dnl PSPP - a program for statistical analysis.
-dnl Copyright (C) 2017 Free Software Foundation, Inc.
-dnl
+dnl Copyright (C) 2017, 2020 Free Software Foundation, Inc.
+dnl
dnl This program is free software: you can redistribute it and/or modify
dnl it under the terms of the GNU General Public License as published by
dnl the Free Software Foundation, either version 3 of the License, or
dnl (at your option) any later version.
-dnl
+dnl
dnl This program is distributed in the hope that it will be useful,
dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
dnl GNU General Public License for more details.
-dnl
+dnl
dnl You should have received a copy of the GNU General Public License
dnl along with this program. If not, see <http://www.gnu.org/licenses/>.
dnl
AT_BANNER([MATRIX DATA])
-AT_SETUP([Matrix data (lower file)])
-
-AT_DATA([matrix-data.pspp], [dnl
-matrix data
- variables = rowtype_
- var01 TO var08
- /format = lower diagonal
- /file = 'matrix.dat'
- .
-
-list.
+dnl Keep this test in sync with Example 1 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - LOWER DIAGONAL with ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=ROWTYPE_ var01 TO var08
+ /FILE='matrix-data.txt'.
+FORMATS var01 TO var08(F5.2).
+LIST.
])
-
-AT_DATA([matrix.dat], [dnl
-mean 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7
-sd 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5
-n 92 92 92 92 92 92 92 92
-corr 1.00
-corr .18 1.00
-corr -.22 -.17 1.00
-corr .36 .31 -.14 1.00
-corr .27 .16 -.12 .22 1.00
-corr .33 .15 -.17 .24 .21 1.00
-corr .50 .29 -.20 .32 .12 .38 1.00
-corr .17 .29 -.05 .20 .27 .20 .04 1.00
+AT_DATA([matrix-data.txt], [dnl
+MEAN 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7
+SD 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5
+N 92 92 92 92 92 92 92 92
+'CORR' 1.00
+CORR .18 1.00
+CORR -.22 -.17 1.00
+"CORR" .36 .31 -.14 1.00
+COR .27 .16 -.12 .22 1.00
+CORR .33 .15 -.17 .24 .21 1.00
+CORR .50 .29 -.20 .32 .12 .38 1.00
+CORR .17 .29 -.05 .20 .27 .20 .04 1.00
])
-
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [0], [dnl
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
Table: Data List
ROWTYPE_,VARNAME_,var01,var02,var03,var04,var05,var06,var07,var08
-mean ,,24.3000,5.4000,69.7000,20.1000,13.4000,2.7000,27.9000,3.7000
-STDDEV ,,5.7000,1.5000,23.5000,5.8000,2.8000,4.5000,5.4000,1.5000
-n ,,92.0000,92.0000,92.0000,92.0000,92.0000,92.0000,92.0000,92.0000
-corr ,var01,1.0000,.1800,-.2200,.3600,.2700,.3300,.5000,.1700
-corr ,var02,.1800,1.0000,-.1700,.3100,.1600,.1500,.2900,.2900
-corr ,var03,-.2200,-.1700,1.0000,-.1400,-.1200,-.1700,-.2000,-.0500
-corr ,var04,.3600,.3100,-.1400,1.0000,.2200,.2400,.3200,.2000
-corr ,var05,.2700,.1600,-.1200,.2200,1.0000,.2100,.1200,.2700
-corr ,var06,.3300,.1500,-.1700,.2400,.2100,1.0000,.3800,.2000
-corr ,var07,.5000,.2900,-.2000,.3200,.1200,.3800,1.0000,.0400
-corr ,var08,.1700,.2900,-.0500,.2000,.2700,.2000,.0400,1.0000
+MEAN,,24.30,5.40,69.70,20.10,13.40,2.70,27.90,3.70
+STDDEV,,5.70,1.50,23.50,5.80,2.80,4.50,5.40,1.50
+N,,92.00,92.00,92.00,92.00,92.00,92.00,92.00,92.00
+CORR,var01,1.00,.18,-.22,.36,.27,.33,.50,.17
+CORR,var02,.18,1.00,-.17,.31,.16,.15,.29,.29
+CORR,var03,-.22,-.17,1.00,-.14,-.12,-.17,-.20,-.05
+CORR,var04,.36,.31,-.14,1.00,.22,.24,.32,.20
+CORR,var05,.27,.16,-.12,.22,1.00,.21,.12,.27
+CORR,var06,.33,.15,-.17,.24,.21,1.00,.38,.20
+CORR,var07,.50,.29,-.20,.32,.12,.38,1.00,.04
+CORR,var08,.17,.29,-.05,.20,.27,.20,.04,1.00
])
AT_CLEANUP
-
-
-AT_SETUP([Matrix data (upper)])
-
-AT_DATA([matrix-data.pspp], [dnl
+AT_SETUP([MATRIX DATA - UPPER DIAGONAL with ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
matrix data
variables = rowtype_ var01 var02 var03 var04
/format = upper diagonal.
begin data
mean 34 35 36 37
sd 22 11 55 66
-n_vector 100 101 102 103
+n_ve 100 101 102 103
corr 1 9 8 7
corr 1 6 5
corr 1 4
list.
])
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [0], [dnl
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
Table: Data List
ROWTYPE_,VARNAME_,var01,var02,var03,var04
-mean ,,34.0000,35.0000,36.0000,37.0000
-STDDEV ,,22.0000,11.0000,55.0000,66.0000
-N ,,100.0000,101.0000,102.0000,103.0000
-corr ,var01,1.0000,9.0000,8.0000,7.0000
-corr ,var02,9.0000,1.0000,6.0000,5.0000
-corr ,var03,8.0000,6.0000,1.0000,4.0000
-corr ,var04,7.0000,5.0000,4.0000,1.0000
+MEAN,,34.0000,35.0000,36.0000,37.0000
+STDDEV,,22.0000,11.0000,55.0000,66.0000
+N,,100.0000,101.0000,102.0000,103.0000
+CORR,var01,1.0000,9.0000,8.0000,7.0000
+CORR,var02,9.0000,1.0000,6.0000,5.0000
+CORR,var03,8.0000,6.0000,1.0000,4.0000
+CORR,var04,7.0000,5.0000,4.0000,1.0000
])
-
AT_CLEANUP
-AT_SETUP([Matrix data (full)])
-
+AT_SETUP([MATRIX DATA - FULL with ROWTYPE_])
dnl Just for fun, this one is in a different case.
-AT_DATA([matrix-data.pspp], [dnl
+AT_DATA([matrix-data.sps], [dnl
matrix data
variables = ROWTYPE_ var01 var02 var03 var04
/format = full diagonal.
list.
