+++ /dev/null
-# PSPP's standard output drivers.
-#
-# An introduction to the use of PSPP output drivers and this file
-# follows. However, refer to PSPP's Texinfo documentation for full
-# information.
-#
-# Each output driver specification must be on a single line; however,
-# lines may be spliced with a \ at the end of a line. Line splicing
-# is performed *before* comments (introduced by `#') are removed.
-#
-# Format is `DRIVERNAME:CLASSNAME:DEVICETYPE:OPTIONS'.
-#
-# DRIVERNAME is the name that identifies the driver to the user. It
-# is the name used on the -o command-line option.
-#
-# CLASSNAME is the internal name of the type of driver. Device
-# classes can be listed with `pspp -l'.
-#
-# DEVICETYPE identifies what type or types the devices is. Zero or
-# more of the following keywords may be given here: screen, printer,
-# or listing.
-#
-# OPTIONS is a list of key/value pairs to pass to the driver. Use
-# spaces to separate pairs, and '=' to separate keys and values.
-# Quotes " or ' can be used to delimit values that contain spaces.
-# Example: paper-size="Envelope #10" charset=latin1
-#
-# Driver categories may be defined with lines of the form:
-#
-# category=driver1 driver2 driver3 ... driverN
-#
-# To disable a driver, define a category with nothing on the right
-# side.
-#
-# Macros may be defined with lines of the form:
-#
-# define macro-name definition
-#
-# Macros may not be recursive; they may not take arguments. (However,
-# `definition' is macro-expanded *at time of definition*.) Macros are
-# referenced with $var or ${var} syntax; the latter is preferred.
-
-# Preferred devices.
-default=list-ascii
-interactive=tty-ascii
-
-# Output files.
-define tty-output-file "|more"
-define list-output-file "pspp.list"
-
-# Generic ASCII devices
-tty-ascii:ascii:screen:squeeze=on headers=off top-margin=0 bottom-margin=0 \
- paginate=off length=auto width=auto output-file=${tty-output-file}
-list-ascii:ascii:listing:length=66 width=79 output-file=${list-output-file}
-raw-ascii:ascii:listing:width=9999 length=9999 output-file=${list-output-file} \
- emphasis=none headers=off paginate=off squeeze=on \
- top-margin=0 bottom-margin=0
-
-# ASCII devices that support bold & underline via backspacing.
-tty-ascii-bi:ascii:screen:output-file=${tty-output-file}
-list-ascii-bi:ascii:listing:length=66 width=79 output-file=${list-output-file}
-
-# VT100 graphics devices.
-define vt100-graphics \
- init='\033(B\033)0' \
- box[1000]='\16q\17' box[1010]='\16q\17' box[0010]='\16q\17' \
- box[0100]='\16x\17' box[0101]='\16x\17' box[0001]='\16x\17' \
- box[0011]='\16j\17' box[1100]='\16l\17' box[0110]='\16k\17' \
- box[1001]='\16m\17' box[1110]='\16w\17' box[1101]='\16t\17' \
- box[0111]='\16u\17' box[1011]='\16v\17' box[1111]='\16n\17'
-
-tty-vt100:ascii:screen:squeeze=on headers=off top-margin=0 bottom-margin=0 \
- paginate=off output-file=${tty-output-file} ${vt100-graphics}
-list-vt100:ascii:listing:length=66 width=79 output-file=${list-output-file} \
- ${vt100-graphics}
-
-# HTML device.
-html:html::
-
-# PostScript device.
-list-ps:postscript::
-
-# Cairo devices.
-pdf:cairo:listing:
-svg:cairo:listing:output-type=svg output-file="pspp.svg"
-ps-cairo:cairo:listing:output-type=ps output-file="pspp-cairo.ps"
-
-odt:odf:listing:debug=off output-file="pspp.odt"
-
-# Devices that support the IBM PC line-drawing characters.
