+++ /dev/null
-dnl PSPP - a program for statistical analysis.
-dnl Copyright (C) 2017, 2019 Free Software Foundation, Inc.
-dnl
-dnl This program is free software: you can redistribute it and/or modify
-dnl it under the terms of the GNU General Public License as published by
-dnl the Free Software Foundation, either version 3 of the License, or
-dnl (at your option) any later version.
-dnl
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
-dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-dnl GNU General Public License for more details.
-dnl
-dnl You should have received a copy of the GNU General Public License
-dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
-dnl
-AT_BANNER([EXAMINE])
-
-AT_SETUP([EXAMINE])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [
-DATA LIST LIST /QUALITY * W * BRAND * .
-BEGIN DATA
-3 1 1
-2 2 1
-1 2 1
-1 1 1
-4 1 1
-4 1 1
-5 1 2
-2 1 2
-4 4 2
-2 1 2
-3 1 2
-7 1 3
-4 2 3
-5 3 3
-3 1 3
-6 1 3
-END DATA
-
-WEIGHT BY w.
-
-VARIABLE LABELS brand 'Manufacturer'.
-VARIABLE LABELS quality 'Breaking Strain'.
-
-VALUE LABELS /brand 1 'Aspeger' 2 'Bloggs' 3 'Charlies'.
-
-LIST /FORMAT=NUMBERED.
-
-EXAMINE
- quality BY brand
- /STATISTICS descriptives extreme(3)
- .
-])
-
-
-dnl In the following data, only the extreme values have been checked.
-dnl The descriptives have been blindly pasted.
-AT_CHECK([pspp -O format=csv examine.sps], [0], [dnl
-Table: Reading free-form data from INLINE.
-Variable,Format
-QUALITY,F8.0
-W,F8.0
-BRAND,F8.0
-
-Table: Data List
-Case Number,QUALITY,W,BRAND
-1,3.00,1.00,1.00
-2,2.00,2.00,1.00
-3,1.00,2.00,1.00
-4,1.00,1.00,1.00
-5,4.00,1.00,1.00
-6,4.00,1.00,1.00
-7,5.00,1.00,2.00
-8,2.00,1.00,2.00
-9,4.00,4.00,2.00
-10,2.00,1.00,2.00
-11,3.00,1.00,2.00
-12,7.00,1.00,3.00
-13,4.00,2.00,3.00
-14,5.00,3.00,3.00
-15,3.00,1.00,3.00
-16,6.00,1.00,3.00
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-Breaking Strain,24.00,100.0%,.00,.0%,24.00,100.0%
-
-Table: Extreme Values
-,,,Case Number,Value
-Breaking Strain,Highest,1,12,7.00
-,,2,16,6.00
-,,3,14,5.00
-,Lowest,1,3,1.00
-,,2,4,1.00
-,,3,2,2.00
-
-Table: Descriptives
-,,,Statistic,Std. Error
-Breaking Strain,Mean,,3.54,.32
-,95% Confidence Interval for Mean,Lower Bound,2.87,
-,,Upper Bound,4.21,
-,5% Trimmed Mean,,3.50,
-,Median,,4.00,
-,Variance,,2.52,
-,Std. Deviation,,1.59,
-,Minimum,,1.00,
-,Maximum,,7.00,
-,Range,,6.00,
-,Interquartile Range,,2.75,
-,Skewness,,.06,.47
-,Kurtosis,,-.36,.92
-
-Table: Case Processing Summary
-,Manufacturer,Cases,,,,,
-,,Valid,,Missing,,Total,
-,,N,Percent,N,Percent,N,Percent
-Breaking Strain,Aspeger,8.00,100.0%,.00,.0%,8.00,100.0%
-,Bloggs,8.00,100.0%,.00,.0%,8.00,100.0%
-,Charlies,8.00,100.0%,.00,.0%,8.00,100.0%
-
-Table: Extreme Values
-,Manufacturer,,,Case Number,Value
-Breaking Strain,Aspeger,Highest,1,6,4.00
-,,,2,5,4.00
-,,,3,1,3.00
-,,Lowest,1,3,1.00
-,,,2,4,1.00
-,,,3,2,2.00
-,Bloggs,Highest,1,7,5.00
-,,,2,9,4.00
-,,,3,11,3.00
-,,Lowest,1,8,2.00
-,,,2,10,2.00
-,,,3,11,3.00
-,Charlies,Highest,1,12,7.00
-,,,2,16,6.00
-,,,3,14,5.00
-,,Lowest,1,15,3.00
-,,,2,13,4.00
-,,,3,14,5.00
-
-Table: Descriptives
-,Manufacturer,,,Statistic,Std. Error
-Breaking Strain,Aspeger,Mean,,2.25,.45
-,,95% Confidence Interval for Mean,Lower Bound,1.18,
-,,,Upper Bound,3.32,
-,,5% Trimmed Mean,,2.22,
-,,Median,,2.00,
-,,Variance,,1.64,
-,,Std. Deviation,,1.28,
-,,Minimum,,1.00,
-,,Maximum,,4.00,
-,,Range,,3.00,
-,,Interquartile Range,,2.75,
-,,Skewness,,.47,.75
-,,Kurtosis,,-1.55,1.48
-,Bloggs,Mean,,3.50,.38
-,,95% Confidence Interval for Mean,Lower Bound,2.61,
-,,,Upper Bound,4.39,
-,,5% Trimmed Mean,,3.50,
-,,Median,,4.00,
-,,Variance,,1.14,
-,,Std. Deviation,,1.07,
-,,Minimum,,2.00,
-,,Maximum,,5.00,
-,,Range,,3.00,
-,,Interquartile Range,,1.75,
-,,Skewness,,-.47,.75
-,,Kurtosis,,-.83,1.48
-,Charlies,Mean,,4.88,.44
-,,95% Confidence Interval for Mean,Lower Bound,3.83,
-,,,Upper Bound,5.92,
-,,5% Trimmed Mean,,4.86,
-,,Median,,5.00,
-,,Variance,,1.55,
-,,Std. Deviation,,1.25,
-,,Minimum,,3.00,
-,,Maximum,,7.00,
-,,Range,,4.00,
-,,Interquartile Range,,1.75,
-,,Skewness,,.30,.75
-,,Kurtosis,,.15,1.48
-])
-
-AT_CLEANUP
-
-AT_SETUP([EXAMINE -- extremes])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-data list free /V1 W
-begin data.
