+#: src/language/data-io/data-parser.c:680
+#: src/language/data-io/data-parser.c:725 src/language/data-io/print.c:435
+msgid "Format"
+msgstr "Format"
+
+#: src/language/data-io/data-parser.c:720
+#, c-format
+msgid "Reading free-form data from %s."
+msgstr "Unformatierte Daten werden aus %s gelesen."
+
+#. TRANSLATORS: this fragment will be interpolated into
+#. messages in fh_lock() that identify types of files.
+#: src/language/data-io/data-reader.c:136
+#: src/language/data-io/data-writer.c:79
+msgid "data file"
+msgstr "Arbeitsdatei"
+
+#: src/language/data-io/data-reader.c:160
+#, c-format
+msgid "Could not open `%s' for reading as a data file: %s."
+msgstr "`%s' konnte nicht als Datendatei zum Lesen geöffnet werden: %s."
+
+#: src/language/data-io/data-reader.c:174
+#, c-format
+msgid "Could not read `%s' as a text file with encoding `%s': %s."
+msgstr "`%s' konnte nicht als Textdatei mit der Kodierung `%s' gelesen werden: %s."
+
+#: src/language/data-io/data-reader.c:233
+#, c-format
+msgid "Missing %s while reading inline data. This probably indicates a missing or incorrectly formatted %s command. %s must appear by itself on a single line with exactly one space between words."
+msgstr "Beim Einlesen von Inline-Daten fehlt %s. Dies deutet auf den fehlenden oder falsch formatierten Befehl %s hin. %s muss in einer eigenen Zeile mit genau einem Leerzeichen zwischen den Wörtern stehen."
+
+#: src/language/data-io/data-reader.c:253
+#: src/language/data-io/data-reader.c:387
+#, c-format
+msgid "Error reading file %s: %s."
+msgstr "Fehler beim Lesen der Datei %s: %s."
+
+#: src/language/data-io/data-reader.c:261
+#, c-format
+msgid "Unexpected end of file in partial record reading %s."
+msgstr "Unerwartetes Dateiende in einem unvollständigen Eintrag beim Lesen von %s."
+
+#: src/language/data-io/data-reader.c:321
+#, c-format
+msgid "Corrupt block descriptor word at offset 0x%lx in %s."
+msgstr "Fehlerhaftes Blockbeschreibungswort beim Offset 0x%lx in %s."
+
+#: src/language/data-io/data-reader.c:322
+#, c-format
+msgid "Corrupt record descriptor word at offset 0x%lx in %s."
+msgstr "Fehlerhaftes Eintragsbeschreibungswort beim Offset 0x%lx in %s."
+
+#: src/language/data-io/data-reader.c:335
+#, c-format
+msgid "Corrupt record size at offset 0x%lx in %s."
+msgstr "Fehlerhafte Eintragslänge beim Offset 0x%lx in %s."
+
+#: src/language/data-io/data-reader.c:493
+msgid "Record exceeds remaining block length."
+msgstr "Der Eintrag übersteigt die verbleibende Blocklänge."
+
+#: src/language/data-io/data-reader.c:567
+#, c-format
+msgid "Attempt to read beyond end-of-file on file %s."
+msgstr "Es wurde versucht in der Datei %s über das Ende hinaus zu lesen."
+
+#: src/language/data-io/data-reader.c:570
+#, c-format
+msgid "Attempt to read beyond %s."
+msgstr "Es wurde versucht über %s hinaus zu lesen."
+
+#: src/language/data-io/data-reader.c:733
+msgid "This command is not valid here since the current input program does not access the inline file."
+msgstr "Dieser Befehl ist hier nicht gültig, da das aktuelle Eingabeprogramm keinen Zugriff auf die Inline-Datei hat."
+
+#: src/language/data-io/data-writer.c:106
+#, c-format
+msgid "An error occurred while opening `%s' for writing as a data file: %s."
+msgstr "Beim Öffnen von `%s' um eine Datendatei zu schreiben, ist ein Fehler aufgetreten: %s."
+
+#: src/language/data-io/data-writer.c:224
+#, c-format
+msgid "I/O error occurred writing data file `%s'."
+msgstr "Ein I/O Fehler ist beim Schreiben der Datendatei `%s' aufgetreten."
+
+#: src/language/data-io/dataset.c:64
+#, c-format
+msgid "There is no dataset named %s."
+msgstr "Es gibt keinen Datensatz namens %s."
+
+#: src/language/data-io/dataset.c:250
+msgid "Datasets"
+msgstr "Datensätze"
+
+#: src/language/data-io/dataset.c:263
+msgid "unnamed dataset"
+msgstr "unbenannter Datensatz"
+
+#: src/language/data-io/file-handle.c:61
+#, c-format
+msgid "File handle %s is already defined. Use %s before redefining a file handle."
+msgstr "Der Dateiidentifikator %s wurde bereits definiert. Bevor Sie einen Dateiidentifikator umdefinieren verwenden Sie bitte %s."
+
+#: src/language/data-io/file-handle.c:241
+#, c-format
+msgid "%s must be specified with %s."
+msgstr "%s erfordert die Angabe von %s."
+
+#: src/language/data-io/file-handle.c:252
+#, c-format
+msgid "The specified file mode requires LRECL. Assuming %zu-character records."
+msgstr "Der angegebene Dateimodus erfordert LRECL. Es werden Einträge mit %zu Zeichen angewendet."
+
+#: src/language/data-io/file-handle.c:256
+#, c-format
+msgid "Record length (%d) must be between 1 and %lu bytes. Assuming %zu-character records."
+msgstr "Die Länge der Einträge (%d) muss zwischen 1 und %lu Bytes liegen. Es wird von Einträgen mit einer Länge von %zu Zeichen ausgegangen."
+
+#: src/language/data-io/file-handle.c:300
+msgid "file"
+msgstr "Datei"
+
+#: src/language/data-io/file-handle.c:302
+msgid "inline file"
+msgstr "Inline-Datei"
+
+#: src/language/data-io/file-handle.c:350
+msgid "expecting a file name or handle name"
+msgstr "es wurde ein Dateinname oder ein Identifikator erwartet"
+
+#: src/language/data-io/file-handle.c:365
+#, c-format
+msgid "Handle for %s not allowed here."
+msgstr "Identifikator für %s ist hier nicht erlaubt."
+
+#: src/language/data-io/get-data.c:108 src/output/measure.c:262
+#, c-format
+msgid "error reading file `%s'"
+msgstr "Fehler beim Lesen der Datei `%s'"
+
+#: src/language/data-io/get-data.c:127
+#, c-format
+msgid "Unsupported TYPE %s."
+msgstr "TYPE %s wird nicht unterstützt."
+
+#: src/language/data-io/get-data.c:278
+msgid "The sheet index must be greater than or equal to 1"
+msgstr "Die Nummer des Datenblatts muss größer oder gleich 1 sein"
+
+#: src/language/data-io/get-data.c:285 src/language/data-io/get-data.c:308
+#: src/language/data-io/get-data.c:327
+#, c-format
+msgid "%s must be followed by either \"%s\" or \"%s\"."
+msgstr "Nach %s muss entweder von \"%s\" oder \"%s\" folgen."
+
+#: src/language/data-io/get-data.c:357
+#, c-format
+msgid "%s is allowed only with %s arrangement, but %s arrangement was stated or implied earlier in this command."
+msgstr "%s ist nur in Verbindung mit /ARRAGEMENT=%s erlaubt, aber es wurde entweder explizit oder implizit in diesem Befehl an früherer Stelle festegelegt, dass /ARRAGEMENT=%s sein soll."
+
+#: src/language/data-io/get-data.c:441 src/language/data-io/get-data.c:479
+#, c-format
+msgid "Value of %s must be 1 or greater."
+msgstr "Der Wert von %s muss 1 oder mehr betragen."
+
+#: src/language/data-io/get-data.c:504
+msgid "Ignoring obsolete IMPORTCASES subcommand. (N OF CASES or SAMPLE may be used to substitute.)"
+msgstr "Der Unterbefehl IMPORTCASES wird ignoriert (ersatzweise können Sie die Befehle N OF CASES oder SAMPLE verwenden)."
+
+#: src/language/data-io/get-data.c:551
+msgid "In compatible syntax mode, the QUALIFIER string must contain exactly one character."
+msgstr "Im Modus Kompatible Syntax muss der String QUALIFIER genau ein Zeichen enthalten."
+
+#: src/language/data-io/get-data.c:583
+#, c-format
+msgid "The record number specified, %ld, is at or before the previous record, %d. Data fields must be listed in order of increasing record number."
+msgstr "Die angegebene Nummer des Eintrags, %ld, liegt beim oder vor dem vorhergehenden Eintrag, %d. Datenfelder müssen in aufsteigender Reihenfolge aufgelistet werden."
+
+#: src/language/data-io/get-data.c:592
+#, c-format
+msgid "The record number specified, %ld, exceeds the number of records per case specified on FIXCASE, %d."
+msgstr "Die angegebene Nummer des Eintrags, %ld, übersteigt die Anzahl der Einträge pro Fall, %d, die mit FIXCASE festgelegt wurde."
+
+#: src/language/data-io/get.c:132
+#, c-format
+msgid "%s: Data file dictionary has no variables."
+msgstr "%s: Im Codebuch der Datei sind keine Variablen verzeichnet."
+
+#: src/language/data-io/inpt-pgm.c:133
+#, c-format
+msgid "Unexpected end-of-file within %s."
+msgstr "Unerwartetes Dateiende innerhalb von %s."
+
+#: src/language/data-io/inpt-pgm.c:146
+#, c-format
+msgid "Input program must contain %s or %s."
+msgstr "INPUT PROGRAM muss %s oder %s enthalten."
+
+#: src/language/data-io/inpt-pgm.c:152
+msgid "Input program did not create any variables."
+msgstr "INPUT PROGRAM hat keine Variablen erzeugt."
+
+#: src/language/data-io/inpt-pgm.c:365
+msgid "REREAD: Column numbers must be positive finite numbers. Column set to 1."
+msgstr "REREAD: Die Spaltennummer muss eine positive endliche Zahl sein. Spaltennummer wird auf 1 gesetzt."
+
+#: src/language/data-io/list.c:100
+msgid "Data List"
+msgstr "Datenliste"
+
+#: src/language/data-io/list.c:221
+#, c-format
+msgid "The first case (%ld) specified precedes the last case (%ld) specified. The values will be swapped."
+msgstr "Der erste angegebene Fall (%ld) liegt vor dem letzten angegebenen Fall (%ld). Die Werte werden vertauscht."
