* DESCRIPTIVES:: Descriptive statistics.
* FREQUENCIES:: Frequency tables.
* EXAMINE:: Testing data for normality.
+* CORRELATIONS:: Correlation tables.
* CROSSTABS:: Crosstabulation tables.
+* FACTOR:: Factor analysis and Principal Components analysis
* NPAR TESTS:: Nonparametric tests.
* T-TEST:: Test hypotheses about means.
* ONEWAY:: One way analysis of variance.
* RANK:: Compute rank scores.
* REGRESSION:: Linear regression.
* RELIABILITY:: Reliability analysis.
+* ROC:: Receiver Operating Characteristic.
@end menu
@node DESCRIPTIVES
there are many distinct values, then @cmd{EXAMINE} will produce a very
large quantity of output.
+@node CORRELATIONS
+@section CORRELATIONS
+
+@vindex CORRELATIONS
+@display
+CORRELATIONS
+ /VARIABLES = varlist [ WITH varlist ]
+ [
+ .
+ .
+ .
+ /VARIABLES = varlist [ WITH varlist ]
+ /VARIABLES = varlist [ WITH varlist ]
+ ]
+
+ [ /PRINT=@{TWOTAIL, ONETAIL@} @{SIG, NOSIG@} ]
+ [ /STATISTICS=DESCRIPTIVES XPROD ALL]
+ [ /MISSING=@{PAIRWISE, LISTWISE@} @{INCLUDE, EXCLUDE@} ]
+@end display
+
+@cindex correlation
+The @cmd{CORRELATIONS} procedure produces tables of the Pearson correlation coefficient
+for a set of variables. The significance of the coefficients are also given.
+
+At least one VARIABLES subcommand is required. If the WITH keyword is used, then a non-square
+correlation table will be produced.
+The variables preceding WITH, will be used as the rows of the table, and the variables following
+will be the columns of the table.
+If no WITH subcommand is given, then a square, symmetrical table using all variables is produced.
+
+
+The @cmd{MISSING} subcommand determines the handling of missing variables.
+If INCLUDE is set, then user-missing values are included in the
+calculations, but system-missing values are not.
+If EXCLUDE is set, which is the default, user-missing
+values are excluded as well as system-missing values.
+This is the default.
+
+If LISTWISE is set, then the entire case is excluded from analysis
+whenever any variable specified in any @cmd{/VARIABLES} subcommand
+contains a missing value.
+If PAIRWISE is set, then a case is considered missing only if either of the
+values for the particular coefficient are missing.
+The default is PAIRWISE.
+
+The PRINT subcommand is used to control how the reported significance values are printed.
+If the TWOTAIL option is used, then a two-tailed test of significance is
+printed. If the ONETAIL option is given, then a one-tailed test is used.
+The default is TWOTAIL.
+
+If the NOSIG option is specified, then correlation coefficients with significance less than
+0.05 are highlighted.
+If SIG is specified, then no highlighting is performed. This is the default.
+
+@cindex covariance
+The STATISTICS subcommand requests additional statistics to be displayed. The keyword
+DESCRIPTIVES requests that the mean, number of non-missing cases, and the non-biased
+estimator of the standard deviation are displayed.
+These statistics will be displayed in a separated table, for all the variables listed
+in any /VARIABLES subcommand.
+The XPROD keyword requests cross-product deviations and covariance estimators to
+be displayed for each pair of variables.
+The keyword ALL is the union of DESCRIPTIVES and XPROD.
@node CROSSTABS
@section CROSSTABS
Fixes for any of these deficiencies would be welcomed.
+@node FACTOR
+@section FACTOR
+
+@vindex FACTOR
+@cindex factor analysis
+@cindex principal components analysis
+@cindex principal axis factoring
+@cindex data reduction
+
+@display
+FACTOR VARIABLES=var_list
+
+ [ /METHOD = @{CORRELATION, COVARIANCE@} ]
+
+ [ /EXTRACTION=@{PC, PAF@}]
+
+ [ /PRINT=[INITIAL] [EXTRACTION] [UNIVARIATE] [CORRELATION] [COVARIANCE] [DET] [SIG] [ALL] [DEFAULT] ]
+
+ [ /PLOT=[EIGEN] ]
+
+ [ /FORMAT=[SORT] [BLANK(@var{n})] [DEFAULT] ]
+
+ [ /CRITERIA=[FACTORS(@var{n})] [MINEIGEN(@var{l})] [ITERATE(@var{m})] [ECONVERGE (@var{delta})] [DEFAULT] ]
+
+ [ /MISSING=[@{LISTWISE, PAIRWISE@}] [@{INCLUDE, EXCLUDE@}] ]
+@end display
+
+The FACTOR command performs Factor Analysis or Principal Axis Factoring on a dataset. It may be used to find
+common factors in the data or for data reduction purposes.
+
+The VARIABLES subcommand is required. It lists the variables which are to partake in the analysis.
+
+The /EXTRACTION subcommand is used to specify the way in which factors (components) are extracted from the data.
+If PC is specified, then Principal Components Analysis is used. If PAF is specified, then Principal Axis Factoring is
+used. By default Principal Components Analysis will be used.
+
+The /METHOD subcommand should be used to determine whether the covariance matrix or the correlation matrix of the data is
+to be analysed. By default, the correlation matrix is analysed.
+
+The /PRINT subcommand may be used to select which features of the analysis are reported:
+
+@itemize
+@item UNIVARIATE
+ A table of mean values, standard deviations and total weights are printed.
+@item INITIAL
+ Initial communalities and eigenvalues are printed.
