Remove redundant code.

[pspp] / gnulib-tool

#! /bin/sh
#
# Copyright (C) 2002-2007 Free Software Foundation, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#

# This program is meant for authors or maintainers which want to import
# modules from gnulib into their packages.

progname=$0
package=gnulib
cvsdatestamp='$Date: 2007-09-17 10:26:33 $'
last_checkin_date=`echo "$cvsdatestamp" | sed -e 's,^\$[D]ate: ,,'`
# Sometimes last_checkin_date is "YYYY/MM/DD ...", sometimes "YYYY-MM-DD ...".
version=`echo "$last_checkin_date" | sed -e 's/ .*$//' -e 's,/,-,g'`
# version is in YYYY-MM-DD format.
nl='
'
IFS=" ""        $nl"

# You can set AUTOCONFPATH to empty if autoconf 2.57 is already in your PATH.
AUTOCONFPATH=
#case $USER in
#  bruno )
#    AUTOCONFBINDIR=/packages/gnu-inst-autoconf/2.57/bin
#    AUTOCONFPATH="eval env PATH=${AUTOCONFBINDIR}:\$PATH "
#    ;;
#esac

# You can set AUTOMAKEPATH to empty if automake 1.9.x is already in your PATH.
AUTOMAKEPATH=

# You can set GETTEXTPATH to empty if autopoint 0.15 is already in your PATH.
GETTEXTPATH=

# If you didn't set AUTOCONFPATH and AUTOMAKEPATH, you can also set the
# variables AUTOCONF, AUTOHEADER, ACLOCAL, AUTOMAKE, AUTORECONF individually.
if test -z "${AUTOCONF}" || test -n "${AUTOCONFPATH}"; then
  AUTOCONF="${AUTOCONFPATH}autoconf"
fi
if test -z "${AUTOHEADER}" || test -n "${AUTOCONFPATH}"; then
  AUTOHEADER="${AUTOCONFPATH}autoheader"
fi
if test -z "${ACLOCAL}" || test -n "${AUTOMAKEPATH}"; then
  ACLOCAL="${AUTOMAKEPATH}aclocal"
fi
if test -z "${AUTOMAKE}" || test -n "${AUTOMAKEPATH}"; then
  AUTOMAKE="${AUTOMAKEPATH}automake"
fi
if test -z "${AUTORECONF}" || test -n "${AUTOCONFPATH}"; then
  AUTORECONF="${AUTOCONFPATH}autoreconf"
fi

# If you didn't set GETTEXTPATH, you can also set the variable AUTOPOINT.
if test -z "${AUTOPOINT}" || test -n "${GETTEXTPATH}"; then
  AUTOPOINT="${GETTEXTPATH}autopoint"
fi

# When using GNU sed, turn off as many GNU extensions as possible,
# to minimize the risk of accidentally using non-portable features.
# However, do this only for gnulib-tool itself, not for the code that
# gnulib-tool generates, since we don't want "sed --posix" to leak
# into makefiles.
if (alias) > /dev/null 2>&1 && echo | sed --posix -e d >/dev/null 2>&1; then
  # Define sed as an alias.
  # It is not always possible to use aliases. Aliases are guaranteed to work
  # if the executing shell is bash and either it is invoked as /bin/sh or
  # is a version >= 2.0, supporting shopt. This is the common case.
  # Two other approaches (use of a variable $sed or of a function func_sed
  # instead of an alias) require massive, fragile code changes.
  # An other approach (use of function sed) requires `which sed` - but 'which'
  # is hard to emulate, due to missing "test -x" on some platforms.
  if test -n "$BASH_VERSION"; then
    shopt -s expand_aliases >/dev/null 2>&1
  fi
  alias sed='sed --posix'
fi

# func_usage
# outputs to stdout the --help usage message.
func_usage ()
{
  echo "\
Usage: gnulib-tool --list
       gnulib-tool --import [module1 ... moduleN]
       gnulib-tool --update
       gnulib-tool --create-testdir --dir=directory [module1 ... moduleN]
       gnulib-tool --create-megatestdir --dir=directory [module1 ... moduleN]
       gnulib-tool --test --dir=directory module1 ... moduleN
       gnulib-tool --megatest --dir=directory [module1 ... moduleN]
       gnulib-tool --extract-description module
       gnulib-tool --extract-notice module
       gnulib-tool --extract-filelist module
       gnulib-tool --extract-dependencies module
       gnulib-tool --extract-autoconf-snippet module
       gnulib-tool --extract-automake-snippet module
       gnulib-tool --extract-include-directive module
       gnulib-tool --extract-link-directive module
       gnulib-tool --extract-license module
       gnulib-tool --extract-maintainer module
       gnulib-tool --extract-tests-module module

Operation modes:
      --list                print the available module names
      --import              import the given modules into the current package;
                            if no modules are specified, update the current
                            package from the current gnulib
      --update              update the current package, restore files omitted
                            from CVS
      --create-testdir      create a scratch package with the given modules
      --create-megatestdir  create a mega scratch package with the given modules
                            one by one and all together
      --test                test the combination of the given modules
                            (recommended to use CC=\"gcc -Wall\" here)
      --megatest            test the given modules one by one and all together
                            (recommended to use CC=\"gcc -Wall\" here)
      --extract-description        extract the description
      --extract-notice             extract the notice or banner
      --extract-filelist           extract the list of files
      --extract-dependencies       extract the dependencies
      --extract-autoconf-snippet   extract the snippet for configure.ac
      --extract-automake-snippet   extract the snippet for library makefile
      --extract-include-directive  extract the #include directive
      --extract-link-directive     extract the linker directive
      --extract-license            report the license terms of the source files
                                   under lib/
      --extract-maintainer         report the maintainer(s) inside gnulib
      --extract-tests-module       report the unit test module, if it exists

General options:
      --dir=DIRECTORY       Specify the target directory.
                            For --import, this specifies where your
                            configure.ac can be found.  Defaults to current
                            directory.
      --local-dir=DIRECTORY  Specify a local override directory where to look
                            up files before looking in gnulib's directory.
      --verbose             Increase verbosity. May be repeated.
      --quiet               Decrease verbosity. May be repeated.

Options for --import:
      --lib=LIBRARY         Specify the library name.  Defaults to 'libgnu'.
      --source-base=DIRECTORY
                            Directory relative to --dir where source code is
                            placed (default \"lib\").
      --m4-base=DIRECTORY   Directory relative to --dir where *.m4 macros are
                            placed (default \"m4\").
      --po-base=DIRECTORY   Directory relative to --dir where *.po files are
                            placed (default \"po\").
      --doc-base=DIRECTORY  Directory relative to --dir where doc files are
                            placed (default \"doc\").
      --tests-base=DIRECTORY
                            Directory relative to --dir where unit tests are
                            placed (default \"tests\").
      --aux-dir=DIRECTORY   Directory relative to --dir where auxiliary build
                            tools are placed (default \"build-aux\").
      --with-tests          Include unit tests for the included modules.
      --avoid=MODULE        Avoid including the given MODULE. Useful if you
                            have code that provides equivalent functionality.
                            This option can be repeated.
      --lgpl[=2|=3]         Abort if modules aren't available under the LGPL.
                            Also modify license template from GPL to LGPL.
                            The version number of the LGPL can be specified;
                            the default is currently LGPLv3.
      --makefile-name=NAME  Name of makefile in automake syntax in the
                            source-base and tests-base directories
                            (default \"Makefile.am\").
      --libtool             Use libtool rules.
      --no-libtool          Don't use libtool rules.
      --macro-prefix=PREFIX  Specify the prefix of the macros 'gl_EARLY' and
                            'gl_INIT'. Default is 'gl'.
      --po-domain=NAME      Specify the prefix of the i18n domain. Usually use
                            the package name. A suffix '-gnulib' is appended.
      --no-changelog        don't update or create ChangeLog files

Options for --import and --update:
      --dry-run             For --import, only print what would have been done.
  -s, --symbolic, --symlink Make symbolic links instead of copying files.
      --local-symlink       Make symbolic links instead of copying files, only
                            for files from the local override directory.
  -S, --more-symlinks       Make symbolic links instead of copying files, and
                            don't replace copyright notices.

Report bugs to <bug-gnulib@gnu.org>."
}

# func_version
# outputs to stdout the --version message.
func_version ()
{
  year=`echo "$version" | sed -e 's,-.*$,,'`
  echo "\
$progname (GNU $package) $version
Copyright (C) $year Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by" "Bruno Haible" "and" "Simon Josefsson"
}

# func_emit_copyright_notice
# outputs to stdout a header for a generated file.
func_emit_copyright_notice ()
{
  echo "# Copyright (C) 2004-2007 Free Software Foundation, Inc."
  echo "#"
  echo "# This file is free software, distributed under the terms of the GNU"
  echo "# General Public License.  As a special exception to the GNU General"
  echo "# Public License, this file may be distributed as part of a program"
  echo "# that contains a configuration script generated by Autoconf, under"
  echo "# the same distribution terms as the rest of that program."
  echo "#"
  echo "# Generated by gnulib-tool."
}

# func_exit STATUS
# exit with status
func_exit ()
{
  (exit $1); exit $1
}

# func_tmpdir
# creates a temporary directory.
# Sets variable
# - tmp             pathname of freshly created temporary directory
func_tmpdir ()
{
  # Use the environment variable TMPDIR, falling back to /tmp. This allows
  # users to specify a different temporary directory, for example, if their
  # /tmp is filled up or too small.
  : ${TMPDIR=/tmp}
  {
    # Use the mktemp program if available. If not available, hide the error
    # message.
    tmp=`(umask 077 && mktemp -d "$TMPDIR/glXXXXXX") 2>/dev/null` &&
    test -n "$tmp" && test -d "$tmp"
  } ||
  {
    # Use a simple mkdir command. It is guaranteed to fail if the directory
    # already exists.  $RANDOM is bash specific and expands to empty in shells
    # other than bash, ksh and zsh.  Its use does not increase security;
    # rather, it minimizes the probability of failure in a very cluttered /tmp
    # directory.
    tmp=$TMPDIR/gl$$-$RANDOM
    (umask 077 && mkdir "$tmp")
  } ||
  {
    echo "$0: cannot create a temporary directory in $TMPDIR" >&2
    func_exit 1
  }
}

# func_append var value
# appends the given value to the shell variable var.
if ( foo=bar; foo+=baz && test "$foo" = barbaz ) >/dev/null 2>&1; then
  # Use bash's += operator. It reduces complexity of appending repeatedly to
  # a single variable from O(n^2) to O(n).
  func_append ()
  {
    eval "$1+=\"\$2\""
  }
else
  func_append ()
  {
    eval "$1=\"\$$1\$2\""
  }
fi

# func_fatal_error message
# outputs to stderr a fatal error message, and terminates the program.
func_fatal_error ()
{
  echo "gnulib-tool: *** $1" 1>&2
  echo "gnulib-tool: *** Stop." 1>&2
  func_exit 1
}

# func_readlink SYMLINK
# outputs the target of the given symlink.
if (type -p readlink) > /dev/null 2>&1; then
  func_readlink ()
  {
    # Use the readlink program from GNU coreutils.
    readlink "$1"
  }
else
  func_readlink ()
  {
    # Use two sed invocations. A single sed -n -e 's,^.* -> \(.*\)$,\1,p'
    # would do the wrong thing if the link target contains " -> ".
    LC_ALL=C ls -l "$1" | sed -e 's, -> ,#%%#,' | sed -n -e 's,^.*#%%#\(.*\)$,\1,p'
  }
fi

# func_relativize DIR1 DIR2
# computes a relative pathname RELDIR such that DIR1/RELDIR = DIR2.
# Input:
# - DIR1            relative pathname, relative to the current directory
# - DIR2            relative pathname, relative to the current directory
# Output:
# - reldir          relative pathname of DIR2, relative to DIR1
func_relativize ()
{
  dir0=`pwd`
  dir1="$1"
  dir2="$2"
  sed_first='s,^\([^/]*\)/.*$,\1,'
  sed_rest='s,^[^/]*/*,,'
  sed_last='s,^.*/\([^/]*\)$,\1,'
  sed_butlast='s,/*[^/]*$,,'
  while test -n "$dir1"; do
    first=`echo "$dir1" | sed -e "$sed_first"`
    if test "$first" != "."; then
      if test "$first" = ".."; then
        dir2=`echo "$dir0" | sed -e "$sed_last"`/"$dir2"
        dir0=`echo "$dir0" | sed -e "$sed_butlast"`
      else
        first2=`echo "$dir2" | sed -e "$sed_first"`
        if test "$first2" = "$first"; then
          dir2=`echo "$dir2" | sed -e "$sed_rest"`
        else
          dir2="../$dir2"
        fi
        dir0="$dir0"/"$first"
      fi
    fi
    dir1=`echo "$dir1" | sed -e "$sed_rest"`
  done
  reldir="$dir2"
}

# func_relconcat DIR1 DIR2
# computes a relative pathname DIR1/DIR2, with obvious simplifications.
# Input:
# - DIR1            relative pathname, relative to the current directory
# - DIR2            relative pathname, relative to DIR1
# Output:
# - relconcat       DIR1/DIR2, relative to the current directory
func_relconcat ()
{
  dir1="$1"
  dir2="$2"
  sed_first='s,^\([^/]*\)/.*$,\1,'
  sed_rest='s,^[^/]*/*,,'
  sed_last='s,^.*/\([^/]*\)$,\1,'
  sed_butlast='s,/*[^/]*$,,'
  while true; do
    first=`echo "$dir2" | sed -e "$sed_first"`
    if test "$first" = "."; then
      dir2=`echo "$dir2" | sed -e "$sed_rest"`
      if test -z "$dir2"; then
        relconcat="$dir1"
        break
      fi
    else
      last=`echo "$dir1" | sed -e "$sed_last"`
      while test "$last" = "."; do
        dir1=`echo "$dir1" | sed -e "$sed_butlast"`
        last=`echo "$dir1" | sed -e "$sed_last"`
      done
      if test -z "$dir1"; then
        relconcat="$dir2"
        break
      fi
      if test "$first" = ".."; then
        if test "$last" = ".."; then
          relconcat="$dir1/$dir2"
          break
        fi
        dir1=`echo "$dir1" | sed -e "$sed_butlast"`
        dir2=`echo "$dir2" | sed -e "$sed_rest"`
        if test -z "$dir1"; then
          relconcat="$dir2"
          break
        fi
        if test -z "$dir2"; then
          relconcat="$dir1"
          break
        fi
      else
        relconcat="$dir1/$dir2"
        break
      fi
    fi
  done
}

# func_ln SRC DEST
# Like ln -s, except that SRC is given relative to the current directory (or
# absolute), not given relative to the directory of DEST.
func_ln ()
{
  case "$1" in
    /*)
      ln -s "$1" "$2" ;;
    *) # SRC is relative.
      case "$2" in
        /*)
          ln -s "`pwd`/$1" "$2" ;;
        *) # DEST is relative too.
          ln_destdir=`echo "$2" | sed -e 's,[^/]*$,,'`
          test -n "$ln_destdir" || ln_destdir="."
          func_relativize "$ln_destdir" "$1"
          ln -s "$reldir" "$2"
          ;;
      esac
      ;;
  esac
}

# func_ln_if_changed SRC DEST
# Like func_ln, but avoids munging timestamps if the link is correct.
func_ln_if_changed ()
{
  if test $# -ne 2; then
    echo "usage: func_ln_if_changed SRC DEST" >&2
  fi
  ln_target=`func_readlink "$2"`
  if test -h "$2" && test "$1" = "$ln_target"; then
    :
  else
    rm -f "$2"
    func_ln "$1" "$2"
  fi
}

# Ensure an 'echo' command that does not interpret backslashes.
# Test cases:
#   echo '\n' | wc -l                 prints 1 when OK, 2 when KO
#   echo '\t' | grep t > /dev/null    has return code 0 when OK, 1 when KO
# This problem is a weird heritage from SVR4. BSD got it right (except that
# BSD echo interprets '-n' as an option, which is also not desirable).
# Nowadays the problem occurs in 4 situations:
# - in bash, when the shell option xpg_echo is set (bash >= 2.04)
#            or when it was built with --enable-usg-echo-default (bash >= 2.0)
#            or when it was built with DEFAULT_ECHO_TO_USG (bash < 2.0),
# - in zsh, when sh-emulation is not set,
# - in ksh (e.g. AIX /bin/sh and Solaris /usr/xpg4/bin/sh are ksh instances,
#           and HP-UX /bin/sh and IRIX /bin/sh behave similarly),
# - in Solaris /bin/sh and OSF/1 /bin/sh.
# We try the following workarounds:
# - for all: respawn using $CONFIG_SHELL if that is set and works.
# - for bash >= 2.04: unset the shell option xpg_echo.
# - for bash >= 2.0: define echo to a function that uses the printf built-in.
# - for bash < 2.0: define echo to a function that uses cat of a here document.
# - for zsh: turn sh-emulation on.
# - for ksh: alias echo to 'print -r'.
# - for ksh: alias echo to a function that uses cat of a here document.
# - for Solaris /bin/sh and OSF/1 /bin/sh: respawn using /bin/ksh and rely on
#   the ksh workaround.
# - otherwise: respawn using /bin/sh and rely on the workarounds.
# When respawning, we pass --no-reexec as first argument, so as to avoid
# turning this script into a fork bomb in unlucky situations.
have_echo=
if echo '\t' | grep t > /dev/null; then
  have_echo=yes # Lucky!
fi
# Try the workarounds.
# Respawn using $CONFIG_SHELL if that is set and works.
if test -z "$have_echo" \
   && test "X$1" != "X--no-reexec" \
   && test -n "$CONFIG_SHELL" \
   && test -f "$CONFIG_SHELL" \
   && $CONFIG_SHELL -c 'echo '\t' | grep t > /dev/null'; then
  exec $CONFIG_SHELL "$0" --no-reexec "$@"
  exit 127
fi
# For bash >= 2.04: unset the shell option xpg_echo.
if test -z "$have_echo" \
   && test -n "$BASH_VERSION" \
   && (shopt -o xpg_echo; echo '\t' | grep t > /dev/null) 2>/dev/null; then
  shopt -o xpg_echo
  have_echo=yes
fi
# For bash >= 2.0: define echo to a function that uses the printf built-in.
# For bash < 2.0: define echo to a function that uses cat of a here document.
# (There is no win in using 'printf' over 'cat' if it is not a shell built-in.)
if test -z "$have_echo" \
   && test -n "$BASH_VERSION"; then \
  if type printf 2>/dev/null | grep / > /dev/null; then
    # 'printf' is not a shell built-in.
echo ()
{
cat <<EOF
$*
EOF
}
  else
    # 'printf' is a shell built-in.
echo ()
{
  printf '%s\n' "$*"
}
  fi
  if echo '\t' | grep t > /dev/null; then
    have_echo=yes
  fi
fi
# For zsh: turn sh-emulation on.
if test -z "$have_echo" \
   && test -n "$ZSH_VERSION" \
   && (emulate sh) >/dev/null 2>&1; then
  emulate sh
fi
# For ksh: alias echo to 'print -r'.
if test -z "$have_echo" \
   && (type print) >/dev/null 2>&1; then
  # A 'print' command exists.
  if type print 2>/dev/null | grep / > /dev/null; then
    :
  else
    # 'print' is a shell built-in.
    if (print -r '\told' | grep told > /dev/null) 2>/dev/null; then
      # 'print' is the ksh shell built-in.
      alias echo='print -r'
    fi
  fi
fi
if test -z "$have_echo" \
   && echo '\t' | grep t > /dev/null; then
  have_echo=yes
fi
# For ksh: alias echo to a function that uses cat of a here document.
# The ksh manual page says:
#   "Aliasing is performed when scripts are read, not while they are executed.
#    Therefore, for an alias to take effect, the alias definition command has
#    to be executed before the command which references the alias is read."
# Because of this, we have to play strange tricks with have_echo, to ensure
# that the top-level statement containing the test starts after the 'alias'
# command.
if test -z "$have_echo"; then
bsd_echo ()
{
cat <<EOF
$*
EOF
}
alias echo=bsd_echo 2>/dev/null
fi
if test -z "$have_echo" \
   && echo '\t' | grep t > /dev/null; then
  have_echo=yes
fi
if test -z "$have_echo"; then
  unalias echo 2>/dev/null
fi
# For Solaris /bin/sh and OSF/1 /bin/sh: respawn using /bin/ksh.
if test -z "$have_echo" \
   && test "X$1" != "X--no-reexec" \
   && test -f /bin/ksh; then
  exec /bin/ksh "$0" --no-reexec "$@"
  exit 127
fi
# Otherwise: respawn using /bin/sh.
if test -z "$have_echo" \
   && test "X$1" != "X--no-reexec" \
   && test -f /bin/sh; then
  exec /bin/sh "$0" --no-reexec "$@"
  exit 127
fi
if test -z "$have_echo"; then
  func_fatal_error "Shell does not support 'echo' correctly. Please install GNU bash and set the environment variable CONFIG_SHELL to point to it."
fi
if echo '\t' | grep t > /dev/null; then
  : # Works fine now.
else
  func_fatal_error "Shell does not support 'echo' correctly. Workaround does not work. Please report this as a bug to bug-gnulib@gnu.org."
fi
if test "X$1" = "X--no-reexec"; then
  shift
fi