+
+#: src/language/data-io/list.c:230
+#, c-format
+msgid "The first case (%ld) to list is numbered less than 1. The value is being reset to 1."
+msgstr "Der erste auzulistende Fall (%ld) ist kleiner als 1. Der Wert wird auf 1 gesetzt."
+
+#: src/language/data-io/list.c:237
+#, c-format
+msgid "The last case (%ld) to list is numbered less than 1. The value is being reset to 1."
+msgstr "Der letzte auzulistende Fall (%ld) ist kleiner als 1. Der Wert wird auf 1 gesetzt."
+
+#: src/language/data-io/list.c:244
+#, c-format
+msgid "The step value %ld is less than 1. The value is being reset to 1."
+msgstr "Die Schrittgröße %ld ist kleiner als 1. Der Wert wird auf 1 gesetzt."
+
+#: src/language/data-io/placement-parser.c:96
+#, c-format
+msgid "Number of variables specified (%zu) differs from number of variable formats (%zu)."
+msgstr "Die Anzahl der angegebenen Variablen (%zu) stimmt nicht mit der Anzahl der Variablenformate (%zu) überein."
+
+#: src/language/data-io/placement-parser.c:106
+msgid "SPSS-like or Fortran-like format specification expected after variable names."
+msgstr "Nach dem Variablennamen wurde ein Format im SPSS- oder FORTRAN-Stil erwartet."
+
+#: src/language/data-io/placement-parser.c:129
+#, c-format
+msgid "The %d columns %d-%d can't be evenly divided into %zu fields."
+msgstr "Die %d Spalten %d-%d können nicht gleichmäßig auf %zu Felder verteilt werden."
+
+#: src/language/data-io/placement-parser.c:310
+msgid "Column positions for fields must be positive."
+msgstr "Die Spaltenpositionen für die Felder müssen positiv sein."
+
+#: src/language/data-io/placement-parser.c:312
+msgid "Column positions for fields must not be negative."
+msgstr "Die Spaltenpositionen für die Felder dürfen nicht negativ sein."
+
+#: src/language/data-io/placement-parser.c:372
+msgid "The ending column for a field must be greater than the starting column."
+msgstr "Die Endspalte eines Feldes muss größer als die Anfangsspalte sein."
+
+#: src/language/data-io/placement-parser.c:409
+#, c-format
+msgid "The record number specified, %.0f, is at or before the previous record, %d. Data fields must be listed in order of increasing record number."
+msgstr "Die angegebene Nummer des Eintrags, %.0f, liegt beim oder vor dem vorhergehenden Eintrag, %d. Datenfelder müssen in aufsteigender Reihenfolge aufgelistet werden."
+
+#: src/language/data-io/print-space.c:127
+#, c-format
+msgid "The expression on %s evaluated to the system-missing value."
+msgstr "Der Ausdruck in %s wurde als system-fehlender Wert ausgewertet."
+
+#: src/language/data-io/print-space.c:130
+#, c-format
+msgid "The expression on %s evaluated to %g."
+msgstr "Der Ausdruck in %s wurde als %g ausgewertet."
+
+#: src/language/data-io/print.c:189 src/language/data-io/trim.c:58
+msgid "expecting a valid subcommand"
+msgstr "es wurde ein gültiger Unterbefehl erwartet"
+
+#: src/language/data-io/print.c:219
+#, c-format
+msgid "%s is required when binary formats are specified."
+msgstr "Bei der Angabe von Binärformaten ist %s erforderlich."
+
+#: src/language/data-io/print.c:302
+#, c-format
+msgid "Output calls for %d records but %zu specified on RECORDS subcommand."
+msgstr "Die Ausgabe erfordert %d Einträge, es wurden aber mit den Unterbefehl RECORDS %zu Einträge angegeben."
+
+#: src/language/data-io/print.c:432
+msgid "Print Summary"
+msgstr "Ausgabe der Zusammenfassung"
+
+#: src/language/data-io/print.c:462
+msgid "N of Records"
+msgstr "Anz. Datensätze"
+
+#: src/language/data-io/matrix-data.c:191
+#, c-format
+msgid "There are %d variable declared but the data has at least %d matrix rows."
+msgstr "Es wurden %d Variablen spezifiziert, in den Daten sind aber mindestens %d Matrix-Zeilen enthalten."
+
+#: src/language/data-io/matrix-data.c:292
+msgid "The N subcommand was specified, but a N record was also found in the data. The N record will be ignored."
+msgstr "Der Unterbefehl N wurde angegeben, aber es wurde auch ein Eintrag für N in den Daten gefunden. Der N-Eintrag wird ignoriert."
+
+#: src/language/data-io/matrix-data.c:488 src/language/utilities/set.q:186
+#, c-format
+msgid "%s must not be negative."
+msgstr "%s darf nicht negativ sein."
+
+#: src/language/data-io/matrix-data.c:568
+msgid "FORMAT = FULL and FORMAT = NODIAGONAL are mutually exclusive."
+msgstr "FORMAT = FULL und FORMAT = NODIAGONAL schließen sich gegeseitig aus."
+
+#: src/language/data-io/matrix-reader.c:102
+#: src/language/data-io/matrix-reader.c:118
+#, c-format
+msgid "Matrix dataset lacks a variable called %s."
+msgstr "Im Matrix-Datensatz fehlt die Variable %s."
+
+#: src/language/data-io/matrix-reader.c:109
+#: src/language/data-io/matrix-reader.c:125
+#, c-format
+msgid "Matrix dataset variable %s should be of string type."
+msgstr "Die Variable %s im Matrix-Datensatz sollte vom Typ String sein."
+
+#: src/language/data-io/save-translate.c:168
+#: src/language/data-io/save-translate.c:183
+#, c-format
+msgid "The %s string must contain exactly one character."
+msgstr "Der %s String muss genau ein Zeichen enthalten."
+
+#: src/language/data-io/save-translate.c:249
+#, c-format
+msgid "Output file `%s' exists but %s was not specified."
+msgstr "Die Ausgabedatei `%s' existiert, aber %s wurde nicht angegeben."
+
+#: src/language/data-io/save.c:309
+msgid "The OUTFILE or METADATA subcommand is required."
+msgstr "Das Unterkommando OUTFILE oder METADATA wird benötigt."
+
+#: src/language/data-io/trim.c:69
+#, c-format
+msgid "Cannot rename %s as %s because there already exists a variable named %s. To rename variables with overlapping names, use a single RENAME subcommand such as `/RENAME (A=B)(B=C)(C=A)', or equivalently, `/RENAME (A B C=B C A)'."
+msgstr "%s kann nicht zu %s umbenannt werden, weil eine Variable mit dem Namen %s bereits existiert. Um mehrere Variablen mit sich gegenseitig überlappenden Namen umzubenennen, verwenden Sie den Unterbefehl RENAME, wie z.B. in `/RENAME (A=B)(B=C)(C=A)' oder auch gleichbedeutend in `/RENAME (A B C=B C A)'."
+
+#: src/language/data-io/trim.c:227
+#, c-format
+msgid "Number of variables on left side of `=' (%zu) does not match number of variables on right side (%zu), in parenthesized group %d of RENAME subcommand."
+msgstr "Die Anzahl der Variablen auf der linken Seite von `=' (%zu) stimmt nicht mit der Anzahl der Variablen auf der rechten Seite (%zu) in der eingeklammerten Gruppe %d des Befehls RENAME überein."
+
+#: src/language/data-io/trim.c:242
+#, c-format
+msgid "Requested renaming duplicates variable name %s."
+msgstr "Es wurde angefragt, ob der doppelte Variablenname %s umbenannt werden soll."
+
+#: src/language/data-io/trim.c:281
+msgid "Cannot DROP all variables from dictionary."
+msgstr "Mit DROP können nicht alle Variablen aus dem Codebuch gelöscht werden."
+
+#: src/language/expressions/evaluate.c:151
+msgid "expecting number or string"
+msgstr "es wurde eine Zahl oder eine Zeichenfolge erwartet"
+
+#: src/language/expressions/helpers.c:43
+msgid "One of the arguments to a DATE function is not an integer. The result will be system-missing."
+msgstr "Eines der Argumente der Funktion DATE ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:71
+msgid "The week argument to DATE.WKYR is not an integer. The result will be system-missing."
+msgstr "Das Argument week der Funktion DATE.WKYR ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:77
+msgid "The week argument to DATE.WKYR is outside the acceptable range of 1 to 53. The result will be system-missing."
+msgstr "Das Argument week der Funktion DATE.WKYR ist nicht innerhalb des akzeptierten Bereichs von 1 bis 53. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:99
+msgid "The day argument to DATE.YRDAY is not an integer. The result will be system-missing."
+msgstr "Das Argument day der Funktion DATE.YRDAY ist nicht vom Typ Integer. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:105
+msgid "The day argument to DATE.YRDAY is outside the acceptable range of 1 to 366. The result will be system-missing."
+msgstr "Das Argument Tag der Funktion DATE.YRDAY ist nicht innerhalb des akzeptierten Bereichs von 1 bis 366. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:127
+msgid "The year argument to YRMODA is greater than 47516. The result will be system-missing."
+msgstr "Das Argument year in YRMODA ist größer als 47516. Das Ergebnis ist system-fehlender Wert."
+
+#: src/language/expressions/helpers.c:180
+#, c-format
+msgid "Unrecognized date unit `%.*s'. Valid date units are `%s', `%s', `%s', `%s', `%s', `%s', `%s', and `%s'."
+msgstr "Nicht erkannte Datumsangabe `%.*s'. Gültige Datumsangaben sind `%s', `%s', `%s', `%s', `%s', `%s', `%s' und `%s'."
+
+#: src/language/expressions/helpers.c:333
+#, c-format
+msgid "Invalid DATESUM method. Valid choices are `%s' and `%s'."
+msgstr "Ungültige Methode DATESUM. Zur Auswahl stehen `%s' und `%s'."
+
+#: src/language/expressions/parse.c:261
+#, c-format
+msgid "Type mismatch: expression has %s type, but a numeric value is required here."
+msgstr "Diskrepanz der Typen: der Ausdruck ist vom Typ %s, aber an dieser Stelle ist ein numerischer Wert erforderlich."
+
+#: src/language/expressions/parse.c:274
+#, c-format
+msgid "Type mismatch: expression has %s type, but a string value is required here."
+msgstr "Diskrepanz der Typen: der Ausdruck ist vom Typ %s, aber an dieser Stelle ist ein String erforderlich."
+
+#: src/language/expressions/parse.c:436
+#, c-format
+msgid "Type mismatch while applying %s operator: cannot convert %s to %s."
