1 # SOME DESCRIPTIVE TITLE.
2 # Copyright (C) YEAR Free Software Foundation, Inc.
3 # This file is distributed under the same license as the PACKAGE package.
4 # FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
9 "Project-Id-Version: PACKAGE VERSION\n"
10 "Report-Msgid-Bugs-To: pspp-dev@gnu.org\n"
11 "POT-Creation-Date: 2004-02-03 19:04+0800\n"
12 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
13 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
14 "Language-Team: LANGUAGE <LL@li.org>\n"
16 "Content-Type: text/plain; charset=CHARSET\n"
17 "Content-Transfer-Encoding: 8bit\n"
18 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
20 #: src/crosstabs.q:255
22 "Missing mode REPORT not allowed in general mode. Assuming MISSING=TABLE."
25 #: src/crosstabs.q:265
26 msgid "Write mode ALL not allowed in general mode. Assuming WRITE=CELLS."
29 #: src/crosstabs.q:324
33 #: src/crosstabs.q:391
34 msgid "VARIABLES must be specified before TABLES."
37 #: src/crosstabs.q:428
39 msgid "Maximum value (%ld) less than minimum value (%ld)."
42 #: src/crosstabs.q:865
46 #: src/crosstabs.q:867
50 #: src/crosstabs.q:868 src/frequencies.q:999
54 #: src/crosstabs.q:869 src/frequencies.q:1066
58 #: src/crosstabs.q:870 src/crosstabs.q:1071 src/crosstabs.q:1800
59 #: src/frequencies.q:1075
63 #: src/crosstabs.q:880 src/t-test.q:529 src/t-test.q:560 src/t-test.q:640
67 #: src/crosstabs.q:881 src/frequencies.q:1003 src/frequencies.q:1004
68 #: src/frequencies.q:1005
72 #: src/crosstabs.q:1120
76 #: src/crosstabs.q:1121
80 #: src/crosstabs.q:1122
84 #: src/crosstabs.q:1123
88 #: src/crosstabs.q:1124
92 #: src/crosstabs.q:1125
96 #: src/crosstabs.q:1126
100 #: src/crosstabs.q:1127
104 #: src/crosstabs.q:1160 src/crosstabs.q:1187 src/crosstabs.q:1207
105 #: src/crosstabs.q:1228
109 #: src/crosstabs.q:1161 src/crosstabs.q:1188 src/crosstabs.q:1208
110 #: src/crosstabs.q:1230 src/frequencies.q:1001 src/frequencies.q:1118
111 #: src/sysfile-info.c:536 src/vfm.c:1094
115 #: src/crosstabs.q:1162 src/t-test.q:809 src/t-test.q:913 src/t-test.q:998
119 #: src/crosstabs.q:1164
120 msgid "Asymp. Sig. (2-sided)"
123 #: src/crosstabs.q:1166
124 msgid "Exact. Sig. (2-sided)"
127 #: src/crosstabs.q:1168
128 msgid "Exact. Sig. (1-sided)"
131 #: src/crosstabs.q:1186 src/crosstabs.q:1227
135 #: src/crosstabs.q:1189 src/crosstabs.q:1231
136 msgid "Asymp. Std. Error"
139 #: src/crosstabs.q:1190 src/crosstabs.q:1232
143 #: src/crosstabs.q:1191 src/crosstabs.q:1233
147 #: src/crosstabs.q:1206
149 msgid " 95%% Confidence Interval"
152 #: src/crosstabs.q:1209 src/t-test.q:813 src/t-test.q:910 src/t-test.q:1001
156 #: src/crosstabs.q:1210 src/t-test.q:814 src/t-test.q:911 src/t-test.q:1002
160 #: src/crosstabs.q:1229
164 #: src/crosstabs.q:1977
165 msgid "Pearson Chi-Square"
168 #: src/crosstabs.q:1978
169 msgid "Likelihood Ratio"
172 #: src/crosstabs.q:1979
173 msgid "Fisher's Exact Test"
176 #: src/crosstabs.q:1980
177 msgid "Continuity Correction"
180 #: src/crosstabs.q:1981
181 msgid "Linear-by-Linear Association"
184 #: src/crosstabs.q:2018 src/crosstabs.q:2088 src/crosstabs.q:2147
185 msgid "N of Valid Cases"
188 #: src/crosstabs.q:2034 src/crosstabs.q:2163
189 msgid "Nominal by Nominal"
192 #: src/crosstabs.q:2035 src/crosstabs.q:2164
193 msgid "Ordinal by Ordinal"
196 #: src/crosstabs.q:2036
197 msgid "Interval by Interval"
200 #: src/crosstabs.q:2037
201 msgid "Measure of Agreement"
204 #: src/crosstabs.q:2042
208 #: src/crosstabs.q:2043
212 #: src/crosstabs.q:2044
213 msgid "Contingency Coefficient"
216 #: src/crosstabs.q:2045
217 msgid "Kendall's tau-b"
220 #: src/crosstabs.q:2046
221 msgid "Kendall's tau-c"
224 #: src/crosstabs.q:2047
228 #: src/crosstabs.q:2048
229 msgid "Spearman Correlation"
232 #: src/crosstabs.q:2049
236 #: src/crosstabs.q:2050
240 #: src/crosstabs.q:2120
242 msgid "Odds Ratio for %s (%g / %g)"
245 #: src/crosstabs.q:2123
247 msgid "Odds Ratio for %s (%.*s / %.*s)"
250 #: src/crosstabs.q:2131
252 msgid "For cohort %s = %g"
255 #: src/crosstabs.q:2134
257 msgid "For cohort %s = %.*s"
260 #: src/crosstabs.q:2165
261 msgid "Nominal by Interval"
264 #: src/crosstabs.q:2170
268 #: src/crosstabs.q:2171
269 msgid "Goodman and Kruskal tau"
272 #: src/crosstabs.q:2172
273 msgid "Uncertainty Coefficient"
276 #: src/crosstabs.q:2173
280 #: src/crosstabs.q:2174
284 #: src/crosstabs.q:2179
288 #: src/crosstabs.q:2180 src/crosstabs.q:2181
293 #: src/descript.q:152 src/frequencies.q:94 src/t-test.q:530 src/t-test.q:561
294 #: src/t-test.q:639 src/t-test.q:907
298 #: src/descript.q:152
302 #: src/descript.q:153 src/frequencies.q:95
306 #: src/descript.q:153
310 #: src/descript.q:153
314 #: src/descript.q:154
315 msgid "standard error of mean"
318 #: src/descript.q:155 src/frequencies.q:98
322 #: src/descript.q:155
326 #: src/descript.q:156
327 msgid "standard deviation"
330 #: src/descript.q:157 src/frequencies.q:99
334 #: src/descript.q:158
338 #: src/descript.q:158
342 #: src/descript.q:159 src/frequencies.q:100
346 #: src/descript.q:160
350 #: src/descript.q:160
354 #: src/descript.q:161 src/frequencies.q:101
358 #: src/descript.q:161
362 #: src/descript.q:161
366 #: src/descript.q:162
367 msgid "standard error of kurtosis"
370 #: src/descript.q:163 src/frequencies.q:102
374 #: src/descript.q:163
378 #: src/descript.q:164
382 #: src/descript.q:165 src/frequencies.q:103
386 #: src/descript.q:165
390 #: src/descript.q:165
394 #: src/descript.q:166
395 msgid "standard error of skewness"
398 #: src/descript.q:167 src/frequencies.q:104
402 #: src/descript.q:167
406 #: src/descript.q:167 src/sfm-read.c:1202
410 #: src/descript.q:168 src/frequencies.q:105
414 #: src/descript.q:168
418 #: src/descript.q:169
422 #: src/descript.q:170 src/frequencies.q:106
426 #: src/descript.q:170
430 #: src/descript.q:171
434 #: src/descript.q:172 src/frequencies.q:107
438 #: src/descript.q:172
442 #: src/descript.q:213 src/list.q:144
443 msgid "No variables specified."
446 #: src/descript.q:219
447 msgid "OPTIONS may not be used with SAVE, FORMAT, or MISSING."
450 #: src/descript.q:281
452 msgid "It's not possible to sort on `%s' without displaying `%s'."
455 #: src/descript.q:295
457 "At least one case in the data file had a weight value that was system-"
458 "missing, zero, or negative. These case(s) were ignored."
461 #: src/descript.q:336
463 "Names for z-score variables must be given for individual variables, not for "
464 "groups of variables."
467 #: src/descript.q:344
468 msgid "Name for z-score variable expected."
471 #: src/descript.q:349
474 "Z-score variable name `%s' is a duplicate variable name with a current "
478 #: src/descript.q:358
480 msgid "Z-score variable name `%s' is used multiple times."
483 #: src/descript.q:366
484 msgid "`)' expected after z-score variable name."
487 #: src/descript.q:426
489 "Ran out of generic names for Z-score variables. There are only 126 generic "
490 "names: ZSC001-ZSC0999, STDZ01-STDZ09, ZZZZ01-ZZZZ09, ZQZQ01-ZQZQ09."
493 #: src/descript.q:455
494 msgid "Mapping of variables to corresponding Z-scores."
497 #: src/descript.q:460
501 #: src/descript.q:461
505 #: src/descript.q:548 src/descript.q:554
509 #: src/descript.q:792 src/data-list.c:732 src/data-list.c:869 src/print.c:805
510 #: src/sysfile-info.c:135 src/sysfile-info.c:370 src/vfm.c:1093
514 #: src/descript.q:796
518 #: src/descript.q:797
522 #: src/descript.q:824
524 msgid "Valid cases = %g; cases with missing value(s) = %g."
527 #: src/file-handle.q:72
530 "File handle %s had already been defined to refer to file %s. It is not "
531 "possible to redefine a file handle within a session."
534 #: src/file-handle.q:88 src/autorecode.c:121 src/command.c:696
535 #: src/compute.c:284 src/data-list.c:372 src/data-list.c:842
536 #: src/data-list.c:1645 src/do-if.c:264 src/get.c:359 src/lexer.c:387
537 #: src/loop.c:248 src/matrix-data.c:506 src/print.c:340 src/print.c:1081
538 #: src/recode.c:409 src/sel-if.c:56 src/sel-if.c:136 src/vector.c:197
539 msgid "expecting end of command"
542 #: src/file-handle.q:94
543 msgid "The FILE HANDLE required subcommand NAME is not present."
546 #: src/file-handle.q:107
548 "Fixed length records were specified on /RECFORM, but record length was not "
549 "specified on /LRECL. 80-character records will be assumed."
552 #: src/file-handle.q:114
555 "Record length (%ld) must be at least one byte. 80-character records will be "
559 #: src/file-handle.q:126 src/file-handle.q:140
562 "%s is not implemented, as the author doesn't know what it is supposed to "
563 "do. Send a note to %s."
566 #: src/file-handle.q:147 src/file-handle.q:150
568 msgid "%s is not implemented. If you care, complain."
571 #: src/file-handle.q:232
573 msgid "File handle `%s' has not been previously declared on FILE HANDLE."
576 #: src/file-handle.q:319
577 msgid "<Inline File>"
580 #: src/file-handle.q:338
581 msgid "expecting a file name or handle"
584 #: src/frequencies.q:96
588 #: src/frequencies.q:97
592 #: src/frequencies.q:268
594 "At most one of BARCHART, HISTOGRAM, or HBAR should be given. HBAR will be "
595 "assumed. Argument values will be given precedence increasing along the "
599 #: src/frequencies.q:349
602 "MAX must be greater than or equal to MIN, if both are specified. However, "
603 "MIN was specified as %g and MAX as %g. MIN and MAX will be ignored."
606 #: src/frequencies.q:627
608 "Upper limit of integer mode value range must be greater than lower limit."
611 #: src/frequencies.q:639
613 msgid "Variable %s specified multiple times on VARIABLES subcommand."
616 #: src/frequencies.q:652
618 msgid "Integer mode specified, but %s is not a numeric variable."
621 #: src/frequencies.q:714
622 msgid "`)' expected after GROUPED interval list."
625 #: src/frequencies.q:724
627 msgid "Variables %s specified on GROUPED but not on VARIABLES."
