+The following summary functions may be applied to any variable
+regardless of whether it is categorical or scalar. The default label
+for each function is listed in parentheses:
+
+@table @asis
+@item @code{COUNT} (``Count'')
+The sum of weights in a cell.
+
+@item @code{@i{area}PCT} or @code{@i{area}PCT.COUNT} (``@i{Area} %'')
+A percentage within the specified @var{area}.
+
+@item @code{@i{area}PCT.VALIDN} (``@i{Area} Valid N %'')
+A percentage of valid values within the specified @var{area}.
+
+@item @code{@i{area}PCT.TOTALN} (``@i{Area} Total N %'')
+A percentage of total values within the specified @var{area}.
+@end table
+
+The following summary functions apply only to scalar variables:
+
+@table @asis
+@item @code{MAXIMUM} (``Maximum'')
+The largest value.
+
+@item @code{MEAN} (``Mean'')
+The mean.
+
+@item @code{MEDIAN} (``Median'')
+The median value.
+
+@item @code{MINIMUM} (``Minimum'')
+The smallest value.
+
+@item @code{MISSING} (``Missing'')
+Sum of weights of user- and system-missing values.
+
+@item @code{MODE} (``Mode'')
+The highest-frequency value. Ties are broken by taking the smallest mode.
+
+@item @code{@i{area}PCT.SUM} (``@i{Area} Sum %'')
+Percentage of the sum of the values across @var{area}.
+
+@item @code{PTILE} @i{n} (``Percentile @i{n}'')
+The @var{n}th percentile, where @math{0 @leq{} @var{n} @leq{} 100}.
+
+@item @code{RANGE} (``Range'')
+The maximum minus the minimum.
+
+@item @code{SEMEAN} (``Std Error of Mean'')
+The standard error of the mean.
+
+@item @code{STDDEV} (``Std Deviation'')
+The standard deviation.
+
+@item @code{SUM} (``Sum'')
+The sum.
+
+@item @code{TOTALN} (``Total N'')
+The sum of total count weights.
+
+@item @code{VALIDN} (``Valid N'')
+The sum of valid count weights.
+
+@item @code{VARIANCE} (``Variance'')
+The variance.
+@end table
+
+If the @code{WEIGHT} subcommand specified an adjustment weight
+variable, then the following summary functions use its value instead
+of the dictionary weight variable. Otherwise, they are equivalent to
+the summary function without the @samp{E}-prefix:
+
+@itemize @bullet
+@item
+@code{ECOUNT} (``Adjusted Count'')
+
+@item
+@code{ETOTALN} (``Adjusted Total N'')
+
+@item
+@code{EVALIDN} (``Adjusted Valid N'')
+@end itemize
+
+The following summary functions with a @samp{U}-prefix are equivalent
+to the same ones without the prefix, except that they use unweighted
+counts:
+
+@itemize @bullet
+@item
+@code{UCOUNT} (``Unweighted Count'')
+
+@item
+@code{U@i{area}PCT} or @code{U@i{area}PCT.COUNT} (``Unweighted @i{Area} %'')
+
+@item
+@code{U@i{area}PCT.VALIDN} (``Unweighted @i{Area} Valid N %'')
+
+@item
+@code{U@i{area}PCT.TOTALN} (``Unweighted @i{Area} Total N %'')
+
+@item
+@code{UMEAN} (``Unweighted Mean'')
+
+@item
+@code{UMEDIAN} (``Unweighted Median'')
+
+@item
+@code{UMISSING} (``Unweighted Missing'')
+
+@item
+@code{UMODE} (``Unweight Mode'')
+
+@item
+@code{U@i{area}PCT.SUM} (``Unweighted @i{Area} Sum %'')
+
+@item
+@code{UPTILE} @i{n} (``Unweighted Percentile @i{n}'')
+
+@item
+@code{USEMEAN} (``Unweighted Std Error of Mean'')
+
+@item
+@code{USTDDEV} (``Unweighted Std Deviation'')
+
+@item
+@code{USUM} (``Unweighted Sum'')
+
+@item
+@code{UTOTALN} (``Unweighted Total N'')
+
+@item
+@code{UVALIDN} (``Unweighted Valid N'')
+
+@item
+@code{UVARIANCE} (``Unweighted Variance'')
+@end itemize
+
+@node CTABLES Statistics Positions and Labels
+@subsection Statistics Positions and Labels
+
+@display
+@t{/SLABELS}
+ [@t{POSITION=}@{@t{COLUMN} @math{|} @t{ROW} @math{|} @t{LAYER}@}]
+ [@t{VISIBLE=}@{@t{YES} @math{|} @t{NO}@}]
+@end display
+
+The @code{SLABELS} subcommand controls the position and visibility of
+summary statistics for the @code{TABLE} subcommand that it follows.
