1 @c PSPP - a program for statistical analysis.
2 @c Copyright (C) 2017, 2020 Free Software Foundation, Inc.
3 @c Permission is granted to copy, distribute and/or modify this document
4 @c under the terms of the GNU Free Documentation License, Version 1.3
5 @c or any later version published by the Free Software Foundation;
6 @c with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
7 @c A copy of the license is included in the section entitled "GNU
8 @c Free Documentation License".
13 This chapter documents the statistical procedures that @pspp{} supports so
17 * DESCRIPTIVES:: Descriptive statistics.
18 * FREQUENCIES:: Frequency tables.
19 * EXAMINE:: Testing data for normality.
21 * CORRELATIONS:: Correlation tables.
22 * CROSSTABS:: Crosstabulation tables.
23 * CTABLES:: Custom tables.
24 * FACTOR:: Factor analysis and Principal Components analysis.
25 * GLM:: Univariate Linear Models.
26 * LOGISTIC REGRESSION:: Bivariate Logistic Regression.
27 * MEANS:: Average values and other statistics.
28 * NPAR TESTS:: Nonparametric tests.
29 * T-TEST:: Test hypotheses about means.
30 * ONEWAY:: One way analysis of variance.
31 * QUICK CLUSTER:: K-Means clustering.
32 * RANK:: Compute rank scores.
33 * RELIABILITY:: Reliability analysis.
34 * ROC:: Receiver Operating Characteristic.
43 /VARIABLES=@var{var_list}
44 /MISSING=@{VARIABLE,LISTWISE@} @{INCLUDE,NOINCLUDE@}
45 /FORMAT=@{LABELS,NOLABELS@} @{NOINDEX,INDEX@} @{LINE,SERIAL@}
47 /STATISTICS=@{ALL,MEAN,SEMEAN,STDDEV,VARIANCE,KURTOSIS,
48 SKEWNESS,RANGE,MINIMUM,MAXIMUM,SUM,DEFAULT,
49 SESKEWNESS,SEKURTOSIS@}
50 /SORT=@{NONE,MEAN,SEMEAN,STDDEV,VARIANCE,KURTOSIS,SKEWNESS,
51 RANGE,MINIMUM,MAXIMUM,SUM,SESKEWNESS,SEKURTOSIS,NAME@}
55 The @cmd{DESCRIPTIVES} procedure reads the active dataset and outputs
56 linear descriptive statistics requested by the user. In addition, it can optionally
59 The @subcmd{VARIABLES} subcommand, which is required, specifies the list of
60 variables to be analyzed. Keyword @subcmd{VARIABLES} is optional.
62 All other subcommands are optional:
64 The @subcmd{MISSING} subcommand determines the handling of missing variables. If
65 @subcmd{INCLUDE} is set, then user-missing values are included in the
66 calculations. If @subcmd{NOINCLUDE} is set, which is the default, user-missing
67 values are excluded. If @subcmd{VARIABLE} is set, then missing values are
68 excluded on a variable by variable basis; if @subcmd{LISTWISE} is set, then
69 the entire case is excluded whenever any value in that case has a
70 system-missing or, if @subcmd{INCLUDE} is set, user-missing value.
72 The @subcmd{FORMAT} subcommand has no effect. It is accepted for
73 backward compatibility.
75 The @subcmd{SAVE} subcommand causes @cmd{DESCRIPTIVES} to calculate Z scores for all
76 the specified variables. The Z scores are saved to new variables.
77 Variable names are generated by trying first the original variable name
78 with Z prepended and truncated to a maximum of 8 characters, then the
79 names ZSC000 through ZSC999, STDZ00 through STDZ09, ZZZZ00 through
80 ZZZZ09, ZQZQ00 through ZQZQ09, in that sequence. In addition, Z score
81 variable names can be specified explicitly on @subcmd{VARIABLES} in the variable
82 list by enclosing them in parentheses after each variable.
83 When Z scores are calculated, @pspp{} ignores @cmd{TEMPORARY},
84 treating temporary transformations as permanent.
86 The @subcmd{STATISTICS} subcommand specifies the statistics to be displayed:
90 All of the statistics below.
94 Standard error of the mean.
97 @item @subcmd{VARIANCE}
99 @item @subcmd{KURTOSIS}
100 Kurtosis and standard error of the kurtosis.
101 @item @subcmd{SKEWNESS}
102 Skewness and standard error of the skewness.
112 Mean, standard deviation of the mean, minimum, maximum.
114 Standard error of the kurtosis.
116 Standard error of the skewness.
119 The @subcmd{SORT} subcommand specifies how the statistics should be sorted. Most
120 of the possible values should be self-explanatory. @subcmd{NAME} causes the
121 statistics to be sorted by name. By default, the statistics are listed
122 in the order that they are specified on the @subcmd{VARIABLES} subcommand.
123 The @subcmd{A} and @subcmd{D} settings request an ascending or descending
124 sort order, respectively.
126 @subsection Descriptives Example
128 The @file{physiology.sav} file contains various physiological data for a sample
129 of persons. Running the @cmd{DESCRIPTIVES} command on the variables @exvar{height}
130 and @exvar{temperature} with the default options allows one to see simple linear
131 statistics for these two variables. In @ref{descriptives:ex}, these variables
132 are specfied on the @subcmd{VARIABLES} subcommand and the @subcmd{SAVE} option
133 has been used, to request that Z scores be calculated.
135 After the command has completed, this example runs @cmd{DESCRIPTIVES} again, this
136 time on the @exvar{zheight} and @exvar{ztemperature} variables,
137 which are the two normalized (Z-score) variables generated by the
138 first @cmd{DESCRIPTIVES} command.
140 @float Example, descriptives:ex
141 @psppsyntax {descriptives.sps}
142 @caption {Running two @cmd{DESCRIPTIVES} commands, one with the @subcmd{SAVE} subcommand}
145 @float Screenshot, descriptives:scr
146 @psppimage {descriptives}
147 @caption {The Descriptives dialog box with two variables and Z-Scores option selected}
150 In @ref{descriptives:res}, we can see that there are 40 valid data for each of the variables
151 and no missing values. The mean average of the height and temperature is 16677.12
152 and 37.02 respectively. The descriptive statistics for temperature seem reasonable.
153 However there is a very high standard deviation for @exvar{height} and a suspiciously
154 low minimum. This is due to a data entry error in the
155 data (@pxref{Identifying incorrect data}).
157 In the second Descriptive Statistics command, one can see that the mean and standard
158 deviation of both Z score variables is 0 and 1 respectively. All Z score statistics
159 should have these properties since they are normalized versions of the original scores.
161 @float Result, descriptives:res
162 @psppoutput {descriptives}
163 @caption {Descriptives statistics including two normalized variables (Z-scores)}
172 /VARIABLES=@var{var_list}
173 /FORMAT=@{TABLE,NOTABLE,LIMIT(@var{limit})@}
174 @{AVALUE,DVALUE,AFREQ,DFREQ@}
175 /MISSING=@{EXCLUDE,INCLUDE@}
176 /STATISTICS=@{DEFAULT,MEAN,SEMEAN,MEDIAN,MODE,STDDEV,VARIANCE,
177 KURTOSIS,SKEWNESS,RANGE,MINIMUM,MAXIMUM,SUM,
178 SESKEWNESS,SEKURTOSIS,ALL,NONE@}
180 /PERCENTILES=percent@dots{}
181 /HISTOGRAM=[MINIMUM(@var{x_min})] [MAXIMUM(@var{x_max})]
182 [@{FREQ[(@var{y_max})],PERCENT[(@var{y_max})]@}] [@{NONORMAL,NORMAL@}]
183 /PIECHART=[MINIMUM(@var{x_min})] [MAXIMUM(@var{x_max})]
184 [@{FREQ,PERCENT@}] [@{NOMISSING,MISSING@}]
185 /BARCHART=[MINIMUM(@var{x_min})] [MAXIMUM(@var{x_max})]
187 /ORDER=@{ANALYSIS,VARIABLE@}
190 (These options are not currently implemented.)
195 The @cmd{FREQUENCIES} procedure outputs frequency tables for specified
197 @cmd{FREQUENCIES} can also calculate and display descriptive statistics
198 (including median and mode) and percentiles, and various graphical representations
199 of the frequency distribution.
201 The @subcmd{VARIABLES} subcommand is the only required subcommand. Specify the
202 variables to be analyzed.
204 The @subcmd{FORMAT} subcommand controls the output format. It has several
209 @subcmd{TABLE}, the default, causes a frequency table to be output for every
210 variable specified. @subcmd{NOTABLE} prevents them from being output. @subcmd{LIMIT}
211 with a numeric argument causes them to be output except when there are
212 more than the specified number of values in the table.
215 Normally frequency tables are sorted in ascending order by value. This
216 is @subcmd{AVALUE}. @subcmd{DVALUE} tables are sorted in descending order by value.
217 @subcmd{AFREQ} and @subcmd{DFREQ} tables are sorted in ascending and descending order,
218 respectively, by frequency count.
221 The @subcmd{MISSING} subcommand controls the handling of user-missing values.
222 When @subcmd{EXCLUDE}, the default, is set, user-missing values are not included
223 in frequency tables or statistics. When @subcmd{INCLUDE} is set, user-missing
224 are included. System-missing values are never included in statistics,
225 but are listed in frequency tables.
227 The available @subcmd{STATISTICS} are the same as available
228 in @cmd{DESCRIPTIVES} (@pxref{DESCRIPTIVES}), with the addition
229 of @subcmd{MEDIAN}, the data's median
230 value, and MODE, the mode. (If there are multiple modes, the smallest
231 value is reported.) By default, the mean, standard deviation of the
232 mean, minimum, and maximum are reported for each variable.
235 @subcmd{PERCENTILES} causes the specified percentiles to be reported.
236 The percentiles should be presented at a list of numbers between 0
238 The @subcmd{NTILES} subcommand causes the percentiles to be reported at the
239 boundaries of the data set divided into the specified number of ranges.
240 For instance, @subcmd{/NTILES=4} would cause quartiles to be reported.
243 The @subcmd{HISTOGRAM} subcommand causes the output to include a histogram for
244 each specified numeric variable. The X axis by default ranges from
245 the minimum to the maximum value observed in the data, but the @subcmd{MINIMUM}
246 and @subcmd{MAXIMUM} keywords can set an explicit range.
247 @footnote{The number of
248 bins is chosen according to the Freedman-Diaconis rule:
249 @math{2 \times IQR(x)n^{-1/3}}, where @math{IQR(x)} is the interquartile range of @math{x}
250 and @math{n} is the number of samples. Note that
251 @cmd{EXAMINE} uses a different algorithm to determine bin sizes.}
252 Histograms are not created for string variables.
254 Specify @subcmd{NORMAL} to superimpose a normal curve on the
258 The @subcmd{PIECHART} subcommand adds a pie chart for each variable to the data. Each
259 slice represents one value, with the size of the slice proportional to
260 the value's frequency. By default, all non-missing values are given
262 The @subcmd{MINIMUM} and @subcmd{MAXIMUM} keywords can be used to limit the
263 displayed slices to a given range of values.
264 The keyword @subcmd{NOMISSING} causes missing values to be omitted from the
265 piechart. This is the default.
266 If instead, @subcmd{MISSING} is specified, then the pie chart includes
267 a single slice representing all system missing and user-missing cases.
270 The @subcmd{BARCHART} subcommand produces a bar chart for each variable.
271 The @subcmd{MINIMUM} and @subcmd{MAXIMUM} keywords can be used to omit
272 categories whose counts which lie outside the specified limits.
273 The @subcmd{FREQ} option (default) causes the ordinate to display the frequency
274 of each category, whereas the @subcmd{PERCENT} option displays relative
277 The @subcmd{FREQ} and @subcmd{PERCENT} options on @subcmd{HISTOGRAM} and
278 @subcmd{PIECHART} are accepted but not currently honoured.
280 The @subcmd{ORDER} subcommand is accepted but ignored.
282 @subsection Frequencies Example
284 @ref{frequencies:ex} runs a frequency analysis on the @exvar{sex}
285 and @exvar{occupation} variables from the @file{personnel.sav} file.
286 This is useful to get an general idea of the way in which these nominal
287 variables are distributed.
289 @float Example, frequencies:ex
290 @psppsyntax {frequencies.sps}
291 @caption {Running frequencies on the @exvar{sex} and @exvar{occupation} variables}
294 If you are using the graphic user interface, the dialog box is set up such that
295 by default, several statistics are calculated. Some are not particularly useful
296 for categorical variables, so you may want to disable those.
298 @float Screenshot, frequencies:scr
299 @psppimage {frequencies}
300 @caption {The frequencies dialog box with the @exvar{sex} and @exvar{occupation} variables selected}
303 From @ref{frequencies:res} it is evident that there are 33 males, 21 females and
304 2 persons for whom their sex has not been entered.
306 One can also see how many of each occupation there are in the data.
307 When dealing with string variables used as nominal values, running a frequency
308 analysis is useful to detect data input entries. Notice that
309 one @exvar{occupation} value has been mistyped as ``Scrientist''. This entry should
310 be corrected, or marked as missing before using the data.
312 @float Result, frequencies:res
313 @psppoutput {frequencies}
314 @caption {The relative frequencies of @exvar{sex} and @exvar{occupation}}
321 @cindex Exploratory data analysis
322 @cindex normality, testing
326 VARIABLES= @var{var1} [@var{var2}] @dots{} [@var{varN}]
327 [BY @var{factor1} [BY @var{subfactor1}]
328 [ @var{factor2} [BY @var{subfactor2}]]
330 [ @var{factor3} [BY @var{subfactor3}]]
332 /STATISTICS=@{DESCRIPTIVES, EXTREME[(@var{n})], ALL, NONE@}
333 /PLOT=@{BOXPLOT, NPPLOT, HISTOGRAM, SPREADLEVEL[(@var{t})], ALL, NONE@}
335 /COMPARE=@{GROUPS,VARIABLES@}
336 /ID=@var{identity_variable}
338 /PERCENTILE=[@var{percentiles}]=@{HAVERAGE, WAVERAGE, ROUND, AEMPIRICAL, EMPIRICAL @}
339 /MISSING=@{LISTWISE, PAIRWISE@} [@{EXCLUDE, INCLUDE@}]
340 [@{NOREPORT,REPORT@}]
344 The @cmd{EXAMINE} command is used to perform exploratory data analysis.
345 In particular, it is useful for testing how closely a distribution follows a
346 normal distribution, and for finding outliers and extreme values.
348 The @subcmd{VARIABLES} subcommand is mandatory.
349 It specifies the dependent variables and optionally variables to use as
350 factors for the analysis.
351 Variables listed before the first @subcmd{BY} keyword (if any) are the
353 The dependent variables may optionally be followed by a list of
354 factors which tell @pspp{} how to break down the analysis for each
357 Following the dependent variables, factors may be specified.
358 The factors (if desired) should be preceded by a single @subcmd{BY} keyword.
359 The format for each factor is
361 @var{factorvar} [BY @var{subfactorvar}].
363 Each unique combination of the values of @var{factorvar} and
364 @var{subfactorvar} divide the dataset into @dfn{cells}.
365 Statistics are calculated for each cell
366 and for the entire dataset (unless @subcmd{NOTOTAL} is given).
368 The @subcmd{STATISTICS} subcommand specifies which statistics to show.
369 @subcmd{DESCRIPTIVES} produces a table showing some parametric and
370 non-parametrics statistics.
371 @subcmd{EXTREME} produces a table showing the extremities of each cell.
372 A number in parentheses, @var{n} determines
373 how many upper and lower extremities to show.
374 The default number is 5.
376 The subcommands @subcmd{TOTAL} and @subcmd{NOTOTAL} are mutually exclusive.
377 If @subcmd{TOTAL} appears, then statistics for the entire dataset
378 as well as for each cell are produced.
379 If @subcmd{NOTOTAL} appears, then statistics are produced only for the cells
380 (unless no factor variables have been given).
381 These subcommands have no effect if there have been no factor variables
387 @cindex spreadlevel plot
388 The @subcmd{PLOT} subcommand specifies which plots are to be produced if any.
389 Available plots are @subcmd{HISTOGRAM}, @subcmd{NPPLOT}, @subcmd{BOXPLOT} and
390 @subcmd{SPREADLEVEL}.
391 The first three can be used to visualise how closely each cell conforms to a
392 normal distribution, whilst the spread vs.@: level plot can be useful to visualise
393 how the variance differs between factors.
394 Boxplots show you the outliers and extreme values.
395 @footnote{@subcmd{HISTOGRAM} uses Sturges' rule to determine the number of
396 bins, as approximately @math{1 + \log2(n)}, where @math{n} is the number of samples.
397 Note that @cmd{FREQUENCIES} uses a different algorithm to find the bin size.}
399 The @subcmd{SPREADLEVEL} plot displays the interquartile range versus the
400 median. It takes an optional parameter @var{t}, which specifies how the data
401 should be transformed prior to plotting.
402 The given value @var{t} is a power to which the data are raised. For example, if
403 @var{t} is given as 2, then the square of the data is used.
