Quick Cluster: Reimplement clustering algorithm
[pspp] / NEWS
1 PSPP NEWS -- history of user-visible changes.
2 Copyright (C) 1996-2000, 2008-2015 Free Software Foundation, Inc.
3 See the end for copying conditions.
4
5 Please send PSPP bug reports to bug-gnu-pspp@gnu.org.
6  
7 Changes from 0.8.5 to 0.9.0:
8
9  * The QUICK CLUSTER command has a  /PRINT subcommand which shows
10    the initial cluster centres and the final cluster membership of
11    each case.  The clustering algorithm has also been updated, so
12    as to produce better separated clusters.
13
14  * A Russian localisation has been contributed.
15
16  * The graphical user interface uses Gtk+ version 3 instead of version 2.
17    Accordingly, it has a somewhat different look and feel.
18
19  * The pspp-convert utility can now decrypt encrypted syntax files.
20    The encrypted syntax file format is unacceptably insecure, so to
21    discourage its use PSPP and PSPPIRE do not directly read or write
22    this format.
23
24  * Bug fixes, including the following notable ones:
25
26    - The correlation coefficient in the paired samples t-test
27      procedure is now correctly calculated when presented with
28      weighted data.
29
30    - The ESCAPE subcommand has been removed from GET DATA /TYPE=TXT.
31      For compatibility, the behavior that ESCAPE enabled is now the
32      default and only supported behavior.
33
34 Changes from 0.8.4 to 0.8.5:
35
36  * The FREQUENCIES and CROSSTABS commands can now generate barcharts.
37
38  * The FACTOR command can now perform PROMAX rotations.
39
40  * SPSS/PC+ system files are now supported on GET and other commands
41    that read SPSS system files.  The pspp-convert program can now read
42    SPSS/PC+ system files.  Writing the obsolete SPSS/PC+ system file
43    format is not supported.
44
45  * SYSFILE INFO can now read SPSS/PC+ system files and SPSS portable
46    files.
47
48  * FREQUENCIES: A bug was fixed where an assertion failure occured
49    when an empty dataset was presented.
50
51  * The GRAPH command is now available.  Initially it supports
52    scatterplots and histograms.
53
54  * The RND operator in expressions now supports additional operands
55    for rounding to values other than integers and to indicate a level
56    of rounding fuzz.  The default rounding fuzz may now be controlled
57    and displayed with SET FUZZBITS and SHOW FUZZBITS, respectively.
58
59 Changes from 0.8.3 to 0.8.4:
60
61  * Formatting of SYSFILE INFO output was made easier to read.
62
63  * Bug fixes, including the following notable ones:
64
65    - FREQUENCIES works properly for string variables.  (This bug was
66      introduced in 0.8.2.)
67
68    - CROSSTABS now correctly computes all of the measures that it
69      offers.  Some measures have been removed because they were not
70      computed correctly.
71
72    - The NPAR TESTS calculation of significance for the RUNS
73      subcommand has been corrected.
74
75    - Planned comparisons in ONEWAY ANOVA now correctly handle negative
76      T-values.
77
78    - The COUNT command now correctly treats missing values as
79      documented.
80
81    - Conformance fixes to Open Document output format.
82
83 Changes from 0.8.2 to 0.8.3:
84
85  * Independent T-Tests displayed the standard error of the difference
86    and the confidence interval for the unequal variances case, where
87    the equal variances case should have been.  This has been fixed.
88
89  * REGRESSION now recognises /STATISTICS=CI(x) which causes confidence
90    intervals for the coefficients to be printed.
91
92  * When DESCRIPTIVES calculates Z scores, it now omits cases filtered
93    by the current FILTER settings.
94
95  * PSPPIRE graphical user interface improvements:
96
97    - Dialog boxes with source  variable lists can now choose the sort
98      order;  right click and select from the popup menu.
99
100    - File|Open now allows an encoding to be selected for opening
101      system files.
102
103    - File|Display Data File Information|External File... now allows an
104      encoding to be selected.
105
106    - A problem with the Means dialog has been resolved (bug #41433).
107
108    - Several problems related to the input of spreadsheets have been
109      fixed (bug #41657, #41620
110
111  * System file related improvements:
112
113    - With ENCODING="DETECT", SYSFILE INFO can now help the user to
114      pick an encoding for reading a system file that does not identify
115      its own encoding
116
117    - SYSFILE INFO now accepts an ENCODING subcommand to specify the
118      character encoding of string data in the system file.
119
120    - Variable labels over 255 bytes long are now accepted without
121      truncation (bug #41863).
122
123    - System files that contain duplicate variable names may now be
124      read successfully (bug #41475).
125
126 Changes from 0.8.1 to 0.8.2:
127
128  * Charts are now rendered with colours from the Tango palette instead
129    of fully saturated primaries.