+msgstr "Diskrepanz der Typen bei der Anwendung des Operators %s: %s kann nicht zu %s umgewandelt werden."
+
+#: src/language/expressions/parse.c:650
+msgid "Chaining relational operators (e.g. `a < b < c') will not produce the mathematically expected result. Use the AND logical operator to fix the problem (e.g. `a < b AND b < c'). If chaining is really intended, parentheses will disable this warning (e.g. `(a < b) < c'.)"
+msgstr "Die Verkettung relationaler Operatoren (z.B. `a < b < c') führt nicht zum erwarteten mathematischen Ergebnis. Verwenden Sie den Logikoperator AND, um dieses Problem zi beheben (z.B. `a < b AND b < c'). Falls Sie tatsächlich eine Verkettung vornehmen wollen, verwenden Sie Klammern, um diese Warnung zu unterdrücken (z.B. `(a < b) < c')."
+
+#: src/language/expressions/parse.c:752
+msgid "The exponentiation operator (`**') is left-associative, even though right-associative semantics are more useful. That is, `a**b**c' equals `(a**b)**c', not as `a**(b**c)'. To disable this warning, insert parentheses."
+msgstr "Der Operator für Exponenten (`**') ist immer mit dem linken Argument verknüpft, obwohl eine rechts-seitige Verknüpfung praktischer wäre. D.h. der Ausdruck `a**b**c' ist gleichbedeutend mit `(a**b)**c', aber nicht mit dem Ausdruck `a**(b**c)'. Um diese Warnung zu unterdrücken, fügen Sie die passenden Klammern ein."
+
+#: src/language/expressions/parse.c:832
+#, c-format
+msgid "Unknown system variable %s."
+msgstr "Unbekannt Systemvariable %s."
+
+#: src/language/expressions/parse.c:880
+#, c-format
+msgid "Unknown identifier %s."
+msgstr "Unbekannter Bezeichner %s."
+
+#: src/language/expressions/parse.c:1102
+#, c-format
+msgid "%s must have at least %d arguments in list."
+msgstr "%s muss mindestens %d Argumente in der Liste haben."
+
+#: src/language/expressions/parse.c:1111
+#, c-format
+msgid "%s must have an even number of arguments in list."
+msgstr "%s muss eine gerade Anzahl von Argumenten in der Liste haben."
+
+#: src/language/expressions/parse.c:1114
+#, c-format
+msgid "%s must have multiple of %d arguments in list."
+msgstr "%s muss ein Vielfachenes von %d Argumenten in der Liste haben."
+
+#: src/language/expressions/parse.c:1124
+#, c-format
+msgid "%s function does not accept a minimum valid argument count."
+msgstr "Für die Funktion %s kann die minimale Anzahl von gültigen Argumenten nicht festgelegt werden."
+
+#: src/language/expressions/parse.c:1133
+#, c-format
+msgid "%s requires at least %d valid arguments in list."
+msgstr "%s erfordert mindestens %d gültige Argumente in der Liste."
+
+#: src/language/expressions/parse.c:1139
+#, c-format
+msgid "With %s, using minimum valid argument count of %d does not make sense when passing only %d arguments in list."
+msgstr "Beim der Verwendung von %s ergibt es keinen Sinn die minimale Anzahl von %d Argumenten anzugeben, wenn in der Liste nur %d Argumente übergeben werden. "
+
+#: src/language/expressions/parse.c:1193
+#, c-format
+msgid "Type mismatch invoking %s as "
+msgstr "Diskrepanz der Typen beim Aufruf von %s als "
+
+#: src/language/expressions/parse.c:1198
+msgid "Function invocation "
+msgstr "Funktionaufruf "
+
+#: src/language/expressions/parse.c:1200
+msgid " does not match any known function. Candidates are:"
+msgstr " passt nicht zu einer bekannten Funktion. Mögliche Kandidaten wären:"
+
+#: src/language/expressions/parse.c:1230
+#, c-format
+msgid "No function or vector named %s."
+msgstr "Eine Funktion oder einen Vektor mit dem Namen %s gibt es nicht."
+
+#: src/language/expressions/parse.c:1292
+#, c-format
+msgid "%s is a PSPP extension."
+msgstr "%s ist eine PSPP-Erweiterung."
+
+#: src/language/expressions/parse.c:1295
+#, c-format
+msgid "%s is not available in this version of PSPP."
+msgstr "%s ist in dieser Version von PSPP nicht verfügbar."
+
+#: src/language/expressions/parse.c:1302
+#, c-format
+msgid "%s may not appear after %s."
+msgstr "%s darf nicht nach %s erscheinen."
+
+#: src/libpspp/ext-array.c:66
+msgid "failed to create temporary file"
+msgstr "die temporäre Datei konnte nicht erzeugt werden"
+
+#: src/libpspp/ext-array.c:106
+msgid "seeking in temporary file"
+msgstr "in der temporären Datei wird gesucht"
+
+#: src/libpspp/ext-array.c:125
+msgid "reading temporary file"
+msgstr "die temporäre Datei wird gelesen"
+
+#: src/libpspp/ext-array.c:127
+msgid "unexpected end of file reading temporary file"
+msgstr "unerwartetes Ende der Datei beim Lesen der temporären Datei"
+
+#: src/libpspp/ext-array.c:147
+msgid "writing to temporary file"
+msgstr "es wird in die temporäre Datei geschrieben"
+
+#: src/libpspp/i18n.c:1128
+msgid "Arabic"
+msgstr "Arabisch"
+
+#: src/libpspp/i18n.c:1130
+msgid "Armenian"
+msgstr "Armenisch"
+
+#: src/libpspp/i18n.c:1131
+msgid "Baltic"
+msgstr "Baltisch"
+
+#: src/libpspp/i18n.c:1133
+msgid "Celtic"
+msgstr "Keltisch"
+
+#: src/libpspp/i18n.c:1134
+msgid "Central European"
+msgstr "Zentraleuropäisch"
+
+#: src/libpspp/i18n.c:1136
+msgid "Chinese Simplified"
+msgstr "Chinesisch, vereinfacht"
+
+#: src/libpspp/i18n.c:1138
+msgid "Chinese Traditional"
+msgstr "Chinesisch, traditionell"
+
+#: src/libpspp/i18n.c:1140
+msgid "Croatian"
+msgstr "Kroatisch"
+
+#: src/libpspp/i18n.c:1141
+msgid "Cyrillic"
+msgstr "Kyrillisch"
+
+#: src/libpspp/i18n.c:1143
+msgid "Cyrillic/Russian"
+msgstr "Kyrillisch, Russisch"
+
+#: src/libpspp/i18n.c:1144
+msgid "Cyrillic/Ukrainian"
+msgstr "Kyrillisch, Ukrainisch"
+
+#: src/libpspp/i18n.c:1146
+msgid "Georgian"
+msgstr "Georgisch"
+
+#: src/libpspp/i18n.c:1147
+msgid "Greek"
+msgstr "Griechisch"
+
+#: src/libpspp/i18n.c:1148
+msgid "Gujarati"
+msgstr "Gujaratisch"
+
+#: src/libpspp/i18n.c:1149
+msgid "Gurmukhi"
+msgstr "Gurmukhi"
+
+#: src/libpspp/i18n.c:1150
+msgid "Hebrew"
+msgstr "Hebräisch"
+
+#: src/libpspp/i18n.c:1152
+msgid "Hebrew Visual"
+msgstr "Hebräisch, visuell"
+
+#: src/libpspp/i18n.c:1153
+msgid "Hindi"
+msgstr "Hindi"
+
+#: src/libpspp/i18n.c:1154
+msgid "Icelandic"
+msgstr "Isländisch"
+
+#: src/libpspp/i18n.c:1155
+msgid "Japanese"
+msgstr "Japanisch"
+
+#: src/libpspp/i18n.c:1157
+msgid "Korean"
+msgstr "Koreanisch"
+
+#: src/libpspp/i18n.c:1159
+msgid "Nordic"
+msgstr "Nordisch"
+
+#: src/libpspp/i18n.c:1160
+msgid "Romanian"
+msgstr "Rumänisch"
+
+#: src/libpspp/i18n.c:1162
+msgid "South European"
+msgstr "Südeuropäisch"
+
+#: src/libpspp/i18n.c:1163
+msgid "Thai"
+msgstr "Thailändisch"
+
+#: src/libpspp/i18n.c:1165
+msgid "Turkish"
+msgstr "Türkisch"
+
+#: src/libpspp/i18n.c:1167
+msgid "Vietnamese"
+msgstr "Vietnamesisch"
+
+#: src/libpspp/i18n.c:1169
+msgid "Western European"
+msgstr "Westeuropäisch"
+
+#: src/libpspp/message.c:89
+#, c-format
+msgid "%s: %s"
+msgstr "%s: %s"
+
+#: src/libpspp/message.c:113
+msgid "error"
+msgstr "Fehler"
+
+#: src/libpspp/message.c:115
+msgid "warning"
+msgstr "Warnung"
+
+#: src/libpspp/message.c:118
+msgid "note"
+msgstr "Hinweis"
+
+#: src/libpspp/message.c:327
+#, c-format
+msgid "Notes (%d) exceed limit (%d). Suppressing further notes."
+msgstr "Anzahl der Meldungen (%d) hat die Grenze (%d) überschritten. Weitere Meldungen werden unterdrückt."
+
+#: src/libpspp/message.c:335
+#, c-format
+msgid "Warnings (%d) exceed limit (%d). Syntax processing will be halted."
+msgstr "Anzahl der Warnmeldungen (%d) hat die Grenze (%d) überschritten. Verarbeitung der Syntax wird angehalten."
+
+#: src/libpspp/message.c:338
+#, c-format
+msgid "Errors (%d) exceed limit (%d). Syntax processing will be halted."
+msgstr "Anzahl der Fehler (%d) hat die Grenze (%d) überschritten. Verarbeitung der Syntax wird angehalten."
