%{
/* Parse a string into an internal time stamp.
- Copyright (C) 1999, 2000, 2002, 2003, 2004 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
+ Copyright (C) 1999, 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
+ Free Software Foundation, Inc.
+
+ This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
/* Originally written by Steven M. Bellovin <smb@research.att.com> while
at the University of North Carolina at Chapel Hill. Later tweaked by
/* FIXME: Check for arithmetic overflow in all cases, not just
some of them. */
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
+#include <config.h>
#include "getdate.h"
+#include "intprops.h"
+#include "timespec.h"
+#include "verify.h"
+
/* There's no need to extend the stack, so there's no need to involve
alloca. */
#define YYSTACK_USE_ALLOCA 0
# undef static
#endif
-#include <ctype.h>
+#include <c-ctype.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
-#include "setenv.h"
#include "xalloc.h"
-#if STDC_HEADERS || (! defined isascii && ! HAVE_ISASCII)
-# define IN_CTYPE_DOMAIN(c) 1
-#else
-# define IN_CTYPE_DOMAIN(c) isascii (c)
-#endif
-
-#define ISSPACE(c) (IN_CTYPE_DOMAIN (c) && isspace (c))
-#define ISALPHA(c) (IN_CTYPE_DOMAIN (c) && isalpha (c))
-#define ISLOWER(c) (IN_CTYPE_DOMAIN (c) && islower (c))
/* ISDIGIT differs from isdigit, as follows:
- - Its arg may be any int or unsigned int; it need not be an unsigned char.
- - It's guaranteed to evaluate its argument exactly once.
+ - Its arg may be any int or unsigned int; it need not be an unsigned char
+ or EOF.
- It's typically faster.
POSIX says that only '0' through '9' are digits. Prefer ISDIGIT to
isdigit unless it's important to use the locale's definition
of `digit' even when the host does not conform to POSIX. */
#define ISDIGIT(c) ((unsigned int) (c) - '0' <= 9)
-#if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
-# define __attribute__(x)
-#endif
-
-#ifndef ATTRIBUTE_UNUSED
-# define ATTRIBUTE_UNUSED __attribute__ ((__unused__))
-#endif
-
/* Shift A right by B bits portably, by dividing A by 2**B and
truncating towards minus infinity. A and B should be free of side
effects, and B should be in the range 0 <= B <= INT_BITS - 2, where
#define HOUR(x) ((x) * 60)
+/* long_time_t is a signed integer type that contains all time_t values. */
+verify (TYPE_IS_INTEGER (time_t));
+#if TIME_T_FITS_IN_LONG_INT
+typedef long int long_time_t;
+#else
+typedef time_t long_time_t;
+#endif
+
+/* Lots of this code assumes time_t and time_t-like values fit into
+ long_time_t. */
+verify (TYPE_MINIMUM (long_time_t) <= TYPE_MINIMUM (time_t)
+ && TYPE_MAXIMUM (time_t) <= TYPE_MAXIMUM (long_time_t));
+
+/* FIXME: It also assumes that signed integer overflow silently wraps around,
+ but this is not true any more with recent versions of GCC 4. */
+
/* An integer value, and the number of digits in its textual