630 #: src/frequencies.q:727
632 msgid "Variables %s specified multiple times on GROUPED subcommand."
635 #: src/frequencies.q:787
636 msgid "Percentile list expected after PERCENTILES."
639 #: src/frequencies.q:795
640 msgid "Percentiles must be greater than 0 and less than 100."
643 #: src/frequencies.q:1000 src/frequencies.q:1090 src/frequencies.q:1091
644 #: src/frequencies.q:1121
648 #: src/frequencies.q:1002
652 #: src/frequencies.q:1021
656 #: src/frequencies.q:1119
660 #: src/frequencies.q:1120 src/frequencies.q:1122
664 #: src/frequencies.q:1277
666 msgid "No valid data for variable %s; statistics not displayed."
669 #: src/frequencies.q:1300
676 "The first case (%ld) specified precedes the last case (%ld) specified. The "
677 "values will be swapped."
683 "The first case (%ld) to list is less than 1. The value is being reset to 1."
689 "The last case (%ld) to list is less than 1. The value is being reset to 1."
694 msgid "The step value %ld is less than 1. The value is being reset to 1."
698 msgid "`/FORMAT WEIGHT' specified, but weighting is not on."
701 #: src/list.q:259 src/html.c:402
703 msgid "Cannot open first page on HTML device %s."
711 msgid "Missing required subcommand TABLES."
715 msgid "TABLES or CROSSBREAK subcommand may not appear more than once."
721 "Variable %s specified on TABLES or CROSSBREAK, but not specified on "
727 msgid "LOWEST and HIGHEST may not be used for independent variables (%s)."
733 "Independent variables (%s) may not have noninteger endpoints in their ranges."
737 msgid "VARIABLES must precede TABLES."
742 msgid "Upper value (%g) is less than lower value (%g) on VARIABLES subcommand."
745 #: src/set.q:216 src/set.q:219 src/set.q:237 src/set.q:306 src/set.q:312
746 #: src/set.q:320 src/set.q:327 src/set.q:329 src/set.q:348 src/set.q:352
747 #: src/set.q:356 src/set.q:370 src/set.q:372 src/set.q:376 src/set.q:694
748 #: src/set.q:775 src/set.q:856
750 msgid "%s is obsolete."
754 msgid "Active file compression is not yet implemented (and probably won't be)."
758 msgid "CPI must be greater than 0."
762 msgid "LPI must be greater than 0."
767 "CASE is not implemented and probably won't be. If you care, complain about "
773 msgid "Value for MITERATE (%ld) must be greater than 0."
778 msgid "Value for MNEST (%ld) must be greater than 0."
782 msgid "MXERRS must be at least 1."
786 msgid "MXLOOPS must be at least 1."
790 msgid "TBFONTS not implemented."
794 msgid "TB1 not implemented."
800 "CC%c: Length of custom currency string `%s' (%d) exceeds maximum length of "
807 "CC%c: Custom currency string `%s' does not contain exactly three periods or "
812 msgid "LENGTH must be at least 1."
816 msgid "Missing identifier in RESULTS subcommand."
820 msgid "Unrecognized identifier in RESULTS subcommand."
824 msgid "WIDTH must be at least 1."
830 "FORMAT requires numeric output format as an argument. Specified format %s "
835 msgid "Text color must be in range 0-15."
839 msgid "Background color must be in range 0-7."
843 msgid "Border color must be in range 0-7."
847 msgid "Lower window color must be between 0 and 6."
851 msgid "Upper window color must be between 0 and 6."
855 msgid "Frame color must be between 0 and 6."
859 msgid "VIEWLENGTH not implemented."
863 msgid "Drive letter expected in WORKDEV subcommand."
867 msgid "Exactly one of TESTVAL, GROUPS or PAIRS subcommands is required"
871 msgid "VARIABLES subcommand is not appropriate with PAIRS"
874 #: src/t-test.q:207 src/t-test.q:276
876 msgid "`%s' is not a variable name"
881 msgid "Long string variable %s is not valid here."
886 "When applying GROUPS to a string variable, at least one value must be "
893 "PAIRED was specified but the number of variables preceding WITH (%d) did not "
894 "match the number following (%d)."
898 msgid "At least two variables must be specified on PAIRS."
902 msgid "One-Sample Statistics"
905 #: src/t-test.q:531 src/t-test.q:562 src/t-test.q:641 src/t-test.q:908
906 msgid "Std. Deviation"
909 #: src/t-test.q:532 src/t-test.q:563 src/t-test.q:642
914 msgid "Group Statistics"
918 msgid "Paired Sample Statistics"
921 #: src/t-test.q:665 src/t-test.q:940
927 msgid "Independent Samples Test"
931 msgid "Levine's Test for Equality of Variances"
935 msgid "t-test for Equality of Means"
946 #: src/t-test.q:808 src/t-test.q:912 src/t-test.q:997
950 #: src/t-test.q:810 src/t-test.q:914 src/t-test.q:999
951 msgid "Sig. (2-tailed)"
954 #: src/t-test.q:811 src/t-test.q:1000
955 msgid "Mean Difference"
959 msgid "Std. Error Difference"
962 #: src/t-test.q:819 src/t-test.q:898 src/t-test.q:985
964 msgid "%d%% Confidence Interval of the Difference"
968 msgid "Equal variances assumed"
972 msgid "Equal variances not assumed"
976 msgid "Paired Samples Test"
980 msgid "Paired Differences"
984 msgid "Std. Error Mean"
988 msgid "One-Sample Test"
993 msgid "Test Value = %f"
996 #: src/aggregate.c:188
997 msgid "OUTFILE specified multiple times."
1000 #: src/aggregate.c:214
1001 msgid "while expecting COLUMNWISE"
1004 #: src/aggregate.c:229
1005 msgid "BREAK specified multiple times."
1008 #: src/aggregate.c:258
1009 msgid "BREAK subcommand not specified."
1012 #: src/aggregate.c:494
1013 msgid "expecting aggregation function"
1016 #: src/aggregate.c:510
1018 msgid "Unknown aggregation function %s."
1021 #: src/aggregate.c:525
1022 msgid "expecting `('"
1025 #: src/aggregate.c:560
1027 msgid "Missing argument %d to %s."
1030 #: src/aggregate.c:568
1032 msgid "Arguments to %s must be of same type as source variables."
1035 #: src/aggregate.c:578 src/expr-prs.c:664
1036 msgid "expecting `)'"
1039 #: src/aggregate.c:590 src/autorecode.c:110
1042 "Number of source variables (%d) does not match number of target variables (%"
1046 #: src/aggregate.c:657
1049 "Variable name %s is not unique within the aggregate file dictionary, which "
1050 "contains the aggregate variables and the break variables."
1053 #: src/apply-dict.c:68
1055 msgid "Variable %s is %s in target file, but %s in source file."
1058 #: src/apply-dict.c:71 src/apply-dict.c:72 src/expr-prs.c:1127
1059 #: src/expr-prs.c:1472 src/expr-prs.c:1488 src/formats.c:103
1060 #: src/pfm-read.c:636 src/print.c:700 src/sfm-read.c:916 src/sfm-read.c:1042
1061 #: src/sfm-read.c:1043
1065 #: src/apply-dict.c:71 src/apply-dict.c:72 src/expr-prs.c:1127
1066 #: src/expr-prs.c:1469 src/expr-prs.c:1486 src/formats.c:103
1067 #: src/pfm-read.c:636 src/print.c:700 src/sfm-read.c:916 src/sfm-read.c:1042
1068 #: src/sfm-read.c:1043
1072 #: src/apply-dict.c:84
1074 msgid "Cannot add value labels from source file to long string variable %s."
1077 #: src/apply-dict.c:130
1080 "Cannot apply missing values from source file to long string variable %s."
1083 #: src/apply-dict.c:163
1084 msgid "No matching variables found between the source and target files."
1089 msgid "ASCII driver initializing as `%s'..."
1095 "ascii driver: Area of page excluding margins and headers must be at least 59 "
1096 "characters wide by 15 lines long. Page as configured is only %d characters "
1100 #: src/ascii.c:381 src/html.c:102 src/postscript.c:458
1102 msgid "%s: Initialization complete."
1105 #: src/ascii.c:392 src/html.c:114 src/postscript.c:471
1107 msgid "%s: Beginning closing..."
1110 #: src/ascii.c:402 src/html.c:119 src/postscript.c:490
1112 msgid "%s: Finished closing."
1118 "Bad index value for `box' key: syntax is box[INDEX], 0 <= INDEX < %d "
1119 "decimal, with INDEX expressed in base 4."
1124 msgid "Duplicate value for key `%s'."
1129 msgid "Unknown configuration parameter `%s' for ascii device driver."
1135 "Unknown character set `%s'. Valid character sets are `ascii' and `latin1'."
1141 "Unknown overstrike style `%s'. Valid overstrike styles are `single' and "
1148 "Unknown carriage return style `%s'. Valid carriage return styles are `cr' "
1152 #: src/ascii.c:522 src/postscript.c:680
1154 msgid "Positive integer required as value for `%s'."
1159 msgid "Zero or positive integer required as value for `%s'."
1162 #: src/ascii.c:623 src/postscript.c:639
1164 msgid "Boolean value expected for %s."
1167 #: src/ascii.c:655 src/ascii.c:670 src/ascii.c:687
1169 msgid "ASCII output driver: %s: %s"
1174 msgid "ascii_line_horz: bad hline (%d,%d),%d out of (%d,%d)\n"
1179 msgid "ascii_line_vert: bad vline %d,(%d,%d) out of (%d,%d)\n"
1184 msgid "ascii_line_intersection: bad intsct (%d,%d) out of (%d,%d)\n"
1189 msgid "%s: horiz=%d, vert=%d\n"
1194 msgid "Writing `%s': %s"
1197 #: src/ascii.c:1541 src/postscript.c:2095
1199 msgid "%s - Page %d"
1202 #: src/autorecode.c:131
1204 msgid "Target variable %s duplicates existing variable %s."
1207 #: src/autorecode.c:138
1209 msgid "Duplicate variable name %s among target variables."
1212 #: src/cmdline.c:112 src/cmdline.c:131 src/cmdline.c:143 src/command.c:196
1214 msgid "%s is not yet implemented."
1217 #: src/cmdline.c:157
1220 "Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.\n"
1221 "This is free software; see the source for copying conditions. There is NO\n"
1222 "WARRANTY; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n"
1224 "Written by Ben Pfaff <blp@gnu.org>."
1227 #: src/cmdline.c:217
1230 "PSPP, a program for statistical analysis of sample data.\n"
1232 "Usage: %s [OPTION]... FILE...\n"
1234 "If a long option shows an argument as mandatory, then it is mandatory\n"
1235 "for the equivalent short option also. Similarly for optional arguments.\n"
1238 " -B, --config-dir=DIR set configuration directory to DIR\n"
1239 " -o, --device=DEVICE select output driver DEVICE and disable "
1241 " -d, --define=VAR[=VALUE] set environment variable VAR to VALUE, or empty\n"
1242 " -u, --undef=VAR undefine environment variable VAR\n"
1244 "Input and output:\n"
1245 " -f, --out-file=FILE send output to FILE (overwritten)\n"
1246 " -p, --pipe read script from stdin, send output to stdout\n"
1247 " -I-, --no-include clear include path\n"
1248 " -I, --include=DIR append DIR to include path\n"
1249 " -c, --command=COMMAND execute COMMAND before .pspp/rc at startup\n"
1251 "Language modifiers:\n"
1252 " -i, --interactive interpret scripts in interactive mode\n"
1253 " -n, --edit just check syntax; don't actually run the code\n"
1254 " -r, --no-statrc disable execution of .pspp/rc at startup\n"
1255 " -s, --safer don't allow some unsafe operations\n"
1257 "Informative output:\n"
1258 " -h, --help print this help, then exit\n"
1259 " -l, --list print a list of known driver classes, then exit\n"
1260 " -V, --version show PSPP version, then exit\n"
1261 " -v, --verbose increments verbosity level\n"
1263 "Non-option arguments:\n"
1264 " FILE1 FILE2 run FILE1, clear the dictionary, run FILE2\n"
1265 " FILE1 + FILE2 run FILE1 then FILE2 without clearing "
1267 " KEY=VALUE overrides macros in output initialization file\n"
1271 #: src/cmdline.c:249
1275 "Report bugs to <%s>.\n"
1278 #: src/command.c:134
1280 msgid "%s not allowed inside FILE TYPE/END FILE TYPE."
