msgid ""
msgstr ""
"Project-Id-Version: PSPP 0.3.1\n"
-"POT-Creation-Date: 2004-01-27 08:20+0800\n"
+"POT-Creation-Date: 2005-05-03 18:47+0800\n"
"PO-Revision-Date: 2004-01-23 13:04+0800\n"
"Last-Translator: John Darrington <john@darrington.wattle.id.au>\n"
"Language-Team: John Darrington <john@darrington.wattle.id.au>\n"
"Report-Msgid-Bugs-To: pspp-dev@gnu.org\n"
"Plural-Forms: nplurals=2; plural=(n!=1);\n"
-#: src/crosstabs.q:255
-msgid ""
-"Missing mode REPORT not allowed in general mode. Assuming MISSING=TABLE."
+#: src/aggregate.c:195
+msgid "while expecting COLUMNWISE"
msgstr ""
-#: src/crosstabs.q:265
-msgid "Write mode ALL not allowed in general mode. Assuming WRITE=CELLS."
+#: src/aggregate.c:224
+msgid "expecting BREAK"
msgstr ""
-#: src/crosstabs.q:324
-msgid "expecting BY"
+#: src/aggregate.c:229
+msgid ""
+"When PRESORTED is specified, specifying sorting directions with (A) or (D) "
+"has no effect. Output data will be sorted the same way as the input data."
msgstr ""
-#: src/crosstabs.q:391
-msgid "VARIABLES must be specified before TABLES."
+#: src/aggregate.c:385
+msgid "expecting aggregation function"
msgstr ""
-#: src/crosstabs.q:428
+#: src/aggregate.c:401
#, c-format
-msgid "Maximum value (%ld) less than minimum value (%ld)."
-msgstr ""
-
-#: src/crosstabs.q:865
-msgid "Summary."
-msgstr ""
-
-#: src/crosstabs.q:867
-msgid "Cases"
-msgstr ""
-
-#: src/crosstabs.q:868 src/frequencies.q:999
-msgid "Valid"
-msgstr ""
-
-#: src/crosstabs.q:869 src/frequencies.q:1066
-msgid "Missing"
-msgstr ""
-
-#: src/crosstabs.q:870 src/crosstabs.q:1071 src/crosstabs.q:1800
-#: src/frequencies.q:1075
-msgid "Total"
-msgstr ""
-
-#: src/crosstabs.q:880
-msgid "N"
-msgstr ""
-
-#: src/crosstabs.q:881 src/frequencies.q:1003 src/frequencies.q:1004
-#: src/frequencies.q:1005
-msgid "Percent"
-msgstr ""
-
-#: src/crosstabs.q:1120
-msgid "count"
-msgstr ""
-
-#: src/crosstabs.q:1121
-msgid "row %"
-msgstr ""
-
-#: src/crosstabs.q:1122
-msgid "column %"
-msgstr ""
-
-#: src/crosstabs.q:1123
-msgid "total %"
-msgstr ""
-
-#: src/crosstabs.q:1124
-msgid "expected"
-msgstr ""
-
-#: src/crosstabs.q:1125
-msgid "residual"
-msgstr ""
-
-#: src/crosstabs.q:1126
-msgid "std. resid."
-msgstr ""
-
-#: src/crosstabs.q:1127
-msgid "adj. resid."
-msgstr ""
-
-#: src/crosstabs.q:1160 src/crosstabs.q:1187 src/crosstabs.q:1207
-#: src/crosstabs.q:1228
-msgid "Statistic"
-msgstr ""
-
-#: src/crosstabs.q:1161 src/crosstabs.q:1188 src/crosstabs.q:1208
-#: src/crosstabs.q:1230 src/frequencies.q:1001 src/frequencies.q:1118
-#: src/sysfile-info.c:536 src/vfm.c:1094
-msgid "Value"
-msgstr ""
-
-#: src/crosstabs.q:1162
-msgid "df"
-msgstr ""
-
-#: src/crosstabs.q:1164
-msgid "Asymp. Sig. (2-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1166
-msgid "Exact. Sig. (2-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1168
-msgid "Exact. Sig. (1-sided)"
-msgstr ""
-
-#: src/crosstabs.q:1186 src/crosstabs.q:1227
-msgid "Category"
-msgstr ""
-
-#: src/crosstabs.q:1189 src/crosstabs.q:1231
-msgid "Asymp. Std. Error"
-msgstr ""
-
-#: src/crosstabs.q:1190 src/crosstabs.q:1232
-msgid "Approx. T"
+msgid "Unknown aggregation function %s."
msgstr ""
-#: src/crosstabs.q:1191 src/crosstabs.q:1233
-msgid "Approx. Sig."
+#: src/aggregate.c:416
+msgid "expecting `('"
msgstr ""
-#: src/crosstabs.q:1206
+#: src/aggregate.c:453
#, c-format
-msgid " 95%% Confidence Interval"
-msgstr ""
-
-#: src/crosstabs.q:1209
-msgid "Lower"
-msgstr ""
-
-#: src/crosstabs.q:1210
-msgid "Upper"
-msgstr ""
-
-#: src/crosstabs.q:1229
-msgid "Type"
-msgstr ""
-
-#: src/crosstabs.q:1977
-msgid "Pearson Chi-Square"
-msgstr ""
-
-#: src/crosstabs.q:1978
-msgid "Likelihood Ratio"
-msgstr ""
-
-#: src/crosstabs.q:1979
-msgid "Fisher's Exact Test"
-msgstr ""
-
-#: src/crosstabs.q:1980
-msgid "Continuity Correction"
-msgstr ""
-
-#: src/crosstabs.q:1981
-msgid "Linear-by-Linear Association"
-msgstr ""
-
-#: src/crosstabs.q:2018 src/crosstabs.q:2088 src/crosstabs.q:2147
-msgid "N of Valid Cases"
-msgstr ""
-
-#: src/crosstabs.q:2034 src/crosstabs.q:2163
-msgid "Nominal by Nominal"
-msgstr ""
-
-#: src/crosstabs.q:2035 src/crosstabs.q:2164
-msgid "Ordinal by Ordinal"
-msgstr ""
-
-#: src/crosstabs.q:2036
-msgid "Interval by Interval"
-msgstr ""
-
-#: src/crosstabs.q:2037
-msgid "Measure of Agreement"
-msgstr ""
-
-#: src/crosstabs.q:2042
-msgid "Phi"
-msgstr ""
-
-#: src/crosstabs.q:2043
-msgid "Cramer's V"
-msgstr ""
-
-#: src/crosstabs.q:2044
-msgid "Contingency Coefficient"
-msgstr ""
-
-#: src/crosstabs.q:2045
-msgid "Kendall's tau-b"
-msgstr ""
-
-#: src/crosstabs.q:2046
-msgid "Kendall's tau-c"
-msgstr ""
-
-#: src/crosstabs.q:2047
-msgid "Gamma"
-msgstr ""
-
-#: src/crosstabs.q:2048
-msgid "Spearman Correlation"
+msgid "Missing argument %d to %s."
msgstr ""
-#: src/crosstabs.q:2049
-msgid "Pearson's R"
+#: src/aggregate.c:462
+#, c-format
+msgid "Arguments to %s must be of same type as source variables."
msgstr ""
-#: src/crosstabs.q:2050
-msgid "Kappa"
+#: src/aggregate.c:472
+msgid "expecting `)'"
msgstr ""
-#: src/crosstabs.q:2120
+#: src/aggregate.c:484
#, c-format
-msgid "Odds Ratio for %s (%g / %g)"
+msgid ""
+"Number of source variables (%d) does not match number of target variables (%"
+"d)."
msgstr ""
-#: src/crosstabs.q:2123
+#: src/aggregate.c:501
#, c-format
-msgid "Odds Ratio for %s (%.*s / %.*s)"
+msgid ""
+"The value arguments passed to the %s function are out-of-order. They will "
+"be treated as if they had been specified in the correct order."
msgstr ""
-#: src/crosstabs.q:2131
+#: src/aggregate.c:569
#, c-format
-msgid "For cohort %s = %g"
+msgid ""
+"Variable name %s is not unique within the aggregate file dictionary, which "
+"contains the aggregate variables and the break variables."
msgstr ""
-#: src/crosstabs.q:2134
+#: src/apply-dict.c:68
#, c-format
-msgid "For cohort %s = %.*s"
-msgstr ""
-
-#: src/crosstabs.q:2165
-msgid "Nominal by Interval"
-msgstr ""
-
-#: src/crosstabs.q:2170
-msgid "Lambda"
-msgstr ""
-
-#: src/crosstabs.q:2171
-msgid "Goodman and Kruskal tau"
-msgstr ""
-
-#: src/crosstabs.q:2172
-msgid "Uncertainty Coefficient"
-msgstr ""
-
-#: src/crosstabs.q:2173
-msgid "Somers' d"
+msgid "Variable %s is %s in target file, but %s in source file."
msgstr ""
-#: src/crosstabs.q:2174
-msgid "Eta"
+#: src/apply-dict.c:71 src/apply-dict.c:72 src/format.c:224 src/sfm-read.c:996
+#: src/sfm-read.c:1125 src/sfm-read.c:1126
+msgid "string"
msgstr ""
-#: src/crosstabs.q:2179
-msgid "Symmetric"
+#: src/apply-dict.c:71 src/apply-dict.c:72 src/format.c:224 src/sfm-read.c:996
+#: src/sfm-read.c:1125 src/sfm-read.c:1126
+msgid "numeric"
msgstr ""
-#: src/crosstabs.q:2180 src/crosstabs.q:2181
+#: src/apply-dict.c:84
#, c-format
-msgid "%s Dependent"
-msgstr ""
-
-#: src/descript.q:152 src/frequencies.q:94
-msgid "Mean"
-msgstr ""
-
-#: src/descript.q:152
-msgid "mean"
-msgstr ""
-
-#: src/descript.q:153 src/frequencies.q:95
-msgid "S.E. Mean"
-msgstr ""
-
-#: src/descript.q:153
-msgid "S E Mean"
-msgstr ""
-
-#: src/descript.q:153
-msgid "SE"
+msgid "Cannot add value labels from source file to long string variable %s."
msgstr ""
-#: src/descript.q:154
-msgid "standard error of mean"
+#: src/apply-dict.c:130
+#, c-format
+msgid ""
+"Cannot apply missing values from source file to long string variable %s."
msgstr ""
-#: src/descript.q:155 src/frequencies.q:98
-msgid "Std Dev"
+#: src/apply-dict.c:163
+msgid "No matching variables found between the source and target files."
msgstr ""
-#: src/descript.q:155
-msgid "SD"
+#: src/ascii.c:230
+#, c-format
+msgid "ASCII driver initializing as `%s'..."
msgstr ""
-#: src/descript.q:156
-msgid "standard deviation"
+#: src/ascii.c:285
+#, c-format
+msgid ""
+"ascii driver: Area of page excluding margins and headers must be at least 59 "
+"characters wide by 15 lines long. Page as configured is only %d characters "
+"by %d lines."
msgstr ""
-#: src/descript.q:157 src/frequencies.q:99
-msgid "Variance"
+#: src/ascii.c:390 src/devind.c:167 src/html.c:103 src/postscript.c:461
+#, c-format
+msgid "%s: Initialization complete."
msgstr ""
-#: src/descript.q:158
-msgid "Var"
+#: src/ascii.c:402 src/devind.c:179 src/html.c:115 src/postscript.c:474
+#, c-format
+msgid "%s: Beginning closing..."
msgstr ""
-#: src/descript.q:158
-msgid "variance"
+#: src/ascii.c:424 src/devind.c:184 src/html.c:120 src/postscript.c:493
+#, c-format
+msgid "%s: Finished closing."
msgstr ""
-#: src/descript.q:159 src/frequencies.q:100
-msgid "Kurtosis"
+#: src/ascii.c:485
+#, c-format
+msgid ""
+"Bad index value for `box' key: syntax is box[INDEX], 0 <= INDEX < %d "
+"decimal, with INDEX expressed in base 4."
msgstr ""
-#: src/descript.q:160
-msgid "Kurt"
+#: src/ascii.c:491
+#, c-format
+msgid "Duplicate value for key `%s'."
msgstr ""
-#: src/descript.q:160
-msgid "kurtosis"
+#: src/ascii.c:500
+#, c-format
+msgid "Unknown configuration parameter `%s' for ascii device driver."
msgstr ""
-#: src/descript.q:161 src/frequencies.q:101
-msgid "S.E. Kurt"
+#: src/ascii.c:513
+#, c-format
+msgid ""
+"Unknown character set `%s'. Valid character sets are `ascii' and `latin1'."
msgstr ""
-#: src/descript.q:161
-msgid "S E Kurt"
+#: src/ascii.c:522
+#, c-format
+msgid ""
+"Unknown overstrike style `%s'. Valid overstrike styles are `single' and "
+"`line'."
msgstr ""
-#: src/descript.q:161
-msgid "SEKurt"
+#: src/ascii.c:531
+#, c-format
+msgid ""
+"Unknown carriage return style `%s'. Valid carriage return styles are `cr' "
+"and `bs'."
msgstr ""
-#: src/descript.q:162
-msgid "standard error of kurtosis"
+#: src/ascii.c:543 src/postscript.c:684
+#, c-format
+msgid "Positive integer required as value for `%s'."
msgstr ""
-#: src/descript.q:163 src/frequencies.q:102
-msgid "Skewness"
+#: src/ascii.c:574
+#, c-format
+msgid "Zero or positive integer required as value for `%s'."
msgstr ""
-#: src/descript.q:163
-msgid "Skew"
+#: src/ascii.c:645 src/postscript.c:642
+#, c-format
+msgid "Boolean value expected for %s."
msgstr ""
-#: src/descript.q:164
-msgid "skewness"
+#: src/ascii.c:677 src/ascii.c:692 src/ascii.c:709
+#, c-format
+msgid "ASCII output driver: %s: %s"
msgstr ""
-#: src/descript.q:165 src/frequencies.q:103
-msgid "S.E. Skew"
+#: src/ascii.c:785
+#, c-format
+msgid "ascii_line_horz: bad hline (%d,%d),%d out of (%d,%d)\n"
msgstr ""
-#: src/descript.q:165
-msgid "S E Skew"
+#: src/ascii.c:819
+#, c-format
+msgid "ascii_line_vert: bad vline %d,(%d,%d) out of (%d,%d)\n"
msgstr ""
-#: src/descript.q:165
-msgid "SESkew"
+#: src/ascii.c:849
+#, c-format
+msgid "ascii_line_intersection: bad intsct (%d,%d) out of (%d,%d)\n"
msgstr ""
-#: src/descript.q:166
-msgid "standard error of skewness"
+#: src/ascii.c:997
+#, c-format
+msgid "%s: horiz=%d, vert=%d\n"
msgstr ""
-#: src/descript.q:167 src/frequencies.q:104
-msgid "Range"
+#: src/ascii.c:1169
+#, c-format
+msgid "Writing `%s': %s"
msgstr ""
-#: src/descript.q:167
-msgid "Rng"
+#: src/ascii.c:1579 src/postscript.c:2098
+#, c-format
+msgid "%s - Page %d"
msgstr ""
-#: src/descript.q:167 src/sfm-read.c:1202
-msgid "range"
+#: src/ascii.c:1646
+msgid "Charts are unsupported with ascii drivers."
msgstr ""
-#: src/descript.q:168 src/frequencies.q:105
-msgid "Minimum"
+#: src/autorecode.c:122
+#, c-format
+msgid "Source variable count (%d) does not match target variable count (%d)."
msgstr ""
-#: src/descript.q:168
-msgid "Min"
+#: src/autorecode.c:139 src/command.c:791 src/compute.c:277 src/do-if.c:253
+#: src/get.c:240 src/lexer.c:424 src/loop.c:241 src/matrix-data.c:528
+#: src/print.c:335 src/print.c:1045 src/recode.c:405 src/sel-if.c:54
+#: src/sel-if.c:131 src/vector.c:194 src/file-handle.q:139
+msgid "expecting end of command"
msgstr ""
-#: src/descript.q:169
-msgid "minimum"
+#: src/autorecode.c:149
+#, c-format
+msgid "Target variable %s duplicates existing variable %s."
msgstr ""
-#: src/descript.q:170 src/frequencies.q:106
-msgid "Maximum"
+#: src/autorecode.c:156
+#, c-format
+msgid "Duplicate variable name %s among target variables."
msgstr ""
-#: src/descript.q:170
-msgid "Max"
+#: src/calendar.c:78
+#, c-format
+msgid "Month %d is not in acceptable range of 0 to 13."
msgstr ""
-#: src/descript.q:171
-msgid "maximum"
+#: src/calendar.c:86
+#, c-format
+msgid "Day %d is not in acceptable range of 0 to 31."
msgstr ""
-#: src/descript.q:172 src/frequencies.q:107
-msgid "Sum"
+#: src/calendar.c:93
+#, c-format
+msgid "Date %04d-%d-%d is before the earliest acceptable date of 1582-10-15."
msgstr ""
-#: src/descript.q:172
-msgid "sum"
+#: src/casefile.c:190
+#, c-format
+msgid "%s: Removing temporary file: %s."
msgstr ""
-#: src/descript.q:213 src/list.q:144
-msgid "No variables specified."
+#: src/casefile.c:337
+#, c-format
+msgid "Error writing temporary file: %s."
msgstr ""
-#: src/descript.q:219
-msgid "OPTIONS may not be used with SAVE, FORMAT, or MISSING."
+#: src/casefile.c:479
+#, c-format
+msgid "%s: Opening temporary file: %s."
msgstr ""
-#: src/descript.q:281
+#: src/casefile.c:505
#, c-format
-msgid "It's not possible to sort on `%s' without displaying `%s'."
+msgid "%s: Seeking temporary file: %s."
msgstr ""
-#: src/descript.q:295
-msgid ""
-"At least one case in the data file had a weight value that was system-"
-"missing, zero, or negative. These case(s) were ignored."
+#: src/casefile.c:521
+#, c-format
+msgid "%s: Reading temporary file: %s."
msgstr ""
-#: src/descript.q:336
-msgid ""
-"Names for z-score variables must be given for individual variables, not for "
-"groups of variables."
+#: src/casefile.c:524
+#, c-format
+msgid "%s: Temporary file ended unexpectedly."
msgstr ""
-#: src/descript.q:344
-msgid "Name for z-score variable expected."
+#: src/cmdline.c:141 src/cmdline.c:160 src/cmdline.c:172 src/command.c:207
+#: src/set.q:425 src/set.q:427 src/set.q:994
+#, c-format
+msgid "%s is not yet implemented."
msgstr ""
-#: src/descript.q:349
+#: src/cmdline.c:243
#, c-format
msgid ""
-"Z-score variable name `%s' is a duplicate variable name with a current "
-"variable."
+"PSPP, a program for statistical analysis of sample data.\n"
+"\n"
+"Usage: %s [OPTION]... FILE...\n"
+"\n"
+"If a long option shows an argument as mandatory, then it is mandatory\n"
+"for the equivalent short option also. Similarly for optional arguments.\n"
+"\n"
+"Configuration:\n"
+" -a, --algorithm={compatible|enhanced}\n"
+" set to `compatible' if you want output\n"
+" calculated from broken algorithms\n"
+" -B, --config-dir=DIR set configuration directory to DIR\n"
+" -o, --device=DEVICE select output driver DEVICE and disable "
+"defaults\n"
+" -d, --define=VAR[=VALUE] set environment variable VAR to VALUE, or empty\n"
+" -u, --undef=VAR undefine environment variable VAR\n"
+"\n"
+"Input and output:\n"
+" -f, --out-file=FILE send output to FILE (overwritten)\n"
+" -p, --pipe read script from stdin, send output to stdout\n"
+" -I-, --no-include clear include path\n"
+" -I, --include=DIR append DIR to include path\n"
+" -c, --command=COMMAND execute COMMAND before .pspp/rc at startup\n"
+"\n"
+"Language modifiers:\n"
+" -i, --interactive interpret scripts in interactive mode\n"
+" -n, --edit just check syntax; don't actually run the code\n"
+" -r, --no-statrc disable execution of .pspp/rc at startup\n"
+" -s, --safer don't allow some unsafe operations\n"
+" -x, --syntax={compatible|enhanced}\n"
+" set to `compatible' if you want only to accept\n"
+" spss compatible syntax\n"
+"\n"
+"Informative output:\n"
+" -h, --help print this help, then exit\n"
+" -l, --list print a list of known driver classes, then exit\n"
+" -V, --version show PSPP version, then exit\n"
+" -v, --verbose increments verbosity level\n"
+"\n"
+"Non-option arguments:\n"
+" FILE1 FILE2 run FILE1, clear the dictionary, run FILE2\n"
+" FILE1 + FILE2 run FILE1 then FILE2 without clearing "
+"dictionary\n"
+" KEY=VALUE overrides macros in output initialization file\n"
+"\n"
msgstr ""
-#: src/descript.q:358
+#: src/cmdline.c:281
#, c-format
-msgid "Z-score variable name `%s' is used multiple times."
-msgstr ""
-
-#: src/descript.q:366
-msgid "`)' expected after z-score variable name."
-msgstr ""
-
-#: src/descript.q:426
msgid ""
-"Ran out of generic names for Z-score variables. There are only 126 generic "
-"names: ZSC001-ZSC0999, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09."
-msgstr ""
-
-#: src/descript.q:455
-msgid "Mapping of variables to corresponding Z-scores."
-msgstr ""
-
-#: src/descript.q:460
-msgid "Source"
-msgstr ""
-
-#: src/descript.q:461
-msgid "Target"
-msgstr ""
-
-#: src/descript.q:548 src/descript.q:554
-msgid "Z-score of "
-msgstr ""
-
-#: src/descript.q:792 src/data-list.c:732 src/data-list.c:869 src/print.c:805
-#: src/sysfile-info.c:135 src/sysfile-info.c:370 src/vfm.c:1093
-msgid "Variable"
-msgstr ""
-
-#: src/descript.q:796
-msgid "Valid N"
-msgstr ""
-
-#: src/descript.q:797
-msgid "Missing N"
+"\n"
+"Report bugs to <%s>.\n"
msgstr ""
-#: src/descript.q:824
+#: src/command.c:145
#, c-format
-msgid "Valid cases = %g; cases with missing value(s) = %g."
+msgid "%s not allowed inside FILE TYPE/END FILE TYPE."
msgstr ""
-#: src/file-handle.q:72
+#: src/command.c:149
#, c-format
-msgid ""
-"File handle %s had already been defined to refer to file %s. It is not "
-"possible to redefine a file handle within a session."
-msgstr ""
-
-#: src/file-handle.q:88 src/autorecode.c:121 src/command.c:696
-#: src/compute.c:284 src/data-list.c:372 src/data-list.c:842
-#: src/data-list.c:1645 src/do-if.c:264 src/get.c:359 src/lexer.c:384
-#: src/loop.c:248 src/matrix-data.c:506 src/print.c:340 src/print.c:1081
-#: src/recode.c:409 src/sel-if.c:56 src/sel-if.c:136 src/vector.c:197
-msgid "expecting end of command"
+msgid "%s not allowed inside FILE TYPE GROUPED/END FILE TYPE."
msgstr ""
-#: src/file-handle.q:94
-msgid "The FILE HANDLE required subcommand NAME is not present."
+#: src/command.c:152
+msgid "RECORD TYPE must be the first command inside a FILE TYPE structure."
msgstr ""
-#: src/file-handle.q:107
-msgid ""
-"Fixed length records were specified on /RECFORM, but record length was not "
-"specified on /LRECL. 80-character records will be assumed."
+#: src/command.c:197
+msgid "expecting command name"
msgstr ""
-#: src/file-handle.q:114
+#: src/command.c:226
#, c-format
msgid ""
-"Record length (%ld) must be at least one byte. 80-character records will be "
-"assumed."
+"%s is not allowed (1) before a command to specify the input program, such as "
+"DATA LIST, (2) between FILE TYPE and END FILE TYPE, (3) between INPUT "
+"PROGRAM and END INPUT PROGRAM."
msgstr ""
-#: src/file-handle.q:126 src/file-handle.q:140
+#: src/command.c:230
#, c-format
-msgid ""
-"%s is not implemented, as the author doesn't know what it is supposed to "
-"do. Send a note to %s."
+msgid "%s is not allowed within an input program."
msgstr ""
-#: src/file-handle.q:147 src/file-handle.q:150
+#: src/command.c:231 src/command.c:232
#, c-format
-msgid "%s is not implemented. If you care, complain."
+msgid "%s is only allowed within an input program."
msgstr ""
-#: src/file-handle.q:232
+#: src/command.c:511
#, c-format
-msgid "File handle `%s' has not been previously declared on FILE HANDLE."
-msgstr ""
-
-#: src/file-handle.q:319
-msgid "<Inline File>"
-msgstr ""
-
-#: src/file-handle.q:338
-msgid "expecting a file name or handle"
-msgstr ""
-
-#: src/frequencies.q:96
-msgid "Median"
-msgstr ""
-
-#: src/frequencies.q:97
-msgid "Mode"
-msgstr ""
-
-#: src/frequencies.q:268
-msgid ""
-"At most one of BARCHART, HISTOGRAM, or HBAR should be given. HBAR will be "
-"assumed. Argument values will be given precedence increasing along the "
-"order given."
+msgid "Unknown command %s."
msgstr ""
-#: src/frequencies.q:349
-#, c-format
+#: src/command.c:617
msgid ""
-"MAX must be greater than or equal to MIN, if both are specified. However, "
-"MIN was specified as %g and MAX as %g. MIN and MAX will be ignored."
+"This command is not accepted in a syntax file. Instead, use FINISH to "
+"terminate a syntax file."
msgstr ""
-#: src/frequencies.q:627
+#: src/command.c:635
msgid ""
-"Upper limit of integer mode value range must be greater than lower limit."
+"This command is not executed in interactive mode. Instead, PSPP drops down "
+"to the command prompt. Use EXIT if you really want to quit."
msgstr ""
-#: src/frequencies.q:639
-#, c-format
-msgid "Variable %s specified multiple times on VARIABLES subcommand."
+#: src/command.c:678 src/command.c:809 src/permissions.c:101
+msgid "This command not allowed when the SAFER option is set."
msgstr ""
-#: src/frequencies.q:652
+#: src/command.c:690
#, c-format
-msgid "Integer mode specified, but %s is not a numeric variable."
-msgstr ""
-
-#: src/frequencies.q:714
-msgid "`)' expected after GROUPED interval list."
+msgid "Error removing `%s': %s."
msgstr ""
-#: src/frequencies.q:724
+#: src/command.c:740
#, c-format
-msgid "Variables %s specified on GROUPED but not on VARIABLES."
+msgid "Couldn't fork: %s."
msgstr ""
-#: src/frequencies.q:727
+#: src/command.c:782
#, c-format
-msgid "Variables %s specified multiple times on GROUPED subcommand."
-msgstr ""
-
-#: src/frequencies.q:787
-msgid "Percentile list expected after PERCENTILES."
+msgid "Error executing command: %s."
msgstr ""
-#: src/frequencies.q:795
-msgid "Percentiles must be greater than 0 and less than 100."
+#: src/command.c:830
+msgid "No operating system support for this command."
msgstr ""
-#: src/frequencies.q:1000 src/frequencies.q:1090 src/frequencies.q:1091
-#: src/frequencies.q:1121
-msgid "Cum"
+#: src/command.c:853
+msgid "This command is not valid in a syntax file."
msgstr ""
-#: src/frequencies.q:1002
-msgid "Frequency"
+#: src/compute.c:141 src/compute.c:190
+#, c-format
+msgid ""
+"When executing COMPUTE: SYSMIS is not a valid value as an index into vector %"
+"s."
msgstr ""
-#: src/frequencies.q:1021
-msgid "Value Label"
+#: src/compute.c:144 src/compute.c:197
+#, c-format
+msgid ""
+"When executing COMPUTE: %g is not a valid value as an index into vector %s."
msgstr ""
-#: src/frequencies.q:1119
-msgid "Freq"
+#: src/compute.c:339
+#, c-format
+msgid "There is no vector named %s."
msgstr ""
-#: src/frequencies.q:1120 src/frequencies.q:1122
-msgid "Pct"
+#: src/count.c:156
+msgid "Destination cannot be a string variable."
msgstr ""
-#: src/frequencies.q:1277
+#: src/count.c:263
#, c-format
-msgid "No valid data for variable %s; statistics not displayed."