+
+#: src/libpspp/zip-reader.c:202
+#, c-format
+msgid "%s: corrupt archive at 0x%llx: expected %#<PRIx32> but got %#<PRIx32>"
+msgstr "%s: Fehlerhafte Datei an der Stelle 0x%llx: erwartet %#<PRIx32>; gefunden %#<PRIx32>"
+
+#: src/libpspp/zip-reader.c:329 src/libpspp/zip-reader.c:449
+#, c-format
+msgid "%s: open failed (%s)"
+msgstr "%s: Öffnen ist fehlgeschlagen (%s)"
+
+#: src/libpspp/zip-reader.c:344
+#, c-format
+msgid "%s: cannot find central directory"
+msgstr "%s: Das Hauptverzeichnis konnte nicht gefunden werden"
+
+#: src/libpspp/zip-reader.c:353 src/libpspp/zip-reader.c:384
+#: src/libpspp/zip-reader.c:468
+#, c-format
+msgid "%s: seek failed (%s)"
+msgstr "%s: Suche ist fehlgeschlagen (%s)"
+
+#: src/libpspp/zip-reader.c:441
+#, c-format
+msgid "%s: unknown member \"%s\""
+msgstr "%s: unbekanntes Mitglied \"%s\""
+
+#: src/libpspp/zip-reader.c:503
+#, c-format
+msgid "%s: name mismatch between central directory (%s) and local file header (%s)"
+msgstr "%s: Unterschiedliche Namen im Hauptverzeichnis (%s) und im lokalen Dateikopf (%s)"
+
+#: src/libpspp/zip-reader.c:696
+#, c-format
+msgid "%s: cannot initialize inflator (%s)"
+msgstr "%s: Der Dekomprimierer konnte nicht initialisiert werden (%s)"
+
+#: src/libpspp/zip-reader.c:751
+#, c-format
+msgid "%s: error inflating \"%s\" (%s)"
+msgstr "%s: Fehler bei der Dekomprimierung \"%s\" (%s)"
+
+#: src/libpspp/zip-writer.c:97 utilities/pspp-convert.c:346
+#, c-format
+msgid "%s: error opening output file"
+msgstr "%s: Fehler beim Öffnen der Ausgabedatei"
+
+#: src/libpspp/zip-writer.c:169
+#, c-format
+msgid "%s: error seeking in output file"
+msgstr "%s: Fehler beim Durchsuchen der Ausgabedatei"
+
+#: src/libpspp/zip-writer.c:210
+msgid "error creating temporary file"
+msgstr "Fehler beim Lesen der temporären Datei"
+
+#: src/libpspp/zip-writer.c:279
+#, c-format
+msgid "%s: write failed"
+msgstr "%s: Schreiben ist fehlgeschlagen"
+
+#. TRANSLATORS: This is a format string which, when presented to
+#. printf like functions, will create a pango markup string to
+#. display real number in scientific notation.
+#.
+#. In its untranslated form, it will display similar to "1.23 x 10^4". You
+#. can leave it untranslated if this is how scientific notation is usually
+#. presented in your language.
+#.
+#. Some locales (such as German) prefer the centered dot rather than the
+#. multiplication sign between the mantissa an exponent. In which
+#. case, you can change "#215;" to "#8901;" or other unicode code
+#. point as appropriate.
+#.
+#. The . in this string does not and should not be changed, since
+#. that is taken care of by the stdc library.
+#.
+#. For information on Pango markup, see
+#. http://developer.gnome.org/pango/stable/PangoMarkupFormat.html
+#.
+#. For tables of unicode code points, see http://unicode.org/charts
+#.
+#: src/math/chart-geometry.c:123
+#, c-format
+msgid "%%.%dlf×10<sup>%d</sup>"
+msgstr "%%.%dlf×10<sup>%d</sup>"
+
+#: src/math/histogram.c:145
+msgid "Not creating histogram because the data contains less than 2 distinct values"
+msgstr "Ein Histogramm wird nicht erzeugt, weil die Daten weniger als 2 verschiedene Wertausprägungen enthalten."
+
+#: src/math/percentiles.c:36
+msgid "HAverage"
+msgstr "HAverage"
+
+#: src/math/percentiles.c:38
+msgid "Rounded"
+msgstr "Gerundet"
+
+#: src/math/percentiles.c:39
+msgid "Empirical"
+msgstr "Empirisch"
+
+#: src/math/percentiles.c:40
+msgid "Empirical with averaging"
+msgstr "Empirisch mit Durchschnittsbildung"
+
+#: src/math/shapiro-wilk.c:84
+msgid "One or more weight values are non-integer. Fractional parts will be ignored when calculating the Shapiro-Wilk statistic."
+msgstr "Einer oder mehrere Gewichtungsfaktoren sind keine Ganzzahl. Die Nachkommastellen werden bei der Berechnung der Shapiro-Wilk Statistik ignoriert."
+
+#: src/output/ascii.c:340
+#, c-format
+msgid "ascii: opening output file `%s'"
+msgstr "ASCII: die Ausgabedatei `%s' wird geöffnet"
+
+#: src/output/ascii.c:371
+#, c-format
+msgid "%s: %s must be positive integer or `auto'"
+msgstr "%s: %s muss eine positive ganze Zahl sein oder `auto'"
+
+#: src/output/ascii.c:393
+#, c-format
+msgid "ascii: page must be at least %d characters wide, but as configured is only %d characters"
+msgstr "ASCII: eine Seite muss mindestens %d Zeichen breit sein. Es sind aber nur %d Zeichen als Seitenbreite eingestellt"
+
+#: src/output/ascii.c:508
+#, c-format
+msgid "See %s for a chart."
+msgstr "Siehe Diagramm in der Datei %s."
+
+#: src/output/charts/piechart.c:54
+msgid "*MISSING*"
+msgstr "*FEHLEND*"
+
+#: src/output/csv.c:100 src/output/html.c:117 src/output/journal.c:166
+#: src/output/msglog.c:68
+#, c-format
+msgid "error opening output file `%s'"
+msgstr "Fehler beim Öffnen der Ausgabedatei `%s'"
+
+#: src/output/driver.c:522
+#, c-format
+msgid "%s is not a valid device type (the choices are `%s' and `%s')"
+msgstr "%s ist kein gültiger Gerätetyp (zur Auswahl stehen `%s' und `%s')"
+
+#: src/output/driver.c:536
+#, c-format
+msgid "%s: unknown option `%s'"
+msgstr "%s: unbekannte Option `%s'"
+
+#: src/output/driver.c:553
+#, c-format
+msgid "%s: output option missing `='"
+msgstr "%s: die Ausgabeoption `=' fehlt"
+
+#: src/output/driver.c:560
+#, c-format
+msgid "%s: output option specified more than once"
+msgstr "%s: die Ausgabeoption wurde mehr als einmal angegeben"
+
+#: src/output/html.c:129
+msgid "PSPP Output"
+msgstr "PSPP Ausgabe"
+
+#: src/output/html.c:266
+msgid "No description"
+msgstr "Keine Beschreibung"
+
+#: src/output/journal.c:69
+#, c-format
+msgid "error writing output file `%s'"
+msgstr "Fehler beim Schreiben der Ausgabedatei `%s'"
+
+#: src/output/measure.c:68
+#, c-format
+msgid "`%s' is not a valid length."
+msgstr "`%s' ist keine gültige Länge."
+
+#: src/output/measure.c:96
+#, c-format
+msgid "syntax error in paper size `%s'"
+msgstr "Syntaxfehler bei der Papiergröße `%s'"
+
+#: src/output/measure.c:233
+#, c-format
+msgid "unknown paper type `%.*s'"
+msgstr "Unbekannter Papiertyp `%.*s'"
+
+#: src/output/measure.c:251
+#, c-format
+msgid "error opening input file `%s'"
+msgstr "Fehler beim Öffnen der Eingabedatei `%s'"
+
+#: src/output/measure.c:279
+#, c-format
+msgid "file `%s' does not state a paper size"
+msgstr "Datei `%s' legt keine Papiergröße fest"
+
+#: src/output/options.c:112
+#, c-format
+msgid "%s: `%s' is `%s' but a Boolean value is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein Boolscher Wert erfoderlich"
+
+#: src/output/options.c:187
+#, c-format
+msgid "%s: `%s' is `%s' but one of the following is required: %s"
+msgstr "%s: `%s' ist `%s', es ist aber einer der folgenden erfoderlich: %s"
+
+#: src/output/options.c:231
+#, c-format
+msgid "%s: `%s' is `%s' but a non-negative integer is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein nicht-negativer, ganzzahliger Wert erfoderlich"
+
+#: src/output/options.c:235
+#, c-format
+msgid "%s: `%s' is `%s' but a positive integer is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein positiver, ganzzahliger Wert erfoderlich"
+
+#: src/output/options.c:238
+#, c-format
+msgid "%s: `%s' is `%s' but an integer is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein ganzzahliger Wert erfoderlich"
+
+#: src/output/options.c:241
+#, c-format
+msgid "%s: `%s' is `%s' but an integer greater than %d is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein ganzzahliger Wert größer als %d erfoderlich"
+
+#: src/output/options.c:246
+#, c-format
+msgid "%s: `%s' is `%s' but an integer between %d and %d is required"
+msgstr "%s: `%s' ist `%s', es ist aber ein ganzzahliger Wert zwischen %d und %d erfoderlich"
+
+#: src/output/options.c:325
+#, c-format
+msgid "%s: `%s' is `%s' but a file name that contains `#' is required."
+msgstr "%s: `%s' ist `%s', es ist aber ein Dateiname mit `#' erforderlich."
+
+#. TRANSLATORS: Do not translate this string. If the script of your language
+#. reads from right to left (eg Persian, Arabic, Hebrew etc), then replace
+#. this string with "output-direction-rtl". Otherwise either leave it
+#. untranslated or copy it verbatim.
+#: src/output/render.c:994
+msgid "output-direction-ltr"
+msgstr "output-direction-ltr"
+
+#: src/output/text-item.c:44
+msgid "Page Title"
+msgstr "Seitentitel"
+
+#: src/output/text-item.c:47
+msgid "Title"
+msgstr "Titel"
+
+#: src/output/text-item.c:51
+msgid "Log"
+msgstr "Log"
+
+#: src/output/text-item.c:54
+msgid "Page Break"
+msgstr "Seitenumbruch"
+
+#: src/output/cairo.c:520
+#, c-format
+msgid "`%s': bad font specification"
+msgstr "`%s': falsche Angabe der Schriftart"
+
+#: src/output/cairo.c:744
+#, c-format
+msgid "The defined page is not wide enough to hold at least %d characters in the default font. In fact, there's only room for %d characters."
+msgstr "Das angegebene Seitenformat ist nicht groß genug, um in der Standardschriftart mindestens %d Zeichen darzustellen. Tatsächlich passen nur %d Zeichen auf eine Seite."
+
+#: src/output/cairo.c:752
+#, c-format
+msgid "The defined page is not long enough to hold at least %d lines in the default font. In fact, there's only room for %d lines."
+msgstr "Das angegebene Seitenformat ist nicht groß genug um in der Standardschriftart mindestens %d Zeilen darzustellen. Tatsächlich passen nur %d Zeilen auf eine Seite."