1283 #: src/command.c:138
1285 msgid "%s not allowed inside FILE TYPE GROUPED/END FILE TYPE."
1288 #: src/command.c:141
1289 msgid "RECORD TYPE must be the first command inside a FILE TYPE structure."
1292 #: src/command.c:186
1293 msgid "This line does not begin with a valid command name."
1296 #: src/command.c:214
1299 "%s is not allowed (1) before a command to specify the input program, such as "
1300 "DATA LIST, (2) between FILE TYPE and END FILE TYPE, (3) between INPUT "
1301 "PROGRAM and END INPUT PROGRAM."
1304 #: src/command.c:218
1306 msgid "%s is not allowed within an input program."
1309 #: src/command.c:219 src/command.c:220
1311 msgid "%s is only allowed within an input program."
1314 #: src/command.c:229
1316 msgid "%s command beginning\n"
1319 #: src/command.c:265
1322 "%s command completed\n"
1326 #: src/command.c:280
1327 msgid "The identifier(s) specified do not form a valid command name:"
1330 #: src/command.c:283
1331 msgid "The identifier(s) specified do not form a complete command name:"
1334 #: src/command.c:407
1336 "This command is not accepted in a syntax file. Instead, use FINISH to "
1337 "terminate a syntax file."
1340 #: src/command.c:425
1342 "This command is not executed in interactive mode. Instead, PSPP drops down "
1343 "to the command prompt. Use EXIT if you really want to quit."
1346 #: src/command.c:516
1347 msgid "The sentinel may not be the empty string."
1350 #: src/command.c:573
1351 msgid "This command not allowed when the SAFER option is set."
1354 #: src/command.c:596
1356 msgid "Error removing `%s': %s."
1359 #: src/command.c:646
1361 msgid "Couldn't fork: %s."
1364 #: src/command.c:687
1366 msgid "Error executing command: %s."
1369 #: src/command.c:733
1370 msgid "No operating system support for this command."
1373 #: src/command.c:762
1374 msgid "This command is not valid in a syntax file."
1377 #: src/compute.c:141 src/compute.c:200
1380 "When executing COMPUTE: SYSMIS is not a valid value as an index into vector %"
1384 #: src/compute.c:144 src/compute.c:204
1387 "When executing COMPUTE: %g is not a valid value as an index into vector %s."
1390 #: src/compute.c:343
1392 msgid "There is no vector named %s."
1395 #: src/compute.c:449
1396 msgid "Extra characters after expression."
1400 msgid "Destination cannot be a string variable."
1406 "%g THRU %g is not a valid range. The number following THRU must be at least "
1407 "as big as the number preceding THRU."
1411 msgid "data-file error: "
1421 msgid "(columns %d-%d"
1426 msgid ", field type %s) "
1429 #: src/data-in.c:223
1430 msgid "Field contents followed by garbage."
1433 #: src/data-in.c:256
1434 msgid "Overflow in floating-point constant."
1437 #: src/data-in.c:262
1438 msgid "Underflow in floating-point constant."
1441 #: src/data-in.c:268
1442 msgid "Field does not form a valid floating-point constant."
1445 #: src/data-in.c:294
1446 msgid "All characters in field must be digits."
1449 #: src/data-in.c:319
1450 msgid "Unrecognized character in field."
1453 #: src/data-in.c:337 src/data-in.c:587
1454 msgid "Field must have even length."
1457 #: src/data-in.c:347 src/data-in.c:597
1458 msgid "Field must contain only hex digits."
1461 #: src/data-in.c:385
1464 "Quality of zoned decimal (Z) input format code is suspect. Check your "
1465 "results three times. Report bugs to %s."
1468 #: src/data-in.c:397
1469 msgid "Zoned decimal field contains fewer than 2 characters."
1472 #: src/data-in.c:405
1473 msgid "Bad sign byte in zoned decimal number."
1476 #: src/data-in.c:422
1477 msgid "Format error in zoned decimal number."
1480 #: src/data-in.c:436
1481 msgid "Error in syntax of zoned decimal number."
1484 #: src/data-in.c:637
1485 msgid "Unexpected end of field."
1488 #: src/data-in.c:663
1489 msgid "Digit expected in field."
1492 #: src/data-in.c:688
1494 msgid "Day (%ld) must be between 1 and 31."
1497 #: src/data-in.c:713
1498 msgid "Delimiter expected between fields in date."
1501 #: src/data-in.c:810
1503 msgid "Month (%ld) must be between 1 and 12."
1506 #: src/data-in.c:851
1508 msgid "Month (%s) must be between I and XII."
1511 #: src/data-in.c:878
1513 msgid "Month name (%s...) is too long."
1516 #: src/data-in.c:889
1518 msgid "Bad month name (%s)."
1521 #: src/data-in.c:905
1523 msgid "Year (%ld) must be between 1582 and 19999."
1526 #: src/data-in.c:916
1528 msgid "Trailing garbage \"%s\" following date."
1531 #: src/data-in.c:931
1533 msgid "Julian day (%d) must be between 1 and 366."
1536 #: src/data-in.c:943
1538 msgid "Year (%d) must be between 1582 and 19999."
1541 #: src/data-in.c:959
1543 msgid "Quarter (%ld) must be between 1 and 4."
1546 #: src/data-in.c:969
1547 msgid "`Q' expected between quarter and year."
1550 #: src/data-in.c:985
1552 msgid "Week (%ld) must be between 1 and 53."
1555 #: src/data-in.c:996
1556 msgid "`WK' expected between week and year."
1559 #: src/data-in.c:1019
1560 msgid "Delimiter expected between fields in time."
1563 #: src/data-in.c:1031
1565 msgid "Hour (%ld) must be positive."
1568 #: src/data-in.c:1043
1570 msgid "Minute (%ld) must be between 0 and 59."
1573 #: src/data-in.c:1090
1575 msgid "Hour (%ld) must be between 0 and 23."
1578 #: src/data-in.c:1104 src/data-in.c:1139
1579 msgid "Day of the week expected in date value."
1582 #: src/data-in.c:1190
1583 msgid "Date is not in valid range between 15 Oct 1582 and 31 Dec 19999."
1586 #: src/data-in.c:1512
1588 msgid "Field too long (%d characters). Truncated after character %d."
1591 #: src/data-list.c:137
1593 "DATA LIST may not use a different file from that specified on its "
1594 "surrounding FILE TYPE."
1597 #: src/data-list.c:156
1598 msgid "The END subcommand may only be specified once."
1601 #: src/data-list.c:195
1602 msgid "Only one of FIXED, FREE, or LIST may be specified."
1605 #: src/data-list.c:321 src/print.c:301
1608 "The record number specified, %ld, is before the previous record, %d. Data "
1609 "fields must be listed in order of increasing record number."
1612 #: src/data-list.c:353 src/data-list.c:1634
1614 "SPSS-like or FORTRAN-like format specification expected after variable names."
1617 #: src/data-list.c:364 src/print.c:333
1619 "Variables are specified on records that should not exist according to "
1620 "RECORDS subcommand."
1623 #: src/data-list.c:396 src/data-list.c:409 src/print.c:510 src/print.c:523
1624 msgid "Column positions for fields must be positive."
1627 #: src/data-list.c:414
1628 msgid "The ending column for a field must be greater than the starting column."
1631 #: src/data-list.c:438 src/print.c:551
1632 msgid "A format specifier on this line has extra characters on the end."
1635 #: src/data-list.c:453 src/print.c:567
1636 msgid "The value for number of decimal places must be at least 1."
1639 #: src/data-list.c:467 src/print.c:580
1641 msgid "Input format %s doesn't accept decimal places."
1644 #: src/data-list.c:488 src/print.c:600
1646 msgid "The %d columns %d-%d can't be evenly divided into %d fields."
1649 #: src/data-list.c:528 src/data-list.c:625 src/data-list.c:825
1651 msgid "%s is a duplicate variable name."
1654 #: src/data-list.c:533
1656 msgid "There is already a variable %s of a different type."
1659 #: src/data-list.c:540
1661 msgid "There is already a string variable %s of a different width."
1664 #: src/data-list.c:614 src/print.c:689
1666 "The number of format specifications exceeds the number of variable names "
1670 #: src/data-list.c:698 src/print.c:773
1672 "There aren't enough format specifications to match the number of variable "
1676 #: src/data-list.c:733 src/print.c:806
1680 #: src/data-list.c:734 src/print.c:807
1684 #: src/data-list.c:735 src/data-list.c:870 src/print.c:808
1688 #: src/data-list.c:758
1690 msgid "Reading %d record from file %s."
1691 msgid_plural "Reading %d records from file %s."
1695 #: src/data-list.c:761
1697 msgid "Reading %d record from the command file."
1698 msgid_plural "Reading %d records from the command file."
1702 #: src/data-list.c:768 src/data-list.c:769
1703 msgid "Occurrence data specifications."
1706 #: src/data-list.c:893
1708 msgid "Reading free-form data from file %s."
1711 #: src/data-list.c:894
1712 msgid "Reading free-form data from the command file."
1715 #: src/data-list.c:945 src/matrix-data.c:939
1716 msgid "Scope of string exceeds line."
1719 #: src/data-list.c:1006
1720 msgid "Attempt to read past end of file."
1723 #: src/data-list.c:1035
1724 msgid "abort in write_case()\n"
1727 #: src/data-list.c:1063
1729 msgid "Partial case of %d of %d records discarded."
1732 #: src/data-list.c:1112
1734 msgid "Partial case discarded. The first variable missing was %s."
1737 #: src/data-list.c:1153
1740 "Missing value(s) for all variables from %s onward. These will be filled "
1741 "with the system-missing value or blanks, as appropriate."
1744 #: src/data-list.c:1311
1746 "REPEATING DATA must use the same file as its corresponding DATA LIST or FILE "
1750 #: src/data-list.c:1321
1751 msgid "STARTS subcommand given multiple times."
1754 #: src/data-list.c:1345
1756 msgid "STARTS beginning column (%d) exceeds STARTS ending column (%d)."
1759 #: src/data-list.c:1356
1760 msgid "OCCURS subcommand given multiple times."
1763 #: src/data-list.c:1369
1764 msgid "LENGTH subcommand given multiple times."
1767 #: src/data-list.c:1382
1768 msgid "CONTINUED subcommand given multiple times."
1771 #: src/data-list.c:1401
1773 msgid "CONTINUED beginning column (%d) exceeds CONTINUED ending column (%d)."
1776 #: src/data-list.c:1415
1777 msgid "ID subcommand given multiple times."
1780 #: src/data-list.c:1424
1782 msgid "ID beginning column (%ld) must be positive."
1785 #: src/data-list.c:1439
1787 msgid "ID ending column (%ld) must be positive."
1790 #: src/data-list.c:1445
1792 msgid "ID ending column (%ld) cannot be less than ID beginning column (%d)."
1795 #: src/data-list.c:1484
1796 msgid "Missing required specification STARTS."
1799 #: src/data-list.c:1486
1800 msgid "Missing required specification OCCURS."
1803 #: src/data-list.c:1493
1804 msgid "ID specified without CONTINUED."
1807 #: src/data-list.c:1581
1808 msgid "String variable not allowed here."
1811 #: src/data-list.c:1591
1813 msgid "%s (%d) must be at least 1."
1816 #: src/data-list.c:1597
1818 msgid "Variable or integer expected for %s."
1821 #: src/data-list.c:1736
1823 msgid "Mismatched case ID (%s). Expected value was %s."
1826 #: src/data-list.c:1768
1829 "Variable %s starting in column %d extends beyond physical record length of %"
1833 #: src/data-list.c:1836
1835 msgid "Invalid value %d for OCCURS."
1838 #: src/data-list.c:1842
1840 msgid "Beginning column for STARTS (%d) must be at least 1."
1843 #: src/data-list.c:1850
1845 msgid "Ending column for STARTS (%d) is less than beginning column (%d)."
1848 #: src/data-list.c:1858
1850 msgid "Invalid value %d for LENGTH."