+msgid ""
+"%g THRU %g is not a valid range. The number following THRU must be at least "
+"as big as the number preceding THRU."
msgstr ""
-#: src/frequencies.q:1300
-msgid "Percentile"
+#: src/data-in.c:59
+msgid "data-file error: "
msgstr ""
-#: src/list.q:152
+#: src/data-in.c:61
#, c-format
-msgid ""
-"The first case (%ld) specified precedes the last case (%ld) specified. The "
-"values will be swapped."
+msgid "(column %d"
msgstr ""
-#: src/list.q:160
+#: src/data-in.c:63
#, c-format
-msgid ""
-"The first case (%ld) to list is less than 1. The value is being reset to 1."
+msgid "(columns %d-%d"
msgstr ""
-#: src/list.q:166
+#: src/data-in.c:64
#, c-format
-msgid ""
-"The last case (%ld) to list is less than 1. The value is being reset to 1."
+msgid ", field type %s) "
msgstr ""
-#: src/list.q:172
-#, c-format
-msgid "The step value %ld is less than 1. The value is being reset to 1."
+#: src/data-in.c:210
+msgid "Field does not form a valid floating-point constant."
msgstr ""
-#: src/list.q:199
-msgid "`/FORMAT WEIGHT' specified, but weighting is not on."
+#: src/data-in.c:239
+msgid "Field contents followed by garbage."
msgstr ""
-#: src/list.q:259 src/html.c:402
-#, c-format
-msgid "Cannot open first page on HTML device %s."
+#: src/data-in.c:257
+msgid "Underflow in floating-point constant."
msgstr ""
-#: src/list.q:445
-msgid "Line"
+#: src/data-in.c:268
+msgid "Overflow in floating-point constant."
msgstr ""
-#: src/means.q:106
-msgid "Missing required subcommand TABLES."
+#: src/data-in.c:301
+msgid "All characters in field must be digits."
msgstr ""
-#: src/means.q:144
-msgid "TABLES or CROSSBREAK subcommand may not appear more than once."
+#: src/data-in.c:325
+msgid "Unrecognized character in field."
msgstr ""
-#: src/means.q:181
-#, c-format
-msgid ""
-"Variable %s specified on TABLES or CROSSBREAK, but not specified on "
-"VARIABLES."
+#: src/data-in.c:343 src/data-in.c:596
+msgid "Field must have even length."
msgstr ""
-#: src/means.q:195
-#, c-format
-msgid "LOWEST and HIGHEST may not be used for independent variables (%s)."
+#: src/data-in.c:353 src/data-in.c:606
+msgid "Field must contain only hex digits."
msgstr ""
-#: src/means.q:203
+#: src/data-in.c:392
#, c-format
msgid ""
-"Independent variables (%s) may not have noninteger endpoints in their ranges."
-msgstr ""
-
-#: src/means.q:236
-msgid "VARIABLES must precede TABLES."
+"Quality of zoned decimal (Z) input format code is suspect. Check your "
+"results three times. Report bugs to %s."
msgstr ""
-#: src/means.q:293
-#, c-format
-msgid "Upper value (%g) is less than lower value (%g) on VARIABLES subcommand."
+#: src/data-in.c:404
+msgid "Zoned decimal field contains fewer than 2 characters."
msgstr ""
-#: src/set.q:216 src/set.q:219 src/set.q:237 src/set.q:306 src/set.q:312
-#: src/set.q:320 src/set.q:327 src/set.q:329 src/set.q:348 src/set.q:352
-#: src/set.q:356 src/set.q:370 src/set.q:372 src/set.q:376 src/set.q:693
-#: src/set.q:774 src/set.q:855
-#, c-format
-msgid "%s is obsolete."
+#: src/data-in.c:412
+msgid "Bad sign byte in zoned decimal number."
msgstr ""
-#: src/set.q:223
-msgid "Active file compression is not yet implemented (and probably won't be)."
+#: src/data-in.c:432
+msgid "Format error in zoned decimal number."
msgstr ""
-#: src/set.q:232
-msgid "CPI must be greater than 0."
+#: src/data-in.c:446
+msgid "Error in syntax of zoned decimal number."
msgstr ""
-#: src/set.q:241
-msgid "LPI must be greater than 0."
+#: src/data-in.c:646
+msgid "Unexpected end of field."
msgstr ""
-#: src/set.q:248
-msgid ""
-"CASE is not implemented and probably won't be. If you care, complain about "
-"it."
+#: src/data-in.c:672
+msgid "Digit expected in field."
msgstr ""
-#: src/set.q:278
+#: src/data-in.c:697
#, c-format
-msgid "Value for MITERATE (%ld) must be greater than 0."
+msgid "Day (%ld) must be between 1 and 31."
msgstr ""
-#: src/set.q:286
-#, c-format
-msgid "Value for MNEST (%ld) must be greater than 0."
+#: src/data-in.c:722
+msgid "Delimiter expected between fields in date."
msgstr ""
-#: src/set.q:294
-msgid "MXERRS must be at least 1."
+#: src/data-in.c:755
+#, c-format
+msgid "Parse error at `%c' expecting %s."
msgstr ""
-#: src/set.q:301
-msgid "MXLOOPS must be at least 1."
+#: src/data-in.c:769
+#, c-format
+msgid "Unknown %s `%.*s'."
msgstr ""
-#: src/set.q:314
-msgid "TBFONTS not implemented."
+#: src/data-in.c:819
+#, c-format
+msgid "Month (%ld) must be between 1 and 12."
msgstr ""
-#: src/set.q:316
-msgid "TB1 not implemented."
+#: src/data-in.c:823
+msgid "month"
msgstr ""
-#: src/set.q:390
+#: src/data-in.c:837
#, c-format
-msgid ""
-"CC%c: Length of custom currency string `%s' (%d) exceeds maximum length of "
-"16."
+msgid "Year (%ld) must be between 1582 and 19999."
msgstr ""
-#: src/set.q:412
+#: src/data-in.c:848
#, c-format
-msgid ""
-"CC%c: Custom currency string `%s' does not contain exactly three periods or "
-"commas (not both)."
+msgid "Trailing garbage \"%s\" following date."
msgstr ""
-#: src/set.q:555
-msgid "LENGTH must be at least 1."
+#: src/data-in.c:863
+#, c-format
+msgid "Julian day (%d) must be between 1 and 366."
msgstr ""
-#: src/set.q:592
-msgid "Missing identifier in RESULTS subcommand."
+#: src/data-in.c:875
+#, c-format
+msgid "Year (%d) must be between 1582 and 19999."
msgstr ""
-#: src/set.q:603
-msgid "Unrecognized identifier in RESULTS subcommand."
+#: src/data-in.c:891
+#, c-format
+msgid "Quarter (%ld) must be between 1 and 4."
msgstr ""
-#: src/set.q:639
-msgid "WIDTH must be at least 1."
+#: src/data-in.c:901
+msgid "`Q' expected between quarter and year."
msgstr ""
-#: src/set.q:662
+#: src/data-in.c:917
#, c-format
-msgid ""
-"FORMAT requires numeric output format as an argument. Specified format %s "
-"is of type string."
+msgid "Week (%ld) must be between 1 and 53."
msgstr ""
-#: src/set.q:706
-msgid "Text color must be in range 0-15."
-msgstr "Text colour must be in range 0-15."
-
-#: src/set.q:719
-msgid "Background color must be in range 0-7."
-msgstr "Background colour must be in range 0-7."
-
-#: src/set.q:730
-msgid "Border color must be in range 0-7."
-msgstr "Border colour must be in range 0-7."
-
-#: src/set.q:786
-msgid "Lower window color must be between 0 and 6."
-msgstr "Lower window colour must be between 0 and 6."
-
-#: src/set.q:800
-msgid "Upper window color must be between 0 and 6."
-msgstr "Upper window colour must be between 0 and 6."
-
-#: src/set.q:812
-msgid "Frame color must be between 0 and 6."
-msgstr "Frame colour must be between 0 and 6."
+#: src/data-in.c:928
+msgid "`WK' expected between week and year."
+msgstr ""
-#: src/set.q:845
-msgid "VIEWLENGTH not implemented."
+#: src/data-in.c:950
+msgid "Delimiter expected between fields in time."
msgstr ""
-#: src/set.q:864
-msgid "Drive letter expected in WORKDEV subcommand."
+#: src/data-in.c:962
+#, c-format
+msgid "Hour (%ld) must be positive."
msgstr ""
-#: src/t-test.q:453
-msgid "expecting variable name in GROUPS subcommand"
+#: src/data-in.c:974
+#, c-format
+msgid "Minute (%ld) must be between 0 and 59."
msgstr ""
-#: src/t-test.q:458
+#: src/data-in.c:1021
#, c-format
-msgid "Long string variable %s is not valid here."
+msgid "Hour (%ld) must be between 0 and 23."
msgstr ""
-#: src/t-test.q:474
-msgid ""
-"When applying GROUPS to a string variable, at least one value must be "
-"specified."
+#: src/data-in.c:1049
+msgid "weekday"
msgstr ""
-#: src/t-test.q:565
+#: src/data-in.c:1378
#, c-format
-msgid ""
-"PAIRED was specified but the number of variables preceding WITH (%d) did not "
-"match the number following (%d)."
+msgid "Field too long (%d characters). Truncated after character %d."
msgstr ""
-#: src/t-test.q:581
-msgid "At least two variables must be specified on PAIRS."
+#: src/data-list.c:141
+msgid ""
+"DATA LIST may not use a different file from that specified on its "
+"surrounding FILE TYPE."
msgstr ""
-#: src/aggregate.c:188
-msgid "OUTFILE specified multiple times."
+#: src/data-list.c:160
+msgid "The END subcommand may only be specified once."
msgstr ""
-#: src/aggregate.c:214
-msgid "while expecting COLUMNWISE"
+#: src/data-list.c:195
+msgid "Only one of FIXED, FREE, or LIST may be specified."
msgstr ""
-#: src/aggregate.c:229
-msgid "BREAK specified multiple times."
+#: src/data-list.c:351 src/print.c:296
+#, c-format
+msgid ""
+"The record number specified, %ld, is before the previous record, %d. Data "
+"fields must be listed in order of increasing record number."
msgstr ""
-#: src/aggregate.c:258
-msgid "BREAK subcommand not specified."
+#: src/data-list.c:380 src/data-list.c:1729
+msgid ""
+"SPSS-like or FORTRAN-like format specification expected after variable names."
msgstr ""
-#: src/aggregate.c:494
-msgid "expecting aggregation function"
+#: src/data-list.c:391
+msgid "At least one variable must be specified."
msgstr ""
-#: src/aggregate.c:510
-#, c-format
-msgid "Unknown aggregation function %s."
+#: src/data-list.c:396 src/print.c:328
+msgid ""
+"Variables are specified on records that should not exist according to "
+"RECORDS subcommand."
msgstr ""
-#: src/aggregate.c:525
-msgid "expecting `('"
+#: src/data-list.c:429 src/data-list.c:443 src/print.c:520 src/print.c:533
+msgid "Column positions for fields must be positive."
msgstr ""
-#: src/aggregate.c:560
-#, c-format
-msgid "Missing argument %d to %s."
+#: src/data-list.c:448
+msgid "The ending column for a field must be greater than the starting column."
msgstr ""
-#: src/aggregate.c:568
+#: src/data-list.c:462 src/print.c:610
#, c-format
-msgid "Arguments to %s must be of same type as source variables."
+msgid "The %d columns %d-%d can't be evenly divided into %d fields."
msgstr ""
-#: src/aggregate.c:578 src/expr-prs.c:664
-msgid "expecting `)'"
+#: src/data-list.c:482 src/print.c:561
+msgid "A format specifier on this line has extra characters on the end."
msgstr ""
-#: src/aggregate.c:590 src/autorecode.c:110
-#, c-format
-msgid ""
-"Number of source variables (%d) does not match number of target variables (%"
-"d)."
+#: src/data-list.c:497 src/print.c:577
+msgid "The value for number of decimal places must be at least 1."
msgstr ""
-#: src/aggregate.c:657
+#: src/data-list.c:511 src/print.c:590
#, c-format
-msgid ""
-"Variable name %s is not unique within the aggregate file dictionary, which "
-"contains the aggregate variables and the break variables."
+msgid "Input format %s doesn't accept decimal places."
msgstr ""
-#: src/apply-dict.c:68
+#: src/data-list.c:558 src/data-list.c:654 src/data-list.c:870
#, c-format
-msgid "Variable %s is %s in target file, but %s in source file."
+msgid "%s is a duplicate variable name."
msgstr ""
-#: src/apply-dict.c:71 src/apply-dict.c:72 src/expr-prs.c:1127
-#: src/expr-prs.c:1472 src/expr-prs.c:1488 src/formats.c:103
-#: src/pfm-read.c:636 src/print.c:700 src/sfm-read.c:916 src/sfm-read.c:1042
-#: src/sfm-read.c:1043
-msgid "string"
+#: src/data-list.c:563
+#, c-format
+msgid "There is already a variable %s of a different type."
msgstr ""
-#: src/apply-dict.c:71 src/apply-dict.c:72 src/expr-prs.c:1127
-#: src/expr-prs.c:1469 src/expr-prs.c:1486 src/formats.c:103
-#: src/pfm-read.c:636 src/print.c:700 src/sfm-read.c:916 src/sfm-read.c:1042
-#: src/sfm-read.c:1043
-msgid "numeric"
+#: src/data-list.c:570
+#, c-format
+msgid "There is already a string variable %s of a different width."
msgstr ""
-#: src/apply-dict.c:84
-#, c-format
-msgid "Cannot add value labels from source file to long string variable %s."
+#: src/data-list.c:645
+msgid ""
+"The number of format specifications exceeds the given number of variable "
+"names."
msgstr ""
-#: src/apply-dict.c:130
-#, c-format
+#: src/data-list.c:758 src/print.c:765
msgid ""
-"Cannot apply missing values from source file to long string variable %s."
+"There aren't enough format specifications to match the number of variable "
+"names given."
msgstr ""
-#: src/apply-dict.c:163
-msgid "No matching variables found between the source and target files."
+#: src/data-list.c:785 src/data-list.c:911 src/descript.c:879 src/print.c:796
+#: src/sysfile-info.c:134 src/sysfile-info.c:367 src/vfm.c:809
+msgid "Variable"
msgstr ""
-#: src/ascii.c:218
-#, c-format
-msgid "ASCII driver initializing as `%s'..."
+#: src/data-list.c:786 src/print.c:797
+msgid "Record"
msgstr ""
-#: src/ascii.c:276
-#, c-format
-msgid ""
-"ascii driver: Area of page excluding margins and headers must be at least 59 "
-"characters wide by 15 lines long. Page as configured is only %d characters "
-"by %d lines."
+#: src/data-list.c:787 src/print.c:798
+msgid "Columns"
msgstr ""
-#: src/ascii.c:381 src/html.c:102 src/postscript.c:458
-#, c-format
-msgid "%s: Initialization complete."
+#: src/data-list.c:788 src/data-list.c:912 src/print.c:799
+msgid "Format"
msgstr ""
-#: src/ascii.c:392 src/html.c:114 src/postscript.c:471
+#: src/data-list.c:804
#, c-format
-msgid "%s: Beginning closing..."
-msgstr ""
+msgid "Reading %d record from file %s."
+msgid_plural "Reading %d records from file %s."
+msgstr[0] ""
+msgstr[1] ""
-#: src/ascii.c:402 src/html.c:119 src/postscript.c:490
+#: src/data-list.c:808
#, c-format
-msgid "%s: Finished closing."
-msgstr ""
+msgid "Reading %d record from the command file."
+msgid_plural "Reading %d records from the command file."
+msgstr[0] ""
+msgstr[1] ""
-#: src/ascii.c:464
+#: src/data-list.c:928
#, c-format
-msgid ""
-"Bad index value for `box' key: syntax is box[INDEX], 0 <= INDEX < %d "
-"decimal, with INDEX expressed in base 4."
+msgid "Reading free-form data from file %s."
msgstr ""
-#: src/ascii.c:470
-#, c-format
-msgid "Duplicate value for key `%s'."
+#: src/data-list.c:931
+msgid "Reading free-form data from the command file."
msgstr ""
-#: src/ascii.c:479
+#: src/data-list.c:982
#, c-format
-msgid "Unknown configuration parameter `%s' for ascii device driver."
+msgid "Quoted string missing terminating `%c'."
msgstr ""
-#: src/ascii.c:492
+#: src/data-list.c:1091
#, c-format
-msgid ""
-"Unknown character set `%s'. Valid character sets are `ascii' and `latin1'."
+msgid "Partial case of %d of %d records discarded."
msgstr ""
-#: src/ascii.c:501
+#: src/data-list.c:1145
#, c-format
-msgid ""
-"Unknown overstrike style `%s'. Valid overstrike styles are `single' and "
-"`line'."
+msgid "Partial case discarded. The first variable missing was %s."
msgstr ""
-#: src/ascii.c:510
+#: src/data-list.c:1189
#, c-format
msgid ""
-"Unknown carriage return style `%s'. Valid carriage return styles are `cr' "
-"and `bs'."
+"Missing value(s) for all variables from %s onward. These will be filled "
+"with the system-missing value or blanks, as appropriate."
msgstr ""
-#: src/ascii.c:522 src/postscript.c:680
-#, c-format
-msgid "Positive integer required as value for `%s'."
+#: src/data-list.c:1267
+msgid "Attempt to read past end of file."
msgstr ""
-#: src/ascii.c:553
-#, c-format
-msgid "Zero or positive integer required as value for `%s'."
+#: src/data-list.c:1403
+msgid ""
+"REPEATING DATA must use the same file as its corresponding DATA LIST or FILE "
+"TYPE."
msgstr ""
-#: src/ascii.c:623 src/postscript.c:639
+#: src/data-list.c:1413 src/data-list.c:1448 src/data-list.c:1461
+#: src/data-list.c:1474 src/data-list.c:1507
#, c-format
-msgid "Boolean value expected for %s."
+msgid "%s subcommand given multiple times."
msgstr ""
-#: src/ascii.c:655 src/ascii.c:670 src/ascii.c:687
+#: src/data-list.c:1437
#, c-format
-msgid "ASCII output driver: %s: %s"
+msgid "STARTS beginning column (%d) exceeds STARTS ending column (%d)."
msgstr ""
-#: src/ascii.c:756
+#: src/data-list.c:1493
#, c-format
-msgid "ascii_line_horz: bad hline (%d,%d),%d out of (%d,%d)\n"
+msgid "CONTINUED beginning column (%d) exceeds CONTINUED ending column (%d)."
msgstr ""
-#: src/ascii.c:790
+#: src/data-list.c:1516
#, c-format
-msgid "ascii_line_vert: bad vline %d,(%d,%d) out of (%d,%d)\n"
+msgid "ID beginning column (%ld) must be positive."
msgstr ""
-#: src/ascii.c:820
+#: src/data-list.c:1531
#, c-format
-msgid "ascii_line_intersection: bad intsct (%d,%d) out of (%d,%d)\n"
+msgid "ID ending column (%ld) must be positive."
msgstr ""
-#: src/ascii.c:968
+#: src/data-list.c:1537
#, c-format
-msgid "%s: horiz=%d, vert=%d\n"
+msgid "ID ending column (%ld) cannot be less than ID beginning column (%d)."
msgstr ""
-#: src/ascii.c:1140
-#, c-format
-msgid "Writing `%s': %s"
+#: src/data-list.c:1577
+msgid "Missing required specification STARTS."
msgstr ""
-#: src/ascii.c:1541 src/postscript.c:2095
-#, c-format
-msgid "%s - Page %d"
+#: src/data-list.c:1579
+msgid "Missing required specification OCCURS."
msgstr ""
-#: src/autorecode.c:131
-#, c-format
-msgid "Target variable %s duplicates existing variable %s."
+#: src/data-list.c:1586
+msgid "ID specified without CONTINUED."
msgstr ""
-#: src/autorecode.c:138
-#, c-format
-msgid "Duplicate variable name %s among target variables."
+#: src/data-list.c:1678
+msgid "String variable not allowed here."
msgstr ""
-#: src/cmdline.c:112 src/cmdline.c:131 src/cmdline.c:143 src/command.c:196
+#: src/data-list.c:1688
#, c-format
-msgid "%s is not yet implemented."
-msgstr ""
-
-#: src/cmdline.c:157
-msgid ""
-"\n"
-"Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.\n"
-"This is free software; see the source for copying conditions. There is NO\n"
-"WARRANTY; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
-"\n"
-"Written by Ben Pfaff <blp@gnu.org>."
+msgid "%s (%d) must be at least 1."
msgstr ""
-#: src/cmdline.c:217
+#: src/data-list.c:1694
#, c-format
-msgid ""
-"PSPP, a program for statistical analysis of sample data.\n"
-"\n"
-"Usage: %s [OPTION]... FILE...\n"
-"\n"
-"If a long option shows an argument as mandatory, then it is mandatory\n"
-"for the equivalent short option also. Similarly for optional arguments.\n"
-"\n"
-"Configuration:\n"
-" -B, --config-dir=DIR set configuration directory to DIR\n"
-" -o, --device=DEVICE select output driver DEVICE and disable "
-"defaults\n"
-" -d, --define=VAR[=VALUE] set environment variable VAR to VALUE, or empty\n"
-" -u, --undef=VAR undefine environment variable VAR\n"
-"\n"
-"Input and output:\n"
-" -f, --out-file=FILE send output to FILE (overwritten)\n"
-" -p, --pipe read script from stdin, send output to stdout\n"
-" -I-, --no-include clear include path\n"
-" -I, --include=DIR append DIR to include path\n"
-" -c, --command=COMMAND execute COMMAND before .pspp/rc at startup\n"
-"\n"
-"Language modifiers:\n"
-" -i, --interactive interpret scripts in interactive mode\n"
-" -n, --edit just check syntax; don't actually run the code\n"
-" -r, --no-statrc disable execution of .pspp/rc at startup\n"
-" -s, --safer don't allow some unsafe operations\n"
-"\n"
-"Informative output:\n"
-" -h, --help print this help, then exit\n"
-" -l, --list print a list of known driver classes, then exit\n"
-" -V, --version show PSPP version, then exit\n"
-" -v, --verbose increments verbosity level\n"
-"\n"
-"Non-option arguments:\n"
-" FILE1 FILE2 run FILE1, clear the dictionary, run FILE2\n"
-" FILE1 + FILE2 run FILE1 then FILE2 without clearing "
-"dictionary\n"
-" KEY=VALUE overrides macros in output initialization file\n"
-"\n"
+msgid "Variable or integer expected for %s."
msgstr ""
-#: src/cmdline.c:249
+#: src/data-list.c:1827
#, c-format
-msgid ""
-"\n"
-"Report bugs to <%s>.\n"
+msgid "Encountered mismatched record ID \"%s\" expecting \"%s\"."
msgstr ""
-#: src/command.c:134
+#: src/data-list.c:1859
#, c-format
-msgid "%s not allowed inside FILE TYPE/END FILE TYPE."
+msgid ""
+"Variable %s starting in column %d extends beyond physical record length of %"
+"d."
msgstr ""
-#: src/command.c:138
+#: src/data-list.c:1927
#, c-format
-msgid "%s not allowed inside FILE TYPE GROUPED/END FILE TYPE."
-msgstr ""
-
-#: src/command.c:141
-msgid "RECORD TYPE must be the first command inside a FILE TYPE structure."
+msgid "Invalid value %d for OCCURS."
msgstr ""
-#: src/command.c:186
-msgid "This line does not begin with a valid command name."
+#: src/data-list.c:1933
+#, c-format
+msgid "Beginning column for STARTS (%d) must be at least 1."
msgstr ""
-#: src/command.c:214
+#: src/data-list.c:1941
#, c-format
-msgid ""
-"%s is not allowed (1) before a command to specify the input program, such as "
-"DATA LIST, (2) between FILE TYPE and END FILE TYPE, (3) between INPUT "
-"PROGRAM and END INPUT PROGRAM."
+msgid "Ending column for STARTS (%d) is less than beginning column (%d)."
msgstr ""
-#: src/command.c:218
+#: src/data-list.c:1949
#, c-format
-msgid "%s is not allowed within an input program."
+msgid "Invalid value %d for LENGTH."
msgstr ""
-#: src/command.c:219 src/command.c:220
+#: src/data-list.c:1956
#, c-format
-msgid "%s is only allowed within an input program."
+msgid "Beginning column for CONTINUED (%d) must be at least 1."
msgstr ""
-#: src/command.c:229
+#: src/data-list.c:1964
#, c-format
-msgid "%s command beginning\n"
+msgid "Ending column for CONTINUED (%d) is less than beginning column (%d)."
msgstr ""
-#: src/command.c:265
+#: src/data-list.c:1996
#, c-format
msgid ""
-"%s command completed\n"
-"\n"
+"Number of repetitions specified on OCCURS (%d) exceed number of repetitions "
+"available in space on STARTS (%d), and CONTINUED not specified."
msgstr ""
-#: src/command.c:280
-msgid "The identifier(s) specified do not form a valid command name:"
+#: src/data-list.c:2014
+#, c-format
+msgid "Unexpected end of file with %d repetitions remaining out of %d."
msgstr ""
-#: src/command.c:283
-msgid "The identifier(s) specified do not form a complete command name:"
+#: src/data-out.c:235 src/sfm-read.c:534 src/sysfile-info.c:115
+msgid "Unknown"
msgstr ""
-#: src/command.c:407
+#: src/data-out.c:343
msgid ""
-"This command is not accepted in a syntax file. Instead, use FINISH to "
-"terminate a syntax file."
+"The N output format cannot be used to output a negative number or the system-"
+"missing value."
msgstr ""
-#: src/command.c:425
+#: src/data-out.c:454
+#, c-format
msgid ""
-"This command is not executed in interactive mode. Instead, PSPP drops down "
-"to the command prompt. Use EXIT if you really want to quit."
-msgstr ""
-
-#: src/command.c:516
-msgid "The sentinel may not be the empty string."
+"Quality of zoned decimal (Z) output format code is suspect. Check your "
+"results. Report bugs to %s."
msgstr ""
-#: src/command.c:573
-msgid "This command not allowed when the SAFER option is set."
+#: src/data-out.c:462
+msgid "The system-missing value cannot be output as a zoned decimal number."
msgstr ""
-#: src/command.c:596
+#: src/data-out.c:475
#, c-format
-msgid "Error removing `%s': %s."
+msgid "Number %g too big to fit in field with format Z%d.%d."
msgstr ""
-#: src/command.c:646
+#: src/data-out.c:869
#, c-format
-msgid "Couldn't fork: %s."
+msgid "Time value %g too large in magnitude to convert to alphanumeric time."
msgstr ""
-#: src/command.c:687
+#: src/data-out.c:920
#, c-format
-msgid "Error executing command: %s."
-msgstr ""
-
-#: src/command.c:733
-msgid "No operating system support for this command."
+msgid "Weekday index %f does not lie between 1 and 7."
msgstr ""
-#: src/command.c:762
-msgid "This command is not valid in a syntax file."
-msgstr ""
-
-#: src/compute.c:141 src/compute.c:200
+#: src/data-out.c:940
#, c-format
-msgid ""
-"When executing COMPUTE: SYSMIS is not a valid value as an index into vector %"
-"s."
+msgid "Month index %f does not lie between 1 and 12."
msgstr ""
-#: src/compute.c:144 src/compute.c:204
+#: src/data-out.c:1053
#, c-format
msgid ""
-"When executing COMPUTE: %g is not a valid value as an index into vector %s."
+"Year %d cannot be represented in four digits for output formatting purposes."
msgstr ""
-#: src/compute.c:343
-#, c-format
-msgid "There is no vector named %s."
+#: src/date.c:32
+msgid "Only USE ALL is currently implemented."
msgstr ""
-#: src/compute.c:449
-msgid "Extra characters after expression."
+#: src/descript.c:99 src/examine.q:1466 src/frequencies.q:112 src/oneway.q:394
+#: src/t-test.q:676 src/t-test.q:699 src/t-test.q:822 src/t-test.q:1159
+msgid "Mean"
msgstr ""
-#: src/count.c:172
-msgid "Destination cannot be a string variable."