representation. */
typedef struct
enum { BILLION = 1000000000, LOG10_BILLION = 9 };
+/* Relative times. */
+typedef struct
+{
+ /* Relative year, month, day, hour, minutes, seconds, and nanoseconds. */
+ long int year;
+ long int month;
+ long int day;
+ long int hour;
+ long int minutes;
+ long_time_t seconds;
+ long int ns;
+} relative_time;
+
+#if HAVE_COMPOUND_LITERALS
+# define RELATIVE_TIME_0 ((relative_time) { 0, 0, 0, 0, 0, 0, 0 })
+#else
+static relative_time const RELATIVE_TIME_0;
+#endif
+
/* Information passed to and from the parser. */
typedef struct
{
struct timespec seconds; /* includes nanoseconds */
/* Relative year, month, day, hour, minutes, seconds, and nanoseconds. */
- long int rel_year;
- long int rel_month;
- long int rel_day;
- long int rel_hour;
- long int rel_minutes;
- long int rel_seconds;
- long int rel_ns;
-
- /* Counts of nonterminals of various flavors parsed so far. */
+ relative_time rel;
+
+ /* Presence or counts of nonterminals of various flavors parsed so far. */
bool timespec_seen;
+ bool rels_seen;
size_t dates_seen;
size_t days_seen;
size_t local_zones_seen;
- size_t rels_seen;
+ size_t dsts_seen;
size_t times_seen;
size_t zones_seen;
union YYSTYPE;
static int yylex (union YYSTYPE *, parser_control *);
-static int yyerror (parser_control *, char *);
-static long int time_zone_hhmm (textint, long int);
+static int yyerror (parser_control const *, char const *);
+static long int time_zone_hhmm (parser_control *, textint, long int);
+
+/* Extract into *PC any date and time info from a string of digits
+ of the form e.g., YYYYMMDD, YYMMDD, HHMM, HH (and sometimes YYY,
+ YYYY, ...). */
+static void
+digits_to_date_time (parser_control *pc, textint text_int)
+{
+ if (pc->dates_seen && ! pc->year.digits
+ && ! pc->rels_seen && (pc->times_seen || 2 < text_int.digits))
+ pc->year = text_int;
+ else
+ {
+ if (4 < text_int.digits)
+ {
+ pc->dates_seen++;
+ pc->day = text_int.value % 100;
+ pc->month = (text_int.value / 100) % 100;
+ pc->year.value = text_int.value / 10000;
+ pc->year.digits = text_int.digits - 4;
+ }
+ else
+ {
+ pc->times_seen++;
+ if (text_int.digits <= 2)
+ {
+ pc->hour = text_int.value;
+ pc->minutes = 0;
+ }
+ else
+ {
+ pc->hour = text_int.value / 100;
+ pc->minutes = text_int.value % 100;
+ }
+ pc->seconds.tv_sec = 0;
+ pc->seconds.tv_nsec = 0;
+ pc->meridian = MER24;
+ }
+ }
+}
+
+/* Increment PC->rel by FACTOR * REL (FACTOR is 1 or -1). */
+static void
+apply_relative_time (parser_control *pc, relative_time rel, int factor)
+{
+ pc->rel.ns += factor * rel.ns;
+ pc->rel.seconds += factor * rel.seconds;
+ pc->rel.minutes += factor * rel.minutes;
+ pc->rel.hour += factor * rel.hour;
+ pc->rel.day += factor * rel.day;
+ pc->rel.month += factor * rel.month;
+ pc->rel.year += factor * rel.year;
+ pc->rels_seen = true;
+}
+