-define ibmpc-graphics \
- box[0000]='\x20' box[0001]='\xb3' box[0002]='\xba' \
- box[0010]='\xc4' box[0011]='\xd9' box[0012]='\xbd' \
- box[0020]='\xcd' box[0021]='\xbe' box[0022]='\xbc' \
- box[0100]='\xb3' box[0101]='\xb3' box[0102]='\xc4' \
- box[0110]='\xbf' box[0111]='\xb4' box[0112]='\xb6' \
- box[0120]='\xb8' box[0121]='\xb5' box[0122]='\xb9' \
- box[0200]='\xba' box[0201]='\xba' box[0202]='\xba' \
- box[0210]='\xb7' box[0211]='\xb6' box[0212]='\xb6' \
- box[0220]='\xbb' box[0221]='\xb9' box[0222]='\xb9' \
- box[1000]='\xc4' box[1001]='\xc0' box[1002]='\xd3' \
- box[1010]='\xc4' box[1011]='\xc1' box[1012]='\xd0' \
- box[1020]='\xcd' box[1021]='\xcf' box[1022]='\xca' \
- box[1100]='\xda' box[1101]='\xc3' box[1102]='\xc7' \
- box[1110]='\xc2' box[1111]='\xc5' box[1112]='\xd7' \
- box[1120]='\xd1' box[1121]='\xd8' box[1122]='\xce' \
- box[1200]='\xd6' box[1201]='\xc7' box[1202]='\xc7' \
- box[1210]='\xd2' box[1211]='\xd7' box[1212]='\xd7' \
- box[1220]='\xca' box[1221]='\xce' box[1222]='\xce' \
- box[2000]='\xcd' box[2001]='\xd4' box[2002]='\xc8' \
- box[2010]='\xcd' box[2011]='\xcf' box[2012]='\xca' \
- box[2020]='\xcd' box[2021]='\xcf' box[2022]='\xca' \
- box[2100]='\xd5' box[2101]='\xc6' box[2102]='\xcc' \
- box[2110]='\xd1' box[2111]='\xd8' box[2112]='\xce' \
- box[2120]='\xd1' box[2121]='\xd8' box[2122]='\xce' \
- box[2200]='\xc9' box[2201]='\xcc' box[2202]='\xcc' \
- box[2210]='\xcb' box[2211]='\xce' box[2212]='\xce' \
- box[2220]='\xcb' box[2221]='\xce' box[2222]='\xce'
-
-tty-ibmpc:ascii:screen:length=$viewlength width=$viewwidth ${ibmpc-graphics} \
- output-file=${tty-output-file}
-list-ibmpc:ascii:listing:length=66 width=79 output-file=${list-output-file} \
- ${ibmpc-graphics}
-
-# Devices that support Unicode line-drawing characters in UTF-8 encoding.
-# PSPP doesn't support a \u escape but if it did then this is how these
-# would appear:
-#
-# define utf8-graphics \
-# box[0000]='\u0020' box[1000]='\u2576' box[2000]='\u2550' \
-# box[0100]='\u2577' box[1100]='\u256D' box[2100]='\u2552' \
-# box[0200]='\u2551' box[1200]='\u2553' box[2200]='\u2554' \
-# box[0010]='\u2574' box[1010]='\u2500' box[2010]='\u2550' \
-# box[0110]='\u256E' box[1110]='\u252C' box[2110]='\u2564' \
-# box[0210]='\u2556' box[1210]='\u2565' box[2210]='\u2566' \
-# box[0020]='\u2550' box[1020]='\u2550' box[2020]='\u2550' \
-# box[0120]='\u2555' box[1120]='\u2564' box[2120]='\u2564' \
-# box[0220]='\u2557' box[1220]='\u2566' box[2220]='\u2566' \
-# box[0001]='\u2575' box[1001]='\u2570' box[2001]='\u2558' \
-# box[0101]='\u2502' box[1101]='\u251C' box[2101]='\u255E' \
-# box[0201]='\u2551' box[1201]='\u255F' box[2201]='\u2560' \
-# box[0011]='\u256F' box[1011]='\u2534' box[2011]='\u2567' \
-# box[0111]='\u2524' box[1111]='\u253C' box[2111]='\u256A' \
-# box[0211]='\u2562' box[1211]='\u256B' box[2211]='\u256C' \
-# box[0021]='\u255B' box[1021]='\u2567' box[2021]='\u2567' \
-# box[0121]='\u2561' box[1121]='\u256A' box[2121]='\u256A' \
-# box[0221]='\u2563' box[1221]='\u256C' box[2221]='\u256C' \
-# box[0002]='\u2551' box[1002]='\u2559' box[2002]='\u255A' \
-# box[0102]='\u2551' box[1102]='\u255F' box[2102]='\u2560' \
-# box[0202]='\u2551' box[1202]='\u255F' box[2202]='\u2560' \
-# box[0012]='\u255C' box[1012]='\u2568' box[2012]='\u2569' \
-# box[0112]='\u2562' box[1112]='\u256A' box[2112]='\u256C' \
-# box[0212]='\u2562' box[1212]='\u256B' box[2212]='\u256C' \
-# box[0022]='\u255D' box[1022]='\u2569' box[2022]='\u2569' \
-# box[0122]='\u2563' box[1122]='\u256C' box[2122]='\u256C' \
-# box[0222]='\u2563' box[1222]='\u256C' box[2222]='\u256C'
-#
-# Instead, we encode them in UTF-8 by hand below.