])
-
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [0], [dnl
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
Table: Data List
ROWTYPE_,VARNAME_,var01,var02,var03,var04
-MEAN ,,34.0000,35.0000,36.0000,37.0000
-STDDEV ,,22.0000,11.0000,55.0000,66.0000
-N ,,100.0000,101.0000,102.0000,103.0000
-CORR ,var01,1.0000,9.0000,8.0000,7.0000
-CORR ,var02,9.0000,1.0000,6.0000,5.0000
-CORR ,var03,8.0000,6.0000,1.0000,4.0000
-CORR ,var04,7.0000,5.0000,4.0000,1.0000
+MEAN,,34.0000,35.0000,36.0000,37.0000
+STDDEV,,22.0000,11.0000,55.0000,66.0000
+N,,100.0000,101.0000,102.0000,103.0000
+CORR,var01,1.0000,9.0000,8.0000,7.0000
+CORR,var02,9.0000,1.0000,6.0000,5.0000
+CORR,var03,8.0000,6.0000,1.0000,4.0000
+CORR,var04,7.0000,5.0000,4.0000,1.0000
])
-
AT_CLEANUP
-AT_SETUP([Matrix data (upper nodiagonal)])
-
-AT_DATA([matrix-data.pspp], [dnl
+AT_SETUP([MATRIX DATA - UPPER NODIAGONAL with ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
matrix data
variables = rowtype_ var01 var02 var03 var04
/format = upper nodiagonal.
list.
])
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [0], [dnl
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
Table: Data List
ROWTYPE_,VARNAME_,var01,var02,var03,var04
-mean ,,34.0000,35.0000,36.0000,37.0000
-STDDEV ,,22.0000,11.0000,55.0000,66.0000
-n ,,100.0000,101.0000,102.0000,103.0000
-corr ,var01,1.0000,9.0000,8.0000,7.0000
-corr ,var02,9.0000,1.0000,6.0000,5.0000
-corr ,var03,8.0000,6.0000,1.0000,4.0000
-corr ,var04,7.0000,5.0000,4.0000,1.0000
+MEAN,,34.0000,35.0000,36.0000,37.0000
+STDDEV,,22.0000,11.0000,55.0000,66.0000
+N,,100.0000,101.0000,102.0000,103.0000
+CORR,var01,1.0000,9.0000,8.0000,7.0000
+CORR,var02,9.0000,1.0000,6.0000,5.0000
+CORR,var03,8.0000,6.0000,1.0000,4.0000
+CORR,var04,7.0000,5.0000,4.0000,1.0000
])
-
AT_CLEANUP
+dnl Keep this test in sync with Example 2 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - UPPER NODIAGONAL with ROWTYPE_ - 2])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=ROWTYPE_ var01 TO var08
+ /FORMAT=UPPER NODIAGONAL.
+BEGIN DATA.
+MEAN 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7
+SD 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5
+N 92 92 92 92 92 92 92 92
+CORR .17 .50 -.33 .27 .36 -.22 .18
+CORR .29 .29 -.20 .32 .12 .38
+CORR .05 .20 -.15 .16 .21
+CORR .20 .32 -.17 .12
+CORR .27 .12 -.24
+CORR -.20 -.38
+CORR .04
+END DATA.
+FORMATS var01 TO var08(F6.2).
+LIST.
+])
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
+Table: Data List
+ROWTYPE_,VARNAME_,var01,var02,var03,var04,var05,var06,var07,var08
+MEAN,,24.30,5.40,69.70,20.10,13.40,2.70,27.90,3.70
+STDDEV,,5.70,1.50,23.50,5.80,2.80,4.50,5.40,1.50
+N,,92.00,92.00,92.00,92.00,92.00,92.00,92.00,92.00
+CORR,var01,1.00,.17,.50,-.33,.27,.36,-.22,.18
+CORR,var02,.17,1.00,.29,.29,-.20,.32,.12,.38
+CORR,var03,.50,.29,1.00,.05,.20,-.15,.16,.21
+CORR,var04,-.33,.29,.05,1.00,.20,.32,-.17,.12
+CORR,var05,.27,-.20,.20,.20,1.00,.27,.12,-.24
+CORR,var06,.36,.32,-.15,.32,.27,1.00,-.20,-.38
+CORR,var07,-.22,.12,.16,-.17,.12,-.20,1.00,.04
+CORR,var08,.18,.38,.21,.12,-.24,-.38,.04,1.00
+])
+AT_CLEANUP
-AT_SETUP([Matrix data (lower nodiagonal)])
-
-AT_DATA([matrix-data.pspp], [dnl
+AT_SETUP([MATRIX DATA - LOWER NODIAGONAL with ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
matrix data
variables = rowtype_ var01 var02 var03 var04
- /format = lower nodiagonal.
+ /format = lower nodiagonal
+ /cells = 2.
begin data
mean 34 35 36 37
list.
])
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [0], [dnl
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
+matrix-data.sps:4: warning: MATRIX DATA: CELLS is ignored when VARIABLES includes ROWTYPE_
+
Table: Data List
ROWTYPE_,VARNAME_,var01,var02,var03,var04
-mean ,,34.0000,35.0000,36.0000,37.0000
-STDDEV ,,22.0000,11.0000,55.0000,66.0000
-n ,,100.0000,101.0000,102.0000,103.0000
-corr ,var01,1.0000,9.0000,8.0000,7.0000
-corr ,var02,9.0000,1.0000,6.0000,5.0000
-corr ,var03,8.0000,6.0000,1.0000,4.0000
-corr ,var04,7.0000,5.0000,4.0000,1.0000
+MEAN,,34.0000,35.0000,36.0000,37.0000
+STDDEV,,22.0000,11.0000,55.0000,66.0000
+N,,100.0000,101.0000,102.0000,103.0000
+CORR,var01,1.0000,9.0000,8.0000,7.0000
+CORR,var02,9.0000,1.0000,6.0000,5.0000
+CORR,var03,8.0000,6.0000,1.0000,4.0000
+CORR,var04,7.0000,5.0000,4.0000,1.0000
])
-
AT_CLEANUP
-
-
-AT_SETUP([Matrix data split data])
-
-AT_DATA([matrix-data.pspp], [dnl
+AT_SETUP([MATRIX DATA - split data])
+AT_DATA([matrix-data.sps], [dnl
matrix data
variables = s1 s2 rowtype_ var01 var02 var03
/split=s1 s2.
list.
])
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
+Table: Variables
+Name,Position,Measurement Level,Role,Width,Alignment,Print Format,Write Format
+s1,1,Nominal,Input,8,Right,F4.0,F4.0
+s2,2,Nominal,Input,8,Right,F4.0,F4.0
+ROWTYPE_,3,Nominal,Input,8,Left,A8,A8
+VARNAME_,4,Nominal,Input,8,Left,A8,A8
+var01,5,Scale,Input,8,Right,F10.4,F10.4
+var02,6,Scale,Input,8,Right,F10.4,F10.4
+var03,7,Scale,Input,8,Right,F10.4,F10.4
+
+Table: Split Values
+Variable,Value
+s1,8
+s2,0
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [0], [dnl
-Variable,Description,Position
-s1,Format: F4.0,1
-s2,Format: F4.0,2
-ROWTYPE_,Format: A8,3
-VARNAME_,Format: A8,4
-var01,Format: F10.4,5
-var02,Format: F10.4,6
-var03,Format: F10.4,7
+Table: Data List
+s1,s2,ROWTYPE_,VARNAME_,var01,var02,var03
+8,0,MEAN,,21.4000,5.0000,72.9000
+8,0,STDDEV,,6.5000,1.6000,22.8000
+8,0,N,,106.0000,106.0000,106.0000
+8,0,CORR,var01,1.0000,.4100,-.1600
+8,0,CORR,var02,.4100,1.0000,-.2200
+8,0,CORR,var03,-.1600,-.2200,1.0000
+
+Table: Split Values
+Variable,Value
+s1,8
+s2,1
Table: Data List
s1,s2,ROWTYPE_,VARNAME_,var01,var02,var03
-8,0,mean ,,21.4000,5.0000,72.9000
-8,0,STDDEV ,,6.5000,1.6000,22.8000
-8,0,n ,,106.0000,106.0000,106.0000
-8,0,corr ,var01,1.0000,.4100,-.1600
-8,0,corr ,var02,.4100,1.0000,-.2200
-8,0,corr ,var03,-.1600,-.2200,1.0000
-8,1,mean ,,11.4000,1.0000,52.9000
-8,1,STDDEV ,,9.5000,8.6000,12.8000
-8,1,n ,,10.0000,11.0000,12.0000
-8,1,corr ,var01,1.0000,.5100,.3600
-8,1,corr ,var02,.5100,1.0000,-.4100
-8,1,corr ,var03,.3600,-.4100,1.0000
+8,1,MEAN,,11.4000,1.0000,52.9000
+8,1,STDDEV,,9.5000,8.6000,12.8000
+8,1,N,,10.0000,11.0000,12.0000
+8,1,CORR,var01,1.0000,.5100,.3600
+8,1,CORR,var02,.5100,1.0000,-.4100
+8,1,CORR,var03,.3600,-.4100,1.0000
])
AT_CLEANUP
+dnl Keep this test in sync with Example 4 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - split data - 2])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=s1 ROWTYPE_ var01 TO var04
+ /SPLIT=s1
+ /FORMAT=FULL.