+#: src/descript.c:100
+msgid "S E Mean"
msgstr ""
-#: src/count.c:286
-#, c-format
-msgid ""
-"%g THRU %g is not a valid range. The number following THRU must be at least "
-"as big as the number preceding THRU."
+#: src/descript.c:101 src/frequencies.q:116
+msgid "Std Dev"
msgstr ""
-#: src/data-in.c:69
-msgid "data-file error: "
+#: src/descript.c:102 src/examine.q:1546 src/frequencies.q:117
+msgid "Variance"
msgstr ""
-#: src/data-in.c:71
-#, c-format
-msgid "(column %d"
+#: src/descript.c:103 src/examine.q:1653 src/frequencies.q:118
+msgid "Kurtosis"
msgstr ""
-#: src/data-in.c:73
-#, c-format
-msgid "(columns %d-%d"
+#: src/descript.c:104
+msgid "S E Kurt"
msgstr ""
-#: src/data-in.c:74
-#, c-format
-msgid ", field type %s) "
+#: src/descript.c:105 src/examine.q:1633 src/frequencies.q:120
+msgid "Skewness"
msgstr ""
-#: src/data-in.c:223
-msgid "Field contents followed by garbage."
+#: src/descript.c:106
+msgid "S E Skew"
msgstr ""
-#: src/data-in.c:256
-msgid "Overflow in floating-point constant."
+#: src/descript.c:107 src/examine.q:1594 src/frequencies.q:122
+msgid "Range"
msgstr ""
-#: src/data-in.c:262
-msgid "Underflow in floating-point constant."
+#: src/descript.c:108 src/examine.q:1571 src/frequencies.q:123
+#: src/oneway.q:406
+msgid "Minimum"
msgstr ""
-#: src/data-in.c:268
-msgid "Field does not form a valid floating-point constant."
+#: src/descript.c:109 src/examine.q:1582 src/frequencies.q:124
+#: src/oneway.q:407
+msgid "Maximum"
msgstr ""
-#: src/data-in.c:294
-msgid "All characters in field must be digits."
+#: src/descript.c:110 src/frequencies.q:125
+msgid "Sum"
msgstr ""
-#: src/data-in.c:319
-msgid "Unrecognized character in field."
+#: src/descript.c:333
+#, c-format
+msgid "Z-score variable name %s would be a duplicate variable name."
msgstr ""
-#: src/data-in.c:337 src/data-in.c:587
-msgid "Field must have even length."
+#: src/descript.c:351 src/list.q:142
+msgid "No variables specified."
msgstr ""
-#: src/data-in.c:347 src/data-in.c:597
-msgid "Field must contain only hex digits."
+#: src/descript.c:435
+msgid "expecting statistic name: reverting to default"
msgstr ""
-#: src/data-in.c:385
-#, c-format
+#: src/descript.c:507
msgid ""
-"Quality of zoned decimal (Z) input format code is suspect. Check your "
-"results three times. Report bugs to %s."
+"Ran out of generic names for Z-score variables. There are only 126 generic "
+"names: ZSC001-ZSC0999, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09."
msgstr ""
-#: src/data-in.c:397
-msgid "Zoned decimal field contains fewer than 2 characters."
+#: src/descript.c:538
+msgid "Mapping of variables to corresponding Z-scores."
msgstr ""
-#: src/data-in.c:405
-msgid "Bad sign byte in zoned decimal number."
+#: src/descript.c:543
+msgid "Source"
msgstr ""
-#: src/data-in.c:422
-msgid "Format error in zoned decimal number."
+#: src/descript.c:544
+msgid "Target"
msgstr ""
-#: src/data-in.c:436
-msgid "Error in syntax of zoned decimal number."
+#: src/descript.c:663 src/descript.c:669
+msgid "Z-score of "
msgstr ""
-#: src/data-in.c:637
-msgid "Unexpected end of field."
+#: src/descript.c:882
+msgid "Valid N"
msgstr ""
-#: src/data-in.c:663
-msgid "Digit expected in field."
+#: src/descript.c:883
+msgid "Missing N"
msgstr ""
-#: src/data-in.c:688
+#: src/descript.c:909
#, c-format
-msgid "Day (%ld) must be between 1 and 31."
+msgid "Valid cases = %g; cases with missing value(s) = %g."
msgstr ""
-#: src/data-in.c:713
-msgid "Delimiter expected between fields in date."
+#: src/devind.c:136
+#, c-format
+msgid "DEVIND driver initializing as `%s'..."
msgstr ""
-#: src/data-in.c:810
+#: src/devind.c:218
#, c-format
-msgid "Month (%ld) must be between 1 and 12."
+msgid "Unknown configuration parameter `%s' for DEVIND device driver."
msgstr ""
-#: src/data-in.c:851
+#: src/devind.c:240
#, c-format
-msgid "Month (%s) must be between I and XII."
+msgid "DEVIND output driver: %s: %s"
msgstr ""
-#: src/data-in.c:878
+#: src/devind.c:271
#, c-format
-msgid "Month name (%s...) is too long."
+msgid "Cannot open first page on DEVIND device %s."
msgstr ""
-#: src/data-in.c:889
+#: src/dfm-read.c:153
#, c-format
-msgid "Bad month name (%s)."
+msgid "Could not open \"%s\" for reading as a data file: %s."
+msgstr ""
+
+#: src/dfm-read.c:186 src/dfm-read.c:204
+msgid "BEGIN DATA expected."
+msgstr ""
+
+#: src/dfm-read.c:213
+msgid ""
+"Unexpected end-of-file while reading data in BEGIN DATA. This probably "
+"indicates a missing or misformatted END DATA command. END DATA must appear "
+"by itself on a single line with exactly one space between words."
msgstr ""
-#: src/data-in.c:905
+#: src/dfm-read.c:246 src/dfm-read.c:266
#, c-format
-msgid "Year (%ld) must be between 1582 and 19999."
+msgid "Error reading file %s: %s."
msgstr ""
-#: src/data-in.c:916
+#: src/dfm-read.c:269
#, c-format
-msgid "Trailing garbage \"%s\" following date."
+msgid "%s: Partial record at end of file."
msgstr ""
-#: src/data-in.c:931
+#: src/dfm-read.c:312
#, c-format
-msgid "Julian day (%d) must be between 1 and 366."
+msgid "Attempt to read beyond end-of-file on file %s."
+msgstr ""
+
+#: src/dfm-read.c:315
+msgid "Attempt to read beyond END DATA."
+msgstr ""
+
+#: src/dfm-read.c:462
+msgid ""
+"This command is not valid here since the current input program does not "
+"access the inline file."
msgstr ""
-#: src/data-in.c:943
+#: src/dfm-write.c:67
#, c-format
-msgid "Year (%d) must be between 1582 and 19999."
+msgid "An error occurred while opening \"%s\" for writing as a data file: %s."
msgstr ""
-#: src/data-in.c:959
+#: src/dfm-write.c:103
#, c-format
-msgid "Quarter (%ld) must be between 1 and 4."
+msgid "Error writing file %s: %s."
msgstr ""
-#: src/data-in.c:969
-msgid "`Q' expected between quarter and year."
+#: src/dictionary.c:689
+msgid ""
+"At least one case in the data file had a weight value that was user-missing, "
+"system-missing, zero, or negative. These case(s) were ignored."
msgstr ""
-#: src/data-in.c:985
-#, c-format
-msgid "Week (%ld) must be between 1 and 53."
+#: src/do-if.c:113
+msgid "There is no DO IF to match with this ELSE IF."
msgstr ""
-#: src/data-in.c:996
-msgid "`WK' expected between week and year."
+#: src/do-if.c:118
+msgid "The ELSE command must follow all ELSE IF commands in a DO IF structure."
msgstr ""
-#: src/data-in.c:1019
-msgid "Delimiter expected between fields in time."
+#: src/do-if.c:141
+msgid "End of command expected."
+msgstr ""
+
+#: src/do-if.c:157
+msgid "There is no DO IF to match with this ELSE."
+msgstr ""
+
+#: src/do-if.c:163
+msgid ""
+"There may be at most one ELSE clause in each DO IF structure. It must be "
+"the last clause."
+msgstr ""
+
+#: src/do-if.c:198
+msgid "There is no DO IF to match with this END IF."
msgstr ""
-#: src/data-in.c:1031
+#: src/do-if.c:284
#, c-format
-msgid "Hour (%ld) must be positive."
+msgid "DO IF %d: true\n"
msgstr ""
-#: src/data-in.c:1043
+#: src/do-if.c:289
#, c-format
-msgid "Minute (%ld) must be between 0 and 59."
+msgid "DO IF %d: false\n"
msgstr ""
-#: src/data-in.c:1090
+#: src/do-if.c:294
#, c-format
-msgid "Hour (%ld) must be between 0 and 23."
+msgid "DO IF %d: missing\n"
msgstr ""
-#: src/data-in.c:1104 src/data-in.c:1139
-msgid "Day of the week expected in date value."
+#: src/error.c:93
+msgid "Terminating NOW due to a fatal error!"
msgstr ""
-#: src/data-in.c:1190
-msgid "Date is not in valid range between 15 Oct 1582 and 31 Dec 19999."
+#: src/error.c:170
+msgid "Terminating execution of syntax file due to error."
msgstr ""
-#: src/data-in.c:1512
+#: src/error.c:172
#, c-format
-msgid "Field too long (%d characters). Truncated after character %d."
+msgid "Errors (%d) exceeds limit (%d)."
msgstr ""
-#: src/data-list.c:137
-msgid ""
-"DATA LIST may not use a different file from that specified on its "
-"surrounding FILE TYPE."
+#: src/error.c:175
+#, c-format
+msgid "Warnings (%d) exceed limit (%d)."
msgstr ""
-#: src/data-list.c:156
-msgid "The END subcommand may only be specified once."
+#: src/error.c:237
+msgid "fatal"
msgstr ""
-#: src/data-list.c:195
-msgid "Only one of FIXED, FREE, or LIST may be specified."
+#: src/error.c:239 src/error.c:246 src/error.c:249
+msgid "error"
+msgstr ""
+
+#: src/error.c:240 src/error.c:247 src/error.c:250
+msgid "warning"
+msgstr ""
+
+#: src/error.c:241 src/error.c:251
+msgid "note"
msgstr ""
-#: src/data-list.c:321 src/print.c:301
+#: src/error.c:243 src/error.c:244
+msgid "installation error"
+msgstr ""
+
+#: src/filename.c:221
#, c-format
-msgid ""
-"The record number specified, %ld, is before the previous record, %d. Data "
-"fields must be listed in order of increasing record number."
+msgid "Searching for `%s'..."
msgstr ""
-#: src/data-list.c:353 src/data-list.c:1634
-msgid ""
-"SPSS-like or FORTRAN-like format specification expected after variable names."
+#: src/filename.c:229 src/filename.c:261
+msgid "Search unsuccessful!"
msgstr ""
-#: src/data-list.c:364 src/print.c:333
-msgid ""
-"Variables are specified on records that should not exist according to "
-"RECORDS subcommand."
+#: src/filename.c:254
+#, c-format
+msgid "Found `%s'."
msgstr ""
-#: src/data-list.c:396 src/data-list.c:409 src/print.c:510 src/print.c:523
-msgid "Column positions for fields must be positive."
+#: src/filename.c:686
+#, c-format
+msgid "Not opening pipe file `%s' because SAFER option set."
msgstr ""
-#: src/data-list.c:414
-msgid "The ending column for a field must be greater than the starting column."
+#: src/file-type.c:129
+msgid "MIXED, GROUPED, or NESTED expected."
msgstr ""
-#: src/data-list.c:438 src/print.c:551
-msgid "A format specifier on this line has extra characters on the end."
+#: src/file-type.c:152
+msgid "The CASE subcommand is not valid on FILE TYPE MIXED."
msgstr ""
-#: src/data-list.c:453 src/print.c:567
-msgid "The value for number of decimal places must be at least 1."
+#: src/file-type.c:170
+msgid "WARN or NOWARN expected after WILD."
msgstr ""
-#: src/data-list.c:467 src/print.c:580
-#, c-format
-msgid "Input format %s doesn't accept decimal places."
+#: src/file-type.c:178
+msgid "The DUPLICATE subcommand is not valid on FILE TYPE MIXED."
msgstr ""
-#: src/data-list.c:488 src/print.c:600
-#, c-format
-msgid "The %d columns %d-%d can't be evenly divided into %d fields."
+#: src/file-type.c:192
+msgid "DUPLICATE=CASE is only valid on FILE TYPE NESTED."
msgstr ""
-#: src/data-list.c:528 src/data-list.c:625 src/data-list.c:825
+#: src/file-type.c:201
#, c-format
-msgid "%s is a duplicate variable name."
+msgid "WARN%s expected after DUPLICATE."
msgstr ""
-#: src/data-list.c:533
-#, c-format
-msgid "There is already a variable %s of a different type."
+#: src/file-type.c:202
+msgid ", NOWARN, or CASE"
msgstr ""
-#: src/data-list.c:540
-#, c-format
-msgid "There is already a string variable %s of a different width."
+#: src/file-type.c:203
+msgid " or NOWARN"
msgstr ""
-#: src/data-list.c:614 src/print.c:689
-msgid ""
-"The number of format specifications exceeds the number of variable names "
-"given."
+#: src/file-type.c:211
+msgid "The MISSING subcommand is not valid on FILE TYPE MIXED."
msgstr ""
-#: src/data-list.c:698 src/print.c:773
-msgid ""
-"There aren't enough format specifications to match the number of variable "
-"names given."
+#: src/file-type.c:223
+msgid "WARN or NOWARN after MISSING."
msgstr ""
-#: src/data-list.c:733 src/print.c:806
-msgid "Record"
+#: src/file-type.c:231
+msgid "ORDERED is only valid on FILE TYPE GROUPED."
msgstr ""
-#: src/data-list.c:734 src/print.c:807
-msgid "Columns"
+#: src/file-type.c:242
+msgid "YES or NO expected after ORDERED."
msgstr ""
-#: src/data-list.c:735 src/data-list.c:870 src/print.c:808
-msgid "Format"
+#: src/file-type.c:248 src/file-type.c:543
+msgid "while expecting a valid subcommand"
msgstr ""
-#: src/data-list.c:758
-#, c-format
-msgid "Reading %d record from file %s."
-msgid_plural "Reading %d records from file %s."
-msgstr[0] ""
-msgstr[1] ""
+#: src/file-type.c:255
+msgid "The required RECORD subcommand was not present."
+msgstr ""
-#: src/data-list.c:761
-#, c-format
-msgid "Reading %d record from the command file."
-msgid_plural "Reading %d records from the command file."
-msgstr[0] ""
-msgstr[1] ""
+#: src/file-type.c:263
+msgid "The required CASE subcommand was not present."
+msgstr ""
-#: src/data-list.c:768 src/data-list.c:769
-msgid "Occurrence data specifications."
+#: src/file-type.c:269
+msgid "CASE and RECORD must specify different variable names."
msgstr ""
-#: src/data-list.c:893
-#, c-format
-msgid "Reading free-form data from file %s."
+#: src/file-type.c:327
+msgid "Column value must be positive."
msgstr ""
-#: src/data-list.c:894
-msgid "Reading free-form data from the command file."
+#: src/file-type.c:343
+msgid "Ending column precedes beginning column."
msgstr ""
-#: src/data-list.c:945 src/matrix-data.c:939
-msgid "Scope of string exceeds line."
+#: src/file-type.c:363
+msgid "Bad format specifier name."
msgstr ""
-#: src/data-list.c:1006
-msgid "Attempt to read past end of file."
+#: src/file-type.c:392 src/file-type.c:580
+msgid ""
+"This command may only appear within a FILE TYPE/END FILE TYPE structure."
msgstr ""
-#: src/data-list.c:1035
-msgid "abort in write_case()\n"
+#: src/file-type.c:415
+msgid "OTHER may appear only on the last RECORD TYPE command."
msgstr ""
-#: src/data-list.c:1063
-#, c-format
-msgid "Partial case of %d of %d records discarded."
+#: src/file-type.c:425
+msgid "No input commands (DATA LIST, REPEATING DATA) for above RECORD TYPE."
msgstr ""
-#: src/data-list.c:1112
-#, c-format
-msgid "Partial case discarded. The first variable missing was %s."
+#: src/file-type.c:476
+msgid ""
+"The CASE subcommand is not allowed on the RECORD TYPE command for FILE TYPE "
+"MIXED."
msgstr ""
-#: src/data-list.c:1153
-#, c-format
+#: src/file-type.c:486
msgid ""
-"Missing value(s) for all variables from %s onward. These will be filled "
-"with the system-missing value or blanks, as appropriate."
+"No variable name may be specified for the CASE subcommand on RECORD TYPE."
msgstr ""
-#: src/data-list.c:1311
+#: src/file-type.c:494
msgid ""
-"REPEATING DATA must use the same file as its corresponding DATA LIST or FILE "
+"The CASE column specification on RECORD TYPE must give a format specifier "
+"that is the same type as that of the CASE column specification given on FILE "
"TYPE."
msgstr ""
-#: src/data-list.c:1321
-msgid "STARTS subcommand given multiple times."
+#: src/file-type.c:510
+msgid "WARN or NOWARN expected on DUPLICATE subcommand."
msgstr ""
-#: src/data-list.c:1345
-#, c-format
-msgid "STARTS beginning column (%d) exceeds STARTS ending column (%d)."
+#: src/file-type.c:524
+msgid "WARN or NOWARN expected on MISSING subcommand."
msgstr ""
-#: src/data-list.c:1356
-msgid "OCCURS subcommand given multiple times."
+#: src/file-type.c:537
+msgid "YES or NO expected on SPREAD subcommand."
msgstr ""
-#: src/data-list.c:1369
-msgid "LENGTH subcommand given multiple times."
+#: src/file-type.c:593
+msgid "No input commands (DATA LIST, REPEATING DATA) on above RECORD TYPE."
msgstr ""
-#: src/data-list.c:1382
-msgid "CONTINUED subcommand given multiple times."
+#: src/file-type.c:600
+msgid "No commands between FILE TYPE and END FILE TYPE."
msgstr ""
-#: src/data-list.c:1401
+#: src/file-type.c:669
#, c-format
-msgid "CONTINUED beginning column (%d) exceeds CONTINUED ending column (%d)."
-msgstr ""
-
-#: src/data-list.c:1415
-msgid "ID subcommand given multiple times."
+msgid "Unknown record type \"%.*s\"."
msgstr ""
-#: src/data-list.c:1424
+#: src/file-type.c:693
#, c-format
-msgid "ID beginning column (%ld) must be positive."
+msgid "Unknown record type %g."
msgstr ""
-#: src/data-list.c:1439
-#, c-format
-msgid "ID ending column (%ld) must be positive."
+#: src/flip.c:85
+msgid ""
+"FLIP ignores TEMPORARY. Temporary transformations will be made permanent."
msgstr ""
-#: src/data-list.c:1445
+#: src/flip.c:229
#, c-format
-msgid "ID ending column (%ld) cannot be less than ID beginning column (%d)."
-msgstr ""
-
-#: src/data-list.c:1484
-msgid "Missing required specification STARTS."
+msgid "Could not create acceptable variant for variable %s."
msgstr ""
-#: src/data-list.c:1486
-msgid "Missing required specification OCCURS."
+#: src/flip.c:245
+msgid "Cannot create more than 99999 variable names."
msgstr ""
-#: src/data-list.c:1493
-msgid "ID specified without CONTINUED."
+#: src/flip.c:289
+msgid "Could not create temporary file for FLIP."
msgstr ""
-#: src/data-list.c:1581
-msgid "String variable not allowed here."
+#: src/flip.c:296 src/flip.c:363
+#, c-format
+msgid "Error writing FLIP file: %s."
msgstr ""
-#: src/data-list.c:1591
+#: src/flip.c:405
#, c-format
-msgid "%s (%d) must be at least 1."
+msgid "Error rewinding FLIP file: %s."
msgstr ""
-#: src/data-list.c:1597
-#, c-format
-msgid "Variable or integer expected for %s."
+#: src/flip.c:409
+msgid "Error creating FLIP source file."
msgstr ""
-#: src/data-list.c:1736
+#: src/flip.c:418
#, c-format
-msgid "Mismatched case ID (%s). Expected value was %s."
+msgid "Error reading FLIP file: %s."
msgstr ""
-#: src/data-list.c:1768
+#: src/flip.c:439
#, c-format
-msgid ""
-"Variable %s starting in column %d extends beyond physical record length of %"
-"d."
+msgid "Error seeking FLIP source file: %s."
msgstr ""
-#: src/data-list.c:1836
+#: src/flip.c:444
#, c-format
-msgid "Invalid value %d for OCCURS."
+msgid "Error writing FLIP source file: %s."
msgstr ""
-#: src/data-list.c:1842
+#: src/flip.c:455
#, c-format
-msgid "Beginning column for STARTS (%d) must be at least 1."
+msgid "Error rewind FLIP source file: %s."
msgstr ""
-#: src/data-list.c:1850
+#: src/flip.c:507
#, c-format
-msgid "Ending column for STARTS (%d) is less than beginning column (%d)."
+msgid "Error reading FLIP temporary file: %s."
msgstr ""
-#: src/data-list.c:1858
-#, c-format
-msgid "Invalid value %d for LENGTH."
+#: src/flip.c:510
+msgid "Unexpected end of file reading FLIP temporary file."
msgstr ""
-#: src/data-list.c:1865
-#, c-format
-msgid "Beginning column for CONTINUED (%d) must be at least 1."
+#: src/format.c:71
+msgid "X and T format specifiers not allowed here."
msgstr ""
-#: src/data-list.c:1873
+#: src/format.c:79
#, c-format
-msgid "Ending column for CONTINUED (%d) is less than beginning column (%d)."
+msgid "%.*s is not a valid data format."
msgstr ""
-#: src/data-list.c:1896
+#: src/format.c:128
#, c-format
msgid ""
-"Number of repetitions specified on OCCURS (%d) exceed number of repetitions "
-"available in space on STARTS (%d), and CONTINUED not specified."
+"Format %s specifies an odd width %d, but format %s requires an even width."
msgstr ""
-#: src/data-list.c:1913
+#: src/format.c:136
#, c-format
-msgid "Unexpected end of file with %d repetitions remaining out of %d."
+msgid ""
+"Format %s specifies a bad number of implied decimal places %d. Input format "
+"%s allows up to 16 implied decimal places."
msgstr ""
-#: src/data-out.c:143 src/sfm-read.c:470 src/sysfile-info.c:116
-msgid "Unknown"
+#: src/format.c:160
+#, c-format
+msgid "Format %s may not be used as an input format."
msgstr ""
-#: src/data-out.c:251
+#: src/format.c:166
+#, c-format
msgid ""
-"The N output format cannot be used to output a negative number or the system-"
-"missing value."
+"Input format %s specifies a bad width %d. Format %s requires a width "
+"between %d and %d."
msgstr ""
-#: src/data-out.c:362
+#: src/format.c:190
#, c-format
msgid ""
-"Quality of zoned decimal (Z) output format code is suspect. Check your "
-"results. Report bugs to %s."
+"Output format %s specifies a bad width %d. Format %s requires a width "
+"between %d and %d."
msgstr ""
-#: src/data-out.c:369
-msgid "The system-missing value cannot be output as a zoned decimal number."
+#: src/format.c:201
+#, c-format
+msgid ""
+"Output format %s requires minimum width %d to allow %d decimal places. Try %"
+"s%d.%d instead of %s."
msgstr ""
-#: src/data-out.c:382
+#: src/format.c:222
#, c-format
-msgid "Number %g too big to fit in field with format Z%d.%d."
+msgid "%s variables are not compatible with %s format %s."
msgstr ""
-#: src/data-out.c:774
-#, c-format
-msgid "Time value %g too large in magnitude to convert to alphanumeric time."
+#: src/format.c:223 src/pfm-read.c:473 src/sfm-read.c:994
+msgid "String"
msgstr ""
-#: src/data-out.c:827
-#, c-format
-msgid "Weekday index %d does not lie between 1 and 7."
+#: src/format.c:223 src/pfm-read.c:473 src/sfm-read.c:994
+msgid "Numeric"
msgstr ""
-#: src/data-out.c:848
+#: src/format.c:243
#, c-format
-msgid "Month index %d does not lie between 1 and 12."
+msgid "String variable with width %d not compatible with format %s."
msgstr ""
-#: src/data-out.c:960
-#, c-format
-msgid ""
-"Year %d cannot be represented in four digits for output formatting purposes."
+#: src/format.c:363
+msgid "Format specifier expected."
msgstr ""
-#: src/dfm.c:74
+#: src/format.c:375
#, c-format
-msgid "%s: Closing data-file handle %s."
+msgid "Data format %s does not specify a width."
msgstr ""
-#: src/dfm.c:96
-msgid "<<Bug in dfm.c>>"
+#: src/format.c:393
+#, c-format
+msgid "Data format %s is not valid."
msgstr ""
-#: src/dfm.c:118
-#, c-format
-msgid "%s: Opening data-file handle %s for reading."
+#: src/formats.c:86
+msgid "`(' expected after variable list"
msgstr ""
-#: src/dfm.c:135 src/dfm.c:152
-msgid "BEGIN DATA expected."
+#: src/formats.c:96 src/numeric.c:65 src/numeric.c:136
+msgid "`)' expected after output format."
msgstr ""
-#: src/dfm.c:172
+#: src/get.c:246
#, c-format
-msgid "An error occurred while opening \"%s\" for reading as a data file: %s."
+msgid "The required %s subcommand was not present"
msgstr ""
-#: src/dfm.c:201
+#: src/get.c:252
#, c-format
-msgid "%s: Opening data-file handle %s for writing."
+msgid "Unsupported sysfile version: %d. Using version %d instead."
msgstr ""
-#: src/dfm.c:207
-msgid "Cannot open the inline file for writing."
+#: src/get.c:408 src/print.c:179
+msgid "expecting a valid subcommand"
msgstr ""
-#: src/dfm.c:222
+#: src/get.c:451
#, c-format
-msgid "An error occurred while opening \"%s\" for writing as a data file: %s."
-msgstr ""
-
-#: src/dfm.c:367
msgid ""
-"Unexpected end-of-file while reading data in BEGIN DATA. This probably "
-"indicates a missing or misformatted END DATA command. END DATA must appear "
-"by itself on a single line with exactly one space between words."
+"Cannot rename %s as %s because there already exists a variable named %s. To "
+"rename variables with overlapping names, use a single RENAME subcommand such "
+"as \"/RENAME (A=B)(B=C)(C=A)\", or equivalently, \"/RENAME (A B C=B C A)\"."
msgstr ""
-#: src/dfm.c:400 src/dfm.c:421
-#, c-format
-msgid "Error reading file %s: %s."
+#: src/get.c:476
+msgid "`=' expected after variable list."
msgstr ""
-#: src/dfm.c:424
+#: src/get.c:483
#, c-format
-msgid "%s: Partial record at end of file."
+msgid ""
+"Number of variables on left side of `=' (%d) does not match number of "
+"variables on right side (%d), in parenthesized group %d of RENAME subcommand."
msgstr ""
-#: src/dfm.c:482
+#: src/get.c:496
#, c-format
-msgid "Cannot read from file %s already opened for %s."
+msgid "Requested renaming duplicates variable name %s."
msgstr ""
-#: src/dfm.c:496
-#, c-format
-msgid "Attempt to read beyond end-of-file on file %s."
+#: src/get.c:526
+msgid "Cannot DROP all variables from dictionary."
msgstr ""
-#: src/dfm.c:590
-#, c-format
-msgid "Cannot write to file %s already opened for %s."
+#: src/get.c:787
+msgid "The active file may not be specified more than once."
msgstr ""
-#: src/dfm.c:614
-#, c-format
-msgid "Error writing file %s: %s."
+#: src/get.c:796
+msgid "Cannot specify the active file since no active file has been defined."
msgstr ""
-#: src/dfm.c:657
+#: src/get.c:804
msgid ""
-"This command is not valid here since the current input program does not "
-"access the inline file."