404 Zero, however is a special value. If @var{t} is 0 or
405 is omitted, then data are transformed by taking its natural logarithm instead of
406 raising to the power of @var{t}.
409 When one or more plots are requested, @subcmd{EXAMINE} also performs the
410 Shapiro-Wilk test for each category.
411 There are however a number of provisos:
413 @item All weight values must be integer.
414 @item The cumulative weight value must be in the range [3, 5000]
417 The @subcmd{COMPARE} subcommand is only relevant if producing boxplots, and it is only
418 useful there is more than one dependent variable and at least one factor.
420 @subcmd{/COMPARE=GROUPS} is specified, then one plot per dependent variable is produced,
421 each of which contain boxplots for all the cells.
422 If @subcmd{/COMPARE=VARIABLES} is specified, then one plot per cell is produced,
423 each containing one boxplot per dependent variable.
424 If the @subcmd{/COMPARE} subcommand is omitted, then @pspp{} behaves as if
425 @subcmd{/COMPARE=GROUPS} were given.
427 The @subcmd{ID} subcommand is relevant only if @subcmd{/PLOT=BOXPLOT} or
428 @subcmd{/STATISTICS=EXTREME} has been given.
429 If given, it should provide the name of a variable which is to be used
430 to labels extreme values and outliers.
431 Numeric or string variables are permissible.
432 If the @subcmd{ID} subcommand is not given, then the case number is used for
435 The @subcmd{CINTERVAL} subcommand specifies the confidence interval to use in
436 calculation of the descriptives command. The default is 95%.
439 The @subcmd{PERCENTILES} subcommand specifies which percentiles are to be calculated,
440 and which algorithm to use for calculating them. The default is to
441 calculate the 5, 10, 25, 50, 75, 90, 95 percentiles using the
442 @subcmd{HAVERAGE} algorithm.
444 The @subcmd{TOTAL} and @subcmd{NOTOTAL} subcommands are mutually exclusive. If @subcmd{NOTOTAL}
445 is given and factors have been specified in the @subcmd{VARIABLES} subcommand,
446 then statistics for the unfactored dependent variables are
447 produced in addition to the factored variables. If there are no
448 factors specified then @subcmd{TOTAL} and @subcmd{NOTOTAL} have no effect.
451 The following example generates descriptive statistics and histograms for
452 two variables @var{score1} and @var{score2}.
453 Two factors are given, @i{viz}: @var{gender} and @var{gender} BY @var{culture}.
454 Therefore, the descriptives and histograms are generated for each
456 of @var{gender} @emph{and} for each distinct combination of the values
457 of @var{gender} and @var{race}.
458 Since the @subcmd{NOTOTAL} keyword is given, statistics and histograms for
459 @var{score1} and @var{score2} covering the whole dataset are not produced.
461 EXAMINE @var{score1} @var{score2} BY
463 @var{gender} BY @var{culture}
464 /STATISTICS = DESCRIPTIVES
469 Here is a second example showing how the @cmd{examine} command can be used to find extremities.
471 EXAMINE @var{height} @var{weight} BY
473 /STATISTICS = EXTREME (3)
478 In this example, we look at the height and weight of a sample of individuals and
479 how they differ between male and female.
480 A table showing the 3 largest and the 3 smallest values of @exvar{height} and
481 @exvar{weight} for each gender, and for the whole dataset as are shown.
482 In addition, the @subcmd{/PLOT} subcommand requests boxplots.
483 Because @subcmd{/COMPARE = GROUPS} was specified, boxplots for male and female are
484 shown in juxtaposed in the same graphic, allowing us to easily see the difference between
486 Since the variable @var{name} was specified on the @subcmd{ID} subcommand,
487 values of the @var{name} variable are used to label the extreme values.
490 If you specify many dependent variables or factor variables
491 for which there are many distinct values, then @cmd{EXAMINE} will produce a very
492 large quantity of output.
498 @cindex Exploratory data analysis
499 @cindex normality, testing
503 /HISTOGRAM [(NORMAL)]= @var{var}
504 /SCATTERPLOT [(BIVARIATE)] = @var{var1} WITH @var{var2} [BY @var{var3}]
505 /BAR = @{@var{summary-function}(@var{var1}) | @var{count-function}@} BY @var{var2} [BY @var{var3}]
506 [ /MISSING=@{LISTWISE, VARIABLE@} [@{EXCLUDE, INCLUDE@}] ]
507 [@{NOREPORT,REPORT@}]
511 The @cmd{GRAPH} command produces graphical plots of data. Only one of the subcommands
512 @subcmd{HISTOGRAM}, @subcmd{BAR} or @subcmd{SCATTERPLOT} can be specified, @i{i.e.} only one plot
513 can be produced per call of @cmd{GRAPH}. The @subcmd{MISSING} is optional.
516 * SCATTERPLOT:: Cartesian Plots
517 * HISTOGRAM:: Histograms
518 * BAR CHART:: Bar Charts
522 @subsection Scatterplot
525 The subcommand @subcmd{SCATTERPLOT} produces an xy plot of the
527 @cmd{GRAPH} uses the third variable @var{var3}, if specified, to determine
528 the colours and/or markers for the plot.
529 The following is an example for producing a scatterplot.
533 /SCATTERPLOT = @var{height} WITH @var{weight} BY @var{gender}.
536 This example produces a scatterplot where @var{height} is plotted versus @var{weight}. Depending
537 on the value of the @var{gender} variable, the colour of the datapoint is different. With
538 this plot it is possible to analyze gender differences for @var{height} versus @var{weight} relation.
541 @subsection Histogram
544 The subcommand @subcmd{HISTOGRAM} produces a histogram. Only one variable is allowed for
546 The keyword @subcmd{NORMAL} may be specified in parentheses, to indicate that the ideal normal curve
547 should be superimposed over the histogram.
548 For an alternative method to produce histograms @pxref{EXAMINE}. The
549 following example produces a histogram plot for the variable @var{weight}.
553 /HISTOGRAM = @var{weight}.
557 @subsection Bar Chart
560 The subcommand @subcmd{BAR} produces a bar chart.
561 This subcommand requires that a @var{count-function} be specified (with no arguments) or a @var{summary-function} with a variable @var{var1} in parentheses.
562 Following the summary or count function, the keyword @subcmd{BY} should be specified and then a catagorical variable, @var{var2}.
563 The values of the variable @var{var2} determine the labels of the bars to be plotted.
564 Optionally a second categorical variable @var{var3} may be specified in which case a clustered (grouped) bar chart is produced.
566 Valid count functions are
569 The weighted counts of the cases in each category.
571 The weighted counts of the cases in each category expressed as a percentage of the total weights of the cases.
573 The cumulative weighted counts of the cases in each category.
575 The cumulative weighted counts of the cases in each category expressed as a percentage of the total weights of the cases.
578 The summary function is applied to @var{var1} across all cases in each category.
579 The recognised summary functions are:
591 The following examples assume a dataset which is the results of a survey.
592 Each respondent has indicated annual income, their sex and city of residence.
593 One could create a bar chart showing how the mean income varies between of residents of different cities, thus:
595 GRAPH /BAR = MEAN(@var{income}) BY @var{city}.
598 This can be extended to also indicate how income in each city differs between the sexes.
600 GRAPH /BAR = MEAN(@var{income}) BY @var{city} BY @var{sex}.
603 One might also want to see how many respondents there are from each city. This can be achieved as follows:
605 GRAPH /BAR = COUNT BY @var{city}.
608 Bar charts can also be produced using the @ref{FREQUENCIES} and @ref{CROSSTABS} commands.
611 @section CORRELATIONS
616 /VARIABLES = @var{var_list} [ WITH @var{var_list} ]
621 /VARIABLES = @var{var_list} [ WITH @var{var_list} ]
622 /VARIABLES = @var{var_list} [ WITH @var{var_list} ]
625 [ /PRINT=@{TWOTAIL, ONETAIL@} @{SIG, NOSIG@} ]
626 [ /STATISTICS=DESCRIPTIVES XPROD ALL]
627 [ /MISSING=@{PAIRWISE, LISTWISE@} @{INCLUDE, EXCLUDE@} ]
631 The @cmd{CORRELATIONS} procedure produces tables of the Pearson correlation coefficient
632 for a set of variables. The significance of the coefficients are also given.
634 At least one @subcmd{VARIABLES} subcommand is required. If you specify the @subcmd{WITH}
635 keyword, then a non-square correlation table is produced.
636 The variables preceding @subcmd{WITH}, are used as the rows of the table,
637 and the variables following @subcmd{WITH} are used as the columns of the table.
638 If no @subcmd{WITH} subcommand is specified, then @cmd{CORRELATIONS} produces a
639 square, symmetrical table using all variables.
641 The @cmd{MISSING} subcommand determines the handling of missing variables.
642 If @subcmd{INCLUDE} is set, then user-missing values are included in the
643 calculations, but system-missing values are not.
644 If @subcmd{EXCLUDE} is set, which is the default, user-missing
645 values are excluded as well as system-missing values.
647 If @subcmd{LISTWISE} is set, then the entire case is excluded from analysis
648 whenever any variable specified in any @cmd{/VARIABLES} subcommand
649 contains a missing value.
650 If @subcmd{PAIRWISE} is set, then a case is considered missing only if either of the
651 values for the particular coefficient are missing.
652 The default is @subcmd{PAIRWISE}.
654 The @subcmd{PRINT} subcommand is used to control how the reported significance values are printed.
655 If the @subcmd{TWOTAIL} option is used, then a two-tailed test of significance is
656 printed. If the @subcmd{ONETAIL} option is given, then a one-tailed test is used.
657 The default is @subcmd{TWOTAIL}.
659 If the @subcmd{NOSIG} option is specified, then correlation coefficients with significance less than
660 0.05 are highlighted.
661 If @subcmd{SIG} is specified, then no highlighting is performed. This is the default.
664 The @subcmd{STATISTICS} subcommand requests additional statistics to be displayed. The keyword
665 @subcmd{DESCRIPTIVES} requests that the mean, number of non-missing cases, and the non-biased
666 estimator of the standard deviation are displayed.
667 These statistics are displayed in a separated table, for all the variables listed
668 in any @subcmd{/VARIABLES} subcommand.
669 The @subcmd{XPROD} keyword requests cross-product deviations and covariance estimators to
670 be displayed for each pair of variables.
671 The keyword @subcmd{ALL} is the union of @subcmd{DESCRIPTIVES} and @subcmd{XPROD}.
679 /TABLES=@var{var_list} BY @var{var_list} [BY @var{var_list}]@dots{}
680 /MISSING=@{TABLE,INCLUDE,REPORT@}
681 /FORMAT=@{TABLES,NOTABLES@}
683 /CELLS=@{COUNT,ROW,COLUMN,TOTAL,EXPECTED,RESIDUAL,SRESIDUAL,
684 ASRESIDUAL,ALL,NONE@}
685 /COUNT=@{ASIS,CASE,CELL@}
687 /STATISTICS=@{CHISQ,PHI,CC,LAMBDA,UC,BTAU,CTAU,RISK,GAMMA,D,
688 KAPPA,ETA,CORR,ALL,NONE@}
692 /VARIABLES=@var{var_list} (@var{low},@var{high})@dots{}
695 The @cmd{CROSSTABS} procedure displays crosstabulation
696 tables requested by the user. It can calculate several statistics for
697 each cell in the crosstabulation tables. In addition, a number of
698 statistics can be calculated for each table itself.
700 The @subcmd{TABLES} subcommand is used to specify the tables to be reported. Any
701 number of dimensions is permitted, and any number of variables per
702 dimension is allowed. The @subcmd{TABLES} subcommand may be repeated as many
703 times as needed. This is the only required subcommand in @dfn{general
706 Occasionally, one may want to invoke a special mode called @dfn{integer
707 mode}. Normally, in general mode, @pspp{} automatically determines
708 what values occur in the data. In integer mode, the user specifies the
709 range of values that the data assumes. To invoke this mode, specify the
710 @subcmd{VARIABLES} subcommand, giving a range of data values in parentheses for
711 each variable to be used on the @subcmd{TABLES} subcommand. Data values inside
712 the range are truncated to the nearest integer, then assigned to that
713 value. If values occur outside this range, they are discarded. When it
714 is present, the @subcmd{VARIABLES} subcommand must precede the @subcmd{TABLES}
717 In general mode, numeric and string variables may be specified on
718 TABLES. In integer mode, only numeric variables are allowed.
720 The @subcmd{MISSING} subcommand determines the handling of user-missing values.
721 When set to @subcmd{TABLE}, the default, missing values are dropped on a table by
722 table basis. When set to @subcmd{INCLUDE}, user-missing values are included in
723 tables and statistics. When set to @subcmd{REPORT}, which is allowed only in
724 integer mode, user-missing values are included in tables but marked with
725 a footnote and excluded from statistical calculations.
727 The @subcmd{FORMAT} subcommand controls the characteristics of the
728 crosstabulation tables to be displayed. It has a number of possible
733 @subcmd{TABLES}, the default, causes crosstabulation tables to be output.
734 @subcmd{NOTABLES}, which is equivalent to @code{CELLS=NONE}, suppresses them.
737 @subcmd{AVALUE}, the default, causes values to be sorted in ascending order.
738 @subcmd{DVALUE} asserts a descending sort order.
741 The @subcmd{CELLS} subcommand controls the contents of each cell in the displayed
742 crosstabulation table. The possible settings are:
758 Standardized residual.
760 Adjusted standardized residual.
764 Suppress cells entirely.
767 @samp{/CELLS} without any settings specified requests @subcmd{COUNT}, @subcmd{ROW},
768 @subcmd{COLUMN}, and @subcmd{TOTAL}.
769 If @subcmd{CELLS} is not specified at all then only @subcmd{COUNT}
772 By default, crosstabulation and statistics use raw case weights,
773 without rounding. Use the @subcmd{/COUNT} subcommand to perform
774 rounding: CASE rounds the weights of individual weights as cases are
775 read, CELL rounds the weights of cells within each crosstabulation
776 table after it has been constructed, and ASIS explicitly specifies the
777 default non-rounding behavior. When rounding is requested, ROUND, the
778 default, rounds to the nearest integer and TRUNCATE rounds toward
781 The @subcmd{STATISTICS} subcommand selects statistics for computation:
787 Pearson chi-square, likelihood ratio, Fisher's exact test, continuity
788 correction, linear-by-linear association.
792 Contingency coefficient.
796 Uncertainty coefficient.
812 Spearman correlation, Pearson's r.
819 Selected statistics are only calculated when appropriate for the
820 statistic. Certain statistics require tables of a particular size, and
821 some statistics are calculated only in integer mode.
823 @samp{/STATISTICS} without any settings selects CHISQ. If the
824 @subcmd{STATISTICS} subcommand is not given, no statistics are calculated.
827 The @samp{/BARCHART} subcommand produces a clustered bar chart for the first two
828 variables on each table.
829 If a table has more than two variables, the counts for the third and subsequent levels
830 are aggregated and the chart is produced as if there were only two variables.
833 @strong{Please note:} Currently the implementation of @cmd{CROSSTABS} has the
834 following limitations:
838 Significance of some symmetric and directional measures is not calculated.
840 Asymptotic standard error is not calculated for
841 Goodman and Kruskal's tau or symmetric Somers' d.
843 Approximate T is not calculated for symmetric uncertainty coefficient.
846 Fixes for any of these deficiencies would be welcomed.
848 @subsection Crosstabs Example
850 @cindex chi-square test of independence
852 A researcher wishes to know if, in an industry, a person's sex is related to
853 the person's occupation. To investigate this, she has determined that the
854 @file{personnel.sav} is a representative, randomly selected sample of persons.
855 The researcher's null hypothesis is that a person's sex has no relation to a
856 person's occupation. She uses a chi-squared test of independence to investigate
859 @float Example, crosstabs:ex
860 @psppsyntax {crosstabs.sps}
861 @caption {Running crosstabs on the @exvar{sex} and @exvar{occupation} variables}
864 The syntax in @ref{crosstabs:ex} conducts a chi-squared test of independence.
865 The line @code{/tables = occupation by sex} indicates that @exvar{occupation}
866 and @exvar{sex} are the variables to be tabulated. To do this using the @gui{}
867 you must place these variable names respectively in the @samp{Row} and
868 @samp{Column} fields as shown in @ref{crosstabs:scr}.
870 @float Screenshot, crosstabs:scr
871 @psppimage {crosstabs}
872 @caption {The Crosstabs dialog box with the @exvar{sex} and @exvar{occupation} variables selected}
875 Similarly, the @samp{Cells} button shows a dialog box to select the @code{count}
876 and @code{expected} options. All other cell options can be deselected for this
879 You would use the @samp{Format} and @samp{Statistics} buttons to select options
880 for the @subcmd{FORMAT} and @subcmd{STATISTICS} subcommands. In this example,
881 the @samp{Statistics} requires only the @samp{Chisq} option to be checked. All
882 other options should be unchecked. No special settings are required from the
883 @samp{Format} dialog.
