl-extras/Makefile
+AC_CONFIG_FILES([Makefile m4/Makefile gl/Makefile intl/Makefile po/Makefile.in
+ lib/Makefile lib/gsl-extras/Makefile
doc/Makefile
src/Makefile src/expressions/Makefile
config/Makefile
fi
if test -f pref.h; then touch pref.h; fi
])
-AC_OUTPUT(intl/Makefile)
+AC_OUTPUT
dnl configure.ac ends here
+++ /dev/null
-#! /bin/sh
-#
-# Copyright (C) 1995-1998, 2000-2002 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-
-# This file was copied from gettextize version 0.11.5 and modified to allow
-# sensible use --- what the gettext maintainers call `misuse' and refuse to
-# support. John Darrington 3 Feb 2004
-
-progname=$0
-package=gettext
-version=0.11.5-jmd-hacked
-
-# func_usage
-# outputs to stdout the --help usage message.
-func_usage ()
-{
- echo "\
-Usage: gettextize [OPTION]... [package-dir]
-
-Prepares a source package to use gettext.
-
-Options:
- --help print this help and exit
- --version print version information and exit
- -c, --copy copy files instead of making symlinks
- -f, --force force writing of new files even if old exist
- --intl install libintl in a subdirectory
- --no-changelog don't update or create ChangeLog files
- -n, --dry-run print modifications but don't perform them
-
-Report bugs to <bug-gnu-gettext@gnu.org>."
-}
-
-# func_version
-# outputs to stdout the --version message.
-func_version ()
-{
- echo "$progname (GNU $package) $version"
- echo "Copyright (C) 1995-1998, 2000-2002 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- echo "Written by" "Ulrich Drepper"
-}
-
-# func_fatal_error message
-# outputs to stderr a fatal error message, and terminates the program.
-func_fatal_error ()
-{
- echo "gettextize: *** $1" 1>&2
- echo "gettextize: *** Stop." 1>&2
- exit 1
-}
-
-# Command-line option processing.
-# Removes the OPTIONS from the arguments. Sets the variables:
-# - force 1 if --force was given, 0 otherwise
-# - intldir yes if --intl was given, empty otherwise
-# - try_ln_s false if --copy was given, : otherwise
-# - do_changelog false if --no-changelog was given, : otherwise
-# - doit false if --dry-run was given, : otherwise
-{
- force=0
- intldir=
- try_ln_s=:
- do_changelog=:
- doit=:
-
- while test $# -gt 0; do
- case "$1" in
- -c | --copy | --cop | --co | --c )
- shift
- try_ln_s=false ;;
- -n | --dry-run | --dry-ru | --dry-r | --dry- | --dry | --dr | --d )
- shift
- doit=false ;;
- -f | --force | --forc | --for | --fo | --f )
- shift
- force=1 ;;
- --help | --hel | --he | --h )
- func_usage; exit 0 ;;
- --intl | --int | --in | --i )
- shift
- intldir=yes ;;
- --no-changelog | --no-changelo | --no-changel | --no-change | --no-chang | --no-chan | --no-cha | --no-ch | --no-c )
- shift
- do_changelog=false ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v )
- func_version
- exit 0 ;;
- -- ) # Stop option prcessing
- shift; break ;;
- -* )
- echo "gettextize: unknown option $1" 1>&2
- echo "Try 'gettextize --help' for more information." 1>&2
- exit 1 ;;
- * )
- break ;;
- esac
- done
-}
-
-# Command-line argument processing.
-# Analyzes the remaining arguments.
-# Sets the variables
-# - origdir to the original directory,
-# - srcdir to the package directory, and cd-s into it.
-{
- if test $# -gt 1; then
- func_usage 1>&2
- exit 1
- fi
- origdir=`pwd`
- if test $# -eq 1; then
- srcdir=$1
- if cd "$srcdir"; then
- srcdir=`pwd`
- else
- func_fatal_error "Cannot change directory to '$srcdir'."
- fi
- else
- srcdir=$origdir
- fi
-}
-
-# The current directory is now $srcdir.
-
-# Set variable
-# - gettext_dir directory where the sources are stored.
-prefix="/usr"
-gettext_dir="${prefix}/share/gettext"
-
-# Check integrity of package: A configure.in/ac must be present. Sets variable
-# - configure_in name of configure.in/ac file.
-test -f configure.in || test -f configure.ac ||
- func_fatal_error "Missing configure.in or configure.ac, please cd to your package first."
-configure_in=NONE
-if test -f configure.in; then
- configure_in=configure.in
-else
- if test -f configure.ac; then
- configure_in=configure.ac
- fi
-fi
-
-# Check whether the --force option is needed but has not been specified.
-if test $force -eq 0; then
- if test -d intl; then
- func_fatal_error "intl/ subdirectory exists: use option -f if you really want to delete it."
- fi
- if test -f po/Makefile.in.in; then
- func_fatal_error "po/Makefile.in.in exists: use option -f if you really want to delete it."
- fi
- if test -f ABOUT-NLS; then
- func_fatal_error "ABOUT-NLS exists: use option -f if you really want to delete it."
- fi
-fi
-
-# Check in which directory config.rpath, mkinstalldirs etc. belong.
-auxdir=`cat "$configure_in" | grep '^AC_CONFIG_AUX_DIR' | sed -n -e 's/AC_CONFIG_AUX_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
-if test -n "$auxdir"; then
- auxdir="$auxdir/"
-fi
-
-# For simplicity we change to the gettext source directory.
-cd $gettext_dir ||
- func_fatal_error "gettext source directory '${gettext_dir}' doesn't exist"
-
-# Variables which keep track what has been modified.
-added_directories=
-removed_directory=
-added_extradist=
-added_acoutput=
-removed_acoutput=" intl/intlh.inst"
-
-# Variable:
-# - please accumulates instructions for the user.
-please=
-
-# Variable:
-# - date current date, for use in ChangeLog entries.
-date=`date +%Y-%m-%d`
-
-# func_copy from to
-# copies a file.
-# 'from' is a relative pathname, relative to the current directory.
-# 'to' is a relative pathname, relative to $srcdir.
-func_copy ()
-{
- if $doit; then
- rm -f "$srcdir/$2"
- echo "Copying file $2"
- cp "$1" "$srcdir/$2"
- else
- echo "Copy file $2"
- fi
-}
-
-# func_linkorcopy from absfrom to
-# links or copies a file.
-# 'from' is a relative pathname, relative to the current directory.
-# 'absfrom' is the corresponding absolute pathname.
-# 'to' is a relative pathname, relative to $srcdir.
-func_linkorcopy ()
-{
- if $doit; then
- rm -f "$srcdir/$3"
- ($try_ln_s && ln -s "$2" "$srcdir/$3" && echo "Symlinking file $3") 2>/dev/null ||
- { echo "Copying file $3"; cp "$1" "$srcdir/$3"; }
- else
- if $try_ln_s; then
- echo "Symlink file $3"
- else
- echo "Copy file $3"
- fi
- fi
-}
-
-# func_backup to
-# makes a backup of a file that is about to be overwritten or replaced.
-# 'to' is a relative pathname, relative to $srcdir.
-func_backup ()
-{
- if $doit; then
- if test -f "$srcdir/$1"; then
- rm -f "$srcdir/$1~"
- cp -p "$srcdir/$1" "$srcdir/$1~"
- fi
- fi
-}
-
-# func_remove to
-# removes a file.
-# 'to' is a relative pathname, relative to $srcdir.
-func_remove ()
-{
- if $doit; then
- echo "Removing $1"
- rm -f "$srcdir/$1"
- else
- echo "Remove $1"
- fi
-}
-
-# func_ChangeLog_init
-# func_ChangeLog_add_entry line
-# func_ChangeLog_finish
-# manage the ChangeLog file, relative to $srcdir.
-func_ChangeLog_init ()
-{
- modified_ChangeLog=
-}
-func_ChangeLog_add_entry ()
-{
- if $doit; then
- if test -z "$modified_ChangeLog"; then
- echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/ChangeLog.tmp"
- echo >> "$srcdir/ChangeLog.tmp"
- modified_ChangeLog=yes
- fi
- echo "$1" >> "$srcdir/ChangeLog.tmp"
- else
- modified_ChangeLog=yes
- fi
-}
-func_ChangeLog_finish ()
-{
- if test -n "$modified_ChangeLog"; then
- if $doit; then
- echo >> "$srcdir/ChangeLog.tmp"
- if test -f "$srcdir/ChangeLog"; then
- echo "Adding an entry to ChangeLog (backup is in ChangeLog~)"
- cat "$srcdir/ChangeLog" >> "$srcdir/ChangeLog.tmp"
- rm -f "$srcdir/ChangeLog~"
- cp -p "$srcdir/ChangeLog" "$srcdir/ChangeLog~"
- else
- echo "Creating ChangeLog"
- fi
- cp "$srcdir/ChangeLog.tmp" "$srcdir/ChangeLog"
- rm -f "$srcdir/ChangeLog.tmp"
- else
- if test -f "$srcdir/ChangeLog"; then
- echo "Add an entry to ChangeLog"
- else
- echo "Create ChangeLog"
- fi
- fi
- fi
-}
-
-# func_poChangeLog_init
-# func_poChangeLog_add_entry line
-# func_poChangeLog_finish
-# manage the po/ChangeLog file, relative to $srcdir.
-func_poChangeLog_init ()
-{
- modified_poChangeLog=
-}
-func_poChangeLog_add_entry ()
-{
- if $doit; then
- if test -z "$modified_poChangeLog"; then
- echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/po/ChangeLog.tmp"
- echo >> "$srcdir/po/ChangeLog.tmp"
- modified_poChangeLog=yes
- fi
- echo "$1" >> "$srcdir/po/ChangeLog.tmp"
- else
- modified_poChangeLog=yes
- fi
-}
-func_poChangeLog_finish ()
-{
- if test -n "$modified_poChangeLog"; then
- if $doit; then
- echo >> "$srcdir/po/ChangeLog.tmp"
- if test -f "$srcdir/po/ChangeLog"; then
- echo "Adding an entry to po/ChangeLog (backup is in po/ChangeLog~)"
- cat "$srcdir/po/ChangeLog" >> "$srcdir/po/ChangeLog.tmp"
- rm -f "$srcdir/po/ChangeLog~"
- cp -p "$srcdir/po/ChangeLog" "$srcdir/po/ChangeLog~"
- else
- echo "Creating po/ChangeLog"
- fi
- cp "$srcdir/po/ChangeLog.tmp" "$srcdir/po/ChangeLog"
- rm -f "$srcdir/po/ChangeLog.tmp"
- else
- if test -f "$srcdir/po/ChangeLog"; then
- echo "Add an entry to po/ChangeLog"
- else
- echo "Create po/ChangeLog"
- fi
- fi
- fi
-}
-
-# func_m4ChangeLog_init
-# func_m4ChangeLog_add_entry line
-# func_m4ChangeLog_finish
-# manage the $m4dir/ChangeLog file, relative to $srcdir.
-func_m4ChangeLog_init ()
-{
- modified_m4ChangeLog=
-}
-func_m4ChangeLog_add_entry ()
-{
- if $doit; then
- if test -z "$modified_m4ChangeLog"; then
- echo "$date gettextize <bug-gnu-gettext@gnu.org>" > "$srcdir/$m4dir/ChangeLog.tmp"
- echo >> "$srcdir/$m4dir/ChangeLog.tmp"
- modified_m4ChangeLog=yes
- fi
- echo "$1" >> "$srcdir/$m4dir/ChangeLog.tmp"
- else
- modified_m4ChangeLog=yes
- fi
-}
-func_m4ChangeLog_finish ()
-{
- if test -n "$modified_m4ChangeLog"; then
- if $doit; then
- echo >> "$srcdir/$m4dir/ChangeLog.tmp"
- if test -f "$srcdir/$m4dir/ChangeLog"; then
- echo "Adding an entry to $m4dir/ChangeLog (backup is in $m4dir/ChangeLog~)"
- cat "$srcdir/$m4dir/ChangeLog" >> "$srcdir/$m4dir/ChangeLog.tmp"
- rm -f "$srcdir/$m4dir/ChangeLog~"
- cp -p "$srcdir/$m4dir/ChangeLog" "$srcdir/$m4dir/ChangeLog~"
- else
- echo "Creating $m4dir/ChangeLog"
- fi
- cp "$srcdir/$m4dir/ChangeLog.tmp" "$srcdir/$m4dir/ChangeLog"
- rm -f "$srcdir/$m4dir/ChangeLog.tmp"
- else
- if test -f "$srcdir/$m4dir/ChangeLog"; then
- echo "Add an entry to $m4dir/ChangeLog"
- else
- echo "Create $m4dir/ChangeLog"
- fi
- fi
- fi
-}
-
-if test ! -f "$srcdir/intl/Makefile.in" && test -n "$intldir"; then
- added_acoutput="$added_acoutput intl/Makefile"
-fi
-if test -f "$srcdir/intl/Makefile.in" && test -z "$intldir"; then
- removed_acoutput="$removed_acoutput intl/Makefile"
-fi
-if test -d "$srcdir/intl"; then
- # Remove everything inside intl except for RCS and CVS subdirs and invisible
- # files.
- if $doit; then
- echo "Wiping out intl/ subdirectory"
- (cd "$srcdir/intl" &&
- for f in *; do
- if test CVS != "$f" && test RCS != "$f"; then
- rm -rf "$f"
- fi
- done)
- else
- echo "Wipe out intl/ subdirectory"
- fi
- if test -z "$intldir"; then
- removed_directory=intl
- fi
-else
- if test -n "$intldir"; then
- if $doit; then
- echo "Creating intl/ subdirectory"
- mkdir "$srcdir/intl" || func_fatal_error "failed to create intl/ subdirectory"
- else
- echo "Create intl/ subdirectory"
- fi
- added_directories="$added_directories intl"
- fi
-fi
-
-$do_changelog && func_ChangeLog_init
-
-test -d "$srcdir/po" || {
- if $doit; then
- echo "Creating po/ subdirectory"
- mkdir "$srcdir/po" || func_fatal_error "failed to create po/ subdirectory"
- else
- echo "Create po/ subdirectory"
- fi
-}
-
-# Now copy all files. Take care for the destination directories.
-for file in *; do
- case $file in
- ABOUT-NLS)
- func_linkorcopy $file "$gettext_dir/$file" $file
- ;;
- config.rpath | mkinstalldirs)
- if test -f "$srcdir/$auxdir$file"; then
- :
- else
- added_extradist="$added_extradist $auxdir$file"
- fi
- func_linkorcopy $file "$gettext_dir/$file" "$auxdir$file"
- ;;
- esac
-done
-
-# Copy files to intl/ subdirectory.
-if test -n "$intldir"; then
- cd intl
- for file in *; do
- if test $file != COPYING.LIB-2.0 && test $file != COPYING.LIB-2.1; then
- if test $file != plural.c; then
- func_linkorcopy $file "$gettext_dir/intl/$file" intl/$file
- else
- # plural.c is a generated file; it must be copied and touched.
- func_copy $file intl/$file
- if $doit; then
- (sleep 2; touch "$srcdir/intl/$file") &
- fi
- fi
- fi
- done
- cd ..
-else
- echo "Not copying intl/ directory."
- please="$please
-Please use AM_GNU_GETTEXT([external]) in order to cause autoconfiguration
-to look for an external libintl.
-"
-fi
-
-# Copy files to po/ subdirectory.
-$do_changelog && func_poChangeLog_init
-cd po
-for file in Makefile.in.in; do
- same=no
- if test -f "$srcdir/po/$file"; then
- if cmp -s $file "$srcdir/po/$file"; then
- same=yes
- fi
- else
- added_acoutput="$added_acoutput po/Makefile.in"
- fi
- if $do_changelog && test $same = no; then
- if test -f "$srcdir/po/$file"; then
- func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}."
- else
- func_poChangeLog_add_entry " * $file: New file, from gettext-${version}."
- fi
- fi
- func_backup po/$file
- func_linkorcopy $file "$gettext_dir/po/$file" po/$file
-done
-for file in *; do
- case $file in
- Makefile.in.in)
- # Already handled above.
- ;;
- Makevars)
- func_linkorcopy $file "$gettext_dir/po/$file" po/$file.template
- if test -f "$srcdir/po/$file"; then
- sed -n -e 's/[ ]*\([A-Za-z0-9_]*\)[ ]*=.*/\1/p' < "$srcdir/po/$file" | LC_ALL=C sort > "$srcdir/po/$file.tmp1"
- sed -n -e 's/[ ]*\([A-Za-z0-9_]*\)[ ]*=.*/\1/p' < "$srcdir/po/$file.template" | LC_ALL=C sort > "$srcdir/po/$file.tmp2"
- missingvars=`LC_ALL=C comm -13 "$srcdir/po/$file.tmp1" "$srcdir/po/$file.tmp2"`
- rm -f "$srcdir/po/$file.tmp1" "$srcdir/po/$file.tmp2"
- if test -n "$missingvars"; then
- please="$please
-Please update po/$file so that it defines all the variables mentioned
-in po/$file.template.
-You can then remove po/$file.template.
-"
- fi
- else
- please="$please
-Please create po/$file from the template in po/$file.template.
-You can then remove po/$file.template.
-"
- fi
- ;;
- *)
- same=no
- if test -f "$srcdir/po/$file"; then
- if cmp -s $file "$srcdir/po/$file"; then
- same=yes
- fi
- fi
- if $do_changelog && test $same = no; then
- if test -f "$srcdir/po/$file"; then
- func_poChangeLog_add_entry " * $file: Upgrade to gettext-${version}."
- else
- func_poChangeLog_add_entry " * $file: New file, from gettext-${version}."
- fi
- fi
- func_backup po/$file
- func_linkorcopy $file $gettext_dir/po/$file po/$file
- ;;
- esac
-done
-if test -f "$srcdir/po/cat-id-tbl.c"; then
- func_remove po/cat-id-tbl.c
- $do_changelog && func_poChangeLog_add_entry " * cat-id-tbl.c: Remove file."
-fi
-if test -f "$srcdir/po/stamp-cat-id"; then
- func_remove po/stamp-cat-id
- $do_changelog && func_poChangeLog_add_entry " * stamp-cat-id: Remove file."
-fi
-$do_changelog && func_poChangeLog_finish
-
-m4filelist=' codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4
- inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4
- lib-prefix.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4'
-# We cannot omit codeset.m4, glibc21.m4, intdiv0.m4, inttypes.m4,
-# inttypes_h.m4, isc-posix.m4, lcmessage.m4, stdint_h.m4, uintmax_t.m4
-# if test -z "$intldir", otherwise "aclocal -I m4" might give an error.
-# (aclocal doesn't know which macros are really needed, it looks which macros
-# are potentially needed.)
-
-# All sorts of bugs could occur if the configure file was remade with the wrong
-# version of gettext.m4 et al. (because then the configure and the po/Makefile.in.in
-# don't fit together). It is therefore important that the package carries the
-# right versions of gettext.m4 et al. with it.
-if test -f "$srcdir/Makefile.am"; then
- # A package using automake.
-
- # Extract the macro directory name from Makefile.am.
- aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ ]*=' "$srcdir/Makefile.am" | sed -e 's/^ACLOCAL_AMFLAGS[ ]*=\(.*\)$/\1/'`
- m4dir=m4
- m4dir_is_next=
- for arg in $aclocal_amflags; do
- if test -n "$m4dir_is_next"; then
- m4dir="$arg"
- break
- else
- if test "X$arg" = "X-I"; then
- m4dir_is_next=yes
- else
- m4dir_is_next=
- fi
- fi
- done
-
- # Update the *.m4 files and the corresponding Makefile.am.
- $do_changelog && func_m4ChangeLog_init
- added_m4files=
- if test -d "$srcdir/$m4dir"; then
- :
- else
- if $doit; then
- echo "Creating directory $m4dir"
- mkdir "$srcdir/$m4dir"
- else
- echo "Create directory $m4dir"
- fi
- added_directories="$added_directories $m4dir"
- fi
- for file in $m4filelist; do
- same=no
- if test -f "$srcdir/$m4dir/$file"; then
- if cmp -s "${prefix}/share/aclocal/$file" "$srcdir/$m4dir/$file"; then
- same=yes
- fi
- else
- added_m4files="$added_m4files $file"
- fi
- if $do_changelog && test $same = no; then
- if test -f "$srcdir/$m4dir/$file"; then
- func_m4ChangeLog_add_entry " * $file: Upgrade to gettext-${version}."
- else
- func_m4ChangeLog_add_entry " * $file: New file, from gettext-${version}."
- fi
- fi
- func_backup "$m4dir/$file"
- func_linkorcopy "${prefix}/share/aclocal/$file" "${prefix}/share/aclocal/$file" "$m4dir/$file"
- done
- if test -n "$added_m4files"; then
- if test -f "$srcdir/$m4dir/Makefile.am"; then
- if $doit; then
- echo "Updating EXTRA_DIST in $m4dir/Makefile.am (backup is in $m4dir/Makefile.am~)"
- func_backup "$m4dir/Makefile.am"
- rm -f "$srcdir/$m4dir/Makefile.am"
- if grep '^EXTRA_DIST[ ]*=' "$srcdir/$m4dir/Makefile.am~" > /dev/null; then
- sed -e "s%^\(EXTRA_DIST[ ]*=\)%\\1$added_m4files %" < "$srcdir/$m4dir/Makefile.am~" > "$srcdir/$m4dir/Makefile.am"
- $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): Add the new files."
- else
- (cat "$srcdir/$m4dir/Makefile.am~"; echo; echo "EXTRA_DIST =$added_m4files") > "$srcdir/$m4dir/Makefile.am"
- $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST): New variable."
- fi
- else
- echo "Update EXTRA_DIST in $m4dir/Makefile.am"
- $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am (EXTRA_DIST)."
- fi
- else
- if $doit; then
- echo "Creating $m4dir/Makefile.am"
- echo "EXTRA_DIST =$added_m4files" > "$srcdir/$m4dir/Makefile.am"
- else
- echo "Create $m4dir/Makefile.am"
- fi
- $do_changelog && func_m4ChangeLog_add_entry " * Makefile.am: New file."
- added_acoutput="$added_acoutput $m4dir/Makefile"
- fi
- fi
- $do_changelog && func_m4ChangeLog_finish
- # Also create $m4dir/Makefile.in from $m4dir/Makefile.am, because automake
- # doesn't do it by itself.
- if $doit; then
- case "$added_acoutput" in
- *" $m4dir/Makefile")
- (cd "$srcdir" && automake "$m4dir/Makefile") 2>/dev/null ||
- please="$please
-Please run 'automake $m4dir/Makefile' to create $m4dir/Makefile.in
-"
- ;;
- esac
- fi
-
- # Update the top-level Makefile.am.
- modified_Makefile_am=
-
- # [snip]
-
-
- if test -z "$m4dir_is_next"; then
- # Also update Makefile.in and, if existent, Makefile. Otherwise they
- # would take into account the new flags only after a few rounds of
- # "./configure", "make", "touch configure.in", "make distclean".
- if $doit; then
- for file in Makefile.in Makefile; do
- if test -f "$srcdir/$file"; then
- func_backup $file
- rm -f "$srcdir/$file"
- sed -e "s%(ACLOCAL)%(ACLOCAL) -I $m4dir%" < "$srcdir/$file~" > "$srcdir/$file"
- fi
- done
- fi
- fi
- please="$please
-Please run 'aclocal -I $m4dir' to regenerate the aclocal.m4 file.
-You need aclocal from GNU automake 1.5 (or newer) to do this.
-Then run 'autoconf' to regenerate the configure file.
-"
-else
- please="$please
-Please add the files
-$m4filelist
-from the ${prefix}/share/aclocal directory to your aclocal.m4 file.
-"
-fi
-
-modified_configure_in=
-
-# [snip]
-
-if test -n "$added_acoutput"; then
- if ! grep '^AC_CONFIG_FILES(' "$srcdir/$configure_in" > /dev/null; then
- if ! grep '^AC_OUTPUT(' "$srcdir/$configure_in" > /dev/null; then
- please="$please
-Please add$added_acoutput to the AC_OUTPUT or AC_CONFIG_FILES invocation in the $configure_in file.
-"
- fi
- fi
-fi
-if test -n "$removed_acoutput"; then
- for file in $removed_acoutput; do
- tag=
- sedprog='{
- s%\([[ ]\)'"$file"'[ ]%\1%
- s%\([[ ]\)'"$file"'\([]),]\)%\1\2%
- s%[[ ]'"$file"'$%%
- :a
- tb
- :b
- s%\\$%\\%
- tc
- bd
- :c
- n
- s%\([ ]\)'"$file"'[ ]%\1%
- s%\([ ]\)'"$file"'\([]),]\)%\1\2%
- s%[ ]'"$file"'$%%
- ba
- :d
- }'
- sed -e '/^AC_CONFIG_FILES(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
- if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then
- sed -e '/^AC_OUTPUT(/'"$sedprog" < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
- if cmp -s "$srcdir/$configure_in" "$srcdir/$configure_in.tmp"; then
- :
- else
- tag=AC_OUTPUT
- fi
- else
- tag=AC_CONFIG_FILES
- fi
- if ! test -n "$tag"; then
- rm -f "$srcdir/$configure_in.tmp"
- if test "$file" != intl/intlh.inst; then
- please="$please
-Please remove $file from the AC_OUTPUT or AC_CONFIG_FILES invocation
-in the $configure_in file.
-"
- fi
- fi
- done
-fi
-sed -e 's%sed -e "/POTFILES =/r po/POTFILES" po/Makefile\.in > po/Makefile *;* *%%' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
-sed -e '/^\(dnl \|\)AC_LINK_FILES(\$nls_cv_header_libgt, \$nls_cv_header_intl)$/d' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
-sed -e 's/^AM_GNU_GETTEXT_VERSION([^()]*)/AM_GNU_GETTEXT_VERSION('"$version"')/' < "$srcdir/$configure_in" > "$srcdir/$configure_in.tmp"
-$do_changelog && func_ChangeLog_finish
-
-# Recommend replacement for deprecated Makefile variables.
-use_libtool=`cat "$srcdir/$configure_in" | grep '^A[CM]_PROG_LIBTOOL'`
-for file in `(cd "$srcdir"; find . -name Makefile.am -print; find . -name Makefile.in -print) | sed -e 's,^\./,,'`; do
- if test -f "$srcdir/$file"; then
- if test `echo "$file" | sed -e 's,^.*/,,'` = Makefile.in && grep automake "$srcdir/$file" >/dev/null 2>&1; then
- continue;
- fi
- # INTLLIBS is deprecated because it doesn't distinguish the two
- # cases: with libtool, without libtool.
- if grep '@''INTLLIBS''@' "$srcdir/$file" >/dev/null 2>&1; then
- if test -n "$use_libtool"; then
- please="$please
-Please change $file to use @""LTLIBINTL""@ or @""LIBINTL""@ instead of
-@""INTLLIBS""@. Which one, depends whether it is used with libtool or not.
-@""INTLLIBS""@ will go away.
-"
- else
- please="$please
-Please change $file to use @""LIBINTL""@ instead of @""INTLLIBS""@.
-@""INTLLIBS""@ will go away.
-"
- fi
- fi
- # DATADIRNAME is deprecated because we install only .gmo files nowadays,
- # which can be stored in the platform independent $prefix/share hierarchy.
- if grep '@''DATADIRNAME''@' "$srcdir/$file" >/dev/null 2>&1; then
- please="$please
-Please change $file to use the constant string \"share\" instead of
-@""DATADIRNAME""@. @""DATADIRNAME""@ will go away.
-"
- fi
- # INSTOBJEXT is deprecated because we install only .gmo files nowadays,
- # no catgets .cat catalogs.
- if grep '@''INSTOBJEXT''@' "$srcdir/$file" >/dev/null 2>&1; then
- please="$please
-Please change $file to use the constant string \".mo\" instead of
-@""INSTOBJEXT""@. @""INSTOBJEXT""@ will go away.
-"
- fi
- # GENCAT is deprecated because we install no catgets catalogs anymore.
- if grep '@''GENCAT''@' "$srcdir/$file" >/dev/null 2>&1; then
- please="$please
-Please change $file to use the constant string \"gencat\" instead of
-@""GENCAT""@. @""GENCAT""@ will go away. Maybe you don't even need it any more?
-"
- fi
- # POSUB is deprecated because it causes "./configure --disable-nls", "make",
- # "make dist" to create a buggy tarfile.
- if grep '@''POSUB''@' "$srcdir/$file" >/dev/null 2>&1; then
- please="$please
-Please change $file to use the constant string \"po\" instead of
-@""POSUB""@. @""POSUB""@ will go away.
-"
- fi
- fi
-done
-
-# Recommend replacement for deprecated configure variables.
-if grep '\$nls_cv_header_' "$srcdir/$configure_in" >/dev/null 2>&1; then
- please="$please
-Please stop using \$nls_cv_header_intl or \$nls_cv_header_libgt in the
-$configure_in file. Both will go away. Use <libintl.h> or \"gettext.h\" instead.
-"
-fi
+Sun Jul 31 11:29:04 2005 Ben Pfaff <blp@gnu.org>
+
+ * misc/: Removed in favor of gnulib.
+
+ * Makefile.am: (SUBDIRS) Removed misc.
+
Wed Mar 9 09:53:50 2005 Ben Pfaff <blp@gnu.org>
* gsl-extras/: New directory.
## Process this file with automake to produce Makefile.in -*- makefile -*-
-SUBDIRS = misc gsl-extras
+SUBDIRS = gsl-extras
MAINTAINERCLEANFILES = Makefile.in
msgstr ""
"Project-Id-Version: PSPP 0.3.1\n"
"Report-Msgid-Bugs-To: pspp-dev@gnu.org\n"
-"POT-Creation-Date: 2005-05-27 12:24+0800\n"
+"POT-Creation-Date: 2005-07-30 23:26-0700\n"
"PO-Revision-Date: 2004-01-23 13:04+0800\n"
"Last-Translator: John Darrington <john@darrington.wattle.id.au>\n"
"Language-Team: John Darrington <john@darrington.wattle.id.au>\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n!=1);\n"
-#: src/aggregate.c:196
+#: src/aggregate.c:199
msgid "while expecting COLUMNWISE"
msgstr ""
-#: src/aggregate.c:225
+#: src/aggregate.c:228
msgid "expecting BREAK"
msgstr ""
-#: src/aggregate.c:230
+#: src/aggregate.c:233
msgid ""
"When PRESORTED is specified, specifying sorting directions with (A) or (D) "
"has no effect. Output data will be sorted the same way as the input data."
msgstr ""
-#: src/aggregate.c:386
+#: src/aggregate.c:389
msgid "expecting aggregation function"
msgstr ""
-#: src/aggregate.c:402
+#: src/aggregate.c:405
#, c-format
msgid "Unknown aggregation function %s."
msgstr ""
-#: src/aggregate.c:417
+#: src/aggregate.c:420
msgid "expecting `('"
msgstr ""
-#: src/aggregate.c:454
+#: src/aggregate.c:457
#, c-format
msgid "Missing argument %d to %s."
msgstr ""
-#: src/aggregate.c:463
+#: src/aggregate.c:466
#, c-format
msgid "Arguments to %s must be of same type as source variables."
msgstr ""
-#: src/aggregate.c:473
+#: src/aggregate.c:476 src/expressions/parse.c:830
msgid "expecting `)'"
msgstr ""
-#: src/aggregate.c:485
+#: src/aggregate.c:488
#, c-format
msgid ""
"Number of source variables (%d) does not match number of target variables (%"
"d)."
msgstr ""
-#: src/aggregate.c:501
+#: src/aggregate.c:504
#, c-format
msgid ""
"The value arguments passed to the %s function are out-of-order. They will "
"be treated as if they had been specified in the correct order."
msgstr ""
-#: src/aggregate.c:568
+#: src/aggregate.c:571
#, c-format
msgid ""
"Variable name %s is not unique within the aggregate file dictionary, which "
"contains the aggregate variables and the break variables."
msgstr ""
-#: src/apply-dict.c:68
+#: src/apply-dict.c:71
#, c-format
msgid "Variable %s is %s in target file, but %s in source file."
msgstr ""
-#: src/apply-dict.c:71 src/apply-dict.c:72 src/format.c:236
-#: src/sfm-read.c:1029 src/sfm-read.c:1174 src/sfm-read.c:1175
+#: src/apply-dict.c:74 src/apply-dict.c:75 src/format.c:239
+#: src/sfm-read.c:1032 src/sfm-read.c:1177 src/sfm-read.c:1178
msgid "string"
msgstr ""
-#: src/apply-dict.c:71 src/apply-dict.c:72 src/format.c:236
-#: src/sfm-read.c:1029 src/sfm-read.c:1174 src/sfm-read.c:1175
+#: src/apply-dict.c:74 src/apply-dict.c:75 src/format.c:239
+#: src/sfm-read.c:1032 src/sfm-read.c:1177 src/sfm-read.c:1178
msgid "numeric"
msgstr ""
-#: src/apply-dict.c:84
+#: src/apply-dict.c:87
#, c-format
msgid "Cannot add value labels from source file to long string variable %s."
msgstr ""
-#: src/apply-dict.c:130
+#: src/apply-dict.c:133
#, c-format
msgid ""
"Cannot apply missing values from source file to long string variable %s."
msgstr ""
-#: src/apply-dict.c:163
+#: src/apply-dict.c:166
msgid "No matching variables found between the source and target files."
msgstr ""
-#: src/ascii.c:230
+#: src/ascii.c:233
#, c-format
msgid "ASCII driver initializing as `%s'..."
msgstr ""
-#: src/ascii.c:285
+#: src/ascii.c:288
#, c-format
msgid ""
"ascii driver: Area of page excluding margins and headers must be at least 59 "
"by %d lines."
msgstr ""
-#: src/ascii.c:390 src/devind.c:167 src/html.c:103 src/postscript.c:461
+#: src/ascii.c:393 src/devind.c:170 src/html.c:108 src/postscript.c:456
#, c-format
msgid "%s: Initialization complete."
msgstr ""
-#: src/ascii.c:402 src/devind.c:179 src/html.c:115 src/postscript.c:474
+#: src/ascii.c:405 src/devind.c:182 src/html.c:120 src/postscript.c:469
#, c-format
msgid "%s: Beginning closing..."
msgstr ""
-#: src/ascii.c:424 src/devind.c:184 src/html.c:120 src/postscript.c:493
+#: src/ascii.c:427 src/devind.c:187 src/html.c:125 src/postscript.c:488
#, c-format
msgid "%s: Finished closing."
msgstr ""
-#: src/ascii.c:485
+#: src/ascii.c:488
#, c-format
msgid ""
"Bad index value for `box' key: syntax is box[INDEX], 0 <= INDEX < %d "
"decimal, with INDEX expressed in base 4."
msgstr ""
-#: src/ascii.c:491
+#: src/ascii.c:494
#, c-format
msgid "Duplicate value for key `%s'."
msgstr ""
-#: src/ascii.c:500
+#: src/ascii.c:503
#, c-format
msgid "Unknown configuration parameter `%s' for ascii device driver."
msgstr ""
-#: src/ascii.c:513
+#: src/ascii.c:516
#, c-format
msgid ""
"Unknown character set `%s'. Valid character sets are `ascii' and `latin1'."
msgstr ""
-#: src/ascii.c:522
+#: src/ascii.c:525
#, c-format
msgid ""
"Unknown overstrike style `%s'. Valid overstrike styles are `single' and "
"`line'."
msgstr ""
-#: src/ascii.c:531
+#: src/ascii.c:534
#, c-format
msgid ""
"Unknown carriage return style `%s'. Valid carriage return styles are `cr' "
"and `bs'."
msgstr ""
-#: src/ascii.c:543 src/postscript.c:684
+#: src/ascii.c:546 src/postscript.c:679
#, c-format
msgid "Positive integer required as value for `%s'."
msgstr ""
-#: src/ascii.c:574
+#: src/ascii.c:577
#, c-format
msgid "Zero or positive integer required as value for `%s'."
msgstr ""
-#: src/ascii.c:645 src/postscript.c:642
+#: src/ascii.c:648 src/postscript.c:637
#, c-format
msgid "Boolean value expected for %s."
msgstr ""
-#: src/ascii.c:677 src/ascii.c:692 src/ascii.c:709
+#: src/ascii.c:680 src/ascii.c:695 src/ascii.c:712
#, c-format
msgid "ASCII output driver: %s: %s"
msgstr ""
-#: src/ascii.c:785
+#: src/ascii.c:788
#, c-format
msgid "ascii_line_horz: bad hline (%d,%d),%d out of (%d,%d)\n"
msgstr ""
-#: src/ascii.c:819
+#: src/ascii.c:822
#, c-format
msgid "ascii_line_vert: bad vline %d,(%d,%d) out of (%d,%d)\n"
msgstr ""
-#: src/ascii.c:849
+#: src/ascii.c:852
#, c-format
msgid "ascii_line_intersection: bad intsct (%d,%d) out of (%d,%d)\n"
msgstr ""
-#: src/ascii.c:997
+#: src/ascii.c:1000
#, c-format
msgid "%s: horiz=%d, vert=%d\n"
msgstr ""
-#: src/ascii.c:1169
+#: src/ascii.c:1172
#, c-format
msgid "Writing `%s': %s"
msgstr ""
-#: src/ascii.c:1579 src/postscript.c:2098
+#: src/ascii.c:1582 src/postscript.c:2108
#, c-format
msgid "%s - Page %d"
msgstr ""
-#: src/ascii.c:1646
+#: src/ascii.c:1642
msgid "Charts are unsupported with ascii drivers."
msgstr ""
-#: src/autorecode.c:122
+#: src/autorecode.c:125
#, c-format
msgid "Source variable count (%d) does not match target variable count (%d)."
msgstr ""
-#: src/autorecode.c:139 src/command.c:793 src/compute.c:277 src/do-if.c:253
-#: src/get.c:240 src/lexer.c:424 src/loop.c:241 src/matrix-data.c:528
-#: src/print.c:335 src/print.c:1045 src/recode.c:405 src/sel-if.c:54
-#: src/sel-if.c:131 src/vector.c:194 src/file-handle.q:139
+#: src/autorecode.c:142 src/command.c:797 src/compute.c:280 src/do-if.c:256
+#: src/file-handle.q:142 src/get.c:243 src/lexer.c:428 src/loop.c:244
+#: src/matrix-data.c:531 src/print.c:338 src/print.c:1048 src/recode.c:408
+#: src/sel-if.c:57 src/sel-if.c:134 src/vector.c:197
msgid "expecting end of command"
msgstr ""
-#: src/autorecode.c:149
+#: src/autorecode.c:152
#, c-format
msgid "Target variable %s duplicates existing variable %s."
msgstr ""
-#: src/autorecode.c:156
+#: src/autorecode.c:159
#, c-format
msgid "Duplicate variable name %s among target variables."
msgstr ""
-#: src/calendar.c:78
+#: src/calendar.c:81
#, c-format
msgid "Month %d is not in acceptable range of 0 to 13."
msgstr ""
-#: src/calendar.c:86
+#: src/calendar.c:89
#, c-format
msgid "Day %d is not in acceptable range of 0 to 31."
msgstr ""
-#: src/calendar.c:93
+#: src/calendar.c:96
#, c-format
msgid "Date %04d-%d-%d is before the earliest acceptable date of 1582-10-15."
msgstr ""
-#: src/casefile.c:186
+#: src/casefile.c:252
#, c-format
msgid "%s: Removing temporary file: %s."
msgstr ""
-#: src/casefile.c:333
+#: src/casefile.c:399
#, c-format
msgid "Error writing temporary file: %s."
msgstr ""
-#: src/casefile.c:475
+#: src/casefile.c:541
#, c-format
msgid "%s: Opening temporary file: %s."
msgstr ""
-#: src/casefile.c:501
+#: src/casefile.c:567
#, c-format
msgid "%s: Seeking temporary file: %s."
msgstr ""
-#: src/casefile.c:517
+#: src/casefile.c:583
#, c-format
msgid "%s: Reading temporary file: %s."
msgstr ""
-#: src/casefile.c:520
+#: src/casefile.c:586
#, c-format
msgid "%s: Temporary file ended unexpectedly."
msgstr ""
-#: src/cmdline.c:141 src/cmdline.c:160 src/cmdline.c:172 src/command.c:209
-#: src/set.q:425 src/set.q:427 src/set.q:994
+#: src/cmdline.c:145 src/cmdline.c:164 src/cmdline.c:176 src/command.c:213
+#: src/expressions/parse.c:1206 src/set.q:428 src/set.q:430 src/set.q:997
#, c-format
msgid "%s is not yet implemented."
msgstr ""
-#: src/cmdline.c:243
+#: src/cmdline.c:247
#, c-format
msgid ""
"PSPP, a program for statistical analysis of sample data.\n"
"\n"
msgstr ""
-#: src/cmdline.c:281
+#: src/cmdline.c:285
#, c-format
msgid ""
"\n"
"Report bugs to <%s>.\n"
msgstr ""
-#: src/command.c:146
+#: src/command.c:150
#, c-format
msgid "%s not allowed inside FILE TYPE/END FILE TYPE."
msgstr ""
-#: src/command.c:149
+#: src/command.c:153
#, c-format
msgid "%s not allowed inside FILE TYPE GROUPED/END FILE TYPE."
msgstr ""
-#: src/command.c:152
+#: src/command.c:156
msgid "RECORD TYPE must be the first command inside a FILE TYPE structure."
msgstr ""
-#: src/command.c:199
+#: src/command.c:203
msgid "expecting command name"
msgstr ""
-#: src/command.c:228
+#: src/command.c:232
#, c-format
msgid ""
"%s is not allowed (1) before a command to specify the input program, such as "
"PROGRAM and END INPUT PROGRAM."
msgstr ""
-#: src/command.c:232
+#: src/command.c:236
#, c-format
msgid "%s is not allowed within an input program."
msgstr ""
-#: src/command.c:233 src/command.c:234
+#: src/command.c:237 src/command.c:238
#, c-format
msgid "%s is only allowed within an input program."
msgstr ""
-#: src/command.c:513
+#: src/command.c:517
#, c-format
msgid "Unknown command %s."
msgstr ""
-#: src/command.c:619
+#: src/command.c:623
msgid ""
"This command is not accepted in a syntax file. Instead, use FINISH to "
"terminate a syntax file."
msgstr ""
-#: src/command.c:637
+#: src/command.c:641
msgid ""
"This command is not executed in interactive mode. Instead, PSPP drops down "
"to the command prompt. Use EXIT if you really want to quit."
msgstr ""
-#: src/command.c:680 src/command.c:811 src/permissions.c:101
+#: src/command.c:684 src/command.c:815 src/permissions.c:102
msgid "This command not allowed when the SAFER option is set."
msgstr ""
-#: src/command.c:692
+#: src/command.c:696
#, c-format
msgid "Error removing `%s': %s."
msgstr ""
-#: src/command.c:742
+#: src/command.c:746
#, c-format
msgid "Couldn't fork: %s."
msgstr ""
-#: src/command.c:784
+#: src/command.c:788
#, c-format
msgid "Error executing command: %s."
msgstr ""
-#: src/command.c:832
+#: src/command.c:836
msgid "No operating system support for this command."
msgstr ""
-#: src/command.c:855
+#: src/command.c:859
msgid "This command is not valid in a syntax file."
msgstr ""
-#: src/compute.c:141 src/compute.c:190
+#: src/compute.c:144 src/compute.c:193
#, c-format
msgid ""
"When executing COMPUTE: SYSMIS is not a valid value as an index into vector %"
"s."
msgstr ""
-#: src/compute.c:144 src/compute.c:197
+#: src/compute.c:147 src/compute.c:200
#, c-format
msgid ""
"When executing COMPUTE: %g is not a valid value as an index into vector %s."
msgstr ""
-#: src/compute.c:339
+#: src/compute.c:342
#, c-format
msgid "There is no vector named %s."
msgstr ""
-#: src/count.c:156
+#: src/count.c:159
msgid "Destination cannot be a string variable."
msgstr ""
-#: src/count.c:263
+#: src/count.c:266
#, c-format
msgid ""
"%g THRU %g is not a valid range. The number following THRU must be at least "
"as big as the number preceding THRU."
msgstr ""
-#: src/data-in.c:59
-msgid "data-file error: "
+#: src/crosstabs.q:265
+msgid ""
+"Missing mode REPORT not allowed in general mode. Assuming MISSING=TABLE."
+msgstr ""
+
+#: src/crosstabs.q:275
+msgid "Write mode ALL not allowed in general mode. Assuming WRITE=CELLS."
+msgstr ""
+
+#: src/crosstabs.q:336
+msgid "expecting BY"
+msgstr ""
+
+#: src/crosstabs.q:403
+msgid "VARIABLES must be specified before TABLES."
+msgstr ""
+
+#: src/crosstabs.q:440
+#, c-format
+msgid "Maximum value (%ld) less than minimum value (%ld)."
+msgstr ""
+
+#: src/crosstabs.q:804
+msgid "Summary."
+msgstr ""
+
+#: src/crosstabs.q:806 src/examine.q:919
+msgid "Cases"
+msgstr ""
+
+#: src/crosstabs.q:807 src/examine.q:853 src/frequencies.q:1141
+#: src/frequencies.q:1514
+msgid "Valid"
+msgstr ""
+
+#: src/crosstabs.q:808 src/examine.q:854 src/frequencies.q:1209
+#: src/frequencies.q:1515
+msgid "Missing"
+msgstr ""
+
+#: src/crosstabs.q:809 src/crosstabs.q:1012 src/crosstabs.q:1726
+#: src/examine.q:855 src/frequencies.q:1218 src/oneway.q:311 src/oneway.q:474
+msgid "Total"
+msgstr ""
+
+#: src/crosstabs.q:819 src/examine.q:931 src/frequencies.q:1513
+#: src/oneway.q:397 src/t-test.q:679 src/t-test.q:702 src/t-test.q:827
+#: src/t-test.q:1362
+msgid "N"
+msgstr ""
+
+#: src/crosstabs.q:820 src/examine.q:934 src/frequencies.q:1145
+#: src/frequencies.q:1146 src/frequencies.q:1147
+msgid "Percent"
+msgstr ""
+
+#: src/crosstabs.q:1062
+msgid "count"
+msgstr ""
+
+#: src/crosstabs.q:1063
+msgid "row %"
+msgstr ""
+
+#: src/crosstabs.q:1064
+msgid "column %"
+msgstr ""
+
+#: src/crosstabs.q:1065
+msgid "total %"
+msgstr ""
+
+#: src/crosstabs.q:1066
+msgid "expected"
+msgstr ""
+
+#: src/crosstabs.q:1067
+msgid "residual"
+msgstr ""
+
+#: src/crosstabs.q:1068
+msgid "std. resid."
+msgstr ""
+
+#: src/crosstabs.q:1069
+msgid "adj. resid."
+msgstr ""
+
+#: src/crosstabs.q:1102 src/crosstabs.q:1129 src/crosstabs.q:1149
+#: src/crosstabs.q:1170 src/examine.q:1365
+msgid "Statistic"
+msgstr ""
+
+#: src/crosstabs.q:1103 src/crosstabs.q:1130 src/crosstabs.q:1150
+#: src/crosstabs.q:1172 src/examine.q:1134 src/frequencies.q:1143
+#: src/frequencies.q:1264 src/sysfile-info.c:536 src/vfm.c:811
+msgid "Value"
+msgstr ""
+
+#: src/crosstabs.q:1104 src/oneway.q:284 src/oneway.q:686 src/t-test.q:977
+#: src/t-test.q:1169 src/t-test.q:1261
+msgid "df"
+msgstr ""
+
+#: src/crosstabs.q:1106
+msgid "Asymp. Sig. (2-sided)"
+msgstr ""
+
+#: src/crosstabs.q:1108
+msgid "Exact. Sig. (2-sided)"
+msgstr ""
+
+#: src/crosstabs.q:1110
+msgid "Exact. Sig. (1-sided)"
+msgstr ""
+
+#: src/crosstabs.q:1128 src/crosstabs.q:1169
+msgid "Category"
+msgstr ""
+
+#: src/crosstabs.q:1131 src/crosstabs.q:1173
+msgid "Asymp. Std. Error"
+msgstr ""
+
+#: src/crosstabs.q:1132 src/crosstabs.q:1174
+msgid "Approx. T"
+msgstr ""
+
+#: src/crosstabs.q:1133 src/crosstabs.q:1175
+msgid "Approx. Sig."