1853 #: src/data-list.c:1865
1855 msgid "Beginning column for CONTINUED (%d) must be at least 1."
1858 #: src/data-list.c:1873
1860 msgid "Ending column for CONTINUED (%d) is less than beginning column (%d)."
1863 #: src/data-list.c:1896
1866 "Number of repetitions specified on OCCURS (%d) exceed number of repetitions "
1867 "available in space on STARTS (%d), and CONTINUED not specified."
1870 #: src/data-list.c:1913
1872 msgid "Unexpected end of file with %d repetitions remaining out of %d."
1875 #: src/data-out.c:143 src/sfm-read.c:470 src/sysfile-info.c:116
1879 #: src/data-out.c:251
1881 "The N output format cannot be used to output a negative number or the system-"
1885 #: src/data-out.c:362
1888 "Quality of zoned decimal (Z) output format code is suspect. Check your "
1889 "results. Report bugs to %s."
1892 #: src/data-out.c:369
1893 msgid "The system-missing value cannot be output as a zoned decimal number."
1896 #: src/data-out.c:382
1898 msgid "Number %g too big to fit in field with format Z%d.%d."
1901 #: src/data-out.c:774
1903 msgid "Time value %g too large in magnitude to convert to alphanumeric time."
1906 #: src/data-out.c:827
1908 msgid "Weekday index %d does not lie between 1 and 7."
1911 #: src/data-out.c:848
1913 msgid "Month index %d does not lie between 1 and 12."
1916 #: src/data-out.c:960
1919 "Year %d cannot be represented in four digits for output formatting purposes."
1924 msgid "%s: Closing data-file handle %s."
1928 msgid "<<Bug in dfm.c>>"
1933 msgid "%s: Opening data-file handle %s for reading."
1936 #: src/dfm.c:135 src/dfm.c:152
1937 msgid "BEGIN DATA expected."
1942 msgid "An error occurred while opening \"%s\" for reading as a data file: %s."
1947 msgid "%s: Opening data-file handle %s for writing."
1951 msgid "Cannot open the inline file for writing."
1956 msgid "An error occurred while opening \"%s\" for writing as a data file: %s."
1961 "Unexpected end-of-file while reading data in BEGIN DATA. This probably "
1962 "indicates a missing or misformatted END DATA command. END DATA must appear "
1963 "by itself on a single line with exactly one space between words."
1966 #: src/dfm.c:400 src/dfm.c:421
1968 msgid "Error reading file %s: %s."
1973 msgid "%s: Partial record at end of file."
1978 msgid "Cannot read from file %s already opened for %s."
1983 msgid "Attempt to read beyond end-of-file on file %s."
1988 msgid "Cannot write to file %s already opened for %s."
1993 msgid "Error writing file %s: %s."
1998 "This command is not valid here since the current input program does not "
1999 "access the inline file."
2003 msgid "inline file: Opening for reading."
2007 msgid "Skipping remaining inline data."
2011 msgid "reading as a data file"
2015 msgid "writing as a data file"
2019 msgid "There is no DO IF to match with this ELSE IF."
2023 msgid "The ELSE command must follow all ELSE IF commands in a DO IF structure."
2027 msgid "End of command expected."
2031 msgid "There is no DO IF to match with this ELSE."
2036 "There may be at most one ELSE clause in each DO IF structure. It must be "
2041 msgid "There is no DO IF to match with this END IF."
2046 msgid "DO IF %d: true\n"
2051 msgid "DO IF %d: false\n"
2056 msgid "DO IF %d: missing\n"
2060 msgid "Terminating NOW due to a fatal error!"
2064 msgid "Terminating execution of syntax file due to error."
2069 msgid "Errors (%d) exceeds limit (%d)."
2074 msgid "Warnings (%d) exceed limit (%d)."
2081 #: src/error.c:255 src/error.c:262 src/error.c:265 src/expr-prs.c:1463
2085 #: src/error.c:256 src/error.c:263 src/error.c:266
2089 #: src/error.c:257 src/error.c:267
2093 #: src/error.c:259 src/error.c:260
2094 msgid "installation error"
2097 #: src/expr-evl.c:1164
2099 "A number being treated as a Boolean in an expression was found to have a "
2100 "value other than 0 (false), 1 (true), or the system-missing value. The "
2101 "result was forced to 0."
2104 #: src/expr-evl.c:1208
2107 "SYSMIS is not a valid index value for vector %s. The result will be set to "
2111 #: src/expr-evl.c:1212
2114 "%g is not a valid index value for vector %s. The result will be set to "
2118 #: src/expr-evl.c:1230
2121 "SYSMIS is not a valid index value for vector %s. The result will be set to "
2125 #: src/expr-evl.c:1235
2128 "%g is not a valid index value for vector %s. The result will be set to the "
2132 #: src/expr-evl.c:1340
2134 msgid "evaluate_expression(): not implemented: %s\n"
2137 #: src/expr-evl.c:1343
2139 msgid "evaluate_expression(): not implemented: %d\n"
2142 #: src/expr-opt.c:662
2144 "While optimizing a constant expression, there was a bad value for the third "
2145 "argument to INDEX."
2148 #: src/expr-opt.c:687
2150 "While optimizing a constant expression, there was a bad value for the third "
2151 "argument to RINDEX."
2154 #: src/expr-opt.c:746
2156 msgid "Third argument to %cPAD() must be at least one character in length."
2159 #: src/expr-opt.c:779
2161 msgid "Second argument to %cTRIM() must be at least one character in length."
2164 #: src/expr-opt.c:880
2166 "When optimizing a constant expression, an integer that was being used as an "
2167 "Boolean value was found to have a constant value other than 0, 1, or SYSMIS."
2170 #: src/expr-prs.c:140
2172 "A string expression was supplied in a place where a Boolean expression was "
2176 #: src/expr-prs.c:151
2178 "A numeric expression was expected in a place where one was not supplied."
2181 #: src/expr-prs.c:159
2182 msgid "A string expression was expected in a place where one was not supplied."
2185 #: src/expr-prs.c:173
2186 msgid "The OR operator cannot take string operands."
2189 #: src/expr-prs.c:221
2190 msgid "The AND operator cannot take string operands."
2193 #: src/expr-prs.c:270
2194 msgid "The NOT operator cannot take a string operand."
2197 #: src/expr-prs.c:297
2199 "Strings cannot be compared with numeric or Boolean values with the "
2200 "relational operators = >= > <= < <>."
2203 #: src/expr-prs.c:354
2204 msgid "The `+' and `-' operators may only be used with numeric operands."
2207 #: src/expr-prs.c:406
2208 msgid "The `*' and `/' operators may only be used with numeric operands."
2211 #: src/expr-prs.c:457
2212 msgid "The unary minus (-) operator can only take a numeric operand."
2215 #: src/expr-prs.c:487
2216 msgid "Both operands to the ** operator must be numeric."
2219 #: src/expr-prs.c:581
2220 msgid "Use of $LENGTH is obsolete, returning default of 66."
2223 #: src/expr-prs.c:586
2224 msgid "Use of $WIDTH is obsolete, returning default of 131."
2227 #: src/expr-prs.c:591
2229 msgid "Unknown system variable %s."
2232 #: src/expr-prs.c:630
2233 msgid "expecting variable name"
2236 #: src/expr-prs.c:672
2237 msgid "in expression"
2240 #: src/expr-prs.c:853
2241 msgid "Argument 2 to LAG must be a small positive integer constant."
2244 #: src/expr-prs.c:926 src/expr-prs.c:965
2247 "Type mismatch in argument %d of %s, which was expected to be of %s type. It "
2248 "was actually of %s type. "
2251 #: src/expr-prs.c:952
2253 msgid "%s cannot take Boolean operands."
2256 #: src/expr-prs.c:984
2257 msgid "in function call"
2260 #: src/expr-prs.c:998
2261 msgid "RANGE requires an odd number of arguments, but at least three."
2264 #: src/expr-prs.c:1008
2266 msgid "%s requires at least two arguments."
2269 #: src/expr-prs.c:1023
2271 msgid "%s.%d requires at least %d arguments."
2274 #: src/expr-prs.c:1065
2277 "Argument %d to CONCAT is type %s. All arguments to CONCAT must be strings."
2280 #: src/expr-prs.c:1124
2283 "Argument %d to %s was expected to be of %s type. It was actually of type %s."
2286 #: src/expr-prs.c:1143
2288 msgid "%s is not a numeric format."
2291 #: src/expr-prs.c:1169
2293 msgid "Too few arguments to function %s."
2296 #: src/expr-prs.c:1201
2299 "Type mismatch in argument %d of %s, which was expected to be numeric. It "
2300 "was actually type %s."
2303 #: src/expr-prs.c:1210
2305 msgid "Missing comma following argument %d of %s."
2308 #: src/expr-prs.c:1248
2309 msgid "The index value after a vector name must be numeric."
2312 #: src/expr-prs.c:1255
2313 msgid "`)' expected after a vector index value."
2316 #: src/expr-prs.c:1288
2318 msgid "There is no function named %s."
2321 #: src/expr-prs.c:1293
2323 msgid "Function %s may not be given a minimum number of arguments."
2326 #: src/expr-prs.c:1302
2328 msgid "expecting `)' after %s function"
2331 #: src/expr-prs.c:1466
2335 #: src/expr-prs.c:1695
2337 msgid "!!TERMINAL!!"
2340 #: src/expr-prs.c:1721
2342 msgid "!!SENTINEL!!"
2345 #: src/expr-prs.c:1724
2350 #: src/expr-prs.c:1742
2354 #: src/file-type.c:126
2355 msgid "MIXED, GROUPED, or NESTED expected."
2358 #: src/file-type.c:149
2359 msgid "The CASE subcommand is not valid on FILE TYPE MIXED."
2362 #: src/file-type.c:167
2363 msgid "WARN or NOWARN expected after WILD."
2366 #: src/file-type.c:175
2367 msgid "The DUPLICATE subcommand is not valid on FILE TYPE MIXED."
2370 #: src/file-type.c:189
2371 msgid "DUPLICATE=CASE is only valid on FILE TYPE NESTED."
2374 #: src/file-type.c:198
2376 msgid "WARN%s expected after DUPLICATE."
2379 #: src/file-type.c:199
2380 msgid ", NOWARN, or CASE"
2383 #: src/file-type.c:200
2387 #: src/file-type.c:208
2388 msgid "The MISSING subcommand is not valid on FILE TYPE MIXED."
2391 #: src/file-type.c:220
2392 msgid "WARN or NOWARN after MISSING."
2395 #: src/file-type.c:228
2396 msgid "ORDERED is only valid on FILE TYPE GROUPED."
2399 #: src/file-type.c:239
2400 msgid "YES or NO expected after ORDERED."
2403 #: src/file-type.c:245 src/file-type.c:548 src/get.c:343
2404 msgid "while expecting a valid subcommand"
2407 #: src/file-type.c:252
2408 msgid "The required RECORD subcommand was not present."
2411 #: src/file-type.c:260
2412 msgid "The required CASE subcommand was not present."
2415 #: src/file-type.c:266
2416 msgid "CASE and RECORD must specify different variable names."
2419 #: src/file-type.c:315
2420 msgid "Column value must be positive."
2423 #: src/file-type.c:330
2424 msgid "Ending column precedes beginning column."
2427 #: src/file-type.c:349
2428 msgid "Bad format specifier name."
2431 #: src/file-type.c:410 src/file-type.c:569
2433 "This command may only appear within a FILE TYPE/END FILE TYPE structure."
2436 #: src/file-type.c:417
2437 msgid "OTHER may appear only on the last RECORD TYPE command."
2440 #: src/file-type.c:427
2441 msgid "No input commands (DATA LIST, REPEATING DATA) for above RECORD TYPE."
2444 #: src/file-type.c:481
2446 "The CASE subcommand is not allowed on the RECORD TYPE command for FILE TYPE "
2450 #: src/file-type.c:491
2452 "No variable name may be specified for the CASE subcommand on RECORD TYPE."
2455 #: src/file-type.c:499
2457 "The CASE column specification on RECORD TYPE must give a format specifier "
2458 "that is the same type as that of the CASE column specification given on FILE "
2462 #: src/file-type.c:515
2463 msgid "WARN or NOWARN expected on DUPLICATE subcommand."