885 As shown in @ref{crosstabs:res} @cmd{CROSSTABS} generates a contingency table
886 containing the observed count and the expected count of each sex and each
887 occupation. The expected count is the count which would be observed if the
888 null hypothesis were true.
890 The significance of the Pearson Chi-Square value is very much larger than the
891 normally accepted value of 0.05 and so one cannot reject the null hypothesis.
892 Thus the researcher must conclude that a person's sex has no relation to the
895 @float Results, crosstabs:res
896 @psppoutput {crosstabs}
897 @caption {The results of a test of independence between @exvar{sex} and @exvar{occupation}}
904 @cindex custom tables
905 @cindex tables, custom
907 @code{CTABLES} has the following overall syntax. At least one
908 @code{TABLE} subcommand is required:
912 @dots{}@i{global subcommands}@dots{}
913 [@t{/TABLE} @i{axis} [@t{BY} @i{axis} [@t{BY} @i{axis}]]
914 @dots{}@i{per-table subcommands}@dots{}]@dots{}
918 where each @i{axis} may be empty or take one of the following forms:
922 @i{variable} @t{[}@{@t{C} @math{|} @t{S}@}@t{]}
926 @i{axis} @t{[}@i{summary} [@i{string}] [@i{format}]@t{]}
929 The following subcommands precede the first @code{TABLE} subcommand
930 and apply to all of the output tables. All of these subcommands are
935 [@t{MINCOLWIDTH=}@{@t{DEFAULT} @math{|} @i{width}@}]
936 [@t{MAXCOLWIDTH=}@{@t{DEFAULT} @math{|} @i{width}@}]
937 [@t{UNITS=}@{@t{POINTS} @math{|} @t{INCHES} @math{|} @t{CM}@}]
938 [@t{EMPTY=}@{@t{ZERO} @math{|} @t{BLANK} @math{|} @i{string}@}]
939 [@t{MISSING=}@i{string}]
941 @t{VARIABLES=}@i{variables}
942 @t{DISPLAY}=@{@t{DEFAULT} @math{|} @t{NAME} @math{|} @t{LABEL} @math{|} @t{BOTH} @math{|} @t{NONE}@}
943 @ignore @c not yet implemented
944 @t{/MRSETS COUNTDUPLICATES=}@{@t{YES} @math{|} @t{NO}@}
946 @t{/SMISSING} @{@t{VARIABLE} @math{|} @t{LISTWISE}@}
947 @t{/PCOMPUTE} @t{&}@i{postcompute}@t{=EXPR(}@i{expression}@t{)}
948 @t{/PPROPERTIES} @t{&}@i{postcompute}@dots{}
949 [@t{LABEL=}@i{string}]
950 [@t{FORMAT=}[@i{summary} @i{format}]@dots{}]
951 [@t{HIDESOURCECATS=}@{@t{NO} @math{|} @t{YES}@}
952 @t{/WEIGHT VARIABLE=}@i{variable}
953 @t{/HIDESMALLCOUNTS COUNT=@i{count}}
956 The following subcommands follow @code{TABLE} and apply only to the
957 previous @code{TABLE}. All of these subcommands are optional:
961 [@t{POSITION=}@{@t{COLUMN} @math{|} @t{ROW} @math{|} @t{LAYER}@}]
962 [@t{VISIBLE=}@{@t{YES} @math{|} @t{NO}@}]
963 @t{/CLABELS} @{@t{AUTO} @math{|} @{@t{ROWLABELS}@math{|}@t{COLLABELS}@}@t{=}@{@t{OPPOSITE}@math{|}@t{LAYER}@}@}
964 @t{/CATEGORIES} @t{VARIABLES=}@i{variables}
965 @{@t{[}@i{value}@t{,} @i{value}@dots{}@t{]}
966 @math{|} [@t{ORDER=}@{@t{A} @math{|} @t{D}@}]
967 [@t{KEY=}@{@t{VALUE} @math{|} @t{LABEL} @math{|} @i{summary}@t{(}@i{variable}@t{)}@}]
968 [@t{MISSING=}@{@t{EXCLUDE} @math{|} @t{INCLUDE}@}]@}
969 [@t{TOTAL=}@{@t{NO} @math{|} @t{YES}@} [@t{LABEL=}@i{string}] [@t{POSITION=}@{@t{AFTER} @math{|} @t{BEFORE}@}]]
970 [@t{EMPTY=}@{@t{INCLUDE} @math{|} @t{EXCLUDE}@}]
972 [@t{TITLE=}@i{string}@dots{}]
973 [@t{CAPTION=}@i{string}@dots{}]
974 [@t{CORNER=}@i{string}@dots{}]
975 @ignore @c not yet implemented
976 @t{/CRITERIA CILEVEL=}@i{percentage}
977 @t{/SIGTEST TYPE=CHISQUARE}
978 [@t{ALPHA=}@i{siglevel}]
979 [@t{INCLUDEMRSETS=}@{@t{YES} @math{|} @t{NO}@}]
980 [@t{CATEGORIES=}@{@t{ALLVISIBLE} @math{|} @t{SUBTOTALS}@}]
981 @t{/COMPARETEST TYPE=}@{@t{PROP} @math{|} @t{MEAN}@}
982 [@t{ALPHA=}@i{value}[@t{,} @i{value}]]
983 [@t{ADJUST=}@{@t{BONFERRONI} @math{|} @t{BH} @math{|} @t{NONE}@}]
984 [@t{INCLUDEMRSETS=}@{@t{YES} @math{|} @t{NO}@}]
985 [@t{MEANSVARIANCE=}@{@t{ALLCATS} @math{|} @t{TESTEDCATS}@}]
986 [@t{CATEGORIES=}@{@t{ALLVISIBLE} @math{|} @t{SUBTOTALS}@}]
987 [@t{MERGE=}@{@t{NO} @math{|} @t{YES}@}]
988 [@t{STYLE=}@{@t{APA} @math{|} @t{SIMPLE}@}]
989 [@t{SHOWSIG=}@{@t{NO} @math{|} @t{YES}@}]
993 The @code{CTABLES} (aka ``custom tables'') command produces
994 multi-dimensional tables from categorical and scale data. It offers
995 many options for data summarization and formatting.
997 This section's examples use data from the 2008 (USA) National Survey
998 of Drinking and Driving Attitudes and Behaviors, a public domain data
999 set from the (USA) National Highway Traffic Administration and
1000 available at @url{https://data.transportation.gov}. @pspp{} includes
1001 this data set, with a slightly modified dictionary, as
1002 @file{examples/nhtsa.sav}.
1004 @node CTABLES Basics
1007 The only required subcommand is @code{TABLE}, which specifies the
1008 variables to include along each axis:
1010 @t{/TABLE} @i{rows} [@t{BY} @i{columns} [@t{BY} @i{layers}]]
1013 In @code{TABLE}, each of @var{rows}, @var{columns}, and @var{layers}
1014 is either empty or an axis expression that specifies one or more
1015 variables. At least one must specify an axis expression.
1018 * CTABLES Categorical Variable Basics::
1019 * CTABLES Scalar Variable Basics::
1020 * CTABLES Overriding Measurement Level::
1023 @node CTABLES Categorical Variable Basics
1024 @subsubsection Categorical Variables
1026 An axis expression that names a categorical variable divides the data
1027 into cells according to the values of that variable. When all the
1028 variables named on @code{TABLE} are categorical, by default each cell
1029 displays the number of cases that it contains, so specifying a single
1030 variable yields a frequency table, much like the output of the
1031 @code{FREQUENCIES} command (@pxref{FREQUENCIES}):
1034 CTABLES /TABLE=AgeGroup.
1036 @psppoutput {ctables1}
1039 Specifying a row and a column categorical variable yields a
1040 crosstabulation, much like the output of the @code{CROSSTABS} command
1041 (@pxref{CROSSTABS}):
1044 CTABLES /TABLE=AgeGroup BY qns3a.
1046 @psppoutput {ctables2}
1049 The @samp{>} ``nesting'' operator nests multiple variables on a single
1053 CTABLES /TABLE qn105ba BY AgeGroup > qns3a.
1055 @psppoutput {ctables3}
1058 The @samp{+} ``stacking'' operator allows a single output table to
1059 include multiple data analyses. With @samp{+}, @code{CTABLES} divides
1060 the output table into multiple @dfn{sections}, each of which includes
1061 an analysis of the full data set. For example, the following command
1062 separately tabulates age group and driving frequency by gender:
1065 CTABLES /TABLE AgeGroup + qn1 BY qns3a.
1067 @psppoutput {ctables4}
1070 When @samp{+} and @samp{>} are used together, @samp{>} binds more
1071 tightly. Use parentheses to override operator precedence. Thus:
1074 CTABLES /TABLE qn26 + qn27 > qns3a.
1075 CTABLES /TABLE (qn26 + qn27) > qns3a.
1077 @psppoutput {ctables5}
1079 @node CTABLES Scalar Variable Basics
1080 @subsubsection Scalar Variables
1082 For a categorical variable, @code{CTABLES} divides the table into a
1083 cell per category. For a scalar variable, @code{CTABLES} instead
1084 calculates a summary measure, by default the mean, of the values that
1085 fall into a cell. For example, if the only variable specified is a
1086 scalar variable, then the output is a single cell that holds the mean
1090 CTABLES /TABLE qnd1.
1092 @psppoutput {ctables6}
1094 A scalar variable may nest with categorical variables. The following
1095 example shows the mean age of survey respondents across gender and
1099 CTABLES /TABLE qns3a > qnd1 BY region.
1101 @psppoutput {ctables7}
1103 The order of nesting of scalar and categorical variables affects table
1104 labeling, but it does not affect the data displayed in the table. The
1105 following example shows how the output changes when the nesting order
1106 of the scalar and categorical variable are interchanged:
1109 CTABLES /TABLE qnd1 > qns3a BY region.
1111 @psppoutput {ctables8}
1113 Only a single scalar variable may appear in each section; that is, a
1114 scalar variable may not nest inside a scalar variable directly or
1115 indirectly. Scalar variables may only appear on one axis within
1118 @node CTABLES Overriding Measurement Level
1119 @subsubsection Overriding Measurement Level
1121 By default, @code{CTABLES} uses a variable's measurement level to
1122 decide whether to treat it as categorical or scalar. Variables
1123 assigned the nominal or ordinal measurement level are treated as
1124 categorical, and scalar variables are treated as scalar.
1126 When @pspp{} reads data from a file in an external format, such as a
1127 text file, variables' measurement levels are often unknown. If
1128 @code{CTABLES} runs when a variable has an unknown measurement level,
1129 it makes an initial pass through the data to guess measurement levels
1130 using the rules described earlier in this manual (@pxref{Measurement
1131 Level}). Use the @code{VARIABLE LEVEL} command to set or change a
1132 variable's measurement level (@pxref{VARIABLE LEVEL}).
1134 To treat a variable as categorical or scalar only for one use on
1135 @code{CTABLES}, add @samp{[C]} or @samp{[S]}, respectively, after the
1136 variable name. The following example shows the output when variable
1137 @code{qn20} is analyzed as scalar (the default for its measurement
1138 level) and as categorical:
1142 /TABLE qn20 BY qns3a
1143 /TABLE qn20 [C] BY qns3a.
1145 @psppoutput {ctables9}
1148 @node CTABLES Multiple Response Sets
1149 @subsubheading Multiple Response Sets
1151 The @code{CTABLES} command does not yet support multiple response
1155 @node CTABLES Data Summarization
1156 @subsection Data Summarization
1158 The @code{CTABLES} command allows the user to control how the data are
1159 summarized with @dfn{summary specifications}, syntax that lists one or
1160 more summary function names, optionally separated by commas, and which
1161 are enclosed in square brackets following a variable name on the
1162 @code{TABLE} subcommand. When all the variables are categorical,
1163 summary specifications can be given for the innermost nested variables
1164 on any one axis. When a scalar variable is present, only the scalar
1165 variable may have summary specifications.
1167 The following example includes a summary specification for column and
1168 row percentages for categorical variables, and mean and median for a
1173 /TABLE=qnd1 [MEAN, MEDIAN] BY qns3a
1174 /TABLE=AgeGroup [COLPCT, ROWPCT] BY qns3a.
1176 @psppoutput {ctables10}
1178 A summary specification may override the default label and format by
1179 appending a string or format specification or both (in that order) to
1180 the summary function name. For example:
1183 CTABLES /TABLE=AgeGroup [COLPCT 'Gender %' PCT5.0,
1184 ROWPCT 'Age Group %' PCT5.0]
1187 @psppoutput {ctables11}
1189 @c TODO special CTABLES formats
1190 In addition to the standard formats, @code{CTABLES} allows the user to
1191 specify the following special formats:
1193 @multitable {@code{NEGPAREN@i{w}.@i{d}}} {Encloses all numbers in parentheses.} {@t{(42.96%)}} {@t{(-42.96%)}}
1194 @item @code{NEGPAREN@i{w}.@i{d}}
1195 @tab Encloses negative numbers in parentheses.
1197 @tab @t{@w{ }(42.96)}
1199 @item @code{NEQUAL@i{w}.@i{d}}
1200 @tab Adds a @code{N=} prefix.
1201 @tab @t{@w{ }N=42.96}
1202 @tab @t{@w{ }N=-42.96}
1204 @item @code{@code{PAREN@i{w}.@i{d}}}
1205 @tab Encloses all numbers in parentheses.
1206 @tab @t{@w{ }(42.96)}
1207 @tab @t{@w{ }(-42.96)}
1209 @item @code{PCTPAREN@i{w}.@i{d}}
1210 @tab Encloses all numbers in parentheses with a @samp{%} suffix.
1211 @tab @t{@w{ }(42.96%)}
1215 Parentheses provide a shorthand to apply summary specifications to
1216 multiple variables. For example, both of these commands:
1219 CTABLES /TABLE=AgeGroup[COLPCT] + qns1[COLPCT] BY qns3a.
1220 CTABLES /TABLE=(AgeGroup + qns1)[COLPCT] BY qns3a.
1224 produce the same output shown below:
1226 @psppoutput {ctables12}
1228 The following sections list the available summary functions. After
1229 each function's name is given its default label and format. If no
1230 format is listed, then the default format is the print format for the
1231 variable being summarized.
1234 * CTABLES Summary Functions for Individual Cells::
1235 * CTABLES Summary Functions for Groups of Cells::
1236 * CTABLES Summary Functions for Adjusted Weights::
1237 * CTABLES Unweighted Summary Functions::
1240 @node CTABLES Summary Functions for Individual Cells
1241 @subsubsection Summary Functions for Individual Cells
1243 This section lists the summary functions that consider only an
1244 individual cell in @code{CTABLES}. Only one such summary function,
1245 @code{COUNT}, may be applied to both categorical and scale variables:
1248 @item @code{COUNT} (``Count'', F40.0)
1249 The sum of weights in a cell.
1251 If @code{CATEGORIES} for one or more of the variables in a table
1252 include missing values (@pxref{CTABLES Per-Variable Category
1253 Options}), then some or all of the categories for a cell might be
1254 missing values. @code{COUNT} counts data included in a cell
1255 regardless of whether its categories are missing.
1258 The following summary functions apply only to scale variables or
1259 totals and subtotals for categorical variables. Be cautious about
1260 interpreting the summary value in the latter case, because it is not
1261 necessarily meaningful; however, the mean of a Likert scale, etc.@:
1262 may have a straightforward interpreation.
1265 @item @code{MAXIMUM} (``Maximum'')
1268 @item @code{MEAN} (``Mean'')
1271 @item @code{MEDIAN} (``Median'')
1274 @item @code{MINIMUM} (``Minimum'')
1277 @item @code{MISSING} (``Missing'')
1278 Sum of weights of user- and system-missing values.
1280 @item @code{MODE} (``Mode'')
1281 The highest-frequency value. Ties are broken by taking the smallest mode.
1283 @item @code{PTILE} @i{n} (``Percentile @i{n}'')
1284 The @var{n}th percentile, where @math{0 @leq{} @var{n} @leq{} 100}.
1286 @item @code{RANGE} (``Range'')
1287 The maximum minus the minimum.
1289 @item @code{SEMEAN} (``Std Error of Mean'')
1290 The standard error of the mean.
1292 @item @code{STDDEV} (``Std Deviation'')
1293 The standard deviation.
1295 @item @code{SUM} (``Sum'')
1298 @item @code{TOTALN} (``Total N'', F40.0)
1299 The sum of weights in a cell.
1301 For scale data, @code{COUNT} and @code{TOTALN} are the same.
1303 For categorical data, @code{TOTALN} counts missing values in excluded
1304 categories, that is, user-missing values not in an explicit category
1305 list on @code{CATEGORIES} (@pxref{CTABLES Per-Variable Category
1306 Options}), or user-missing values excluded because
1307 @code{MISSING=EXCLUDE} is in effect on @code{CATEGORIES}, or
1308 system-missing values. @code{COUNT} does not count these.