+msgstr ""
+
+#: src/crosstabs.q:1148
+#, c-format
+msgid " 95%% Confidence Interval"
+msgstr ""
+
+#: src/crosstabs.q:1151 src/t-test.q:981 src/t-test.q:1166 src/t-test.q:1264
+msgid "Lower"
+msgstr ""
+
+#: src/crosstabs.q:1152 src/t-test.q:982 src/t-test.q:1167 src/t-test.q:1265
+msgid "Upper"
+msgstr ""
+
+#: src/crosstabs.q:1171
+msgid "Type"
+msgstr ""
+
+#: src/crosstabs.q:1920
+msgid "Pearson Chi-Square"
+msgstr ""
+
+#: src/crosstabs.q:1921
+msgid "Likelihood Ratio"
+msgstr ""
+
+#: src/crosstabs.q:1922
+msgid "Fisher's Exact Test"
+msgstr ""
+
+#: src/crosstabs.q:1923
+msgid "Continuity Correction"
+msgstr ""
+
+#: src/crosstabs.q:1924
+msgid "Linear-by-Linear Association"
+msgstr ""
+
+#: src/crosstabs.q:1961 src/crosstabs.q:2031 src/crosstabs.q:2090
+msgid "N of Valid Cases"
+msgstr ""
+
+#: src/crosstabs.q:1977 src/crosstabs.q:2106
+msgid "Nominal by Nominal"
+msgstr ""
+
+#: src/crosstabs.q:1978 src/crosstabs.q:2107
+msgid "Ordinal by Ordinal"
+msgstr ""
+
+#: src/crosstabs.q:1979
+msgid "Interval by Interval"
+msgstr ""
+
+#: src/crosstabs.q:1980
+msgid "Measure of Agreement"
+msgstr ""
+
+#: src/crosstabs.q:1985
+msgid "Phi"
+msgstr ""
+
+#: src/crosstabs.q:1986
+msgid "Cramer's V"
+msgstr ""
+
+#: src/crosstabs.q:1987
+msgid "Contingency Coefficient"
+msgstr ""
+
+#: src/crosstabs.q:1988
+msgid "Kendall's tau-b"
+msgstr ""
+
+#: src/crosstabs.q:1989
+msgid "Kendall's tau-c"
+msgstr ""
+
+#: src/crosstabs.q:1990
+msgid "Gamma"
+msgstr ""
+
+#: src/crosstabs.q:1991
+msgid "Spearman Correlation"
+msgstr ""
+
+#: src/crosstabs.q:1992
+msgid "Pearson's R"
+msgstr ""
+
+#: src/crosstabs.q:1993
+msgid "Kappa"
+msgstr ""
+
+#: src/crosstabs.q:2063
+#, c-format
+msgid "Odds Ratio for %s (%g / %g)"
+msgstr ""
+
+#: src/crosstabs.q:2066
+#, c-format
+msgid "Odds Ratio for %s (%.*s / %.*s)"
+msgstr ""
+
+#: src/crosstabs.q:2074
+#, c-format
+msgid "For cohort %s = %g"
+msgstr ""
+
+#: src/crosstabs.q:2077
+#, c-format
+msgid "For cohort %s = %.*s"
+msgstr ""
+
+#: src/crosstabs.q:2108
+msgid "Nominal by Interval"
+msgstr ""
+
+#: src/crosstabs.q:2113
+msgid "Lambda"
+msgstr ""
+
+#: src/crosstabs.q:2114
+msgid "Goodman and Kruskal tau"
+msgstr ""
+
+#: src/crosstabs.q:2115
+msgid "Uncertainty Coefficient"
+msgstr ""
+
+#: src/crosstabs.q:2116
+msgid "Somers' d"
+msgstr ""
+
+#: src/crosstabs.q:2117
+msgid "Eta"
+msgstr ""
+
+#: src/crosstabs.q:2122
+msgid "Symmetric"
+msgstr ""
+
+#: src/crosstabs.q:2123 src/crosstabs.q:2124
+#, c-format
+msgid "%s Dependent"
msgstr ""
#: src/data-in.c:61
+msgid "data-file error: "
+msgstr ""
+
+#: src/data-in.c:63
#, c-format
msgid "(column %d"
msgstr ""
-#: src/data-in.c:63
+#: src/data-in.c:65
#, c-format
msgid "(columns %d-%d"
msgstr ""
-#: src/data-in.c:64
+#: src/data-in.c:66
#, c-format
msgid ", field type %s) "
msgstr ""
-#: src/data-in.c:210
+#: src/data-in.c:212
msgid "Field does not form a valid floating-point constant."
msgstr ""
msgid "Unrecognized character in field."
msgstr ""
-#: src/data-in.c:343 src/data-in.c:596
+#: src/data-in.c:343 src/data-in.c:598
msgid "Field must have even length."
msgstr ""
-#: src/data-in.c:353 src/data-in.c:606
+#: src/data-in.c:353 src/data-in.c:608
msgid "Field must contain only hex digits."
msgstr ""
msgid "Error in syntax of zoned decimal number."
msgstr ""
-#: src/data-in.c:646
+#: src/data-in.c:648
msgid "Unexpected end of field."
msgstr ""
-#: src/data-in.c:672
+#: src/data-in.c:674
msgid "Digit expected in field."
msgstr ""
-#: src/data-in.c:697
+#: src/data-in.c:699
#, c-format
msgid "Day (%ld) must be between 1 and 31."
msgstr ""
-#: src/data-in.c:722
+#: src/data-in.c:724
msgid "Delimiter expected between fields in date."
msgstr ""
-#: src/data-in.c:755
+#: src/data-in.c:757
#, c-format
msgid "Parse error at `%c' expecting %s."
msgstr ""
-#: src/data-in.c:769
+#: src/data-in.c:771
#, c-format
msgid "Unknown %s `%.*s'."
msgstr ""
-#: src/data-in.c:819
+#: src/data-in.c:821
#, c-format
msgid "Month (%ld) must be between 1 and 12."
msgstr ""
-#: src/data-in.c:823
+#: src/data-in.c:825
msgid "month"
msgstr ""
-#: src/data-in.c:837
+#: src/data-in.c:839
#, c-format
msgid "Year (%ld) must be between 1582 and 19999."
msgstr ""
-#: src/data-in.c:848
+#: src/data-in.c:850
#, c-format
msgid "Trailing garbage \"%s\" following date."
msgstr ""
-#: src/data-in.c:863
+#: src/data-in.c:865
#, c-format
msgid "Julian day (%d) must be between 1 and 366."
msgstr ""
-#: src/data-in.c:875
+#: src/data-in.c:877
#, c-format
msgid "Year (%d) must be between 1582 and 19999."
msgstr ""
-#: src/data-in.c:891
+#: src/data-in.c:893
#, c-format
msgid "Quarter (%ld) must be between 1 and 4."
msgstr ""
-#: src/data-in.c:901
+#: src/data-in.c:903
msgid "`Q' expected between quarter and year."
msgstr ""
-#: src/data-in.c:917
+#: src/data-in.c:919
#, c-format
msgid "Week (%ld) must be between 1 and 53."
msgstr ""
-#: src/data-in.c:928
+#: src/data-in.c:930
msgid "`WK' expected between week and year."
msgstr ""
-#: src/data-in.c:950
+#: src/data-in.c:952
msgid "Delimiter expected between fields in time."
msgstr ""
-#: src/data-in.c:962
+#: src/data-in.c:964
#, c-format
msgid "Hour (%ld) must be positive."
msgstr ""
-#: src/data-in.c:974
+#: src/data-in.c:976
#, c-format
msgid "Minute (%ld) must be between 0 and 59."
msgstr ""
-#: src/data-in.c:1021
+#: src/data-in.c:1023
#, c-format
msgid "Hour (%ld) must be between 0 and 23."
msgstr ""
-#: src/data-in.c:1049
+#: src/data-in.c:1051
msgid "weekday"
msgstr ""
-#: src/data-in.c:1380
+#: src/data-in.c:1382
#, c-format
msgid "Field too long (%d characters). Truncated after character %d."
msgstr ""
-#: src/data-list.c:141
+#: src/data-list.c:144
msgid ""
"DATA LIST may not use a different file from that specified on its "
"surrounding FILE TYPE."
msgstr ""
-#: src/data-list.c:160
+#: src/data-list.c:163
msgid "The END subcommand may only be specified once."
msgstr ""
-#: src/data-list.c:195
+#: src/data-list.c:198
msgid "Only one of FIXED, FREE, or LIST may be specified."
msgstr ""
-#: src/data-list.c:351 src/print.c:296
+#: src/data-list.c:354 src/print.c:299
#, c-format
msgid ""
"The record number specified, %ld, is before the previous record, %d. Data "
"fields must be listed in order of increasing record number."
msgstr ""
-#: src/data-list.c:380 src/data-list.c:1727
+#: src/data-list.c:383 src/data-list.c:1747
msgid ""
"SPSS-like or FORTRAN-like format specification expected after variable names."
msgstr ""
-#: src/data-list.c:391
+#: src/data-list.c:394
msgid "At least one variable must be specified."
msgstr ""
-#: src/data-list.c:396 src/print.c:328
+#: src/data-list.c:399 src/print.c:331
msgid ""
"Variables are specified on records that should not exist according to "
"RECORDS subcommand."
msgstr ""
-#: src/data-list.c:429 src/data-list.c:443 src/print.c:520 src/print.c:533
+#: src/data-list.c:432 src/data-list.c:446 src/print.c:523 src/print.c:536
msgid "Column positions for fields must be positive."
msgstr ""
-#: src/data-list.c:448
+#: src/data-list.c:451
msgid "The ending column for a field must be greater than the starting column."
msgstr ""
-#: src/data-list.c:462 src/print.c:610
+#: src/data-list.c:465 src/print.c:613
#, c-format
msgid "The %d columns %d-%d can't be evenly divided into %d fields."
msgstr ""
-#: src/data-list.c:482 src/print.c:561
+#: src/data-list.c:485 src/print.c:564
msgid "A format specifier on this line has extra characters on the end."
msgstr ""
-#: src/data-list.c:497 src/print.c:577
+#: src/data-list.c:500 src/print.c:580
msgid "The value for number of decimal places must be at least 1."
msgstr ""
-#: src/data-list.c:511 src/print.c:590
+#: src/data-list.c:514 src/print.c:593
#, c-format
msgid "Input format %s doesn't accept decimal places."
msgstr ""
-#: src/data-list.c:558 src/data-list.c:654 src/data-list.c:868
+#: src/data-list.c:561 src/data-list.c:657 src/data-list.c:871
#, c-format
msgid "%s is a duplicate variable name."
msgstr ""
-#: src/data-list.c:563
+#: src/data-list.c:566
#, c-format
msgid "There is already a variable %s of a different type."
msgstr ""
-#: src/data-list.c:570
+#: src/data-list.c:573
#, c-format
msgid "There is already a string variable %s of a different width."
msgstr ""
-#: src/data-list.c:645
+#: src/data-list.c:648
msgid ""
"The number of format specifications exceeds the given number of variable "
"names."
msgstr ""
-#: src/data-list.c:758 src/print.c:765
+#: src/data-list.c:761 src/print.c:768
msgid ""
"There aren't enough format specifications to match the number of variable "
"names given."
msgstr ""
-#: src/data-list.c:785 src/data-list.c:909 src/descript.c:879 src/print.c:796
-#: src/sysfile-info.c:135 src/sysfile-info.c:369 src/vfm.c:809
+#: src/data-list.c:788 src/data-list.c:912 src/descript.c:883 src/print.c:799
+#: src/sysfile-info.c:138 src/sysfile-info.c:372 src/vfm.c:810
msgid "Variable"
msgstr ""
-#: src/data-list.c:786 src/print.c:797
+#: src/data-list.c:789 src/print.c:800
msgid "Record"
msgstr ""
-#: src/data-list.c:787 src/print.c:798
+#: src/data-list.c:790 src/print.c:801
msgid "Columns"
msgstr ""
-#: src/data-list.c:788 src/data-list.c:910 src/print.c:799
+#: src/data-list.c:791 src/data-list.c:913 src/print.c:802
msgid "Format"
msgstr ""
-#: src/data-list.c:804
+#: src/data-list.c:807
#, c-format
msgid "Reading %d record from file %s."
msgid_plural "Reading %d records from file %s."
msgstr[0] ""
msgstr[1] ""
-#: src/data-list.c:808
+#: src/data-list.c:811
#, c-format
msgid "Reading %d record from the command file."
msgid_plural "Reading %d records from the command file."
msgstr[0] ""
msgstr[1] ""
-#: src/data-list.c:926
+#: src/data-list.c:929
#, c-format
msgid "Reading free-form data from file %s."
msgstr ""
-#: src/data-list.c:929
+#: src/data-list.c:932
msgid "Reading free-form data from the command file."
msgstr ""
-#: src/data-list.c:980
+#: src/data-list.c:983
#, c-format
msgid "Quoted string missing terminating `%c'."
msgstr ""
-#: src/data-list.c:1089
+#: src/data-list.c:1092
#, c-format
msgid "Partial case of %d of %d records discarded."
msgstr ""
-#: src/data-list.c:1143
+#: src/data-list.c:1146
#, c-format
msgid "Partial case discarded. The first variable missing was %s."
msgstr ""
-#: src/data-list.c:1187
+#: src/data-list.c:1190
#, c-format
msgid ""
"Missing value(s) for all variables from %s onward. These will be filled "
"with the system-missing value or blanks, as appropriate."
msgstr ""
-#: src/data-list.c:1264
+#: src/data-list.c:1267
msgid "Attempt to read past end of file."
msgstr ""
-#: src/data-list.c:1401
+#: src/data-list.c:1408
msgid ""
"REPEATING DATA must use the same file as its corresponding DATA LIST or FILE "
"TYPE."
msgstr ""
-#: src/data-list.c:1411 src/data-list.c:1446 src/data-list.c:1459
-#: src/data-list.c:1472 src/data-list.c:1505
+#: src/data-list.c:1418 src/data-list.c:1452 src/data-list.c:1465
+#: src/data-list.c:1478 src/data-list.c:1512
#, c-format
msgid "%s subcommand given multiple times."
msgstr ""
-#: src/data-list.c:1435
+#: src/data-list.c:1441
#, c-format
msgid "STARTS beginning column (%d) exceeds STARTS ending column (%d)."
msgstr ""
-#: src/data-list.c:1491
+#: src/data-list.c:1498
#, c-format
msgid "CONTINUED beginning column (%d) exceeds CONTINUED ending column (%d)."
msgstr ""
-#: src/data-list.c:1514
+#: src/data-list.c:1521
#, c-format
msgid "ID beginning column (%ld) must be positive."
msgstr ""
-#: src/data-list.c:1529
+#: src/data-list.c:1536
#, c-format
msgid "ID ending column (%ld) must be positive."
msgstr ""
-#: src/data-list.c:1535
+#: src/data-list.c:1542
#, c-format
msgid "ID ending column (%ld) cannot be less than ID beginning column (%d)."
msgstr ""
-#: src/data-list.c:1575
+#: src/data-list.c:1582
msgid "Missing required specification STARTS."
msgstr ""
-#: src/data-list.c:1577
+#: src/data-list.c:1584
msgid "Missing required specification OCCURS."
msgstr ""
-#: src/data-list.c:1584
+#: src/data-list.c:1591
msgid "ID specified without CONTINUED."
msgstr ""
-#: src/data-list.c:1676
+#: src/data-list.c:1602
+#, c-format
+msgid ""
+"STARTS beginning column (%d) exceeds default STARTS ending column taken from "
+"file's record width (%d)."
+msgstr ""
+
+#: src/data-list.c:1615
+#, c-format
+msgid ""
+"CONTINUED beginning column (%d) exceeds default CONTINUED ending column "
+"taken from file's record width (%d)."
+msgstr ""
+
+#: src/data-list.c:1696
msgid "String variable not allowed here."
msgstr ""
-#: src/data-list.c:1686
+#: src/data-list.c:1706
#, c-format
msgid "%s (%d) must be at least 1."
msgstr ""
-#: src/data-list.c:1692
+#: src/data-list.c:1712
#, c-format
msgid "Variable or integer expected for %s."
msgstr ""
-#: src/data-list.c:1825
+#: src/data-list.c:1837
#, c-format
msgid "Encountered mismatched record ID \"%s\" expecting \"%s\"."
msgstr ""
-#: src/data-list.c:1857
+#: src/data-list.c:1869
#, c-format
msgid ""
"Variable %s starting in column %d extends beyond physical record length of %"
"d."
msgstr ""
-#: src/data-list.c:1925
+#: src/data-list.c:1937
#, c-format
msgid "Invalid value %d for OCCURS."
msgstr ""
-#: src/data-list.c:1931
+#: src/data-list.c:1943
#, c-format
msgid "Beginning column for STARTS (%d) must be at least 1."
msgstr ""
-#: src/data-list.c:1939
+#: src/data-list.c:1951
#, c-format
msgid "Ending column for STARTS (%d) is less than beginning column (%d)."
msgstr ""
-#: src/data-list.c:1947
+#: src/data-list.c:1959
#, c-format
msgid "Invalid value %d for LENGTH."
msgstr ""
-#: src/data-list.c:1954
+#: src/data-list.c:1966
#, c-format
msgid "Beginning column for CONTINUED (%d) must be at least 1."
msgstr ""
-#: src/data-list.c:1962
+#: src/data-list.c:1974
#, c-format
msgid "Ending column for CONTINUED (%d) is less than beginning column (%d)."
msgstr ""
-#: src/data-list.c:1994
+#: src/data-list.c:2006
#, c-format
msgid ""
"Number of repetitions specified on OCCURS (%d) exceed number of repetitions "
"available in space on STARTS (%d), and CONTINUED not specified."
msgstr ""
-#: src/data-list.c:2012
+#: src/data-list.c:2024
#, c-format
msgid "Unexpected end of file with %d repetitions remaining out of %d."
msgstr ""
-#: src/data-out.c:242
+#: src/data-out.c:245
msgid ""
"The N output format cannot be used to output a negative number or the system-"
"missing value."
msgstr ""
-#: src/data-out.c:356
+#: src/data-out.c:359
#, c-format
msgid ""
"Quality of zoned decimal (Z) output format code is suspect. Check your "
"results. Report bugs to %s."
msgstr ""
-#: src/data-out.c:364
+#: src/data-out.c:367
msgid "The system-missing value cannot be output as a zoned decimal number."
msgstr ""
-#: src/data-out.c:377
+#: src/data-out.c:380
#, c-format
msgid "Number %g too big to fit in field with format Z%d.%d."
msgstr ""
-#: src/data-out.c:771
+#: src/data-out.c:774
#, c-format
msgid "Time value %g too large in magnitude to convert to alphanumeric time."
msgstr ""
-#: src/data-out.c:822
+#: src/data-out.c:825
#, c-format
msgid "Weekday index %f does not lie between 1 and 7."
msgstr ""
-#: src/data-out.c:842
+#: src/data-out.c:845
#, c-format
msgid "Month index %f does not lie between 1 and 12."
msgstr ""
-#: src/data-out.c:955
+#: src/data-out.c:958
#, c-format
msgid ""
"Year %d cannot be represented in four digits for output formatting purposes."
msgstr ""
-#: src/date.c:32
+#: src/date.c:35
msgid "Only USE ALL is currently implemented."
msgstr ""
-#: src/descript.c:99 src/examine.q:1466 src/frequencies.q:112 src/oneway.q:394
-#: src/t-test.q:676 src/t-test.q:699 src/t-test.q:822 src/t-test.q:1159
+#: src/descript.c:103 src/examine.q:1470 src/frequencies.q:117
+#: src/oneway.q:398 src/t-test.q:680 src/t-test.q:703 src/t-test.q:826
+#: src/t-test.q:1163
msgid "Mean"
msgstr ""
-#: src/descript.c:100
+#: src/descript.c:104
msgid "S E Mean"
msgstr ""
-#: src/descript.c:101 src/frequencies.q:116
+#: src/descript.c:105 src/frequencies.q:121
msgid "Std Dev"
msgstr ""
-#: src/descript.c:102 src/examine.q:1546 src/frequencies.q:117
+#: src/descript.c:106 src/examine.q:1550 src/frequencies.q:122
msgid "Variance"
msgstr ""
-#: src/descript.c:103 src/examine.q:1653 src/frequencies.q:118
+#: src/descript.c:107 src/examine.q:1657 src/frequencies.q:123
msgid "Kurtosis"
msgstr ""
-#: src/descript.c:104
+#: src/descript.c:108
msgid "S E Kurt"
msgstr ""
-#: src/descript.c:105 src/examine.q:1633 src/frequencies.q:120
+#: src/descript.c:109 src/examine.q:1637 src/frequencies.q:125
msgid "Skewness"
msgstr ""
-#: src/descript.c:106
+#: src/descript.c:110
msgid "S E Skew"
msgstr ""
-#: src/descript.c:107 src/examine.q:1594 src/frequencies.q:122
+#: src/descript.c:111 src/examine.q:1598 src/frequencies.q:127
msgid "Range"
msgstr ""
-#: src/descript.c:108 src/examine.q:1571 src/frequencies.q:123
-#: src/oneway.q:406
+#: src/descript.c:112 src/examine.q:1575 src/frequencies.q:128
+#: src/oneway.q:410
msgid "Minimum"
msgstr ""
-#: src/descript.c:109 src/examine.q:1582 src/frequencies.q:124
-#: src/oneway.q:407
+#: src/descript.c:113 src/examine.q:1586 src/frequencies.q:129
+#: src/oneway.q:411
msgid "Maximum"
msgstr ""
-#: src/descript.c:110 src/frequencies.q:125
+#: src/descript.c:114 src/frequencies.q:130
msgid "Sum"
msgstr ""
-#: src/descript.c:333
+#: src/descript.c:337
#, c-format
msgid "Z-score variable name %s would be a duplicate variable name."
msgstr ""
-#: src/descript.c:351 src/list.q:142
+#: src/descript.c:355 src/list.q:146
msgid "No variables specified."
msgstr ""
-#: src/descript.c:435
+#: src/descript.c:439
msgid "expecting statistic name: reverting to default"
msgstr ""
-#: src/descript.c:507
+#: src/descript.c:511
msgid ""
"Ran out of generic names for Z-score variables. There are only 126 generic "
"names: ZSC001-ZSC0999, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09."
msgstr ""
-#: src/descript.c:538
+#: src/descript.c:542
msgid "Mapping of variables to corresponding Z-scores."
msgstr ""
-#: src/descript.c:543
+#: src/descript.c:547
msgid "Source"
msgstr ""
-#: src/descript.c:544
+#: src/descript.c:548
msgid "Target"
msgstr ""
-#: src/descript.c:663 src/descript.c:669
+#: src/descript.c:667 src/descript.c:673
msgid "Z-score of "
msgstr ""
-#: src/descript.c:882
+#: src/descript.c:886
msgid "Valid N"
msgstr ""
-#: src/descript.c:883
+#: src/descript.c:887
msgid "Missing N"
msgstr ""
-#: src/descript.c:909
+#: src/descript.c:913
#, c-format
msgid "Valid cases = %g; cases with missing value(s) = %g."
msgstr ""
-#: src/devind.c:136
+#: src/devind.c:139
#, c-format
msgid "DEVIND driver initializing as `%s'..."
msgstr ""
-#: src/devind.c:218
+#: src/devind.c:221
#, c-format
msgid "Unknown configuration parameter `%s' for DEVIND device driver."
msgstr ""
-#: src/devind.c:240
+#: src/devind.c:243
#, c-format
msgid "DEVIND output driver: %s: %s"
msgstr ""
-#: src/devind.c:271
+#: src/devind.c:274
#, c-format
msgid "Cannot open first page on DEVIND device %s."
msgstr ""
-#: src/dfm-read.c:153
+#: src/dfm-read.c:157
#, c-format
msgid "Could not open \"%s\" for reading as a data file: %s."
msgstr ""
-#: src/dfm-read.c:186 src/dfm-read.c:204
+#: src/dfm-read.c:190 src/dfm-read.c:208
msgid "BEGIN DATA expected."
msgstr ""
-#: src/dfm-read.c:213
+#: src/dfm-read.c:217
msgid ""
"Unexpected end-of-file while reading data in BEGIN DATA. This probably "
"indicates a missing or misformatted END DATA command. END DATA must appear "
"by itself on a single line with exactly one space between words."
msgstr ""
-#: src/dfm-read.c:246 src/dfm-read.c:266
+#: src/dfm-read.c:250 src/dfm-read.c:270
#, c-format
msgid "Error reading file %s: %s."
msgstr ""
-#: src/dfm-read.c:269
+#: src/dfm-read.c:273
#, c-format
msgid "%s: Partial record at end of file."
msgstr ""
-#: src/dfm-read.c:312
+#: src/dfm-read.c:316
#, c-format
msgid "Attempt to read beyond end-of-file on file %s."
msgstr ""
-#: src/dfm-read.c:315
+#: src/dfm-read.c:319
msgid "Attempt to read beyond END DATA."
msgstr ""
-#: src/dfm-read.c:462
+#: src/dfm-read.c:466
msgid ""
"This command is not valid here since the current input program does not "
"access the inline file."
msgstr ""
-#: src/dfm-write.c:67
+#: src/dfm-write.c:70
#, c-format
msgid "An error occurred while opening \"%s\" for writing as a data file: %s."
msgstr ""
-#: src/dfm-write.c:103
+#: src/dfm-write.c:106
#, c-format
msgid "Error writing file %s: %s."
msgstr ""
-#: src/dictionary.c:682
+#: src/dictionary.c:685
msgid ""
"At least one case in the data file had a weight value that was user-missing, "
"system-missing, zero, or negative. These case(s) were ignored."
msgstr ""
-#: src/do-if.c:113
+#: src/do-if.c:116
msgid "There is no DO IF to match with this ELSE IF."
msgstr ""
-#: src/do-if.c:118
+#: src/do-if.c:121
msgid "The ELSE command must follow all ELSE IF commands in a DO IF structure."
msgstr ""
-#: src/do-if.c:141
+#: src/do-if.c:144
msgid "End of command expected."
msgstr ""
-#: src/do-if.c:157
+#: src/do-if.c:160
msgid "There is no DO IF to match with this ELSE."
msgstr ""
-#: src/do-if.c:163
+#: src/do-if.c:166
msgid ""
"There may be at most one ELSE clause in each DO IF structure. It must be "
"the last clause."
msgstr ""
-#: src/do-if.c:198
+#: src/do-if.c:201
msgid "There is no DO IF to match with this END IF."
msgstr ""
-#: src/do-if.c:284
+#: src/do-if.c:287
#, c-format
msgid "DO IF %d: true\n"
msgstr ""
-#: src/do-if.c:289
+#: src/do-if.c:292
#, c-format
msgid "DO IF %d: false\n"
msgstr ""
-#: src/do-if.c:294
+#: src/do-if.c:297
#, c-format
msgid "DO IF %d: missing\n"
msgstr ""
-#: src/error.c:93
+#: src/error.c:97
msgid "Terminating NOW due to a fatal error!"
msgstr ""
-#: src/error.c:170
+#: src/error.c:174
msgid "Terminating execution of syntax file due to error."
msgstr ""
-#: src/error.c:172
+#: src/error.c:176
#, c-format
msgid "Errors (%d) exceeds limit (%d)."
msgstr ""
-#: src/error.c:175
+#: src/error.c:179
#, c-format
msgid "Warnings (%d) exceed limit (%d)."
msgstr ""
-#: src/error.c:237
+#: src/error.c:243
msgid "fatal"
msgstr ""
-#: src/error.c:239 src/error.c:246 src/error.c:249
+#: src/error.c:245 src/error.c:252 src/error.c:255
msgid "error"
msgstr ""
-#: src/error.c:240 src/error.c:247 src/error.c:250
+#: src/error.c:246 src/error.c:253 src/error.c:256
msgid "warning"
msgstr ""
-#: src/error.c:241 src/error.c:251
+#: src/error.c:247 src/error.c:257
msgid "note"
msgstr ""
-#: src/error.c:243 src/error.c:244
+#: src/error.c:249 src/error.c:250
msgid "installation error"
msgstr ""
-#: src/filename.c:221
+#: src/examine.q:471 src/examine.q:483
#, c-format
-msgid "Searching for `%s'..."
+msgid "%s and %s are mutually exclusive"
msgstr ""
-#: src/filename.c:229 src/filename.c:261
-msgid "Search unsuccessful!"
+#: src/examine.q:913
+msgid "Case Processing Summary"
msgstr ""
-#: src/filename.c:254
-#, c-format
-msgid "Found `%s'."
+#: src/examine.q:1119
+msgid "Extreme Values"
msgstr ""
-#: src/filename.c:686
-#, c-format
-msgid "Not opening pipe file `%s' because SAFER option set."
+#: src/examine.q:1135
+msgid "Case Number"
msgstr ""
-#: src/file-type.c:131
-msgid "MIXED, GROUPED, or NESTED expected."
+#: src/examine.q:1220
+msgid "Highest"
msgstr ""
-#: src/file-type.c:154
-msgid "The CASE subcommand is not valid on FILE TYPE MIXED."
+#: src/examine.q:1225
+msgid "Lowest"
msgstr ""
-#: src/file-type.c:172
-msgid "WARN or NOWARN expected after WILD."
+#: src/examine.q:1366 src/oneway.q:400 src/oneway.q:684
+msgid "Std. Error"
msgstr ""
-#: src/file-type.c:180
-msgid "The DUPLICATE subcommand is not valid on FILE TYPE MIXED."
+#: src/examine.q:1368 src/oneway.q:414
+msgid "Descriptives"
msgstr ""
-#: src/file-type.c:194
-msgid "DUPLICATE=CASE is only valid on FILE TYPE NESTED."
+#: src/examine.q:1488 src/oneway.q:405
+#, c-format
+msgid "%g%% Confidence Interval for Mean"
msgstr ""
-#: src/file-type.c:203
+#: src/examine.q:1494 src/oneway.q:407
+msgid "Lower Bound"
+msgstr ""
+
+#: src/examine.q:1505 src/oneway.q:408
+msgid "Upper Bound"
+msgstr ""
+
+#: src/examine.q:1517
+#, c-format
+msgid "5%% Trimmed Mean"
+msgstr ""
+
+#: src/examine.q:1528 src/frequencies.q:119
+msgid "Median"
+msgstr ""
+
+#: src/examine.q:1562 src/oneway.q:399 src/t-test.q:681 src/t-test.q:704
+#: src/t-test.q:828 src/t-test.q:1164
+msgid "Std. Deviation"
+msgstr ""
+
+#: src/examine.q:1610
+msgid "Interquartile Range"
+msgstr ""
+
+#: src/examine.q:1762
+#, c-format
+msgid "Boxplot of %s vs. %s"
+msgstr ""
+
+#: src/examine.q:1787
+msgid "Boxplot"
+msgstr ""
+
+#: src/examine.q:1829
+#, c-format
+msgid "Normal Q-Q Plot of %s"
+msgstr ""
+
+#: src/examine.q:1830 src/examine.q:1836
+msgid "Observed Value"
+msgstr ""
+
+#: src/examine.q:1831
+msgid "Expected Normal"
+msgstr ""
+
+#: src/examine.q:1834
+#, c-format
+msgid "Detrended Normal Q-Q Plot of %s"
+msgstr ""
+
+#: src/examine.q:1837
+msgid "Dev from Normal"
+msgstr ""
+
+#: src/examine.q:1956 src/examine.q:1978 src/frequencies.q:1525
+msgid "Percentiles"
+msgstr ""
+
+#: src/examine.q:2103
+msgid "Tukey's Hinges"
+msgstr ""
+
+#: src/expressions/evaluate.c:144
+msgid "expecting number or string"
+msgstr ""
+
+#: src/expressions/evaluate.c:155 src/pfm-read.c:537
+#, c-format
+msgid "Duplicate variable name %s."
+msgstr ""
+
+#: src/expressions/helpers.c:36
+msgid ""
+"One of the arguments to a DATE function is not an integer. The result will "
+"be system-missing."
+msgstr ""
+
+#: src/expressions/helpers.c:58
+msgid ""
+"The week argument to DATE.WKYR is not an integer. The result will be system-"
+"missing."
+msgstr ""
+
+#: src/expressions/helpers.c:64
+msgid ""
+"The week argument to DATE.WKYR is outside the acceptable range of 1 to 53. "
+"The result will be system-missing."
+msgstr ""
+
+#: src/expressions/helpers.c:86
+msgid ""
+"The day argument to DATE.YRDAY is not an integer. The result will be system-"
+"missing."
+msgstr ""
+
+#: src/expressions/helpers.c:92
+msgid ""
+"The day argument to DATE.YRDAY is outside the acceptable range of 1 to 366. "
+"The result will be system-missing."
+msgstr ""
+
+#: src/expressions/helpers.c:114
+msgid ""
+"The year argument to YRMODA is greater than 47516. The result will be "
+"system-missing."
+msgstr ""
+
+#: src/expressions/parse.c:241
+#, c-format
+msgid ""
+"Type mismatch: expression has %s type, but a numeric value is required here."
+msgstr ""
+
+#: src/expressions/parse.c:253
+#, c-format
+msgid ""
+"Type mismatch: expression has %s type, but a string value is required here."
+msgstr ""
+
+#: src/expressions/parse.c:394
+#, c-format
+msgid "Type mismatch while applying %s operator: cannot convert %s to %s."
+msgstr ""
+
+#: src/expressions/parse.c:599
+msgid ""
+"Chaining relational operators (e.g. \"a < b < c\") will not produce the "
+"mathematically expected result. Use the AND logical operator to fix the "
+"problem (e.g. \"a < b AND b < c\"). If chaining is really intended, "
+"parentheses will disable this warning (e.g. \"(a < b) < c\".)"
+msgstr ""
+
+#: src/expressions/parse.c:698
+msgid ""
+"The exponentiation operator (\"**\") is left-associative, even though right-"
+"associative semantics are more useful. That is, \"a**b**c\" equals \"(a**b)"
+"**c\", not as \"a**(b**c)\". To disable this warning, insert parentheses."
+msgstr ""
+
+#: src/expressions/parse.c:760
+#, c-format
+msgid "Unknown system variable %s."
+msgstr ""
+
+#: src/expressions/parse.c:802
+#, c-format
+msgid "Unknown identifier %s."
+msgstr ""
+
+#: src/expressions/parse.c:837
+msgid "in expression"
+msgstr ""
+
+#: src/expressions/parse.c:1013
+#, c-format
+msgid "%s must have at least %d arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1022
+#, c-format
+msgid "%s must have even number of arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1025
+#, c-format
+msgid "%s must have multiple of %d arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1035
+#, c-format
+msgid "%s function does not accept a minimum valid argument count."
+msgstr ""
+
+#: src/expressions/parse.c:1044
+#, c-format
+msgid "%s requires at least %d valid arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1050
+#, c-format
+msgid ""
+"With %s, using minimum valid argument count of %d does not make sense when "
+"passing only %d arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1104
+#, c-format
+msgid "Type mismatch invoking %s as "
+msgstr ""
+
+#: src/expressions/parse.c:1109
+msgid "Function invocation "
+msgstr ""
+
+#: src/expressions/parse.c:1111
+msgid " does not match any known function. Candidates are:"
+msgstr ""
+
+#: src/expressions/parse.c:1141
+#, c-format
+msgid "No function or vector named %s."
+msgstr ""
+
+#: src/expressions/parse.c:1183
+#, c-format
+msgid "expecting `,' or `)' invoking %s function"
+msgstr ""
+
+#: src/expressions/parse.c:1203
+#, c-format
+msgid "%s is a PSPP extension."
+msgstr ""
+
+#: src/file-handle.q:127
+#, c-format
+msgid ""
+"File handle %s already refers to file %s. File handles cannot be redefined "
+"within a session."
+msgstr ""
+
+#: src/file-handle.q:148
+msgid "The FILE HANDLE required subcommand NAME is not present."
+msgstr ""
+
+#: src/file-handle.q:167
+msgid ""
+"Fixed-length records were specified on /RECFORM, but record length was not "
+"specified on /LRECL. Assuming 1024-character records."
+msgstr ""
+
+#: src/file-handle.q:174
+#, c-format
+msgid ""
+"Record length (%ld) must be at least one byte. 1-character records will be "
+"assumed."
+msgstr ""
+
+#: src/file-handle.q:274
+#, c-format
+msgid "Can't open %s as a %s because it is already open as a %s"
+msgstr ""
+
+#: src/file-handle.q:281
+#, c-format
+msgid "Can't open %s as a %s for %s because it is already open for %s"
+msgstr ""
+
+#: src/file-handle.q:289
+#, c-format
+msgid "Can't re-open %s as a %s for %s"
+msgstr ""
+
+#: src/file-handle.q:342
+msgid "expecting a file name or handle name"
+msgstr ""
+
+#: src/file-type.c:134
+msgid "MIXED, GROUPED, or NESTED expected."
+msgstr ""
+
+#: src/file-type.c:157
+msgid "The CASE subcommand is not valid on FILE TYPE MIXED."
+msgstr ""
+
+#: src/file-type.c:175
+msgid "WARN or NOWARN expected after WILD."
+msgstr ""
+
+#: src/file-type.c:183
+msgid "The DUPLICATE subcommand is not valid on FILE TYPE MIXED."
+msgstr ""
+
+#: src/file-type.c:197
+msgid "DUPLICATE=CASE is only valid on FILE TYPE NESTED."
+msgstr ""
+
+#: src/file-type.c:206
#, c-format
msgid "WARN%s expected after DUPLICATE."
msgstr ""
-#: src/file-type.c:204
+#: src/file-type.c:207
msgid ", NOWARN, or CASE"
msgstr ""
-#: src/file-type.c:205
+#: src/file-type.c:208
msgid " or NOWARN"
msgstr ""
-#: src/file-type.c:213
+#: src/file-type.c:216
msgid "The MISSING subcommand is not valid on FILE TYPE MIXED."
msgstr ""
-#: src/file-type.c:225
+#: src/file-type.c:228
msgid "WARN or NOWARN after MISSING."
msgstr ""
-#: src/file-type.c:233
+#: src/file-type.c:236
msgid "ORDERED is only valid on FILE TYPE GROUPED."
msgstr ""
-#: src/file-type.c:244
+#: src/file-type.c:247
msgid "YES or NO expected after ORDERED."
msgstr ""
-#: src/file-type.c:250 src/file-type.c:545
+#: src/file-type.c:253 src/file-type.c:548
msgid "while expecting a valid subcommand"
msgstr ""
-#: src/file-type.c:257
+#: src/file-type.c:260
msgid "The required RECORD subcommand was not present."
msgstr ""
-#: src/file-type.c:265
+#: src/file-type.c:268
msgid "The required CASE subcommand was not present."
msgstr ""
-#: src/file-type.c:271
+#: src/file-type.c:274
msgid "CASE and RECORD must specify different variable names."
msgstr ""
-#: src/file-type.c:329
+#: src/file-type.c:332
msgid "Column value must be positive."
msgstr ""
-#: src/file-type.c:345
+#: src/file-type.c:348
msgid "Ending column precedes beginning column."
msgstr ""
-#: src/file-type.c:365
+#: src/file-type.c:368
msgid "Bad format specifier name."
msgstr ""
-#: src/file-type.c:394 src/file-type.c:583
+#: src/file-type.c:397 src/file-type.c:586
msgid ""
"This command may only appear within a FILE TYPE/END FILE TYPE structure."
msgstr ""
-#: src/file-type.c:417
+#: src/file-type.c:420
msgid "OTHER may appear only on the last RECORD TYPE command."
msgstr ""
-#: src/file-type.c:427
+#: src/file-type.c:430
msgid "No input commands (DATA LIST, REPEATING DATA) for above RECORD TYPE."
msgstr ""
-#: src/file-type.c:478
+#: src/file-type.c:481
msgid ""
"The CASE subcommand is not allowed on the RECORD TYPE command for FILE TYPE "
"MIXED."
msgstr ""
-#: src/file-type.c:488
+#: src/file-type.c:491
msgid ""
"No variable name may be specified for the CASE subcommand on RECORD TYPE."
msgstr ""
-#: src/file-type.c:496
+#: src/file-type.c:499
msgid ""
"The CASE column specification on RECORD TYPE must give a format specifier "
"that is the same type as that of the CASE column specification given on FILE "
"TYPE."
msgstr ""
-#: src/file-type.c:512
+#: src/file-type.c:515
msgid "WARN or NOWARN expected on DUPLICATE subcommand."
msgstr ""
-#: src/file-type.c:526
+#: src/file-type.c:529
msgid "WARN or NOWARN expected on MISSING subcommand."
msgstr ""
-#: src/file-type.c:539
+#: src/file-type.c:542
msgid "YES or NO expected on SPREAD subcommand."
msgstr ""
-#: src/file-type.c:596
+#: src/file-type.c:599
msgid "No input commands (DATA LIST, REPEATING DATA) on above RECORD TYPE."
msgstr ""
-#: src/file-type.c:603
+#: src/file-type.c:606
msgid "No commands between FILE TYPE and END FILE TYPE."
msgstr ""
-#: src/file-type.c:672
+#: src/file-type.c:675
#, c-format
msgid "Unknown record type \"%.*s\"."
msgstr ""
-#: src/file-type.c:696
+#: src/file-type.c:699
#, c-format
msgid "Unknown record type %g."
msgstr ""
-#: src/flip.c:85
+#: src/filename.c:227
+#, c-format
+msgid "Searching for `%s'..."
+msgstr ""
+
+#: src/filename.c:235 src/filename.c:267
+msgid "Search unsuccessful!"
+msgstr ""
+
+#: src/filename.c:260
+#, c-format
+msgid "Found `%s'."
+msgstr ""
+
+#: src/filename.c:665
+#, c-format
+msgid "Not opening pipe file `%s' because SAFER option set."
+msgstr ""
+
+#: src/flip.c:88
msgid ""
"FLIP ignores TEMPORARY. Temporary transformations will be made permanent."
msgstr ""
-#: src/flip.c:229
+#: src/flip.c:232
#, c-format
msgid "Could not create acceptable variant for variable %s."
msgstr ""
-#: src/flip.c:245
+#: src/flip.c:248
msgid "Cannot create more than 99999 variable names."
msgstr ""
-#: src/flip.c:289
+#: src/flip.c:292
msgid "Could not create temporary file for FLIP."
msgstr ""
-#: src/flip.c:297 src/flip.c:364
+#: src/flip.c:300 src/flip.c:367
#, c-format
msgid "Error writing FLIP file: %s."
msgstr ""
-#: src/flip.c:406
+#: src/flip.c:409
#, c-format
msgid "Error rewinding FLIP file: %s."
msgstr ""
-#: src/flip.c:410
+#: src/flip.c:413
msgid "Error creating FLIP source file."
msgstr ""
-#: src/flip.c:419
+#: src/flip.c:422
#, c-format
msgid "Error reading FLIP file: %s."
msgstr ""
-#: src/flip.c:440
+#: src/flip.c:443
#, c-format
msgid "Error seeking FLIP source file: %s."
msgstr ""
-#: src/flip.c:445
+#: src/flip.c:448
#, c-format
msgid "Error writing FLIP source file: %s."
msgstr ""
-#: src/flip.c:456
+#: src/flip.c:459
#, c-format
msgid "Error rewind FLIP source file: %s."
msgstr ""
-#: src/flip.c:508
+#: src/flip.c:511
#, c-format
msgid "Error reading FLIP temporary file: %s."
msgstr ""
-#: src/flip.c:511
+#: src/flip.c:514
msgid "Unexpected end of file reading FLIP temporary file."
msgstr ""
-#: src/format.c:74
+#: src/format.c:77
msgid "X and T format specifiers not allowed here."
msgstr ""
-#: src/format.c:82
+#: src/format.c:85
#, c-format
msgid "%.*s is not a valid data format."
msgstr ""
-#: src/format.c:131
+#: src/format.c:134
#, c-format
-msgid ""
-"Format %s specifies an odd width %d, but format %s requires an even width."
+msgid "Format %s specifies an odd width %d, but an even width is required."
msgstr ""
-#: src/format.c:139
+#: src/format.c:142
#, c-format
msgid ""
"Format %s specifies a bad number of implied decimal places %d. Input format "
"%s allows up to 16 implied decimal places."
msgstr ""
-#: src/format.c:163
+#: src/format.c:166
#, c-format
msgid "Format %s may not be used for input."
msgstr ""
-#: src/format.c:169
+#: src/format.c:172
#, c-format
msgid ""
"Input format %s specifies a bad width %d. Format %s requires a width "
"between %d and %d."
msgstr ""
-#: src/format.c:179
+#: src/format.c:182
#, c-format
msgid ""
"Input format %s is invalid because it specifies more decimal places than the "
"field width."
msgstr ""
-#: src/format.c:202
+#: src/format.c:205
#, c-format
msgid ""
"Output format %s specifies a bad width %d. Format %s requires a width "
"between %d and %d."
msgstr ""
-#: src/format.c:212
+#: src/format.c:215
#, c-format
msgid ""
"Output format %s is invalid because it specifies as many decimal places as "
"d instead."
msgstr ""
-#: src/format.c:234
+#: src/format.c:237
#, c-format
msgid "%s variables are not compatible with %s format %s."
msgstr ""
-#: src/format.c:235 src/pfm-read.c:473 src/sfm-read.c:1027 src/sfm-read.c:1036
+#: src/format.c:238 src/pfm-read.c:477 src/sfm-read.c:1030 src/sfm-read.c:1039
msgid "String"
msgstr ""
-#: src/format.c:235 src/pfm-read.c:473 src/sfm-read.c:1027 src/sfm-read.c:1036
+#: src/format.c:238 src/pfm-read.c:477 src/sfm-read.c:1030 src/sfm-read.c:1039
msgid "Numeric"
msgstr ""
-#: src/format.c:255
+#: src/format.c:258
#, c-format
msgid "String variable with width %d not compatible with format %s."
msgstr ""
-#: src/format.c:379
+#: src/format.c:382
msgid "Format specifier expected."
msgstr ""
-#: src/format.c:391
+#: src/format.c:394
#, c-format
msgid "Data format %s does not specify a width."
msgstr ""
-#: src/format.c:409
+#: src/format.c:412
#, c-format
msgid "Data format %s is not valid."
msgstr ""
-#: src/formats.c:86
+#: src/formats.c:89
msgid "`(' expected after variable list"
msgstr ""
-#: src/formats.c:96 src/numeric.c:65 src/numeric.c:136
+#: src/formats.c:99 src/numeric.c:68 src/numeric.c:139
msgid "`)' expected after output format."
msgstr ""
-#: src/get.c:246
-#, c-format
-msgid "The required %s subcommand was not present"
+#: src/frequencies.q:118
+msgid "S.E. Mean"
msgstr ""
-#: src/get.c:252
-#, c-format
-msgid "Unsupported sysfile version: %d. Using version %d instead."
+#: src/frequencies.q:120
+msgid "Mode"
msgstr ""
-#: src/get.c:408 src/print.c:179
-msgid "expecting a valid subcommand"
+#: src/frequencies.q:124
+msgid "S.E. Kurt"
msgstr ""
-#: src/get.c:451
-#, c-format
-msgid ""
-"Cannot rename %s as %s because there already exists a variable named %s. To "
-"rename variables with overlapping names, use a single RENAME subcommand such "
-"as \"/RENAME (A=B)(B=C)(C=A)\", or equivalently, \"/RENAME (A B C=B C A)\"."
+#: src/frequencies.q:126
+msgid "S.E. Skew"
msgstr ""
-#: src/get.c:476
-msgid "`=' expected after variable list."
+#: src/frequencies.q:401
+msgid ""
+"At most one of BARCHART, HISTOGRAM, or HBAR should be given. HBAR will be "
+"assumed. Argument values will be given precedence increasing along the "
+"order given."
msgstr ""
-#: src/get.c:483
+#: src/frequencies.q:484
#, c-format
msgid ""
-"Number of variables on left side of `=' (%d) does not match number of "
-"variables on right side (%d), in parenthesized group %d of RENAME subcommand."
+"MAX must be greater than or equal to MIN, if both are specified. However, "
+"MIN was specified as %g and MAX as %g. MIN and MAX will be ignored."
msgstr ""
-#: src/get.c:496
-#, c-format
-msgid "Requested renaming duplicates variable name %s."
+#: src/frequencies.q:807
+msgid ""
+"Upper limit of integer mode value range must be greater than lower limit."
msgstr ""
-#: src/get.c:526
-msgid "Cannot DROP all variables from dictionary."
+#: src/frequencies.q:820
+#, c-format
+msgid "Variable %s specified multiple times on VARIABLES subcommand."
msgstr ""
-#: src/get.c:787
-msgid "The active file may not be specified more than once."
+#: src/frequencies.q:826
+#, c-format
+msgid "Integer mode specified, but %s is not a numeric variable."
msgstr ""
-#: src/get.c:796
-msgid "Cannot specify the active file since no active file has been defined."
+#: src/frequencies.q:892
+msgid "`)' expected after GROUPED interval list."
msgstr ""
-#: src/get.c:804
-msgid ""
-"MATCH FILES may not be used after TEMPORARY when the active file is an input "
-"source. Temporary transformations will be made permanent."
+#: src/frequencies.q:904
+#, c-format
+msgid "Variables %s specified on GROUPED but not on VARIABLES."
msgstr ""
-#: src/get.c:842
-msgid "Multiple IN subcommands for a single FILE or TABLE."
+#: src/frequencies.q:911
+#, c-format
+msgid "Variables %s specified multiple times on GROUPED subcommand."
msgstr ""
-#: src/get.c:862
-msgid "BY may appear at most once."
+#: src/frequencies.q:1142 src/frequencies.q:1234 src/frequencies.q:1235
+#: src/frequencies.q:1267
+msgid "Cum"
msgstr ""
-#: src/get.c:882
-#, c-format
-msgid "File %s lacks BY variable %s."
+#: src/frequencies.q:1144 src/plot-hist.c:129
+msgid "Frequency"
msgstr ""
-#: src/get.c:895
-msgid "FIRST may appear at most once."
+#: src/frequencies.q:1164
+msgid "Value Label"
msgstr ""
-#: src/get.c:909
-msgid "LAST may appear at most once."
+#: src/frequencies.q:1265
+msgid "Freq"
msgstr ""
-#: src/get.c:950
-msgid "BY is required when TABLE is specified."
+#: src/frequencies.q:1266 src/frequencies.q:1268
+msgid "Pct"
msgstr ""
-#: src/get.c:955
-msgid "BY is required when IN is specified."
+#: src/frequencies.q:1487
+#, c-format
+msgid "No valid data for variable %s; statistics not displayed."
+msgstr ""
+
+#: src/get.c:249
+#, c-format
+msgid "The required %s subcommand was not present"
+msgstr ""
+
+#: src/get.c:255
+#, c-format
+msgid "Unsupported sysfile version: %d. Using version %d instead."
+msgstr ""
+
+#: src/get.c:411 src/print.c:182
+msgid "expecting a valid subcommand"
+msgstr ""
+
+#: src/get.c:454
+#, c-format
+msgid ""
+"Cannot rename %s as %s because there already exists a variable named %s. To "
+"rename variables with overlapping names, use a single RENAME subcommand such "
+"as \"/RENAME (A=B)(B=C)(C=A)\", or equivalently, \"/RENAME (A B C=B C A)\"."
+msgstr ""
+
+#: src/get.c:479
+msgid "`=' expected after variable list."
+msgstr ""
+
+#: src/get.c:486
+#, c-format
+msgid ""
+"Number of variables on left side of `=' (%d) does not match number of "
+"variables on right side (%d), in parenthesized group %d of RENAME subcommand."
+msgstr ""
+
+#: src/get.c:499
+#, c-format
+msgid "Requested renaming duplicates variable name %s."
+msgstr ""
+
+#: src/get.c:529
+msgid "Cannot DROP all variables from dictionary."
+msgstr ""
+
+#: src/get.c:790
+msgid "The active file may not be specified more than once."
+msgstr ""
+
+#: src/get.c:799
+msgid "Cannot specify the active file since no active file has been defined."
+msgstr ""
+
+#: src/get.c:807
+msgid ""
+"MATCH FILES may not be used after TEMPORARY when the active file is an input "
+"source. Temporary transformations will be made permanent."
+msgstr ""
+
+#: src/get.c:845
+msgid "Multiple IN subcommands for a single FILE or TABLE."
+msgstr ""
+
+#: src/get.c:865
+msgid "BY may appear at most once."
+msgstr ""
+
+#: src/get.c:885
+#, c-format
+msgid "File %s lacks BY variable %s."
+msgstr ""
+
+#: src/get.c:899
+msgid "FIRST may appear at most once."
+msgstr ""
+
+#: src/get.c:913
+msgid "LAST may appear at most once."
+msgstr ""
+
+#: src/get.c:954
+msgid "BY is required when TABLE is specified."
+msgstr ""
+
+#: src/get.c:959
+msgid "BY is required when IN is specified."
msgstr ""
-#: src/get.c:983
+#: src/get.c:987
#, c-format
msgid "IN variable name %s duplicates an existing variable name."
msgstr ""
-#: src/get.c:1417
+#: src/get.c:1416
#, c-format
msgid ""
"Variable %s in file %s (%s) has different type or width from the same "
"variable in earlier file (%s)."
msgstr ""
-#: src/get.c:1508
+#: src/get.c:1507
msgid "expecting COMM or TAPE"
msgstr ""
-#: src/getline.c:175
+#: src/getl.c:178
#, c-format
msgid "Can't find `%s' in include file search path."
msgstr ""
-#: src/getline.c:330
+#: src/getl.c:333
#, c-format
msgid "%s: Opening as syntax file."
msgstr ""
-#: src/getline.c:335
+#: src/getl.c:338
#, c-format
msgid "Opening `%s': %s."
msgstr ""
-#: src/getline.c:344 src/html.c:348 src/postscript.c:1466
+#: src/getl.c:347 src/html.c:349 src/postscript.c:1461
#, c-format
msgid "Reading `%s': %s."
msgstr ""
-#: src/getline.c:402
+#: src/getl.c:405
#, c-format
msgid "Closing `%s': %s."
msgstr ""
-#: src/groff-font.c:101
+#: src/groff-font.c:105
#, c-format
msgid "%s: Opening Groff font file..."
msgstr ""
-#: src/groff-font.c:155
+#: src/groff-font.c:159
msgid "Missing font name."
msgstr ""
-#: src/groff-font.c:165
+#: src/groff-font.c:169
msgid "Missing encoding filename."
msgstr ""
-#: src/groff-font.c:178
+#: src/groff-font.c:182
msgid "Bad spacewidth value."
msgstr ""
-#: src/groff-font.c:190
+#: src/groff-font.c:194
msgid "Bad slant value."
msgstr ""
-#: src/groff-font.c:215
+#: src/groff-font.c:219
#, c-format
msgid "Unknown ligature `%s'."
msgstr ""
-#: src/groff-font.c:250
+#: src/groff-font.c:254
msgid "Unexpected end of line reading character set."
msgstr ""
-#: src/groff-font.c:258
+#: src/groff-font.c:262
msgid "Can't use ditto mark for first character."
msgstr ""
-#: src/groff-font.c:263
+#: src/groff-font.c:267
msgid "Can't ditto into an unnamed character."
msgstr ""
-#: src/groff-font.c:280
+#: src/groff-font.c:284
#, c-format
msgid "Missing metrics for character `%s'."
msgstr ""
-#: src/groff-font.c:289
+#: src/groff-font.c:293
#, c-format
msgid "Missing type for character `%s'."
msgstr ""
-#: src/groff-font.c:298
+#: src/groff-font.c:302
#, c-format
msgid "Missing code for character `%s'."
msgstr ""
-#: src/groff-font.c:317
+#: src/groff-font.c:321
msgid "Malformed kernpair."
msgstr ""
-#: src/groff-font.c:324
+#: src/groff-font.c:328
msgid "Unexpected end of line reading kernpairs."
msgstr ""
-#: src/groff-font.c:330
+#: src/groff-font.c:334
msgid "Bad kern value."
msgstr ""
-#: src/groff-font.c:362
+#: src/groff-font.c:366
#, c-format
msgid "Font read successfully with internal name %s."
msgstr ""
-#: src/groff-font.c:383
+#: src/groff-font.c:387
msgid "Error reading font."
msgstr ""
-#: src/groff-font.c:394
+#: src/groff-font.c:398
msgid "installation error: Groff font error: "
msgstr ""
-#: src/groff-font.c:419
+#: src/groff-font.c:423
#, c-format
msgid "Bad character \\%3o."
msgstr ""
-#: src/groff-font.c:673
+#: src/groff-font.c:677
#, c-format
msgid "Groff font error: Cannot find \"%s\"."
msgstr ""
-#: src/groff-font.c:738
+#: src/groff-font.c:742
#, c-format
msgid "%s: Opening Groff description file..."
msgstr ""
-#: src/groff-font.c:754
+#: src/groff-font.c:758
msgid "Multiple `sizes' declarations."
msgstr ""
-#: src/groff-font.c:771
+#: src/groff-font.c:775
msgid "Unexpected end of file. Missing 0 terminator to `sizes' command?"
msgstr ""
-#: src/groff-font.c:783 src/groff-font.c:790 src/groff-font.c:803
+#: src/groff-font.c:787 src/groff-font.c:794 src/groff-font.c:807
msgid "Bad argument to `sizes'."
msgstr ""
-#: src/groff-font.c:795
+#: src/groff-font.c:799
msgid "Bad range in argument to `sizes'."
msgstr ""
-#: src/groff-font.c:824
+#: src/groff-font.c:828
msgid "Family name expected."
msgstr ""
-#: src/groff-font.c:829
+#: src/groff-font.c:833
msgid "This command already specified."
msgstr ""
-#: src/groff-font.c:849
+#: src/groff-font.c:853
#, c-format
msgid "%s: Device characteristic already defined."
msgstr ""
-#: src/groff-font.c:855
+#: src/groff-font.c:859
#, c-format
msgid "%s: Invalid numeric format."
msgstr ""
-#: src/groff-font.c:885
+#: src/groff-font.c:889
msgid "Missing `res', `unitwidth', and/or `sizes' line(s)."
msgstr ""
-#: src/groff-font.c:911
+#: src/groff-font.c:915
msgid "Description file read successfully."
msgstr ""
-#: src/groff-font.c:943
+#: src/groff-font.c:947
msgid "Error reading description file."
msgstr ""
-#: src/groff-font.c:1000
+#: src/groff-font.c:1004
msgid "<<fallback>>"
msgstr ""
-#: src/hash.c:577
+#: src/hash.c:581
#, c-format
msgid "hash table:"
msgstr ""
-#: src/html.c:67
+#: src/html.c:72
#, c-format
msgid "HTML driver initializing as `%s'..."
msgstr ""
-#: src/html.c:171
+#: src/html.c:176
#, c-format
msgid "Unknown configuration parameter `%s' for HTML device driver."
msgstr ""
-#: src/html.c:254
+#: src/html.c:257
msgid ""
"Cannot find HTML prologue. The use of `-vv' on the command line is "
"suggested as a debugging aid."
msgstr ""
-#: src/html.c:259
+#: src/html.c:262
#, c-format
msgid "%s: %s: Opening HTML prologue..."
msgstr ""
-#: src/html.c:286 src/html.c:297 src/postscript.c:1358 src/postscript.c:1369
+#: src/html.c:286 src/postscript.c:1353 src/postscript.c:1364
msgid "nobody"
msgstr ""
-#: src/html.c:293 src/html.c:298 src/postscript.c:1365 src/postscript.c:1370
+#: src/html.c:295 src/html.c:298 src/postscript.c:1360 src/postscript.c:1365
msgid "nowhere"
msgstr ""
-#: src/html.c:357
+#: src/html.c:358
#, c-format
msgid "%s: HTML prologue read successfully."
msgstr ""
-#: src/html.c:361
+#: src/html.c:362
#, c-format
msgid "%s: Error reading HTML prologue."
msgstr ""
-#: src/html.c:389
+#: src/html.c:390
#, c-format
msgid "HTML output driver: %s: %s"
msgstr ""
-#: src/html.c:420 src/list.q:252
+#: src/html.c:421 src/list.q:256
#, c-format
msgid "Cannot open first page on HTML device %s."
msgstr ""
-#: src/include.c:40
+#: src/include.c:43
msgid "expecting filename"
msgstr ""
-#: src/inpt-pgm.c:81
+#: src/inpt-pgm.c:84
msgid "No matching INPUT PROGRAM command."
msgstr ""
-#: src/inpt-pgm.c:86
+#: src/inpt-pgm.c:89
msgid ""
"No data-input or transformation commands specified between INPUT PROGRAM and "
"END INPUT PROGRAM."
msgstr ""
-#: src/inpt-pgm.c:284 src/inpt-pgm.c:412
+#: src/inpt-pgm.c:287 src/inpt-pgm.c:415
msgid ""
"This command may only be executed between INPUT PROGRAM and END INPUT "
"PROGRAM."
msgstr ""
-#: src/inpt-pgm.c:334
+#: src/inpt-pgm.c:337
msgid "COLUMN subcommand multiply specified."
msgstr ""
-#: src/inpt-pgm.c:385
+#: src/inpt-pgm.c:388
msgid ""
"REREAD: Column numbers must be positive finite numbers. Column set to 1."
msgstr ""
-#: src/lexer.c:252
+#: src/lexer.c:256
#, c-format
msgid "%s does not form a valid number."
msgstr ""
-#: src/lexer.c:369
+#: src/lexer.c:373
#, c-format
msgid "Bad character in input: `%c'."
msgstr ""
-#: src/lexer.c:371
+#: src/lexer.c:375
#, c-format
msgid "Bad character in input: `\\%o'."
msgstr ""
-#: src/lexer.c:409
+#: src/lexer.c:413
#, c-format
msgid "Syntax error %s at %s."
msgstr ""
-#: src/lexer.c:412
+#: src/lexer.c:416
#, c-format
msgid "Syntax error at %s."
msgstr ""
-#: src/lexer.c:530 src/lexer.c:547
+#: src/lexer.c:534 src/lexer.c:551
#, c-format
msgid "expecting `%s'"
msgstr ""
-#: src/lexer.c:561 src/val-labs.c:154
+#: src/lexer.c:565 src/val-labs.c:157
msgid "expecting string"
msgstr ""
-#: src/lexer.c:575 src/val-labs.c:163
+#: src/lexer.c:579 src/val-labs.c:166
msgid "expecting integer"
msgstr ""
-#: src/lexer.c:589
+#: src/lexer.c:593
msgid "expecting number"
msgstr ""
-#: src/lexer.c:603
+#: src/lexer.c:607
msgid "expecting identifier"
msgstr ""
-#: src/lexer.c:889
+#: src/lexer.c:893
msgid "<ERROR>"
msgstr ""
-#: src/lexer.c:1023 src/repeat.c:214
+#: src/lexer.c:1027 src/repeat.c:217
msgid "Unexpected end of file."
msgstr ""
-#: src/lexer.c:1032
+#: src/lexer.c:1036
msgid "binary"
msgstr ""
-#: src/lexer.c:1032
+#: src/lexer.c:1036
msgid "octal"
msgstr ""
-#: src/lexer.c:1032
+#: src/lexer.c:1036
msgid "hex"
msgstr ""
-#: src/lexer.c:1046
+#: src/lexer.c:1050
#, c-format
msgid "String of %s digits has %d characters, which is not a multiple of %d."
msgstr ""
-#: src/lexer.c:1075
+#: src/lexer.c:1079
#, c-format
msgid "`%c' is not a valid %s digit."
msgstr ""
-#: src/lexer.c:1106
+#: src/lexer.c:1110
msgid "Unterminated string constant."
msgstr ""
-#: src/lexer.c:1178
+#: src/lexer.c:1182
#, c-format
msgid "String exceeds 255 characters in length (%d characters)."
msgstr ""
-#: src/lexer.c:1193
+#: src/lexer.c:1197
msgid ""
"Sorry, literal strings may not contain null characters. Replacing with "
"spaces."
msgstr ""
-#: src/loop.c:194
+#: src/list.q:154
+#, c-format
+msgid ""
+"The first case (%ld) specified precedes the last case (%ld) specified. The "
+"values will be swapped."