2466 #: src/file-type.c:529
2467 msgid "WARN or NOWARN expected on MISSING subcommand."
2470 #: src/file-type.c:542
2471 msgid "YES or NO expected on SPREAD subcommand."
2474 #: src/file-type.c:582
2475 msgid "No input commands (DATA LIST, REPEATING DATA) on above RECORD TYPE."
2478 #: src/file-type.c:589
2479 msgid "No commands between FILE TYPE and END FILE TYPE."
2482 #: src/file-type.c:654
2484 msgid "Unknown record type \"%.*s\"."
2487 #: src/file-type.c:678
2489 msgid "Unknown record type %g."
2492 #: src/filename.c:221
2494 msgid "Searching for `%s'..."
2497 #: src/filename.c:229 src/filename.c:261
2498 msgid "Search unsuccessful!"
2501 #: src/filename.c:254
2506 #: src/filename.c:669
2508 msgid "Not opening pipe file `%s' because SAFER option set."
2513 msgid "Could not create acceptable variant for variable %s."
2517 msgid "Cannot create more than 99999 variable names."
2522 msgid "Error reading FLIP source file: %s."
2526 msgid "Could not create temporary file for FLIP."
2529 #: src/flip.c:379 src/flip.c:398
2531 msgid "Error writing FLIP file: %s."
2535 msgid "Error creating FLIP source file."
2540 msgid "Error rewinding FLIP file: %s."
2545 msgid "Error reading FLIP file: %s."
2550 msgid "Error seeking FLIP source file: %s."
2555 msgid "Error writing FLIP source file: %s."
2560 msgid "Error rewind FLIP source file: %s."
2564 msgid "X and T format specifiers not allowed here."
2569 msgid "%s is not a valid data format."
2574 msgid "Format %s may not be used as an input format."
2580 "Input format %s specifies a bad width %d. Format %s requires a width "
2581 "between %d and %d."
2587 "Input format %s specifies an odd width %d, but format %s requires an even "
2588 "width between %d and %d."
2594 "Input format %s specifies a bad number of implied decimal places %d. Input "
2595 "format %s allows up to 16 implied decimal places."
2601 "Output format %s specifies a bad width %d. Format %s requires a width "
2602 "between %d and %d."
2608 "Output format %s requires minimum width %d to allow %d decimal places. Try %"
2609 "s%d.%d instead of %s."
2615 "Output format %s specifies an odd width %d, but output format %s requires an "
2616 "even width between %d and %d."
2622 "Output format %s specifies a bad number of implied decimal places %d. "
2623 "Output format %s allows a number of implied decimal places between 1 and 16."
2628 msgid "Can't display a string variable of width %d with format specifier %s."
2632 msgid "Format specifier expected."
2637 msgid "Data format %s does not specify a width."
2642 msgid "Data format %s is not valid."
2646 msgid "`(' expected after variable list"
2649 #: src/formats.c:102
2651 msgid "Format %s may not be assigned to a %s variable."
2654 #: src/formats.c:123 src/numeric.c:66 src/numeric.c:139
2655 msgid "`)' expected after output format."
2658 #: src/formats.c:153
2663 #: src/formats.c:154
2665 msgid " Name Print Write\n"
2670 msgid "GET translation table from file to memory:\n"
2673 #: src/get.c:115 src/get.c:1398
2675 msgid " %8s from %3d,%3d to %3d,%3d\n"
2679 msgid "All variables deleted from system file dictionary."
2685 "Cannot rename %s as %s because there already exists a variable named %s. To "
2686 "rename variables with overlapping names, use a single RENAME subcommand such "
2687 "as \"/RENAME (A=B)(B=C)(C=A)\", or equivalently, \"/RENAME (A B C=B C A)\"."
2691 msgid "`=' expected after variable list."
2697 "Number of variables on left side of `=' (%d) does not match number of "
2698 "variables on right side (%d), in parenthesized group %d of RENAME subcommand."
2703 msgid "Requested renaming duplicates variable name %s."
2710 "Variables in dictionary:\n"
2714 msgid "The BY subcommand may be given once at most."
2718 msgid "The active file may not be specified more than once."
2722 msgid "Cannot specify the active file since no active file has been defined."
2727 "IN, FIRST, and LAST subcommands may not occur before the first FILE or TABLE."
2732 msgid "Multiple %s subcommands for a single FILE or TABLE."
2737 msgid "Duplicate variable name %s while creating %s variable."
2742 "RENAME, KEEP, and DROP subcommands may not occur before the first FILE or "
2747 msgid "The BY subcommand is required when a TABLE subcommand is given."
2752 msgid "File %s lacks BY variable %s."
2758 "Variable %s in file %s (%s) has different type or width from the same "
2759 "variable in earlier file (%s)."
2763 msgid "expecting COMM or TAPE"
2768 msgid "IMPORT translation table from file to memory:\n"
2771 #: src/getline.c:161
2773 msgid "Can't find `%s' in include file search path."
2776 #: src/getline.c:316
2778 msgid "%s: Opening as syntax file."
2781 #: src/getline.c:321
2783 msgid "Opening `%s': %s."
2786 #: src/getline.c:330 src/html.c:330 src/postscript.c:1463
2788 msgid "Reading `%s': %s."
2791 #: src/getline.c:388
2793 msgid "Closing `%s': %s."
2801 msgid "Specify a terminal type with `setenv TERM <yourtype>'."
2805 msgid "Could not access the termcap data base."
2810 msgid "Terminal type `%s' is not defined."
2814 msgid "Assuming screen of size 79x25."
2817 #: src/groff-font.c:107
2819 msgid "%s: Opening Groff font file..."
2822 #: src/groff-font.c:161
2823 msgid "Missing font name."
2826 #: src/groff-font.c:171
2827 msgid "Missing encoding filename."
2830 #: src/groff-font.c:184
2831 msgid "Bad spacewidth value."
2834 #: src/groff-font.c:196
2835 msgid "Bad slant value."
2838 #: src/groff-font.c:221
2840 msgid "Unknown ligature `%s'."
2843 #: src/groff-font.c:256
2844 msgid "Unexpected end of line reading character set."
2847 #: src/groff-font.c:264
2848 msgid "Can't use ditto mark for first character."
2851 #: src/groff-font.c:269
2852 msgid "Can't ditto into an unnamed character."
2855 #: src/groff-font.c:286
2857 msgid "Missing metrics for character `%s'."
2860 #: src/groff-font.c:295
2862 msgid "Missing type for character `%s'."
2865 #: src/groff-font.c:304
2867 msgid "Missing code for character `%s'."
2870 #: src/groff-font.c:323
2871 msgid "Malformed kernpair."
2874 #: src/groff-font.c:330
2875 msgid "Unexpected end of line reading kernpairs."
2878 #: src/groff-font.c:336
2879 msgid "Bad kern value."
2882 #: src/groff-font.c:368
2884 msgid "Font read successfully with internal name %s."
2887 #: src/groff-font.c:389
2888 msgid "Error reading font."
2891 #: src/groff-font.c:400
2892 msgid "installation error: Groff font error: "
2895 #: src/groff-font.c:425
2897 msgid "Bad character \\%3o."
2900 #: src/groff-font.c:665
2902 msgid "Groff font error: Cannot find \"%s\"."
2905 #: src/groff-font.c:730
2907 msgid "%s: Opening Groff description file..."
2910 #: src/groff-font.c:746
2911 msgid "Multiple `sizes' declarations."
2914 #: src/groff-font.c:763
2915 msgid "Unexpected end of file. Missing 0 terminator to `sizes' command?"
2918 #: src/groff-font.c:775 src/groff-font.c:782 src/groff-font.c:795
2919 msgid "Bad argument to `sizes'."
2922 #: src/groff-font.c:787
2923 msgid "Bad range in argument to `sizes'."
2926 #: src/groff-font.c:816
2927 msgid "Family name expected."
2930 #: src/groff-font.c:821
2931 msgid "This command already specified."
2934 #: src/groff-font.c:841
2936 msgid "%s: Device characteristic already defined."
2939 #: src/groff-font.c:847
2941 msgid "%s: Invalid numeric format."
2944 #: src/groff-font.c:877
2945 msgid "Missing `res', `unitwidth', and/or `sizes' line(s)."
2948 #: src/groff-font.c:903
2949 msgid "Description file read successfully."
2952 #: src/groff-font.c:935
2953 msgid "Error reading description file."
2956 #: src/groff-font.c:992
2957 msgid "<<fallback>>"
2967 msgid "bad ordering of keys %d and %d\n"
2972 msgid "Heap contents:\n"
2977 msgid "HTML driver initializing as `%s'..."
2982 msgid "Unknown configuration parameter `%s' for HTML device driver."
2987 "Cannot find HTML prologue. The use of `-vv' on the command line is "
2988 "suggested as a debugging aid."
2993 msgid "%s: %s: Opening HTML prologue..."
2996 #: src/html.c:268 src/html.c:279 src/postscript.c:1355 src/postscript.c:1366
3000 #: src/html.c:275 src/html.c:280 src/postscript.c:1362 src/postscript.c:1367
3006 msgid "%s: HTML prologue read successfully."
3011 msgid "%s: Error reading HTML prologue."
3016 msgid "HTML output driver: %s: %s"
3020 msgid "Unrecognized filename format."
3023 #: src/inpt-pgm.c:83
3024 msgid "No matching INPUT PROGRAM command."
3027 #: src/inpt-pgm.c:88
3029 "No data-input or transformation commands specified between INPUT PROGRAM and "
3030 "END INPUT PROGRAM."
3033 #: src/inpt-pgm.c:265 src/inpt-pgm.c:408
3035 "This command may only be executed between INPUT PROGRAM and END INPUT "
3039 #: src/inpt-pgm.c:324
3040 msgid "COLUMN subcommand multiply specified."
3043 #: src/inpt-pgm.c:338
3044 msgid "expecting file handle name"
3047 #: src/inpt-pgm.c:381
3049 "REREAD: Column numbers must be positive finite numbers. Column set to 1."
3054 msgid "%s does not form a valid number."
3059 msgid "Bad character in input: `%c'."
3064 msgid "Bad character in input: `\\%o'."
3068 msgid "Syntax error at end of file."
3073 msgid "Syntax error %s at `%s'."
3078 msgid "Syntax error at `%s'."
3083 msgid "expecting `%s'"
3088 msgid "expecting %s"
3092 msgid "expecting string"
3096 msgid "expecting integer"
3100 msgid "expecting number"
3104 msgid "expecting identifier"
3108 msgid "The rest of this command has been discarded."
3111 #: src/lexer.c:842 src/print.c:1174
3116 #: src/lexer.c:968 src/pfm-read.c:132 src/repeat.c:226
3117 msgid "Unexpected end of file."
3134 msgid "String of %s digits has %d characters, which is not a multiple of %d."
3139 msgid "`%c' is not a valid %s digit."
3143 msgid "Unterminated string constant."
3148 msgid "String exceeds 255 characters in length (%d characters)."
3153 "Sorry, literal strings may not contain null characters. Replacing with "
3158 msgid "The index variable may not be a string variable."
3162 msgid "There is no LOOP command that corresponds to this END LOOP."
3167 "This command may only appear enclosed in a LOOP/END LOOP control structure."
3171 msgid "BREAK not enclosed in DO IF structure."
3176 msgid "%s without %s."
3180 msgid "Error initializing output drivers."
3184 msgid "This command not executed."
3189 "Skipping the rest of this command. Part of this command may have been "
3195 "Skipping the rest of this command. This command was fully executed up to "
3201 "Trailing garbage was encountered following this command. The command was "
3202 "fully executed to this point."
3205 #: src/matrix-data.c:186
3206 msgid "VARIABLES subcommand multiply specified."
3209 #: src/matrix-data.c:201
3210 msgid "VARNAME_ cannot be explicitly specified on VARIABLES."
3213 #: src/matrix-data.c:267
3214 msgid "in FORMAT subcommand"
3217 #: src/matrix-data.c:278
3218 msgid "SPLIT subcommand multiply specified."
