-The meaning of the remaining data is unknown. It seems likely to
-include font sizes, horizontal and vertical alignment, attributes such
-as bold or italic, and margins.
-
-The table below lists the values observed in the corpus. When a cell
-contains a single value, then 99@math{+}% of the corpus contains that value.
-When a cell contains a pair of values, then the first value is seen in
-about two-thirds of the corpus and the second value in about the
-remaining one-third. In fonts that include multiple pairs, values are
-correlated, that is, for font 3, f5 = 24, f6 = 24, f7 = 2 appears
-about two-thirds of the time, as does the combination of f4 = 0, f6 =
-10 for font 7.
-
-@multitable {font} {40} {f2} {64173} {0/1} {24/11} {10/11} {2/3} {f8}
-@headitem font @tab f1 @tab f2 @tab f3 @tab f4 @tab f5 @tab f6 @tab f7 @tab f8
-@item 1 @tab 40 @tab 1 @tab 0 @tab 0 @tab 8 @tab 10/11 @tab 1 @tab 8
-@item 2 @tab 40 @tab 0 @tab 2 @tab 1 @tab 8 @tab 10/11 @tab 1 @tab 1
-@item 3 @tab 40 @tab 0 @tab 2 @tab 1 @tab 24/11 @tab 24/ 8 @tab 2/3 @tab 4
-@item 4 @tab 40 @tab 0 @tab 2 @tab 3 @tab 8 @tab 10/11 @tab 1 @tab 1
-@item 5 @tab 40 @tab 0 @tab 0 @tab 1 @tab 8 @tab 10/11 @tab 1 @tab 4
-@item 6 @tab 40 @tab 0 @tab 2 @tab 1 @tab 8 @tab 10/11 @tab 1 @tab 4
-@item 7 @tab 40 @tab 0 @tab 64173 @tab 0/1 @tab 8 @tab 10/11 @tab 1 @tab 1
-@item 8 @tab 40 @tab 0 @tab 2 @tab 3 @tab 8 @tab 10/11 @tab 1 @tab 4
-@end multitable
+@code{alternate} is 01 if rows should alternate colors, 00 if all rows
+should be the same color. When @code{alternate} is 01, @code{altfg}
+and @code{altbg} specify the colors for the alternate rows.
+
+@code{left-margin}, @code{right-margin}, @code{top-margin}, and
+@code{bottom-margin} are measured in multiples of 1/96 inch.
+
+@node SPV Light Member Borders
+@subsection Borders
+
+@cartouche
+@format
+Borders @result{}
+ b1[@t{endian}]
+ be32[@t{n-borders}] Border*[@t{n-borders}]
+ bool[@t{show-grid-lines}]
+ 00 00 00
+
+Border @result{}
+ be32[@t{border-type}]
+ be32[@t{stroke-type}]
+ be32[@t{color}]
+@end format
+@end cartouche
+
+The Borders reflect how borders between regions are drawn.
+
+The fixed value of @code{endian} can be used to validate the
+endianness.
+
+@code{show-grid-lines} is 1 to draw grid lines, otherwise 0.
+
+Each Border describes one kind of border. @code{n-borders} seems to
+always be 19. Each @code{border-type} appears once (although in an
+unpredictable order) and correspond to the following borders:
+
+@table @asis
+@item 0
+Title.
+@item 1@dots{}4
+Left, top, right, and bottom outer frame.
+@item 5@dots{}8
+Left, top, right, and bottom inner frame.
+@item 9, 10
+Left and top of data area.
+@item 11, 12
+Horizontal and vertical dimension rows.
+@item 13, 14
+Horizontal and vertical dimension columns.
+@item 15, 16
+Horizontal and vertical category rows.
+@item 17, 18
+Horizontal and vertical category columns.
+@end table
+
+@code{stroke-type} describes how a border is drawn, as one of:
+
+@table @asis
+@item 0
+No line.
+@item 1
+Solid line.
+@item 2
+Dashed line.
+@item 3
+Thick line.
+@item 4
+Thin line.
+@item 5
+Double line.
+@end table
+
+@code{color} is an RGB color. Bits 24--31 are alpha, bits 16--23 are
+red, 8--15 are green, 0--7 are blue. An alpha of 255 indicates an
+opaque color, therefore opaque black is 0xff000000.
+
+@node SPV Light Member Print Settings
+@subsection Print Settings
+
+@cartouche
+@format
+PrintSettings @result{}
+ b1[@t{endian}]
+ bool[@t{all-layers}]
+ bool[@t{paginate-layers}]
+ bool[@t{fit-width}]
+ bool[@t{fit-length}]
+ bool[@t{top-continuation}]
+ bool[@t{bottom-continuation}]
+ be32[@t{n-orphan-lines}]
+ bestring[@t{continuation-string}]
+@end format
+@end cartouche
+
+The PrintSettings reflect settings for printing. The fixed value of
+@code{endian} can be used to validate the endianness.
+
+@code{all-layers} is 1 to print all layers, 0 to print only the
+visible layers.
+
+@code{paginate-layers} is 1 to print each layer at the start of a new
+page, 0 otherwise. (This setting is honored only @code{all-layers} is
+1, since otherwise only one layer is printed.)
+
+@code{fit-width} and @code{fit-length} control whether the table is
+shrunk to fit within a page's width or length, respectively.
+
+@code{n-orphan-lines} is the minimum number of rows or columns to put
+in one part of a table that is broken across pages.
+
+If @code{top-continuation} is 1, then @code{continuation-string} is
+printed at the top of a page when a table is broken across pages for
+printing; similarly for @code{bottom-continuation} and the bottom of a
+page. Usually, @code{continuation-string} is empty.
+
+@node SPV Light Member Table Settings
+@subsection Table Settings
+
+@cartouche
+@format
+TableSettings @result{}
+ be32[@t{endian}]
+ be32
+ be32[@t{current-layer}]
+ bool[@t{omit-empty}]
+ bool[@t{show-row-labels-in-corner}]
+ bool[@t{show-alphabetic-markers}]
+ bool[@t{footnote-marker-position}]
+ v3(
+ byte
+ be32[@t{n}] byte*[@t{n}]
+ bestring[@t{notes}]
+ bestring[@t{table-look}]
+ 00...
+ )
+@end format
+@end cartouche
+
+The TableSettings reflect display settings. The fixed value of
+@code{endian} can be used to validate the endianness.
+
+@code{current-layer} is the displayed layer.
+
+If @code{omit-empty} is 1, empty rows or columns (ones with nothing in
+any cell) are hidden; otherwise, they are shown.
+
+If @code{show-row-labels-in-corner} is 1, then row labels are shown in
+the upper left corner; otherwise, they are shown nested.
+
+If @code{show-alphabetic-markers} is 1, markers are shown as letters
+(e.g. @samp{a}, @samp{b}, @samp{c}, @dots{}); otherwise, they are
+shown as numbers starting from 1.
+
+When @code{footnote-marker-position} is 1, footnote markers are shown
+as superscripts, otherwise as subscripts.
+
+@code{notes} is a text string that contains user-specified notes. It
+is displayed when the user hovers the cursor over the table, like
+``alt text'' on a webpage. It is not printed. It is usually empty.
+
+@code{table-look} is the name of a SPSS ``TableLook'' table style,
+such as ``Default'' or ``Academic''; it is often empty.
+
+TableSettings ends with an arbitrary number of null bytes.
projects / pspp / blobdiff