-1 1
-2 1
-3 2
-3 1
-4 1
-5 1
-6 1
-7 1
-8 1
-9 1
-10 1
-11 1
-12 1
-13 1
-14 1
-15 1
-16 1
-17 1
-18 2
-19 1
-20 1
-end data.
-
-weight by w.
-
-examine v1
- /statistics=extreme(6)
- .
-])
-
-AT_CHECK([pspp -O format=csv examine.sps], [0],[dnl
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-V1,23.00,100.0%,.00,.0%,23.00,100.0%
-
-Table: Extreme Values
-,,,Case Number,Value
-V1,Highest,1,21,20.00
-,,2,20,19.00
-,,3,19,18.00
-,,4,18,17.00
-,,5,17,16.00
-,,6,16,15.00
-,Lowest,1,1,1.00
-,,2,2,2.00
-,,3,3,3.00
-,,4,4,3.00
-,,5,5,4.00
-,,6,6,5.00
-])
-
-AT_CLEANUP
-
-
-AT_SETUP([EXAMINE -- extremes with fractional weights])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([extreme.sps], [dnl
-set format=F20.3.
-data list notable list /w * x *.
-begin data.
- 0.88 300000
- 0.86 320000
- 0.98 480000
- 0.93 960000
- 1.35 960000
- 1.31 960000
- 0.88 960000
- 0.88 1080000
- 0.88 1080000
- 0.95 1200000
- 1.47 1200000
- 0.93 1200000
- 0.98 1320000
- 1.31 1380000
- 0.93 1440000
- 0.88 1560000
- 1.56 1560000
- 1.47 1560000
-end data.
-
-weight by w.
-
-
-EXAMINE
- x
- /STATISTICS = DESCRIPTIVES EXTREME (5)
- .
-])
-
-AT_CHECK([pspp -O format=csv extreme.sps], [0], [dnl
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-x,19.430,100.0%,.000,.0%,19.430,100.0%
-
-Table: Extreme Values
-,,,Case Number,Value
-x,Highest,1,18,1560000.000
-,,2,17,1560000.000
-,,3,16,1560000.000
-,,4,15,1440000.000
-,,5,14,1380000.000
-,Lowest,1,1,300000.000
-,,2,2,320000.000
-,,3,3,480000.000
-,,4,4,960000.000
-,,5,5,960000.000
-
-Table: Descriptives
-,,,Statistic,Std. Error
-x,Mean,,1120010.293,86222.178
-,95% Confidence Interval for Mean,Lower Bound,939166.693,
-,,Upper Bound,1300853.894,
-,5% Trimmed Mean,,1141017.899,
-,Median,,1200000.000,
-,Variance,,144447748124.869,
-,Std. Deviation,,380062.821,
-,Minimum,,300000.000,
-,Maximum,,1560000.000,
-,Range,,1260000.000,
-,Interquartile Range,,467258.065,
-,Skewness,,-.887,.519
-,Kurtosis,,.340,1.005
-])
-
-AT_CLEANUP
-
-dnl Test the PERCENTILES subcommand of the EXAMINE command.
-dnl In particular test that it behaves properly when there are only
-dnl a few cases.
-AT_SETUP([EXAMINE -- percentiles])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-DATA LIST LIST /X *.
-BEGIN DATA.
-2.00
-8.00
-5.00
-END DATA.
-
-EXAMINE /x
- /PERCENTILES=HAVERAGE.
-
-EXAMINE /x
- /PERCENTILES=WAVERAGE.
-
-EXAMINE /x
- /PERCENTILES=ROUND.
-
-EXAMINE /x
- /PERCENTILES=EMPIRICAL.
-
-EXAMINE /x
- /PERCENTILES=AEMPIRICAL.
-])
-AT_CHECK([pspp -o pspp.csv -o pspp.txt examine.sps])
-AT_CHECK([cat pspp.csv], [0], [dnl
-Table: Reading free-form data from INLINE.
