@display
AGGREGATE
- OUTFILE=@{*,'file-name',file_handle@} [MODE=@{REPLACE, ADDVARIABLES@}]
+ OUTFILE=@{*,'@var{file_name}',@var{file_handle}@} [MODE=@{REPLACE, ADDVARIABLES@}]
/PRESORTED
/DOCUMENT
/MISSING=COLUMNWISE
- /BREAK=var_list
- /dest_var['label']@dots{}=agr_func(src_vars, args@dots{})@dots{}
+ /BREAK=@var{var_list}
+ /@var{dest_var}['@var{label}']@dots{}=@var{agr_func}(@var{src_vars}, @var{args}@dots{})@dots{}
@end display
@cmd{AGGREGATE} summarizes groups of cases into single cases.
(@pxref{Datasets}).
The aggregated cases are written to this file. If @samp{*} is
specified, then the aggregated cases replace the active dataset's data.
-Use of OUTFILE to write a portable file is a @pspp{} extension.
+Use of @subcmd{OUTFILE} to write a portable file is a @pspp{} extension.
-If OUTFILE=@samp{*} is given, then the subcommand MODE may also be
+If @subcmd{OUTFILE=*} is given, then the subcommand @subcmd{MODE} may also be
specified.
-The mode subcommand has two possible values: ADDVARIABLES or REPLACE.
-In REPLACE mode, the entire active dataset is replaced by a new dataset
+The mode subcommand has two possible values: @subcmd{ADDVARIABLES} or @subcmd{REPLACE}.
+In @subcmd{REPLACE} mode, the entire active dataset is replaced by a new dataset
which contains just the break variables and the destination varibles.
In this mode, the new file will contain as many cases as there are
unique combinations of the break variables.
-In ADDVARIABLES mode, the destination variables will be appended to
+In @subcmd{ADDVARIABLES} mode, the destination variables will be appended to
the existing active dataset.
Cases which have identical combinations of values in their break
variables, will receive identical values for the destination variables.
The number of cases in the active dataset will remain unchanged.
-Note that if ADDVARIABLES is specified, then the data @emph{must} be
+Note that if @subcmd{ADDVARIABLES} is specified, then the data @emph{must} be
sorted on the break variables.
By default, the active dataset will be sorted based on the break variables
before aggregation takes place. If the active dataset is already sorted
or otherwise grouped in terms of the break variables, specify
-PRESORTED to save time.
-PRESORTED is assumed if MODE=ADDVARIABLES is used.
+@subcmd{PRESORTED} to save time.
+@subcmd{PRESORTED} is assumed if @subcmd{MODE=ADDVARIABLES} is used.
-Specify DOCUMENT to copy the documents from the active dataset into the
+Specify @subcmd{DOCUMENT} to copy the documents from the active dataset into the
aggregate file (@pxref{DOCUMENT}). Otherwise, the aggregate file will
not contain any documents, even if the aggregate file replaces the
active dataset.
-Normally, only a single case (for SD and SD., two cases) need be
+Normally, only a single case (for @subcmd{SD} and @subcmd{SD}., two cases) need be
non-missing in each group for the aggregate variable to be
-non-missing. Specifying /MISSING=COLUMNWISE inverts this behavior, so
+non-missing. Specifying @subcmd{/MISSING=COLUMNWISE} inverts this behavior, so
that the aggregate variable becomes missing if any aggregated value is
missing.
-If PRESORTED, DOCUMENT, or MISSING are specified, they must appear
-between OUTFILE and BREAK.
+If @subcmd{PRESORTED}, @subcmd{DOCUMENT}, or @subcmd{MISSING} are specified, they must appear
+between @subcmd{OUTFILE} and @subcmd{BREAK}.
-At least one break variable must be specified on BREAK, a
+At least one break variable must be specified on @subcmd{BREAK}, a
required subcommand. The values of these variables are used to divide
the active dataset into groups to be summarized. In addition, at least
one @var{dest_var} must be specified.
Each set must have exactly as many source variables as aggregation
variables. Each aggregation variable receives the results of applying
the specified aggregation function to the corresponding source
-variable. The MEAN, MEDIAN, SD, and SUM aggregation functions may only be
+variable. The @subcmd{MEAN}, @subcmd{MEDIAN}, @subcmd{SD}, and @subcmd{SUM}
+aggregation functions may only be
applied to numeric variables. All the rest may be applied to numeric
and string variables.
The available aggregation functions are as follows:
@table @asis
-@item FGT(var_name, value)
+@item @subcmd{FGT(@var{var_name}, @var{value})}
Fraction of values greater than the specified constant. The default
format is F5.3.
