+#: src/ui/gui/psppire-text-file.c:57
+#, c-format
+msgid "Could not open `%s'"
+msgstr "`%s' konnte nicht geöffnet werden"
+
+#: src/ui/gui/psppire-text-file.c:73
+#, c-format
+msgid "Error reading `%s': %s"
+msgstr "Fehler beim Lesen von `%s': %s"
+
+#: src/ui/gui/psppire-text-file.c:76
+#, c-format
+msgid "Failed to read `%s', because it contains a line over %d bytes long and therefore appears not to be a text file."
+msgstr "Fehler beim Einlesen der Datei `%s', weil sie eine Zeile enthält, die über %d Bytes lang ist. Dies deutet darauf hin, dass es sich nicht um eine Textdatei handelt."
+
+#: src/ui/gui/psppire-text-file.c:98
+#, c-format
+msgid "`%s' is empty."
+msgstr "`%s' ist leer."
+
+#: src/ui/gui/psppire-val-chooser.c:255
+msgid "through"
+msgstr "bis"
+
+#: src/ui/gui/psppire-val-chooser.c:288
+msgid "_Value:"
+msgstr "W_ert:"
+
+#: src/ui/gui/psppire-val-chooser.c:289
+msgid "_System Missing"
+msgstr "Systemde_finiert fehlend"
+
+#: src/ui/gui/psppire-val-chooser.c:290
+msgid "System _or User Missing"
+msgstr "System- _oder benutzerdefinierte fehlende Werte"
+
+#: src/ui/gui/psppire-val-chooser.c:291
+msgid "_Range:"
+msgstr "Bereich:"
+
+#: src/ui/gui/psppire-val-chooser.c:292
+msgid "Range, _LOWEST thru value"
+msgstr "Bereich, _KLEINSTER bis Wert"
+
+#: src/ui/gui/psppire-val-chooser.c:293
+msgid "Range, value thru _HIGHEST"
+msgstr "Bereic_h, Wert bis GRÖSSTER"
+
+#: src/ui/gui/psppire-val-chooser.c:294
+msgid "_All other values"
+msgstr "A_lle anderen Werte"
+
+#: src/ui/gui/psppire-var-view.c:153
+#, c-format
+msgid "Var%d"
+msgstr "Variable%d"
+
+#: src/ui/gui/psppire-var-sheet-header.c:64
+msgid "Decimal"
+msgstr "Dezimalstellen"
+
+#: src/ui/gui/psppire-var-sheet-header.c:79
+msgid "Align"
+msgstr "Ausrichtung"
+
+#: src/ui/gui/psppire-var-sheet-header.c:82
+msgid "Measure"
+msgstr "Messniveau"
+
+#: src/ui/gui/psppire-variable-sheet.c:423
+#, c-format
+msgid "{%s, %s}..."
+msgstr "{%s,%s}..."
+
+#: src/ui/source-init-opts.c:72
+#, c-format
+msgid "Algorithm must be either `%s' or `%s'."
+msgstr "Algorithmus muss entweder `%s' oder `%s' sein."
+
+#: src/ui/source-init-opts.c:97
+#, c-format
+msgid "Syntax must be either `%s' or `%s'."
+msgstr "Syntax mus entweder `%s' oder `%s' sein."
+
+#: src/ui/terminal/main.c:147
+msgid "Error encountered while ERROR=STOP is effective."
+msgstr "Ein Fehler wurde gefunden während ERROR = STOP aktiviert war."
+
+#: src/ui/terminal/main.c:153
+msgid "Stopping syntax file processing here to avoid a cascade of dependent command failures."
+msgstr "Die Ausführung der Syntaxdatei wird hier abgebrochen, um zu verhindern, dass eine Kaskade von fehlgeschlagenen Befehlen entsteht."