+/* Set PC-> hour, minutes, seconds and nanoseconds members from arguments. */
+static void
+set_hhmmss (parser_control *pc, long int hour, long int minutes,
+ time_t sec, long int nsec)
+{
+ pc->hour = hour;
+ pc->minutes = minutes;
+ pc->seconds.tv_sec = sec;
+ pc->seconds.tv_nsec = nsec;
+}
%}
%parse-param { parser_control *pc }
%lex-param { parser_control *pc }
-/* This grammar has 14 shift/reduce conflicts. */
-%expect 14
+/* This grammar has 20 shift/reduce conflicts. */
+%expect 20
%union
{
long int intval;
textint textintval;
struct timespec timespec;
+ relative_time rel;
}
%token tAGO tDST
-%token <intval> tDAY tDAY_UNIT tDAYZONE tHOUR_UNIT tLOCAL_ZONE tMERIDIAN
-%token <intval> tMINUTE_UNIT tMONTH tMONTH_UNIT tORDINAL
-%token <intval> tSEC_UNIT tYEAR_UNIT tZONE
+%token tYEAR_UNIT tMONTH_UNIT tHOUR_UNIT tMINUTE_UNIT tSEC_UNIT
+%token <intval> tDAY_UNIT tDAY_SHIFT
+
+%token <intval> tDAY tDAYZONE tLOCAL_ZONE tMERIDIAN
+%token <intval> tMONTH tORDINAL tZONE
%token <textintval> tSNUMBER tUNUMBER
%token <timespec> tSDECIMAL_NUMBER tUDECIMAL_NUMBER
%type <intval> o_colon_minutes o_merid
%type <timespec> seconds signed_seconds unsigned_seconds
+%type <rel> relunit relunit_snumber dayshift
+
%%
spec:
| day
{ pc->days_seen++; }
| rel
- { pc->rels_seen++; }
| number
+ | hybrid
;
time:
tUNUMBER tMERIDIAN
{
- pc->hour = $1.value;
- pc->minutes = 0;
- pc->seconds.tv_sec = 0;
- pc->seconds.tv_nsec = 0;
+ set_hhmmss (pc, $1.value, 0, 0, 0);
pc->meridian = $2;
}
| tUNUMBER ':' tUNUMBER o_merid
{
- pc->hour = $1.value;
- pc->minutes = $3.value;
- pc->seconds.tv_sec = 0;
- pc->seconds.tv_nsec = 0;
+ set_hhmmss (pc, $1.value, $3.value, 0, 0);
pc->meridian = $4;
}
| tUNUMBER ':' tUNUMBER tSNUMBER o_colon_minutes
{
- pc->hour = $1.value;
- pc->minutes = $3.value;
- pc->seconds.tv_sec = 0;
- pc->seconds.tv_nsec = 0;
+ set_hhmmss (pc, $1.value, $3.value, 0, 0);
pc->meridian = MER24;
pc->zones_seen++;
- pc->time_zone = time_zone_hhmm ($4, $5);
+ pc->time_zone = time_zone_hhmm (pc, $4, $5);
}
| tUNUMBER ':' tUNUMBER ':' unsigned_seconds o_merid
{
- pc->hour = $1.value;
- pc->minutes = $3.value;
- pc->seconds = $5;
+ set_hhmmss (pc, $1.value, $3.value, $5.tv_sec, $5.tv_nsec);
pc->meridian = $6;
}
| tUNUMBER ':' tUNUMBER ':' unsigned_seconds tSNUMBER o_colon_minutes
{
- pc->hour = $1.value;
- pc->minutes = $3.value;
- pc->seconds = $5;
+ set_hhmmss (pc, $1.value, $3.value, $5.tv_sec, $5.tv_nsec);
pc->meridian = MER24;
pc->zones_seen++;
- pc->time_zone = time_zone_hhmm ($6, $7);
+ pc->time_zone = time_zone_hhmm (pc, $6, $7);
}
;
local_zone:
tLOCAL_ZONE
- { pc->local_isdst = $1; }
+ {
+ pc->local_isdst = $1;
+ pc->dsts_seen += (0 < $1);
+ }
| tLOCAL_ZONE tDST
- { pc->local_isdst = $1 < 0 ? 1 : $1 + 1; }
+ {
+ pc->local_isdst = 1;
+ pc->dsts_seen += (0 < $1) + 1;
+ }
;
zone:
tZONE
{ pc->time_zone = $1; }
+ | tZONE relunit_snumber
+ { pc->time_zone = $1;