1310 @item @code{VALIDN} (``Valid N'', F40.0)
1311 The sum of valid count weights in included categories.
1313 @code{VALIDN} does not count missing values regardless of whether they
1314 are in included categories via @code{CATEGORIES}. @code{VALIDN} does
1315 not count valid values that are in excluded categories.
1317 @item @code{VARIANCE} (``Variance'')
1321 @node CTABLES Summary Functions for Groups of Cells
1322 @subsubsection Summary Functions for Groups of Cells
1324 These summary functions summarize over multiple cells within an area
1325 of the output chosen by the user and specified as part of the function
1326 name. The following basic @var{area}s are supported, in decreasing
1331 A @dfn{section}. Stacked variables divide sections of the output from
1332 each other. sections may span multiple layers.
1335 A section within a single layer.
1338 A @dfn{subtable}, whose contents are the cells that pair an innermost
1339 row variable and an innermost column variable within a single layer.
1342 The following shows how the output for the table expression @code{qn61
1343 > qn57 BY qnd7a > qn86 + qn64b BY qns3a}@footnote{This is not
1344 necessarily a meaningful table, so for clarity variable labels are
1345 omitted.} is divided up into @code{TABLE}, @code{LAYER}, and
1346 @code{SUBTABLE} areas. Each unique value for Table ID is one section,
1347 and similarly for Layer ID and Subtable ID. Thus, this output has two
1348 @code{TABLE} areas (one for @code{qnd7a} and one for @code{qn64b}),
1349 four @code{LAYER} areas (for those two variables, per layer), and 12
1350 @code{SUBTABLE} areas.
1351 @psppoutput {ctables22}
1353 @code{CTABLES} also supports the following @var{area}s that further
1354 divide a subtable or a layer within a section:
1359 A row or column, respectively, in one layer of a section.
1363 A row or column, respectively, in a subtable.
1366 The following summary functions for groups of cells are available for
1367 each @var{area} described above, for both categorical and scale
1371 @item @code{@i{area}PCT} or @code{@i{area}PCT.COUNT} (``@i{Area} %'', PCT40.1)
1372 A percentage of total counts within @var{area}.
1374 @item @code{@i{area}PCT.VALIDN} (``@i{Area} Valid N %'', PCT40.1)
1375 A percentage of total counts for valid values within @var{area}.
1377 @item @code{@i{area}PCT.TOTALN} (``@i{Area} Total N %'', PCT40.1)
1378 A percentage of total counts for all values within @var{area}.
1381 Scale variables and totals and subtotals for categorical variables may
1382 use the following additional group cell summary function:
1385 @item @code{@i{area}PCT.SUM} (``@i{Area} Sum %'', PCT40.1)
1386 Percentage of the sum of the values within @var{area}.
1389 @node CTABLES Summary Functions for Adjusted Weights
1390 @subsubsection Summary Functions for Adjusted Weights
1392 If the @code{WEIGHT} subcommand specified an adjustment weight
1393 variable, then the following summary functions use its value instead
1394 of the dictionary weight variable. Otherwise, they are equivalent to
1395 the summary function without the @samp{E}-prefix:
1399 @code{ECOUNT} (``Adjusted Count'', F40.0)
1402 @code{ETOTALN} (``Adjusted Total N'', F40.0)
1405 @code{EVALIDN} (``Adjusted Valid N'', F40.0)
1408 @node CTABLES Unweighted Summary Functions
1409 @subsubsection Unweighted Summary Functions
1411 The following summary functions with a @samp{U}-prefix are equivalent
1412 to the same ones without the prefix, except that they use unweighted
1417 @code{UCOUNT} (``Unweighted Count'', F40.0)
1420 @code{U@i{area}PCT} or @code{U@i{area}PCT.COUNT} (``Unweighted @i{Area} %'', PCT40.1)
1423 @code{U@i{area}PCT.VALIDN} (``Unweighted @i{Area} Valid N %'', PCT40.1)
1426 @code{U@i{area}PCT.TOTALN} (``Unweighted @i{Area} Total N %'', PCT40.1)
1429 @code{UMEAN} (``Unweighted Mean'')
1432 @code{UMEDIAN} (``Unweighted Median'')
1435 @code{UMISSING} (``Unweighted Missing'')
1438 @code{UMODE} (``Unweight Mode'')
1441 @code{U@i{area}PCT.SUM} (``Unweighted @i{Area} Sum %'', PCT40.1)
1444 @code{UPTILE} @i{n} (``Unweighted Percentile @i{n}'')
1447 @code{USEMEAN} (``Unweighted Std Error of Mean'')
1450 @code{USTDDEV} (``Unweighted Std Deviation'')
1453 @code{USUM} (``Unweighted Sum'')
1456 @code{UTOTALN} (``Unweighted Total N'', F40.0)
1459 @code{UVALIDN} (``Unweighted Valid N'', F40.0)
1462 @code{UVARIANCE} (``Unweighted Variance'', F40.0)
1465 @node CTABLES Statistics Positions and Labels
1466 @subsection Statistics Positions and Labels
1470 [@t{POSITION=}@{@t{COLUMN} @math{|} @t{ROW} @math{|} @t{LAYER}@}]
1471 [@t{VISIBLE=}@{@t{YES} @math{|} @t{NO}@}]
1474 The @code{SLABELS} subcommand controls the position and visibility of
1475 summary statistics for the @code{TABLE} subcommand that it follows.
1477 @code{POSITION} sets the axis on which summary statistics appear.
1478 With @t{POSITION=COLUMN}, which is the default, each summary statistic
1479 appears in a column. For example:
1482 CTABLES /TABLE=qnd1 [MEAN, MEDIAN] BY qns3a.
1484 @psppoutput {ctables13}
1487 With @t{POSITION=ROW}, each summary statistic appears in a row, as
1491 CTABLES /TABLE=qnd1 [MEAN, MEDIAN] BY qns3a /SLABELS POSITION=ROW.
1493 @psppoutput {ctables14}
1496 @t{POSITION=LAYER} is also available to place each summary statistic in
1499 Labels for summary statistics are shown by default. Use
1500 @t{VISIBLE=NO} to suppress them. Because unlabeled data can cause
1501 confusion, it should only be considered if the meaning of the data is
1502 evident, as in a simple case like this:
1505 CTABLES /TABLE=AgeGroup [TABLEPCT] /SLABELS VISIBLE=NO.
1507 @psppoutput {ctables15}
1509 @node CTABLES Category Label Positions
1510 @subsection Category Label Positions
1513 @t{/CLABELS} @{@t{AUTO} @math{|} @{@t{ROWLABELS}@math{|}@t{COLLABELS}@}@t{=}@{@t{OPPOSITE}@math{|}@t{LAYER}@}@}
1516 The @code{CLABELS} subcommand controls the position of category labels
1517 for the @code{TABLE} subcommand that it follows. By default, or if
1518 @t{AUTO} is specified, category labels for a given variable nest
1519 inside the variable's label on the same axis. For example, the
1520 command below results in age categories nesting within the age group
1521 variable on the rows axis and gender categories within the gender
1522 variable on the columns axis:
1525 CTABLES /TABLE AgeGroup BY qns3a.
1527 @psppoutput {ctables16}
1529 @t{ROWLABELS=OPPOSITE} or @t{COLLABELS=OPPOSITE} move row or column
1530 variable category labels, respectively, to the opposite axis. The
1531 setting affects only the innermost variable on the given axis. For
1535 CTABLES /TABLE AgeGroup BY qns3a /CLABELS ROWLABELS=OPPOSITE.
1536 CTABLES /TABLE AgeGroup BY qns3a /CLABELS COLLABELS=OPPOSITE.
1538 @psppoutput {ctables17}
1540 @t{ROWLABELS=LAYER} or @t{COLLABELS=LAYER} move the innermost row or
1541 column variable category labels, respectively, to the layer axis.
1543 Only one axis's labels may be moved, whether to the opposite axis or
1546 @c TODO Moving category labels for stacked variables
1548 @subsubheading Effect on Summary Statistics
1550 @code{CLABELS} primarily affects the appearance of tables, not the
1551 data displayed in them. However, @code{CTABLES} can affect the values
1552 displayed for statistics that summarize areas of a table, since it can
1553 change the definitions of these areas.
1555 For example, consider the following syntax and output:
1558 CTABLES /TABLE AgeGroup BY qns3a [ROWPCT, COLPCT].
1560 @psppoutput {ctables23}
1563 Using @code{COLLABELS=OPPOSITE} changes the definitions of rows and
1564 columns, so that column percentages display what were previously row
1565 percentages and the new row percentages become meaningless (because
1566 there is only one cell per row):
1570 /TABLE AgeGroup BY qns3a [ROWPCT, COLPCT]
1571 /CLABELS COLLABELS=OPPOSITE.
1573 @psppoutput {ctables24}
1575 @node CTABLES Per-Variable Category Options
1576 @subsection Per-Variable Category Options
1579 @t{/CATEGORIES} @t{VARIABLES=}@i{variables}
1580 @{@t{[}@i{value}@t{,} @i{value}@dots{}@t{]}
1581 @math{|} [@t{ORDER=}@{@t{A} @math{|} @t{D}@}]
1582 [@t{KEY=}@{@t{VALUE} @math{|} @t{LABEL} @math{|} @i{summary}@t{(}@i{variable}@t{)}@}]
1583 [@t{MISSING=}@{@t{EXCLUDE} @math{|} @t{INCLUDE}@}]@}
1584 [@t{TOTAL=}@{@t{NO} @math{|} @t{YES}@} [@t{LABEL=}@i{string}] [@t{POSITION=}@{@t{AFTER} @math{|} @t{BEFORE}@}]]
1585 [@t{EMPTY=}@{@t{INCLUDE} @math{|} @t{EXCLUDE}@}]
1588 The @code{CATEGORIES} subcommand specifies, for one or more
1589 categorical variables, the categories to include and exclude, the sort
1590 order for included categories, and treatment of missing values. It
1591 also controls the totals and subtotals to display. It may be
1592 specified any number of times, each time for a different set of
1593 variables. @code{CATEGORIES} applies to the table produced by the
1594 @code{TABLE} subcommand that it follows.
1596 @code{CATEGORIES} does not apply to scalar variables.
1598 @t{VARIABLES} is required and must list the variables for the subcommand
1601 There are two way to specify the Categories to include and their sort
1605 @item Explicit categories.
1606 @anchor{CTABLES Explicit Category List}
1607 To explicitly specify categories to include, list the categories
1608 within square brackets in the desired sort order. Use spaces or
1609 commas to separate values. Categories not covered by the list are
1610 excluded from analysis.
1612 Each element of the list takes one of the following forms:
1617 A numeric or string category value, for variables that have the
1622 A date or time category value, for variables that have a date or time
1625 @item @i{min} THRU @i{max}
1626 @itemx LO THRU @i{max}
1627 @itemx @i{min} THRU HI
1628 A range of category values, where @var{min} and @var{max} each takes
1629 one of the forms above, in increasing order.
1632 All user-missing values. (To match individual user-missing values,
1633 specify their category values.)
1636 Any non-missing value not covered by any other element of the list
1637 (regardless of where @t{OTHERNM} is placed in the list).
1639 @item &@i{postcompute}
1640 A computed category name (@pxref{CTABLES Computed Categories}).
1643 Additional forms, described later, allow for subtotals.
1644 If multiple elements of the list cover a given category, the last one
1645 in the list takes precedence.
1647 @item Implicit categories.
1648 Without an explicit list of categories, @pspp{} sorts
1649 categories automatically.
1651 The @code{KEY} setting specifies the sort key. By default, or with
1652 @code{KEY=VALUE}, categories are sorted by default. Categories may
1653 also be sorted by value label, with @code{KEY=LABEL}, or by the value
1654 of a summary function, e.g.@: @code{KEY=COUNT}.
1655 @ignore @c Not yet implemented
1656 For summary functions, a variable name may be specified in
1657 parentheses, e.g.@: @code{KEY=MAXIUM(qnd1)}, and this is required for
1658 functions that apply only to scalar variables. The @code{PTILE}
1659 function also requires a percentage argument, e.g.@:
1660 @code{KEY=PTILE(qnd1, 90)}. Only summary functions used in the table
1661 may be used, except that @code{COUNT} is always allowed.
1664 By default, or with @code{ORDER=A}, categories are sorted in ascending
1665 order. Specify @code{ORDER=D} to sort in descending order.
1667 User-missing values are excluded by default, or with
1668 @code{MISSING=EXCLUDE}. Specify @code{MISSING=INCLUDE} to include
1669 user-missing values. The system-missing value is always excluded.
1672 @subsubheading Totals and Subtotals
1674 @code{CATEGORIES} also controls display of totals and subtotals.
1675 Totals are not displayed with @code{TOTAL=NO}, which is also the
1676 default. Specify @code{TOTAL=YES} to display a total. By default,
1677 the total is labeled ``Total''; use @code{LABEL="@i{label}"} to
1680 Subtotals are also not displayed by default. To add one or more
1681 subtotals, use an explicit category list and insert @code{SUBTOTAL} or
1682 @code{HSUBTOTAL} in the position or positions where the subtotal
1683 should appear. With @code{SUBTOTAL}, the subtotal becomes an extra
1684 row or column or layer; @code{HSUBTOTAL} additionally hides the
1685 categories that make up the subtotal. Either way, the default label
1686 is ``Subtotal'', use @code{SUBTOTAL="@i{label}"} or
1687 @code{HSUBTOTAL="@i{label}"} to specify a custom label.
1689 By default, or with @code{POSITION=AFTER}, totals are displayed in the
1690 output after the last category and subtotals apply to categories that
1691 precede them. With @code{POSITION=BEFORE}, totals come before the
1692 first category and subtotals apply to categories that follow them.
1694 Only categorical variables may have totals and subtotals. Scalar
1695 variables may be ``totaled'' indirectly by enabling totals and
1696 subtotals on a categorical variable within which the scalar variable is
1699 @c TODO Specifying summaries for totals and subtotals
1701 @subsubheading Categories Without Values
1703 Some categories might not be included in the data set being analyzed.
1704 For example, our example data set has no cases in the ``15 or
1705 younger'' age group. By default, or with @code{EMPTY=INCLUDE},
1706 @pspp{} includes these empty categories in output tables. To exclude
1707 them, specify @code{EMPTY=EXCLUDE}.
1709 For implicit categories, empty categories potentially include all the
1710 values with value labels for a given variable; for explicit
1711 categories, they include all the values listed individually and all
1712 values with value labels that are covered by ranges or @code{MISSING}
1715 @node CTABLES Titles
1720 [@t{TITLE=}@i{string}@dots{}]
1721 [@t{CAPTION=}@i{string}@dots{}]
1722 [@t{CORNER=}@i{string}@dots{}]
1725 @c TODO Describe substitution variables
1727 The @code{TITLES} subcommand sets the title, caption, and corner text
1728 for the table output for the previous @code{TABLE} subcommand. The
1729 title appears above the table, the caption below the table, and the
1730 corner text appears in the table's upper left corner. By default, the
1731 title is ``Custom Tables'' and the caption and corner text are empty.
1732 With some table output styles, the corner text is not displayed.
1734 @node CTABLES Table Formatting
1735 @subsection Table Formatting
1739 [@t{MINCOLWIDTH=}@{@t{DEFAULT} @math{|} @i{width}@}]
1740 [@t{MAXCOLWIDTH=}@{@t{DEFAULT} @math{|} @i{width}@}]
1741 [@t{UNITS=}@{@t{POINTS} @math{|} @t{INCHES} @math{|} @t{CM}@}]
1742 [@t{EMPTY=}@{@t{ZERO} @math{|} @t{BLANK} @math{|} @i{string}@}]
1743 [@t{MISSING=}@i{string}]
1746 The @code{FORMAT} subcommand, which must precede the first
1747 @code{TABLE} subcommand, controls formatting for all the output
1748 tables. @code{FORMAT} and all of its settings are optional.
1750 Use @code{MINCOLWIDTH} and @code{MAXCOLWIDTH} to control the minimum
1751 or maximum width of columns in output tables. By default, with
1752 @code{DEFAULT}, column width varies based on content. Otherwise,
1753 specify a number for either or both of these settings. If both are
1754 specified, @code{MAXCOLWIDTH} must be greater than or equal to
1755 @code{MINCOLWIDTH}. The default unit, or with @code{UNITS=POINTS}, is
1756 points (1/72 inch), or specify @code{UNITS=INCHES} to use inches or
1757 @code{UNITS=CM} for centimeters.
1759 By default, or with @code{EMPTY=ZERO}, zero values are displayed in
1760 their usual format. Use @code{EMPTY=BLANK} to use an empty cell
1761 instead, or @code{EMPTY="@i{string}"} to use the specified string.
1763 By default, missing values are displayed as @samp{.}, the same as in
1764 other tables. Specify @code{MISSING="@i{string}"} to instead use a
1767 @node CTABLES Display of Variable Labels
1768 @subsection Display of Variable Labels
1772 @t{VARIABLES=}@i{variables}
1773 @t{DISPLAY}=@{@t{DEFAULT} @math{|} @t{NAME} @math{|} @t{LABEL} @math{|} @t{BOTH} @math{|} @t{NONE}@}
1776 The @code{VLABELS} subcommand, which must precede the first
1777 @code{TABLE} subcommand, controls display of variable labels in all
1778 the output tables. @code{VLABELS} is optional. It may appear
1779 multiple times to adjust settings for different variables.
