# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# This program is meant for authors or maintainers which want to import
progname=$0
package=gnulib
-cvsdatestamp='$Date: 2006-01-10 13:37:12 $'
+cvsdatestamp='$Date: 2006-01-26 12:51:48 $'
last_checkin_date=`echo "$cvsdatestamp" | sed -e 's,^\$[D]ate: ,,'`
version=`echo "$last_checkin_date" | sed -e 's/ .*$//' -e 's,/,-,g'`
# ;;
#esac
-AUTORECONF="${AUTOCONFPATH}autoreconf"
+# You can set AUTOMAKEPATH to empty if automake 1.9.x is already in your PATH.
+AUTOMAKEPATH=
+
+# If you didn't set AUTOCONFPATH and AUTOMAKEPATH, you can also set the
+# variables AUTOCONF, ACLOCAL, AUTOMAKE, AUTORECONF individually.
+if test -z "${AUTOCONF}" || test -n "${AUTOCONFPATH}"; then
+ AUTOCONF="${AUTOCONFPATH}autoconf"
+fi
+if test -z "${ACLOCAL}" || test -n "${AUTOMAKEPATH}"; then
+ ACLOCAL="${AUTOMAKEPATH}aclocal"
+fi
+if test -z "${AUTOMAKE}" || test -n "${AUTOMAKEPATH}"; then
+ AUTOMAKE="${AUTOMAKEPATH}automake"
+fi
+if test -z "${AUTORECONF}" || test -n "${AUTOCONFPATH}"; then
+ AUTORECONF="${AUTOCONFPATH}autoreconf"
+fi
# func_usage
# outputs to stdout the --help usage message.
{
# Use the mktemp program if available. If not available, hide the error
# message.
- tmp=`(umask 077 && mktemp -d -q "$TMPDIR/glXXXXXX") 2>/dev/null` &&
+ tmp=`(umask 077 && mktemp -d "$TMPDIR/glXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
done
}
+# func_modules_add_dummy
+# Input:
+# - modules list of modules, including dependencies
+# Output:
+# - modules list of modules, including 'dummy' if needed
+func_modules_add_dummy ()
+{
+ have_lib_SOURCES=
+ sed_remove_backslash_newline=':a
+/\\$/{
+s/\\$//
+N
+s/\n//
+ba
+}'
+ for module in $modules; do
+ func_verify_nontests_module
+ if test -n "$module"; then
+ # Extract the value of "lib_SOURCES += ...".
+ for file in `func_get_automake_snippet "$module" | sed -e "$sed_remove_backslash_newline" | sed -n -e 's,^lib_SOURCES[ ]*+=\([^#]*\).*$,\1,p'`; do
+ # Ignore .h files since they are not compiled.
+ case "$file" in
+ *.h) ;;
+ *) have_lib_SOURCES=yes ;;
+ esac
+ done
+ fi
+ done
+ # Add the dummy module, to make sure the library will be non-empty.
+ if test -z "$have_lib_SOURCES"; then
+ modules="$modules dummy"
+ fi
+}
+
# func_modules_to_filelist
# Input:
# - modules list of modules, including dependencies
echo
echo "${libname}_${libext}_SOURCES ="
echo "${libname}_${libext}_LIBADD = @${perhapsLT}LIBOBJS@"
+ echo "noinst_HEADERS ="
echo "EXTRA_DIST ="
echo "BUILT_SOURCES ="
echo "SUFFIXES ="
echo "TESTS ="
echo "TESTS_ENVIRONMENT ="
echo "noinst_PROGRAMS ="
+ echo "check_PROGRAMS ="
+ echo "noinst_HEADERS ="
echo "EXTRA_DIST ="
echo "BUILT_SOURCES ="
echo "SUFFIXES ="
echo "Module list with included dependencies:"
echo "$modules" | sed -e 's/^/ /'
+ # Add the dummy module if needed.