+BEGIN DATA.
+0 MEAN 34 35 36 37
+0 SD 22 11 55 66
+0 N 99 98 99 92
+0 CORR 1 .9 .8 .7
+0 CORR .9 1 .6 .5
+0 CORR .8 .6 1 .4
+0 CORR .7 .5 .4 1
+1 MEAN 44 45 34 39
+1 SD 23 15 51 46
+1 N 98 34 87 23
+1 CORR 1 .2 .3 .4
+1 CORR .2 1 .5 .6
+1 CORR .3 .5 1 .7
+1 CORR .4 .6 .7 1
+END DATA.
+FORMATS var01 TO var04(F5.1).
+LIST.
+])
+
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
+Table: Split Values
+Variable,Value
+s1,0
+Table: Data List
+s1,ROWTYPE_,VARNAME_,var01,var02,var03,var04
+0,MEAN,,34.0,35.0,36.0,37.0
+0,STDDEV,,22.0,11.0,55.0,66.0
+0,N,,99.0,98.0,99.0,92.0
+0,CORR,var01,1.0,.9,.8,.7
+0,CORR,var02,.9,1.0,.6,.5
+0,CORR,var03,.8,.6,1.0,.4
+0,CORR,var04,.7,.5,.4,1.0
+
+Table: Split Values
+Variable,Value
+s1,1
+Table: Data List
+s1,ROWTYPE_,VARNAME_,var01,var02,var03,var04
+1,MEAN,,44.0,45.0,34.0,39.0
+1,STDDEV,,23.0,15.0,51.0,46.0
+1,N,,98.0,34.0,87.0,23.0
+1,CORR,var01,1.0,.2,.3,.4
+1,CORR,var02,.2,1.0,.5,.6
+1,CORR,var03,.3,.5,1.0,.7
+1,CORR,var04,.4,.6,.7,1.0
+])
+AT_CLEANUP
-AT_SETUP([Matrix data duplicate variable])
+dnl Keep this test in sync with Example 5 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - factor variables])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=ROWTYPE_ f1 var01 TO var04
+ /FACTOR=f1.
+BEGIN DATA.
+MEAN 0 34 35 36 37
+SD 0 22 11 55 66
+N 0 99 98 99 92
+MEAN 1 44 45 34 39
+SD 1 23 15 51 46
+N 1 98 34 87 23
+CORR . 1
+CORR . .9 1
+CORR . .8 .6 1
+CORR . .7 .5 .4 1
+END DATA.
+FORMATS var01 TO var04(F5.1).
+LIST.
+])
+
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
+Table: Data List
+ROWTYPE_,f1,VARNAME_,var01,var02,var03,var04
+MEAN,0,,34.0,35.0,36.0,37.0
+STDDEV,0,,22.0,11.0,55.0,66.0
+N,0,,99.0,98.0,99.0,92.0
+MEAN,1,,44.0,45.0,34.0,39.0
+STDDEV,1,,23.0,15.0,51.0,46.0
+N,1,,98.0,34.0,87.0,23.0
+CORR,.,var01,1.0,.9,.8,.7
+CORR,.,var02,.9,1.0,.6,.5
+CORR,.,var03,.8,.6,1.0,.4
+CORR,.,var04,.7,.5,.4,1.0
+])
+AT_CLEANUP
-dnl Negative test to check for sane behaviour in the face of bad syntax
-AT_DATA([matrix-data.pspp], [dnl
-set decimal = dot .
+AT_SETUP([MATRIX DATA - factors and splits])
+AT_DATA([matrix-data.sps], [dnl
matrix data
- variables = s1 s1 rowtype_ var01 var02 var03
- /split=s1.
+ variables = s f rowtype_ var01 var02 var03
+ /split=s
+ /factor=f.
begin data
-0 mean 21.4 5.0 72.9
-0 sd 6.5 1.6 22.8
-0 n 106 106 106
-0 corr 1
-0 corr .41 1
-0 corr -.16 -.22 1
-end data .
+8 0 mean 21.4 5.0 72.9
+8 0 sd 6.5 1.6 22.8
+8 0 n 106 106 106
+8 . corr 1
+8 . corr .41 1
+8 . corr -.16 -.22 1
+9 1 mean 11.4 1.0 52.9
+9 1 sd 9.5 8.6 12.8
+9 1 n 10 11 12
+9 . corr 1
+9 . corr .51 1
+9 . corr .36 -.41 1
+end data.
+
+display dictionary.
list.
])
+AT_CHECK([pspp matrix-data.sps -O format=csv], [0], [dnl
+Table: Variables
+Name,Position,Measurement Level,Role,Width,Alignment,Print Format,Write Format
+s,1,Nominal,Input,8,Right,F4.0,F4.0
+ROWTYPE_,2,Nominal,Input,8,Left,A8,A8
+f,3,Nominal,Input,8,Right,F4.0,F4.0
+VARNAME_,4,Nominal,Input,8,Left,A8,A8
+var01,5,Scale,Input,8,Right,F10.4,F10.4
+var02,6,Scale,Input,8,Right,F10.4,F10.4
+var03,7,Scale,Input,8,Right,F10.4,F10.4
+
+Table: Split Values
+Variable,Value
+s,8
+Table: Data List
+s,ROWTYPE_,f,VARNAME_,var01,var02,var03
+8,MEAN,0,,21.4000,5.0000,72.9000
+8,STDDEV,0,,6.5000,1.6000,22.8000
+8,N,0,,106.0000,106.0000,106.0000
+8,CORR,.,var01,1.0000,.4100,-.1600
+8,CORR,.,var02,.4100,1.0000,-.2200
+8,CORR,.,var03,-.1600,-.2200,1.0000
+
+Table: Split Values
+Variable,Value
+s,9
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [1], [dnl
-matrix-data.pspp:3: error: MATRIX DATA: Variable s1 appears twice in variable list.