-Variable,Format
-X,F8.0
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-X,3,100.0%,0,.0%,3,100.0%
-
-Table: Percentiles
-,,Percentiles,,,,,,
-,,5,10,25,50,75,90,95
-X,Weighted Average,.40,.80,2.00,5.00,8.00,8.00,8.00
-,Tukey's Hinges,,,3.50,5.00,6.50,,
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-X,3,100.0%,0,.0%,3,100.0%
-
-Table: Percentiles
-,,Percentiles,,,,,,
-,,5,10,25,50,75,90,95
-X,Weighted Average,.30,.60,1.50,3.50,5.75,7.10,7.55
-,Tukey's Hinges,,,3.50,5.00,6.50,,
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-X,3,100.0%,0,.0%,3,100.0%
-
-Table: Percentiles
-,,Percentiles,,,,,,
-,,5,10,25,50,75,90,95
-X,Weighted Average,.00,.00,2.00,5.00,5.00,8.00,8.00
-,Tukey's Hinges,,,3.50,5.00,6.50,,
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-X,3,100.0%,0,.0%,3,100.0%
-
-Table: Percentiles
-,,Percentiles,,,,,,
-,,5,10,25,50,75,90,95
-X,Weighted Average,2.00,2.00,2.00,5.00,8.00,8.00,8.00
-,Tukey's Hinges,,,3.50,5.00,6.50,,
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-X,3,100.0%,0,.0%,3,100.0%
-
-Table: Percentiles
-,,Percentiles,,,,,,
-,,5,10,25,50,75,90,95
-X,Weighted Average,2.00,2.00,2.00,5.00,8.00,8.00,8.00
-,Tukey's Hinges,,,3.50,5.00,6.50,,
-])
-AT_CLEANUP
-
-AT_SETUP([EXAMINE -- missing values])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-DATA LIST LIST /x * y *.
-BEGIN DATA.
-1 1
-2 1
-3 1
-4 1
-5 2
-6 2
-. 2
-END DATA
-
-EXAMINE /x by y
- /MISSING = PAIRWISE
- .
-])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-AT_CHECK([cat pspp.csv], [0], [dnl
-Table: Reading free-form data from INLINE.
-Variable,Format
-x,F8.0
-y,F8.0
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-x,6,85.7%,1,14.3%,7,100.0%
-
-Table: Case Processing Summary
-,y,Cases,,,,,
-,,Valid,,Missing,,Total,
-,,N,Percent,N,Percent,N,Percent
-x,1.00,4,100.0%,0,.0%,4,100.0%
-,2.00,2,66.7%,1,33.3%,3,100.0%
-])
-AT_CLEANUP
-
-
-AT_SETUP([EXAMINE -- user missing values])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine-m.sps], [dnl
-DATA LIST notable LIST /x * y *.
-BEGIN DATA.
-1 2
-9999999999 2
-9999999999 99
-END DATA.
-
-MISSING VALUES x (9999999999).
-MISSING VALUES y (99).
-
-EXAMINE
- /VARIABLES= x y
- /MISSING=PAIRWISE.
-])
-AT_CHECK([pspp -O format=csv examine-m.sps], [0], [dnl
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-x,1,33.3%,2,66.7%,3,100.0%
-y,2,66.7%,1,33.3%,3,100.0%
-])
-AT_CLEANUP
-
-AT_SETUP([EXAMINE -- missing values and percentiles])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-DATA LIST LIST /X *.
-BEGIN DATA.
-99
-99
-5.00
-END DATA.
-
-MISSING VALUE X (99).
-
-EXAMINE /x
- /PERCENTILES=HAVERAGE.
-])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-dnl Ignore output -- this is just a no-crash check.
-AT_CLEANUP
-
-dnl Tests the trimmed mean calculation in the case
-dnl where the data is weighted towards the centre.
-AT_SETUP([EXAMINE -- trimmed mean])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-DATA LIST LIST /X * C *.
-BEGIN DATA.
-1 1
-2 49
-3 2
-END DATA.
-
-WEIGHT BY c.
-
-EXAMINE
- x
- /STATISTICS=DESCRIPTIVES
- .
-])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-AT_CHECK([cat pspp.csv], [0], [dnl
-Table: Reading free-form data from INLINE.
-Variable,Format
-X,F8.0
-C,F8.0
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-X,52.00,100.0%,.00,.0%,52.00,100.0%
-
-Table: Descriptives
-,,,Statistic,Std. Error
-X,Mean,,2.02,.03
-,95% Confidence Interval for Mean,Lower Bound,1.95,
-,,Upper Bound,2.09,
-,5% Trimmed Mean,,2.00,
-,Median,,2.00,
-,Variance,,.06,
-,Std. Deviation,,.24,
-,Minimum,,1.00,
-,Maximum,,3.00,
-,Range,,2.00,
-,Interquartile Range,,.00,
-,Skewness,,1.19,.33
-,Kurtosis,,15.73,.65
-])
-AT_CLEANUP
-
-AT_SETUP([EXAMINE -- crash bug])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-data list list /a * x * y *.
-begin data.
-3 1 3
-5 1 4
-7 2 3
-end data.
-
-examine a by x by y
- /statistics=DESCRIPTIVES
- .
-])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-dnl Ignore output -- this is just a no-crash check.