1781 @code{VARIABLES} and @code{DISPLAY} are required. The value of
1782 @code{DISPLAY} controls how variable labels are displayed for the
1783 variables listed on @code{VARIABLES}. The supported values are:
1787 Use the setting from @code{SET TVARS} (@pxref{SET TVARS}).
1790 Show only a variable name.
1793 Show only a variable label.
1796 Show variable name and label.
1802 @node CTABLES Missing Value Treatment
1803 @subsection Missing Value Treatment
1806 @t{/SMISSING} @{@t{VARIABLE} @math{|} @t{LISTWISE}@}
1809 The @code{SMISSING} subcommand, which must precede the first
1810 @code{TABLE} subcommand, controls treatment of missing values for
1811 scalar variables in producing all the output tables. @code{SMISSING}
1814 With @code{SMISSING=VARIABLE}, which is the default, missing values
1815 are excluded on a variable-by-variable basis. With
1816 @code{SMISSING=LISTWISE}, when stacked scalar variables are nested
1817 together with a categorical variable, a missing value for any of the
1818 scalar variables causes the case to be excluded for all of them.
1820 As an example, consider the following dataset, in which @samp{x} is a
1821 categorical variable and @samp{y} and @samp{z} are scale:
1823 @psppoutput{ctables18}
1826 With the default missing-value treatment, @samp{x}'s mean is 20, based
1827 on the values 10, 20, and 30, and @samp{y}'s mean is 50, based on 40,
1831 CTABLES /TABLE (y + z) > x.
1833 @psppoutput{ctables19}
1836 By adding @code{SMISSING=LISTWISE}, only cases where @samp{y} and
1837 @samp{z} are both non-missing are considered, so @samp{x}'s mean
1838 becomes 15, as the average of 10 and 20, and @samp{y}'s mean becomes
1839 55, the average of 50 and 60:
1842 CTABLES /SMISSING LISTWISE /TABLE (y + z) > x.
1844 @psppoutput{ctables20}
1847 Even with @code{SMISSING=LISTWISE}, if @samp{y} and @samp{z} are
1848 separately nested with @samp{x}, instead of using a single @samp{>}
1849 operator, missing values revert to being considered on a
1850 variable-by-variable basis:
1853 CTABLES /SMISSING LISTWISE /TABLE (y > x) + (z > x).
1855 @psppoutput{ctables21}
1857 @node CTABLES Computed Categories
1858 @subsection Computed Categories
1861 @t{/PCOMPUTE} @t{&}@i{postcompute}@t{=EXPR(}@i{expression}@t{)}
1864 @dfn{Computed categories}, also called @dfn{postcomputes}, are
1865 categories created using arithmetic on categories obtained from the
1866 data. The @code{PCOMPUTE} subcommand defines computed categories,
1867 which can then be used in two places: on @code{CATEGORIES} within an
1868 explicit category list (@pxref{CTABLES Explicit Category List}), and on
1869 the @code{PPROPERTIES} subcommand to define further properties for a
1872 @code{PCOMPUTE} must precede the first @code{TABLE} command. It is
1873 optional and it may be used any number of times to define multiple
1876 Each @code{PCOMPUTE} defines one postcompute. Its syntax consists of
1877 a name to identify the postcompute as a @pspp{} identifier prefixed by
1878 @samp{&}, followed by @samp{=} and a postcompute expression enclosed
1879 in @code{EXPR(@dots{})}. A postcompute expression consists of:
1882 @item [@i{category}]
1883 This form evaluates to the summary statistic for @i{category}, e.g.@:
1884 @code{[1]} evaluates to the value of the summary statistic associated
1885 with category 1. The @i{category} may be a number, a quoted string,
1886 or a quoted time or date value. All of the categories for a given
1887 postcompute must have the same form. The category must appear in all
1888 the @code{CATEGORIES} list in which the postcompute is used.
1890 @item [@i{min} THRU @i{max}]
1891 @itemx [LO THRU @i{max}]
1892 @itemx [@i{min} THRU HI]
1895 These forms evaluate to the summary statistics for a category
1896 specified with the same syntax, as described in previous section
1897 (@pxref{CTABLES Explicit Category List}). The category must appear in
1898 all the @code{CATEGORIES} list in which the postcompute is used.
1901 The summary statistic for the subtotal category. This form is allowed
1902 only if the @code{CATEGORIES} lists that include this postcompute have
1903 exactly one subtotal.
1905 @item SUBTOTAL[@i{index}]
1906 The summary statistic for subtotal category @i{index}, where 1 is the
1907 first subtotal, 2 is the second, and so on. This form may be used for
1908 @code{CATEGORIES} lists with any number of subtotals.
1911 The summary statistic for the total. The @code{CATEGORIES} lsits that
1912 include this postcompute must have a total enabled.
1915 @itemx @i{a} - @i{b}
1916 @itemx @i{a} * @i{b}
1917 @itemx @i{a} / @i{b}
1918 @itemx @i{a} ** @i{b}
1919 These forms perform arithmetic on the values of postcompute
1920 expressions @i{a} and @i{b}. The usual operator precedence rules
1924 Numeric constants may be used in postcompute expressions.
1927 Parentheses override operator precedence.
1930 A postcompute is not associated with any particular variable.
1931 Instead, it may be referenced within @code{CATEGORIES} for any
1932 suitable variable (e.g.@: only a string variable is suitable for a
1933 postcompute expression that refers to a string category, only a
1934 variable with subtotals for an expression that refers to subtotals,
1937 Normally a named postcompute is defined only once, but if a later
1938 @code{PCOMPUTE} redefines a postcompute with the same name as an
1939 earlier one, the later one take precedence.
1941 @node CTABLES Computed Category Properties
1942 @subsection Computed Category Properties
1945 @t{/PPROPERTIES} @t{&}@i{postcompute}@dots{}
1946 [@t{LABEL=}@i{string}]
1947 [@t{FORMAT=}[@i{summary} @i{format}]@dots{}]
1948 [@t{HIDESOURCECATS=}@{@t{NO} @math{|} @t{YES}@}
1951 The @code{PPROPERTIES} subcommand, which must appear before
1952 @code{TABLE}, sets properties for one or more postcomputes defined on
1953 prior @code{PCOMPUTE} subcommands. The subcommand syntax begins with
1954 the list of postcomputes, each prefixed with @samp{&} as specified on
1957 All of the settings on @code{PPROPERTIES} are optional. Use
1958 @code{LABEL} to set the label shown for the postcomputes in table
1959 output. The default label for a postcompute is the expression used to
1962 The @code{FORMAT} setting sets summary statistics and display formats
1963 for the postcomputes.
1965 By default, or with @code{HIDESOURCECATS=NO}, categories referred to
1966 by computed categories are displayed like other categories. Use
1967 @code{HIDESOURCECATS=YES} to hide them.
1969 @node CTABLES Base Weight
1970 @subsection Base Weight
1973 @t{/WEIGHT VARIABLE=}@i{variable}
1976 The @code{WEIGHT} subcommand is optional and must appear before
1977 @code{TABLE}. If it appears, it must name a numeric variable, known
1978 as the @dfn{effective base weight} or @dfn{adjustment weight}. The
1979 effective base weight variable stands in for the dictionary's weight
1980 variable (@pxref{WEIGHT}), if any, in most calculations in
1981 @code{CTABLES}. The only exceptions are the @code{COUNT},
1982 @code{TOTALN}, and @code{VALIDN} summary functions, which use the
1983 dictionary weight instead.
1985 Weights obtained from the @pspp{} dictionary are rounded to the
1986 nearest integer at the case level. Effective base weights are not
1987 rounded. Regardless of the weighting source, @pspp{} does not analyze
1988 cases with zero, missing, or negative effective weights.
1990 @node CTABLES Hiding Small Counts
1991 @subsection Hiding Small Counts
1994 @t{/HIDESMALLCOUNTS COUNT=@i{count}}
1997 The @code{HIDESMALLCOUNTS} subcommand is optional. If it specified,
1998 then count values in output tables less than the value of @i{count}
1999 are shown as @code{<@i{count}} instead of their true values. The
2000 value of @i{count} must be an integer and must be at least 2. Case
2001 weights are considered for deciding whether to hide a count.
2007 @cindex factor analysis
2008 @cindex principal components analysis
2009 @cindex principal axis factoring
2010 @cindex data reduction
2014 VARIABLES=@var{var_list},
2015 MATRIX IN (@{CORR,COV@}=@{*,@var{file_spec}@})
2018 [ /METHOD = @{CORRELATION, COVARIANCE@} ]
2020 [ /ANALYSIS=@var{var_list} ]
2022 [ /EXTRACTION=@{PC, PAF@}]
2024 [ /ROTATION=@{VARIMAX, EQUAMAX, QUARTIMAX, PROMAX[(@var{k})], NOROTATE@}]
2026 [ /PRINT=[INITIAL] [EXTRACTION] [ROTATION] [UNIVARIATE] [CORRELATION] [COVARIANCE] [DET] [KMO] [AIC] [SIG] [ALL] [DEFAULT] ]
2030 [ /FORMAT=[SORT] [BLANK(@var{n})] [DEFAULT] ]
2032 [ /CRITERIA=[FACTORS(@var{n})] [MINEIGEN(@var{l})] [ITERATE(@var{m})] [ECONVERGE (@var{delta})] [DEFAULT] ]
2034 [ /MISSING=[@{LISTWISE, PAIRWISE@}] [@{INCLUDE, EXCLUDE@}] ]
2037 The @cmd{FACTOR} command performs Factor Analysis or Principal Axis Factoring on a dataset. It may be used to find
2038 common factors in the data or for data reduction purposes.
2040 The @subcmd{VARIABLES} subcommand is required (unless the @subcmd{MATRIX IN}
2041 subcommand is used).
2042 It lists the variables which are to partake in the analysis. (The @subcmd{ANALYSIS}
2043 subcommand may optionally further limit the variables that
2044 participate; it is useful primarily in conjunction with @subcmd{MATRIX IN}.)
2046 If @subcmd{MATRIX IN} instead of @subcmd{VARIABLES} is specified, then the analysis
2047 is performed on a pre-prepared correlation or covariance matrix file instead of on
2048 individual data cases. Typically the matrix file will have been generated by
2049 @cmd{MATRIX DATA} (@pxref{MATRIX DATA}) or provided by a third party.
2050 If specified, @subcmd{MATRIX IN} must be followed by @samp{COV} or @samp{CORR},
2051 then by @samp{=} and @var{file_spec} all in parentheses.
2052 @var{file_spec} may either be an asterisk, which indicates the currently loaded
2053 dataset, or it may be a file name to be loaded. @xref{MATRIX DATA}, for the expected
2056 The @subcmd{/EXTRACTION} subcommand is used to specify the way in which factors
2057 (components) are extracted from the data.
2058 If @subcmd{PC} is specified, then Principal Components Analysis is used.
2059 If @subcmd{PAF} is specified, then Principal Axis Factoring is
2060 used. By default Principal Components Analysis is used.
2062 The @subcmd{/ROTATION} subcommand is used to specify the method by which the
2063 extracted solution is rotated. Three orthogonal rotation methods are available:
2064 @subcmd{VARIMAX} (which is the default), @subcmd{EQUAMAX}, and @subcmd{QUARTIMAX}.
2065 There is one oblique rotation method, @i{viz}: @subcmd{PROMAX}.
2066 Optionally you may enter the power of the promax rotation @var{k}, which must be enclosed in parentheses.
2067 The default value of @var{k} is 5.
2068 If you don't want any rotation to be performed, the word @subcmd{NOROTATE}
2069 prevents the command from performing any rotation on the data.
2071 The @subcmd{/METHOD} subcommand should be used to determine whether the
2072 covariance matrix or the correlation matrix of the data is
2073 to be analysed. By default, the correlation matrix is analysed.
2075 The @subcmd{/PRINT} subcommand may be used to select which features of the analysis are reported:
2078 @item @subcmd{UNIVARIATE}
2079 A table of mean values, standard deviations and total weights are printed.
2080 @item @subcmd{INITIAL}
2081 Initial communalities and eigenvalues are printed.
2082 @item @subcmd{EXTRACTION}
2083 Extracted communalities and eigenvalues are printed.
2084 @item @subcmd{ROTATION}
2085 Rotated communalities and eigenvalues are printed.
2086 @item @subcmd{CORRELATION}
2087 The correlation matrix is printed.
2088 @item @subcmd{COVARIANCE}
2089 The covariance matrix is printed.
2091 The determinant of the correlation or covariance matrix is printed.
2093 The anti-image covariance and anti-image correlation matrices are printed.
2095 The Kaiser-Meyer-Olkin measure of sampling adequacy and the Bartlett test of sphericity is printed.
2097 The significance of the elements of correlation matrix is printed.
2099 All of the above are printed.
2100 @item @subcmd{DEFAULT}
2101 Identical to @subcmd{INITIAL} and @subcmd{EXTRACTION}.
2104 If @subcmd{/PLOT=EIGEN} is given, then a ``Scree'' plot of the eigenvalues is
2105 printed. This can be useful for visualizing the factors and deciding
2106 which factors (components) should be retained.
2108 The @subcmd{/FORMAT} subcommand determined how data are to be
2109 displayed in loading matrices. If @subcmd{SORT} is specified, then
2110 the variables are sorted in descending order of significance. If
2111 @subcmd{BLANK(@var{n})} is specified, then coefficients whose absolute
2112 value is less than @var{n} are not printed. If the keyword
2113 @subcmd{DEFAULT} is specified, or if no @subcmd{/FORMAT} subcommand is
2114 specified, then no sorting is performed, and all coefficients are printed.
2116 You can use the @subcmd{/CRITERIA} subcommand to specify how the number of
2117 extracted factors (components) are chosen. If @subcmd{FACTORS(@var{n})} is
2118 specified, where @var{n} is an integer, then @var{n} factors are
2119 extracted. Otherwise, the @subcmd{MINEIGEN} setting is used.
2120 @subcmd{MINEIGEN(@var{l})} requests that all factors whose eigenvalues
2121 are greater than or equal to @var{l} are extracted. The default value
2122 of @var{l} is 1. The @subcmd{ECONVERGE} setting has effect only when
2123 using iterative algorithms for factor extraction (such as Principal Axis
2124 Factoring). @subcmd{ECONVERGE(@var{delta})} specifies that
2125 iteration should cease when the maximum absolute value of the
2126 communality estimate between one iteration and the previous is less
2127 than @var{delta}. The default value of @var{delta} is 0.001.
2129 The @subcmd{ITERATE(@var{m})} may appear any number of times and is
2130 used for two different purposes. It is used to set the maximum number
2131 of iterations (@var{m}) for convergence and also to set the maximum
2132 number of iterations for rotation.
2133 Whether it affects convergence or rotation depends upon which
2134 subcommand follows the @subcmd{ITERATE} subcommand.
2135 If @subcmd{EXTRACTION} follows, it affects convergence.
2136 If @subcmd{ROTATION} follows, it affects rotation.
2137 If neither @subcmd{ROTATION} nor @subcmd{EXTRACTION} follow a
2138 @subcmd{ITERATE} subcommand, then the entire subcommand is ignored.
2139 The default value of @var{m} is 25.
2141 The @cmd{MISSING} subcommand determines the handling of missing
2142 variables. If @subcmd{INCLUDE} is set, then user-missing values are
2143 included in the calculations, but system-missing values are not.
2144 If @subcmd{EXCLUDE} is set, which is the default, user-missing
2145 values are excluded as well as system-missing values. This is the
2146 default. If @subcmd{LISTWISE} is set, then the entire case is excluded
2147 from analysis whenever any variable specified in the @cmd{VARIABLES}
2148 subcommand contains a missing value.
2150 If @subcmd{PAIRWISE} is set, then a case is considered missing only if
2151 either of the values for the particular coefficient are missing.
2152 The default is @subcmd{LISTWISE}.
2158 @cindex univariate analysis of variance
2159 @cindex fixed effects
2160 @cindex factorial anova
2161 @cindex analysis of variance
2166 GLM @var{dependent_vars} BY @var{fixed_factors}
2167 [/METHOD = SSTYPE(@var{type})]
2168 [/DESIGN = @var{interaction_0} [@var{interaction_1} [... @var{interaction_n}]]]
2169 [/INTERCEPT = @{INCLUDE|EXCLUDE@}]
2170 [/MISSING = @{INCLUDE|EXCLUDE@}]
2173 The @cmd{GLM} procedure can be used for fixed effects factorial Anova.
2175 The @var{dependent_vars} are the variables to be analysed.
2176 You may analyse several variables in the same command in which case they should all
2177 appear before the @code{BY} keyword.
2179 The @var{fixed_factors} list must be one or more categorical variables. Normally it
2180 does not make sense to enter a scalar variable in the @var{fixed_factors} and doing
2181 so may cause @pspp{} to do a lot of unnecessary processing.
