encountered in the input.
@menu
+* ADD DOCUMENT:: Add documentary text to the active file.
* COMMENT:: Document your syntax file.
* DOCUMENT:: Document the active file.
* DISPLAY DOCUMENTS:: Display active file documents.
* HOST:: Temporarily return to the operating system.
* INCLUDE:: Include a file within the current one.
* PERMISSIONS:: Change permissions on a file.
-* QUIT:: Terminate the PSPP session.
* SET:: Adjust PSPP runtime parameters.
* SHOW:: Display runtime parameters.
* SUBTITLE:: Provide a document subtitle.
* TITLE:: Provide a document title.
@end menu
-@node COMMENT, DOCUMENT, Utilities, Utilities
+@node ADD DOCUMENT, COMMENT, Utilities, Utilities
+@comment node-name, next, previous, up
+@section ADD DOCUMENT
+@vindex ADD DOCUMENT
+
+@display
+ADD DOCUMENT
+ 'line one' 'line two' @dots{} 'last line' .
+@end display
+
+
+@cmd{ADD DOCUMENT} adds one or more lines of descriptive commentary to
+the active file. Documents added in this way are saved to system files.
+They can be viewed using @cmd{SYSFILE INFO} or @cmd{DISPLAY
+DOCUMENTS}. They can be removed from the active file with @cmd{DROP
+DOCUMENTS}.
+
+Each line of documentary text must be enclosed in quotation marks, and
+may not be more than 80 bytes long. @xref{DOCUMENT}.
+
+
+
+@node COMMENT, DOCUMENT, ADD DOCUMENT, Utilities
@section COMMENT
@vindex COMMENT
@vindex *
@cmd{COMMENT} can extend over any number of lines. Don't forget to
terminate it with a dot or a blank line.
+
+
@node DOCUMENT, DISPLAY DOCUMENTS, COMMENT, Utilities
@section DOCUMENT
@vindex DOCUMENT
@display
-DOCUMENT documentary_text.
+DOCUMENT @var{documentary_text}.
@end display
@cmd{DOCUMENT} adds one or more lines of descriptive commentary to the
DOCUMENTS}. They can be removed from the active file with @cmd{DROP
DOCUMENTS}.
-Specify the documentary text following the DOCUMENT keyword. You can
-extend the documentary text over as many lines as necessary. Lines are
-truncated at 80 characters width. Don't forget to terminate
-the command with a dot or a blank line.
+Specify the @var{documentary text} following the DOCUMENT keyword.
+It is interpreted literally --- any quotes or other punctuation marks
+will be included in the file.
+You can extend the documentary text over as many lines as necessary.
+Lines are truncated at 80 bytes. Don't forget to terminate
+the command with a dot or a blank line. @xref{ADD DOCUMENT}.
@node DISPLAY DOCUMENTS, DISPLAY FILE LABEL, DOCUMENT, Utilities
@section DISPLAY DOCUMENTS
active file,
if any. @xref{FILE LABEL}.
+This command is a PSPP extension.
+
@node DROP DOCUMENTS, ECHO, DISPLAY FILE LABEL, Utilities
@section DROP DOCUMENTS
@vindex DROP DOCUMENTS
@cmd{FINISH} terminates the current PSPP session and returns
control to the operating system.
-This command is not valid in interactive mode.
-
@node HOST, INCLUDE, FINISH, Utilities
@comment node-name, next, previous, up
@section HOST
@display
Two possible syntaxes:
- INCLUDE 'filename'.
- @@filename.
+ INCLUDE 'file-name'.
+ @@file-name.
@end display
@cmd{INCLUDE} causes the PSPP command processor to read an
Include files may be nested to any depth, up to the limit of available
memory.
-@node PERMISSIONS, QUIT, INCLUDE, Utilities
+@node PERMISSIONS, SET, INCLUDE, Utilities
@comment node-name, next, previous, up
@section PERMISSIONS
@vindex PERMISSIONS
@display
PERMISSIONS
- FILE='filename'
+ FILE='file-name'
/PERMISSIONS = @{READONLY,WRITEABLE@}.
@end display
This command cannot be used if the SAFER setting is active.
-@node QUIT, SET, PERMISSIONS, Utilities
-@section QUIT
-@vindex QUIT
-
-@display
-Two possible syntaxes:
- QUIT.
- EXIT.
-@end display
-
-@cmd{QUIT} terminates the current PSPP session and returns control
-to the operating system.
-
-This command is not valid within a command file.
-
-@node SET, SHOW, QUIT, Utilities
+@node SET, SHOW, PERMISSIONS, Utilities
@section SET
@vindex SET
/DECIMAL=@{DOT,COMMA@}
/FORMAT=fmt_spec
/EPOCH=@{AUTOMATIC,year@}
+ /RIB=@{NATIVE,MSBFIRST,LSBFIRST,VAX@}
+ /RRB=@{NATIVE,ISL,ISB,IDL,IDB,VF,VD,VG,ZS,ZL@}
(program input)
/ENDCMD='.'
/CC@{A,B,C,D,E@}=@{'npre,pre,suf,nsuf','npre.pre.suf.nsuf'@}
/DECIMAL=@{DOT,COMMA@}
/FORMAT=fmt_spec
+ /WIB=@{NATIVE,MSBFIRST,LSBFIRST,VAX@}
+ /WRB=@{NATIVE,ISL,ISB,IDL,IDB,VF,VD,VG,ZS,ZL@}
(output routing)
/ECHO=@{ON,OFF@}
(output driver options)
/HEADERS=@{NO,YES,BLANK@}
/LENGTH=@{NONE,length_in_lines@}
- /LISTING=@{ON,OFF,filename@}
+ /LISTING=@{ON,OFF,'file-name'@}
/MORE=@{ON,OFF@}
/WIDTH=@{NARROW,WIDTH,n_characters@}
(logging)
- /JOURNAL=@{ON,OFF@} [filename]
+ /JOURNAL=@{ON,OFF@} ['file-name']
(system files)
/COMPRESSION=@{ON,OFF@}
default. Any real value may be assigned.