-AT_CLEANUP
-
-dnl Test that two consecutive EXAMINE commands don't crash PSPP.
-AT_SETUP([EXAMINE -- consecutive runs don't crash])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-data list list /y * z *.
-begin data.
-6 4
-5 3
-7 6
-end data.
-
-EXAMINE /VARIABLES= z BY y.
-
-EXAMINE /VARIABLES= z.
-])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-dnl Ignore output -- this is just a no-crash check.
-AT_CLEANUP
-
-dnl Test that /DESCRIPTIVES does not crash in presence of missing values.
-AT_SETUP([EXAMINE -- missing values don't crash])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-data list list /x * y *.
-begin data.
-1 0
-2 0
-. 0
-3 1
-4 1
-end data.
-examine x by y /statistics=descriptives.
-])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-dnl Ignore output -- this is just a no-crash check.
-AT_CLEANUP
-
-dnl Test that having only a single case doesn't crash.
-AT_SETUP([EXAMINE -- single case doesn't crash])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-DATA LIST LIST /quality * .
-BEGIN DATA
-3
-END DATA
-
-
-EXAMINE
- quality
- /STATISTICS descriptives
- /PLOT = histogram
- .
-])
-AT_CHECK([pspp -o pspp.csv examine.sps], [0], [ignore])
-dnl Ignore output -- this is just a no-crash check.
-AT_CLEANUP
-
-dnl Test that all-missing data doesn't crash.
-AT_SETUP([EXAMINE -- all-missing data doesn't crash])
-AT_KEYWORDS([categorical categoricals])
-AT_DATA([examine.sps], [dnl
-DATA LIST LIST /x *.
-BEGIN DATA.
-.
-.
-.
-.
-END DATA.
-
-EXAMINE /x
- PLOT=HISTOGRAM BOXPLOT NPPLOT SPREADLEVEL(1) ALL
- /ID=x
- /STATISTICS = DESCRIPTIVES EXTREME (5) ALL
- /PERCENTILE=AEMPIRICAL
- .
-])
-AT_CHECK([pspp -o pspp.csv examine.sps], [0], [ignore])
-dnl Ignore output -- this is just a no-crash check.
-AT_CLEANUP
-
-dnl Test that big input doesn't crash (bug 11307).
-AT_SETUP([EXAMINE -- big input doesn't crash])
-AT_KEYWORDS([categorical categoricals slow])
-AT_DATA([examine.sps], [dnl
-INPUT PROGRAM.
- LOOP #I=1 TO 50000.
- COMPUTE X=NORMAL(10).
- END CASE.
- END LOOP.
- END FILE.
-END INPUT PROGRAM.
-
-
-EXAMINE /x
- /STATISTICS=DESCRIPTIVES.
-])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-dnl Ignore output -- this is just a no-crash check.
-AT_CLEANUP
-
-dnl Another test that big input doesn't crash.
-dnl The actual bug that this checks for has been lost.
-AT_SETUP([EXAMINE -- big input doesn't crash 2])
-AT_KEYWORDS([categorical categoricals slow])
-AT_CHECK([$PYTHON3 -c '
-for i in range(100000): print("AB12")
-for i in range(100000): print("AB04")
-' > large.txt])
-AT_DATA([examine.sps], [dnl
-DATA LIST FILE='large.txt' /S 1-2 (A) X 3 .
-
-
-AGGREGATE OUTFILE=* /BREAK=X /A=N.
-
-
-EXAMINE /A BY X.
-])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-dnl Ignore output -- this is just a no-crash check.
-AT_CHECK([$PYTHON3 -c 'for i in range(25000): print("AB04\nAB12")' >> large.txt])
-AT_CHECK([pspp -o pspp.csv examine.sps])
-dnl Ignore output -- this is just a no-crash check.
-AT_CLEANUP
-
-
-dnl Test that the ID command works with non-numberic variables
-AT_SETUP([EXAMINE -- non-numeric ID])
-AT_KEYWORDS([categorical categoricals])
-
-AT_DATA([examine-id.sps], [dnl
-data list notable list /x * y (a12).
-begin data.
-1 one
-2 two
-3 three
-4 four
-5 five
-6 six
-7 seven
-8 eight
-9 nine
-10 ten
-11 eleven
-12 twelve
-30 thirty
-300 threehundred
-end data.
-
-set small=0.
-examine x
- /statistics = extreme
- /id = y
- /plot = boxplot
- .
-])
-
-AT_CHECK([pspp -O format=csv examine-id.sps], [0], [dnl
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-x,14,100.0%,0,.0%,14,100.0%
-
-Table: Extreme Values
-,,,y,Value
-x,Highest,1,threehundred,300.00
-,,2,thirty,30.00
-,,3,twelve,12.00
-,,4,eleven,11.00
-,,5,ten,10.00
-,Lowest,1,one,1.00
-,,2,two,2.00
-,,3,three,3.00
-,,4,four,4.00
-,,5,five,5.00
-
-Table: Tests of Normality
-,Shapiro-Wilk,,
-,Statistic,df,Sig.