+ apply_relative_time (pc, $2, 1); }
| tZONE tSNUMBER o_colon_minutes
- { pc->time_zone = $1 + time_zone_hhmm ($2, $3); }
+ { pc->time_zone = $1 + time_zone_hhmm (pc, $2, $3); }
| tDAYZONE
{ pc->time_zone = $1 + 60; }
| tZONE tDST
day:
tDAY
{
- pc->day_ordinal = 1;
+ pc->day_ordinal = 0;
pc->day_number = $1;
}
| tDAY ','
{
- pc->day_ordinal = 1;
+ pc->day_ordinal = 0;
pc->day_number = $1;
}
| tORDINAL tDAY
rel:
relunit tAGO
- {
- pc->rel_ns = -pc->rel_ns;
- pc->rel_seconds = -pc->rel_seconds;
- pc->rel_minutes = -pc->rel_minutes;
- pc->rel_hour = -pc->rel_hour;
- pc->rel_day = -pc->rel_day;
- pc->rel_month = -pc->rel_month;
- pc->rel_year = -pc->rel_year;
- }
+ { apply_relative_time (pc, $1, -1); }
| relunit
+ { apply_relative_time (pc, $1, 1); }
+ | dayshift
+ { apply_relative_time (pc, $1, 1); }
;
relunit:
tORDINAL tYEAR_UNIT
- { pc->rel_year += $1 * $2; }
+ { $$ = RELATIVE_TIME_0; $$.year = $1; }
| tUNUMBER tYEAR_UNIT
- { pc->rel_year += $1.value * $2; }
- | tSNUMBER tYEAR_UNIT
- { pc->rel_year += $1.value * $2; }
+ { $$ = RELATIVE_TIME_0; $$.year = $1.value; }
| tYEAR_UNIT
- { pc->rel_year += $1; }
+ { $$ = RELATIVE_TIME_0; $$.year = 1; }
| tORDINAL tMONTH_UNIT
- { pc->rel_month += $1 * $2; }
+ { $$ = RELATIVE_TIME_0; $$.month = $1; }
| tUNUMBER tMONTH_UNIT
- { pc->rel_month += $1.value * $2; }
- | tSNUMBER tMONTH_UNIT
- { pc->rel_month += $1.value * $2; }
+ { $$ = RELATIVE_TIME_0; $$.month = $1.value; }
| tMONTH_UNIT
- { pc->rel_month += $1; }
+ { $$ = RELATIVE_TIME_0; $$.month = 1; }
| tORDINAL tDAY_UNIT
- { pc->rel_day += $1 * $2; }
+ { $$ = RELATIVE_TIME_0; $$.day = $1 * $2; }
| tUNUMBER tDAY_UNIT
- { pc->rel_day += $1.value * $2; }
- | tSNUMBER tDAY_UNIT
- { pc->rel_day += $1.value * $2; }
+ { $$ = RELATIVE_TIME_0; $$.day = $1.value * $2; }
| tDAY_UNIT
- { pc->rel_day += $1; }
+ { $$ = RELATIVE_TIME_0; $$.day = $1; }
| tORDINAL tHOUR_UNIT
- { pc->rel_hour += $1 * $2; }
+ { $$ = RELATIVE_TIME_0; $$.hour = $1; }
| tUNUMBER tHOUR_UNIT
- { pc->rel_hour += $1.value * $2; }
- | tSNUMBER tHOUR_UNIT
- { pc->rel_hour += $1.value * $2; }
+ { $$ = RELATIVE_TIME_0; $$.hour = $1.value; }
| tHOUR_UNIT
- { pc->rel_hour += $1; }
+ { $$ = RELATIVE_TIME_0; $$.hour = 1; }
| tORDINAL tMINUTE_UNIT
- { pc->rel_minutes += $1 * $2; }
+ { $$ = RELATIVE_TIME_0; $$.minutes = $1; }
| tUNUMBER tMINUTE_UNIT
- { pc->rel_minutes += $1.value * $2; }
- | tSNUMBER tMINUTE_UNIT
- { pc->rel_minutes += $1.value * $2; }
+ { $$ = RELATIVE_TIME_0; $$.minutes = $1.value; }
| tMINUTE_UNIT
- { pc->rel_minutes += $1; }
+ { $$ = RELATIVE_TIME_0; $$.minutes = 1; }
| tORDINAL tSEC_UNIT
- { pc->rel_seconds += $1 * $2; }
+ { $$ = RELATIVE_TIME_0; $$.seconds = $1; }
| tUNUMBER tSEC_UNIT
- { pc->rel_seconds += $1.value * $2; }
- | tSNUMBER tSEC_UNIT
- { pc->rel_seconds += $1.value * $2; }
+ { $$ = RELATIVE_TIME_0; $$.seconds = $1.value; }
| tSDECIMAL_NUMBER tSEC_UNIT
