-Installation Instructions
-*************************
+Installation Instructions for GNU pspp
+**************************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2007 Free
-Software Foundation, Inc.
+These instructions are based on the generic GNU installation
+instructions, but they have been tailored for PSPP.
+
+Overview
+========
+
+PSPP uses the standard GNU configuration system. Therefore, if all is well,
+the following simple procedure should work, even on non-GNU systems:
+
+ tar -xzf pspp-*.tar.gz
+ cd pspp-*
+ ./configure
+ make
+ sudo make install
+
+Obviously, you should replace 'pspp-*' in the above, with the name of
+the tarball you are installing. If any part of this process fails, then
+it's likely that one or more of the necessary prerequisites is missing
+from your system. Read on to find out how to correct this.
+
+Before You Install
+==================
+
+Before you install PSPP, you will need to install certain prerequisite
+packages. You may also want to install other packages that enable
+additional functionality in PSPP.
+
+If you do not know whether you have these installed already, you may
+proceed to "Basic Installation", below. The PSPP configuration
+process will notify you about required and optional packages that are
+not present on your system.
+
+The following packages are required to install PSPP:
+
+ * An ANSI C compiler and tool chain. On Unix-like systems, we
+ recommend GCC, but any modern compilation environment should
+ work. On Microsoft Windows, Cygwin (http://www.cygwin.com/) and
+ MinGW (http://www.mingw.org/) are known to work.
+
+ * The GNU Scientific Library (http://www.gnu.org/software/gsl/),
+ version 1.8 or later, including libgslcblas included with GSL.
+
+ * Perl (http://www.perl.org/), version 5.005_03 or later. Perl is
+ required during build but not after installation.
+
+ * iconv, which should be installed as part of a Unix-like system.
+ If you don't have a version already, you can install GNU
+ libiconv (http://www.gnu.org/software/libiconv/).
+
+ * libintl, from GNU gettext (http://ww.gnu.org/software/gettext).
+ GNU libc includes an integrated libintl, so there is no need to
+ separately install libintl on a GNU/Linux system.
+
+The following packages are required to enable PSPP's graphing
+features. If you cannot arrange to install them, you must run
+`configure' with --without-cairo.
+
+ * Cairo (http://cairographics.org/), version 1.5 or later.
+
+ * Pango (http://www.pango.org/), version 1.22 or later.
+
+The following packages are required to enable PSPPIRE, the graphical
+user interface for PSPP. If you cannot install them or do not wish to
+use the GUI, you must run `configure' with --without-gui.
+
+ * pkg-config (http://pkg-config.freedesktop.org/wiki/). Versions
+ 0.18 and 0.19 have a bug that will prevent library detection,
+ but other versions should be fine.
+
+ * GTK+ (http://www.gtk.org/), version 2.12.0 or later.
+
+ * GtkSourceView (http://projects.gnome.org/gtksourceview/)
+ version 2.2 or later.
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+
+Installing the following packages will allow your PSPP binary to read
+Gnumeric files.
+
+ * zlib (http://www.zlib.net/).
+
+ * libxml2 (http://xmlsoft.org/).
+
+Installing the following packages will allow your PSPP binary to write
+OpenDocument text (ODT) files:
+
+ * libxml2 (http://xmlsoft.org/).
+
+The following packages are optional.
+
+ * libncurses (http://www.gnu.org/software/ncurses/). Without it,
+ PSPP will assume it is running in an 80x25 terminal.
+
+ * libreadline and libhistory
+ (http://tiswww.case.edu/php/chet/readline/rltop.html). Without
+ them, interactive command editing and history features in the
+ text-based user interface will be disabled.
+
+ * Texinfo (http://www.gnu.org/software/texinfo/), version 4.7 or
+ later. Installing Texinfo will allow you to build PSPP
+ documentation in PostScript or PDF format.
+
+ * libpq, from Postgresql (http://postgresql.org). This enables PSPP
+ to read Postgresql databases. The tests for the Postgresql
+ interface, but not the Postgresql interface itself, requires the
+ Postgresql server to be installed.
+
+ * The Text::Diff module for Perl (http://cpan.org). This enables
+ PSPP to test the Perl module more thoroughly. It is not needed
+ to build or use the Perl module.
Basic Installation
==================
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation.
+ If you need to do unusual things to compile the package, please
+report the problem to bug-gnu-pspp@gnu.org. We will try to figure out
+how `configure' could work better in your situation for the next
+release.
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to pspp-dev@gnu.org so they can
-be considered for the next release.
+ The simplest way to compile PSPP is:
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
-The simplest way to compile PSPP is:
+ You may invoke `configure' with --help to see what options are
+ available. The most common of these are listed under "Optional
+ Features", below.