+msgstr ""
+
+#: src/list.q:162
+#, c-format
+msgid ""
+"The first case (%ld) to list is less than 1. The value is being reset to 1."
+msgstr ""
+
+#: src/list.q:168
+#, c-format
+msgid ""
+"The last case (%ld) to list is less than 1. The value is being reset to 1."
+msgstr ""
+
+#: src/list.q:174
+#, c-format
+msgid "The step value %ld is less than 1. The value is being reset to 1."
+msgstr ""
+
+#: src/list.q:201
+msgid "`/FORMAT WEIGHT' specified, but weighting is not on."
+msgstr ""
+
+#: src/list.q:442
+msgid "Line"
+msgstr ""
+
+#: src/loop.c:197
msgid "The index variable may not be a string variable."
msgstr ""
-#: src/loop.c:300
+#: src/loop.c:303
msgid "There is no LOOP command that corresponds to this END LOOP."
msgstr ""
-#: src/loop.c:494
+#: src/loop.c:497
msgid ""
"This command may only appear enclosed in a LOOP/END LOOP control structure."
msgstr ""
-#: src/loop.c:500
+#: src/loop.c:503
msgid "BREAK not enclosed in DO IF structure."
msgstr ""
-#: src/loop.c:578
+#: src/loop.c:581
#, c-format
msgid "%s without %s."
msgstr ""
-#: src/main.c:86
+#: src/main.c:89
msgid "Error initializing output drivers."
msgstr ""
-#: src/main.c:156
+#: src/main.c:159
msgid "This command not executed."
msgstr ""
-#: src/main.c:160
+#: src/main.c:163
msgid ""
"Skipping the rest of this command. Part of this command may have been "
"executed."
msgstr ""
-#: src/main.c:165
+#: src/main.c:168
msgid ""
"Skipping the rest of this command. This command was fully executed up to "
"this point."
msgstr ""
-#: src/main.c:170
+#: src/main.c:173
msgid ""
"Trailing garbage was encountered following this command. The command was "
"fully executed to this point."
msgstr ""
-#: src/main.c:187
+#: src/main.c:190
msgid "The rest of this command has been discarded."
msgstr ""
-#: src/matrix-data.c:208
+#: src/matrix-data.c:211
msgid "VARIABLES subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:223
+#: src/matrix-data.c:226
msgid "VARNAME_ cannot be explicitly specified on VARIABLES."
msgstr ""
-#: src/matrix-data.c:284
+#: src/matrix-data.c:287
msgid "in FORMAT subcommand"
msgstr ""
-#: src/matrix-data.c:295
+#: src/matrix-data.c:298
msgid "SPLIT subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:302
+#: src/matrix-data.c:305
msgid "in SPLIT subcommand"
msgstr ""
-#: src/matrix-data.c:312
+#: src/matrix-data.c:315
msgid "Split variable may not be named ROWTYPE_ or VARNAME_."
msgstr ""
-#: src/matrix-data.c:346
+#: src/matrix-data.c:349
#, c-format
msgid "Split variable %s is already another type."
msgstr ""
-#: src/matrix-data.c:361
+#: src/matrix-data.c:364
msgid "FACTORS subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:379
+#: src/matrix-data.c:382
#, c-format
msgid "Factor variable %s is already another type."
msgstr ""
-#: src/matrix-data.c:394
+#: src/matrix-data.c:397
msgid "CELLS subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:400 src/matrix-data.c:419
+#: src/matrix-data.c:403 src/matrix-data.c:422
msgid "expecting positive integer"
msgstr ""
-#: src/matrix-data.c:413
+#: src/matrix-data.c:416
msgid "N subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:434
+#: src/matrix-data.c:437
msgid "CONTENTS subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:454
+#: src/matrix-data.c:457
msgid "Nested parentheses not allowed."
msgstr ""
-#: src/matrix-data.c:464
+#: src/matrix-data.c:467
msgid "Mismatched right parenthesis (`(')."
msgstr ""
-#: src/matrix-data.c:469
+#: src/matrix-data.c:472
msgid "Empty parentheses not allowed."
msgstr ""
-#: src/matrix-data.c:482 src/matrix-data.c:490
+#: src/matrix-data.c:485 src/matrix-data.c:493
msgid "in CONTENTS subcommand"
msgstr ""
-#: src/matrix-data.c:497
+#: src/matrix-data.c:500
#, c-format
msgid "Content multiply specified for %s."
msgstr ""
-#: src/matrix-data.c:514
+#: src/matrix-data.c:517
msgid "Missing right parenthesis."
msgstr ""
-#: src/matrix-data.c:534
+#: src/matrix-data.c:537
msgid "Missing VARIABLES subcommand."
msgstr ""
-#: src/matrix-data.c:540
+#: src/matrix-data.c:543
msgid ""
"CONTENTS subcommand not specified: assuming file contains only CORR matrix."
msgstr ""
-#: src/matrix-data.c:550
+#: src/matrix-data.c:553
msgid ""
"Missing CELLS subcommand. CELLS is required when ROWTYPE_ is not given in "
"the data and factors are present."
msgstr ""
-#: src/matrix-data.c:558
+#: src/matrix-data.c:561
msgid "Split file values must be present in the data when ROWTYPE_ is present."
msgstr ""
-#: src/matrix-data.c:611
+#: src/matrix-data.c:614
msgid "No continuous variables specified."
msgstr ""
-#: src/matrix-data.c:854
+#: src/matrix-data.c:857
msgid "Scope of string exceeds line."
msgstr ""
-#: src/matrix-data.c:919
+#: src/matrix-data.c:922
#, c-format
msgid "End of line expected %s while reading %s."
msgstr ""
-#: src/matrix-data.c:1104
+#: src/matrix-data.c:1107
#, c-format
msgid "expecting value for %s %s"
msgstr ""
-#: src/matrix-data.c:1268
+#: src/matrix-data.c:1271
#, c-format
msgid "Syntax error expecting SPLIT FILE value %s."
msgstr ""
-#: src/matrix-data.c:1277
+#: src/matrix-data.c:1280
#, c-format
msgid "Expecting value %g for %s."
msgstr ""
-#: src/matrix-data.c:1318 src/matrix-data.c:1781
+#: src/matrix-data.c:1321 src/matrix-data.c:1784
#, c-format
msgid "Syntax error expecting factor value %s."
msgstr ""
-#: src/matrix-data.c:1327
+#: src/matrix-data.c:1330
#, c-format
msgid "Syntax error expecting value %g for %s %s."
msgstr ""
-#: src/matrix-data.c:1561
+#: src/matrix-data.c:1564
#, c-format
msgid "Syntax error %s expecting SPLIT FILE value."
msgstr ""
-#: src/matrix-data.c:1688
+#: src/matrix-data.c:1691
#, c-format
msgid ""
"Expected %d lines of data for %s content; actually saw %d lines. No data "
"will be output for this content."
msgstr ""
-#: src/matrix-data.c:1723
+#: src/matrix-data.c:1726
#, c-format
msgid "Multiply specified ROWTYPE_ %s."
msgstr ""
-#: src/matrix-data.c:1728
+#: src/matrix-data.c:1731
#, c-format
msgid "Syntax error %s expecting ROWTYPE_ string."
msgstr ""
-#: src/matrix-data.c:1748
+#: src/matrix-data.c:1751
#, c-format
msgid "Syntax error %s."
msgstr ""
-#: src/matrix-data.c:1898
+#: src/matrix-data.c:1901
#, c-format
msgid "Duplicate specification for %s."
msgstr ""
-#: src/matrix-data.c:1910
+#: src/matrix-data.c:1913
#, c-format
msgid "Too many rows of matrix data for %s."
msgstr ""
-#: src/matrix-data.c:1958
+#: src/matrix-data.c:1961
#, c-format
msgid "Syntax error expecting value for %s %s."
msgstr ""
-#: src/mis-val.c:71
+#: src/means.q:104
+msgid "Missing required subcommand TABLES."
+msgstr ""
+
+#: src/means.q:138
+msgid "TABLES subcommand may not appear more than once."
+msgstr ""
+
+#: src/mis-val.c:74
msgid "`)' expected after value specification."
msgstr ""
-#: src/mis-val.c:101
+#: src/mis-val.c:104
#, c-format
msgid "`(' expected after variable name%s."
msgstr ""
-#: src/mis-val.c:113
+#: src/mis-val.c:116
msgid "Long string value specified."
msgstr ""
-#: src/mis-val.c:118
+#: src/mis-val.c:121
msgid "Short strings must be of equal width."
msgstr ""
-#: src/mis-val.c:175
+#: src/mis-val.c:178
#, c-format
msgid "Range %g THRU %g is not valid because %g is greater than %g."
msgstr ""
-#: src/mis-val.c:206
+#: src/mis-val.c:209
msgid "Number or range expected."
msgstr ""
-#: src/mis-val.c:239
+#: src/mis-val.c:242
msgid "At most one range can exist in the missing values for any one variable."
msgstr ""
-#: src/mis-val.c:245
+#: src/mis-val.c:248
msgid "At most one individual value can be missing along with one range."
msgstr ""
-#: src/mis-val.c:307
+#: src/mis-val.c:310
msgid "String is not of proper length."
msgstr ""
-#: src/mis-val.c:316 src/repeat.c:460
+#: src/mis-val.c:319 src/repeat.c:463
msgid "String expected."
msgstr ""
-#: src/mkfile.c:52
+#: src/mkfile.c:54
#, c-format
msgid "%s: Creating temporary file: %s."
msgstr ""
-#: src/mkfile.c:94
+#: src/mkfile.c:96
#, c-format
msgid "%s: Creating file: %s."
msgstr ""
-#: src/modify-vars.c:89
+#: src/modify-vars.c:92
msgid ""
"MODIFY VARS may not be used after TEMPORARY. Temporary transformations will "
"be made permanent."
msgstr ""
-#: src/modify-vars.c:113
+#: src/modify-vars.c:116
msgid "REORDER subcommand may be given at most once."
msgstr ""
-#: src/modify-vars.c:136
+#: src/modify-vars.c:139
msgid "Cannot specify ALL after specifying a set of variables."
msgstr ""
-#: src/modify-vars.c:146
+#: src/modify-vars.c:149
msgid "`(' expected on REORDER subcommand."
msgstr ""
-#: src/modify-vars.c:158
+#: src/modify-vars.c:161
msgid "`)' expected following variable names on REORDER subcommand."
msgstr ""
-#: src/modify-vars.c:176
+#: src/modify-vars.c:179
msgid "RENAME subcommand may be given at most once."
msgstr ""
-#: src/modify-vars.c:189
+#: src/modify-vars.c:192
msgid "`(' expected on RENAME subcommand."
msgstr ""
-#: src/modify-vars.c:197
+#: src/modify-vars.c:200
msgid ""
"`=' expected between lists of new and old variable names on RENAME "
"subcommand."
msgstr ""
-#: src/modify-vars.c:205 src/rename-vars.c:75
+#: src/modify-vars.c:208 src/rename-vars.c:78
#, c-format
msgid ""
"Differing number of variables in old name list (%d) and in new name list (%"
"d)."
msgstr ""
-#: src/modify-vars.c:216
+#: src/modify-vars.c:219
msgid "`)' expected after variable lists on RENAME subcommand."
msgstr ""
-#: src/modify-vars.c:230
+#: src/modify-vars.c:233
msgid ""
"KEEP subcommand may be given at most once. It may notbe given in "
"conjunction with the DROP subcommand."
msgstr ""
-#: src/modify-vars.c:272
+#: src/modify-vars.c:275
msgid ""
"DROP subcommand may be given at most once. It may not be given in "
"conjunction with the KEEP subcommand."
msgstr ""
-#: src/modify-vars.c:298
+#: src/modify-vars.c:301
#, c-format
msgid "Unrecognized subcommand name `%s'."
msgstr ""
-#: src/modify-vars.c:300
+#: src/modify-vars.c:303
msgid "Subcommand name expected."
msgstr ""
-#: src/modify-vars.c:308
+#: src/modify-vars.c:311
msgid "`/' or `.' expected."
msgstr ""
-#: src/moments.c:513
+#: src/moments.c:516
msgid "expecting weight value"
msgstr ""
-#: src/numeric.c:58
+#: src/numeric.c:61
#, c-format
msgid "Format type %s may not be used with a numeric variable."
msgstr ""
-#: src/numeric.c:77 src/numeric.c:159 src/vector.c:156
+#: src/numeric.c:80 src/numeric.c:162 src/vector.c:159
#, c-format
msgid "There is already a variable named %s."
msgstr ""
-#: src/numeric.c:129
+#: src/numeric.c:132
#, c-format
msgid "Format type %s may not be used with a string variable."
msgstr ""
-#: src/output.c:86
+#: src/oneway.q:174
+msgid "Number of contrast coefficients must equal the number of groups"
+msgstr ""
+
+#: src/oneway.q:183
+#, c-format
+msgid "Coefficients for contrast %d do not total zero"
+msgstr ""
+
+#: src/oneway.q:248
+#, c-format
+msgid "`%s' is not a variable name"
+msgstr ""
+
+#: src/oneway.q:283
+msgid "Sum of Squares"
+msgstr ""
+
+#: src/oneway.q:285
+msgid "Mean Square"
+msgstr ""
+
+#: src/oneway.q:286 src/t-test.q:974
+msgid "F"
+msgstr ""
+
+#: src/oneway.q:287 src/oneway.q:540
+msgid "Significance"
+msgstr ""
+
+#: src/oneway.q:309
+msgid "Between Groups"
+msgstr ""
+
+#: src/oneway.q:310
+msgid "Within Groups"
+msgstr ""
+
+#: src/oneway.q:357
+msgid "ANOVA"
+msgstr ""
+
+#: src/oneway.q:537
+msgid "Levene Statistic"
+msgstr ""
+
+#: src/oneway.q:538
+msgid "df1"
+msgstr ""
+
+#: src/oneway.q:539
+msgid "df2"
+msgstr ""
+
+#: src/oneway.q:543
+msgid "Test of Homogeneity of Variances"
+msgstr ""
+
+#: src/oneway.q:613
+msgid "Contrast Coefficients"
+msgstr ""
+
+#: src/oneway.q:615 src/oneway.q:682
+msgid "Contrast"
+msgstr ""
+
+#: src/oneway.q:680
+msgid "Contrast Tests"
+msgstr ""
+
+#: src/oneway.q:683
+msgid "Value of Contrast"
+msgstr ""
+
+#: src/oneway.q:685 src/t-test.q:976 src/t-test.q:1168 src/t-test.q:1260
+msgid "t"
+msgstr ""
+
+#: src/oneway.q:687 src/t-test.q:978 src/t-test.q:1170 src/t-test.q:1262
+msgid "Sig. (2-tailed)"
+msgstr ""
+
+#: src/oneway.q:731
+msgid "Assume equal variances"
+msgstr ""
+
+#: src/oneway.q:735
+msgid "Does not assume equal"
+msgstr ""
+
+#: src/output.c:89
msgid "Attempt to iterate driver list reentrantly."
msgstr ""
-#: src/output.c:163
+#: src/output.c:166
#, c-format
msgid "Unknown output driver `%s'."
msgstr ""
-#: src/output.c:165
+#: src/output.c:168
#, c-format
msgid "Output driver `%s' referenced but never defined."
msgstr ""
-#: src/output.c:295
-msgid "Cannot find output initialization file. Use `-vv' to view search path."
+#: src/output.c:298
+msgid ""
+"Cannot find output initialization file. Use `-vvvv' to view search path."
msgstr ""
-#: src/output.c:300
+#: src/output.c:303
#, c-format
msgid "%s: Opening device description file..."
msgstr ""
-#: src/output.c:304 src/output.c:1175 src/postscript.c:1102
+#: src/output.c:307 src/output.c:1183 src/postscript.c:1097
#, c-format
msgid "Opening %s: %s."
msgstr ""
-#: src/output.c:315 src/output.c:1186 src/postscript.c:1117
+#: src/output.c:318 src/output.c:1194 src/postscript.c:1112
#, c-format
msgid "Reading %s: %s."
msgstr ""
-#: src/output.c:337 src/output.c:499
+#: src/output.c:340 src/output.c:507
msgid "Syntax error."
msgstr ""
-#: src/output.c:347 src/postscript.c:1128
+#: src/output.c:350 src/postscript.c:1123
#, c-format
msgid "Closing %s: %s."
msgstr ""
-#: src/output.c:352
+#: src/output.c:355
msgid "No output drivers are active."
msgstr ""
-#: src/output.c:355
+#: src/output.c:358
msgid "Device definition file read successfully."
msgstr ""
-#: src/output.c:357
+#: src/output.c:360
msgid "Error reading device definition file."
msgstr ""
-#: src/output.c:471
+#: src/output.c:479
#, c-format
msgid ""
"Driver classes:\n"
"\t"
msgstr ""
-#: src/output.c:600
+#: src/output.c:608
msgid "Syntax error in string constant."
msgstr ""
-#: src/output.c:632
+#: src/output.c:640
msgid "Syntax error in options."
msgstr ""
-#: src/output.c:642
+#: src/output.c:650
msgid "Syntax error in options (`=' expected)."
msgstr ""
-#: src/output.c:649
+#: src/output.c:657
msgid "Syntax error in options (value expected after `=')."
msgstr ""
-#: src/output.c:721
+#: src/output.c:729
msgid "Driver name expected."
msgstr ""
-#: src/output.c:742
+#: src/output.c:750
msgid "Class name expected."
msgstr ""
-#: src/output.c:751
+#: src/output.c:759
#, c-format
msgid "Unknown output driver class `%s'."
msgstr ""
-#: src/output.c:758
+#: src/output.c:766
#, c-format
msgid "Can't initialize output driver class `%s'."
msgstr ""
-#: src/output.c:765
+#: src/output.c:773
#, c-format
msgid "Can't initialize output driver `%s' of class `%s'."
msgstr ""
-#: src/output.c:787
+#: src/output.c:795
#, c-format
msgid "Unknown device type `%s'."
msgstr ""
-#: src/output.c:799
+#: src/output.c:807
#, c-format
msgid "Can't complete initialization of output driver `%s' of class `%s'."
msgstr ""
-#: src/output.c:846
+#: src/output.c:854
#, c-format
msgid "Can't deinitialize output driver class `%s'."
msgstr ""
-#: src/output.c:919
+#: src/output.c:927
#, c-format
msgid "Trying to find keyword `%s'...\n"
msgstr ""
-#: src/output.c:1036
+#: src/output.c:1044
#, c-format
msgid "Unit \"%s\" is unknown in dimension \"%s\"."
msgstr ""
-#: src/output.c:1051
+#: src/output.c:1059
#, c-format
msgid "Bad dimension \"%s\"."
msgstr ""
-#: src/output.c:1077
+#: src/output.c:1085
#, c-format
msgid "`x' expected in paper size `%s'."
msgstr ""
-#: src/output.c:1087
+#: src/output.c:1095
#, c-format
msgid "Trailing garbage `%s' on paper size `%s'."
msgstr ""
-#: src/output.c:1136
+#: src/output.c:1144
msgid "Paper size name must not be empty."
msgstr ""
-#: src/output.c:1167
+#: src/output.c:1175
msgid "Cannot find `papersize' configuration file."
msgstr ""
-#: src/output.c:1171
+#: src/output.c:1179
#, c-format
msgid "%s: Opening paper size definition file..."
msgstr ""
-#: src/output.c:1213
+#: src/output.c:1221
msgid "Syntax error in paper size definition."
msgstr ""
-#: src/output.c:1242
+#: src/output.c:1250
msgid "Paper size definition file read successfully."
msgstr ""
-#: src/output.c:1244
+#: src/output.c:1252
msgid "Error reading paper size definition file."
msgstr ""
-#: src/output.c:1313
+#: src/output.c:1321
#, c-format
msgid "Error closing page on %s device of %s class."
msgstr ""
-#: src/output.c:1317
+#: src/output.c:1325
#, c-format
msgid "Error opening page on %s device of %s class."
msgstr ""
-#: src/percentiles.c:38
+#: src/percentiles.c:42
msgid "HAverage"
msgstr ""
-#: src/percentiles.c:39
+#: src/percentiles.c:43
msgid "Weighted Average"
msgstr ""
-#: src/percentiles.c:40
+#: src/percentiles.c:44
msgid "Rounded"
msgstr ""
-#: src/percentiles.c:41
+#: src/percentiles.c:45
msgid "Empirical"
msgstr ""
-#: src/percentiles.c:42
+#: src/percentiles.c:46
msgid "Empirical with averaging"
msgstr ""
-#: src/permissions.c:76
+#: src/permissions.c:77
#, c-format
msgid "Expecting %s or %s."
msgstr ""
-#: src/permissions.c:109
+#: src/permissions.c:110
#, c-format
msgid "Cannot stat %s: %s"
msgstr ""
-#: src/permissions.c:122
+#: src/permissions.c:123
#, c-format
msgid "Cannot change mode of %s: %s"
msgstr ""
-#: src/pfm-read.c:85
+#: src/pfm-read.c:88
#, c-format
msgid "portable file %s corrupt at offset %ld: "
msgstr ""
-#: src/pfm-read.c:112
+#: src/pfm-read.c:115
msgid "unexpected end of file"
msgstr ""
-#: src/pfm-read.c:170
+#: src/pfm-read.c:173
#, c-format
msgid ""
"An error occurred while opening \"%s\" for reading as a portable file: %s."
msgstr ""
-#: src/pfm-read.c:188
+#: src/pfm-read.c:191
msgid "Data record expected."
msgstr ""
-#: src/pfm-read.c:296
+#: src/pfm-read.c:299
msgid "Missing numeric terminator."
msgstr ""
-#: src/pfm-read.c:319
+#: src/pfm-read.c:322
msgid "Invalid integer."
msgstr ""
-#: src/pfm-read.c:330
+#: src/pfm-read.c:333
#, c-format
msgid "Bad string length %d."
msgstr ""
-#: src/pfm-read.c:401
+#: src/pfm-read.c:404
#, c-format
msgid "%s: Not a portable file."
msgstr ""
-#: src/pfm-read.c:425
+#: src/pfm-read.c:429
#, c-format
msgid "Bad date string length %d."
msgstr ""
-#: src/pfm-read.c:427
+#: src/pfm-read.c:431
#, c-format
msgid "Bad time string length %d."
msgstr ""
-#: src/pfm-read.c:465 src/sfm-read.c:1019
+#: src/pfm-read.c:469 src/sfm-read.c:1022
#, c-format
msgid "%s: Bad format specifier byte (%d)."
msgstr ""
-#: src/pfm-read.c:472 src/sfm-read.c:1035
+#: src/pfm-read.c:476 src/sfm-read.c:1038
#, c-format
msgid "%s variable %s has invalid format specifier %s."
msgstr ""
-#: src/pfm-read.c:487
+#: src/pfm-read.c:491
msgid "Expected variable count record."
msgstr ""
-#: src/pfm-read.c:491
+#: src/pfm-read.c:495
#, c-format
msgid "Invalid number of variables %d."
msgstr ""
-#: src/pfm-read.c:501
+#: src/pfm-read.c:505
#, c-format
msgid "Weight variable name (%s) truncated."
msgstr ""
-#: src/pfm-read.c:513
+#: src/pfm-read.c:517
msgid "Expected variable record."
msgstr ""
-#: src/pfm-read.c:517
+#: src/pfm-read.c:521
#, c-format
msgid "Invalid variable width %d."
msgstr ""
-#: src/pfm-read.c:525
+#: src/pfm-read.c:529
#, c-format
msgid "position %d: Invalid variable name `%s'."
msgstr ""
-#: src/pfm-read.c:533
-#, c-format
-msgid "Duplicate variable name %s."
-msgstr ""
-
-#: src/pfm-read.c:573
+#: src/pfm-read.c:577
#, c-format
msgid "Bad missing values for %s."
msgstr ""
-#: src/pfm-read.c:591
+#: src/pfm-read.c:595
#, c-format
msgid "Weighting variable %s not present in dictionary."
msgstr ""
-#: src/pfm-read.c:638
+#: src/pfm-read.c:642
#, c-format
msgid "Unknown variable %s while parsing value labels."
msgstr ""
-#: src/pfm-read.c:641
+#: src/pfm-read.c:645
#, c-format
msgid ""
"Cannot assign value labels to %s and %s, which have different variable types "
"or widths."
msgstr ""
-#: src/pfm-read.c:665
+#: src/pfm-read.c:669
#, c-format
msgid "Duplicate label for value %g for variable %s."
msgstr ""
-#: src/pfm-read.c:668
+#: src/pfm-read.c:672
#, c-format
msgid "Duplicate label for value `%.*s' for variable %s."
msgstr ""
-#: src/pfm-write.c:93
+#: src/pfm-write.c:99
#, c-format
msgid ""
"An error occurred while opening \"%s\" for writing as a portable file: %s."
msgstr ""
-#: src/pfm-write.c:155
+#: src/pfm-write.c:161
#, c-format
msgid "%s: Writing portable file: %s."
msgstr ""
-#: src/pfm-write.c:493
+#: src/pfm-write.c:410
#, c-format
msgid "%s: Closing portable file: %s."
msgstr ""
-#: src/plot-hist.c:126
+#: src/plot-hist.c:127
msgid "HISTOGRAM"
msgstr ""
-#: src/plot-hist.c:128 src/frequencies.q:1139
-msgid "Frequency"
-msgstr ""
-
-#: src/postscript.c:326
+#: src/postscript.c:321
#, c-format
msgid "PostScript driver initializing as `%s'..."
msgstr ""
-#: src/postscript.c:450
+#: src/postscript.c:445
#, c-format
msgid ""
"PostScript driver: The defined page is not long enough to hold margins and "
"room for %d lines of each font at the default size of %d.%03d points."
msgstr ""
-#: src/postscript.c:580
+#: src/postscript.c:575
#, c-format
msgid "Unknown configuration parameter `%s' for PostScript device driver."
msgstr ""
-#: src/postscript.c:596
+#: src/postscript.c:591
#, c-format
msgid ""
"Unknown orientation `%s'. Valid orientations are `portrait' and `landscape'."
msgstr ""
-#: src/postscript.c:608
+#: src/postscript.c:603
msgid ""
"Unknown value for `data'. Valid values are `clean7bit', `clean8bit', and "
"`binary'."
msgstr ""
-#: src/postscript.c:617
+#: src/postscript.c:612
msgid "Unknown value for `line-ends'. Valid values are `lf' and `crlf'."
msgstr ""
-#: src/postscript.c:626
+#: src/postscript.c:621
msgid "Unknown value for `line-style'. Valid values are `thick' and `double'."
msgstr ""
-#: src/postscript.c:689
+#: src/postscript.c:684
#, c-format
msgid ""
"Default font size must be at least 1 point (value of 1000 for key `%s')."
msgstr ""
-#: src/postscript.c:721
+#: src/postscript.c:716
#, c-format
msgid "Value for `%s' must be a dimension of positive length (i.e., `1in')."
msgstr ""
-#: src/postscript.c:785
+#: src/postscript.c:780
#, c-format
msgid "Nonnegative integer required as value for `%s'."
msgstr ""
-#: src/postscript.c:911
+#: src/postscript.c:906
#, c-format
msgid "%s: %s: Opening PostScript font encoding..."
msgstr ""
-#: src/postscript.c:917
+#: src/postscript.c:912
#, c-format
msgid ""
"PostScript driver: Cannot open encoding file `%s': %s. Substituting "
"ISOLatin1Encoding for missing encoding."
msgstr ""
-#: src/postscript.c:959
+#: src/postscript.c:954
msgid "PostScript driver: Invalid numeric format."
msgstr ""
-#: src/postscript.c:964
+#: src/postscript.c:959
#, c-format
msgid ""
"PostScript driver: Codes must be between 0 and 255. (%d is not allowed.)"
msgstr ""
-#: src/postscript.c:1000
+#: src/postscript.c:995
#, c-format
msgid "PostScript driver: Error closing encoding file `%s'."
msgstr ""
-#: src/postscript.c:1003
+#: src/postscript.c:998
#, c-format
msgid "%s: PostScript font encoding read successfully."
msgstr ""
-#: src/postscript.c:1097
+#: src/postscript.c:1092
#, c-format
msgid "%s: %s: Opening PostScript encoding list file."
msgstr ""
-#: src/postscript.c:1130
+#: src/postscript.c:1125
#, c-format
msgid "%s: PostScript encoding list file read successfully."
msgstr ""
-#: src/postscript.c:1144
+#: src/postscript.c:1139
msgid "<<default encoding>>"
msgstr ""
-#: src/postscript.c:1302
+#: src/postscript.c:1297
msgid ""
"Cannot find PostScript prologue. The use of `-vv' on the command line is "
"suggested as a debugging aid."
msgstr ""
-#: src/postscript.c:1307
+#: src/postscript.c:1302
#, c-format
msgid "%s: %s: Opening PostScript prologue..."
msgstr ""
-#: src/postscript.c:1479
+#: src/postscript.c:1474
#, c-format
msgid "%s: PostScript prologue read successfully."
msgstr ""
-#: src/postscript.c:1483
+#: src/postscript.c:1478
#, c-format
msgid "%s: Error reading PostScript prologue."
msgstr ""
-#: src/postscript.c:1653
+#: src/postscript.c:1648
#, c-format
msgid "PostScript output driver: %s: %s"
msgstr ""
-#: src/postscript.c:2337
+#: src/postscript.c:2347
#, c-format
msgid "PostScript driver: Cannot find encoding `%s' for PostScript font `%s'."
msgstr ""
-#: src/postscript.c:2885
-msgid "Charts are currently unsupported with postscript drivers."
-msgstr ""
-
-#: src/print.c:365 src/print.c:382
+#: src/print.c:368 src/print.c:385
#, c-format
msgid "%g is not a valid column location."
msgstr ""
-#: src/print.c:376
+#: src/print.c:379
#, c-format
msgid "Column location expected following `%d-'."
msgstr ""
-#: src/print.c:387
+#: src/print.c:390
#, c-format
msgid ""
"%d-%ld is not a valid column range. The second column must be greater than "
"or equal to the first."
msgstr ""
-#: src/print.c:488
+#: src/print.c:491
#, c-format
msgid "Variable %s has width %d so it cannot be output as format %s."
msgstr ""
-#: src/print.c:508
+#: src/print.c:511
#, c-format
msgid ""
"%s is not of the same type as %s. To specify variables of different types "
"in the same variable list, use a FORTRAN-like format specifier."
msgstr ""
-#: src/print.c:538
+#: src/print.c:541
msgid ""
"The ending column for a field must not be less than the starting column."
msgstr ""
-#: src/print.c:686
+#: src/print.c:689
msgid ""
"The number of format specifications exceeds the number of variable names "
"given."
msgstr ""
-#: src/print.c:838
+#: src/print.c:841
#, c-format
msgid "Writing %d record(s) to file %s."
msgstr ""
-#: src/print.c:841
+#: src/print.c:844
#, c-format
msgid "Writing %d record(s) to the listing file."
msgstr ""
-#: src/print.c:1088
+#: src/print.c:1091
msgid "The expression on PRINT SPACE evaluated to the system-missing value."
msgstr ""
-#: src/print.c:1091
+#: src/print.c:1094
#, c-format
msgid "The expression on PRINT SPACE evaluated to %g."
msgstr ""
-#: src/recode.c:283
+#: src/rank.q:242
+#, c-format
+msgid "Variable %s already exists."
+msgstr ""
+
+#: src/rank.q:247
+msgid "Too many variables in INTO clause."
+msgstr ""
+
+#: src/recode.c:286
#, c-format
msgid ""
"%d variable(s) cannot be recoded into %d variable(s). Specify the same "
"number of variables as input and output variables."
msgstr ""
-#: src/recode.c:297
+#: src/recode.c:300
#, c-format
msgid ""
"There is no string variable named %s. (All string variables specified on "
"variable.)"
msgstr ""
-#: src/recode.c:306
+#: src/recode.c:309
#, c-format
msgid ""
"Type mismatch between input and output variables. Output variable %s is not "
"a string variable, but all the input variables are string variables."
msgstr ""
-#: src/recode.c:325
+#: src/recode.c:328
#, c-format
msgid "Type mismatch after INTO: %s is not a numeric variable."
msgstr ""
-#: src/recode.c:355
+#: src/recode.c:358
msgid ""
"INTO must be used when the input values are numeric and output values are "
"string."
msgstr ""
-#: src/recode.c:363
+#: src/recode.c:366
msgid ""
"INTO must be used when the input values are string and output values are "
"numeric."
msgstr ""
-#: src/recode.c:486
+#: src/recode.c:489
msgid "expecting output value"
msgstr ""
-#: src/recode.c:500
+#: src/recode.c:503
msgid ""
"Inconsistent output types. The output values must be all numeric or all "
"string."
msgstr ""
-#: src/recode.c:551
+#: src/recode.c:554
msgid "following LO THRU"
msgstr ""
-#: src/recode.c:567 src/recode.c:596
+#: src/recode.c:570 src/recode.c:599
msgid "in source value"
msgstr ""
-#: src/recode.c:609
+#: src/recode.c:612
msgid ""
"Keyword CONVERT may only be used with string input values and numeric output "
"values."
msgstr ""
-#: src/rename-vars.c:48
+#: src/rename-vars.c:51
msgid ""
"RENAME VARS may not be used after TEMPORARY. Temporary transformations will "
"be made permanent."
msgstr ""
-#: src/rename-vars.c:60
+#: src/rename-vars.c:63
msgid "`(' expected."
msgstr ""
-#: src/rename-vars.c:68
+#: src/rename-vars.c:71
msgid "`=' expected between lists of new and old variable names."
msgstr ""
-#: src/rename-vars.c:86
+#: src/rename-vars.c:89
msgid "`)' expected after variable names."
msgstr ""
-#: src/rename-vars.c:96
+#: src/rename-vars.c:99
#, c-format
msgid "Renaming would duplicate variable name %s."
msgstr ""
-#: src/repeat.c:151
+#: src/repeat.c:154
#, c-format
msgid "Identifier %s is given twice."
msgstr ""
-#: src/repeat.c:194
+#: src/repeat.c:197
#, c-format
msgid ""
"There must be the same number of substitutions for each dummy variable "
"s as well, but %d were specified."
msgstr ""
-#: src/repeat.c:299
+#: src/repeat.c:302
msgid "No commands in scope."
msgstr ""
-#: src/repeat.c:487
+#: src/repeat.c:490
msgid "No matching DO REPEAT."
msgstr ""
-#: src/sample.c:73
+#: src/sample.c:76
msgid "The sampling factor must be between 0 and 1 exclusive."
msgstr ""
-#: src/sample.c:93
+#: src/sample.c:96
#, c-format
msgid "Cannot sample %d observations from a population of %d."
msgstr ""
-#: src/sel-if.c:100
+#: src/sel-if.c:103
msgid "The filter variable must be numeric."
msgstr ""
-#: src/sel-if.c:106
+#: src/sel-if.c:109
msgid "The filter variable may not be scratch."
msgstr ""
-#: src/sel-if.c:137
+#: src/sel-if.c:140
msgid "Only last instance of this command is in effect."
msgstr ""
-#: src/sfm-read.c:129
-msgid "corrupt system file: "
-msgstr ""
-
-#: src/sfm-read.c:148 src/sfm-write.c:919
+#: src/set.q:224 src/set.q:303 src/set.q:346 src/set.q:401 src/set.q:403
+#: src/set.q:405 src/set.q:407 src/set.q:409 src/set.q:411 src/set.q:413
+#: src/set.q:415 src/set.q:417 src/set.q:419 src/set.q:421 src/set.q:423
+#: src/set.q:425 src/set.q:831 src/set.q:912 src/set.q:1007
#, c-format
-msgid "%s: Closing system file: %s."
+msgid "%s is obsolete."
msgstr ""
-#: src/sfm-read.c:234
-#, c-format
-msgid ""
-"An error occurred while opening \"%s\" for reading as a system file: %s."
+#: src/set.q:232
+msgid "LISTING is ON"
msgstr ""
-#: src/sfm-read.c:252
-#, c-format
-msgid ""
-"%s: Index of weighting variable (%d) is not between 0 and number of elements "
-"per case (%d)."
+#: src/set.q:234
+msgid "LISTING is OFF"
msgstr ""
-#: src/sfm-read.c:261
+#: src/set.q:248
#, c-format
-msgid ""
-"%s: Weighting variable may not be a continuation of a long string variable."
+msgid "EPOCH is %d"
msgstr ""
-#: src/sfm-read.c:264
-#, c-format
-msgid "%s: Weighting variable may not be a string variable."
+#: src/set.q:267
+msgid "Journalling is off"
msgstr ""
-#: src/sfm-read.c:289
-#, c-format
+#: src/set.q:434
msgid ""
-"%s: Orphaned variable index record (type 4). Type 4 records must always "
-"immediately follow type 3 records."
+"CASE is not implemented and probably won't be. If you care, complain about "
+"it."
msgstr ""
-#: src/sfm-read.c:347
-#, c-format
-msgid "%s: Invalid subrecord length. Record: 7; Subrecord: 11"
+#: src/set.q:439
+msgid "Active file compression is not yet implemented (and probably won't be)."
msgstr ""
-#: src/sfm-read.c:401
+#: src/set.q:453
#, c-format
-msgid "%s: Trailing garbage in long variable name map."
+msgid ""
+"CC%c: Length of custom currency string `%s' (%d) exceeds maximum length of "
+"16."
msgstr ""
-#: src/sfm-read.c:408
+#: src/set.q:475
#, c-format
-msgid "%s: Long variable mapping to invalid variable name `%s'."
+msgid ""
+"CC%c: Custom currency string `%s' does not contain exactly three periods or "
+"commas (not both)."
msgstr ""
-#: src/sfm-read.c:418
-#, c-format
-msgid "%s: Long variable mapping for nonexistent variable %s."
+#: src/set.q:528
+msgid "None"
msgstr ""
-#: src/sfm-read.c:428
-#, c-format
-msgid "%s: Duplicate long variable name `%s' within system file."
+#: src/set.q:534
+msgid "Disabled"
msgstr ""
-#: src/sfm-read.c:456
-#, c-format
-msgid "%s: Unrecognized record type 7, subtype %d encountered in system file."
+#: src/set.q:539
+msgid "Screen"
msgstr ""
-#: src/sfm-read.c:481
-#, c-format
-msgid "%s: Unrecognized record type %d."
+#: src/set.q:546
+msgid "Listing"
msgstr ""
-#: src/sfm-read.c:513
-#, c-format
-msgid ""
-"%s: Bad size (%d) or count (%d) field on record type 7, subtype 3.\tExpected "
-"size %d, count 8."
+#: src/set.q:553
+msgid "Other"
msgstr ""
-#: src/sfm-read.c:524
+#: src/set.q:662
+msgid "EPOCH must be 1500 or later."
+msgstr ""
+
+#: src/set.q:669
+msgid "expecting AUTOMATIC or year"
+msgstr ""
+
+#: src/set.q:690
+msgid "LENGTH must be at least 1."
+msgstr ""
+
+#: src/set.q:729
+msgid "Missing identifier in RESULTS subcommand."
+msgstr ""
+
+#: src/set.q:740
+msgid "Unrecognized identifier in RESULTS subcommand."
+msgstr ""
+
+#: src/set.q:777
+msgid "WIDTH must be at least 1."
+msgstr ""
+
+#: src/set.q:800
+#, c-format
+msgid ""
+"FORMAT requires numeric output format as an argument. Specified format %s "
+"is of type string."
+msgstr ""
+
+#: src/set.q:844
+msgid "Text color must be in range 0-15."
+msgstr "Text colour must be in range 0-15."
+
+#: src/set.q:857
+msgid "Background color must be in range 0-7."
+msgstr "Background colour must be in range 0-7."
+
+#: src/set.q:868
+msgid "Border color must be in range 0-7."
+msgstr "Border colour must be in range 0-7."
+
+#: src/set.q:924
+msgid "Lower window color must be between 0 and 6."
+msgstr "Lower window colour must be between 0 and 6."
+
+#: src/set.q:938
+msgid "Upper window color must be between 0 and 6."
+msgstr "Upper window colour must be between 0 and 6."
+
+#: src/set.q:950
+msgid "Frame color must be between 0 and 6."
+msgstr "Frame colour must be between 0 and 6."
+
+#: src/set.q:1016
+msgid "Drive letter expected in WORKDEV subcommand."
+msgstr ""
+
+#: src/set.q:1048
+msgid "Specify a terminal type with the TERM environment variable."
+msgstr ""
+
+#: src/set.q:1054
+msgid "Could not access the termcap data base."
+msgstr ""
+
+#: src/set.q:1056
+#, c-format
+msgid "Terminal type `%s' is not defined."
+msgstr ""
+
+#: src/set.q:1114
+msgid "data> "
+msgstr ""
+
+#: src/sfm-read.c:132
+msgid "corrupt system file: "
+msgstr ""
+
+#: src/sfm-read.c:151 src/sfm-write.c:922
+#, c-format
+msgid "%s: Closing system file: %s."
+msgstr ""
+
+#: src/sfm-read.c:237
+#, c-format
+msgid ""
+"An error occurred while opening \"%s\" for reading as a system file: %s."
+msgstr ""
+
+#: src/sfm-read.c:255
+#, c-format
+msgid ""
+"%s: Index of weighting variable (%d) is not between 0 and number of elements "
+"per case (%d)."
+msgstr ""
+
+#: src/sfm-read.c:264
+#, c-format
+msgid ""
+"%s: Weighting variable may not be a continuation of a long string variable."
+msgstr ""
+
+#: src/sfm-read.c:267
+#, c-format
+msgid "%s: Weighting variable may not be a string variable."
+msgstr ""
+
+#: src/sfm-read.c:292
+#, c-format
+msgid ""
+"%s: Orphaned variable index record (type 4). Type 4 records must always "
+"immediately follow type 3 records."
+msgstr ""
+
+#: src/sfm-read.c:350
+#, c-format
+msgid "%s: Invalid subrecord length. Record: 7; Subrecord: 11"
+msgstr ""
+
+#: src/sfm-read.c:404
+#, c-format
+msgid "%s: Trailing garbage in long variable name map."
+msgstr ""
+
+#: src/sfm-read.c:411
+#, c-format
+msgid "%s: Long variable mapping to invalid variable name `%s'."
+msgstr ""
+
+#: src/sfm-read.c:421
+#, c-format
+msgid "%s: Long variable mapping for nonexistent variable %s."
+msgstr ""
+
+#: src/sfm-read.c:431
+#, c-format
+msgid "%s: Duplicate long variable name `%s' within system file."
+msgstr ""
+
+#: src/sfm-read.c:459
+#, c-format
+msgid "%s: Unrecognized record type 7, subtype %d encountered in system file."
+msgstr ""
+
+#: src/sfm-read.c:484
+#, c-format
+msgid "%s: Unrecognized record type %d."
+msgstr ""
+
+#: src/sfm-read.c:516
+#, c-format
+msgid ""
+"%s: Bad size (%d) or count (%d) field on record type 7, subtype 3.\tExpected "
+"size %d, count 8."
+msgstr ""
+
+#: src/sfm-read.c:527
#, c-format
msgid ""
"%s: Floating-point representation in system file is not IEEE-754. PSPP "
"cannot convert between floating-point formats."
msgstr ""
-#: src/sfm-read.c:540
+#: src/sfm-read.c:543
#, c-format
msgid ""
"%s: File-indicated endianness (%s) does not match endianness intuited from "
"file header (%s)."
msgstr ""
-#: src/sfm-read.c:543 src/sfm-read.c:544
+#: src/sfm-read.c:546 src/sfm-read.c:547
msgid "big-endian"
msgstr ""
-#: src/sfm-read.c:543 src/sfm-read.c:544
+#: src/sfm-read.c:546 src/sfm-read.c:547
msgid "little-endian"
msgstr ""
-#: src/sfm-read.c:545
+#: src/sfm-read.c:548
msgid "unknown"
msgstr ""
-#: src/sfm-read.c:549
+#: src/sfm-read.c:552
#, c-format
msgid "%s: File-indicated character representation code (%s) is not ASCII."
msgstr ""
-#: src/sfm-read.c:553
+#: src/sfm-read.c:556
msgid "DEC Kanji"
msgstr ""
-#: src/sfm-read.c:553 src/sysfile-info.c:115
+#: src/sfm-read.c:556 src/sysfile-info.c:118
msgid "Unknown"
msgstr ""
-#: src/sfm-read.c:569
+#: src/sfm-read.c:572
#, c-format
msgid ""
"%s: Bad size (%d) or count (%d) field on record type 7, subtype 4.\tExpected "
"size %d, count 8."
msgstr ""
-#: src/sfm-read.c:584
+#: src/sfm-read.c:587
#, c-format
msgid ""
"%s: File-indicated value is different from internal value for at least one "
"%g; LOWEST: %g, %g."
msgstr ""
-#: src/sfm-read.c:611
+#: src/sfm-read.c:614
#, c-format
msgid ""
"%s: Bad magic. Proper system files begin with the four characters `$FL2'. "
"This file will not be read."
msgstr ""
-#: src/sfm-read.c:653
+#: src/sfm-read.c:656
#, c-format
msgid ""
"%s: File layout code has unexpected value %d. Value should be 2, in big-"
"endian or little-endian format."
msgstr ""
-#: src/sfm-read.c:681
+#: src/sfm-read.c:684
#, c-format
msgid "%s: Number of cases in file (%ld) is not between -1 and %d."
msgstr ""
-#: src/sfm-read.c:686
+#: src/sfm-read.c:689
#, c-format
msgid "%s: Compression bias (%g) is not the usual value of 100."
msgstr ""
-#: src/sfm-read.c:809
+#: src/sfm-read.c:812
#, c-format
msgid ""
"%s: position %d: String variable does not have proper number of continuation "
"records."
msgstr ""
-#: src/sfm-read.c:820
+#: src/sfm-read.c:823
#, c-format
msgid "%s: position %d: Superfluous long string continuation record."
msgstr ""
-#: src/sfm-read.c:826
+#: src/sfm-read.c:829
#, c-format
msgid "%s: position %d: Bad variable type code %d."
msgstr ""
-#: src/sfm-read.c:829
+#: src/sfm-read.c:832
#, c-format
msgid "%s: position %d: Variable label indicator field is not 0 or 1."
msgstr ""
-#: src/sfm-read.c:833
+#: src/sfm-read.c:836
#, c-format
msgid ""
"%s: position %d: Missing value indicator field is not -3, -2, 0, 1, 2, or 3."
msgstr ""
-#: src/sfm-read.c:839
+#: src/sfm-read.c:842
#, c-format
msgid "%s: position %d: Variable name begins with invalid character."
msgstr ""
-#: src/sfm-read.c:843
+#: src/sfm-read.c:846
#, c-format
msgid "%s: position %d: Variable name begins with lowercase letter %c."
msgstr ""
-#: src/sfm-read.c:847
+#: src/sfm-read.c:850
#, c-format
msgid ""
"%s: position %d: Variable name begins with octothorpe (`#'). Scratch "
"variables should not appear in system files."
msgstr ""
-#: src/sfm-read.c:862
+#: src/sfm-read.c:865
#, c-format
msgid "%s: position %d: Variable name character %d is lowercase letter %c."
msgstr ""
-#: src/sfm-read.c:871
+#: src/sfm-read.c:874
#, c-format
msgid ""
"%s: position %d: character `\\%03o' (%c) is not valid in a variable name."
msgstr ""
-#: src/sfm-read.c:878
+#: src/sfm-read.c:881
#, c-format
msgid "%s: Invalid variable name `%s' within system file."
msgstr ""
-#: src/sfm-read.c:885
+#: src/sfm-read.c:888
#, c-format
msgid "%s: Duplicate variable name `%s' within system file."
msgstr ""
-#: src/sfm-read.c:908
+#: src/sfm-read.c:911
#, c-format
msgid "%s: Variable %s indicates variable label of invalid length %d."
msgstr ""
-#: src/sfm-read.c:928
+#: src/sfm-read.c:931
#, c-format
msgid "%s: Long string variable %s may not have missing values."
msgstr ""
-#: src/sfm-read.c:953
+#: src/sfm-read.c:956
#, c-format
msgid ""
"%s: String variable %s may not have missing values specified as a range."
msgstr ""
-#: src/sfm-read.c:995
+#: src/sfm-read.c:998
#, c-format
msgid "%s: Long string continuation records omitted at end of dictionary."
msgstr ""
-#: src/sfm-read.c:1000
+#: src/sfm-read.c:1003
#, c-format
msgid ""
"%s: System file header indicates %d variable positions but %d were read from "
"file."
msgstr ""
-#: src/sfm-read.c:1025
+#: src/sfm-read.c:1028
#, c-format
msgid "%s: %s variable %s has %s format specifier %s."
msgstr ""
-#: src/sfm-read.c:1078
+#: src/sfm-read.c:1081
#, c-format
msgid "%s: Invalid number of labels: %d. Ignoring labels."
msgstr ""
-#: src/sfm-read.c:1120
+#: src/sfm-read.c:1123
#, c-format
msgid ""
"%s: Variable index record (type 4) does not immediately follow value label "
"record (type 3) as it should."
msgstr ""
-#: src/sfm-read.c:1131
+#: src/sfm-read.c:1134
#, c-format
msgid ""
"%s: Number of variables associated with a value label (%d) is not between 1 "
"and the number of variables (%d)."
msgstr ""
-#: src/sfm-read.c:1147
+#: src/sfm-read.c:1150
#, c-format
msgid ""
"%s: Variable index associated with value label (%d) is not between 1 and the "
"number of values (%d)."
msgstr ""
-#: src/sfm-read.c:1154
+#: src/sfm-read.c:1157
#, c-format
msgid ""
"%s: Variable index associated with value label (%d) refers to a continuation "
"of a string variable, not to an actual variable."
msgstr ""
-#: src/sfm-read.c:1159
+#: src/sfm-read.c:1162
#, c-format
msgid "%s: Value labels are not allowed on long string variables (%s)."
msgstr ""
-#: src/sfm-read.c:1170
+#: src/sfm-read.c:1173
#, c-format
msgid ""
"%s: Variables associated with value label are not all of identical type. "
"Variable %s has %s type, but variable %s has %s type."
msgstr ""
-#: src/sfm-read.c:1211
+#: src/sfm-read.c:1214
#, c-format
msgid "%s: File contains duplicate label for value %g for variable %s."
msgstr ""
-#: src/sfm-read.c:1215
+#: src/sfm-read.c:1218
#, c-format
msgid "%s: File contains duplicate label for value `%.*s' for variable %s."
msgstr ""
-#: src/sfm-read.c:1257 src/sfm-read.c:1534
+#: src/sfm-read.c:1260 src/sfm-read.c:1537
#, c-format
msgid "%s: Reading system file: %s."
msgstr ""
-#: src/sfm-read.c:1260 src/sfm-read.c:1375 src/sfm-read.c:1417
+#: src/sfm-read.c:1263 src/sfm-read.c:1378 src/sfm-read.c:1420
#, c-format
msgid "%s: Unexpected end of file."
msgstr ""
-#: src/sfm-read.c:1275
+#: src/sfm-read.c:1278
#, c-format
msgid "%s: Seeking system file: %s."
msgstr ""
-#: src/sfm-read.c:1290
+#: src/sfm-read.c:1293
#, c-format
msgid "%s: System file contains multiple type 6 (document) records."
msgstr ""
-#: src/sfm-read.c:1296
+#: src/sfm-read.c:1299
#, c-format
msgid "%s: Number of document lines (%ld) must be greater than 0."
msgstr ""
-#: src/sfm-read.c:1328
+#: src/sfm-read.c:1331
#, c-format
msgid "%s: Error reading file: %s."
msgstr ""
-#: src/sfm-read.c:1365
+#: src/sfm-read.c:1368
#, c-format
msgid "%s: Compressed data is corrupted. Data ends in partial case."
msgstr ""
-#: src/sfm-read.c:1537
+#: src/sfm-read.c:1540
#, c-format
msgid "%s: Partial record at end of system file."
msgstr ""
-#: src/sfm-write.c:154
+#: src/sfm-write.c:157
#, c-format
msgid "Error opening \"%s\" for writing as a system file: %s."
msgstr ""
-#: src/sfm-write.c:739
+#: src/sfm-write.c:742
#, c-format
msgid "%s: Writing system file: %s."
msgstr ""
-#: src/sort.c:82
+#: src/sort-prs.c:94
+msgid "`A' or `D' expected inside parentheses."
+msgstr ""
+
+#: src/sort-prs.c:99
+msgid "`)' expected."