# Command-line option processing.
# Removes the OPTIONS from the arguments. Sets the variables:
# - mode            list or import or create-testdir or create-megatestdir
# - destdir         from --dir
# - local_gnulib_dir  from --local-dir
# - verbose         integer, default 0, inc/decremented by --verbose/--quiet
# - libname, supplied_libname  from --lib
# - sourcebase      from --source-base
# - m4base          from --m4-base
# - pobase          from --po-base
# - docbase         from --doc-base
# - testsbase       from --tests-base
# - auxdir          from --aux-dir
# - inctests        true if --with-tests was given, blank otherwise
# - avoidlist       list of modules to avoid, from --avoid
# - lgpl            yes or a number if --lgpl was given, blank otherwise
# - makefile_name   from --makefile-name
# - libtool         true if --libtool was given, false if --no-libtool was
#                   given, blank otherwise
# - macro_prefix    from --macro-prefix
# - po_domain       from --po-domain
# - autoconf_minversion  minimum supported autoconf version
# - do_changelog    false if --no-changelog was given, : otherwise
# - doit            : if actions shall be executed, false if only to be printed
# - symbolic        true if --symlink or --more-symlinks was given, blank
#                   otherwise
# - lsymbolic       true if --local-symlink was given, blank otherwise
# - do_copyrights   blank if --more-symlinks was given, true otherwise
{
  mode=
  destdir=
  local_gnulib_dir=
  verbose=0
  libname=libgnu
  supplied_libname=
  sourcebase=
  m4base=
  pobase=
  docbase=
  testsbase=
  auxdir=
  inctests=
  avoidlist=
  lgpl=
  makefile_name=
  libtool=
  macro_prefix=
  po_domain=
  do_changelog=:
  doit=:
  symbolic=
  lsymbolic=
  do_copyrights=true

  supplied_opts="$@"

  while test $# -gt 0; do
    case "$1" in
      --list | --lis )
        mode=list
        shift ;;
      --import | --impor | --impo | --imp | --im | --i )
        mode=import
        shift ;;
      --update | --updat | --upda | --upd | --up | --u )
        mode=update
        shift ;;
      --create-testdir | --create-testdi | --create-testd | --create-test | --create-tes | --create-te | --create-t )
        mode=create-testdir
        shift ;;
      --create-megatestdir | --create-megatestdi | --create-megatestd | --create-megatest | --create-megates | --create-megate | --create-megat | --create-mega | --create-meg | --create-me | --create-m )
        mode=create-megatestdir
        shift ;;
      --test | --tes | --te | --t )
        mode=test
        shift ;;
      --megatest | --megates | --megate | --megat | --mega | --meg | --me | --m )
        mode=megatest
        shift ;;
      --extract-* )
        mode=`echo "X$1" | sed -e 's/^X--//'`
        shift ;;
      --dir )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --dir"
        fi
        destdir=$1
        shift ;;
      --dir=* )
        destdir=`echo "X$1" | sed -e 's/^X--dir=//'`
        shift ;;
      --local-dir )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --local-dir"
        fi
        local_gnulib_dir=$1
        shift ;;
      --local-dir=* )
        local_gnulib_dir=`echo "X$1" | sed -e 's/^X--local-dir=//'`
        shift ;;
      --verbose | --verbos | --verbo | --verb )
        verbose=`expr $verbose + 1`
        shift ;;
      --quiet | --quie | --qui | --qu | --q )
        verbose=`expr $verbose - 1`
        shift ;;
      --lib )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --lib"
        fi
        libname=$1
        supplied_libname=true
        shift ;;
      --lib=* )
        libname=`echo "X$1" | sed -e 's/^X--lib=//'`
        supplied_libname=true
        shift ;;
      --source-base )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --source-base"
        fi
        sourcebase=$1
        shift ;;
      --source-base=* )
        sourcebase=`echo "X$1" | sed -e 's/^X--source-base=//'`
        shift ;;
      --m4-base )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --m4-base"
        fi
        m4base=$1
        shift ;;
      --m4-base=* )
        m4base=`echo "X$1" | sed -e 's/^X--m4-base=//'`
        shift ;;
      --po-base )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --po-base"
        fi
        pobase=$1
        shift ;;
      --po-base=* )
        pobase=`echo "X$1" | sed -e 's/^X--po-base=//'`
        shift ;;
      --doc-base )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --doc-base"
        fi
        docbase=$1
        shift ;;
      --doc-base=* )
        docbase=`echo "X$1" | sed -e 's/^X--doc-base=//'`
        shift ;;
      --tests-base )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --tests-base"
        fi
        testsbase=$1
        shift ;;
      --tests-base=* )
        testsbase=`echo "X$1" | sed -e 's/^X--tests-base=//'`
        shift ;;
      --aux-dir )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --aux-dir"
        fi
        auxdir=$1
        shift ;;
      --aux-dir=* )
        auxdir=`echo "X$1" | sed -e 's/^X--aux-dir=//'`
        shift ;;
      --with-tests )
        inctests=true
        shift ;;
      --avoid )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --avoid"
        fi
        func_append avoidlist " $1"
        shift ;;
      --avoid=* )
        arg=`echo "X$1" | sed -e 's/^X--avoid=//'`
        func_append avoidlist " $arg"
        shift ;;
      --lgpl )
        lgpl=yes
        shift ;;
      --lgpl=* )
        arg=`echo "X$1" | sed -e 's/^X--lgpl=//'`
        case "$arg" in
          2 | 3) ;;
          *) func_fatal_error "invalid LGPL version number for --lgpl" ;;
        esac
        lgpl=$arg
        shift ;;
      --makefile-name )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --makefile-name"
        fi
        makefile_name="$1"
        shift ;;
      --makefile-name=* )
        makefile_name=`echo "X$1" | sed -e 's/^X--makefile-name=//'`
        shift ;;
      --libtool )
        libtool=true
        shift ;;
      --no-libtool )
        libtool=false
        shift ;;
      --macro-prefix )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --macro-prefix"
        fi
        macro_prefix="$1"
        shift ;;
      --macro-prefix=* )
        macro_prefix=`echo "X$1" | sed -e 's/^X--macro-prefix=//'`
        shift ;;
      --po-domain )
        shift
        if test $# = 0; then
          func_fatal_error "missing argument for --po-domain"
        fi
        po_domain="$1"
        shift ;;
      --po-domain=* )
        po_domain=`echo "X$1" | sed -e 's/^X--po-domain=//'`
        shift ;;
      --no-changelog | --no-changelo | --no-changel | --no-change | --no-chang | --no-chan | --no-cha | --no-ch | --no-c )
        do_changelog=false
        shift ;;
      --dry-run )
        doit=false
        shift ;;
      -s | --symbolic | --symboli | --symbol | --symbo | --symb | --symlink | --symlin | --symli | --syml | --sym | --sy )
        symbolic=true
        shift ;;
      --local-symlink | --local-symlin | --local-symli | --local-syml | --local-sym | --local-sy | --local-s )
        lsymbolic=true
        shift ;;
      -S | --more-symlinks | --more-symlink | --more-symlin | --more-symli | --more-syml | --more-sym | --more-sy | --more-s | --more- | --more | --mor | --mo )
        symbolic=true
        do_copyrights=
        shift ;;
      --help | --hel | --he | --h )
        func_usage
        func_exit $? ;;
      --version | --versio | --versi | --vers )
        func_version
        func_exit $? ;;
      -- )
        # Stop option processing
        shift
        break ;;
      -* )
        echo "gnulib-tool: unknown option $1" 1>&2
        echo "Try 'gnulib-tool --help' for more information." 1>&2
        func_exit 1 ;;
      * )
        break ;;
    esac
  done

  if test "$mode" = update; then
    if test $# != 0; then
      echo "gnulib-tool: too many arguments in 'update' mode" 1>&2
      echo "Try 'gnulib-tool --help' for more information." 1>&2
      echo "If you really want to modify the gnulib configuration of your project," 1>&2
      echo "you need to use 'gnulib --import' - at your own risk!" 1>&2
      func_exit 1
    fi
    if test -n "$local_gnulib_dir" || test -n "$supplied_libname" \
       || test -n "$sourcebase" || test -n "$m4base" || test -n "$pobase" \
       || test -n "$docbase" || test -n "$testsbase" || test -n "$auxdir" \
       || test -n "$inctests" || test -n "$avoidlist" || test -n "$lgpl" \
       || test -n "$makefile_name" || test -n "$macro_prefix" \
       || test -n "$po_domain"; then
      echo "gnulib-tool: invalid options for 'update' mode" 1>&2
      echo "Try 'gnulib-tool --help' for more information." 1>&2
      echo "If you really want to modify the gnulib configuration of your project," 1>&2
      echo "you need to use 'gnulib --import' - at your own risk!" 1>&2
      func_exit 1
    fi
    do_changelog=false
  fi
  if test -n "$pobase" && test -z "$po_domain"; then
    echo "gnulib-tool: together with --po-base, you need to specify --po-domain" 1>&2
    echo "Try 'gnulib-tool --help' for more information." 1>&2
    func_exit 1
  fi
  if test -z "$pobase" && test -n "$po_domain"; then
    echo "gnulib-tool: warning: --po-domain has no effect without a --po-base option" 1>&2
  fi

  # Determine the minimum supported autoconf version from the project's
  # configure.ac.
  DEFAULT_AUTOCONF_MINVERSION="2.59"
  autoconf_minversion=
  configure_ac=
  if { test "$mode" = import || test "$mode" = update; } && test -n "$destdir"; then
    if test -f "$destdir"/configure.ac; then
      configure_ac="$destdir/configure.ac"
    else
      if test -f "$destdir"/configure.in; then
        configure_ac="$destdir/configure.in"
      fi
    fi
  else
    if test -f configure.ac; then
      configure_ac="configure.ac"
    else
      if test -f configure.in; then
        configure_ac="configure.in"
      fi
    fi
  fi
  if test -n "$configure_ac"; then
    # Use sed, not autoconf --trace, to look for the AC_PREREQ invocation,
    # because when some m4 files are omitted from a CVS repository,
    # "autoconf --trace=AC_PREREQ" fails with an error message like this:
    #   m4: aclocal.m4:851: Cannot open m4/absolute-header.m4: No such file or directory
    #   autom4te: m4 failed with exit status: 1
    prereqs=
    my_sed_traces='
      s,#.*$,,
      s,^dnl .*$,,
      s, dnl .*$,,
      /AC_PREREQ/ {
        s,^.*AC_PREREQ([[ ]*\([^])]*\).*$,\1,p
      }'
    prereqs=`sed -n -e "$my_sed_traces" < "$configure_ac"`
    if test -n "$prereqs"; then
      autoconf_minversion=`
        for version in $prereqs; do echo $version; done |
        LC_ALL=C sort -nru | sed 1q
      `
    fi
  fi
  if test -z "$autoconf_minversion"; then
    autoconf_minversion=$DEFAULT_AUTOCONF_MINVERSION
  fi
  case "$autoconf_minversion" in
    1.* | 2.[0-4]* | 2.5[0-8]*)
      func_fatal_error "minimum supported autoconf version is 2.59. Try adding AC_PREREQ([$DEFAULT_AUTOCONF_MINVERSION]) to your configure.ac." ;;
  esac

  # Remove trailing slashes from the directory names. This is necessary for
  # m4base (to avoid an error in func_import) and optional for the others.
  sed_trimtrailingslashes='s,\([^/]\)//*$,\1,'
  case "$local_gnulib_dir" in
    */ ) local_gnulib_dir=`echo "$local_gnulib_dir" | sed -e "$sed_trimtrailingslashes"` ;;
  esac
  case "$sourcebase" in
    */ ) sourcebase=`echo "$sourcebase" | sed -e "$sed_trimtrailingslashes"` ;;
  esac
  case "$m4base" in
    */ ) m4base=`echo "$m4base" | sed -e "$sed_trimtrailingslashes"` ;;
  esac
  case "$pobase" in
    */ ) pobase=`echo "$pobase" | sed -e "$sed_trimtrailingslashes"` ;;
  esac
  case "$docbase" in
    */ ) docbase=`echo "$docbase" | sed -e "$sed_trimtrailingslashes"` ;;
  esac
  case "$testsbase" in
    */ ) testsbase=`echo "$testsbase" | sed -e "$sed_trimtrailingslashes"` ;;
  esac
  case "$auxdir" in
    */ ) auxdir=`echo "$auxdir" | sed -e "$sed_trimtrailingslashes"` ;;
  esac
}

case "$0" in
  /*) self_abspathname="$0" ;;
  */*) self_abspathname=`pwd`/"$0" ;;
  *)
    # Look in $PATH.
    # Iterate through the elements of $PATH.
    # We use IFS=: instead of
    #   for d in `echo ":$PATH:" | sed -e 's/:::*/:.:/g' | sed -e 's/:/ /g'`
    # because the latter does not work when some PATH element contains spaces.
    # We use a canonicalized $pathx instead of $PATH, because empty PATH
    # elements are by definition equivalent to '.', however field splitting
    # according to IFS=: loses empty fields in many shells:
    #   - /bin/sh on OSF/1 and Solaris loses all empty fields (at the
    #     beginning, at the end, and in the middle),
    #   - /bin/sh on IRIX and /bin/ksh on IRIX and OSF/1 lose empty fields
    #     at the beginning and at the end,
    #   - GNU bash, /bin/sh on AIX and HP-UX, and /bin/ksh on AIX, HP-UX,
    #     Solaris lose empty fields at the end.
    # The 'case' statement is an optimization, to avoid evaluating the
    # explicit canonicalization command when $PATH contains no empty fields.
    self_abspathname=
    if test "${PATH_SEPARATOR+set}" != set; then
      func_tmpdir
      { echo "#! /bin/sh"; echo "exit 0"; } > "$tmp"/conf.sh
      chmod +x "$tmp"/conf.sh
      if (PATH="/nonexistent;$tmp"; conf.sh) >/dev/null 2>&1; then
        PATH_SEPARATOR=';'
      else
        PATH_SEPARATOR=:
      fi
      rm -rf "$tmp"
    fi
    if test "$PATH_SEPARATOR" = ";"; then
      # On Windows, programs are searched in "." before $PATH.
      pathx=".;$PATH"
    else
      # On Unix, we have to convert empty PATH elements to ".".
      pathx="$PATH"
      case :$PATH: in
        *::*)
          pathx=`echo ":$PATH:" | sed -e 's/:::*/:.:/g' -e 's/^://' -e 's/:\$//'`
          ;;
      esac
    fi
    save_IFS="$IFS"
    IFS="$PATH_SEPARATOR"
    for d in $pathx; do
      IFS="$save_IFS"
      test -z "$d" && d=.
      if test -x "$d/$0" && test ! -d "$d/$0"; then
        self_abspathname="$d/$0"
        break
      fi
    done
    IFS="$save_IFS"
    if test -z "$self_abspathname"; then
      func_fatal_error "could not locate the gnulib-tool program - how did you invoke it?"
    fi
    ;;
esac
while test -h "$self_abspathname"; do
  # Resolve symbolic link.
  linkval=`func_readlink "$self_abspathname"`
  test -n "$linkval" || break
  case "$linkval" in
    /* ) self_abspathname="$linkval" ;;
    * ) self_abspathname=`echo "$self_abspathname" | sed -e 's,/[^/]*$,,'`/"$linkval" ;;
  esac
done
gnulib_dir=`echo "$self_abspathname" | sed -e 's,/[^/]*$,,'`

func_tmpdir
trap 'exit_status=$?
      if test "$signal" != 0; then
        echo "caught signal $signal" >&2
      fi
      rm -rf "$tmp"
      exit $exit_status' 0
for signal in 1 2 3 13 15; do
  trap '{ signal='$signal'; func_exit 1; }' $signal
done
signal=0