+
+@code{POSITION} sets the axis on which summary statistics appear.
+With @t{POSITION=COLUMN}, which is the default, each summary statistic
+appears in a column. For example:
+
+@example
+CTABLES /TABLE=qnd1 [MEAN, MEDIAN] BY qns3a.
+@end example
+@psppoutput {ctables13}
+
+@noindent
+With @t{POSITION=ROW}, each summary statistic appears in a row, as
+shown below:
+
+@example
+CTABLES /TABLE=qnd1 [MEAN, MEDIAN] BY qns3a /SLABELS POSITION=ROW.
+@end example
+@psppoutput {ctables14}
+
+@noindent
+@t{POSITION=LAYER} is also available to place each summary statistic in
+a separate layer.
+
+Labels for summary statistics are shown by default. Use
+@t{VISIBLE=NO} to suppress them. Because unlabeled data can cause
+confusion, it should only be considered if the meaning of the data is
+evident, as in a simple case like this:
+
+@example
+CTABLES /TABLE=AgeGroup [TABLEPCT] /SLABELS VISIBLE=NO.
+@end example
+@psppoutput {ctables15}
+
+@node CTABLES Category Label Positions
+@subsection Category Label Positions
+
+@display
+@t{/CLABELS} @{@t{AUTO} @math{|} @{@t{ROWLABELS}@math{|}@t{COLLABELS}@}@t{=}@{@t{OPPOSITE}@math{|}@t{LAYER}@}@}
+@end display
+
+The @code{CLABELS} subcommand controls the position of category labels
+for the @code{TABLE} subcommand that it follows. By default, or if
+@t{AUTO} is specified, category labels for a given variable nest
+inside the variable's label on the same axis. For example, the
+command below results in age categories nesting within the age group
+variable on the rows axis and gender categories within the gender
+variable on the columns axis:
+
+@example
+CTABLES /TABLE AgeGroup BY qns3a.
+@end example
+@psppoutput {ctables16}
+
+@t{ROWLABELS=OPPOSITE} or @t{COLLABELS=OPPOSITE} move row or column
+variable category labels, respectively, to the opposite axis. The
+setting affects only the innermost variable on the given axis. For
+example:
+
+@example
+CTABLES /TABLE AgeGroup BY qns3a /CLABELS ROWLABELS=OPPOSITE.
+CTABLES /TABLE AgeGroup BY qns3a /CLABELS COLLABELS=OPPOSITE.
+@end example
+@psppoutput {ctables17}
+
+@t{ROWLABELS=LAYER} or @t{COLLABELS=LAYER} move the innermost row or
+column variable category labels, respectively, to the layer axis.
+
+Only one axis's labels may be moved, whether to the opposite axis or
+to the layer axis.
+
+@node CTABLES Per-Variable Category Options
+@subsection Per-Variable Category Options
+
+@display
+@t{/CATEGORIES} @t{VARIABLES=}@i{variables}
+ @{@t{[}@i{value}@t{,} @i{value}@dots{}@t{]}
+ @math{|} [@t{ORDER=}@{@t{A} @math{|} @t{D}@}]
+ [@t{KEY=}@{@t{VALUE} @math{|} @t{LABEL} @math{|} @i{summary}@t{(}@i{variable}@t{)}@}]
+ [@t{MISSING=}@{@t{EXCLUDE} @math{|} @t{INCLUDE}@}]@}
+ [@t{TOTAL=}@{@t{NO} @math{|} @t{YES}@} [@t{LABEL=}@i{string}] [@t{POSITION=}@{@t{AFTER} @math{|} @t{BEFORE}@}]]
+ [@t{EMPTY=}@{@t{INCLUDE} @math{|} @t{EXCLUDE}@}]
+@end display
+
+The @code{CATEGORIES} subcommand specifies, for one or more
+categorical variables, the categories to include and exclude, the sort
+order for included categories, and treatment of missing values. It
+also controls the totals and subtotals to display. It may be
+specified any number of times, each time for a different set of
+variables. @code{CATEGORIES} applies to the table produced by the
+@code{TABLE} subcommand that it follows.
+
+@code{CATEGORIES} does not apply to scalar variables.
+
+@t{VARIABLES} is required. List the variables for the subcommand
+to affect.
+
+There are two way to specify the Categories to include and their sort
+order:
+
+@table @asis
+@item Explicit categories.
+@anchor{CTABLE Explicit Category List}
+To explicitly specify categories to include, list the categories
+within square brackets in the desired sort order. Use spaces or
+commas to separate values. Categories not covered by the list are
+excluded from analysis.