+msgstr ""
+
+#: src/sort.c:85
msgid "Buffer limit must be at least 2."
msgstr ""
-#: src/sort.c:458
+#: src/sort.c:461
#, c-format
msgid ""
"Out of memory. Could not allocate room for minimum of %d cases of %d bytes "
"each. (PSPP workspace is currently restricted to a maximum of %d KB.)"
msgstr ""
-#: src/sysfile-info.c:96
+#: src/sysfile-info.c:99
msgid "File:"
msgstr ""
-#: src/sysfile-info.c:98
+#: src/sysfile-info.c:101
msgid "Label:"
msgstr ""
-#: src/sysfile-info.c:102
+#: src/sysfile-info.c:105
msgid "No label."
msgstr ""
-#: src/sysfile-info.c:105
+#: src/sysfile-info.c:108
msgid "Created:"
msgstr ""
-#: src/sysfile-info.c:108
+#: src/sysfile-info.c:111
msgid "Endian:"
msgstr ""
-#: src/sysfile-info.c:109
+#: src/sysfile-info.c:112
msgid "Big."
msgstr ""
-#: src/sysfile-info.c:109
+#: src/sysfile-info.c:112
msgid "Little."
msgstr ""
-#: src/sysfile-info.c:110
+#: src/sysfile-info.c:113
msgid "Variables:"
msgstr ""
-#: src/sysfile-info.c:113
+#: src/sysfile-info.c:116
msgid "Cases:"
msgstr ""
-#: src/sysfile-info.c:116
+#: src/sysfile-info.c:119
msgid "Type:"
msgstr ""
-#: src/sysfile-info.c:117
+#: src/sysfile-info.c:120
msgid "System File."
msgstr ""
-#: src/sysfile-info.c:118
+#: src/sysfile-info.c:121
msgid "Weight:"
msgstr ""
-#: src/sysfile-info.c:122
+#: src/sysfile-info.c:125
msgid "Not weighted."
msgstr ""
-#: src/sysfile-info.c:124
+#: src/sysfile-info.c:127
msgid "Mode:"
msgstr ""
-#: src/sysfile-info.c:126
+#: src/sysfile-info.c:129
#, c-format
msgid "Compression %s."
msgstr ""
-#: src/sysfile-info.c:126
+#: src/sysfile-info.c:129
msgid "on"
msgstr ""
-#: src/sysfile-info.c:126
+#: src/sysfile-info.c:129
msgid "off"
msgstr ""
-#: src/sysfile-info.c:136 src/sysfile-info.c:374
+#: src/sysfile-info.c:139 src/sysfile-info.c:377
msgid "Description"
msgstr ""
-#: src/sysfile-info.c:137 src/sysfile-info.c:372
+#: src/sysfile-info.c:140 src/sysfile-info.c:375
msgid "Position"
msgstr ""
-#: src/sysfile-info.c:195
+#: src/sysfile-info.c:198
msgid "The active file does not have a file label."
msgstr ""
-#: src/sysfile-info.c:198
+#: src/sysfile-info.c:201
msgid "File label:"
msgstr ""
-#: src/sysfile-info.c:260
+#: src/sysfile-info.c:263
msgid "No variables to display."
msgstr ""
-#: src/sysfile-info.c:279
+#: src/sysfile-info.c:282
msgid "Macros not supported."
msgstr ""
-#: src/sysfile-info.c:289
+#: src/sysfile-info.c:292
msgid "The active file dictionary does not contain any documents."
msgstr ""
-#: src/sysfile-info.c:298
+#: src/sysfile-info.c:301
msgid "Documents in the active file:"
msgstr ""
-#: src/sysfile-info.c:376 src/sysfile-info.c:534 src/vfm.c:811
+#: src/sysfile-info.c:379 src/sysfile-info.c:537 src/vfm.c:812
msgid "Label"
msgstr ""
-#: src/sysfile-info.c:448
+#: src/sysfile-info.c:451
#, c-format
msgid "Format: %s"
msgstr ""
-#: src/sysfile-info.c:455
+#: src/sysfile-info.c:458
#, c-format
msgid "Print Format: %s"
msgstr ""
-#: src/sysfile-info.c:458
+#: src/sysfile-info.c:461
#, c-format
msgid "Write Format: %s"
msgstr ""
-#: src/sysfile-info.c:466
+#: src/sysfile-info.c:469
msgid "Missing Values: "
msgstr ""
-#: src/sysfile-info.c:533 src/vfm.c:810 src/crosstabs.q:1099
-#: src/crosstabs.q:1126 src/crosstabs.q:1146 src/crosstabs.q:1168
-#: src/examine.q:1130 src/frequencies.q:1138 src/frequencies.q:1259
-msgid "Value"
-msgstr ""
-
-#: src/sysfile-info.c:590
+#: src/sysfile-info.c:593
msgid "No vectors defined."
msgstr ""
-#: src/sysfile-info.c:605
+#: src/sysfile-info.c:608
msgid "Vector"
msgstr ""
-#: src/tab.c:254
+#: src/t-test.q:269
+msgid "TESTVAL, GROUPS and PAIRS subcommands are mutually exclusive."
+msgstr ""
+
+#: src/t-test.q:287
+msgid "VARIABLES subcommand is not appropriate with PAIRS"
+msgstr ""
+
+#: src/t-test.q:325
+msgid "One or more VARIABLES must be specified."
+msgstr ""
+
+#: src/t-test.q:376
+#, c-format
+msgid "Long string variable %s is not valid here."
+msgstr ""
+
+#: src/t-test.q:396 src/t-test.q:411
+msgid ""
+"When applying GROUPS to a string variable, two values must be specified."
+msgstr ""
+
+#: src/t-test.q:483
+#, c-format
+msgid ""
+"PAIRED was specified but the number of variables preceding WITH (%d) did not "
+"match the number following (%d)."
+msgstr ""
+
+#: src/t-test.q:500
+msgid "At least two variables must be specified on PAIRS."
+msgstr ""
+
+#: src/t-test.q:677
+msgid "One-Sample Statistics"
+msgstr ""
+
+#: src/t-test.q:682 src/t-test.q:705 src/t-test.q:829
+msgid "SE. Mean"
+msgstr ""
+
+#: src/t-test.q:699
+msgid "Group Statistics"
+msgstr ""
+
+#: src/t-test.q:823
+msgid "Paired Sample Statistics"
+msgstr ""
+
+#: src/t-test.q:845 src/t-test.q:1189 src/t-test.q:1379
+#, c-format
+msgid "Pair %d"
+msgstr ""
+
+#: src/t-test.q:962
+msgid "Independent Samples Test"
+msgstr ""
+
+#: src/t-test.q:970
+msgid "Levene's Test for Equality of Variances"
+msgstr ""
+
+#: src/t-test.q:972
+msgid "t-test for Equality of Means"
+msgstr ""
+
+#: src/t-test.q:975 src/t-test.q:1364
+msgid "Sig."
+msgstr ""
+
+#: src/t-test.q:979 src/t-test.q:1263
+msgid "Mean Difference"
+msgstr ""
+
+#: src/t-test.q:980
+msgid "Std. Error Difference"
+msgstr ""
+
+#: src/t-test.q:985 src/t-test.q:1160 src/t-test.q:1255
+#, c-format
+msgid "%g%% Confidence Interval of the Difference"
+msgstr ""
+
+#: src/t-test.q:1040
+msgid "Equal variances assumed"
+msgstr ""
+
+#: src/t-test.q:1092
+msgid "Equal variances not assumed"
+msgstr ""
+
+#: src/t-test.q:1150
+msgid "Paired Samples Test"
+msgstr ""
+
+#: src/t-test.q:1153
+msgid "Paired Differences"
+msgstr ""
+
+#: src/t-test.q:1165
+msgid "Std. Error Mean"
+msgstr ""
+
+#: src/t-test.q:1244
+msgid "One-Sample Test"
+msgstr ""
+
+#: src/t-test.q:1249
+#, c-format
+msgid "Test Value = %f"
+msgstr ""
+
+#: src/t-test.q:1359
+msgid "Paired Samples Correlations"
+msgstr ""
+
+#: src/t-test.q:1363
+msgid "Correlation"
+msgstr ""
+
+#: src/t-test.q:1382
+#, c-format
+msgid "%s & %s"
+msgstr ""
+
+#: src/tab.c:257
#, c-format
msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
msgstr ""
-#: src/tab.c:329
+#: src/tab.c:332
#, c-format
msgid ""
"bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
msgstr ""
-#: src/temporary.c:46
+#: src/temporary.c:49
msgid "This command is not valid inside DO IF or LOOP."
msgstr ""
-#: src/temporary.c:53
+#: src/temporary.c:56
msgid ""
"This command may only appear once between procedures and procedure-like "
"commands."
msgstr ""
-#: src/title.c:56
+#: src/title.c:59
#, c-format
msgid "%s before: %s\n"
msgstr ""
-#: src/title.c:56
+#: src/title.c:59
msgid "<none>"
msgstr ""
-#: src/title.c:68
+#: src/title.c:71
#, c-format
msgid "%s: `.' expected after string."
msgstr ""
-#: src/title.c:84
+#: src/title.c:87
#, c-format
msgid "%s after: %s\n"
msgstr ""
-#: src/title.c:140
+#: src/title.c:143
#, c-format
msgid "Document entered %s %02d:%02d:%02d by %s (%s):"
msgstr ""
-#: src/val-labs.c:118
+#: src/val-labs.c:121
#, c-format
msgid ""
"It is not possible to assign value labels to long string variables such as %"
"s."
msgstr ""
-#: src/val-labs.c:167
+#: src/val-labs.c:170
#, c-format
msgid "Value label `%g' is not integer."
msgstr ""
-#: src/val-labs.c:177
+#: src/val-labs.c:180
msgid "Truncating value label to 60 characters."
msgstr ""
-#: src/var-labs.c:47
+#: src/var-labs.c:50
msgid "String expected for variable label."
msgstr ""
-#: src/var-labs.c:53
+#: src/var-labs.c:56
msgid "Truncating variable label to 255 characters."
msgstr ""
-#: src/vars-atr.c:259
+#: src/vars-atr.c:262
msgid "Variable name cannot be empty string."
msgstr ""
-#: src/vars-atr.c:265
+#: src/vars-atr.c:268
#, c-format
msgid "Variable name %s exceeds %d-character limit."
msgstr ""
-#: src/vars-atr.c:274
+#: src/vars-atr.c:277
#, c-format
msgid "Character `%c' (in %s) may not appear in a variable name."
msgstr ""
-#: src/vars-atr.c:283
+#: src/vars-atr.c:286
#, c-format
msgid ""
"Character `%c' (in %s), may not appear as the first character in a variable "
"name."
msgstr ""
-#: src/vars-atr.c:291
+#: src/vars-atr.c:295
#, c-format
msgid "%s may not be used as a variable name because it is a reserved word."
msgstr ""
-#: src/vars-atr.c:386
+#: src/vars-atr.c:390
msgid "Variable suffix too large."
msgstr ""
-#: src/vars-prs.c:43
+#: src/vars-prs.c:46
msgid "expecting variable name"
msgstr ""
-#: src/vars-prs.c:49
+#: src/vars-prs.c:52
#, c-format
msgid "%s is not a variable name."
msgstr ""
-#: src/vars-prs.c:111
+#: src/vars-prs.c:114
msgid "ordinary"
msgstr ""
-#: src/vars-prs.c:113
+#: src/vars-prs.c:116
msgid "system"
msgstr ""
-#: src/vars-prs.c:115
+#: src/vars-prs.c:118
msgid "scratch"
msgstr ""
-#: src/vars-prs.c:174
+#: src/vars-prs.c:177
#, c-format
msgid ""
"%s is not a numeric variable. It will not be included in the variable list."
msgstr ""
-#: src/vars-prs.c:177
+#: src/vars-prs.c:180
#, c-format
msgid ""
"%s is not a string variable. It will not be included in the variable list."
msgstr ""
-#: src/vars-prs.c:181
+#: src/vars-prs.c:184
#, c-format
msgid "Scratch variables (such as %s) are not allowed here."
msgstr ""
-#: src/vars-prs.c:184
+#: src/vars-prs.c:187
#, c-format
msgid ""
"%s and %s are not the same type. All variables in this variable list must "
"be of the same type. %s will be omitted from list."
msgstr ""
-#: src/vars-prs.c:189
+#: src/vars-prs.c:192
#, c-format
msgid "Variable %s appears twice in variable list."
msgstr ""
-#: src/vars-prs.c:299
+#: src/vars-prs.c:302
#, c-format
msgid "%s TO %s is not valid syntax since %s precedes %s in the dictionary."
msgstr ""
-#: src/vars-prs.c:308
+#: src/vars-prs.c:311
#, c-format
msgid ""
"When using the TO keyword to specify several variables, both variables must "
"system variables. %s is a %s variable, whereas %s is %s."
msgstr ""
-#: src/vars-prs.c:379
+#: src/vars-prs.c:382
msgid "incorrect use of TO convention"
msgstr ""
-#: src/vars-prs.c:422
+#: src/vars-prs.c:425
msgid "Scratch variables not allowed here."
msgstr ""
-#: src/vars-prs.c:444
+#: src/vars-prs.c:447
msgid "Prefixes don't match in use of TO convention."
msgstr ""
-#: src/vars-prs.c:449
+#: src/vars-prs.c:452
msgid "Bad bounds in use of TO convention."
msgstr ""
-#: src/vector.c:67
+#: src/vector.c:70
#, c-format
msgid "Vector name %s is given twice."
msgstr ""
-#: src/vector.c:73
+#: src/vector.c:76
#, c-format
msgid "There is already a vector with name %s."
msgstr ""
-#: src/vector.c:94
+#: src/vector.c:97
msgid ""
"A slash must be used to separate each vector specification when using the "
"long form. Commands such as VECTOR A,B=Q1 TO Q20 are not supported."
msgstr ""
-#: src/vector.c:128
+#: src/vector.c:131
msgid "Vectors must have at least one element."
msgstr ""
-#: src/vector.c:142
+#: src/vector.c:145
#, c-format
msgid "%s%d is too long for a variable name."
msgstr ""
-#: src/vector.c:181
+#: src/vector.c:184
msgid ""
"The syntax for this command does not match the expected syntax for either "
"the long form or the short form of VECTOR."
msgstr ""
-#: src/weight.c:53
+#: src/weight.c:56
msgid "The weighting variable must be numeric."
msgstr ""
-#: src/weight.c:58
+#: src/weight.c:61
msgid "The weighting variable may not be scratch."
msgstr ""
-#: src/crosstabs.q:261
-msgid ""
-"Missing mode REPORT not allowed in general mode. Assuming MISSING=TABLE."
-msgstr ""
-
-#: src/crosstabs.q:271
-msgid "Write mode ALL not allowed in general mode. Assuming WRITE=CELLS."
-msgstr ""
-
-#: src/crosstabs.q:332
-msgid "expecting BY"
-msgstr ""
-
-#: src/crosstabs.q:399
-msgid "VARIABLES must be specified before TABLES."
-msgstr ""
-
-#: src/crosstabs.q:436
-#, c-format
-msgid "Maximum value (%ld) less than minimum value (%ld)."
-msgstr ""
-
-#: src/crosstabs.q:800
-msgid "Summary."
-msgstr ""
-
-#: src/crosstabs.q:802 src/examine.q:915
-msgid "Cases"
-msgstr ""
-
-#: src/crosstabs.q:803 src/examine.q:849 src/frequencies.q:1136
-#: src/frequencies.q:1509
-msgid "Valid"
-msgstr ""
-
-#: src/crosstabs.q:804 src/examine.q:850 src/frequencies.q:1204
-#: src/frequencies.q:1510
-msgid "Missing"
-msgstr ""
-
-#: src/crosstabs.q:805 src/crosstabs.q:1008 src/crosstabs.q:1722
-#: src/examine.q:851 src/frequencies.q:1213 src/oneway.q:307 src/oneway.q:470
-msgid "Total"
-msgstr ""
-
-#: src/crosstabs.q:815 src/examine.q:927 src/frequencies.q:1508
-#: src/oneway.q:393 src/t-test.q:675 src/t-test.q:698 src/t-test.q:823
-#: src/t-test.q:1358
-msgid "N"
-msgstr ""
-
-#: src/crosstabs.q:816 src/examine.q:930 src/frequencies.q:1140
-#: src/frequencies.q:1141 src/frequencies.q:1142
-msgid "Percent"
-msgstr ""
-
-#: src/crosstabs.q:1058
-msgid "count"
-msgstr ""
-
-#: src/crosstabs.q:1059
-msgid "row %"
-msgstr ""
-
-#: src/crosstabs.q:1060
-msgid "column %"
-msgstr ""
-
-#: src/crosstabs.q:1061
-msgid "total %"
-msgstr ""
-
-#: src/crosstabs.q:1062
-msgid "expected"
-msgstr ""
-
-#: src/crosstabs.q:1063
-msgid "residual"
-msgstr ""
-
-#: src/crosstabs.q:1064
-msgid "std. resid."
-msgstr ""
-
-#: src/crosstabs.q:1065
-msgid "adj. resid."
-msgstr ""
-
-#: src/crosstabs.q:1098 src/crosstabs.q:1125 src/crosstabs.q:1145
-#: src/crosstabs.q:1166 src/examine.q:1361
-msgid "Statistic"
-msgstr ""
-
-#: src/crosstabs.q:1100 src/oneway.q:280 src/oneway.q:682 src/t-test.q:973
-#: src/t-test.q:1165 src/t-test.q:1257
-msgid "df"
-msgstr ""
-
-#: src/crosstabs.q:1102
-msgid "Asymp. Sig. (2-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1104
-msgid "Exact. Sig. (2-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1106
-msgid "Exact. Sig. (1-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1124 src/crosstabs.q:1165
-msgid "Category"
-msgstr ""
-
-#: src/crosstabs.q:1127 src/crosstabs.q:1169
-msgid "Asymp. Std. Error"
-msgstr ""
-
-#: src/crosstabs.q:1128 src/crosstabs.q:1170
-msgid "Approx. T"
-msgstr ""
-
-#: src/crosstabs.q:1129 src/crosstabs.q:1171
-msgid "Approx. Sig."
-msgstr ""
-
-#: src/crosstabs.q:1144
-#, c-format
-msgid " 95%% Confidence Interval"
-msgstr ""
-
-#: src/crosstabs.q:1147 src/t-test.q:977 src/t-test.q:1162 src/t-test.q:1260
-msgid "Lower"
-msgstr ""
-
-#: src/crosstabs.q:1148 src/t-test.q:978 src/t-test.q:1163 src/t-test.q:1261
-msgid "Upper"
-msgstr ""
-
-#: src/crosstabs.q:1167
-msgid "Type"
-msgstr ""
-
-#: src/crosstabs.q:1916
-msgid "Pearson Chi-Square"
-msgstr ""
-
-#: src/crosstabs.q:1917
-msgid "Likelihood Ratio"
-msgstr ""
-
-#: src/crosstabs.q:1918
-msgid "Fisher's Exact Test"
-msgstr ""
-
-#: src/crosstabs.q:1919
-msgid "Continuity Correction"
-msgstr ""
-
-#: src/crosstabs.q:1920
-msgid "Linear-by-Linear Association"
-msgstr ""
-
-#: src/crosstabs.q:1957 src/crosstabs.q:2027 src/crosstabs.q:2086
-msgid "N of Valid Cases"
-msgstr ""
-
-#: src/crosstabs.q:1973 src/crosstabs.q:2102
-msgid "Nominal by Nominal"
-msgstr ""
-
-#: src/crosstabs.q:1974 src/crosstabs.q:2103
-msgid "Ordinal by Ordinal"
-msgstr ""
-
-#: src/crosstabs.q:1975
-msgid "Interval by Interval"
-msgstr ""
-
-#: src/crosstabs.q:1976
-msgid "Measure of Agreement"
-msgstr ""
-
-#: src/crosstabs.q:1981
-msgid "Phi"
-msgstr ""
-
-#: src/crosstabs.q:1982
-msgid "Cramer's V"
-msgstr ""
-
-#: src/crosstabs.q:1983
-msgid "Contingency Coefficient"
-msgstr ""
-
-#: src/crosstabs.q:1984
-msgid "Kendall's tau-b"
-msgstr ""
-
-#: src/crosstabs.q:1985
-msgid "Kendall's tau-c"
-msgstr ""
-
-#: src/crosstabs.q:1986
-msgid "Gamma"
-msgstr ""
-
-#: src/crosstabs.q:1987
-msgid "Spearman Correlation"
-msgstr ""
-
-#: src/crosstabs.q:1988
-msgid "Pearson's R"
-msgstr ""
-
-#: src/crosstabs.q:1989
-msgid "Kappa"
-msgstr ""
-
-#: src/crosstabs.q:2059
-#, c-format
-msgid "Odds Ratio for %s (%g / %g)"
-msgstr ""
-
-#: src/crosstabs.q:2062
-#, c-format
-msgid "Odds Ratio for %s (%.*s / %.*s)"
-msgstr ""
-
-#: src/crosstabs.q:2070
-#, c-format
-msgid "For cohort %s = %g"
-msgstr ""
-
-#: src/crosstabs.q:2073
-#, c-format
-msgid "For cohort %s = %.*s"
-msgstr ""
-
-#: src/crosstabs.q:2104
-msgid "Nominal by Interval"
-msgstr ""
-
-#: src/crosstabs.q:2109
-msgid "Lambda"
-msgstr ""
-
-#: src/crosstabs.q:2110
-msgid "Goodman and Kruskal tau"
-msgstr ""
-
-#: src/crosstabs.q:2111
-msgid "Uncertainty Coefficient"
-msgstr ""
-
-#: src/crosstabs.q:2112
-msgid "Somers' d"
-msgstr ""
-
-#: src/crosstabs.q:2113
-msgid "Eta"
-msgstr ""
-
-#: src/crosstabs.q:2118
-msgid "Symmetric"
-msgstr ""
-
-#: src/crosstabs.q:2119 src/crosstabs.q:2120
-#, c-format
-msgid "%s Dependent"
-msgstr ""
-
-#: src/examine.q:467 src/examine.q:479
-#, c-format
-msgid "%s and %s are mutually exclusive"
-msgstr ""
-
-#: src/examine.q:909
-msgid "Case Processing Summary"
-msgstr ""
-
-#: src/examine.q:1115
-msgid "Extreme Values"
-msgstr ""
-
-#: src/examine.q:1131
-msgid "Case Number"
-msgstr ""
-
-#: src/examine.q:1216
-msgid "Highest"
-msgstr ""
-
-#: src/examine.q:1221
-msgid "Lowest"
-msgstr ""
-
-#: src/examine.q:1362 src/oneway.q:396 src/oneway.q:680
-msgid "Std. Error"
-msgstr ""
-
-#: src/examine.q:1364 src/oneway.q:410
-msgid "Descriptives"
-msgstr ""
-
-#: src/examine.q:1484 src/oneway.q:401
-#, c-format
-msgid "%g%% Confidence Interval for Mean"
-msgstr ""
-
-#: src/examine.q:1490 src/oneway.q:403
-msgid "Lower Bound"
-msgstr ""
-
-#: src/examine.q:1501 src/oneway.q:404
-msgid "Upper Bound"
-msgstr ""
-
-#: src/examine.q:1513
-#, c-format
-msgid "5%% Trimmed Mean"
-msgstr ""
-
-#: src/examine.q:1524 src/frequencies.q:114
-msgid "Median"
-msgstr ""
-
-#: src/examine.q:1558 src/oneway.q:395 src/t-test.q:677 src/t-test.q:700
-#: src/t-test.q:824 src/t-test.q:1160
-msgid "Std. Deviation"
-msgstr ""
-
-#: src/examine.q:1606
-msgid "Interquartile Range"
-msgstr ""
-
-#: src/examine.q:1758
-#, c-format
-msgid "Boxplot of %s vs. %s"
-msgstr ""
-
-#: src/examine.q:1783
-msgid "Boxplot"
-msgstr ""
-
-#: src/examine.q:1825
-#, c-format
-msgid "Normal Q-Q Plot of %s"
-msgstr ""
-
-#: src/examine.q:1826 src/examine.q:1832
-msgid "Observed Value"
-msgstr ""
-
-#: src/examine.q:1827
-msgid "Expected Normal"
-msgstr ""
-
-#: src/examine.q:1830
-#, c-format
-msgid "Detrended Normal Q-Q Plot of %s"
-msgstr ""
-
-#: src/examine.q:1833
-msgid "Dev from Normal"
-msgstr ""
-
-#: src/examine.q:1952 src/examine.q:1974 src/frequencies.q:1520
-msgid "Percentiles"
-msgstr ""
-
-#: src/examine.q:2099
-msgid "Tukey's Hinges"
-msgstr ""
-
-#: src/file-handle.q:124
-#, c-format
-msgid ""
-"File handle %s already refers to file %s. File handles cannot be redefined "
-"within a session."
-msgstr ""
-
-#: src/file-handle.q:145
-msgid "The FILE HANDLE required subcommand NAME is not present."
-msgstr ""
-
-#: src/file-handle.q:164
-msgid ""
-"Fixed-length records were specified on /RECFORM, but record length was not "
-"specified on /LRECL. Assuming 1024-character records."
-msgstr ""
-
-#: src/file-handle.q:171
-#, c-format
-msgid ""
-"Record length (%ld) must be at least one byte. 1-character records will be "
-"assumed."
-msgstr ""
-
-#: src/file-handle.q:271
-#, c-format
-msgid "Can't open %s as a %s because it is already open as a %s"
-msgstr ""
-
-#: src/file-handle.q:278
-#, c-format
-msgid "Can't open %s as a %s for %s because it is already open for %s"
-msgstr ""
-
-#: src/file-handle.q:286
-#, c-format
-msgid "Can't re-open %s as a %s for %s"
-msgstr ""
-
-#: src/file-handle.q:339
-msgid "expecting a file name or handle name"
-msgstr ""
-
-#: src/frequencies.q:113
-msgid "S.E. Mean"
-msgstr ""
-
-#: src/frequencies.q:115
-msgid "Mode"
-msgstr ""
-
-#: src/frequencies.q:119
-msgid "S.E. Kurt"
-msgstr ""
-
-#: src/frequencies.q:121
-msgid "S.E. Skew"
-msgstr ""
-
-#: src/frequencies.q:396
-msgid ""
-"At most one of BARCHART, HISTOGRAM, or HBAR should be given. HBAR will be "
-"assumed. Argument values will be given precedence increasing along the "
-"order given."
-msgstr ""
-
-#: src/frequencies.q:479
-#, c-format
-msgid ""
-"MAX must be greater than or equal to MIN, if both are specified. However, "
-"MIN was specified as %g and MAX as %g. MIN and MAX will be ignored."
-msgstr ""
-
-#: src/frequencies.q:802
-msgid ""
-"Upper limit of integer mode value range must be greater than lower limit."
-msgstr ""
-
-#: src/frequencies.q:815
-#, c-format
-msgid "Variable %s specified multiple times on VARIABLES subcommand."
-msgstr ""
-
-#: src/frequencies.q:821
-#, c-format
-msgid "Integer mode specified, but %s is not a numeric variable."
-msgstr ""
-
-#: src/frequencies.q:887
-msgid "`)' expected after GROUPED interval list."
-msgstr ""
-
-#: src/frequencies.q:899
-#, c-format
-msgid "Variables %s specified on GROUPED but not on VARIABLES."
-msgstr ""
-
-#: src/frequencies.q:906
-#, c-format
-msgid "Variables %s specified multiple times on GROUPED subcommand."
-msgstr ""
-
-#: src/frequencies.q:1137 src/frequencies.q:1229 src/frequencies.q:1230
-#: src/frequencies.q:1262
-msgid "Cum"
-msgstr ""
-
-#: src/frequencies.q:1159
-msgid "Value Label"
-msgstr ""
-
-#: src/frequencies.q:1260
-msgid "Freq"
-msgstr ""
-
-#: src/frequencies.q:1261 src/frequencies.q:1263
-msgid "Pct"
-msgstr ""
-
-#: src/frequencies.q:1482
-#, c-format
-msgid "No valid data for variable %s; statistics not displayed."
-msgstr ""
-
-#: src/list.q:150
-#, c-format
-msgid ""
-"The first case (%ld) specified precedes the last case (%ld) specified. The "
-"values will be swapped."
-msgstr ""
-
-#: src/list.q:158
-#, c-format
-msgid ""
-"The first case (%ld) to list is less than 1. The value is being reset to 1."
-msgstr ""
-
-#: src/list.q:164
-#, c-format
-msgid ""
-"The last case (%ld) to list is less than 1. The value is being reset to 1."
-msgstr ""
-
-#: src/list.q:170
-#, c-format
-msgid "The step value %ld is less than 1. The value is being reset to 1."
-msgstr ""
-
-#: src/list.q:197
-msgid "`/FORMAT WEIGHT' specified, but weighting is not on."
-msgstr ""
-
-#: src/list.q:438
-msgid "Line"
-msgstr ""
-
-#: src/means.q:100
-msgid "Missing required subcommand TABLES."
-msgstr ""
-
-#: src/means.q:134
-msgid "TABLES subcommand may not appear more than once."
-msgstr ""
-
-#: src/oneway.q:170
-msgid "Number of contrast coefficients must equal the number of groups"
-msgstr ""
-
-#: src/oneway.q:179
-#, c-format
-msgid "Coefficients for contrast %d do not total zero"
-msgstr ""
-
-#: src/oneway.q:244
-#, c-format
-msgid "`%s' is not a variable name"
-msgstr ""
-
-#: src/oneway.q:279
-msgid "Sum of Squares"
-msgstr ""
-
-#: src/oneway.q:281
-msgid "Mean Square"
-msgstr ""
-
-#: src/oneway.q:282 src/t-test.q:970
-msgid "F"
-msgstr ""
-
-#: src/oneway.q:283 src/oneway.q:536
-msgid "Significance"
-msgstr ""
-
-#: src/oneway.q:305
-msgid "Between Groups"
-msgstr ""
-
-#: src/oneway.q:306
-msgid "Within Groups"
-msgstr ""
-
-#: src/oneway.q:353
-msgid "ANOVA"
-msgstr ""
-
-#: src/oneway.q:533
-msgid "Levene Statistic"
-msgstr ""
-
-#: src/oneway.q:534
-msgid "df1"
-msgstr ""
-
-#: src/oneway.q:535
-msgid "df2"
-msgstr ""
-
-#: src/oneway.q:539
-msgid "Test of Homogeneity of Variances"
-msgstr ""
-
-#: src/oneway.q:609
-msgid "Contrast Coefficients"
-msgstr ""
-
-#: src/oneway.q:611 src/oneway.q:678
-msgid "Contrast"
-msgstr ""
-
-#: src/oneway.q:676
-msgid "Contrast Tests"
-msgstr ""
-
-#: src/oneway.q:679
-msgid "Value of Contrast"
-msgstr ""
-
-#: src/oneway.q:681 src/t-test.q:972 src/t-test.q:1164 src/t-test.q:1256
-msgid "t"
-msgstr ""
-
-#: src/oneway.q:683 src/t-test.q:974 src/t-test.q:1166 src/t-test.q:1258
-msgid "Sig. (2-tailed)"
-msgstr ""
-
-#: src/oneway.q:727
-msgid "Assume equal variances"
-msgstr ""
-
-#: src/oneway.q:731
-msgid "Does not assume equal"
-msgstr ""
-
-#: src/set.q:221 src/set.q:300 src/set.q:343 src/set.q:398 src/set.q:400
-#: src/set.q:402 src/set.q:404 src/set.q:406 src/set.q:408 src/set.q:410
-#: src/set.q:412 src/set.q:414 src/set.q:416 src/set.q:418 src/set.q:420
-#: src/set.q:422 src/set.q:828 src/set.q:909 src/set.q:1004
-#, c-format
-msgid "%s is obsolete."
-msgstr ""
-
-#: src/set.q:229
-msgid "LISTING is ON"
-msgstr ""
-
-#: src/set.q:231
-msgid "LISTING is OFF"
-msgstr ""
-
-#: src/set.q:245
-#, c-format
-msgid "EPOCH is %d"
-msgstr ""
-
-#: src/set.q:264
-msgid "Journalling is off"
-msgstr ""
-
-#: src/set.q:431
-msgid ""
-"CASE is not implemented and probably won't be. If you care, complain about "
-"it."
-msgstr ""
-
-#: src/set.q:436
-msgid "Active file compression is not yet implemented (and probably won't be)."
-msgstr ""
-
-#: src/set.q:450
-#, c-format
-msgid ""
-"CC%c: Length of custom currency string `%s' (%d) exceeds maximum length of "
-"16."
-msgstr ""
-
-#: src/set.q:472
-#, c-format
-msgid ""
-"CC%c: Custom currency string `%s' does not contain exactly three periods or "
-"commas (not both)."
-msgstr ""
-
-#: src/set.q:525
-msgid "None"
-msgstr ""
-
-#: src/set.q:531
-msgid "Disabled"
-msgstr ""
-
-#: src/set.q:536
-msgid "Screen"
-msgstr ""
-
-#: src/set.q:543
-msgid "Listing"
-msgstr ""
-
-#: src/set.q:550
-msgid "Other"
-msgstr ""
-
-#: src/set.q:659
-msgid "EPOCH must be 1500 or later."
-msgstr ""
-
-#: src/set.q:666
-msgid "expecting AUTOMATIC or year"
-msgstr ""
-
-#: src/set.q:687
-msgid "LENGTH must be at least 1."
-msgstr ""
-
-#: src/set.q:726
-msgid "Missing identifier in RESULTS subcommand."
-msgstr ""
-
-#: src/set.q:737
-msgid "Unrecognized identifier in RESULTS subcommand."
-msgstr ""
-
-#: src/set.q:774
-msgid "WIDTH must be at least 1."
-msgstr ""
-
-#: src/set.q:797
-#, c-format
-msgid ""
-"FORMAT requires numeric output format as an argument. Specified format %s "
-"is of type string."
-msgstr ""
-
-#: src/set.q:841
-msgid "Text color must be in range 0-15."
-msgstr "Text colour must be in range 0-15."
-
-#: src/set.q:854
-msgid "Background color must be in range 0-7."
-msgstr "Background colour must be in range 0-7."
-
-#: src/set.q:865
-msgid "Border color must be in range 0-7."
-msgstr "Border colour must be in range 0-7."
-
-#: src/set.q:921
-msgid "Lower window color must be between 0 and 6."
-msgstr "Lower window colour must be between 0 and 6."
-
-#: src/set.q:935
-msgid "Upper window color must be between 0 and 6."
-msgstr "Upper window colour must be between 0 and 6."
-
-#: src/set.q:947
-msgid "Frame color must be between 0 and 6."
-msgstr "Frame colour must be between 0 and 6."
-
-#: src/set.q:1013
-msgid "Drive letter expected in WORKDEV subcommand."
-msgstr ""
-
-#: src/set.q:1045
-msgid "Specify a terminal type with the TERM environment variable."
-msgstr ""
-
-#: src/set.q:1051
-msgid "Could not access the termcap data base."
-msgstr ""
-
-#: src/set.q:1053
-#, c-format
-msgid "Terminal type `%s' is not defined."
-msgstr ""
-
-#: src/set.q:1111
-msgid "data> "
-msgstr ""
-
-#: src/t-test.q:265
-msgid "TESTVAL, GROUPS and PAIRS subcommands are mutually exclusive."
-msgstr ""
-
-#: src/t-test.q:283
-msgid "VARIABLES subcommand is not appropriate with PAIRS"
-msgstr ""
-
-#: src/t-test.q:321
-msgid "One or more VARIABLES must be specified."
-msgstr ""
-
-#: src/t-test.q:372
-#, c-format
-msgid "Long string variable %s is not valid here."
-msgstr ""
-
-#: src/t-test.q:392 src/t-test.q:407
-msgid ""
-"When applying GROUPS to a string variable, two values must be specified."
-msgstr ""
-
-#: src/t-test.q:479
-#, c-format
-msgid ""
-"PAIRED was specified but the number of variables preceding WITH (%d) did not "
-"match the number following (%d)."
-msgstr ""
-
-#: src/t-test.q:496
-msgid "At least two variables must be specified on PAIRS."
-msgstr ""
-
-#: src/t-test.q:673
-msgid "One-Sample Statistics"
-msgstr ""
-
-#: src/t-test.q:678 src/t-test.q:701 src/t-test.q:825
-msgid "SE. Mean"
-msgstr ""
-
-#: src/t-test.q:695
-msgid "Group Statistics"
-msgstr ""
-
-#: src/t-test.q:819
-msgid "Paired Sample Statistics"
-msgstr ""
-
-#: src/t-test.q:841 src/t-test.q:1185 src/t-test.q:1375
-#, c-format
-msgid "Pair %d"
-msgstr ""
-
-#: src/t-test.q:958
-msgid "Independent Samples Test"
-msgstr ""
-
-#: src/t-test.q:966
-msgid "Levene's Test for Equality of Variances"
-msgstr ""
-
-#: src/t-test.q:968
-msgid "t-test for Equality of Means"
-msgstr ""
-
-#: src/t-test.q:971 src/t-test.q:1360
-msgid "Sig."
-msgstr ""
-
-#: src/t-test.q:975 src/t-test.q:1259
-msgid "Mean Difference"
-msgstr ""
-
-#: src/t-test.q:976
-msgid "Std. Error Difference"
-msgstr ""
-
-#: src/t-test.q:981 src/t-test.q:1156 src/t-test.q:1251
-#, c-format
-msgid "%g%% Confidence Interval of the Difference"
-msgstr ""
-
-#: src/t-test.q:1036
-msgid "Equal variances assumed"
-msgstr ""
-
-#: src/t-test.q:1088
-msgid "Equal variances not assumed"
-msgstr ""
-
-#: src/t-test.q:1146
-msgid "Paired Samples Test"
-msgstr ""
-
-#: src/t-test.q:1149
-msgid "Paired Differences"
-msgstr ""
-
-#: src/t-test.q:1161
-msgid "Std. Error Mean"
-msgstr ""
-
-#: src/t-test.q:1240
-msgid "One-Sample Test"
-msgstr ""
-
-#: src/t-test.q:1245
-#, c-format
-msgid "Test Value = %f"
-msgstr ""
-
-#: src/t-test.q:1355
-msgid "Paired Samples Correlations"
-msgstr ""
-
-#: src/t-test.q:1359
-msgid "Correlation"
-msgstr ""
-
-#: src/t-test.q:1378
-#, c-format
-msgid "%s & %s"
-msgstr ""
-
#, fuzzy
#~ msgid "Week argument to WKYR must be in range 0 to 53."
#~ msgstr "Text colour must be in range 0-15."
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: pspp-dev@gnu.org\n"
-"POT-Creation-Date: 2005-05-27 12:24+0800\n"
+"POT-Creation-Date: 2005-07-30 23:26-0700\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
-#: src/aggregate.c:196
+#: src/aggregate.c:199
msgid "while expecting COLUMNWISE"
msgstr ""
-#: src/aggregate.c:225
+#: src/aggregate.c:228
msgid "expecting BREAK"
msgstr ""
-#: src/aggregate.c:230
+#: src/aggregate.c:233
msgid ""
"When PRESORTED is specified, specifying sorting directions with (A) or (D) "
"has no effect. Output data will be sorted the same way as the input data."
msgstr ""
-#: src/aggregate.c:386
+#: src/aggregate.c:389
msgid "expecting aggregation function"
msgstr ""
-#: src/aggregate.c:402
+#: src/aggregate.c:405
#, c-format
msgid "Unknown aggregation function %s."
msgstr ""
-#: src/aggregate.c:417
+#: src/aggregate.c:420
msgid "expecting `('"
msgstr ""
-#: src/aggregate.c:454
+#: src/aggregate.c:457
#, c-format
msgid "Missing argument %d to %s."
msgstr ""
-#: src/aggregate.c:463
+#: src/aggregate.c:466
#, c-format
msgid "Arguments to %s must be of same type as source variables."
msgstr ""
-#: src/aggregate.c:473
+#: src/aggregate.c:476 src/expressions/parse.c:830
msgid "expecting `)'"
msgstr ""
-#: src/aggregate.c:485
+#: src/aggregate.c:488
#, c-format
msgid ""
"Number of source variables (%d) does not match number of target variables (%"
"d)."
msgstr ""
-#: src/aggregate.c:501
+#: src/aggregate.c:504
#, c-format
msgid ""
"The value arguments passed to the %s function are out-of-order. They will "
"be treated as if they had been specified in the correct order."
msgstr ""
-#: src/aggregate.c:568
+#: src/aggregate.c:571
#, c-format
msgid ""
"Variable name %s is not unique within the aggregate file dictionary, which "
"contains the aggregate variables and the break variables."
msgstr ""
-#: src/apply-dict.c:68
+#: src/apply-dict.c:71
#, c-format
msgid "Variable %s is %s in target file, but %s in source file."
msgstr ""
-#: src/apply-dict.c:71 src/apply-dict.c:72 src/format.c:236
-#: src/sfm-read.c:1029 src/sfm-read.c:1174 src/sfm-read.c:1175
+#: src/apply-dict.c:74 src/apply-dict.c:75 src/format.c:239
+#: src/sfm-read.c:1032 src/sfm-read.c:1177 src/sfm-read.c:1178
msgid "string"
msgstr ""
-#: src/apply-dict.c:71 src/apply-dict.c:72 src/format.c:236
-#: src/sfm-read.c:1029 src/sfm-read.c:1174 src/sfm-read.c:1175
+#: src/apply-dict.c:74 src/apply-dict.c:75 src/format.c:239
+#: src/sfm-read.c:1032 src/sfm-read.c:1177 src/sfm-read.c:1178
msgid "numeric"
msgstr ""
-#: src/apply-dict.c:84
+#: src/apply-dict.c:87
#, c-format
msgid "Cannot add value labels from source file to long string variable %s."
msgstr ""
-#: src/apply-dict.c:130
+#: src/apply-dict.c:133
#, c-format
msgid ""
"Cannot apply missing values from source file to long string variable %s."
msgstr ""
-#: src/apply-dict.c:163
+#: src/apply-dict.c:166
msgid "No matching variables found between the source and target files."
msgstr ""
-#: src/ascii.c:230
+#: src/ascii.c:233
#, c-format
msgid "ASCII driver initializing as `%s'..."
msgstr ""
-#: src/ascii.c:285
+#: src/ascii.c:288
#, c-format
msgid ""
"ascii driver: Area of page excluding margins and headers must be at least 59 "
"by %d lines."
msgstr ""
-#: src/ascii.c:390 src/devind.c:167 src/html.c:103 src/postscript.c:461
+#: src/ascii.c:393 src/devind.c:170 src/html.c:108 src/postscript.c:456
#, c-format
msgid "%s: Initialization complete."
msgstr ""
-#: src/ascii.c:402 src/devind.c:179 src/html.c:115 src/postscript.c:474
+#: src/ascii.c:405 src/devind.c:182 src/html.c:120 src/postscript.c:469
#, c-format
msgid "%s: Beginning closing..."
msgstr ""
-#: src/ascii.c:424 src/devind.c:184 src/html.c:120 src/postscript.c:493
+#: src/ascii.c:427 src/devind.c:187 src/html.c:125 src/postscript.c:488
#, c-format
msgid "%s: Finished closing."
msgstr ""
-#: src/ascii.c:485
+#: src/ascii.c:488
#, c-format
msgid ""
"Bad index value for `box' key: syntax is box[INDEX], 0 <= INDEX < %d "
"decimal, with INDEX expressed in base 4."
msgstr ""
-#: src/ascii.c:491
+#: src/ascii.c:494
#, c-format
msgid "Duplicate value for key `%s'."
msgstr ""
-#: src/ascii.c:500
+#: src/ascii.c:503
#, c-format
msgid "Unknown configuration parameter `%s' for ascii device driver."
msgstr ""
-#: src/ascii.c:513
+#: src/ascii.c:516
#, c-format
msgid ""
"Unknown character set `%s'. Valid character sets are `ascii' and `latin1'."
msgstr ""
-#: src/ascii.c:522
+#: src/ascii.c:525
#, c-format
msgid ""
"Unknown overstrike style `%s'. Valid overstrike styles are `single' and "
"`line'."
msgstr ""
-#: src/ascii.c:531
+#: src/ascii.c:534
#, c-format
msgid ""
"Unknown carriage return style `%s'. Valid carriage return styles are `cr' "
"and `bs'."
msgstr ""
-#: src/ascii.c:543 src/postscript.c:684
+#: src/ascii.c:546 src/postscript.c:679
#, c-format
msgid "Positive integer required as value for `%s'."
msgstr ""
-#: src/ascii.c:574
+#: src/ascii.c:577
#, c-format
msgid "Zero or positive integer required as value for `%s'."
msgstr ""
-#: src/ascii.c:645 src/postscript.c:642
+#: src/ascii.c:648 src/postscript.c:637
#, c-format
msgid "Boolean value expected for %s."
msgstr ""
-#: src/ascii.c:677 src/ascii.c:692 src/ascii.c:709
+#: src/ascii.c:680 src/ascii.c:695 src/ascii.c:712
#, c-format
msgid "ASCII output driver: %s: %s"
msgstr ""
-#: src/ascii.c:785
+#: src/ascii.c:788
#, c-format
msgid "ascii_line_horz: bad hline (%d,%d),%d out of (%d,%d)\n"
msgstr ""
-#: src/ascii.c:819
+#: src/ascii.c:822
#, c-format
msgid "ascii_line_vert: bad vline %d,(%d,%d) out of (%d,%d)\n"
msgstr ""
-#: src/ascii.c:849
+#: src/ascii.c:852
#, c-format
msgid "ascii_line_intersection: bad intsct (%d,%d) out of (%d,%d)\n"
msgstr ""
-#: src/ascii.c:997
+#: src/ascii.c:1000
#, c-format
msgid "%s: horiz=%d, vert=%d\n"
msgstr ""
-#: src/ascii.c:1169
+#: src/ascii.c:1172
#, c-format
msgid "Writing `%s': %s"
msgstr ""
-#: src/ascii.c:1579 src/postscript.c:2098
+#: src/ascii.c:1582 src/postscript.c:2108
#, c-format
msgid "%s - Page %d"
msgstr ""
-#: src/ascii.c:1646
+#: src/ascii.c:1642
msgid "Charts are unsupported with ascii drivers."
msgstr ""
-#: src/autorecode.c:122
+#: src/autorecode.c:125
#, c-format
msgid "Source variable count (%d) does not match target variable count (%d)."
msgstr ""
-#: src/autorecode.c:139 src/command.c:793 src/compute.c:277 src/do-if.c:253
-#: src/get.c:240 src/lexer.c:424 src/loop.c:241 src/matrix-data.c:528
-#: src/print.c:335 src/print.c:1045 src/recode.c:405 src/sel-if.c:54
-#: src/sel-if.c:131 src/vector.c:194 src/file-handle.q:139
+#: src/autorecode.c:142 src/command.c:797 src/compute.c:280 src/do-if.c:256
+#: src/file-handle.q:142 src/get.c:243 src/lexer.c:428 src/loop.c:244
+#: src/matrix-data.c:531 src/print.c:338 src/print.c:1048 src/recode.c:408
+#: src/sel-if.c:57 src/sel-if.c:134 src/vector.c:197
msgid "expecting end of command"
msgstr ""
-#: src/autorecode.c:149
+#: src/autorecode.c:152
#, c-format
msgid "Target variable %s duplicates existing variable %s."
msgstr ""
-#: src/autorecode.c:156
+#: src/autorecode.c:159
#, c-format
msgid "Duplicate variable name %s among target variables."
msgstr ""
-#: src/calendar.c:78
+#: src/calendar.c:81
#, c-format
msgid "Month %d is not in acceptable range of 0 to 13."
msgstr ""
-#: src/calendar.c:86
+#: src/calendar.c:89
#, c-format
msgid "Day %d is not in acceptable range of 0 to 31."
msgstr ""
-#: src/calendar.c:93
+#: src/calendar.c:96
#, c-format
msgid "Date %04d-%d-%d is before the earliest acceptable date of 1582-10-15."
msgstr ""
-#: src/casefile.c:186
+#: src/casefile.c:252
#, c-format
msgid "%s: Removing temporary file: %s."
msgstr ""
-#: src/casefile.c:333
+#: src/casefile.c:399
#, c-format
msgid "Error writing temporary file: %s."
msgstr ""
-#: src/casefile.c:475
+#: src/casefile.c:541
#, c-format
msgid "%s: Opening temporary file: %s."
msgstr ""
-#: src/casefile.c:501
+#: src/casefile.c:567
#, c-format
msgid "%s: Seeking temporary file: %s."
msgstr ""
-#: src/casefile.c:517
+#: src/casefile.c:583
#, c-format
msgid "%s: Reading temporary file: %s."
msgstr ""
-#: src/casefile.c:520
+#: src/casefile.c:586
#, c-format
msgid "%s: Temporary file ended unexpectedly."
msgstr ""
-#: src/cmdline.c:141 src/cmdline.c:160 src/cmdline.c:172 src/command.c:209
-#: src/set.q:425 src/set.q:427 src/set.q:994
+#: src/cmdline.c:145 src/cmdline.c:164 src/cmdline.c:176 src/command.c:213
+#: src/expressions/parse.c:1206 src/set.q:428 src/set.q:430 src/set.q:997
#, c-format
msgid "%s is not yet implemented."
msgstr ""
-#: src/cmdline.c:243
+#: src/cmdline.c:247
#, c-format
msgid ""
"PSPP, a program for statistical analysis of sample data.\n"
"\n"
msgstr ""
-#: src/cmdline.c:281
+#: src/cmdline.c:285
#, c-format
msgid ""
"\n"
"Report bugs to <%s>.\n"
msgstr ""
-#: src/command.c:146
+#: src/command.c:150
#, c-format
msgid "%s not allowed inside FILE TYPE/END FILE TYPE."
msgstr ""
-#: src/command.c:149
+#: src/command.c:153
#, c-format
msgid "%s not allowed inside FILE TYPE GROUPED/END FILE TYPE."
msgstr ""
-#: src/command.c:152
+#: src/command.c:156
msgid "RECORD TYPE must be the first command inside a FILE TYPE structure."
msgstr ""
-#: src/command.c:199
+#: src/command.c:203
msgid "expecting command name"
msgstr ""
-#: src/command.c:228
+#: src/command.c:232
#, c-format
msgid ""
"%s is not allowed (1) before a command to specify the input program, such as "
"PROGRAM and END INPUT PROGRAM."
msgstr ""
-#: src/command.c:232
+#: src/command.c:236
#, c-format
msgid "%s is not allowed within an input program."
msgstr ""
-#: src/command.c:233 src/command.c:234
+#: src/command.c:237 src/command.c:238
#, c-format
msgid "%s is only allowed within an input program."
msgstr ""
-#: src/command.c:513
+#: src/command.c:517
#, c-format
msgid "Unknown command %s."
msgstr ""
-#: src/command.c:619
+#: src/command.c:623
msgid ""
"This command is not accepted in a syntax file. Instead, use FINISH to "
"terminate a syntax file."
msgstr ""
-#: src/command.c:637
+#: src/command.c:641
msgid ""
"This command is not executed in interactive mode. Instead, PSPP drops down "
"to the command prompt. Use EXIT if you really want to quit."
msgstr ""
-#: src/command.c:680 src/command.c:811 src/permissions.c:101
+#: src/command.c:684 src/command.c:815 src/permissions.c:102
msgid "This command not allowed when the SAFER option is set."
msgstr ""
-#: src/command.c:692
+#: src/command.c:696
#, c-format
msgid "Error removing `%s': %s."
msgstr ""
-#: src/command.c:742
+#: src/command.c:746
#, c-format
msgid "Couldn't fork: %s."
msgstr ""
-#: src/command.c:784
+#: src/command.c:788
#, c-format
msgid "Error executing command: %s."
msgstr ""
-#: src/command.c:832
+#: src/command.c:836
msgid "No operating system support for this command."
msgstr ""
-#: src/command.c:855
+#: src/command.c:859
msgid "This command is not valid in a syntax file."
msgstr ""
-#: src/compute.c:141 src/compute.c:190
+#: src/compute.c:144 src/compute.c:193
#, c-format
msgid ""
"When executing COMPUTE: SYSMIS is not a valid value as an index into vector %"
"s."
msgstr ""
-#: src/compute.c:144 src/compute.c:197
+#: src/compute.c:147 src/compute.c:200
#, c-format
msgid ""
"When executing COMPUTE: %g is not a valid value as an index into vector %s."
msgstr ""
-#: src/compute.c:339
+#: src/compute.c:342
#, c-format
msgid "There is no vector named %s."
msgstr ""
-#: src/count.c:156
+#: src/count.c:159
msgid "Destination cannot be a string variable."
msgstr ""
-#: src/count.c:263
+#: src/count.c:266
#, c-format
msgid ""
"%g THRU %g is not a valid range. The number following THRU must be at least "
"as big as the number preceding THRU."
msgstr ""
-#: src/data-in.c:59
-msgid "data-file error: "
+#: src/crosstabs.q:265
+msgid ""
+"Missing mode REPORT not allowed in general mode. Assuming MISSING=TABLE."
+msgstr ""
+
+#: src/crosstabs.q:275
+msgid "Write mode ALL not allowed in general mode. Assuming WRITE=CELLS."
+msgstr ""
+
+#: src/crosstabs.q:336
+msgid "expecting BY"
+msgstr ""
+
+#: src/crosstabs.q:403
+msgid "VARIABLES must be specified before TABLES."
+msgstr ""
+
+#: src/crosstabs.q:440
+#, c-format
+msgid "Maximum value (%ld) less than minimum value (%ld)."
+msgstr ""
+
+#: src/crosstabs.q:804
+msgid "Summary."
+msgstr ""
+
+#: src/crosstabs.q:806 src/examine.q:919
+msgid "Cases"
+msgstr ""
+
+#: src/crosstabs.q:807 src/examine.q:853 src/frequencies.q:1141
+#: src/frequencies.q:1514
+msgid "Valid"
+msgstr ""
+
+#: src/crosstabs.q:808 src/examine.q:854 src/frequencies.q:1209
+#: src/frequencies.q:1515
+msgid "Missing"
+msgstr ""
+
+#: src/crosstabs.q:809 src/crosstabs.q:1012 src/crosstabs.q:1726
+#: src/examine.q:855 src/frequencies.q:1218 src/oneway.q:311 src/oneway.q:474
+msgid "Total"
+msgstr ""
+
+#: src/crosstabs.q:819 src/examine.q:931 src/frequencies.q:1513
+#: src/oneway.q:397 src/t-test.q:679 src/t-test.q:702 src/t-test.q:827
+#: src/t-test.q:1362
+msgid "N"
+msgstr ""
+
+#: src/crosstabs.q:820 src/examine.q:934 src/frequencies.q:1145
+#: src/frequencies.q:1146 src/frequencies.q:1147
+msgid "Percent"
+msgstr ""
+
+#: src/crosstabs.q:1062
+msgid "count"
+msgstr ""
+
+#: src/crosstabs.q:1063
+msgid "row %"
+msgstr ""
+
+#: src/crosstabs.q:1064
+msgid "column %"
+msgstr ""
+
+#: src/crosstabs.q:1065
+msgid "total %"
+msgstr ""
+
+#: src/crosstabs.q:1066
+msgid "expected"
+msgstr ""
+
+#: src/crosstabs.q:1067
+msgid "residual"
+msgstr ""
+
+#: src/crosstabs.q:1068
+msgid "std. resid."
+msgstr ""
+
+#: src/crosstabs.q:1069
+msgid "adj. resid."
+msgstr ""
+
+#: src/crosstabs.q:1102 src/crosstabs.q:1129 src/crosstabs.q:1149
+#: src/crosstabs.q:1170 src/examine.q:1365
+msgid "Statistic"
+msgstr ""
+
+#: src/crosstabs.q:1103 src/crosstabs.q:1130 src/crosstabs.q:1150
+#: src/crosstabs.q:1172 src/examine.q:1134 src/frequencies.q:1143
+#: src/frequencies.q:1264 src/sysfile-info.c:536 src/vfm.c:811
+msgid "Value"
+msgstr ""
+
+#: src/crosstabs.q:1104 src/oneway.q:284 src/oneway.q:686 src/t-test.q:977
+#: src/t-test.q:1169 src/t-test.q:1261
+msgid "df"
+msgstr ""
+
+#: src/crosstabs.q:1106
+msgid "Asymp. Sig. (2-sided)"
+msgstr ""
+
+#: src/crosstabs.q:1108
+msgid "Exact. Sig. (2-sided)"
+msgstr ""
+
+#: src/crosstabs.q:1110
+msgid "Exact. Sig. (1-sided)"
+msgstr ""
+
+#: src/crosstabs.q:1128 src/crosstabs.q:1169
+msgid "Category"
+msgstr ""
+
+#: src/crosstabs.q:1131 src/crosstabs.q:1173
+msgid "Asymp. Std. Error"
+msgstr ""
+
+#: src/crosstabs.q:1132 src/crosstabs.q:1174
+msgid "Approx. T"
+msgstr ""
+
+#: src/crosstabs.q:1133 src/crosstabs.q:1175
+msgid "Approx. Sig."