+
+#: src/ui/terminal/terminal-opts.c:150
+#, c-format
+msgid ""
+"PSPP, a program for statistical analysis of sampled data.\n"
+"Usage: %s [OPTION]... FILE...\n"
+"\n"
+"Arguments to long options also apply to equivalent short options.\n"
+"\n"
+"Output options:\n"
+" -o, --output=FILE output to FILE, default format from FILE's name\n"
+" -O format=FORMAT override format for previous -o\n"
+" -O OPTION=VALUE set output option to customize previous -o\n"
+" -O device={terminal|listing} override device type for previous -o\n"
+" -e, --error-file=FILE append errors, warnings, and notes to FILE\n"
+" --no-output disable default output driver\n"
+" --table-look=FILE use output style read from FILE\n"
+"Supported output formats: %s\n"
+"\n"
+"Language options:\n"
+" -I, --include=DIR append DIR to search path\n"
+" -I-, --no-include clear search path\n"
+" -r, --no-statrc disable running rc file at startup\n"
+" -a, --algorithm={compatible|enhanced}\n"
+" set to `compatible' if you want output\n"
+" calculated from broken algorithms\n"
+" -x, --syntax={compatible|enhanced}\n"
+" set to `compatible' to disable PSPP extensions\n"
+" -b, --batch interpret syntax in batch mode\n"
+" -i, --interactive interpret syntax in interactive mode\n"
+" --syntax-encoding=ENCODING specify encoding for syntax files\n"
+" -s, --safer don't allow some unsafe operations\n"
+"Default search path: %s\n"
+"\n"
+"Informative output:\n"
+" -h, --help display this help and exit\n"
+" -V, --version output version information and exit\n"
+"\n"
+"Non-option arguments are interpreted as syntax files to execute.\n"
+msgstr ""
+"PSPP, ein Programm zur statistischen Analyse von Stichproben.\n"
+"Befehl: %s [OPTIONEN]... DATEI...\n"
+"\n"
+"Die gezeigten Argumente für die Langform der Optionen finden auch in der entsprechenden Kurzform der Optionen Anwendung.\n"
+"\n"
+"Ausgabeoptionen:\n"
+" -o, --output=DATEI Ausgabe in DATEI, Voreinstellung des Dateiformats aus dem Dateinamen\n"
+" -O format=FORMAT überschreibt das Format aus der vorhergehenden Option -o\n"
+" -O OPTION=WERT setzt die Ausgabeoption um die vorhergehende Option -o anzupassen\n"
+" -O device={terminal|listing} überschreibt den Gerätetyp der vorhergehenden Option -o\n"
+" -e, --error-file=DATEI Fehler, Warnungen und Mitteilungen werden an DATEI angehängt\n"
+" --no-output das voreingerstellte Ausgabegerät wird ausser Kraft gesetzt\n"
+"Unterstützte Ausgabeformate: %s\n"
+"\n"
+"Sprachoptionen:\n"
+" -I, --include=VERZEICHNIS füge das VERZEICHNIS dem Suchpfad hinzu\n"
+" -I-, --no-include Löschung des Suchpfads\n"
+" -r, --no-statrc Ausführung der rc-Datei beim Start wird deaktiviert\n"
+" -a, --algorithm={compatible|enhanced}\n"
+" auf `compatible' setzen, um auch von fehlerhaften\n"
+" Algorithmen Ausgaben erzeugen zu lassen\n"
+" -x, --syntax={compatible|enhanced}\n"
+" auf `compatible' setzen, um PSPP-Erweiterungen auszuschalten\n"
+" -b, --batch interpretiere die Syntax im Batch-Modus\n"
+" -i, --interactive interpretiere die Syntax im interaktiven Modus\n"
+" --syntax-encoding=KODIERUNG legt die Kodierung der Syntaxdatei fest\n"
+" -s, --safer unterbindet unsichere Operationen\n"
+"Voreingestellter Suchpfad: %s\n"
+"\n"
+"Information:\n"
+" -h, --help Anzeige dieses Hilfetextes\n"
+" -V, --version Anzeige der Versionsinformationen\n"
+"\n"
+"Argumente ohne Optionen werden als Syntaxdateien interpretiert und ausgeführt.\n"
+
+#: src/ui/gui/find-dialog.c:197
+msgid "Find"
+msgstr "Suchen"
+
+#: src/ui/gui/find-dialog.c:662
+#, c-format
+msgid "Bad regular expression: %s"
+msgstr "Ungültiger regulärer Ausdruck: %s"
+
+#: src/ui/gui/help-menu.c:165
+msgid "A program for the analysis of sampled data"
+msgstr "Eine Software zur Analyse von statistischen Daten"
+
+#. TRANSLATORS: Do not translate this string. Instead, put the names of the people
+#. who have helped in the translation.