# func_lookup_file file
# looks up a file in $local_gnulib_dir or $gnulib_dir, or combines it through
# 'patch'.
# Input:
# - local_gnulib_dir  from --local-dir
# Output:
# - lookedup_file   name of the merged (combined) file
# - lookedup_tmp    true if it is located in the tmp directory, blank otherwise
func_lookup_file ()
{
  lkfile="$1"
  if test -n "$local_gnulib_dir" && test -f "$local_gnulib_dir/$lkfile"; then
    lookedup_file="$local_gnulib_dir/$lkfile"
    lookedup_tmp=
  else
    if test -f "$gnulib_dir/$lkfile"; then
      if test -n "$local_gnulib_dir" && test -f "$local_gnulib_dir/$lkfile.diff"; then
        lkbase=`echo "$lkfile" | sed -e 's,^.*/,,'`
        rm -f "$tmp/$lkbase"
        cp "$gnulib_dir/$lkfile" "$tmp/$lkbase"
        patch -s "$tmp/$lkbase" < "$local_gnulib_dir/$lkfile.diff" \
          || func_fatal_error "patch file $local_gnulib_dir/$lkfile.diff didn't apply cleanly"
        lookedup_file="$tmp/$lkbase"
        lookedup_tmp=true
      else
        lookedup_file="$gnulib_dir/$lkfile"
        lookedup_tmp=
      fi
    else
      func_fatal_error "file $gnulib_dir/$lkfile not found"
    fi
  fi
}

# func_all_modules
# Input:
# - local_gnulib_dir  from --local-dir
func_all_modules ()
{
  # Filter out metainformation files like README, which are not modules.
  # Filter out unit test modules; they can be retrieved through
  # --extract-tests-module if desired.
  {
    (cd "$gnulib_dir" && find modules -type f -print | sed -e 's,^modules/,,')
    if test -n "$local_gnulib_dir" && test -d "$local_gnulib_dir/modules"; then
      (cd "$local_gnulib_dir" && find modules -type f -print | sed -e 's,^modules/,,' -e 's,\.diff$,,')
    fi
  } \
      | sed -e '/^CVS\//d' -e '/\/CVS\//d' \
            -e '/^ChangeLog$/d' -e '/\/ChangeLog$/d' \
            -e '/^COPYING$/d' -e '/\/COPYING$/d' \
            -e '/^README$/d' -e '/\/README$/d' \
            -e '/^TEMPLATE$/d' \
            -e '/^TEMPLATE-EXTENDED$/d' \
            -e '/^TEMPLATE-TESTS$/d' \
            -e '/^\..*/d' \
            -e '/~$/d' \
      | sed -e '/-tests$/d' \
      | LC_ALL=C sort -u
}

# func_verify_module
# verifies a module name
# Input:
# - local_gnulib_dir  from --local-dir
# - module          module name argument
func_verify_module ()
{
  if { test -f "$gnulib_dir/modules/$module" \
       || { test -n "$local_gnulib_dir" && test -d "$local_gnulib_dir/modules" \
            && test -f "$local_gnulib_dir/modules/$module"; }; } \
     && test "CVS" != "$module" \
     && test "ChangeLog" != "$module" \
     && test "COPYING" != "$module" \
     && test "README" != "$module" \
     && test "TEMPLATE" != "$module" \
     && test "TEMPLATE-EXTENDED" != "$module" \
     && test "TEMPLATE-TESTS" != "$module"; then
    # OK, $module is a correct module name.
    # Verify that building the module description with 'patch' succeeds.
    func_lookup_file "modules/$module"
  else
    echo "gnulib-tool: module $module doesn't exist" 1>&2
    module=
  fi
}

# func_verify_nontests_module
# verifies a module name, excluding tests modules
# Input:
# - local_gnulib_dir  from --local-dir
# - module          module name argument
func_verify_nontests_module ()
{
  case "$module" in
    *-tests ) module= ;;
    * ) func_verify_module ;;
  esac
}

# func_verify_tests_module
# verifies a module name, considering only tests modules
# Input:
# - local_gnulib_dir  from --local-dir
# - module          module name argument
func_verify_tests_module ()
{
  case "$module" in
    *-tests ) func_verify_module ;;
    * ) module= ;;
  esac
}

sed_extract_prog=':[     ]*$/ {
  :a
    n
    s/^Description:[     ]*$//
    s/^Notice:[  ]*$//
    s/^Files:[   ]*$//
    s/^Depends-on:[      ]*$//
    s/^configure\.ac-early:[     ]*$//
    s/^configure\.ac:[   ]*$//
    s/^Makefile\.am:[    ]*$//
    s/^Include:[         ]*$//
    s/^Link:[    ]*$//
    s/^License:[         ]*$//
    s/^Maintainer:[      ]*$//
    tb
    p
    ba
  :b
}'

# func_get_description module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_description ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^Description$sed_extract_prog" < "$lookedup_file"
}

# func_get_notice module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_notice ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^Notice$sed_extract_prog" < "$lookedup_file"
}

# func_get_filelist module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_filelist ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^Files$sed_extract_prog" < "$lookedup_file"
  echo m4/gnulib-common.m4
  case "$autoconf_minversion" in
    2.59)
      #echo m4/onceonly.m4
      echo m4/onceonly_2_57.m4
      ;;
  esac
}

# func_get_dependencies module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_dependencies ()
{
  # ${module}-tests always implicitly depends on ${module}.
  echo "$1" | sed -n -e 's/-tests$//p'
  # Then the explicit dependencies listed in the module description.
  func_lookup_file "modules/$1"
  sed -n -e "/^Depends-on$sed_extract_prog" < "$lookedup_file"
}

# func_get_autoconf_early_snippet module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_autoconf_early_snippet ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^configure\.ac-early$sed_extract_prog" < "$lookedup_file"
}

# func_get_autoconf_snippet module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_autoconf_snippet ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^configure\.ac$sed_extract_prog" < "$lookedup_file"
}

# func_get_automake_snippet module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_automake_snippet ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^Makefile\.am$sed_extract_prog" < "$lookedup_file"
  case "$1" in
    *-tests)
      # *-tests module live in tests/, not lib/.
      # Synthesize an EXTRA_DIST augmentation.
      all_files=`func_get_filelist $1`
      tests_files=`for f in $all_files; do \
                     case $f in \
                       tests/*) echo $f ;; \
                     esac; \
                   done | sed -e 's,^tests/,,'`
      extra_files="$tests_files"
      if test -n "$extra_files"; then
        echo "EXTRA_DIST +=" $extra_files
        echo
      fi
      ;;
    *)
      # Synthesize an EXTRA_DIST augmentation.
      sed_combine_lines='/\\$/{
        :a
        N
        s/\\\n/ /
        s/\\$/\\/
        ta
      }'
      sed_extract_mentioned_files='s/^lib_SOURCES[       ]*+=[   ]*//p'
      already_mentioned_files=` \
        sed -n -e "/^Makefile\.am$sed_extract_prog" < "$lookedup_file" \
        | sed -e "$sed_combine_lines" \
        | sed -n -e "$sed_extract_mentioned_files" | sed -e 's/#.*//'`
      all_files=`func_get_filelist $1`
      lib_files=`for f in $all_files; do \
                   case $f in \
                     lib/*) echo $f ;; \
                   esac; \
                 done | sed -e 's,^lib/,,'`
      # Remove $already_mentioned_files from $lib_files.
      echo "$lib_files" | LC_ALL=C sort -u > "$tmp"/lib-files
      extra_files=`for f in $already_mentioned_files; do echo $f; done \
                   | LC_ALL=C sort -u | LC_ALL=C join -v 2 - "$tmp"/lib-files`
      if test -n "$extra_files"; then
        echo "EXTRA_DIST +=" $extra_files
        echo
      fi
      # Synthesize also an EXTRA_lib_SOURCES augmentation.
      # This is necessary so that automake can generate the right list of
      # dependency rules.
      # A possible approach would be to use autom4te --trace of the redefined
      # AC_LIBOBJ and AC_REPLACE_FUNCS macros when creating the Makefile.am
      # (use autom4te --trace, not just grep, so that AC_LIBOBJ invocations
      # inside autoconf's built-in macros are not missed).
      # But it's simpler and more robust to do it here, based on the file list.
      # If some .c file exists and is not used with AC_LIBOBJ - for example,
      # a .c file is preprocessed into another .c file for BUILT_SOURCES -,
      # automake will generate a useless dependency; this is harmless.
      case "$1" in
        relocatable-prog-wrapper) ;;
        *)
          sed_extract_c_files='/\.c$/p'
          extra_files=`echo "$extra_files" | sed -n -e "$sed_extract_c_files"`
          if test -n "$extra_files"; then
            echo "EXTRA_lib_SOURCES +=" $extra_files
            echo
          fi
          ;;
      esac
      # Synthesize an EXTRA_DIST augmentation also for the files in build-aux/.
      buildaux_files=`for f in $all_files; do \
                        case $f in \
                          build-aux/*) echo $f ;; \
                        esac; \
                      done | sed -e 's,^build-aux/,,'`
      if test -n "$buildaux_files"; then
        sed_prepend_auxdir='s,^,$(top_srcdir)/'"$auxdir"'/,'
        echo "EXTRA_DIST += "`echo "$buildaux_files" | sed -e "$sed_prepend_auxdir"`
        echo
      fi
      ;;
  esac
}

# func_get_include_directive module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_include_directive ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^Include$sed_extract_prog" < "$lookedup_file" | \
  sed -e 's/^\(["<]\)/#include \1/'
}

# func_get_link_directive module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_link_directive ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^Link$sed_extract_prog" < "$lookedup_file"
}

# func_get_license module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_license ()
{
  func_lookup_file "modules/$1"
  { sed -n -e "/^License$sed_extract_prog" < "$lookedup_file"
    # The default is GPL.
    echo "GPL"
  } | sed -e 's,^ *$,,' | sed -e 1q
}

# func_get_maintainer module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_maintainer ()
{
  func_lookup_file "modules/$1"
  sed -n -e "/^Maintainer$sed_extract_prog" < "$lookedup_file"
}

# func_get_tests_module module
# Input:
# - local_gnulib_dir  from --local-dir
func_get_tests_module ()
{
  # The naming convention for tests modules is hardwired: ${module}-tests.
  if test -f "$gnulib_dir/modules/$1"-tests \
     || { test -n "$local_gnulib_dir" && test -d "$local_gnulib_dir/modules" \
          && test -f "$local_gnulib_dir/modules/$1"-tests; }; then
    echo "$1"-tests
  fi
}

# func_acceptable module
# tests whether a module is acceptable.
# Input:
# - avoidlist       list of modules to avoid
func_acceptable ()
{
  for avoid in $avoidlist; do
    if test "$avoid" = "$1"; then
      return 1
    fi
  done
  return 0
}

# func_modules_transitive_closure
# Input:
# - local_gnulib_dir  from --local-dir
# - modules         list of specified modules
# - inctests        true if tests should be included, blank otherwise
# - avoidlist       list of modules to avoid
# - tmp             pathname of a temporary directory
# Output:
# - modules         list of modules, including dependencies
func_modules_transitive_closure ()
{
  # In order to process every module only once (for speed), process an "input
  # list" of modules, producing an "output list" of modules. During each round,
  # more modules can be queued in the input list. Once a module on the input
  # list has been processed, it is added to the "handled list", so we can avoid
  # to process it again.
  handledmodules=
  inmodules="$modules"
  outmodules=
  while test -n "$inmodules"; do
    inmodules_this_round="$inmodules"
    inmodules=                    # Accumulator, queue for next round
    for module in $inmodules_this_round; do
      func_verify_module
      if test -n "$module"; then
        if func_acceptable $module; then
          func_append outmodules " $module"
          deps=`func_get_dependencies $module`
          # Duplicate dependencies are harmless, but Jim wants a warning.
          duplicated_deps=`echo "$deps" | LC_ALL=C sort | LC_ALL=C uniq -d`
          if test -n "$duplicated_deps"; then
            echo "warning: module $module has duplicated dependencies: "`echo $duplicated_deps` 1>&2
          fi
          func_append inmodules " $deps"
          if test -n "$inctests"; then
            testsmodule=`func_get_tests_module $module`
            if test -n "$testsmodule"; then
              func_append inmodules " $testsmodule"
            fi
          fi
        fi
      fi
    done
    handledmodules=`for m in $handledmodules $inmodules_this_round; do echo $m; done | LC_ALL=C sort -u`
    # Remove $handledmodules from $inmodules.
    for m in $inmodules; do echo $m; done | LC_ALL=C sort -u > "$tmp"/queued-modules
    inmodules=`echo "$handledmodules" | LC_ALL=C join -v 2 - "$tmp"/queued-modules`
  done
  modules=`for m in $outmodules; do echo $m; done | LC_ALL=C sort -u`
  rm -f "$tmp"/queued-modules
}

# func_modules_add_dummy
# Input:
# - local_gnulib_dir  from --local-dir
# - modules         list of modules, including dependencies
# Output:
# - modules         list of modules, including 'dummy' if needed
func_modules_add_dummy ()
{
  have_lib_SOURCES=
  sed_remove_backslash_newline=':a
/\\$/{
s/\\$//
N
s/\n//
ba
}'
  for module in $modules; do
    func_verify_nontests_module
    if test -n "$module"; then
      # Extract the value of "lib_SOURCES += ...".
      for file in `func_get_automake_snippet "$module" | sed -e "$sed_remove_backslash_newline" | sed -n -e 's,^lib_SOURCES[     ]*+=\([^#]*\).*$,\1,p'`; do
        # Ignore .h files since they are not compiled.
        case "$file" in
          *.h) ;;
          *) have_lib_SOURCES=yes ;;
        esac
      done
    fi
  done
  # Add the dummy module, to make sure the library will be non-empty.
  if test -z "$have_lib_SOURCES"; then
    if func_acceptable "dummy"; then
      func_append modules " dummy"
    fi
  fi
}

# func_modules_notice
# Input:
# - local_gnulib_dir  from --local-dir
# - verbose         integer, default 0, inc/decremented by --verbose/--quiet
# - modules         list of modules, including dependencies
func_modules_notice ()
{
  if test $verbose -ge -1; then
    for module in $modules; do
      func_verify_module
      if test -n "$module"; then
        msg=`func_get_notice $module`
        if test -n "$msg"; then
          echo "Notice from module $module:"
          echo "$msg" | sed -e 's/^/  /'
        fi
      fi
    done
  fi
}

# func_modules_to_filelist
# Input:
# - local_gnulib_dir  from --local-dir
# - modules         list of modules, including dependencies
# Output:
# - files           list of files
func_modules_to_filelist ()
{
  files=
  for module in $modules; do
    func_verify_module
    if test -n "$module"; then
      fs=`func_get_filelist $module`
      func_append files " $fs"
    fi
  done
  files=`for f in $files; do echo $f; done | LC_ALL=C sort -u`
}

# func_execute_command command [args...]
# Executes a command.
# Uses also the variables
# - verbose         integer, default 0, inc/decremented by --verbose/--quiet
func_execute_command ()
{
  if test $verbose -ge 0; then
    echo "executing $*"
    "$@"
  else
    # Commands like automake produce output to stderr even when the succeed.
    # Turn this output off if the command succeeds.
    "$@" > "$tmp"/cmdout 2>&1
    cmdret=$?
    if test $cmdret = 0; then
      rm -f "$tmp"/cmdout
    else
      echo "executing $*"
      cat "$tmp"/cmdout 1>&2
      rm -f "$tmp"/cmdout
      (exit $cmdret)
    fi
  fi
}

# func_emit_lib_Makefile_am
# emits the contents of library makefile to standard output.
# Input:
# - local_gnulib_dir  from --local-dir
# - modules         list of modules, including dependencies
# - libname         library name
# - pobase          directory relative to destdir where to place *.po files
# - auxdir          directory relative to destdir where to place build aux files
# - makefile_name   from --makefile-name
# - libtool         true if libtool will be used, false or blank otherwise
# - macro_prefix    prefix of gl_LIBOBJS macros to use
# - po_domain       prefix of i18n domain to use (without -gnulib suffix)
# - actioncmd       (optional) command that will reproduce this invocation
# - for_test        true if creating a package for testing, false otherwise
# Output:
# - uses_subdirs    nonempty if object files in subdirs exist
func_emit_lib_Makefile_am ()
{
  # When creating an includable Makefile.am snippet, augment variables with
  # += instead of assigning them.
  if test -n "$makefile_name"; then
    assign='+='
  else
    assign='='
  fi
  if test "$libtool" = true; then
    libext=la
    perhapsLT=LT
    sed_eliminate_LDFLAGS=
  else
    libext=a
    perhapsLT=
    sed_eliminate_LDFLAGS='/^lib_LDFLAGS[        ]*+=/d'
  fi
  if $for_test; then
    # When creating a package for testing: Attempt to provoke failures,
    # especially link errors, already during "make" rather than during
    # "make check", because "make check" is not possible in a cross-compiling
    # situation. Turn check_PROGRAMS into noinst_PROGRAMS.
    sed_transform_check_PROGRAMS='s,check_PROGRAMS,noinst_PROGRAMS,g'
  else
    sed_transform_check_PROGRAMS=
  fi
  echo "## DO NOT EDIT! GENERATED AUTOMATICALLY!"
  echo "## Process this file with automake to produce Makefile.in."
  func_emit_copyright_notice
  if test -n "$actioncmd"; then
    echo "# Reproduce by: $actioncmd"
  fi
  echo
  uses_subdirs=
  {
    for module in $modules; do
      func_verify_nontests_module
      if test -n "$module"; then
        {
          func_get_automake_snippet "$module" |
            sed -e 's,lib_LIBRARIES,lib%_LIBRARIES,g' \
                -e 's,lib_LTLIBRARIES,lib%_LTLIBRARIES,g' \
                -e "$sed_eliminate_LDFLAGS" \
                -e 's,lib_\([A-Z][A-Z]*\),'"${libname}_${libext}"'_\1,g' \
                -e 's,lib%_LIBRARIES,lib_LIBRARIES,g' \
                -e 's,lib%_LTLIBRARIES,lib_LTLIBRARIES,g' \
                -e "$sed_transform_check_PROGRAMS"
          if test "$module" = 'alloca'; then
            echo "${libname}_${libext}_LIBADD += @${perhapsLT}ALLOCA@"
            echo "${libname}_${libext}_DEPENDENCIES += @${perhapsLT}ALLOCA@"
          fi
        } > amsnippet.tmp
        # Skip the contents if its entirely empty.
        if grep '[^      ]' amsnippet.tmp > /dev/null ; then
          echo "## begin gnulib module $module"
          echo
          cat amsnippet.tmp
          echo "## end   gnulib module $module"
          echo
        fi
        rm -f amsnippet.tmp
        # Test whether there are some source files in subdirectories.
        for f in `func_get_filelist "$module"`; do
          case $f in
            lib/*/*.c) uses_subdirs=yes ;;
          esac
        done
      fi
    done
  } > allsnippets.tmp
  if test -z "$makefile_name"; then
    # If there are source files in subdirectories, prevent collision of the
    # object files (example: hash.c and libxml/hash.c).
    subdir_options=
    if test -n "$uses_subdirs"; then
      subdir_options=' subdir-objects'
    fi
    echo "AUTOMAKE_OPTIONS = 1.5 gnits${subdir_options}"
  fi
  echo
  if test -z "$makefile_name"; then
    echo "noinst_HEADERS ="
    echo "noinst_LIBRARIES ="
    echo "noinst_LTLIBRARIES ="
    # Automake versions < 1.9b create an empty pkgdatadir at installation time
    # if you specify pkgdata_DATA to empty. This is a workaround.
    if grep '^pkgdata_DATA *+=' allsnippets.tmp > /dev/null; then
      echo "pkgdata_DATA ="
    fi
    echo "EXTRA_DIST ="
    echo "BUILT_SOURCES ="
    echo "SUFFIXES ="
  fi
  echo "MOSTLYCLEANFILES $assign core *.stackdump"
  if test -z "$makefile_name"; then
    echo "MOSTLYCLEANDIRS ="
    echo "CLEANFILES ="
    echo "DISTCLEANFILES ="
    echo "MAINTAINERCLEANFILES ="
    echo
    echo "AM_CPPFLAGS ="
  fi
  echo
  if LC_ALL=C grep "^[a-zA-Z0-9_]*_${perhapsLT}LIBRARIES *= *$libname\\.$libext\$" allsnippets.tmp > /dev/null; then
    # One of the snippets already specifies an installation location for the
    # library. Don't confuse automake by saying it should not be installed.
    :
  else
    # By default, the generated library should not be installed.
    echo "noinst_${perhapsLT}LIBRARIES += $libname.$libext"
  fi
  echo
  echo "${libname}_${libext}_SOURCES ="
  # Here we use $(LIBOBJS), not @LIBOBJS@. The value is the same. However,
  # automake during its analyses looks for $(LIBOBJS), not for @LIBOBJS@.
  echo "${libname}_${libext}_LIBADD = \$(${macro_prefix}_${perhapsLT}LIBOBJS)"
  echo "${libname}_${libext}_DEPENDENCIES = \$(${macro_prefix}_${perhapsLT}LIBOBJS)"
  echo "EXTRA_${libname}_${libext}_SOURCES ="
  if test "$libtool" = true; then
    echo "${libname}_${libext}_LDFLAGS = \$(AM_LDFLAGS)"
  fi
  echo
  if test -n "$pobase"; then
    echo "AM_CPPFLAGS += -DDEFAULT_TEXT_DOMAIN=\\\"${po_domain}-gnulib\\\""
    echo
  fi
  cat allsnippets.tmp \
    | sed -e 's|\$(top_srcdir)/build-aux/|$(top_srcdir)/'"$auxdir"'/|g'
  echo
  echo "mostlyclean-local: mostlyclean-generic"
  echo "        @for dir in '' \$(MOSTLYCLEANDIRS); do \\"
  echo "          if test -n \"\$\$dir\" && test -d \$\$dir; then \\"
  echo "            echo \"rmdir \$\$dir\"; rmdir \$\$dir; \\"
  echo "          fi; \\"
  echo "        done; \\"
  echo "        :"
  rm -f allsnippets.tmp
}