+ func_modules_add_dummy
+
# If --lgpl, check the license of modules are compatible.
if test -n "$lgpl"; then
for module in $modules; do
echo "$g""$delimiter""$f"
done | LC_ALL=C sort > "$tmp"/new-files
# First the files that are in old-files, but not in new-files:
- for g in `LC_ALL=C join -t"$delimiter" -v1 "$tmp"/old-files "$tmp"/new-files | sed -e 's,'"$delimiter"'.*,,'`; do
+ sed_take_first_column='s,'"$delimiter"'.*,,'
+ for g in `LC_ALL=C join -t"$delimiter" -v1 "$tmp"/old-files "$tmp"/new-files | sed -e "$sed_take_first_column"`; do
# Remove the file. Do nothing if the user already removed it.
if test -f "$destdir/$g"; then
if $doit; then
rm -f "$destdir/$g.tmp"
}
# Then the files that are in new-files, but not in old-files:
+ sed_take_last_column='s,^.*'"$delimiter"',,'
already_present=
- for f in `LC_ALL=C join -t"$delimiter" -v2 "$tmp"/old-files "$tmp"/new-files | sed -e 's,'^.*"$delimiter"',,'`; do
+ for f in `LC_ALL=C join -t"$delimiter" -v2 "$tmp"/old-files "$tmp"/new-files | sed -e "$sed_take_last_column"`; do
case "$f" in
build-aux/*) g=`echo "$f" | sed -e "s,^build-aux/,$auxdir/,"` ;;
lib/*) g=`echo "$f" | sed -e "s,^lib/,$sourcebase/,"` ;;
done
# Then the files that are in new-files and in old-files:
already_present=true
- for f in `LC_ALL=C join -t"$delimiter" "$tmp"/old-files "$tmp"/new-files | sed -e 's,'^.*"$delimiter"',,'`; do
+ for f in `LC_ALL=C join -t"$delimiter" "$tmp"/old-files "$tmp"/new-files | sed -e "$sed_take_last_column"`; do
case "$f" in
build-aux/*) g=`echo "$f" | sed -e "s,^build-aux/,$auxdir/,"` ;;
lib/*) g=`echo "$f" | sed -e "s,^lib/,$sourcebase/,"` ;;
func_add_or_update
done
rm -rf "$tmp"
- trap - 0 1 2 3 15
+ # Undo the effect of the previous 'trap' command. Some shellology:
+ # We cannot use "trap - 0 1 2 3 15", because Solaris sh would attempt to
+ # execute the command "-". "trap '' ..." is fine only for signal 0 (= normal
+ # exit); for the others we need to call 'exit' explicitly. The value of $? is
+ # 128 + signal number and is set before the trap-registered command is run.
+ trap '' 0
+ trap 'exit $?' 1 2 3 15
# Command-line invocation printed in a comment in generated gnulib-cache.m4.
actioncmd="gnulib-tool --import"
if grep gl_USE_SYSTEM_EXTENSIONS "$destdir"/$m4base/*.m4 > /dev/null; then
echo " AC_REQUIRE([gl_USE_SYSTEM_EXTENSIONS])"
fi
+ if grep gl_LOCK "$destdir"/$m4base/*.m4 > /dev/null; then
+ echo " AC_REQUIRE([gl_LOCK])"
+ fi
echo "])"
echo
echo "# This macro should be invoked from $configure_ac, in the section"
else
echo " AM_CONDITIONAL([GL_COND_LIBTOOL], [true])"
fi
+ if test "$auxdir" != "build-aux"; then
+ sed_replace_build_aux='
+ :a
+ /AC_CONFIG_FILES(.*:build-aux\/.*)/{
+ s|AC_CONFIG_FILES(\(.*\):build-aux/\(.*\))|AC_CONFIG_FILES(\1:'"$auxdir"'/\2)|
+ ba
+ }'
+ sed_replace_build_aux=`echo "$sed_replace_build_aux" | sed -e 1d -e 's/^ *//'`
+ else
+ sed_replace_build_aux=
+ fi
for module in $modules; do
func_verify_module
if test -n "$module"; then
- func_get_autoconf_snippet "$module" | sed -e '/^$/d;' -e 's/^/ /' -e 's/AM_GNU_GETTEXT(\[external\])/dnl you must add AM_GNU_GETTEXT([external]) or similar to configure.ac./'
+ func_get_autoconf_snippet "$module" \
+ | sed -e '/^$/d;' -e 's/^/ /' \
+ -e 's/AM_GNU_GETTEXT(\[external\])/dnl you must add AM_GNU_GETTEXT([external]) or similar to configure.ac./' \
+ -e "$sed_replace_build_aux"
if test "$module" = 'alloca' && test -n "$libtool"; then
echo 'changequote(,)dnl'
echo 'LTALLOCA=`echo "$ALLOCA" | sed '"'"'s/\.[^.]* /.lo /g;s/\.[^.]*$/.lo/'"'"'`'
echo "Module list with included dependencies:"
echo "$modules" | sed -e 's/^/ /'
+ # Add the dummy module if needed.