+#: src/ui/gui/help-menu.c:175
+msgid "translator-credits"
+msgstr ""
+"Matthias Keil\n"
+"Olaf Nöhring\n"
+"Bob Earl\n"
+"Friedrich Beckmann"
+
+#: src/ui/gui/help-menu.c:230
+#, c-format
+msgid "Help path conversion error: %s"
+msgstr "Fehler bei der Konvertierung des Hilfe-Pfades: %s"
+
+#: src/ui/gui/help-menu.c:251
+#, c-format
+msgid "Cannot open via html: %s with uri: %s The PSSP manual is also available at %s"
+msgstr "Das Handbuch kann nicht als html geöffnet werden: %s mit URI: %s . Das PSPP Benutzerhandbuch ist auch unter %s verfügbar"
+
+#: src/ui/gui/help-menu.c:272
+msgid "_Help"
+msgstr "_Hilfe"
+
+#: src/ui/gui/help-menu.c:275
+msgid "_About"
+msgstr "_Über"
+
+#: src/ui/gui/help-menu.c:276
+msgid "_System Information"
+msgstr "_Systeminformation"
+
+#: src/ui/gui/help-menu.c:277
+msgid "_Reference Manual"
+msgstr "_Handbuch inkl. Befehlsreferenz"
+
+#: src/ui/gui/main.c:177
+msgid "PSPP runs best on free platforms such as GNU and GNU/Linux. Windows is a non-free system. As such, certain features might work sub-optimally. For best results use a free system instead."
+msgstr "PSPP funktioniert am besten auf freien Plattformen wie GNU oder GNU/Linux. Windows ist kein freies System. Bestimmte Feature können deshalb möglicherweise suboptimal funktionieren. Um beste Ergebnisse zu erzielen empfehlen wir eine freies System."
+
+#: src/ui/gui/main.c:179
+msgid "Right click on variable lists to change between viewing the variables' names and their labels."
+msgstr "Rechtsklick auf die Variablenliste wechselt zwischen Variablennamen und den Labels."
+
+#: src/ui/gui/main.c:180
+msgid "Click \"Paste\" instead of \"OK\" when running procedures. This allows you to edit your commands before running them and you have better control over your work."
+msgstr "Klicke auf „Einfügen“ anstatt auf „Ok“ wenn Prozeduren ausgeführt werden sollen. Das ermöglicht das Ändern des Befehls, bevor der Befehl ausgeführt wird und erhöht die Kontrolle über die Arbeit."
+
+#: src/ui/gui/main.c:181
+msgid "Directly import your spreadsheets using the \"File | Import Data\" menu."
+msgstr "Importiere Tabellendaten direkt mit dem Menü „Datei | Daten importieren“."
+
+#: src/ui/gui/main.c:182
+msgid "For an easy way to convert string variables into numerically encoded variables, use \"Automatic Recode\" which preserves the variable names as labels."
+msgstr "Benutzte „Automatisches Umkodieren“ um Stringvariablen einfach in numerisch kodierte Variablen umzuwandeln. Dabei werden die Variablennamen als Label erhalten."
+
+#: src/ui/gui/main.c:183
+msgid "When browsing large data sets, use \"Windows | Split\" to see both ends of the data in the same view."
+msgstr "Nutze „Fenster | Teilen“ bei der Arbeit mit großen Datensätzen um beide Enden der Daten in der gleichen Ansicht zu haben."
+
+#: src/ui/gui/main.c:184
+msgid "Export your reports to ODT format for easy editing with the Libreoffice.org suite."
+msgstr "Exportiere die Berichte ins ODT Format um diese dann mit den Libreoffice.org Programmen einfach zu verändern."
+
+#: src/ui/gui/main.c:185
+msgid "Use \"Edit | Options\" to have your Output window automatically appear when statistics are generated."
+msgstr "Benutze „Bearbeiten | Optionen“ um das Ausgabefenster automatisch in den Vordergrund zu holen, wenn Statistiken generiert werden."
+
+#: src/ui/gui/main.c:186
+msgid "To easily reorder your variables, drag and drop them in the Variable View or the Data View."
+msgstr "Benutzte Drag and Drop im Variablen- oder Datenfenster um die Reihenfolge der Variablen zu ändern."