-x,.37,14,.00
-])
-
-AT_CLEANUP
-
-dnl Test for a crash which happened on cleanup from a bad input syntax
-AT_SETUP([EXAMINE -- Bad Input])
-AT_KEYWORDS([categorical categoricals])
-
-AT_DATA([examine-bad.sps], [dnl
-data list list /h * g *.
-begin data.
-1 1
-2 1
-3 1
-4 1
-5 2
-6 2
-7 2
-8 2
-9 2
-end data.
-
-EXAMINE
- /VARIABLES= h
- BY g
- /STATISTICS = DESCRIPTIVES EXTREME
- /PLOT = lkajsdas
- .
-])
-
-AT_CHECK([pspp -o pspp.csv examine-bad.sps], [1], [ignore])
-
-AT_CLEANUP
-
-
-dnl Check the MISSING=REPORT option
-AT_SETUP([EXAMINE -- MISSING=REPORT])
-AT_KEYWORDS([categorical categoricals])
-
-AT_DATA([examine-report.sps], [dnl
-set format = F22.0.
-data list list /x * g *.
-begin data.
-1 1
-2 1
-3 1
-4 1
-5 1
-6 1
-7 1
-8 1
-9 1
-10 2
-20 2
-30 2
-40 2
-50 2
-60 2
-70 2
-80 2
-90 2
-101 9
-201 9
-301 9
-401 9
-501 99
-601 99
-701 99
-801 99
-901 99
-1001 .
-2002 .
-3003 .
-4004 .
-end data.
-
-MISSING VALUES g (9, 99, 999).
-
-EXAMINE
- /VARIABLES = x
- BY g
- /STATISTICS = EXTREME
- /NOTOTAL
- /MISSING = REPORT.
-])
-
-
-AT_CHECK([pspp -o pspp.csv -o pspp.txt examine-report.sps])
-AT_CHECK([cat pspp.csv], [0],
- [[Table: Reading free-form data from INLINE.
-Variable,Format
-x,F8.0
-g,F8.0
-
-Table: Case Processing Summary
-,g,Cases,,,,,
-,,Valid,,Missing,,Total,
-,,N,Percent,N,Percent,N,Percent
-x,.,4,100.0%,0,.0%,4,100.0%
-,1,9,100.0%,0,.0%,9,100.0%
-,2,9,100.0%,0,.0%,9,100.0%
-,9[a],4,100.0%,0,.0%,4,100.0%
-,99[a],5,100.0%,0,.0%,5,100.0%
-Footnote: a. User-missing value.
-
-Table: Extreme Values
-,g,,,Case Number,Value
-x,.,Highest,1,31,4004
-,,,2,30,3003
-,,,3,29,2002
-,,,4,28,1001
-,,,5,0,0
-,,Lowest,1,28,1001
-,,,2,29,2002
-,,,3,30,3003
-,,,4,31,4004
-,,,5,31,4004
-,1,Highest,1,9,9
-,,,2,8,8
-,,,3,7,7
-,,,4,6,6
-,,,5,5,5
-,,Lowest,1,1,1
-,,,2,2,2
-,,,3,3,3
-,,,4,4,4
-,,,5,5,5
-,2,Highest,1,18,90
-,,,2,17,80
-,,,3,16,70
-,,,4,15,60
-,,,5,14,50
-,,Lowest,1,10,10
-,,,2,11,20
-,,,3,12,30
-,,,4,13,40
-,,,5,14,50
-,9[a],Highest,1,22,401
-,,,2,21,301
-,,,3,20,201
-,,,4,19,101
-,,,5,0,0
-,,Lowest,1,19,101
-,,,2,20,201
-,,,3,21,301
-,,,4,22,401
-,,,5,22,401
-,99[a],Highest,1,27,901
-,,,2,26,801
-,,,3,25,701
-,,,4,24,601
-,,,5,23,501
-,,Lowest,1,23,501
-,,,2,24,601
-,,,3,25,701
-,,,4,26,801
-,,,5,27,901
-Footnote: a. User-missing value.
-]])
-
-AT_CLEANUP
-
-
-dnl Run a test of the basic STATISTICS using a "real"
-dnl dataset and comparing with "real" results kindly
-dnl provided by Olaf Nöhring
-AT_SETUP([EXAMINE -- sample unweighted])
-AT_KEYWORDS([categorical categoricals])
-
-AT_DATA([sample.sps], [dnl
-set format = F22.4.
-DATA LIST notable LIST /X *
-BEGIN DATA.