- { pc->rel_seconds += $1.tv_sec * $2; pc->rel_ns += $1.tv_nsec * $2; }
+ { $$ = RELATIVE_TIME_0; $$.seconds = $1.tv_sec; $$.ns = $1.tv_nsec; }
| tUDECIMAL_NUMBER tSEC_UNIT
- { pc->rel_seconds += $1.tv_sec * $2; pc->rel_ns += $1.tv_nsec * $2; }
+ { $$ = RELATIVE_TIME_0; $$.seconds = $1.tv_sec; $$.ns = $1.tv_nsec; }
| tSEC_UNIT
- { pc->rel_seconds += $1; }
+ { $$ = RELATIVE_TIME_0; $$.seconds = 1; }
+ | relunit_snumber
+ ;
+
+relunit_snumber:
+ tSNUMBER tYEAR_UNIT
+ { $$ = RELATIVE_TIME_0; $$.year = $1.value; }
+ | tSNUMBER tMONTH_UNIT
+ { $$ = RELATIVE_TIME_0; $$.month = $1.value; }
+ | tSNUMBER tDAY_UNIT
+ { $$ = RELATIVE_TIME_0; $$.day = $1.value * $2; }
+ | tSNUMBER tHOUR_UNIT
+ { $$ = RELATIVE_TIME_0; $$.hour = $1.value; }
+ | tSNUMBER tMINUTE_UNIT
+ { $$ = RELATIVE_TIME_0; $$.minutes = $1.value; }
+ | tSNUMBER tSEC_UNIT
+ { $$ = RELATIVE_TIME_0; $$.seconds = $1.value; }
+ ;
+
+dayshift:
+ tDAY_SHIFT
+ { $$ = RELATIVE_TIME_0; $$.day = $1; }
;
seconds: signed_seconds | unsigned_seconds;
number:
tUNUMBER
+ { digits_to_date_time (pc, $1); }
+ ;
+
+hybrid:
+ tUNUMBER relunit_snumber
{
- if (pc->dates_seen
- && ! pc->rels_seen && (pc->times_seen || 2 < $1.digits))
- pc->year = $1;
- else
- {
- if (4 < $1.digits)
- {
- pc->dates_seen++;
- pc->day = $1.value % 100;
- pc->month = ($1.value / 100) % 100;
- pc->year.value = $1.value / 10000;
- pc->year.digits = $1.digits - 4;
- }
- else
- {
- pc->times_seen++;
- if ($1.digits <= 2)
- {
- pc->hour = $1.value;
- pc->minutes = 0;
- }
- else
- {
- pc->hour = $1.value / 100;
- pc->minutes = $1.value % 100;
- }
- pc->seconds.tv_sec = 0;
- pc->seconds.tv_nsec = 0;
- pc->meridian = MER24;
- }
- }
+ /* Hybrid all-digit and relative offset, so that we accept e.g.,
+ "YYYYMMDD +N days" as well as "YYYYMMDD N days". */
+ digits_to_date_time (pc, $1);
+ apply_relative_time (pc, $2, 1);
}
;
/* Assorted relative-time words. */
static table const relative_time_table[] =
{
- { "TOMORROW", tDAY_UNIT, 1 },
- { "YESTERDAY",tDAY_UNIT, -1 },
- { "TODAY", tDAY_UNIT, 0 },
- { "NOW", tDAY_UNIT, 0 },
+ { "TOMORROW", tDAY_SHIFT, 1 },
+ { "YESTERDAY",tDAY_SHIFT, -1 },
+ { "TODAY", tDAY_SHIFT, 0 },
+ { "NOW", tDAY_SHIFT, 0 },
{ "LAST", tORDINAL, -1 },
{ "THIS", tORDINAL, 0 },
{ "NEXT", tORDINAL, 1 },
{ NULL, 0, 0 }
};
+/* The universal time zone table. These labels can be used even for
+ time stamps that would not otherwise be valid, e.g., GMT time
+ stamps in London during summer. */
+static table const universal_time_zone_table[] =
+{
+ { "GMT", tZONE, HOUR ( 0) }, /* Greenwich Mean */
+ { "UT", tZONE, HOUR ( 0) }, /* Universal (Coordinated) */
+ { "UTC", tZONE, HOUR ( 0) },
+ { NULL, 0, 0 }
+};
+
/* The time zone table. This table is necessarily incomplete, as time
zone abbreviations are ambiguous; e.g. Australians interpret "EST"
as Eastern time in Australia, not as US Eastern Standard Time.