+@item EXTRACTION
+ Extracted communalities and eigenvalues are printed.
+@item CORRELATION
+ The correlation matrix is printed.
+@item COVARIANCE
+ The covariance matrix is printed.
+@item DET
+ The determinant of the correlation or covariance matrix is printed.
+@item SIG
+ The significance of the elements of correlation matrix is printed.
+@item ALL
+ All of the above are printed.
+@item DEFAULT
+ Identical to INITIAL and EXTRACTION.
+@end itemize
+
+If /PLOT=EIGEN is given, then a ``Scree'' plot of the eigenvalues will be printed. This can be useful for visualising
+which factors (components) should be retained.
+
+The /FORMAT subcommand determined how data are to be displayed in loading matrices. If SORT is specified, then the variables
+are sorted in descending order of significance. If BLANK(@var{n}) is specified, then coefficients whose absolute value is less
+than @var{n} will not be printed. If the keyword DEFAULT is given, or if no /FORMAT subcommand is given, then no sorting is
+performed, and all coefficients will be printed.
+
+The /CRITERIA subcommand is used to specify how the number of extracted factors (components) are chosen. If FACTORS(@var{n}) is
+specified, where @var{n} is an integer, then @var{n} factors will be extracted. Otherwise, the MINEIGEN setting will
+be used. MINEIGEN(@var{l}) requests that all factors whose eigenvalues are greater than or equal to @var{l} are extracted.
+The default value of @var{l} is 1. The ECONVERGE and ITERATE settings have effect only when iterative algorithms for factor
+extraction (such as Principal Axis Factoring) are used. ECONVERGE(@var{delta}) specifies that iteration should cease when
+the maximum absolute value of the communality estimate between one iteration and the previous is less than @var{delta}. The
+default value of @var{delta} is 0.001.
+The ITERATE(@var{m}) setting sets the maximum number of iterations to @var{m}. The default value of @var{m} is 25.
+
+The @cmd{MISSING} subcommand determines the handling of missing variables.
+If INCLUDE is set, then user-missing values are included in the
+calculations, but system-missing values are not.
+If EXCLUDE is set, which is the default, user-missing
+values are excluded as well as system-missing values.
+This is the default.
+If LISTWISE is set, then the entire case is excluded from analysis
+whenever any variable specified in the @cmd{VARIABLES} subcommand
+contains a missing value.
+If PAIRWISE is set, then a case is considered missing only if either of the
+values for the particular coefficient are missing.
+The default is LISTWISE.
+
+
@node NPAR TESTS
@section NPAR TESTS
+@node ROC
+@section ROC
+
+@vindex ROC
+@cindex Receiver Operating Characterstic
+@cindex Area under curve
+
+@display
+ROC @var{var_list} BY @var{state_var} (@var{state_value})
+ /PLOT = @{ CURVE [(REFERENCE)], NONE @}
+ /PRINT = [ SE ] [ COORDINATES ]
+ /CRITERIA = [ CUTOFF(@{INCLUDE,EXCLUDE@}) ]
+ [ TESTPOS (@{LARGE,SMALL@}) ]
+ [ CI (@var{confidence}) ]
+ [ DISTRIBUTION (@{FREE, NEGEXPO @}) ]
+ /MISSING=@{EXCLUDE,INCLUDE@}
+@end display
+
+
+The @cmd{ROC} command is used to plot the receiver operating characteristic curve
+of a dataset, and to estimate the area under the curve.
+This is useful for analysing the efficacy of a variable as a predictor of a state of nature.
+
+The mandatory @var{var_list} is the list of predictor variables.
+The variable @var{state_var} is the variable whose values represent the actual states,
+and @var{state_value} is the value of this variable which represents the positive state.
+
+The optional subcommand PLOT is used to determine if and how the ROC curve is drawn.
+The keyword CURVE means that the ROC curve should be drawn, and the optional keyword REFERENCE,
+which should be enclosed in parentheses, says that the diagonal reference line should be drawn.
+If the keyword NONE is given, then no ROC curve is drawn.
+By default, the curve is drawn with no reference line.
+
+The optional subcommand PRINT determines which additional tables should be printed.
+Two additional tables are available.
+The SE keyword says that standard error of the area under the curve should be printed as well as
+the area itself.
+In addition, a p-value under the null hypothesis that the area under the curve equals 0.5 will be
+printed.
+The COORDINATES keyword says that a table of coordinates of the ROC curve should be printed.
+
+The CRITERIA subcommand has four optional parameters:
+@itemize @bullet
+@item The TESTPOS parameter may be LARGE or SMALL.
+LARGE is the default, and says that larger values in the predictor variables are to be
+considered positive. SMALL indicates that smaller values should be considered positive.
+
+@item The CI parameter specifies the confidence interval that should be printed.
+It has no effect if the SE keyword in the PRINT subcommand has not been given.
+
+@item The DISTRIBUTION parameter determines the method to be used when estimating the area
+under the curve.
+There are two possibilities, @i{viz}: FREE and NEGEXPO.
+The FREE method uses a non-parametric estimate, and the NEGEXPO method a bi-negative
+exponential distribution estimate.
+The NEGEXPO method should only be used when the number of positive actual states is
+equal to the number of negative actual states.
+The default is FREE.
+
+@item The CUTOFF parameter is for compatibility and is ignored.
+@end itemize
+
+The MISSING subcommand determines whether user missing values are to
+be included or excluded in the analysis. The default behaviour is to
+exclude them.
+Cases are excluded on a listwise basis; if any of the variables in @var{var_list}
+or if the variable @var{state_var} is missing, then the entire case will be
+excluded.
+
+