+msgstr ""
+
+#: src/crosstabs.q:1148
+#, c-format
+msgid " 95%% Confidence Interval"
+msgstr ""
+
+#: src/crosstabs.q:1151 src/t-test.q:981 src/t-test.q:1166 src/t-test.q:1264
+msgid "Lower"
+msgstr ""
+
+#: src/crosstabs.q:1152 src/t-test.q:982 src/t-test.q:1167 src/t-test.q:1265
+msgid "Upper"
+msgstr ""
+
+#: src/crosstabs.q:1171
+msgid "Type"
+msgstr ""
+
+#: src/crosstabs.q:1920
+msgid "Pearson Chi-Square"
+msgstr ""
+
+#: src/crosstabs.q:1921
+msgid "Likelihood Ratio"
+msgstr ""
+
+#: src/crosstabs.q:1922
+msgid "Fisher's Exact Test"
+msgstr ""
+
+#: src/crosstabs.q:1923
+msgid "Continuity Correction"
+msgstr ""
+
+#: src/crosstabs.q:1924
+msgid "Linear-by-Linear Association"
+msgstr ""
+
+#: src/crosstabs.q:1961 src/crosstabs.q:2031 src/crosstabs.q:2090
+msgid "N of Valid Cases"
+msgstr ""
+
+#: src/crosstabs.q:1977 src/crosstabs.q:2106
+msgid "Nominal by Nominal"
+msgstr ""
+
+#: src/crosstabs.q:1978 src/crosstabs.q:2107
+msgid "Ordinal by Ordinal"
+msgstr ""
+
+#: src/crosstabs.q:1979
+msgid "Interval by Interval"
+msgstr ""
+
+#: src/crosstabs.q:1980
+msgid "Measure of Agreement"
+msgstr ""
+
+#: src/crosstabs.q:1985
+msgid "Phi"
+msgstr ""
+
+#: src/crosstabs.q:1986
+msgid "Cramer's V"
+msgstr ""
+
+#: src/crosstabs.q:1987
+msgid "Contingency Coefficient"
+msgstr ""
+
+#: src/crosstabs.q:1988
+msgid "Kendall's tau-b"
+msgstr ""
+
+#: src/crosstabs.q:1989
+msgid "Kendall's tau-c"
+msgstr ""
+
+#: src/crosstabs.q:1990
+msgid "Gamma"
+msgstr ""
+
+#: src/crosstabs.q:1991
+msgid "Spearman Correlation"
+msgstr ""
+
+#: src/crosstabs.q:1992
+msgid "Pearson's R"
+msgstr ""
+
+#: src/crosstabs.q:1993
+msgid "Kappa"
+msgstr ""
+
+#: src/crosstabs.q:2063
+#, c-format
+msgid "Odds Ratio for %s (%g / %g)"
+msgstr ""
+
+#: src/crosstabs.q:2066
+#, c-format
+msgid "Odds Ratio for %s (%.*s / %.*s)"
+msgstr ""
+
+#: src/crosstabs.q:2074
+#, c-format
+msgid "For cohort %s = %g"
+msgstr ""
+
+#: src/crosstabs.q:2077
+#, c-format
+msgid "For cohort %s = %.*s"
+msgstr ""
+
+#: src/crosstabs.q:2108
+msgid "Nominal by Interval"
+msgstr ""
+
+#: src/crosstabs.q:2113
+msgid "Lambda"
+msgstr ""
+
+#: src/crosstabs.q:2114
+msgid "Goodman and Kruskal tau"
+msgstr ""
+
+#: src/crosstabs.q:2115
+msgid "Uncertainty Coefficient"
+msgstr ""
+
+#: src/crosstabs.q:2116
+msgid "Somers' d"
+msgstr ""
+
+#: src/crosstabs.q:2117
+msgid "Eta"
+msgstr ""
+
+#: src/crosstabs.q:2122
+msgid "Symmetric"
+msgstr ""
+
+#: src/crosstabs.q:2123 src/crosstabs.q:2124
+#, c-format
+msgid "%s Dependent"
msgstr ""
#: src/data-in.c:61
+msgid "data-file error: "
+msgstr ""
+
+#: src/data-in.c:63
#, c-format
msgid "(column %d"
msgstr ""
-#: src/data-in.c:63
+#: src/data-in.c:65
#, c-format
msgid "(columns %d-%d"
msgstr ""
-#: src/data-in.c:64
+#: src/data-in.c:66
#, c-format
msgid ", field type %s) "
msgstr ""
-#: src/data-in.c:210
+#: src/data-in.c:212
msgid "Field does not form a valid floating-point constant."
msgstr ""
msgid "Unrecognized character in field."
msgstr ""
-#: src/data-in.c:343 src/data-in.c:596
+#: src/data-in.c:343 src/data-in.c:598
msgid "Field must have even length."
msgstr ""
-#: src/data-in.c:353 src/data-in.c:606
+#: src/data-in.c:353 src/data-in.c:608
msgid "Field must contain only hex digits."
msgstr ""
msgid "Error in syntax of zoned decimal number."
msgstr ""
-#: src/data-in.c:646
+#: src/data-in.c:648
msgid "Unexpected end of field."
msgstr ""
-#: src/data-in.c:672
+#: src/data-in.c:674
msgid "Digit expected in field."
msgstr ""
-#: src/data-in.c:697
+#: src/data-in.c:699
#, c-format
msgid "Day (%ld) must be between 1 and 31."
msgstr ""
-#: src/data-in.c:722
+#: src/data-in.c:724
msgid "Delimiter expected between fields in date."
msgstr ""
-#: src/data-in.c:755
+#: src/data-in.c:757
#, c-format
msgid "Parse error at `%c' expecting %s."
msgstr ""
-#: src/data-in.c:769
+#: src/data-in.c:771
#, c-format
msgid "Unknown %s `%.*s'."
msgstr ""
-#: src/data-in.c:819
+#: src/data-in.c:821
#, c-format
msgid "Month (%ld) must be between 1 and 12."
msgstr ""
-#: src/data-in.c:823
+#: src/data-in.c:825
msgid "month"
msgstr ""
-#: src/data-in.c:837
+#: src/data-in.c:839
#, c-format
msgid "Year (%ld) must be between 1582 and 19999."
msgstr ""
-#: src/data-in.c:848
+#: src/data-in.c:850
#, c-format
msgid "Trailing garbage \"%s\" following date."
msgstr ""
-#: src/data-in.c:863
+#: src/data-in.c:865
#, c-format
msgid "Julian day (%d) must be between 1 and 366."
msgstr ""
-#: src/data-in.c:875
+#: src/data-in.c:877
#, c-format
msgid "Year (%d) must be between 1582 and 19999."
msgstr ""
-#: src/data-in.c:891
+#: src/data-in.c:893
#, c-format
msgid "Quarter (%ld) must be between 1 and 4."
msgstr ""
-#: src/data-in.c:901
+#: src/data-in.c:903
msgid "`Q' expected between quarter and year."
msgstr ""
-#: src/data-in.c:917
+#: src/data-in.c:919
#, c-format
msgid "Week (%ld) must be between 1 and 53."
msgstr ""
-#: src/data-in.c:928
+#: src/data-in.c:930
msgid "`WK' expected between week and year."
msgstr ""
-#: src/data-in.c:950
+#: src/data-in.c:952
msgid "Delimiter expected between fields in time."
msgstr ""
-#: src/data-in.c:962
+#: src/data-in.c:964
#, c-format
msgid "Hour (%ld) must be positive."
msgstr ""
-#: src/data-in.c:974
+#: src/data-in.c:976
#, c-format
msgid "Minute (%ld) must be between 0 and 59."
msgstr ""
-#: src/data-in.c:1021
+#: src/data-in.c:1023
#, c-format
msgid "Hour (%ld) must be between 0 and 23."
msgstr ""
-#: src/data-in.c:1049
+#: src/data-in.c:1051
msgid "weekday"
msgstr ""
-#: src/data-in.c:1380
+#: src/data-in.c:1382
#, c-format
msgid "Field too long (%d characters). Truncated after character %d."
msgstr ""
-#: src/data-list.c:141
+#: src/data-list.c:144
msgid ""
"DATA LIST may not use a different file from that specified on its "
"surrounding FILE TYPE."
msgstr ""
-#: src/data-list.c:160
+#: src/data-list.c:163
msgid "The END subcommand may only be specified once."
msgstr ""
-#: src/data-list.c:195
+#: src/data-list.c:198
msgid "Only one of FIXED, FREE, or LIST may be specified."
msgstr ""
-#: src/data-list.c:351 src/print.c:296
+#: src/data-list.c:354 src/print.c:299
#, c-format
msgid ""
"The record number specified, %ld, is before the previous record, %d. Data "
"fields must be listed in order of increasing record number."
msgstr ""
-#: src/data-list.c:380 src/data-list.c:1727
+#: src/data-list.c:383 src/data-list.c:1747
msgid ""
"SPSS-like or FORTRAN-like format specification expected after variable names."
msgstr ""
-#: src/data-list.c:391
+#: src/data-list.c:394
msgid "At least one variable must be specified."
msgstr ""
-#: src/data-list.c:396 src/print.c:328
+#: src/data-list.c:399 src/print.c:331
msgid ""
"Variables are specified on records that should not exist according to "
"RECORDS subcommand."
msgstr ""
-#: src/data-list.c:429 src/data-list.c:443 src/print.c:520 src/print.c:533
+#: src/data-list.c:432 src/data-list.c:446 src/print.c:523 src/print.c:536
msgid "Column positions for fields must be positive."
msgstr ""
-#: src/data-list.c:448
+#: src/data-list.c:451
msgid "The ending column for a field must be greater than the starting column."
msgstr ""
-#: src/data-list.c:462 src/print.c:610
+#: src/data-list.c:465 src/print.c:613
#, c-format
msgid "The %d columns %d-%d can't be evenly divided into %d fields."
msgstr ""
-#: src/data-list.c:482 src/print.c:561
+#: src/data-list.c:485 src/print.c:564
msgid "A format specifier on this line has extra characters on the end."
msgstr ""
-#: src/data-list.c:497 src/print.c:577
+#: src/data-list.c:500 src/print.c:580
msgid "The value for number of decimal places must be at least 1."
msgstr ""
-#: src/data-list.c:511 src/print.c:590
+#: src/data-list.c:514 src/print.c:593
#, c-format
msgid "Input format %s doesn't accept decimal places."
msgstr ""
-#: src/data-list.c:558 src/data-list.c:654 src/data-list.c:868
+#: src/data-list.c:561 src/data-list.c:657 src/data-list.c:871
#, c-format
msgid "%s is a duplicate variable name."
msgstr ""
-#: src/data-list.c:563
+#: src/data-list.c:566
#, c-format
msgid "There is already a variable %s of a different type."
msgstr ""
-#: src/data-list.c:570
+#: src/data-list.c:573
#, c-format
msgid "There is already a string variable %s of a different width."
msgstr ""
-#: src/data-list.c:645
+#: src/data-list.c:648
msgid ""
"The number of format specifications exceeds the given number of variable "
"names."
msgstr ""
-#: src/data-list.c:758 src/print.c:765
+#: src/data-list.c:761 src/print.c:768
msgid ""
"There aren't enough format specifications to match the number of variable "
"names given."
msgstr ""
-#: src/data-list.c:785 src/data-list.c:909 src/descript.c:879 src/print.c:796
-#: src/sysfile-info.c:135 src/sysfile-info.c:369 src/vfm.c:809
+#: src/data-list.c:788 src/data-list.c:912 src/descript.c:883 src/print.c:799
+#: src/sysfile-info.c:138 src/sysfile-info.c:372 src/vfm.c:810
msgid "Variable"
msgstr ""
-#: src/data-list.c:786 src/print.c:797
+#: src/data-list.c:789 src/print.c:800
msgid "Record"
msgstr ""
-#: src/data-list.c:787 src/print.c:798
+#: src/data-list.c:790 src/print.c:801
msgid "Columns"
msgstr ""
-#: src/data-list.c:788 src/data-list.c:910 src/print.c:799
+#: src/data-list.c:791 src/data-list.c:913 src/print.c:802
msgid "Format"
msgstr ""
-#: src/data-list.c:804
+#: src/data-list.c:807
#, c-format
msgid "Reading %d record from file %s."
msgid_plural "Reading %d records from file %s."
msgstr[0] ""
msgstr[1] ""
-#: src/data-list.c:808
+#: src/data-list.c:811
#, c-format
msgid "Reading %d record from the command file."
msgid_plural "Reading %d records from the command file."
msgstr[0] ""
msgstr[1] ""
-#: src/data-list.c:926
+#: src/data-list.c:929
#, c-format
msgid "Reading free-form data from file %s."
msgstr ""
-#: src/data-list.c:929
+#: src/data-list.c:932
msgid "Reading free-form data from the command file."
msgstr ""
-#: src/data-list.c:980
+#: src/data-list.c:983
#, c-format
msgid "Quoted string missing terminating `%c'."
msgstr ""
-#: src/data-list.c:1089
+#: src/data-list.c:1092
#, c-format
msgid "Partial case of %d of %d records discarded."
msgstr ""
-#: src/data-list.c:1143
+#: src/data-list.c:1146
#, c-format
msgid "Partial case discarded. The first variable missing was %s."
msgstr ""
-#: src/data-list.c:1187
+#: src/data-list.c:1190
#, c-format
msgid ""
"Missing value(s) for all variables from %s onward. These will be filled "
"with the system-missing value or blanks, as appropriate."
msgstr ""
-#: src/data-list.c:1264
+#: src/data-list.c:1267
msgid "Attempt to read past end of file."
msgstr ""
-#: src/data-list.c:1401
+#: src/data-list.c:1408
msgid ""
"REPEATING DATA must use the same file as its corresponding DATA LIST or FILE "
"TYPE."
msgstr ""
-#: src/data-list.c:1411 src/data-list.c:1446 src/data-list.c:1459
-#: src/data-list.c:1472 src/data-list.c:1505
+#: src/data-list.c:1418 src/data-list.c:1452 src/data-list.c:1465
+#: src/data-list.c:1478 src/data-list.c:1512
#, c-format
msgid "%s subcommand given multiple times."
msgstr ""
-#: src/data-list.c:1435
+#: src/data-list.c:1441
#, c-format
msgid "STARTS beginning column (%d) exceeds STARTS ending column (%d)."
msgstr ""
-#: src/data-list.c:1491
+#: src/data-list.c:1498
#, c-format
msgid "CONTINUED beginning column (%d) exceeds CONTINUED ending column (%d)."
msgstr ""
-#: src/data-list.c:1514
+#: src/data-list.c:1521
#, c-format
msgid "ID beginning column (%ld) must be positive."
msgstr ""
-#: src/data-list.c:1529
+#: src/data-list.c:1536
#, c-format
msgid "ID ending column (%ld) must be positive."
msgstr ""
-#: src/data-list.c:1535
+#: src/data-list.c:1542
#, c-format
msgid "ID ending column (%ld) cannot be less than ID beginning column (%d)."
msgstr ""
-#: src/data-list.c:1575
+#: src/data-list.c:1582
msgid "Missing required specification STARTS."
msgstr ""
-#: src/data-list.c:1577
+#: src/data-list.c:1584
msgid "Missing required specification OCCURS."
msgstr ""
-#: src/data-list.c:1584
+#: src/data-list.c:1591
msgid "ID specified without CONTINUED."
msgstr ""
-#: src/data-list.c:1676
+#: src/data-list.c:1602
+#, c-format
+msgid ""
+"STARTS beginning column (%d) exceeds default STARTS ending column taken from "
+"file's record width (%d)."
+msgstr ""
+
+#: src/data-list.c:1615
+#, c-format
+msgid ""
+"CONTINUED beginning column (%d) exceeds default CONTINUED ending column "
+"taken from file's record width (%d)."
+msgstr ""
+
+#: src/data-list.c:1696
msgid "String variable not allowed here."
msgstr ""
-#: src/data-list.c:1686
+#: src/data-list.c:1706
#, c-format
msgid "%s (%d) must be at least 1."
msgstr ""
-#: src/data-list.c:1692
+#: src/data-list.c:1712
#, c-format
msgid "Variable or integer expected for %s."
msgstr ""
-#: src/data-list.c:1825
+#: src/data-list.c:1837
#, c-format
msgid "Encountered mismatched record ID \"%s\" expecting \"%s\"."
msgstr ""
-#: src/data-list.c:1857
+#: src/data-list.c:1869
#, c-format
msgid ""
"Variable %s starting in column %d extends beyond physical record length of %"
"d."
msgstr ""
-#: src/data-list.c:1925
+#: src/data-list.c:1937
#, c-format
msgid "Invalid value %d for OCCURS."
msgstr ""
-#: src/data-list.c:1931
+#: src/data-list.c:1943
#, c-format
msgid "Beginning column for STARTS (%d) must be at least 1."
msgstr ""
-#: src/data-list.c:1939
+#: src/data-list.c:1951
#, c-format
msgid "Ending column for STARTS (%d) is less than beginning column (%d)."
msgstr ""
-#: src/data-list.c:1947
+#: src/data-list.c:1959
#, c-format
msgid "Invalid value %d for LENGTH."
msgstr ""
-#: src/data-list.c:1954
+#: src/data-list.c:1966
#, c-format
msgid "Beginning column for CONTINUED (%d) must be at least 1."
msgstr ""
-#: src/data-list.c:1962
+#: src/data-list.c:1974
#, c-format
msgid "Ending column for CONTINUED (%d) is less than beginning column (%d)."
msgstr ""
-#: src/data-list.c:1994
+#: src/data-list.c:2006
#, c-format
msgid ""
"Number of repetitions specified on OCCURS (%d) exceed number of repetitions "
"available in space on STARTS (%d), and CONTINUED not specified."
msgstr ""
-#: src/data-list.c:2012
+#: src/data-list.c:2024
#, c-format
msgid "Unexpected end of file with %d repetitions remaining out of %d."
msgstr ""
-#: src/data-out.c:242
+#: src/data-out.c:245
msgid ""
"The N output format cannot be used to output a negative number or the system-"
"missing value."
msgstr ""
-#: src/data-out.c:356
+#: src/data-out.c:359
#, c-format
msgid ""
"Quality of zoned decimal (Z) output format code is suspect. Check your "
"results. Report bugs to %s."
msgstr ""
-#: src/data-out.c:364
+#: src/data-out.c:367
msgid "The system-missing value cannot be output as a zoned decimal number."
msgstr ""
-#: src/data-out.c:377
+#: src/data-out.c:380
#, c-format
msgid "Number %g too big to fit in field with format Z%d.%d."
msgstr ""
-#: src/data-out.c:771
+#: src/data-out.c:774
#, c-format
msgid "Time value %g too large in magnitude to convert to alphanumeric time."
msgstr ""
-#: src/data-out.c:822
+#: src/data-out.c:825
#, c-format
msgid "Weekday index %f does not lie between 1 and 7."
msgstr ""
-#: src/data-out.c:842
+#: src/data-out.c:845
#, c-format
msgid "Month index %f does not lie between 1 and 12."
msgstr ""
-#: src/data-out.c:955
+#: src/data-out.c:958
#, c-format
msgid ""
"Year %d cannot be represented in four digits for output formatting purposes."
msgstr ""
-#: src/date.c:32
+#: src/date.c:35
msgid "Only USE ALL is currently implemented."
msgstr ""
-#: src/descript.c:99 src/examine.q:1466 src/frequencies.q:112 src/oneway.q:394
-#: src/t-test.q:676 src/t-test.q:699 src/t-test.q:822 src/t-test.q:1159
+#: src/descript.c:103 src/examine.q:1470 src/frequencies.q:117
+#: src/oneway.q:398 src/t-test.q:680 src/t-test.q:703 src/t-test.q:826
+#: src/t-test.q:1163
msgid "Mean"
msgstr ""
-#: src/descript.c:100
+#: src/descript.c:104
msgid "S E Mean"
msgstr ""
-#: src/descript.c:101 src/frequencies.q:116
+#: src/descript.c:105 src/frequencies.q:121
msgid "Std Dev"
msgstr ""
-#: src/descript.c:102 src/examine.q:1546 src/frequencies.q:117
+#: src/descript.c:106 src/examine.q:1550 src/frequencies.q:122
msgid "Variance"
msgstr ""
-#: src/descript.c:103 src/examine.q:1653 src/frequencies.q:118
+#: src/descript.c:107 src/examine.q:1657 src/frequencies.q:123
msgid "Kurtosis"
msgstr ""
-#: src/descript.c:104
+#: src/descript.c:108
msgid "S E Kurt"
msgstr ""
-#: src/descript.c:105 src/examine.q:1633 src/frequencies.q:120
+#: src/descript.c:109 src/examine.q:1637 src/frequencies.q:125
msgid "Skewness"
msgstr ""
-#: src/descript.c:106
+#: src/descript.c:110
msgid "S E Skew"
msgstr ""
-#: src/descript.c:107 src/examine.q:1594 src/frequencies.q:122
+#: src/descript.c:111 src/examine.q:1598 src/frequencies.q:127
msgid "Range"
msgstr ""
-#: src/descript.c:108 src/examine.q:1571 src/frequencies.q:123
-#: src/oneway.q:406
+#: src/descript.c:112 src/examine.q:1575 src/frequencies.q:128
+#: src/oneway.q:410
msgid "Minimum"
msgstr ""
-#: src/descript.c:109 src/examine.q:1582 src/frequencies.q:124
-#: src/oneway.q:407
+#: src/descript.c:113 src/examine.q:1586 src/frequencies.q:129
+#: src/oneway.q:411
msgid "Maximum"
msgstr ""
-#: src/descript.c:110 src/frequencies.q:125
+#: src/descript.c:114 src/frequencies.q:130
msgid "Sum"
msgstr ""
-#: src/descript.c:333
+#: src/descript.c:337
#, c-format
msgid "Z-score variable name %s would be a duplicate variable name."
msgstr ""
-#: src/descript.c:351 src/list.q:142
+#: src/descript.c:355 src/list.q:146
msgid "No variables specified."
msgstr ""
-#: src/descript.c:435
+#: src/descript.c:439
msgid "expecting statistic name: reverting to default"
msgstr ""
-#: src/descript.c:507
+#: src/descript.c:511
msgid ""
"Ran out of generic names for Z-score variables. There are only 126 generic "
"names: ZSC001-ZSC0999, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09."
msgstr ""
-#: src/descript.c:538
+#: src/descript.c:542
msgid "Mapping of variables to corresponding Z-scores."
msgstr ""
-#: src/descript.c:543
+#: src/descript.c:547
msgid "Source"
msgstr ""
-#: src/descript.c:544
+#: src/descript.c:548
msgid "Target"
msgstr ""
-#: src/descript.c:663 src/descript.c:669
+#: src/descript.c:667 src/descript.c:673
msgid "Z-score of "
msgstr ""
-#: src/descript.c:882
+#: src/descript.c:886
msgid "Valid N"
msgstr ""
-#: src/descript.c:883
+#: src/descript.c:887
msgid "Missing N"
msgstr ""
-#: src/descript.c:909
+#: src/descript.c:913
#, c-format
msgid "Valid cases = %g; cases with missing value(s) = %g."
msgstr ""
-#: src/devind.c:136
+#: src/devind.c:139
#, c-format
msgid "DEVIND driver initializing as `%s'..."
msgstr ""
-#: src/devind.c:218
+#: src/devind.c:221
#, c-format
msgid "Unknown configuration parameter `%s' for DEVIND device driver."
msgstr ""
-#: src/devind.c:240
+#: src/devind.c:243
#, c-format
msgid "DEVIND output driver: %s: %s"
msgstr ""
-#: src/devind.c:271
+#: src/devind.c:274
#, c-format
msgid "Cannot open first page on DEVIND device %s."
msgstr ""
-#: src/dfm-read.c:153
+#: src/dfm-read.c:157
#, c-format
msgid "Could not open \"%s\" for reading as a data file: %s."
msgstr ""
-#: src/dfm-read.c:186 src/dfm-read.c:204
+#: src/dfm-read.c:190 src/dfm-read.c:208
msgid "BEGIN DATA expected."
msgstr ""
-#: src/dfm-read.c:213
+#: src/dfm-read.c:217
msgid ""
"Unexpected end-of-file while reading data in BEGIN DATA. This probably "
"indicates a missing or misformatted END DATA command. END DATA must appear "
"by itself on a single line with exactly one space between words."
msgstr ""
-#: src/dfm-read.c:246 src/dfm-read.c:266
+#: src/dfm-read.c:250 src/dfm-read.c:270
#, c-format
msgid "Error reading file %s: %s."
msgstr ""
-#: src/dfm-read.c:269
+#: src/dfm-read.c:273
#, c-format
msgid "%s: Partial record at end of file."
msgstr ""
-#: src/dfm-read.c:312
+#: src/dfm-read.c:316
#, c-format
msgid "Attempt to read beyond end-of-file on file %s."
msgstr ""
-#: src/dfm-read.c:315
+#: src/dfm-read.c:319
msgid "Attempt to read beyond END DATA."
msgstr ""
-#: src/dfm-read.c:462
+#: src/dfm-read.c:466
msgid ""
"This command is not valid here since the current input program does not "
"access the inline file."
msgstr ""
-#: src/dfm-write.c:67
+#: src/dfm-write.c:70
#, c-format
msgid "An error occurred while opening \"%s\" for writing as a data file: %s."
msgstr ""
-#: src/dfm-write.c:103
+#: src/dfm-write.c:106
#, c-format
msgid "Error writing file %s: %s."
msgstr ""
-#: src/dictionary.c:682
+#: src/dictionary.c:685
msgid ""
"At least one case in the data file had a weight value that was user-missing, "
"system-missing, zero, or negative. These case(s) were ignored."
msgstr ""
-#: src/do-if.c:113
+#: src/do-if.c:116
msgid "There is no DO IF to match with this ELSE IF."
msgstr ""
-#: src/do-if.c:118
+#: src/do-if.c:121
msgid "The ELSE command must follow all ELSE IF commands in a DO IF structure."
msgstr ""
-#: src/do-if.c:141
+#: src/do-if.c:144
msgid "End of command expected."
msgstr ""
-#: src/do-if.c:157
+#: src/do-if.c:160
msgid "There is no DO IF to match with this ELSE."
msgstr ""
-#: src/do-if.c:163
+#: src/do-if.c:166
msgid ""
"There may be at most one ELSE clause in each DO IF structure. It must be "
"the last clause."
msgstr ""
-#: src/do-if.c:198
+#: src/do-if.c:201
msgid "There is no DO IF to match with this END IF."
msgstr ""
-#: src/do-if.c:284
+#: src/do-if.c:287
#, c-format
msgid "DO IF %d: true\n"
msgstr ""
-#: src/do-if.c:289
+#: src/do-if.c:292
#, c-format
msgid "DO IF %d: false\n"
msgstr ""
-#: src/do-if.c:294
+#: src/do-if.c:297
#, c-format
msgid "DO IF %d: missing\n"
msgstr ""
-#: src/error.c:93
+#: src/error.c:97
msgid "Terminating NOW due to a fatal error!"
msgstr ""
-#: src/error.c:170
+#: src/error.c:174
msgid "Terminating execution of syntax file due to error."
msgstr ""
-#: src/error.c:172
+#: src/error.c:176
#, c-format
msgid "Errors (%d) exceeds limit (%d)."
msgstr ""
-#: src/error.c:175
+#: src/error.c:179
#, c-format
msgid "Warnings (%d) exceed limit (%d)."
msgstr ""
-#: src/error.c:237
+#: src/error.c:243
msgid "fatal"
msgstr ""
-#: src/error.c:239 src/error.c:246 src/error.c:249
+#: src/error.c:245 src/error.c:252 src/error.c:255
msgid "error"
msgstr ""
-#: src/error.c:240 src/error.c:247 src/error.c:250
+#: src/error.c:246 src/error.c:253 src/error.c:256
msgid "warning"
msgstr ""
-#: src/error.c:241 src/error.c:251
+#: src/error.c:247 src/error.c:257
msgid "note"
msgstr ""
-#: src/error.c:243 src/error.c:244
+#: src/error.c:249 src/error.c:250
msgid "installation error"
msgstr ""
-#: src/filename.c:221
+#: src/examine.q:471 src/examine.q:483
#, c-format
-msgid "Searching for `%s'..."
+msgid "%s and %s are mutually exclusive"
msgstr ""
-#: src/filename.c:229 src/filename.c:261
-msgid "Search unsuccessful!"
+#: src/examine.q:913
+msgid "Case Processing Summary"
msgstr ""
-#: src/filename.c:254
-#, c-format
-msgid "Found `%s'."
+#: src/examine.q:1119
+msgid "Extreme Values"
msgstr ""
-#: src/filename.c:686
-#, c-format
-msgid "Not opening pipe file `%s' because SAFER option set."
+#: src/examine.q:1135
+msgid "Case Number"
msgstr ""
-#: src/file-type.c:131
-msgid "MIXED, GROUPED, or NESTED expected."
+#: src/examine.q:1220
+msgid "Highest"
msgstr ""
-#: src/file-type.c:154
-msgid "The CASE subcommand is not valid on FILE TYPE MIXED."
+#: src/examine.q:1225
+msgid "Lowest"
msgstr ""
-#: src/file-type.c:172
-msgid "WARN or NOWARN expected after WILD."
+#: src/examine.q:1366 src/oneway.q:400 src/oneway.q:684
+msgid "Std. Error"
msgstr ""
-#: src/file-type.c:180
-msgid "The DUPLICATE subcommand is not valid on FILE TYPE MIXED."
+#: src/examine.q:1368 src/oneway.q:414
+msgid "Descriptives"
msgstr ""
-#: src/file-type.c:194
-msgid "DUPLICATE=CASE is only valid on FILE TYPE NESTED."
+#: src/examine.q:1488 src/oneway.q:405
+#, c-format
+msgid "%g%% Confidence Interval for Mean"
msgstr ""
-#: src/file-type.c:203
+#: src/examine.q:1494 src/oneway.q:407
+msgid "Lower Bound"
+msgstr ""
+
+#: src/examine.q:1505 src/oneway.q:408
+msgid "Upper Bound"
+msgstr ""
+
+#: src/examine.q:1517
+#, c-format
+msgid "5%% Trimmed Mean"
+msgstr ""
+
+#: src/examine.q:1528 src/frequencies.q:119
+msgid "Median"
+msgstr ""
+
+#: src/examine.q:1562 src/oneway.q:399 src/t-test.q:681 src/t-test.q:704
+#: src/t-test.q:828 src/t-test.q:1164
+msgid "Std. Deviation"
+msgstr ""
+
+#: src/examine.q:1610
+msgid "Interquartile Range"
+msgstr ""
+
+#: src/examine.q:1762
+#, c-format
+msgid "Boxplot of %s vs. %s"
+msgstr ""
+
+#: src/examine.q:1787
+msgid "Boxplot"
+msgstr ""
+
+#: src/examine.q:1829
+#, c-format
+msgid "Normal Q-Q Plot of %s"
+msgstr ""
+
+#: src/examine.q:1830 src/examine.q:1836
+msgid "Observed Value"
+msgstr ""
+
+#: src/examine.q:1831
+msgid "Expected Normal"
+msgstr ""
+
+#: src/examine.q:1834
+#, c-format
+msgid "Detrended Normal Q-Q Plot of %s"
+msgstr ""
+
+#: src/examine.q:1837
+msgid "Dev from Normal"
+msgstr ""
+
+#: src/examine.q:1956 src/examine.q:1978 src/frequencies.q:1525
+msgid "Percentiles"
+msgstr ""
+
+#: src/examine.q:2103
+msgid "Tukey's Hinges"
+msgstr ""
+
+#: src/expressions/evaluate.c:144
+msgid "expecting number or string"
+msgstr ""
+
+#: src/expressions/evaluate.c:155 src/pfm-read.c:537
+#, c-format
+msgid "Duplicate variable name %s."
+msgstr ""
+
+#: src/expressions/helpers.c:36
+msgid ""
+"One of the arguments to a DATE function is not an integer. The result will "
+"be system-missing."
+msgstr ""
+
+#: src/expressions/helpers.c:58
+msgid ""
+"The week argument to DATE.WKYR is not an integer. The result will be system-"
+"missing."
+msgstr ""
+
+#: src/expressions/helpers.c:64
+msgid ""
+"The week argument to DATE.WKYR is outside the acceptable range of 1 to 53. "
+"The result will be system-missing."
+msgstr ""
+
+#: src/expressions/helpers.c:86
+msgid ""
+"The day argument to DATE.YRDAY is not an integer. The result will be system-"
+"missing."
+msgstr ""
+
+#: src/expressions/helpers.c:92
+msgid ""
+"The day argument to DATE.YRDAY is outside the acceptable range of 1 to 366. "
+"The result will be system-missing."
+msgstr ""
+
+#: src/expressions/helpers.c:114
+msgid ""
+"The year argument to YRMODA is greater than 47516. The result will be "
+"system-missing."
+msgstr ""
+
+#: src/expressions/parse.c:241
+#, c-format
+msgid ""
+"Type mismatch: expression has %s type, but a numeric value is required here."
+msgstr ""
+
+#: src/expressions/parse.c:253
+#, c-format
+msgid ""
+"Type mismatch: expression has %s type, but a string value is required here."
+msgstr ""
+
+#: src/expressions/parse.c:394
+#, c-format
+msgid "Type mismatch while applying %s operator: cannot convert %s to %s."
+msgstr ""
+
+#: src/expressions/parse.c:599
+msgid ""
+"Chaining relational operators (e.g. \"a < b < c\") will not produce the "
+"mathematically expected result. Use the AND logical operator to fix the "
+"problem (e.g. \"a < b AND b < c\"). If chaining is really intended, "
+"parentheses will disable this warning (e.g. \"(a < b) < c\".)"
+msgstr ""
+
+#: src/expressions/parse.c:698
+msgid ""
+"The exponentiation operator (\"**\") is left-associative, even though right-"
+"associative semantics are more useful. That is, \"a**b**c\" equals \"(a**b)"
+"**c\", not as \"a**(b**c)\". To disable this warning, insert parentheses."
+msgstr ""
+
+#: src/expressions/parse.c:760
+#, c-format
+msgid "Unknown system variable %s."
+msgstr ""
+
+#: src/expressions/parse.c:802
+#, c-format
+msgid "Unknown identifier %s."
+msgstr ""
+
+#: src/expressions/parse.c:837
+msgid "in expression"
+msgstr ""
+
+#: src/expressions/parse.c:1013
+#, c-format
+msgid "%s must have at least %d arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1022
+#, c-format
+msgid "%s must have even number of arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1025
+#, c-format
+msgid "%s must have multiple of %d arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1035
+#, c-format
+msgid "%s function does not accept a minimum valid argument count."
+msgstr ""
+
+#: src/expressions/parse.c:1044
+#, c-format
+msgid "%s requires at least %d valid arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1050
+#, c-format
+msgid ""
+"With %s, using minimum valid argument count of %d does not make sense when "
+"passing only %d arguments in list."
+msgstr ""
+
+#: src/expressions/parse.c:1104
+#, c-format
+msgid "Type mismatch invoking %s as "
+msgstr ""
+
+#: src/expressions/parse.c:1109
+msgid "Function invocation "
+msgstr ""
+
+#: src/expressions/parse.c:1111
+msgid " does not match any known function. Candidates are:"
+msgstr ""
+
+#: src/expressions/parse.c:1141
+#, c-format
+msgid "No function or vector named %s."
+msgstr ""
+
+#: src/expressions/parse.c:1183
+#, c-format
+msgid "expecting `,' or `)' invoking %s function"
+msgstr ""
+
+#: src/expressions/parse.c:1203
+#, c-format
+msgid "%s is a PSPP extension."
+msgstr ""
+
+#: src/file-handle.q:127
+#, c-format
+msgid ""
+"File handle %s already refers to file %s. File handles cannot be redefined "
+"within a session."
+msgstr ""
+
+#: src/file-handle.q:148
+msgid "The FILE HANDLE required subcommand NAME is not present."
+msgstr ""
+
+#: src/file-handle.q:167
+msgid ""
+"Fixed-length records were specified on /RECFORM, but record length was not "
+"specified on /LRECL. Assuming 1024-character records."
+msgstr ""
+
+#: src/file-handle.q:174
+#, c-format
+msgid ""
+"Record length (%ld) must be at least one byte. 1-character records will be "
+"assumed."
+msgstr ""
+
+#: src/file-handle.q:274
+#, c-format
+msgid "Can't open %s as a %s because it is already open as a %s"
+msgstr ""
+
+#: src/file-handle.q:281
+#, c-format
+msgid "Can't open %s as a %s for %s because it is already open for %s"
+msgstr ""
+
+#: src/file-handle.q:289
+#, c-format
+msgid "Can't re-open %s as a %s for %s"
+msgstr ""
+
+#: src/file-handle.q:342
+msgid "expecting a file name or handle name"
+msgstr ""
+
+#: src/file-type.c:134
+msgid "MIXED, GROUPED, or NESTED expected."
+msgstr ""
+
+#: src/file-type.c:157
+msgid "The CASE subcommand is not valid on FILE TYPE MIXED."
+msgstr ""
+
+#: src/file-type.c:175
+msgid "WARN or NOWARN expected after WILD."
+msgstr ""
+
+#: src/file-type.c:183
+msgid "The DUPLICATE subcommand is not valid on FILE TYPE MIXED."
+msgstr ""
+
+#: src/file-type.c:197
+msgid "DUPLICATE=CASE is only valid on FILE TYPE NESTED."
+msgstr ""
+
+#: src/file-type.c:206
#, c-format
msgid "WARN%s expected after DUPLICATE."
msgstr ""
-#: src/file-type.c:204
+#: src/file-type.c:207
msgid ", NOWARN, or CASE"
msgstr ""
-#: src/file-type.c:205
+#: src/file-type.c:208
msgid " or NOWARN"
msgstr ""
-#: src/file-type.c:213
+#: src/file-type.c:216
msgid "The MISSING subcommand is not valid on FILE TYPE MIXED."
msgstr ""
-#: src/file-type.c:225
+#: src/file-type.c:228
msgid "WARN or NOWARN after MISSING."
msgstr ""
-#: src/file-type.c:233
+#: src/file-type.c:236
msgid "ORDERED is only valid on FILE TYPE GROUPED."
msgstr ""
-#: src/file-type.c:244
+#: src/file-type.c:247
msgid "YES or NO expected after ORDERED."
msgstr ""
-#: src/file-type.c:250 src/file-type.c:545
+#: src/file-type.c:253 src/file-type.c:548
msgid "while expecting a valid subcommand"
msgstr ""
-#: src/file-type.c:257
+#: src/file-type.c:260
msgid "The required RECORD subcommand was not present."
msgstr ""
-#: src/file-type.c:265
+#: src/file-type.c:268
msgid "The required CASE subcommand was not present."
msgstr ""
-#: src/file-type.c:271
+#: src/file-type.c:274
msgid "CASE and RECORD must specify different variable names."
msgstr ""
-#: src/file-type.c:329
+#: src/file-type.c:332
msgid "Column value must be positive."
msgstr ""
-#: src/file-type.c:345
+#: src/file-type.c:348
msgid "Ending column precedes beginning column."
msgstr ""
-#: src/file-type.c:365
+#: src/file-type.c:368
msgid "Bad format specifier name."
msgstr ""
-#: src/file-type.c:394 src/file-type.c:583
+#: src/file-type.c:397 src/file-type.c:586
msgid ""
"This command may only appear within a FILE TYPE/END FILE TYPE structure."
msgstr ""
-#: src/file-type.c:417
+#: src/file-type.c:420
msgid "OTHER may appear only on the last RECORD TYPE command."
msgstr ""
-#: src/file-type.c:427
+#: src/file-type.c:430
msgid "No input commands (DATA LIST, REPEATING DATA) for above RECORD TYPE."
msgstr ""
-#: src/file-type.c:478
+#: src/file-type.c:481
msgid ""
"The CASE subcommand is not allowed on the RECORD TYPE command for FILE TYPE "
"MIXED."
msgstr ""
-#: src/file-type.c:488
+#: src/file-type.c:491
msgid ""
"No variable name may be specified for the CASE subcommand on RECORD TYPE."
msgstr ""
-#: src/file-type.c:496
+#: src/file-type.c:499
msgid ""
"The CASE column specification on RECORD TYPE must give a format specifier "
"that is the same type as that of the CASE column specification given on FILE "
"TYPE."
msgstr ""
-#: src/file-type.c:512
+#: src/file-type.c:515
msgid "WARN or NOWARN expected on DUPLICATE subcommand."
msgstr ""
-#: src/file-type.c:526
+#: src/file-type.c:529
msgid "WARN or NOWARN expected on MISSING subcommand."
msgstr ""
-#: src/file-type.c:539
+#: src/file-type.c:542
msgid "YES or NO expected on SPREAD subcommand."
msgstr ""
-#: src/file-type.c:596
+#: src/file-type.c:599
msgid "No input commands (DATA LIST, REPEATING DATA) on above RECORD TYPE."
msgstr ""
-#: src/file-type.c:603
+#: src/file-type.c:606
msgid "No commands between FILE TYPE and END FILE TYPE."
msgstr ""
-#: src/file-type.c:672
+#: src/file-type.c:675
#, c-format
msgid "Unknown record type \"%.*s\"."
msgstr ""
-#: src/file-type.c:696
+#: src/file-type.c:699
#, c-format
msgid "Unknown record type %g."
msgstr ""
-#: src/flip.c:85
+#: src/filename.c:227
+#, c-format
+msgid "Searching for `%s'..."
+msgstr ""
+
+#: src/filename.c:235 src/filename.c:267
+msgid "Search unsuccessful!"
+msgstr ""
+
+#: src/filename.c:260
+#, c-format
+msgid "Found `%s'."
+msgstr ""
+
+#: src/filename.c:665
+#, c-format
+msgid "Not opening pipe file `%s' because SAFER option set."
+msgstr ""
+
+#: src/flip.c:88
msgid ""
"FLIP ignores TEMPORARY. Temporary transformations will be made permanent."
msgstr ""
-#: src/flip.c:229
+#: src/flip.c:232
#, c-format
msgid "Could not create acceptable variant for variable %s."
msgstr ""
-#: src/flip.c:245
+#: src/flip.c:248
msgid "Cannot create more than 99999 variable names."
msgstr ""
-#: src/flip.c:289
+#: src/flip.c:292
msgid "Could not create temporary file for FLIP."
msgstr ""
-#: src/flip.c:297 src/flip.c:364
+#: src/flip.c:300 src/flip.c:367
#, c-format
msgid "Error writing FLIP file: %s."
msgstr ""
-#: src/flip.c:406
+#: src/flip.c:409
#, c-format
msgid "Error rewinding FLIP file: %s."
msgstr ""
-#: src/flip.c:410
+#: src/flip.c:413
msgid "Error creating FLIP source file."
msgstr ""
-#: src/flip.c:419
+#: src/flip.c:422
#, c-format
msgid "Error reading FLIP file: %s."
msgstr ""
-#: src/flip.c:440
+#: src/flip.c:443
#, c-format
msgid "Error seeking FLIP source file: %s."
msgstr ""
-#: src/flip.c:445
+#: src/flip.c:448
#, c-format
msgid "Error writing FLIP source file: %s."
msgstr ""
-#: src/flip.c:456
+#: src/flip.c:459
#, c-format
msgid "Error rewind FLIP source file: %s."
msgstr ""
-#: src/flip.c:508
+#: src/flip.c:511
#, c-format
msgid "Error reading FLIP temporary file: %s."
msgstr ""
-#: src/flip.c:511
+#: src/flip.c:514
msgid "Unexpected end of file reading FLIP temporary file."
msgstr ""
-#: src/format.c:74
+#: src/format.c:77
msgid "X and T format specifiers not allowed here."
msgstr ""
-#: src/format.c:82
+#: src/format.c:85
#, c-format
msgid "%.*s is not a valid data format."
msgstr ""
-#: src/format.c:131
+#: src/format.c:134
#, c-format
-msgid ""
-"Format %s specifies an odd width %d, but format %s requires an even width."
+msgid "Format %s specifies an odd width %d, but an even width is required."
msgstr ""
-#: src/format.c:139
+#: src/format.c:142
#, c-format
msgid ""
"Format %s specifies a bad number of implied decimal places %d. Input format "
"%s allows up to 16 implied decimal places."
msgstr ""
-#: src/format.c:163
+#: src/format.c:166
#, c-format
msgid "Format %s may not be used for input."
msgstr ""
-#: src/format.c:169
+#: src/format.c:172
#, c-format
msgid ""
"Input format %s specifies a bad width %d. Format %s requires a width "
"between %d and %d."
msgstr ""
-#: src/format.c:179
+#: src/format.c:182
#, c-format
msgid ""
"Input format %s is invalid because it specifies more decimal places than the "
"field width."
msgstr ""
-#: src/format.c:202
+#: src/format.c:205
#, c-format
msgid ""
"Output format %s specifies a bad width %d. Format %s requires a width "
"between %d and %d."
msgstr ""
-#: src/format.c:212
+#: src/format.c:215
#, c-format
msgid ""
"Output format %s is invalid because it specifies as many decimal places as "
"d instead."
msgstr ""
-#: src/format.c:234
+#: src/format.c:237
#, c-format
msgid "%s variables are not compatible with %s format %s."
msgstr ""
-#: src/format.c:235 src/pfm-read.c:473 src/sfm-read.c:1027 src/sfm-read.c:1036
+#: src/format.c:238 src/pfm-read.c:477 src/sfm-read.c:1030 src/sfm-read.c:1039
msgid "String"
msgstr ""
-#: src/format.c:235 src/pfm-read.c:473 src/sfm-read.c:1027 src/sfm-read.c:1036
+#: src/format.c:238 src/pfm-read.c:477 src/sfm-read.c:1030 src/sfm-read.c:1039
msgid "Numeric"
msgstr ""
-#: src/format.c:255
+#: src/format.c:258
#, c-format
msgid "String variable with width %d not compatible with format %s."
msgstr ""
-#: src/format.c:379
+#: src/format.c:382
msgid "Format specifier expected."
msgstr ""
-#: src/format.c:391
+#: src/format.c:394
#, c-format
msgid "Data format %s does not specify a width."
msgstr ""
-#: src/format.c:409
+#: src/format.c:412
#, c-format
msgid "Data format %s is not valid."
msgstr ""
-#: src/formats.c:86
+#: src/formats.c:89
msgid "`(' expected after variable list"
msgstr ""
-#: src/formats.c:96 src/numeric.c:65 src/numeric.c:136
+#: src/formats.c:99 src/numeric.c:68 src/numeric.c:139
msgid "`)' expected after output format."
msgstr ""
-#: src/get.c:246
-#, c-format
-msgid "The required %s subcommand was not present"
+#: src/frequencies.q:118
+msgid "S.E. Mean"
msgstr ""
-#: src/get.c:252
-#, c-format
-msgid "Unsupported sysfile version: %d. Using version %d instead."
+#: src/frequencies.q:120
+msgid "Mode"
msgstr ""
-#: src/get.c:408 src/print.c:179
-msgid "expecting a valid subcommand"
+#: src/frequencies.q:124
+msgid "S.E. Kurt"
msgstr ""
-#: src/get.c:451
-#, c-format
-msgid ""
-"Cannot rename %s as %s because there already exists a variable named %s. To "
-"rename variables with overlapping names, use a single RENAME subcommand such "
-"as \"/RENAME (A=B)(B=C)(C=A)\", or equivalently, \"/RENAME (A B C=B C A)\"."
+#: src/frequencies.q:126
+msgid "S.E. Skew"
msgstr ""
-#: src/get.c:476
-msgid "`=' expected after variable list."
+#: src/frequencies.q:401
+msgid ""
+"At most one of BARCHART, HISTOGRAM, or HBAR should be given. HBAR will be "
+"assumed. Argument values will be given precedence increasing along the "
+"order given."
msgstr ""
-#: src/get.c:483
+#: src/frequencies.q:484
#, c-format
msgid ""
-"Number of variables on left side of `=' (%d) does not match number of "
-"variables on right side (%d), in parenthesized group %d of RENAME subcommand."
+"MAX must be greater than or equal to MIN, if both are specified. However, "
+"MIN was specified as %g and MAX as %g. MIN and MAX will be ignored."
msgstr ""
-#: src/get.c:496
-#, c-format
-msgid "Requested renaming duplicates variable name %s."
+#: src/frequencies.q:807
+msgid ""
+"Upper limit of integer mode value range must be greater than lower limit."
msgstr ""
-#: src/get.c:526
-msgid "Cannot DROP all variables from dictionary."
+#: src/frequencies.q:820
+#, c-format
+msgid "Variable %s specified multiple times on VARIABLES subcommand."
msgstr ""
-#: src/get.c:787
-msgid "The active file may not be specified more than once."
+#: src/frequencies.q:826
+#, c-format
+msgid "Integer mode specified, but %s is not a numeric variable."
msgstr ""
-#: src/get.c:796
-msgid "Cannot specify the active file since no active file has been defined."
+#: src/frequencies.q:892
+msgid "`)' expected after GROUPED interval list."
msgstr ""
-#: src/get.c:804
-msgid ""
-"MATCH FILES may not be used after TEMPORARY when the active file is an input "
-"source. Temporary transformations will be made permanent."
+#: src/frequencies.q:904
+#, c-format
+msgid "Variables %s specified on GROUPED but not on VARIABLES."
msgstr ""
-#: src/get.c:842
-msgid "Multiple IN subcommands for a single FILE or TABLE."
+#: src/frequencies.q:911
+#, c-format
+msgid "Variables %s specified multiple times on GROUPED subcommand."
msgstr ""
-#: src/get.c:862
-msgid "BY may appear at most once."
+#: src/frequencies.q:1142 src/frequencies.q:1234 src/frequencies.q:1235
+#: src/frequencies.q:1267
+msgid "Cum"
msgstr ""
-#: src/get.c:882
-#, c-format
-msgid "File %s lacks BY variable %s."
+#: src/frequencies.q:1144 src/plot-hist.c:129
+msgid "Frequency"
msgstr ""
-#: src/get.c:895
-msgid "FIRST may appear at most once."
+#: src/frequencies.q:1164
+msgid "Value Label"
msgstr ""
-#: src/get.c:909
-msgid "LAST may appear at most once."
+#: src/frequencies.q:1265
+msgid "Freq"
msgstr ""
-#: src/get.c:950
-msgid "BY is required when TABLE is specified."
+#: src/frequencies.q:1266 src/frequencies.q:1268
+msgid "Pct"
msgstr ""
-#: src/get.c:955
-msgid "BY is required when IN is specified."
+#: src/frequencies.q:1487
+#, c-format
+msgid "No valid data for variable %s; statistics not displayed."
+msgstr ""
+
+#: src/get.c:249
+#, c-format
+msgid "The required %s subcommand was not present"
+msgstr ""
+
+#: src/get.c:255
+#, c-format
+msgid "Unsupported sysfile version: %d. Using version %d instead."
+msgstr ""
+
+#: src/get.c:411 src/print.c:182
+msgid "expecting a valid subcommand"
+msgstr ""
+
+#: src/get.c:454
+#, c-format
+msgid ""
+"Cannot rename %s as %s because there already exists a variable named %s. To "
+"rename variables with overlapping names, use a single RENAME subcommand such "
+"as \"/RENAME (A=B)(B=C)(C=A)\", or equivalently, \"/RENAME (A B C=B C A)\"."
+msgstr ""
+
+#: src/get.c:479
+msgid "`=' expected after variable list."
+msgstr ""
+
+#: src/get.c:486
+#, c-format
+msgid ""
+"Number of variables on left side of `=' (%d) does not match number of "
+"variables on right side (%d), in parenthesized group %d of RENAME subcommand."
+msgstr ""
+
+#: src/get.c:499
+#, c-format
+msgid "Requested renaming duplicates variable name %s."
+msgstr ""
+
+#: src/get.c:529
+msgid "Cannot DROP all variables from dictionary."
+msgstr ""
+
+#: src/get.c:790
+msgid "The active file may not be specified more than once."
+msgstr ""
+
+#: src/get.c:799
+msgid "Cannot specify the active file since no active file has been defined."
+msgstr ""
+
+#: src/get.c:807
+msgid ""
+"MATCH FILES may not be used after TEMPORARY when the active file is an input "
+"source. Temporary transformations will be made permanent."
+msgstr ""
+
+#: src/get.c:845
+msgid "Multiple IN subcommands for a single FILE or TABLE."
+msgstr ""
+
+#: src/get.c:865
+msgid "BY may appear at most once."
+msgstr ""
+
+#: src/get.c:885
+#, c-format
+msgid "File %s lacks BY variable %s."
+msgstr ""
+
+#: src/get.c:899
+msgid "FIRST may appear at most once."
+msgstr ""
+
+#: src/get.c:913
+msgid "LAST may appear at most once."
+msgstr ""
+
+#: src/get.c:954
+msgid "BY is required when TABLE is specified."