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
+ It is best to build and install PSPP in directories whose names do
+ not contain unusual characters such as spaces or single-quotes, due
+ to limitations of the tools involved in the build process.
+
+ If you installed some of the libraries that PSPP uses in a
+ non-standard location (on many systems, anywhere other than
+ /usr), you may need to provide some special flags to `configure'
+ to tell it where to find them. For example, on GNU/Linux, if you
+ installed some libraries in /usr/local, then you need to invoke
+ it with at least the following options:
+
+ ./configure LDFLAGS='-L/usr/local/lib -Wl,-rpath,/usr/local/lib' CPPFLAGS='-I/usr/local/include'
Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
+ If `configure' completes successfully, it prints the message
+ "PSPP configured successfully." at the end of its run.
+ Otherwise, it may stop with a list of packages that you must
+ install before PSPP. If it does, you need to install those
+ packages, then re-run this step. Some prerequisites may be
+ omitted by passing a --without-<feature> flag to `configure' (see
+ "Optional Features", below). If you use one of these flags, then
+ the feature that it disables will not be available in your PSPP
+ installation.
+
+ `configure' may also print a list of packages that you should
+ consider installing. If you install them, then re-run
+ `configure', additional features will be available in your PSPP
+ installation.
+
2. Type `make' to compile the package.
- 3. Optionally, type `make check' to run the self-tests that come with
- the package.
+ 3. Optionally, type `make check' to run the self-tests that come
+ with the package. If any of the self-tests fail, please mail
+ bug-gnu-pspp@gnu.org with the details, to give the PSPP
+ developers an opportunity to fix the problem in the next release.
- 4. Type `make install' to install the programs and any data files and
- documentation. You will need root permissions to do this.
+ 4. Type `make install' to install the programs and any data files
+ and documentation. Ordinarily you will need root permissions to
+ do this. The "su" and "sudo" commands are common ways to obtain
+ root permissions. If you cannot get root permissions, see
+ "Installation Names", below.
+
+ Please note: The `make install' target does NOT install the perl
+ module (see below). To install the perl module, you must change to
+ the `perl-module' directory and manually run `make install' there.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
- *Note Defining Variables::, for more details.
+To cross-compile PSPP, you will likely need to set the
+PKG_CONFIG_LIBDIR environment variable to point to an
+appropriate pkg-config for the cross-compilation environment.
+See "Defining Variables", below, for more details.
Installation Names
==================
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
+ You may wish to install PSPP on a machine where you do not have
+root permissions. To do so, specify a prefix relative within your
+home directory, e.g. `--prefix=$HOME' or `--prefix=$HOME/inst'. All
+PSPP files will be installed under the prefix directory, which `make
+install' will create if necessary. You may run PSPP directly from the
+`bin' directory under the prefix directory as, e.g., `~/inst/bin/pspp'
+under most shells, or for added convenience you can add the
+installation directory to your PATH by editing a shell startup file
+such as `.bashrc'.
+
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
Optional Features
=================
-`--without-libplot'
- Don't compile in support for charts (using libplot). This is
- useful if your system doesn't have the libplot library.
+`--without-cairo'
+ Don't compile in support for charts (using Cairo and Pango). This
+ is useful if your system lacks these libraries.
`--without-gui'
Don't build the PSPPIRE gui. Use this option if you only want to
build the command line version of PSPP.
+ Cairo and Pango required to build the GUI, so --without-cairo
+ implies --without-gui.
+
`--with-gui-tools'
Build the gui developer tools. There is no reason to use this
option unless you're involved with the development of PSPP
+`--without-lib{xx}'
+ Optional libraries should normally be detected and the relevant
+ functionality will be built they exist. However, on some poorly
+ configured systems a library may exist, but be totally broken.
+ In these cases you can use --without-lib{xx} to force configure
+ to disregard it.
+
+`--without-perl-module'
+ Disable building the Perl module, in case it does not build properly
+ or you do not need it.
+
+`--enable-anachronistic-dependencies'
+ If you use this option, some of the checks for dependent libraries
+ will be relaxed, permitting configure to succeed when older versions
+ of libraries are detected. Use of this option is not recommended.
+ If you use it, some features may be missing and the build may fail
+ with obscure error messages.
+
+`--enable-relocatable'
+ This option is useful for building a package which can be installed
+ into an arbitrary directory and freely copied to any other directory.
+ If you use this option, you will probably want to install the pspp
+ with a command similar to "make install DESTDIR=<distination>".
Defining Variables
==================
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script). Here is a another example:
+overridden in the site shell script). Here is another example:
/bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
+----------------------------------------------------------------------
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2007 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
projects / pspp / blobdiff