-461.19000000
-466.38000000
-479.46000000
-480.10000000
-483.43000000
-488.30000000
-489.00000000
-491.62000000
-505.62000000
-511.30000000
-521.53000000
-526.70000000
-528.25000000
-538.70000000
-540.22000000
-540.58000000
-546.10000000
-548.17000000
-553.99000000
-566.21000000
-575.90000000
-584.38000000
-593.40000000
-357.05000000
-359.73000000
-360.48000000
-373.98000000
-374.13000000
-381.45000000
-383.72000000
-390.00000000
-400.34000000
-415.32000000
-415.91000000
-418.30000000
-421.03000000
-422.43000000
-426.93000000
-433.25000000
-436.89000000
-445.33000000
-446.33000000
-446.55000000
-456.44000000
-689.49000000
-691.92000000
-695.00000000
-695.36000000
-698.21000000
-699.46000000
-706.61000000
-710.69000000
-715.82000000
-715.82000000
-741.39000000
-752.27000000
-756.73000000
-757.74000000
-759.57000000
-796.07000000
-813.78000000
-817.25000000
-825.48000000
-831.28000000
-849.24000000
-890.00000000
-894.78000000
-935.65000000
-935.90000000
-945.90000000
-1012.8600000
-1022.6000000
-1061.8100000
-1063.5000000
-1077.2300000
-1151.6300000
-1355.2800000
-598.88000000
-606.91000000
-621.60000000
-624.80000000
-636.13000000
-637.38000000
-640.32000000
-649.35000000
-656.51000000
-662.55000000
-664.69000000
-106.22000000
-132.24000000
-174.76000000
-204.85000000
-264.93000000
-264.99000000
-269.84000000
-325.12000000
-331.67000000
-337.26000000
-347.68000000
-354.91000000
-END DATA.
-
-EXAMINE
- x
- /STATISTICS=DESCRIPTIVES
- .
-])
-
-AT_CHECK([pspp -O format=csv sample.sps], [0], [dnl
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-X,100,100.0%,0,.0%,100,100.0%
-
-Table: Descriptives
-,,,Statistic,Std. Error
-X,Mean,,587.6603,23.2665
-,95% Confidence Interval for Mean,Lower Bound,541.4946,
-,,Upper Bound,633.8260,
-,5% Trimmed Mean,,579.7064,
-,Median,,547.1350,
-,Variance,,54132.8466,
-,Std. Deviation,,232.6647,
-,Minimum,,106.2200,
-,Maximum,,1355.2800,
-,Range,,1249.0600,
-,Interquartile Range,,293.1575,
-,Skewness,,.6331,.2414
-,Kurtosis,,.5300,.4783
-])
-
-AT_CLEANUP
-
-
-
-dnl Test for a crash which happened on bad input syntax
-AT_SETUP([EXAMINE -- Empty Parentheses])
-AT_KEYWORDS([categorical categoricals])
-
-AT_DATA([examine-empty-parens.sps], [dnl
-DATA LIST notable LIST /X *
-BEGIN DATA.
-2
-3
-END DATA.
-
-
-EXAMINE
- x
- /PLOT = SPREADLEVEL()
- .
-])
-
-AT_CHECK([pspp -o pspp.csv examine-empty-parens.sps], [1], [ignore])
-
-AT_CLEANUP
-
-
-
-
-dnl Test for another crash which happened on bad input syntax
-AT_SETUP([EXAMINE -- Bad variable])
-AT_KEYWORDS([categorical categoricals])
-
-AT_DATA([examine-bad-variable.sps], [dnl
-data list list /h * g *.
-begin data.
-3 1
-4 1
-5 2
-end data.
-
-EXAMINE
- /VARIABLES/ h
- BY g
- .
-])
-
-AT_CHECK([pspp -o pspp.csv examine-bad-variable.sps], [1], [ignore])
-
-AT_CLEANUP
-
-
-
-dnl Test for yet another crash. This time for extremes vs. missing weight values.\0
-AT_SETUP([EXAMINE -- Extremes vs. Missing Weights])
-AT_KEYWORDS([categorical categoricals])
-
-AT_DATA([examine-missing-weights.sps], [dnl
-data list notable list /h * g *.
-begin data.
-3 1
-4 .
-5 1
-2 1
-end data.
-
-WEIGHT BY g.
-
-EXAMINE h
- /STATISTICS extreme(3)
- .
-])
-
-AT_CHECK([pspp -O format=csv examine-missing-weights.sps], [0], [dnl
-"examine-missing-weights.sps:13: warning: EXAMINE: At least one case in the data file had a weight value that was user-missing, system-missing, zero, or negative. These case(s) were ignored."
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-h,3.00,100.0%,.00,.0%,3.00,100.0%
-
-Table: Extreme Values
-,,,Case Number,Value
-h,Highest,1,3,5.00
-,,2,2,4.00
-,,3,1,3.00
-,Lowest,1,4,2.00
-,,2,1,3.00
-,,3,2,4.00
-])
-
-AT_CLEANUP
-
-dnl This is an example from doc/tutorial.texi
-dnl So if the results of this have to be changed in any way,
-dnl make sure to update that file.
-AT_SETUP([EXAMINE tutorial example 1])
-cp $top_srcdir/examples/repairs.sav .
-AT_DATA([repairs.sps], [dnl
-GET FILE='repairs.sav'.
-EXAMINE mtbf /STATISTICS=DESCRIPTIVES.
-COMPUTE mtbf_ln = LN (mtbf).
-EXAMINE mtbf_ln /STATISTICS=DESCRIPTIVES.