-@item FIN(var_name, low, high)
+@item @subcmd{FIN(@var{var_name}, @var{low}, @var{high})}
Fraction of values within the specified inclusive range of constants.
The default format is F5.3.
-@item FLT(var_name, value)
+@item @subcmd{FLT(@var{var_name}, @var{value})}
Fraction of values less than the specified constant. The default
format is F5.3.
-@item FIRST(var_name)
+@item @subcmd{FIRST(@var{var_name})}
First non-missing value in break group. The aggregation variable
receives the complete dictionary information from the source variable.
-The sort performed by AGGREGATE (and by SORT CASES) is stable, so that
+The sort performed by @cmd{AGGREGATE} (and by @cmd{SORT CASES}) is stable, so that
the first case with particular values for the break variables before
sorting will also be the first case in that break group after sorting.
-@item FOUT(var_name, low, high)
+@item @subcmd{FOUT(@var{var_name}, @var{low}, @var{high})}
Fraction of values strictly outside the specified range of constants.
The default format is F5.3.
-@item LAST(var_name)
+@item @subcmd{LAST(@var{var_name})}
Last non-missing value in break group. The aggregation variable
receives the complete dictionary information from the source variable.
-The sort performed by AGGREGATE (and by SORT CASES) is stable, so that
+The sort performed by @cmd{AGGREGATE} (and by @cmd{SORT CASES}) is stable, so that
the last case with particular values for the break variables before
sorting will also be the last case in that break group after sorting.
-@item MAX(var_name)
+@item @subcmd{MAX(@var{var_name})}
Maximum value. The aggregation variable receives the complete
dictionary information from the source variable.
-@item MEAN(var_name)
+@item @subcmd{MEAN(@var{var_name})}
Arithmetic mean. Limited to numeric values. The default format is
F8.2.
-@item MEDIAN(var_name)
+@item @subcmd{MEDIAN(@var{var_name})}
The median value. Limited to numeric values. The default format is F8.2.
-@item MIN(var_name)
+@item @subcmd{MIN(@var{var_name})}
Minimum value. The aggregation variable receives the complete
dictionary information from the source variable.
-@item N(var_name)
+@item @subcmd{N(@var{var_name})}
Number of non-missing values. The default format is F7.0 if weighting
is not enabled, F8.2 if it is (@pxref{WEIGHT}).
-@item N
+@item @subcmd{N}
Number of cases aggregated to form this group. The default format is
F7.0 if weighting is not enabled, F8.2 if it is (@pxref{WEIGHT}).
-@item NMISS(var_name)
+@item @subcmd{NMISS(@var{var_name})}
Number of missing values. The default format is F7.0 if weighting is
not enabled, F8.2 if it is (@pxref{WEIGHT}).
-@item NU(var_name)
+@item @subcmd{NU(@var{var_name})}
Number of non-missing values. Each case is considered to have a weight
of 1, regardless of the current weighting variable (@pxref{WEIGHT}).
The default format is F7.0.
-@item NU
+@item @subcmd{NU}
Number of cases aggregated to form this group. Each case is considered
to have a weight of 1, regardless of the current weighting variable.
The default format is F7.0.
-@item NUMISS(var_name)
+@item @subcmd{NUMISS(@var{var_name})}
Number of missing values. Each case is considered to have a weight of
1, regardless of the current weighting variable. The default format is F7.0.
-@item PGT(var_name, value)
+@item @subcmd{PGT(@var{var_name}, @var{value})}
Percentage between 0 and 100 of values greater than the specified
constant. The default format is F5.1.
-@item PIN(var_name, low, high)
+@item @subcmd{PIN(@var{var_name}, @var{low}, @var{high})}
Percentage of values within the specified inclusive range of
constants. The default format is F5.1.
-@item PLT(var_name, value)
+@item @subcmd{PLT(@var{var_name}, @var{value})}
Percentage of values less than the specified constant. The default
format is F5.1.
-@item POUT(var_name, low, high)
+@item @subcmd{POUT(@var{var_name}, @var{low}, @var{high})}
Percentage of values strictly outside the specified range of
constants. The default format is F5.1.
-@item SD(var_name)
+@item @subcmd{SD(@var{var_name})}
Standard deviation of the mean. Limited to numeric values. The
default format is F8.2.
-@item SUM(var_name)
+@item @subcmd{SUM(@var{var_name})}
Sum. Limited to numeric values. The default format is F8.2.
@end table
Aggregation functions compare string values in terms of internal
-character codes. On most modern computers, this is a form of ASCII.
+character codes.
+On most modern computers, this is @acronym{ASCII} or a superset thereof.