# func_emit_po_Makevars
# emits the contents of po/ makefile parametrization to standard output.
# Input:
# - local_gnulib_dir  from --local-dir
# - sourcebase      directory relative to destdir where to place source code
# - pobase          directory relative to destdir where to place *.po files
# - po_domain       prefix of i18n domain to use (without -gnulib suffix)
func_emit_po_Makevars ()
{
  echo "## DO NOT EDIT! GENERATED AUTOMATICALLY!"
  func_emit_copyright_notice
  echo
  echo "# Usually the message domain is the same as the package name."
  echo "# But here it has a '-gnulib' suffix."
  echo "DOMAIN = ${po_domain}-gnulib"
  echo
  echo "# These two variables depend on the location of this directory."
  echo "subdir = ${pobase}"
  echo "top_builddir = "`echo "$pobase" | sed -e 's,//*,/,g' -e 's,[^/][^/]*,..,g'`
  echo
  cat <<\EOF
# These options get passed to xgettext.
XGETTEXT_OPTIONS = \
  --keyword=_ --flag=_:1:pass-c-format \
  --keyword=N_ --flag=N_:1:pass-c-format \
  --keyword='proper_name:1,"This is a proper name. See the gettext manual, section Names."' \
  --keyword='proper_name_utf8:1,"This is a proper name. See the gettext manual, section Names."' \
  --flag=error:3:c-format --flag=error_at_line:5:c-format

# This is the copyright holder that gets inserted into the header of the
# $(DOMAIN).pot file.  gnulib is copyrighted by the FSF.
COPYRIGHT_HOLDER = Free Software Foundation, Inc.

# This is the email address or URL to which the translators shall report
# bugs in the untranslated strings:
# - Strings which are not entire sentences, see the maintainer guidelines
#   in the GNU gettext documentation, section 'Preparing Strings'.
# - Strings which use unclear terms or require additional context to be
#   understood.
# - Strings which make invalid assumptions about notation of date, time or
#   money.
# - Pluralisation problems.
# - Incorrect English spelling.
# - Incorrect formatting.
# It can be your email address, or a mailing list address where translators
# can write to without being subscribed, or the URL of a web page through
# which the translators can contact you.
MSGID_BUGS_ADDRESS = bug-gnulib@gnu.org

# This is the list of locale categories, beyond LC_MESSAGES, for which the
# message catalogs shall be used.  It is usually empty.
EXTRA_LOCALE_CATEGORIES =

# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
# context.  Possible values are "yes" and "no".  Set this to yes if the
# package uses functions taking also a message context, like pgettext(), or
# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
USE_MSGCTXT = no
EOF
}

# func_emit_po_POTFILES_in
# emits the file list to be passed to xgettext to standard output.
# Input:
# - local_gnulib_dir  from --local-dir
# - sourcebase      directory relative to destdir where to place source code
# - files           list of new files
func_emit_po_POTFILES_in ()
{
  echo "## DO NOT EDIT! GENERATED AUTOMATICALLY!"
  func_emit_copyright_notice
  echo
  echo "# List of files which contain translatable strings."
  echo "$files" | sed -n -e "s,^lib/,$sourcebase/,p"
}

# func_emit_tests_Makefile_am
# emits the contents of tests makefile to standard output.
# Input:
# - local_gnulib_dir  from --local-dir
# - modules         list of modules, including dependencies
# - libname         library name
# - makefile_name   from --makefile-name
# - libtool         true if libtool will be used, false or blank otherwise
# - sourcebase      relative directory containing lib source code
# - m4base          relative directory containing autoconf macros
# - testsbase       relative directory containing unit test code
# - for_test        true if creating a package for testing, false otherwise
func_emit_tests_Makefile_am ()
{
  if test "$libtool" = true; then
    libext=la
    sed_eliminate_LDFLAGS=
  else
    libext=a
    sed_eliminate_LDFLAGS='/^lib_LDFLAGS[        ]*+=/d'
  fi
  if $for_test; then
    # When creating a package for testing: Attempt to provoke failures,
    # especially link errors, already during "make" rather than during
    # "make check", because "make check" is not possible in a cross-compiling
    # situation. Turn check_PROGRAMS into noinst_PROGRAMS.
    sed_transform_check_PROGRAMS='s,check_PROGRAMS,noinst_PROGRAMS,g'
  else
    sed_transform_check_PROGRAMS=
  fi
  testsbase_inverse=`echo "$testsbase" | sed -e 's,/$,,' | sed -e 's,[^/][^/]*,..,g'`
  echo "## DO NOT EDIT! GENERATED AUTOMATICALLY!"
  echo "## Process this file with automake to produce Makefile.in."
  func_emit_copyright_notice
  echo
  # Generate dependencies here, since it eases the debugging of test failures.
  echo "AUTOMAKE_OPTIONS = 1.5 foreign"
  echo
  echo "ACLOCAL_AMFLAGS = -I ${testsbase_inverse}/${m4base}"
  echo
  (
    for module in $modules; do
      func_verify_tests_module
      if test -n "$module"; then
        {
          func_get_automake_snippet "$module" |
            sed -e 's,lib_LIBRARIES,lib%_LIBRARIES,g' \
                -e 's,lib_LTLIBRARIES,lib%_LTLIBRARIES,g' \
                -e "$sed_eliminate_LDFLAGS" \
                -e 's,lib_\([A-Z][A-Z]*\),'"${libname}_${libext}"'_\1,g' \
                -e 's,lib%_LIBRARIES,lib_LIBRARIES,g' \
                -e 's,lib%_LTLIBRARIES,lib_LTLIBRARIES,g' \
                -e "$sed_transform_check_PROGRAMS"
        } > amsnippet.tmp
        # Skip the contents if its entirely empty.
        if grep '[^      ]' amsnippet.tmp > /dev/null ; then
          echo "## begin gnulib module $module"
          echo
          cat amsnippet.tmp
          echo "## end   gnulib module $module"
          echo
        fi
        rm -f amsnippet.tmp
      fi
    done
  ) > allsnippets.tmp
  # Nothing is being added to SUBDIRS; nevertheless the existence of this
  # variable is needed to avoid an error from automake:
  #   "AM_GNU_GETTEXT used but SUBDIRS not defined"
  echo "SUBDIRS ="
  echo "TESTS ="
  echo "TESTS_ENVIRONMENT ="
  echo "noinst_PROGRAMS ="
  if ! $for_test; then
    echo "check_PROGRAMS ="
  fi
  echo "noinst_HEADERS ="
  if grep '^pkgdata_DATA *+=' allsnippets.tmp > /dev/null; then
    echo "pkgdata_DATA ="
  fi
  echo "EXTRA_DIST ="
  echo "BUILT_SOURCES ="
  echo "SUFFIXES ="
  echo "MOSTLYCLEANFILES = core *.stackdump"
  echo "MOSTLYCLEANDIRS ="
  echo "CLEANFILES ="
  echo "DISTCLEANFILES ="
  echo "MAINTAINERCLEANFILES ="
  echo
  echo "AM_CPPFLAGS = \\"
  echo "  -I. -I\$(srcdir) \\"
  echo "  -I${testsbase_inverse} -I\$(srcdir)/${testsbase_inverse} \\"
  echo "  -I${testsbase_inverse}/${sourcebase-lib} -I\$(srcdir)/${testsbase_inverse}/${sourcebase-lib}"
  echo
  echo "LDADD = ${testsbase_inverse}/${sourcebase-lib}/${libname}.${libext}"
  echo
  cat allsnippets.tmp
  echo "# Clean up after Solaris cc."
  echo "clean-local:"
  echo "        rm -rf SunWS_cache"
  echo
  echo "mostlyclean-local: mostlyclean-generic"
  echo "        @for dir in '' \$(MOSTLYCLEANDIRS); do \\"
  echo "          if test -n \"\$\$dir\" && test -d \$\$dir; then \\"
  echo "            echo \"rmdir \$\$dir\"; rmdir \$\$dir; \\"
  echo "          fi; \\"
  echo "        done; \\"
  echo "        :"
  rm -f allsnippets.tmp
}

# func_emit_initmacro_start
# emits the first few statements of the gl_INIT macro to standard output.
# - macro_prefix    prefix of gl_EARLY, gl_INIT macros to use
func_emit_initmacro_start ()
{
  # Overriding AC_LIBOBJ and AC_REPLACE_FUNCS has the effect of storing
  # platform-dependent object files in ${macro_prefix}_LIBOBJS instead of
  # LIBOBJS.  The purpose is to allow several gnulib instantiations under
  # a single configure.ac file.  (AC_CONFIG_LIBOBJ_DIR does not allow this
  # flexibility.)
  # Furthermore it avoids an automake error like this when a Makefile.am
  # that uses pieces of gnulib also uses $(LIBOBJ):
  #   automatically discovered file `error.c' should not be explicitly mentioned
  echo "  m4_pushdef([AC_LIBOBJ], m4_defn([${macro_prefix}_LIBOBJ]))"
  echo "  m4_pushdef([AC_REPLACE_FUNCS], m4_defn([${macro_prefix}_REPLACE_FUNCS]))"
  # Overriding AC_LIBSOURCES has the same purpose of avoiding the automake
  # error when a Makefile.am that uses pieces of gnulib also uses $(LIBOBJ):
  #   automatically discovered file `error.c' should not be explicitly mentioned
  # We let automake know about the files to be distributed through the
  # EXTRA_lib_SOURCES variable.
  echo "  m4_pushdef([AC_LIBSOURCES], m4_defn([${macro_prefix}_LIBSOURCES]))"
}

# func_emit_initmacro_end
# emits the last few statements of the gl_INIT macro to standard output.
# - macro_prefix    prefix of gl_EARLY, gl_INIT macros to use
func_emit_initmacro_end ()
{
  echo "  m4_popdef([AC_LIBSOURCES])"
  echo "  m4_popdef([AC_REPLACE_FUNCS])"
  echo "  m4_popdef([AC_LIBOBJ])"
  echo "  AC_CONFIG_COMMANDS_PRE(["
  echo "    ${macro_prefix}_libobjs="
  echo "    ${macro_prefix}_ltlibobjs="
  echo "    if test -n \"\$${macro_prefix}_LIBOBJS\"; then"
  echo "      # Remove the extension."
  echo "      sed_drop_objext='s/\\.o\$//;s/\\.obj\$//'"
  echo "      for i in \`for i in \$${macro_prefix}_LIBOBJS; do echo \"\$i\"; done | sed \"\$sed_drop_objext\" | sort | uniq\`; do"
  echo "        ${macro_prefix}_libobjs=\"\$${macro_prefix}_libobjs \$i.\$ac_objext\""
  echo "        ${macro_prefix}_ltlibobjs=\"\$${macro_prefix}_ltlibobjs \$i.lo\""
  echo "      done"
  echo "    fi"
  echo "    AC_SUBST([${macro_prefix}_LIBOBJS], [\$${macro_prefix}_libobjs])"
  echo "    AC_SUBST([${macro_prefix}_LTLIBOBJS], [\$${macro_prefix}_ltlibobjs])"
  echo "  ])"
}

# func_emit_initmacro_done
# emits a few statements after the gl_INIT macro to standard output.
# - macro_prefix    prefix of gl_EARLY, gl_INIT macros to use
# - sourcebase      directory relative to destdir where to place source code
func_emit_initmacro_done ()
{
  echo
  echo "# Like AC_LIBOBJ, except that the module name goes"
  echo "# into ${macro_prefix}_LIBOBJS instead of into LIBOBJS."
  echo "AC_DEFUN([${macro_prefix}_LIBOBJ], ["
  echo "  AS_LITERAL_IF([\$1], [${macro_prefix}_LIBSOURCES([\$1.c])])dnl"
  echo "  ${macro_prefix}_LIBOBJS=\"\$${macro_prefix}_LIBOBJS \$1.\$ac_objext\""
  echo "])"
  echo
  echo "# Like AC_REPLACE_FUNCS, except that the module name goes"
  echo "# into ${macro_prefix}_LIBOBJS instead of into LIBOBJS."
  echo "AC_DEFUN([${macro_prefix}_REPLACE_FUNCS], ["
  echo "  m4_foreach_w([gl_NAME], [\$1], [AC_LIBSOURCES(gl_NAME[.c])])dnl"
  echo "  AC_CHECK_FUNCS([\$1], , [${macro_prefix}_LIBOBJ(\$ac_func)])"
  echo "])"
  echo
  echo "# Like AC_LIBSOURCES, except the directory where the source file is"
  echo "# expected is derived from the gnulib-tool parametrization,"
  echo "# and alloca is special cased (for the alloca-opt module)."
  echo "# We could also entirely rely on EXTRA_lib..._SOURCES."
  echo "AC_DEFUN([${macro_prefix}_LIBSOURCES], ["
  echo "  m4_foreach([_gl_NAME], [\$1], ["
  echo "    m4_if(_gl_NAME, [alloca.c], [], ["
  echo "      m4_syscmd([test -r $sourcebase/]_gl_NAME[ || test ! -d $sourcebase])dnl"
  echo "      m4_if(m4_sysval, [0], [],"
  echo "        [AC_FATAL([missing $sourcebase/]_gl_NAME)])"
  echo "    ])"
  echo "  ])"
  echo "])"
}

# func_import modules
# Uses also the variables
# - destdir         target directory
# - local_gnulib_dir  from --local-dir
# - verbose         integer, default 0, inc/decremented by --verbose/--quiet
# - libname         library name
# - sourcebase      directory relative to destdir where to place source code
# - m4base          directory relative to destdir where to place *.m4 macros
# - pobase          directory relative to destdir where to place *.po files
# - docbase         directory relative to destdir where to place doc files
# - testsbase       directory relative to destdir where to place unit test code
# - auxdir          directory relative to destdir where to place build aux files
# - inctests        true if --with-tests was given, blank otherwise
# - avoidlist       list of modules to avoid, from --avoid
# - lgpl            yes or a number if library's license shall be LGPL,
#                   blank otherwise
# - makefile_name   from --makefile-name
# - libtool         true if --libtool was given, false if --no-libtool was
#                   given, blank otherwise
# - guessed_libtool true if the configure.ac file uses libtool, false otherwise
# - macro_prefix    prefix of gl_EARLY, gl_INIT macros to use
# - po_domain       prefix of i18n domain to use (without -gnulib suffix)
# - autoconf_minversion  minimum supported autoconf version
# - doit            : if actions shall be executed, false if only to be printed
# - symbolic        true if files should be symlinked, copied otherwise
# - lsymbolic       true if files from local_gnulib_dir should be symlinked,
#                   copied otherwise
# - do_copyrights   true if copyright notices in files should be replaced,
#                   blank otherwise
func_import ()
{
  # Get the cached settings.
  cached_local_gnulib_dir=
  cached_specified_modules=
  cached_avoidlist=
  cached_sourcebase=
  cached_m4base=
  cached_pobase=
  cached_docbase=
  cached_testsbase=
  cached_inctests=
  cached_libname=
  cached_lgpl=
  cached_makefile_name=
  cached_libtool=
  cached_macro_prefix=
  cached_po_domain=
  cached_files=
  if test -f "$destdir"/$m4base/gnulib-cache.m4; then
    cached_libtool=false
    my_sed_traces='
      s,#.*$,,
      s,^dnl .*$,,
      s, dnl .*$,,
      /gl_LOCAL_DIR(/ {
        s,^.*gl_LOCAL_DIR([[ ]*\([^])]*\).*$,cached_local_gnulib_dir="\1",p
      }
      /gl_MODULES(/ {
        s,^.*gl_MODULES([[ ]*\([^])]*\).*$,cached_specified_modules="\1",p
      }
      /gl_AVOID(/ {
        s,^.*gl_AVOID([[ ]*\([^])]*\).*$,cached_avoidlist="\1",p
      }
      /gl_SOURCE_BASE(/ {
        s,^.*gl_SOURCE_BASE([[ ]*\([^])]*\).*$,cached_sourcebase="\1",p
      }
      /gl_M4_BASE(/ {
        s,^.*gl_M4_BASE([[ ]*\([^])]*\).*$,cached_m4base="\1",p
      }
      /gl_PO_BASE(/ {
        s,^.*gl_PO_BASE([[ ]*\([^])]*\).*$,cached_pobase="\1",p
      }
      /gl_DOC_BASE(/ {
        s,^.*gl_DOC_BASE([[ ]*\([^])]*\).*$,cached_docbase="\1",p
      }
      /gl_TESTS_BASE(/ {
        s,^.*gl_TESTS_BASE([[ ]*\([^])]*\).*$,cached_testsbase="\1",p
      }
      /gl_WITH_TESTS/ {
        s,^.*$,cached_inctests=true,p
      }
      /gl_LIB(/ {
        s,^.*gl_LIB([[ ]*\([^])]*\).*$,cached_libname="\1",p
      }
      /gl_LGPL(/ {
        s,^.*gl_LGPL([[ ]*\([^])]*\).*$,cached_lgpl="\1",p
      }
      /gl_LGPL/ {
        s,^.*$,cached_lgpl=yes,p
      }
      /gl_MAKEFILE_NAME(/ {
        s,^.*gl_MAKEFILE_NAME([[ ]*\([^])]*\).*$,cached_makefile_name="\1",p
      }
      /gl_LIBTOOL/ {
        s,^.*$,cached_libtool=true,p
      }
      /gl_MACRO_PREFIX(/ {
        s,^.*gl_MACRO_PREFIX([[ ]*\([^])]*\).*$,cached_macro_prefix="\1",p
      }
      /gl_PO_DOMAIN(/ {
        s,^.*gl_PO_DOMAIN([[ ]*\([^])]*\).*$,cached_po_domain="\1",p
      }'
    eval `sed -n -e "$my_sed_traces" < "$destdir"/$m4base/gnulib-cache.m4`
    if test -f "$destdir"/$m4base/gnulib-comp.m4; then
      my_sed_traces='
        s,#.*$,,
        s,^dnl .*$,,
        s, dnl .*$,,
        /AC_DEFUN(\['"${cached_macro_prefix}"'_FILE_LIST\], \[/ {
          s,^.*$,cached_files=",p
          n
          ta
          :a
          s,^\]).*$,",
          tb
          p
          n
          ba
          :b
          p
        }'
      eval `sed -n -e "$my_sed_traces" < "$destdir"/$m4base/gnulib-comp.m4`
    fi
  fi