+
+#: src/output/cairo.c:837
+#, c-format
+msgid "error opening output file `%s': %s"
+msgstr "Fehler beim Öffnen der Ausgabedatei `%s': %s"
+
+#: src/output/cairo.c:892
+#, c-format
+msgid "error drawing output for %s driver: %s"
+msgstr "Fehler beim Zeichnen der Ausgabe für den Treiber %s: %s"
+
+#: src/output/cairo.c:2056
+#, c-format
+msgid "error writing output file `%s': %s"
+msgstr "Fehler beim Schreiben der Ausgabedatei `%s': %s"
+
+#: src/output/charts/np-plot-cairo.c:37
+#, c-format
+msgid "Normal Q-Q Plot of %s"
+msgstr "Normalitäts Q-Q-Plot für %s"
+
+#: src/output/charts/np-plot-cairo.c:38 src/output/charts/np-plot-cairo.c:68
+msgid "Observed Value"
+msgstr "Beobachteter Wert"
+
+#: src/output/charts/np-plot-cairo.c:39
+msgid "Expected Normal"
+msgstr "Erwartete Normale"
+
+#: src/output/charts/np-plot-cairo.c:67
+#, c-format
+msgid "Detrended Normal Q-Q Plot of %s"
+msgstr "Trendbereinigter Normalitäts Q-Q-Plot für %s"
+
+#: src/output/charts/np-plot-cairo.c:69
+msgid "Dev from Normal"
+msgstr "Abweichung von der Normalverteilung"
+
+#: src/output/charts/barchart-cairo.c:65
+msgid "Bar Chart"
+msgstr "Balkendiagramm"
+
+#: src/output/charts/plot-hist-cairo.c:43
+#, c-format
+msgid "N = %.2f"
+msgstr "N = %.2f"
+
+#: src/output/charts/plot-hist-cairo.c:52
+#, c-format
+msgid "Mean = %.1f"
+msgstr "Mittelwert = %.1f"
+
+#: src/output/charts/plot-hist-cairo.c:61
+#, c-format
+msgid "Std. Dev = %.2f"
+msgstr "Std.-Abw. = %.2f"
+
+#: src/output/charts/plot-hist-cairo.c:110
+msgid "HISTOGRAM"
+msgstr "HISTOGRAMM"
+
+#: src/output/charts/roc-chart-cairo.c:36 src/ui/gui/roc.ui:24
+msgid "ROC Curve"
+msgstr "ROC-Kurve"
+
+#: src/output/charts/scree-cairo.c:36
+msgid "Scree Plot"
+msgstr "Scree-Plot"
+
+#: src/output/charts/scree-cairo.c:38
+msgid "Eigenvalue"
+msgstr "Eigenwert"
+
+#: src/output/charts/spreadlevel-cairo.c:37
+#, c-format
+msgid "Spread vs. Level Plot of %s"
+msgstr "Streubreite gegen mittleres Niveau Diagramm von %s"
+
+#: src/output/charts/spreadlevel-cairo.c:38
+msgid "Level"
+msgstr "mittleres Niveau"
+
+#: src/output/charts/spreadlevel-cairo.c:39
+msgid "Spread"
+msgstr "Streubreite"
+
+#: src/output/charts/scatterplot-cairo.c:57
+#, c-format
+msgid "Scatterplot %s"
+msgstr "Scatterplot %s"
+
+#: src/output/spv/spv-legacy-decoder.c:2222
+msgid "Table lacks cell data."
+msgstr "Die Tabelle enthält keine Zelldaten"
+
+#: src/output/spv/spv-writer.c:68
+#, c-format
+msgid "%s: create failed"
+msgstr "%s: Schreiben ist fehlgeschlagen"
+
+#: src/output/spv/spv-writer.c:89
+msgid "I/O error writing SPV file"
+msgstr "Fehler beim Schreiben der SPV Datei"
+
+#: src/output/spv/spv.c:693
+#, c-format
+msgid "%s: Failed to create XML parser"
+msgstr "%s: Fehler beim Initialisieren der XML Verarbeitung"
+
+#: src/output/spv/spv.c:718
+#, c-format
+msgid "%s: document is not well-formed"
+msgstr "%s: Dokument ist nicht richtig formatiert"
+
+#: src/output/spv/spv.c:726
+#, c-format
+msgid "%s: root node is \"%s\" but \"%s\" was expected"
+msgstr "%s: Wurzelknoten ist \"%s\" aber \"%s\" wurde erwartet"
+
+#: src/ui/gui/psppire-acr.c:273
+msgid "Add"
+msgstr "Hinzufügen"
+
+#: src/ui/gui/psppire-acr.c:274
+msgid "Edit"
+msgstr "Bearbeiten"
+
+#: src/ui/gui/psppire-acr.c:275
+msgid "Remove"
+msgstr "Löschen"
+
+#: src/ui/gui/psppire-buttonbox.c:311
+msgid "OK"
+msgstr "OK"
+
+#: src/ui/gui/psppire-buttonbox.c:319
+msgid "Go To"
+msgstr "Gehe zu"
+
+#: src/ui/gui/psppire-buttonbox.c:327
+msgid "Continue"
+msgstr "Weiter"
+
+#: src/ui/gui/psppire-buttonbox.c:339
+#: src/ui/gui/psppire-import-assistant.c:759
+msgid "Paste"
+msgstr "Einfügen"
+
+#: src/ui/gui/psppire-buttonbox.c:345
+#: src/ui/gui/psppire-dialog-action-aggregate.c:216
+#: src/ui/gui/psppire-data-window.c:496 src/ui/gui/psppire-data-window.c:624
+#: src/ui/gui/psppire-output-window.c:353
+#: src/ui/gui/psppire-syntax-window.c:594 src/ui/gui/psppire-window.c:445
+#: src/ui/gui/psppire-window.c:628
+msgid "Cancel"
+msgstr "Abbrechen"
+
+#: src/ui/gui/psppire-buttonbox.c:351
+msgid "Close"
+msgstr "Schließen"
+
+#: src/ui/gui/psppire-buttonbox.c:358
+#: src/ui/gui/psppire-import-assistant.c:760
+msgid "Reset"
+msgstr "Zurücksetzen"
+
+#: src/ui/gui/psppire-buttonbox.c:365
+msgid "Help"
+msgstr "Hilfe"
+
+#: src/ui/gui/psppire-dialog-action-aggregate.c:213
+msgid "Aggregate destination file"
+msgstr "Zusammenführende Zieldatei"
+
+#: src/ui/gui/psppire-dialog-action-aggregate.c:217
+#: src/ui/gui/psppire-data-window.c:493 src/ui/gui/psppire-data-window.c:497
+#: src/ui/gui/psppire-output-window.c:354
+#: src/ui/gui/psppire-syntax-window.c:595 src/ui/gui/psppire-window.c:449
+#: src/ui/gui/aggregate.ui:565
+msgid "Save"
+msgstr "Speichern"
+
+#: src/ui/gui/psppire-dialog-action-aggregate.c:226
+#: src/ui/gui/psppire-data-window.c:503
+msgid "System Files (*.sav)"
+msgstr "PSPP Systemdateien (*.sav)"
+
+#: src/ui/gui/psppire-dialog-action-aggregate.c:231
+#: src/ui/gui/psppire-data-window.c:508
+msgid "Compressed System Files (*.zsav)"
+msgstr "Komprimierte PSPP Systemdateien (*.zsav)"
+
+#: src/ui/gui/psppire-dialog-action-aggregate.c:236
+#: src/ui/gui/psppire-data-window.c:513 src/ui/gui/psppire-window.c:652
+msgid "Portable Files (*.por) "
+msgstr "Portable Dateien (*.por) "
+
+#: src/ui/gui/psppire-dialog-action-autorecode.c:337
+#: src/ui/gui/psppire-dialog-action-recode.c:535
+#: src/ui/gui/psppire-dialog-action-recode-different.c:288
+msgid "New"
+msgstr "Neu"
+
+#: src/ui/gui/psppire-dialog-action-autorecode.c:351
+#: src/ui/gui/psppire-dialog-action-recode.c:527
+#: src/ui/gui/psppire-dialog-action-recode-different.c:301
+msgid "Old"
+msgstr "Alt"
+
+#: src/ui/gui/psppire-dialog-action-comments.c:142
+#, c-format
+msgid "Column Number: %d"
+msgstr "Spaltennummer: %d"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:71
+msgid "Chisq"
+msgstr "Chi-Quadrat"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:71
+msgid "Pearson chi-square, likelihood ratio, Fisher’s exact test, continuity correction, linear-by-linear association."