+
+#: src/ui/gui/main.c:205
+msgid "Psppire User Hint"
+msgstr "Psppire Awenderhinweis"
+
+#: src/ui/gui/main.c:213
+msgid "_Next Tip"
+msgstr "_Nächster Tip"
+
+#: src/ui/gui/main.c:216
+msgid "_Close"
+msgstr "_Schließen"
+
+#: src/ui/gui/main.c:411
+msgid "Psppire: Fatal Error"
+msgstr "Psppire: Fataler Fehler"
+
+#: src/ui/gui/main.c:416
+#, c-format
+msgid "You have discovered a bug in PSPP. Please report this to %s including all of the following information, and a description of what you were doing when this happened."
+msgstr "Sie haben einen Fehler in PSPP gefunden. Bitte informieren Sie %s über den Fehler inklusive der folgenden Informationen und einer Beschreibung was Sie getan haben als der Fehler aufgetreten ist."
+
+#: src/ui/gui/main.c:504
+msgid "Show version information and exit"
+msgstr "Zeige die Versionsinformation und beende die Anwendung"
+
+#: src/ui/gui/main.c:531
+msgid "Do not display the splash screen"
+msgstr "Zeige den Startbildschirm nicht an"
+
+#: src/ui/gui/main.c:533
+msgid "Do not attempt single instance negotiation"
+msgstr "Versuche keine Aushandlung einer Single Instance"
+
+#: src/ui/gui/missing-val-dialog.c:218
+msgid "The maximum length of a missing value for a string variable is 8 in UTF-8."
+msgstr "Die maximale Länge eines fehlenden Wertes für eine String-Variable beträgt 8 in UTF-8."
+
+#: src/ui/gui/missing-val-dialog.c:269
+msgid "At least one value must be specified"
+msgstr "Es muss mindestens ein Wert angegeben werden"
+
+#: src/ui/gui/missing-val-dialog.c:299
+msgid "Incorrect range specification"
+msgstr "Ungültige Bereichsspezifikation"
+
+#: src/ui/gui/psppire-data-editor.c:380
+#, c-format
+msgid "%d : %s"
+msgstr "%d: %s"
+
+#: src/ui/gui/psppire-data-editor.c:391
+#, c-format
+msgid "%'d case"
+msgid_plural "%'d cases"
+msgstr[0] "%'d Fall"
+msgstr[1] "%'d Fälle"
+
+#: src/ui/gui/psppire-data-editor.c:396
+#, c-format
+msgid "%'d variable"
+msgid_plural "%'d variables"
+msgstr[0] "%'d Variable"
+msgstr[1] "%'d Variablen"
+
+#: src/ui/gui/psppire-data-editor.c:485
+msgid "Case"
+msgstr "Fall"
+
+#: src/ui/gui/psppire-data-editor.c:495
+msgid "Data View"
+msgstr "Datenansicht"
+
+#: src/ui/gui/psppire-data-editor.c:505
+msgid "Variable View"
+msgstr "Variablenansicht"
+
+#: src/ui/gui/psppire-data-window.c:175
+msgid "Transformations Pending"
+msgstr "Offene Transformationen werden ausgeführt"
+
+#: src/ui/gui/psppire-data-window.c:191
+msgid "Filter off"
+msgstr "Keine Auswahl"
+
+#: src/ui/gui/psppire-data-window.c:203
+#, c-format
+msgid "Filter by %s"
+msgstr "Ausgewählt nach %s"
+
+#: src/ui/gui/psppire-data-window.c:224
+msgid "No Split"
+msgstr "Keine Aufteilung"
+
+#: src/ui/gui/psppire-data-window.c:233
+msgid "Split by "
+msgstr "Aufgeteilt nach "
+
+#: src/ui/gui/psppire-data-window.c:261
+msgid "Weights off"
+msgstr "Keine Gewichtung"
+
+#: src/ui/gui/psppire-data-window.c:273
+#, c-format
+msgid "Weight by %s"
+msgstr "Gewichtet nach %s"
+
+#: src/ui/gui/psppire-data-window.c:518
+#: src/ui/gui/psppire-import-assistant.c:370
+#: src/ui/gui/psppire-syntax-window.c:630 src/ui/gui/psppire-window.c:667
+msgid "All Files"
+msgstr "Alle Dateien"
+
+#: src/ui/gui/psppire-data-window.c:535
+msgid "System File"
+msgstr "PSPP Systemdatei"
+
+#: src/ui/gui/psppire-data-window.c:542
+msgid "Compressed System File"
+msgstr "Komprimierte PSPP Systemdatei"
+
+#: src/ui/gui/psppire-data-window.c:548
+msgid "Portable File"
+msgstr "Portable Datei"
+
+#: src/ui/gui/psppire-data-window.c:551
+msgid "Format:"
+msgstr "Format:"
+
+#: src/ui/gui/psppire-data-window.c:615
+msgid "Delete Existing Dataset?"