  # Merge the cached settings with the specified ones.
  # The m4base must be the same as expected from the pathname.
  if test -n "$cached_m4base" && test "$cached_m4base" != "$m4base"; then
    func_fatal_error "$m4base/gnulib-cache.m4 is expected to contain gl_M4_BASE([$m4base])"
  fi
  # The local_gnulib_dir defaults to the cached one. Recall that the cached one
  # is relative to $destdir, whereas the one we use is relative to . or absolute.
  if test -z "$local_gnulib_dir"; then
    if test -n "$cached_local_gnulib_dir"; then
      case "$destdir" in
        /*)
          local_gnulib_dir="$destdir/$cached_local_gnulib_dir" ;;
        *)
          case "$cached_local_gnulib_dir" in
            /*)
              local_gnulib_dir="$destdir/$cached_local_gnulib_dir" ;;
            *)
              func_relconcat "$destdir" "$cached_local_gnulib_dir"
              local_gnulib_dir="$relconcat" ;;
          esac ;;
      esac
    fi
  fi
  # Append the cached and the specified module names. So that
  # "gnulib-tool --import foo" means to add the module foo.
  specified_modules="$cached_specified_modules $1"
  # Append the cached and the specified avoidlist. This is probably better
  # than dropping the cached one when --avoid is specified at least once.
  avoidlist=`for m in $cached_avoidlist $avoidlist; do echo $m; done | LC_ALL=C sort -u`
  avoidlist=`echo $avoidlist`

  # The sourcebase defaults to the cached one.
  if test -z "$sourcebase"; then
    sourcebase="$cached_sourcebase"
    if test -z "$sourcebase"; then
      func_fatal_error "missing --source-base option"
    fi
  fi
  # The pobase defaults to the cached one.
  if test -z "$pobase"; then
    pobase="$cached_pobase"
  fi
  # The docbase defaults to the cached one.
  if test -z "$docbase"; then
    docbase="$cached_docbase"
    if test -z "$docbase"; then
      func_fatal_error "missing --doc-base option. --doc-base has been introduced on 2006-07-11; if your last invocation of 'gnulib-tool --import' is before that date, you need to run 'gnulib-tool --import' once, with a --doc-base option."
    fi
  fi
  # The testsbase defaults to the cached one.
  if test -z "$testsbase"; then
    testsbase="$cached_testsbase"
    if test -z "$testsbase"; then
      func_fatal_error "missing --tests-base option"
    fi
  fi
  # Require the tests if specified either way.
  if test -z "$inctests"; then
    inctests="$cached_inctests"
  fi
  # The libname defaults to the cached one.
  if test -z "$supplied_libname"; then
    libname="$cached_libname"
    if test -z "$libname"; then
      func_fatal_error "missing --lib option"
    fi
  fi
  # Require LGPL if specified either way.
  if test -z "$lgpl"; then
    lgpl="$cached_lgpl"
  fi
  # The makefile_name defaults to the cached one.
  if test -z "$makefile_name"; then
    makefile_name="$cached_makefile_name"
  fi
  # Use libtool if specified either way, or if guessed.
  if test -z "$libtool"; then
    if test -n "$cached_m4base"; then
      libtool="$cached_libtool"
    else
      libtool="$guessed_libtool"
    fi
  fi
  # The macro_prefix defaults to the cached one.
  if test -z "$macro_prefix"; then
    macro_prefix="$cached_macro_prefix"
    if test -z "$macro_prefix"; then
      func_fatal_error "missing --macro-prefix option"
    fi
  fi
  # The po_domain defaults to the cached one.
  if test -z "$po_domain"; then
    po_domain="$cached_po_domain"
  fi

  # Canonicalize the list of specified modules.
  specified_modules=`for m in $specified_modules; do echo $m; done | LC_ALL=C sort -u`

  # Determine final module list.
  modules="$specified_modules"
  func_modules_transitive_closure
  if test $verbose -ge 0; then
    echo "Module list with included dependencies:"
    echo "$modules" | sed -e 's/^/  /'
  fi

  # Add the dummy module if needed.
  func_modules_add_dummy

  # If --lgpl, verify that the licenses of modules are compatible.
  if test -n "$lgpl"; then
    for module in $modules; do
      license=`func_get_license $module`
      case $license in
        'GPLed build tool') ;;
        'public domain' | 'unlimited' | 'unmodifiable license text') ;;
        *)
          case "$lgpl" in
            yes | 3)
              case $license in
                LGPL | LGPLv2+) ;;
                *) func_fatal_error "incompatible license on module $module: $license" ;;
              esac
              ;;
            2)
              case $license in
                LGPLv2+) ;;
                *) func_fatal_error "incompatible license on module $module: $license" ;;
              esac
              ;;
            *) func_fatal_error "invalid value lgpl=$lgpl" ;;
          esac
          ;;
      esac
    done
  fi

  # Show banner notice of every module.
  func_modules_notice

  # Determine script to apply to imported library files.
  sed_transform_lib_file=
  for module in $modules; do
    if test $module = config-h; then
      # Assume config.h exists, and that -DHAVE_CONFIG_H is omitted.
      sed_transform_lib_file=$sed_transform_lib_file'
        s/^#ifdef[       ]*HAVE_CONFIG_H[        ]*$/#if 1/
      '
      break
    fi
  done
  if test -n "$do_copyrights"; then
    if test -n "$lgpl"; then
      # Update license.
      case "$lgpl" in
        yes | 3)
          sed_transform_lib_file=$sed_transform_lib_file'
            s/GNU General/GNU Lesser General/g
          '
          ;;
        2)
          sed_transform_lib_file=$sed_transform_lib_file'
            s/GNU General/GNU Lesser General/g
            s/version [23]\([ ,]\)/version 2.1\1/g
          '
          ;;
        *) func_fatal_error "invalid value lgpl=$lgpl" ;;
      esac
    else
      # Update license.
      sed_transform_lib_file=$sed_transform_lib_file'
        s/GNU Lesser General/GNU General/g
        s/GNU Library General/GNU General/g
        s/version \(2\|2\.1\)\([ ,]\)/version 3\2/g
      '
    fi
  fi

  # Determine final file list.
  func_modules_to_filelist
  if test $verbose -ge 0; then
    echo "File list:"
    echo "$files" | sed -e 's/^/  /'
  fi

  test -n "$files" \
    || func_fatal_error "refusing to do nothing"

  # Add m4/gnulib-tool.m4 to the file list. It is not part of any module.
  new_files="$files m4/gnulib-tool.m4"
  old_files="$cached_files"
  if test -f "$destdir"/$m4base/gnulib-tool.m4; then
    func_append old_files " m4/gnulib-tool.m4"
  fi

  sed_rewrite_old_files="\
    s,^build-aux/,$auxdir/,
    s,^doc/,$cached_docbase/,
    s,^lib/,$cached_sourcebase/,
    s,^m4/,$cached_m4base/,
    s,^tests/,$cached_testsbase/,"
  sed_rewrite_new_files="\
    s,^build-aux/,$auxdir/,
    s,^doc/,$docbase/,
    s,^lib/,$sourcebase/,
    s,^m4/,$m4base/,
    s,^tests/,$testsbase/,"

  # Create directories.
  { echo "$sourcebase"
    echo "$m4base"
    if test -n "$pobase"; then
      echo "$pobase"
    fi
    docfiles=`echo "$files" | sed -n -e 's,^doc/,,p'`
    if test -n "$docfiles"; then
      echo "$docbase"
    fi
    if test -n "$inctests"; then
      echo "$testsbase"
    fi
    echo "$auxdir"
    for f in $files; do echo $f; done \
      | sed -e "$sed_rewrite_new_files" \
      | sed -n -e 's,^\(.*\)/[^/]*,\1,p' \
      | LC_ALL=C sort -u
  } > "$tmp"/dirs
  { # Rearrange file descriptors. Needed because "while ... done < ..."
    # constructs are executed in a subshell e.g. by Solaris 10 /bin/sh.
    exec 5<&0 < "$tmp"/dirs
    while read d; do
      if test ! -d "$destdir/$d"; then
        if $doit; then
          echo "Creating directory $destdir/$d"
          mkdir -p "$destdir/$d" || func_fatal_error "failed"
        else
          echo "Create directory $destdir/$d"
        fi
      fi
    done
    exec 0<&5 5<&-
  }

  # func_dest_tmpfilename file
  # determines the name of a temporary file (file is relative to destdir).
  # Sets variable:
  #   - tmpfile       absolute filename of the temporary file
  func_dest_tmpfilename ()
  {
    if $doit; then
      # Put the new contents of $file in a file in the same directory (needed
      # to guarantee that an 'mv' to "$destdir/$file" works).
      tmpfile="$destdir/$1.tmp"
    else
      # Put the new contents of $file in a file in a temporary directory
      # (because the directory of "$file" might not exist).
      tmpfile="$tmp"/`basename "$1"`.tmp
    fi
  }

  # Copy files or make symbolic links. Remove obsolete files.
  added_files=''
  removed_files=''
  delimiter='   '
  # Construct a table with 2 columns: rewritten-file-name original-file-name,
  # representing the files according to the last gnulib-tool invocation.
  for f in $old_files; do echo $f; done \
    | sed -e "s,^.*\$,&$delimiter&," -e "$sed_rewrite_old_files" \
    | LC_ALL=C sort \
    > "$tmp"/old-files
  # Construct a table with 2 columns: rewritten-file-name original-file-name,
  # representing the files after this gnulib-tool invocation.
  for f in $new_files; do echo $f; done \
    | sed -e "s,^.*\$,&$delimiter&," -e "$sed_rewrite_new_files" \
    | LC_ALL=C sort \
    > "$tmp"/new-files
  # First the files that are in old-files, but not in new-files:
  sed_take_first_column='s,'"$delimiter"'.*,,'
  for g in `LC_ALL=C join -t"$delimiter" -v1 "$tmp"/old-files "$tmp"/new-files | sed -e "$sed_take_first_column"`; do
    # Remove the file. Do nothing if the user already removed it.
    if test -f "$destdir/$g" || test -h "$destdir/$g"; then
      if $doit; then
        echo "Removing file $g (backup in ${g}~)"
        mv -f "$destdir/$g" "$destdir/${g}~" || func_fatal_error "failed"
      else
        echo "Remove file $g (backup in ${g}~)"
      fi
      func_append removed_files "$g$nl"
    fi
  done
  # func_add_or_update handles a file that ought to be present afterwards.
  # Uses parameters
  # - f             the original file name
  # - g             the rewritten file name
  # - already_present  nonempty if the file already exists, empty otherwise
  func_add_or_update ()
  {
    func_dest_tmpfilename "$g"
    func_lookup_file "$f"
    cp "$lookedup_file" "$tmpfile" || func_fatal_error "failed"
    if test -n "$sed_transform_lib_file"; then
      case "$f" in
        lib/*)
          sed -e "$sed_transform_lib_file" \
            < "$lookedup_file" > "$tmpfile" || func_fatal_error "failed"
          ;;
      esac
    fi
    if test -f "$destdir/$g"; then
      # The file already exists.
      if cmp "$destdir/$g" "$tmpfile" > /dev/null; then
        : # The file has not changed.
      else
        # Replace the file.
        if $doit; then
          if test -n "$already_present"; then
            echo "Updating file $g (backup in ${g}~)"
          else
            echo "Replacing file $g (non-gnulib code backuped in ${g}~) !!"
          fi
          mv -f "$destdir/$g" "$destdir/${g}~" || func_fatal_error "failed"
          if { test -n "$symbolic" \
               || { test -n "$lsymbolic" \
                    && test "$lookedup_file" = "$local_gnulib_dir/$f"; }; } \
             && test -z "$lookedup_tmp" \
             && cmp "$lookedup_file" "$tmpfile" > /dev/null; then
            func_ln_if_changed "$lookedup_file" "$destdir/$g"
          else
            mv -f "$tmpfile" "$destdir/${g}" || func_fatal_error "failed"
          fi
        else
          if test -n "$already_present"; then
            echo "Update file $g (backup in ${g}~)"
          else
            echo "Replace file $g (non-gnulib code backuped in ${g}~) !!"
          fi
        fi
      fi
    else
      # Install the file.
      # Don't protest if the file should be there but isn't: it happens
      # frequently that developers don't put autogenerated files into CVS.
      if $doit; then
        echo "Copying file $g"
        if { test -n "$symbolic" \
             || { test -n "$lsymbolic" \
                  && test "$lookedup_file" = "$local_gnulib_dir/$f"; }; } \
           && test -z "$lookedup_tmp" \
           && cmp "$lookedup_file" "$tmpfile" > /dev/null; then
          func_ln_if_changed "$lookedup_file" "$destdir/$g"
        else
          mv -f "$tmpfile" "$destdir/${g}" || func_fatal_error "failed"
        fi
      else
        echo "Copy file $g"
      fi
      func_append added_files "$g$nl"
    fi
    rm -f "$tmpfile"
  }
  # Then the files that are in new-files, but not in old-files:
  sed_take_last_column='s,^.*'"$delimiter"',,'
  already_present=
  LC_ALL=C join -t"$delimiter" -v2 "$tmp"/old-files "$tmp"/new-files \
    | sed -e "$sed_take_last_column" \
    | sed -e "s,^.*\$,&$delimiter&," -e "$sed_rewrite_new_files" > "$tmp"/added-files
  { # Rearrange file descriptors. Needed because "while ... done < ..."
    # constructs are executed in a subshell e.g. by Solaris 10 /bin/sh.
    exec 5<&0 < "$tmp"/added-files
    while read g f; do
      func_add_or_update
    done
    exec 0<&5 5<&-
  }
  # Then the files that are in new-files and in old-files:
  already_present=true
  LC_ALL=C join -t"$delimiter" "$tmp"/old-files "$tmp"/new-files \
    | sed -e "$sed_take_last_column" \
    | sed -e "s,^.*\$,&$delimiter&," -e "$sed_rewrite_new_files" > "$tmp"/kept-files
  { # Rearrange file descriptors. Needed because "while ... done < ..."
    # constructs are executed in a subshell e.g. by Solaris 10 /bin/sh.
    exec 5<&0 < "$tmp"/kept-files
    while read g f; do
      func_add_or_update
    done
    exec 0<&5 5<&-
  }

  # Command-line invocation printed in a comment in generated gnulib-cache.m4.
  actioncmd="gnulib-tool --import"
  func_append actioncmd " --dir=$destdir"
  if test -n "$local_gnulib_dir"; then
    func_append actioncmd " --local-dir=$local_gnulib_dir"
  fi
  func_append actioncmd " --lib=$libname"
  func_append actioncmd " --source-base=$sourcebase"
  func_append actioncmd " --m4-base=$m4base"
  if test -n "$pobase"; then
    func_append actioncmd " --po-base=$pobase"
  fi
  func_append actioncmd " --doc-base=$docbase"
  func_append actioncmd " --aux-dir=$auxdir"
  if test -n "$inctests"; then
    func_append actioncmd " --with-tests"
  fi
  for module in $avoidlist; do
    func_append actioncmd " --avoid=$module"
  done
  if test -n "$lgpl"; then
    if test "$lgpl" = yes; then
      func_append actioncmd " --lgpl"
    else
      func_append actioncmd " --lgpl=$lgpl"
    fi
  fi
  if test -n "$makefile_name"; then
    func_append actioncmd " --makefile-name=$makefile_name"
  fi
  if test "$libtool" = true; then
    func_append actioncmd " --libtool"
  else
    func_append actioncmd " --no-libtool"
  fi
  func_append actioncmd " --macro-prefix=$macro_prefix"
  if test -n "$po_domain"; then
    func_append actioncmd " --po-domain=$po_domain"
  fi
  func_append actioncmd " `echo $specified_modules`"

  # Default the makefile name to Makefile.am.
  if test -n "$makefile_name"; then
    makefile_am=$makefile_name
  else
    makefile_am=Makefile.am
  fi

