pivot table procedure conceptually works

[pspp] / INSTALL

diff --git a/INSTALL b/INSTALL
index e687c55114b6d45690a3a48965225dcf92a6bbb7..b9fd6b1ceefa3c59dbc44c5aa1c6d78104325f55 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -2,7 +2,34 @@ Installation Instructions for GNU pspp
 **************************************
 
 These instructions are based on the generic GNU installation
 **************************************
 
 These instructions are based on the generic GNU installation

-instructions, but they have been tailored for PSPP.
+instructions, but they have been tailored for PSPP.  These instructions
+apply only to people wishing to build and install PSPP from source. 
+
+Overview
+========
+
+PSPP uses the standard GNU configuration system.  Therefore, if all is well,
+the following simple procedure should work, even on non-GNU systems:
+
+ tar -xzf pspp-*.tar.gz
+ cd pspp-*
+ ./configure
+ make 
+ sudo make install
+
+Obviously, you should replace 'pspp-*' in the above, with the name of
+the tarball you are installing.  
+
+In 99% of cases, that is all you have to do - FINISHED! 
+
+
+
+
+If any part of the above process fails, then it is
+likely that one or more of the necessary prerequisites is missing
+from your system.  The following paragraphs contain highly detailed
+information which will help you fix this.
+

 
 Before You Install
 ==================
 
 Before You Install
 ==================


@@ -18,13 +45,13 @@ not present on your system.
 
 The following packages are required to install PSPP:
 
 
 The following packages are required to install PSPP:
 

-    * An ANSI C compiler and tool chain.  On Unix-like systems, we
+    * A C compiler and tool chain.  On Unix-like systems, we

       recommend GCC, but any modern compilation environment should
       work.  On Microsoft Windows, Cygwin (http://www.cygwin.com/) and
       MinGW (http://www.mingw.org/) are known to work.
 
     * The GNU Scientific Library (http://www.gnu.org/software/gsl/),
       recommend GCC, but any modern compilation environment should
       work.  On Microsoft Windows, Cygwin (http://www.cygwin.com/) and
       MinGW (http://www.mingw.org/) are known to work.
 
     * The GNU Scientific Library (http://www.gnu.org/software/gsl/),

-      version 1.6 or later, including libgslcblas included with GSL.
+      version 1.13 or later, including libgslcblas included with GSL.

 
     * Perl (http://www.perl.org/), version 5.005_03 or later.  Perl is
       required during build but not after installation.
 
     * Perl (http://www.perl.org/), version 5.005_03 or later.  Perl is
       required during build but not after installation.


@@ -33,12 +60,20 @@ The following packages are required to install PSPP:
       If you don't have a version already, you can install GNU
       libiconv (http://www.gnu.org/software/libiconv/).
 
       If you don't have a version already, you can install GNU
       libiconv (http://www.gnu.org/software/libiconv/).
 

-The following package is required to enable PSPP's graphing features.
-If you cannot arrange to install it, you must run `configure' with
---without-libplot.
+    * libintl, from GNU gettext (http://www.gnu.org/software/gettext).
+      GNU libc includes an integrated libintl, so there is no need to
+      separately install libintl on a GNU/Linux system.
+
+    * zlib (http://www.zlib.net/).
+
+The following packages are required to enable PSPP's graphing
+features.  If you cannot arrange to install them, you must run
+`configure' with --without-cairo (in which case you will get no graphing
+capability).

 
 

-    * libplot, from GNU plotutils
-      (http://www.gnu.org/software/plotutils/).
+    * Cairo (http://cairographics.org/), version 1.5 or later.
+
+    * Pango (http://www.pango.org/), version 1.22 or later.

 
 The following packages are required to enable PSPPIRE, the graphical
 user interface for PSPP.  If you cannot install them or do not wish to
 
 The following packages are required to enable PSPPIRE, the graphical
 user interface for PSPP.  If you cannot install them or do not wish to


@@ -48,27 +83,24 @@ use the GUI, you must run `configure' with --without-gui.
       0.18 and 0.19 have a bug that will prevent library detection,
       but other versions should be fine.
 
       0.18 and 0.19 have a bug that will prevent library detection,
       but other versions should be fine.
 

-    * GTK+ (http://www.gtk.org/), version 2.12.0 or later.
+    * GTK+ (http://www.gtk.org/), version 2.24.0  -  The Gtk+-3.x series will NOT work!
+
+    * GtkSourceView (http://projects.gnome.org/gtksourceview/) 
+      version 2.2 or later.

 
 

-    * libglade (http://www.jamesh.id.au/software/libglade/), version
-      2.6 or later.
+The following packages are optional:

 
 

-Installing the following packages will allow your PSPP binary to read
+Installing the following packages will allow your PSPP program to read

 Gnumeric files.
 
 Gnumeric files.
 

-    * pkg-config (http://pkg-config.freedesktop.org/wiki/).  Versions
-      0.18 and 0.19 have a bug that will prevent library detection,
-      but other versions should be fine.
+    * libxml2 (http://xmlsoft.org/).  

 
 

-      To cross-compile PSPP, you will likely need to set the
-      PKG_CONFIG_LIBDIR environment variable to point to an
-      appropriate pkg-config for the cross-compilation environment.
-
-    * zlib (http://www.zlib.net/).
+Installing the following packages will allow your PSPP program to write
+OpenDocument text (ODT) files:

 
     * libxml2 (http://xmlsoft.org/).  
 