+
+Each element of the list takes one of the following forms:
+
+@table @t
+@item @i{number}
+@itemx '@i{string}'
+A numeric or string category value, for variables that have the
+corresponding type.
+
+@item '@i{date}'
+@itemx '@i{time}'
+A date or time category value, for variables that have a date or time
+print format.
+
+@item @i{min} THRU @i{max}
+@itemx LO THRU @i{max}
+@itemx @i{min} THRU HI
+A range of category values, where @var{min} and @var{max} each takes
+one of the forms above, in increasing order.
+
+@item MISSING
+All user-missing values. (To match individual user-missing values,
+specify their category values.)
+
+@item OTHERNM
+Any non-missing value not covered by any other element of the list
+(regardless of where @t{OTHERNM} is placed in the list).
+
+@item &@i{pcompute}
+A computed category name (@pxref{CTABLES Computed Categories}).
+@end table
+
+Additional forms, described later, allow for subtotals.
+If multiple elements of the list cover a given category, the last one
+in the list is considered to be a match.
+
+@item Implicit categories.
+Without an explicit list of categories, @pspp{} sorts
+categories automatically.
+
+The @code{KEY} setting specifies the sort key. By default, or with
+@code{KEY=VALUE}, categories are sorted by default. Categories may
+also be sorted by value label, with @code{KEY=LABEL}, or by the value
+of a summary function, e.g.@: @code{KEY=COUNT}. For summary
+functions, a variable name may be specified in parentheses, e.g.@:
+@code{KEY=MAXIUM(qnd1)}, and this is required for functions that apply
+only to scalar variables. The @code{PTILE} function also requires a
+percentage argument, e.g.@: @code{KEY=PTILE(qnd1, 90)}. Only summary
+functions used in the table may be used, except that @code{COUNT} is
+always allowed.
+
+By default, or with @code{ORDER=A}, categories are sorted in ascending
+order. Specify @code{ORDER=D} to sort in descending order.
+
+User-missing values are excluded by default, or with
+@code{MISSING=EXCLUDE}. Specify @code{MISSING=INCLUDE} to include
+user-missing values. The system-missing value is always excluded.
+@end table
+
+@subsubheading Totals and Subtotals
+
+@code{CATEGORIES} also controls display of totals and subtotals.
+Totals are not displayed by default, or with @code{TOTAL=NO}. Specify
+@code{TOTAL=YES} to display a total. By default, the total is labeled
+``Total''; use @code{LABEL="@i{label}"} to override it.
+
+Subtotals are also not displayed by default. To add one or more
+subtotals, use an explicit category list and insert @code{SUBTOTAL} or
+@code{HSUBTOTAL} in the position or positions where the subtotal
+should appear. With @code{SUBTOTAL}, the subtotal becomes an extra
+row or column or layer; @code{HSUBTOTAL} additionally hides the
+categories that make up the subtotal. Either way, the default label
+is ``Subtotal'', use @code{SUBTOTAL="@i{label}"} or
+@code{HSUBTOTAL="@i{label}"} to specify a custom label.
+
+By default, or with @code{POSITION=AFTER}, totals come after the last
+category and subtotals apply to categories that precede them. With
+@code{POSITION=BEFORE}, totals come before the first category and
+subtotals apply to categories that follow them.
+
+Only categorical variables may have totals and subtotals. Scalar
+variables may be ``totaled'' indirectly by enabling totals and
+subtotals on a categorical variable within which the scalar variable is
+summarized.
+
+@subsubheading Categories Without Values
+
+Some categories might not be included in the data set being analyzed.
+For example, our example data set has no cases in the ``15 or
+younger'' age group. By default, or with @code{EMPTY=INCLUDE},
+@pspp{} includes these empty categories in output tables. To exclude
+them, specify @code{EMPTY=EXCLUDE}.
+
+For implicit categories, empty categories potentially include all the
+values with labels for a given variable; for explicit categories, they
+include all the values listed individually and all labeled values
+covered by ranges or @code{MISSING} or @code{OTHERNM}.
+
+@node CTABLES Titles
+@subsection Titles
+
+@display
+@t{/TITLES}
+ [@t{TITLE=}@i{string}@dots{}]
+ [@t{CAPTION=}@i{string}@dots{}]
+ [@t{CORNER=}@i{string}@dots{}]
+@end display
+
+The @code{TITLES} subcommand sets the title, caption, and corner text
+for the table output for the previous @code{TABLE} subcommand. The
+title appears above the table, the caption below the table, and the
+corner text appears in the table's upper left corner. By default, the
+title is ``Custom Tables'' and the caption and corner text are empty.