130
131  * Support for new system file variants:
132
133    - PSPP can now read and write ZCOMPRESSED system files, which
134      compress data much more effectively than older "compressed"
135      files.  (The older format is still supported.)
136
137    - PSPP can now decrypt encrypted system files, using the new
138      pspp-convert utility.  The encrypted system file format is
139      unacceptably insecure, so to discourage its use PSPP and PSPPIRE
140      do not directly read or write this format.
141
142  * Missing values for long string variables are now read from and
143    written to system files in an SPSS-compatible fashion.
144
145    (Earlier versions of PSPP that supported missing values for long
146    string variables wrote them to system files in an SPSS-incompatible
147    way.  To fix the problem, read the system file with this version of
148    PSPP and then save a new copy of it.)
149
150  * pspp-convert, a new standalone utility for converting SPSS system
151    and portable files to other formats, is now included.  The initial
152    version supports comma-separated value files as output format.
153    pspp-convert can also decrypt encrypted system files.
154
155  * Build changes:
156
157    - zlib is now a required dependency.  (Previously it was optional.)
158
159 Changes from 0.8.0 to 0.8.1:
160
161  * New commands:
162
163    - VARIABLE ROLE.
164
165  * Changes to existing commands:
166
167    - CROSSTABS: The requirement that one expected count must be less than five
168         before Fishers Exact Test will be reported has been removed.
169
170  * PSPPIRE graphical user interface improvements:
171
172    - A new set of icons has been contributed.
173
174    - Syntax windows now parse syntax in "auto" mode, which in practice
175      should mean that both "batch" and "interactive" syntax now works,
176      instead of just "interactive" syntax.
177
178    - The variable pane of data windows now include a Role column.
179
180  * Notable bug fixes:
181
182    - System files written by IBM SPSS 21 are now read without warnings.
183
184    - System files written by "VOXCO INTERVIEWER 4.3" are now read
185      without warnings.
186
187    - PSPPIRE should now more gracefully handle syntax files that contain
188      errors.
189
190 Changes from 0.6.2 to 0.8.0:
191
192  * New commands:
193
194    - ADD FILES
195    - CORRELATIONS
196    - DATAFILE ATTRIBUTES
197    - DATASET ACTIVATE
198    - DATASET CLOSE
199    - DATASET COPY
200    - DATASET DECLARE
201    - DATASET DISPLAY
202    - DATASET NAME
203    - LOGISTIC REGRESSION
204    - MATCH FILES
205    - MEANS
206    - MRSETS
207    - PRESERVE and RESTORE
208    - QUICK CLUSTER
209    - RELIABILITY
210    - ROC
211    - SAVE TRANSLATE to CSV and tab-delimited files
212    - UPDATE
213    - VARIABLE ATTRIBUTES
214
215  * Changes to existing commands:
216
217    - AUTORECODE has a new GROUP subcommand.
218
219    - CROSSTABS has been re-implemented to fix numerous bugs.
220
221    - EXAMINE: /MISSING=LISTWISE is now the default.
222
223    - DO REPEAT command has been reimplemented.  Now, when DO REPEAT
224      contains an INCLUDE or INSERT command, substitutions are not
225      applied to the included file.
226   
227    - FILE HANDLE has a new ENDS subcommand to select CR or CRLF new-lines.
228
229    - HOST has been updated to use more modern syntax.
230
231    - Most commands that work with data files now support a new
232      ENCODING subcommand.
233
234    - MISSING VALUES can now assign missing values to long string
235      variables.
236
237    - ONEWAY: the POSTHOC subcommand is now implemented.
238
239    - The following new subcommands to NPAR TESTS have been implemented:
240      COCHRAN, FRIEDMAN, JONCKHEERE-TERPSTRA, KENDALL, KRUSKAL-WALLIS, MANN-WHITNEY, 
241      MCNEMAR, SIGN, WILCOXON, and RUNS
242
243    - SET and SHOW no longer have ENDCMD, NULLINE, PROMPT, CPROMPT, and
244      DPROMPT subcommands.  The defaults are now fixed values.
245
246    - SHOW now has a JOURNAL subcommand, to show the location of the
247      journal file.
248
249    - VALUE LABELS can now assign value labels to long string
250      variables.
251
252  * Other language changes:
253
254    - The new DATASET commands replace the "scratch file" PSPP
255      extension, which is no longer supported.
256
257    - Strings may now include arbitrary Unicode code points specified
258      in hexadecimal, using the syntax U'hhhh'.  For example, Unicode
259      code point U+1D11E, the musical G clef character, may be
260      expressed as U'1D11E'.
261
262      See the "Tokens" section in the PSPP manual for more information.
263
264    - In previous versions of PSPP, in a string expressed in
265      hexadecimal with X'hh' syntax, the hexadecimal digits expressed
266      bytes in the locale encoding.  In this version of PSPP, X'hh'
267      syntax always expresses bytes in UTF-8 encoding.