  # Create normal Makefile.ams.
  for_test=false

  # Create library makefile.
  func_dest_tmpfilename $sourcebase/$makefile_am
  func_emit_lib_Makefile_am > "$tmpfile"
  if test -f "$destdir"/$sourcebase/$makefile_am; then
    if cmp "$destdir"/$sourcebase/$makefile_am "$tmpfile" > /dev/null; then
      rm -f "$tmpfile"
    else
      if $doit; then
        echo "Updating $sourcebase/$makefile_am (backup in $sourcebase/$makefile_am~)"
        mv -f "$destdir"/$sourcebase/$makefile_am "$destdir"/$sourcebase/$makefile_am~
        mv -f "$tmpfile" "$destdir"/$sourcebase/$makefile_am
      else
        echo "Update $sourcebase/$makefile_am (backup in $sourcebase/$makefile_am~)"
        rm -f "$tmpfile"
      fi
    fi
  else
    if $doit; then
      echo "Creating $sourcebase/$makefile_am"
      mv -f "$tmpfile" "$destdir"/$sourcebase/$makefile_am
    else
      echo "Create $sourcebase/$makefile_am"
      rm -f "$tmpfile"
    fi
    func_append added_files "$sourcebase/$makefile_am$nl"
  fi

  # Create po/ directory.
  if test -n "$pobase"; then
    # Create po makefile and auxiliary files.
    for file in Makefile.in.in remove-potcdate.sin; do
      func_dest_tmpfilename $pobase/$file
      func_lookup_file build-aux/po/$file
      cat "$lookedup_file" > "$tmpfile"
      if test -f "$destdir"/$pobase/$file; then
        if cmp "$destdir"/$pobase/$file "$tmpfile" > /dev/null; then
          rm -f "$tmpfile"
        else
          if $doit; then
            echo "Updating $pobase/$file (backup in $pobase/$file~)"
            mv -f "$destdir"/$pobase/$file "$destdir"/$pobase/$file~
            mv -f "$tmpfile" "$destdir"/$pobase/$file
          else
            echo "Update $pobase/$file (backup in $pobase/$file~)"
            rm -f "$tmpfile"
          fi
        fi
      else
        if $doit; then
          echo "Creating $pobase/$file"
          mv -f "$tmpfile" "$destdir"/$pobase/$file
        else
          echo "Create $pobase/$file"
          rm -f "$tmpfile"
        fi
        func_append added_files "$pobase/$file$nl"
      fi
    done
    # Create po makefile parametrization, part 1.
    func_dest_tmpfilename $pobase/Makevars
    func_emit_po_Makevars > "$tmpfile"
    if test -f "$destdir"/$pobase/Makevars; then
      if cmp "$destdir"/$pobase/Makevars "$tmpfile" > /dev/null; then
        rm -f "$tmpfile"
      else
        if $doit; then
          echo "Updating $pobase/Makevars (backup in $pobase/Makevars~)"
          mv -f "$destdir"/$pobase/Makevars "$destdir"/$pobase/Makevars~
          mv -f "$tmpfile" "$destdir"/$pobase/Makevars
        else
          echo "Update $pobase/Makevars (backup in $pobase/Makevars~)"
          rm -f "$tmpfile"
        fi
      fi
    else
      if $doit; then
        echo "Creating $pobase/Makevars"
        mv -f "$tmpfile" "$destdir"/$pobase/Makevars
      else
        echo "Create $pobase/Makevars"
        rm -f "$tmpfile"
      fi
      func_append added_files "$pobase/Makevars$nl"
    fi
    # Create po makefile parametrization, part 2.
    func_dest_tmpfilename $pobase/POTFILES.in
    func_emit_po_POTFILES_in > "$tmpfile"
    if test -f "$destdir"/$pobase/POTFILES.in; then
      if cmp "$destdir"/$pobase/POTFILES.in "$tmpfile" > /dev/null; then
        rm -f "$tmpfile"
      else
        if $doit; then
          echo "Updating $pobase/POTFILES.in (backup in $pobase/POTFILES.in~)"
          mv -f "$destdir"/$pobase/POTFILES.in "$destdir"/$pobase/POTFILES.in~
          mv -f "$tmpfile" "$destdir"/$pobase/POTFILES.in
        else
          echo "Update $pobase/POTFILES.in (backup in $pobase/POTFILES.in~)"
          rm -f "$tmpfile"
        fi
      fi
    else
      if $doit; then
        echo "Creating $pobase/POTFILES.in"
        mv -f "$tmpfile" "$destdir"/$pobase/POTFILES.in
      else
        echo "Create $pobase/POTFILES.in"
        rm -f "$tmpfile"
      fi
      func_append added_files "$pobase/POTFILES.in$nl"
    fi
    # Fetch PO files.
    TP_URL="http://translationproject.org/latest/"
    TP_RSYNC_URI="translationproject.org::tp/latest/"
    if $doit; then
      echo "Fetching gnulib PO files from $TP_URL"
      (cd "$destdir"/$pobase \
       && { # Prefer rsync over wget if it is available, since it consumes
            # less network bandwidth, due to compression.
            if type rsync 2>/dev/null | grep / > /dev/null; then
              rsync -Lrtz "${TP_RSYNC_URI}gnulib/" .
            else
              wget --quiet -r -l1 -nd -np -A.po "${TP_URL}gnulib"
            fi
          }
      )
    else
      echo "Fetch gnulib PO files from $TP_URL"
    fi
    # Create po/LINGUAS.
    if $doit; then
      func_dest_tmpfilename $pobase/LINGUAS
      (cd "$destdir"/$pobase \
       && { echo '# Set of available languages.'
            LC_ALL=C ls -1 *.po | sed -e 's,\.po$,,'
          }
      ) > "$tmpfile"
      if test -f "$destdir"/$pobase/LINGUAS; then
        if cmp "$destdir"/$pobase/LINGUAS "$tmpfile" > /dev/null; then
          rm -f "$tmpfile"
        else
          echo "Updating $pobase/LINGUAS (backup in $pobase/LINGUAS~)"
          mv -f "$destdir"/$pobase/LINGUAS "$destdir"/$pobase/LINGUAS~
          mv -f "$tmpfile" "$destdir"/$pobase/LINGUAS
        fi
      else
        echo "Creating $pobase/LINGUAS"
        mv -f "$tmpfile" "$destdir"/$pobase/LINGUAS
        func_append added_files "$pobase/LINGUAS$nl"
      fi
    else
      if test -f "$destdir"/$pobase/LINGUAS; then
        echo "Update $pobase/LINGUAS (backup in $pobase/LINGUAS~)"
      else
        echo "Create $pobase/LINGUAS"
      fi
    fi
  fi

  # Create m4/gnulib-cache.m4.
  func_dest_tmpfilename $m4base/gnulib-cache.m4
  (
    func_emit_copyright_notice
    echo "#"
    echo "# This file represents the specification of how gnulib-tool is used."
    echo "# It acts as a cache: It is written and read by gnulib-tool."
    echo "# In projects using CVS, this file is meant to be stored in CVS,"
    echo "# like the configure.ac and various Makefile.am files."
    echo
    echo
    echo "# Specification in the form of a command-line invocation:"
    echo "#   $actioncmd"
    echo
    echo "# Specification in the form of a few gnulib-tool.m4 macro invocations:"
    # Store the local_gnulib_dir relative to destdir.
    case "$local_gnulib_dir" in
      "" | /*)
        relative_local_gnulib_dir="$local_gnulib_dir" ;;
      * )
        case "$destdir" in
          /*) relative_local_gnulib_dir="$local_gnulib_dir" ;;
          *)
            # destdir, local_gnulib_dir are both relative.
            func_relativize "$destdir" "$local_gnulib_dir"
            relative_local_gnulib_dir="$reldir" ;;
        esac ;;
    esac
    echo "gl_LOCAL_DIR([$relative_local_gnulib_dir])"
    echo "gl_MODULES(["`echo $specified_modules`"])"
    echo "gl_AVOID([$avoidlist])"
    echo "gl_SOURCE_BASE([$sourcebase])"
    echo "gl_M4_BASE([$m4base])"
    echo "gl_PO_BASE([$pobase])"
    echo "gl_DOC_BASE([$docbase])"
    echo "gl_TESTS_BASE([$testsbase])"
    test -z "$inctests" || echo "gl_WITH_TESTS"
    echo "gl_LIB([$libname])"
    if test -n "$lgpl"; then
      if test "$lgpl" = yes; then
        echo "gl_LGPL"
      else
        echo "gl_LGPL([$lgpl])"
      fi
    fi
    echo "gl_MAKEFILE_NAME([$makefile_name])"
    if test "$libtool" = true; then
      echo "gl_LIBTOOL"
    fi
    echo "gl_MACRO_PREFIX([$macro_prefix])"
    echo "gl_PO_DOMAIN([$po_domain])"
  ) > "$tmpfile"
  if test -f "$destdir"/$m4base/gnulib-cache.m4; then
    if cmp "$destdir"/$m4base/gnulib-cache.m4 "$tmpfile" > /dev/null; then
      rm -f "$tmpfile"
    else
      if $doit; then
        echo "Updating $m4base/gnulib-cache.m4 (backup in $m4base/gnulib-cache.m4~)"
        mv -f "$destdir"/$m4base/gnulib-cache.m4 "$destdir"/$m4base/gnulib-cache.m4~
        mv -f "$tmpfile" "$destdir"/$m4base/gnulib-cache.m4
      else
        echo "Update $m4base/gnulib-cache.m4 (backup in $m4base/gnulib-cache.m4~)"
        if false; then
          cat "$tmpfile"
          echo
          echo "# gnulib-cache.m4 ends here"
        fi
        rm -f "$tmpfile"
      fi
    fi
  else
    if $doit; then
      echo "Creating $m4base/gnulib-cache.m4"
      mv -f "$tmpfile" "$destdir"/$m4base/gnulib-cache.m4
    else
      echo "Create $m4base/gnulib-cache.m4"
      cat "$tmpfile"
      rm -f "$tmpfile"
    fi
  fi

  # Create m4/gnulib-comp.m4.
  func_dest_tmpfilename $m4base/gnulib-comp.m4
  (
    echo "# DO NOT EDIT! GENERATED AUTOMATICALLY!"
    func_emit_copyright_notice
    echo "#"
    echo "# This file represents the compiled summary of the specification in"
    echo "# gnulib-cache.m4. It lists the computed macro invocations that need"
    echo "# to be invoked from configure.ac."
    echo "# In projects using CVS, this file can be treated like other built files."
    echo
    echo
    echo "# This macro should be invoked from $configure_ac, in the section"
    echo "# \"Checks for programs\", right after AC_PROG_CC, and certainly before"
    echo "# any checks for libraries, header files, types and library functions."
    echo "AC_DEFUN([${macro_prefix}_EARLY],"
    echo "["
    echo "  m4_pattern_forbid([^gl_[A-Z]])dnl the gnulib macro namespace"
    echo "  m4_pattern_allow([^gl_ES\$])dnl a valid locale name"
    echo "  m4_pattern_allow([^gl_LIBOBJS\$])dnl a variable"
    echo "  m4_pattern_allow([^gl_LTLIBOBJS\$])dnl a variable"
    echo "  AC_REQUIRE([AC_PROG_RANLIB])"
    if test -n "$uses_subdirs"; then
      echo "  AC_REQUIRE([AM_PROG_CC_C_O])"
    fi
    if grep AC_GNU_SOURCE "$destdir"/$m4base/*.m4 >/dev/null 2>/dev/null; then
      echo "  AC_REQUIRE([AC_GNU_SOURCE])"
    fi
    for module in $modules; do
      func_verify_module
      if test -n "$module"; then
        func_get_autoconf_early_snippet "$module"
      fi
    done \
      | sed -e '/^$/d;' -e 's/^/  /'
    echo "])"
    echo
    echo "# This macro should be invoked from $configure_ac, in the section"
    echo "# \"Check for header files, types and library functions\"."
    echo "AC_DEFUN([${macro_prefix}_INIT],"
    echo "["
    func_emit_initmacro_start
    if test "$libtool" = true; then
      echo "  AM_CONDITIONAL([GL_COND_LIBTOOL], [true])"
      echo "  gl_cond_libtool=true"
    else
      echo "  AM_CONDITIONAL([GL_COND_LIBTOOL], [false])"
      echo "  gl_cond_libtool=false"
      echo "  gl_libdeps="
      echo "  gl_ltlibdeps="
    fi
    echo "  gl_source_base='$sourcebase'"
    if test "$auxdir" != "build-aux"; then
      sed_replace_build_aux='
        :a
        /AC_CONFIG_FILES(.*:build-aux\/.*)/{
          s|AC_CONFIG_FILES(\(.*\):build-aux/\(.*\))|AC_CONFIG_FILES(\1:'"$auxdir"'/\2)|
          ba
        }'
    else
      sed_replace_build_aux=
    fi
    for module in $modules; do
      func_verify_module
      if test -n "$module"; then
        func_get_autoconf_snippet "$module" \
          | sed -e '/^$/d;' -e 's/^/  /' \
                -e 's/AM_GNU_GETTEXT(\[external\])/dnl you must add AM_GNU_GETTEXT([external]) or similar to configure.ac./' \
                -e "$sed_replace_build_aux"
        if test "$module" = 'alloca' && test "$libtool" = true; then
          echo 'changequote(,)dnl'
          echo 'LTALLOCA=`echo "$ALLOCA" | sed '"'"'s/\.[^.]* /.lo /g;s/\.[^.]*$/.lo/'"'"'`'
          echo 'changequote([, ])dnl'
          echo 'AC_SUBST([LTALLOCA])'
        fi
      fi
    done
    # _LIBDEPS and _LTLIBDEPS variables are not needed if this library is
    # created using libtool, because libtool already handles the dependencies.
    if test "$libtool" != true; then
      libname_upper=`echo "$libname" | LC_ALL=C tr 'a-z-' 'A-Z_'`
      echo "  ${libname_upper}_LIBDEPS=\"\$gl_libdeps\""
      echo "  AC_SUBST([${libname_upper}_LIBDEPS])"
      echo "  ${libname_upper}_LTLIBDEPS=\"\$gl_ltlibdeps\""
      echo "  AC_SUBST([${libname_upper}_LTLIBDEPS])"
    fi
    func_emit_initmacro_end
    echo "])"
    func_emit_initmacro_done
    echo
    echo "# This macro records the list of files which have been installed by"
    echo "# gnulib-tool and may be removed by future gnulib-tool invocations."
    echo "AC_DEFUN([${macro_prefix}_FILE_LIST], ["
    echo "$files" | sed -e 's,^,  ,'
    echo "])"
  ) > "$tmpfile"
  if test -f "$destdir"/$m4base/gnulib-comp.m4; then
    if cmp "$destdir"/$m4base/gnulib-comp.m4 "$tmpfile" > /dev/null; then
      rm -f "$tmpfile"
    else
      if $doit; then
        echo "Updating $m4base/gnulib-comp.m4 (backup in $m4base/gnulib-comp.m4~)"
        mv -f "$destdir"/$m4base/gnulib-comp.m4 "$destdir"/$m4base/gnulib-comp.m4~
        mv -f "$tmpfile" "$destdir"/$m4base/gnulib-comp.m4
      else
        echo "Update $m4base/gnulib-comp.m4 (backup in $m4base/gnulib-comp.m4~)"
        if false; then
          cat "$tmpfile"
          echo
          echo "# gnulib-comp.m4 ends here"
        fi
        rm -f "$tmpfile"
      fi
    fi
  else
    if $doit; then
      echo "Creating $m4base/gnulib-comp.m4"
      mv -f "$tmpfile" "$destdir"/$m4base/gnulib-comp.m4
    else
      echo "Create $m4base/gnulib-comp.m4"
      cat "$tmpfile"
      rm -f "$tmpfile"
    fi
  fi

  if test -n "$inctests"; then
    # Create tests makefile.
    func_dest_tmpfilename $testsbase/$makefile_am
    func_emit_tests_Makefile_am > "$tmpfile"
    if test -f "$destdir"/$testsbase/$makefile_am; then
      if cmp "$destdir"/$testsbase/$makefile_am "$tmpfile" > /dev/null; then
        rm -f "$tmpfile"
      else
        if $doit; then
          echo "Updating $testsbase/$makefile_am (backup in $testsbase/$makefile_am~)"
          mv -f "$destdir"/$testsbase/$makefile_am "$destdir"/$testsbase/$makefile_am~
          mv -f "$tmpfile" "$destdir"/$testsbase/$makefile_am
        else
          echo "Update $testsbase/$makefile_am (backup in $testsbase/$makefile_am~)"
          rm -f "$tmpfile"
        fi
      fi
    else
      if $doit; then
        echo "Creating $testsbase/$makefile_am"
        mv -f "$tmpfile" "$destdir"/$testsbase/$makefile_am
      else
        echo "Create $testsbase/$makefile_am"
        rm -f "$tmpfile"
      fi
    func_append added_files "$testsbase/$makefile_am$nl"
    fi
  fi