2183 The @subcmd{METHOD} subcommand is used to change the method for producing the sums of
2184 squares. Available values of @var{type} are 1, 2 and 3. The default is type 3.
2186 You may specify a custom design using the @subcmd{DESIGN} subcommand.
2187 The design comprises a list of interactions where each interaction is a
2188 list of variables separated by a @samp{*}. For example the command
2190 GLM subject BY sex age_group race
2191 /DESIGN = age_group sex group age_group*sex age_group*race
2193 @noindent specifies the model @math{subject = age_group + sex + race + age_group*sex + age_group*race}.
2194 If no @subcmd{DESIGN} subcommand is specified, then the default is all possible combinations
2195 of the fixed factors. That is to say
2197 GLM subject BY sex age_group race
2200 @math{subject = age_group + sex + race + age_group*sex + age_group*race + sex*race + age_group*sex*race}.
2203 The @subcmd{MISSING} subcommand determines the handling of missing
2205 If @subcmd{INCLUDE} is set then, for the purposes of GLM analysis,
2206 only system-missing values are considered
2207 to be missing; user-missing values are not regarded as missing.
2208 If @subcmd{EXCLUDE} is set, which is the default, then user-missing
2209 values are considered to be missing as well as system-missing values.
2210 A case for which any dependent variable or any factor
2211 variable has a missing value is excluded from the analysis.
2213 @node LOGISTIC REGRESSION
2214 @section LOGISTIC REGRESSION
2216 @vindex LOGISTIC REGRESSION
2217 @cindex logistic regression
2218 @cindex bivariate logistic regression
2221 LOGISTIC REGRESSION [VARIABLES =] @var{dependent_var} WITH @var{predictors}
2223 [/CATEGORICAL = @var{categorical_predictors}]
2225 [@{/NOCONST | /ORIGIN | /NOORIGIN @}]
2227 [/PRINT = [SUMMARY] [DEFAULT] [CI(@var{confidence})] [ALL]]
2229 [/CRITERIA = [BCON(@var{min_delta})] [ITERATE(@var{max_interations})]
2230 [LCON(@var{min_likelihood_delta})] [EPS(@var{min_epsilon})]
2231 [CUT(@var{cut_point})]]
2233 [/MISSING = @{INCLUDE|EXCLUDE@}]
2236 Bivariate Logistic Regression is used when you want to explain a dichotomous dependent
2237 variable in terms of one or more predictor variables.
2239 The minimum command is
2241 LOGISTIC REGRESSION @var{y} WITH @var{x1} @var{x2} @dots{} @var{xn}.
2243 Here, @var{y} is the dependent variable, which must be dichotomous and @var{x1} @dots{} @var{xn}
2244 are the predictor variables whose coefficients the procedure estimates.
2246 By default, a constant term is included in the model.
2247 Hence, the full model is
2250 = b_0 + b_1 {\bf x_1}
2256 Predictor variables which are categorical in nature should be listed on the @subcmd{/CATEGORICAL} subcommand.
2257 Simple variables as well as interactions between variables may be listed here.
2259 If you want a model without the constant term @math{b_0}, use the keyword @subcmd{/ORIGIN}.
2260 @subcmd{/NOCONST} is a synonym for @subcmd{/ORIGIN}.
2262 An iterative Newton-Raphson procedure is used to fit the model.
2263 The @subcmd{/CRITERIA} subcommand is used to specify the stopping criteria of the procedure,
2264 and other parameters.
2265 The value of @var{cut_point} is used in the classification table. It is the
2266 threshold above which predicted values are considered to be 1. Values
2267 of @var{cut_point} must lie in the range [0,1].
2268 During iterations, if any one of the stopping criteria are satisfied, the procedure is
2269 considered complete.
2270 The stopping criteria are:
2272 @item The number of iterations exceeds @var{max_iterations}.
2273 The default value of @var{max_iterations} is 20.
2274 @item The change in the all coefficient estimates are less than @var{min_delta}.
2275 The default value of @var{min_delta} is 0.001.
2276 @item The magnitude of change in the likelihood estimate is less than @var{min_likelihood_delta}.
2277 The default value of @var{min_delta} is zero.
2278 This means that this criterion is disabled.
2279 @item The differential of the estimated probability for all cases is less than @var{min_epsilon}.
2280 In other words, the probabilities are close to zero or one.
2281 The default value of @var{min_epsilon} is 0.00000001.
2285 The @subcmd{PRINT} subcommand controls the display of optional statistics.
2286 Currently there is one such option, @subcmd{CI}, which indicates that the
2287 confidence interval of the odds ratio should be displayed as well as its value.
2288 @subcmd{CI} should be followed by an integer in parentheses, to indicate the
2289 confidence level of the desired confidence interval.
2291 The @subcmd{MISSING} subcommand determines the handling of missing
2293 If @subcmd{INCLUDE} is set, then user-missing values are included in the
2294 calculations, but system-missing values are not.
2295 If @subcmd{EXCLUDE} is set, which is the default, user-missing
2296 values are excluded as well as system-missing values.
2297 This is the default.
2308 [ BY @{@var{var_list}@} [BY @{@var{var_list}@} [BY @{@var{var_list}@} @dots{} ]]]
2310 [ /@{@var{var_list}@}
2311 [ BY @{@var{var_list}@} [BY @{@var{var_list}@} [BY @{@var{var_list}@} @dots{} ]]] ]
2313 [/CELLS = [MEAN] [COUNT] [STDDEV] [SEMEAN] [SUM] [MIN] [MAX] [RANGE]
2314 [VARIANCE] [KURT] [SEKURT]
2315 [SKEW] [SESKEW] [FIRST] [LAST]
2316 [HARMONIC] [GEOMETRIC]
2321 [/MISSING = [INCLUDE] [DEPENDENT]]
2324 You can use the @cmd{MEANS} command to calculate the arithmetic mean and similar
2325 statistics, either for the dataset as a whole or for categories of data.
2327 The simplest form of the command is
2331 @noindent which calculates the mean, count and standard deviation for @var{v}.
2332 If you specify a grouping variable, for example
2334 MEANS @var{v} BY @var{g}.
2336 @noindent then the means, counts and standard deviations for @var{v} after having
2337 been grouped by @var{g} are calculated.
2338 Instead of the mean, count and standard deviation, you could specify the statistics
2339 in which you are interested:
2341 MEANS @var{x} @var{y} BY @var{g}
2342 /CELLS = HARMONIC SUM MIN.
2344 This example calculates the harmonic mean, the sum and the minimum values of @var{x} and @var{y}
2347 The @subcmd{CELLS} subcommand specifies which statistics to calculate. The available statistics
2351 @cindex arithmetic mean
2352 The arithmetic mean.
2353 @item @subcmd{COUNT}
2354 The count of the values.
2355 @item @subcmd{STDDEV}
2356 The standard deviation.
2357 @item @subcmd{SEMEAN}
2358 The standard error of the mean.
2360 The sum of the values.
2365 @item @subcmd{RANGE}
2366 The difference between the maximum and minimum values.
2367 @item @subcmd{VARIANCE}
2369 @item @subcmd{FIRST}
2370 The first value in the category.
2372 The last value in the category.
2375 @item @subcmd{SESKEW}
2376 The standard error of the skewness.
2379 @item @subcmd{SEKURT}
2380 The standard error of the kurtosis.
2381 @item @subcmd{HARMONIC}
2382 @cindex harmonic mean
2384 @item @subcmd{GEOMETRIC}
2385 @cindex geometric mean
2389 In addition, three special keywords are recognized:
2391 @item @subcmd{DEFAULT}
2392 This is the same as @subcmd{MEAN} @subcmd{COUNT} @subcmd{STDDEV}.
2394 All of the above statistics are calculated.
2396 No statistics are calculated (only a summary is shown).
2400 More than one @dfn{table} can be specified in a single command.
2401 Each table is separated by a @samp{/}. For
2405 @var{c} @var{d} @var{e} BY @var{x}
2406 /@var{a} @var{b} BY @var{x} @var{y}
2407 /@var{f} BY @var{y} BY @var{z}.
2409 has three tables (the @samp{TABLE =} is optional).
2410 The first table has three dependent variables @var{c}, @var{d} and @var{e}
2411 and a single categorical variable @var{x}.
2412 The second table has two dependent variables @var{a} and @var{b},
2413 and two categorical variables @var{x} and @var{y}.
2414 The third table has a single dependent variables @var{f}
2415 and a categorical variable formed by the combination of @var{y} and @var{z}.
2418 By default values are omitted from the analysis only if missing values
2419 (either system missing or user missing)
2420 for any of the variables directly involved in their calculation are
2422 This behaviour can be modified with the @subcmd{/MISSING} subcommand.
2423 Three options are possible: @subcmd{TABLE}, @subcmd{INCLUDE} and @subcmd{DEPENDENT}.
2425 @subcmd{/MISSING = INCLUDE} says that user missing values, either in the dependent
2426 variables or in the categorical variables should be taken at their face
2427 value, and not excluded.
2429 @subcmd{/MISSING = DEPENDENT} says that user missing values, in the dependent
2430 variables should be taken at their face value, however cases which
2431 have user missing values for the categorical variables should be omitted
2432 from the calculation.
2434 @subsection Example Means
2436 The dataset in @file{repairs.sav} contains the mean time between failures (@exvar{mtbf})
2437 for a sample of artifacts produced by different factories and trialed under
2438 different operating conditions.
2439 Since there are four combinations of categorical variables, by simply looking
2440 at the list of data, it would be hard to how the scores vary for each category.
2441 @ref{means:ex} shows one way of tabulating the @exvar{mtbf} in a way which is
2442 easier to understand.
2444 @float Example, means:ex
2445 @psppsyntax {means.sps}
2446 @caption {Running @cmd{MEANS} on the @exvar{mtbf} score with categories @exvar{factory} and @exvar{environment}}
2449 The results are shown in @ref{means:res}. The figures shown indicate the mean,
2450 standard deviation and number of samples in each category.
2451 These figures however do not indicate whether the results are statistically
2452 significant. For that, you would need to use the procedures @cmd{ONEWAY}, @cmd{GLM} or
2453 @cmd{T-TEST} depending on the hypothesis being tested.
2455 @float Result, means:res
2457 @caption {The @exvar{mtbf} categorised by @exvar{factory} and @exvar{environment}}
2460 Note that there is no limit to the number of variables for which you can calculate
2461 statistics, nor to the number of categorical variables per layer, nor the number
2463 However, running @cmd{MEANS} on a large numbers of variables, or with categorical variables
2464 containing a large number of distinct values may result in an extremely large output, which
2465 will not be easy to interpret.
2466 So you should consider carefully which variables to select for participation in the analysis.
2472 @cindex nonparametric tests
2477 nonparametric test subcommands
2482 [ /STATISTICS=@{DESCRIPTIVES@} ]
2484 [ /MISSING=@{ANALYSIS, LISTWISE@} @{INCLUDE, EXCLUDE@} ]
2486 [ /METHOD=EXACT [ TIMER [(@var{n})] ] ]
2489 @cmd{NPAR TESTS} performs nonparametric tests.
2490 Non parametric tests make very few assumptions about the distribution of the
2492 One or more tests may be specified by using the corresponding subcommand.
2493 If the @subcmd{/STATISTICS} subcommand is also specified, then summary statistics are
2494 produces for each variable that is the subject of any test.
2496 Certain tests may take a long time to execute, if an exact figure is required.
2497 Therefore, by default asymptotic approximations are used unless the
2498 subcommand @subcmd{/METHOD=EXACT} is specified.
2499 Exact tests give more accurate results, but may take an unacceptably long
2500 time to perform. If the @subcmd{TIMER} keyword is used, it sets a maximum time,
2501 after which the test is abandoned, and a warning message printed.
2502 The time, in minutes, should be specified in parentheses after the @subcmd{TIMER} keyword.
2503 If the @subcmd{TIMER} keyword is given without this figure, then a default value of 5 minutes
2508 * BINOMIAL:: Binomial Test
2509 * CHISQUARE:: Chi-square Test
2510 * COCHRAN:: Cochran Q Test
2511 * FRIEDMAN:: Friedman Test
2512 * KENDALL:: Kendall's W Test
2513 * KOLMOGOROV-SMIRNOV:: Kolmogorov Smirnov Test
2514 * KRUSKAL-WALLIS:: Kruskal-Wallis Test
2515 * MANN-WHITNEY:: Mann Whitney U Test
2516 * MCNEMAR:: McNemar Test
2517 * MEDIAN:: Median Test
2519 * SIGN:: The Sign Test
2520 * WILCOXON:: Wilcoxon Signed Ranks Test
2525 @subsection Binomial test
2527 @cindex binomial test
2530 [ /BINOMIAL[(@var{p})]=@var{var_list}[(@var{value1}[, @var{value2})] ] ]
2533 The @subcmd{/BINOMIAL} subcommand compares the observed distribution of a dichotomous
2534 variable with that of a binomial distribution.
2535 The variable @var{p} specifies the test proportion of the binomial
2537 The default value of 0.5 is assumed if @var{p} is omitted.
2539 If a single value appears after the variable list, then that value is
2540 used as the threshold to partition the observed values. Values less
2541 than or equal to the threshold value form the first category. Values
2542 greater than the threshold form the second category.
2544 If two values appear after the variable list, then they are used
2545 as the values which a variable must take to be in the respective
2547 Cases for which a variable takes a value equal to neither of the specified
2548 values, take no part in the test for that variable.
2550 If no values appear, then the variable must assume dichotomous
2552 If more than two distinct, non-missing values for a variable
2553 under test are encountered then an error occurs.
2555 If the test proportion is equal to 0.5, then a two tailed test is
2556 reported. For any other test proportion, a one tailed test is
2558 For one tailed tests, if the test proportion is less than
2559 or equal to the observed proportion, then the significance of
2560 observing the observed proportion or more is reported.
2561 If the test proportion is more than the observed proportion, then the
2562 significance of observing the observed proportion or less is reported.
2563 That is to say, the test is always performed in the observed
2566 @pspp{} uses a very precise approximation to the gamma function to
2567 compute the binomial significance. Thus, exact results are reported
2568 even for very large sample sizes.
2572 @subsection Chi-square Test
2574 @cindex chi-square test
2578 [ /CHISQUARE=@var{var_list}[(@var{lo},@var{hi})] [/EXPECTED=@{EQUAL|@var{f1}, @var{f2} @dots{} @var{fn}@}] ]
2582 The @subcmd{/CHISQUARE} subcommand produces a chi-square statistic for the differences
2583 between the expected and observed frequencies of the categories of a variable.
2584 Optionally, a range of values may appear after the variable list.
2585 If a range is given, then non integer values are truncated, and values
2586 outside the specified range are excluded from the analysis.
2588 The @subcmd{/EXPECTED} subcommand specifies the expected values of each
2590 There must be exactly one non-zero expected value, for each observed
2591 category, or the @subcmd{EQUAL} keyword must be specified.
2592 You may use the notation @subcmd{@var{n}*@var{f}} to specify @var{n}
2593 consecutive expected categories all taking a frequency of @var{f}.
2594 The frequencies given are proportions, not absolute frequencies. The
2595 sum of the frequencies need not be 1.
2596 If no @subcmd{/EXPECTED} subcommand is given, then equal frequencies
2599 @subsubsection Chi-square Example
2601 A researcher wishes to investigate whether there are an equal number of
2602 persons of each sex in a population. The sample chosen for invesigation
2603 is that from the @file {physiology.sav} dataset. The null hypothesis for
2604 the test is that the population comprises an equal number of males and females.
2605 The analysis is performed as shown in @ref{chisquare:ex}.
2607 @float Example, chisquare:ex
2608 @psppsyntax {chisquare.sps}
2609 @caption {Performing a chi-square test to check for equal distribution of sexes}
2612 There is only one test variable, @i{viz:} @exvar{sex}. The other variables in the dataset
2615 @float Screenshot, chisquare:scr
2616 @psppimage {chisquare}
2617 @caption {Performing a chi-square test using the graphic user interface}
2620 In @ref{chisquare:res} the summary box shows that in the sample, there are more males
2621 than females. However the significance of chi-square result is greater than 0.05
2622 --- the most commonly accepted p-value --- and therefore
2623 there is not enough evidence to reject the null hypothesis and one must conclude
2624 that the evidence does not indicate that there is an imbalance of the sexes
2627 @float Result, chisquare:res
2628 @psppoutput {chisquare}
2629 @caption {The results of running a chi-square test on @exvar{sex}}
2634 @subsection Cochran Q Test
2636 @cindex Cochran Q test
2637 @cindex Q, Cochran Q
2640 [ /COCHRAN = @var{var_list} ]
2643 The Cochran Q test is used to test for differences between three or more groups.
2644 The data for @var{var_list} in all cases must assume exactly two
2645 distinct values (other than missing values).
2647 The value of Q is displayed along with its Asymptotic significance
2648 based on a chi-square distribution.