268
269      See the "Tokens" section in the PSPP manual for more information.
270
271  * PSPPIRE graphical user interface improvements:
272
273    - Added support for non-ASCII characters in strings, labels and
274      variable names.
275
276    - A "Split Window" function is available, which makes it easier to
277      see different parts of a large data file.
278
279    - Data files can now be opened by specifing their name as the first
280      argument.  This means that on a properly configured desktop, double
281      clicking on an icon will open the file.
282
283    - Foreign formats, such as Gnumeric, OpenDocument and CSV can be imported
284      via using an "intelligent" application assistant dialog.
285
286  * Output changes:
287
288    - The new "cairo" output driver supports output in PostScript, PDF,
289      and SVG formats.  Its functionality is a superset of that of the
290      "postscript" driver, which has been removed.  You must have Cairo
291      and Pango installed to build the "cairo" driver.
292
293    - Charts are now produced with Cairo and Pango, instead of libplot.
294      Without them, the new graphing features will not work.  If you do
295      not have Cairo and Pango installed, you must run `configure' with
296      --without-cairo.
297
298    - The plain text output driver now properly supports multibyte UTF-8
299      characters, including double-width characters and combining
300      accents.
301
302    - Output to OpenDocument format is now supported.
303
304    - The HTML output is much improved.
305
306  * The "pspp" program has a new option --batch (or -b) that selects
307    "batch" syntax mode.  In previous versions of PSPP this syntax mode
308    was the default.  Now a new "auto" syntax mode is the default.  In
309    "auto" mode, PSPP interprets most syntax files correctly regardless
310    of their intended syntax mode.
311
312    See the "Syntax Variants" section in the PSPP manual for more
313    information.
314
315  * The "pspp" program has a new option --syntax-encoding that
316    specifies the encoding for syntax files listed on the command line,
317    as well as the default encoding for syntax files included with
318    INCLUDE or INSERT.  The default is to accept the system locale
319    encoding, UTF-8, UTF-16, or UTF-32, automatically detecting which
320    one the system file uses.
321
322    See the documentation for the INSERT command in the PSPP manual for
323    more information.
324
325  * Text data files that PRINT and WRITE creates now use the system
326    native line ends by default (CRLF on Windows, LF only elsewhere).
327    Use the new ENDS subcommand on FILE HANDLE to override the default.
328
329  * A new Perl module allows Perl programs to read and write PSPP
330    system files.
331
332  * A tutorial chapter has been added to the user manual.
333 \f
334 Changes from 0.6.1 to 0.6.2:
335
336   * New translations:
337
338     - Dutch, thanks to Harry Thijssen.
339
340     - Brazilian Portuguese, thanks to Michel Boaventura.
341
342     Thanks for translations are also due to the coordinators at
343     translationproject.org.
344
345   * Statistical bug fixes:
346
347     - REGRESSION: Report correct standard error of the estimate (bug
348       #25677).
349
350     - T-TEST: Report correct significance of paired sample T-test in
351       the common case (bug #26936) and corner cases.  Thanks to Mike
352       Griffiths and Matej Cepl for reporting these bugs.
353
354   * Build fixes and changes:
355
356     - Fix build with GTK+ 2.17.4 and later.
357
358     - Make running "make" after running "configure" with different
359       settings reliably rebuild version.c.
360
361     - Cygwin and MinGW build fixes.
362
363     - Fixes for building with recent gnulib.
364
365     - The Makefile now honors two new variables, PSPP_LDFLAGS and
366       PSPPIRE_LDFLAGS, that affect linking of the PSPP and PSPPIRE
367       binaries, respectively.  This makes building easier for some
368       packagers.
369
370     - Fixes for "configure --enable-relocatable" (bug #25508).
371
372   * Data file bug fixes and changes:
373
374     - Fix reading text data files that contain a mix of white space
375       and commas.  Now "a ,b" is treated as two fields containing "a"
376       and "b"; previously it was treated as three, with an empty field
377       in the middle.
378
379     - Fix writing corrupted .sav files on Windows.
380
381     - Fix writing variable labels longer than 252 bytes to save files.
382       Thanks to Robert Westlund for reporting this bug.
383
384     - Fix writing corrupted .por files (bug #26034).
385
386     - Fix reading .por files whose initial lines are not padded out
387       with spaces as expected.
388
389     - PSPP will no longer issue warnings about some .sav file records
390       or values that it does not understand.  These warnings were
391       harmless, but needlessly alarmed some users.
392
393     - Fix crash reading empty string fields from PostgreSQL databases.
394
395   * Bug fixes that affect PSPP and PSPPIRE:
396
397     - Users may now control precision of output statistics.  Instead
398       of hard coding the width and decimals of output numbers, respect
399       the default format in most instances.  Counts are now normally
400       displayed with the format of the weight variable, if any.