+msgstr ""
+
+#: src/get.c:959
+msgid "BY is required when IN is specified."
msgstr ""
-#: src/get.c:983
+#: src/get.c:987
#, c-format
msgid "IN variable name %s duplicates an existing variable name."
msgstr ""
-#: src/get.c:1417
+#: src/get.c:1416
#, c-format
msgid ""
"Variable %s in file %s (%s) has different type or width from the same "
"variable in earlier file (%s)."
msgstr ""
-#: src/get.c:1508
+#: src/get.c:1507
msgid "expecting COMM or TAPE"
msgstr ""
-#: src/getline.c:175
+#: src/getl.c:178
#, c-format
msgid "Can't find `%s' in include file search path."
msgstr ""
-#: src/getline.c:330
+#: src/getl.c:333
#, c-format
msgid "%s: Opening as syntax file."
msgstr ""
-#: src/getline.c:335
+#: src/getl.c:338
#, c-format
msgid "Opening `%s': %s."
msgstr ""
-#: src/getline.c:344 src/html.c:348 src/postscript.c:1466
+#: src/getl.c:347 src/html.c:349 src/postscript.c:1461
#, c-format
msgid "Reading `%s': %s."
msgstr ""
-#: src/getline.c:402
+#: src/getl.c:405
#, c-format
msgid "Closing `%s': %s."
msgstr ""
-#: src/groff-font.c:101
+#: src/groff-font.c:105
#, c-format
msgid "%s: Opening Groff font file..."
msgstr ""
-#: src/groff-font.c:155
+#: src/groff-font.c:159
msgid "Missing font name."
msgstr ""
-#: src/groff-font.c:165
+#: src/groff-font.c:169
msgid "Missing encoding filename."
msgstr ""
-#: src/groff-font.c:178
+#: src/groff-font.c:182
msgid "Bad spacewidth value."
msgstr ""
-#: src/groff-font.c:190
+#: src/groff-font.c:194
msgid "Bad slant value."
msgstr ""
-#: src/groff-font.c:215
+#: src/groff-font.c:219
#, c-format
msgid "Unknown ligature `%s'."
msgstr ""
-#: src/groff-font.c:250
+#: src/groff-font.c:254
msgid "Unexpected end of line reading character set."
msgstr ""
-#: src/groff-font.c:258
+#: src/groff-font.c:262
msgid "Can't use ditto mark for first character."
msgstr ""
-#: src/groff-font.c:263
+#: src/groff-font.c:267
msgid "Can't ditto into an unnamed character."
msgstr ""
-#: src/groff-font.c:280
+#: src/groff-font.c:284
#, c-format
msgid "Missing metrics for character `%s'."
msgstr ""
-#: src/groff-font.c:289
+#: src/groff-font.c:293
#, c-format
msgid "Missing type for character `%s'."
msgstr ""
-#: src/groff-font.c:298
+#: src/groff-font.c:302
#, c-format
msgid "Missing code for character `%s'."
msgstr ""
-#: src/groff-font.c:317
+#: src/groff-font.c:321
msgid "Malformed kernpair."
msgstr ""
-#: src/groff-font.c:324
+#: src/groff-font.c:328
msgid "Unexpected end of line reading kernpairs."
msgstr ""
-#: src/groff-font.c:330
+#: src/groff-font.c:334
msgid "Bad kern value."
msgstr ""
-#: src/groff-font.c:362
+#: src/groff-font.c:366
#, c-format
msgid "Font read successfully with internal name %s."
msgstr ""
-#: src/groff-font.c:383
+#: src/groff-font.c:387
msgid "Error reading font."
msgstr ""
-#: src/groff-font.c:394
+#: src/groff-font.c:398
msgid "installation error: Groff font error: "
msgstr ""
-#: src/groff-font.c:419
+#: src/groff-font.c:423
#, c-format
msgid "Bad character \\%3o."
msgstr ""
-#: src/groff-font.c:673
+#: src/groff-font.c:677
#, c-format
msgid "Groff font error: Cannot find \"%s\"."
msgstr ""
-#: src/groff-font.c:738
+#: src/groff-font.c:742
#, c-format
msgid "%s: Opening Groff description file..."
msgstr ""
-#: src/groff-font.c:754
+#: src/groff-font.c:758
msgid "Multiple `sizes' declarations."
msgstr ""
-#: src/groff-font.c:771
+#: src/groff-font.c:775
msgid "Unexpected end of file. Missing 0 terminator to `sizes' command?"
msgstr ""
-#: src/groff-font.c:783 src/groff-font.c:790 src/groff-font.c:803
+#: src/groff-font.c:787 src/groff-font.c:794 src/groff-font.c:807
msgid "Bad argument to `sizes'."
msgstr ""
-#: src/groff-font.c:795
+#: src/groff-font.c:799
msgid "Bad range in argument to `sizes'."
msgstr ""
-#: src/groff-font.c:824
+#: src/groff-font.c:828
msgid "Family name expected."
msgstr ""
-#: src/groff-font.c:829
+#: src/groff-font.c:833
msgid "This command already specified."
msgstr ""
-#: src/groff-font.c:849
+#: src/groff-font.c:853
#, c-format
msgid "%s: Device characteristic already defined."
msgstr ""
-#: src/groff-font.c:855
+#: src/groff-font.c:859
#, c-format
msgid "%s: Invalid numeric format."
msgstr ""
-#: src/groff-font.c:885
+#: src/groff-font.c:889
msgid "Missing `res', `unitwidth', and/or `sizes' line(s)."
msgstr ""
-#: src/groff-font.c:911
+#: src/groff-font.c:915
msgid "Description file read successfully."
msgstr ""
-#: src/groff-font.c:943
+#: src/groff-font.c:947
msgid "Error reading description file."
msgstr ""
-#: src/groff-font.c:1000
+#: src/groff-font.c:1004
msgid "<<fallback>>"
msgstr ""
-#: src/hash.c:577
+#: src/hash.c:581
#, c-format
msgid "hash table:"
msgstr ""
-#: src/html.c:67
+#: src/html.c:72
#, c-format
msgid "HTML driver initializing as `%s'..."
msgstr ""
-#: src/html.c:171
+#: src/html.c:176
#, c-format
msgid "Unknown configuration parameter `%s' for HTML device driver."
msgstr ""
-#: src/html.c:254
+#: src/html.c:257
msgid ""
"Cannot find HTML prologue. The use of `-vv' on the command line is "
"suggested as a debugging aid."
msgstr ""
-#: src/html.c:259
+#: src/html.c:262
#, c-format
msgid "%s: %s: Opening HTML prologue..."
msgstr ""
-#: src/html.c:286 src/html.c:297 src/postscript.c:1358 src/postscript.c:1369
+#: src/html.c:286 src/postscript.c:1353 src/postscript.c:1364
msgid "nobody"
msgstr ""
-#: src/html.c:293 src/html.c:298 src/postscript.c:1365 src/postscript.c:1370
+#: src/html.c:295 src/html.c:298 src/postscript.c:1360 src/postscript.c:1365
msgid "nowhere"
msgstr ""
-#: src/html.c:357
+#: src/html.c:358
#, c-format
msgid "%s: HTML prologue read successfully."
msgstr ""
-#: src/html.c:361
+#: src/html.c:362
#, c-format
msgid "%s: Error reading HTML prologue."
msgstr ""
-#: src/html.c:389
+#: src/html.c:390
#, c-format
msgid "HTML output driver: %s: %s"
msgstr ""
-#: src/html.c:420 src/list.q:252
+#: src/html.c:421 src/list.q:256
#, c-format
msgid "Cannot open first page on HTML device %s."
msgstr ""
-#: src/include.c:40
+#: src/include.c:43
msgid "expecting filename"
msgstr ""
-#: src/inpt-pgm.c:81
+#: src/inpt-pgm.c:84
msgid "No matching INPUT PROGRAM command."
msgstr ""
-#: src/inpt-pgm.c:86
+#: src/inpt-pgm.c:89
msgid ""
"No data-input or transformation commands specified between INPUT PROGRAM and "
"END INPUT PROGRAM."
msgstr ""
-#: src/inpt-pgm.c:284 src/inpt-pgm.c:412
+#: src/inpt-pgm.c:287 src/inpt-pgm.c:415
msgid ""
"This command may only be executed between INPUT PROGRAM and END INPUT "
"PROGRAM."
msgstr ""
-#: src/inpt-pgm.c:334
+#: src/inpt-pgm.c:337
msgid "COLUMN subcommand multiply specified."
msgstr ""
-#: src/inpt-pgm.c:385
+#: src/inpt-pgm.c:388
msgid ""
"REREAD: Column numbers must be positive finite numbers. Column set to 1."
msgstr ""
-#: src/lexer.c:252
+#: src/lexer.c:256
#, c-format
msgid "%s does not form a valid number."
msgstr ""
-#: src/lexer.c:369
+#: src/lexer.c:373
#, c-format
msgid "Bad character in input: `%c'."
msgstr ""
-#: src/lexer.c:371
+#: src/lexer.c:375
#, c-format
msgid "Bad character in input: `\\%o'."
msgstr ""
-#: src/lexer.c:409
+#: src/lexer.c:413
#, c-format
msgid "Syntax error %s at %s."
msgstr ""
-#: src/lexer.c:412
+#: src/lexer.c:416
#, c-format
msgid "Syntax error at %s."
msgstr ""
-#: src/lexer.c:530 src/lexer.c:547
+#: src/lexer.c:534 src/lexer.c:551
#, c-format
msgid "expecting `%s'"
msgstr ""
-#: src/lexer.c:561 src/val-labs.c:154
+#: src/lexer.c:565 src/val-labs.c:157
msgid "expecting string"
msgstr ""
-#: src/lexer.c:575 src/val-labs.c:163
+#: src/lexer.c:579 src/val-labs.c:166
msgid "expecting integer"
msgstr ""
-#: src/lexer.c:589
+#: src/lexer.c:593
msgid "expecting number"
msgstr ""
-#: src/lexer.c:603
+#: src/lexer.c:607
msgid "expecting identifier"
msgstr ""
-#: src/lexer.c:889
+#: src/lexer.c:893
msgid "<ERROR>"
msgstr ""
-#: src/lexer.c:1023 src/repeat.c:214
+#: src/lexer.c:1027 src/repeat.c:217
msgid "Unexpected end of file."
msgstr ""
-#: src/lexer.c:1032
+#: src/lexer.c:1036
msgid "binary"
msgstr ""
-#: src/lexer.c:1032
+#: src/lexer.c:1036
msgid "octal"
msgstr ""
-#: src/lexer.c:1032
+#: src/lexer.c:1036
msgid "hex"
msgstr ""
-#: src/lexer.c:1046
+#: src/lexer.c:1050
#, c-format
msgid "String of %s digits has %d characters, which is not a multiple of %d."
msgstr ""
-#: src/lexer.c:1075
+#: src/lexer.c:1079
#, c-format
msgid "`%c' is not a valid %s digit."
msgstr ""
-#: src/lexer.c:1106
+#: src/lexer.c:1110
msgid "Unterminated string constant."
msgstr ""
-#: src/lexer.c:1178
+#: src/lexer.c:1182
#, c-format
msgid "String exceeds 255 characters in length (%d characters)."
msgstr ""
-#: src/lexer.c:1193
+#: src/lexer.c:1197
msgid ""
"Sorry, literal strings may not contain null characters. Replacing with "
"spaces."
msgstr ""
-#: src/loop.c:194
+#: src/list.q:154
+#, c-format
+msgid ""
+"The first case (%ld) specified precedes the last case (%ld) specified. The "
+"values will be swapped."
+msgstr ""
+
+#: src/list.q:162
+#, c-format
+msgid ""
+"The first case (%ld) to list is less than 1. The value is being reset to 1."
+msgstr ""
+
+#: src/list.q:168
+#, c-format
+msgid ""
+"The last case (%ld) to list is less than 1. The value is being reset to 1."
+msgstr ""
+
+#: src/list.q:174
+#, c-format
+msgid "The step value %ld is less than 1. The value is being reset to 1."
+msgstr ""
+
+#: src/list.q:201
+msgid "`/FORMAT WEIGHT' specified, but weighting is not on."
+msgstr ""
+
+#: src/list.q:442
+msgid "Line"
+msgstr ""
+
+#: src/loop.c:197
msgid "The index variable may not be a string variable."
msgstr ""
-#: src/loop.c:300
+#: src/loop.c:303
msgid "There is no LOOP command that corresponds to this END LOOP."
msgstr ""
-#: src/loop.c:494
+#: src/loop.c:497
msgid ""
"This command may only appear enclosed in a LOOP/END LOOP control structure."
msgstr ""
-#: src/loop.c:500
+#: src/loop.c:503
msgid "BREAK not enclosed in DO IF structure."
msgstr ""
-#: src/loop.c:578
+#: src/loop.c:581
#, c-format
msgid "%s without %s."
msgstr ""
-#: src/main.c:86
+#: src/main.c:89
msgid "Error initializing output drivers."
msgstr ""
-#: src/main.c:156
+#: src/main.c:159
msgid "This command not executed."
msgstr ""
-#: src/main.c:160
+#: src/main.c:163
msgid ""
"Skipping the rest of this command. Part of this command may have been "
"executed."
msgstr ""
-#: src/main.c:165
+#: src/main.c:168
msgid ""
"Skipping the rest of this command. This command was fully executed up to "
"this point."
msgstr ""
-#: src/main.c:170
+#: src/main.c:173
msgid ""
"Trailing garbage was encountered following this command. The command was "
"fully executed to this point."
msgstr ""
-#: src/main.c:187
+#: src/main.c:190
msgid "The rest of this command has been discarded."
msgstr ""
-#: src/matrix-data.c:208
+#: src/matrix-data.c:211
msgid "VARIABLES subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:223
+#: src/matrix-data.c:226
msgid "VARNAME_ cannot be explicitly specified on VARIABLES."
msgstr ""
-#: src/matrix-data.c:284
+#: src/matrix-data.c:287
msgid "in FORMAT subcommand"
msgstr ""
-#: src/matrix-data.c:295
+#: src/matrix-data.c:298
msgid "SPLIT subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:302
+#: src/matrix-data.c:305
msgid "in SPLIT subcommand"
msgstr ""
-#: src/matrix-data.c:312
+#: src/matrix-data.c:315
msgid "Split variable may not be named ROWTYPE_ or VARNAME_."
msgstr ""
-#: src/matrix-data.c:346
+#: src/matrix-data.c:349
#, c-format
msgid "Split variable %s is already another type."
msgstr ""
-#: src/matrix-data.c:361
+#: src/matrix-data.c:364
msgid "FACTORS subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:379
+#: src/matrix-data.c:382
#, c-format
msgid "Factor variable %s is already another type."
msgstr ""
-#: src/matrix-data.c:394
+#: src/matrix-data.c:397
msgid "CELLS subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:400 src/matrix-data.c:419
+#: src/matrix-data.c:403 src/matrix-data.c:422
msgid "expecting positive integer"
msgstr ""
-#: src/matrix-data.c:413
+#: src/matrix-data.c:416
msgid "N subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:434
+#: src/matrix-data.c:437
msgid "CONTENTS subcommand multiply specified."
msgstr ""
-#: src/matrix-data.c:454
+#: src/matrix-data.c:457
msgid "Nested parentheses not allowed."
msgstr ""
-#: src/matrix-data.c:464
+#: src/matrix-data.c:467
msgid "Mismatched right parenthesis (`(')."
msgstr ""
-#: src/matrix-data.c:469
+#: src/matrix-data.c:472
msgid "Empty parentheses not allowed."
msgstr ""
-#: src/matrix-data.c:482 src/matrix-data.c:490
+#: src/matrix-data.c:485 src/matrix-data.c:493
msgid "in CONTENTS subcommand"
msgstr ""
-#: src/matrix-data.c:497
+#: src/matrix-data.c:500
#, c-format
msgid "Content multiply specified for %s."
msgstr ""
-#: src/matrix-data.c:514
+#: src/matrix-data.c:517
msgid "Missing right parenthesis."
msgstr ""
-#: src/matrix-data.c:534
+#: src/matrix-data.c:537
msgid "Missing VARIABLES subcommand."
msgstr ""
-#: src/matrix-data.c:540
+#: src/matrix-data.c:543
msgid ""
"CONTENTS subcommand not specified: assuming file contains only CORR matrix."
msgstr ""
-#: src/matrix-data.c:550
+#: src/matrix-data.c:553
msgid ""
"Missing CELLS subcommand. CELLS is required when ROWTYPE_ is not given in "
"the data and factors are present."
msgstr ""
-#: src/matrix-data.c:558
+#: src/matrix-data.c:561
msgid "Split file values must be present in the data when ROWTYPE_ is present."
msgstr ""
-#: src/matrix-data.c:611
+#: src/matrix-data.c:614
msgid "No continuous variables specified."
msgstr ""
-#: src/matrix-data.c:854
+#: src/matrix-data.c:857
msgid "Scope of string exceeds line."
msgstr ""
-#: src/matrix-data.c:919
+#: src/matrix-data.c:922
#, c-format
msgid "End of line expected %s while reading %s."
msgstr ""
-#: src/matrix-data.c:1104
+#: src/matrix-data.c:1107
#, c-format
msgid "expecting value for %s %s"
msgstr ""
-#: src/matrix-data.c:1268
+#: src/matrix-data.c:1271
#, c-format
msgid "Syntax error expecting SPLIT FILE value %s."
msgstr ""
-#: src/matrix-data.c:1277
+#: src/matrix-data.c:1280
#, c-format
msgid "Expecting value %g for %s."
msgstr ""
-#: src/matrix-data.c:1318 src/matrix-data.c:1781
+#: src/matrix-data.c:1321 src/matrix-data.c:1784
#, c-format
msgid "Syntax error expecting factor value %s."
msgstr ""
-#: src/matrix-data.c:1327
+#: src/matrix-data.c:1330
#, c-format
msgid "Syntax error expecting value %g for %s %s."
msgstr ""
-#: src/matrix-data.c:1561
+#: src/matrix-data.c:1564
#, c-format
msgid "Syntax error %s expecting SPLIT FILE value."
msgstr ""
-#: src/matrix-data.c:1688
+#: src/matrix-data.c:1691
#, c-format
msgid ""
"Expected %d lines of data for %s content; actually saw %d lines. No data "
"will be output for this content."
msgstr ""
-#: src/matrix-data.c:1723
+#: src/matrix-data.c:1726
#, c-format
msgid "Multiply specified ROWTYPE_ %s."
msgstr ""
-#: src/matrix-data.c:1728
+#: src/matrix-data.c:1731
#, c-format
msgid "Syntax error %s expecting ROWTYPE_ string."
msgstr ""
-#: src/matrix-data.c:1748
+#: src/matrix-data.c:1751
#, c-format
msgid "Syntax error %s."
msgstr ""
-#: src/matrix-data.c:1898
+#: src/matrix-data.c:1901
#, c-format
msgid "Duplicate specification for %s."
msgstr ""
-#: src/matrix-data.c:1910
+#: src/matrix-data.c:1913
#, c-format
msgid "Too many rows of matrix data for %s."
msgstr ""
-#: src/matrix-data.c:1958
+#: src/matrix-data.c:1961
#, c-format
msgid "Syntax error expecting value for %s %s."
msgstr ""
-#: src/mis-val.c:71
+#: src/means.q:104
+msgid "Missing required subcommand TABLES."
+msgstr ""
+
+#: src/means.q:138
+msgid "TABLES subcommand may not appear more than once."
+msgstr ""
+
+#: src/mis-val.c:74
msgid "`)' expected after value specification."
msgstr ""
-#: src/mis-val.c:101
+#: src/mis-val.c:104
#, c-format
msgid "`(' expected after variable name%s."
msgstr ""
-#: src/mis-val.c:113
+#: src/mis-val.c:116
msgid "Long string value specified."
msgstr ""
-#: src/mis-val.c:118
+#: src/mis-val.c:121
msgid "Short strings must be of equal width."
msgstr ""
-#: src/mis-val.c:175
+#: src/mis-val.c:178
#, c-format
msgid "Range %g THRU %g is not valid because %g is greater than %g."
msgstr ""
-#: src/mis-val.c:206
+#: src/mis-val.c:209
msgid "Number or range expected."
msgstr ""
-#: src/mis-val.c:239
+#: src/mis-val.c:242
msgid "At most one range can exist in the missing values for any one variable."
msgstr ""
-#: src/mis-val.c:245
+#: src/mis-val.c:248
msgid "At most one individual value can be missing along with one range."
msgstr ""
-#: src/mis-val.c:307
+#: src/mis-val.c:310
msgid "String is not of proper length."
msgstr ""
-#: src/mis-val.c:316 src/repeat.c:460
+#: src/mis-val.c:319 src/repeat.c:463
msgid "String expected."
msgstr ""
-#: src/mkfile.c:52
+#: src/mkfile.c:54
#, c-format
msgid "%s: Creating temporary file: %s."
msgstr ""
-#: src/mkfile.c:94
+#: src/mkfile.c:96
#, c-format
msgid "%s: Creating file: %s."
msgstr ""
-#: src/modify-vars.c:89
+#: src/modify-vars.c:92
msgid ""
"MODIFY VARS may not be used after TEMPORARY. Temporary transformations will "
"be made permanent."
msgstr ""
-#: src/modify-vars.c:113
+#: src/modify-vars.c:116
msgid "REORDER subcommand may be given at most once."
msgstr ""
-#: src/modify-vars.c:136
+#: src/modify-vars.c:139
msgid "Cannot specify ALL after specifying a set of variables."
msgstr ""
-#: src/modify-vars.c:146
+#: src/modify-vars.c:149
msgid "`(' expected on REORDER subcommand."
msgstr ""
-#: src/modify-vars.c:158
+#: src/modify-vars.c:161
msgid "`)' expected following variable names on REORDER subcommand."
msgstr ""
-#: src/modify-vars.c:176
+#: src/modify-vars.c:179
msgid "RENAME subcommand may be given at most once."
msgstr ""
-#: src/modify-vars.c:189
+#: src/modify-vars.c:192
msgid "`(' expected on RENAME subcommand."
msgstr ""
-#: src/modify-vars.c:197
+#: src/modify-vars.c:200
msgid ""
"`=' expected between lists of new and old variable names on RENAME "
"subcommand."
msgstr ""
-#: src/modify-vars.c:205 src/rename-vars.c:75
+#: src/modify-vars.c:208 src/rename-vars.c:78
#, c-format
msgid ""
"Differing number of variables in old name list (%d) and in new name list (%"
"d)."
msgstr ""
-#: src/modify-vars.c:216
+#: src/modify-vars.c:219
msgid "`)' expected after variable lists on RENAME subcommand."
msgstr ""
-#: src/modify-vars.c:230
+#: src/modify-vars.c:233
msgid ""
"KEEP subcommand may be given at most once. It may notbe given in "
"conjunction with the DROP subcommand."
msgstr ""
-#: src/modify-vars.c:272
+#: src/modify-vars.c:275
msgid ""
"DROP subcommand may be given at most once. It may not be given in "
"conjunction with the KEEP subcommand."
msgstr ""
-#: src/modify-vars.c:298
+#: src/modify-vars.c:301
#, c-format
msgid "Unrecognized subcommand name `%s'."
msgstr ""
-#: src/modify-vars.c:300
+#: src/modify-vars.c:303
msgid "Subcommand name expected."
msgstr ""
-#: src/modify-vars.c:308
+#: src/modify-vars.c:311
msgid "`/' or `.' expected."
msgstr ""
-#: src/moments.c:513
+#: src/moments.c:516
msgid "expecting weight value"
msgstr ""
-#: src/numeric.c:58
+#: src/numeric.c:61
#, c-format
msgid "Format type %s may not be used with a numeric variable."
msgstr ""
-#: src/numeric.c:77 src/numeric.c:159 src/vector.c:156
+#: src/numeric.c:80 src/numeric.c:162 src/vector.c:159
#, c-format
msgid "There is already a variable named %s."
msgstr ""
-#: src/numeric.c:129
+#: src/numeric.c:132
#, c-format
msgid "Format type %s may not be used with a string variable."
msgstr ""
-#: src/output.c:86
+#: src/oneway.q:174
+msgid "Number of contrast coefficients must equal the number of groups"
+msgstr ""
+
+#: src/oneway.q:183
+#, c-format
+msgid "Coefficients for contrast %d do not total zero"
+msgstr ""
+
+#: src/oneway.q:248
+#, c-format
+msgid "`%s' is not a variable name"
+msgstr ""
+
+#: src/oneway.q:283
+msgid "Sum of Squares"
+msgstr ""
+
+#: src/oneway.q:285
+msgid "Mean Square"
+msgstr ""
+
+#: src/oneway.q:286 src/t-test.q:974
+msgid "F"
+msgstr ""
+
+#: src/oneway.q:287 src/oneway.q:540
+msgid "Significance"
+msgstr ""
+
+#: src/oneway.q:309
+msgid "Between Groups"
+msgstr ""
+
+#: src/oneway.q:310
+msgid "Within Groups"
+msgstr ""
+
+#: src/oneway.q:357
+msgid "ANOVA"
+msgstr ""
+
+#: src/oneway.q:537
+msgid "Levene Statistic"
+msgstr ""
+
+#: src/oneway.q:538
+msgid "df1"
+msgstr ""
+
+#: src/oneway.q:539
+msgid "df2"
+msgstr ""
+
+#: src/oneway.q:543
+msgid "Test of Homogeneity of Variances"
+msgstr ""
+
+#: src/oneway.q:613
+msgid "Contrast Coefficients"
+msgstr ""
+
+#: src/oneway.q:615 src/oneway.q:682
+msgid "Contrast"
+msgstr ""
+
+#: src/oneway.q:680
+msgid "Contrast Tests"
+msgstr ""
+
+#: src/oneway.q:683
+msgid "Value of Contrast"
+msgstr ""
+
+#: src/oneway.q:685 src/t-test.q:976 src/t-test.q:1168 src/t-test.q:1260
+msgid "t"
+msgstr ""
+
+#: src/oneway.q:687 src/t-test.q:978 src/t-test.q:1170 src/t-test.q:1262
+msgid "Sig. (2-tailed)"
+msgstr ""
+
+#: src/oneway.q:731
+msgid "Assume equal variances"
+msgstr ""
+
+#: src/oneway.q:735
+msgid "Does not assume equal"
+msgstr ""
+
+#: src/output.c:89
msgid "Attempt to iterate driver list reentrantly."
msgstr ""
-#: src/output.c:163
+#: src/output.c:166
#, c-format
msgid "Unknown output driver `%s'."
msgstr ""
-#: src/output.c:165
+#: src/output.c:168
#, c-format
msgid "Output driver `%s' referenced but never defined."
msgstr ""
-#: src/output.c:295
-msgid "Cannot find output initialization file. Use `-vv' to view search path."
+#: src/output.c:298
+msgid ""
+"Cannot find output initialization file. Use `-vvvv' to view search path."
msgstr ""
-#: src/output.c:300
+#: src/output.c:303
#, c-format
msgid "%s: Opening device description file..."
msgstr ""
-#: src/output.c:304 src/output.c:1175 src/postscript.c:1102
+#: src/output.c:307 src/output.c:1183 src/postscript.c:1097
#, c-format
msgid "Opening %s: %s."
msgstr ""
-#: src/output.c:315 src/output.c:1186 src/postscript.c:1117
+#: src/output.c:318 src/output.c:1194 src/postscript.c:1112
#, c-format
msgid "Reading %s: %s."
msgstr ""
-#: src/output.c:337 src/output.c:499
+#: src/output.c:340 src/output.c:507
msgid "Syntax error."
msgstr ""
-#: src/output.c:347 src/postscript.c:1128
+#: src/output.c:350 src/postscript.c:1123
#, c-format
msgid "Closing %s: %s."
msgstr ""
-#: src/output.c:352
+#: src/output.c:355
msgid "No output drivers are active."
msgstr ""
-#: src/output.c:355
+#: src/output.c:358
msgid "Device definition file read successfully."
msgstr ""
-#: src/output.c:357
+#: src/output.c:360
msgid "Error reading device definition file."
msgstr ""
-#: src/output.c:471
+#: src/output.c:479
#, c-format
msgid ""
"Driver classes:\n"
"\t"
msgstr ""
-#: src/output.c:600
+#: src/output.c:608
msgid "Syntax error in string constant."
msgstr ""
-#: src/output.c:632
+#: src/output.c:640
msgid "Syntax error in options."
msgstr ""
-#: src/output.c:642
+#: src/output.c:650
msgid "Syntax error in options (`=' expected)."
msgstr ""
-#: src/output.c:649
+#: src/output.c:657
msgid "Syntax error in options (value expected after `=')."
msgstr ""
-#: src/output.c:721
+#: src/output.c:729
msgid "Driver name expected."
msgstr ""
-#: src/output.c:742
+#: src/output.c:750
msgid "Class name expected."
msgstr ""
-#: src/output.c:751
+#: src/output.c:759
#, c-format
msgid "Unknown output driver class `%s'."
msgstr ""
-#: src/output.c:758
+#: src/output.c:766
#, c-format
msgid "Can't initialize output driver class `%s'."
msgstr ""
-#: src/output.c:765
+#: src/output.c:773
#, c-format
msgid "Can't initialize output driver `%s' of class `%s'."
msgstr ""
-#: src/output.c:787
+#: src/output.c:795
#, c-format
msgid "Unknown device type `%s'."
msgstr ""
-#: src/output.c:799
+#: src/output.c:807
#, c-format
msgid "Can't complete initialization of output driver `%s' of class `%s'."
msgstr ""
-#: src/output.c:846
+#: src/output.c:854
#, c-format
msgid "Can't deinitialize output driver class `%s'."
msgstr ""
-#: src/output.c:919
+#: src/output.c:927
#, c-format
msgid "Trying to find keyword `%s'...\n"
msgstr ""
-#: src/output.c:1036
+#: src/output.c:1044
#, c-format
msgid "Unit \"%s\" is unknown in dimension \"%s\"."
msgstr ""
-#: src/output.c:1051
+#: src/output.c:1059
#, c-format
msgid "Bad dimension \"%s\"."
msgstr ""
-#: src/output.c:1077
+#: src/output.c:1085
#, c-format
msgid "`x' expected in paper size `%s'."
msgstr ""
-#: src/output.c:1087
+#: src/output.c:1095
#, c-format
msgid "Trailing garbage `%s' on paper size `%s'."
msgstr ""
-#: src/output.c:1136
+#: src/output.c:1144
msgid "Paper size name must not be empty."
msgstr ""
-#: src/output.c:1167
+#: src/output.c:1175
msgid "Cannot find `papersize' configuration file."
msgstr ""
-#: src/output.c:1171
+#: src/output.c:1179
#, c-format
msgid "%s: Opening paper size definition file..."
msgstr ""
-#: src/output.c:1213
+#: src/output.c:1221
msgid "Syntax error in paper size definition."
msgstr ""
-#: src/output.c:1242
+#: src/output.c:1250
msgid "Paper size definition file read successfully."
msgstr ""
-#: src/output.c:1244
+#: src/output.c:1252
msgid "Error reading paper size definition file."
msgstr ""
-#: src/output.c:1313
+#: src/output.c:1321
#, c-format
msgid "Error closing page on %s device of %s class."
msgstr ""
-#: src/output.c:1317
+#: src/output.c:1325
#, c-format
msgid "Error opening page on %s device of %s class."
msgstr ""
-#: src/percentiles.c:38
+#: src/percentiles.c:42
msgid "HAverage"
msgstr ""
-#: src/percentiles.c:39
+#: src/percentiles.c:43
msgid "Weighted Average"
msgstr ""
-#: src/percentiles.c:40
+#: src/percentiles.c:44
msgid "Rounded"
msgstr ""
-#: src/percentiles.c:41
+#: src/percentiles.c:45
msgid "Empirical"
msgstr ""
-#: src/percentiles.c:42
+#: src/percentiles.c:46
msgid "Empirical with averaging"
msgstr ""
-#: src/permissions.c:76
+#: src/permissions.c:77
#, c-format
msgid "Expecting %s or %s."
msgstr ""
-#: src/permissions.c:109
+#: src/permissions.c:110
#, c-format
msgid "Cannot stat %s: %s"
msgstr ""
-#: src/permissions.c:122
+#: src/permissions.c:123
#, c-format
msgid "Cannot change mode of %s: %s"
msgstr ""
-#: src/pfm-read.c:85
+#: src/pfm-read.c:88
#, c-format
msgid "portable file %s corrupt at offset %ld: "
msgstr ""
-#: src/pfm-read.c:112
+#: src/pfm-read.c:115
msgid "unexpected end of file"
msgstr ""
-#: src/pfm-read.c:170
+#: src/pfm-read.c:173
#, c-format
msgid ""
"An error occurred while opening \"%s\" for reading as a portable file: %s."
msgstr ""
-#: src/pfm-read.c:188
+#: src/pfm-read.c:191
msgid "Data record expected."
msgstr ""
-#: src/pfm-read.c:296
+#: src/pfm-read.c:299
msgid "Missing numeric terminator."
msgstr ""
-#: src/pfm-read.c:319
+#: src/pfm-read.c:322
msgid "Invalid integer."
msgstr ""
-#: src/pfm-read.c:330
+#: src/pfm-read.c:333
#, c-format
msgid "Bad string length %d."
msgstr ""
-#: src/pfm-read.c:401
+#: src/pfm-read.c:404
#, c-format
msgid "%s: Not a portable file."
msgstr ""
-#: src/pfm-read.c:425
+#: src/pfm-read.c:429
#, c-format
msgid "Bad date string length %d."
msgstr ""
-#: src/pfm-read.c:427
+#: src/pfm-read.c:431
#, c-format
msgid "Bad time string length %d."
msgstr ""
-#: src/pfm-read.c:465 src/sfm-read.c:1019
+#: src/pfm-read.c:469 src/sfm-read.c:1022
#, c-format
msgid "%s: Bad format specifier byte (%d)."
msgstr ""
-#: src/pfm-read.c:472 src/sfm-read.c:1035
+#: src/pfm-read.c:476 src/sfm-read.c:1038
#, c-format
msgid "%s variable %s has invalid format specifier %s."
msgstr ""
-#: src/pfm-read.c:487
+#: src/pfm-read.c:491
msgid "Expected variable count record."
msgstr ""
-#: src/pfm-read.c:491
+#: src/pfm-read.c:495
#, c-format
msgid "Invalid number of variables %d."
msgstr ""
-#: src/pfm-read.c:501
+#: src/pfm-read.c:505
#, c-format
msgid "Weight variable name (%s) truncated."
msgstr ""
-#: src/pfm-read.c:513
+#: src/pfm-read.c:517
msgid "Expected variable record."
msgstr ""
-#: src/pfm-read.c:517
+#: src/pfm-read.c:521
#, c-format
msgid "Invalid variable width %d."
msgstr ""
-#: src/pfm-read.c:525
+#: src/pfm-read.c:529
#, c-format
msgid "position %d: Invalid variable name `%s'."
msgstr ""
-#: src/pfm-read.c:533
-#, c-format
-msgid "Duplicate variable name %s."
-msgstr ""
-
-#: src/pfm-read.c:573
+#: src/pfm-read.c:577
#, c-format
msgid "Bad missing values for %s."
msgstr ""
-#: src/pfm-read.c:591
+#: src/pfm-read.c:595
#, c-format
msgid "Weighting variable %s not present in dictionary."
msgstr ""
-#: src/pfm-read.c:638
+#: src/pfm-read.c:642
#, c-format
msgid "Unknown variable %s while parsing value labels."
msgstr ""
-#: src/pfm-read.c:641
+#: src/pfm-read.c:645
#, c-format
msgid ""
"Cannot assign value labels to %s and %s, which have different variable types "
"or widths."
msgstr ""
-#: src/pfm-read.c:665
+#: src/pfm-read.c:669
#, c-format
msgid "Duplicate label for value %g for variable %s."
msgstr ""
-#: src/pfm-read.c:668
+#: src/pfm-read.c:672
#, c-format
msgid "Duplicate label for value `%.*s' for variable %s."
msgstr ""
-#: src/pfm-write.c:93
+#: src/pfm-write.c:99
#, c-format
msgid ""
"An error occurred while opening \"%s\" for writing as a portable file: %s."
msgstr ""
-#: src/pfm-write.c:155
+#: src/pfm-write.c:161
#, c-format
msgid "%s: Writing portable file: %s."
msgstr ""
-#: src/pfm-write.c:493
+#: src/pfm-write.c:410
#, c-format
msgid "%s: Closing portable file: %s."
msgstr ""
-#: src/plot-hist.c:126
+#: src/plot-hist.c:127
msgid "HISTOGRAM"
msgstr ""
-#: src/plot-hist.c:128 src/frequencies.q:1139
-msgid "Frequency"
-msgstr ""
-
-#: src/postscript.c:326
+#: src/postscript.c:321
#, c-format
msgid "PostScript driver initializing as `%s'..."
msgstr ""
-#: src/postscript.c:450
+#: src/postscript.c:445
#, c-format
msgid ""
"PostScript driver: The defined page is not long enough to hold margins and "
"room for %d lines of each font at the default size of %d.%03d points."
msgstr ""
-#: src/postscript.c:580
+#: src/postscript.c:575
#, c-format
msgid "Unknown configuration parameter `%s' for PostScript device driver."
msgstr ""
-#: src/postscript.c:596
+#: src/postscript.c:591
#, c-format
msgid ""
"Unknown orientation `%s'. Valid orientations are `portrait' and `landscape'."
msgstr ""
-#: src/postscript.c:608
+#: src/postscript.c:603
msgid ""
"Unknown value for `data'. Valid values are `clean7bit', `clean8bit', and "
"`binary'."
msgstr ""
-#: src/postscript.c:617
+#: src/postscript.c:612
msgid "Unknown value for `line-ends'. Valid values are `lf' and `crlf'."
msgstr ""
-#: src/postscript.c:626
+#: src/postscript.c:621
msgid "Unknown value for `line-style'. Valid values are `thick' and `double'."
msgstr ""
-#: src/postscript.c:689
+#: src/postscript.c:684
#, c-format
msgid ""
"Default font size must be at least 1 point (value of 1000 for key `%s')."
msgstr ""
-#: src/postscript.c:721
+#: src/postscript.c:716
#, c-format
msgid "Value for `%s' must be a dimension of positive length (i.e., `1in')."
msgstr ""
-#: src/postscript.c:785
+#: src/postscript.c:780
#, c-format
msgid "Nonnegative integer required as value for `%s'."
msgstr ""
-#: src/postscript.c:911
+#: src/postscript.c:906
#, c-format
msgid "%s: %s: Opening PostScript font encoding..."
msgstr ""
-#: src/postscript.c:917
+#: src/postscript.c:912
#, c-format
msgid ""
"PostScript driver: Cannot open encoding file `%s': %s. Substituting "
"ISOLatin1Encoding for missing encoding."
msgstr ""
-#: src/postscript.c:959
+#: src/postscript.c:954
msgid "PostScript driver: Invalid numeric format."
msgstr ""
-#: src/postscript.c:964
+#: src/postscript.c:959
#, c-format
msgid ""
"PostScript driver: Codes must be between 0 and 255. (%d is not allowed.)"
msgstr ""
-#: src/postscript.c:1000
+#: src/postscript.c:995
#, c-format
msgid "PostScript driver: Error closing encoding file `%s'."
msgstr ""
-#: src/postscript.c:1003
+#: src/postscript.c:998
#, c-format
msgid "%s: PostScript font encoding read successfully."
msgstr ""
-#: src/postscript.c:1097
+#: src/postscript.c:1092
#, c-format
msgid "%s: %s: Opening PostScript encoding list file."
msgstr ""
-#: src/postscript.c:1130
+#: src/postscript.c:1125
#, c-format
msgid "%s: PostScript encoding list file read successfully."
msgstr ""
-#: src/postscript.c:1144
+#: src/postscript.c:1139
msgid "<<default encoding>>"
msgstr ""
-#: src/postscript.c:1302
+#: src/postscript.c:1297
msgid ""
"Cannot find PostScript prologue. The use of `-vv' on the command line is "
"suggested as a debugging aid."
msgstr ""
-#: src/postscript.c:1307
+#: src/postscript.c:1302
#, c-format
msgid "%s: %s: Opening PostScript prologue..."
msgstr ""
-#: src/postscript.c:1479
+#: src/postscript.c:1474
#, c-format
msgid "%s: PostScript prologue read successfully."
msgstr ""
-#: src/postscript.c:1483
+#: src/postscript.c:1478
#, c-format
msgid "%s: Error reading PostScript prologue."
msgstr ""
-#: src/postscript.c:1653
+#: src/postscript.c:1648
#, c-format
msgid "PostScript output driver: %s: %s"
msgstr ""
-#: src/postscript.c:2337
+#: src/postscript.c:2347
#, c-format
msgid "PostScript driver: Cannot find encoding `%s' for PostScript font `%s'."
msgstr ""
-#: src/postscript.c:2885
-msgid "Charts are currently unsupported with postscript drivers."
-msgstr ""
-
-#: src/print.c:365 src/print.c:382
+#: src/print.c:368 src/print.c:385
#, c-format
msgid "%g is not a valid column location."
msgstr ""
-#: src/print.c:376
+#: src/print.c:379
#, c-format
msgid "Column location expected following `%d-'."
msgstr ""
-#: src/print.c:387
+#: src/print.c:390
#, c-format
msgid ""
"%d-%ld is not a valid column range. The second column must be greater than "
"or equal to the first."
msgstr ""
-#: src/print.c:488
+#: src/print.c:491
#, c-format
msgid "Variable %s has width %d so it cannot be output as format %s."
msgstr ""
-#: src/print.c:508
+#: src/print.c:511
#, c-format
msgid ""
"%s is not of the same type as %s. To specify variables of different types "
"in the same variable list, use a FORTRAN-like format specifier."
msgstr ""
-#: src/print.c:538
+#: src/print.c:541
msgid ""
"The ending column for a field must not be less than the starting column."
msgstr ""
-#: src/print.c:686
+#: src/print.c:689
msgid ""
"The number of format specifications exceeds the number of variable names "
"given."
msgstr ""
-#: src/print.c:838
+#: src/print.c:841
#, c-format
msgid "Writing %d record(s) to file %s."
msgstr ""
-#: src/print.c:841
+#: src/print.c:844
#, c-format
msgid "Writing %d record(s) to the listing file."
msgstr ""
-#: src/print.c:1088
+#: src/print.c:1091
msgid "The expression on PRINT SPACE evaluated to the system-missing value."
msgstr ""
-#: src/print.c:1091
+#: src/print.c:1094
#, c-format
msgid "The expression on PRINT SPACE evaluated to %g."
msgstr ""
-#: src/recode.c:283
+#: src/rank.q:242
+#, c-format
+msgid "Variable %s already exists."
+msgstr ""
+
+#: src/rank.q:247
+msgid "Too many variables in INTO clause."
+msgstr ""
+
+#: src/recode.c:286
#, c-format
msgid ""
"%d variable(s) cannot be recoded into %d variable(s). Specify the same "
"number of variables as input and output variables."
msgstr ""
-#: src/recode.c:297
+#: src/recode.c:300
#, c-format
msgid ""
"There is no string variable named %s. (All string variables specified on "
"variable.)"
msgstr ""
-#: src/recode.c:306
+#: src/recode.c:309
#, c-format
msgid ""
"Type mismatch between input and output variables. Output variable %s is not "
"a string variable, but all the input variables are string variables."
msgstr ""
-#: src/recode.c:325
+#: src/recode.c:328
#, c-format
msgid "Type mismatch after INTO: %s is not a numeric variable."
msgstr ""
-#: src/recode.c:355
+#: src/recode.c:358
msgid ""
"INTO must be used when the input values are numeric and output values are "
"string."
msgstr ""
-#: src/recode.c:363
+#: src/recode.c:366
msgid ""
"INTO must be used when the input values are string and output values are "
"numeric."
msgstr ""
-#: src/recode.c:486
+#: src/recode.c:489
msgid "expecting output value"
msgstr ""
-#: src/recode.c:500
+#: src/recode.c:503
msgid ""
"Inconsistent output types. The output values must be all numeric or all "
"string."
msgstr ""
-#: src/recode.c:551
+#: src/recode.c:554
msgid "following LO THRU"
msgstr ""
-#: src/recode.c:567 src/recode.c:596
+#: src/recode.c:570 src/recode.c:599
msgid "in source value"
msgstr ""
-#: src/recode.c:609
+#: src/recode.c:612
msgid ""
"Keyword CONVERT may only be used with string input values and numeric output "
"values."
msgstr ""
-#: src/rename-vars.c:48
+#: src/rename-vars.c:51
msgid ""
"RENAME VARS may not be used after TEMPORARY. Temporary transformations will "
"be made permanent."
msgstr ""
-#: src/rename-vars.c:60
+#: src/rename-vars.c:63
msgid "`(' expected."
msgstr ""
-#: src/rename-vars.c:68
+#: src/rename-vars.c:71
msgid "`=' expected between lists of new and old variable names."
msgstr ""
-#: src/rename-vars.c:86
+#: src/rename-vars.c:89
msgid "`)' expected after variable names."
msgstr ""
-#: src/rename-vars.c:96
+#: src/rename-vars.c:99
#, c-format
msgid "Renaming would duplicate variable name %s."
msgstr ""
-#: src/repeat.c:151
+#: src/repeat.c:154
#, c-format
msgid "Identifier %s is given twice."
msgstr ""
-#: src/repeat.c:194
+#: src/repeat.c:197
#, c-format
msgid ""
"There must be the same number of substitutions for each dummy variable "
"s as well, but %d were specified."
msgstr ""
-#: src/repeat.c:299
+#: src/repeat.c:302
msgid "No commands in scope."
msgstr ""
-#: src/repeat.c:487
+#: src/repeat.c:490
msgid "No matching DO REPEAT."
msgstr ""
-#: src/sample.c:73
+#: src/sample.c:76
msgid "The sampling factor must be between 0 and 1 exclusive."
msgstr ""
-#: src/sample.c:93
+#: src/sample.c:96
#, c-format
msgid "Cannot sample %d observations from a population of %d."
msgstr ""
-#: src/sel-if.c:100
+#: src/sel-if.c:103
msgid "The filter variable must be numeric."
msgstr ""
-#: src/sel-if.c:106
+#: src/sel-if.c:109
msgid "The filter variable may not be scratch."
msgstr ""
-#: src/sel-if.c:137
+#: src/sel-if.c:140
msgid "Only last instance of this command is in effect."
msgstr ""
-#: src/sfm-read.c:129
-msgid "corrupt system file: "
-msgstr ""
-
-#: src/sfm-read.c:148 src/sfm-write.c:919
+#: src/set.q:224 src/set.q:303 src/set.q:346 src/set.q:401 src/set.q:403
+#: src/set.q:405 src/set.q:407 src/set.q:409 src/set.q:411 src/set.q:413
+#: src/set.q:415 src/set.q:417 src/set.q:419 src/set.q:421 src/set.q:423
+#: src/set.q:425 src/set.q:831 src/set.q:912 src/set.q:1007
#, c-format
-msgid "%s: Closing system file: %s."
+msgid "%s is obsolete."
msgstr ""
-#: src/sfm-read.c:234
-#, c-format
-msgid ""
-"An error occurred while opening \"%s\" for reading as a system file: %s."
+#: src/set.q:232
+msgid "LISTING is ON"
msgstr ""
-#: src/sfm-read.c:252
-#, c-format
-msgid ""
-"%s: Index of weighting variable (%d) is not between 0 and number of elements "
-"per case (%d)."
+#: src/set.q:234
+msgid "LISTING is OFF"
msgstr ""
-#: src/sfm-read.c:261
+#: src/set.q:248
#, c-format
-msgid ""
-"%s: Weighting variable may not be a continuation of a long string variable."
+msgid "EPOCH is %d"
msgstr ""
-#: src/sfm-read.c:264
-#, c-format
-msgid "%s: Weighting variable may not be a string variable."
+#: src/set.q:267
+msgid "Journalling is off"
msgstr ""
-#: src/sfm-read.c:289
-#, c-format
+#: src/set.q:434
msgid ""
-"%s: Orphaned variable index record (type 4). Type 4 records must always "
-"immediately follow type 3 records."
+"CASE is not implemented and probably won't be. If you care, complain about "
+"it."
msgstr ""
-#: src/sfm-read.c:347
-#, c-format
-msgid "%s: Invalid subrecord length. Record: 7; Subrecord: 11"
+#: src/set.q:439
+msgid "Active file compression is not yet implemented (and probably won't be)."
msgstr ""
-#: src/sfm-read.c:401
+#: src/set.q:453
#, c-format
-msgid "%s: Trailing garbage in long variable name map."
+msgid ""
+"CC%c: Length of custom currency string `%s' (%d) exceeds maximum length of "
+"16."
msgstr ""
-#: src/sfm-read.c:408
+#: src/set.q:475
#, c-format
-msgid "%s: Long variable mapping to invalid variable name `%s'."
+msgid ""
+"CC%c: Custom currency string `%s' does not contain exactly three periods or "
+"commas (not both)."
msgstr ""
-#: src/sfm-read.c:418
-#, c-format
-msgid "%s: Long variable mapping for nonexistent variable %s."
+#: src/set.q:528
+msgid "None"
msgstr ""
-#: src/sfm-read.c:428
-#, c-format
-msgid "%s: Duplicate long variable name `%s' within system file."
+#: src/set.q:534
+msgid "Disabled"
msgstr ""
-#: src/sfm-read.c:456
-#, c-format
-msgid "%s: Unrecognized record type 7, subtype %d encountered in system file."
+#: src/set.q:539
+msgid "Screen"
msgstr ""
-#: src/sfm-read.c:481
-#, c-format
-msgid "%s: Unrecognized record type %d."
+#: src/set.q:546
+msgid "Listing"
msgstr ""
-#: src/sfm-read.c:513
-#, c-format
-msgid ""
-"%s: Bad size (%d) or count (%d) field on record type 7, subtype 3.\tExpected "
-"size %d, count 8."
+#: src/set.q:553
+msgid "Other"
msgstr ""
-#: src/sfm-read.c:524
+#: src/set.q:662
+msgid "EPOCH must be 1500 or later."
+msgstr ""
+
+#: src/set.q:669
+msgid "expecting AUTOMATIC or year"
+msgstr ""
+
+#: src/set.q:690
+msgid "LENGTH must be at least 1."
+msgstr ""
+
+#: src/set.q:729
+msgid "Missing identifier in RESULTS subcommand."
+msgstr ""
+
+#: src/set.q:740
+msgid "Unrecognized identifier in RESULTS subcommand."
+msgstr ""
+
+#: src/set.q:777
+msgid "WIDTH must be at least 1."
+msgstr ""
+
+#: src/set.q:800
+#, c-format
+msgid ""
+"FORMAT requires numeric output format as an argument. Specified format %s "
+"is of type string."
+msgstr ""
+
+#: src/set.q:844
+msgid "Text color must be in range 0-15."
+msgstr ""
+
+#: src/set.q:857
+msgid "Background color must be in range 0-7."
+msgstr ""
+
+#: src/set.q:868
+msgid "Border color must be in range 0-7."
+msgstr ""
+
+#: src/set.q:924
+msgid "Lower window color must be between 0 and 6."
+msgstr ""
+
+#: src/set.q:938
+msgid "Upper window color must be between 0 and 6."
+msgstr ""
+
+#: src/set.q:950
+msgid "Frame color must be between 0 and 6."
+msgstr ""
+
+#: src/set.q:1016
+msgid "Drive letter expected in WORKDEV subcommand."
+msgstr ""
+
+#: src/set.q:1048
+msgid "Specify a terminal type with the TERM environment variable."
+msgstr ""
+
+#: src/set.q:1054
+msgid "Could not access the termcap data base."
+msgstr ""
+
+#: src/set.q:1056
+#, c-format
+msgid "Terminal type `%s' is not defined."
+msgstr ""
+
+#: src/set.q:1114
+msgid "data> "
+msgstr ""
+
+#: src/sfm-read.c:132
+msgid "corrupt system file: "
+msgstr ""
+
+#: src/sfm-read.c:151 src/sfm-write.c:922
+#, c-format
+msgid "%s: Closing system file: %s."
+msgstr ""
+
+#: src/sfm-read.c:237
+#, c-format
+msgid ""
+"An error occurred while opening \"%s\" for reading as a system file: %s."
+msgstr ""
+
+#: src/sfm-read.c:255
+#, c-format
+msgid ""
+"%s: Index of weighting variable (%d) is not between 0 and number of elements "
+"per case (%d)."
+msgstr ""
+
+#: src/sfm-read.c:264
+#, c-format
+msgid ""
+"%s: Weighting variable may not be a continuation of a long string variable."
+msgstr ""
+
+#: src/sfm-read.c:267
+#, c-format
+msgid "%s: Weighting variable may not be a string variable."
+msgstr ""
+
+#: src/sfm-read.c:292
+#, c-format
+msgid ""
+"%s: Orphaned variable index record (type 4). Type 4 records must always "
+"immediately follow type 3 records."
+msgstr ""
+
+#: src/sfm-read.c:350
+#, c-format
+msgid "%s: Invalid subrecord length. Record: 7; Subrecord: 11"
+msgstr ""
+
+#: src/sfm-read.c:404
+#, c-format
+msgid "%s: Trailing garbage in long variable name map."
+msgstr ""
+
+#: src/sfm-read.c:411
+#, c-format
+msgid "%s: Long variable mapping to invalid variable name `%s'."
+msgstr ""
+
+#: src/sfm-read.c:421
+#, c-format
+msgid "%s: Long variable mapping for nonexistent variable %s."
+msgstr ""
+
+#: src/sfm-read.c:431
+#, c-format
+msgid "%s: Duplicate long variable name `%s' within system file."
+msgstr ""
+
+#: src/sfm-read.c:459
+#, c-format
+msgid "%s: Unrecognized record type 7, subtype %d encountered in system file."
+msgstr ""
+
+#: src/sfm-read.c:484
+#, c-format
+msgid "%s: Unrecognized record type %d."
+msgstr ""
+
+#: src/sfm-read.c:516
+#, c-format
+msgid ""
+"%s: Bad size (%d) or count (%d) field on record type 7, subtype 3.\tExpected "
+"size %d, count 8."