+"MATCH FILES may not be used after TEMPORARY when the active file is an input "
+"source. Temporary transformations will be made permanent."
msgstr ""
-#: src/dfm.c:664
-msgid "inline file: Opening for reading."
+#: src/get.c:842
+msgid "Multiple IN subcommands for a single FILE or TABLE."
msgstr ""
-#: src/dfm.c:678
-msgid "Skipping remaining inline data."
+#: src/get.c:862
+msgid "BY may appear at most once."
msgstr ""
-#: src/dfm.c:690
-msgid "reading as a data file"
+#: src/get.c:882
+#, c-format
+msgid "File %s lacks BY variable %s."
msgstr ""
-#: src/dfm.c:697
-msgid "writing as a data file"
+#: src/get.c:895
+msgid "FIRST may appear at most once."
msgstr ""
-#: src/do-if.c:118
-msgid "There is no DO IF to match with this ELSE IF."
+#: src/get.c:909
+msgid "LAST may appear at most once."
msgstr ""
-#: src/do-if.c:123
-msgid "The ELSE command must follow all ELSE IF commands in a DO IF structure."
+#: src/get.c:950
+msgid "BY is required when TABLE is specified."
msgstr ""
-#: src/do-if.c:146
-msgid "End of command expected."
+#: src/get.c:955
+msgid "BY is required when IN is specified."
msgstr ""
-#: src/do-if.c:164
-msgid "There is no DO IF to match with this ELSE."
+#: src/get.c:982
+#, c-format
+msgid "IN variable name %s duplicates an existing variable name."
msgstr ""
-#: src/do-if.c:170
+#: src/get.c:1412
+#, c-format
msgid ""
-"There may be at most one ELSE clause in each DO IF structure. It must be "
-"the last clause."
+"Variable %s in file %s (%s) has different type or width from the same "
+"variable in earlier file (%s)."
msgstr ""
-#: src/do-if.c:207
-msgid "There is no DO IF to match with this END IF."
+#: src/get.c:1503
+msgid "expecting COMM or TAPE"
msgstr ""
-#: src/do-if.c:293
+#: src/getline.c:175
#, c-format
-msgid "DO IF %d: true\n"
+msgid "Can't find `%s' in include file search path."
msgstr ""
-#: src/do-if.c:298
+#: src/getline.c:330
#, c-format
-msgid "DO IF %d: false\n"
+msgid "%s: Opening as syntax file."
msgstr ""
-#: src/do-if.c:303
+#: src/getline.c:335
#, c-format
-msgid "DO IF %d: missing\n"
-msgstr ""
-
-#: src/error.c:113
-msgid "Terminating NOW due to a fatal error!"
+msgid "Opening `%s': %s."
msgstr ""
-#: src/error.c:190
-msgid "Terminating execution of syntax file due to error."
+#: src/getline.c:344 src/html.c:348 src/postscript.c:1466
+#, c-format
+msgid "Reading `%s': %s."
msgstr ""
-#: src/error.c:192
+#: src/getline.c:402
#, c-format
-msgid "Errors (%d) exceeds limit (%d)."
+msgid "Closing `%s': %s."
msgstr ""
-#: src/error.c:195
+#: src/groff-font.c:101
#, c-format
-msgid "Warnings (%d) exceed limit (%d)."
+msgid "%s: Opening Groff font file..."
msgstr ""
-#: src/error.c:253
-msgid "fatal"
+#: src/groff-font.c:155
+msgid "Missing font name."
msgstr ""
-#: src/error.c:255 src/error.c:262 src/error.c:265 src/expr-prs.c:1463
-msgid "error"
+#: src/groff-font.c:165
+msgid "Missing encoding filename."
msgstr ""
-#: src/error.c:256 src/error.c:263 src/error.c:266
-msgid "warning"
+#: src/groff-font.c:178
+msgid "Bad spacewidth value."
msgstr ""
-#: src/error.c:257 src/error.c:267
-msgid "note"
+#: src/groff-font.c:190
+msgid "Bad slant value."
msgstr ""
-#: src/error.c:259 src/error.c:260
-msgid "installation error"
+#: src/groff-font.c:215
+#, c-format
+msgid "Unknown ligature `%s'."
msgstr ""
-#: src/expr-evl.c:1164
-msgid ""
-"A number being treated as a Boolean in an expression was found to have a "
-"value other than 0 (false), 1 (true), or the system-missing value. The "
-"result was forced to 0."
+#: src/groff-font.c:250
+msgid "Unexpected end of line reading character set."
msgstr ""
-#: src/expr-evl.c:1208
-#, c-format
-msgid ""
-"SYSMIS is not a valid index value for vector %s. The result will be set to "
-"SYSMIS."
+#: src/groff-font.c:258
+msgid "Can't use ditto mark for first character."
msgstr ""
-#: src/expr-evl.c:1212
-#, c-format
-msgid ""
-"%g is not a valid index value for vector %s. The result will be set to "
-"SYSMIS."
+#: src/groff-font.c:263
+msgid "Can't ditto into an unnamed character."
msgstr ""
-#: src/expr-evl.c:1230
+#: src/groff-font.c:280
#, c-format
-msgid ""
-"SYSMIS is not a valid index value for vector %s. The result will be set to "
-"the empty string."
+msgid "Missing metrics for character `%s'."
msgstr ""
-#: src/expr-evl.c:1235
+#: src/groff-font.c:289
#, c-format
-msgid ""
-"%g is not a valid index value for vector %s. The result will be set to the "
-"empty string."
+msgid "Missing type for character `%s'."
msgstr ""
-#: src/expr-evl.c:1340
+#: src/groff-font.c:298
#, c-format
-msgid "evaluate_expression(): not implemented: %s\n"
+msgid "Missing code for character `%s'."
msgstr ""
-#: src/expr-evl.c:1343
-#, c-format
-msgid "evaluate_expression(): not implemented: %d\n"
+#: src/groff-font.c:317
+msgid "Malformed kernpair."
msgstr ""
-#: src/expr-opt.c:662
-msgid ""
-"While optimizing a constant expression, there was a bad value for the third "
-"argument to INDEX."
+#: src/groff-font.c:324
+msgid "Unexpected end of line reading kernpairs."
msgstr ""
-#: src/expr-opt.c:687
-msgid ""
-"While optimizing a constant expression, there was a bad value for the third "
-"argument to RINDEX."
+#: src/groff-font.c:330
+msgid "Bad kern value."
msgstr ""
-#: src/expr-opt.c:746
+#: src/groff-font.c:362
#, c-format
-msgid "Third argument to %cPAD() must be at least one character in length."
+msgid "Font read successfully with internal name %s."
msgstr ""
-#: src/expr-opt.c:779
-#, c-format
-msgid "Second argument to %cTRIM() must be at least one character in length."
+#: src/groff-font.c:383
+msgid "Error reading font."
msgstr ""
-#: src/expr-opt.c:880
-msgid ""
-"When optimizing a constant expression, an integer that was being used as an "
-"Boolean value was found to have a constant value other than 0, 1, or SYSMIS."
+#: src/groff-font.c:394
+msgid "installation error: Groff font error: "
msgstr ""
-#: src/expr-prs.c:140
-msgid ""
-"A string expression was supplied in a place where a Boolean expression was "
-"expected."
+#: src/groff-font.c:419
+#, c-format
+msgid "Bad character \\%3o."
msgstr ""
-#: src/expr-prs.c:151
-msgid ""
-"A numeric expression was expected in a place where one was not supplied."
+#: src/groff-font.c:673
+#, c-format
+msgid "Groff font error: Cannot find \"%s\"."
msgstr ""
-#: src/expr-prs.c:159
-msgid "A string expression was expected in a place where one was not supplied."
+#: src/groff-font.c:738
+#, c-format
+msgid "%s: Opening Groff description file..."
msgstr ""
-#: src/expr-prs.c:173
-msgid "The OR operator cannot take string operands."
+#: src/groff-font.c:754
+msgid "Multiple `sizes' declarations."
msgstr ""
-#: src/expr-prs.c:221
-msgid "The AND operator cannot take string operands."
+#: src/groff-font.c:771
+msgid "Unexpected end of file. Missing 0 terminator to `sizes' command?"
msgstr ""
-#: src/expr-prs.c:270
-msgid "The NOT operator cannot take a string operand."
+#: src/groff-font.c:783 src/groff-font.c:790 src/groff-font.c:803
+msgid "Bad argument to `sizes'."
msgstr ""
-#: src/expr-prs.c:297
-msgid ""
-"Strings cannot be compared with numeric or Boolean values with the "
-"relational operators = >= > <= < <>."
+#: src/groff-font.c:795
+msgid "Bad range in argument to `sizes'."
msgstr ""
-#: src/expr-prs.c:354
-msgid "The `+' and `-' operators may only be used with numeric operands."
+#: src/groff-font.c:824
+msgid "Family name expected."
msgstr ""
-#: src/expr-prs.c:406
-msgid "The `*' and `/' operators may only be used with numeric operands."
+#: src/groff-font.c:829
+msgid "This command already specified."
msgstr ""
-#: src/expr-prs.c:457
-msgid "The unary minus (-) operator can only take a numeric operand."
+#: src/groff-font.c:849
+#, c-format
+msgid "%s: Device characteristic already defined."
msgstr ""
-#: src/expr-prs.c:487
-msgid "Both operands to the ** operator must be numeric."
+#: src/groff-font.c:855
+#, c-format
+msgid "%s: Invalid numeric format."
msgstr ""
-#: src/expr-prs.c:581
-msgid "Use of $LENGTH is obsolete, returning default of 66."
+#: src/groff-font.c:885
+msgid "Missing `res', `unitwidth', and/or `sizes' line(s)."
msgstr ""
-#: src/expr-prs.c:586
-msgid "Use of $WIDTH is obsolete, returning default of 131."
+#: src/groff-font.c:911
+msgid "Description file read successfully."
msgstr ""
-#: src/expr-prs.c:591
-#, c-format
-msgid "Unknown system variable %s."
+#: src/groff-font.c:943
+msgid "Error reading description file."
msgstr ""
-#: src/expr-prs.c:630
-msgid "expecting variable name"
+#: src/groff-font.c:1000
+msgid "<<fallback>>"
msgstr ""
-#: src/expr-prs.c:672
-msgid "in expression"
+#: src/hash.c:520
+msgid "hash table:"
msgstr ""
-#: src/expr-prs.c:853
-msgid "Argument 2 to LAG must be a small positive integer constant."
+#: src/html.c:67
+#, c-format
+msgid "HTML driver initializing as `%s'..."
msgstr ""
-#: src/expr-prs.c:926 src/expr-prs.c:965
+#: src/html.c:171
#, c-format
+msgid "Unknown configuration parameter `%s' for HTML device driver."
+msgstr ""
+
+#: src/html.c:254
msgid ""
-"Type mismatch in argument %d of %s, which was expected to be of %s type. It "
-"was actually of %s type. "
+"Cannot find HTML prologue. The use of `-vv' on the command line is "
+"suggested as a debugging aid."
msgstr ""
-#: src/expr-prs.c:952
+#: src/html.c:259
#, c-format
-msgid "%s cannot take Boolean operands."
+msgid "%s: %s: Opening HTML prologue..."
msgstr ""
-#: src/expr-prs.c:984
-msgid "in function call"
+#: src/html.c:286 src/html.c:297 src/postscript.c:1358 src/postscript.c:1369
+msgid "nobody"
msgstr ""
-#: src/expr-prs.c:998
-msgid "RANGE requires an odd number of arguments, but at least three."
+#: src/html.c:293 src/html.c:298 src/postscript.c:1365 src/postscript.c:1370
+msgid "nowhere"
msgstr ""
-#: src/expr-prs.c:1008
+#: src/html.c:357
#, c-format
-msgid "%s requires at least two arguments."
+msgid "%s: HTML prologue read successfully."
msgstr ""
-#: src/expr-prs.c:1023
+#: src/html.c:361
#, c-format
-msgid "%s.%d requires at least %d arguments."
+msgid "%s: Error reading HTML prologue."
msgstr ""
-#: src/expr-prs.c:1065
+#: src/html.c:389
#, c-format
-msgid ""
-"Argument %d to CONCAT is type %s. All arguments to CONCAT must be strings."
+msgid "HTML output driver: %s: %s"
msgstr ""
-#: src/expr-prs.c:1124
+#: src/html.c:420 src/list.q:252
#, c-format
+msgid "Cannot open first page on HTML device %s."
+msgstr ""
+
+#: src/include.c:40
+msgid "expecting filename"
+msgstr ""
+
+#: src/inpt-pgm.c:81
+msgid "No matching INPUT PROGRAM command."
+msgstr ""
+
+#: src/inpt-pgm.c:86
msgid ""
-"Argument %d to %s was expected to be of %s type. It was actually of type %s."
+"No data-input or transformation commands specified between INPUT PROGRAM and "
+"END INPUT PROGRAM."
msgstr ""
-#: src/expr-prs.c:1143
-#, c-format
-msgid "%s is not a numeric format."
+#: src/inpt-pgm.c:284 src/inpt-pgm.c:412
+msgid ""
+"This command may only be executed between INPUT PROGRAM and END INPUT "
+"PROGRAM."
msgstr ""
-#: src/expr-prs.c:1169
-#, c-format
-msgid "Too few arguments to function %s."
+#: src/inpt-pgm.c:334
+msgid "COLUMN subcommand multiply specified."
msgstr ""
-#: src/expr-prs.c:1201
-#, c-format
+#: src/inpt-pgm.c:385
msgid ""
-"Type mismatch in argument %d of %s, which was expected to be numeric. It "
-"was actually type %s."
+"REREAD: Column numbers must be positive finite numbers. Column set to 1."
msgstr ""
-#: src/expr-prs.c:1210
+#: src/lexer.c:252
#, c-format
-msgid "Missing comma following argument %d of %s."
-msgstr ""
-
-#: src/expr-prs.c:1248
-msgid "The index value after a vector name must be numeric."
+msgid "%s does not form a valid number."
msgstr ""
-#: src/expr-prs.c:1255
-msgid "`)' expected after a vector index value."
+#: src/lexer.c:369
+#, c-format
+msgid "Bad character in input: `%c'."
msgstr ""
-#: src/expr-prs.c:1288
+#: src/lexer.c:371
#, c-format
-msgid "There is no function named %s."
+msgid "Bad character in input: `\\%o'."
msgstr ""
-#: src/expr-prs.c:1293
+#: src/lexer.c:409
#, c-format
-msgid "Function %s may not be given a minimum number of arguments."
+msgid "Syntax error %s at %s."
msgstr ""
-#: src/expr-prs.c:1302
+#: src/lexer.c:412
#, c-format
-msgid "expecting `)' after %s function"
+msgid "Syntax error at %s."
msgstr ""
-#: src/expr-prs.c:1466
-msgid "Boolean"
+#: src/lexer.c:530 src/lexer.c:547
+#, c-format
+msgid "expecting `%s'"
msgstr ""
-#: src/expr-prs.c:1695
-msgid "!!TERMINAL!!"
+#: src/lexer.c:561 src/val-labs.c:154
+msgid "expecting string"
msgstr ""
-#: src/expr-prs.c:1721
-msgid "!!SENTINEL!!"
+#: src/lexer.c:575 src/val-labs.c:163
+msgid "expecting integer"
msgstr ""
-#: src/expr-prs.c:1724
-#, c-format
-msgid "!!ERROR%d!!"
+#: src/lexer.c:589
+msgid "expecting number"
msgstr ""
-#: src/expr-prs.c:1742
-msgid "postfix:"
+#: src/lexer.c:603
+msgid "expecting identifier"
msgstr ""
-#: src/file-type.c:126
-msgid "MIXED, GROUPED, or NESTED expected."
+#: src/lexer.c:889
+msgid "<ERROR>"
msgstr ""
-#: src/file-type.c:149
-msgid "The CASE subcommand is not valid on FILE TYPE MIXED."
+#: src/lexer.c:1023 src/repeat.c:214
+msgid "Unexpected end of file."
msgstr ""
-#: src/file-type.c:167
-msgid "WARN or NOWARN expected after WILD."
+#: src/lexer.c:1032
+msgid "binary"
msgstr ""
-#: src/file-type.c:175
-msgid "The DUPLICATE subcommand is not valid on FILE TYPE MIXED."
+#: src/lexer.c:1032
+msgid "octal"
msgstr ""
-#: src/file-type.c:189
-msgid "DUPLICATE=CASE is only valid on FILE TYPE NESTED."
+#: src/lexer.c:1032
+msgid "hex"
msgstr ""
-#: src/file-type.c:198
+#: src/lexer.c:1046
#, c-format
-msgid "WARN%s expected after DUPLICATE."
-msgstr ""
-
-#: src/file-type.c:199
-msgid ", NOWARN, or CASE"
-msgstr ""
-
-#: src/file-type.c:200
-msgid " or NOWARN"
+msgid "String of %s digits has %d characters, which is not a multiple of %d."
msgstr ""
-#: src/file-type.c:208
-msgid "The MISSING subcommand is not valid on FILE TYPE MIXED."
+#: src/lexer.c:1075
+#, c-format
+msgid "`%c' is not a valid %s digit."
msgstr ""
-#: src/file-type.c:220
-msgid "WARN or NOWARN after MISSING."
+#: src/lexer.c:1106
+msgid "Unterminated string constant."
msgstr ""
-#: src/file-type.c:228
-msgid "ORDERED is only valid on FILE TYPE GROUPED."
+#: src/lexer.c:1178
+#, c-format
+msgid "String exceeds 255 characters in length (%d characters)."
msgstr ""
-#: src/file-type.c:239
-msgid "YES or NO expected after ORDERED."
+#: src/lexer.c:1193
+msgid ""
+"Sorry, literal strings may not contain null characters. Replacing with "
+"spaces."
msgstr ""
-#: src/file-type.c:245 src/file-type.c:548 src/get.c:343
-msgid "while expecting a valid subcommand"
+#: src/loop.c:194
+msgid "The index variable may not be a string variable."
msgstr ""
-#: src/file-type.c:252
-msgid "The required RECORD subcommand was not present."
+#: src/loop.c:300
+msgid "There is no LOOP command that corresponds to this END LOOP."
msgstr ""
-#: src/file-type.c:260
-msgid "The required CASE subcommand was not present."
+#: src/loop.c:494
+msgid ""
+"This command may only appear enclosed in a LOOP/END LOOP control structure."
msgstr ""
-#: src/file-type.c:266
-msgid "CASE and RECORD must specify different variable names."
+#: src/loop.c:500
+msgid "BREAK not enclosed in DO IF structure."
msgstr ""
-#: src/file-type.c:315
-msgid "Column value must be positive."
+#: src/loop.c:578
+#, c-format
+msgid "%s without %s."
msgstr ""
-#: src/file-type.c:330
-msgid "Ending column precedes beginning column."
+#: src/main.c:86
+msgid "Error initializing output drivers."
msgstr ""
-#: src/file-type.c:349
-msgid "Bad format specifier name."
+#: src/main.c:156
+msgid "This command not executed."
msgstr ""
-#: src/file-type.c:410 src/file-type.c:569
+#: src/main.c:160
msgid ""
-"This command may only appear within a FILE TYPE/END FILE TYPE structure."
-msgstr ""
-
-#: src/file-type.c:417
-msgid "OTHER may appear only on the last RECORD TYPE command."
+"Skipping the rest of this command. Part of this command may have been "
+"executed."
msgstr ""
-#: src/file-type.c:427
-msgid "No input commands (DATA LIST, REPEATING DATA) for above RECORD TYPE."
+#: src/main.c:165
+msgid ""
+"Skipping the rest of this command. This command was fully executed up to "
+"this point."
msgstr ""
-#: src/file-type.c:481
+#: src/main.c:170
msgid ""
-"The CASE subcommand is not allowed on the RECORD TYPE command for FILE TYPE "
-"MIXED."
+"Trailing garbage was encountered following this command. The command was "
+"fully executed to this point."
msgstr ""
-#: src/file-type.c:491
-msgid ""
-"No variable name may be specified for the CASE subcommand on RECORD TYPE."
+#: src/main.c:187
+msgid "The rest of this command has been discarded."
msgstr ""
-#: src/file-type.c:499
-msgid ""
-"The CASE column specification on RECORD TYPE must give a format specifier "
-"that is the same type as that of the CASE column specification given on FILE "
-"TYPE."
+#: src/matrix-data.c:208
+msgid "VARIABLES subcommand multiply specified."
msgstr ""
-#: src/file-type.c:515
-msgid "WARN or NOWARN expected on DUPLICATE subcommand."
+#: src/matrix-data.c:223
+msgid "VARNAME_ cannot be explicitly specified on VARIABLES."
msgstr ""
-#: src/file-type.c:529
-msgid "WARN or NOWARN expected on MISSING subcommand."
+#: src/matrix-data.c:284
+msgid "in FORMAT subcommand"
msgstr ""
-#: src/file-type.c:542
-msgid "YES or NO expected on SPREAD subcommand."
+#: src/matrix-data.c:295
+msgid "SPLIT subcommand multiply specified."
msgstr ""
-#: src/file-type.c:582
-msgid "No input commands (DATA LIST, REPEATING DATA) on above RECORD TYPE."
+#: src/matrix-data.c:302
+msgid "in SPLIT subcommand"
msgstr ""
-#: src/file-type.c:589
-msgid "No commands between FILE TYPE and END FILE TYPE."
+#: src/matrix-data.c:312
+msgid "Split variable may not be named ROWTYPE_ or VARNAME_."
msgstr ""
-#: src/file-type.c:654
+#: src/matrix-data.c:346
#, c-format
-msgid "Unknown record type \"%.*s\"."
+msgid "Split variable %s is already another type."
msgstr ""
-#: src/file-type.c:678
-#, c-format
-msgid "Unknown record type %g."
+#: src/matrix-data.c:361
+msgid "FACTORS subcommand multiply specified."
msgstr ""
-#: src/filename.c:221
+#: src/matrix-data.c:379
#, c-format
-msgid "Searching for `%s'..."
+msgid "Factor variable %s is already another type."
msgstr ""
-#: src/filename.c:229 src/filename.c:261
-msgid "Search unsuccessful!"
+#: src/matrix-data.c:394
+msgid "CELLS subcommand multiply specified."
msgstr ""
-#: src/filename.c:254
-#, c-format
-msgid "Found `%s'."
+#: src/matrix-data.c:400 src/matrix-data.c:419
+msgid "expecting positive integer"
msgstr ""
-#: src/filename.c:669
-#, c-format
-msgid "Not opening pipe file `%s' because SAFER option set."
+#: src/matrix-data.c:413
+msgid "N subcommand multiply specified."
msgstr ""
-#: src/flip.c:160
-#, c-format
-msgid "Could not create acceptable variant for variable %s."
+#: src/matrix-data.c:434
+msgid "CONTENTS subcommand multiply specified."
msgstr ""
-#: src/flip.c:177
-msgid "Cannot create more than 99999 variable names."
+#: src/matrix-data.c:454
+msgid "Nested parentheses not allowed."
msgstr ""
-#: src/flip.c:293
-#, c-format
-msgid "Error reading FLIP source file: %s."
+#: src/matrix-data.c:464
+msgid "Mismatched right parenthesis (`(')."
msgstr ""
-#: src/flip.c:369
-msgid "Could not create temporary file for FLIP."
+#: src/matrix-data.c:469
+msgid "Empty parentheses not allowed."
msgstr ""
-#: src/flip.c:379 src/flip.c:398
-#, c-format
-msgid "Error writing FLIP file: %s."
+#: src/matrix-data.c:482 src/matrix-data.c:490
+msgid "in CONTENTS subcommand"
msgstr ""
-#: src/flip.c:434
-msgid "Error creating FLIP source file."
+#: src/matrix-data.c:497
+#, c-format
+msgid "Content multiply specified for %s."
msgstr ""
-#: src/flip.c:437
-#, c-format
-msgid "Error rewinding FLIP file: %s."
+#: src/matrix-data.c:514
+msgid "Missing right parenthesis."
msgstr ""
-#: src/flip.c:446
-#, c-format
-msgid "Error reading FLIP file: %s."
+#: src/matrix-data.c:534
+msgid "Missing VARIABLES subcommand."
msgstr ""
-#: src/flip.c:458
-#, c-format
-msgid "Error seeking FLIP source file: %s."
+#: src/matrix-data.c:540
+msgid ""
+"CONTENTS subcommand not specified: assuming file contains only CORR matrix."
msgstr ""
-#: src/flip.c:463
-#, c-format
-msgid "Error writing FLIP source file: %s."
+#: src/matrix-data.c:550
+msgid ""
+"Missing CELLS subcommand. CELLS is required when ROWTYPE_ is not given in "
+"the data and factors are present."
msgstr ""
-#: src/flip.c:471
-#, c-format
-msgid "Error rewind FLIP source file: %s."
+#: src/matrix-data.c:558
+msgid "Split file values must be present in the data when ROWTYPE_ is present."
msgstr ""
-#: src/format.c:74
-msgid "X and T format specifiers not allowed here."
+#: src/matrix-data.c:611
+msgid "No continuous variables specified."
msgstr ""
-#: src/format.c:80
-#, c-format
-msgid "%s is not a valid data format."
+#: src/matrix-data.c:854
+msgid "Scope of string exceeds line."
msgstr ""
-#: src/format.c:111
+#: src/matrix-data.c:921
#, c-format
-msgid "Format %s may not be used as an input format."
+msgid "End of line expected %s while reading %s."
msgstr ""
-#: src/format.c:116
+#: src/matrix-data.c:1106
#, c-format
-msgid ""
-"Input format %s specifies a bad width %d. Format %s requires a width "
-"between %d and %d."
+msgid "expecting value for %s %s"
msgstr ""
-#: src/format.c:123
+#: src/matrix-data.c:1270
#, c-format
-msgid ""
-"Input format %s specifies an odd width %d, but format %s requires an even "
-"width between %d and %d."
+msgid "Syntax error expecting SPLIT FILE value %s."
msgstr ""
-#: src/format.c:130
+#: src/matrix-data.c:1279
#, c-format
-msgid ""
-"Input format %s specifies a bad number of implied decimal places %d. Input "
-"format %s allows up to 16 implied decimal places."
+msgid "Expecting value %g for %s."
msgstr ""
-#: src/format.c:150
+#: src/matrix-data.c:1320 src/matrix-data.c:1784
#, c-format
-msgid ""
-"Output format %s specifies a bad width %d. Format %s requires a width "
-"between %d and %d."
+msgid "Syntax error expecting factor value %s."
msgstr ""
-#: src/format.c:160
+#: src/matrix-data.c:1329
#, c-format
-msgid ""
-"Output format %s requires minimum width %d to allow %d decimal places. Try %"
-"s%d.%d instead of %s."
+msgid "Syntax error expecting value %g for %s %s."
msgstr ""
-#: src/format.c:168
+#: src/matrix-data.c:1564
#, c-format
-msgid ""
-"Output format %s specifies an odd width %d, but output format %s requires an "
-"even width between %d and %d."
+msgid "Syntax error %s expecting SPLIT FILE value."
msgstr ""
-#: src/format.c:175
+#: src/matrix-data.c:1691
#, c-format
msgid ""
-"Output format %s specifies a bad number of implied decimal places %d. "
-"Output format %s allows a number of implied decimal places between 1 and 16."
+"Expected %d lines of data for %s content; actually saw %d lines. No data "
+"will be output for this content."
msgstr ""
-#: src/format.c:192
+#: src/matrix-data.c:1726
#, c-format
-msgid "Can't display a string variable of width %d with format specifier %s."
-msgstr ""
-
-#: src/format.c:302
-msgid "Format specifier expected."
+msgid "Multiply specified ROWTYPE_ %s."
msgstr ""
-#: src/format.c:313
+#: src/matrix-data.c:1731
#, c-format
-msgid "Data format %s does not specify a width."
+msgid "Syntax error %s expecting ROWTYPE_ string."
msgstr ""
-#: src/format.c:330
+#: src/matrix-data.c:1751
#, c-format
-msgid "Data format %s is not valid."
-msgstr ""
-
-#: src/formats.c:93
-msgid "`(' expected after variable list"
+msgid "Syntax error %s."
msgstr ""
-#: src/formats.c:102
+#: src/matrix-data.c:1901
#, c-format
-msgid "Format %s may not be assigned to a %s variable."