+msgstr "Pearson Chi-Quadrat, Likelihood Quotient, exakter Test nach Fischer, Stetigkeitskorrektur, Zusammenhangstest linear mit linear"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:74
+#: src/language/stats/crosstabs.q:1334
+msgid "Phi"
+msgstr "Phi"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:75
+msgid "CC"
+msgstr "Kontingenzkoeffizient C"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:75
+msgid "Contingency coefficient"
+msgstr "Kontingenzkoeffizient"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:77
+msgid "UC"
+msgstr "Unsicherheitskoeffizient"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:77
+msgid "Uncertainty coefficient"
+msgstr "Unsicherheitskoeffizient"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:78
+msgid "BTau"
+msgstr "Tau-b"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:78
+msgid "Kendall's Tau-b"
+msgstr "Kendall's Tau-b"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:79
+msgid "CTau"
+msgstr "Tau-c"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:79
+msgid "Kendall's Tau-c"
+msgstr "Kendall's Tau-c"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:80
+msgid "Risk"
+msgstr "Risikoschätzung"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:80
+msgid "Relative Risk estimate"
+msgstr "Relative Risikoschätzung"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:81
+#: src/language/stats/crosstabs.q:1338
+msgid "Gamma"
+msgstr "Gamma"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:82
+msgid "D"
+msgstr "Somers-d"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:82
+msgid "Somer's d"
+msgstr "Somer's d"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:83
+#: src/language/stats/crosstabs.q:1344
+msgid "Kappa"
+msgstr "Kappa"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:83
+msgid "Cohen's Kappa"
+msgstr "Cohen´s Kappa"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:84
+#: src/language/stats/crosstabs.q:1429
+msgid "Eta"
+msgstr "Eta"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:85
+msgid "Corr"
+msgstr "Korr"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:85
+msgid "Spearman correlation, Pearson's r"
+msgstr "Spearman Korrelation, Pearson's r"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:90
+msgid "Frequency Count"
+msgstr "Häufigkeit"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:91
+msgid "Row"
+msgstr "Zeile"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:91
+msgid "Row percent"
+msgstr "Zeile Prozent"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:92
+msgid "Column"
+msgstr "Spalte"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:92
+msgid "Column percent"
+msgstr "Spalte Prozent"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:93
+msgid "Total percent"
+msgstr "Summe Prozent"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:94
+#: src/language/stats/crosstabs.q:1266
+msgid "Expected"
+msgstr "Erwartet"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:94
+msgid "Expected value"
+msgstr "Erwarteter Wert"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:96
+#: src/language/stats/crosstabs.q:1268
+msgid "Std. Residual"
+msgstr "Std. Residuum"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:96
+msgid "Standardized Residual"
+msgstr "Standardisiertes Residuum"
+
+#: src/ui/gui/psppire-dialog-action-crosstabs.c:97
+msgid "Adjusted Std. Residual"
+msgstr "Korrigiertes standardisiertes Residuum"
+
+#: src/ui/gui/psppire-dialog-action-descriptives.c:45
+msgid "Standard error"
+msgstr "Standardfehler"
+
+#: src/ui/gui/psppire-dialog-action-descriptives.c:45
+msgid "Standard error of mean"
+msgstr "Standardfehler des Mittelwerts"
+
+#: src/ui/gui/psppire-dialog-action-descriptives.c:47
+msgid "Kurtosis and standard error of kurtosis"
+msgstr "Kurtosis und Standardfehler der Kurtosis"
+
+#: src/ui/gui/psppire-dialog-action-descriptives.c:48
+msgid "Skewness and standard error of skewness"
+msgstr "Schiefe und Standardfehler der Schiefe"
+
+#: src/ui/gui/psppire-dialog-action-factor.c:323
+#, c-format
+msgid "_Eigenvalues over %4.2f times the mean eigenvalue"
+msgstr "_Eigenwerte über dem %4.2f fachen des mittleren Eigenwertes"
+
+#: src/ui/gui/psppire-dialog-action-frequencies.c:44
+msgid "Standard error of the mean"
+msgstr "Standardfehler des Mittelwerts"
+
+#: src/ui/gui/psppire-dialog-action-frequencies.c:47
+msgid "Standard error of the skewness"
+msgstr "Standardfehler der Schiefe"
+
+#: src/ui/gui/psppire-dialog-action-frequencies.c:51
+msgid "Standard error of the kurtosis"
+msgstr "Standardfehler der Kurtosis"
+
+#: src/ui/gui/psppire-dialog-action-oneway.c:175
+#, c-format
+msgid "Contrast %d of %d"
+msgstr "Kontraste %d von %d"
+
+#: src/ui/gui/psppire-dialog-action-paired.c:162 src/ui/gui/examine.ui:282
+#: src/ui/gui/indep-samples.ui:334 src/ui/gui/t-test.ui:296
+msgid "O_ptions..."
+msgstr "_Optionen..."
+
+#: src/ui/gui/psppire-dialog-action-paired.c:168
+msgid "Paired Samples T Test"
+msgstr "T-Test bei gepaarten Stichproben"
+
+#: src/ui/gui/psppire-dialog-action-recode-different.c:327
+msgid "Recode into Different Variables"
+msgstr "Umkodieren in andere Variable"
+
+#: src/ui/gui/psppire-dialog-action-recode-different.c:330
+msgid "Recode into Different Variables: Old and New Values "
+msgstr "Umkodieren in andere Variable: Alte und neue Werte"
+
+#: src/ui/gui/psppire-dialog-action-recode-same.c:108 src/ui/gui/recode.ui:391
+msgid "Recode into Same Variables"
+msgstr "Umkodieren in dieselbe Variable "
+
+#: src/ui/gui/psppire-dialog-action-recode-same.c:114
+msgid "Recode into Same Variables: Old and New Values"
+msgstr "Umkodieren in dieselbe Variable: Alte und neue Werte"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:40
+msgid "Coeff"
+msgstr "Modellkoeffizienten"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:40
+msgid "Show the regression coefficients"
+msgstr "Zeige die Regressionskoeffizienten"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:41
+msgid "Conf. Interval"
+msgstr "Konfidenzintervall"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:41
+msgid "Show the confidence interval for the regression coefficients"
+msgstr "Zeige das Konfidenzintervall der Regressionskoeffizienten"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:42
+msgid "Show the correlation between observed and predicted values"
+msgstr "Zeige die Korrelation zwischen beobachteten und vorhergesagten Werten"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:43
+msgid "Anova"
+msgstr "ANOVA "
+
+#: src/ui/gui/psppire-dialog-action-regression.c:43
+msgid "Show the analysis of variance table"
+msgstr "Zeige die ANOVA Ergebnisse"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:44
+msgid "Bcov"
+msgstr "Bcov"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:44
+msgid "Show the variance coefficient matrix"
+msgstr "Zeige die Matrix der Varianzkoeffizienten"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:45
+msgid "Tol"
+msgstr "Tol"
+
+#: src/ui/gui/psppire-dialog-action-regression.c:45
+msgid "Show the variance inflation factor and its reciprocal"
+msgstr "Zeige den Varianzinflationsfaktor und seinen Kehrwert"
+
+#: src/ui/gui/psppire-dialog-action-select.c:88
+#, c-format
+msgid "Approximately %3d%% of all cases."
+msgstr "Ungefähr %3d%% der Fälle."
+
+#: src/ui/gui/psppire-dialog-action-select.c:89
+#, c-format
+msgid "Exactly %3d cases from the first %3d cases."
+msgstr "Exakt %3d Fälle von den ersten %3d Fällen."
+
+#: src/ui/gui/psppire-dialog-action-select.c:236
+#, c-format
+msgid "%d thru %d"
+msgstr "%d bis %d"
+
+#: src/ui/gui/psppire-dialog-action-two-sample.c:180
+#: src/ui/gui/k-independent.ui:404 src/ui/gui/k-related.ui:197
+msgid "Test Type"
+msgstr "Testtyp"
+
+#: src/ui/gui/psppire-dialog-action-two-sample.c:189
+msgid "_Wilcoxon"
+msgstr "_Wilcoxon"
+
+#: src/ui/gui/psppire-dialog-action-two-sample.c:190
+msgid "_Sign"
+msgstr "_Sign"
+
+#: src/ui/gui/psppire-dialog-action-two-sample.c:191
+msgid "_McNemar"
+msgstr "_McNemar"
+
+#: src/ui/gui/psppire-dialog-action-two-sample.c:209
+msgid "Two-Related-Samples Tests"
+msgstr "Tests für zwei verbundene Stichproben"
+
+#: src/ui/gui/psppire-dialog-action-weight.c:74 src/ui/gui/weight.ui:83
+#: src/ui/gui/weight.ui:211
+msgid "Do not weight cases"
+msgstr "Fälle nicht gewichten"
+
+#: src/ui/gui/psppire-dialog-action-weight.c:80
+#, c-format
+msgid "Weight cases by %s"
+msgstr "Fälle gewichten mit %s"
+
+#: src/ui/gui/psppire-dict.c:95
+msgid "Var"
+msgstr "Var"
+
+#. TRANSLATORS: This string must be a valid variable name. That means:
+#. - The string must be at most 64 bytes (not characters) long.
+#. - The string may not contain whitespace.
+#. - The first character may not be '$'
+#. - The first character may not be a digit
+#. - The final character may not be '.' or '_'
+#.
+#: src/ui/gui/psppire-dict.c:385
+#, c-format
+msgid "Var%04d"
+msgstr "Var%04d"
+
+#: src/ui/gui/psppire-dict.c:566
+msgid "Duplicate variable name."
+msgstr "Doppelter Variablenname."
+
+#: src/ui/gui/psppire-dictview.c:617
+msgid "Prefer variable labels"
+msgstr "Variablenlabel verwenden"
+
+#: src/ui/gui/psppire-dictview.c:631
+msgid "Default sort order"
+msgstr "Voreingestellte Sortierung"
+
+#: src/ui/gui/psppire-dictview.c:637
+msgid "Unsorted (dictionary order)"
+msgstr "Unsortiert (Codebuch)"
+
+#: src/ui/gui/psppire-dictview.c:642
+msgid "Sort by name"
+msgstr "Sortieren nach Name"
+
+#: src/ui/gui/psppire-dictview.c:647
+msgid "Sort by label"
+msgstr "Sortieren nach Label"
+
+#: src/ui/gui/psppire-means-layer.c:95
+#, c-format
+msgid "Layer %d of %d"
+msgstr "Schicht %d von %d"
+
+#: src/ui/gui/psppire-means-layer.c:169
+msgid "Forward"
+msgstr "Weiter"
+
+#: src/ui/gui/psppire-means-layer.c:170
+msgid "Back"
+msgstr "Zurück"
+
+#: src/ui/gui/psppire-text-file.c:55
+#, c-format
+msgid "Could not open `%s'"
+msgstr "`%s' konnte nicht geöffnet werden"
+
+#: src/ui/gui/psppire-text-file.c:71
+#, c-format
+msgid "Error reading `%s': %s"
+msgstr "Fehler beim Lesen von `%s': %s"
+
+#: src/ui/gui/psppire-text-file.c:74
+#, c-format
+msgid "Failed to read `%s', because it contains a line over %d bytes long and therefore appears not to be a text file."
+msgstr "Fehler beim Einlesen der Datei `%s', weil sie eine Zeile enthält, die über %d Bytes lang ist. Dies deutet darauf hin, dass es sich nicht um eine Textdatei handelt. "
+
+#: src/ui/gui/psppire-text-file.c:96
+#, c-format
+msgid "`%s' is empty."
+msgstr "`%s' ist leer."
+
+#: src/ui/gui/psppire-val-chooser.c:255
+msgid "through"
+msgstr "bis"
+
+#: src/ui/gui/psppire-val-chooser.c:288
+msgid "_Value:"
+msgstr "W_ert:"
+
+#: src/ui/gui/psppire-val-chooser.c:289
+msgid "_System Missing"
+msgstr "Systemde_finiert fehlend"
+
+#: src/ui/gui/psppire-val-chooser.c:290
+msgid "System _or User Missing"
+msgstr "System- _oder benutzerdefinierte fehlende Werte"
+
+#: src/ui/gui/psppire-val-chooser.c:291
+msgid "_Range:"
+msgstr "Bereich:"
+
+#: src/ui/gui/psppire-val-chooser.c:292
+msgid "Range, _LOWEST thru value"
+msgstr "Bereich, _KLEINSTER bis Wert"
+
+#: src/ui/gui/psppire-val-chooser.c:293
+msgid "Range, value thru _HIGHEST"
+msgstr "Bereic_h, Wert bis GRÖSSTER"
+
+#: src/ui/gui/psppire-val-chooser.c:294
+msgid "_All other values"
+msgstr "A_lle anderen Werte"
+
+#: src/ui/gui/psppire-var-view.c:153
+#, c-format
+msgid "Var%d"
+msgstr "Variable%d"
+
+#: src/ui/source-init-opts.c:72
+#, c-format
+msgid "Algorithm must be either `%s' or `%s'."