-#
-# Here is a little Perl program that I used to do this translation:
-#
-# sub utf8_encode {
-# my $val = hex($_[0]);
-# my $d0 = 0xe0 | ($val >> 12);
-# my $d1 = 0x80 | (($val >> 6) & 0x3f);
-# my $d2 = 0x80 | ($val & 0x3f);
-# return sprintf('\x%02x\x%02x\x%02x', $d0, $d1, $d2);
-# }
-# while (<>) {
-# s/\\u(....)/utf8_encode($1)/ge;
-# print $_;
-# }
-#
-define utf8-graphics \
- box[0000]='\xe0\x80\xa0' box[1000]='\xe2\x95\xb6' box[2000]='\xe2\x95\x90' \
- box[0100]='\xe2\x95\xb7' box[1100]='\xe2\x95\xad' box[2100]='\xe2\x95\x92' \
- box[0200]='\xe2\x95\x91' box[1200]='\xe2\x95\x93' box[2200]='\xe2\x95\x94' \
- box[0010]='\xe2\x95\xb4' box[1010]='\xe2\x94\x80' box[2010]='\xe2\x95\x90' \
- box[0110]='\xe2\x95\xae' box[1110]='\xe2\x94\xac' box[2110]='\xe2\x95\xa4' \
- box[0210]='\xe2\x95\x96' box[1210]='\xe2\x95\xa5' box[2210]='\xe2\x95\xa6' \
- box[0020]='\xe2\x95\x90' box[1020]='\xe2\x95\x90' box[2020]='\xe2\x95\x90' \
- box[0120]='\xe2\x95\x95' box[1120]='\xe2\x95\xa4' box[2120]='\xe2\x95\xa4' \
- box[0220]='\xe2\x95\x97' box[1220]='\xe2\x95\xa6' box[2220]='\xe2\x95\xa6' \
- box[0001]='\xe2\x95\xb5' box[1001]='\xe2\x95\xb0' box[2001]='\xe2\x95\x98' \
- box[0101]='\xe2\x94\x82' box[1101]='\xe2\x94\x9c' box[2101]='\xe2\x95\x9e' \
- box[0201]='\xe2\x95\x91' box[1201]='\xe2\x95\x9f' box[2201]='\xe2\x95\xa0' \
- box[0011]='\xe2\x95\xaf' box[1011]='\xe2\x94\xb4' box[2011]='\xe2\x95\xa7' \
- box[0111]='\xe2\x94\xa4' box[1111]='\xe2\x94\xbc' box[2111]='\xe2\x95\xaa' \
- box[0211]='\xe2\x95\xa2' box[1211]='\xe2\x95\xab' box[2211]='\xe2\x95\xac' \
- box[0021]='\xe2\x95\x9b' box[1021]='\xe2\x95\xa7' box[2021]='\xe2\x95\xa7' \
- box[0121]='\xe2\x95\xa1' box[1121]='\xe2\x95\xaa' box[2121]='\xe2\x95\xaa' \
- box[0221]='\xe2\x95\xa3' box[1221]='\xe2\x95\xac' box[2221]='\xe2\x95\xac' \
- box[0002]='\xe2\x95\x91' box[1002]='\xe2\x95\x99' box[2002]='\xe2\x95\x9a' \
- box[0102]='\xe2\x95\x91' box[1102]='\xe2\x95\x9f' box[2102]='\xe2\x95\xa0' \
- box[0202]='\xe2\x95\x91' box[1202]='\xe2\x95\x9f' box[2202]='\xe2\x95\xa0' \
- box[0012]='\xe2\x95\x9c' box[1012]='\xe2\x95\xa8' box[2012]='\xe2\x95\xa9' \
- box[0112]='\xe2\x95\xa2' box[1112]='\xe2\x95\xaa' box[2112]='\xe2\x95\xac' \
- box[0212]='\xe2\x95\xa2' box[1212]='\xe2\x95\xab' box[2212]='\xe2\x95\xac' \
- box[0022]='\xe2\x95\x9d' box[1022]='\xe2\x95\xa9' box[2022]='\xe2\x95\xa9' \
- box[0122]='\xe2\x95\xa3' box[1122]='\xe2\x95\xac' box[2122]='\xe2\x95\xac' \
- box[0222]='\xe2\x95\xa3' box[1222]='\xe2\x95\xac' box[2222]='\xe2\x95\xac'
-
-tty-utf8:ascii:screen:length=$viewlength width=$viewwidth ${utf8-graphics} \
- output-file=${tty-output-file} emphasis=none
-list-utf8:ascii:listing:length=66 width=79 output-file=${list-output-file} \
- ${utf8-graphics} emphasis=none
-
-# Local Variables:
-# fill-prefix: "# "
-# End:
projects / pspp / blobdiff