-])
-
-AT_CHECK([pspp -O format=csv repairs.sps], [0], [dnl
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-Mean time between failures (months) ,30,100.0%,0,.0%,30,100.0%
-
-Table: Descriptives
-,,,Statistic,Std. Error
-Mean time between failures (months) ,Mean,,8.78,1.10
-,95% Confidence Interval for Mean,Lower Bound,6.53,
-,,Upper Bound,11.04,
-,5% Trimmed Mean,,8.20,
-,Median,,8.29,
-,Variance,,36.34,
-,Std. Deviation,,6.03,
-,Minimum,,1.63,
-,Maximum,,26.47,
-,Range,,24.84,
-,Interquartile Range,,6.03,
-,Skewness,,1.65,.43
-,Kurtosis,,3.41,.83
-
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-mtbf_ln,30,100.0%,0,.0%,30,100.0%
-
-Table: Descriptives
-,,,Statistic,Std. Error
-mtbf_ln,Mean,,1.95,.13
-,95% Confidence Interval for Mean,Lower Bound,1.69,
-,,Upper Bound,2.22,
-,5% Trimmed Mean,,1.96,
-,Median,,2.11,
-,Variance,,.49,
-,Std. Deviation,,.70,
-,Minimum,,.49,
-,Maximum,,3.28,
-,Range,,2.79,
-,Interquartile Range,,.88,
-,Skewness,,-.37,.43
-,Kurtosis,,.01,.83
-])
-
-AT_CLEANUP
-
-dnl This is an example from doc/tutorial.texi
-dnl So if the results of this have to be changed in any way,
-dnl make sure to update that file.
-AT_SETUP([EXAMINE tutorial example 2])
-cp $top_srcdir/examples/physiology.sav .
-AT_DATA([examine.sps], [dnl
-GET FILE='physiology.sav'.
-EXAMINE height, weight /STATISTICS=EXTREME(3).
-])
-AT_CHECK([pspp -o pspp.csv -o pspp.txt examine.sps])
-AT_CHECK([cat pspp.csv], [0], [dnl
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-Height in millimeters ,40,100.0%,0,.0%,40,100.0%
-Weight in kilograms ,40,100.0%,0,.0%,40,100.0%
-
-Table: Extreme Values
-,,,Case Number,Value
-Height in millimeters ,Highest,1,14,1903
-,,2,15,1884
-,,3,12,1802
-,Lowest,1,30,179
-,,2,31,1598
-,,3,28,1601
-Weight in kilograms ,Highest,1,13,92.1
-,,2,5,92.1
-,,3,17,91.7
-,Lowest,1,38,-55.6
-,,2,39,54.5
-,,3,33,55.4
-])
-AT_CLEANUP
-
-
-
-AT_SETUP([EXAMINE -- Crash on unrepresentable graphs])
-AT_DATA([examine.sps], [dnl
-data list notable list /x * g *.
-begin data.
-96 1
-end data.
-
-examine x by g
- /nototal
- /plot = all.
-])
-dnl This bug only manifested itself on cairo based drivers.
-AT_CHECK([pspp -O format=pdf examine.sps], [0], [ignore], [ignore])
-AT_CLEANUP
-
-
-dnl This example comes from the web site:
-dnl https://www.spsstests.com/2018/11/shapiro-wilk-normality-test-spss.html
-AT_SETUP([EXAMINE -- shapiro-wilk 1])
-AT_KEYWORDS([shapiro wilk])
-AT_DATA([shapiro-wilk.sps], [dnl
-data list notable list /x * g *.
-begin data.
-96 1
-98 1
-95 1
-89 1
-90 1
-92 1
-94 1
-93 1
-97 1
-100 1
-99 2
-96 2
-80 2
-89 2
-91 2
-92 2
-93 2
-94 2
-99 2
-80 2
-end data.
-
-set format F22.3.
-
-examine x by g
- /nototal
- /plot = all.
-])
-
-AT_CHECK([pspp -O format=csv shapiro-wilk.sps], [0],[dnl
-Table: Case Processing Summary
-,g,Cases,,,,,
-,,Valid,,Missing,,Total,
-,,N,Percent,N,Percent,N,Percent
-x,1.00,10,100.0%,0,.0%,10,100.0%
-,2.00,10,100.0%,0,.0%,10,100.0%
-
-Table: Tests of Normality
-,g,Shapiro-Wilk,,
-,,Statistic,df,Sig.
-x,1.00,.984,10,.983
-,2.00,.882,10,.136
-])
-
-AT_CLEANUP
-
-
-dnl This example comes from the web site:
-dnl http://www.real-statistics.com/tests-normality-and-symmetry/statistical-tests-normality-symmetry/shapiro-wilk-expanded-test/
-dnl It uses a dataset larger than 11 samples. Hence the alternative method for
-dnl signficance is used.
-AT_SETUP([EXAMINE -- shapiro-wilk 2])
-AT_KEYWORDS([shapiro wilk])
-AT_DATA([shapiro-wilk2.sps], [dnl
-data list notable list /x *.
-begin data.
-65
-61
-63
-86
-70
-55
-74
-35
-72
-68
-45
-58
-end data.
-
-set format F22.3.
-
-examine x
- /plot = boxplot.
-])
-
-AT_CHECK([pspp -O format=csv shapiro-wilk2.sps], [0],[dnl
-Table: Case Processing Summary
-,Cases,,,,,
-,Valid,,Missing,,Total,
-,N,Percent,N,Percent,N,Percent
-x,12,100.0%,0,.0%,12,100.0%
-
-Table: Tests of Normality
-,Shapiro-Wilk,,
-,Statistic,df,Sig.
