* INPUT PROGRAM:: Support for complex input programs.
* LIST:: List cases in the active dataset.
* NEW FILE:: Clear the active dataset.
-* MATRIX DATA:: Defining matrix material for procedures.
* PRINT:: Display values in print formats.
* PRINT EJECT:: Eject the current page then print.
* PRINT SPACE:: Print blank lines.
@cmd{NEW FILE} command clears the dictionary and data from the current
active dataset.
-@node MATRIX DATA
-@section MATRIX DATA
-@vindex MATRIX DATA
-
-@display
-MATRIX DATA
- VARIABLES = @var{columns}
- [FILE='@var{file_name}'| INLINE @}
- [/FORMAT= [@{LIST | FREE@}]
- [@{UPPER | LOWER | FULL@}]
- [@{DIAGONAL | NODIAGONAL@}]]
- [/N= @var{n}]
- [/SPLIT= @var{split_variables}].
-@end display
-
-The @cmd{MATRIX DATA} command is used to input data in the form of matrices
-which can subsequently be used by other commands. If the
-@subcmd{FILE} is omitted or takes the value @samp{INLINE} then the command
-should immediately followed by @cmd{BEGIN DATA} (@pxref{BEGIN DATA}).
-
-There is one mandatory subcommand, @i{viz:} @subcmd{VARIABLES}, which defines
-the @var{columns} of the matrix.
-Normally, the @var{columns} should include an item called @samp{ROWTYPE_}.
-The @samp{ROWTYPE_} column is used to specify the purpose of a row in the
-matrix.
-
-@example
-matrix data
- variables = rowtype_ var01 TO var08.
-
-begin data.
-mean 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7
-sd 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5
-n 92 92 92 92 92 92 92 92
-corr 1.00
-corr .18 1.00
-corr -.22 -.17 1.00
-corr .36 .31 -.14 1.00
-corr .27 .16 -.12 .22 1.00
-corr .33 .15 -.17 .24 .21 1.00
-corr .50 .29 -.20 .32 .12 .38 1.00
-corr .17 .29 -.05 .20 .27 .20 .04 1.00
-end data.
-@end example
-
-In the above example, the first three rows have ROWTYPE_ values of
-@samp{mean}, @samp{sd}, and @samp{n}. These indicate that the rows
-contain mean values, standard deviations and counts, respectively.
-All subsequent rows have a ROWTYPE_ of @samp{corr} which indicates
-that the values are correlation coefficients.
-
-Note that in this example, the upper right values of the @samp{corr}
-values are blank, and in each case, the rightmost value is unity.
-This is because, the
-@subcmd{FORMAT} subcommand defaults to @samp{LOWER DIAGONAL},
-which indicates that only the lower triangle is provided in the data.
-The opposite triangle is automatically inferred. One could instead
-specify the upper triangle as follows:
-
-
-@example
-matrix data
- variables = rowtype_ var01 TO var08
- /format = upper nodiagonal.
-
-begin data.
-mean 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7
-sd 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5
-n 92 92 92 92 92 92 92 92
-corr .17 .50 -.33 .27 .36 -.22 .18
-corr .29 .29 -.20 .32 .12 .38
-corr .05 .20 -.15 .16 .21
-corr .20 .32 -.17 .12
-corr .27 .12 -.24
-corr -.20 -.38
-corr .04
-end data.
-@end example
-
-In this example the @samp{NODIAGONAL} keyword is used. Accordingly
-the diagonal values of the matrix are omitted. This implies that
-there is one less @samp{corr} line than there are variables.
-If the @samp{FULL} option is passed to the @subcmd{FORMAT} subcommand,
-then all the matrix elements must be provided, including the diagonal
-elements.
-
-In the preceding examples, each matrix row has been specified on a
-single line. If you pass the keyword @var{FREE} to @subcmd{FORMAT}
-then the data may be data for several matrix rows may be specified on
-the same line, or a single row may be split across lines.
-
-The @subcmd{N} subcommand may be used to specify the number
-of valid cases for each variable. It should not be used if the
-data contains a record whose ROWTYPE_ column is @samp{N} or @samp{N_VECTOR}.
-It implies a @samp{N} record whose values are all @var{n}.
-That is to say,
-@example
-matrix data
- variables = rowtype_ var01 TO var04
- /format = upper nodiagonal
- /n = 99.
-begin data
-mean 34 35 36 37
-sd 22 11 55 66
-corr 9 8 7
-corr 6 5
-corr 4
-end data.
-@end example
-produces an effect identical to
-@example
-matrix data
- variables = rowtype_ var01 TO var04
- /format = upper nodiagonal
-begin data
-n 99 99 99 99
-mean 34 35 36 37
-sd 22 11 55 66
-corr 9 8 7
-corr 6 5
-corr 4
-end data.
-@end example
-
-
-The @subcmd{SPLIT} is used to indicate that variables are to be
-considered as split variables. For example, the following
-defines two matrices using the variable @samp{S1} to distinguish
-between them.
-
-@example
-matrix data
- variables = s1 rowtype_ var01 TO var04
- /split = s1
- /format = full diagonal.
-
-begin data
-0 mean 34 35 36 37
-0 sd 22 11 55 66
-0 n 99 98 99 92
-0 corr 1 9 8 7
-0 corr 9 1 6 5
-0 corr 8 6 1 4
-0 corr 7 5 4 1
-1 mean 44 45 34 39
-1 sd 23 15 51 46
-1 n 98 34 87 23
-1 corr 1 2 3 4
-1 corr 2 1 5 6
-1 corr 3 5 1 7
-1 corr 4 6 7 1
-end data.
-@end example
-
@node PRINT
@section PRINT
@vindex PRINT
projects / pspp / blobdiff