+
+@node CTABLES Table Formatting
+@subsection Table Formatting
+
+@display
+@t{/FORMAT}
+ [@t{MINCOLWIDTH=}@{@t{DEFAULT} @math{|} @i{width}@}]
+ [@t{MAXCOLWIDTH=}@{@t{DEFAULT} @math{|} @i{width}@}]
+ [@t{UNITS=}@{@t{POINTS} @math{|} @t{INCHES} @math{|} @t{CM}@}]
+ [@t{EMPTY=}@{@t{ZERO} @math{|} @t{BLANK} @math{|} @i{string}@}]
+ [@t{MISSING=}@i{string}]
+@end display
+
+The @code{FORMAT} subcommand, which must precede the first
+@code{TABLE} subcommand, controls formatting for all the output
+tables. @code{FORMAT} and all of its settings are optional.
+
+Use @code{MINCOLWIDTH} and @code{MAXCOLWIDTH} to control the minimum
+or maximum width of columns in output tables. By default, or with
+@code{DEFAULT}, column width varies based on content. Otherwise,
+specify a number for either or both of these settings. If both are
+specified, @code{MAXCOLWIDTH} must be bigger than @code{MINCOLWIDTH}.
+The default unit, or with @code{UNITS=POINTS}, is points (1/72 inch),
+but specify @code{UNITS=INCHES} to use inches or @code{UNITS=CM} for
+centimeters.
+
+By default, or with @code{EMPTY=ZERO}, zero values are displayed in
+their usual format. Use @code{EMPTY=BLANK} to use an empty cell
+instead, or @code{EMPTY="@i{string}"} to use the specified string.
+
+By default, missing values are displayed as @samp{.}, the same as in
+other tables. Specify @code{MISSING="@i{string}"} to instead use a
+custom string.
+
+@node CTABLES Display of Variable Labels
+@subsection Display of Variable Labels
+
+@display
+@t{/VLABELS}
+ @t{VARIABLES=}@i{variables}
+ @t{DISPLAY}=@{@t{DEFAULT} @math{|} @t{NAME} @math{|} @t{LABEL} @math{|} @t{BOTH} @math{|} @t{NONE}@}
+@end display
+
+The @code{VLABELS} subcommand, which must precede the first
+@code{TABLE} subcommand, controls display of variable labels in all
+the output tables. @code{VLABELS} is optional. It may appear
+multiple times to adjust settings for different variables.
+
+@code{VARIABLES} and @code{DISPLAY} are required. The value of
+@code{DISPLAY} controls how variable labels are displayed for the
+variables listed on @code{VARIABLES}. The supported values are:
+
+@table @code
+@item DEFAULT
+Uses the setting from @ref{SET TVARS}.
+
+@item NAME
+Show only a variable name.
+
+@item LABEL
+Show only a variable label.
+
+@item BOTH
+Show variable name and label.
+
+@item NONE
+Show nothing.
+@end table
+
+@node CTABLES Missing Value Treatment
+@subsection Missing Value Treatment
+
+@display
+@t{/SMISSING} @{@t{VARIABLE} @math{|} @t{LISTWISE}@}
+@end display
+
+The @code{SMISSING} subcommand, which must precede the first
+@code{TABLE} subcommand, controls treatment of missing values for
+scalar variables in producing all the output tables. @code{SMISSING}
+is optional.
+
+With @code{SMISSING=VARIABLE}, which is the default, missing values
+are excluded on a variable-by-variable basis. With
+@code{SMISSING=LISTWISE}, when scalar variables are stacked, a missing
+value for any of the scalar variables causes the case to be excluded
+for all of them.
+
+@node CTABLES Computed Categories
+@subsection Computed Categories
+
+@display
+@t{/PCOMPUTE} @t{&}@i{category}@t{=EXPR(}@i{expression}@t{)}
+@t{/PPROPERTIES} @t{&}@i{category}@dots{}
+ [@t{LABEL=}@i{string}]
+ [@t{FORMAT=}[@i{summary} @i{format}]@dots{}]
+ [@t{HIDESOURCECATS=}@{@t{NO} @math{|} @t{YES}@}
+@end display
+
+@dfn{Computed categories}, also called @dfn{postcomputes}, are
+categories created using arithmetic on categories obtained from the
+data. The @code{PCOMPUTE} subcommand defines computed categories,
+which can then be used in two places: on @code{CATEGORIES} within an
+explicit category list (@pxref{CTABLE Explicit Category List}), and on
+the @code{PPROPERTIES} subcommand to define further properties for a
+given postcompute.
+
+@code{PCOMPUTE} must precede the first @code{TABLE} command. It is
+optional and it may be used multiple times to define multiple
+postcomputes.