401
402     - Fix crash when an INSERT command specifies the name of a file
403       that does not exist (bug #24569).
404
405     - Fix crash when CROSSTABS specifies a long-string variable (bugs
406       #24557 and #26131).
407
408     - Fix crash drawing pie charts with many segments.
409
410     - Fix crash when NUMERIC specifies an invalid format.
411
412   * PSPPIRE bug fixes and changes:
413
414     - On Windows, write the output file to the user's home directory
415       instead of the current directory, to better match user
416       expectations.
417
418     - Some data editor fixes.
419
420   * Documentation:
421
422     - Fix typo in BINOMIAL section of user manual (bug #25892).
423
424 Changes from 0.6.0 to 0.6.1:
425
426   * Statistical bug fixes:
427
428     - Report correct standardized regression coefficients in linear
429       regression output (bug #23567).
430
431   * Bug fixes that affect PSPP and PSPPIRE:
432
433     - Avoid crash with pie charts (bug #24014).
434
435     - Don't append % to count totals (bug #24003).
436
437     - Don't crash on bad input (bug #24031).
438
439     - Don't crash if "end data." is not left aligned (bug #24115).
440
441     - Change default workspace value to 64 MB, to avoid unnecessary
442       disk accesses on modern machines.
443
444   * PSPPIRE bug fixes:
445
446     - Add ".sav" or ".por" suffix to filename when saving with Save_As
447       (bug #23137).
448
449     - Make it possible to reopen the output window on Windows (bug
450       #24033).
451
452     - A POSIX regular expression library is now included and used
453       automatically if the host does not have one or has one that is
454       inadequate.
455
456   * Build fixes and changes:
457
458     - Work around bug in GSL that prevented build with recent GCC
459       versions without manually adding -fgnu89-inline to CFLAGS.
460
461     - Also warn about missing prerequisites as we encounter them (bug
462       #24445).
463
464     - Distribute necessary files to allow users working from the
465       distributed tarball to configure with --enable-gui-tools.
466
467     - Append $(EXEEXT_FOR_BUILD) to output file name when building
468       q2c, fixing build problems on Windows.
469
470     - GSL 1.8 or later is now required.
471
472     - Build errors with --enable-relocatable were fixed.
473
474   * The German translations were removed, since native German speakers
475     found them too poor to be useful.
476
477 Changes from 0.4.0 to 0.6.0:
478
479   * The PSPP license is now version 3 or later of the GNU General
480     Public License.  Previously, it was version 2 or later.
481
482   * PSPP now has a graphical interface, called PSPPIRE.  This
483     interface allows you to enter data and variable definitions
484     interactively.  Commands may be executed in syntax form, or by
485     using the interactive dialog boxes available from the dropdown
486     menus.
487
488   * A few sample syntax files are now included in the `examples'
489     directory.
490
491   * Numerous major and minor bugs have been fixed.
492
493   Build changes:
494
495     * The INSTALL file now reflects the details of how to install
496       PSPP.  It is a tailored version of the generic installation
497       instructions, instead of a verbatim copy.
498
499     * iconv, which is ordinarily installed as part of a Unix-like
500       system, is now required.  If you don't have it already, you can
501       install GNU libiconv (http://www.gnu.org/software/libiconv/).
502
503     * libxml2 and zlib are new optional dependencies.  They are
504       required to use PSPP's support for reading Gnumeric files.
505
506   Statistical procedure changes:
507
508     * REGRESSION is a new procedure for fitting linear models to data
509       via least-squares estimation.
510
511     * NPAR TESTS is a new procedure for non-parametric tests.  In this
512       release, it supports binomial and chi-square tests.
513
514     * RANK is a new procedure to rank variables.  It supports numerous
515       forms of ranking.
516
517     * FREQUENCIES can now output histograms and pie charts.  These
518       features were present in earlier releases, but not documented.
519
520   User interface changes:
521
522     * In many situations where PSPP once terminated with a fatal
523       error, PSPP now recovers and continues execution.
524
525     * PSPP is now able to start up and run even if it cannot find its
526       configuration files.
527
528     * Journaling of interactive commands to a disk file is now
529       implemented.  By default, journaling is enabled, to a file named
530       `pspp.jnl' in the current directory.  SET JOURNAL may be used to
531       control journaling.
532
533     * The use of `+' between syntax file names on the command line to
534       prevent the dictionary from being cleared between their
535       executions is no longer supported.  All syntax files are now
536       executed as if `+' had been specified.
537
538     * The -d/--define and -u/--undef command line options are no
539       longer supported.  Instead, use /usr/bin/env or shell primitives
540       to define or clear environment variables before invoking PSPP.
541
542     * If a syntax file named named `rc' is found in a configuration
543       directory (such as $HOME/.pspp), it is executed before any
544       syntax file specified on the command line.  The -r or
545       --no-statrc command line option may be used to disable this
546       behavior.