+Table: Data List
+s,ROWTYPE_,f,VARNAME_,var01,var02,var03
+9,MEAN,1,,11.4000,1.0000,52.9000
+9,STDDEV,1,,9.5000,8.6000,12.8000
+9,N,1,,10.0000,11.0000,12.0000
+9,CORR,.,var01,1.0000,.5100,.3600
+9,CORR,.,var02,.5100,1.0000,-.4100
+9,CORR,.,var03,.3600,-.4100,1.0000
+])
+AT_CLEANUP
-matrix-data.pspp:6: error: Stopping syntax file processing here to avoid a cascade of dependent command failures.
+AT_SETUP([MATRIX DATA - bad ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+matrix data
+ variables = rowtype_ var01 var02 var03 var04
+ /format = upper diagonal.
+
+begin data
+cork 1 9 8 7
+corr 1 6 5
+corr 1 4
+corr 1
+end data.
+
+list.
])
+AT_CHECK([pspp -O format=csv matrix-data.sps], [1], [dnl
+"matrix-data.sps:6.1-6.4: error: Unknown row type ""cork""."
+])
AT_CLEANUP
+AT_SETUP([MATRIX DATA - unexpected ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+matrix data
+ variables = rowtype_ f1 var01 var02 var03 var04
+ /content = corr (sd)
+ /factor = f1
+ /format = upper diagonal.
+
+begin data
+corr . 1 9 8 7
+corr . 1 6 5
+corr . 1 4
+corr . 1
+sd . 1 2 3 4
+
+corr 0 1 9 8 7
+corr 0 1 6 5
+corr 0 1 4
+corr 0 1
+sd 0 1 2 3 4
+end data.
+list.
+])
-AT_SETUP([Matrix data - long variable names])
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
+matrix-data.sps:12: warning: Data contains pooled row type STDDEV not included in CONTENTS.
+
+matrix-data.sps:14: warning: Data contains with-factors row type CORR not included in CONTENTS.
+
+Table: Data List
+ROWTYPE_,f1,VARNAME_,var01,var02,var03,var04
+CORR,.,var01,1.0000,9.0000,8.0000,7.0000
+CORR,.,var02,9.0000,1.0000,6.0000,5.0000
+CORR,.,var03,8.0000,6.0000,1.0000,4.0000
+CORR,.,var04,7.0000,5.0000,4.0000,1.0000
+STDDEV,.,,1.0000,2.0000,3.0000,4.0000
+CORR,0,var01,1.0000,9.0000,8.0000,7.0000
+CORR,0,var02,9.0000,1.0000,6.0000,5.0000
+CORR,0,var03,8.0000,6.0000,1.0000,4.0000
+CORR,0,var04,7.0000,5.0000,4.0000,1.0000
+STDDEV,0,,1.0000,2.0000,3.0000,4.0000
+])
+AT_CLEANUP
-AT_DATA([matrix-data.pspp], [dnl
+AT_SETUP([MATRIX DATA - bad number])
+AT_DATA([matrix-data.sps], [dnl
+matrix data
+ variables = rowtype_ var01 var02 var03 var04
+ /format = upper diagonal.
+
+begin data
+corr 1 9 8 7
+corr 1 x 5
+corr 1 4
+corr 1
+end data.
+
+list.
+])
+
+AT_CHECK([pspp -O format=csv matrix-data.sps], [1], [dnl
+matrix-data.sps:7.15: error: Field contents are not numeric.
+
+Table: Data List
+ROWTYPE_,VARNAME_,var01,var02,var03,var04
+CORR,var01,1.0000,9.0000,8.0000,7.0000
+CORR,var02,9.0000,1.0000,. ,5.0000
+CORR,var03,8.0000,. ,1.0000,4.0000
+CORR,var04,7.0000,5.0000,4.0000,1.0000
+])
+AT_CLEANUP
+
+AT_SETUP([MATRIX DATA - long variable names])
+AT_DATA([matrix-data.sps], [dnl
matrix data
variables = rowtype_ var01 var_two variable_number_three variableFour
/format = upper diagonal.
list.
])
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [0], [dnl
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
Table: Data List
ROWTYPE_,VARNAME_,var01,var_two,variable_number_three,variableFour
-mean ,,34.0000,35.0000,36.0000,37.0000
-STDDEV ,,22.0000,11.0000,55.0000,66.0000
-N ,,100.0000,101.0000,102.0000,103.0000
-corr ,var01,1.0000,9.0000,8.0000,7.0000
-corr ,var_two,9.0000,1.0000,6.0000,5.0000
-corr ,variable_number_three,8.0000,6.0000,1.0000,4.0000
-corr ,variableFour,7.0000,5.0000,4.0000,1.0000
+MEAN,,34.0000,35.0000,36.0000,37.0000
+STDDEV,,22.0000,11.0000,55.0000,66.0000
+N,,100.0000,101.0000,102.0000,103.0000
+CORR,var01,1.0000,9.0000,8.0000,7.0000
+CORR,var_two,9.0000,1.0000,6.0000,5.0000
+CORR,variable_number_three,8.0000,6.0000,1.0000,4.0000
+CORR,variableFour,7.0000,5.0000,4.0000,1.0000
])
-
AT_CLEANUP
-
-
-AT_SETUP([Matrix reader - read integrity])
-
+AT_SETUP([MATRIX DATA - read integrity])
dnl Check that matrices presented are read correctly.
dnl The example below is an unlikely one since all
-dnl covariance/correlation matrices must be symetrical
+dnl covariance/correlation matrices must be symmetrical
dnl but it serves a purpose for this test.
-AT_DATA([matrix-reader.pspp], [dnl
+AT_DATA([matrix-reader.sps], [dnl
matrix data
variables = rowtype_ var01 to var9
/format = full.
corr 81 82 83 84 85 86 87 88 89
corr 91 92 93 94 95 96 97 98 99
end data.
-
+DEBUG MATRIX READ.
+FORMATS var01 to var09(F3.0).
+list.
factor /matrix = in (corr = *)
/analysis var02 var04 var06
/method = correlation
/print correlation.