+msgstr "Vorhandenes Datenblatt löschen?"
+
+#: src/ui/gui/psppire-data-window.c:619
+#, c-format
+msgid "Renaming \"%s\" to \"%s\" will destroy the existing dataset named \"%s\". Are you sure that you want to do this?"
+msgstr "Umbenennen von \"%s\" nach \"%s\" löscht das vorhandene Datenblatt \"%s\". Sind Sie sicher, dass Sie das tun wollen?"
+
+#: src/ui/gui/psppire-data-window.c:625
+msgid "Delete"
+msgstr "Löschen"
+
+#: src/ui/gui/psppire-data-window.c:647
+#, c-format
+msgid "Please enter a new name for dataset \"%s\":"
+msgstr "Geben sie einen neuen Namen für das Datenblatt \"%s\" ein:"
+
+#: src/ui/gui/psppire-data-window.c:649
+msgid "Rename Dataset"
+msgstr "Datenblatt umbenennen"
+
+#: src/ui/gui/psppire-data-window.c:1199 src/ui/gui/output-window.ui:68
+#: src/ui/gui/syntax-editor.ui:22
+msgid "_File"
+msgstr "_Datei"
+
+#: src/ui/gui/psppire-data-window.c:1203 src/ui/gui/syntax-editor.ui:25
+msgid "_New"
+msgstr "_Neu"
+
+#: src/ui/gui/psppire-data-window.c:1210
+msgid "_Syntax"
+msgstr "_Syntax"
+
+#: src/ui/gui/psppire-data-window.c:1213 src/ui/gui/data-editor.ui:177
+#: src/ui/gui/data-editor.ui:189
+msgid "_Data"
+msgstr "_Daten"
+
+#: src/ui/gui/psppire-data-window.c:1220 src/ui/gui/syntax-editor.ui:36
+msgid "_Open"
+msgstr "_Öffnen"
+
+#: src/ui/gui/psppire-data-window.c:1223
+msgid "_Import Data..."
+msgstr "Daten _importieren..."
+
+#: src/ui/gui/psppire-data-window.c:1231 src/ui/gui/logistic.ui:261
+#: src/ui/gui/regression.ui:65
+msgid "_Save..."
+msgstr "Speichern..."
+
+#: src/ui/gui/psppire-data-window.c:1234
+msgid "Save _As..."
+msgstr "Speichern _unter..."
+
+#: src/ui/gui/psppire-data-window.c:1237
+msgid "_Rename Dataset..."
+msgstr "_Datenblatt umbenennen..."
+
+#: src/ui/gui/psppire-data-window.c:1248
+msgid "_Display Data File Information"
+msgstr "_Informationen zur Arbeitsdatei anzeigen"
+
+#: src/ui/gui/psppire-data-window.c:1255
+msgid "Working File"
+msgstr "Arbeitsdatei"
+
+#: src/ui/gui/psppire-data-window.c:1257
+msgid "_External File..."
+msgstr "_Externe Datei..."
+
+#: src/ui/gui/psppire-data-window.c:1267
+msgid "_Recently Used Data"
+msgstr "_Zuletzt verwendete Daten"
+
+#: src/ui/gui/psppire-data-window.c:1268
+msgid "Recently Used _Files"
+msgstr "Z_uletzt verwendete Dateien"
+
+#: src/ui/gui/psppire-data-window.c:1315 src/ui/gui/output-window.ui:82
+#: src/ui/gui/syntax-editor.ui:59
+msgid "_Quit"
+msgstr "_Beenden"
+
+#: src/ui/gui/psppire-data-window.c:1333 src/ui/gui/output-window.ui:89
+#: src/ui/gui/syntax-editor.ui:66
+msgid "_Edit"
+msgstr "_Bearbeiten"
+
+#: src/ui/gui/psppire-data-window.c:1339
+msgid "_Go To Variable..."