547
548   Output changes:
549
550     * Output configuration options have changed.  Please refer to the
551       manual for a full description of the available options.
552
553       In consequence, you will need to reinstall your "devices" file.
554       "make install" will do this for you.
555
556     * Most error messages are now written to PSPP output files by
557       default.  SET ERROR can be used to disable this behavior.
558
559     * When invoked interactively, PSPP now by default produces output
560       on the terminal, piping it through the "more" program.
561       Previously, by default output was written only to file
562       pspp.list.  On most terminals, the page length used for output
563       automatically adapts to the terminal size, even if the terminal
564       is resized.
565
566     * ASCII driver:
567
568       - This driver now supports charts in output.  Charts are written
569         as separate files that the main output file refers to.  By
570         default, charts are written in PNG format to files named
571         pspp-1.png, pspp-2.png, and so on.
572
573       - Configurations are provided that use VT100 (and xterm)
574         line-drawing characters in tables.  The option "-o list-vt100"
575         requests use of this device for output to pspp.list.
576
577     * PostScript driver:
578
579       - The default paper size is now determined using the PAPERSIZE
580         environment variable, or the LC_PAPER locale category on
581         systems that support it.  If these are not set, the default is
582         now A4, instead of US letter.  To make US letter the default,
583         set PAPERSIZE to "letter" in your environment.
584
585       - Font metrics are now read from AFM files, instead of
586         Groff-format metrics files.  PostScript fonts can now be
587         embedded in output.
588
589         In consequence, you will need to install an AFM file for each
590         font used in PostScript output.  "make install" will install
591         AFM files for the standard PostScript fonts, including the
592         ones that the PostScript driver uses by default.
593
594       - Standard paper sizes no longer need to be specified through a
595         configuration file.  The "papersize" configuration file is no
596         longer needed, or supported.
597
598       - The PostScript prologue is no longer obtained from the
599         "ps-prologue" configuration file.  This configuration file is
600         no longer needed, or supported.
601
602     * HTML driver:
603
604       - The HTML prologue is no longer obtained from the
605         "html-prologue" configuration file.  This configuration file
606         is no longer needed, or supported.
607
608   Command language changes:
609
610     * The following commands are new:
611
612       - GET DATA, which currently supports reading Gnumeric files and
613         text data files.  It will be extended later to read other
614         types of foreign data.
615
616       - CD, to change the current directory.
617
618       - INSERT, to execute a syntax file.
619
620       - DELETE VARIABLES, to remove variables from the active file
621         dictionary.
622
623       - ADD DOCUMENT, to add text to active file documents.
624
625       - CLOSE FILE HANDLE (a PSPP extension; see below).
626
627       - XEXPORT, a PSPP extension that is a transformation equivalent
628         to EXPORT.
629
630     * The following functions for transformation expressions are new:
631
632       - DATEDIFF, for computing the difference of two dates.
633
634       - DATESUM, for advancing a date by a specified duration.
635
636       - VALUELABEL, to obtain the value label for a value.
637
638     * PSPP now supports very long string variables (over 255 bytes
639       long).
640
641     * MATCH FILES now supports the FIRST and LAST subcommands.
642
643     * Previous versions of PSPP prohibited using commands to both read and
644       write a single file at the same time.  Now, PSPP allows this, and
645       the new version of the file atomically replaces the old version.
646
647     * The following commands are no longer available.  They will be
648       re-implemented in a later release:
649
650       - CLEAR TRANSFORMATIONS
651
652       - MATRIX DATA
653
654       - REPEATING DATA
655
656     * The PROCESS IF command, which was deprecated, has been removed.
657       You may replace any usage of it by SELECT IF following
658       TEMPORARY, which has the same effect.
659
660     * The output format for variables created by VECTOR may now be
661       specified as part of the VECTOR syntax.
662
663   "Scratch files", a new PSPP extension:
664
665     A scratch file, like a system file, consists of a dictionary and
666     any number of cases.  Small scratch files are stored in memory;
667     one that grows too large is written to disk.  By default, any file
668     handle whose name begins with # is assumed to refer to a scratch
669     file.
670
671     Scratch files can be used just about anywhere a system or portable
672     file can be used.  Also, portable files are now allowed in most
673     places that system files were allowed in previous PSPP version.
674
675     A new CLOSE FILE HANDLE command allows the storage associated with
676     scratch files to be freed.  It also allows file handles to be
677     reassigned to new files.
678
679     For more information on scratch files, refer to the "File Handles"
680     section in the PSPP manual.  For specifics of what commands now
681     allow what kinds of files to be specified, refer to the
682     documentation on those particular commands.
683
684   Data access changes:
685
686     * Binary formats and IBM/360 formats, including ASCII/EBCDIC
687       translation, are now supported.  Use FILE HANDLE to specify the
688       format of these files.