+msgstr "Algorithmus muss entweder `%s' oder `%s' sein."
+
+#: src/ui/source-init-opts.c:97
+#, c-format
+msgid "Syntax must be either `%s' or `%s'."
+msgstr "Syntax mus entweder `%s' oder `%s' sein."
+
+#: src/ui/terminal/main.c:144
+msgid "Error encountered while ERROR=STOP is effective."
+msgstr "Ein Fehler wurde gefunden während ERROR = STOP aktiviert war."
+
+#: src/ui/terminal/main.c:150
+msgid "Stopping syntax file processing here to avoid a cascade of dependent command failures."
+msgstr "Die Ausführung der Syntaxdatei wird hier abgebrochen, um zu verhindern, dass eine Kaskade von fehlgeschlagenen Befehlen entsteht."
+
+#: src/ui/terminal/terminal-opts.c:147
+#, c-format
+msgid ""
+"PSPP, a program for statistical analysis of sampled data.\n"
+"Usage: %s [OPTION]... FILE...\n"
+"\n"
+"Arguments to long options also apply to equivalent short options.\n"
+"\n"
+"Output options:\n"
+" -o, --output=FILE output to FILE, default format from FILE's name\n"
+" -O format=FORMAT override format for previous -o\n"
+" -O OPTION=VALUE set output option to customize previous -o\n"
+" -O device={terminal|listing} override device type for previous -o\n"
+" -e, --error-file=FILE append errors, warnings, and notes to FILE\n"
+" --no-output disable default output driver\n"
+"Supported output formats: %s\n"
+"\n"
+"Language options:\n"
+" -I, --include=DIR append DIR to search path\n"
+" -I-, --no-include clear search path\n"
+" -r, --no-statrc disable running rc file at startup\n"
+" -a, --algorithm={compatible|enhanced}\n"
+" set to `compatible' if you want output\n"
+" calculated from broken algorithms\n"
+" -x, --syntax={compatible|enhanced}\n"
+" set to `compatible' to disable PSPP extensions\n"
+" -b, --batch interpret syntax in batch mode\n"
+" -i, --interactive interpret syntax in interactive mode\n"
+" --syntax-encoding=ENCODING specify encoding for syntax files\n"
+" -s, --safer don't allow some unsafe operations\n"
+"Default search path: %s\n"
+"\n"
+"Informative output:\n"
+" -h, --help display this help and exit\n"
+" -V, --version output version information and exit\n"
+"\n"
+"Non-option arguments are interpreted as syntax files to execute.\n"
+msgstr ""
+"PSPP, ein Programm zur statistischen Analyse von Stichproben.\n"
+"Befehl: %s [OPTIONEN]... DATEI...\n"
+"\n"
+"Die gezeigten Argumente für die Langform der Optionen finden auch in der entsprechenden Kurzform der Optionen Anwendung.\n"
+"\n"
+"Ausgabeoptionen:\n"
+" -o, --output=DATEI Ausgabe in DATEI, Voreinstellung des Dateiformats aus dem Dateinamen\n"
+" -O format=FORMAT überschreibt das Format aus der vorhergehenden Option -o\n"
+" -O OPTION=WERT setzt die Ausgabeoption um die vorhergehende Option -o anzupassen\n"
+" -O device={terminal|listing} überschreibt den Gerätetyp der vorhergehenden Option -o\n"
+" -e, --error-file=DATEI Fehler, Warnungen und Mitteilungen werden an DATEI angehängt\n"
+" --no-output das voreingerstellte Ausgabegerät wird ausser Kraft gesetzt\n"
+"Unterstützte Ausgabeformate: %s\n"
+"\n"
+"Sprachoptionen:\n"
+" -I, --include=VERZEICHNIS füge das VERZEICHNIS dem Suchpfad hinzu\n"
+" -I-, --no-include Löschung des Suchpfads\n"
+" -r, --no-statrc Ausführung der rc-Datei beim Start wird deaktiviert\n"
+" -a, --algorithm={compatible|enhanced}\n"
+" auf `compatible' setzen, um auch von fehlerhaften\n"
+" Algorithmen Ausgaben erzeugen zu lassen\n"
+" -x, --syntax={compatible|enhanced}\n"
+" auf `compatible' setzen, um PSPP-Erweiterungen auszuschalten\n"
+" -b, --batch interpretiere die Syntax im Batch-Modus\n"
+" -i, --interactive interpretiere die Syntax im interaktiven Modus\n"
+" --syntax-encoding=KODIERUNG legt die Kodierung der Syntaxdatei fest\n"
+" -s, --safer unterbindet unsichere Operationen\n"
+"Voreigestellter Suchpfad: %s\n"
+"\n"
+"Information:\n"
+" -h, --help Anzeige dieses Hilfetextes\n"
+" -V, --version Anzeige der Versionsinformationen\n"
+"\n"
+"Argumente ohne Optionen werden als Syntaxdateien interpretiert und ausgeführt.\n"
+
+#: src/ui/gui/find-dialog.c:197
+msgid "Find"
+msgstr "Suchen"
+
+#: src/ui/gui/find-dialog.c:662
+#, c-format
+msgid "Bad regular expression: %s"
+msgstr "Ungültiger regulärer Ausdruck: %s"
+
+#: src/ui/gui/help-menu.c:70
+msgid "A program for the analysis of sampled data"
+msgstr "Eine Software zur Analyse von statistischen Daten"
+
+#. TRANSLATORS: Do not translate this string. Instead, put the names of the people
+#. who have helped in the translation.
+#: src/ui/gui/help-menu.c:80
+msgid "translator-credits"
+msgstr ""
+"Matthias Keil\n"
+"Olaf Nöhring\n"
+"Bob Earl"
+
+#: src/ui/gui/help-menu.c:170
+#, c-format
+msgid "Help path conversion error: %s"
+msgstr "Fehler bei der Konvertierung des Hilfe-Pfades: %s"
+
+#: src/ui/gui/help-menu.c:197
+#, c-format
+msgid "Cannot open via html: %s with uri: %s The PSSP manual is also available at %s"
+msgstr "Das Handbuch kann nicht als html geöffnet werden: %s mit URI: %s . Das PSPP Benutzerhandbuch ist auch unter %s verfügbar"
+
+#: src/ui/gui/help-menu.c:218
+msgid "_Help"
+msgstr "_Hilfe"
+
+#: src/ui/gui/help-menu.c:221
+msgid "_About"
+msgstr "_Über"
+
+#: src/ui/gui/help-menu.c:222
+msgid "_Reference Manual"
+msgstr "_Handbuch inkl. Befehlsreferenz"
+
+#: src/ui/gui/main.c:306
+msgid "Show version information and exit"
+msgstr "Zeige die Versionsinformation und beende die Anwendung"
+
+#: src/ui/gui/main.c:409
+msgid "Do not display the splash screen"
+msgstr "Zeige den Startbildschirm nicht an"
+
+#: src/ui/gui/main.c:411
+msgid "Do not attempt single instance negotiation"
+msgstr "Versuche keine Aushandlung einer Single Instance"
+
+#: src/ui/gui/missing-val-dialog.c:217
+msgid "The maximum length of a missing value for a string variable is 8 in UTF-8."
+msgstr "Die maximale Länge eines fehlenden Wertes für eine String-Variable beträgt 8 in UTF-8."
+
+#: src/ui/gui/missing-val-dialog.c:268
+msgid "At least one value must be specified"
+msgstr "Es muss mindestens ein Wert angegeben werden."
+
+#: src/ui/gui/missing-val-dialog.c:298
+msgid "Incorrect range specification"
+msgstr "Ungültige Bereichsspezifikation"
+
+#: src/ui/gui/psppire-data-editor.c:380
+#, c-format
+msgid "%d : %s"
+msgstr "%d: %s"
+
+#: src/ui/gui/psppire-data-editor.c:391
+#, c-format
+msgid "%'d case"
+msgid_plural "%'d cases"
+msgstr[0] "%'d Fall"
+msgstr[1] "%'d Fälle"
+
+#: src/ui/gui/psppire-data-editor.c:396
+#, c-format
+msgid "%'d variable"
+msgid_plural "%'d variables"
+msgstr[0] "%'d Variable"
+msgstr[1] "%'d Variablen"
+
+#: src/ui/gui/psppire-data-editor.c:485
+msgid "Case"
+msgstr "Fall"
+
+#: src/ui/gui/psppire-data-editor.c:495
+msgid "Data View"
+msgstr "Datenansicht"
+
+#: src/ui/gui/psppire-data-editor.c:505
+msgid "Variable View"
+msgstr "Variablenansicht"
+
+#: src/ui/gui/psppire-data-sheet.c:171 src/ui/gui/psppire-data-window.c:1338
+msgid "_Insert Case"
+msgstr "_Fall einfügen"
+
+#: src/ui/gui/psppire-data-sheet.c:179 src/ui/gui/psppire-data-window.c:1391
+msgid "Cl_ear Cases"
+msgstr "Fälle lös_chen"
+
+#: src/ui/gui/psppire-data-sheet.c:305 src/ui/gui/psppire-data-window.c:1337
+#: src/ui/gui/psppire-variable-sheet.c:274
+msgid "_Insert Variable"
+msgstr "Variable _einfügen"
+
+#: src/ui/gui/psppire-data-sheet.c:314 src/ui/gui/psppire-variable-sheet.c:283
+msgid "Cl_ear Variables"
+msgstr "Variabl_e löschen"
+
+#: src/ui/gui/psppire-data-sheet.c:326
+msgid "Sort _Ascending"
+msgstr "_Aufsteigend"
+
+#: src/ui/gui/psppire-data-sheet.c:333
+msgid "Sort _Descending"
+msgstr "A_bsteigend"
+
+#: src/ui/gui/psppire-data-window.c:175
+msgid "Transformations Pending"
+msgstr "Offene Transformationen werden ausgeführt"
+
+#: src/ui/gui/psppire-data-window.c:191
+msgid "Filter off"
+msgstr "Keine Auswahl"
+
+#: src/ui/gui/psppire-data-window.c:203
+#, c-format
+msgid "Filter by %s"
+msgstr "Ausgewählt nach %s"
+
+#: src/ui/gui/psppire-data-window.c:224
+msgid "No Split"
+msgstr "Keine Aufteilung"
+
+#: src/ui/gui/psppire-data-window.c:233
+msgid "Split by "
+msgstr "Aufgeteilt nach"
+
+#: src/ui/gui/psppire-data-window.c:261
+msgid "Weights off"
+msgstr "Keine Gewichtung"
+
+#: src/ui/gui/psppire-data-window.c:273
+#, c-format
+msgid "Weight by %s"
+msgstr "Gewichtet nach %s"
+
+#: src/ui/gui/psppire-data-window.c:518
+#: src/ui/gui/psppire-import-assistant.c:681
+#: src/ui/gui/psppire-syntax-window.c:607 src/ui/gui/psppire-window.c:669
+msgid "All Files"
+msgstr "Alle Dateien"
+
+#: src/ui/gui/psppire-data-window.c:535
+msgid "System File"
+msgstr "PSPP Systemdatei"
+
+#: src/ui/gui/psppire-data-window.c:542
+msgid "Compressed System File"
+msgstr "Komprimierte PSPP Systemdatei"
+
+#: src/ui/gui/psppire-data-window.c:548
+msgid "Portable File"
+msgstr "Portable Datei"
+
+#: src/ui/gui/psppire-data-window.c:551
+msgid "Format:"
+msgstr "Format:"
+
+#: src/ui/gui/psppire-data-window.c:615
+msgid "Delete Existing Dataset?"