])
-AT_CHECK([pspp -O format=csv matrix-reader.pspp], [0], [dnl
+AT_CHECK([pspp --testing-mode -O format=csv matrix-reader.sps], [0], [dnl
+Table: Debug Matrix Reader
+,,,var01,var02,var03,var04,var05,var06,var07,var08,var09
+1,Correlation,var01,11.000,12.000,13.000,14.000,15.000,16.000,17.000,18.000,19.000
+,,var02,21.000,22.000,23.000,24.000,25.000,26.000,27.000,28.000,29.000
+,,var03,31.000,32.000,33.000,34.000,35.000,36.000,37.000,38.000,39.000
+,,var04,41.000,42.000,43.000,44.000,45.000,46.000,47.000,48.000,49.000
+,,var05,51.000,52.000,53.000,54.000,55.000,56.000,57.000,58.000,59.000
+,,var06,61.000,62.000,63.000,64.000,65.000,66.000,67.000,68.000,69.000
+,,var07,71.000,72.000,73.000,74.000,75.000,76.000,77.000,78.000,79.000
+,,var08,81.000,82.000,83.000,84.000,85.000,86.000,87.000,88.000,89.000
+,,var09,91.000,92.000,93.000,94.000,95.000,96.000,97.000,98.000,99.000
+,N,Value,1.000,2.000,3.000,4.000,5.000,6.000,7.000,8.000,9.000
+,Standard Deviation,Value,100.000,200.000,300.000,400.000,500.000,600.000,700.000,800.000,900.000
+
+Table: Data List
+ROWTYPE_,VARNAME_,var01,var02,var03,var04,var05,var06,var07,var08,var09
+N,,1,2,3,4,5,6,7,8,9
+STDDEV,,100,200,300,400,500,600,700,800,900
+CORR,var01,11,12,13,14,15,16,17,18,19
+CORR,var02,21,22,23,24,25,26,27,28,29
+CORR,var03,31,32,33,34,35,36,37,38,39
+CORR,var04,41,42,43,44,45,46,47,48,49
+CORR,var05,51,52,53,54,55,56,57,58,59
+CORR,var06,61,62,63,64,65,66,67,68,69
+CORR,var07,71,72,73,74,75,76,77,78,79
+CORR,var08,81,82,83,84,85,86,87,88,89
+CORR,var09,91,92,93,94,95,96,97,98,99
+
Table: Correlation Matrix
,,var02,var04,var06
-Correlations,var02,22.00,24.00,26.00
-,var04,42.00,44.00,46.00
-,var06,62.00,64.00,66.00
+Correlation,var02,22.000,24.000,26.000
+,var04,42.000,44.000,46.000
+,var06,62.000,64.000,66.000
Table: Component Matrix
,Component,
var04,6.95,2.15
var06,9.22,.01
])
-
AT_CLEANUP
-
-AT_SETUP([Matrix data - too many rows])
-
+AT_SETUP([MATRIX DATA - too many rows])
dnl Test for a crash which occurred when the matrix had more rows declared
dnl than variables to hold them.
-AT_DATA([matrix-data.pspp], [dnl
+AT_DATA([matrix-data.sps], [dnl
matrix data
variables = rowtype_
var01 var02 var03 var04
corr 1.00 .70
corr 1.00
end data .
-
-execute.
+FORMATS var01 TO var04 (F6.2).
+LIST.
])
+AT_CHECK([pspp -O format=csv matrix-data.sps], [1], [dnl
+matrix-data.sps:10.29-10.31: error: Extraneous data expecting end of line.
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [1], [dnl
-matrix-data.pspp:13: error: MATRIX DATA: There are 4 variable declared but the data has at least 5 matrix rows.
+matrix-data.sps:11.24-11.31: error: Extraneous data expecting end of line.
-matrix-data.pspp:20: error: EXECUTE: EXECUTE is allowed only after the active dataset has been defined.
-])
+matrix-data.sps:12.19-12.32: error: Extraneous data expecting end of line.
+matrix-data.sps:18: error: Matrix CORR had 9 rows but 4 rows were expected.
+Table: Data List
+ROWTYPE_,VARNAME_,var01,var02,var03,var04
+MEAN,,21.40,5.00,72.90,17.40
+STDDEV,,6.50,1.60,22.80,5.70
+N,,106.00,106.00,106.00,106.00
+CORR,var01,1.00,.32,.48,.28
+CORR,var02,.32,1.00,.72,.54
+CORR,var03,.48,.72,1.00,.50
+CORR,var04,.28,.54,.50,1.00
+])
AT_CLEANUP
+AT_SETUP([MATRIX DATA - too few rows])
+AT_DATA([matrix-data.sps], [dnl
+matrix data
+ variables = rowtype_ s1 var01 var02 var03 var04
+ /split s1
+ /format = upper diagonal
+ /file='matrix-data.txt'.
+FORMATS var01 TO var04 (F6.2).
+LIST.
+])
+AT_DATA([matrix-data.txt], [dnl
+mean 1 21.4 5.0 72.9 17.4
+sd 1 6.5 1.6 22.8 5.7
+n 1 106 106 106 106
+corr 1 1.00 .32 .48 .28
+corr 2 1.00 .32 .48 .28
+corr 2 2.00 .72 .54
+])
+
+AT_CHECK([pspp -O format=csv matrix-data.sps], [1], [dnl
+matrix-data.txt:5: error: Matrix CORR had 1 rows but 4 rows were expected.
+
+matrix-data.txt:6: error: Matrix CORR had 2 rows but 4 rows were expected.
+Table: Split Values
+Variable,Value
+s1,1
+Table: Data List
+s1,ROWTYPE_,VARNAME_,var01,var02,var03,var04
+1,MEAN,,21.40,5.00,72.90,17.40
+1,STDDEV,,6.50,1.60,22.80,5.70
+1,N,,106.00,106.00,106.00,106.00
+1,CORR,var01,1.00,.32,.48,.28
+1,CORR,var02,.32,1.00,. ,. @&t@
+1,CORR,var03,.48,. ,1.00,. @&t@
+1,CORR,var04,.28,. ,. ,1.00
+
+Table: Split Values
+Variable,Value
+s1,2
-AT_SETUP([Matrix data (badly formed)])
+Table: Data List
+s1,ROWTYPE_,VARNAME_,var01,var02,var03,var04
+2,CORR,var01,1.00,.32,.48,.28
+2,CORR,var02,.32,2.00,.72,.54
+2,CORR,var03,.48,.72,1.00,. @&t@
+2,CORR,var04,.28,.54,. ,1.00
+])
+AT_CLEANUP
-AT_DATA([data.pspp], [dnl
-data list list /ROWTYPE_ (a8) VARNAME_(a4) v1 v2 v3 v4xxxxxxxxxxxxxxxxxxxxxzzzzzzzzzzzzzxxxxxxxxx.
+AT_SETUP([MATRIX DATA - badly formed])
+AT_DATA([data.sps], [dnl
+data list list NOTABLE /ROWTYPE_ (a8) VARNAME_(a4) v1 v2 v3 v4xxxxxxxxxxxxxxxxxxxxxzzzzzzzzzzzzzxxxxxxxxx.
begin data
mean "" 1 2 3 4
sd "" 5 6 7 8
corr v4 4 3 21 1
end data.
-list.
-
-factor matrix=in(corr = *)
- .
+DEBUG MATRIX READ.
])
-AT_CHECK([pspp -O format=csv data.pspp], [1], [ignore])
-
+AT_CHECK([pspp --testing-mode -O format=csv data.sps], [0], [dnl
+data.sps:12: warning: DEBUG MATRIX READ: CORR matrix has 4 columns but 3 rows named variables to be analyzed (and 1 rows named unknown variables).
+
+Table: Debug Matrix Reader
+,,,v1,v2,v3,v4xxxxxxxxxxxxxxxxxxxxxzzzzzzzzzzzzzxxxxxxxxx
+1,Correlation,v1,11.000,22.000,33.000,44.000
+,,v2,55.000,66.000,77.000,88.000
+,,v3,111.000,222.000,333.000,444.000
+,,v4xxxxxxxxxxxxxxxxxxxxxzzzzzzzzzzzzzxxxxxxxxx,. ,. ,. ,. @&t@
+,N,Value,2.000,3.000,4.000,5.000
+,Mean,Value,1.000,2.000,3.000,4.000
+])
AT_CLEANUP
-
-
-
-AT_SETUP([Matrix data (N subcommand)])
-
-AT_DATA([matrix-data.pspp], [dnl
+AT_SETUP([MATRIX DATA - N subcommand])
+AT_DATA([matrix-data.sps], [dnl
matrix data
variables = rowtype_ var01 var02 var03 var04
/n = 99
list.