The aggregation functions listed above exclude all user-missing values
from calculations. To include user-missing values, insert a period
@vindex AUTORECODE
@display
-AUTORECODE VARIABLES=src_vars INTO dest_vars
+AUTORECODE VARIABLES=@var{src_vars} INTO @var{dest_vars}
[ /DESCENDING ]
[ /PRINT ]
[ /GROUP ]
takes on and maps them onto values 1@dots{}@var{n} on a new numeric
variable.
-Subcommand VARIABLES is the only required subcommand and must come
-first. Specify VARIABLES, an equals sign (@samp{=}), a list of source
-variables, INTO, and a list of target variables. There must the same
+Subcommand @subcmd{VARIABLES} is the only required subcommand and must come
+first. Specify @subcmd{VARIABLES}, an equals sign (@samp{=}), a list of source
+variables, @subcmd{INTO}, and a list of target variables. There must the same
number of source and target variables. The target variables must not
already exist.
is based on character code comparisons) are recoded to increasing values
of its target variable. To cause increasing values of a source variable
to be recoded to decreasing values of its target variable (@var{n} down
-to 1), specify DESCENDING.
+to 1), specify @subcmd{DESCENDING}.
-PRINT is currently ignored.
+@subcmd{PRINT} is currently ignored.
The @subcmd{GROUP} subcommand is relevant only if more than one variable is to be
recoded. It causes a single mapping between source and target values to
be used, instead of one map per variable.
-If /BLANK=MISSING is given, then string variables which contain only
-whitespace are recoded as SYSMIS. If /BLANK=VALID is given then they
-will be allocated a value like any other. /BLANK is not relevant
-to numeric values. /BLANK=VALID is the default.
+If @subcmd{/BLANK=MISSING} is given, then string variables which contain only
+whitespace are recoded as SYSMIS. If @subcmd{/BLANK=VALID} is given then they
+will be allocated a value like any other. @subcmd{/BLANK} is not relevant
+to numeric values. @subcmd{/BLANK=VALID} is the default.
@cmd{AUTORECODE} is a procedure. It causes the data to be read.
@vindex COMPUTE
@display
-COMPUTE variable = expression.
+COMPUTE @var{variable} = @var{expression}.
+@end display
or
-COMPUTE vector(index) = expression.
+@display
+COMPUTE vector(@var{index}) = @var{expression}.
@end display
@cmd{COMPUTE} assigns the value of an expression to a target
they can be used as targets for @cmd{COMPUTE}.
The target variable may be specified as an element of a vector
-(@pxref{VECTOR}). In this case, a vector index expression must be
-specified in parentheses following the vector name. The index
-expression must evaluate to a numeric value that, after rounding down
+(@pxref{VECTOR}). In this case, an expression @var{index} must be
+specified in parentheses following the vector name. The expression @var{index}
+must evaluate to a numeric value that, after rounding down
to the nearest integer, is a valid index for the named vector.
Using @cmd{COMPUTE} to assign to a variable specified on @cmd{LEAVE}
@vindex COUNT
@display
-COUNT var_name = var@dots{} (value@dots{}).
+COUNT @var{var_name} = @var{var}@dots{} (@var{value}@dots{}).
-Each value takes one of the following forms:
- number
- string
- num1 THRU num2
+Each @var{value} takes one of the following forms:
+ @var{number}
+ @var{string}
+ @var{num1} THRU @var{num2}
MISSING
SYSMIS
-In addition, num1 and num2 can be LO or LOWEST, or HI or HIGHEST,
-respectively.
+where @var{num1} is a numeric expression or the words @subcmd{LO} or @subcmd{LOWEST}
+ and @var{num2} is a numeric expression or @subcmd{HI} or @subcmd{HIGHEST}.
@end display
@cmd{COUNT} creates or replaces a numeric @dfn{target} variable that
values. They are @strong{not} treated as system-missing values.
User-missing values that are criterion values or inside ranges of
criterion values are counted as any other values. However (for numeric
-variables), keyword MISSING may be used to refer to all system-
+variables), keyword @subcmd{MISSING} may be used to refer to all system-
and user-missing values.
@cmd{COUNT} target variables are assigned values in the order
-specified. In the command @code{COUNT A=A B(1) /B=A B(2).}, the
+specified. In the command @subcmd{COUNT @var{A}=@var{A} @var{B}(1) /@var{B}=@var{A} @var{B}(2).}, the
following actions occur:
@itemize @minus
@item
-The number of occurrences of 1 between @code{A} and @code{B} is counted.
+The number of occurrences of 1 between @var{A} and @var{B} is counted.
@item
-@code{A} is assigned this value.
+@var{A} is assigned this value.
@item
-The number of occurrences of 1 between @code{B} and the @strong{new}
-value of @code{A} is counted.