+ func_modules_add_dummy
+
# Determine final file list.
func_modules_to_filelist
echo "File list:"
echo "gl_USE_SYSTEM_EXTENSIONS"
echo
fi
+ if grep gl_LOCK "$testdir"/m4/*.m4 > /dev/null; then
+ echo "gl_LOCK"
+ echo
+ fi
if test -z "$libtool"; then
echo "AM_CONDITIONAL([GL_COND_LIBTOOL], [false])"
else
echo "AM_CONDITIONAL([GL_COND_LIBTOOL], [true])"
fi
+ if test "$auxdir" != "build-aux"; then
+ sed_replace_build_aux='
+ :a
+ /AC_CONFIG_FILES(.*:build-aux\/.*)/{
+ s|AC_CONFIG_FILES(\(.*\):build-aux/\(.*\))|AC_CONFIG_FILES(\1:../'"$auxdir"'/\2)|
+ ba
+ }'
+ sed_replace_build_aux=`echo "$sed_replace_build_aux" | sed -e 1d -e 's/^ *//'`
+ else
+ sed_replace_build_aux=
+ fi
# We don't have explicit ordering constraints between the various
# autoconf snippets. It's cleanest to put those of the library before
# those of the tests.
for module in $modules; do
func_verify_nontests_module
if test -n "$module"; then
- func_get_autoconf_snippet "$module"
+ func_get_autoconf_snippet "$module" \
+ | sed -e "$sed_replace_build_aux"
fi
done
for module in $modules; do
func_verify_tests_module
if test -n "$module"; then
- func_get_autoconf_snippet "$module"
+ func_get_autoconf_snippet "$module" \
+ | sed -e "$sed_replace_build_aux"
fi
done
echo
echo "gl_USE_SYSTEM_EXTENSIONS"
echo
fi
+ if grep gl_LOCK "$testdir"/m4/*.m4 > /dev/null; then
+ echo "gl_LOCK"
+ echo
+ fi
if test -z "$libtool"; then
echo "AM_CONDITIONAL([GL_COND_LIBTOOL], [false])"
else
echo "AM_CONDITIONAL([GL_COND_LIBTOOL], [true])"
fi
+ if test "$auxdir" != "build-aux"; then
+ sed_replace_build_aux='
+ :a
+ /AC_CONFIG_FILES(.*:build-aux\/.*)/{
+ s|AC_CONFIG_FILES(\(.*\):build-aux/\(.*\))|AC_CONFIG_FILES(\1:'"$auxdir"'/\2)|
+ ba
+ }'
+ sed_replace_build_aux=`echo "$sed_replace_build_aux" | sed -e 1d -e 's/^ *//'`
+ else
+ sed_replace_build_aux=
+ fi
for module in $modules; do
func_verify_nontests_module
if test -n "$module"; then
- func_get_autoconf_snippet "$module"
+ func_get_autoconf_snippet "$module" \
+ | sed -e "$sed_replace_build_aux"
fi
done
echo
# Create autogenerated files.
(cd "$megatestdir"
- echo "executing ${AUTORECONF} --install"
- ${AUTORECONF} --install
+ # Do not use "${AUTORECONF} --install", because autoreconf operates
+ # recursively, but the subdirectories are already finished, therefore
+ # calling autoreconf here would only waste lots of CPU time.
+ echo "executing ${ACLOCAL}"
+ ${ACLOCAL}
+ echo "executing mkdir build-aux"
+ mkdir build-aux
+ echo "executing ${AUTOCONF}"
+ ${AUTOCONF}
+ echo "executing ${AUTOMAKE} --add-missing --copy"
+ ${AUTOMAKE} --add-missing --copy
)
}