abbreviations; use numeric abbreviations like `-0500' instead. */
static table const time_zone_table[] =
{
- { "GMT", tZONE, HOUR ( 0) }, /* Greenwich Mean */
- { "UT", tZONE, HOUR ( 0) }, /* Universal (Coordinated) */
- { "UTC", tZONE, HOUR ( 0) },
{ "WET", tZONE, HOUR ( 0) }, /* Western European */
{ "WEST", tDAYZONE, HOUR ( 0) }, /* Western European Summer */
{ "BST", tDAYZONE, HOUR ( 0) }, /* British Summer */
{ "GST", tZONE, HOUR (10) }, /* Guam Standard */
{ "NZST", tZONE, HOUR (12) }, /* New Zealand Standard */
{ "NZDT", tDAYZONE, HOUR (12) }, /* New Zealand Daylight */
- { NULL, 0, 0 }
+ { NULL, 0, 0 }
};
/* Military time zone table. */
/* Convert a time zone expressed as HH:MM into an integer count of
minutes. If MM is negative, then S is of the form HHMM and needs
- to be picked apart; otherwise, S is of the form HH. */
+ to be picked apart; otherwise, S is of the form HH. As specified in
+ http://www.opengroup.org/susv3xbd/xbd_chap08.html#tag_08_03, allow
+ only valid TZ range, and consider first two digits as hours, if no
+ minutes specified. */
static long int
-time_zone_hhmm (textint s, long int mm)
+time_zone_hhmm (parser_control *pc, textint s, long int mm)
{
+ long int n_minutes;
+
+ /* If the length of S is 1 or 2 and no minutes are specified,
+ interpret it as a number of hours. */
+ if (s.digits <= 2 && mm < 0)
+ s.value *= 100;
+
if (mm < 0)
- return (s.value / 100) * 60 + s.value % 100;
+ n_minutes = (s.value / 100) * 60 + s.value % 100;
else
- return s.value * 60 + (s.negative ? -mm : mm);
+ n_minutes = s.value * 60 + (s.negative ? -mm : mm);
+
+ /* If the absolute number of minutes is larger than 24 hours,
+ arrange to reject it by incrementing pc->zones_seen. Thus,
+ we allow only values in the range UTC-24:00 to UTC+24:00. */
+ if (24 * 60 < abs (n_minutes))
+ pc->zones_seen++;
+
+ return n_minutes;
}
static int
{
table const *tp;
- /* Try local zone abbreviations first; they're more likely to be right. */
+ for (tp = universal_time_zone_table; tp->name; tp++)
+ if (strcmp (name, tp->name) == 0)
+ return tp;
+
+ /* Try local zone abbreviations before those in time_zone_table, as
+ the local ones are more likely to be right. */
for (tp = pc->local_time_zone_table; tp->name; tp++)
if (strcmp (name, tp->name) == 0)
return tp;
for (p = word; *p; p++)
{
unsigned char ch = *p;
- if (ISLOWER (ch))
- *p = toupper (ch);
+ *p = c_toupper (ch);
}
for (tp = meridian_table; tp->name; tp++)
for (;;)
{
- while (c = *pc->input, ISSPACE (c))
+ while (c = *pc->input, c_isspace (c))
pc->input++;
