# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 1995-1997, 2000-2002 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU General Public
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
MKINSTALLDIRS = @MKINSTALLDIRS@
-mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
+mkinstalldirs = $(SHELL) `case "$(MKINSTALLDIRS)" in /*) echo "$(MKINSTALLDIRS)" ;; *) echo "$(top_builddir)/$(MKINSTALLDIRS)" ;; esac`
GMSGFMT = @GMSGFMT@
MSGFMT = @MSGFMT@
GMOFILES = @GMOFILES@
UPDATEPOFILES = @UPDATEPOFILES@
DUMMYPOFILES = @DUMMYPOFILES@
-DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+DISTFILES.common = Makefile.in.in Makevars remove-potcdate.sin \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
+DISTFILES = $(DISTFILES.common) POTFILES.in $(DOMAIN).pot \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
all: all-@USE_NLS@
-all-yes: stamp-po
+all-yes: $(CATALOGS)
all-no:
-# stamp-po is a timestamp denoting the last time at which the CATALOGS have
-# been loosely updated. Its purpose is that when a developer or translator
-# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
-# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
-# invocations of "make" will do nothing. This timestamp would not be necessary
-# if updating the $(CATALOGS) would always touch them; however, the rule for
-# $(POFILES) has been designed to not touch files that don't need to be
-# changed.
-stamp-po: $(srcdir)/$(DOMAIN).pot
- test -z "$(CATALOGS)" || $(MAKE) $(CATALOGS)
- @echo "touch stamp-po"
- @echo timestamp > stamp-poT
- @mv stamp-poT stamp-po
-
# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
# have been downloaded.
-# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
-# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
--add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
--files-from=$(srcdir)/POTFILES.in \
- --copyright-holder='$(COPYRIGHT_HOLDER)' \
- --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
+ --copyright-holder='$(COPYRIGHT_HOLDER)'
test ! -f $(DOMAIN).po || { \
if test -f $(srcdir)/$(DOMAIN).pot; then \
sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
fi; \
}
-# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
-# every "make" invocation, only create it when it is missing.
-# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
$(srcdir)/$(DOMAIN).pot:
$(MAKE) $(DOMAIN).pot-update
-# This target rebuilds a PO file if $(DOMAIN).pot has changed.
-# Note that a PO file is not touched if it doesn't need to be changed.
$(POFILES): $(srcdir)/$(DOMAIN).pot
@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
install: install-exec install-data
install-exec:
install-data: install-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
+ if test "$(PACKAGE)" = "gettext"; then \
$(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
- for file in $(DISTFILES.common) Makevars.template; do \
+ for file in $(DISTFILES.common); do \
$(INSTALL_DATA) $(srcdir)/$$file \
$(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
- for file in Makevars; do \
- rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
- done; \
else \
: ; \
fi
installdirs: installdirs-exec installdirs-data
installdirs-exec:
installdirs-data: installdirs-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
+ if test "$(PACKAGE)" = "gettext"; then \
$(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
else \
: ; \
uninstall: uninstall-exec uninstall-data
uninstall-exec:
uninstall-data: uninstall-data-@USE_NLS@
- if test "$(PACKAGE)" = "gettext-tools"; then \
- for file in $(DISTFILES.common) Makevars.template; do \
+ if test "$(PACKAGE)" = "gettext"; then \
+ for file in $(DISTFILES.common); do \
rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
done; \
else \
check: all
-info dvi ps pdf html tags TAGS ctags CTAGS ID:
+dvi info tags TAGS ID:
mostlyclean:
rm -f remove-potcdate.sed
- rm -f stamp-poT
rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
rm -fr *.o
maintainer-clean: distclean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
- rm -f stamp-po $(GMOFILES)
+ rm -f $(GMOFILES)
distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
dist distdir:
# This is a separate target because 'update-po' must be executed before.
dist2: $(DISTFILES)
dists="$(DISTFILES)"; \
- if test "$(PACKAGE)" = "gettext-tools"; then \
- dists="$$dists Makevars.template"; \
- fi; \
- if test -f $(srcdir)/ChangeLog; then \
- dists="$$dists ChangeLog"; \
- fi; \
- for i in 0 1 2 3 4 5 6 7 8 9; do \
- if test -f $(srcdir)/ChangeLog.$$i; then \
- dists="$$dists ChangeLog.$$i"; \
- fi; \
- done; \
+ if test -f $(srcdir)/ChangeLog; then dists="$$dists ChangeLog"; fi; \
if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
for file in $$dists; do \
if test -f $$file; then \
update-po: Makefile
$(MAKE) $(DOMAIN).pot-update
- test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) $(UPDATEPOFILES)
$(MAKE) update-gmo
# General rule for updating PO files.
.nop.po-update:
@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
- if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; fi; \
tmpdir=`pwd`; \
echo "$$lang:"; \
test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
update-gmo: Makefile $(GMOFILES)
@:
-Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
+Makefile: Makefile.in.in $(top_builddir)/config.status POTFILES.in
cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
$(SHELL) ./config.status
projects / pspp-builds.git / blobdiff