-msgstr ""
-
-#: src/formats.c:123 src/numeric.c:66 src/numeric.c:139
-msgid "`)' expected after output format."
-msgstr ""
-
-#: src/formats.c:153
-msgid "Formats:\n"
-msgstr ""
-
-#: src/formats.c:154
-msgid " Name Print Write\n"
+msgid "Duplicate specification for %s."
msgstr ""
-#: src/get.c:110
-msgid "GET translation table from file to memory:\n"
+#: src/matrix-data.c:1913
+#, c-format
+msgid "Too many rows of matrix data for %s."
msgstr ""
-#: src/get.c:115 src/get.c:1398
+#: src/matrix-data.c:1961
#, c-format
-msgid " %8s from %3d,%3d to %3d,%3d\n"
+msgid "Syntax error expecting value for %s %s."
msgstr ""
-#: src/get.c:349
-msgid "All variables deleted from system file dictionary."
+#: src/mis-val.c:71
+msgid "`)' expected after value specification."
msgstr ""
-#: src/get.c:396
+#: src/mis-val.c:101
#, c-format
-msgid ""
-"Cannot rename %s as %s because there already exists a variable named %s. To "
-"rename variables with overlapping names, use a single RENAME subcommand such "
-"as \"/RENAME (A=B)(B=C)(C=A)\", or equivalently, \"/RENAME (A B C=B C A)\"."
+msgid "`(' expected after variable name%s."
msgstr ""
-#: src/get.c:421
-msgid "`=' expected after variable list."
+#: src/mis-val.c:113
+msgid "Long string value specified."
msgstr ""
-#: src/get.c:428
-#, c-format
-msgid ""
-"Number of variables on left side of `=' (%d) does not match number of "
-"variables on right side (%d), in parenthesized group %d of RENAME subcommand."
+#: src/mis-val.c:118
+msgid "Short strings must be of equal width."
msgstr ""
-#: src/get.c:441
+#: src/mis-val.c:175
#, c-format
-msgid "Requested renaming duplicates variable name %s."
-msgstr ""
-
-#: src/get.c:461
-msgid ""
-"\n"
-"Variables in dictionary:\n"
+msgid "Range %g THRU %g is not valid because %g is greater than %g."
msgstr ""
-#: src/get.c:582
-msgid "The BY subcommand may be given once at most."
+#: src/mis-val.c:206
+msgid "Number or range expected."
msgstr ""
-#: src/get.c:649
-msgid "The active file may not be specified more than once."
+#: src/mis-val.c:239
+msgid "At most one range can exist in the missing values for any one variable."
msgstr ""
-#: src/get.c:658
-msgid "Cannot specify the active file since no active file has been defined."
+#: src/mis-val.c:245
+msgid "At most one individual value can be missing along with one range."
msgstr ""
-#: src/get.c:690
-msgid ""
-"IN, FIRST, and LAST subcommands may not occur before the first FILE or TABLE."
+#: src/mis-val.c:307
+msgid "String is not of proper length."
msgstr ""
-#: src/get.c:722
-#, c-format
-msgid "Multiple %s subcommands for a single FILE or TABLE."
+#: src/mis-val.c:316 src/repeat.c:460
+msgid "String expected."
msgstr ""
-#: src/get.c:732
+#: src/mkfile.c:52
#, c-format
-msgid "Duplicate variable name %s while creating %s variable."
+msgid "%s: Creating temporary file: %s."
msgstr ""
-#: src/get.c:746
-msgid ""
-"RENAME, KEEP, and DROP subcommands may not occur before the first FILE or "
-"TABLE."
-msgstr ""
-
-#: src/get.c:770
-msgid "The BY subcommand is required when a TABLE subcommand is given."
-msgstr ""
-
-#: src/get.c:791
+#: src/mkfile.c:94
#, c-format
-msgid "File %s lacks BY variable %s."
+msgid "%s: Creating file: %s."
msgstr ""
-#: src/get.c:1311
-#, c-format
+#: src/modify-vars.c:89
msgid ""
-"Variable %s in file %s (%s) has different type or width from the same "
-"variable in earlier file (%s)."
-msgstr ""
-
-#: src/get.c:1360
-msgid "expecting COMM or TAPE"
+"MODIFY VARS may not be used after TEMPORARY. Temporary transformations will "
+"be made permanent."
msgstr ""
-#: src/get.c:1393
-msgid "IMPORT translation table from file to memory:\n"
+#: src/modify-vars.c:113
+msgid "REORDER subcommand may be given at most once."
msgstr ""
-#: src/getline.c:161
-#, c-format
-msgid "Can't find `%s' in include file search path."
+#: src/modify-vars.c:136
+msgid "Cannot specify ALL after specifying a set of variables."
msgstr ""
-#: src/getline.c:316
-#, c-format
-msgid "%s: Opening as syntax file."
+#: src/modify-vars.c:146
+msgid "`(' expected on REORDER subcommand."
msgstr ""
-#: src/getline.c:321
-#, c-format
-msgid "Opening `%s': %s."
+#: src/modify-vars.c:158
+msgid "`)' expected following variable names on REORDER subcommand."
msgstr ""
-#: src/getline.c:330 src/html.c:330 src/postscript.c:1463
-#, c-format
-msgid "Reading `%s': %s."
+#: src/modify-vars.c:176
+msgid "RENAME subcommand may be given at most once."
msgstr ""
-#: src/getline.c:388
-#, c-format
-msgid "Closing `%s': %s."
+#: src/modify-vars.c:189
+msgid "`(' expected on RENAME subcommand."
msgstr ""
-#: src/glob.c:222
-msgid "data> "
+#: src/modify-vars.c:197
+msgid ""
+"`=' expected between lists of new and old variable names on RENAME "
+"subcommand."
msgstr ""
-#: src/glob.c:279
-msgid "Specify a terminal type with `setenv TERM <yourtype>'."
+#: src/modify-vars.c:205 src/rename-vars.c:75
+#, c-format
+msgid ""
+"Differing number of variables in old name list (%d) and in new name list (%"
+"d)."
msgstr ""
-#: src/glob.c:285
-msgid "Could not access the termcap data base."
+#: src/modify-vars.c:216
+msgid "`)' expected after variable lists on RENAME subcommand."
msgstr ""
-#: src/glob.c:287
-#, c-format
-msgid "Terminal type `%s' is not defined."
+#: src/modify-vars.c:230
+msgid ""
+"KEEP subcommand may be given at most once. It may notbe given in "
+"conjunction with the DROP subcommand."
msgstr ""
-#: src/glob.c:288
-msgid "Assuming screen of size 79x25."
+#: src/modify-vars.c:272
+msgid ""
+"DROP subcommand may be given at most once. It may not be given in "
+"conjunction with the KEEP subcommand."
msgstr ""
-#: src/groff-font.c:107
+#: src/modify-vars.c:298
#, c-format
-msgid "%s: Opening Groff font file..."
+msgid "Unrecognized subcommand name `%s'."
msgstr ""
-#: src/groff-font.c:161
-msgid "Missing font name."
+#: src/modify-vars.c:300
+msgid "Subcommand name expected."
msgstr ""
-#: src/groff-font.c:171
-msgid "Missing encoding filename."
+#: src/modify-vars.c:308
+msgid "`/' or `.' expected."
msgstr ""
-#: src/groff-font.c:184
-msgid "Bad spacewidth value."
+#: src/moments.c:513
+msgid "expecting weight value"
msgstr ""
-#: src/groff-font.c:196
-msgid "Bad slant value."
+#: src/numeric.c:58
+#, c-format
+msgid "Format type %s may not be used with a numeric variable."
msgstr ""
-#: src/groff-font.c:221
+#: src/numeric.c:77 src/numeric.c:159 src/vector.c:156
#, c-format
-msgid "Unknown ligature `%s'."
+msgid "There is already a variable named %s."
msgstr ""
-#: src/groff-font.c:256
-msgid "Unexpected end of line reading character set."
+#: src/numeric.c:129
+#, c-format
+msgid "Format type %s may not be used with a string variable."
msgstr ""
-#: src/groff-font.c:264
-msgid "Can't use ditto mark for first character."
+#: src/output.c:86
+msgid "Attempt to iterate driver list reentrantly."
msgstr ""
-#: src/groff-font.c:269
-msgid "Can't ditto into an unnamed character."
+#: src/output.c:163
+#, c-format
+msgid "Unknown output driver `%s'."
msgstr ""
-#: src/groff-font.c:286
+#: src/output.c:165
#, c-format
-msgid "Missing metrics for character `%s'."
+msgid "Output driver `%s' referenced but never defined."
msgstr ""
-#: src/groff-font.c:295
-#, c-format
-msgid "Missing type for character `%s'."
+#: src/output.c:295
+msgid "Cannot find output initialization file. Use `-vv' to view search path."
msgstr ""
-#: src/groff-font.c:304
+#: src/output.c:300
#, c-format
-msgid "Missing code for character `%s'."
+msgid "%s: Opening device description file..."
msgstr ""
-#: src/groff-font.c:323
-msgid "Malformed kernpair."
+#: src/output.c:304 src/output.c:1175 src/postscript.c:1102
+#, c-format
+msgid "Opening %s: %s."
msgstr ""
-#: src/groff-font.c:330
-msgid "Unexpected end of line reading kernpairs."
+#: src/output.c:315 src/output.c:1186 src/postscript.c:1117
+#, c-format
+msgid "Reading %s: %s."
msgstr ""
-#: src/groff-font.c:336
-msgid "Bad kern value."
+#: src/output.c:337 src/output.c:499
+msgid "Syntax error."
msgstr ""
-#: src/groff-font.c:368
+#: src/output.c:347 src/postscript.c:1128
#, c-format
-msgid "Font read successfully with internal name %s."
+msgid "Closing %s: %s."
msgstr ""
-#: src/groff-font.c:389
-msgid "Error reading font."
+#: src/output.c:352
+msgid "No output drivers are active."
msgstr ""
-#: src/groff-font.c:400
-msgid "installation error: Groff font error: "
+#: src/output.c:355
+msgid "Device definition file read successfully."
msgstr ""
-#: src/groff-font.c:425
-#, c-format
-msgid "Bad character \\%3o."
+#: src/output.c:357
+msgid "Error reading device definition file."
msgstr ""
-#: src/groff-font.c:665
-#, c-format
-msgid "Groff font error: Cannot find \"%s\"."
+#: src/output.c:471
+msgid ""
+"Driver classes:\n"
+"\t"
msgstr ""
-#: src/groff-font.c:730
-#, c-format
-msgid "%s: Opening Groff description file..."
+#: src/output.c:600
+msgid "Syntax error in string constant."
msgstr ""
-#: src/groff-font.c:746
-msgid "Multiple `sizes' declarations."
+#: src/output.c:632
+msgid "Syntax error in options."
msgstr ""
-#: src/groff-font.c:763
-msgid "Unexpected end of file. Missing 0 terminator to `sizes' command?"
+#: src/output.c:642
+msgid "Syntax error in options (`=' expected)."
msgstr ""
-#: src/groff-font.c:775 src/groff-font.c:782 src/groff-font.c:795
-msgid "Bad argument to `sizes'."
+#: src/output.c:649
+msgid "Syntax error in options (value expected after `=')."
msgstr ""
-#: src/groff-font.c:787
-msgid "Bad range in argument to `sizes'."
+#: src/output.c:721
+msgid "Driver name expected."
msgstr ""
-#: src/groff-font.c:816
-msgid "Family name expected."
+#: src/output.c:742
+msgid "Class name expected."
msgstr ""
-#: src/groff-font.c:821
-msgid "This command already specified."
+#: src/output.c:751
+#, c-format
+msgid "Unknown output driver class `%s'."
msgstr ""
-#: src/groff-font.c:841
+#: src/output.c:758
#, c-format
-msgid "%s: Device characteristic already defined."
+msgid "Can't initialize output driver class `%s'."
msgstr ""
-#: src/groff-font.c:847
+#: src/output.c:765
#, c-format
-msgid "%s: Invalid numeric format."
+msgid "Can't initialize output driver `%s' of class `%s'."
msgstr ""
-#: src/groff-font.c:877
-msgid "Missing `res', `unitwidth', and/or `sizes' line(s)."
+#: src/output.c:787
+#, c-format
+msgid "Unknown device type `%s'."
msgstr ""
-#: src/groff-font.c:903
-msgid "Description file read successfully."
+#: src/output.c:799
+#, c-format
+msgid "Can't complete initialization of output driver `%s' of class `%s'."
msgstr ""
-#: src/groff-font.c:935
-msgid "Error reading description file."
+#: src/output.c:846
+#, c-format
+msgid "Can't deinitialize output driver class `%s'."
msgstr ""
-#: src/groff-font.c:992
-msgid "<<fallback>>"
+#: src/output.c:919
+#, c-format
+msgid "Trying to find keyword `%s'...\n"
msgstr ""
-#: src/hash.c:492
-msgid "hash table:"
+#: src/output.c:1036
+#, c-format
+msgid "Unit \"%s\" is unknown in dimension \"%s\"."
msgstr ""
-#: src/heap.c:167
+#: src/output.c:1051
#, c-format
-msgid "bad ordering of keys %d and %d\n"
+msgid "Bad dimension \"%s\"."
msgstr ""
-#: src/heap.c:177
-msgid "Heap contents:\n"
+#: src/output.c:1077
+#, c-format
+msgid "`x' expected in paper size `%s'."
msgstr ""
-#: src/html.c:66
+#: src/output.c:1087
#, c-format
-msgid "HTML driver initializing as `%s'..."
+msgid "Trailing garbage `%s' on paper size `%s'."
msgstr ""
-#: src/html.c:154
-#, c-format
-msgid "Unknown configuration parameter `%s' for HTML device driver."
+#: src/output.c:1136
+msgid "Paper size name must not be empty."
msgstr ""
-#: src/html.c:236
-msgid ""
-"Cannot find HTML prologue. The use of `-vv' on the command line is "
-"suggested as a debugging aid."
+#: src/output.c:1167
+msgid "Cannot find `papersize' configuration file."
msgstr ""
-#: src/html.c:241
+#: src/output.c:1171
#, c-format
-msgid "%s: %s: Opening HTML prologue..."
+msgid "%s: Opening paper size definition file..."
msgstr ""
-#: src/html.c:268 src/html.c:279 src/postscript.c:1355 src/postscript.c:1366
-msgid "nobody"
+#: src/output.c:1213
+msgid "Syntax error in paper size definition."
msgstr ""
-#: src/html.c:275 src/html.c:280 src/postscript.c:1362 src/postscript.c:1367
-msgid "nowhere"
+#: src/output.c:1242
+msgid "Paper size definition file read successfully."
msgstr ""
-#: src/html.c:339
-#, c-format
-msgid "%s: HTML prologue read successfully."
+#: src/output.c:1244
+msgid "Error reading paper size definition file."
msgstr ""
-#: src/html.c:343
+#: src/output.c:1313
#, c-format
-msgid "%s: Error reading HTML prologue."
+msgid "Error closing page on %s device of %s class."
msgstr ""
-#: src/html.c:371
+#: src/output.c:1317
#, c-format
-msgid "HTML output driver: %s: %s"
+msgid "Error opening page on %s device of %s class."
msgstr ""
-#: src/include.c:51
-msgid "Unrecognized filename format."
+#: src/percentiles.c:38
+msgid "HAverage"
msgstr ""
-#: src/inpt-pgm.c:83
-msgid "No matching INPUT PROGRAM command."
+#: src/percentiles.c:39
+msgid "Weighted Average"
msgstr ""
-#: src/inpt-pgm.c:88
-msgid ""
-"No data-input or transformation commands specified between INPUT PROGRAM and "
-"END INPUT PROGRAM."
+#: src/percentiles.c:40
+msgid "Rounded"
msgstr ""
-#: src/inpt-pgm.c:265 src/inpt-pgm.c:408
-msgid ""
-"This command may only be executed between INPUT PROGRAM and END INPUT "
-"PROGRAM."
+#: src/percentiles.c:41
+msgid "Empirical"
msgstr ""
-#: src/inpt-pgm.c:324
-msgid "COLUMN subcommand multiply specified."
+#: src/percentiles.c:42
+msgid "Empirical with averaging"
msgstr ""
-#: src/inpt-pgm.c:338
-msgid "expecting file handle name"
+#: src/permissions.c:76
+#, c-format
+msgid "Expecting %s or %s."
msgstr ""
-#: src/inpt-pgm.c:381
-msgid ""
-"REREAD: Column numbers must be positive finite numbers. Column set to 1."
+#: src/permissions.c:109
+#, c-format
+msgid "Cannot stat %s: %s"
msgstr ""
-#: src/lexer.c:216
+#: src/permissions.c:122
#, c-format
-msgid "%s does not form a valid number."
+msgid "Cannot change mode of %s: %s"
msgstr ""
-#: src/lexer.c:334
+#: src/pfm-read.c:85
#, c-format
-msgid "Bad character in input: `%c'."
+msgid "portable file %s corrupt at offset %ld: "
+msgstr ""
+
+#: src/pfm-read.c:112
+msgid "unexpected end of file"
msgstr ""
-#: src/lexer.c:336
+#: src/pfm-read.c:170
#, c-format
-msgid "Bad character in input: `\\%o'."
+msgid ""
+"An error occurred while opening \"%s\" for reading as a portable file: %s."
msgstr ""
-#: src/lexer.c:357
-msgid "Syntax error at end of file."
+#: src/pfm-read.c:188
+msgid "Data record expected."
msgstr ""
-#: src/lexer.c:367
-#, c-format
-msgid "Syntax error %s at `%s'."
+#: src/pfm-read.c:296
+msgid "Missing numeric terminator."
msgstr ""
-#: src/lexer.c:370
-#, c-format
-msgid "Syntax error at `%s'."
+#: src/pfm-read.c:319
+msgid "Invalid integer."
msgstr ""
-#: src/lexer.c:473
+#: src/pfm-read.c:330
#, c-format
-msgid "expecting `%s'"
+msgid "Bad string length %d."
msgstr ""
-#: src/lexer.c:490
+#: src/pfm-read.c:401
#, c-format
-msgid "expecting %s"
+msgid "%s: Not a portable file."
msgstr ""
-#: src/lexer.c:504
-msgid "expecting string"
+#: src/pfm-read.c:425
+#, c-format
+msgid "Bad date string length %d."
msgstr ""
-#: src/lexer.c:518
-msgid "expecting integer"
+#: src/pfm-read.c:427
+#, c-format
+msgid "Bad time string length %d."
msgstr ""
-#: src/lexer.c:532
-msgid "expecting number"
+#: src/pfm-read.c:465 src/sfm-read.c:981 src/sfm-read.c:989
+#, c-format
+msgid "%s: Bad format specifier byte (%d)."
msgstr ""
-#: src/lexer.c:546
-msgid "expecting identifier"
+#: src/pfm-read.c:472
+#, c-format
+msgid "%s variable %s has invalid format specifier %s."
msgstr ""
-#: src/lexer.c:682
-msgid "The rest of this command has been discarded."
+#: src/pfm-read.c:487
+msgid "Expected variable count record."
msgstr ""
-#: src/lexer.c:822 src/print.c:1174
-msgid "<ERROR>"
+#: src/pfm-read.c:491
+#, c-format
+msgid "Invalid number of variables %d."
msgstr ""
-#: src/lexer.c:948 src/pfm-read.c:132 src/repeat.c:226
-msgid "Unexpected end of file."
+#: src/pfm-read.c:501
+#, c-format
+msgid "Weight variable name (%s) truncated."
msgstr ""
-#: src/lexer.c:974
-msgid "binary"
+#: src/pfm-read.c:513
+msgid "Expected variable record."
msgstr ""
-#: src/lexer.c:974
-msgid "octal"
+#: src/pfm-read.c:517
+#, c-format
+msgid "Invalid variable width %d."
msgstr ""
-#: src/lexer.c:974
-msgid "hex"
+#: src/pfm-read.c:525
+#, c-format
+msgid "position %d: Invalid variable name `%s'."
msgstr ""
-#: src/lexer.c:988
+#: src/pfm-read.c:533
#, c-format
-msgid "String of %s digits has %d characters, which is not a multiple of %d."
+msgid "Duplicate variable name %s."
msgstr ""
-#: src/lexer.c:1017
+#: src/pfm-read.c:573
#, c-format
-msgid "`%c' is not a valid %s digit."
+msgid "Bad missing values for %s."
msgstr ""
-#: src/lexer.c:1048
-msgid "Unterminated string constant."
+#: src/pfm-read.c:591
+#, c-format
+msgid "Weighting variable %s not present in dictionary."
msgstr ""
-#: src/lexer.c:1120
+#: src/pfm-read.c:638
#, c-format
-msgid "String exceeds 255 characters in length (%d characters)."
+msgid "Unknown variable %s while parsing value labels."
msgstr ""
-#: src/lexer.c:1135
+#: src/pfm-read.c:641
+#, c-format
msgid ""
-"Sorry, literal strings may not contain null characters. Replacing with "
-"spaces."
+"Cannot assign value labels to %s and %s, which have different variable types "
+"or widths."
msgstr ""
-#: src/loop.c:201
-msgid "The index variable may not be a string variable."
+#: src/pfm-read.c:665
+#, c-format
+msgid "Duplicate label for value %g for variable %s."
msgstr ""
-#: src/loop.c:321
-msgid "There is no LOOP command that corresponds to this END LOOP."
+#: src/pfm-read.c:668
+#, c-format
+msgid "Duplicate label for value `%.*s' for variable %s."
msgstr ""
-#: src/loop.c:522
+#: src/pfm-write.c:93
+#, c-format
msgid ""
-"This command may only appear enclosed in a LOOP/END LOOP control structure."
-msgstr ""
-
-#: src/loop.c:528
-msgid "BREAK not enclosed in DO IF structure."
+"An error occurred while opening \"%s\" for writing as a portable file: %s."
msgstr ""
-#: src/loop.c:605
+#: src/pfm-write.c:155
#, c-format
-msgid "%s without %s."
+msgid "%s: Writing portable file: %s."
msgstr ""
-#: src/main.c:63
-msgid "Error initializing output drivers."
+#: src/pfm-write.c:493
+#, c-format
+msgid "%s: Closing portable file: %s."
msgstr ""
-#: src/main.c:124
-msgid "This command not executed."
+#: src/plot-hist.c:123
+msgid "HISTOGRAM"
msgstr ""
-#: src/main.c:128
-msgid ""
-"Skipping the rest of this command. Part of this command may have been "
-"executed."
+#: src/plot-hist.c:125 src/frequencies.q:1139
+msgid "Frequency"
msgstr ""
-#: src/main.c:133
-msgid ""
-"Skipping the rest of this command. This command was fully executed up to "
-"this point."
+#: src/postscript.c:326
+#, c-format
+msgid "PostScript driver initializing as `%s'..."
msgstr ""
-#: src/main.c:138
+#: src/postscript.c:450
+#, c-format
msgid ""
-"Trailing garbage was encountered following this command. The command was "
-"fully executed to this point."
-msgstr ""
-
-#: src/matrix-data.c:186
-msgid "VARIABLES subcommand multiply specified."
+"PostScript driver: The defined page is not long enough to hold margins and "
+"headers, plus least 15 lines of the default fonts. In fact, there's only "
+"room for %d lines of each font at the default size of %d.%03d points."
msgstr ""
-#: src/matrix-data.c:201
-msgid "VARNAME_ cannot be explicitly specified on VARIABLES."
+#: src/postscript.c:580
+#, c-format
+msgid "Unknown configuration parameter `%s' for PostScript device driver."
msgstr ""
-#: src/matrix-data.c:267
-msgid "in FORMAT subcommand"
+#: src/postscript.c:596
+#, c-format
+msgid ""
+"Unknown orientation `%s'. Valid orientations are `portrait' and `landscape'."
msgstr ""
-#: src/matrix-data.c:278
-msgid "SPLIT subcommand multiply specified."
+#: src/postscript.c:608
+msgid ""
+"Unknown value for `data'. Valid values are `clean7bit', `clean8bit', and "
+"`binary'."
msgstr ""
-#: src/matrix-data.c:285
-msgid "in SPLIT subcommand"
+#: src/postscript.c:617
+msgid "Unknown value for `line-ends'. Valid values are `lf' and `crlf'."
msgstr ""
-#: src/matrix-data.c:294
-msgid "Split variable may not be named ROWTYPE_ or VARNAME_."
+#: src/postscript.c:626
+msgid "Unknown value for `line-style'. Valid values are `thick' and `double'."
msgstr ""
-#: src/matrix-data.c:327
+#: src/postscript.c:689
#, c-format
-msgid "Split variable %s is already another type."
-msgstr ""
-
-#: src/matrix-data.c:342
-msgid "FACTORS subcommand multiply specified."
+msgid ""
+"Default font size must be at least 1 point (value of 1000 for key `%s')."
msgstr ""
-#: src/matrix-data.c:357
+#: src/postscript.c:721
#, c-format
-msgid "Factor variable %s is already another type."
-msgstr ""
-
-#: src/matrix-data.c:372
-msgid "CELLS subcommand multiply specified."
+msgid "Value for `%s' must be a dimension of positive length (i.e., `1in')."
msgstr ""
-#: src/matrix-data.c:378 src/matrix-data.c:397
-msgid "expecting positive integer"
+#: src/postscript.c:785
+#, c-format
+msgid "Nonnegative integer required as value for `%s'."
msgstr ""
-#: src/matrix-data.c:391
-msgid "N subcommand multiply specified."
+#: src/postscript.c:911
+#, c-format
+msgid "%s: %s: Opening PostScript font encoding..."
msgstr ""
-#: src/matrix-data.c:412
-msgid "CONTENTS subcommand multiply specified."
+#: src/postscript.c:917
+#, c-format
+msgid ""
+"PostScript driver: Cannot open encoding file `%s': %s. Substituting "
+"ISOLatin1Encoding for missing encoding."
msgstr ""
-#: src/matrix-data.c:432
-msgid "Nested parentheses not allowed."
+#: src/postscript.c:959
+msgid "PostScript driver: Invalid numeric format."
msgstr ""
-#: src/matrix-data.c:442
-msgid "Mismatched right parenthesis (`(')."
+#: src/postscript.c:964
+#, c-format
+msgid ""
+"PostScript driver: Codes must be between 0 and 255. (%d is not allowed.)"
msgstr ""
-#: src/matrix-data.c:447
-msgid "Empty parentheses not allowed."
+#: src/postscript.c:1000
+#, c-format
+msgid "PostScript driver: Error closing encoding file `%s'."
msgstr ""
-#: src/matrix-data.c:460 src/matrix-data.c:468
-msgid "in CONTENTS subcommand"
+#: src/postscript.c:1003
+#, c-format
+msgid "%s: PostScript font encoding read successfully."
msgstr ""
-#: src/matrix-data.c:475
+#: src/postscript.c:1097
#, c-format
-msgid "Content multiply specified for %s."
+msgid "%s: %s: Opening PostScript encoding list file."
msgstr ""
-#: src/matrix-data.c:492
-msgid "Missing right parenthesis."
+#: src/postscript.c:1130
+#, c-format
+msgid "%s: PostScript encoding list file read successfully."
msgstr ""
-#: src/matrix-data.c:512
-msgid "Missing VARIABLES subcommand."
+#: src/postscript.c:1144
+msgid "<<default encoding>>"
msgstr ""
-#: src/matrix-data.c:518
+#: src/postscript.c:1302
msgid ""
-"CONTENTS subcommand not specified: assuming file contains only CORR matrix."
+"Cannot find PostScript prologue. The use of `-vv' on the command line is "
+"suggested as a debugging aid."
msgstr ""
-#: src/matrix-data.c:528
-msgid ""
-"Missing CELLS subcommand. CELLS is required when ROWTYPE_ is not given in "
-"the data and factors are present."
+#: src/postscript.c:1307
+#, c-format
+msgid "%s: %s: Opening PostScript prologue..."
msgstr ""
-#: src/matrix-data.c:536
-msgid "Split file values must be present in the data when ROWTYPE_ is present."
+#: src/postscript.c:1479
+#, c-format
+msgid "%s: PostScript prologue read successfully."
msgstr ""
-#: src/matrix-data.c:592
-msgid "No continuous variables specified."
