file handle (@pxref{File Handles}). If the @subcmd{FILE} subcommand is not used,
then input is assumed to be specified within the command file using
@cmd{BEGIN DATA}@dots{}@cmd{END DATA} (@pxref{BEGIN DATA}).
-The @subcmd{ENCODING} subcommand may only be used if the @subcmd{FILE} subcommand is also used.
-It specifies the character encoding of the file.
+The @subcmd{ENCODING} subcommand may only be used if the @subcmd{FILE}
+subcommand is also used. It specifies the character encoding of the
+file. @xref{INSERT}, for information on supported encodings.
The optional @subcmd{RECORDS} subcommand, which takes a single integer as an
argument, is used to specify the number of lines per record.
Each variable specification consists of a list of variable names
followed by a description of their location on the input line. Sets of
-variables may be specified using the @code{DATA LIST} TO convention
+variables may be specified using the @cmd{DATA LIST} @subcmd{TO} convention
(@pxref{Sets of
Variables}). There are two ways to specify the location of the variable
on the line: columnar style and FORTRAN style.
The @subcmd{NOTABLE} and @subcmd{TABLE} subcommands are as in @cmd{DATA LIST FIXED} above.
@subcmd{NOTABLE} is the default.
-The @subcmd{FILE} and @subcmd{SKIP} subcommands are as in @cmd{DATA LIST FIXED} above.
+The @subcmd{FILE}, @subcmd{SKIP}, and @subcmd{ENCODING} subcommands
+are as in @cmd{DATA LIST FIXED} above.
The variables to be parsed are given as a single list of variable names.
This list must be introduced by a single slash (@samp{/}). The set of
DATA LIST LIST
[(@{TAB,'@var{c}'@}, @dots{})]
[@{NOTABLE,TABLE@}]
- [FILE='@var{file_name'} [ENCODING='@var{encoding}']]
+ [FILE='@var{file_name}' [ENCODING='@var{encoding}']]
[SKIP=@var{record_count}]
/@var{var_spec}@dots{}
/NAME='@var{file_name}
[/MODE=CHARACTER]
/TABWIDTH=@var{tab_width}
+ [ENCODING='@var{encoding}']
For binary files in native encoding with fixed-length records:
FILE HANDLE @var{handle_name}
/NAME='@var{file_name}'
/MODE=IMAGE
[/LRECL=@var{rec_len}]
+ [ENCODING='@var{encoding}']
For binary files in native encoding with variable-length records:
FILE HANDLE @var{handle_name}
/NAME='@var{file_name}'
/MODE=BINARY
[/LRECL=@var{rec_len}]
+ [ENCODING='@var{encoding}']
For binary files encoded in EBCDIC:
FILE HANDLE @var{handle_name}
/MODE=360
/RECFORM=@{FIXED,VARIABLE,SPANNED@}
[/LRECL=@var{rec_len}]
+ [ENCODING='@var{encoding}']
@end display
Use @cmd{FILE HANDLE} to associate a file handle name with a file and
handle. It is required in all modes but SCRATCH mode, in which its
use is forbidden.
+The ENCODING subcommand specifies the encoding of text in the file.
+For reading text files in CHARACTER mode, all of the forms described
+for ENCODING on the INSERT command are supported (@pxref{INSERT}).
+For reading in other file-based modes, encoding autodetection is not
+supported; if the specified encoding requests autodetection then the
+default encoding will be used. This is also true when a file handle
+is used for writing a file in any mode.
+
@node INPUT PROGRAM
@section INPUT PROGRAM
@vindex INPUT PROGRAM
specified then all variables in the active dataset are printed.
The @subcmd{CASES} subcommand can be used to specify a subset of cases to be
-printed. Specify FROM and the case number of the first case to print,
-TO and the case number of the last case to print, and BY and the number
+printed. Specify @subcmd{FROM} and the case number of the first case to print,
+@subcmd{TO} and the case number of the last case to print, and @subcmd{BY} and the number
of cases to advance between printing cases, or any subset of those
-settings. If CASES is not specified then all cases are printed.
+settings. If @subcmd{CASES} is not specified then all cases are printed.
-The @subcmd{FORMAT} subcommand can be used to change the output format. NUMBERED
-will print case numbers along with each case; UNNUMBERED, the default,
-causes the case numbers to be omitted. The WRAP and SINGLE settings are
+The @subcmd{FORMAT} subcommand can be used to change the output format. @subcmd{NUMBERED}
+will print case numbers along with each case; @subcmd{UNNUMBERED}, the default,
+causes the case numbers to be omitted. The @subcmd{WRAP} and @subcmd{SINGLE} settings are
currently not used.
Case numbers start from 1. They are counted after all transformations
@display
PRINT
- OUTFILE='@var{file_name}'
- RECORDS=@var{n_lines}
- @{NOTABLE,TABLE@}
+ [OUTFILE='@var{file_name}']
+ [RECORDS=@var{n_lines}]
+ [@{NOTABLE,TABLE@}]
+ [ENCODING='@var{encoding}']
[/[@var{line_no}] @var{arg}@dots{}]
@var{arg} takes one of the following forms:
inserted at beginning of each output line, even lines that otherwise
would be blank.
+The @subcmd{ENCODING} subcommand may only be used if the
+@subcmd{OUTFILE} subcommand is also used. It specifies the character
+encoding of the file. @xref{INSERT}, for information on supported
+encodings.
+
The @subcmd{RECORDS} subcommand specifies the number of lines to be output. The
number of lines may optionally be surrounded by parentheses.
be specified using multiple slashes with the intended output for a line
following its respective slash.
-
Literal strings may be printed. Specify the string itself. Optionally
the string may be followed by a column number or range of column
numbers, specifying the location on the line for the string to be
The first line of output is written with @samp{1} inserted in the
first column. Commonly, this is the only line of output. If
additional lines of output are specified, these additional lines are
-written with a space inserted in the first column, as with PRINT.
+written with a space inserted in the first column, as with @subcmd{PRINT}.
@xref{PRINT}, for more information on syntax and usage.
@vindex PRINT SPACE
@display
-PRINT SPACE OUTFILE='file_name' n_lines.
+PRINT SPACE [OUTFILE='file_name'] [ENCODING='@var{encoding}'] [n_lines].
@end display
@cmd{PRINT SPACE} prints one or more blank lines to an output file.
Handles}). If OUTFILE is not specified then output will be directed to
the listing file.
+The @subcmd{ENCODING} subcommand may only be used if @subcmd{OUTFILE}
+is also used. It specifies the character encoding of the file.
+@xref{INSERT}, for information on supported encodings.
+
n_lines is also optional. If present, it is an expression
(@pxref{Expressions}) specifying the number of blank lines to be
printed. The expression must evaluate to a nonnegative value.
@vindex REREAD
@display
-REREAD FILE=handle COLUMN=column.
+REREAD [FILE=handle] [COLUMN=column] [ENCODING='@var{encoding}'].
@end display
The @cmd{REREAD} transformation allows the previous input line in a
the first column that should be included in the re-read line. Columns
are numbered from 1 at the left margin.
+The @subcmd{ENCODING} subcommand may only be used if the @subcmd{FILE}
+subcommand is also used. It specifies the character encoding of the
+file. @xref{INSERT}, for information on supported encodings.
+
Issuing @code{REREAD} multiple times will not back up in the data
file. Instead, it will re-read the same line multiple times.