+msgstr "_Gehe zu Variable..."
+
+#: src/ui/gui/psppire-data-window.c:1340
+msgid "_Go To Case..."
+msgstr "Gehe zu _Fall..."
+
+#: src/ui/gui/psppire-data-window.c:1364 src/ui/gui/syntax-editor.ui:69
+msgid "Cu_t"
+msgstr "_Ausschneiden"
+
+#: src/ui/gui/psppire-data-window.c:1373 src/ui/gui/output-window.ui:96
+#: src/ui/gui/syntax-editor.ui:74
+msgid "_Copy"
+msgstr "_Kopieren"
+
+#: src/ui/gui/psppire-data-window.c:1380 src/ui/gui/syntax-editor.ui:79
+msgid "_Paste"
+msgstr "_Einfügen"
+
+#: src/ui/gui/psppire-data-window.c:1387
+msgid "Clear _Variables"
+msgstr "Variabl_e löschen"
+
+#: src/ui/gui/psppire-data-window.c:1401
+msgid "_Find..."
+msgstr "_Suchen..."
+
+#: src/ui/gui/psppire-data-window.c:1407 src/ui/gui/logistic.ui:246
+msgid "_Options..."
+msgstr "_Optionen..."
+
+#: src/ui/gui/psppire-data-window.c:1676
+msgid "Jump to variable"
+msgstr "Zu Variable springen"
+
+#: src/ui/gui/psppire-data-window.c:1689
+msgid "Jump to a case in the data sheet"
+msgstr "Gehe zu Fall"
+
+#: src/ui/gui/psppire-data-window.c:1703
+msgid "Search for values in the data"
+msgstr "Suche nach Werten im Datensatz"
+
+#: src/ui/gui/psppire-data-window.c:1715
+msgid "Create a new case at the current position"
+msgstr "An der aktuellen Stelle einen neuen Fall einfügen"
+
+#: src/ui/gui/psppire-data-window.c:1727
+msgid "Create a new variable at the current position"
+msgstr "An der aktuellen Stelle eine neue Variable einfügen"
+
+#: src/ui/gui/psppire-data-window.c:1741
+msgid "Split the active dataset"
+msgstr "Datei aufteilen"
+
+#: src/ui/gui/psppire-data-window.c:1753
+msgid "Weight cases by variable"
+msgstr "Fälle anhand einer Variable gewichten"
+
+#: src/ui/gui/psppire-data-window.c:1764
+msgid "Show/hide value labels"
+msgstr "Ein- / Ausblenden der Wertelabels"
+
+#: src/ui/gui/psppire-data-window.c:1904
+msgid "Data Editor"
+msgstr "Dateneditor"
+
+#: src/ui/gui/psppire-encoding-selector.c:140
+msgid "Automatically Detect"
+msgstr "Automatisch bestimmen"
+
+#: src/ui/gui/psppire-encoding-selector.c:147
+msgid "Locale Encoding"
+msgstr "Lokale Kodierung"
+
+#: src/ui/gui/psppire-encoding-selector.c:177
+msgid "Character Encoding: "
+msgstr "Zeichenkodierung: "
+
+#: src/ui/gui/psppire-import-assistant.c:375
+msgid "Text Files"
+msgstr "Text-Dateien"
+
+#: src/ui/gui/psppire-import-assistant.c:380
+msgid "Text (*.txt) Files"
+msgstr "Text-Dateien (*.txt)"
+
+#: src/ui/gui/psppire-import-assistant.c:386
+msgid "Plain Text (ASCII) Files"
+msgstr "Text-Dateien (ASCII)"
+
+#: src/ui/gui/psppire-import-assistant.c:391
+msgid "Comma Separated Value Files"
+msgstr "Komma-getrennte Datendatei (CVS)"
+
+#: src/ui/gui/psppire-import-assistant.c:398
+msgid "Tab Separated Value Files"
+msgstr "Tabulator-getrennte Datendatei"
+
+#: src/ui/gui/psppire-import-assistant.c:403
+msgid "Gnumeric Spreadsheet Files"
+msgstr "Gnumeric Tabellendokument"
+
+#: src/ui/gui/psppire-import-assistant.c:408
+msgid "OpenDocument Spreadsheet Files"
+msgstr "OpenDocument Tabellendokument"
+
+#: src/ui/gui/psppire-import-assistant.c:413
+msgid "All Spreadsheet Files"
+msgstr "Alle Tabellendokumente"
+
+#: src/ui/gui/psppire-import-assistant.c:422