+msgstr "Vorhandenes Datenblatt löschen?"
+
+#: src/ui/gui/psppire-data-window.c:619
+#, c-format
+msgid "Renaming \"%s\" to \"%s\" will destroy the existing dataset named \"%s\". Are you sure that you want to do this?"
+msgstr "Umbenennen von \"%s\" nach \"%s\" löscht das vorhandene Datenblatt \"%s\". Sind Sie sicher, dass Sie das tun wollen?"
+
+#: src/ui/gui/psppire-data-window.c:625
+msgid "Delete"
+msgstr "Löschen"
+
+#: src/ui/gui/psppire-data-window.c:647
+#, c-format
+msgid "Please enter a new name for dataset \"%s\":"
+msgstr "Geben sie einen neuen Namen für das Datenblatt \"%s\" ein:"
+
+#: src/ui/gui/psppire-data-window.c:649
+msgid "Rename Dataset"
+msgstr "Datenblatt umbenennen"
+
+#: src/ui/gui/psppire-data-window.c:1199 src/ui/gui/output-window.ui:68
+#: src/ui/gui/syntax-editor.ui:22
+msgid "_File"
+msgstr "_Datei"
+
+#: src/ui/gui/psppire-data-window.c:1203 src/ui/gui/syntax-editor.ui:25
+msgid "_New"
+msgstr "_Neu"
+
+#: src/ui/gui/psppire-data-window.c:1210
+msgid "_Syntax"
+msgstr "_Syntax"
+
+#: src/ui/gui/psppire-data-window.c:1213 src/ui/gui/data-editor.ui:177
+#: src/ui/gui/data-editor.ui:189
+msgid "_Data"
+msgstr "_Daten"
+
+#: src/ui/gui/psppire-data-window.c:1220 src/ui/gui/syntax-editor.ui:36
+msgid "_Open"
+msgstr "_Öffnen"
+
+#: src/ui/gui/psppire-data-window.c:1223
+msgid "_Import Data..."
+msgstr "Daten _importieren..."
+
+#: src/ui/gui/psppire-data-window.c:1231 src/ui/gui/logistic.ui:261
+#: src/ui/gui/regression.ui:66
+msgid "_Save..."
+msgstr "Speichern..."
+
+#: src/ui/gui/psppire-data-window.c:1234
+msgid "Save _As..."
+msgstr "Speichern _unter..."
+
+#: src/ui/gui/psppire-data-window.c:1237
+msgid "_Rename Dataset..."
+msgstr "_Datenblatt umbenennen..."
+
+#: src/ui/gui/psppire-data-window.c:1248
+msgid "_Display Data File Information"
+msgstr "_Informationen zur Arbeitsdatei anzeigen"
+
+#: src/ui/gui/psppire-data-window.c:1255
+msgid "Working File"
+msgstr "Arbeitsdatei"
+
+#: src/ui/gui/psppire-data-window.c:1257
+msgid "_External File..."
+msgstr "_Externe Datei..."
+
+#: src/ui/gui/psppire-data-window.c:1267
+msgid "_Recently Used Data"
+msgstr "_Zuletzt verwendete Daten"
+
+#: src/ui/gui/psppire-data-window.c:1268
+msgid "Recently Used _Files"
+msgstr "Z_uletzt verwendete Dateien"
+
+#: src/ui/gui/psppire-data-window.c:1315 src/ui/gui/output-window.ui:82
+#: src/ui/gui/syntax-editor.ui:59
+msgid "_Quit"
+msgstr "_Beenden"
+
+#: src/ui/gui/psppire-data-window.c:1333 src/ui/gui/output-window.ui:89
+#: src/ui/gui/syntax-editor.ui:66
+msgid "_Edit"
+msgstr "_Bearbeiten"
+
+#: src/ui/gui/psppire-data-window.c:1339
+msgid "_Go To Variable..."
+msgstr "_Gehe zu Variable..."
+
+#: src/ui/gui/psppire-data-window.c:1340
+msgid "_Go To Case..."
+msgstr "Gehe zu _Fall..."
+
+#: src/ui/gui/psppire-data-window.c:1364 src/ui/gui/syntax-editor.ui:69
+msgid "Cu_t"
+msgstr "_Ausschneiden"
+
+#: src/ui/gui/psppire-data-window.c:1373 src/ui/gui/output-window.ui:96
+#: src/ui/gui/syntax-editor.ui:74
+msgid "_Copy"
+msgstr "_Kopieren"
+
+#: src/ui/gui/psppire-data-window.c:1380 src/ui/gui/syntax-editor.ui:79
+msgid "_Paste"
+msgstr "_Einfügen"
+
+#: src/ui/gui/psppire-data-window.c:1387
+msgid "Clear _Variables"
+msgstr "Variabl_e löschen"
+
+#: src/ui/gui/psppire-data-window.c:1401
+msgid "_Find..."
+msgstr "_Suchen..."
+
+#: src/ui/gui/psppire-data-window.c:1407 src/ui/gui/logistic.ui:246
+msgid "_Options..."
+msgstr "_Optionen..."
+
+#: src/ui/gui/psppire-data-window.c:1676
+msgid "Jump to variable"
+msgstr "Zu Variable springen"
+
+#: src/ui/gui/psppire-data-window.c:1689
+msgid "Jump to a case in the data sheet"
+msgstr "Gehe zu Fall"
+
+#: src/ui/gui/psppire-data-window.c:1703
+msgid "Search for values in the data"
+msgstr "Suche nach Werten im Datensatz"
+
+#: src/ui/gui/psppire-data-window.c:1715
+msgid "Create a new case at the current position"
+msgstr "An der aktuellen Stelle einen neuen Fall einfügen"
+
+#: src/ui/gui/psppire-data-window.c:1727
+msgid "Create a new variable at the current position"
+msgstr "An der aktuellen Stelle eine neue Variable einfügen"
+
+#: src/ui/gui/psppire-data-window.c:1741
+msgid "Split the active dataset"
+msgstr "Datei aufteilen"
+
+#: src/ui/gui/psppire-data-window.c:1753
+msgid "Weight cases by variable"
+msgstr "Fälle anhand einer Variable gewichten"
+
+#: src/ui/gui/psppire-data-window.c:1764
+msgid "Show/hide value labels"
+msgstr "Ein- / Ausblenden der Wertelabels"
+
+#: src/ui/gui/psppire-data-window.c:1904
+msgid "Data Editor"
+msgstr "Dateneditor"
+
+#: src/ui/gui/psppire-encoding-selector.c:140
+msgid "Automatically Detect"
+msgstr "Automatisch bestimmen"
+
+#: src/ui/gui/psppire-encoding-selector.c:147
+msgid "Locale Encoding"
+msgstr "Lokale Kodierung"
+
+#: src/ui/gui/psppire-encoding-selector.c:177
+msgid "Character Encoding: "
+msgstr "Zeichenkodierung:"
+
+#: src/ui/gui/psppire-import-assistant.c:337
+msgid "line"
+msgstr "Zeile"
+
+#: src/ui/gui/psppire-import-assistant.c:347
+msgid "var"
+msgstr "var"
+
+#: src/ui/gui/psppire-import-assistant.c:560
+msgid "Importing Spreadsheet Data"
+msgstr "Einlesen von Tabellendokumenten"
+
+#: src/ui/gui/psppire-import-assistant.c:686
+msgid "Text Files"
+msgstr "Text-Dateien"
+
+#: src/ui/gui/psppire-import-assistant.c:691
+msgid "Text (*.txt) Files"
+msgstr "Text-Dateien (*.txt)"
+
+#: src/ui/gui/psppire-import-assistant.c:697
+msgid "Plain Text (ASCII) Files"
+msgstr "Text-Dateien (ASCII)"
+
+#: src/ui/gui/psppire-import-assistant.c:702
+msgid "Comma Separated Value Files"
+msgstr "Komma-getrennte Datendatei (CVS)"
+
+#: src/ui/gui/psppire-import-assistant.c:709
+msgid "Tab Separated Value Files"
+msgstr "Tabulator-getrennte Datendatei"
+
+#: src/ui/gui/psppire-import-assistant.c:714
+msgid "Gnumeric Spreadsheet Files"
+msgstr "Gnumeric Tabellendokument"
+
+#: src/ui/gui/psppire-import-assistant.c:719
+msgid "OpenDocument Spreadsheet Files"
+msgstr "OpenDocument Tabellendokument"
+
+#: src/ui/gui/psppire-import-assistant.c:724
+msgid "All Spreadsheet Files"
+msgstr "Alle Tabellendokumente"
+
+#: src/ui/gui/psppire-import-assistant.c:733
+msgid "Select File to Import"
+msgstr "Wählen Sie eine Importdatei"
+
+#: src/ui/gui/psppire-import-assistant.c:770
+msgid "Importing Delimited Text Data"
+msgstr "Importieren von Textdaten"
+
+#: src/ui/gui/psppire-import-assistant.c:865
+msgid "Select the First Line"
+msgstr "Wählen Sie die erste Zeile aus"
+
+#: src/ui/gui/psppire-import-assistant.c:877
+msgid "Line"
+msgstr "Zeile"
+
+#: src/ui/gui/psppire-import-assistant.c:931
+msgid ""
+"This assistant will guide you through the process of importing data into PSPP from a text file with one line per case, in which fields are separated by tabs, commas, or other delimiters.\n"
+"\n"