])
-AT_CHECK([pspp -O format=csv matrix-data.pspp], [0], [dnl
-"matrix-data.pspp:12: warning: MATRIX DATA: The N subcommand was specified, but a N record was also found in the data. The N record will be ignored."
+AT_CHECK([pspp -O format=csv matrix-data.sps], [1], [dnl
+matrix-data.sps:8: error: N record is not allowed with N subcommand. Ignoring N record.
Table: Data List
ROWTYPE_,VARNAME_,var01,var02,var03,var04
-N ,,99.0000,99.0000,99.0000,99.0000
-mean ,,34.0000,35.0000,36.0000,37.0000
-STDDEV ,,22.0000,11.0000,55.0000,66.0000
-corr ,var01,1.0000,9.0000,8.0000,7.0000
-corr ,var02,9.0000,1.0000,6.0000,5.0000
-corr ,var03,8.0000,6.0000,1.0000,4.0000
-corr ,var04,7.0000,5.0000,4.0000,1.0000
+N,,99.0000,99.0000,99.0000,99.0000
+MEAN,,34.0000,35.0000,36.0000,37.0000
+STDDEV,,22.0000,11.0000,55.0000,66.0000
+CORR,var01,1.0000,9.0000,8.0000,7.0000
+CORR,var02,9.0000,1.0000,6.0000,5.0000
+CORR,var03,8.0000,6.0000,1.0000,4.0000
+CORR,var04,7.0000,5.0000,4.0000,1.0000
+])
+AT_CLEANUP
+
+dnl Keep this test in sync with Example 3 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - N subcommand - 2])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=ROWTYPE_ var01 TO var08
+ /FORMAT=UPPER NODIAGONAL
+ /N 92.
+BEGIN DATA.
+MEAN 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7
+SD 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5
+CORR .17 .50 -.33 .27 .36 -.22 .18
+CORR .29 .29 -.20 .32 .12 .38
+CORR .05 .20 -.15 .16 .21
+CORR .20 .32 -.17 .12
+CORR .27 .12 -.24
+CORR -.20 -.38
+CORR .04
+END DATA.
+FORMATS var01 TO var08(F6.2).
+LIST.
+])
+
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
+Table: Data List
+ROWTYPE_,VARNAME_,var01,var02,var03,var04,var05,var06,var07,var08
+N,,92.00,92.00,92.00,92.00,92.00,92.00,92.00,92.00
+MEAN,,24.30,5.40,69.70,20.10,13.40,2.70,27.90,3.70
+STDDEV,,5.70,1.50,23.50,5.80,2.80,4.50,5.40,1.50
+CORR,var01,1.00,.17,.50,-.33,.27,.36,-.22,.18
+CORR,var02,.17,1.00,.29,.29,-.20,.32,.12,.38
+CORR,var03,.50,.29,1.00,.05,.20,-.15,.16,.21
+CORR,var04,-.33,.29,.05,1.00,.20,.32,-.17,.12
+CORR,var05,.27,-.20,.20,.20,1.00,.27,.12,-.24
+CORR,var06,.36,.32,-.15,.32,.27,1.00,-.20,-.38
+CORR,var07,-.22,.12,.16,-.17,.12,-.20,1.00,.04
+CORR,var08,.18,.38,.21,.12,-.24,-.38,.04,1.00
+])
+AT_CLEANUP
+
+dnl A "no-crash" test. This was observed to cause problems.
+dnl See bug #58596
+AT_SETUP([MATRIX DATA - crash])
+
+AT_DATA([matrix-data.sps], [dnl
+begin data
+corr 31
+
+matrix data
+ var1
+begin data
+ corr 1.00
+end data .
+
+matrix data
+ variables = roxtype_ var01
+ /format = upper nodiagonal.
+begin data
+])
+
+AT_CHECK([pspp -O format=csv matrix-data.sps], [1], [ignore])
+AT_CLEANUP
+\f
+dnl Keep this test in sync with Example 6 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - LOWER DIAGONAL without ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=var01 TO var08
+ /CONTENTS=MEAN SD N CORR.
+BEGIN DATA.
+24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7
+ 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5
+ 92 92 92 92 92 92 92 92
+1.00
+ .18 1.00
+-.22 -.17 1.00
+ .36 .31 -.14 1.00
+ .27 .16 -.12 .22 1.00
+ .33 .15 -.17 .24 .21 1.00
+ .50 .29 -.20 .32 .12 .38 1.00
+ .17 .29 -.05 .20 .27 .20 .04 1.00
+END DATA.
+FORMATS var01 TO var08(F5.2).
+LIST.
+])
+AT_CHECK([pspp matrix-data.sps -O format=csv], [0], [dnl
+Table: Data List
+ROWTYPE_,VARNAME_,var01,var02,var03,var04,var05,var06,var07,var08
+MEAN,,24.30,5.40,69.70,20.10,13.40,2.70,27.90,3.70
+STDDEV,,5.70,1.50,23.50,5.80,2.80,4.50,5.40,1.50
+N,,92.00,92.00,92.00,92.00,92.00,92.00,92.00,92.00
+CORR,var01,1.00,.18,-.22,.36,.27,.33,.50,.17
+CORR,var02,.18,1.00,-.17,.31,.16,.15,.29,.29
+CORR,var03,-.22,-.17,1.00,-.14,-.12,-.17,-.20,-.05
+CORR,var04,.36,.31,-.14,1.00,.22,.24,.32,.20
+CORR,var05,.27,.16,-.12,.22,1.00,.21,.12,.27
+CORR,var06,.33,.15,-.17,.24,.21,1.00,.38,.20
+CORR,var07,.50,.29,-.20,.32,.12,.38,1.00,.04
+CORR,var08,.17,.29,-.05,.20,.27,.20,.04,1.00
+])
+AT_CLEANUP
+
+AT_SETUP([MATRIX DATA - extraneous data without ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=var01 TO var08
+ /CONTENTS=MEAN SD N CORR.
+BEGIN DATA.
+24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7
+ 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5
+ 92 92 92 92 92 92 92 92
+1.00 .18
+ .18 1.00
+-.22 -.17 1.00
+ .36 .31 -.14 1.00
+ .27 .16 -.12 .22 1.00
+ .33 .15 -.17 .24 .21 1.00
+ .50 .29 -.20 .32 .12 .38 1.00
+ .17 .29 -.05 .20 .27 .20 .04 1.00
+END DATA.
+FORMATS var01 TO var08(F5.2).
+LIST.
+])
+AT_CHECK([pspp matrix-data.sps -O format=csv], [1], [dnl
+matrix-data.sps:8.8-8.10: error: Extraneous data expecting end of line.
+
+Table: Data List
+ROWTYPE_,VARNAME_,var01,var02,var03,var04,var05,var06,var07,var08
+MEAN,,24.30,5.40,69.70,20.10,13.40,2.70,27.90,3.70
+STDDEV,,5.70,1.50,23.50,5.80,2.80,4.50,5.40,1.50
+N,,92.00,92.00,92.00,92.00,92.00,92.00,92.00,92.00
+CORR,var01,1.00,.18,-.22,.36,.27,.33,.50,.17
+CORR,var02,.18,1.00,-.17,.31,.16,.15,.29,.29
+CORR,var03,-.22,-.17,1.00,-.14,-.12,-.17,-.20,-.05
+CORR,var04,.36,.31,-.14,1.00,.22,.24,.32,.20
+CORR,var05,.27,.16,-.12,.22,1.00,.21,.12,.27
+CORR,var06,.33,.15,-.17,.24,.21,1.00,.38,.20
+CORR,var07,.50,.29,-.20,.32,.12,.38,1.00,.04
+CORR,var08,.17,.29,-.05,.20,.27,.20,.04,1.00
+])
+AT_CLEANUP
+
+dnl Keep this test in sync with Example 7 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - Split variables with explicit values without ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=s1 var01 TO var04
+ /SPLIT=s1
+ /FORMAT=FULL
+ /CONTENTS=MEAN SD N CORR.