if (ISDIGIT (c) || c == '-' || c == '+')
if (c == '-' || c == '+')
{
sign = c == '-' ? -1 : 1;
- while (c = *++pc->input, ISSPACE (c))
+ while (c = *++pc->input, c_isspace (c))
continue;
if (! ISDIGIT (c))
/* skip the '-' sign */
}
}
- if (ISALPHA (c))
+ if (c_isalpha (c))
{
char buff[20];
char *p = buff;
*p++ = c;
c = *++pc->input;
}
- while (ISALPHA (c) || c == '.');
+ while (c_isalpha (c) || c == '.');
*p = '\0';
tp = lookup_word (pc, buff);
/* Do nothing if the parser reports an error. */
static int
-yyerror (parser_control *pc ATTRIBUTE_UNUSED, char *s ATTRIBUTE_UNUSED)
+yyerror (parser_control const *pc _UNUSED_PARAMETER_,
+ char const *s _UNUSED_PARAMETER_)
{
return 0;
}
if (! now)
{
- if (gettime (&gettime_buffer) != 0)
- return false;
+ gettime (&gettime_buffer);
now = &gettime_buffer;
}
if (! tmp)
return false;
- while (c = *p, ISSPACE (c))
+ while (c = *p, c_isspace (c))
p++;
if (strncmp (p, "TZ=\"", 4) == 0)
}
}
+ /* As documented, be careful to treat the empty string just like
+ a date string of "0". Without this, an empty string would be
+ declared invalid when parsed during a DST transition. */
+ if (*p == '\0')
+ p = "0";
+
pc.input = p;
pc.year.value = tmp->tm_year;
pc.year.value += TM_YEAR_BASE;
- pc.year.digits = 4;
+ pc.year.digits = 0;
pc.month = tmp->tm_mon + 1;
pc.day = tmp->tm_mday;
pc.hour = tmp->tm_hour;
tm.tm_isdst = tmp->tm_isdst;
pc.meridian = MER24;
- pc.rel_ns = 0;
- pc.rel_seconds = 0;
- pc.rel_minutes = 0;
- pc.rel_hour = 0;
- pc.rel_day = 0;
- pc.rel_month = 0;
- pc.rel_year = 0;
+ pc.rel = RELATIVE_TIME_0;
pc.timespec_seen = false;
+ pc.rels_seen = false;
pc.dates_seen = 0;
pc.days_seen = 0;
- pc.rels_seen = 0;
pc.times_seen = 0;
pc.local_zones_seen = 0;
+ pc.dsts_seen = 0;
pc.zones_seen = 0;
#if HAVE_STRUCT_TM_TM_ZONE
#else
#if HAVE_TZNAME
{
-# ifndef tzname
+# if !HAVE_DECL_TZNAME
extern char *tzname[];
# endif
int i;
*result = pc.seconds;
else
{
- if (1 < pc.times_seen || 1 < pc.dates_seen || 1 < pc.days_seen
- || 1 < (pc.local_zones_seen + pc.zones_seen)
- || (pc.local_zones_seen && 1 < pc.local_isdst))
+ if (1 < (pc.times_seen | pc.dates_seen | pc.days_seen | pc.dsts_seen
+ | (pc.local_zones_seen + pc.zones_seen)))
goto fail;
tm.tm_year = to_year (pc.year) - TM_YEAR_BASE;
if (pc.days_seen && ! pc.dates_seen)
{
tm.tm_mday += ((pc.day_number - tm.tm_wday + 7) % 7
- + 7 * (pc.day_ordinal - (0 < pc.day_ordinal)));
+ + 7 * (pc.day_ordinal
+ - (0 < pc.day_ordinal
+ && tm.tm_wday != pc.day_number)));
tm.tm_isdst = -1;
Start = mktime (&tm);
if (Start == (time_t) -1)
goto fail;