689
690     * Little-endian, big-endian, and VAX-endian formats are now
691       supported for integer binary formats when reading and writing
692       data files.  The new RIB and WIB subcommands on the SET command
693       control endianness of integer data.  The default is the host's
694       native endianness.
695
696     * IEEE 754, VAX, and IBM hexadecimal formats are now supported for
697       floating point binary formats when reading and writing data
698       files.  The new RRB and WRB subcommands on the SET command
699       control the floating point format.  The default is the host's
700       native floating point format.
701
702     * DATA LIST now supports the SKIP subcommand, to skip records at
703       the beginning of a file.  For compatibility, DATA LIST now
704       treats N format as F format for FREE and LIST format input.
705
706     * The SAVE and XSAVE commands now support the UNSELECTED,
707       PERMISSIONS, NAMES, and MAP subcommands.
708
709     * The EXPORT command has been re-implemented to obtain better
710       results.  Support for the UNSELECTED, DIGITS, and TYPE
711       subcommands has been added.
712
713     * For compatibility, PRINT now inserts a space at the beginning of
714       every output line, even lines that would otherwise be blank,
715       when OUTFILE is specified.  (The behavior of WRITE is
716       unchanged.)
717
718     * For compatibility, PRINT EJECT now inserts the digit `1' at the
719       beginning of each line that should begin a new page.
720
721     * For compatibility, WRITE now outputs the system-missing value as
722       a field filled with spaces.  Binary formats are an exception.
723       (The behavior of PRINT is unchanged.)
724
725   Documentation:
726
727     * Input and output format descriptions have been rewritten.  They
728       now precisely describe what is accepted on input and written on
729       output.
730
731     * The descriptions of the PSPP system and portable file formats
732       have been extensively revised and improved.
733
734   For developers, the build system now requires Autoconf 2.60 and
735   Automake 1.10.
736 \f
737 Changes from 0.3.0 to 0.4.0:
738
739   Changes in build dependencies:
740
741     * The GNU Scientific Library (libgsl), version 1.6 or later, is
742       now required.
743
744     * libplot from GNU plotutils is optional.  Without it, the new
745       graphing features will not work.  If you do not have it
746       installed, you must run `configure' with --without-libplot.
747
748     * libgmp2 is no longer a dependency.
749
750   Newly implemented commands and statistical features:
751
752     * EXAMINE, including its graphing features.
753
754     * FREQUENCIES now supports percentiles.
755
756     * ONEWAY.
757
758     * PERMISSIONS.
759
760     * SHOW.
761
762     * SORT CASES now sorts stably, that is, two cases with equal sort
763       criteria will be in the same relative order before and after the
764       sort.
765
766     * T-TEST (re-written).
767
768     * DATE and USE.  These commands are parsed but otherwise ignored,
769       to enhance compatibility with certain command files that invoke
770       them unnecessarily.
771
772     * VARIABLE WIDTH, VARIABLE ALIGNMENT, and VARIABLE LEVEL.  These
773       currently have no effect on PSPP output, but their values are
774       written to and read from system files and thus may affect
775       third-party software.
776
777     * SET EPOCH implemented.
778
779     * DATA LIST FREE and DATA LIST LIST now support arbitrary field
780       delimiters.
781
782     * FILE HANDLE now supports custom tab widths.
783
784   Long variable names (and other identifiers) are now supported.  Up
785   to the first 64 bytes of each identifier is significant.  PSPP now
786   reads and writes system files compatible with SPSS version 12.
787
788   New --algorithm and --syntax command line options allow
789   SPSS-compatible or enhanced modes to be selected.
790
791   Support for transformation expressions has been rewritten and
792   significantly improved.  Refer to the manual for details.
793
794   Calculation of moments (mean, standard deviation, kurtosis,
795   skewness) has been rewritten and should now be more accurate.  In
796   --algorithm=enhanced mode moments may be more accurate than SPSS in
797   some cases.
798
799   Numerous bugs have been fixed, too many to mention here.  Many new
800   tests have been added, leading to the discovery and fixing of many
801   of these bugs.
802
803   The ASCII output driver can now squeeze multiple blank lines into
804   single blank lines.
805
806   Much of the code has been rewritten and refactored.  It is now much
807   cleaner.
808
809   The FILE TYPE and REPEATING DATA commands have been disabled for
810   this release because their implementations were deemed too buggy to
811   be useful.  They will be fixed and replaced in a future release.
812
813   New pspp-mode for Emacs (in pspp-mode.el).
814
815   Added rudimentary command-line completion for interactive input.
816
817   lib/julcal and lib/dcdflib are no longer used, so they have been
818   removed.
819
820   For developers, the build system now requires Autoconf 2.58 and
821   Automake 1.7.  The included gettext has been updated to version
822   0.12.1.