3221 #: src/matrix-data.c:285
3222 msgid "in SPLIT subcommand"
3225 #: src/matrix-data.c:294
3226 msgid "Split variable may not be named ROWTYPE_ or VARNAME_."
3229 #: src/matrix-data.c:327
3231 msgid "Split variable %s is already another type."
3234 #: src/matrix-data.c:342
3235 msgid "FACTORS subcommand multiply specified."
3238 #: src/matrix-data.c:357
3240 msgid "Factor variable %s is already another type."
3243 #: src/matrix-data.c:372
3244 msgid "CELLS subcommand multiply specified."
3247 #: src/matrix-data.c:378 src/matrix-data.c:397
3248 msgid "expecting positive integer"
3251 #: src/matrix-data.c:391
3252 msgid "N subcommand multiply specified."
3255 #: src/matrix-data.c:412
3256 msgid "CONTENTS subcommand multiply specified."
3259 #: src/matrix-data.c:432
3260 msgid "Nested parentheses not allowed."
3263 #: src/matrix-data.c:442
3264 msgid "Mismatched right parenthesis (`(')."
3267 #: src/matrix-data.c:447
3268 msgid "Empty parentheses not allowed."
3271 #: src/matrix-data.c:460 src/matrix-data.c:468
3272 msgid "in CONTENTS subcommand"
3275 #: src/matrix-data.c:475
3277 msgid "Content multiply specified for %s."
3280 #: src/matrix-data.c:492
3281 msgid "Missing right parenthesis."
3284 #: src/matrix-data.c:512
3285 msgid "Missing VARIABLES subcommand."
3288 #: src/matrix-data.c:518
3290 "CONTENTS subcommand not specified: assuming file contains only CORR matrix."
3293 #: src/matrix-data.c:528
3295 "Missing CELLS subcommand. CELLS is required when ROWTYPE_ is not given in "
3296 "the data and factors are present."
3299 #: src/matrix-data.c:536
3300 msgid "Split file values must be present in the data when ROWTYPE_ is present."
3303 #: src/matrix-data.c:592
3304 msgid "No continuous variables specified."
3307 #: src/matrix-data.c:1006
3309 msgid "End of line expected %s while reading %s."
3312 #: src/matrix-data.c:1193
3314 msgid "expecting value for %s %s"
3317 #: src/matrix-data.c:1344
3319 msgid "Syntax error expecting SPLIT FILE value %s."
3322 #: src/matrix-data.c:1353
3324 msgid "Expecting value %g for %s."
3327 #: src/matrix-data.c:1391 src/matrix-data.c:1820
3329 msgid "Syntax error expecting factor value %s."
3332 #: src/matrix-data.c:1400
3334 msgid "Syntax error expecting value %g for %s %s."
3337 #: src/matrix-data.c:1610
3339 msgid "Syntax error %s expecting SPLIT FILE value."
3342 #: src/matrix-data.c:1734
3345 "Expected %d lines of data for %s content; actually saw %d lines. No data "
3346 "will be output for this content."
3349 #: src/matrix-data.c:1765
3351 msgid "Multiply specified ROWTYPE_ %s."
3354 #: src/matrix-data.c:1770
3356 msgid "Syntax error %s expecting ROWTYPE_ string."
3359 #: src/matrix-data.c:1789
3361 msgid "Syntax error %s."
3364 #: src/matrix-data.c:1935
3366 msgid "Duplicate specification for %s."
3369 #: src/matrix-data.c:1947
3371 msgid "Too many rows of matrix data for %s."
3374 #: src/matrix-data.c:1992
3376 msgid "Syntax error expecting value for %s %s."
3380 msgid "`)' expected after value specification."
3383 #: src/mis-val.c:111
3385 msgid "`(' expected after variable name%s."
3388 #: src/mis-val.c:123
3389 msgid "Long string value specified."
3392 #: src/mis-val.c:128
3393 msgid "Short strings must be of equal width."
3396 #: src/mis-val.c:185
3398 msgid "Range %g THRU %g is not valid because %g is greater than %g."
3401 #: src/mis-val.c:216
3402 msgid "Number or range expected."
3405 #: src/mis-val.c:249
3406 msgid "At most one range can exist in the missing values for any one variable."
3409 #: src/mis-val.c:255
3410 msgid "At most one individual value can be missing along with one range."
3413 #: src/mis-val.c:317
3414 msgid "String is not of proper length."
3417 #: src/mis-val.c:326 src/repeat.c:484
3418 msgid "String expected."
3421 #: src/mis-val.c:366
3422 msgid "Missing value:"
3425 #: src/mis-val.c:371
3426 msgid "(long string variable)"
3429 #: src/mis-val.c:376
3431 msgid "(no missing values)\n"
3434 #: src/mis-val.c:399
3436 msgid "(!!!INTERNAL ERROR--%d!!!)\n"
3439 #: src/modify-vars.c:108
3440 msgid "REORDER subcommand may be given at most once."
3443 #: src/modify-vars.c:131
3444 msgid "Cannot specify ALL after specifying a set of variables."
3447 #: src/modify-vars.c:141
3448 msgid "`(' expected on REORDER subcommand."
3451 #: src/modify-vars.c:153
3452 msgid "`)' expected following variable names on REORDER subcommand."
3455 #: src/modify-vars.c:171
3456 msgid "RENAME subcommand may be given at most once."
3459 #: src/modify-vars.c:184
3460 msgid "`(' expected on RENAME subcommand."
3463 #: src/modify-vars.c:192
3465 "`=' expected between lists of new and old variable names on RENAME "
3469 #: src/modify-vars.c:200 src/rename-vars.c:70
3472 "Differing number of variables in old name list (%d) and in new name list (%"
3476 #: src/modify-vars.c:211
3477 msgid "`)' expected after variable lists on RENAME subcommand."
3480 #: src/modify-vars.c:225
3482 "KEEP subcommand may be given at most once. It may notbe given in "
3483 "conjunction with the DROP subcommand."
3486 #: src/modify-vars.c:267
3488 "DROP subcommand may be given at most once. It may not be given in "
3489 "conjunction with the KEEP subcommand."
3492 #: src/modify-vars.c:293
3494 msgid "Unrecognized subcommand name `%s'."
3497 #: src/modify-vars.c:295
3498 msgid "Subcommand name expected."
3501 #: src/modify-vars.c:303
3502 msgid "`/' or `.' expected."
3507 msgid "Format type %s may not be used with a numeric variable."
3510 #: src/numeric.c:78 src/numeric.c:161 src/vector.c:158
3512 msgid "There is already a variable named %s."
3515 #: src/numeric.c:132
3517 msgid "Format type %s may not be used with a string variable."
3521 msgid "Attempt to iterate driver list reentrantly."
3526 msgid "Unknown output driver `%s'."
3531 msgid "Output driver `%s' referenced but never defined."
3535 msgid "Cannot find output initialization file. Use `-vv' to view search path."
3540 msgid "%s: Opening device description file..."
3543 #: src/output.c:305 src/output.c:1165 src/postscript.c:1097
3545 msgid "Opening %s: %s."
3548 #: src/output.c:316 src/output.c:1176 src/postscript.c:1114
3550 msgid "Reading %s: %s."
3553 #: src/output.c:338 src/output.c:490
3554 msgid "Syntax error."
3557 #: src/output.c:348 src/postscript.c:1125
3559 msgid "Closing %s: %s."
3563 msgid "No output drivers are active."
3567 msgid "Device definition file read successfully."
3571 msgid "Error reading device definition file."
3582 msgid "Syntax error in string constant."
3586 msgid "Syntax error in options."
3590 msgid "Syntax error in options (`=' expected)."
3594 msgid "Syntax error in options (value expected after `=')."
3598 msgid "Driver name expected."
3602 msgid "Class name expected."
3607 msgid "Unknown output driver class `%s'."
3612 msgid "Can't initialize output driver class `%s'."
3617 msgid "Can't initialize output driver `%s' of class `%s'."
3622 msgid "Unknown device type `%s'."
3627 msgid "Can't complete initialization of output driver `%s' of class `%s'."
3632 msgid "Can't deinitialize output driver class `%s'."
3637 msgid "Trying to find keyword `%s'...\n"
3640 #: src/output.c:1026
3642 msgid "Unit \"%s\" is unknown in dimension \"%s\"."
3645 #: src/output.c:1041
3647 msgid "Bad dimension \"%s\"."
3650 #: src/output.c:1067
3652 msgid "`x' expected in paper size `%s'."
3655 #: src/output.c:1077
3657 msgid "Trailing garbage `%s' on paper size `%s'."
3660 #: src/output.c:1126
3661 msgid "Paper size name must not be empty."
3664 #: src/output.c:1157
3665 msgid "Cannot find `papersize' configuration file."
3668 #: src/output.c:1161
3670 msgid "%s: Opening paper size definition file..."
3673 #: src/output.c:1203
3674 msgid "Syntax error in paper size definition."
3677 #: src/output.c:1232
3678 msgid "Paper size definition file read successfully."
3681 #: src/output.c:1234
3682 msgid "Error reading paper size definition file."
3685 #: src/output.c:1303
3687 msgid "Error closing page on %s device of %s class."
3690 #: src/output.c:1307
3692 msgid "Error opening page on %s device of %s class."
3695 #: src/pfm-read.c:89
3697 msgid "portable file %s corrupt at offset %ld: "
3700 #: src/pfm-read.c:108 src/pfm-write.c:501
3702 msgid "%s: Closing portable file: %s."
3705 #: src/pfm-read.c:140
3706 msgid "Bad line end."
3709 #: src/pfm-read.c:221
3711 msgid "Cannot read file %s as portable file: already opened for %s."
3714 #: src/pfm-read.c:227
3716 msgid "%s: Opening portable-file handle %s for reading."
3719 #: src/pfm-read.c:235
3722 "An error occurred while opening \"%s\" for reading as a portable file: %s."
3725 #: src/pfm-read.c:269
3726 msgid "Data record expected."
3729 #: src/pfm-read.c:271
3730 msgid "Read portable-file dictionary successfully."
3733 #: src/pfm-read.c:280
3734 msgid "Error reading portable-file dictionary."
3737 #: src/pfm-read.c:378
3738 msgid "Missing numeric terminator."
3741 #: src/pfm-read.c:415
3742 msgid "Bad integer format."
3745 #: src/pfm-read.c:445
3747 msgid "Bad string length %d."
3750 #: src/pfm-read.c:544
3752 msgid "Bad date string length %d."
3755 #: src/pfm-read.c:548
3756 msgid "Bad character in date."
3759 #: src/pfm-read.c:568
3761 msgid "Bad time string length %d."
3764 #: src/pfm-read.c:572
3765 msgid "Bad character in time."
3768 #: src/pfm-read.c:622 src/pfm-read.c:631 src/sfm-read.c:900 src/sfm-read.c:910
3770 msgid "%s: Bad format specifier byte (%d)."
3773 #: src/pfm-read.c:633
3775 msgid "%s variable %s has %s format specifier %s."
3778 #: src/pfm-read.c:634 src/print.c:612 src/sfm-read.c:914
3782 #: src/pfm-read.c:634 src/print.c:612 src/sfm-read.c:914
3786 #: src/pfm-read.c:673
3787 msgid "Expected variable count record."
3790 #: src/pfm-read.c:677
3792 msgid "Invalid number of variables %d."
3795 #: src/pfm-read.c:687
3797 msgid "Unexpected flag value %d."
3800 #: src/pfm-read.c:701
3802 msgid "Weight variable name (%s) truncated."
3805 #: src/pfm-read.c:716
3806 msgid "Expected variable record."
3809 #: src/pfm-read.c:722
3811 msgid "Invalid variable width %d."
3814 #: src/pfm-read.c:740
3816 msgid "position %d: Variable name has %u characters."
3819 #: src/pfm-read.c:744
3821 msgid "position %d: Variable name begins with invalid character."
3824 #: src/pfm-read.c:748
3826 msgid "position %d: Variable name begins with lowercase letter %c."
3829 #: src/pfm-read.c:761
3831 msgid "position %d: Variable name character %d is lowercase letter %c."
3834 #: src/pfm-read.c:771
3836 msgid "position %d: character `\\%03o' is not valid in a variable name."