  # Update the .cvsignore and .gitignore files.
  { echo "$added_files" | sed -e '/^$/d' -e 's,\([^/]*\)$,|A|\1,'
    echo "$removed_files" | sed -e '/^$/d' -e 's,\([^/]*\)$,|R|\1,'
  } | LC_ALL=C sort -t'|' -k1,1 > "$tmp"/fileset-changes
  { # Rearrange file descriptors. Needed because "while ... done < ..."
    # constructs are executed in a subshell e.g. by Solaris 10 /bin/sh.
    exec 5<&0 < "$tmp"/fileset-changes
    func_update_ignorelist ()
    {
      ignore="$1"
      if test -f "$destdir/$dir$ignore"; then
        if test -n "$dir_added" || test -n "$dir_removed"; then
          LC_ALL=C sort "$destdir/$dir$ignore" > "$tmp"/ignore
          echo "$dir_added" | sed -e '/^$/d' | LC_ALL=C sort -u \
            | LC_ALL=C join -v 2 "$tmp"/ignore - > "$tmp"/ignore-added
          echo "$dir_removed" | sed -e '/^$/d' | LC_ALL=C sort -u \
            | LC_ALL=C join -v 2 "$tmp"/ignore - > "$tmp"/ignore-removed
          if test -s "$tmp"/ignore-added || test -s "$tmp"/ignore-removed; then
            if $doit; then
              echo "Updating $destdir/$dir$ignore (backup in $destdir/$dir${ignore}~)"
              mv -f "$destdir/$dir$ignore" "$destdir/$dir$ignore"~
              sed -e 's,^,/^,' -e 's,$,\$/d,' < "$tmp"/ignore-removed > "$tmp"/sed-ignore-removed
              cat "$destdir/$dir$ignore"~ "$tmp"/ignore-added \
                | sed -f "$tmp"/sed-ignore-removed \
                > "$destdir/$dir$ignore"
            else
              echo "Update $destdir/$dir$ignore (backup in $destdir/$dir${ignore}~)"
            fi
          fi
        fi
      else
        if test -n "$dir_added"; then
          if $doit; then
            echo "Creating $destdir/$dir$ignore"
            {
              if test "$ignore" = .cvsignore; then
                echo ".deps"
                # Automake generates Makefile rules that create .dirstamp files.
                echo ".dirstamp"
              fi
              echo "$dir_added" | sed -e '/^$/d' | LC_ALL=C sort -u
            } > "$destdir/$dir$ignore"
          else
            echo "Create $destdir/$dir$ignore"
          fi
        fi
      fi
    }
    func_done_dir ()
    {
      dir="$1"
      dir_added="$2"
      dir_removed="$3"
      if test -d "$destdir/CVS" || test -d "$destdir/${dir}CVS" || test -f "$destdir/${dir}.cvsignore"; then
        func_update_ignorelist .cvsignore
      fi
      if test -d "$destdir/.git" || test -f "$destdir/${dir}.gitignore"; then
        func_update_ignorelist .gitignore
      fi
    }
    last_dir=
    last_dir_added=
    last_dir_removed=
    while read line; do
      # Why not ''read next_dir op file'' ? Because the dir column can be empty.
      next_dir=`echo "$line" | sed -e 's,|.*,,'`
      op=`echo "$line" | sed -e 's,^[^|]*|\([^|]*\)|.*$,\1,'`
      file=`echo "$line" | sed -e 's,^[^|]*|[^|]*|,,'`
      if test "$next_dir" != "$last_dir"; then
        func_done_dir "$last_dir" "$last_dir_added" "$last_dir_removed"
        last_dir="$next_dir"
        last_dir_added=
        last_dir_removed=
      fi
      case $op in
        A) func_append last_dir_added "$file$nl";;
        R) func_append last_dir_removed "$file$nl";;
      esac
    done
    func_done_dir "$last_dir" "$last_dir_added" "$last_dir_removed"
    exec 0<&5 5<&-
  }

  echo "Finished."
  echo
  echo "You may need to add #include directives for the following .h files."
  # Intersect $specified_modules and $modules
  # (since $specified_modules is not necessarily of subset of $modules - some
  # may have been skipped through --avoid, and since the elements of $modules
  # but not in $specified_modules can go away without explicit notice - through
  # changes in the module dependencies).
  echo "$specified_modules" > "$tmp"/modules1 # a sorted list, one module per line
  echo "$modules" > "$tmp"/modules2 # also a sorted list, one module per line
  # First the #include <...> directives without #ifs, sorted for convenience,
  # then the #include "..." directives without #ifs, sorted for convenience,
  # then the #include directives that are surrounded by #ifs. Not sorted.
  for module in `LC_ALL=C join "$tmp"/modules1 "$tmp"/modules2`; do
    include_directive=`func_get_include_directive "$module"`
    case "$nl$include_directive" in
      *"$nl#if"*)
        echo "$include_directive" 1>&5
        ;;
      *)
        echo "$include_directive" | grep -v 'include "' 1>&6
        echo "$include_directive" | grep 'include "' 1>&7
        ;;
    esac
  done 5> "$tmp"/include-if 6> "$tmp"/include-angles 7> "$tmp"/include-quotes
  (
   LC_ALL=C sort -u "$tmp"/include-angles
   LC_ALL=C sort -u "$tmp"/include-quotes
   cat "$tmp"/include-if
  ) | sed -e '/^$/d' -e 's/^/  /'
  rm -f "$tmp"/include-angles "$tmp"/include-quotes "$tmp"/include-if

  for module in $modules; do
    func_get_link_directive "$module"
  done \
    | LC_ALL=C sort -u | sed -e '/^$/d' -e 's/^/  /' > "$tmp"/link
  if test `wc -l < "$tmp"/link` != 0; then
    echo
    echo "You may need to use the following Makefile variables when linking."
    echo "Use them in <program>_LDADD when linking a program, or"
    echo "in <library>_a_LDFLAGS or <library>_la_LDFLAGS when linking a library."
    cat "$tmp"/link
  fi
  rm -f "$tmp"/link

  echo
  echo "Don't forget to"
  if test "$makefile_am" = Makefile.am; then
    echo "  - add \"$sourcebase/Makefile\" to AC_CONFIG_FILES in $configure_ac,"
  else
    echo "  - \"include $makefile_name\" from within \"$sourcebase/Makefile.am\","
  fi
  if test -n "$pobase"; then
    echo "  - add \"$pobase/Makefile.in\" to AC_CONFIG_FILES in $configure_ac,"
  fi
  if test -n "$inctests"; then
    if test "$makefile_am" = Makefile.am; then
      echo "  - add \"$testsbase/Makefile\" to AC_CONFIG_FILES in $configure_ac,"
    else
      echo "  - \"include $makefile_name\" from within \"$testsbase/Makefile.am\","
    fi
  fi
  if test "$makefile_am" = Makefile.am; then
    sourcebase_dir=`echo "$sourcebase" | sed -n -e 's,/[^/]*$,/,p'`
    sourcebase_base=`basename "$sourcebase"`
    echo "  - mention \"${sourcebase_base}\" in SUBDIRS in ${sourcebase_dir}Makefile.am,"
  fi
  if test -n "$pobase"; then
    pobase_dir=`echo "$pobase" | sed -n -e 's,/[^/]*$,/,p'`
    pobase_base=`basename "$pobase"`
    echo "  - mention \"${pobase_base}\" in SUBDIRS in ${pobase_dir}Makefile.am,"
  fi
  if test -n "$inctests"; then
    if test "$makefile_am" = Makefile.am; then
      testsbase_dir=`echo "$testsbase" | sed -n -e 's,/[^/]*$,/,p'`
      testsbase_base=`basename "$testsbase"`
      echo "  - mention \"${testsbase_base}\" in SUBDIRS in ${testsbase_dir}Makefile.am,"
    fi
  fi
  echo "  - mention \"-I ${m4base}\" in ACLOCAL_AMFLAGS in Makefile.am,"
  echo "  - invoke ${macro_prefix}_EARLY in $configure_ac, right after AC_PROG_CC,"
  echo "  - invoke ${macro_prefix}_INIT in $configure_ac."
}

# func_create_testdir testdir modules
# Input:
# - local_gnulib_dir  from --local-dir
# - auxdir          directory relative to destdir where to place build aux files
func_create_testdir ()
{
  testdir="$1"
  modules="$2"
  if test -z "$modules"; then
    # All modules together.
    # Except config-h, which breaks all modules which use HAVE_CONFIG_H.
    # Except fnmatch-posix, which conflicts with fnmatch-gnu. FIXME.
    # Except ftruncate, mountlist, which abort the configuration on mingw. FIXME.
    modules=`func_all_modules`
    modules=`for m in $modules; do case $m in config-h | fnmatch-posix | ftruncate | mountlist) ;; *) echo $m;; esac; done`
  fi
  modules=`for m in $modules; do echo $m; done | LC_ALL=C sort -u`

  # Check that the license of every module is consistent with the license of
  # its dependencies.
  saved_modules="$modules"
  saved_inctests="$inctests"
  # When computing transitive closures, don't consider $module to depend on
  # $module-tests. Need this becauses tests are implicitly GPL and may depend
  # on GPL modules - therefore we don't want a warning in this case.
  inctests=""
  for requested_module in $saved_modules; do
    requested_license=`func_get_license "$requested_module"`
    if test "$requested_license" != GPL; then
      # Here we use func_modules_transitive_closure, not just
      # func_get_dependencies, so that we also detect weird situations like
      # an LGPL module which depends on a GPLed build tool module which depends
      # on a GPL module.
      modules="$requested_module"
      func_modules_transitive_closure
      for module in $modules; do
        license=`func_get_license "$module"`
        case "$license" in
          'GPLed build tool') ;;
          'public domain' | 'unlimited' | 'unmodifiable license text') ;;
          *)
            case "$requested_license" in
              GPLv2+)
                case "$license" in
                  GPLv2+ | LGPLv2+) ;;
                  *) echo "warning: module $requested_module depends on a module with an incompatible license: $module" 1>&2 ;;
                esac
                ;;
              LGPL)
                case "$license" in
                  LGPL | LGPLv2+) ;;
                  *) echo "warning: module $requested_module depends on a module with an incompatible license: $module" 1>&2 ;;
                esac
                ;;
              LGPLv2+)
                case "$license" in
                  LGPLv2+) ;;
                  *) echo "warning: module $requested_module depends on a module with an incompatible license: $module" 1>&2 ;;
                esac
                ;;
            esac
            ;;
        esac
      done
    fi
  done
  modules="$saved_modules"
  inctests="$saved_inctests"

  # Subdirectory names.
  sourcebase=gllib
  m4base=glm4
  pobase=
  docbase=gldoc
  testsbase=gltests
  macro_prefix=gl
  po_domain=

  # Determine final module list.
  func_modules_transitive_closure
  if test $verbose -ge 0; then
    echo "Module list with included dependencies:"
    echo "$modules" | sed -e 's/^/  /'
  fi

  # Add the dummy module if needed.
  func_modules_add_dummy

  # Show banner notice of every module.
  func_modules_notice

  # Determine final file list.
  func_modules_to_filelist
  if test $verbose -ge 0; then
    echo "File list:"
    echo "$files" | sed -e 's/^/  /'
  fi

  sed_rewrite_files="\
    s,^build-aux/,$auxdir/,
    s,^doc/,$docbase/,
    s,^lib/,$sourcebase/,
    s,^m4/,$m4base/,
    s,^tests/,$testsbase/,"

  # Create directories.
  for f in $files; do echo $f; done \
    | sed -e "$sed_rewrite_files" \
    | sed -n -e 's,^\(.*\)/[^/]*,\1,p' \
    | LC_ALL=C sort -u \
    > "$tmp"/dirs
  { # Rearrange file descriptors. Needed because "while ... done < ..."
    # constructs are executed in a subshell e.g. by Solaris 10 /bin/sh.
    exec 5<&0 < "$tmp"/dirs
    while read d; do
      mkdir -p "$testdir/$d"
    done
    exec 0<&5 5<&-
  }

  # Copy files or make symbolic links.
  delimiter='   '
  for f in $files; do echo $f; done \
    | sed -e "s,^.*\$,&$delimiter&," -e "$sed_rewrite_files" \
    | LC_ALL=C sort \
    > "$tmp"/files
  { # Rearrange file descriptors. Needed because "while ... done < ..."
    # constructs are executed in a subshell e.g. by Solaris 10 /bin/sh.
    exec 5<&0 < "$tmp"/files
    while read g f; do
      func_lookup_file "$f"
      if test -n "$lookedup_tmp"; then
        cp -p "$lookedup_file" "$testdir/$g"
      else
        ln "$lookedup_file" "$testdir/$g" 2>/dev/null ||
        if { test -n "$symbolic" \
             || { test -n "$lsymbolic" \
                  && test "$lookedup_file" = "$local_gnulib_dir/$f"; }; }; then
          func_ln "$lookedup_file" "$testdir/$g"
        else
          cp -p "$lookedup_file" "$testdir/$g"
        fi
      fi
    done
    exec 0<&5 5<&-
  }

  # Create Makefile.ams that are for testing.
  for_test=true

  # Create $sourcebase/Makefile.am.
  mkdir -p "$testdir/$sourcebase"
  func_emit_lib_Makefile_am > "$testdir/$sourcebase/Makefile.am"

  # Create $m4base/Makefile.am.
  mkdir -p "$testdir/$m4base"
  (echo "## Process this file with automake to produce Makefile.in."
   echo
   echo "EXTRA_DIST ="
   for f in $files; do
     case "$f" in
       m4/* )
         echo "EXTRA_DIST += "`echo "$f" | sed -e 's,^m4/,,'` ;;
     esac
   done
  ) > "$testdir/$m4base/Makefile.am"

  subdirs="$sourcebase $m4base"
  subdirs_with_configure_ac=""

  if false && test -f "$testdir"/$m4base/gettext.m4; then
    # Avoid stupid error message from automake:
    # "AM_GNU_GETTEXT used but `po' not in SUBDIRS"
    mkdir -p "$testdir/po"
    (echo "## Process this file with automake to produce Makefile.in."
    ) > "$testdir/po/Makefile.am"
    func_append subdirs " po"
  fi

  if test -n "$inctests"; then
    test -d "$testdir/$testsbase" || mkdir "$testdir/$testsbase"
    # Create $testsbase/Makefile.am.
    func_emit_tests_Makefile_am > "$testdir/$testsbase/Makefile.am"
    # Create $testsbase/configure.ac.
    (echo "# Process this file with autoconf to produce a configure script."
     echo "AC_INIT([dummy], [0])"
     echo "AC_CONFIG_AUX_DIR([../$auxdir])"
     echo "AM_INIT_AUTOMAKE"
     echo
     echo "AM_CONFIG_HEADER([config.h])"
     echo
     echo "AC_PROG_CC"
     echo "AC_PROG_INSTALL"
     echo "AC_PROG_MAKE_SET"
     echo "AC_PROG_RANLIB"
     echo
     if grep AC_GNU_SOURCE "$testdir/$m4base"/*.m4 >/dev/null 2>/dev/null; then
       echo "AC_GNU_SOURCE"
       echo
     fi
     for module in $modules; do
       func_verify_module
       if test -n "$module"; then
         func_get_autoconf_early_snippet "$module"
       fi
     done \
       | sed -e '/^$/d;' -e 's/AC_REQUIRE(\[\([^()]*\)\])/\1/'
     if test "$libtool" = true; then
       echo "AM_CONDITIONAL([GL_COND_LIBTOOL], [true])"
       echo "gl_cond_libtool=true"
     else
       echo "AM_CONDITIONAL([GL_COND_LIBTOOL], [false])"
       echo "gl_cond_libtool=false"
       echo "gl_libdeps="
       echo "gl_ltlibdeps="
     fi
     # Wrap the set of autoconf snippets into an autoconf macro that is then
     # invoked. This is needed because autoconf does not support AC_REQUIRE
     # at the top level:
     #   error: AC_REQUIRE(gt_CSHARPCOMP): cannot be used outside of an AC_DEFUN'd macro
     # but we want the AC_REQUIRE to have its normal meaning (provide one
     # expansion of the required macro before the current point, and only one
     # expansion total).
     echo "AC_DEFUN([gl_INIT], ["
     func_emit_initmacro_start
     sed_replace_build_aux='
       :a
       /AC_CONFIG_FILES(.*:build-aux\/.*)/{
         s|AC_CONFIG_FILES(\(.*\):build-aux/\(.*\))|AC_CONFIG_FILES(\1:../'"$auxdir"'/\2)|
         ba
       }'
     # We don't have explicit ordering constraints between the various
     # autoconf snippets. It's cleanest to put those of the library before
     # those of the tests.
     echo "gl_source_base='../$sourcebase'"
     for module in $modules; do
       func_verify_nontests_module
       if test -n "$module"; then
         func_get_autoconf_snippet "$module" \
           | sed -e "$sed_replace_build_aux"
       fi
     done
     echo "gl_source_base='.'"
     for module in $modules; do
       func_verify_tests_module
       if test -n "$module"; then
         func_get_autoconf_snippet "$module" \
           | sed -e "$sed_replace_build_aux"
       fi
     done
     # _LIBDEPS and _LTLIBDEPS variables are not needed if this library is
     # created using libtool, because libtool already handles the dependencies.
     if test "$libtool" != true; then
       libname_upper=`echo "$libname" | LC_ALL=C tr 'a-z-' 'A-Z_'`
       echo "  ${libname_upper}_LIBDEPS=\"\$gl_libdeps\""
       echo "  AC_SUBST([${libname_upper}_LIBDEPS])"
       echo "  ${libname_upper}_LTLIBDEPS=\"\$gl_ltlibdeps\""
       echo "  AC_SUBST([${libname_upper}_LTLIBDEPS])"
     fi
     func_emit_initmacro_end
     echo "])"
     func_emit_initmacro_done
     echo
     echo "gl_INIT"
     echo
     # Usually $testsbase/config.h will be a superset of config.h. Verify this
     # by "merging" config.h into $testsbase/config.h; look out for gcc warnings.
     echo "AH_TOP([#include \"../config.h\"])"
     echo
     echo "AC_OUTPUT([Makefile])"
    ) > "$testdir/$testsbase/configure.ac"
    func_append subdirs " $testsbase"
    subdirs_with_configure_ac="$subdirs_with_configure_ac $testsbase"
  fi

  # Create Makefile.am.
  (echo "## Process this file with automake to produce Makefile.in."
   echo
   echo "AUTOMAKE_OPTIONS = 1.5 foreign"
   echo
   echo "SUBDIRS = $subdirs"
   echo
   echo "ACLOCAL_AMFLAGS = -I $m4base"
  ) > "$testdir/Makefile.am"

  # Create configure.ac.
  (echo "# Process this file with autoconf to produce a configure script."
   echo "AC_INIT([dummy], [0])"
   if test "$auxdir" != "."; then
     echo "AC_CONFIG_AUX_DIR([$auxdir])"
   fi
   echo "AM_INIT_AUTOMAKE"
   echo
   echo "AM_CONFIG_HEADER([config.h])"
   echo
   echo "AC_PROG_CC"
   echo "AC_PROG_INSTALL"
   echo "AC_PROG_MAKE_SET"
   echo
   echo "# For autobuild."
   echo "AC_CANONICAL_BUILD"
   echo "AC_CANONICAL_HOST"
   echo
   echo "m4_pattern_forbid([^gl_[A-Z]])dnl the gnulib macro namespace"
   echo "m4_pattern_allow([^gl_ES\$])dnl a valid locale name"
   echo "m4_pattern_allow([^gl_LIBOBJS\$])dnl a variable"
   echo "m4_pattern_allow([^gl_LTLIBOBJS\$])dnl a variable"
   echo
   echo "AC_PROG_RANLIB"
   echo
   if test -n "$uses_subdirs"; then
     echo "AM_PROG_CC_C_O"
     echo
   fi
   if grep AC_GNU_SOURCE "$testdir/$m4base"/*.m4 >/dev/null 2>/dev/null; then
     echo "AC_GNU_SOURCE"
     echo
   fi
   for module in $modules; do
     func_verify_nontests_module
     if test -n "$module"; then
       func_get_autoconf_early_snippet "$module"
     fi
   done \
     | sed -e '/^$/d;' -e 's/AC_REQUIRE(\[\([^()]*\)\])/\1/'
   if test "$libtool" = true; then
     echo "AM_CONDITIONAL([GL_COND_LIBTOOL], [true])"
     echo "gl_cond_libtool=true"
   else
     echo "AM_CONDITIONAL([GL_COND_LIBTOOL], [false])"
     echo "gl_cond_libtool=false"
     echo "gl_libdeps="
     echo "gl_ltlibdeps="
   fi
   echo "gl_source_base='$sourcebase'"
   # Wrap the set of autoconf snippets into an autoconf macro that is then
   # invoked. This is needed because autoconf does not support AC_REQUIRE
   # at the top level:
   #   error: AC_REQUIRE(gt_CSHARPCOMP): cannot be used outside of an AC_DEFUN'd macro
   # but we want the AC_REQUIRE to have its normal meaning (provide one
   # expansion of the required macro before the current point, and only one
   # expansion total).
   echo "AC_DEFUN([gl_INIT], ["
   func_emit_initmacro_start
   if test "$auxdir" != "build-aux"; then
     sed_replace_build_aux='
       :a
       /AC_CONFIG_FILES(.*:build-aux\/.*)/{
         s|AC_CONFIG_FILES(\(.*\):build-aux/\(.*\))|AC_CONFIG_FILES(\1:'"$auxdir"'/\2)|
         ba
       }'
   else
     sed_replace_build_aux=
   fi
   for module in $modules; do
     func_verify_nontests_module
     if test -n "$module"; then
       func_get_autoconf_snippet "$module" \
         | sed -e "$sed_replace_build_aux"
     fi
   done
   # _LIBDEPS and _LTLIBDEPS variables are not needed if this library is
   # created using libtool, because libtool already handles the dependencies.
   if test "$libtool" != true; then
     libname_upper=`echo "$libname" | LC_ALL=C tr 'a-z-' 'A-Z_'`
     echo "  ${libname_upper}_LIBDEPS=\"\$gl_libdeps\""
     echo "  AC_SUBST([${libname_upper}_LIBDEPS])"
     echo "  ${libname_upper}_LTLIBDEPS=\"\$gl_ltlibdeps\""
     echo "  AC_SUBST([${libname_upper}_LTLIBDEPS])"
   fi
   func_emit_initmacro_end
   echo "])"
   func_emit_initmacro_done
   echo
   echo "gl_INIT"
   echo
   if test -n "$subdirs_with_configure_ac"; then
     echo "AC_CONFIG_SUBDIRS(["`echo $subdirs_with_configure_ac`"])"
   fi
   makefiles="Makefile"
   for d in $subdirs; do
     # For subdirs that have a configure.ac by their own, it's the subdir's
     # configure.ac which creates the subdir's Makefile.am, not this one.
     case " $subdirs_with_configure_ac " in
       *" $d "*) ;;
       *) func_append makefiles " $d/Makefile" ;;
     esac
   done
   echo "AC_OUTPUT([$makefiles])"
  ) > "$testdir/configure.ac"