}
+ /* Add relative date. */
+ if (pc.rel.year | pc.rel.month | pc.rel.day)
+ {
+ int year = tm.tm_year + pc.rel.year;
+ int month = tm.tm_mon + pc.rel.month;
+ int day = tm.tm_mday + pc.rel.day;
+ if (((year < tm.tm_year) ^ (pc.rel.year < 0))
+ | ((month < tm.tm_mon) ^ (pc.rel.month < 0))
+ | ((day < tm.tm_mday) ^ (pc.rel.day < 0)))
+ goto fail;
+ tm.tm_year = year;
+ tm.tm_mon = month;
+ tm.tm_mday = day;
+ tm.tm_hour = tm0.tm_hour;
+ tm.tm_min = tm0.tm_min;
+ tm.tm_sec = tm0.tm_sec;
+ tm.tm_isdst = tm0.tm_isdst;
+ Start = mktime (&tm);
+ if (Start == (time_t) -1)
+ goto fail;
+ }
+
+ /* The only "output" of this if-block is an updated Start value,
+ so this block must follow others that clobber Start. */
if (pc.zones_seen)
{
long int delta = pc.time_zone * 60;
Start = t1;
}
- /* Add relative date. */
- if (pc.rel_year | pc.rel_month | pc.rel_day)
- {
- int year = tm.tm_year + pc.rel_year;
- int month = tm.tm_mon + pc.rel_month;
- int day = tm.tm_mday + pc.rel_day;
- if (((year < tm.tm_year) ^ (pc.rel_year < 0))
- | ((month < tm.tm_mon) ^ (pc.rel_month < 0))
- | ((day < tm.tm_mday) ^ (pc.rel_day < 0)))
- goto fail;
- tm.tm_year = year;
- tm.tm_mon = month;
- tm.tm_mday = day;
- Start = mktime (&tm);
- if (Start == (time_t) -1)
- goto fail;
- }
-
/* Add relative hours, minutes, and seconds. On hosts that support
leap seconds, ignore the possibility of leap seconds; e.g.,
"+ 10 minutes" adds 600 seconds, even if one of them is a
must be applied before relative times, and if mktime is applied
again the time zone will be lost. */
{
- long int sum_ns = pc.seconds.tv_nsec + pc.rel_ns;
+ long int sum_ns = pc.seconds.tv_nsec + pc.rel.ns;
long int normalized_ns = (sum_ns % BILLION + BILLION) % BILLION;
time_t t0 = Start;
- long int d1 = 60 * 60 * pc.rel_hour;
+ long int d1 = 60 * 60 * pc.rel.hour;
time_t t1 = t0 + d1;
- long int d2 = 60 * pc.rel_minutes;
+ long int d2 = 60 * pc.rel.minutes;
time_t t2 = t1 + d2;
- long int d3 = pc.rel_seconds;
- time_t t3 = t2 + d3;
+ long_time_t d3 = pc.rel.seconds;
+ long_time_t t3 = t2 + d3;
long int d4 = (sum_ns - normalized_ns) / BILLION;
- time_t t4 = t3 + d4;
+ long_time_t t4 = t3 + d4;
+ time_t t5 = t4;
- if ((d1 / (60 * 60) ^ pc.rel_hour)
- | (d2 / 60 ^ pc.rel_minutes)
+ if ((d1 / (60 * 60) ^ pc.rel.hour)
+ | (d2 / 60 ^ pc.rel.minutes)
| ((t1 < t0) ^ (d1 < 0))
| ((t2 < t1) ^ (d2 < 0))
| ((t3 < t2) ^ (d3 < 0))
- | ((t4 < t3) ^ (d4 < 0)))
+ | ((t4 < t3) ^ (d4 < 0))
+ | (t5 != t4))
goto fail;
- result->tv_sec = t4;
+ result->tv_sec = t5;
result->tv_nsec = normalized_ns;
}
}