3839 #: src/pfm-read.c:782
3841 msgid "Duplicate variable name %s."
3844 #: src/pfm-read.c:826
3846 msgid "Bad missing values for %s."
3849 #: src/pfm-read.c:849
3851 msgid "Weighting variable %s not present in dictionary."
3854 #: src/pfm-read.c:922
3856 msgid "Unknown variable %s while parsing value labels."
3859 #: src/pfm-read.c:925
3862 "Cannot assign value labels to %s and %s, which have different variable types "
3866 #: src/pfm-read.c:958
3868 msgid "Duplicate label for value %g for variable %s."
3871 #: src/pfm-read.c:961
3873 msgid "Duplicate label for value `%.*s' for variable %s."
3876 #: src/pfm-read.c:1031
3877 msgid "End of file midway through case."
3880 #: src/pfm-read.c:1041
3881 msgid "reading as a portable file"
3884 #: src/pfm-write.c:71
3886 msgid "Cannot write file %s as portable file: already opened for %s."
3889 #: src/pfm-write.c:77
3891 msgid "%s: Opening portable-file handle %s for writing."
3894 #: src/pfm-write.c:87
3897 "An error occurred while opening \"%s\" for writing as a portable file: %s."
3900 #: src/pfm-write.c:123
3901 msgid "Wrote portable-file header successfully."
3904 #: src/pfm-write.c:128
3905 msgid "Error writing portable-file header."
3908 #: src/pfm-write.c:168
3910 msgid "%s: Writing portable file: %s."
3913 #: src/pfm-write.c:510
3914 msgid "writing as a portable file"
3917 #: src/postscript.c:323
3919 msgid "PostScript driver initializing as `%s'..."
3922 #: src/postscript.c:447
3925 "PostScript driver: The defined page is not long enough to hold margins and "
3926 "headers, plus least 15 lines of the default fonts. In fact, there's only "
3927 "room for %d lines of each font at the default size of %d.%03d points."
3930 #: src/postscript.c:577
3932 msgid "Unknown configuration parameter `%s' for PostScript device driver."
3935 #: src/postscript.c:593
3938 "Unknown orientation `%s'. Valid orientations are `portrait' and `landscape'."
3941 #: src/postscript.c:605
3943 "Unknown value for `data'. Valid values are `clean7bit', `clean8bit', and "
3947 #: src/postscript.c:614
3948 msgid "Unknown value for `line-ends'. Valid values are `lf' and `crlf'."
3951 #: src/postscript.c:623
3952 msgid "Unknown value for `line-style'. Valid values are `thick' and `double'."
3955 #: src/postscript.c:685
3958 "Default font size must be at least 1 point (value of 1000 for key `%s')."
3961 #: src/postscript.c:717
3963 msgid "Value for `%s' must be a dimension of positive length (i.e., `1in')."
3966 #: src/postscript.c:780
3968 msgid "Nonnegative integer required as value for `%s'."
3971 #: src/postscript.c:906
3973 msgid "%s: %s: Opening PostScript font encoding..."
3976 #: src/postscript.c:912
3979 "PostScript driver: Cannot open encoding file `%s': %s. Substituting "
3980 "ISOLatin1Encoding for missing encoding."
3983 #: src/postscript.c:954
3984 msgid "PostScript driver: Invalid numeric format."
3987 #: src/postscript.c:959
3990 "PostScript driver: Codes must be between 0 and 255. (%d is not allowed.)"
3993 #: src/postscript.c:995
3995 msgid "PostScript driver: Error closing encoding file `%s'."
3998 #: src/postscript.c:998
4000 msgid "%s: PostScript font encoding read successfully."
4003 #: src/postscript.c:1092
4005 msgid "%s: %s: Opening PostScript encoding list file."
4008 #: src/postscript.c:1127
4010 msgid "%s: PostScript encoding list file read successfully."
4013 #: src/postscript.c:1141
4014 msgid "<<default encoding>>"
4017 #: src/postscript.c:1299
4019 "Cannot find PostScript prologue. The use of `-vv' on the command line is "
4020 "suggested as a debugging aid."
4023 #: src/postscript.c:1304
4025 msgid "%s: %s: Opening PostScript prologue..."
4028 #: src/postscript.c:1476
4030 msgid "%s: PostScript prologue read successfully."
4033 #: src/postscript.c:1480
4035 msgid "%s: Error reading PostScript prologue."
4038 #: src/postscript.c:1650
4040 msgid "PostScript output driver: %s: %s"
4043 #: src/postscript.c:2334
4045 msgid "PostScript driver: Cannot find encoding `%s' for PostScript font `%s'."
4049 msgid "expecting a valid subcommand"
4052 #: src/print.c:370 src/print.c:387
4054 msgid "%g is not a valid column location."
4059 msgid "Column location expected following `%d-'."
4065 "%d-%ld is not a valid column range. The second column must be greater than "
4066 "or equal to the first."
4072 "%s is not of the same type as %s. To specify variables of different types "
4073 "in the same variable list, use a FORTRAN-like format specifier."
4078 "The ending column for a field must not be less than the starting column."
4083 msgid "%s variables cannot be displayed with format %s."
4088 msgid "Display format %s may not be used with a %s variable."
4093 msgid "Writing %3d records to file %s."
4098 msgid "Writing %3d records to the listing file."
4102 msgid "A file name or handle was expected in the OUTFILE subcommand."
4108 "The expression on PRINT SPACE evaluated to %d. It's not possible to PRINT "
4109 "SPACE a negative number of lines."
4115 "%d variable(s) cannot be recoded into %d variable(s). Specify the same "
4116 "number of variables as input and output variables."
4122 "There is no string variable named %s. (All string variables specified on "
4123 "INTO must already exist. Use the STRING command to create a string "
4130 "Type mismatch between input and output variables. Output variable %s is not "
4131 "a string variable, but all the input variables are string variables."
4136 msgid "Type mismatch after INTO: %s is not a numeric variable."
4141 "INTO must be used when the input values are numeric and output values are "
4147 "INTO must be used when the input values are string and output values are "
4153 "Inconsistent output types. The output values must be all numeric or all "
4158 msgid "following LO THRU"
4161 #: src/recode.c:571 src/recode.c:600
4162 msgid "in source value"
4167 "Keyword CONVERT may only be used with string input values and numeric output "
4176 #: src/recode.c:890 src/recode.c:906
4181 #: src/rename-vars.c:55
4182 msgid "`(' expected."
4185 #: src/rename-vars.c:63
4186 msgid "`=' expected between lists of new and old variable names."
4189 #: src/rename-vars.c:81
4190 msgid "`)' expected after variable names."
4193 #: src/rename-vars.c:91
4195 msgid "Renaming would duplicate variable name %s."
4200 msgid "Identifier %s is given twice."
4206 "There must be the same number of substitutions for each dummy variable "
4207 "specified. Since there were %d substitutions for %s, there must be %d for %"
4208 "s as well, but %d were specified."
4212 msgid "No commands in scope."
4216 msgid "No matching DO REPEAT."
4220 msgid "The sampling factor must be between 0 and 1 exclusive."
4225 msgid "Cannot sample %d observations from a population of %d."
4229 msgid "The filter variable must be numeric."
4233 msgid "The filter variable may not be scratch."
4237 msgid "Only last instance of this command is in effect."
4240 #: src/sfm-read.c:150
4241 msgid "corrupt system file: "
4244 #: src/sfm-read.c:166 src/sfm-write.c:740
4246 msgid "%s: Closing system file: %s."
4249 #: src/sfm-read.c:239
4251 msgid "Cannot read file %s as system file: already opened for %s."
4254 #: src/sfm-read.c:244
4256 msgid "%s: Opening system-file handle %s for reading."
4259 #: src/sfm-read.c:252
4262 "An error occurred while opening \"%s\" for reading as a system file: %s."
4265 #: src/sfm-read.c:286
4268 "%s: Weighting variable may not be a continuation of a long string variable."
4271 #: src/sfm-read.c:289
4273 msgid "%s: Weighting variable may not be a string variable."
4276 #: src/sfm-read.c:314
4279 "%s: Orphaned variable index record (type 4). Type 4 records must always "
4280 "immediately follow type 3 records."
4283 #: src/sfm-read.c:369
4285 msgid "%s: Unrecognized record type 7, subtype %d encountered in system file."
4288 #: src/sfm-read.c:393
4290 msgid "%s: Unrecognized record type %d."
4293 #: src/sfm-read.c:399
4294 msgid "Read system-file dictionary successfully."
4297 #: src/sfm-read.c:409
4298 msgid "Error reading system-file header."
4301 #: src/sfm-read.c:433
4304 "%s: Bad size (%d) or count (%d) field on record type 7, subtype 3.\tExpected "
4308 #: src/sfm-read.c:445
4311 "%s: Floating-point representation in system file is not IEEE-754. PSPP "
4312 "cannot convert between floating-point formats."
4315 #: src/sfm-read.c:460
4318 "%s: File-indicated endianness (%s) does not match endianness intuited from "
4322 #: src/sfm-read.c:462 src/sfm-read.c:463
4326 #: src/sfm-read.c:462 src/sfm-read.c:463
4327 msgid "little-endian"
4330 #: src/sfm-read.c:464
4334 #: src/sfm-read.c:468
4336 msgid "%s: File-indicated character representation code (%s) is not ASCII."
4339 #: src/sfm-read.c:470
4343 #: src/sfm-read.c:489
4346 "%s: Bad size (%d) or count (%d) field on record type 7, subtype 4.\tExpected "
4350 #: src/sfm-read.c:504
4353 "%s: File-indicated value is different from internal value for at least one "
4354 "of the three system values. SYSMIS: indicated %g, expected %g; HIGHEST: %g, "
4355 "%g; LOWEST: %g, %g."
4358 #: src/sfm-read.c:535
4361 "%s: Bad magic. Proper system files begin with the four characters `$FL2'. "
4362 "This file will not be read."
4365 #: src/sfm-read.c:578
4368 "%s: File layout code has unexpected value %d. Value should be 2, in big-"
4369 "endian or little-endian format."
4372 #: src/sfm-read.c:594
4374 msgid "%s: Number of elements per case (%d) is not between 1 and %d."
4377 #: src/sfm-read.c:601
4380 "%s: Index of weighting variable (%d) is not between 0 and number of elements "
4384 #: src/sfm-read.c:607
4386 msgid "%s: Number of cases in file (%ld) is not between -1 and %d."
4389 #: src/sfm-read.c:612
4391 msgid "%s: Compression bias (%g) is not the usual value of 100."
4394 #: src/sfm-read.c:705
4396 msgid "%s: position %d: Bad record type (%d); the expected value was 2."
4399 #: src/sfm-read.c:714
4402 "%s: position %d: String variable does not have proper number of continuation "
4406 #: src/sfm-read.c:722
4408 msgid "%s: position %d: Superfluous long string continuation record."
4411 #: src/sfm-read.c:727
4413 msgid "%s: position %d: Bad variable type code %d."
4416 #: src/sfm-read.c:730
4418 msgid "%s: position %d: Variable label indicator field is not 0 or 1."
4421 #: src/sfm-read.c:734
4424 "%s: position %d: Missing value indicator field is not -3, -2, 0, 1, 2, or 3."
4427 #: src/sfm-read.c:740
4429 msgid "%s: position %d: Variable name begins with invalid character."
4432 #: src/sfm-read.c:743
4434 msgid "%s: position %d: Variable name begins with lowercase letter %c."
4437 #: src/sfm-read.c:746
4440 "%s: position %d: Variable name begins with octothorpe (`#'). Scratch "
4441 "variables should not appear in system files."
4444 #: src/sfm-read.c:760
4446 msgid "%s: position %d: Variable name character %d is lowercase letter %c."
4449 #: src/sfm-read.c:768
4452 "%s: position %d: character `\\%03o' (%c) is not valid in a variable name."
4455 #: src/sfm-read.c:776
4457 msgid "%s: Duplicate variable name `%s' within system file."
4460 #: src/sfm-read.c:801
4462 msgid "%s: Variable %s indicates variable label of invalid length %d."
4465 #: src/sfm-read.c:817
4467 msgid "%s: Long string variable %s may not have missing values."
4470 #: src/sfm-read.c:841
4473 "%s: String variable %s may not have missing values specified as a range."
4476 #: src/sfm-read.c:878
4478 msgid "%s: Long string continuation records omitted at end of dictionary."
4481 #: src/sfm-read.c:881
4484 "%s: System file header indicates %d variable positions but %d were read from "
4488 #: src/sfm-read.c:913
4490 msgid "%s: %s variable %s has %s format specifier %s."
4493 #: src/sfm-read.c:992
4496 "%s: Variable index record (type 4) does not immediately follow value label "
4497 "record (type 3) as it should."
4500 #: src/sfm-read.c:1002
4503 "%s: Number of variables associated with a value label (%d) is not between 1 "
4504 "and the number of variables (%d)."
4507 #: src/sfm-read.c:1018
4510 "%s: Variable index associated with value label (%d) is not between 1 and the "
4511 "number of values (%d)."
4514 #: src/sfm-read.c:1025
4517 "%s: Variable index associated with value label (%d) refers to a continuation "
4518 "of a string variable, not to an actual variable."
4521 #: src/sfm-read.c:1029
4523 msgid "%s: Value labels are not allowed on long string variables (%s)."
4526 #: src/sfm-read.c:1039
4529 "%s: Variables associated with value label are not all of identical type. "
4530 "Variable %s has %s type, but variable %s has %s type."
4533 #: src/sfm-read.c:1079
4535 msgid "%s: File contains duplicate label for value %g for variable %s."
4538 #: src/sfm-read.c:1082
4540 msgid "%s: File contains duplicate label for value `%.*s' for variable %s."
4543 #: src/sfm-read.c:1119 src/sfm-read.c:1394
4545 msgid "%s: Reading system file: %s."
4548 #: src/sfm-read.c:1121 src/sfm-read.c:1303 src/sfm-read.c:1344
4550 msgid "%s: Unexpected end of file."
4553 #: src/sfm-read.c:1139
4555 msgid "%s: System file contains multiple type 6 (document) records."
4558 #: src/sfm-read.c:1144
4560 msgid "%s: Number of document lines (%ld) must be greater than 0."
4563 #: src/sfm-read.c:1168
4564 msgid "dictionary:\n"
4567 #: src/sfm-read.c:1176
4571 #: src/sfm-read.c:1177
4575 #: src/sfm-read.c:1180
4579 #: src/sfm-read.c:1180
4583 #: src/sfm-read.c:1186
4587 #: src/sfm-read.c:1190
4591 #: src/sfm-read.c:1194
4595 #: src/sfm-read.c:1198
4599 #: src/sfm-read.c:1206
4603 #: src/sfm-read.c:1210
4607 #: src/sfm-read.c:1214
4611 #: src/sfm-read.c:1218
4615 #: src/sfm-read.c:1222
4619 #: src/sfm-read.c:1256
4621 msgid "%s: Error reading file: %s."
4624 #: src/sfm-read.c:1294
4626 msgid "%s: Compressed data is corrupted. Data ends partway through a case."
4629 #: src/sfm-read.c:1396
4631 msgid "%s: Partial record at end of system file."
4634 #: src/sfm-read.c:1434
4635 msgid "reading as a system file"
4638 #: src/sfm-write.c:96
4640 msgid "Cannot write file %s as system file: already opened for %s."
4643 #: src/sfm-write.c:101
4645 msgid "%s: Opening system-file handle %s for writing."
4648 #: src/sfm-write.c:111
4651 "An error occurred while opening \"%s\" for writing as a system file: %s."
4654 #: src/sfm-write.c:164
4655 msgid "Wrote system-file header successfully."
4658 #: src/sfm-write.c:169
4659 msgid "Error writing system-file header."
4662 #: src/sfm-write.c:604
4664 msgid "%s: Writing system file: %s."
4667 #: src/sfm-write.c:750
4668 msgid "writing as a system file"
4672 msgid "`A' or `D' expected inside parentheses."
4676 msgid "`)' expected."
4681 msgid "%s: Cannot create temporary directory: %s."
4686 msgid "%s: Error removing directory for temporary files: %s."
4692 "Out of memory. Could not allocate room for minimum of %d cases of %d bytes "
4693 "each. (PSPP workspace is currently restricted to a maximum of %d KB.)"
4698 msgid "allocated %d cases == %d bytes\n"
4703 msgid "%s: Error writing temporary file: %s."
4708 msgid "SORT: Closing handle %d."
4711 #: src/sort.c:590 src/sort.c:815
4713 msgid "%s: Error closing temporary file: %s."
4716 #: src/sort.c:612 src/sort.c:628
4718 msgid "SORT: %s: Opening for writing as run %d."
4723 msgid "%s: Error opening temporary file for reading: %s."
4726 #: src/sort.c:660 src/sort.c:676
4728 msgid "%s: Error creating temporary file: %s."
4731 #: src/sort.c:819 src/sort.c:981 src/sort.c:1031 src/sort.c:1203
4734 msgid "%s: Error removing temporary file: %s."
4738 msgid "merging runs"
4743 msgid " into run %d(%d)\n"
4747 msgid "Out of memory expanding Huffman priority queue."
4752 msgid "%s: Error creating temporary file for merge: %s."
4755 #: src/sort.c:1070 src/sort.c:1130
4757 msgid "%s: Error reading temporary file in merge: %s."
4760 #: src/sort.c:1073 src/sort.c:1134
4762 msgid "%s: Unexpected end of temporary file in merge."
4767 msgid "%s: Error writing temporary file in merge: %s."
4770 #: src/sort.c:1150 src/sort.c:1183
4772 msgid "%s: Error closing temporary file in merge: %s."
4777 msgid "%s: Error removing temporary file in merge: %s."
4782 msgid "%s: Cannot open sort result file: %s."
4787 msgid "%s: Error reading sort result file: %s."
4792 msgid "%s: Unexpected end of sort result file: %s."
4797 msgid "%s: Error closing sort result file: %s."
4802 msgid "%s: Error removing sort result file: %s."
4805 #: src/sysfile-info.c:97
4809 #: src/sysfile-info.c:99
4813 #: src/sysfile-info.c:103
4817 #: src/sysfile-info.c:106
4821 #: src/sysfile-info.c:109
4825 #: src/sysfile-info.c:110
4829 #: src/sysfile-info.c:110
4833 #: src/sysfile-info.c:111
4837 #: src/sysfile-info.c:114
4841 #: src/sysfile-info.c:117
4845 #: src/sysfile-info.c:118
4846 msgid "System File."
4849 #: src/sysfile-info.c:119
4853 #: src/sysfile-info.c:123
4854 msgid "Not weighted."
4857 #: src/sysfile-info.c:125
4861 #: src/sysfile-info.c:127
4863 msgid "Compression %s."
4866 #: src/sysfile-info.c:127
4870 #: src/sysfile-info.c:127
4874 #: src/sysfile-info.c:136 src/sysfile-info.c:377
4878 #: src/sysfile-info.c:137 src/sysfile-info.c:374
4882 #: src/sysfile-info.c:196
4883 msgid "The active file does not have a file label."
4886 #: src/sysfile-info.c:199
4890 #: src/sysfile-info.c:261
4891 msgid "No variables to display."
4894 #: src/sysfile-info.c:280
4895 msgid "Macros not supported."
4898 #: src/sysfile-info.c:290
4899 msgid "The active file dictionary does not contain any documents."
4902 #: src/sysfile-info.c:299
4903 msgid "Documents in the active file:"
4906 #: src/sysfile-info.c:379 src/sysfile-info.c:537 src/vfm.c:1095
4910 #: src/sysfile-info.c:451
4915 #: src/sysfile-info.c:458
4917 msgid "Print Format: %s"
4920 #: src/sysfile-info.c:461
4922 msgid "Write Format: %s"
4925 #: src/sysfile-info.c:469
4926 msgid "Missing Values: "
4929 #: src/sysfile-info.c:593
4930 msgid "No vectors defined."
4933 #: src/sysfile-info.c:608
4939 msgid "bad vline: x=%d+%d=%d y=(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
4945 "bad box: (%d+%d=%d,%d+%d=%d)-(%d+%d=%d,%d+%d=%d) in table size (%d,%d)\n"
4948 #: src/temporary.c:49
4949 msgid "This command is not valid inside DO IF or LOOP."
4952 #: src/temporary.c:56
4954 "This command may only appear once between procedures and procedure-like "
4960 msgid "%s before: %s\n"
4969 msgid "%s: `.' expected after string."
4974 msgid "%s after: %s\n"
4979 msgid "Document entered %s %02d:%02d:%02d by %s (%s):"
4982 #: src/val-labs.c:138
4985 "It is not possible to assign value labels to long string variables such as %"
4989 #: src/val-labs.c:176
4990 msgid "String expected for value."
4993 #: src/val-labs.c:185
4994 msgid "Number expected for value."
4997 #: src/val-labs.c:189
4999 msgid "Value label `%g' is not integer."
5002 #: src/val-labs.c:199
5003 msgid "Truncating value label to 60 characters."
5006 #: src/val-labs.c:220
5007 msgid "Value labels:"
5010 #: src/val-labs.c:237
5012 msgid " (no value labels)\n"
5015 #: src/var-labs.c:53
5016 msgid "String expected for variable label."
5019 #: src/var-labs.c:59
5020 msgid "Truncating variable label to 120 characters."
5023 #: src/var-labs.c:87
5025 msgid "Variable labels:\n"
5028 #: src/var-labs.c:94
5030 msgid "(no variable label)"
5033 #: src/vars-prs.c:46
5035 msgid "%s is not a variable name."
5038 #: src/vars-prs.c:194
5040 msgid "%s TO %s is not valid syntax since %s precedes %s in the dictionary."
5043 #: src/vars-prs.c:204
5046 "When using the TO keyword to specify several variables, both variables must "
5047 "be from the same variable dictionaries, of either ordinary, scratch, or "
5048 "system variables. %s is a %s variable, whereas %s is %s."
5051 #: src/vars-prs.c:222
5053 msgid "Scratch variables (such as %s) are not allowed here."
5056 #: src/vars-prs.c:245
5059 "%s is not a numeric variable. It will not be included in the variable list."
5062 #: src/vars-prs.c:248
5065 "%s is not a string variable. It will not be included in the variable list."
5068 #: src/vars-prs.c:252
5071 "%s and %s are not the same type. All variables in this variable list must "
5072 "be of the same type. %s will be omitted from list."
5075 #: src/vars-prs.c:257
5077 msgid "Variable %s appears twice in variable list."
5080 #: src/vars-prs.c:334
5081 msgid "incorrect use of TO convention"
5084 #: src/vars-prs.c:380
5085 msgid "Scratch variables not allowed here."
5088 #: src/vars-prs.c:402
5089 msgid "Prefixes don't match in use of TO convention."
5092 #: src/vars-prs.c:407
5093 msgid "Bad bounds in use of TO convention."
5098 msgid "Vector name %s is given twice."
5103 msgid "There is already a vector with name %s."
5108 "A slash must be used to separate each vector specification when using the "
5109 "long form. Commands such as VECTOR A,B=Q1 TO Q20 are not supported."
5113 msgid "Vectors must have at least one element."
5118 msgid "%s%d is too long for a variable name."
5123 "The syntax for this command does not match the expected syntax for either "
5124 "the long form or the short form of VECTOR."
5130 "Workspace overflow predicted. Max workspace is currently set to %d KB (%d "
5131 "cases at %d bytes each). Paging active file to disk."
5141 "An error occurred attempting to create a temporary file for use as the "
5148 "An error occurred while attempting to read from a temporary file created for "
5149 "the active file: %s."
5155 "An error occurred while attempting to write to a temporary file used as the "
5162 "An error occurred while attempting to rewind a temporary file used as the "
5167 msgid "Virtual memory exhausted. Paging active file to disk."
5173 "Workspace limit of %d KB (%d cases at %d bytes each) overflowed. Paging "
5174 "active file to disk."
5177 #: src/vfm.c:814 src/vfm.c:851
5180 "An error occurred while attempting to write to a temporary file created as "
5181 "the active file, while paging to disk: %s."
5189 msgid "The weighting variable must be numeric."
5193 msgid "The weighting variable may not be scratch."