+BEGIN DATA.
+0 34 35 36 37
+0 22 11 55 66
+0 99 98 99 92
+0 1 .9 .8 .7
+0 .9 1 .6 .5
+0 .8 .6 1 .4
+0 .7 .5 .4 1
+1 44 45 34 39
+1 23 15 51 46
+1 98 34 87 23
+1 1 .2 .3 .4
+1 .2 1 .5 .6
+1 .3 .5 1 .7
+1 .4 .6 .7 1
+END DATA.
+FORMATS var01 TO var04(F5.2).
+LIST.
])
+AT_CHECK([pspp matrix-data.sps -O format=csv], [0], [dnl
+Table: Split Values
+Variable,Value
+s1,0
+Table: Data List
+s1,ROWTYPE_,VARNAME_,var01,var02,var03,var04
+0,MEAN,,34.00,35.00,36.00,37.00
+0,STDDEV,,22.00,11.00,55.00,66.00
+0,N,,99.00,98.00,99.00,92.00
+0,CORR,var01,1.00,.90,.80,.70
+0,CORR,var02,.90,1.00,.60,.50
+0,CORR,var03,.80,.60,1.00,.40
+0,CORR,var04,.70,.50,.40,1.00
+
+Table: Split Values
+Variable,Value
+s1,1
+
+Table: Data List
+s1,ROWTYPE_,VARNAME_,var01,var02,var03,var04
+1,MEAN,,44.00,45.00,34.00,39.00
+1,STDDEV,,23.00,15.00,51.00,46.00
+1,N,,98.00,34.00,87.00,23.00
+1,CORR,var01,1.00,.20,.30,.40
+1,CORR,var02,.20,1.00,.50,.60
+1,CORR,var03,.30,.50,1.00,.70
+1,CORR,var04,.40,.60,.70,1.00
+])
+AT_CLEANUP
+
+dnl Keep this test in sync with Example 8 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - Split variable with sequential values without ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=var01 TO var04
+ /SPLIT=s1
+ /FORMAT=FULL
+ /CONTENTS=MEAN SD N CORR.
+BEGIN DATA.
+34 35 36 37
+22 11 55 66
+99 98 99 92
+ 1 .9 .8 .7
+.9 1 .6 .5
+.8 .6 1 .4
+.7 .5 .4 1
+44 45 34 39
+23 15 51 46
+98 34 87 23
+ 1 .2 .3 .4
+.2 1 .5 .6
+.3 .5 1 .7
+.4 .6 .7 1
+END DATA.
+FORMATS var01 TO var04(F5.2).
+LIST.
+])
+AT_CHECK([pspp matrix-data.sps -O format=csv], [0], [dnl
+Table: Split Values
+Variable,Value
+s1,1
+
+Table: Data List
+s1,ROWTYPE_,VARNAME_,var01,var02,var03,var04
+1,MEAN,,34.00,35.00,36.00,37.00
+1,STDDEV,,22.00,11.00,55.00,66.00
+1,N,,99.00,98.00,99.00,92.00
+1,CORR,var01,1.00,.90,.80,.70
+1,CORR,var02,.90,1.00,.60,.50
+1,CORR,var03,.80,.60,1.00,.40
+1,CORR,var04,.70,.50,.40,1.00
+
+Table: Split Values
+Variable,Value
+s1,2
+
+Table: Data List
+s1,ROWTYPE_,VARNAME_,var01,var02,var03,var04
+2,MEAN,,44.00,45.00,34.00,39.00
+2,STDDEV,,23.00,15.00,51.00,46.00
+2,N,,98.00,34.00,87.00,23.00
+2,CORR,var01,1.00,.20,.30,.40
+2,CORR,var02,.20,1.00,.50,.60
+2,CORR,var03,.30,.50,1.00,.70
+2,CORR,var04,.40,.60,.70,1.00
+])
+AT_CLEANUP
+
+dnl Keep this test in sync with Example 9 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - Factor variables grouping within-cell records by factor without ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=f1 var01 TO var04
+ /FACTOR=f1
+ /CELLS=2
+ /CONTENTS=(MEAN SD N) CORR.
+BEGIN DATA.
+0 34 35 36 37
+0 22 11 55 66
+0 99 98 99 92
+1 44 45 34 39
+1 23 15 51 46
+1 98 34 87 23
+ 1
+ .9 1
+ .8 .6 1
+ .7 .5 .4 1
+END DATA.
+FORMATS var01 TO var04(F5.1).
+LIST.
+])
+AT_CHECK([pspp matrix-data.sps -O format=csv], [0], [dnl
+Table: Data List
+ROWTYPE_,f1,VARNAME_,var01,var02,var03,var04
+MEAN,0,,34.0,35.0,36.0,37.0
+STDDEV,0,,22.0,11.0,55.0,66.0
+N,0,,99.0,98.0,99.0,92.0
+MEAN,1,,44.0,45.0,34.0,39.0
+STDDEV,1,,23.0,15.0,51.0,46.0
+N,1,,98.0,34.0,87.0,23.0
+CORR,.,var01,1.0,.9,.8,.7
+CORR,.,var02,.9,1.0,.6,.5
+CORR,.,var03,.8,.6,1.0,.4
+CORR,.,var04,.7,.5,.4,1.0
+])
+AT_CLEANUP
+
+dnl Keep this test in sync with Example 10 in doc/matrices.texi.
+AT_SETUP([MATRIX DATA - Factor variables grouping within-cell records by row type without ROWTYPE_])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=f1 var01 TO var04
+ /FACTOR=f1
+ /CELLS=2
+ /CONTENTS=(MEAN) (SD) (N) CORR.
+BEGIN DATA.
+0 34 35 36 37
+1 44 45 34 39
+0 22 11 55 66
+1 23 15 51 46
+0 99 98 99 92
+1 98 34 87 23
+ 1
+ .9 1
+ .8 .6 1
+ .7 .5 .4 1
+END DATA.
+FORMATS var01 TO var04(F5.1).
+LIST.
+])
+AT_CHECK([pspp matrix-data.sps -O format=csv], [0], [dnl
+Table: Data List
+ROWTYPE_,f1,VARNAME_,var01,var02,var03,var04
+MEAN,0,,34.0,35.0,36.0,37.0
+MEAN,1,,44.0,45.0,34.0,39.0
+STDDEV,0,,22.0,11.0,55.0,66.0
+STDDEV,1,,23.0,15.0,51.0,46.0
+N,0,,99.0,98.0,99.0,92.0
+N,1,,98.0,34.0,87.0,23.0
+CORR,.,var01,1.0,.9,.8,.7
+CORR,.,var02,.9,1.0,.6,.5
+CORR,.,var03,.8,.6,1.0,.4
+CORR,.,var04,.7,.5,.4,1.0
+])
+AT_CLEANUP
+
+AT_SETUP([MATRIX DATA - syntax errors])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA VARIABLES=var01 varname_.