2651 @subsection Friedman Test
2653 @cindex Friedman test
2656 [ /FRIEDMAN = @var{var_list} ]
2659 The Friedman test is used to test for differences between repeated measures when
2660 there is no indication that the distributions are normally distributed.
2662 A list of variables which contain the measured data must be given. The procedure
2663 prints the sum of ranks for each variable, the test statistic and its significance.
2666 @subsection Kendall's W Test
2668 @cindex Kendall's W test
2669 @cindex coefficient of concordance
2672 [ /KENDALL = @var{var_list} ]
2675 The Kendall test investigates whether an arbitrary number of related samples come from the
2677 It is identical to the Friedman test except that the additional statistic W, Kendall's Coefficient of Concordance is printed.
2678 It has the range [0,1] --- a value of zero indicates no agreement between the samples whereas a value of
2679 unity indicates complete agreement.
2682 @node KOLMOGOROV-SMIRNOV
2683 @subsection Kolmogorov-Smirnov Test
2684 @vindex KOLMOGOROV-SMIRNOV
2686 @cindex Kolmogorov-Smirnov test
2689 [ /KOLMOGOROV-SMIRNOV (@{NORMAL [@var{mu}, @var{sigma}], UNIFORM [@var{min}, @var{max}], POISSON [@var{lambda}], EXPONENTIAL [@var{scale}] @}) = @var{var_list} ]
2692 The one sample Kolmogorov-Smirnov subcommand is used to test whether or not a dataset is
2693 drawn from a particular distribution. Four distributions are supported, @i{viz:}
2694 Normal, Uniform, Poisson and Exponential.
2696 Ideally you should provide the parameters of the distribution against
2697 which you wish to test the data. For example, with the normal
2698 distribution the mean (@var{mu})and standard deviation (@var{sigma})
2699 should be given; with the uniform distribution, the minimum
2700 (@var{min})and maximum (@var{max}) value should be provided.
2701 However, if the parameters are omitted they are imputed from the
2702 data. Imputing the parameters reduces the power of the test so should
2703 be avoided if possible.
2705 In the following example, two variables @var{score} and @var{age} are
2706 tested to see if they follow a normal distribution with a mean of 3.5
2707 and a standard deviation of 2.0.
2710 /KOLMOGOROV-SMIRNOV (normal 3.5 2.0) = @var{score} @var{age}.
2712 If the variables need to be tested against different distributions, then a separate
2713 subcommand must be used. For example the following syntax tests @var{score} against
2714 a normal distribution with mean of 3.5 and standard deviation of 2.0 whilst @var{age}
2715 is tested against a normal distribution of mean 40 and standard deviation 1.5.
2718 /KOLMOGOROV-SMIRNOV (normal 3.5 2.0) = @var{score}
2719 /KOLMOGOROV-SMIRNOV (normal 40 1.5) = @var{age}.
2722 The abbreviated subcommand @subcmd{K-S} may be used in place of @subcmd{KOLMOGOROV-SMIRNOV}.
2724 @node KRUSKAL-WALLIS
2725 @subsection Kruskal-Wallis Test
2726 @vindex KRUSKAL-WALLIS
2728 @cindex Kruskal-Wallis test
2731 [ /KRUSKAL-WALLIS = @var{var_list} BY var (@var{lower}, @var{upper}) ]
2734 The Kruskal-Wallis test is used to compare data from an
2735 arbitrary number of populations. It does not assume normality.
2736 The data to be compared are specified by @var{var_list}.
2737 The categorical variable determining the groups to which the
2738 data belongs is given by @var{var}. The limits @var{lower} and
2739 @var{upper} specify the valid range of @var{var}.
2740 If @var{upper} is smaller than @var{lower}, the PSPP will assume their values
2741 to be reversed. Any cases for which @var{var} falls outside
2742 [@var{lower}, @var{upper}] are ignored.
2744 The mean rank of each group as well as the chi-squared value and
2745 significance of the test are printed.
2746 The abbreviated subcommand @subcmd{K-W} may be used in place of
2747 @subcmd{KRUSKAL-WALLIS}.
2751 @subsection Mann-Whitney U Test
2752 @vindex MANN-WHITNEY
2754 @cindex Mann-Whitney U test
2755 @cindex U, Mann-Whitney U
2758 [ /MANN-WHITNEY = @var{var_list} BY var (@var{group1}, @var{group2}) ]
2761 The Mann-Whitney subcommand is used to test whether two groups of data
2762 come from different populations. The variables to be tested should be
2763 specified in @var{var_list} and the grouping variable, that determines
2764 to which group the test variables belong, in @var{var}.
2765 @var{Var} may be either a string or an alpha variable.
2766 @var{Group1} and @var{group2} specify the
2767 two values of @var{var} which determine the groups of the test data.
2768 Cases for which the @var{var} value is neither @var{group1} or
2769 @var{group2} are ignored.
2771 The value of the Mann-Whitney U statistic, the Wilcoxon W, and the
2772 significance are printed.
2773 You may abbreviated the subcommand @subcmd{MANN-WHITNEY} to
2778 @subsection McNemar Test
2780 @cindex McNemar test
2783 [ /MCNEMAR @var{var_list} [ WITH @var{var_list} [ (PAIRED) ]]]
2786 Use McNemar's test to analyse the significance of the difference between
2787 pairs of correlated proportions.
2789 If the @code{WITH} keyword is omitted, then tests for all
2790 combinations of the listed variables are performed.
2791 If the @code{WITH} keyword is given, and the @code{(PAIRED)} keyword
2792 is also given, then the number of variables preceding @code{WITH}
2793 must be the same as the number following it.
2794 In this case, tests for each respective pair of variables are
2796 If the @code{WITH} keyword is given, but the
2797 @code{(PAIRED)} keyword is omitted, then tests for each combination
2798 of variable preceding @code{WITH} against variable following
2799 @code{WITH} are performed.
2801 The data in each variable must be dichotomous. If there are more
2802 than two distinct variables an error will occur and the test will
2806 @subsection Median Test
2811 [ /MEDIAN [(@var{value})] = @var{var_list} BY @var{variable} (@var{value1}, @var{value2}) ]
2814 The median test is used to test whether independent samples come from
2815 populations with a common median.
2816 The median of the populations against which the samples are to be tested
2817 may be given in parentheses immediately after the
2818 @subcmd{/MEDIAN} subcommand. If it is not given, the median is imputed from the
2819 union of all the samples.
2821 The variables of the samples to be tested should immediately follow the @samp{=} sign. The
2822 keyword @code{BY} must come next, and then the grouping variable. Two values
2823 in parentheses should follow. If the first value is greater than the second,
2824 then a 2 sample test is performed using these two values to determine the groups.
2825 If however, the first variable is less than the second, then a @i{k} sample test is
2826 conducted and the group values used are all values encountered which lie in the
2827 range [@var{value1},@var{value2}].
2831 @subsection Runs Test
2836 [ /RUNS (@{MEAN, MEDIAN, MODE, @var{value}@}) = @var{var_list} ]
2839 The @subcmd{/RUNS} subcommand tests whether a data sequence is randomly ordered.
2841 It works by examining the number of times a variable's value crosses a given threshold.
2842 The desired threshold must be specified within parentheses.
2843 It may either be specified as a number or as one of @subcmd{MEAN}, @subcmd{MEDIAN} or @subcmd{MODE}.
2844 Following the threshold specification comes the list of variables whose values are to be
2847 The subcommand shows the number of runs, the asymptotic significance based on the
2851 @subsection Sign Test
2856 [ /SIGN @var{var_list} [ WITH @var{var_list} [ (PAIRED) ]]]
2859 The @subcmd{/SIGN} subcommand tests for differences between medians of the
2861 The test does not make any assumptions about the
2862 distribution of the data.
2864 If the @code{WITH} keyword is omitted, then tests for all
2865 combinations of the listed variables are performed.
2866 If the @code{WITH} keyword is given, and the @code{(PAIRED)} keyword
2867 is also given, then the number of variables preceding @code{WITH}
2868 must be the same as the number following it.
2869 In this case, tests for each respective pair of variables are
2871 If the @code{WITH} keyword is given, but the
2872 @code{(PAIRED)} keyword is omitted, then tests for each combination
2873 of variable preceding @code{WITH} against variable following
2874 @code{WITH} are performed.
2877 @subsection Wilcoxon Matched Pairs Signed Ranks Test
2879 @cindex wilcoxon matched pairs signed ranks test
2882 [ /WILCOXON @var{var_list} [ WITH @var{var_list} [ (PAIRED) ]]]
2885 The @subcmd{/WILCOXON} subcommand tests for differences between medians of the
2887 The test does not make any assumptions about the variances of the samples.
2888 It does however assume that the distribution is symmetrical.
2890 If the @subcmd{WITH} keyword is omitted, then tests for all
2891 combinations of the listed variables are performed.
2892 If the @subcmd{WITH} keyword is given, and the @subcmd{(PAIRED)} keyword
2893 is also given, then the number of variables preceding @subcmd{WITH}
2894 must be the same as the number following it.
2895 In this case, tests for each respective pair of variables are
2897 If the @subcmd{WITH} keyword is given, but the
2898 @subcmd{(PAIRED)} keyword is omitted, then tests for each combination
2899 of variable preceding @subcmd{WITH} against variable following
2900 @subcmd{WITH} are performed.
2909 /MISSING=@{ANALYSIS,LISTWISE@} @{EXCLUDE,INCLUDE@}
2910 /CRITERIA=CI(@var{confidence})
2914 TESTVAL=@var{test_value}
2915 /VARIABLES=@var{var_list}
2918 (Independent Samples mode.)
2919 GROUPS=var(@var{value1} [, @var{value2}])
2920 /VARIABLES=@var{var_list}
2923 (Paired Samples mode.)
2924 PAIRS=@var{var_list} [WITH @var{var_list} [(PAIRED)] ]
2929 The @cmd{T-TEST} procedure outputs tables used in testing hypotheses about
2931 It operates in one of three modes:
2933 @item One Sample mode.
2934 @item Independent Groups mode.
2939 Each of these modes are described in more detail below.
2940 There are two optional subcommands which are common to all modes.
2942 The @cmd{/CRITERIA} subcommand tells @pspp{} the confidence interval used
2943 in the tests. The default value is 0.95.
2946 The @cmd{MISSING} subcommand determines the handling of missing
2948 If @subcmd{INCLUDE} is set, then user-missing values are included in the
2949 calculations, but system-missing values are not.
2950 If @subcmd{EXCLUDE} is set, which is the default, user-missing
2951 values are excluded as well as system-missing values.
2952 This is the default.
2954 If @subcmd{LISTWISE} is set, then the entire case is excluded from analysis
2955 whenever any variable specified in the @subcmd{/VARIABLES}, @subcmd{/PAIRS} or
2956 @subcmd{/GROUPS} subcommands contains a missing value.
2957 If @subcmd{ANALYSIS} is set, then missing values are excluded only in the analysis for
2958 which they would be needed. This is the default.
2962 * One Sample Mode:: Testing against a hypothesized mean
2963 * Independent Samples Mode:: Testing two independent groups for equal mean
2964 * Paired Samples Mode:: Testing two interdependent groups for equal mean
2967 @node One Sample Mode
2968 @subsection One Sample Mode
2970 The @subcmd{TESTVAL} subcommand invokes the One Sample mode.
2971 This mode is used to test a population mean against a hypothesized
2973 The value given to the @subcmd{TESTVAL} subcommand is the value against
2974 which you wish to test.
2975 In this mode, you must also use the @subcmd{/VARIABLES} subcommand to
2976 tell @pspp{} which variables you wish to test.
2978 @subsubsection Example - One Sample T-test
2980 A researcher wishes to know whether the weight of persons in a population
2981 is different from the national average.
2982 The samples are drawn from the population under investigation and recorded
2983 in the file @file{physiology.sav}.
2984 From the Department of Health, she
2985 knows that the national average weight of healthy adults is 76.8kg.
2986 Accordingly the @subcmd{TESTVAL} is set to 76.8.
2987 The null hypothesis therefore is that the mean average weight of the
2988 population from which the sample was drawn is 76.8kg.
2990 As previously noted (@pxref{Identifying incorrect data}), one
2991 sample in the dataset contains a weight value
2992 which is clearly incorrect. So this is excluded from the analysis
2993 using the @cmd{SELECT} command.
2995 @float Example, one-sample-t:ex
2996 @psppsyntax {one-sample-t.sps}
2997 @caption {Running a one sample T-Test after excluding all non-positive values}
3000 @float Screenshot, one-sample-t:scr
3001 @psppimage {one-sample-t}
3002 @caption {Using the One Sample T-Test dialog box to test @exvar{weight} for a mean of 76.8kg}
3006 @ref{one-sample-t:res} shows that the mean of our sample differs from the test value
3007 by -1.40kg. However the significance is very high (0.610). So one cannot
3008 reject the null hypothesis, and must conclude there is not enough evidence
3009 to suggest that the mean weight of the persons in our population is different
3012 @float Results, one-sample-t:res
3013 @psppoutput {one-sample-t}
3014 @caption {The results of a one sample T-test of @exvar{weight} using a test value of 76.8kg}
3017 @node Independent Samples Mode
3018 @subsection Independent Samples Mode
3020 The @subcmd{GROUPS} subcommand invokes Independent Samples mode or
3022 This mode is used to test whether two groups of values have the
3023 same population mean.
3024 In this mode, you must also use the @subcmd{/VARIABLES} subcommand to
3025 tell @pspp{} the dependent variables you wish to test.
3027 The variable given in the @subcmd{GROUPS} subcommand is the independent
3028 variable which determines to which group the samples belong.
3029 The values in parentheses are the specific values of the independent
3030 variable for each group.
3031 If the parentheses are omitted and no values are given, the default values
3032 of 1.0 and 2.0 are assumed.
3034 If the independent variable is numeric,
3035 it is acceptable to specify only one value inside the parentheses.
3036 If you do this, cases where the independent variable is
3037 greater than or equal to this value belong to the first group, and cases
3038 less than this value belong to the second group.
3039 When using this form of the @subcmd{GROUPS} subcommand, missing values in
3040 the independent variable are excluded on a listwise basis, regardless
3041 of whether @subcmd{/MISSING=LISTWISE} was specified.
3043 @subsubsection Example - Independent Samples T-test
3045 A researcher wishes to know whether within a population, adult males
3046 are taller than adult females.
3047 The samples are drawn from the population under investigation and recorded
3048 in the file @file{physiology.sav}.
3050 As previously noted (@pxref{Identifying incorrect data}), one
3051 sample in the dataset contains a height value
3052 which is clearly incorrect. So this is excluded from the analysis
3053 using the @cmd{SELECT} command.
3056 @float Example, indepdendent-samples-t:ex
3057 @psppsyntax {independent-samples-t.sps}
3058 @caption {Running a independent samples T-Test after excluding all observations less than 200kg}
3062 The null hypothesis is that both males and females are on average
3065 @float Screenshot, independent-samples-t:scr
3066 @psppimage {independent-samples-t}
3067 @caption {Using the Independent Sample T-test dialog, to test for differences of @exvar{height} between values of @exvar{sex}}
3071 In this case, the grouping variable is @exvar{sex}, so this is entered
3072 as the variable for the @subcmd{GROUP} subcommand. The group values are 0 (male) and
3075 If you are running the proceedure using syntax, then you need to enter
3076 the values corresponding to each group within parentheses.
3077 If you are using the graphic user interface, then you have to open
3078 the ``Define Groups'' dialog box and enter the values corresponding
3079 to each group as shown in @ref{define-groups-t:scr}. If, as in this case, the dataset has defined value
3080 labels for the group variable, then you can enter them by label
3083 @float Screenshot, define-groups-t:scr
3084 @psppimage {define-groups-t}
3085 @caption {Setting the values of the grouping variable for an Independent Samples T-test}
3088 From @ref{independent-samples-t:res}, one can clearly see that the @emph{sample} mean height
3089 is greater for males than for females. However in order to see if this
3090 is a significant result, one must consult the T-Test table.
3092 The T-Test table contains two rows; one for use if the variance of the samples
3093 in each group may be safely assumed to be equal, and the second row
3094 if the variances in each group may not be safely assumed to be equal.
3096 In this case however, both rows show a 2-tailed significance less than 0.001 and
3097 one must therefore reject the null hypothesis and conclude that within
3098 the population the mean height of males and of females are unequal.
3100 @float Result, independent-samples-t:res
3101 @psppoutput {independent-samples-t}
3102 @caption {The results of an independent samples T-test of @exvar{height} by @exvar{sex}}
3105 @node Paired Samples Mode
3106 @subsection Paired Samples Mode
3108 The @cmd{PAIRS} subcommand introduces Paired Samples mode.
3109 Use this mode when repeated measures have been taken from the same
3111 If the @subcmd{WITH} keyword is omitted, then tables for all
3112 combinations of variables given in the @cmd{PAIRS} subcommand are
3114 If the @subcmd{WITH} keyword is given, and the @subcmd{(PAIRED)} keyword
3115 is also given, then the number of variables preceding @subcmd{WITH}
3116 must be the same as the number following it.