@item DECIMAL
+@anchor{SET DECIMAL}
The default DOT setting causes the decimal point character to be
-@samp{.}. A setting of COMMA causes the decimal point character to be
-@samp{,}.
+@samp{.} and the grouping character to be @samp{,}. A setting of COMMA
+causes the decimal point character to be @samp{,} and the grouping
+character to be @samp{.}.
@item FORMAT
Allows the default numeric input/output format to be specified. The
-default is F8.2. @xref{Input/Output Formats}.
+default is F8.2. @xref{Input and Output Formats}.
@item EPOCH
@anchor{SET EPOCH}
Specifies the range of years used when a 2-digit year is read from a
data file or used in a date construction expression (@pxref{Date
-Construction}). If a 4-digit year is specified, then 2-digit years
-are interpreted starting from that year, known as the epoch. If
-AUTOMATIC (the default) is specified, then the epoch begins 69 years
-before the current date.
+Construction}). If a 4-digit year is specified for the epoch, then
+2-digit years are interpreted starting from that year, known as the
+epoch. If AUTOMATIC (the default) is specified, then the epoch begins
+69 years before the current date.
+
+@item RIB
+@anchor{SET RIB}
+
+PSPP extension to set the byte ordering (endianness) used for reading
+data in IB or PIB format (@pxref{Binary and Hexadecimal Numeric
+Formats}). In MSBFIRST ordering, the most-significant byte appears at
+the left end of a IB or PIB field. In LSBFIRST ordering, the
+least-significant byte appears at the left end. VAX ordering is like
+MSBFIRST, except that each pair of bytes is in reverse order. NATIVE,
+the default, is equivalent to MSBFIRST or LSBFIRST depending on the
+native format of the machine running PSPP.
+
+@item RRB
+@anchor{SET RRB}
+
+PSPP extension to set the floating-point format used for reading data in
+RB format (@pxref{Binary and Hexadecimal Numeric Formats}). The
+possibilities are:
+
+@table @asis
+@item NATIVE
+The native format of the machine running PSPP. Equivalent to either IDL
+or IDB.
+
+@item ISL
+32-bit IEEE 754 single-precision floating point, in little-endian byte
+order.
+
+@item ISB
+32-bit IEEE 754 single-precision floating point, in big-endian byte
+order.
+
+@item IDL
+64-bit IEEE 754 double-precision floating point, in little-endian byte
+order.
+
+@item IDB
+64-bit IEEE 754 double-precision floating point, in big-endian byte
+order.
+
+@item VF
+32-bit VAX F format, in VAX-endian byte order.
+
+@item VD
+64-bit VAX D format, in VAX-endian byte order.
+
+@item VG
+64-bit VAX G format, in VAX-endian byte order.
+
+@item ZS
+32-bit IBM Z architecture short format hexadecimal floating point, in
+big-endian byte order.
+
+@item ZL
+64-bit IBM Z architecture long format hexadecimal floating point, in
+big-endian byte order.
+
+Z architecture also supports IEEE 754 floating point. The ZS and ZL
+formats are only for use with very old input files.
+@end table
+The default is NATIVE.
@end table
Program input subcommands affect the way that programs are parsed when
@itemx CCC
@itemx CCD
@itemx CCE
-Set up custom currency formats. The argument is a string which must
-contain exactly three commas or exactly three periods. If commas, then
-the grouping character for the currency format is @samp{,}, and the
-decimal point character is @samp{.}; if periods, then the situation is
-reversed.
-
-The commas or periods divide the string into four fields, which are, in
-order, the negative prefix, prefix, suffix, and negative suffix. When a
-value is formatted using the custom currency format, the prefix precedes
-the value formatted and the suffix follows it. In addition, if the
-value is negative, the negative prefix precedes the prefix and the
-negative suffix follows the suffix.
+@anchor{CCx Settings}
+
+Set up custom currency formats. @xref{Custom Currency Formats}, for
+details.
@item DECIMAL
The default DOT setting causes the decimal point character to be
@item FORMAT
Allows the default numeric input/output format to be specified. The
-default is F8.2. @xref{Input/Output Formats}.
+default is F8.2. @xref{Input and Output Formats}.
+
+@item WIB
+@anchor{SET WIB}
+
+PSPP extension to set the byte ordering (endianness) used for writing
+data in IB or PIB format (@pxref{Binary and Hexadecimal Numeric
+Formats}). In MSBFIRST ordering, the most-significant byte appears at
+the left end of a IB or PIB field. In LSBFIRST ordering, the
+least-significant byte appears at the left end. VAX ordering is like
+MSBFIRST, except that each pair of bytes is in reverse order. NATIVE,
+the default, is equivalent to MSBFIRST or LSBFIRST depending on the
+native format of the machine running PSPP.
+
+@item WRB
+@anchor{SET WRB}
+
+PSPP extension to set the floating-point format used for writing data in
+RB format (@pxref{Binary and Hexadecimal Numeric Formats}). The choices
+are the same as SET RIB. The default is NATIVE.
@end table
Output routing subcommands affect where the output of transformations
@item
The PERMISSIONS command.
@item
-Pipe filenames (filenames beginning or ending with @samp{|}).
+Pipes (file names beginning or ending with @samp{|}).
@end itemize
Be aware that this setting does not guarantee safety (commands can still