+MATRIX DATA VARIABLES=v v v.
+MATRIX DATA VARIABLES=rowtype_ v1 v2 v3/SPLIT=rowtype_.
+MATRIX DATA VARIABLES=rowtype_ v1 v2 v3/FACTORS=rowtype_.
+MATRIX DATA VARIABLES=rowtype_ s1 v1 v2 v3/SPLIT=v1/FACTORS=v1.
+
+MATRIX DATA VARIABLES=v1 v2 v3/FORMAT=FULL NODIAGONAL.
+MATRIX DATA VARIABLES=v1 v2 v3/FACTORS=v1.
+MATRIX DATA VARIABLES=v1 v2 v3.
+BEGIN DATA.
+END DATA.
+MATRIX DATA VARIABLES=v1/FACTORS=v1.
+MATRIX DATA VARIABLES=v1 v2 v3 ROWTYPE_.
+MATRIX DATA VARIABLES=v1 v2 v3/CONTENTS=N/N=5.
+MATRIX DATA VARIABLES=v1/CONTENTS=XYZZY.
+MATRIX DATA VARIABLES=v1/CONTENTS=(.
+MATRIX DATA VARIABLES=v1/CONTENTS=(CORR.
+MATRIX DATA VARIABLES=v1/CONTENTS=).
+MATRIX DATA.
+MATRIX DATA VARIABLES=v*.
+MATRIX DATA VARIABLES=v/N=-1.
+MATRIX DATA VARIABLES=v/FORMAT=XYZZY.
+MATRIX DATA VARIABLES=v/FILE=123.
+MATRIX DATA VARIABLES=v/SPLIT=123.
+MATRIX DATA VARIABLES=v/CELLS=-1.
+MATRIX DATA VARIABLES=v/XYZZY.
+])
+AT_CHECK([pspp matrix-data.sps -O format=csv], [1], [dnl
+matrix-data.sps:1: error: MATRIX DATA: VARIABLES may not include VARNAME_.
+
+matrix-data.sps:2: error: MATRIX DATA: Variable v appears twice in variable list.
+
+matrix-data.sps:3: error: MATRIX DATA: ROWTYPE_ is not allowed on SPLIT or FACTORS.
+
+matrix-data.sps:4: error: MATRIX DATA: ROWTYPE_ is not allowed on SPLIT or FACTORS.
+
+matrix-data.sps:5: error: MATRIX DATA: v1 may not appear on both SPLIT and FACTORS.
+
+matrix-data.sps:7: error: MATRIX DATA: FORMAT=FULL and FORMAT=NODIAGONAL are mutually exclusive.
+
+matrix-data.sps:8: error: MATRIX DATA: CELLS is required when factor variables are specified and VARIABLES does not include ROWTYPE_.
+
+matrix-data.sps:9: warning: MATRIX DATA: CONTENTS was not specified and VARIABLES does not include ROWTYPE_. Assuming CONTENTS=CORR.
+
+matrix-data.sps:12: error: MATRIX DATA: CELLS is required when factor variables are specified and VARIABLES does not include ROWTYPE_.
+
+matrix-data.sps:13: error: MATRIX DATA: VARIABLES includes ROWTYPE_ but the continuous variables are not the last ones on VARIABLES.
+
+matrix-data.sps:14: error: MATRIX DATA: Cannot specify N on CONTENTS along with the N subcommand.
+
+matrix-data.sps:15.35-15.39: error: MATRIX DATA: Syntax error at `XYZZY': Row type keyword expected.
+
+matrix-data.sps:16.36: error: MATRIX DATA: Syntax error at end of command: Row type keyword expected.
+
+matrix-data.sps:17.40: error: MATRIX DATA: Syntax error at end of command: Row type keyword expected.
+
+matrix-data.sps:18.35: error: MATRIX DATA: Syntax error at `)': Row type keyword expected.
+
+matrix-data.sps:19.12: error: MATRIX DATA: Syntax error at end of command: expecting VARIABLES.
+
+matrix-data.sps:20.24: error: MATRIX DATA: Syntax error at `*': expecting `/'.
+
+matrix-data.sps:21.27-21.28: error: MATRIX DATA: Syntax error at `-1': Expected non-negative integer for N.
+
+matrix-data.sps:22.32-22.36: error: MATRIX DATA: Syntax error at `XYZZY'.
+
+matrix-data.sps:23.30-23.32: error: MATRIX DATA: Syntax error at `123': expecting a file name or handle name.
+
+matrix-data.sps:24.31-24.33: error: MATRIX DATA: Syntax error at `123': expecting variable name.
+
+matrix-data.sps:25.31-25.32: error: MATRIX DATA: Syntax error at `-1': Expected non-negative integer for CELLS.
+
+matrix-data.sps:26.25-26.29: error: MATRIX DATA: Syntax error at `XYZZY'.
+])
+AT_CLEANUP
+
+dnl I don't know what lunatic thought this was OK, but we strive to be
+dnl compatible.
+AT_SETUP([MATRIX DATA - plus and minus as delimiters])
+AT_DATA([matrix-data.sps], [dnl
+MATRIX DATA
+ VARIABLES=ROWTYPE_ var01 TO var08.
+BEGIN DATA.
+MEAN+24.3+5.4+69.7+20.1+13.4+2.7+27.9+3.7
+SD +5.7+1.5+23.5+5.8+2.8+4.5+5.4+1.5
+N+92+92+92+92+92+92+92+92
+CORR+1.00
+CORR+.18+1.00
+CORR-.22e+0-.17+1.00
+CORR+.36d-0+.31-.14+1.00
+CORR+.27+.16-.12+.22+1.00
+CORR+.33+.15-.17+.24+.21+1.00
+CORR+.50+.29-.20+.32+.12+.38+1.00
+CORR+.17+.29-.05+.20+.27+.20+.04+1.00
+END DATA.
+FORMATS var01 TO var08(F5.2).
+LIST.
+])
+
+AT_CHECK([pspp -O format=csv matrix-data.sps], [0], [dnl
+Table: Data List
+ROWTYPE_,VARNAME_,var01,var02,var03,var04,var05,var06,var07,var08
+MEAN,,24.30,5.40,69.70,20.10,13.40,2.70,27.90,3.70
+STDDEV,,5.70,1.50,23.50,5.80,2.80,4.50,5.40,1.50
+N,,92.00,92.00,92.00,92.00,92.00,92.00,92.00,92.00
+CORR,var01,1.00,.18,-.22,.36,.27,.33,.50,.17
+CORR,var02,.18,1.00,-.17,.31,.16,.15,.29,.29
+CORR,var03,-.22,-.17,1.00,-.14,-.12,-.17,-.20,-.05
+CORR,var04,.36,.31,-.14,1.00,.22,.24,.32,.20
+CORR,var05,.27,.16,-.12,.22,1.00,.21,.12,.27
+CORR,var06,.33,.15,-.17,.24,.21,1.00,.38,.20
+CORR,var07,.50,.29,-.20,.32,.12,.38,1.00,.04
+CORR,var08,.17,.29,-.05,.20,.27,.20,.04,1.00
+])
AT_CLEANUP
projects / pspp / blobdiff