3117 In this case, tables for each respective pair of variables are
3119 In the event that the @subcmd{WITH} keyword is given, but the
3120 @subcmd{(PAIRED)} keyword is omitted, then tables for each combination
3121 of variable preceding @subcmd{WITH} against variable following
3122 @subcmd{WITH} are generated.
3129 @cindex analysis of variance
3134 [/VARIABLES = ] @var{var_list} BY @var{var}
3135 /MISSING=@{ANALYSIS,LISTWISE@} @{EXCLUDE,INCLUDE@}
3136 /CONTRAST= @var{value1} [, @var{value2}] ... [,@var{valueN}]
3137 /STATISTICS=@{DESCRIPTIVES,HOMOGENEITY@}
3138 /POSTHOC=@{BONFERRONI, GH, LSD, SCHEFFE, SIDAK, TUKEY, ALPHA ([@var{value}])@}
3141 The @cmd{ONEWAY} procedure performs a one-way analysis of variance of
3142 variables factored by a single independent variable.
3143 It is used to compare the means of a population
3144 divided into more than two groups.
3146 The dependent variables to be analysed should be given in the @subcmd{VARIABLES}
3148 The list of variables must be followed by the @subcmd{BY} keyword and
3149 the name of the independent (or factor) variable.
3151 You can use the @subcmd{STATISTICS} subcommand to tell @pspp{} to display
3152 ancillary information. The options accepted are:
3155 Displays descriptive statistics about the groups factored by the independent
3158 Displays the Levene test of Homogeneity of Variance for the
3159 variables and their groups.
3162 The @subcmd{CONTRAST} subcommand is used when you anticipate certain
3163 differences between the groups.
3164 The subcommand must be followed by a list of numerals which are the
3165 coefficients of the groups to be tested.
3166 The number of coefficients must correspond to the number of distinct
3167 groups (or values of the independent variable).
3168 If the total sum of the coefficients are not zero, then @pspp{} will
3169 display a warning, but will proceed with the analysis.
3170 The @subcmd{CONTRAST} subcommand may be given up to 10 times in order
3171 to specify different contrast tests.
3172 The @subcmd{MISSING} subcommand defines how missing values are handled.
3173 If @subcmd{LISTWISE} is specified then cases which have missing values for
3174 the independent variable or any dependent variable are ignored.
3175 If @subcmd{ANALYSIS} is specified, then cases are ignored if the independent
3176 variable is missing or if the dependent variable currently being
3177 analysed is missing. The default is @subcmd{ANALYSIS}.
3178 A setting of @subcmd{EXCLUDE} means that variables whose values are
3179 user-missing are to be excluded from the analysis. A setting of
3180 @subcmd{INCLUDE} means they are to be included. The default is @subcmd{EXCLUDE}.
3182 Using the @code{POSTHOC} subcommand you can perform multiple
3183 pairwise comparisons on the data. The following comparison methods
3187 Least Significant Difference.
3188 @item @subcmd{TUKEY}
3189 Tukey Honestly Significant Difference.
3190 @item @subcmd{BONFERRONI}
3192 @item @subcmd{SCHEFFE}
3194 @item @subcmd{SIDAK}
3197 The Games-Howell test.
3201 Use the optional syntax @code{ALPHA(@var{value})} to indicate that
3202 @cmd{ONEWAY} should perform the posthoc tests at a confidence level of
3203 @var{value}. If @code{ALPHA(@var{value})} is not specified, then the
3204 confidence level used is 0.05.
3207 @section QUICK CLUSTER
3208 @vindex QUICK CLUSTER
3210 @cindex K-means clustering
3214 QUICK CLUSTER @var{var_list}
3215 [/CRITERIA=CLUSTERS(@var{k}) [MXITER(@var{max_iter})] CONVERGE(@var{epsilon}) [NOINITIAL]]
3216 [/MISSING=@{EXCLUDE,INCLUDE@} @{LISTWISE, PAIRWISE@}]
3217 [/PRINT=@{INITIAL@} @{CLUSTER@}]
3218 [/SAVE[=[CLUSTER[(@var{membership_var})]] [DISTANCE[(@var{distance_var})]]]
3221 The @cmd{QUICK CLUSTER} command performs k-means clustering on the
3222 dataset. This is useful when you wish to allocate cases into clusters
3223 of similar values and you already know the number of clusters.
3225 The minimum specification is @samp{QUICK CLUSTER} followed by the names
3226 of the variables which contain the cluster data. Normally you will also
3227 want to specify @subcmd{/CRITERIA=CLUSTERS(@var{k})} where @var{k} is the
3228 number of clusters. If this is not specified, then @var{k} defaults to 2.
3230 If you use @subcmd{/CRITERIA=NOINITIAL} then a naive algorithm to select
3231 the initial clusters is used. This will provide for faster execution but
3232 less well separated initial clusters and hence possibly an inferior final
3236 @cmd{QUICK CLUSTER} uses an iterative algorithm to select the clusters centers.
3237 The subcommand @subcmd{/CRITERIA=MXITER(@var{max_iter})} sets the maximum number of iterations.
3238 During classification, @pspp{} will continue iterating until until @var{max_iter}
3239 iterations have been done or the convergence criterion (see below) is fulfilled.
3240 The default value of @var{max_iter} is 2.
3242 If however, you specify @subcmd{/CRITERIA=NOUPDATE} then after selecting the initial centers,
3243 no further update to the cluster centers is done. In this case, @var{max_iter}, if specified.
3246 The subcommand @subcmd{/CRITERIA=CONVERGE(@var{epsilon})} is used
3247 to set the convergence criterion. The value of convergence criterion is @var{epsilon}
3248 times the minimum distance between the @emph{initial} cluster centers. Iteration stops when
3249 the mean cluster distance between one iteration and the next
3250 is less than the convergence criterion. The default value of @var{epsilon} is zero.
3252 The @subcmd{MISSING} subcommand determines the handling of missing variables.
3253 If @subcmd{INCLUDE} is set, then user-missing values are considered at their face
3254 value and not as missing values.
3255 If @subcmd{EXCLUDE} is set, which is the default, user-missing
3256 values are excluded as well as system-missing values.
3258 If @subcmd{LISTWISE} is set, then the entire case is excluded from the analysis
3259 whenever any of the clustering variables contains a missing value.
3260 If @subcmd{PAIRWISE} is set, then a case is considered missing only if all the
3261 clustering variables contain missing values. Otherwise it is clustered
3262 on the basis of the non-missing values.
3263 The default is @subcmd{LISTWISE}.
3265 The @subcmd{PRINT} subcommand requests additional output to be printed.
3266 If @subcmd{INITIAL} is set, then the initial cluster memberships will
3268 If @subcmd{CLUSTER} is set, the cluster memberships of the individual
3269 cases are displayed (potentially generating lengthy output).
3271 You can specify the subcommand @subcmd{SAVE} to ask that each case's cluster membership
3272 and the euclidean distance between the case and its cluster center be saved to
3273 a new variable in the active dataset. To save the cluster membership use the
3274 @subcmd{CLUSTER} keyword and to save the distance use the @subcmd{DISTANCE} keyword.
3275 Each keyword may optionally be followed by a variable name in parentheses to specify
3276 the new variable which is to contain the saved parameter. If no variable name is specified,
3277 then PSPP will create one.
3285 [VARIABLES=] @var{var_list} [@{A,D@}] [BY @var{var_list}]
3286 /TIES=@{MEAN,LOW,HIGH,CONDENSE@}
3287 /FRACTION=@{BLOM,TUKEY,VW,RANKIT@}
3289 /MISSING=@{EXCLUDE,INCLUDE@}
3291 /RANK [INTO @var{var_list}]
3292 /NTILES(k) [INTO @var{var_list}]
3293 /NORMAL [INTO @var{var_list}]
3294 /PERCENT [INTO @var{var_list}]
3295 /RFRACTION [INTO @var{var_list}]
3296 /PROPORTION [INTO @var{var_list}]
3297 /N [INTO @var{var_list}]
3298 /SAVAGE [INTO @var{var_list}]
3301 The @cmd{RANK} command ranks variables and stores the results into new
3304 The @subcmd{VARIABLES} subcommand, which is mandatory, specifies one or
3305 more variables whose values are to be ranked.
3306 After each variable, @samp{A} or @samp{D} may appear, indicating that
3307 the variable is to be ranked in ascending or descending order.
3308 Ascending is the default.
3309 If a @subcmd{BY} keyword appears, it should be followed by a list of variables
3310 which are to serve as group variables.
3311 In this case, the cases are gathered into groups, and ranks calculated
3314 The @subcmd{TIES} subcommand specifies how tied values are to be treated. The
3315 default is to take the mean value of all the tied cases.
3317 The @subcmd{FRACTION} subcommand specifies how proportional ranks are to be
3318 calculated. This only has any effect if @subcmd{NORMAL} or @subcmd{PROPORTIONAL} rank
3319 functions are requested.
3321 The @subcmd{PRINT} subcommand may be used to specify that a summary of the rank
3322 variables created should appear in the output.
3324 The function subcommands are @subcmd{RANK}, @subcmd{NTILES}, @subcmd{NORMAL}, @subcmd{PERCENT}, @subcmd{RFRACTION},
3325 @subcmd{PROPORTION} and @subcmd{SAVAGE}. Any number of function subcommands may appear.
3326 If none are given, then the default is RANK.
3327 The @subcmd{NTILES} subcommand must take an integer specifying the number of
3328 partitions into which values should be ranked.
3329 Each subcommand may be followed by the @subcmd{INTO} keyword and a list of
3330 variables which are the variables to be created and receive the rank
3331 scores. There may be as many variables specified as there are
3332 variables named on the @subcmd{VARIABLES} subcommand. If fewer are specified,
3333 then the variable names are automatically created.
3335 The @subcmd{MISSING} subcommand determines how user missing values are to be
3336 treated. A setting of @subcmd{EXCLUDE} means that variables whose values are
3337 user-missing are to be excluded from the rank scores. A setting of
3338 @subcmd{INCLUDE} means they are to be included. The default is @subcmd{EXCLUDE}.
3340 @include regression.texi
3344 @section RELIABILITY
3349 /VARIABLES=@var{var_list}
3350 /SCALE (@var{name}) = @{@var{var_list}, ALL@}
3351 /MODEL=@{ALPHA, SPLIT[(@var{n})]@}
3352 /SUMMARY=@{TOTAL,ALL@}
3353 /MISSING=@{EXCLUDE,INCLUDE@}
3356 @cindex Cronbach's Alpha
3357 The @cmd{RELIABILITY} command performs reliability analysis on the data.
3359 The @subcmd{VARIABLES} subcommand is required. It determines the set of variables
3360 upon which analysis is to be performed.
3362 The @subcmd{SCALE} subcommand determines the variables for which
3363 reliability is to be calculated. If @subcmd{SCALE} is omitted, then analysis for
3364 all variables named in the @subcmd{VARIABLES} subcommand are used.
3365 Optionally, the @var{name} parameter may be specified to set a string name
3368 The @subcmd{MODEL} subcommand determines the type of analysis. If @subcmd{ALPHA} is specified,
3369 then Cronbach's Alpha is calculated for the scale. If the model is @subcmd{SPLIT},
3370 then the variables are divided into 2 subsets. An optional parameter
3371 @var{n} may be given, to specify how many variables to be in the first subset.
3372 If @var{n} is omitted, then it defaults to one half of the variables in the
3373 scale, or one half minus one if there are an odd number of variables.
3374 The default model is @subcmd{ALPHA}.
3376 By default, any cases with user missing, or system missing values for
3377 any variables given in the @subcmd{VARIABLES} subcommand are omitted
3378 from the analysis. The @subcmd{MISSING} subcommand determines whether
3379 user missing values are included or excluded in the analysis.
3381 The @subcmd{SUMMARY} subcommand determines the type of summary analysis to be performed.
3382 Currently there is only one type: @subcmd{SUMMARY=TOTAL}, which displays per-item
3383 analysis tested against the totals.
3385 @subsection Example - Reliability
3387 Before analysing the results of a survey -- particularly for a multiple choice survey --
3388 it is desireable to know whether the respondents have considered their answers
3389 or simply provided random answers.
3391 In the following example the survey results from the file @file{hotel.sav} are used.
3392 All five survey questions are included in the reliability analysis.
3393 However, before running the analysis, the data must be preprocessed.
3394 An examination of the survey questions reveals that two questions, @i{viz:} v3 and v5
3395 are negatively worded, whereas the others are positively worded.
3396 All questions must be based upon the same scale for the analysis to be meaningful.
3397 One could use the @cmd{RECODE} command (@pxref{RECODE}), however a simpler way is
3398 to use @cmd{COMPUTE} (@pxref{COMPUTE}) and this is what is done in @ref{reliability:ex}.
3400 @float Example, reliability:ex
3401 @psppsyntax {reliability.sps}
3402 @caption {Investigating the reliability of survey responses}
3405 In this case, all variables in the data set are used. So we can use the special
3406 keyword @samp{ALL} (@pxref{BNF}).
3408 @float Screenshot, reliability:src
3409 @psppimage {reliability}
3410 @caption {Reliability dialog box with all variables selected}
3413 @ref{reliability:res} shows that Cronbach's Alpha is 0.11 which is a value normally considered too
3414 low to indicate consistency within the data. This is possibly due to the small number of
3415 survey questions. The survey should be redesigned before serious use of the results are
3418 @float Result, reliability:res
3419 @psppoutput {reliability}
3420 @caption {The results of the reliability command on @file{hotel.sav}}
3428 @cindex Receiver Operating Characteristic
3429 @cindex Area under curve
3432 ROC @var{var_list} BY @var{state_var} (@var{state_value})
3433 /PLOT = @{ CURVE [(REFERENCE)], NONE @}
3434 /PRINT = [ SE ] [ COORDINATES ]
3435 /CRITERIA = [ CUTOFF(@{INCLUDE,EXCLUDE@}) ]
3436 [ TESTPOS (@{LARGE,SMALL@}) ]
3437 [ CI (@var{confidence}) ]
3438 [ DISTRIBUTION (@{FREE, NEGEXPO @}) ]
3439 /MISSING=@{EXCLUDE,INCLUDE@}
3443 The @cmd{ROC} command is used to plot the receiver operating characteristic curve
3444 of a dataset, and to estimate the area under the curve.
3445 This is useful for analysing the efficacy of a variable as a predictor of a state of nature.
3447 The mandatory @var{var_list} is the list of predictor variables.
3448 The variable @var{state_var} is the variable whose values represent the actual states,
3449 and @var{state_value} is the value of this variable which represents the positive state.
3451 The optional subcommand @subcmd{PLOT} is used to determine if and how the @subcmd{ROC} curve is drawn.
3452 The keyword @subcmd{CURVE} means that the @subcmd{ROC} curve should be drawn, and the optional keyword @subcmd{REFERENCE},
3453 which should be enclosed in parentheses, says that the diagonal reference line should be drawn.
3454 If the keyword @subcmd{NONE} is given, then no @subcmd{ROC} curve is drawn.
3455 By default, the curve is drawn with no reference line.
3457 The optional subcommand @subcmd{PRINT} determines which additional
3458 tables should be printed. Two additional tables are available. The
3459 @subcmd{SE} keyword says that standard error of the area under the
3460 curve should be printed as well as the area itself. In addition, a
3461 p-value for the null hypothesis that the area under the curve equals
3462 0.5 is printed. The @subcmd{COORDINATES} keyword says that a
3463 table of coordinates of the @subcmd{ROC} curve should be printed.
3465 The @subcmd{CRITERIA} subcommand has four optional parameters:
3467 @item The @subcmd{TESTPOS} parameter may be @subcmd{LARGE} or @subcmd{SMALL}.
3468 @subcmd{LARGE} is the default, and says that larger values in the predictor variables are to be
3469 considered positive. @subcmd{SMALL} indicates that smaller values should be considered positive.
3471 @item The @subcmd{CI} parameter specifies the confidence interval that should be printed.
3472 It has no effect if the @subcmd{SE} keyword in the @subcmd{PRINT} subcommand has not been given.
3474 @item The @subcmd{DISTRIBUTION} parameter determines the method to be used when estimating the area
3476 There are two possibilities, @i{viz}: @subcmd{FREE} and @subcmd{NEGEXPO}.
3477 The @subcmd{FREE} method uses a non-parametric estimate, and the @subcmd{NEGEXPO} method a bi-negative
3478 exponential distribution estimate.
3479 The @subcmd{NEGEXPO} method should only be used when the number of positive actual states is
3480 equal to the number of negative actual states.
3481 The default is @subcmd{FREE}.
3483 @item The @subcmd{CUTOFF} parameter is for compatibility and is ignored.
3486 The @subcmd{MISSING} subcommand determines whether user missing values are to
3487 be included or excluded in the analysis. The default behaviour is to
3489 Cases are excluded on a listwise basis; if any of the variables in @var{var_list}
3490 or if the variable @var{state_var} is missing, then the entire case is
3493 @c LocalWords: subcmd subcommand