+msgid "Select File to Import"
+msgstr "Wählen Sie eine Importdatei"
+
+#: src/ui/gui/psppire-import-assistant.c:461
+msgid "Importing Delimited Text Data"
+msgstr "Importieren von Textdaten"
+
+#: src/ui/gui/psppire-import-assistant.c:543
+msgid "Adjust Variable Formats"
+msgstr "Einstellen des Variablenformates"
+
+#: src/ui/gui/psppire-import-spreadsheet.c:384
+msgid "Importing Spreadsheet Data"
+msgstr "Einlesen von Tabellendokumenten"
+
+#: src/ui/gui/psppire-import-textfile.c:117
+msgid "line"
+msgstr "Zeile"
+
+#: src/ui/gui/psppire-import-textfile.c:127
+msgid "var"
+msgstr "var"
+
+#: src/ui/gui/psppire-import-textfile.c:251
+msgid "Select the First Line"
+msgstr "Wählen Sie die erste Zeile aus"
+
+#: src/ui/gui/psppire-import-textfile.c:263
+msgid "Line"
+msgstr "Zeile"
+
+#: src/ui/gui/psppire-import-textfile.c:322
+msgid ""
+"This assistant will guide you through the process of importing data into PSPP from a text file with one line per case, in which fields are separated by tabs, commas, or other delimiters.\n"
+"\n"
+msgstr ""
+"Dieser Assistent führt Sie durch den Einlesevorgang von Daten in PSPP, die aus einer Textdatei stammen, in der jede Zeile einen Fall darstellt und in der Datenfelder durch Tabulatoren, Kommas oder andere Trennzeichen separiert sind.\n"
+"\n"
+
+#: src/ui/gui/psppire-import-textfile.c:332
+#, c-format
+msgid "The selected file contains %'lu line of text. "
+msgid_plural "The selected file contains %'lu lines of text. "
+msgstr[0] "Die gewählte Datei enthält ungefähr %'lu Textzeile. "
+msgstr[1] "Die gewählte Datei enthält ungefähr %'lu Textzeilen. "
+
+#: src/ui/gui/psppire-import-textfile.c:341
+#, c-format
+msgid "The selected file contains approximately %'lu line of text. "
+msgid_plural "The selected file contains approximately %'lu lines of text. "
+msgstr[0] "Die gewählte Datei enthält ungefähr %lu Textzeile. "
+msgstr[1] "Die gewählte Datei enthält ungefähr %lu Textzeilen. "
+
+#: src/ui/gui/psppire-import-textfile.c:347
+#, c-format
+msgid "Only the first %zu line of the file will be shown for preview purposes in the following screens. "
+msgid_plural "Only the first %zu lines of the file will be shown for preview purposes in the following screens. "
+msgstr[0] "Nur die erste Zeile wird in den folgenden Vorschaufenstern gezeigt. "
+msgstr[1] "Nur die ersten %zu Zeilen werden in den folgenden Vorschaufenstern gezeigt. "
+
+#: src/ui/gui/psppire-import-textfile.c:356
+msgid "You may choose below how much of the file should actually be imported."
+msgstr "Sie können unten wählen, wie viele Zeilen der Datei tatsächlich eingelesen werden."
+
+#: src/ui/gui/psppire-import-textfile.c:365
+#, c-format
+msgid "Only the first %4d cases"
+msgstr "Nur die ersten %4d Fälle"
+
+#: src/ui/gui/psppire-import-textfile.c:376
+#, c-format
+msgid "Only the first %3d %% of file (approximately)"
+msgstr "Nur die ersten %3d %% der Datei (schätzungsweise)"
+
+#: src/ui/gui/psppire-import-textfile.c:404
+msgid "Select the Lines to Import"
+msgstr "Wählen Sie die zu importierenden Zeilen aus"
+
+#: src/ui/gui/psppire-import-textfile.c:563
+msgid "Choose Separators"
+msgstr "Trennzeichen auswählen"