-x,.971,12,.922
-])
-
-AT_CLEANUP
-
-AT_SETUP([EXAMINE syntax errors])
-AT_DATA([examine.sps], [dnl
-DATA LIST LIST NOTABLE/x y z.
-EXAMINE VARIABLES **.
-EXAMINE **.
-EXAMINE x BY **.
-EXAMINE x/STATISTICS EXTREME (**).
-EXAMINE x/STATISTICS EXTREME (5 **).
-EXAMINE x/STATISTICS **.
-EXAMINE x/PERCENTILES(111).
-EXAMINE x/PERCENTILES(**).
-EXAMINE x/PERCENTILES **.
-EXAMINE x/MISSING **.
-EXAMINE x/COMPARE **.
-EXAMINE x/PLOT SPREADLEVEL(**).
-EXAMINE x/PLOT SPREADLEVEL(123 **).
-EXAMINE x/PLOT **.
-EXAMINE x/CINTERVAL **.
-EXAMINE x/ **.
-EXAMINE x/TOTAL/NOTOTAL.
-])
-AT_CHECK([pspp -O format=csv examine.sps], [1], [dnl
-"examine.sps:2.19-2.20: error: EXAMINE: Syntax error expecting `='.
- 2 | EXAMINE VARIABLES **.
- | ^~"
-
-"examine.sps:3.9-3.10: error: EXAMINE: Syntax error expecting variable name.
- 3 | EXAMINE **.
- | ^~"
-
-"examine.sps:4.14-4.15: error: EXAMINE: Syntax error expecting one of the following: STATISTICS, PERCENTILES, TOTAL, NOTOTAL, MISSING, COMPARE, PLOT, CINTERVAL, ID.
- 4 | EXAMINE x BY **.
- | ^~"
-
-"examine.sps:5.31-5.32: error: EXAMINE: Syntax error expecting non-negative integer for EXTREME.
- 5 | EXAMINE x/STATISTICS EXTREME (**).
- | ^~"
-
-"examine.sps:6.33-6.34: error: EXAMINE: Syntax error expecting `@:}@'.
- 6 | EXAMINE x/STATISTICS EXTREME (5 **).
- | ^~"
-
-"examine.sps:7.22-7.23: error: EXAMINE: Syntax error expecting DESCRIPTIVES, EXTREME, NONE, or ALL.
- 7 | EXAMINE x/STATISTICS **.
- | ^~"
-
-"examine.sps:8.23-8.25: error: EXAMINE: Syntax error expecting number in (0,100) for PERCENTILES.
- 8 | EXAMINE x/PERCENTILES(111).
- | ^~~"
-
-"examine.sps:9.23-9.24: error: EXAMINE: Syntax error expecting `@:}@'.
- 9 | EXAMINE x/PERCENTILES(**).
- | ^~"
-
-"examine.sps:10.23-10.24: error: EXAMINE: Syntax error expecting HAVERAGE, WAVERAGE, ROUND, EMPIRICAL, AEMPIRICAL, or NONE.
- 10 | EXAMINE x/PERCENTILES **.
- | ^~"
-
-"examine.sps:11.19-11.20: error: EXAMINE: Syntax error expecting LISTWISE, PAIRWISE, EXCLUDE, INCLUDE, REPORT, or NOREPORT.
- 11 | EXAMINE x/MISSING **.
- | ^~"
-
-"examine.sps:12.19-12.20: error: EXAMINE: Syntax error expecting VARIABLES or GROUPS.
- 12 | EXAMINE x/COMPARE **.
- | ^~"
-
-"examine.sps:13.28-13.29: error: EXAMINE: Syntax error expecting number.
- 13 | EXAMINE x/PLOT SPREADLEVEL(**).
- | ^~"
-
-"examine.sps:13.28-13.29: error: EXAMINE: Syntax error expecting BOXPLOT, NPPLOT, HISTOGRAM, SPREADLEVEL, NONE, or ALL.
- 13 | EXAMINE x/PLOT SPREADLEVEL(**).
- | ^~"
-
-"examine.sps:14.32-14.33: error: EXAMINE: Syntax error expecting `@:}@'.
- 14 | EXAMINE x/PLOT SPREADLEVEL(123 **).
- | ^~"
-
-"examine.sps:15.16-15.17: error: EXAMINE: Syntax error expecting BOXPLOT, NPPLOT, HISTOGRAM, SPREADLEVEL, NONE, or ALL.
- 15 | EXAMINE x/PLOT **.
- | ^~"
-
-"examine.sps:16.21-16.22: error: EXAMINE: Syntax error expecting number.
- 16 | EXAMINE x/CINTERVAL **.
- | ^~"
-
-"examine.sps:17.12-17.13: error: EXAMINE: Syntax error expecting one of the following: STATISTICS, PERCENTILES, TOTAL, NOTOTAL, MISSING, COMPARE, PLOT, CINTERVAL, ID.
- 17 | EXAMINE x/ **.
- | ^~"
-
-"examine.sps:18.17-18.23: error: EXAMINE: TOTAL and NOTOTAL are mutually exclusive.
- 18 | EXAMINE x/TOTAL/NOTOTAL.
- | ^~~~~~~"
-])
-AT_CLEANUP
\ No newline at end of file
projects / pspp / blobdiff