+msgstr ""
+
+#: src/sfm-read.c:527
#, c-format
msgid ""
"%s: Floating-point representation in system file is not IEEE-754. PSPP "
"cannot convert between floating-point formats."
msgstr ""
-#: src/sfm-read.c:540
+#: src/sfm-read.c:543
#, c-format
msgid ""
"%s: File-indicated endianness (%s) does not match endianness intuited from "
"file header (%s)."
msgstr ""
-#: src/sfm-read.c:543 src/sfm-read.c:544
+#: src/sfm-read.c:546 src/sfm-read.c:547
msgid "big-endian"
msgstr ""
-#: src/sfm-read.c:543 src/sfm-read.c:544
+#: src/sfm-read.c:546 src/sfm-read.c:547
msgid "little-endian"
msgstr ""
-#: src/sfm-read.c:545
+#: src/sfm-read.c:548
msgid "unknown"
msgstr ""
-#: src/sfm-read.c:549
+#: src/sfm-read.c:552
#, c-format
msgid "%s: File-indicated character representation code (%s) is not ASCII."
msgstr ""
-#: src/sfm-read.c:553
+#: src/sfm-read.c:556
msgid "DEC Kanji"
msgstr ""
-#: src/sfm-read.c:553 src/sysfile-info.c:115
+#: src/sfm-read.c:556 src/sysfile-info.c:118
msgid "Unknown"
msgstr ""
-#: src/sfm-read.c:569
+#: src/sfm-read.c:572
#, c-format
msgid ""
"%s: Bad size (%d) or count (%d) field on record type 7, subtype 4.\tExpected "
"size %d, count 8."
msgstr ""
-#: src/sfm-read.c:584
+#: src/sfm-read.c:587
#, c-format
msgid ""
"%s: File-indicated value is different from internal value for at least one "
"%g; LOWEST: %g, %g."
msgstr ""
-#: src/sfm-read.c:611
+#: src/sfm-read.c:614
#, c-format
msgid ""
"%s: Bad magic. Proper system files begin with the four characters `$FL2'. "
"This file will not be read."
msgstr ""
-#: src/sfm-read.c:653
+#: src/sfm-read.c:656
#, c-format
msgid ""
"%s: File layout code has unexpected value %d. Value should be 2, in big-"
"endian or little-endian format."
msgstr ""
-#: src/sfm-read.c:681
+#: src/sfm-read.c:684
#, c-format
msgid "%s: Number of cases in file (%ld) is not between -1 and %d."
msgstr ""
-#: src/sfm-read.c:686
+#: src/sfm-read.c:689
#, c-format
msgid "%s: Compression bias (%g) is not the usual value of 100."
msgstr ""
-#: src/sfm-read.c:809
+#: src/sfm-read.c:812
#, c-format
msgid ""
"%s: position %d: String variable does not have proper number of continuation "
"records."
msgstr ""
-#: src/sfm-read.c:820
+#: src/sfm-read.c:823
#, c-format
msgid "%s: position %d: Superfluous long string continuation record."
msgstr ""
-#: src/sfm-read.c:826
+#: src/sfm-read.c:829
#, c-format
msgid "%s: position %d: Bad variable type code %d."
msgstr ""
-#: src/sfm-read.c:829
+#: src/sfm-read.c:832
#, c-format
msgid "%s: position %d: Variable label indicator field is not 0 or 1."
msgstr ""
-#: src/sfm-read.c:833
+#: src/sfm-read.c:836
#, c-format
msgid ""
"%s: position %d: Missing value indicator field is not -3, -2, 0, 1, 2, or 3."
msgstr ""
-#: src/sfm-read.c:839
+#: src/sfm-read.c:842
#, c-format
msgid "%s: position %d: Variable name begins with invalid character."
msgstr ""
-#: src/sfm-read.c:843
+#: src/sfm-read.c:846
#, c-format
msgid "%s: position %d: Variable name begins with lowercase letter %c."
msgstr ""
-#: src/sfm-read.c:847
+#: src/sfm-read.c:850
#, c-format
msgid ""
"%s: position %d: Variable name begins with octothorpe (`#'). Scratch "
"variables should not appear in system files."
msgstr ""
-#: src/sfm-read.c:862
+#: src/sfm-read.c:865
#, c-format
msgid "%s: position %d: Variable name character %d is lowercase letter %c."
msgstr ""
-#: src/sfm-read.c:871
+#: src/sfm-read.c:874
#, c-format
msgid ""
"%s: position %d: character `\\%03o' (%c) is not valid in a variable name."
msgstr ""
-#: src/sfm-read.c:878
+#: src/sfm-read.c:881
#, c-format
msgid "%s: Invalid variable name `%s' within system file."
msgstr ""
-#: src/sfm-read.c:885
+#: src/sfm-read.c:888
#, c-format
msgid "%s: Duplicate variable name `%s' within system file."
msgstr ""
-#: src/sfm-read.c:908
+#: src/sfm-read.c:911
#, c-format
msgid "%s: Variable %s indicates variable label of invalid length %d."
msgstr ""
-#: src/sfm-read.c:928
+#: src/sfm-read.c:931
#, c-format
msgid "%s: Long string variable %s may not have missing values."
msgstr ""
-#: src/sfm-read.c:953
+#: src/sfm-read.c:956
#, c-format
msgid ""
"%s: String variable %s may not have missing values specified as a range."
msgstr ""
-#: src/sfm-read.c:995
+#: src/sfm-read.c:998
#, c-format
msgid "%s: Long string continuation records omitted at end of dictionary."
msgstr ""
-#: src/sfm-read.c:1000
+#: src/sfm-read.c:1003
#, c-format
msgid ""
"%s: System file header indicates %d variable positions but %d were read from "
"file."
msgstr ""
-#: src/sfm-read.c:1025
+#: src/sfm-read.c:1028
#, c-format
msgid "%s: %s variable %s has %s format specifier %s."
msgstr ""
-#: src/sfm-read.c:1078
+#: src/sfm-read.c:1081
#, c-format
msgid "%s: Invalid number of labels: %d. Ignoring labels."
msgstr ""
-#: src/sfm-read.c:1120
+#: src/sfm-read.c:1123
#, c-format
msgid ""
"%s: Variable index record (type 4) does not immediately follow value label "
"record (type 3) as it should."
msgstr ""
-#: src/sfm-read.c:1131
+#: src/sfm-read.c:1134
#, c-format
msgid ""
"%s: Number of variables associated with a value label (%d) is not between 1 "
"and the number of variables (%d)."
msgstr ""
-#: src/sfm-read.c:1147
+#: src/sfm-read.c:1150
#, c-format
msgid ""
"%s: Variable index associated with value label (%d) is not between 1 and the "
"number of values (%d)."
msgstr ""
-#: src/sfm-read.c:1154
+#: src/sfm-read.c:1157
#, c-format
msgid ""
"%s: Variable index associated with value label (%d) refers to a continuation "
"of a string variable, not to an actual variable."
msgstr ""
-#: src/sfm-read.c:1159
+#: src/sfm-read.c:1162
#, c-format
msgid "%s: Value labels are not allowed on long string variables (%s)."
msgstr ""
-#: src/sfm-read.c:1170
+#: src/sfm-read.c:1173
#, c-format
msgid ""
"%s: Variables associated with value label are not all of identical type. "
"Variable %s has %s type, but variable %s has %s type."
msgstr ""
-#: src/sfm-read.c:1211
+#: src/sfm-read.c:1214
#, c-format
msgid "%s: File contains duplicate label for value %g for variable %s."
msgstr ""
-#: src/sfm-read.c:1215
+#: src/sfm-read.c:1218
#, c-format
msgid "%s: File contains duplicate label for value `%.*s' for variable %s."
msgstr ""
-#: src/sfm-read.c:1257 src/sfm-read.c:1534
+#: src/sfm-read.c:1260 src/sfm-read.c:1537
#, c-format
msgid "%s: Reading system file: %s."
msgstr ""
-#: src/sfm-read.c:1260 src/sfm-read.c:1375 src/sfm-read.c:1417
+#: src/sfm-read.c:1263 src/sfm-read.c:1378 src/sfm-read.c:1420
#, c-format
msgid "%s: Unexpected end of file."
msgstr ""
-#: src/sfm-read.c:1275
+#: src/sfm-read.c:1278
#, c-format
msgid "%s: Seeking system file: %s."
msgstr ""
-#: src/sfm-read.c:1290
+#: src/sfm-read.c:1293
#, c-format
msgid "%s: System file contains multiple type 6 (document) records."
msgstr ""
-#: src/sfm-read.c:1296
+#: src/sfm-read.c:1299
#, c-format
msgid "%s: Number of document lines (%ld) must be greater than 0."
msgstr ""
-#: src/sfm-read.c:1328
+#: src/sfm-read.c:1331
#, c-format
msgid "%s: Error reading file: %s."
msgstr ""
-#: src/sfm-read.c:1365
+#: src/sfm-read.c:1368
#, c-format
msgid "%s: Compressed data is corrupted. Data ends in partial case."
msgstr ""
-#: src/sfm-read.c:1537
+#: src/sfm-read.c:1540
#, c-format
msgid "%s: Partial record at end of system file."
msgstr ""
-#: src/sfm-write.c:154
+#: src/sfm-write.c:157
#, c-format
msgid "Error opening \"%s\" for writing as a system file: %s."
msgstr ""
-#: src/sfm-write.c:739
+#: src/sfm-write.c:742
#, c-format
msgid "%s: Writing system file: %s."
msgstr ""
-#: src/sort.c:82
+#: src/sort-prs.c:94
+msgid "`A' or `D' expected inside parentheses."
+msgstr ""
+
+#: src/sort-prs.c:99
+msgid "`)' expected."
+msgstr ""
+
+#: src/sort.c:85
msgid "Buffer limit must be at least 2."
msgstr ""
-#: src/sort.c:458
+#: src/sort.c:461
#, c-format
msgid ""
"Out of memory. Could not allocate room for minimum of %d cases of %d bytes "
"each. (PSPP workspace is currently restricted to a maximum of %d KB.)"
msgstr ""
-#: src/sysfile-info.c:96
+#: src/sysfile-info.c:99
msgid "File:"
msgstr ""
-#: src/sysfile-info.c:98
+#: src/sysfile-info.c:101
msgid "Label:"
msgstr ""
-#: src/sysfile-info.c:102
+#: src/sysfile-info.c:105
msgid "No label."
msgstr ""
-#: src/sysfile-info.c:105
+#: src/sysfile-info.c:108
msgid "Created:"
msgstr ""
-#: src/sysfile-info.c:108
+#: src/sysfile-info.c:111
msgid "Endian:"
msgstr ""
-#: src/sysfile-info.c:109
+#: src/sysfile-info.c:112
msgid "Big."
msgstr ""
-#: src/sysfile-info.c:109
+#: src/sysfile-info.c:112
msgid "Little."
msgstr ""
-#: src/sysfile-info.c:110
+#: src/sysfile-info.c:113
msgid "Variables:"
msgstr ""
-#: src/sysfile-info.c:113
+#: src/sysfile-info.c:116
msgid "Cases:"
msgstr ""
-#: src/sysfile-info.c:116
+#: src/sysfile-info.c:119
msgid "Type:"
msgstr ""
-#: src/sysfile-info.c:117
+#: src/sysfile-info.c:120
msgid "System File."
msgstr ""
-#: src/sysfile-info.c:118
+#: src/sysfile-info.c:121
msgid "Weight:"
msgstr ""
-#: src/sysfile-info.c:122
+#: src/sysfile-info.c:125
msgid "Not weighted."
msgstr ""
-#: src/sysfile-info.c:124
+#: src/sysfile-info.c:127
msgid "Mode:"
msgstr ""
-#: src/sysfile-info.c:126
+#: src/sysfile-info.c:129
#, c-format
msgid "Compression %s."
msgstr ""
-#: src/sysfile-info.c:126
+#: src/sysfile-info.c:129
msgid "on"
msgstr ""
-#: src/sysfile-info.c:126
+#: src/sysfile-info.c:129
msgid "off"
msgstr ""
-#: src/sysfile-info.c:136 src/sysfile-info.c:374
+#: src/sysfile-info.c:139 src/sysfile-info.c:377
msgid "Description"
msgstr ""
-#: src/sysfile-info.c:137 src/sysfile-info.c:372
+#: src/sysfile-info.c:140 src/sysfile-info.c:375
msgid "Position"
msgstr ""
-#: src/sysfile-info.c:195
+#: src/sysfile-info.c:198
msgid "The active file does not have a file label."
msgstr ""
-#: src/sysfile-info.c:198
+#: src/sysfile-info.c:201
msgid "File label:"
msgstr ""
-#: src/sysfile-info.c:260
+#: src/sysfile-info.c:263
msgid "No variables to display."
msgstr ""
-#: src/sysfile-info.c:279
+#: src/sysfile-info.c:282
msgid "Macros not supported."
msgstr ""
-#: src/sysfile-info.c:289
+#: src/sysfile-info.c:292
msgid "The active file dictionary does not contain any documents."
msgstr ""
-#: src/sysfile-info.c:298
+#: src/sysfile-info.c:301
msgid "Documents in the active file:"
msgstr ""
-#: src/sysfile-info.c:376 src/sysfile-info.c:534 src/vfm.c:811
+#: src/sysfile-info.c:379 src/sysfile-info.c:537 src/vfm.c:812
msgid "Label"
msgstr ""
-#: src/sysfile-info.c:448
+#: src/sysfile-info.c:451
#, c-format
msgid "Format: %s"
msgstr ""
-#: src/sysfile-info.c:455
+#: src/sysfile-info.c:458
#, c-format
msgid "Print Format: %s"
msgstr ""
-#: src/sysfile-info.c:458
+#: src/sysfile-info.c:461
#, c-format
msgid "Write Format: %s"
msgstr ""
-#: src/sysfile-info.c:466
+#: src/sysfile-info.c:469
msgid "Missing Values: "
msgstr ""
-#: src/sysfile-info.c:533 src/vfm.c:810 src/crosstabs.q:1099
-#: src/crosstabs.q:1126 src/crosstabs.q:1146 src/crosstabs.q:1168
-#: src/examine.q:1130 src/frequencies.q:1138 src/frequencies.q:1259
-msgid "Value"
-msgstr ""
-
-#: src/sysfile-info.c:590
+#: src/sysfile-info.c:593
msgid "No vectors defined."
msgstr ""
-#: src/sysfile-info.c:605
+#: src/sysfile-info.c:608
msgid "Vector"
msgstr ""
-#: src/tab.c:254
+#: src/t-test.q:269
+msgid "TESTVAL, GROUPS and PAIRS subcommands are mutually exclusive."
+msgstr ""
+
+#: src/t-test.q:287
+msgid "VARIABLES subcommand is not appropriate with PAIRS"
+msgstr ""
+
+#: src/t-test.q:325
+msgid "One or more VARIABLES must be specified."
+msgstr ""
+
+#: src/t-test.q:376
+#, c-format
+msgid "Long string variable %s is not valid here."
+msgstr ""
+
+#: src/t-test.q:396 src/t-test.q:411
+msgid ""
+"When applying GROUPS to a string variable, two values must be specified."
+msgstr ""
+
+#: src/t-test.q:483
+#, c-format
+msgid ""
+"PAIRED was specified but the number of variables preceding WITH (%d) did not "
+"match the number following (%d)."
+msgstr ""
+
+#: src/t-test.q:500
+msgid "At least two variables must be specified on PAIRS."
+msgstr ""
+
+#: src/t-test.q:677
+msgid "One-Sample Statistics"
+msgstr ""
+
+#: src/t-test.q:682 src/t-test.q:705 src/t-test.q:829
+msgid "SE. Mean"
+msgstr ""
+
+#: src/t-test.q:699
+msgid "Group Statistics"
+msgstr ""
+
+#: src/t-test.q:823
+msgid "Paired Sample Statistics"
+msgstr ""
+
+#: src/t-test.q:845 src/t-test.q:1189 src/t-test.q:1379
+#, c-format
+msgid "Pair %d"
+msgstr ""
+
+#: src/t-test.q:962
+msgid "Independent Samples Test"
+msgstr ""
+
+#: src/t-test.q:970
+msgid "Levene's Test for Equality of Variances"
+msgstr ""
+
+#: src/t-test.q:972
+msgid "t-test for Equality of Means"
+msgstr ""
+
+#: src/t-test.q:975 src/t-test.q:1364
+msgid "Sig."
+msgstr ""
+
+#: src/t-test.q:979 src/t-test.q:1263
+msgid "Mean Difference"
+msgstr ""
+
+#: src/t-test.q:980
+msgid "Std. Error Difference"
+msgstr ""
+
+#: src/t-test.q:985 src/t-test.q:1160 src/t-test.q:1255
+#, c-format
+msgid "%g%% Confidence Interval of the Difference"
+msgstr ""
+
+#: src/t-test.q:1040
+msgid "Equal variances assumed"
+msgstr ""
+
+#: src/t-test.q:1092
+msgid "Equal variances not assumed"
+msgstr ""
+
+#: src/t-test.q:1150
+msgid "Paired Samples Test"
+msgstr ""
+
+#: src/t-test.q:1153
+msgid "Paired Differences"
+msgstr ""
+
+#: src/t-test.q:1165
+msgid "Std. Error Mean"
+msgstr ""
+
+#: src/t-test.q:1244
+msgid "One-Sample Test"
+msgstr ""
+
+#: src/t-test.q:1249
+#, c-format
+msgid "Test Value = %f"
+msgstr ""
+
+#: src/t-test.q:1359
+msgid "Paired Samples Correlations"
+msgstr ""
+
+#: src/t-test.q:1363
+msgid "Correlation"
+msgstr ""
+
+#: src/t-test.q:1382
+#, c-format
+msgid "%s & %s"
+msgstr ""
+
+#: src/tab.c:257
#, c-format
msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
msgstr ""
-#: src/tab.c:329
+#: src/tab.c:332
#, c-format
msgid ""
"bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
msgstr ""
-#: src/temporary.c:46
+#: src/temporary.c:49
msgid "This command is not valid inside DO IF or LOOP."
msgstr ""
-#: src/temporary.c:53
+#: src/temporary.c:56
msgid ""
"This command may only appear once between procedures and procedure-like "
"commands."
msgstr ""
-#: src/title.c:56
+#: src/title.c:59
#, c-format
msgid "%s before: %s\n"
msgstr ""
-#: src/title.c:56
+#: src/title.c:59
msgid "<none>"
msgstr ""
-#: src/title.c:68
+#: src/title.c:71
#, c-format
msgid "%s: `.' expected after string."
msgstr ""
-#: src/title.c:84
+#: src/title.c:87
#, c-format
msgid "%s after: %s\n"
msgstr ""
-#: src/title.c:140
+#: src/title.c:143
#, c-format
msgid "Document entered %s %02d:%02d:%02d by %s (%s):"
msgstr ""
-#: src/val-labs.c:118
+#: src/val-labs.c:121
#, c-format
msgid ""
"It is not possible to assign value labels to long string variables such as %"
"s."
msgstr ""
-#: src/val-labs.c:167
+#: src/val-labs.c:170
#, c-format
msgid "Value label `%g' is not integer."
msgstr ""
-#: src/val-labs.c:177
+#: src/val-labs.c:180
msgid "Truncating value label to 60 characters."
msgstr ""
-#: src/var-labs.c:47
+#: src/var-labs.c:50
msgid "String expected for variable label."
msgstr ""
-#: src/var-labs.c:53
+#: src/var-labs.c:56
msgid "Truncating variable label to 255 characters."
msgstr ""
-#: src/vars-atr.c:259
+#: src/vars-atr.c:262
msgid "Variable name cannot be empty string."
msgstr ""
-#: src/vars-atr.c:265
+#: src/vars-atr.c:268
#, c-format
msgid "Variable name %s exceeds %d-character limit."
msgstr ""
-#: src/vars-atr.c:274
+#: src/vars-atr.c:277
#, c-format
msgid "Character `%c' (in %s) may not appear in a variable name."
msgstr ""
-#: src/vars-atr.c:283
+#: src/vars-atr.c:286
#, c-format
msgid ""
"Character `%c' (in %s), may not appear as the first character in a variable "
"name."
msgstr ""
-#: src/vars-atr.c:291
+#: src/vars-atr.c:295
#, c-format
msgid "%s may not be used as a variable name because it is a reserved word."
msgstr ""
-#: src/vars-atr.c:386
+#: src/vars-atr.c:390
msgid "Variable suffix too large."
msgstr ""
-#: src/vars-prs.c:43
+#: src/vars-prs.c:46
msgid "expecting variable name"
msgstr ""
-#: src/vars-prs.c:49
+#: src/vars-prs.c:52
#, c-format
msgid "%s is not a variable name."
msgstr ""
-#: src/vars-prs.c:111
+#: src/vars-prs.c:114
msgid "ordinary"
msgstr ""
-#: src/vars-prs.c:113
+#: src/vars-prs.c:116
msgid "system"
msgstr ""
-#: src/vars-prs.c:115
+#: src/vars-prs.c:118
msgid "scratch"
msgstr ""
-#: src/vars-prs.c:174
+#: src/vars-prs.c:177
#, c-format
msgid ""
"%s is not a numeric variable. It will not be included in the variable list."
msgstr ""
-#: src/vars-prs.c:177
+#: src/vars-prs.c:180
#, c-format
msgid ""
"%s is not a string variable. It will not be included in the variable list."
msgstr ""
-#: src/vars-prs.c:181
+#: src/vars-prs.c:184
#, c-format
msgid "Scratch variables (such as %s) are not allowed here."
msgstr ""
-#: src/vars-prs.c:184
+#: src/vars-prs.c:187
#, c-format
msgid ""
"%s and %s are not the same type. All variables in this variable list must "
"be of the same type. %s will be omitted from list."
msgstr ""
-#: src/vars-prs.c:189
+#: src/vars-prs.c:192
#, c-format
msgid "Variable %s appears twice in variable list."
msgstr ""
-#: src/vars-prs.c:299
+#: src/vars-prs.c:302
#, c-format
msgid "%s TO %s is not valid syntax since %s precedes %s in the dictionary."
msgstr ""
-#: src/vars-prs.c:308
+#: src/vars-prs.c:311
#, c-format
msgid ""
"When using the TO keyword to specify several variables, both variables must "
"system variables. %s is a %s variable, whereas %s is %s."
msgstr ""
-#: src/vars-prs.c:379
+#: src/vars-prs.c:382
msgid "incorrect use of TO convention"
msgstr ""
-#: src/vars-prs.c:422
+#: src/vars-prs.c:425
msgid "Scratch variables not allowed here."
msgstr ""
-#: src/vars-prs.c:444
+#: src/vars-prs.c:447
msgid "Prefixes don't match in use of TO convention."
msgstr ""
-#: src/vars-prs.c:449
+#: src/vars-prs.c:452
msgid "Bad bounds in use of TO convention."
msgstr ""
-#: src/vector.c:67
+#: src/vector.c:70
#, c-format
msgid "Vector name %s is given twice."
msgstr ""
-#: src/vector.c:73
+#: src/vector.c:76
#, c-format
msgid "There is already a vector with name %s."
msgstr ""
-#: src/vector.c:94
+#: src/vector.c:97
msgid ""
"A slash must be used to separate each vector specification when using the "
"long form. Commands such as VECTOR A,B=Q1 TO Q20 are not supported."
msgstr ""
-#: src/vector.c:128
+#: src/vector.c:131
msgid "Vectors must have at least one element."
msgstr ""
-#: src/vector.c:142
+#: src/vector.c:145
#, c-format
msgid "%s%d is too long for a variable name."
msgstr ""
-#: src/vector.c:181
+#: src/vector.c:184
msgid ""
"The syntax for this command does not match the expected syntax for either "
"the long form or the short form of VECTOR."
msgstr ""
-#: src/weight.c:53
+#: src/weight.c:56
msgid "The weighting variable must be numeric."
msgstr ""
-#: src/weight.c:58
+#: src/weight.c:61
msgid "The weighting variable may not be scratch."
msgstr ""
-
-#: src/crosstabs.q:261
-msgid ""
-"Missing mode REPORT not allowed in general mode. Assuming MISSING=TABLE."
-msgstr ""
-
-#: src/crosstabs.q:271
-msgid "Write mode ALL not allowed in general mode. Assuming WRITE=CELLS."
-msgstr ""
-
-#: src/crosstabs.q:332
-msgid "expecting BY"
-msgstr ""
-
-#: src/crosstabs.q:399
-msgid "VARIABLES must be specified before TABLES."
-msgstr ""
-
-#: src/crosstabs.q:436
-#, c-format
-msgid "Maximum value (%ld) less than minimum value (%ld)."
-msgstr ""
-
-#: src/crosstabs.q:800
-msgid "Summary."
-msgstr ""
-
-#: src/crosstabs.q:802 src/examine.q:915
-msgid "Cases"
-msgstr ""
-
-#: src/crosstabs.q:803 src/examine.q:849 src/frequencies.q:1136
-#: src/frequencies.q:1509
-msgid "Valid"
-msgstr ""
-
-#: src/crosstabs.q:804 src/examine.q:850 src/frequencies.q:1204
-#: src/frequencies.q:1510
-msgid "Missing"
-msgstr ""
-
-#: src/crosstabs.q:805 src/crosstabs.q:1008 src/crosstabs.q:1722
-#: src/examine.q:851 src/frequencies.q:1213 src/oneway.q:307 src/oneway.q:470
-msgid "Total"
-msgstr ""
-
-#: src/crosstabs.q:815 src/examine.q:927 src/frequencies.q:1508
-#: src/oneway.q:393 src/t-test.q:675 src/t-test.q:698 src/t-test.q:823
-#: src/t-test.q:1358
-msgid "N"
-msgstr ""
-
-#: src/crosstabs.q:816 src/examine.q:930 src/frequencies.q:1140
-#: src/frequencies.q:1141 src/frequencies.q:1142
-msgid "Percent"
-msgstr ""
-
-#: src/crosstabs.q:1058
-msgid "count"
-msgstr ""
-
-#: src/crosstabs.q:1059
-msgid "row %"
-msgstr ""
-
-#: src/crosstabs.q:1060
-msgid "column %"
-msgstr ""
-
-#: src/crosstabs.q:1061
-msgid "total %"
-msgstr ""
-
-#: src/crosstabs.q:1062
-msgid "expected"
-msgstr ""
-
-#: src/crosstabs.q:1063
-msgid "residual"
-msgstr ""
-
-#: src/crosstabs.q:1064
-msgid "std. resid."
-msgstr ""
-
-#: src/crosstabs.q:1065
-msgid "adj. resid."
-msgstr ""
-
-#: src/crosstabs.q:1098 src/crosstabs.q:1125 src/crosstabs.q:1145
-#: src/crosstabs.q:1166 src/examine.q:1361
-msgid "Statistic"
-msgstr ""
-
-#: src/crosstabs.q:1100 src/oneway.q:280 src/oneway.q:682 src/t-test.q:973
-#: src/t-test.q:1165 src/t-test.q:1257
-msgid "df"
-msgstr ""
-
-#: src/crosstabs.q:1102
-msgid "Asymp. Sig. (2-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1104
-msgid "Exact. Sig. (2-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1106
-msgid "Exact. Sig. (1-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1124 src/crosstabs.q:1165
-msgid "Category"
-msgstr ""
-
-#: src/crosstabs.q:1127 src/crosstabs.q:1169
-msgid "Asymp. Std. Error"
-msgstr ""
-
-#: src/crosstabs.q:1128 src/crosstabs.q:1170
-msgid "Approx. T"
-msgstr ""
-
-#: src/crosstabs.q:1129 src/crosstabs.q:1171
-msgid "Approx. Sig."
-msgstr ""
-
-#: src/crosstabs.q:1144
-#, c-format
-msgid " 95%% Confidence Interval"
-msgstr ""
-
-#: src/crosstabs.q:1147 src/t-test.q:977 src/t-test.q:1162 src/t-test.q:1260
-msgid "Lower"
-msgstr ""
-
-#: src/crosstabs.q:1148 src/t-test.q:978 src/t-test.q:1163 src/t-test.q:1261
-msgid "Upper"
-msgstr ""
-
-#: src/crosstabs.q:1167
-msgid "Type"
-msgstr ""
-
-#: src/crosstabs.q:1916
-msgid "Pearson Chi-Square"
-msgstr ""
-
-#: src/crosstabs.q:1917
-msgid "Likelihood Ratio"
-msgstr ""
-
-#: src/crosstabs.q:1918
-msgid "Fisher's Exact Test"
-msgstr ""
-
-#: src/crosstabs.q:1919
-msgid "Continuity Correction"
-msgstr ""
-
-#: src/crosstabs.q:1920
-msgid "Linear-by-Linear Association"
-msgstr ""
-
-#: src/crosstabs.q:1957 src/crosstabs.q:2027 src/crosstabs.q:2086
-msgid "N of Valid Cases"
-msgstr ""
-
-#: src/crosstabs.q:1973 src/crosstabs.q:2102
-msgid "Nominal by Nominal"
-msgstr ""
-
-#: src/crosstabs.q:1974 src/crosstabs.q:2103
-msgid "Ordinal by Ordinal"
-msgstr ""
-
-#: src/crosstabs.q:1975
-msgid "Interval by Interval"
-msgstr ""
-
-#: src/crosstabs.q:1976
-msgid "Measure of Agreement"
-msgstr ""
-
-#: src/crosstabs.q:1981
-msgid "Phi"
-msgstr ""
-
-#: src/crosstabs.q:1982
-msgid "Cramer's V"
-msgstr ""
-
-#: src/crosstabs.q:1983
-msgid "Contingency Coefficient"
-msgstr ""
-
-#: src/crosstabs.q:1984
-msgid "Kendall's tau-b"
-msgstr ""
-
-#: src/crosstabs.q:1985
-msgid "Kendall's tau-c"
-msgstr ""
-
-#: src/crosstabs.q:1986
-msgid "Gamma"
-msgstr ""
-
-#: src/crosstabs.q:1987
-msgid "Spearman Correlation"
-msgstr ""
-
-#: src/crosstabs.q:1988
-msgid "Pearson's R"
-msgstr ""
-
-#: src/crosstabs.q:1989
-msgid "Kappa"
-msgstr ""
-
-#: src/crosstabs.q:2059
-#, c-format
-msgid "Odds Ratio for %s (%g / %g)"
-msgstr ""
-
-#: src/crosstabs.q:2062
-#, c-format
-msgid "Odds Ratio for %s (%.*s / %.*s)"
-msgstr ""
-
-#: src/crosstabs.q:2070
-#, c-format
-msgid "For cohort %s = %g"
-msgstr ""
-
-#: src/crosstabs.q:2073
-#, c-format
-msgid "For cohort %s = %.*s"
-msgstr ""
-
-#: src/crosstabs.q:2104
-msgid "Nominal by Interval"
-msgstr ""
-
-#: src/crosstabs.q:2109
-msgid "Lambda"
-msgstr ""
-
-#: src/crosstabs.q:2110
-msgid "Goodman and Kruskal tau"
-msgstr ""
-
-#: src/crosstabs.q:2111
-msgid "Uncertainty Coefficient"
-msgstr ""
-
-#: src/crosstabs.q:2112
-msgid "Somers' d"
-msgstr ""
-
-#: src/crosstabs.q:2113
-msgid "Eta"
-msgstr ""
-
-#: src/crosstabs.q:2118
-msgid "Symmetric"
-msgstr ""
-
-#: src/crosstabs.q:2119 src/crosstabs.q:2120
-#, c-format
-msgid "%s Dependent"
-msgstr ""
-
-#: src/examine.q:467 src/examine.q:479
-#, c-format
-msgid "%s and %s are mutually exclusive"
-msgstr ""
-
-#: src/examine.q:909
-msgid "Case Processing Summary"
-msgstr ""
-
-#: src/examine.q:1115
-msgid "Extreme Values"
-msgstr ""
-
-#: src/examine.q:1131
-msgid "Case Number"
-msgstr ""
-
-#: src/examine.q:1216
-msgid "Highest"
-msgstr ""
-
-#: src/examine.q:1221
-msgid "Lowest"
-msgstr ""
-
-#: src/examine.q:1362 src/oneway.q:396 src/oneway.q:680
-msgid "Std. Error"
-msgstr ""
-
-#: src/examine.q:1364 src/oneway.q:410
-msgid "Descriptives"
-msgstr ""
-
-#: src/examine.q:1484 src/oneway.q:401
-#, c-format
-msgid "%g%% Confidence Interval for Mean"
-msgstr ""
-
-#: src/examine.q:1490 src/oneway.q:403
-msgid "Lower Bound"
-msgstr ""
-
-#: src/examine.q:1501 src/oneway.q:404
-msgid "Upper Bound"
-msgstr ""
-
-#: src/examine.q:1513
-#, c-format
-msgid "5%% Trimmed Mean"
-msgstr ""
-
-#: src/examine.q:1524 src/frequencies.q:114
-msgid "Median"
-msgstr ""
-
-#: src/examine.q:1558 src/oneway.q:395 src/t-test.q:677 src/t-test.q:700
-#: src/t-test.q:824 src/t-test.q:1160
-msgid "Std. Deviation"
-msgstr ""
-
-#: src/examine.q:1606
-msgid "Interquartile Range"
-msgstr ""
-
-#: src/examine.q:1758
-#, c-format
-msgid "Boxplot of %s vs. %s"
-msgstr ""
-
-#: src/examine.q:1783
-msgid "Boxplot"
-msgstr ""
-
-#: src/examine.q:1825
-#, c-format
-msgid "Normal Q-Q Plot of %s"
-msgstr ""
-
-#: src/examine.q:1826 src/examine.q:1832
-msgid "Observed Value"
-msgstr ""
-
-#: src/examine.q:1827
-msgid "Expected Normal"
-msgstr ""
-
-#: src/examine.q:1830
-#, c-format
-msgid "Detrended Normal Q-Q Plot of %s"
-msgstr ""
-
-#: src/examine.q:1833
-msgid "Dev from Normal"
-msgstr ""
-
-#: src/examine.q:1952 src/examine.q:1974 src/frequencies.q:1520
-msgid "Percentiles"
-msgstr ""
-
-#: src/examine.q:2099
-msgid "Tukey's Hinges"
-msgstr ""
-
-#: src/file-handle.q:124
-#, c-format
-msgid ""
-"File handle %s already refers to file %s. File handles cannot be redefined "
-"within a session."
-msgstr ""
-
-#: src/file-handle.q:145
-msgid "The FILE HANDLE required subcommand NAME is not present."
-msgstr ""
-
-#: src/file-handle.q:164
-msgid ""
-"Fixed-length records were specified on /RECFORM, but record length was not "
-"specified on /LRECL. Assuming 1024-character records."
-msgstr ""
-
-#: src/file-handle.q:171
-#, c-format
-msgid ""
-"Record length (%ld) must be at least one byte. 1-character records will be "
-"assumed."
-msgstr ""
-
-#: src/file-handle.q:271
-#, c-format
-msgid "Can't open %s as a %s because it is already open as a %s"
-msgstr ""
-
-#: src/file-handle.q:278
-#, c-format
-msgid "Can't open %s as a %s for %s because it is already open for %s"
-msgstr ""
-
-#: src/file-handle.q:286
-#, c-format
-msgid "Can't re-open %s as a %s for %s"
-msgstr ""
-
-#: src/file-handle.q:339
-msgid "expecting a file name or handle name"
-msgstr ""
-
-#: src/frequencies.q:113
-msgid "S.E. Mean"
-msgstr ""
-
-#: src/frequencies.q:115
-msgid "Mode"
-msgstr ""
-
-#: src/frequencies.q:119
-msgid "S.E. Kurt"
-msgstr ""
-
-#: src/frequencies.q:121
-msgid "S.E. Skew"
-msgstr ""
-
-#: src/frequencies.q:396
-msgid ""
-"At most one of BARCHART, HISTOGRAM, or HBAR should be given. HBAR will be "
-"assumed. Argument values will be given precedence increasing along the "
-"order given."
-msgstr ""
-
-#: src/frequencies.q:479
-#, c-format
-msgid ""
-"MAX must be greater than or equal to MIN, if both are specified. However, "
-"MIN was specified as %g and MAX as %g. MIN and MAX will be ignored."
-msgstr ""
-
-#: src/frequencies.q:802
-msgid ""
-"Upper limit of integer mode value range must be greater than lower limit."
-msgstr ""
-
-#: src/frequencies.q:815
-#, c-format
-msgid "Variable %s specified multiple times on VARIABLES subcommand."
-msgstr ""
-
-#: src/frequencies.q:821
-#, c-format
-msgid "Integer mode specified, but %s is not a numeric variable."
-msgstr ""
-
-#: src/frequencies.q:887
-msgid "`)' expected after GROUPED interval list."
-msgstr ""
-
-#: src/frequencies.q:899
-#, c-format
-msgid "Variables %s specified on GROUPED but not on VARIABLES."
-msgstr ""
-
-#: src/frequencies.q:906
-#, c-format
-msgid "Variables %s specified multiple times on GROUPED subcommand."
-msgstr ""
-
-#: src/frequencies.q:1137 src/frequencies.q:1229 src/frequencies.q:1230
-#: src/frequencies.q:1262
-msgid "Cum"
-msgstr ""
-
-#: src/frequencies.q:1159
-msgid "Value Label"
-msgstr ""
-
-#: src/frequencies.q:1260
-msgid "Freq"
-msgstr ""
-
-#: src/frequencies.q:1261 src/frequencies.q:1263
-msgid "Pct"
-msgstr ""
-
-#: src/frequencies.q:1482
-#, c-format
-msgid "No valid data for variable %s; statistics not displayed."
-msgstr ""
-
-#: src/list.q:150
-#, c-format
-msgid ""
-"The first case (%ld) specified precedes the last case (%ld) specified. The "
-"values will be swapped."
-msgstr ""
-
-#: src/list.q:158
-#, c-format
-msgid ""
-"The first case (%ld) to list is less than 1. The value is being reset to 1."
-msgstr ""
-
-#: src/list.q:164
-#, c-format
-msgid ""
-"The last case (%ld) to list is less than 1. The value is being reset to 1."
-msgstr ""
-
-#: src/list.q:170
-#, c-format
-msgid "The step value %ld is less than 1. The value is being reset to 1."
-msgstr ""
-
-#: src/list.q:197
-msgid "`/FORMAT WEIGHT' specified, but weighting is not on."
-msgstr ""
-
-#: src/list.q:438
-msgid "Line"
-msgstr ""
-
-#: src/means.q:100
-msgid "Missing required subcommand TABLES."
-msgstr ""
-
-#: src/means.q:134
-msgid "TABLES subcommand may not appear more than once."
-msgstr ""
-
-#: src/oneway.q:170
-msgid "Number of contrast coefficients must equal the number of groups"
-msgstr ""
-
-#: src/oneway.q:179
-#, c-format
-msgid "Coefficients for contrast %d do not total zero"
-msgstr ""
-
-#: src/oneway.q:244
-#, c-format
-msgid "`%s' is not a variable name"
-msgstr ""
-
-#: src/oneway.q:279
-msgid "Sum of Squares"
-msgstr ""
-
-#: src/oneway.q:281
-msgid "Mean Square"
-msgstr ""
-
-#: src/oneway.q:282 src/t-test.q:970
-msgid "F"
-msgstr ""
-
-#: src/oneway.q:283 src/oneway.q:536
-msgid "Significance"
-msgstr ""
-
-#: src/oneway.q:305
-msgid "Between Groups"
-msgstr ""
-
-#: src/oneway.q:306
-msgid "Within Groups"
-msgstr ""
-
-#: src/oneway.q:353
-msgid "ANOVA"
-msgstr ""
-
-#: src/oneway.q:533
-msgid "Levene Statistic"
-msgstr ""
-
-#: src/oneway.q:534
-msgid "df1"
-msgstr ""
-
-#: src/oneway.q:535
-msgid "df2"
-msgstr ""
-
-#: src/oneway.q:539
-msgid "Test of Homogeneity of Variances"
-msgstr ""
-
-#: src/oneway.q:609
-msgid "Contrast Coefficients"
-msgstr ""
-
-#: src/oneway.q:611 src/oneway.q:678
-msgid "Contrast"
-msgstr ""
-
-#: src/oneway.q:676
-msgid "Contrast Tests"
-msgstr ""
-
-#: src/oneway.q:679
-msgid "Value of Contrast"
-msgstr ""
-
-#: src/oneway.q:681 src/t-test.q:972 src/t-test.q:1164 src/t-test.q:1256
-msgid "t"
-msgstr ""
-
-#: src/oneway.q:683 src/t-test.q:974 src/t-test.q:1166 src/t-test.q:1258
-msgid "Sig. (2-tailed)"
-msgstr ""
-
-#: src/oneway.q:727
-msgid "Assume equal variances"
-msgstr ""
-
-#: src/oneway.q:731
-msgid "Does not assume equal"
-msgstr ""
-
-#: src/set.q:221 src/set.q:300 src/set.q:343 src/set.q:398 src/set.q:400
-#: src/set.q:402 src/set.q:404 src/set.q:406 src/set.q:408 src/set.q:410
-#: src/set.q:412 src/set.q:414 src/set.q:416 src/set.q:418 src/set.q:420
-#: src/set.q:422 src/set.q:828 src/set.q:909 src/set.q:1004
-#, c-format
-msgid "%s is obsolete."
-msgstr ""
-
-#: src/set.q:229
-msgid "LISTING is ON"
-msgstr ""
-
-#: src/set.q:231
-msgid "LISTING is OFF"
-msgstr ""
-
-#: src/set.q:245
-#, c-format
-msgid "EPOCH is %d"
-msgstr ""
-
-#: src/set.q:264
-msgid "Journalling is off"
-msgstr ""
-
-#: src/set.q:431
-msgid ""
-"CASE is not implemented and probably won't be. If you care, complain about "
-"it."
-msgstr ""
-
-#: src/set.q:436
-msgid "Active file compression is not yet implemented (and probably won't be)."
-msgstr ""
-
-#: src/set.q:450
-#, c-format
-msgid ""
-"CC%c: Length of custom currency string `%s' (%d) exceeds maximum length of "
-"16."
-msgstr ""
-
-#: src/set.q:472
-#, c-format
-msgid ""
-"CC%c: Custom currency string `%s' does not contain exactly three periods or "
-"commas (not both)."
-msgstr ""
-
-#: src/set.q:525
-msgid "None"
-msgstr ""
-
-#: src/set.q:531
-msgid "Disabled"
-msgstr ""
-
-#: src/set.q:536
-msgid "Screen"
-msgstr ""
-
-#: src/set.q:543
-msgid "Listing"
-msgstr ""
-
-#: src/set.q:550
-msgid "Other"
-msgstr ""
-
-#: src/set.q:659
-msgid "EPOCH must be 1500 or later."
-msgstr ""
-
-#: src/set.q:666
-msgid "expecting AUTOMATIC or year"
-msgstr ""
-
-#: src/set.q:687
-msgid "LENGTH must be at least 1."
-msgstr ""
-
-#: src/set.q:726
-msgid "Missing identifier in RESULTS subcommand."
-msgstr ""
-
-#: src/set.q:737
-msgid "Unrecognized identifier in RESULTS subcommand."
-msgstr ""
-
-#: src/set.q:774
-msgid "WIDTH must be at least 1."
-msgstr ""
-
-#: src/set.q:797
-#, c-format
-msgid ""
-"FORMAT requires numeric output format as an argument. Specified format %s "
-"is of type string."
-msgstr ""
-
-#: src/set.q:841
-msgid "Text color must be in range 0-15."
-msgstr ""
-
-#: src/set.q:854
-msgid "Background color must be in range 0-7."
-msgstr ""
-
-#: src/set.q:865
-msgid "Border color must be in range 0-7."
-msgstr ""
-
-#: src/set.q:921
-msgid "Lower window color must be between 0 and 6."
-msgstr ""
-
-#: src/set.q:935
-msgid "Upper window color must be between 0 and 6."
-msgstr ""
-
-#: src/set.q:947
-msgid "Frame color must be between 0 and 6."
-msgstr ""
-
-#: src/set.q:1013
-msgid "Drive letter expected in WORKDEV subcommand."
-msgstr ""
-
-#: src/set.q:1045
-msgid "Specify a terminal type with the TERM environment variable."
-msgstr ""
-
-#: src/set.q:1051
-msgid "Could not access the termcap data base."
-msgstr ""
-
-#: src/set.q:1053
-#, c-format
-msgid "Terminal type `%s' is not defined."
-msgstr ""
-
-#: src/set.q:1111
-msgid "data> "
-msgstr ""
-
-#: src/t-test.q:265
-msgid "TESTVAL, GROUPS and PAIRS subcommands are mutually exclusive."
-msgstr ""
-
-#: src/t-test.q:283
-msgid "VARIABLES subcommand is not appropriate with PAIRS"
-msgstr ""
-
-#: src/t-test.q:321
-msgid "One or more VARIABLES must be specified."
-msgstr ""
-
-#: src/t-test.q:372
-#, c-format
-msgid "Long string variable %s is not valid here."
-msgstr ""
-
-#: src/t-test.q:392 src/t-test.q:407
-msgid ""
-"When applying GROUPS to a string variable, two values must be specified."
-msgstr ""
-
-#: src/t-test.q:479
-#, c-format
-msgid ""
-"PAIRED was specified but the number of variables preceding WITH (%d) did not "
-"match the number following (%d)."
-msgstr ""
-
-#: src/t-test.q:496
-msgid "At least two variables must be specified on PAIRS."
-msgstr ""
-
-#: src/t-test.q:673
-msgid "One-Sample Statistics"
-msgstr ""
-
-#: src/t-test.q:678 src/t-test.q:701 src/t-test.q:825
-msgid "SE. Mean"
-msgstr ""
-
-#: src/t-test.q:695
-msgid "Group Statistics"
-msgstr ""
-
-#: src/t-test.q:819
-msgid "Paired Sample Statistics"
-msgstr ""
-
-#: src/t-test.q:841 src/t-test.q:1185 src/t-test.q:1375
-#, c-format
-msgid "Pair %d"
-msgstr ""
-
-#: src/t-test.q:958
-msgid "Independent Samples Test"
-msgstr ""
-
-#: src/t-test.q:966
-msgid "Levene's Test for Equality of Variances"
-msgstr ""
-
-#: src/t-test.q:968
-msgid "t-test for Equality of Means"
-msgstr ""
-
-#: src/t-test.q:971 src/t-test.q:1360
-msgid "Sig."
-msgstr ""
-
-#: src/t-test.q:975 src/t-test.q:1259
-msgid "Mean Difference"
-msgstr ""
-
-#: src/t-test.q:976
-msgid "Std. Error Difference"
-msgstr ""
-
-#: src/t-test.q:981 src/t-test.q:1156 src/t-test.q:1251
-#, c-format
-msgid "%g%% Confidence Interval of the Difference"
-msgstr ""
-
-#: src/t-test.q:1036
-msgid "Equal variances assumed"
-msgstr ""
-
-#: src/t-test.q:1088
-msgid "Equal variances not assumed"
-msgstr ""
-
-#: src/t-test.q:1146
-msgid "Paired Samples Test"
-msgstr ""
-
-#: src/t-test.q:1149
-msgid "Paired Differences"
-msgstr ""
-
-#: src/t-test.q:1161
-msgid "Std. Error Mean"
-msgstr ""
-
-#: src/t-test.q:1240
-msgid "One-Sample Test"
-msgstr ""
-
-#: src/t-test.q:1245
-#, c-format
-msgid "Test Value = %f"
-msgstr ""
-
-#: src/t-test.q:1355
-msgid "Paired Samples Correlations"
-msgstr ""
-
-#: src/t-test.q:1359
-msgid "Correlation"
-msgstr ""
-
-#: src/t-test.q:1378
-#, c-format
-msgid "%s & %s"
-msgstr ""
declarations on whether gcc is in use. */
#if __GNUC__ > 1
#define ATTRIBUTE(X) __attribute__ (X)
+
+/* Only necessary because of a wart in gnulib's xalloc.h. */
+#define __attribute__(X) __attribute__ (X)
#else
#define ATTRIBUTE(X)
#endif
#define MALLOC_LIKE
#endif
\f
-/* Internationalization. */
-#include <libintl.h>
-
-#if !ENABLE_NLS
-/* If we don't do this then gettext() still monkeys with the
- string, keeping gcc from checking printf() format types. */
-#undef gettext
-#define gettext(STRING) STRING
-#endif
-
-#define _(STRING) gettext(STRING)
-#define N_(STRING) STRING
-\f
/* Filesystems. */
/* Directory separator and path delimiter for this OS. */
+Sun Jul 31 14:09:57 2005 Ben Pfaff <blp@gnu.org>
+
+ Adopt use of gnulib for portability.
+
+ * Make.build: Add $(top_srcdir)/gl and $(top_builddir)/gl to
+ include path.
+
+ * Makefile.am: Remove bool.h, stat.h and change getline.[ch] to
+ getl.[ch] in pspp_SOURCES. Remove libmisc, add libgl in
+ pspp_LDADD.
+
+ * In many source files, added an explicit inclusion of gettext.h
+ and definition of _ macro. These are no longer in pref.h because
+ it interfered with definitions in a few gnulib source files.
+
+ * In many source files, changed #include "bool.h" to #include
+ <stdbool.h>, which is provided by gnulib.
+
+ * alloc.c: Removed functions defined in gnulib:
+ (xmalloc) Removed.
+ (xcalloc) Removed.
+ (xrealloc) Removed.
+ (xstrdup) Removed.
+ (out_of_memory) Redefined as wrapper for xalloc_die().
+
+ * alloc.h: Replace prototypes by #include "xalloc.h".
+
+ * casefile.c: Use full_read() and full_write() from gnulib instead
+ of our home-grown versions.
+ (full_read) Removed.
+ (full_write) Removed.
+
+ * getline.c: Renamed getl.c.
+
+ * getline.h: Renamed getl.h, updated all references.
+
+ * filename.c: (fn_readlink) Change to wrapper around xreadlink()
+ from gnulib.
+
+ * glob.c: Just #include <time.h> instead of the crazy rigmarole
+ here before.
+ (init_glob) Call set_program_name() to initial gnulib progname
+ module.
+
+ * html.c: (postopen) Use getlogin_r(), gethostname() from gnulib.
+
+ * permissions.c: Use "stat-macros.h" from gnulib.
+
+ * postscript.c: Just #include <time.h> instead of the crazy
+ rigmarole here before.
+
+ * q2c.c: (main) Make generated code #include "gettext.h".
+
+ * str.h: Get rid of most explicit declarations of standard
+ functions, in favor of including gnulib header files.
+
+ * expressions/evaluate.c: Ditto.
+
+ * expressions/operations.h.pl: Make generated code #include
+ <stdbool.h>, not "bool.h".
+
Sat Jul 30 23:13:17 2005 Ben Pfaff <blp@gnu.org>
* expressions/parse.c: (validate_function_args) Fix two msg() bugs
## Makefile.am include file -*- makefile -*-
AM_CPPFLAGS = -I$(top_srcdir) -I$(top_srcdir)/src -I$(top_srcdir)/lib \
--I$(top_srcdir)/intl
+-I$(top_srcdir)/intl -I$(top_srcdir)/gl -I$(top_builddir)/gl
AM_CFLAGS=
pspp_SOURCES = $(q_sources_c) $(chart_sources) \
aggregate.c algorithm.c algorithm.h \
alloc.c alloc.h apply-dict.c ascii.c autorecode.c bitvector.h \
-bool.h \
calendar.c calendar.h case.c case.h casefile.c casefile.h chart.c \
chart.h cmdline.c cmdline.h command.c command.def \
command.h compute.c copyleft.c copyleft.h count.c data-in.c data-in.h \
dictionary.c dictionary.h do-if.c do-ifP.h echo.c error.c \
error.h factor_stats.c factor_stats.h file-handle.h \
file-type.c filename.c filename.h flip.c font.h format.c format.def \
-format.h formats.c get.c getline.c getline.h glob.c glob.h \
+format.h formats.c get.c getl.c getl.h glob.c glob.h \
groff-font.c group.c group.h group_proc.h \
hash.c hash.h histogram.c histogram.h \
html.c htmlP.h include.c inpt-pgm.c lexer.c lexer.h levene.c levene.h \
sfm-read.c sfm-read.h sfm-write.c sfm-write.h sfmP.h som.c som.h \
sort.c sort.h sort-prs.c sort-prs.h \
split-file.c str.c str.h subclist.c subclist.h \
-sysfile-info.c tab.c tab.h temporary.c stat.h mkfile.c mkfile.h \
+sysfile-info.c tab.c tab.h temporary.c mkfile.c mkfile.h \
title.c val.h val-labs.c value-labels.c value-labels.h \
var-display.c \
var-labs.c var.h vars-atr.c vars-prs.c vector.c version.h \
vfm.c vfm.h vfmP.h weight.c
-pspp_LDADD = \
- ../lib/misc/libmisc.a \
+pspp_LDADD = \
expressions/libexpressions.a \
../lib/gsl-extras/libgsl-extras.a \
+ ../gl/libgl.a \
@LIBINTL@
nodist_pspp_SOURCES = version.c
#include "vfm.h"
#include "vfmP.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Specifies how to make an aggregate variable. */
struct agr_var
{
#include <stdlib.h>
#include "error.h"
#include "str.h"
-\f
-/* Public functions. */
-
-/* Allocates a block of SIZE bytes and returns it.
- If SIZE is 0, returns a null pointer.
- Aborts if unsuccessful. */
-void *
-xmalloc (size_t size)
-{
- void *vp;
- if (size == 0)
- return NULL;
-
- vp = malloc (size);
- if (!vp)
- out_of_memory ();
-
- return vp;
-}
-
-
-/* Allocates a continous block of N_MEMB by SIZE elements, with all
- bits set to 0.
- Aborts if unsuccessful.
-*/
-void *
-xcalloc (size_t n_memb, size_t size)
-{
- const size_t prod = size * n_memb;
- void *vp = 0;
-
- if (prod == 0)
- return NULL;
-
- /* Trap overflow errors */
- assert ( prod >= size );
- assert ( prod >= n_memb ) ;
-
- vp = xmalloc ( prod );
- memset (vp, 0, prod);
- return vp;
-}
-
-
-
-/* If SIZE is 0, then block PTR is freed and a null pointer is
- returned.
- Otherwise, if PTR is a null pointer, then a new block is allocated
- and returned.
- Otherwise, block PTR is reallocated to be SIZE bytes in size and
- the new location of the block is returned.
- Aborts if unsuccessful. */
-void *
-xrealloc (void *ptr, size_t size)
-{
- void *vp;
- if (!size)
- {
- if (ptr)
- free (ptr);
-
- return NULL;
- }
-
- if (ptr)
- vp = realloc (ptr, size);
- else
- vp = malloc (size);
-
- if (!vp)
- out_of_memory ();
-
- return vp;
-}
-
-/* Makes a copy of string S in malloc()'d memory and returns the copy.