  # Create autogenerated files.
  (cd "$testdir"
   # Do not use "${AUTORECONF} --force --install", because it may invoke
   # autopoint, which brings in older versions of some of our .m4 files.
   if test -f $m4base/gettext.m4; then
     func_execute_command ${AUTOPOINT} --force || func_exit 1
     for f in $m4base/*.m4~; do
       mv -f $f `echo $f | sed -e 's,~$,,'` || func_exit 1
     done
   fi
   func_execute_command ${ACLOCAL} -I $m4base || func_exit 1
   if ! test -d build-aux; then
     func_execute_command mkdir build-aux || func_exit 1
   fi
   func_execute_command ${AUTOCONF} || func_exit 1
   func_execute_command ${AUTOHEADER} || func_exit 1
   func_execute_command ${AUTOMAKE} --add-missing --copy || func_exit 1
  ) || func_exit 1
  if test -n "$inctests"; then
    # Create autogenerated files.
    (cd "$testdir/$testsbase" || func_exit 1
     # Do not use "${AUTORECONF} --force --install", because it may invoke
     # autopoint, which brings in older versions of some of our .m4 files.
     if test -f ../$m4base/gettext.m4; then
       func_execute_command ${AUTOPOINT} --force || func_exit 1
       for f in ../$m4base/*.m4~; do
         mv -f $f `echo $f | sed -e 's,~$,,'` || func_exit 1
       done
     fi
     func_execute_command ${ACLOCAL} -I ../$m4base || func_exit 1
     if ! test -d ../build-aux; then
       func_execute_command mkdir ../build-aux
     fi
     func_execute_command ${AUTOCONF} || func_exit 1
     func_execute_command ${AUTOHEADER} || func_exit 1
     func_execute_command ${AUTOMAKE} --add-missing --copy || func_exit 1
    ) || func_exit 1
  fi
  # Need to run configure and make once, to create built files that are to be
  # distributed (such as getdate.c).
  # Extract the value of "CLEANFILES += ..." and "MOSTLYCLEANFILES += ...".
  cleaned_files=`sed -e "$sed_remove_backslash_newline" < "$testdir/$sourcebase/Makefile.am" \
                 | sed -n -e 's,^CLEANFILES[     ]*+=\([^#]*\).*$,\1,p' -e 's,^MOSTLYCLEANFILES[         ]*+=\([^#]*\).*$,\1,p'`
  cleaned_files=`for file in $cleaned_files; do echo " $file "; done`
  # Extract the value of "BUILT_SOURCES += ...". Remove variable references
  # such $(FOO_H) because they don't refer to distributed files.
  sed_remove_make_variables='s,[$]([A-Za-z0-9_]*),,g'
  built_sources=`sed -e "$sed_remove_backslash_newline" < "$testdir/$sourcebase/Makefile.am" \
                 | sed -n -e 's,^BUILT_SOURCES[  ]*+=\([^#]*\).*$,\1,p' \
                 | sed -e "$sed_remove_make_variables"`
  distributed_built_sources=`for file in $built_sources; do
                               case "$cleaned_files" in
                                 *" "$file" "*) ;;
                                 *) echo $file ;;
                               esac;
                             done`
  if test -n "$distributed_built_sources"; then
    (cd "$testdir"
     ./configure || func_exit 1
       cd "$sourcebase"
       echo 'built_sources: $(BUILT_SOURCES)' >> Makefile
       make built_sources || func_exit 1
       cd ..
     make distclean || func_exit 1
    ) || func_exit 1
  fi
}

# func_create_megatestdir megatestdir allmodules
# Input:
# - local_gnulib_dir  from --local-dir
# - auxdir          directory relative to destdir where to place build aux files
func_create_megatestdir ()
{
  megatestdir="$1"
  allmodules="$2"
  if test -z "$allmodules"; then
    allmodules=`func_all_modules`
  fi

  megasubdirs=
  # First, all modules one by one.
  for onemodule in $allmodules; do
    func_create_testdir "$megatestdir/$onemodule" $onemodule
    func_append megasubdirs "$onemodule "
  done
  # Then, all modules all together.
  # Except config-h, which breaks all modules which use HAVE_CONFIG_H.
  # Except fnmatch-posix, which conflicts with fnmatch-gnu. FIXME.
  allmodules=`for m in $allmodules; do if test $m != config-h && test $m != fnmatch-posix; then echo $m; fi; done`
  func_create_testdir "$megatestdir/ALL" "$allmodules"
  func_append megasubdirs "ALL"

  # Create autobuild.
  cvsdate=`if test -f "$gnulib_dir/CVS/Entries"; then \
             vc_witness="$gnulib_dir/CVS/Entries"; \
           else \
             vc_witness="$gnulib_dir/.git/refs/heads/master"; \
           fi; \
           sh "$gnulib_dir/build-aux/mdate-sh" "$vc_witness" \
             | sed -e 's,January,01,'   -e 's,Jan,01,' \
                   -e 's,February,02,'  -e 's,Feb,02,' \
                   -e 's,March,03,'     -e 's,Mar,03,' \
                   -e 's,April,04,'     -e 's,Apr,04,' \
                   -e 's,May,05,'                      \
                   -e 's,June,06,'      -e 's,Jun,06,' \
                   -e 's,July,07,'      -e 's,Jul,07,' \
                   -e 's,August,08,'    -e 's,Aug,08,' \
                   -e 's,September,09,' -e 's,Sep,09,' \
                   -e 's,October,10,'   -e 's,Oct,10,' \
                   -e 's,November,11,'  -e 's,Nov,11,' \
                   -e 's,December,12,'  -e 's,Dec,12,' \
                   -e 's,^,00,' -e 's,^[0-9]*\([0-9][0-9] \),\1,' \
                   -e 's,^\([0-9]*\) \([0-9]*\) \([0-9]*\),\3\2\1,'`
  (echo '#!/bin/sh'
   echo "CVSDATE=$cvsdate"
   echo "test -d logs || mkdir logs"
   echo "for module in $megasubdirs; do"
   echo "  echo \"Working on module \$module...\""
   echo "  safemodule=\`echo \$module | sed -e 's|/|-|g'\`"
   echo "  (echo \"To: gnulib@autobuild.josefsson.org\""
   echo "   echo"
   echo "   set -x"
   echo "   : autobuild project... \$module"
   echo "   : autobuild revision... cvs-\$CVSDATE-000000"
   echo "   : autobuild timestamp... \`date \"+%Y%m%d-%H%M%S\"\`"
   echo "   : autobuild hostname... \`hostname\`"
   echo "   cd \$module && ./configure \$CONFIGURE_OPTIONS && make && make check && make distclean"
   echo "   echo rc=\$?"
   echo "  ) 2>&1 | { if test -n \"\$AUTOBUILD_SUBST\"; then sed -e \"\$AUTOBUILD_SUBST\"; else cat; fi; } > logs/\$safemodule"
   echo "done"
  ) > "$megatestdir/do-autobuild"
  chmod a+x "$megatestdir/do-autobuild"

  # Create Makefile.am.
  (echo "## Process this file with automake to produce Makefile.in."
   echo
   echo "AUTOMAKE_OPTIONS = 1.5 foreign"
   echo
   echo "SUBDIRS = $megasubdirs"
   echo
   echo "EXTRA_DIST = do-autobuild"
  ) > "$megatestdir/Makefile.am"

  # Create configure.ac.
  (echo "# Process this file with autoconf to produce a configure script."
   echo "AC_INIT([dummy], [0])"
   if test "$auxdir" != "."; then
     echo "AC_CONFIG_AUX_DIR([$auxdir])"
   fi
   echo "AM_INIT_AUTOMAKE"
   echo
   echo "AC_PROG_MAKE_SET"
   echo
   echo "AC_CONFIG_SUBDIRS([$megasubdirs])"
   echo "AC_OUTPUT([Makefile])"
  ) > "$megatestdir/configure.ac"

  # Create autogenerated files.
  (cd "$megatestdir"
   # Do not use "${AUTORECONF} --install", because autoreconf operates
   # recursively, but the subdirectories are already finished, therefore
   # calling autoreconf here would only waste lots of CPU time.
   func_execute_command ${ACLOCAL} || func_exit 1
   func_execute_command mkdir build-aux
   func_execute_command ${AUTOCONF} || func_exit 1
   func_execute_command ${AUTOMAKE} --add-missing --copy || func_exit 1
  ) || func_exit 1
}

case $mode in
  "" )
    func_fatal_error "no mode specified" ;;

  list )
    func_all_modules
    ;;

  import | update )

    # Where to import.
    if test -z "$destdir"; then
      destdir=.
    fi
    test -d "$destdir" \
      || func_fatal_error "destination directory does not exist: $destdir"

    # Prefer configure.ac to configure.in.
    if test -f "$destdir"/configure.ac; then
      configure_ac="$destdir/configure.ac"
    else
      if test -f "$destdir"/configure.in; then
        configure_ac="$destdir/configure.in"
      else
        func_fatal_error "cannot find $destdir/configure.ac"
      fi
    fi

    # Analyze configure.ac.
    guessed_auxdir="."
    guessed_libtool=false
    my_sed_traces='
      s,#.*$,,
      s,^dnl .*$,,
      s, dnl .*$,,
      /AC_CONFIG_AUX_DIR/ {
        s,^.*AC_CONFIG_AUX_DIR([[ ]*\([^])]*\).*$,guessed_auxdir="\1",p
      }
      /A[CM]_PROG_LIBTOOL/ {
        s,^.*$,guessed_libtool=true,p
      }'
    eval `sed -n -e "$my_sed_traces" < "$configure_ac"`

    if test -z "$auxdir"; then
      auxdir="$guessed_auxdir"
    fi

    # Determine where to apply func_import.
    if test -n "$m4base"; then
      # Apply func_import to a particular gnulib directory.
      # Any number of additional modules can be given.
      if test ! -f "$destdir/$m4base"/gnulib-cache.m4; then
        # First use of gnulib in the given m4base.
        test -n "$supplied_libname" || supplied_libname=true
        test -n "$sourcebase" || sourcebase="lib"
        test -n "$docbase" || docbase="doc"
        test -n "$testsbase" || testsbase="tests"
        test -n "$macro_prefix" || macro_prefix="gl"
      fi
      func_import "$*"
    else
      # Apply func_import to all gnulib directories.
      # To get this list of directories, look at Makefile.am. (Not at
      # configure, because it may be omitted from CVS. Also, don't run
      # "find $destdir -name gnulib-cache.m4", as it might be too expensive.)
      m4dirs=
      m4dirs_count=0
      if test -f "$destdir"/Makefile.am; then
        aclocal_amflags=`sed -n 's/^ACLOCAL_AMFLAGS[     ]*=\(.*\)$/\1/p' "$destdir"/Makefile.am`
        m4dir_is_next=
        for arg in $aclocal_amflags; do
          if test -n "$m4dir_is_next"; then
            # Ignore absolute directory pathnames, like /usr/local/share/aclocal.
            case "$arg" in
              /*) ;;
              *)
                if test -f "$destdir/$arg"/gnulib-cache.m4; then
                  func_append m4dirs " $arg"
                  m4dirs_count=`expr $m4dirs_count + 1`
                fi
                ;;
            esac
            m4dir_is_next=
          else
            if test "X$arg" = "X-I"; then
              m4dir_is_next=yes
            else
              m4dir_is_next=
            fi
          fi
        done
      else
        # No Makefile.am! Oh well. Look at the last generated aclocal.m4.
        if test -f "$destdir"/aclocal.m4; then
          sedexpr1='s,^m4_include(\[\(.*\)])$,\1,p'
          sedexpr2='s,^[^/]*$,.,'
          sedexpr3='s,/[^/]*$,,'
          m4dirs=`sed -n -e "$sedexpr1" aclocal.m4 | sed -e "$sedexpr2" -e "$sedexpr3" | LC_ALL=C sort -u`
          m4dirs_count=`echo "$m4dirs" | wc -l`
        fi
      fi
      if test $m4dirs_count = 0; then
        # First use of gnulib in a package.
        # Any number of additional modules can be given.
        test -n "$supplied_libname" || supplied_libname=true
        test -n "$sourcebase" || sourcebase="lib"
        m4base="m4"
        test -n "$docbase" || docbase="doc"
        test -n "$testsbase" || testsbase="tests"
        test -n "$macro_prefix" || macro_prefix="gl"
        func_import "$*"
      else
        if test $m4dirs_count = 1; then
          # There's only one use of gnulib here. Assume the user means it.
          # Any number of additional modules can be given.
          for m4base in $m4dirs; do
            func_import "$*"
          done
        else
          # Ambiguous - guess what the user meant.
          if test $# = 0; then
            # No further arguments. Guess the user wants to update all of them.
            for m4base in $m4dirs; do
              # Perform func_import in a subshell, so that variable values
              # such as
              #   local_gnulib_dir, avoidlist, sourcebase, m4base, pobase,
              #   docbase, testsbase, inctests, libname, lgpl, makefile_name,
              #   libtool, macro_prefix, po_domain
              # don't propagate from one directory to another.
              (func_import) || func_exit 1
            done
          else
            # Really ambiguous.
            func_fatal_error "Ambiguity: to which directory should the modules be added? Please specify at least --m4-base=..."
          fi
        fi
      fi
    fi
    ;;

  create-testdir )
    if test -z "$destdir"; then
      func_fatal_error "please specify --dir option"
    fi
    mkdir "$destdir"
    test -d "$destdir" \
      || func_fatal_error "could not create destination directory"
    test -n "$auxdir" || auxdir="build-aux"
    func_create_testdir "$destdir" "$*"
    ;;

  create-megatestdir )
    if test -z "$destdir"; then
      func_fatal_error "please specify --dir option"
    fi
    mkdir "$destdir" || func_fatal_error "could not create destination directory"
    test -n "$auxdir" || auxdir="build-aux"
    func_create_megatestdir "$destdir" "$*"
    ;;

  test )
    test -n "$destdir" || destdir=testdir$$
    mkdir "$destdir" || func_fatal_error "could not create destination directory"
    test -n "$auxdir" || auxdir="build-aux"
    func_create_testdir "$destdir" "$*"
    cd "$destdir"
      mkdir build
      cd build
        ../configure || func_exit 1
        make || func_exit 1
        make check || func_exit 1
        make distclean || func_exit 1
        remaining=`find . -type f -print`
        if test -n "$remaining"; then
          echo "Remaining files:" $remaining 1>&2
          echo "gnulib-tool: *** Stop." 1>&2
          func_exit 1
        fi
      cd ..
    cd ..
    rm -rf "$destdir"
    ;;

  megatest )
    test -n "$destdir" || destdir=testdir$$
    mkdir "$destdir" || func_fatal_error "could not create destination directory"
    test -n "$auxdir" || auxdir="build-aux"
    func_create_megatestdir "$destdir" "$*"
    cd "$destdir"
      mkdir build
      cd build
        ../configure
        make
        make check
        make distclean
        remaining=`find . -type f -print`
        if test -n "$remaining"; then
          echo "Remaining files:" $remaining 1>&2
          echo "gnulib-tool: *** Stop." 1>&2
          func_exit 1
        fi
      cd ..
    cd ..
    rm -rf "$destdir"
    ;;

  extract-description )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_description "$module"
      fi
    done
    ;;

  extract-notice )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_notice "$module"
      fi
    done
    ;;

  extract-filelist )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_filelist "$module"
      fi
    done
    ;;

  extract-dependencies )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_dependencies "$module"
      fi
    done
    ;;

  extract-autoconf-snippet )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_autoconf_snippet "$module"
      fi
    done
    ;;

  extract-automake-snippet )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_automake_snippet "$module"
      fi
    done
    ;;

  extract-include-directive )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_include_directive "$module"
      fi
    done
    ;;

  extract-link-directive )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_link_directive "$module"
      fi
    done
    ;;

  extract-license )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_license "$module"
      fi
    done
    ;;

  extract-maintainer )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_maintainer "$module"
      fi
    done
    ;;

  extract-tests-module )
    for module
    do
      func_verify_module
      if test -n "$module"; then
        func_get_tests_module "$module"
      fi
    done
    ;;

  * )
    func_fatal_error "unknown operation mode --$mode" ;;
esac

rm -rf "$tmp"
# Undo the effect of the previous 'trap' command. Some shellology:
# We cannot use "trap - 0 1 2 3 13 15", because Solaris sh would attempt to
# execute the command "-". "trap '' ..." is fine only for signal 0 (= normal
# exit); for the others we need to call 'exit' explicitly. The value of $? is
# 128 + signal number and is set before the trap-registered command is run.
trap '' 0
trap 'func_exit $?' 1 2 3 13 15

exit 0

# Local Variables:
# indent-tabs-mode: nil
# whitespace-check-buffer-indent: nil
# End: