**************************************
These instructions are based on the generic GNU installation
-instructions, but they have been tailored for PSPP.
+instructions, but they have been tailored for PSPP. These instructions
+apply only to people wishing to build and install PSPP from source.
+
+Overview
+========
+
+PSPP uses the standard GNU configuration system. Therefore, if all is well,
+the following simple procedure should work, even on non-GNU systems:
+
+ tar -xzf pspp-*.tar.gz
+ cd pspp-*
+ ./configure
+ make
+ sudo make install
+
+Obviously, you should replace 'pspp-*' in the above, with the name of
+the tarball you are installing.
+
+In 99% of cases, that is all you have to do - FINISHED!
+
+
+
+
+If any part of the above process fails, then it is
+likely that one or more of the necessary prerequisites is missing
+from your system. The following paragraphs contain highly detailed
+information which will help you fix this.
+
Before You Install
==================
Before you install PSPP, you will need to install certain prerequisite
packages. You may also want to install other packages that enable
-additional functionality in PSPP.
+additional functionality in PSPP. Please note, if you are installing
+any of the libararies mentioned below using pre-prepared binary
+packages provided by popular GNU/Linux vendors, you may need to ensure
+that you install the "development" versions (normally postfixed with
+-dev or -devel).
If you do not know whether you have these installed already, you may
proceed to "Basic Installation", below. The PSPP configuration
The following packages are required to install PSPP:
- * An ANSI C compiler and tool chain. On Unix-like systems, we
+ * A C compiler and tool chain. On Unix-like systems, we
recommend GCC, but any modern compilation environment should
work. On Microsoft Windows, Cygwin (http://www.cygwin.com/) and
MinGW (http://www.mingw.org/) are known to work.
* The GNU Scientific Library (http://www.gnu.org/software/gsl/),
- version 1.6 or later, including libgslcblas included with GSL.
+ version 1.13 or later, including libgslcblas included with GSL.
- * Perl (http://www.perl.org/), version 5.005_03 or later. Perl is
+ * Python (https://python.org/), version 3.4 or later. Python is
required during build but not after installation.
* iconv, which should be installed as part of a Unix-like system.
If you don't have a version already, you can install GNU
libiconv (http://www.gnu.org/software/libiconv/).
-The following package is required to enable PSPP's graphing features.
-If you cannot arrange to install it, you must run `configure' with
---without-libplot.
+ * Cairo (http://cairographics.org/), version 1.12 or later.
+
+ * Pango (http://www.pango.org/), version 1.22 or later.
+
+ * zlib (http://www.zlib.net/).
+
+ * libxml2 (http://xmlsoft.org/).
- * libplot, from GNU plotutils
- (http://www.gnu.org/software/plotutils/).
+ * gettext version 0.20 or later.
The following packages are required to enable PSPPIRE, the graphical
user interface for PSPP. If you cannot install them or do not wish to
0.18 and 0.19 have a bug that will prevent library detection,
but other versions should be fine.
- * GTK+ (http://www.gtk.org/), version 2.12.0 or later.
+ * GTK+ (http://www.gtk.org/), version 3.22.0 or later.
- * libglade (http://www.jamesh.id.au/software/libglade/), version
- 2.6 or later.
+ * GtkSourceView (http://projects.gnome.org/gtksourceview/)
+ version 3.x (3.4.2 or later) or 4.x.
-Installing the following packages will allow your PSPP binary to read
-Gnumeric files.
+ * GNU Spread Sheet Widget (http://www.gnu.org/software/ssw)
+ version 0.7 or later.
- * pkg-config (http://pkg-config.freedesktop.org/wiki/). Versions
- 0.18 and 0.19 have a bug that will prevent library detection,
- but other versions should be fine.
+The following packages are only needed to build and test the Perl
+module:
- * zlib (http://www.zlib.net/).
+ * Perl (https://www.perl.org/), version 5.005_03 or later.
- * libxml2 (http://xmlsoft.org/).
+ * The Config::Perl::V module for Perl (https://cpan.org).
-The following packages are optional.
+ * Optionally, the Text::Diff and Memory::Usage modules for Perl
+ (https://cpan.org). These modules enable PSPP to test its Perl
+ module more thoroughly.
- * libncurses (http://www.gnu.org/software/ncurses/). Without it,
- PSPP will assume it is running in an 80x25 terminal.
+Other optional packages:
* libreadline and libhistory
(http://tiswww.case.edu/php/chet/readline/rltop.html). Without
later. Installing Texinfo will allow you to build PSPP
documentation in PostScript or PDF format.
- * libpq, from Postgresql (http://postgresql.org). This enables PSPP
- to read Postgresql databases.
+ * libpq, from Postgresql (http://postgresql.org). This enables PSPP
+ to read Postgresql databases. The tests for the Postgresql
+ interface, but not the Postgresql interface itself, requires the
+ Postgresql server to be installed.
Basic Installation
==================
-These are installation instructions specific to PSPP (including PSPPIRE,
+These are installation instructions specific to PSPP (including PSPPIRE,
the graphic user interface). These instructions contain the
information most commonly needed by people wishing to build the
program from source. More detailed information can be found in the
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
+ You may invoke `configure' with --help to see what options are
+ available. The most common of these are listed under "Optional
+ Features", below.
+
+ It is best to build and install PSPP in directories whose names do
+ not contain unusual characters such as spaces or single-quotes, due
+ to limitations of the tools involved in the build process.
+
+ If you installed some of the libraries that PSPP uses in a
+ non-standard location (on many systems, anywhere other than
+ /usr), you may need to provide some special flags to `configure'
+ to tell it where to find them. For example, on GNU/Linux, if you
+ installed some libraries in /usr/local, then you need to invoke
+ it with at least the following options:
+
+ ./configure LDFLAGS='-L/usr/local/lib -Wl,-rpath,/usr/local/lib' CPPFLAGS='-I/usr/local/include'
+
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
4. Type `make install' to install the programs and any data files
and documentation. Ordinarily you will need root permissions to
- do this; if you cannot get root permissions, see "Installation
- Names", below.
+ do this. The "su" and "sudo" commands are common ways to obtain
+ root permissions. If you cannot get root permissions, see
+ "Installation Names", below.
+
+ Please note: The `make install' target does NOT install the perl
+ module (see below). To install the perl module, you must change to
+ the `perl-module' directory and manually run `make install' there.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- See "Defining Variables", below, for more details.
+ ./configure CC=c89 CFLAGS=-O0 LIBS=-lposix
+
+Cross Compiling
+===============
+
+To cross-compile PSPP, you will likely need to set the
+PKG_CONFIG_LIBDIR environment variable to point to an
+appropriate pkg-config for the cross-compilation environment.
+
+Part of cross-compiling procedure builds a native binary. Therefore, you
+will need not only the dependent libraries for your target, but also for the
+build machine. This is because the native version is used to create
+examples for the user manual.
+
+To do a windows cross compilation on a debian build machine, the mingw64
+cross build system can be used. First you have to install the build
+dependencies with
+
+sudo apt install -y build-essential python3 perl texinfo texlive \
+ libgsl-dev libgtk-3-dev libgtksourceview-3.0-dev \
+ pkg-config gperf git zip curl autoconf libtool \
+ gettext libreadline-dev appstream \
+ mingw-w64 meson ninja-build \
+ imagemagick wget nsis texlive-plain-generic
+
+To build windows 64bit installers from the latest nightly do the following steps
+
+mkdir sandbox
+sandboxdir=`pwd`/sandbox
+curl -o pspp.tgz https://benpfaff.org/~blp/pspp-master/latest-source.tar.gz
+tar -xzf pspp.tgz
+./pspp-<version>/Windows/build-dependencies --arch=x86_64-w64-mingw32 --sandbox=$sandboxdir
+mkdir build
+cd build
+../pspp-<version>/configure --host="x86_64-w64-mingw32" \
+ CPPFLAGS="-I$sandboxdir/Install/include" \
+ LDFLAGS="-L$sandboxdir/Install/lib" \
+ PKG_CONFIG_LIBDIR="$sandboxdir/Install/lib/pkgconfig" \
+ --prefix=$sandboxdir/psppinst \
+ --enable-relocatable
+make -j4
+make install
+make install-html
+make install-pdf
+make Windows/installers
+
+The windows installers are then available in the build/Windows directory. Note that
+building via mingw64-configure/make does not work because some example outputs for the
+documentation are created during the build process. That requires a native version also
+during the cross compile build which does not work with mingw64-configure.
+
+See "Defining Variables", below, for more details.
Installation Names
==================
You can cause programs to be installed with an extra prefix or
suffix on their names by giving `configure' the option
-`--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+`--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
-`--without-libplot'
- Don't compile in support for charts (using libplot). This is
- useful if your system doesn't have the libplot library.
-
`--without-gui'
Don't build the PSPPIRE gui. Use this option if you only want to
build the command line version of PSPP.
-`--with-gui-tools'
- Build the gui developer tools. There is no reason to use this
- option unless you're involved with the development of PSPP
-
`--without-lib{xx}'
Optional libraries should normally be detected and the relevant
functionality will be built they exist. However, on some poorly
In these cases you can use --without-lib{xx} to force configure
to disregard it.
+`--without-perl-module'
+ Disable building the Perl module, in case it does not build properly
+ or you do not need it.
+
+`--enable-relocatable'
+ This option is useful for building a package which can be installed
+ into an arbitrary directory and freely copied to any other directory.
+ If you use this option, you will probably want to install the pspp
+ with a command similar to "make install DESTDIR=<destination>".
+
Defining Variables
==================
`configure --help' for more details.
----------------------------------------------------------------------
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2007 Free
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2007, 2013 Free
Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
projects / pspp / blobdiff