+#: src/postscript.c:1483
+#, c-format
+msgid "%s: Error reading PostScript prologue."
msgstr ""
-#: src/matrix-data.c:1006
+#: src/postscript.c:1653
#, c-format
-msgid "End of line expected %s while reading %s."
+msgid "PostScript output driver: %s: %s"
msgstr ""
-#: src/matrix-data.c:1193
+#: src/postscript.c:2337
#, c-format
-msgid "expecting value for %s %s"
+msgid "PostScript driver: Cannot find encoding `%s' for PostScript font `%s'."
msgstr ""
-#: src/matrix-data.c:1344
-#, c-format
-msgid "Syntax error expecting SPLIT FILE value %s."
+#: src/postscript.c:2885
+msgid "Charts are currently unsupported with postscript drivers."
msgstr ""
-#: src/matrix-data.c:1353
+#: src/print.c:365 src/print.c:382
#, c-format
-msgid "Expecting value %g for %s."
+msgid "%g is not a valid column location."
msgstr ""
-#: src/matrix-data.c:1391 src/matrix-data.c:1820
+#: src/print.c:376
#, c-format
-msgid "Syntax error expecting factor value %s."
+msgid "Column location expected following `%d-'."
msgstr ""
-#: src/matrix-data.c:1400
+#: src/print.c:387
#, c-format
-msgid "Syntax error expecting value %g for %s %s."
+msgid ""
+"%d-%ld is not a valid column range. The second column must be greater than "
+"or equal to the first."
msgstr ""
-#: src/matrix-data.c:1610
+#: src/print.c:488
#, c-format
-msgid "Syntax error %s expecting SPLIT FILE value."
+msgid "Variable %s has width %d so it cannot be output as format %s."
msgstr ""
-#: src/matrix-data.c:1734
+#: src/print.c:508
#, c-format
msgid ""
-"Expected %d lines of data for %s content; actually saw %d lines. No data "
-"will be output for this content."
+"%s is not of the same type as %s. To specify variables of different types "
+"in the same variable list, use a FORTRAN-like format specifier."
msgstr ""
-#: src/matrix-data.c:1765
-#, c-format
-msgid "Multiply specified ROWTYPE_ %s."
+#: src/print.c:538
+msgid ""
+"The ending column for a field must not be less than the starting column."
msgstr ""
-#: src/matrix-data.c:1770
-#, c-format
-msgid "Syntax error %s expecting ROWTYPE_ string."
+#: src/print.c:686
+msgid ""
+"The number of format specifications exceeds the number of variable names "
+"given."
msgstr ""
-#: src/matrix-data.c:1789
+#: src/print.c:838
#, c-format
-msgid "Syntax error %s."
+msgid "Writing %d record(s) to file %s."
msgstr ""
-#: src/matrix-data.c:1935
+#: src/print.c:841
#, c-format
-msgid "Duplicate specification for %s."
+msgid "Writing %d record(s) to the listing file."
msgstr ""
-#: src/matrix-data.c:1947
-#, c-format
-msgid "Too many rows of matrix data for %s."
+#: src/print.c:1088
+msgid "The expression on PRINT SPACE evaluated to the system-missing value."
msgstr ""
-#: src/matrix-data.c:1992
+#: src/print.c:1091
#, c-format
-msgid "Syntax error expecting value for %s %s."
+msgid "The expression on PRINT SPACE evaluated to %g."
msgstr ""
-#: src/mis-val.c:77
-msgid "`)' expected after value specification."
+#: src/recode.c:283
+#, c-format
+msgid ""
+"%d variable(s) cannot be recoded into %d variable(s). Specify the same "
+"number of variables as input and output variables."
msgstr ""
-#: src/mis-val.c:111
+#: src/recode.c:297
#, c-format
-msgid "`(' expected after variable name%s."
+msgid ""
+"There is no string variable named %s. (All string variables specified on "
+"INTO must already exist. Use the STRING command to create a string "
+"variable.)"
msgstr ""
-#: src/mis-val.c:123
-msgid "Long string value specified."
+#: src/recode.c:306
+#, c-format
+msgid ""
+"Type mismatch between input and output variables. Output variable %s is not "
+"a string variable, but all the input variables are string variables."
msgstr ""
-#: src/mis-val.c:128
-msgid "Short strings must be of equal width."
+#: src/recode.c:325
+#, c-format
+msgid "Type mismatch after INTO: %s is not a numeric variable."
msgstr ""
-#: src/mis-val.c:185
-#, c-format
-msgid "Range %g THRU %g is not valid because %g is greater than %g."
+#: src/recode.c:355
+msgid ""
+"INTO must be used when the input values are numeric and output values are "
+"string."
msgstr ""
-#: src/mis-val.c:216
-msgid "Number or range expected."
+#: src/recode.c:363
+msgid ""
+"INTO must be used when the input values are string and output values are "
+"numeric."
msgstr ""
-#: src/mis-val.c:249
-msgid "At most one range can exist in the missing values for any one variable."
+#: src/recode.c:486
+msgid "expecting output value"
msgstr ""
-#: src/mis-val.c:255
-msgid "At most one individual value can be missing along with one range."
+#: src/recode.c:500
+msgid ""
+"Inconsistent output types. The output values must be all numeric or all "
+"string."
msgstr ""
-#: src/mis-val.c:317
-msgid "String is not of proper length."
+#: src/recode.c:551
+msgid "following LO THRU"
msgstr ""
-#: src/mis-val.c:326 src/repeat.c:484
-msgid "String expected."
+#: src/recode.c:567 src/recode.c:596
+msgid "in source value"
msgstr ""
-#: src/mis-val.c:366
-msgid "Missing value:"
+#: src/recode.c:609
+msgid ""
+"Keyword CONVERT may only be used with string input values and numeric output "
+"values."
msgstr ""
-#: src/mis-val.c:371
-msgid "(long string variable)"
+#: src/rename-vars.c:48
+msgid ""
+"RENAME VARS may not be used after TEMPORARY. Temporary transformations will "
+"be made permanent."
msgstr ""
-#: src/mis-val.c:376
-msgid "(no missing values)\n"
+#: src/rename-vars.c:60
+msgid "`(' expected."
msgstr ""
-#: src/mis-val.c:399
-#, c-format
-msgid "(!!!INTERNAL ERROR--%d!!!)\n"
+#: src/rename-vars.c:68
+msgid "`=' expected between lists of new and old variable names."
msgstr ""
-#: src/modify-vars.c:108
-msgid "REORDER subcommand may be given at most once."
+#: src/rename-vars.c:86
+msgid "`)' expected after variable names."
msgstr ""
-#: src/modify-vars.c:131
-msgid "Cannot specify ALL after specifying a set of variables."
+#: src/rename-vars.c:96
+#, c-format
+msgid "Renaming would duplicate variable name %s."
msgstr ""
-#: src/modify-vars.c:141
-msgid "`(' expected on REORDER subcommand."
+#: src/repeat.c:151
+#, c-format
+msgid "Identifier %s is given twice."
msgstr ""
-#: src/modify-vars.c:153
-msgid "`)' expected following variable names on REORDER subcommand."
+#: src/repeat.c:194
+#, c-format
+msgid ""
+"There must be the same number of substitutions for each dummy variable "
+"specified. Since there were %d substitutions for %s, there must be %d for %"
+"s as well, but %d were specified."
msgstr ""
-#: src/modify-vars.c:171
-msgid "RENAME subcommand may be given at most once."
+#: src/repeat.c:299
+msgid "No commands in scope."
msgstr ""
-#: src/modify-vars.c:184
-msgid "`(' expected on RENAME subcommand."
+#: src/repeat.c:487
+msgid "No matching DO REPEAT."
msgstr ""
-#: src/modify-vars.c:192
-msgid ""
-"`=' expected between lists of new and old variable names on RENAME "
-"subcommand."
+#: src/sample.c:73
+msgid "The sampling factor must be between 0 and 1 exclusive."
msgstr ""
-#: src/modify-vars.c:200 src/rename-vars.c:70
+#: src/sample.c:93
#, c-format
-msgid ""
-"Differing number of variables in old name list (%d) and in new name list (%"
-"d)."
+msgid "Cannot sample %d observations from a population of %d."
msgstr ""
-#: src/modify-vars.c:211
-msgid "`)' expected after variable lists on RENAME subcommand."
+#: src/sel-if.c:100
+msgid "The filter variable must be numeric."
msgstr ""
-#: src/modify-vars.c:225
-msgid ""
-"KEEP subcommand may be given at most once. It may notbe given in "
-"conjunction with the DROP subcommand."
+#: src/sel-if.c:106
+msgid "The filter variable may not be scratch."
msgstr ""
-#: src/modify-vars.c:267
-msgid ""
-"DROP subcommand may be given at most once. It may not be given in "
-"conjunction with the KEEP subcommand."
+#: src/sel-if.c:137
+msgid "Only last instance of this command is in effect."
msgstr ""
-#: src/modify-vars.c:293
-#, c-format
-msgid "Unrecognized subcommand name `%s'."
+#: src/sfm-read.c:130
+msgid "corrupt system file: "
msgstr ""
-#: src/modify-vars.c:295
-msgid "Subcommand name expected."
+#: src/sfm-read.c:149 src/sfm-write.c:919
+#, c-format
+msgid "%s: Closing system file: %s."
msgstr ""
-#: src/modify-vars.c:303
-msgid "`/' or `.' expected."
+#: src/sfm-read.c:234
+#, c-format
+msgid ""
+"An error occurred while opening \"%s\" for reading as a system file: %s."
msgstr ""
-#: src/numeric.c:59
+#: src/sfm-read.c:252
#, c-format
-msgid "Format type %s may not be used with a numeric variable."
+msgid ""
+"%s: Weighting variable may not be a continuation of a long string variable."
msgstr ""
-#: src/numeric.c:78 src/numeric.c:161 src/vector.c:158
+#: src/sfm-read.c:255
#, c-format
-msgid "There is already a variable named %s."
+msgid "%s: Weighting variable may not be a string variable."
msgstr ""
-#: src/numeric.c:132
+#: src/sfm-read.c:280
#, c-format
-msgid "Format type %s may not be used with a string variable."
+msgid ""
+"%s: Orphaned variable index record (type 4). Type 4 records must always "
+"immediately follow type 3 records."
msgstr ""
-#: src/output.c:87
-msgid "Attempt to iterate driver list reentrantly."
+#: src/sfm-read.c:338
+#, c-format
+msgid "%s: Invalid subrecord length. Record: 7; Subrecord: 11"
msgstr ""
-#: src/output.c:164
+#: src/sfm-read.c:392
#, c-format
-msgid "Unknown output driver `%s'."
+msgid "%s: Trailing garbage in long variable name map."
msgstr ""
-#: src/output.c:166
+#: src/sfm-read.c:399
#, c-format
-msgid "Output driver `%s' referenced but never defined."
+msgid "%s: Long variable mapping to invalid variable name `%s'."
msgstr ""
-#: src/output.c:296
-msgid "Cannot find output initialization file. Use `-vv' to view search path."
+#: src/sfm-read.c:409
+#, c-format
+msgid "%s: Long variable mapping for nonexistent variable %s."
msgstr ""
-#: src/output.c:301
+#: src/sfm-read.c:437
#, c-format
-msgid "%s: Opening device description file..."
+msgid "%s: Unrecognized record type 7, subtype %d encountered in system file."
msgstr ""
-#: src/output.c:305 src/output.c:1165 src/postscript.c:1097
+#: src/sfm-read.c:462
#, c-format
-msgid "Opening %s: %s."
+msgid "%s: Unrecognized record type %d."
msgstr ""
-#: src/output.c:316 src/output.c:1176 src/postscript.c:1114
+#: src/sfm-read.c:494
#, c-format
-msgid "Reading %s: %s."
+msgid ""
+"%s: Bad size (%d) or count (%d) field on record type 7, subtype 3.\tExpected "
+"size %d, count 8."
msgstr ""
-#: src/output.c:338 src/output.c:490
-msgid "Syntax error."
+#: src/sfm-read.c:505
+#, c-format
+msgid ""
+"%s: Floating-point representation in system file is not IEEE-754. PSPP "
+"cannot convert between floating-point formats."
msgstr ""
-#: src/output.c:348 src/postscript.c:1125
+#: src/sfm-read.c:521
#, c-format
-msgid "Closing %s: %s."
+msgid ""
+"%s: File-indicated endianness (%s) does not match endianness intuited from "
+"file header (%s)."
msgstr ""
-#: src/output.c:353
-msgid "No output drivers are active."
+#: src/sfm-read.c:524 src/sfm-read.c:525
+msgid "big-endian"
msgstr ""
-#: src/output.c:356
-msgid "Device definition file read successfully."
+#: src/sfm-read.c:524 src/sfm-read.c:525
+msgid "little-endian"
msgstr ""
-#: src/output.c:358
-msgid "Error reading device definition file."
+#: src/sfm-read.c:526
+msgid "unknown"
msgstr ""
-#: src/output.c:462
-msgid ""
-"Driver classes:\n"
-"\t"
+#: src/sfm-read.c:530
+#, c-format
+msgid "%s: File-indicated character representation code (%s) is not ASCII."
msgstr ""
-#: src/output.c:591
-msgid "Syntax error in string constant."
+#: src/sfm-read.c:534
+msgid "DEC Kanji"
msgstr ""
-#: src/output.c:622
-msgid "Syntax error in options."
+#: src/sfm-read.c:550
+#, c-format
+msgid ""
+"%s: Bad size (%d) or count (%d) field on record type 7, subtype 4.\tExpected "
+"size %d, count 8."
msgstr ""
-#: src/output.c:632
-msgid "Syntax error in options (`=' expected)."
+#: src/sfm-read.c:565
+#, c-format
+msgid ""
+"%s: File-indicated value is different from internal value for at least one "
+"of the three system values. SYSMIS: indicated %g, expected %g; HIGHEST: %g, "
+"%g; LOWEST: %g, %g."
msgstr ""
-#: src/output.c:639
-msgid "Syntax error in options (value expected after `=')."
+#: src/sfm-read.c:592
+#, c-format
+msgid ""
+"%s: Bad magic. Proper system files begin with the four characters `$FL2'. "
+"This file will not be read."
msgstr ""
-#: src/output.c:711
-msgid "Driver name expected."
+#: src/sfm-read.c:634
+#, c-format
+msgid ""
+"%s: File layout code has unexpected value %d. Value should be 2, in big-"
+"endian or little-endian format."
msgstr ""
-#: src/output.c:732
-msgid "Class name expected."
+#: src/sfm-read.c:650
+#, c-format
+msgid "%s: Number of elements per case (%d) is not between 1 and %d."
msgstr ""
-#: src/output.c:741
+#: src/sfm-read.c:659
#, c-format
-msgid "Unknown output driver class `%s'."
+msgid ""
+"%s: Index of weighting variable (%d) is not between 0 and number of elements "
+"per case (%d)."
msgstr ""
-#: src/output.c:748
+#: src/sfm-read.c:666
#, c-format
-msgid "Can't initialize output driver class `%s'."
+msgid "%s: Number of cases in file (%ld) is not between -1 and %d."
msgstr ""
-#: src/output.c:755
+#: src/sfm-read.c:671
#, c-format
-msgid "Can't initialize output driver `%s' of class `%s'."
+msgid "%s: Compression bias (%g) is not the usual value of 100."
msgstr ""
-#: src/output.c:777
+#: src/sfm-read.c:766
#, c-format
-msgid "Unknown device type `%s'."
+msgid "%s: position %d: Bad record type (%d); the expected value was 2."
msgstr ""
-#: src/output.c:789
+#: src/sfm-read.c:776
#, c-format
-msgid "Can't complete initialization of output driver `%s' of class `%s'."
+msgid ""
+"%s: position %d: String variable does not have proper number of continuation "
+"records."
msgstr ""
-#: src/output.c:836
+#: src/sfm-read.c:785
#, c-format
-msgid "Can't deinitialize output driver class `%s'."
+msgid "%s: position %d: Superfluous long string continuation record."
msgstr ""
-#: src/output.c:909
+#: src/sfm-read.c:791
#, c-format
-msgid "Trying to find keyword `%s'...\n"
+msgid "%s: position %d: Bad variable type code %d."
msgstr ""
-#: src/output.c:1026
+#: src/sfm-read.c:794
#, c-format
-msgid "Unit \"%s\" is unknown in dimension \"%s\"."
+msgid "%s: position %d: Variable label indicator field is not 0 or 1."
msgstr ""
-#: src/output.c:1041
+#: src/sfm-read.c:798
#, c-format
-msgid "Bad dimension \"%s\"."
+msgid ""
+"%s: position %d: Missing value indicator field is not -3, -2, 0, 1, 2, or 3."
msgstr ""
-#: src/output.c:1067
+#: src/sfm-read.c:804
#, c-format
-msgid "`x' expected in paper size `%s'."
+msgid "%s: position %d: Variable name begins with invalid character."
msgstr ""
-#: src/output.c:1077
+#: src/sfm-read.c:808
#, c-format
-msgid "Trailing garbage `%s' on paper size `%s'."
+msgid "%s: position %d: Variable name begins with lowercase letter %c."
msgstr ""
-#: src/output.c:1126
-msgid "Paper size name must not be empty."
+#: src/sfm-read.c:812
+#, c-format
+msgid ""
+"%s: position %d: Variable name begins with octothorpe (`#'). Scratch "
+"variables should not appear in system files."
msgstr ""
-#: src/output.c:1157
-msgid "Cannot find `papersize' configuration file."
+#: src/sfm-read.c:827
+#, c-format
+msgid "%s: position %d: Variable name character %d is lowercase letter %c."
msgstr ""
-#: src/output.c:1161
+#: src/sfm-read.c:836
#, c-format
-msgid "%s: Opening paper size definition file..."
+msgid ""
+"%s: position %d: character `\\%03o' (%c) is not valid in a variable name."
msgstr ""
-#: src/output.c:1203
-msgid "Syntax error in paper size definition."
+#: src/sfm-read.c:845
+#, c-format
+msgid "%s: Duplicate variable name `%s' within system file."
msgstr ""
-#: src/output.c:1232
-msgid "Paper size definition file read successfully."
+#: src/sfm-read.c:867
+#, c-format
+msgid "%s: Variable %s indicates variable label of invalid length %d."
msgstr ""
-#: src/output.c:1234
-msgid "Error reading paper size definition file."
+#: src/sfm-read.c:887
+#, c-format
+msgid "%s: Long string variable %s may not have missing values."
msgstr ""
-#: src/output.c:1303
+#: src/sfm-read.c:912
#, c-format
-msgid "Error closing page on %s device of %s class."
+msgid ""
+"%s: String variable %s may not have missing values specified as a range."
msgstr ""
-#: src/output.c:1307
+#: src/sfm-read.c:960
#, c-format
-msgid "Error opening page on %s device of %s class."
+msgid "%s: Long string continuation records omitted at end of dictionary."
msgstr ""
-#: src/pfm-read.c:89
+#: src/sfm-read.c:964
#, c-format
-msgid "portable file %s corrupt at offset %ld: "
+msgid ""
+"%s: System file header indicates %d variable positions but %d were read from "
+"file."
msgstr ""
-#: src/pfm-read.c:108 src/pfm-write.c:501
+#: src/sfm-read.c:992
#, c-format
-msgid "%s: Closing portable file: %s."
+msgid "%s: %s variable %s has %s format specifier %s."
msgstr ""
-#: src/pfm-read.c:140
-msgid "Bad line end."
+#: src/sfm-read.c:1071
+#, c-format
+msgid ""
+"%s: Variable index record (type 4) does not immediately follow value label "
+"record (type 3) as it should."
msgstr ""
-#: src/pfm-read.c:221
+#: src/sfm-read.c:1082
#, c-format
-msgid "Cannot read file %s as portable file: already opened for %s."
+msgid ""
+"%s: Number of variables associated with a value label (%d) is not between 1 "
+"and the number of variables (%d)."
msgstr ""
-#: src/pfm-read.c:227
+#: src/sfm-read.c:1098
#, c-format
-msgid "%s: Opening portable-file handle %s for reading."
+msgid ""
+"%s: Variable index associated with value label (%d) is not between 1 and the "
+"number of values (%d)."
msgstr ""
-#: src/pfm-read.c:235
+#: src/sfm-read.c:1105
#, c-format
msgid ""
-"An error occurred while opening \"%s\" for reading as a portable file: %s."
+"%s: Variable index associated with value label (%d) refers to a continuation "
+"of a string variable, not to an actual variable."
msgstr ""
-#: src/pfm-read.c:269
-msgid "Data record expected."
+#: src/sfm-read.c:1110
+#, c-format
+msgid "%s: Value labels are not allowed on long string variables (%s)."
msgstr ""
-#: src/pfm-read.c:271
-msgid "Read portable-file dictionary successfully."
+#: src/sfm-read.c:1121
+#, c-format
+msgid ""
+"%s: Variables associated with value label are not all of identical type. "
+"Variable %s has %s type, but variable %s has %s type."
msgstr ""
-#: src/pfm-read.c:280
-msgid "Error reading portable-file dictionary."
+#: src/sfm-read.c:1162
+#, c-format
+msgid "%s: File contains duplicate label for value %g for variable %s."
msgstr ""
-#: src/pfm-read.c:378
-msgid "Missing numeric terminator."
+#: src/sfm-read.c:1166
+#, c-format
+msgid "%s: File contains duplicate label for value `%.*s' for variable %s."
msgstr ""
-#: src/pfm-read.c:415
-msgid "Bad integer format."
+#: src/sfm-read.c:1208 src/sfm-read.c:1472
+#, c-format
+msgid "%s: Reading system file: %s."
msgstr ""
-#: src/pfm-read.c:445
+#: src/sfm-read.c:1211 src/sfm-read.c:1313 src/sfm-read.c:1355
#, c-format
-msgid "Bad string length %d."
+msgid "%s: Unexpected end of file."
msgstr ""
-#: src/pfm-read.c:544
+#: src/sfm-read.c:1228
#, c-format
-msgid "Bad date string length %d."
+msgid "%s: System file contains multiple type 6 (document) records."
msgstr ""
-#: src/pfm-read.c:548
-msgid "Bad character in date."
+#: src/sfm-read.c:1234
+#, c-format
+msgid "%s: Number of document lines (%ld) must be greater than 0."
msgstr ""
-#: src/pfm-read.c:568
+#: src/sfm-read.c:1266
#, c-format
-msgid "Bad time string length %d."
+msgid "%s: Error reading file: %s."
msgstr ""
-#: src/pfm-read.c:572
-msgid "Bad character in time."
+#: src/sfm-read.c:1303
+#, c-format
+msgid "%s: Compressed data is corrupted. Data ends in partial case."
msgstr ""
-#: src/pfm-read.c:622 src/pfm-read.c:631 src/sfm-read.c:900 src/sfm-read.c:910
+#: src/sfm-read.c:1475
#, c-format
-msgid "%s: Bad format specifier byte (%d)."
+msgid "%s: Partial record at end of system file."
msgstr ""
-#: src/pfm-read.c:633
+#: src/sfm-write.c:154
#, c-format
-msgid "%s variable %s has %s format specifier %s."
+msgid "Error opening \"%s\" for writing as a system file: %s."
msgstr ""
-#: src/pfm-read.c:634 src/print.c:612 src/sfm-read.c:914
-msgid "String"
+#: src/sfm-write.c:739
+#, c-format
+msgid "%s: Writing system file: %s."
msgstr ""
-#: src/pfm-read.c:634 src/print.c:612 src/sfm-read.c:914
-msgid "Numeric"
+#: src/sort.c:103
+msgid "Buffer limit must be at least 2."
msgstr ""
-#: src/pfm-read.c:673
-msgid "Expected variable count record."
+#: src/sort.c:221
+msgid "`A' or `D' expected inside parentheses."
msgstr ""
-#: src/pfm-read.c:677
-#, c-format
-msgid "Invalid number of variables %d."
+#: src/sort.c:226
+msgid "`)' expected."
msgstr ""
-#: src/pfm-read.c:687
+#: src/sort.c:573
#, c-format
-msgid "Unexpected flag value %d."
+msgid ""
+"Out of memory. Could not allocate room for minimum of %d cases of %d bytes "
+"each. (PSPP workspace is currently restricted to a maximum of %d KB.)"
msgstr ""
-#: src/pfm-read.c:701
-#, c-format
-msgid "Weight variable name (%s) truncated."
+#: src/sysfile-info.c:96
+msgid "File:"
msgstr ""
-#: src/pfm-read.c:716
-msgid "Expected variable record."
+#: src/sysfile-info.c:98
+msgid "Label:"
msgstr ""
-#: src/pfm-read.c:722
-#, c-format
-msgid "Invalid variable width %d."
+#: src/sysfile-info.c:102
+msgid "No label."
msgstr ""
-#: src/pfm-read.c:740
-#, c-format
-msgid "position %d: Variable name has %u characters."
+#: src/sysfile-info.c:105
+msgid "Created:"
msgstr ""
-#: src/pfm-read.c:744
-#, c-format
-msgid "position %d: Variable name begins with invalid character."
+#: src/sysfile-info.c:108
+msgid "Endian:"
msgstr ""
-#: src/pfm-read.c:748
-#, c-format
-msgid "position %d: Variable name begins with lowercase letter %c."
+#: src/sysfile-info.c:109
+msgid "Big."
msgstr ""
-#: src/pfm-read.c:761
-#, c-format
-msgid "position %d: Variable name character %d is lowercase letter %c."
+#: src/sysfile-info.c:109
+msgid "Little."
msgstr ""
-#: src/pfm-read.c:771
-#, c-format
-msgid "position %d: character `\\%03o' is not valid in a variable name."
+#: src/sysfile-info.c:110
+msgid "Variables:"
msgstr ""
-#: src/pfm-read.c:782
-#, c-format
-msgid "Duplicate variable name %s."
+#: src/sysfile-info.c:113
+msgid "Cases:"
msgstr ""
-#: src/pfm-read.c:826
-#, c-format
-msgid "Bad missing values for %s."
+#: src/sysfile-info.c:116
+msgid "Type:"
msgstr ""
-#: src/pfm-read.c:849
-#, c-format
-msgid "Weighting variable %s not present in dictionary."
+#: src/sysfile-info.c:117
+msgid "System File."
msgstr ""
-#: src/pfm-read.c:922
-#, c-format
-msgid "Unknown variable %s while parsing value labels."
+#: src/sysfile-info.c:118
+msgid "Weight:"
msgstr ""
-#: src/pfm-read.c:925
-#, c-format
-msgid ""
-"Cannot assign value labels to %s and %s, which have different variable types "
-"or widths."
+#: src/sysfile-info.c:122
+msgid "Not weighted."
msgstr ""
-#: src/pfm-read.c:958
-#, c-format
-msgid "Duplicate label for value %g for variable %s."
+#: src/sysfile-info.c:124
+msgid "Mode:"
msgstr ""
-#: src/pfm-read.c:961
+#: src/sysfile-info.c:126
#, c-format
-msgid "Duplicate label for value `%.*s' for variable %s."
+msgid "Compression %s."
msgstr ""
-#: src/pfm-read.c:1031
-msgid "End of file midway through case."
+#: src/sysfile-info.c:126
+msgid "on"
msgstr ""
-#: src/pfm-read.c:1041
-msgid "reading as a portable file"
+#: src/sysfile-info.c:126
+msgid "off"
msgstr ""
-#: src/pfm-write.c:71
-#, c-format
-msgid "Cannot write file %s as portable file: already opened for %s."
+#: src/sysfile-info.c:135 src/sysfile-info.c:372
+msgid "Description"
msgstr ""
-#: src/pfm-write.c:77
-#, c-format
-msgid "%s: Opening portable-file handle %s for writing."
+#: src/sysfile-info.c:136 src/sysfile-info.c:370
+msgid "Position"
msgstr ""
-#: src/pfm-write.c:87
-#, c-format
-msgid ""
-"An error occurred while opening \"%s\" for writing as a portable file: %s."
+#: src/sysfile-info.c:193
+msgid "The active file does not have a file label."
msgstr ""
-#: src/pfm-write.c:123
-msgid "Wrote portable-file header successfully."
+#: src/sysfile-info.c:196
+msgid "File label:"
msgstr ""
-#: src/pfm-write.c:128
-msgid "Error writing portable-file header."