823
824   Some reports state that Texinfo 4.8, the latest version, may be
825   necessary to successfully format the documentation on some systems.
826
827 Version 0.3.0 changes since 0.2.3:
828
829   Bugs fixed:
830
831     * Using alphanumeric variables in functions under AGGREGATE
832       segfaulted.  Fixed.
833
834     * Under certain circumstances, the final case would be omitted
835       from the results of an AGGREGATE operation.  Fixed.
836
837     * Undefined behavior was invoked by referencing a freed pointer
838       under certain circumstances.  Fixed.
839
840     * A wrong record size was displayed when paging the active file to
841       disk.  Fixed.
842
843     * Not having enough temporary space for sorting caused a core
844       dump.  Fixed.
845
846     * Syntax errors in function descriptions on AGGREGATE caused core
847       dumps.  Fixed.
848
849     * A null pointer was dereferenced, causing a core dump, when
850       PERCENTILES was specified on FREQUENCIES.  This fixes the
851       problem, but PSPP still doesn't calculate percentiles.
852
853     * SORT always sorted in ascending order.  Fixed.
854
855     * Some minor memory leaks in the expression parser were removed.
856
857     * Many assertions fixed for strict ANSI C compliance.
858
859   New features:
860
861     * SET ECHO ON now implemented, but turned off by default.
862
863     * PRINT specifier supported on END REPEAT.
864
865   Other:
866
867     * System libgmp2 library is used if installed instead of
868       unconditionally using the included libgmp2 subset.
869
870     * Extensive code cleanup, which continues.
871
872     * Added CORRELATIONS command parser, but not implemented.
873
874 Version 0.2.3 changes since 0.2.2:
875
876   Bugs fixed:
877
878     * SPLIT FILE with a string variable caused a core dump.  Fixed.
879
880     * Nested INCLUDEs didn't work.  Fixed.
881
882     * The MATCH FILES procedure set the values of variables not present
883       to 0.  It should have been SYSMIS.  This is now fixed.
884
885     * The REMARK command was too aggressive about skipping lines.  It
886       didn't like being the last command in a file.
887
888     * Comment parsing wasn't consistent with the rest of the code in its
889       idea of where one command ends and another starts.  This meant
890       that sometimes commands would be mysteriously ignored.  Thanks to
891       Dr. Dirk Melcher <BZN-mdksh@t-online.de> for reporting this bug.
892
893     * The TABLE subcommand on MATCH FILES worked only erratically at
894       best.  This fixes it.  Thanks to Dr. Dirk Melcher
895       <BZN-mdksh@t-online.de> for reporting this bug.
896
897     * VARIABLE LABELS rejected a slash before the first variable
898       specification, contradicting the documentation.  Thanks to Walter
899       M. Gray <graywm@northernc.on.ca> for reporting this bug.
900
901     * Because of an incorrect optimization in memory allocation,
902       CROSSTABS sometimes segfaulted when asked to output multiple
903       tables.  Thanks to Walter M. Gray <graywm@northernc.on.ca> for
904       reporting this bug.
905
906     * CROSSTABS didn't display value labels for column and row
907       variables.  Thanks to Walter M. Gray <graywm@northernc.on.ca> for
908       reporting this bug.
909
910     * WRITE didn't write line ends.  Fixed.  Thanks to Dr. Dirk Melcher
911       <BZN-mdksh@t-online.de> for reporting this bug.
912
913     * The TABLE subcommand on MATCH FILES worked only erratically at
914       best.  This fixes it.  Thanks to Dr. Dirk Melcher
915       <BZN-mdksh@t-online.de> for reporting this bug.
916
917     * VARIABLE LABELS rejected a slash before the first variable
918       specification, contradicting the documentation.  Thanks to Walter
919       M. Gray <graywm@northernc.on.ca> for reporting this bug.
920
921     * Because of an incorrect optimization in memory allocation,
922       CROSSTABS sometimes segfaulted when asked to output multiple
923       tables.  Thanks to Walter M. Gray <graywm@northernc.on.ca> for
924       reporting this bug.
925
926     * CROSSTABS didn't display value labels for column and row
927       variables.  Thanks to Walter M. Gray <graywm@northernc.on.ca> for
928       reporting this bug.
929
930     * WRITE didn't write line ends.  Fixed.  Thanks to Dr. Dirk Melcher
931       <BZN-mdksh@t-online.de> for reporting this bug.
932
933     * MATCH FILES corrupted memory and dumped core on some syntax
934       errors.  Fixed.
935
936     * MATCH FILES should set numeric values not available to the
937       system-missing value, not to 0.  Thanks to Dr. Dirk Melcher
938       <BZN-mdksh@t-online.de> for reporting this bug.
939
940     * KEEP didn't work properly on the SAVE procedure.  Fixed.  Thanks
941       to Ralf Geschke <ralf@kuerbis.org> for reporting this bug.