 
     * libxml2 (http://xmlsoft.org/).  
 

-The following packages are optional.
+Other optional packages:

 
     * libncurses (http://www.gnu.org/software/ncurses/).  Without it,
       PSPP will assume it is running in an 80x25 terminal.
 
     * libncurses (http://www.gnu.org/software/ncurses/).  Without it,
       PSPP will assume it is running in an 80x25 terminal.


@@ -82,8 +114,14 @@ The following packages are optional.
       later.  Installing Texinfo will allow you to build PSPP
       documentation in PostScript or PDF format.
 
       later.  Installing Texinfo will allow you to build PSPP
       documentation in PostScript or PDF format.
 

-    * libpq, from Postgresql (http://postgresql.org). This enables PSPP 
-      to read Postgresql databases.
+    * libpq, from Postgresql (http://postgresql.org).  This enables PSPP 
+      to read Postgresql databases.  The tests for the Postgresql
+      interface, but not the Postgresql interface itself, requires the
+      Postgresql server to be installed.
+
+    * The Text::Diff module for Perl (http://cpan.org).  This enables
+      PSPP to test the Perl module more thoroughly.  It is not needed
+      to build or use the Perl module.

 
 Basic Installation
 ==================
 
 Basic Installation
 ==================


@@ -152,8 +190,13 @@ release.
 
   4. Type `make install' to install the programs and any data files
      and documentation.  Ordinarily you will need root permissions to
 
   4. Type `make install' to install the programs and any data files
      and documentation.  Ordinarily you will need root permissions to

-     do this; if you cannot get root permissions, see "Installation
-     Names", below.
+     do this.  The "su" and "sudo" commands are common ways to obtain
+     root permissions.  If you cannot get root permissions, see
+     "Installation Names", below.
+
+     Please note:  The `make install' target does NOT install the perl
+     module (see below).  To install the perl module, you must change to
+     the `perl-module' directory and manually run `make install' there.

 
   5. You can remove the program binaries and object files from the
      source code directory by typing `make clean'.  To also remove the
 
   5. You can remove the program binaries and object files from the
      source code directory by typing `make clean'.  To also remove the


@@ -171,9 +214,13 @@ details on some of the pertinent environment variables.
 by setting variables in the command line or in the environment.  Here
 is an example:
 
 by setting variables in the command line or in the environment.  Here
 is an example:
 

-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c89 CFLAGS=-O0 LIBS=-lposix

 
 

-   See "Defining Variables", below, for more details.
+To cross-compile PSPP, you will likely need to set the
+PKG_CONFIG_LIBDIR environment variable to point to an
+appropriate pkg-config for the cross-compilation environment.
+
+See "Defining Variables", below, for more details.

 
 Installation Names
 ==================
 
 Installation Names
 ==================


@@ -211,14 +258,17 @@ suffix on their names by giving `configure' the  option
 Optional Features
 =================
 
 Optional Features
 =================
 

-`--without-libplot'
-    Don't compile in support for charts (using libplot).  This is
-    useful if your system doesn't have the libplot library.
+`--without-cairo'
+    Don't compile in support for charts (using Cairo and Pango).  This
+    is useful if your system lacks these libraries.

 
 `--without-gui'
     Don't build the PSPPIRE gui.  Use this option if you only want to
     build the command line version of PSPP.
 
 
 `--without-gui'
     Don't build the PSPPIRE gui.  Use this option if you only want to
     build the command line version of PSPP.
 

+    Cairo and Pango required to build the GUI, so --without-cairo
+    implies --without-gui.
+

 `--with-gui-tools'
     Build the gui developer tools.  There is no reason to use this
     option unless you're involved with the development of PSPP
 `--with-gui-tools'
     Build the gui developer tools.  There is no reason to use this
     option unless you're involved with the development of PSPP


@@ -230,13 +280,15 @@ Optional Features
     In these cases you can use --without-lib{xx} to force configure
     to disregard it.
 
     In these cases you can use --without-lib{xx} to force configure
     to disregard it.
 

-`--enable-anachronistic-dependencies'
-   If you use this option, some of the checks for dependent libraries
-   will be relaxed, permitting configure to succeed when older versions
-   of libraries are detected.   Use of this option is not recommended.
-   If you use it, some features may be missing and the build may fail
-   with obscure error messages.
-   
+`--without-perl-module'
+   Disable building the Perl module, in case it does not build properly
+   or you do not need it.
+
+`--enable-relocatable'
+   This option is useful for building a package which can be installed
+   into an arbitrary directory and freely copied to any other directory.
+   If you use this option, you will probably want to install the pspp
+   with a command similar to "make install DESTDIR=<destination>".

 
 Defining Variables
 ==================
 
 Defining Variables
 ==================


@@ -295,7 +347,7 @@ Generic `configure' Options
 `configure --help' for more details.
 
 ----------------------------------------------------------------------
 `configure --help' for more details.
 
 ----------------------------------------------------------------------

-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2007 Free
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, 2007, 2013 Free

 Software Foundation, Inc.
 
 This file is free documentation; the Free Software Foundation gives
 Software Foundation, Inc.
 
 This file is free documentation; the Free Software Foundation gives