+#: src/sysfile-info.c:258
+msgid "No variables to display."
msgstr ""
-#: src/pfm-write.c:168
-#, c-format
-msgid "%s: Writing portable file: %s."
+#: src/sysfile-info.c:277
+msgid "Macros not supported."
msgstr ""
-#: src/pfm-write.c:510
-msgid "writing as a portable file"
+#: src/sysfile-info.c:287
+msgid "The active file dictionary does not contain any documents."
msgstr ""
-#: src/postscript.c:323
-#, c-format
-msgid "PostScript driver initializing as `%s'..."
+#: src/sysfile-info.c:296
+msgid "Documents in the active file:"
msgstr ""
-#: src/postscript.c:447
-#, c-format
-msgid ""
-"PostScript driver: The defined page is not long enough to hold margins and "
-"headers, plus least 15 lines of the default fonts. In fact, there's only "
-"room for %d lines of each font at the default size of %d.%03d points."
+#: src/sysfile-info.c:374 src/sysfile-info.c:532 src/vfm.c:811
+msgid "Label"
msgstr ""
-#: src/postscript.c:577
+#: src/sysfile-info.c:446
#, c-format
-msgid "Unknown configuration parameter `%s' for PostScript device driver."
+msgid "Format: %s"
msgstr ""
-#: src/postscript.c:593
+#: src/sysfile-info.c:453
#, c-format
-msgid ""
-"Unknown orientation `%s'. Valid orientations are `portrait' and `landscape'."
-msgstr ""
-
-#: src/postscript.c:605
-msgid ""
-"Unknown value for `data'. Valid values are `clean7bit', `clean8bit', and "
-"`binary'."
+msgid "Print Format: %s"
msgstr ""
-#: src/postscript.c:614
-msgid "Unknown value for `line-ends'. Valid values are `lf' and `crlf'."
+#: src/sysfile-info.c:456
+#, c-format
+msgid "Write Format: %s"
msgstr ""
-#: src/postscript.c:623
-msgid "Unknown value for `line-style'. Valid values are `thick' and `double'."
+#: src/sysfile-info.c:464
+msgid "Missing Values: "
msgstr ""
-#: src/postscript.c:685
-#, c-format
-msgid ""
-"Default font size must be at least 1 point (value of 1000 for key `%s')."
+#: src/sysfile-info.c:531 src/vfm.c:810 src/crosstabs.q:1099
+#: src/crosstabs.q:1126 src/crosstabs.q:1146 src/crosstabs.q:1168
+#: src/examine.q:1130 src/frequencies.q:1138 src/frequencies.q:1259
+msgid "Value"
msgstr ""
-#: src/postscript.c:717
-#, c-format
-msgid "Value for `%s' must be a dimension of positive length (i.e., `1in')."
+#: src/sysfile-info.c:588
+msgid "No vectors defined."
msgstr ""
-#: src/postscript.c:780
-#, c-format
-msgid "Nonnegative integer required as value for `%s'."
+#: src/sysfile-info.c:603
+msgid "Vector"
msgstr ""
-#: src/postscript.c:906
+#: src/tab.c:254
#, c-format
-msgid "%s: %s: Opening PostScript font encoding..."
+msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
msgstr ""
-#: src/postscript.c:912
+#: src/tab.c:329
#, c-format
msgid ""
-"PostScript driver: Cannot open encoding file `%s': %s. Substituting "
-"ISOLatin1Encoding for missing encoding."
+"bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
msgstr ""
-#: src/postscript.c:954
-msgid "PostScript driver: Invalid numeric format."
+#: src/temporary.c:46
+msgid "This command is not valid inside DO IF or LOOP."
msgstr ""
-#: src/postscript.c:959
-#, c-format
+#: src/temporary.c:53
msgid ""
-"PostScript driver: Codes must be between 0 and 255. (%d is not allowed.)"
+"This command may only appear once between procedures and procedure-like "
+"commands."
msgstr ""
-#: src/postscript.c:995
+#: src/title.c:56
#, c-format
-msgid "PostScript driver: Error closing encoding file `%s'."
+msgid "%s before: %s\n"
msgstr ""
-#: src/postscript.c:998
-#, c-format
-msgid "%s: PostScript font encoding read successfully."
+#: src/title.c:56
+msgid "<none>"
msgstr ""
-#: src/postscript.c:1092
+#: src/title.c:68
#, c-format
-msgid "%s: %s: Opening PostScript encoding list file."
+msgid "%s: `.' expected after string."
msgstr ""
-#: src/postscript.c:1127
+#: src/title.c:84
#, c-format
-msgid "%s: PostScript encoding list file read successfully."
-msgstr ""
-
-#: src/postscript.c:1141
-msgid "<<default encoding>>"
+msgid "%s after: %s\n"
msgstr ""
-#: src/postscript.c:1299
-msgid ""
-"Cannot find PostScript prologue. The use of `-vv' on the command line is "
-"suggested as a debugging aid."
+#: src/title.c:140
+#, c-format
+msgid "Document entered %s %02d:%02d:%02d by %s (%s):"
msgstr ""
-#: src/postscript.c:1304
+#: src/val-labs.c:118
#, c-format
-msgid "%s: %s: Opening PostScript prologue..."
+msgid ""
+"It is not possible to assign value labels to long string variables such as %"
+"s."
msgstr ""
-#: src/postscript.c:1476
+#: src/val-labs.c:167
#, c-format
-msgid "%s: PostScript prologue read successfully."
+msgid "Value label `%g' is not integer."
msgstr ""
-#: src/postscript.c:1480
-#, c-format
-msgid "%s: Error reading PostScript prologue."
+#: src/val-labs.c:177
+msgid "Truncating value label to 60 characters."
msgstr ""
-#: src/postscript.c:1650
-#, c-format
-msgid "PostScript output driver: %s: %s"
+#: src/var-labs.c:47
+msgid "String expected for variable label."
msgstr ""
-#: src/postscript.c:2334
-#, c-format
-msgid "PostScript driver: Cannot find encoding `%s' for PostScript font `%s'."
+#: src/var-labs.c:53
+msgid "Truncating variable label to 255 characters."
msgstr ""
-#: src/print.c:190
-msgid "expecting a valid subcommand"
+#: src/vars-atr.c:259
+msgid "Variable name cannot be empty string."
msgstr ""
-#: src/print.c:370 src/print.c:387
+#: src/vars-atr.c:265
#, c-format
-msgid "%g is not a valid column location."
+msgid "Variable name %s exceeds %d-character limit."
msgstr ""
-#: src/print.c:381
+#: src/vars-atr.c:274
#, c-format
-msgid "Column location expected following `%d-'."
+msgid "Character `%c' (in %s) may not appear in a variable name."
msgstr ""
-#: src/print.c:392
+#: src/vars-atr.c:283
#, c-format
msgid ""
-"%d-%ld is not a valid column range. The second column must be greater than "
-"or equal to the first."
+"Character `%c' (in %s), may not appear as the first character in a variable "
+"name."
msgstr ""
-#: src/print.c:498
+#: src/vars-atr.c:291
#, c-format
-msgid ""
-"%s is not of the same type as %s. To specify variables of different types "
-"in the same variable list, use a FORTRAN-like format specifier."
+msgid "%s may not be used as a variable name because it is a reserved word."
msgstr ""
-#: src/print.c:528
-msgid ""
-"The ending column for a field must not be less than the starting column."
+#: src/vars-atr.c:386
+msgid "Variable suffix too large."
msgstr ""
-#: src/print.c:611
-#, c-format
-msgid "%s variables cannot be displayed with format %s."
+#: src/vars-prs.c:43
+msgid "expecting variable name"
msgstr ""
-#: src/print.c:698
+#: src/vars-prs.c:49
#, c-format
-msgid "Display format %s may not be used with a %s variable."
+msgid "%s is not a variable name."
msgstr ""
-#: src/print.c:848
-#, c-format
-msgid "Writing %3d records to file %s."
+#: src/vars-prs.c:111
+msgid "ordinary"
msgstr ""
-#: src/print.c:849
-#, c-format
-msgid "Writing %3d records to the listing file."
+#: src/vars-prs.c:113
+msgid "system"
msgstr ""
-#: src/print.c:1063
-msgid "A file name or handle was expected in the OUTFILE subcommand."
+#: src/vars-prs.c:115
+msgid "scratch"
msgstr ""
-#: src/print.c:1115
+#: src/vars-prs.c:174
#, c-format
msgid ""
-"The expression on PRINT SPACE evaluated to %d. It's not possible to PRINT "
-"SPACE a negative number of lines."
+"%s is not a numeric variable. It will not be included in the variable list."
msgstr ""
-#: src/recode.c:288
+#: src/vars-prs.c:177
#, c-format
msgid ""
-"%d variable(s) cannot be recoded into %d variable(s). Specify the same "
-"number of variables as input and output variables."
+"%s is not a string variable. It will not be included in the variable list."
+msgstr ""
+
+#: src/vars-prs.c:181
+#, c-format
+msgid "Scratch variables (such as %s) are not allowed here."
msgstr ""
-#: src/recode.c:302
+#: src/vars-prs.c:184
#, c-format
msgid ""
-"There is no string variable named %s. (All string variables specified on "
-"INTO must already exist. Use the STRING command to create a string "
-"variable.)"
+"%s and %s are not the same type. All variables in this variable list must "
+"be of the same type. %s will be omitted from list."
msgstr ""
-#: src/recode.c:311
+#: src/vars-prs.c:189
#, c-format
-msgid ""
-"Type mismatch between input and output variables. Output variable %s is not "
-"a string variable, but all the input variables are string variables."
+msgid "Variable %s appears twice in variable list."
msgstr ""
-#: src/recode.c:330
+#: src/vars-prs.c:299
#, c-format
-msgid "Type mismatch after INTO: %s is not a numeric variable."
+msgid "%s TO %s is not valid syntax since %s precedes %s in the dictionary."
msgstr ""
-#: src/recode.c:360
+#: src/vars-prs.c:308
+#, c-format
msgid ""
-"INTO must be used when the input values are numeric and output values are "
-"string."
+"When using the TO keyword to specify several variables, both variables must "
+"be from the same variable dictionaries, of either ordinary, scratch, or "
+"system variables. %s is a %s variable, whereas %s is %s."
msgstr ""
-#: src/recode.c:368
-msgid ""
-"INTO must be used when the input values are string and output values are "
-"numeric."
+#: src/vars-prs.c:379
+msgid "incorrect use of TO convention"
msgstr ""
-#: src/recode.c:504
-msgid ""
-"Inconsistent output types. The output values must be all numeric or all "
-"string."
+#: src/vars-prs.c:422
+msgid "Scratch variables not allowed here."
msgstr ""
-#: src/recode.c:555
-msgid "following LO THRU"
+#: src/vars-prs.c:444
+msgid "Prefixes don't match in use of TO convention."
msgstr ""
-#: src/recode.c:571 src/recode.c:600
-msgid "in source value"
+#: src/vars-prs.c:449
+msgid "Bad bounds in use of TO convention."
msgstr ""
-#: src/recode.c:613
-msgid ""
-"Keyword CONVERT may only be used with string input values and numeric output "
-"values."
+#: src/vector.c:67
+#, c-format
+msgid "Vector name %s is given twice."
msgstr ""
-#: src/recode.c:869
-msgid "!!END!!"
+#: src/vector.c:73
+#, c-format
+msgid "There is already a vector with name %s."
msgstr ""
-#: src/recode.c:890 src/recode.c:906
-msgid "!!ERROR!!"
+#: src/vector.c:94
+msgid ""
+"A slash must be used to separate each vector specification when using the "
+"long form. Commands such as VECTOR A,B=Q1 TO Q20 are not supported."
msgstr ""
-#: src/rename-vars.c:55
-msgid "`(' expected."
+#: src/vector.c:128
+msgid "Vectors must have at least one element."
msgstr ""
-#: src/rename-vars.c:63
-msgid "`=' expected between lists of new and old variable names."
+#: src/vector.c:142
+#, c-format
+msgid "%s%d is too long for a variable name."
msgstr ""
-#: src/rename-vars.c:81
-msgid "`)' expected after variable names."
+#: src/vector.c:181
+msgid ""
+"The syntax for this command does not match the expected syntax for either "
+"the long form or the short form of VECTOR."
msgstr ""
-#: src/rename-vars.c:91
-#, c-format
-msgid "Renaming would duplicate variable name %s."
+#: src/weight.c:53
+msgid "The weighting variable must be numeric."
msgstr ""
-#: src/repeat.c:159
-#, c-format
-msgid "Identifier %s is given twice."
+#: src/weight.c:58
+msgid "The weighting variable may not be scratch."
msgstr ""
-#: src/repeat.c:202
-#, c-format
+#: src/crosstabs.q:261
msgid ""
-"There must be the same number of substitutions for each dummy variable "
-"specified. Since there were %d substitutions for %s, there must be %d for %"
-"s as well, but %d were specified."
+"Missing mode REPORT not allowed in general mode. Assuming MISSING=TABLE."
msgstr ""
-#: src/repeat.c:311
-msgid "No commands in scope."
+#: src/crosstabs.q:271
+msgid "Write mode ALL not allowed in general mode. Assuming WRITE=CELLS."
msgstr ""
-#: src/repeat.c:511
-msgid "No matching DO REPEAT."
+#: src/crosstabs.q:332
+msgid "expecting BY"
msgstr ""
-#: src/sample.c:71
-msgid "The sampling factor must be between 0 and 1 exclusive."
+#: src/crosstabs.q:399
+msgid "VARIABLES must be specified before TABLES."
msgstr ""
-#: src/sample.c:91
+#: src/crosstabs.q:436
#, c-format
-msgid "Cannot sample %d observations from a population of %d."
-msgstr ""
-
-#: src/sel-if.c:102
-msgid "The filter variable must be numeric."
+msgid "Maximum value (%ld) less than minimum value (%ld)."
msgstr ""
-#: src/sel-if.c:108
-msgid "The filter variable may not be scratch."
+#: src/crosstabs.q:800
+msgid "Summary."
msgstr ""
-#: src/sel-if.c:142
-msgid "Only last instance of this command is in effect."
+#: src/crosstabs.q:802 src/examine.q:915
+msgid "Cases"
msgstr ""
-#: src/sfm-read.c:150
-msgid "corrupt system file: "
+#: src/crosstabs.q:803 src/examine.q:849 src/frequencies.q:1136
+#: src/frequencies.q:1509
+msgid "Valid"
msgstr ""
-#: src/sfm-read.c:166 src/sfm-write.c:740
-#, c-format
-msgid "%s: Closing system file: %s."
+#: src/crosstabs.q:804 src/examine.q:850 src/frequencies.q:1204
+#: src/frequencies.q:1510
+msgid "Missing"
msgstr ""
-#: src/sfm-read.c:239
-#, c-format
-msgid "Cannot read file %s as system file: already opened for %s."
+#: src/crosstabs.q:805 src/crosstabs.q:1008 src/crosstabs.q:1722
+#: src/examine.q:851 src/frequencies.q:1213 src/oneway.q:307 src/oneway.q:470
+msgid "Total"
msgstr ""
-#: src/sfm-read.c:244
-#, c-format
-msgid "%s: Opening system-file handle %s for reading."
+#: src/crosstabs.q:815 src/examine.q:927 src/frequencies.q:1508
+#: src/oneway.q:393 src/t-test.q:675 src/t-test.q:698 src/t-test.q:823
+#: src/t-test.q:1358
+msgid "N"
msgstr ""
-#: src/sfm-read.c:252
-#, c-format
-msgid ""
-"An error occurred while opening \"%s\" for reading as a system file: %s."
+#: src/crosstabs.q:816 src/examine.q:930 src/frequencies.q:1140
+#: src/frequencies.q:1141 src/frequencies.q:1142
+msgid "Percent"
msgstr ""
-#: src/sfm-read.c:286
-#, c-format
-msgid ""
-"%s: Weighting variable may not be a continuation of a long string variable."
+#: src/crosstabs.q:1058
+msgid "count"
msgstr ""
-#: src/sfm-read.c:289
-#, c-format
-msgid "%s: Weighting variable may not be a string variable."
+#: src/crosstabs.q:1059
+msgid "row %"
msgstr ""
-#: src/sfm-read.c:314
-#, c-format
-msgid ""
-"%s: Orphaned variable index record (type 4). Type 4 records must always "
-"immediately follow type 3 records."
+#: src/crosstabs.q:1060
+msgid "column %"
msgstr ""
-#: src/sfm-read.c:369
-#, c-format
-msgid "%s: Unrecognized record type 7, subtype %d encountered in system file."
+#: src/crosstabs.q:1061
+msgid "total %"
msgstr ""
-#: src/sfm-read.c:393
-#, c-format
-msgid "%s: Unrecognized record type %d."
+#: src/crosstabs.q:1062
+msgid "expected"
msgstr ""
-#: src/sfm-read.c:399
-msgid "Read system-file dictionary successfully."
+#: src/crosstabs.q:1063
+msgid "residual"
msgstr ""
-#: src/sfm-read.c:409
-msgid "Error reading system-file header."
+#: src/crosstabs.q:1064
+msgid "std. resid."
msgstr ""
-#: src/sfm-read.c:433
-#, c-format
-msgid ""
-"%s: Bad size (%d) or count (%d) field on record type 7, subtype 3.\tExpected "
-"size %d, count 8."
+#: src/crosstabs.q:1065
+msgid "adj. resid."
msgstr ""
-#: src/sfm-read.c:445
-#, c-format
-msgid ""
-"%s: Floating-point representation in system file is not IEEE-754. PSPP "
-"cannot convert between floating-point formats."
+#: src/crosstabs.q:1098 src/crosstabs.q:1125 src/crosstabs.q:1145
+#: src/crosstabs.q:1166 src/examine.q:1361
+msgid "Statistic"
msgstr ""
-#: src/sfm-read.c:460
-#, c-format
-msgid ""
-"%s: File-indicated endianness (%s) does not match endianness intuited from "
-"file header (%s)."
+#: src/crosstabs.q:1100 src/oneway.q:280 src/oneway.q:682 src/t-test.q:973
+#: src/t-test.q:1165 src/t-test.q:1257
+msgid "df"
msgstr ""
-#: src/sfm-read.c:462 src/sfm-read.c:463
-msgid "big-endian"
+#: src/crosstabs.q:1102
+msgid "Asymp. Sig. (2-sided)"
msgstr ""
-#: src/sfm-read.c:462 src/sfm-read.c:463
-msgid "little-endian"
+#: src/crosstabs.q:1104
+msgid "Exact. Sig. (2-sided)"
msgstr ""
-#: src/sfm-read.c:464
-msgid "unknown"
+#: src/crosstabs.q:1106
+msgid "Exact. Sig. (1-sided)"
msgstr ""
-#: src/sfm-read.c:468
-#, c-format
-msgid "%s: File-indicated character representation code (%s) is not ASCII."
+#: src/crosstabs.q:1124 src/crosstabs.q:1165
+msgid "Category"
msgstr ""
-#: src/sfm-read.c:470
-msgid "DEC Kanji"
+#: src/crosstabs.q:1127 src/crosstabs.q:1169
+msgid "Asymp. Std. Error"
msgstr ""
-#: src/sfm-read.c:489
-#, c-format
-msgid ""
-"%s: Bad size (%d) or count (%d) field on record type 7, subtype 4.\tExpected "
-"size %d, count 8."
+#: src/crosstabs.q:1128 src/crosstabs.q:1170
+msgid "Approx. T"
msgstr ""
-#: src/sfm-read.c:504
-#, c-format
-msgid ""
-"%s: File-indicated value is different from internal value for at least one "
-"of the three system values. SYSMIS: indicated %g, expected %g; HIGHEST: %g, "
-"%g; LOWEST: %g, %g."
+#: src/crosstabs.q:1129 src/crosstabs.q:1171
+msgid "Approx. Sig."
msgstr ""
-#: src/sfm-read.c:535
+#: src/crosstabs.q:1144
#, c-format
-msgid ""
-"%s: Bad magic. Proper system files begin with the four characters `$FL2'. "
-"This file will not be read."
+msgid " 95%% Confidence Interval"
msgstr ""
-#: src/sfm-read.c:578
-#, c-format
-msgid ""
-"%s: File layout code has unexpected value %d. Value should be 2, in big-"
-"endian or little-endian format."
+#: src/crosstabs.q:1147 src/t-test.q:977 src/t-test.q:1162 src/t-test.q:1260
+msgid "Lower"
msgstr ""
-#: src/sfm-read.c:594
-#, c-format
-msgid "%s: Number of elements per case (%d) is not between 1 and %d."
+#: src/crosstabs.q:1148 src/t-test.q:978 src/t-test.q:1163 src/t-test.q:1261
+msgid "Upper"
msgstr ""
-#: src/sfm-read.c:601
-#, c-format
-msgid ""
-"%s: Index of weighting variable (%d) is not between 0 and number of elements "
-"per case (%d)."
+#: src/crosstabs.q:1167
+msgid "Type"
msgstr ""
-#: src/sfm-read.c:607
-#, c-format
-msgid "%s: Number of cases in file (%ld) is not between -1 and %d."
+#: src/crosstabs.q:1916
+msgid "Pearson Chi-Square"
msgstr ""
-#: src/sfm-read.c:612
-#, c-format
-msgid "%s: Compression bias (%g) is not the usual value of 100."
+#: src/crosstabs.q:1917
+msgid "Likelihood Ratio"
msgstr ""
-#: src/sfm-read.c:705
-#, c-format
-msgid "%s: position %d: Bad record type (%d); the expected value was 2."
+#: src/crosstabs.q:1918
+msgid "Fisher's Exact Test"
msgstr ""
-#: src/sfm-read.c:714
-#, c-format
-msgid ""
-"%s: position %d: String variable does not have proper number of continuation "
-"records."
+#: src/crosstabs.q:1919
+msgid "Continuity Correction"
msgstr ""
-#: src/sfm-read.c:722
-#, c-format
-msgid "%s: position %d: Superfluous long string continuation record."
+#: src/crosstabs.q:1920
+msgid "Linear-by-Linear Association"
msgstr ""
-#: src/sfm-read.c:727
-#, c-format
-msgid "%s: position %d: Bad variable type code %d."
+#: src/crosstabs.q:1957 src/crosstabs.q:2027 src/crosstabs.q:2086
+msgid "N of Valid Cases"
msgstr ""
-#: src/sfm-read.c:730
-#, c-format
-msgid "%s: position %d: Variable label indicator field is not 0 or 1."
+#: src/crosstabs.q:1973 src/crosstabs.q:2102
+msgid "Nominal by Nominal"
msgstr ""
-#: src/sfm-read.c:734
-#, c-format
-msgid ""
-"%s: position %d: Missing value indicator field is not -3, -2, 0, 1, 2, or 3."
+#: src/crosstabs.q:1974 src/crosstabs.q:2103
+msgid "Ordinal by Ordinal"
msgstr ""
-#: src/sfm-read.c:740
-#, c-format
-msgid "%s: position %d: Variable name begins with invalid character."
+#: src/crosstabs.q:1975
+msgid "Interval by Interval"
msgstr ""
-#: src/sfm-read.c:743
-#, c-format
-msgid "%s: position %d: Variable name begins with lowercase letter %c."
+#: src/crosstabs.q:1976
+msgid "Measure of Agreement"
msgstr ""
-#: src/sfm-read.c:746
-#, c-format
-msgid ""
-"%s: position %d: Variable name begins with octothorpe (`#'). Scratch "
-"variables should not appear in system files."
+#: src/crosstabs.q:1981
+msgid "Phi"
msgstr ""
-#: src/sfm-read.c:760
-#, c-format
-msgid "%s: position %d: Variable name character %d is lowercase letter %c."
+#: src/crosstabs.q:1982
+msgid "Cramer's V"
msgstr ""
-#: src/sfm-read.c:768
-#, c-format
-msgid ""
-"%s: position %d: character `\\%03o' (%c) is not valid in a variable name."
+#: src/crosstabs.q:1983
+msgid "Contingency Coefficient"
msgstr ""
-#: src/sfm-read.c:776
-#, c-format
-msgid "%s: Duplicate variable name `%s' within system file."
+#: src/crosstabs.q:1984
+msgid "Kendall's tau-b"
msgstr ""
-#: src/sfm-read.c:801
-#, c-format
-msgid "%s: Variable %s indicates variable label of invalid length %d."
+#: src/crosstabs.q:1985
+msgid "Kendall's tau-c"
msgstr ""
-#: src/sfm-read.c:817
-#, c-format
-msgid "%s: Long string variable %s may not have missing values."
+#: src/crosstabs.q:1986
+msgid "Gamma"
msgstr ""
-#: src/sfm-read.c:841
-#, c-format
-msgid ""
-"%s: String variable %s may not have missing values specified as a range."
+#: src/crosstabs.q:1987
+msgid "Spearman Correlation"
msgstr ""
-#: src/sfm-read.c:878
-#, c-format
-msgid "%s: Long string continuation records omitted at end of dictionary."
+#: src/crosstabs.q:1988
+msgid "Pearson's R"
msgstr ""
-#: src/sfm-read.c:881
-#, c-format
-msgid ""
-"%s: System file header indicates %d variable positions but %d were read from "
-"file."
+#: src/crosstabs.q:1989
+msgid "Kappa"
msgstr ""
-#: src/sfm-read.c:913
+#: src/crosstabs.q:2059
#, c-format
-msgid "%s: %s variable %s has %s format specifier %s."
+msgid "Odds Ratio for %s (%g / %g)"
msgstr ""
-#: src/sfm-read.c:992
+#: src/crosstabs.q:2062
#, c-format
-msgid ""
-"%s: Variable index record (type 4) does not immediately follow value label "
-"record (type 3) as it should."
+msgid "Odds Ratio for %s (%.*s / %.*s)"
msgstr ""
-#: src/sfm-read.c:1002
+#: src/crosstabs.q:2070
#, c-format
-msgid ""
-"%s: Number of variables associated with a value label (%d) is not between 1 "
-"and the number of variables (%d)."
+msgid "For cohort %s = %g"
msgstr ""
-#: src/sfm-read.c:1018
+#: src/crosstabs.q:2073
#, c-format
-msgid ""
-"%s: Variable index associated with value label (%d) is not between 1 and the "
-"number of values (%d)."
+msgid "For cohort %s = %.*s"
msgstr ""
-#: src/sfm-read.c:1025
-#, c-format
-msgid ""
-"%s: Variable index associated with value label (%d) refers to a continuation "
-"of a string variable, not to an actual variable."
+#: src/crosstabs.q:2104
+msgid "Nominal by Interval"
msgstr ""
-#: src/sfm-read.c:1029
-#, c-format
-msgid "%s: Value labels are not allowed on long string variables (%s)."
+#: src/crosstabs.q:2109
+msgid "Lambda"
msgstr ""
-#: src/sfm-read.c:1039
-#, c-format
-msgid ""
-"%s: Variables associated with value label are not all of identical type. "
-"Variable %s has %s type, but variable %s has %s type."
+#: src/crosstabs.q:2110
+msgid "Goodman and Kruskal tau"
msgstr ""
-#: src/sfm-read.c:1079
-#, c-format
-msgid "%s: File contains duplicate label for value %g for variable %s."
+#: src/crosstabs.q:2111
+msgid "Uncertainty Coefficient"
msgstr ""
-#: src/sfm-read.c:1082
-#, c-format
-msgid "%s: File contains duplicate label for value `%.*s' for variable %s."
+#: src/crosstabs.q:2112
+msgid "Somers' d"
msgstr ""
-#: src/sfm-read.c:1119 src/sfm-read.c:1394
-#, c-format
-msgid "%s: Reading system file: %s."
+#: src/crosstabs.q:2113
+msgid "Eta"
msgstr ""
-#: src/sfm-read.c:1121 src/sfm-read.c:1303 src/sfm-read.c:1344
-#, c-format
-msgid "%s: Unexpected end of file."
+#: src/crosstabs.q:2118
+msgid "Symmetric"
msgstr ""
-#: src/sfm-read.c:1139
+#: src/crosstabs.q:2119 src/crosstabs.q:2120
#, c-format
-msgid "%s: System file contains multiple type 6 (document) records."