- S must not be a null pointer. */
-char *
-xstrdup (const char *s)
-{
- size_t size;
- char *t;
-
- assert (s != NULL);
-
- size = strlen (s) + 1;
-
- t = malloc (size);
- if (!t)
- out_of_memory ();
-
- memcpy (t, s, size);
- return t;
-}
/* Report an out-of-memory condition and abort execution. */
void
out_of_memory (void)
{
- fprintf (stderr, "virtual memory exhausted\n");
- exit (EXIT_FAILURE);
+ xalloc_die ();
}
#include <stddef.h>
/* malloc() wrapper functions. */
-void *xmalloc (size_t size);
-void *xcalloc (size_t n_memb, size_t size);
-void *xrealloc (void *ptr, size_t size);
-char *xstrdup (const char *s);
+#include "xalloc.h"
void out_of_memory (void) NO_RETURN;
\f
/* alloca() wrapper functions. */
#include "value-labels.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Parses and executes APPLY DICTIONARY. */
#include "pool.h"
#include "version.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* ASCII driver options: (defaults listed first)
output-file="pspp.list"
#include "var.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* FIXME: Implement PRINT subcommand. */
/* Explains how to recode one value. `from' must be first element. */
+++ /dev/null
-#ifndef BOOL_H
-#define BOOL_H 1
-
-#if HAVE_STDBOOL_H
-# include <stdbool.h>
-#else
-# if ! HAVE__BOOL
-# ifdef __cplusplus
-typedef bool _Bool;
-# else
-typedef unsigned char _Bool;
-# endif
-# endif
-# define bool _Bool
-# define false 0
-# define true 1
-# define __bool_true_false_are_defined 1
-#endif
-
-#endif /* bool.h */
#include <config.h>
#include "calendar.h"
#include <assert.h>
-#include "bool.h"
+#include <stdbool.h>
#include "settings.h"
#include "val.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* 14 Oct 1582. */
#define EPOCH (-577734)
#define HEADER_CASE
#include <stddef.h>
-#include "bool.h"
+#include <stdbool.h>
#include "val.h"
/* Opaque structure that represents a case. Use accessor
#include "alloc.h"
#include "case.h"
#include "error.h"
+#include "full-read.h"
+#include "full-write.h"
#include "misc.h"
#include "mkfile.h"
#include "settings.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#define IO_BUF_SIZE (8192 / sizeof (union value))
/* A casefile represents a sequentially accessible stream of
static int safe_open (const char *filename, int flags);
static int safe_close (int fd);
-static int full_read (int fd, void *buffer, size_t size);
-static int full_write (int fd, const void *buffer, size_t size);
/* Creates and returns a casefile to store cases of VALUE_CNT
`union value's each. */
return retval;
}
-/* Calls read(), passing FD, BUFFER, and SIZE, repeating as
- necessary to deal with interrupted calls. */
-static int
-full_read (int fd, void *buffer_, size_t size)
-{
- char *buffer = buffer_;
- size_t bytes_read = 0;
-
- while (bytes_read < size)
- {
- int retval = read (fd, buffer + bytes_read, size - bytes_read);
- if (retval > 0)
- bytes_read += retval;
- else if (retval == 0)
- return bytes_read;
- else if (errno != EINTR)
- return -1;
- }
-
- return bytes_read;
-}
-
-/* Calls write(), passing FD, BUFFER, and SIZE, repeating as
- necessary to deal with interrupted calls. */
-static int
-full_write (int fd, const void *buffer_, size_t size)
-{
- const char *buffer = buffer_;
- size_t bytes_written = 0;
-
- while (bytes_written < size)
- {
- int retval = write (fd, buffer + bytes_written, size - bytes_written);
- if (retval >= 0)
- bytes_written += retval;
- else if (errno != EINTR)
- return -1;
- }
-
- return bytes_written;
-}
-
-
/* Registers our exit handler with atexit() if it has not already
been registered. */
static void
#define HEADER_CASEFILE
#include <stddef.h>
-#include "bool.h"
+#include <stdbool.h>
struct ccase;
struct casefile;
#include "alloc.h"
#include "error.h"
#include "filename.h"
-#include "getline.h"
+#include "getl.h"
#include "main.h"
#include "output.h"
#include "settings.h"
#include "copyleft.h"
#include "glob.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
+
void welcome (void);
static void usage (void);
config_path = optarg;
break;
case 'f':
- printf(_("%s is not yet implemented."), "-f");
+ printf (_("%s is not yet implemented."), "-f");
putchar('\n');
break;
case 'h':
#include "dictionary.h"
#include "error.h"
#include "glob.h"
-#include "getline.h"
+#include "getl.h"
#include "lexer.h"
#include "main.h"
#include "settings.h"
#if HAVE_SYS_WAIT_H
#include <sys/wait.h>
#endif
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
\f
/* Global variables. */
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
struct compute_trns;
struct lvalue;
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Implementation details:
The S?SS manuals do not specify the order that COUNT subcommands are
#include "var.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
+
/* (headers) */
#include "debug-print.h"
#include <stddef.h>
#include <stdio.h>
#include <stdlib.h>
-#include "bool.h"
+#include <stdbool.h>
#include "error.h"
-#include "getline.h"
+#include "getl.h"
#include "calendar.h"
#include "lexer.h"
#include "magic.h"
#include "settings.h"
#include "str.h"
#include "var.h"
-\f
-#include "debug-print.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
+#include "debug-print.h"
\f
/* Specialized error routine. */
#define data_in_h 1
#include <stddef.h>
-#include "bool.h"
+#include <stdbool.h>
#include "format.h"
/* Flags. */
#include "tab.h"
#include "var.h"
#include "vfm.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
\f
/* Utility function. */
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
\f
/* Public functions. */
#include "error.h"
#include "lexer.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Stub for USE command. */
int
cmd_use (void)
#include "var.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
+
/* DESCRIPTIVES private data. */
struct dsc_proc;
#include "alloc.h"
#include "error.h"
#include "filename.h"
-#include "getline.h"
+#include "getl.h"
#include "output.h"
#include "som.h"
#include "tab.h"
#include "version.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Device-independent output driver extension record. */
struct devind_driver_ext
{
#include "error.h"
#include "file-handle.h"
#include "filename.h"
-#include "getline.h"
+#include "getl.h"
#include "lexer.h"
#include "str.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Flags for DFM readers. */
#include "filename.h"
#include "str.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Data file writer. */
struct dfm_writer
{
#include "value-labels.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* A dictionary. */
struct dictionary
{
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* *INDENT-OFF* */
#include <stdlib.h>
#include "alloc.h"
#include "command.h"
-#include "getline.h"
+#include "getl.h"
#include "glob.h"
#include "lexer.h"
#include "main.h"
#include "var.h"
#include "version.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
+
int err_error_count;
int err_warning_count;
#include "moments.h"
#include "percentiles.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
+
/* (headers) */
#include "chart.h"
#include <config.h>
#include "private.h"
-#if TIME_WITH_SYS_TIME
-#include <sys/time.h>
-#include <time.h>
-#else
-#if HAVE_SYS_TIME_H
-#include <sys/time.h>
-#else
-#include <time.h>
-#endif
-#endif
-
#include <ctype.h>
#include "alloc.h"
#include "error.h"
#include <gsl/gsl_sf.h>
#include <limits.h>
#include <math.h>
-#include "bool.h"
+#include <stdbool.h>
#include "case.h"
#include "data-in.h"
#include "dictionary.h"
#include "var.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
static inline double check_errno (double x)
{
return errno == 0 ? x : SYSMIS;
sub generate_output {
print "#include <stdlib.h>\n";
- print "#include \"bool.h\"\n\n";
+ print "#include <stdbool.h>\n\n";
print "typedef enum";
print " {\n";
#include "filename.h"
#include "command.h"
#include "lexer.h"
-#include "getline.h"
+#include "getl.h"
#include "error.h"
#include "magic.h"
#include "var.h"
#include "linked-list.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* (headers) */
/* File handle. */
#include "var.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Defines the three types of complex files read by FILE TYPE. */
enum
{
#include <config.h>
#include "error.h"
#include "filename.h"
+#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <errno.h>
#include "settings.h"
#include "str.h"
#include "version.h"
+#include "xreadlink.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
#include "debug-print.h"
#if HAVE_UNISTD_H
#include <unistd.h>
#endif
-#include "stat.h"
+#include <sys/stat.h>
+#include "stat-macros.h"
#endif
#ifdef __WIN32__
#endif
}
-#ifdef unix
-/* Stolen from libc.info but heavily modified, this is a wrapper
- around readlink() that allows for arbitrary filename length. */
-char *
-fn_readlink (const char *filename)
-{
- int size = 128;
-
- for (;;)
- {
- char *buffer = xmalloc (size);
- int nchars = readlink (filename, buffer, size);
- if (nchars == -1)
- {
- free (buffer);
- return NULL;
- }
-
- if (nchars < size - 1)
- {
- buffer[nchars] = 0;
- return buffer;
- }
- free (buffer);
- size *= 2;
- }
-}
-#else /* Not UNIX. */
+/* Returns the symbolic link value for FILENAME as a dynamically
+ allocated buffer, or a null pointer on failure. */
char *
fn_readlink (const char *filename)
{
- return NULL;
+ return xreadlink (filename, 32);
}
-#endif /* Not UNIX. */
\f
/* Environment variables. */
#include <sys/types.h>
#endif
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* List of variable names. */
struct varname
{
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#define DEFFMT(LABEL, NAME, N_ARGS, IMIN_W, IMAX_W, OMIN_W, OMAX_W, CAT, \
OUTPUT, SPSS_FMT) \
{NAME, N_ARGS, IMIN_W, IMAX_W, OMIN_W, OMAX_W, CAT, OUTPUT, SPSS_FMT},
/* Display format types. */
-#include "bool.h"
+#include <stdbool.h>
/* See the definitions of these functions and variables when modifying
this list:
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
enum
#include "vfm.h"
#include "settings.h"
#include "chart.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
+
/* (headers) */
#include "debug-print.h"
#include "vfm.h"
#include "vfmP.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Rearranging and reducing a dictionary. */
--- /dev/null
+/* PSPP - computes sample statistics.
+ Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.
+ Written by Ben Pfaff <blp@gnu.org>.
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License as
+ published by the Free Software Foundation; either version 2 of the
+ License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#include <config.h>
+#include "getl.h"
+#include "error.h"
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include "alloc.h"
+#include "command.h"
+#include "error.h"
+#include "filename.h"
+#include "lexer.h"
+#include "repeat.h"
+#include "settings.h"
+#include "str.h"
+#include "tab.h"
+#include "var.h"
+#include "version.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
+/* Global variables. */
+struct string getl_buf;
+struct getl_script *getl_head;
+struct getl_script *getl_tail;
+int getl_interactive;
+int getl_welcomed;
+int getl_mode;
+int getl_prompt;
+
+#if HAVE_LIBREADLINE
+#include <readline/readline.h>
+#endif
+
+#if HAVE_LIBHISTORY
+static char *history_file;
+
+#if HAVE_READLINE_HISTORY_H
+#include <readline/history.h>
+#else /* no readline/history.h */
+extern void add_history (char *);
+extern void using_history (void);
+extern int read_history (char *);
+extern void stifle_history (int);
+extern int write_history (char *);
+#endif /* no readline/history.h */
+#endif /* -lhistory */
+
+
+extern struct cmd_set cmd;
+
+static struct string getl_include_path;
+
+/* Number of levels of DO REPEAT structures we're nested inside. If
+ this is greater than zero then DO REPEAT macro substitutions are
+ performed. */
+static int DO_REPEAT_level;
+
+static int read_console (void);
+
+/* Initialize getl. */
+void
+getl_initialize (void)
+{
+ ds_create (&getl_include_path,
+ fn_getenv_default ("STAT_INCLUDE_PATH", include_path));
+ ds_init (&getl_buf, 256);
+#if HAVE_LIBREADLINE
+ rl_completion_entry_function = pspp_completion_function;
+#endif
+}
+
+/* Close getl. */
+void
+getl_uninitialize (void)
+{
+ getl_close_all();
+#if HAVE_LIBHISTORY && defined (unix)
+ if (history_file)
+ write_history (history_file);
+#endif
+ ds_destroy (&getl_buf);
+ ds_destroy (&getl_include_path);
+}
+
+/* Returns a string that represents the directory that the syntax file
+ currently being read resides in. If there is no syntax file then
+ returns the OS current working directory. Return value must be
+ free()'d. */
+char *
+getl_get_current_directory (void)
+{
+ return getl_head ? fn_dirname (getl_head->fn) : fn_get_cwd ();
+}
+
+/* Delete everything from the include path. */
+void
+getl_clear_include_path (void)
+{
+ ds_clear (&getl_include_path);
+}
+
+/* Add to the include path. */
+void
+getl_add_include_dir (const char *path)
+{
+ if (ds_length (&getl_include_path))
+ ds_putc (&getl_include_path, PATH_DELIMITER);
+
+ ds_puts (&getl_include_path, path);
+}
+
+/* Adds FN to the tail end of the list of script files to execute.
+ OPTIONS is the value to stick in the options field of the
+ getl_script struct. If WHERE is zero then the file is added after
+ all other files; otherwise it is added before all other files (this
+ can be done only if parsing has not yet begun). */
+void
+getl_add_file (const char *fn, int separate, int where)
+{
+ struct getl_script *n = xmalloc (sizeof *n);
+
+ assert (fn != NULL);
+ n->next = NULL;
+ if (getl_tail == NULL)
+ getl_head = getl_tail = n;
+ else if (!where)
+ getl_tail = getl_tail->next = n;
+ else
+ {
+ assert (getl_head->f == NULL);
+ n->next = getl_head;
+ getl_head = n;
+ }
+ n->included_from = n->includes = NULL;
+ n->fn = xstrdup (fn);
+ n->ln = 0;
+ n->f = NULL;
+ n->separate = separate;
+ n->first_line = NULL;
+}
+
+/* Inserts the given file with filename FN into the current file after
+ the current line. */
+void
+getl_include (const char *fn)
+{
+ struct getl_script *n;
+ char *real_fn;
+
+ {
+ char *cur_dir = getl_get_current_directory ();
+ real_fn = fn_search_path (fn, ds_c_str (&getl_include_path), cur_dir);
+ free (cur_dir);
+ }
+
+ if (!real_fn)
+ {
+ msg (SE, _("Can't find `%s' in include file search path."), fn);
+ return;
+ }
+
+ if (!getl_head)
+ {
+ getl_add_file (real_fn, 0, 0);
+ free (real_fn);
+ }
+ else
+ {
+ n = xmalloc (sizeof *n);
+ n->included_from = getl_head;
+ getl_head = getl_head->includes = n;
+ n->includes = NULL;
+ n->next = NULL;
+ n->fn = real_fn;
+ n->ln = 0;
+ n->f = NULL;
+ n->separate = 0;
+ n->first_line = NULL;
+ }
+}
+
+/* Add the virtual file FILE to the list of files to be processed.
+ The first_line field in FILE must already have been initialized. */
+void
+getl_add_virtual_file (struct getl_script *file)
+{
+ if (getl_tail == NULL)
+ getl_head = getl_tail = file;
+ else
+ getl_tail = getl_tail->next = file;
+ file->included_from = file->includes = NULL;
+ file->next = NULL;
+ file->fn = file->first_line->line;
+ file->ln = -file->first_line->len - 1;
+ file->separate = 0;
+ file->f = NULL;
+ file->cur_line = NULL;
+ file->remaining_loops = 1;
+ file->loop_index = -1;
+ file->macros = NULL;
+}
+
+/* Causes the DO REPEAT virtual file passed in FILE to be included in
+ the current file. The first_line, cur_line, remaining_loops,
+ loop_index, and macros fields in FILE must already have been
+ initialized. */
+void
+getl_add_DO_REPEAT_file (struct getl_script *file)
+{
+ /* getl_head == NULL can't happen. */
+ assert (getl_head);
+
+ DO_REPEAT_level++;
+ file->included_from = getl_head;
+ getl_head = getl_head->includes = file;
+ file->includes = NULL;
+ file->next = NULL;
+ assert (file->first_line->len < 0);
+ file->fn = file->first_line->line;
+ file->ln = -file->first_line->len - 1;
+ file->separate = 0;
+ file->f = NULL;
+}
+
+/* Display a welcoming message. */
+static void
+welcome (void)
+{
+ getl_welcomed = 1;
+ fputs ("PSPP is free software and you are welcome to distribute copies of "
+ "it\nunder certain conditions; type \"show copying.\" to see the "
+ "conditions.\nThere is ABSOLUTELY NO WARRANTY for PSPP; type \"show "
+ "warranty.\" for details.\n", stdout);
+ puts (stat_version);
+}
+
+/* Reads a single line from the user's terminal. */
+
+/* From repeat.c. */
+extern void perform_DO_REPEAT_substitutions (void);
+
+/* Reads a single line from the line buffer associated with getl_head.
+ Returns 1 if a line was successfully read or 0 if no more lines are
+ available. */
+static int
+handle_line_buffer (void)
+{
+ struct getl_script *s = getl_head;
+
+ /* Check that we're not all done. */
+ do
+ {
+ if (s->cur_line == NULL)
+ {
+ s->loop_index++;
+ if (s->remaining_loops-- == 0)
+ return 0;
+ s->cur_line = s->first_line;
+ }
+
+ if (s->cur_line->len < 0)
+ {
+ s->ln = -s->cur_line->len - 1;
+ s->fn = s->cur_line->line;
+ s->cur_line = s->cur_line->next;
+ continue;
+ }
+ }
+ while (s->cur_line == NULL);
+
+ ds_concat (&getl_buf, s->cur_line->line, s->cur_line->len);
+
+ /* Advance pointers. */
+ s->cur_line = s->cur_line->next;
+ s->ln++;
+
+ return 1;
+}
+
+/* Reads a single line into getl_buf from the list of files. Will not
+ read from the eof of one file to the beginning of another unless
+ the options field on the new file's getl_script is nonzero. Return
+ zero on eof. */
+int
+getl_read_line (void)
+{
+ getl_mode = GETL_MODE_BATCH;
+
+ while (getl_head)
+ {
+ struct getl_script *s = getl_head;
+
+ ds_clear (&getl_buf);
+ if (s->separate)
+ return 0;
+
+ if (s->first_line)
+ {
+ if (!handle_line_buffer ())
+ {
+ getl_close_file ();
+ continue;
+ }
+ perform_DO_REPEAT_substitutions ();
+ if (getl_head->print)
+ tab_output_text (TAB_LEFT | TAT_FIX | TAT_PRINTF, "+%s",
+ ds_c_str (&getl_buf));
+ return 1;
+ }
+
+ if (s->f == NULL)
+ {
+ msg (VM (1), _("%s: Opening as syntax file."), s->fn);
+ s->f = fn_open (s->fn, "r");
+
+ if (s->f == NULL)
+ {
+ msg (ME, _("Opening `%s': %s."), s->fn, strerror (errno));
+ getl_close_file ();
+ continue;
+ }
+ }
+
+ if (!ds_gets (&getl_buf, s->f))
+ {
+ if (ferror (s->f))
+ msg (ME, _("Reading `%s': %s."), s->fn, strerror (errno));
+ getl_close_file ();
+ continue;
+ }
+ if (ds_length (&getl_buf) > 0 && ds_end (&getl_buf)[-1] == '\n')
+ ds_truncate (&getl_buf, ds_length (&getl_buf) - 1);
+
+ if (get_echo())
+ tab_output_text (TAB_LEFT | TAT_FIX, ds_c_str (&getl_buf));
+
+ getl_head->ln++;
+
+ /* Allows shebang invocation: `#! /usr/local/bin/pspp'. */
+ if (ds_c_str (&getl_buf)[0] == '#'
+ && ds_c_str (&getl_buf)[1] == '!')
+ continue;
+
+ return 1;
+ }
+
+ if (getl_interactive == 0)
+ return 0;
+
+ getl_mode = GETL_MODE_INTERACTIVE;
+
+ if (getl_welcomed == 0)
+ welcome ();
+
+ return read_console ();
+}
+
+/* Closes the current file, whether it be a main file or included
+ file, then moves getl_head to the next file in the chain. */
+void
+getl_close_file (void)
+{
+ struct getl_script *s = getl_head;
+
+ if (!s)
+ return;
+ assert (getl_tail != NULL);
+
+ if (s->first_line)
+ {
+ struct getl_line_list *cur, *next;
+
+ s->fn = NULL; /* It will be freed below. */
+ for (cur = s->first_line; cur; cur = next)
+ {
+ next = cur->next;
+ free (cur->line);
+ free (cur);
+ }
+
+ DO_REPEAT_level--;
+ }
+
+ if (s->f && EOF == fn_close (s->fn, s->f))
+ msg (MW, _("Closing `%s': %s."), s->fn, strerror (errno));
+ free (s->fn);
+
+ if (s->included_from)
+ {
+ getl_head = s->included_from;
+ getl_head->includes = NULL;
+ }
+ else
+ {
+ getl_head = s->next;
+ if (NULL == getl_head)
+ getl_tail = NULL;
+ }
+
+ free (s);
+}
+
+/* PORTME: Adapt to your local system's idea of the terminal. */
+#if HAVE_LIBREADLINE
+
+#if HAVE_READLINE_READLINE_H
+#include <readline/readline.h>
+#else /* no readline/readline.h */
+extern char *readline (char *);
+#endif /* no readline/readline.h */
+
+static int
+read_console (void)
+{
+ char *line;
+ char *prompt;
+
+ err_error_count = err_warning_count = 0;
+ err_already_flagged = 0;
+
+#if HAVE_LIBHISTORY
+ if (!history_file)
+ {
+#ifdef unix
+ history_file = tilde_expand (HISTORY_FILE);
+#endif
+ using_history ();
+ read_history (history_file);
+ stifle_history (MAX_HISTORY);
+ }
+#endif /* -lhistory */
+
+ switch (getl_prompt)
+ {
+ case GETL_PRPT_STANDARD:
+ prompt = get_prompt();
+ break;
+
+ case GETL_PRPT_CONTINUATION:
+ prompt = get_cprompt();
+ break;
+
+ case GETL_PRPT_DATA:
+ prompt = get_dprompt();
+ break;
+
+ default:
+ assert (0);
+ abort ();
+ }
+
+ line = readline (prompt);
+ if (!line)
+ return 0;
+
+#if HAVE_LIBHISTORY
+ if (*line)
+ add_history (line);
+#endif
+
+ ds_clear (&getl_buf);
+ ds_puts (&getl_buf, line);
+
+ free (line);
+
+ return 1;
+}
+#else /* no -lreadline */
+static int
+read_console (void)
+{
+ err_error_count = err_warning_count = 0;
+ err_already_flagged = 0;
+
+ fputs (getl_prompt ? get_cprompt() : get_prompt(), stdout);
+ ds_clear (&getl_buf);
+ if (ds_gets (&getl_buf, stdin))
+ return 1;
+
+ if (ferror (stdin))
+ msg (FE, "stdin: fgets(): %s.", strerror (errno));
+
+ return 0;
+}
+#endif /* no -lreadline */
+
+/* Closes all files. */
+void
+getl_close_all (void)
+{
+ while (getl_head)
+ getl_close_file ();
+}
+
+/* Sets the options flag of the current script to 0, thus allowing it
+ to be read in. Returns nonzero if this action was taken, zero
+ otherwise. */
+int
+getl_perform_delayed_reset (void)
+{
+ if (getl_head && getl_head->separate)
+ {
+ getl_head->separate = 0;
+ discard_variables ();
+ lex_reset_eof ();
+ return 1;
+ }
+ return 0;
+}
+
+/* Puts the current file and line number in *FN and *LN, respectively,
+ or NULL and -1 if none. */
+void
+getl_location (const char **fn, int *ln)
+{
+ if (fn != NULL)
+ *fn = getl_head ? getl_head->fn : NULL;
+ if (ln != NULL)
+ *ln = getl_head ? getl_head->ln : -1;
+}
--- /dev/null
+/* PSPP - computes sample statistics.
+ Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.
+ Written by Ben Pfaff <blp@gnu.org>.
+
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License as
+ published by the Free Software Foundation; either version 2 of the
+ License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+#if !getl_h
+#define getl_h 1
+
+#include <stdio.h>
+
+/* Defines a list of lines used by DO REPEAT. */
+/* Special case: if LEN is negative then it is a line number; in this
+ case LINE is a file name. This is used to allow errors to be
+ reported for the correct file and line number when DO REPEAT spans
+ files. */
+struct getl_line_list
+ {
+ char *line; /* Line contents. */
+ int len; /* Line length. */
+ struct getl_line_list *next; /* Next line. */
+ };
+
+/* Source file. */
+struct getl_script
+ {
+ struct getl_script *included_from; /* File that this is nested inside. */
+ struct getl_script *includes; /* File nested inside this file. */
+ struct getl_script *next; /* Next file in list. */
+ char *fn; /* Filename. */
+ int ln; /* Line number. */
+ int separate; /* !=0 means this is a separate job. */
+ FILE *f; /* File handle. */
+
+ /* Used only if F is NULL. Used for DO REPEAT. */
+ struct getl_line_list *first_line; /* First line in line buffer. */
+ struct getl_line_list *cur_line; /* Current line in line buffer. */
+ int remaining_loops; /* Number of remaining loops through LINES. */
+ int loop_index; /* Number of loops through LINES so far. */
+ void *macros; /* Pointer to macro table. */
+ int print; /* 1=Print lines as executed. */
+ };
+
+/* List of script files. */
+extern struct getl_script *getl_head; /* Current file. */
+extern struct getl_script *getl_tail; /* End of list. */
+
+/* If getl_head==0 and getl_interactive!=0, lines will be read from
+ the console rather than terminating. */
+extern int getl_interactive;
+
+/* 1=the welcome message has been printed. */
+extern int getl_welcomed;
+
+/* Prompt styles. */
+enum
+ {
+ GETL_PRPT_STANDARD, /* Just asks for a command. */
+ GETL_PRPT_CONTINUATION, /* Continuation lines for a single command. */
+ GETL_PRPT_DATA /* Between BEGIN DATA and END DATA. */
+ };
+
+/* Current mode. */
+enum
+ {
+ GETL_MODE_BATCH, /* Batch mode. */
+ GETL_MODE_INTERACTIVE /* Interactive mode. */
+ };
+
+/* One of GETL_MODE_*, representing the current mode. */
+extern int getl_mode;
+
+/* Current prompting style: one of GETL_PRPT_*. */
+extern int getl_prompt;
+
+/* Are we reading a script? Are we interactive? */
+#define getl_am_interactive (getl_head == NULL)
+#define getl_reading_script (getl_head != NULL)
+
+/* Current line. This line may be modified by modules other than
+ getl.c, and by lexer.c in particular. */
+extern struct string getl_buf;
+
+/* Name of the command history file. */
+#if HAVE_LIBREADLINE && HAVE_LIBHISTORY
+extern char *getl_history;
+#endif
+
+void getl_initialize (void);
+void getl_uninitialize (void);
+void getl_clear_include_path (void);
+char *getl_get_current_directory (void);
+void getl_add_include_dir (const char *);
+void getl_add_file (const char *fn, int separate, int where);
+void getl_include (const char *fn);
+int getl_read_line (void);
+void getl_close_file (void);
+void getl_close_all (void);
+int getl_perform_delayed_reset (void);
+void getl_add_DO_REPEAT_file (struct getl_script *);
+void getl_add_virtual_file (struct getl_script *);
+void getl_location (const char **, int *);
+
+#endif /* getl_h */
+++ /dev/null
-/* PSPP - computes sample statistics.
- Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.
- Written by Ben Pfaff <blp@gnu.org>.
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- 02110-1301, USA. */
-
-#include <config.h>
-#include "getline.h"
-#include "error.h"
-#include <stdio.h>
-#include <errno.h>
-#include <stdlib.h>
-#include "alloc.h"
-#include "command.h"
-#include "error.h"
-#include "filename.h"
-#include "lexer.h"
-#include "repeat.h"
-#include "settings.h"
-#include "str.h"
-#include "tab.h"
-#include "var.h"
-#include "version.h"
-
-/* Global variables. */
-struct string getl_buf;
-struct getl_script *getl_head;
-struct getl_script *getl_tail;
-int getl_interactive;
-int getl_welcomed;
-int getl_mode;
-int getl_prompt;
-
-#if HAVE_LIBREADLINE
-#include <readline/readline.h>
-#endif
-
-#if HAVE_LIBHISTORY
-static char *history_file;
-
-#if HAVE_READLINE_HISTORY_H
-#include <readline/history.h>
-#else /* no readline/history.h */
-extern void add_history (char *);
-extern void using_history (void);
-extern int read_history (char *);
-extern void stifle_history (int);
-extern int write_history (char *);
-#endif /* no readline/history.h */
-#endif /* -lhistory */
-
-
-extern struct cmd_set cmd;
-
-static struct string getl_include_path;
-
-/* Number of levels of DO REPEAT structures we're nested inside. If
- this is greater than zero then DO REPEAT macro substitutions are
- performed. */
-static int DO_REPEAT_level;
-
-static int read_console (void);
-
-/* Initialize getline. */
-void
-getl_initialize (void)
-{
- ds_create (&getl_include_path,
- fn_getenv_default ("STAT_INCLUDE_PATH", include_path));
- ds_init (&getl_buf, 256);
-#if HAVE_LIBREADLINE
- rl_completion_entry_function = pspp_completion_function;
-#endif
-}
-
-/* Close getline. */
-void
-getl_uninitialize (void)
-{
- getl_close_all();
-#if HAVE_LIBHISTORY && defined (unix)
- if (history_file)
- write_history (history_file);
-#endif
- ds_destroy (&getl_buf);
- ds_destroy (&getl_include_path);
-}
-
-/* Returns a string that represents the directory that the syntax file
- currently being read resides in. If there is no syntax file then
- returns the OS current working directory. Return value must be
- free()'d. */
-char *
-getl_get_current_directory (void)
-{
- return getl_head ? fn_dirname (getl_head->fn) : fn_get_cwd ();
-}
-
-/* Delete everything from the include path. */
-void
-getl_clear_include_path (void)
-{
- ds_clear (&getl_include_path);
-}
-
-/* Add to the include path. */
-void
-getl_add_include_dir (const char *path)
-{
- if (ds_length (&getl_include_path))
- ds_putc (&getl_include_path, PATH_DELIMITER);
-
- ds_puts (&getl_include_path, path);
-}
-
-/* Adds FN to the tail end of the list of script files to execute.
- OPTIONS is the value to stick in the options field of the
- getl_script struct. If WHERE is zero then the file is added after
- all other files; otherwise it is added before all other files (this
- can be done only if parsing has not yet begun). */
-void
-getl_add_file (const char *fn, int separate, int where)
-{
- struct getl_script *n = xmalloc (sizeof *n);
-
- assert (fn != NULL);
- n->next = NULL;
- if (getl_tail == NULL)
- getl_head = getl_tail = n;
- else if (!where)
- getl_tail = getl_tail->next = n;
- else
- {
- assert (getl_head->f == NULL);
- n->next = getl_head;
- getl_head = n;
- }
- n->included_from = n->includes = NULL;
- n->fn = xstrdup (fn);
- n->ln = 0;
- n->f = NULL;
- n->separate = separate;
- n->first_line = NULL;
-}
-
-/* Inserts the given file with filename FN into the current file after
- the current line. */
-void
-getl_include (const char *fn)
-{
- struct getl_script *n;
- char *real_fn;
-
- {
- char *cur_dir = getl_get_current_directory ();
- real_fn = fn_search_path (fn, ds_c_str (&getl_include_path), cur_dir);
- free (cur_dir);
- }
-
- if (!real_fn)
- {
- msg (SE, _("Can't find `%s' in include file search path."), fn);
- return;
- }
-
- if (!getl_head)
- {
- getl_add_file (real_fn, 0, 0);
- free (real_fn);
- }
- else
- {
- n = xmalloc (sizeof *n);
- n->included_from = getl_head;
- getl_head = getl_head->includes = n;
- n->includes = NULL;
- n->next = NULL;
- n->fn = real_fn;
- n->ln = 0;
- n->f = NULL;
- n->separate = 0;
- n->first_line = NULL;
- }
-}
-
-/* Add the virtual file FILE to the list of files to be processed.
- The first_line field in FILE must already have been initialized. */
-void
-getl_add_virtual_file (struct getl_script *file)
-{
- if (getl_tail == NULL)
- getl_head = getl_tail = file;
- else
- getl_tail = getl_tail->next = file;
- file->included_from = file->includes = NULL;
- file->next = NULL;
- file->fn = file->first_line->line;
- file->ln = -file->first_line->len - 1;
- file->separate = 0;
- file->f = NULL;
- file->cur_line = NULL;
- file->remaining_loops = 1;
- file->loop_index = -1;
- file->macros = NULL;
-}
-
-/* Causes the DO REPEAT virtual file passed in FILE to be included in
- the current file. The first_line, cur_line, remaining_loops,
- loop_index, and macros fields in FILE must already have been
- initialized. */
-void
-getl_add_DO_REPEAT_file (struct getl_script *file)
-{
- /* getl_head == NULL can't happen. */
- assert (getl_head);
-
- DO_REPEAT_level++;
- file->included_from = getl_head;
- getl_head = getl_head->includes = file;
- file->includes = NULL;
- file->next = NULL;
- assert (file->first_line->len < 0);
- file->fn = file->first_line->line;
- file->ln = -file->first_line->len - 1;
- file->separate = 0;
- file->f = NULL;
-}
-
-/* Display a welcoming message. */
-static void
-welcome (void)
-{
- getl_welcomed = 1;
- fputs ("PSPP is free software and you are welcome to distribute copies of "
- "it\nunder certain conditions; type \"show copying.\" to see the "
- "conditions.\nThere is ABSOLUTELY NO WARRANTY for PSPP; type \"show "
- "warranty.\" for details.\n", stdout);
- puts (stat_version);
-}
-
-/* Reads a single line from the user's terminal. */
-
-/* From repeat.c. */
-extern void perform_DO_REPEAT_substitutions (void);
-
-/* Reads a single line from the line buffer associated with getl_head.
- Returns 1 if a line was successfully read or 0 if no more lines are
- available. */
-static int
-handle_line_buffer (void)
-{
- struct getl_script *s = getl_head;
-
- /* Check that we're not all done. */
- do
- {
- if (s->cur_line == NULL)
- {
- s->loop_index++;
- if (s->remaining_loops-- == 0)
- return 0;
- s->cur_line = s->first_line;
- }
-
- if (s->cur_line->len < 0)
- {
- s->ln = -s->cur_line->len - 1;
- s->fn = s->cur_line->line;
- s->cur_line = s->cur_line->next;
- continue;
- }
- }
- while (s->cur_line == NULL);
-
- ds_concat (&getl_buf, s->cur_line->line, s->cur_line->len);
-
- /* Advance pointers. */
- s->cur_line = s->cur_line->next;
- s->ln++;
-
- return 1;
-}
-
-/* Reads a single line into getl_buf from the list of files. Will not
- read from the eof of one file to the beginning of another unless
- the options field on the new file's getl_script is nonzero. Return
- zero on eof. */
-int
-getl_read_line (void)
-{
- getl_mode = GETL_MODE_BATCH;
-
- while (getl_head)
- {
- struct getl_script *s = getl_head;
-
- ds_clear (&getl_buf);
- if (s->separate)
- return 0;
-
- if (s->first_line)
- {
- if (!handle_line_buffer ())
- {
- getl_close_file ();
- continue;
- }
- perform_DO_REPEAT_substitutions ();
- if (getl_head->print)
- tab_output_text (TAB_LEFT | TAT_FIX | TAT_PRINTF, "+%s",
- ds_c_str (&getl_buf));
- return 1;
- }
-
- if (s->f == NULL)
- {
- msg (VM (1), _("%s: Opening as syntax file."), s->fn);
- s->f = fn_open (s->fn, "r");
-
- if (s->f == NULL)
- {
- msg (ME, _("Opening `%s': %s."), s->fn, strerror (errno));
- getl_close_file ();
- continue;
- }
- }
-
- if (!ds_gets (&getl_buf, s->f))
- {
- if (ferror (s->f))
- msg (ME, _("Reading `%s': %s."), s->fn, strerror (errno));
- getl_close_file ();
- continue;
- }
- if (ds_length (&getl_buf) > 0 && ds_end (&getl_buf)[-1] == '\n')
- ds_truncate (&getl_buf, ds_length (&getl_buf) - 1);
-
- if (get_echo())
- tab_output_text (TAB_LEFT | TAT_FIX, ds_c_str (&getl_buf));
-
- getl_head->ln++;
-
- /* Allows shebang invocation: `#! /usr/local/bin/pspp'. */
- if (ds_c_str (&getl_buf)[0] == '#'
- && ds_c_str (&getl_buf)[1] == '!')
- continue;
-
- return 1;
- }
-
- if (getl_interactive == 0)
- return 0;
-
- getl_mode = GETL_MODE_INTERACTIVE;
-
- if (getl_welcomed == 0)
- welcome ();
-
- return read_console ();
-}
-
-/* Closes the current file, whether it be a main file or included
- file, then moves getl_head to the next file in the chain. */
-void
-getl_close_file (void)
-{
- struct getl_script *s = getl_head;
-
- if (!s)
- return;
- assert (getl_tail != NULL);
-
- if (s->first_line)
- {
- struct getl_line_list *cur, *next;
-
- s->fn = NULL; /* It will be freed below. */
- for (cur = s->first_line; cur; cur = next)
- {
- next = cur->next;
- free (cur->line);
- free (cur);
- }
-
- DO_REPEAT_level--;
- }
-
- if (s->f && EOF == fn_close (s->fn, s->f))
- msg (MW, _("Closing `%s': %s."), s->fn, strerror (errno));
- free (s->fn);
-
- if (s->included_from)
- {
- getl_head = s->included_from;
- getl_head->includes = NULL;
- }
- else
- {
- getl_head = s->next;
- if (NULL == getl_head)
- getl_tail = NULL;
- }
-
- free (s);
-}
-
-/* PORTME: Adapt to your local system's idea of the terminal. */
-#if HAVE_LIBREADLINE
-
-#if HAVE_READLINE_READLINE_H
-#include <readline/readline.h>
-#else /* no readline/readline.h */
-extern char *readline (char *);
-#endif /* no readline/readline.h */
-
-static int
-read_console (void)
-{
- char *line;
- char *prompt;
-
- err_error_count = err_warning_count = 0;
- err_already_flagged = 0;
-
-#if HAVE_LIBHISTORY
- if (!history_file)
- {
-#ifdef unix
- history_file = tilde_expand (HISTORY_FILE);
-#endif
- using_history ();
- read_history (history_file);
- stifle_history (MAX_HISTORY);
- }
-#endif /* -lhistory */
-
- switch (getl_prompt)
- {
- case GETL_PRPT_STANDARD:
- prompt = get_prompt();
- break;
-
- case GETL_PRPT_CONTINUATION:
- prompt = get_cprompt();
- break;
-
- case GETL_PRPT_DATA:
- prompt = get_dprompt();
- break;
-
- default:
- assert (0);
- abort ();
- }
-
- line = readline (prompt);
- if (!line)
- return 0;
-
-#if HAVE_LIBHISTORY
- if (*line)
- add_history (line);
-#endif
-
- ds_clear (&getl_buf);
- ds_puts (&getl_buf, line);
-
- free (line);
-
- return 1;
-}
-#else /* no -lreadline */
-static int
-read_console (void)
-{
- err_error_count = err_warning_count = 0;
- err_already_flagged = 0;
-
- fputs (getl_prompt ? get_cprompt() : get_prompt(), stdout);
- ds_clear (&getl_buf);
- if (ds_gets (&getl_buf, stdin))
- return 1;
-
- if (ferror (stdin))
- msg (FE, "stdin: fgets(): %s.", strerror (errno));
-
- return 0;
-}
-#endif /* no -lreadline */
-
-/* Closes all files. */
-void
-getl_close_all (void)
-{
- while (getl_head)
- getl_close_file ();
-}
-
-/* Sets the options flag of the current script to 0, thus allowing it
- to be read in. Returns nonzero if this action was taken, zero
- otherwise. */
-int
-getl_perform_delayed_reset (void)
-{
- if (getl_head && getl_head->separate)
- {
- getl_head->separate = 0;
- discard_variables ();
- lex_reset_eof ();
- return 1;
- }
- return 0;
-}
-
-/* Puts the current file and line number in *FN and *LN, respectively,
- or NULL and -1 if none. */
-void
-getl_location (const char **fn, int *ln)
-{
- if (fn != NULL)
- *fn = getl_head ? getl_head->fn : NULL;
- if (ln != NULL)
- *ln = getl_head ? getl_head->ln : -1;
-}
+++ /dev/null
-/* PSPP - computes sample statistics.
- Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.
- Written by Ben Pfaff <blp@gnu.org>.
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- 02110-1301, USA. */
-
-#if !getline_h
-#define getline_h 1
-
-#include <stdio.h>
-
-/* Defines a list of lines used by DO REPEAT. */
-/* Special case: if LEN is negative then it is a line number; in this
- case LINE is a file name. This is used to allow errors to be
- reported for the correct file and line number when DO REPEAT spans
- files. */
-struct getl_line_list
- {
- char *line; /* Line contents. */
- int len; /* Line length. */
- struct getl_line_list *next; /* Next line. */
- };
-
-/* Source file. */
-struct getl_script
- {
- struct getl_script *included_from; /* File that this is nested inside. */
- struct getl_script *includes; /* File nested inside this file. */
- struct getl_script *next; /* Next file in list. */
- char *fn; /* Filename. */
- int ln; /* Line number. */
- int separate; /* !=0 means this is a separate job. */
- FILE *f; /* File handle. */
-
- /* Used only if F is NULL. Used for DO REPEAT. */
- struct getl_line_list *first_line; /* First line in line buffer. */
- struct getl_line_list *cur_line; /* Current line in line buffer. */
- int remaining_loops; /* Number of remaining loops through LINES. */
- int loop_index; /* Number of loops through LINES so far. */
- void *macros; /* Pointer to macro table. */
- int print; /* 1=Print lines as executed. */
- };
-
-/* List of script files. */
-extern struct getl_script *getl_head; /* Current file. */
-extern struct getl_script *getl_tail; /* End of list. */
-
-/* If getl_head==0 and getl_interactive!=0, lines will be read from
- the console rather than terminating. */
-extern int getl_interactive;
-
-/* 1=the welcome message has been printed. */
-extern int getl_welcomed;
-
-/* Prompt styles. */
-enum
- {
- GETL_PRPT_STANDARD, /* Just asks for a command. */
- GETL_PRPT_CONTINUATION, /* Continuation lines for a single command. */
- GETL_PRPT_DATA /* Between BEGIN DATA and END DATA. */
- };
-
-/* Current mode. */
-enum
- {
- GETL_MODE_BATCH, /* Batch mode. */
- GETL_MODE_INTERACTIVE /* Interactive mode. */
- };
-
-/* One of GETL_MODE_*, representing the current mode. */
-extern int getl_mode;
-
-/* Current prompting style: one of GETL_PRPT_*. */
-extern int getl_prompt;
-
-/* Are we reading a script? Are we interactive? */
-#define getl_am_interactive (getl_head == NULL)
-#define getl_reading_script (getl_head != NULL)
-
-/* Current line. This line may be modified by modules other than
- getline.c, and by lexer.c in particular. */
-extern struct string getl_buf;
-
-/* Name of the command history file. */
-#if HAVE_LIBREADLINE && HAVE_LIBHISTORY
-extern char *getl_history;
-#endif
-
-void getl_initialize (void);
-void getl_uninitialize (void);
-void getl_clear_include_path (void);
-char *getl_get_current_directory (void);
-void getl_add_include_dir (const char *);
-void getl_add_file (const char *fn, int separate, int where);
-void getl_include (const char *fn);
-int getl_read_line (void);
-void getl_close_file (void);
-void getl_close_all (void);
-int getl_perform_delayed_reset (void);
-void getl_add_DO_REPEAT_file (struct getl_script *);
-void getl_add_virtual_file (struct getl_script *);
-void getl_location (const char **, int *);
-
-#endif /* getline_h */
#include <config.h>
#include "glob.h"
#include "error.h"
+#include "progname.h"
#include <stdlib.h>
#include <stdio.h>
-
-#if TIME_WITH_SYS_TIME
-#include <sys/time.h>
-#include <time.h>
-#else
-#if HAVE_SYS_TIME_H
-#include <sys/time.h>
-#else
#include <time.h>
-#endif
-#endif
#if HAVE_LIBHISTORY
#if HAVE_READLINE_HISTORY_H
#include "error.h"
#include "file-handle.h"
#include "filename.h"
-#include "getline.h"
+#include "getl.h"
#include "hash.h"
#include "lexer.h"
#include "magic.h"
#include "version.h"
#include "vfm.h"
+#include "gettext.h"
+
/* var.h */
struct dictionary *default_dict;
struct expression *process_if_expr;
void
init_glob (int argc UNUSED, char **argv)
{
+ set_program_name (argv[0]);
+
/* FIXME: Allow i18n of other locale items (besides LC_MESSAGES). */
#if ENABLE_NLS
#if HAVE_LC_MESSAGES
#include "alloc.h"
#include "error.h"
#include "filename.h"
+#include "getline.h"
#include "hash.h"
#include "pool.h"
#include "str.h"
#include "version.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
int font_number_to_index (int);
int space_index;
#include <stdlib.h>
#include "algorithm.h"
#include "alloc.h"
-#include "bool.h"
+#include <stdbool.h>
#include "misc.h"
#include "str.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Note for constructing hash functions:
You can store the hash values in the records, then compare hash
#include "alloc.h"
#include "error.h"
#include "filename.h"
+#include "getl.h"
#include "getline.h"
+#include "getlogin_r.h"
#include "output.h"
#include "som.h"
#include "tab.h"
#include "version.h"
#include "mkfile.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Prototypes. */
static int postopen (struct file_ext *);
static int preclose (struct file_ext *);
{"source-file", 0},
{0, 0},
};
-#if HAVE_UNISTD_H
- char host[128];
-#endif
+ char login[128], host[128];
time_t curtime;
struct tm *loctime;
*cp = 0;
}
- /* PORTME: Determine username, net address. */
-#if HAVE_UNISTD_H
- dict[2].value = getenv ("LOGNAME");
- if (!dict[2].value)
- dict[2].value = getlogin ();
- if (!dict[2].value)
- dict[2].value = _("nobody");
+ if (getenv ("LOGNAME") != NULL)
+ str_copy_rpad (login, sizeof login, getenv ("LOGNAME"));
+ else if (getlogin_r (login, sizeof login))
+ strcpy (login, _("nobody"));
+ dict[2].value = login;
+#ifdef HAVE_UNISTD_H
if (gethostname (host, 128) == -1)
{
if (errno == ENAMETOOLONG)
else
strcpy (host, _("nowhere"));
}
+#else
+ strcpy (host, _("nowhere"));
+#endif
dict[3].value = host;
-#else /* !HAVE_UNISTD_H */
- dict[2].value = _("nobody");
- dict[3].value = _("nowhere");
-#endif /* !HAVE_UNISTD_H */
dict[4].value = outp_title ? outp_title : "";
dict[5].value = outp_subtitle ? outp_subtitle : "";
#include "alloc.h"
#include "command.h"
#include "error.h"
-#include "getline.h"
+#include "getl.h"
#include "lexer.h"
#include "str.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
int
cmd_include (void)
{
#include "var.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Indicates how a `union value' should be initialized. */
#include "alloc.h"
#include "command.h"
#include "error.h"
-#include "getline.h"
+#include "getl.h"
#include "magic.h"
#include "settings.h"
#include "str.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
+
/*
#define DUMP_TOKENS 1
*/
#include "var.h"
#include <ctype.h>
-#include "bool.h"
+#include <stdbool.h>
/* Returns nonzero if character CH may be the first character in an
identifier. */
#include "var.h"
#include "vfm.h"
#include "format.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* (headers) */
#include "debug-print.h"
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* LOOP strategy:
#include "command.h"
#include "dictionary.h"
#include "error.h"
-#include "getline.h"
+#include "getl.h"
#include "glob.h"
#include "lexer.h"
#include "output.h"
#include "var.h"
#include <signal.h>
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include <stdlib.h>
#include "debug-print.h"
#include "var.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* FIXME: /N subcommand not implemented. It should be pretty simple,
#include "error.h"
#include "magic.h"
#include "var.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* (headers) */
#include "debug-print.h"
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Variables on MIS VAL. */
#include <string.h>
#include <errno.h>
#include <stdio.h>
-
#include "mkfile.h"
#include "error.h"
#include "alloc.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Creates a temporary file and stores its name in *FILENAME and
a file descriptor for it in *FD. Returns success. Caller is
responsible for freeing *FILENAME. */
#include "var.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* FIXME: should change weighting variable, etc. */
/* These control the ordering produced by
compare_variables_given_ordering(). */
#include "alloc.h"
#include "misc.h"
#include "val.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
\f
/* Calculates variance, skewness, and kurtosis into *VARIANCE,
*SKEWNESS, and *KURTOSIS if they are non-null and not greater
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Parses the NUMERIC command. */
#include "group_proc.h"
#include "group.h"
#include "levene.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* (headers) */
/* (specification)
#include "settings.h"
#include "str.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* FIXME? Should the output configuration format be changed to
drivername:classname:devicetype:options, where devicetype is zero
or more of screen, printer, listing? */
#include "percentiles.h"
#include "misc.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+#define N_(msgid) msgid
+
#include <assert.h>
#include <sys/stat.h>
#include <unistd.h>
#include <errno.h>
-
#include "settings.h"
#include "command.h"
#include "error.h"
#include "lexer.h"
#include "misc.h"
+#include "stat-macros.h"
#include "str.h"
-
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
enum PER {PER_RO, PER_RW};
#include <math.h>
#include <setjmp.h>
#include "alloc.h"
-#include "bool.h"
+#include <stdbool.h>
#include "case.h"
#include "dictionary.h"
#include "file-handle.h"
#include "format.h"
-#include "getline.h"
+#include "getl.h"
#include "hash.h"
#include "magic.h"
#include "misc.h"
#include "value-labels.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Portable file reader. */
/* Portable file reading. */
-#include "bool.h"
+#include <stdbool.h>
/* Portable file types. */
enum pfm_type
#include "var.h"
#include "version.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Portable file writer. */
#include <gsl/gsl_histogram.h>
#include <gsl/gsl_randist.h>
#include <assert.h>
-
#include "hash.h"
-
#include "var.h"
#include "chart.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Write the legend of the chart */
void
histogram_write_legend(struct chart *ch, const struct normal_curve *norm)
#include <errno.h>
#include <limits.h>
#include <stdlib.h>
+#include <time.h>
#if HAVE_UNISTD_H
#include <unistd.h>
#endif
-#if TIME_WITH_SYS_TIME
-#include <sys/time.h>
-#include <time.h>
-#else
-#if HAVE_SYS_TIME_H
-#include <sys/time.h>
-#else
-#include <time.h>
-#endif
-#endif
-
#include "alloc.h"
#include "bitvector.h"
#include "error.h"
#include "filename.h"
#include "font.h"
+#include "getl.h"
#include "getline.h"
#include "hash.h"
#include "main.h"
#include "som.h"
#include "version.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* FIXMEs:
optimize-text-size not implemented.
#include "tab.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Describes what to do when an output field is encountered. */
enum
{
dump (0, "#include \"str.h\"");
dump (0, "#include \"subclist.h\"");
dump (0, "#include \"var.h\"");
+ dump (0, nullstr);
+ dump (0, "#include \"gettext.h\"");
+ dump (0, "#define _(msgid) gettext (msgid)");
dump (0, nullstr);
}
else if (!strcmp (directive, "declarations"))
#include "sort-prs.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* (headers) */
/* (specification)
#include "magic.h"
#include "str.h"
#include "var.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
\f
/* Definitions. */
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* The code for this function is very similar to the code for the
RENAME subcommand of MODIFY VARS. */
int
#include "command.h"
#include "dictionary.h"
#include "error.h"
-#include "getline.h"
+#include "getl.h"
#include "lexer.h"
#include "misc.h"
#include "settings.h"
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Describes one DO REPEAT macro. */
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* The two different types of samples. */
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* SELECT IF transformation. */
struct select_if_trns
{
#endif /* !HAVE_TERMCAP_H */
#endif /* !HAVE_LIBTERMCAP */
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
static int set_errors;
static int set_messages;
static int set_results;
#include "file-handle.h"
#include "filename.h"
#include "format.h"
-#include "getline.h"
+#include "getl.h"
#include "hash.h"
#include "magic.h"
#include "misc.h"
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* System file reader. */
*b = t;
}
-/* bswap_int32(): Reverse the byte order of 32-bit integer *X. */
+/* Reverse the byte order of 32-bit integer *X. */
static inline void
bswap_int32 (int32 *x_)
{
#include "dictionary.h"
#include "error.h"
#include "file-handle.h"
-#include "getline.h"
+#include "getl.h"
#include "hash.h"
#include "magic.h"
#include "misc.h"
#include "var.h"
#include "version.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Compression bias used by PSPP. Values between (1 -
desired, and in fact almost every operation performed by som may be
overridden in a table class. */
-#include "bool.h"
+#include <stdbool.h>
enum som_type
{
#include <sys/types.h>
#include <assert.h>
#include <stdlib.h>
-
#include "alloc.h"
#include "error.h"
#include "lexer.h"
#include "sort.h"
#include "var.h"
-
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
static bool is_terminator(int tok, const int *terminators);
#define SORT_PRS_H
#include <config.h>
-#include "bool.h"
+#include <stdbool.h>
struct variable;
struct dictionary;
#include <errno.h>
#include "algorithm.h"
#include "alloc.h"
-#include "bool.h"
+#include <stdbool.h>
#include "case.h"
#include "casefile.h"
#include "command.h"
#include "vfm.h"
#include "vfmP.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* These should only be changed for testing purposes. */
#define sort_h 1
#include <stddef.h>
-#include "bool.h"
+#include <stdbool.h>
struct casereader;
struct dictionary;
+++ /dev/null
-/* PSPP - computes sample statistics.
- Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.
- Written by Ben Pfaff <blp@gnu.org>.
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- 02110-1301, USA. */
-
-#include <sys/stat.h>
-
-#ifdef STAT_MACROS_BROKEN
-#undef S_ISBLK
-#undef S_ISCHR
-#undef S_ISDIR
-#undef S_ISFIFO
-#undef S_ISLNK
-#undef S_ISMPB
-#undef S_ISMPC
-#undef S_ISNWK
-#undef S_ISREG
-#undef S_ISSOCK
-#endif /* STAT_MACROS_BROKEN. */
-
-#if !defined(S_ISBLK) && defined(S_IFBLK)
-#define S_ISBLK(m) (((m) & S_IFMT) == S_IFBLK)
-#endif
-#if !defined(S_ISCHR) && defined(S_IFCHR)
-#define S_ISCHR(m) (((m) & S_IFMT) == S_IFCHR)
-#endif
-#if !defined(S_ISDIR) && defined(S_IFDIR)
-#define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR)
-#endif
-#if !defined(S_ISREG) && defined(S_IFREG)
-#define S_ISREG(m) (((m) & S_IFMT) == S_IFREG)
-#endif
-#if !defined(S_ISFIFO) && defined(S_IFIFO)
-#define S_ISFIFO(m) (((m) & S_IFMT) == S_IFIFO)
-#endif
-#if !defined(S_ISLNK) && defined(S_IFLNK)
-#define S_ISLNK(m) (((m) & S_IFMT) == S_IFLNK)
-#endif
-#if !defined(S_ISSOCK) && defined(S_IFSOCK)
-#define S_ISSOCK(m) (((m) & S_IFMT) == S_IFSOCK)
-#endif
-#if !defined(S_ISMPB) && defined(S_IFMPB) /* V7 */
-#define S_ISMPB(m) (((m) & S_IFMT) == S_IFMPB)
-#define S_ISMPC(m) (((m) & S_IFMT) == S_IFMPC)
-#endif
-#if !defined(S_ISNWK) && defined(S_IFNWK) /* HP/UX */
-#define S_ISNWK(m) (((m) & S_IFMT) == S_IFNWK)
-#endif
-#if !defined(HAVE_MKFIFO)
-#define mkfifo(path, mode) (mknod ((path), (mode) | S_IFIFO, 0))
-#endif
#include <stdarg.h>
#include <stdio.h>
-
-#if STDC_HEADERS
- #include <string.h>
-#else
- #ifndef HAVE_STRCHR
- #define strchr index
- #define strrchr rindex
- #endif
-
- char *strchr (), *strrchr ();
-#endif
-
-#if !HAVE_STRTOK_R
- char *strtok_r (char *, const char *, char **);
-#endif
-
-#if !HAVE_STPCPY
- char *stpcpy (char *dest, const char *src);
-#endif
-
-#if !HAVE_STRCASECMP
- int strcasecmp (const char *s1, const char *s2);
-#endif
-
-#if !HAVE_STRNCASECMP
- int strncasecmp (const char *s1, const char *s2, size_t n);
+#include <string.h>
+
+#include "memmem.h"
+#include "snprintf.h"
+#include "stpcpy.h"
+#include "strcase.h"
+#include "strftime.h"
+#include "strstr.h"
+#include "strtok_r.h"
+#include "vsnprintf.h"
+
+#ifndef HAVE_STRCHR
+#define strchr index
#endif
-
-#if !HAVE_MEMMEM
- void *memmem (const void *haystack, size_t haystack_len,
- const void *needle, size_t needle_len);
+#ifndef HAVE_STRRCHR
+#define strrchr rindex
#endif
\f
/* sprintf() wrapper functions for convenience. */
int nvsprintf (char *buf, const char *format, va_list args);
#endif /* Not good sprintf(). */
#endif /* Not GNU C. */
-
-#if !HAVE_GETLINE
-long getline (char **lineptr, size_t *n, FILE *stream);
-#endif
-
-#if !HAVE_GETDELIM
-long getdelim (char **lineptr, size_t * n, int delimiter, FILE * stream);
-#endif
\f
/* Miscellaneous. */
#include "value-labels.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Constants for DISPLAY utility. */
enum
{
#include "group_proc.h"
#include "casefile.h"
#include "levene.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* (headers) */
/* (specification)
#include "som.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
\f
struct som_table_class tab_table_class;
#include "value-labels.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
int temporary;
struct dictionary *temp_dict;
int temp_trns;
#include "version.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
static int get_title (const char *cmd, char **title);
#include "str.h"
#include "value-labels.h"
#include "var.h"
+
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
\f
/* Declarations. */
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
int
#include <stddef.h>
#include "config.h"
-#include "bool.h"
+#include <stdbool.h>
#include "format.h"
#include "val.h"
#include "value-labels.h"
#include "vfm.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
#include "debug-print.h"
/* Assign auxiliary data AUX to variable V, which must not
#include "misc.h"
#include "str.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* Parses a name as a variable within VS and returns the
variable's index if successful. On failure emits an error
message and returns a null pointer. */
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
int
cmd_vector (void)
{
#include "var.h"
#include "value-labels.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/*
Virtual File Manager (vfm):
#include "str.h"
#include "var.h"
+#include "gettext.h"
+#define _(msgid) gettext (msgid)
+
/* WEIGHT transformation. */
struct weight_trns
{
projects / pspp-builds.git / commitdiff