+The number of occurrences of 1 between @var{B} and the @strong{new}
+value of @var{A} is counted.
@item
-@code{B} is assigned this value.
+@var{B} is assigned this value.
@end itemize
Despite this ordering, all @cmd{COUNT} criterion variables must exist
@vindex FLIP
@display
-FLIP /VARIABLES=var_list /NEWNAMES=var_name.
+FLIP /VARIABLES=@var{var_list} /NEWNAMES=@var{var_name}.
@end display
@cmd{FLIP} transposes rows and columns in the active dataset. It
specified are discarded. If the @subcmd{VARIABLES} subcommand is omitted, all
variables are selected for transposition.
-The variables specified by NEWNAMES, which must be a string variable, is
+The variables specified by @subcmd{NEWNAMES}, which must be a
+string variable, is
used to give names to the variables created by @cmd{FLIP}. Only the
first 8 characters of the variable are used. If
-NEWNAMES is not
+@subcmd{NEWNAMES} is not
specified then the default is a variable named CASE_LBL, if it exists.
-If it does not then the variables created by FLIP are named VAR000
+If it does not then the variables created by @cmd{FLIP} are named VAR000
through VAR999, then VAR1000, VAR1001, and so on.
-When a NEWNAMES variable is available, the names must be canonicalized
+When a @subcmd{NEWNAMES} variable is available, the names must be canonicalized
before becoming variable names. Invalid characters are replaced by
letter @samp{V} in the first position, or by @samp{_} in subsequent
positions. If the name thus generated is not unique, then numeric
extensions are added, starting with 1, until a unique name is found or
there are no remaining possibilities. If the latter occurs then the
-FLIP operation aborts.
+@cmd{FLIP} operation aborts.
The resultant dictionary contains a CASE_LBL variable, a string
variable of width 8, which stores the names of the variables in the
transposed using @cmd{FLIP}, this variable can be used to recreate the
original variable names.
-FLIP honors @cmd{N OF CASES} (@pxref{N OF CASES}). It ignores
+@cmd{FLIP} honors @cmd{N OF CASES} (@pxref{N OF CASES}). It ignores
@cmd{TEMPORARY} (@pxref{TEMPORARY}), so that ``temporary''
transformations become permanent.
@vindex IF
@display
-IF condition variable=expression.
+IF @var{condition} @var{variable}=@var{expression}.
+@end display
or
-IF condition vector(index)=expression.
+@display
+IF @var{condition} vector(@var{index})=@var{expression}.
@end display
The @cmd{IF} transformation conditionally assigns the value of a target
expression.
Specify a boolean-valued expression (@pxref{Expressions}) to be tested
-following the IF keyword. This expression is evaluated for each case.
+following the @cmd{IF} keyword. This expression is evaluated for each case.
If the value is true, then the value of the expression is computed and
assigned to the specified variable. If the value is false or missing,
nothing is done. Numeric and string variables may be
[INTO @var{dest_vars}].
@end display
-Following the RECODE keyword itself comes @var{src_vars} which is a list
+Following the @cmd{RECODE} keyword itself comes @var{src_vars} which is a list
of variables whose values are to be transformed.
These variables may be string variables or they may be numeric.
However the list must be homogeneous; you may not mix string variables and
@vindex SORT CASES
@display
-SORT CASES BY var_list[(@{D|A@}] [ var_list[(@{D|A@}] ] ...
+SORT CASES BY @var{var_list}[(@{D|A@}] [ @var{var_list}[(@{D|A@}] ] ...
@end display
@cmd{SORT CASES} sorts the active dataset by the values of one or more
variables.
-Specify BY and a list of variables to sort by. By default, variables
-are sorted in ascending order. To override sort order, specify (D) or
-(DOWN) after a list of variables to get descending order, or (A) or (UP)
+Specify @subcmd{BY} and a list of variables to sort by. By default, variables
+are sorted in ascending order. To override sort order, specify @subcmd{(D)} or
+@subcmd{(DOWN)} after a list of variables to get descending order, or @subcmd{(A)} or @subcmd{(UP)}
for ascending order. These apply to all the listed variables
-up until the preceding (A), (D), (UP) or (DOWN).
+up until the preceding @subcmd{(A)}, @subcmd{(D)}, @subcmd{(UP)} or @subcmd{(DOWN)}.
The sort algorithms used by @cmd{SORT CASES} are stable. That is,
records that have equal values of the sort variables will have the
If workspace is exhausted, it falls back to a merge sort algorithm that
involves creates numerous temporary files.
-@cmd{SORT CASES} may not be specified following TEMPORARY.
+@cmd{SORT CASES} may not be specified following @cmd{TEMPORARY}.
projects / pspp / blobdiff