+msgid "%s Dependent"
msgstr ""
-#: src/sfm-read.c:1144
+#: src/examine.q:467 src/examine.q:479
#, c-format
-msgid "%s: Number of document lines (%ld) must be greater than 0."
+msgid "%s and %s are mutually exclusive"
msgstr ""
-#: src/sfm-read.c:1168
-msgid "dictionary:\n"
+#: src/examine.q:909
+msgid "Case Processing Summary"
msgstr ""
-#: src/sfm-read.c:1176
-msgid "num"
+#: src/examine.q:1115
+msgid "Extreme Values"
msgstr ""
-#: src/sfm-read.c:1177
-msgid "str"
+#: src/examine.q:1131
+msgid "Case Number"
msgstr ""
-#: src/sfm-read.c:1180
-msgid "left"
+#: src/examine.q:1216
+msgid "Highest"
msgstr ""
-#: src/sfm-read.c:1180
-msgid "right"
+#: src/examine.q:1221
+msgid "Lowest"
msgstr ""
-#: src/sfm-read.c:1186
-msgid "none"
+#: src/examine.q:1362 src/oneway.q:396 src/oneway.q:680
+msgid "Std. Error"
msgstr ""
-#: src/sfm-read.c:1190
-msgid "one"
+#: src/examine.q:1364 src/oneway.q:410
+msgid "Descriptives"
msgstr ""
-#: src/sfm-read.c:1194
-msgid "two"
+#: src/examine.q:1484 src/oneway.q:401
+#, c-format
+msgid "%g%% Confidence Interval for Mean"
msgstr ""
-#: src/sfm-read.c:1198
-msgid "three"
+#: src/examine.q:1490 src/oneway.q:403
+msgid "Lower Bound"
msgstr ""
-#: src/sfm-read.c:1206
-msgid "low"
+#: src/examine.q:1501 src/oneway.q:404
+msgid "Upper Bound"
msgstr ""
-#: src/sfm-read.c:1210
-msgid "high"
+#: src/examine.q:1513
+#, c-format
+msgid "5%% Trimmed Mean"
msgstr ""
-#: src/sfm-read.c:1214
-msgid "range+1"
+#: src/examine.q:1524 src/frequencies.q:114
+msgid "Median"
msgstr ""
-#: src/sfm-read.c:1218
-msgid "low+1"
+#: src/examine.q:1558 src/oneway.q:395 src/t-test.q:677 src/t-test.q:700
+#: src/t-test.q:824 src/t-test.q:1160
+msgid "Std. Deviation"
msgstr ""
-#: src/sfm-read.c:1222
-msgid "high+1"
+#: src/examine.q:1606
+msgid "Interquartile Range"
msgstr ""
-#: src/sfm-read.c:1256
+#: src/examine.q:1758
#, c-format
-msgid "%s: Error reading file: %s."
+msgid "Boxplot of %s vs. %s"
msgstr ""
-#: src/sfm-read.c:1294
-#, c-format
-msgid "%s: Compressed data is corrupted. Data ends partway through a case."
+#: src/examine.q:1783
+msgid "Boxplot"
msgstr ""
-#: src/sfm-read.c:1396
+#: src/examine.q:1825
#, c-format
-msgid "%s: Partial record at end of system file."
+msgid "Normal Q-Q Plot of %s"
msgstr ""
-#: src/sfm-read.c:1434
-msgid "reading as a system file"
+#: src/examine.q:1826 src/examine.q:1832
+msgid "Observed Value"
msgstr ""
-#: src/sfm-write.c:96
-#, c-format
-msgid "Cannot write file %s as system file: already opened for %s."
+#: src/examine.q:1827
+msgid "Expected Normal"
msgstr ""
-#: src/sfm-write.c:101
+#: src/examine.q:1830
#, c-format
-msgid "%s: Opening system-file handle %s for writing."
+msgid "Detrended Normal Q-Q Plot of %s"
msgstr ""
-#: src/sfm-write.c:111
-#, c-format
-msgid ""
-"An error occurred while opening \"%s\" for writing as a system file: %s."
+#: src/examine.q:1833
+msgid "Dev from Normal"
msgstr ""
-#: src/sfm-write.c:164
-msgid "Wrote system-file header successfully."
+#: src/examine.q:1952 src/examine.q:1974 src/frequencies.q:1520
+msgid "Percentiles"
msgstr ""
-#: src/sfm-write.c:169
-msgid "Error writing system-file header."
+#: src/examine.q:2099
+msgid "Tukey's Hinges"
msgstr ""
-#: src/sfm-write.c:604
+#: src/file-handle.q:124
#, c-format
-msgid "%s: Writing system file: %s."
+msgid ""
+"File handle %s already refers to file %s. File handles cannot be redefined "
+"within a session."
msgstr ""
-#: src/sfm-write.c:750
-msgid "writing as a system file"
+#: src/file-handle.q:145
+msgid "The FILE HANDLE required subcommand NAME is not present."
msgstr ""
-#: src/sort.c:124
-msgid "`A' or `D' expected inside parentheses."
+#: src/file-handle.q:164
+msgid ""
+"Fixed-length records were specified on /RECFORM, but record length was not "
+"specified on /LRECL. Assuming 1024-character records."
msgstr ""
-#: src/sort.c:130
-msgid "`)' expected."
+#: src/file-handle.q:171
+#, c-format
+msgid ""
+"Record length (%ld) must be at least one byte. 1-character records will be "
+"assumed."
msgstr ""
-#: src/sort.c:452
+#: src/file-handle.q:271
#, c-format
-msgid "%s: Cannot create temporary directory: %s."
+msgid "Can't open %s as a %s because it is already open as a %s"
msgstr ""
-#: src/sort.c:476
+#: src/file-handle.q:278
#, c-format
-msgid "%s: Error removing directory for temporary files: %s."
+msgid "Can't open %s as a %s for %s because it is already open for %s"
msgstr ""
-#: src/sort.c:522
+#: src/file-handle.q:286
#, c-format
-msgid ""
-"Out of memory. Could not allocate room for minimum of %d cases of %d bytes "
-"each. (PSPP workspace is currently restricted to a maximum of %d KB.)"
+msgid "Can't re-open %s as a %s for %s"
msgstr ""
-#: src/sort.c:534
-#, c-format
-msgid "allocated %d cases == %d bytes\n"
+#: src/file-handle.q:339
+msgid "expecting a file name or handle name"
msgstr ""
-#: src/sort.c:572
-#, c-format
-msgid "%s: Error writing temporary file: %s."
+#: src/frequencies.q:113
+msgid "S.E. Mean"
msgstr ""
-#: src/sort.c:584
-#, c-format
-msgid "SORT: Closing handle %d."
+#: src/frequencies.q:115
+msgid "Mode"
msgstr ""
-#: src/sort.c:590 src/sort.c:815
-#, c-format
-msgid "%s: Error closing temporary file: %s."
+#: src/frequencies.q:119
+msgid "S.E. Kurt"
msgstr ""
-#: src/sort.c:612 src/sort.c:628
-#, c-format
-msgid "SORT: %s: Opening for writing as run %d."
+#: src/frequencies.q:121
+msgid "S.E. Skew"
msgstr ""
-#: src/sort.c:634
-#, c-format
-msgid "%s: Error opening temporary file for reading: %s."
+#: src/frequencies.q:396
+msgid ""
+"At most one of BARCHART, HISTOGRAM, or HBAR should be given. HBAR will be "
+"assumed. Argument values will be given precedence increasing along the "
+"order given."
msgstr ""
-#: src/sort.c:660 src/sort.c:676
+#: src/frequencies.q:479
#, c-format
-msgid "%s: Error creating temporary file: %s."
+msgid ""
+"MAX must be greater than or equal to MIN, if both are specified. However, "
+"MIN was specified as %g and MAX as %g. MIN and MAX will be ignored."
msgstr ""
-#: src/sort.c:819 src/sort.c:981 src/sort.c:1031 src/sort.c:1203
-#: src/sort.c:1210
-#, c-format
-msgid "%s: Error removing temporary file: %s."
+#: src/frequencies.q:802
+msgid ""
+"Upper limit of integer mode value range must be greater than lower limit."
msgstr ""
-#: src/sort.c:963
-msgid "merging runs"
+#: src/frequencies.q:815
+#, c-format
+msgid "Variable %s specified multiple times on VARIABLES subcommand."
msgstr ""
-#: src/sort.c:971
+#: src/frequencies.q:821
#, c-format
-msgid " into run %d(%d)\n"
+msgid "Integer mode specified, but %s is not a numeric variable."
msgstr ""
-#: src/sort.c:990
-msgid "Out of memory expanding Huffman priority queue."
+#: src/frequencies.q:887
+msgid "`)' expected after GROUPED interval list."
msgstr ""
-#: src/sort.c:1042
+#: src/frequencies.q:899
#, c-format
-msgid "%s: Error creating temporary file for merge: %s."
+msgid "Variables %s specified on GROUPED but not on VARIABLES."
msgstr ""
-#: src/sort.c:1070 src/sort.c:1130
+#: src/frequencies.q:906
#, c-format
-msgid "%s: Error reading temporary file in merge: %s."
+msgid "Variables %s specified multiple times on GROUPED subcommand."
msgstr ""
-#: src/sort.c:1073 src/sort.c:1134
-#, c-format
-msgid "%s: Unexpected end of temporary file in merge."
+#: src/frequencies.q:1137 src/frequencies.q:1229 src/frequencies.q:1230
+#: src/frequencies.q:1262
+msgid "Cum"
msgstr ""
-#: src/sort.c:1099
-#, c-format
-msgid "%s: Error writing temporary file in merge: %s."
+#: src/frequencies.q:1159
+msgid "Value Label"
msgstr ""
-#: src/sort.c:1150 src/sort.c:1183
-#, c-format
-msgid "%s: Error closing temporary file in merge: %s."
+#: src/frequencies.q:1260
+msgid "Freq"
msgstr ""
-#: src/sort.c:1155
-#, c-format
-msgid "%s: Error removing temporary file in merge: %s."
+#: src/frequencies.q:1261 src/frequencies.q:1263
+msgid "Pct"
msgstr ""
-#: src/sort.c:1254
+#: src/frequencies.q:1482
#, c-format
-msgid "%s: Cannot open sort result file: %s."
+msgid "No valid data for variable %s; statistics not displayed."
msgstr ""
-#: src/sort.c:1265
+#: src/list.q:150
#, c-format
-msgid "%s: Error reading sort result file: %s."
+msgid ""
+"The first case (%ld) specified precedes the last case (%ld) specified. The "
+"values will be swapped."
msgstr ""
-#: src/sort.c:1268
+#: src/list.q:158
#, c-format
-msgid "%s: Unexpected end of sort result file: %s."
+msgid ""
+"The first case (%ld) to list is less than 1. The value is being reset to 1."
msgstr ""
-#: src/sort.c:1279
+#: src/list.q:164
#, c-format
-msgid "%s: Error closing sort result file: %s."
+msgid ""
+"The last case (%ld) to list is less than 1. The value is being reset to 1."
msgstr ""
-#: src/sort.c:1283
+#: src/list.q:170
#, c-format
-msgid "%s: Error removing sort result file: %s."
+msgid "The step value %ld is less than 1. The value is being reset to 1."
msgstr ""
-#: src/sysfile-info.c:97
-msgid "File:"
+#: src/list.q:197
+msgid "`/FORMAT WEIGHT' specified, but weighting is not on."
msgstr ""
-#: src/sysfile-info.c:99
-msgid "Label:"
+#: src/list.q:438
+msgid "Line"
msgstr ""
-#: src/sysfile-info.c:103
-msgid "No label."
+#: src/means.q:100
+msgid "Missing required subcommand TABLES."
msgstr ""
-#: src/sysfile-info.c:106
-msgid "Created:"
+#: src/means.q:134
+msgid "TABLES subcommand may not appear more than once."
msgstr ""
-#: src/sysfile-info.c:109
-msgid "Endian:"
+#: src/oneway.q:170
+msgid "Number of contrast coefficients must equal the number of groups"
msgstr ""
-#: src/sysfile-info.c:110
-msgid "Big."
+#: src/oneway.q:179
+#, c-format
+msgid "Coefficients for contrast %d do not total zero"
msgstr ""
-#: src/sysfile-info.c:110
-msgid "Little."
+#: src/oneway.q:244
+#, c-format
+msgid "`%s' is not a variable name"
msgstr ""
-#: src/sysfile-info.c:111
-msgid "Variables:"
+#: src/oneway.q:279
+msgid "Sum of Squares"
msgstr ""
-#: src/sysfile-info.c:114
-msgid "Cases:"
+#: src/oneway.q:281
+msgid "Mean Square"
msgstr ""
-#: src/sysfile-info.c:117
-msgid "Type:"
+#: src/oneway.q:282 src/t-test.q:970
+msgid "F"
msgstr ""
-#: src/sysfile-info.c:118
-msgid "System File."
+#: src/oneway.q:283 src/oneway.q:536
+msgid "Significance"
msgstr ""
-#: src/sysfile-info.c:119
-msgid "Weight:"
+#: src/oneway.q:305
+msgid "Between Groups"
msgstr ""
-#: src/sysfile-info.c:123
-msgid "Not weighted."
+#: src/oneway.q:306
+msgid "Within Groups"
msgstr ""
-#: src/sysfile-info.c:125
-msgid "Mode:"
+#: src/oneway.q:353
+msgid "ANOVA"
msgstr ""
-#: src/sysfile-info.c:127
-#, c-format
-msgid "Compression %s."
+#: src/oneway.q:533
+msgid "Levene Statistic"
msgstr ""
-#: src/sysfile-info.c:127
-msgid "on"
+#: src/oneway.q:534
+msgid "df1"
msgstr ""
-#: src/sysfile-info.c:127
-msgid "off"
+#: src/oneway.q:535
+msgid "df2"
msgstr ""
-#: src/sysfile-info.c:136 src/sysfile-info.c:377
-msgid "Description"
+#: src/oneway.q:539
+msgid "Test of Homogeneity of Variances"
msgstr ""
-#: src/sysfile-info.c:137 src/sysfile-info.c:374
-msgid "Position"
+#: src/oneway.q:609
+msgid "Contrast Coefficients"
msgstr ""
-#: src/sysfile-info.c:196
-msgid "The active file does not have a file label."
+#: src/oneway.q:611 src/oneway.q:678
+msgid "Contrast"
msgstr ""
-#: src/sysfile-info.c:199
-msgid "File label:"
+#: src/oneway.q:676
+msgid "Contrast Tests"
msgstr ""
-#: src/sysfile-info.c:261
-msgid "No variables to display."
+#: src/oneway.q:679
+msgid "Value of Contrast"
msgstr ""
-#: src/sysfile-info.c:280
-msgid "Macros not supported."
+#: src/oneway.q:681 src/t-test.q:972 src/t-test.q:1164 src/t-test.q:1256
+msgid "t"
msgstr ""
-#: src/sysfile-info.c:290
-msgid "The active file dictionary does not contain any documents."
+#: src/oneway.q:683 src/t-test.q:974 src/t-test.q:1166 src/t-test.q:1258
+msgid "Sig. (2-tailed)"
msgstr ""
-#: src/sysfile-info.c:299
-msgid "Documents in the active file:"
+#: src/oneway.q:727
+msgid "Assume equal variances"
msgstr ""
-#: src/sysfile-info.c:379 src/sysfile-info.c:537 src/vfm.c:1095
-msgid "Label"
+#: src/oneway.q:731
+msgid "Does not assume equal"
msgstr ""
-#: src/sysfile-info.c:451
+#: src/set.q:221 src/set.q:300 src/set.q:343 src/set.q:398 src/set.q:400
+#: src/set.q:402 src/set.q:404 src/set.q:406 src/set.q:408 src/set.q:410
+#: src/set.q:412 src/set.q:414 src/set.q:416 src/set.q:418 src/set.q:420
+#: src/set.q:422 src/set.q:828 src/set.q:909 src/set.q:1004
#, c-format
-msgid "Format: %s"
+msgid "%s is obsolete."
msgstr ""
-#: src/sysfile-info.c:458
-#, c-format
-msgid "Print Format: %s"
+#: src/set.q:229
+msgid "LISTING is ON"
msgstr ""
-#: src/sysfile-info.c:461
-#, c-format
-msgid "Write Format: %s"
+#: src/set.q:231
+msgid "LISTING is OFF"
msgstr ""
-#: src/sysfile-info.c:469
-msgid "Missing Values: "
+#: src/set.q:245
+#, c-format
+msgid "EPOCH is %d"
msgstr ""
-#: src/sysfile-info.c:593
-msgid "No vectors defined."
+#: src/set.q:264
+msgid "Journalling is off"
msgstr ""
-#: src/sysfile-info.c:608
-msgid "Vector"
+#: src/set.q:431
+msgid ""
+"CASE is not implemented and probably won't be. If you care, complain about "
+"it."
msgstr ""
-#: src/tab.c:259
-#, c-format
-msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
+#: src/set.q:436
+msgid "Active file compression is not yet implemented (and probably won't be)."
msgstr ""
-#: src/tab.c:295
+#: src/set.q:450
#, c-format
-msgid "bad hline: x=(%d+%d=%d,%d+%d=%d) y=%d+%d=%d in table size (%d,%d)\n"
+msgid ""
+"CC%c: Length of custom currency string `%s' (%d) exceeds maximum length of "
+"16."
msgstr ""
-#: src/tab.c:335
+#: src/set.q:472
#, c-format
msgid ""
-"bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
+"CC%c: Custom currency string `%s' does not contain exactly three periods or "
+"commas (not both)."
msgstr ""
-#: src/temporary.c:49
-msgid "This command is not valid inside DO IF or LOOP."
+#: src/set.q:525
+msgid "None"
msgstr ""
-#: src/temporary.c:56
-msgid ""
-"This command may only appear once between procedures and procedure-like "
-"commands."
+#: src/set.q:531
+msgid "Disabled"
msgstr ""
-#: src/title.c:55
-#, c-format
-msgid "%s before: %s\n"
+#: src/set.q:536
+msgid "Screen"
msgstr ""
-#: src/title.c:55
-msgid "<none>"
+#: src/set.q:543
+msgid "Listing"
msgstr ""
-#: src/title.c:67
-#, c-format
-msgid "%s: `.' expected after string."
+#: src/set.q:550
+msgid "Other"
msgstr ""
-#: src/title.c:82
-#, c-format
-msgid "%s after: %s\n"
+#: src/set.q:659
+msgid "EPOCH must be 1500 or later."
msgstr ""
-#: src/title.c:137
-#, c-format
-msgid "Document entered %s %02d:%02d:%02d by %s (%s):"
+#: src/set.q:666
+msgid "expecting AUTOMATIC or year"
msgstr ""
-#: src/val-labs.c:138
-#, c-format
-msgid ""
-"It is not possible to assign value labels to long string variables such as %"
-"s."
+#: src/set.q:687
+msgid "LENGTH must be at least 1."
msgstr ""
-#: src/val-labs.c:176
-msgid "String expected for value."
+#: src/set.q:726
+msgid "Missing identifier in RESULTS subcommand."
msgstr ""
-#: src/val-labs.c:185
-msgid "Number expected for value."
+#: src/set.q:737
+msgid "Unrecognized identifier in RESULTS subcommand."
msgstr ""
-#: src/val-labs.c:189
-#, c-format
-msgid "Value label `%g' is not integer."
+#: src/set.q:774
+msgid "WIDTH must be at least 1."
msgstr ""
-#: src/val-labs.c:199
-msgid "Truncating value label to 60 characters."
+#: src/set.q:797
+#, c-format
+msgid ""
+"FORMAT requires numeric output format as an argument. Specified format %s "
+"is of type string."
msgstr ""
-#: src/val-labs.c:220
-msgid "Value labels:"
-msgstr ""
+#: src/set.q:841
+msgid "Text color must be in range 0-15."
+msgstr "Text colour must be in range 0-15."
-#: src/val-labs.c:237
-msgid " (no value labels)\n"
-msgstr ""
+#: src/set.q:854
+msgid "Background color must be in range 0-7."
+msgstr "Background colour must be in range 0-7."
-#: src/var-labs.c:53
-msgid "String expected for variable label."
-msgstr ""
+#: src/set.q:865
+msgid "Border color must be in range 0-7."
+msgstr "Border colour must be in range 0-7."
+
+#: src/set.q:921
+msgid "Lower window color must be between 0 and 6."
+msgstr "Lower window colour must be between 0 and 6."
+
+#: src/set.q:935
+msgid "Upper window color must be between 0 and 6."
+msgstr "Upper window colour must be between 0 and 6."
+
+#: src/set.q:947
+msgid "Frame color must be between 0 and 6."
+msgstr "Frame colour must be between 0 and 6."
-#: src/var-labs.c:59
-msgid "Truncating variable label to 120 characters."
+#: src/set.q:1013
+msgid "Drive letter expected in WORKDEV subcommand."
msgstr ""
-#: src/var-labs.c:87
-msgid "Variable labels:\n"
+#: src/set.q:1045
+msgid "Specify a terminal type with the TERM environment variable."
msgstr ""
-#: src/var-labs.c:94
-msgid "(no variable label)"
+#: src/set.q:1051
+msgid "Could not access the termcap data base."
msgstr ""
-#: src/vars-prs.c:46
+#: src/set.q:1053
#, c-format
-msgid "%s is not a variable name."
+msgid "Terminal type `%s' is not defined."
msgstr ""
-#: src/vars-prs.c:194
-#, c-format
-msgid "%s TO %s is not valid syntax since %s precedes %s in the dictionary."
+#: src/set.q:1111
+msgid "data> "
msgstr ""
-#: src/vars-prs.c:204
-#, c-format
-msgid ""
-"When using the TO keyword to specify several variables, both variables must "
-"be from the same variable dictionaries, of either ordinary, scratch, or "
-"system variables. %s is a %s variable, whereas %s is %s."
+#: src/t-test.q:265
+msgid "TESTVAL, GROUPS and PAIRS subcommands are mutually exclusive."
msgstr ""
-#: src/vars-prs.c:222
-#, c-format
-msgid "Scratch variables (such as %s) are not allowed here."
+#: src/t-test.q:283
+msgid "VARIABLES subcommand is not appropriate with PAIRS"
msgstr ""
-#: src/vars-prs.c:245
-#, c-format
-msgid ""
-"%s is not a numeric variable. It will not be included in the variable list."
+#: src/t-test.q:321
+msgid "One or more VARIABLES must be specified."
msgstr ""
-#: src/vars-prs.c:248
+#: src/t-test.q:372
#, c-format
-msgid ""
-"%s is not a string variable. It will not be included in the variable list."
+msgid "Long string variable %s is not valid here."
msgstr ""
-#: src/vars-prs.c:252
-#, c-format
+#: src/t-test.q:392 src/t-test.q:407
msgid ""
-"%s and %s are not the same type. All variables in this variable list must "
-"be of the same type. %s will be omitted from list."
+"When applying GROUPS to a string variable, two values must be specified."
msgstr ""
-#: src/vars-prs.c:257
+#: src/t-test.q:479
#, c-format
-msgid "Variable %s appears twice in variable list."
+msgid ""
+"PAIRED was specified but the number of variables preceding WITH (%d) did not "
+"match the number following (%d)."
msgstr ""
-#: src/vars-prs.c:334
-msgid "incorrect use of TO convention"
+#: src/t-test.q:496
+msgid "At least two variables must be specified on PAIRS."
msgstr ""
-#: src/vars-prs.c:380
-msgid "Scratch variables not allowed here."
+#: src/t-test.q:673
+msgid "One-Sample Statistics"
msgstr ""
-#: src/vars-prs.c:402
-msgid "Prefixes don't match in use of TO convention."
+#: src/t-test.q:678 src/t-test.q:701 src/t-test.q:825
+msgid "SE. Mean"
msgstr ""
-#: src/vars-prs.c:407
-msgid "Bad bounds in use of TO convention."
+#: src/t-test.q:695
+msgid "Group Statistics"
msgstr ""
-#: src/vector.c:69
-#, c-format
-msgid "Vector name %s is given twice."
+#: src/t-test.q:819
+msgid "Paired Sample Statistics"
msgstr ""
-#: src/vector.c:75
+#: src/t-test.q:841 src/t-test.q:1185 src/t-test.q:1375
#, c-format
-msgid "There is already a vector with name %s."
+msgid "Pair %d"
msgstr ""
-#: src/vector.c:96
-msgid ""
-"A slash must be used to separate each vector specification when using the "
-"long form. Commands such as VECTOR A,B=Q1 TO Q20 are not supported."
+#: src/t-test.q:958
+msgid "Independent Samples Test"
msgstr ""
-#: src/vector.c:130
-msgid "Vectors must have at least one element."
+#: src/t-test.q:966
+msgid "Levene's Test for Equality of Variances"
msgstr ""
-#: src/vector.c:144
-#, c-format
-msgid "%s%d is too long for a variable name."
+#: src/t-test.q:968
+msgid "t-test for Equality of Means"
msgstr ""
-#: src/vector.c:184
-msgid ""
-"The syntax for this command does not match the expected syntax for either "
-"the long form or the short form of VECTOR."
+#: src/t-test.q:971 src/t-test.q:1360
+msgid "Sig."
msgstr ""
-#: src/vfm.c:293
-#, c-format
-msgid ""
-"Workspace overflow predicted. Max workspace is currently set to %d KB (%d "
-"cases at %d bytes each). Paging active file to disk."
+#: src/t-test.q:975 src/t-test.q:1259
+msgid "Mean Difference"
msgstr ""
-#: src/vfm.c:365
-msgid "<NOVAR>"
+#: src/t-test.q:976
+msgid "Std. Error Difference"
msgstr ""
-#: src/vfm.c:612
+#: src/t-test.q:981 src/t-test.q:1156 src/t-test.q:1251
#, c-format
-msgid ""
-"An error occurred attempting to create a temporary file for use as the "
-"active file: %s."
+msgid "%g%% Confidence Interval of the Difference"
msgstr ""
-#: src/vfm.c:630
-#, c-format
-msgid ""
-"An error occurred while attempting to read from a temporary file created for "
-"the active file: %s."
+#: src/t-test.q:1036
+msgid "Equal variances assumed"
msgstr ""
-#: src/vfm.c:658
-#, c-format
-msgid ""
-"An error occurred while attempting to write to a temporary file used as the "
-"active file: %s."
+#: src/t-test.q:1088
+msgid "Equal variances not assumed"
msgstr ""
-#: src/vfm.c:672
-#, c-format
-msgid ""
-"An error occurred while attempting to rewind a temporary file used as the "
-"active file: %s."
+#: src/t-test.q:1146
+msgid "Paired Samples Test"
msgstr ""
-#: src/vfm.c:787
-msgid "Virtual memory exhausted. Paging active file to disk."
+#: src/t-test.q:1149
+msgid "Paired Differences"
msgstr ""
-#: src/vfm.c:790
-#, c-format
-msgid ""
-"Workspace limit of %d KB (%d cases at %d bytes each) overflowed. Paging "
-"active file to disk."
+#: src/t-test.q:1161
+msgid "Std. Error Mean"
msgstr ""
-#: src/vfm.c:814 src/vfm.c:851
+#: src/t-test.q:1240
+msgid "One-Sample Test"
+msgstr ""
+
+#: src/t-test.q:1245
#, c-format
-msgid ""
-"An error occurred while attempting to write to a temporary file created as "
-"the active file, while paging to disk: %s."
+msgid "Test Value = %f"
msgstr ""
-#: src/vfm.c:965
-msgid "transform: "
+#: src/t-test.q:1355
+msgid "Paired Samples Correlations"
msgstr ""
-#: src/weight.c:61
-msgid "The weighting variable must be numeric."
+#: src/t-test.q:1359
+msgid "Correlation"
msgstr ""
-#: src/weight.c:66
-msgid "The weighting variable may not be scratch."
+#: src/t-test.q:1378
+#, c-format
+msgid "%s & %s"
msgstr ""
+
+#, fuzzy
+#~ msgid "Week argument to WKYR must be in range 0 to 53."
+#~ msgstr "Text colour must be in range 0-15."
+
+#, fuzzy
+#~ msgid "Percentiles must be between 0 and 100."
+#~ msgstr "Frame colour must be between 0 and 6."
projects / pspp-builds.git / blobdiff