942
943     * Memory leak fix.
944
945     * Some systems didn't like the way open_file was coded.  Thanks to
946       Hankin <hankin@rogue.consultco.com> for pointing this out.
947
948     * The SAVE procedure didn't save long string variables properly.
949       Fixed by this patch.  Thanks to Hankin
950       <hankin@rogue.consultco.com> for this patch.
951
952     * Minor documentation fixes for MATCH FILES.
953
954 Version 0.2.2 changes since 0.2.1:
955
956   Bugs fixed:
957
958     * Fix behavior of PRINT SPACE for negative arguments.
959
960     * Fix reading some unusual system files.
961
962     * Fix LIST problems with very long variables.  Thanks to Hankin
963       <hankin@dunno.com> for this bug report.
964
965     * Fix problems with some string format specifiers.
966
967     * Fix use of $CASENUM in expressions.  Thanks to Dirk Melcher
968       <BZN-mdksh@t-online.de> for reporting this bug.
969
970     * Additional DATA LIST FREE and DATA LIST LIST fixes.  Thanks to
971       Hankin <hankin@dunno.com> again on this one.
972
973     * Sometimes you may encounter a PSPP script that has to be
974       interpreted in interactive mode.  Now you can use the -i flag to
975       do this.
976
977     * Warnings for egcs 1.1.1 cleaned up.  (However you'll get lots of
978       `unused variable' warnings under gcc 2.7.2.3, fixing this will
979       take more effort.)
980
981     * Tests fixed.
982
983     * The files in gmp need the internationalization directory in
984       their include path.  Thanks to OKUJI Yoshinori
985       <okuji@kuicr.kyoto-u.ac.jp> for pointing this out.
986
987 Version 0.2.1 changes since 0.2.0:
988
989   Bugs fixed:
990
991     * Remember to include examples/ directory in distribution :-)
992
993     * Fixed gmp compile problems for some non-i386 architectures.
994       Thanks to Hans Olav Eggestad <olav@jordforsk.nlh.no> and others
995       for reporting this.
996
997     * DATA LIST FREE and DATA LIST LIST parsing of input files is now
998       matches the documented behavior exactly, and error messages are
999       more helpful.  Thanks to Mark H. Wood <mwood@IUPUI.Edu>.
1000
1001 Version 0.2.0 changes since 0.1.0:
1002
1003   Procedures now implemented:
1004     * CROSSTABS.  Please see documentation for caveats.
1005
1006   Transformations and utilities now implemented:
1007     * AGGREGATE
1008     * APPLY DICTIONARY
1009     * CLEAR TRANSFORMATIONS
1010     * DISPLAY (all subcommands).
1011     * ERASE
1012     * FLIP
1013     * EXPORT
1014     * HOST
1015     * IMPORT
1016     * MATCH FILES
1017     * MATRIX DATA
1018     * NEW FILE
1019     * REPEATING DATA
1020
1021   Support for input and output through pipes: "|command" and
1022   "command|" filenames; support for special filenames "-", "stdin",
1023   "stdout", "stderr".
1024
1025   New command-line features:
1026     * New option --testing-mode: Invoke heuristics to assist testing.
1027     * New option --safer, -s: Don't allow certain unsafe operations.
1028     * New option --command=CMD, -c CMD: Perform literal command CMD.
1029     * rc file ~/.pspp/rc is executed before any other files.
1030     * Now multiple syntax files can be specified.
1031
1032   Operator LAG is now implemented.
1033
1034   Added missing FILE subcommand to REREAD.
1035
1036   Table output manager completely rewritten.
1037
1038   Device configuration file syntax changed.  You will need to
1039   reinstall your `devices' file.
1040
1041   New output driver for HTML.
1042
1043   PostScript driver and prologue simplified.
1044
1045   Many bugs fixed.  General source-code cleanup.
1046
1047   Added Texinfo documentation for:
1048     * PSPP system file format
1049     * PSPP portable file format
1050     * How to write input for q2c parser generator
1051     * HTML driver
1052
1053   PSPP language is now fully documented.  Please report any
1054   inaccuracies or omissions in the documentation.
1055
1056 Changes for version 0.1.0:
1057
1058   First public release.  For changes from unreleased development
1059   versions, please see ONEWS.
1060 \f
1061 ----------------------------------------------------------------------
1062 Copyright information:
1063
1064    Permission is granted to anyone to make or distribute verbatim
1065    copies of this document as received, in any medium, provided that
1066    the copyright notice and this permission notice are preserved, thus
1067    giving the recipient permission to redistribute in turn.
1068
1069    Permission is granted to distribute modified versions of this
1070    document, or of portions of it, under the above conditions,
1071    provided also that they carry prominent notices stating who last
1072    changed them.
1073 \f
1074 Local variables:
1075 version-control: never
1076 mode: indented-text
1077 end: