1 % texinfo.tex -- TeX macros to handle Texinfo files.
3 % Load plain if necessary, i.e., if running under initex.
4 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
6 \def\texinfoversion{2003-08-11.14}
8 % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
9 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
11 % This texinfo.tex file is free software; you can redistribute it and/or
12 % modify it under the terms of the GNU General Public License as
13 % published by the Free Software Foundation; either version 2, or (at
14 % your option) any later version.
16 % This texinfo.tex file is distributed in the hope that it will be
17 % useful, but WITHOUT ANY WARRANTY; without even the implied warranty
18 % of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 % General Public License for more details.
21 % You should have received a copy of the GNU General Public License
22 % along with this texinfo.tex file; see the file COPYING. If not, write
23 % to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
24 % Boston, MA 02111-1307, USA.
26 % In other words, you are welcome to use, share and improve this program.
27 % You are forbidden to forbid anyone else to use, share and improve
28 % what you give them. Help stamp out software-hoarding!
30 % Please try the latest version of texinfo.tex before submitting bug
31 % reports; you can get the latest version from:
32 % ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex
33 % (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
34 % ftp://tug.org/tex/texinfo.tex
35 % (and all CTAN mirrors, see http://www.ctan.org),
36 % and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
38 % The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
40 % The texinfo.tex in any given Texinfo distribution could well be out
41 % of date, so if that's what you're using, please check.
43 % Send bug reports to bug-texinfo@gnu.org. Please include including a
44 % complete document in each bug report with which we can reproduce the
45 % problem. Patches are, of course, greatly appreciated.
47 % To process a Texinfo manual with TeX, it's most reliable to use the
48 % texi2dvi shell script that comes with the distribution. For a simple
49 % manual foo.texi, however, you can get away with this:
54 % dvips foo.dvi -o # or whatever; this makes foo.ps.
55 % The extra TeX runs get the cross-reference information correct.
56 % Sometimes one run after texindex suffices, and sometimes you need more
57 % than two; texi2dvi does it as many times as necessary.
59 % It is possible to adapt texinfo.tex for other languages, to some
60 % extent. You can get the existing language-specific files from the
61 % full Texinfo distribution.
63 \message{Loading texinfo [version \texinfoversion]:}
65 % If in a .fmt file, print the version number
66 % and turn on active characters that we couldn't do earlier because
67 % they might have appeared in the input file name.
68 \everyjob{\message{[Texinfo version \texinfoversion]}%
69 \catcode`+=\active \catcode`\_=\active}
74 % We never want plain's \outer definition of \+ in Texinfo.
75 % For @tex, we can use \tabalign.
78 % Save some plain tex macros whose names we will redefine.
80 \let\ptexbullet=\bullet
91 \let\ptexindent=\indent
100 % If this character appears in an error message or help string, it
101 % starts a new line in the output.
104 % Set up fixed words for English if not already set.
105 \ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
106 \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
107 \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
108 \ifx\putwordin\undefined \gdef\putwordin{in}\fi
109 \ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
110 \ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
111 \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
112 \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
113 \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
114 \ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
115 \ifx\putwordof\undefined \gdef\putwordof{of}\fi
116 \ifx\putwordon\undefined \gdef\putwordon{on}\fi
117 \ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
118 \ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
119 \ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
120 \ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
121 \ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
122 \ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
123 \ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
125 \ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
126 \ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
127 \ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
128 \ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
129 \ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
130 \ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
131 \ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
132 \ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
133 \ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
134 \ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
135 \ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
136 \ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
138 \ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
139 \ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
140 \ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
141 \ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
142 \ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
143 \ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
144 \ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
146 % In some macros, we cannot use the `\? notation---the left quote is
147 % in some cases the escape char.
148 \chardef\colonChar = `\:
149 \chardef\commaChar = `\,
150 \chardef\dotChar = `\.
151 \chardef\equalChar = `\=
152 \chardef\exclamChar= `\!
153 \chardef\questChar = `\?
154 \chardef\semiChar = `\;
155 \chardef\spaceChar = `\ %
156 \chardef\underChar = `\_
162 % True if #1 is the empty string, i.e., called like `\ifempty{}'.
164 \def\ifempty#1{\ifemptyx #1\emptymarkA\emptymarkB}%
165 \def\ifemptyx#1#2\emptymarkB{\ifx #1\emptymarkA}%
168 \hyphenation{ap-pen-dix}
170 \hyphenation{mini-buf-fer mini-buf-fers}
171 \hyphenation{time-stamp}
172 \hyphenation{white-space}
174 % Margin to add to right of even pages, to left of odd pages.
175 \newdimen\bindingoffset
176 \newdimen\normaloffset
177 \newdimen\pagewidth \newdimen\pageheight
179 % Sometimes it is convenient to have everything in the transcript file
180 % and nothing on the terminal. We don't just call \tracingall here,
181 % since that produces some useless output on the terminal. We also make
182 % some effort to order the tracing commands to reduce output in the log
183 % file; cf. trace.sty in LaTeX.
185 \def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
189 \tracinglostchars2 % 2 gives us more in etex
194 \showboxbreadth\maxdimen \showboxdepth\maxdimen
195 \ifx\eTeXversion\undefined\else % etex gives us more logging
202 \tracingcommands3 % 3 gives us more in etex
203 \errorcontextlines\maxdimen
206 % add check for \lastpenalty to plain's definitions. If the last thing
207 % we did was a \nobreak, we don't want to insert more space.
209 \def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
210 \removelastskip\penalty-50\smallskip\fi\fi}
211 \def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
212 \removelastskip\penalty-100\medskip\fi\fi}
213 \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
214 \removelastskip\penalty-200\bigskip\fi\fi}
216 % For @cropmarks command.
217 % Do @cropmarks to get crop marks.
220 \let\cropmarks = \cropmarkstrue
222 % Dimensions to add cropmarks at corners.
223 % Added by P. A. MacKay, 12 Nov. 1986
225 \newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
226 \newdimen\cornerlong \cornerlong=1pc
227 \newdimen\cornerthick \cornerthick=.3pt
228 \newdimen\topandbottommargin \topandbottommargin=.75in
230 % Main output routine.
232 \output = {\onepageout{\pagecontents\PAGE}}
237 % \onepageout takes a vbox as an argument. Note that \pagecontents
238 % does insertions, but you have to call it yourself.
240 \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
242 \ifodd\pageno \advance\hoffset by \bindingoffset
243 \else \advance\hoffset by -\bindingoffset\fi
245 % Do this outside of the \shipout so @code etc. will be expanded in
246 % the headline as they should be, not taken literally (outputting ''code).
247 \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
248 \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
251 % Have to do this stuff outside the \shipout because we want it to
252 % take effect in \write's, yet the group defined by the \vbox ends
253 % before the \shipout runs.
255 \escapechar = `\\ % use backslash in output files.
256 \indexdummies % don't expand commands in the output.
257 \normalturnoffactive % \ in index entries must not stay \, e.g., if
258 % the page break happens to be in the middle of an example.
260 \ifcropmarks \vbox to \outervsize\bgroup
262 \vskip-\topandbottommargin
264 \line{\ewtop\hfil\ewtop}%
267 \vbox{\moveleft\cornerthick\nstop}%
269 \vbox{\moveright\cornerthick\nstop}%
272 \vskip\topandbottommargin
274 \hfil % center the page within the outer (page) hsize.
275 \ifodd\pageno\hskip\bindingoffset\fi
279 % Do this early so pdf references go to the beginning of the page.
280 \ifpdfmakepagedest \pdfmkdest{\the\pageno}\fi
284 \ifdim\ht\footlinebox > 0pt
285 % Only leave this space if the footline is nonempty.
286 % (We lessened \vsize for it in \oddfootingxxx.)
287 % The \baselineskip=24pt in plain's \makefootline has no effect.
288 \vskip 2\baselineskip
293 \egroup % end of \vbox\bgroup
294 \hfil\egroup % end of (centering) \line\bgroup
295 \vskip\topandbottommargin plus1fill minus1fill
296 \boxmaxdepth = \cornerthick
299 \vbox{\moveleft\cornerthick\nsbot}%
301 \vbox{\moveright\cornerthick\nsbot}%
304 \line{\ewbot\hfil\ewbot}%
306 \egroup % \vbox from first cropmarks clause
308 }% end of \shipout\vbox
309 }% end of group with \normalturnoffactive
311 \ifnum\outputpenalty>-20000 \else\dosupereject\fi
314 \newinsert\margin \dimen\margin=\maxdimen
316 \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
318 \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
319 % marginal hacks, juha@viisa.uucp (Juha Takala)
320 \ifvoid\margin\else % marginal info is present
321 \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
322 \dimen@=\dp#1 \unvbox#1
323 \ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
324 \ifr@ggedbottom \kern-\dimen@ \vfil \fi}
327 % Here are the rules for the cropmarks. Note that they are
328 % offset so that the space between them is truly \outerhsize or \outervsize
329 % (P. A. MacKay, 12 November, 1986)
331 \def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
333 {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
334 \def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
336 {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
338 % Parse an argument, then pass it to #1. The argument is the rest of
339 % the input line (except we remove a trailing comment). #1 should be a
340 % macro which expects an ordinary undelimited TeX argument.
346 \futurelet\temp\parseargx
349 % If the next token is an obeyed space (from an @example environment or
350 % the like), remove it and recurse. Otherwise, we're done.
352 % \obeyedspace is defined far below, after the definition of \sepspaces.
353 \ifx\obeyedspace\temp
354 \expandafter\parseargdiscardspace
356 \expandafter\parseargline
360 % Remove a single space (as the delimiter token to the macro call).
362 \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
365 \gdef\parseargline#1^^M{%
366 \endgroup % End of the group started in \parsearg.
368 % First remove any @c comment, then any @comment.
369 % Result of each macro is put in \toks0.
370 \argremovec #1\c\relax %
371 \expandafter\argremovecomment \the\toks0 \comment\relax %
373 % Call the caller's macro, saved as \next in \parsearg.
374 \expandafter\next\expandafter{\the\toks0}%
378 % Since all \c{,omment} does is throw away the argument, we can let TeX
379 % do that for us. The \relax here is matched by the \relax in the call
380 % in \parseargline; it could be more or less anything, its purpose is
381 % just to delimit the argument to the \c.
382 \def\argremovec#1\c#2\relax{\toks0 = {#1}}
383 \def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
385 % \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
386 % @end itemize @c foo
387 % will have two active spaces as part of the argument with the
388 % `itemize'. Here we remove all active spaces from #1, and assign the
391 % This loses if there are any *other* active characters besides spaces
392 % in the argument -- _ ^ +, for example -- since they get expanded.
393 % Fortunately, Texinfo does not define any such commands. (If it ever
394 % does, the catcode of the characters in questionwill have to be changed
395 % here.) But this means we cannot call \removeactivespaces as part of
396 % \argremovec{,omment}, since @c uses \parsearg, and thus the argument
397 % that \parsearg gets might well have any character at all in it.
399 \def\removeactivespaces#1{%
403 \global\toks0 = \expandafter{\temp}%
407 % Change the active space to expand to nothing.
411 \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
415 \def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
417 %% These are used to keep @begin/@end levels from running away
418 %% Call \inENV within environments (after a \begingroup)
419 \newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
421 \ifENV\errmessage{Still within an environment; press RETURN to continue}
422 \endgroup\fi} % This is not perfect, but it should reduce lossage
424 % @begin foo is the same as @foo, for now.
425 \newhelp\EMsimple{Press RETURN to continue.}
427 \outer\def\begin{\parsearg\beginxxx}
430 \expandafter\ifx\csname #1\endcsname\relax
431 {\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
432 \csname #1\endcsname\fi}
434 % @end foo executes the definition of \Efoo.
436 \def\end{\parsearg\endxxx}
438 \removeactivespaces{#1}%
439 \edef\endthing{\the\toks0}%
441 \expandafter\ifx\csname E\endthing\endcsname\relax
442 \expandafter\ifx\csname \endthing\endcsname\relax
443 % There's no \foo, i.e., no ``environment'' foo.
445 \errmessage{Undefined command `@end \endthing'}%
447 \unmatchedenderror\endthing
450 % Everything's ok; the right environment has been started.
451 \csname E\endthing\endcsname
455 % There is an environment #1, but it hasn't been started. Give an error.
457 \def\unmatchedenderror#1{%
459 \errmessage{This `@end #1' doesn't have a matching `@#1'}%
462 % Define the control sequence \E#1 to give an unmatched @end error.
464 \def\defineunmatchedend#1{%
465 \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
469 %% Simple single-character @ commands
472 % Kludge this until the fonts are right (grr).
475 % This is turned off because it was never documented
476 % and you can use @w{...} around a quote to suppress ligatures.
477 %% Define @` and @' to be the same as ` and '
478 %% but suppressing ligatures.
482 % Used to generate quoted braces.
483 \def\mylbrace {{\tt\char123}}
484 \def\myrbrace {{\tt\char125}}
488 % Definitions to produce \{ and \} commands for indices,
489 % and @{ and @} for the aux file.
490 \catcode`\{ = \other \catcode`\} = \other
491 \catcode`\[ = 1 \catcode`\] = 2
492 \catcode`\! = 0 \catcode`\\ = \other
495 !gdef!lbraceatcmd[@{]%
496 !gdef!rbraceatcmd[@}]%
499 % Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
500 % Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
503 \def\ringaccent#1{{\accent23 #1}}
508 % Other special characters: @questiondown @exclamdown
509 % Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
510 \def\questiondown{?`}
513 % Dotless i and dotless j, used for accents.
518 \ifx\temp\imacro \ptexi
519 \else\ifx\temp\jmacro \j
520 \else \errmessage{@dotless can be used only with i or j}%
524 % Be sure we're in horizontal mode when doing a tie, since we make space
525 % equivalent to this in @example-like environments. Otherwise, a space
526 % at the beginning of a line will start with \penalty -- and
527 % since \penalty is valid in vertical mode, we'd end up putting the
528 % penalty on the vertical list instead of in the new paragraph.
530 % Avoid using \@M directly, because that causes trouble
531 % if the definition is written into an index file.
532 \global\let\tiepenalty = \@M
533 \gdef\tie{\leavevmode\penalty\tiepenalty\ }
536 % @: forces normal size whitespace following.
537 \def\:{\spacefactor=1000 }
539 % @* forces a line break.
540 \def\*{\hfil\break\hbox{}\ignorespaces}
542 % @/ allows a line break.
545 % @. is an end-of-sentence period.
546 \def\.{.\spacefactor=3000 }
548 % @! is an end-of-sentence bang.
549 \def\!{!\spacefactor=3000 }
551 % @? is an end-of-sentence query.
552 \def\?{?\spacefactor=3000 }
554 % @w prevents a word break. Without the \leavevmode, @w at the
555 % beginning of a paragraph, when TeX is still in vertical mode, would
556 % produce a whole line of output instead of starting the paragraph.
557 \def\w#1{\leavevmode\hbox{#1}}
559 % @group ... @end group forces ... to be all on one page, by enclosing
560 % it in a TeX vbox. We use \vtop instead of \vbox to construct the box
561 % to keep its height that of a normal line. According to the rules for
562 % \topskip (p.114 of the TeXbook), the glue inserted is
563 % max (\topskip - \ht (first item), 0). If that height is large,
564 % therefore, no glue is inserted, and the space between the headline and
565 % the text is small, which looks bad.
567 % Another complication is that the group might be very large. This can
568 % cause the glue on the previous page to be unduly stretched, because it
569 % does not have much material. In this case, it's better to add an
570 % explicit \vfill so that the extra space is at the bottom. The
571 % threshold for doing this is if the group is more than \vfilllimit
572 % percent of a page (\vfilllimit can be changed inside of @tex).
577 \def\group{\begingroup
578 \ifnum\catcode13=\active \else
579 \errhelp = \groupinvalidhelp
580 \errmessage{@group invalid in context where filling is enabled}%
583 % The \vtop we start below produces a box with normal height and large
584 % depth; thus, TeX puts \baselineskip glue before it, and (when the
585 % next line of text is done) \lineskip glue after it. (See p.82 of
586 % the TeXbook.) Thus, space below is not quite equal to space
587 % above. But it's pretty close.
589 \egroup % End the \vtop.
590 % \dimen0 is the vertical size of the group's box.
591 \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
592 % \dimen2 is how much space is left on the page (more or less).
593 \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
594 % if the group doesn't fit on the current page, and it's a big big
595 % group, force a page break.
596 \ifdim \dimen0 > \dimen2
597 \ifdim \pagetotal < \vfilllimit\pageheight
602 \endgroup % End the \group.
605 \setbox\groupbox = \vtop\bgroup
606 % We have to put a strut on the last line in case the @group is in
607 % the midst of an example, rather than completely enclosing it.
608 % Otherwise, the interline space between the last line of the group
609 % and the first line afterwards is too small. But we can't put the
610 % strut in \Egroup, since there it would be on a line by itself.
611 % Hence this just inserts a strut at the beginning of each line.
612 \everypar = {\strut}%
614 % Since we have a strut on every line, we don't need any of TeX's
615 % normal interline spacing.
618 % OK, but now we have to do something about blank
619 % lines in the input in @example-like environments, which normally
620 % just turn into \lisppar, which will insert no space now that we've
621 % turned off the interline space. Simplest is to make them be an
624 \edef\par{\leavevmode \par}%
626 % Reset ^^M's definition to new definition of \par.
630 % Do @comment since we are called inside an environment such as
631 % @example, where each end-of-line in the input causes an
632 % end-of-line in the output. We don't want the end-of-line after
633 % the `@group' to put extra space in the output. Since @group
634 % should appear on a line by itself (according to the Texinfo
635 % manual), we don't worry about eating any user text.
639 % TeX puts in an \escapechar (i.e., `@') at the beginning of the help
640 % message, so this ends up printing `@group can only ...'.
642 \newhelp\groupinvalidhelp{%
643 group can only be used in environments such as @example,^^J%
644 where each line of input produces a line of output.}
646 % @need space-in-mils
647 % forces a page break if there is not space-in-mils remaining.
649 \newdimen\mil \mil=0.001in
651 \def\need{\parsearg\needx}
653 % Old definition--didn't work.
654 %\def\needx #1{\par %
655 %% This method tries to make TeX break the page naturally
656 %% if the depth of the box does not fit.
658 %\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
663 % Ensure vertical mode, so we don't make a big box in the middle of a
667 % If the @need value is less than one line space, it's useless.
669 \dimen2 = \ht\strutbox
670 \advance\dimen2 by \dp\strutbox
671 \ifdim\dimen0 > \dimen2
673 % Do a \strut just to make the height of this box be normal, so the
674 % normal leading is inserted relative to the preceding line.
675 % And a page break here is fine.
676 \vtop to #1\mil{\strut\vfil}%
678 % TeX does not even consider page breaks if a penalty added to the
679 % main vertical list is 10000 or more. But in order to see if the
680 % empty box we just added fits on the page, we must make it consider
681 % page breaks. On the other hand, we don't want to actually break the
682 % page after the empty box. So we use a penalty of 9999.
684 % There is an extremely small chance that TeX will actually break the
685 % page at this \penalty, if there are no other feasible breakpoints in
686 % sight. (If the user is using lots of big @group commands, which
687 % almost-but-not-quite fill up a page, TeX will have a hard time doing
688 % good page breaking, for example.) However, I could not construct an
689 % example where a page broke at this \penalty; if it happens in a real
690 % document, then we can reconsider our strategy.
693 % Back up by the size of the box, whether we did a page break or not.
696 % Do not allow a page break right after this kern.
701 % @br forces paragraph break
705 % @dots{} output an ellipsis using the current font.
706 % We do .5em per period so that it has the same spacing in a typewriter
707 % font as three actual period characters.
712 \hskip 0pt plus 0.25fil minus 0.25fil
714 \hskip 0pt plus 0.5fil minus 0.5fil
718 % @enddots{} is an end-of-sentence ellipsis.
723 \hskip 0pt plus 0.25fil minus 0.25fil
725 \hskip 0pt plus 0.5fil minus 0.5fil
730 % @page forces the start of a new page.
732 \def\page{\par\vfill\supereject}
735 % outputs text on separate line in roman font, starting at standard page margin
737 % This records the amount of indent in the innermost environment.
738 % That's how much \exdent should take out.
739 \newskip\exdentamount
741 % This defn is used inside fill environments such as @defun.
742 \def\exdent{\parsearg\exdentyyy}
743 \def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
745 % This defn is used inside nofill environments such as @example.
746 \def\nofillexdent{\parsearg\nofillexdentyyy}
747 \def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
748 \leftline{\hskip\leftskip{\rm#1}}}}
750 % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
751 % paragraph. For more general purposes, use the \margin insertion
752 % class. WHICH is `l' or `r'.
754 \newskip\inmarginspacing \inmarginspacing=1cm
755 \def\strutdepth{\dp\strutbox}
757 \def\doinmargin#1#2{\strut\vadjust{%
760 \vtop to \strutdepth{%
761 \baselineskip=\strutdepth
763 % if you have multiple lines of stuff to put here, you'll need to
764 % make the vbox yourself of the appropriate size.
766 \llap{\ignorespaces #2\hskip\inmarginspacing}%
768 \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
773 \def\inleftmargin{\doinmargin l}
774 \def\inrightmargin{\doinmargin r}
776 % @inmargin{TEXT [, RIGHT-TEXT]}
777 % (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
778 % else use TEXT for both).
780 \def\inmargin#1{\parseinmargin #1,,\finish}
781 \def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
782 \setbox0 = \hbox{\ignorespaces #2}%
784 \def\lefttext{#1}% have both texts
787 \def\lefttext{#1}% have only one text
792 \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
794 \def\temp{\inleftmargin\lefttext}%
799 % @include file insert text of that file as input.
800 % Allow normal characters that we make active in the argument (a file name).
801 \def\include{\begingroup
810 \parsearg\includezzz}
811 % Restore active chars for included file.
812 \def\includezzz#1{\endgroup\begingroup
813 % Read the included file in a group so nested @include's work.
815 \let\value=\expandablevalue
822 % outputs that line, centered.
824 \def\center{\parsearg\docenter}
826 \ifhmode \hfil\break \fi
827 \advance\hsize by -\leftskip
828 \advance\hsize by -\rightskip
829 \line{\hfil \ignorespaces#1\unskip \hfil}%
833 % @sp n outputs n lines of vertical space
835 \def\sp{\parsearg\spxxx}
836 \def\spxxx #1{\vskip #1\baselineskip}
838 % @comment ...line which is ignored...
839 % @c is the same as @comment
840 % @ignore ... @end ignore is another way to write a comment
842 \def\comment{\begingroup \catcode`\^^M=\other%
843 \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
845 {\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
849 % @paragraphindent NCHARS
850 % We'll use ems for NCHARS, close enough.
851 % NCHARS can also be the word `asis' or `none'.
852 % We cannot feasibly implement @paragraphindent asis, though.
854 \def\asisword{asis} % no translation, these are keywords
857 \def\paragraphindent{\parsearg\doparagraphindent}
858 \def\doparagraphindent#1{%
863 \defaultparindent = 0pt
865 \defaultparindent = #1em
868 \parindent = \defaultparindent
871 % @exampleindent NCHARS
872 % We'll use ems for NCHARS like @paragraphindent.
873 % It seems @exampleindent asis isn't necessary, but
874 % I preserve it to make it similar to @paragraphindent.
875 \def\exampleindent{\parsearg\doexampleindent}
876 \def\doexampleindent#1{%
883 \lispnarrowing = #1em
888 % @firstparagraphindent WORD
889 % If WORD is `none', then suppress indentation of the first paragraph
890 % after a section heading. If WORD is `insert', then do indent at such
893 % The paragraph indentation is suppressed or not by calling
894 % \suppressfirstparagraphindent, which the sectioning commands do.
895 % We switch the definition of this back and forth according to WORD.
896 % By default, we suppress indentation.
898 \def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
899 \newdimen\currentparindent
901 \def\insertword{insert}
903 \def\firstparagraphindent{\parsearg\dofirstparagraphindent}
904 \def\dofirstparagraphindent#1{%
907 \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
908 \else\ifx\temp\insertword
909 \let\suppressfirstparagraphindent = \relax
912 \errmessage{Unknown @firstparagraphindent option `\temp'}%
916 % Here is how we actually suppress indentation. Redefine \everypar to
917 % \kern backwards by \parindent, and then reset itself to empty.
919 % We also make \indent itself not actually do anything until the next
922 \gdef\dosuppressfirstparagraphindent{%
924 \global\let\indent=\ptexindent
925 \global\everypar = {}%
927 \global\everypar = {%
929 \global\let\indent=\ptexindent
930 \global\everypar = {}%
935 % @asis just yields its argument. Used with @table, for example.
939 % @math outputs its argument in math mode.
940 % We don't use $'s directly in the definition of \math because we need
941 % to set catcodes according to plain TeX first, to allow for subscripts,
942 % superscripts, special math chars, etc.
944 \let\implicitmath = $%$ font-lock fix
946 % One complication: _ usually means subscripts, but it could also mean
947 % an actual _ character, as in @math{@var{some_variable} + 1}. So make
948 % _ within @math be active (mathcode "8000), and distinguish by seeing
949 % if the current family is \slfam, which is what @var uses.
951 {\catcode\underChar = \active
952 \gdef\mathunderscore{%
953 \catcode\underChar=\active
954 \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
957 % Another complication: we want \\ (and @\) to output a \ character.
958 % FYI, plain.tex uses \\ as a temporary control sequence (why?), but
959 % this is not advertised and we don't care. Texinfo does not
960 % otherwise define @\.
962 % The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
963 \def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
967 \mathcode`\_="8000 \mathunderscore
968 \let\\ = \mathbackslash
970 \implicitmath\finishmath}
971 \def\finishmath#1{#1\implicitmath\Etex}
973 % Some active characters (such as <) are spaced differently in math.
974 % We have to reset their definitions in case the @math was an
975 % argument to a command which set the catcodes (such as @item or @section).
990 % @bullet and @minus need the same treatment as @math, just above.
991 \def\bullet{\implicitmath\ptexbullet\implicitmath}
992 \def\minus{\implicitmath-\implicitmath}
994 % @refill is a no-op.
997 % If working on a large document in chapters, it is convenient to
998 % be able to disable indexing, cross-referencing, and contents, for test runs.
999 % This is done with @novalidate (before @setfilename).
1001 \newif\iflinks \linkstrue % by default we want the aux files.
1002 \let\novalidate = \linksfalse
1004 % @setfilename is done at the beginning of every texinfo file.
1005 % So open here the files we need to have open while reading the input.
1006 % This makes it possible to make a .fmt file for texinfo.
1010 \fi % \openindices needs to do some work in any case.
1012 \fixbackslash % Turn off hack to swallow `\input texinfo'.
1013 \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
1015 % If texinfo.cnf is present on the system, read it.
1016 % Useful for site-wide @afourpaper, etc.
1017 % Just to be on the safe side, close the input stream before the \input.
1018 \openin 1 texinfo.cnf
1019 \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
1023 \comment % Ignore the actual filename.
1026 % Called from \setfilename.
1038 \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
1042 % adobe `portable' document format
1046 \newcount\filenamelength
1055 \newif\ifpdfmakepagedest
1057 \ifx\pdfoutput\undefined
1059 \let\pdfmkdest = \gobble
1060 \let\pdfurl = \gobble
1061 \let\endlink = \relax
1062 \let\linkcolor = \relax
1063 \let\pdfmakeoutlines = \relax
1068 \def\dopdfimage#1#2#3{%
1069 \def\imagewidth{#2}%
1070 \def\imageheight{#3}%
1071 % without \immediate, pdftex seg faults when the same image is
1072 % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
1073 \ifnum\pdftexversion < 14
1076 \immediate\pdfximage
1078 \ifx\empty\imagewidth\else width \imagewidth \fi
1079 \ifx\empty\imageheight\else height \imageheight \fi
1080 \ifnum\pdftexversion<13
1085 \ifnum\pdftexversion < 14 \else
1086 \pdfrefximage \pdflastximage
1088 \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}}
1090 \let\linkcolor = \Blue % was Cyan, but that seems light?
1091 \def\endlink{\Black\pdfendlink}
1092 % Adding outlines to PDF; macros for calculating structure of outlines
1093 % come from Petr Olsak
1094 \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
1095 \else \csname#1\endcsname \fi}
1096 \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
1097 \advance\tempnum by1
1098 \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
1099 \def\pdfmakeoutlines{{%
1100 \openin 1 \jobname.toc
1101 \ifeof 1\else\begingroup
1103 % Thanh's hack / proper braces in bookmarks
1104 \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
1105 \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
1107 % Read toc first time in order to get the counts of subentries for
1109 \def\chapentry##1##2##3{}
1110 \def\secentry##1##2##3##4{\advancenumber{chap##2}}
1111 \def\subsecentry##1##2##3##4##5{\advancenumber{sec##2.##3}}
1112 \def\subsubsecentry##1##2##3##4##5##6{\advancenumber{subsec##2.##3.##4}}
1113 % use \def rather than \let here because we redefine \chapentry et
1114 % al. a second time, below.
1115 \def\appendixentry{\chapentry}
1116 \def\unnumbchapentry{\chapentry}
1117 \def\unnumbsecentry{\secentry}
1118 \def\unnumbsubsecentry{\subsecentry}
1119 \def\unnumbsubsubsecentry{\subsubsecentry}
1122 % Read toc second time, this time actually producing the outlines.
1123 % The `-' means take the \expnumber as the absolute number of
1124 % subentries, which we calculated on our first read of the .toc above.
1125 \def\chapentry##1##2##3{%
1126 \pdfoutline goto name{\pdfmkpgn{##3}}count-\expnumber{chap##2}{##1}}
1127 \def\secentry##1##2##3##4{%
1128 \pdfoutline goto name{\pdfmkpgn{##1}}count-\expnumber{sec##2.##3}{##1}}
1129 \def\subsecentry##1##2##3##4##5{%
1130 \pdfoutline goto name{\pdfmkpgn{##5}}count-\expnumber{subsec##2.##3.##4}{##1}}
1131 \def\subsubsecentry##1##2##3##4##5##6{%
1132 \pdfoutline goto name{\pdfmkpgn{##6}}{##1}}
1134 % Make special characters normal for writing to the pdf file.
1141 \def\makelinks #1,{%
1142 \def\params{#1}\def\E{END}%
1144 \let\nextmakelinks=\relax
1146 \let\nextmakelinks=\makelinks
1147 \ifnum\lnkcount>0,\fi
1149 \startlink attr{/Border [0 0 0]}
1150 goto name{\pdfmkpgn{\the\pgn}}%
1152 \advance\lnkcount by 1%
1157 \def\picknum#1{\expandafter\pn#1}
1168 \def\ppn#1{\pgn=#1\gobble}
1169 \def\ppnn{\pgn=\first}
1170 \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
1171 \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1172 \def\skipspaces#1{\def\PP{#1}\def\D{|}%
1173 \ifx\PP\D\let\nextsp\relax
1174 \else\let\nextsp\skipspaces
1175 \ifx\p\space\else\addtokens{\filename}{\PP}%
1176 \advance\filenamelength by 1
1180 \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
1181 \ifnum\pdftexversion < 14
1182 \let \startlink \pdfannotlink
1184 \let \startlink \pdfstartlink
1188 \normalturnoffactive\def\@{@}%
1189 \let\value=\expandablevalue
1191 \startlink attr{/Border [0 0 0]}%
1192 user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
1195 \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
1196 \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
1197 \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
1198 \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
1200 \expandafter\poptoks\the\toksA|ENDTOKS|
1202 \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
1203 \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
1204 \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
1206 \ifnum0=\countA\else\makelink\fi
1207 \ifx\first.\let\next=\done\else
1209 \addtokens{\toksB}{\the\toksD}
1210 \ifx\first,\addtokens{\toksB}{\space}\fi
1212 \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
1214 \def\makelink{\addtokens{\toksB}%
1215 {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
1217 \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
1218 \linkcolor #1\endlink}
1219 \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
1220 \fi % \ifx\pdfoutput
1224 % Font-change commands.
1226 % Texinfo sort of supports the sans serif font style, which plain TeX does not.
1227 % So we set up a \sf analogous to plain's \rm, etc.
1229 \def\sf{\fam=\sffam \tensf}
1230 \let\li = \sf % Sometimes we call it \li, not \sf.
1232 % We don't need math for this one.
1236 \newdimen\textleading \textleading = 13.2pt
1238 % Set the baselineskip to #1, and the lineskip and strut size
1239 % correspondingly. There is no deep meaning behind these magic numbers
1240 % used as factors; they just match (closely enough) what Knuth defined.
1242 \def\lineskipfactor{.08333}
1243 \def\strutheightpercent{.70833}
1244 \def\strutdepthpercent {.29167}
1247 \normalbaselineskip = #1\relax
1248 \normallineskip = \lineskipfactor\normalbaselineskip
1250 \setbox\strutbox =\hbox{%
1251 \vrule width0pt height\strutheightpercent\baselineskip
1252 depth \strutdepthpercent \baselineskip
1256 % Set the font macro #1 to the font named #2, adding on the
1257 % specified font prefix (normally `cm').
1258 % #3 is the font's design size, #4 is a scale factor
1259 \def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
1261 % Use cm as the default font prefix.
1262 % To specify the font prefix, you must define \fontprefix
1263 % before you read in texinfo.tex.
1264 \ifx\fontprefix\undefined
1267 % Support font families that don't use the same naming scheme as CM.
1269 \def\rmbshape{bx} %where the normal face is bold
1274 \def\ttslshape{sltt}
1284 \newcount\mainmagstep
1286 % not really supported.
1287 \mainmagstep=\magstep1
1288 \setfont\textrm\rmshape{12}{1000}
1289 \setfont\texttt\ttshape{12}{1000}
1291 \mainmagstep=\magstephalf
1292 \setfont\textrm\rmshape{10}{\mainmagstep}
1293 \setfont\texttt\ttshape{10}{\mainmagstep}
1295 % Instead of cmb10, you may want to use cmbx10.
1296 % cmbx10 is a prettier font on its own, but cmb10
1297 % looks better when embedded in a line with cmr10
1298 % (in Bob's opinion).
1299 \setfont\textbf\bfshape{10}{\mainmagstep}
1300 \setfont\textit\itshape{10}{\mainmagstep}
1301 \setfont\textsl\slshape{10}{\mainmagstep}
1302 \setfont\textsf\sfshape{10}{\mainmagstep}
1303 \setfont\textsc\scshape{10}{\mainmagstep}
1304 \setfont\textttsl\ttslshape{10}{\mainmagstep}
1305 \font\texti=cmmi10 scaled \mainmagstep
1306 \font\textsy=cmsy10 scaled \mainmagstep
1308 % A few fonts for @defun, etc.
1309 \setfont\defbf\bxshape{10}{\magstep1} %was 1314
1310 \setfont\deftt\ttshape{10}{\magstep1}
1311 \def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
1313 % Fonts for indices, footnotes, small examples (9pt).
1314 \setfont\smallrm\rmshape{9}{1000}
1315 \setfont\smalltt\ttshape{9}{1000}
1316 \setfont\smallbf\bfshape{10}{900}
1317 \setfont\smallit\itshape{9}{1000}
1318 \setfont\smallsl\slshape{9}{1000}
1319 \setfont\smallsf\sfshape{9}{1000}
1320 \setfont\smallsc\scshape{10}{900}
1321 \setfont\smallttsl\ttslshape{10}{900}
1325 % Fonts for small examples (8pt).
1326 \setfont\smallerrm\rmshape{8}{1000}
1327 \setfont\smallertt\ttshape{8}{1000}
1328 \setfont\smallerbf\bfshape{10}{800}
1329 \setfont\smallerit\itshape{8}{1000}
1330 \setfont\smallersl\slshape{8}{1000}
1331 \setfont\smallersf\sfshape{8}{1000}
1332 \setfont\smallersc\scshape{10}{800}
1333 \setfont\smallerttsl\ttslshape{10}{800}
1334 \font\smalleri=cmmi8
1335 \font\smallersy=cmsy8
1337 % Fonts for title page:
1338 \setfont\titlerm\rmbshape{12}{\magstep3}
1339 \setfont\titleit\itbshape{10}{\magstep4}
1340 \setfont\titlesl\slbshape{10}{\magstep4}
1341 \setfont\titlett\ttbshape{12}{\magstep3}
1342 \setfont\titlettsl\ttslshape{10}{\magstep4}
1343 \setfont\titlesf\sfbshape{17}{\magstep1}
1344 \let\titlebf=\titlerm
1345 \setfont\titlesc\scbshape{10}{\magstep4}
1346 \font\titlei=cmmi12 scaled \magstep3
1347 \font\titlesy=cmsy10 scaled \magstep4
1348 \def\authorrm{\secrm}
1349 \def\authortt{\sectt}
1351 % Chapter (and unnumbered) fonts (17.28pt).
1352 \setfont\chaprm\rmbshape{12}{\magstep2}
1353 \setfont\chapit\itbshape{10}{\magstep3}
1354 \setfont\chapsl\slbshape{10}{\magstep3}
1355 \setfont\chaptt\ttbshape{12}{\magstep2}
1356 \setfont\chapttsl\ttslshape{10}{\magstep3}
1357 \setfont\chapsf\sfbshape{17}{1000}
1359 \setfont\chapsc\scbshape{10}{\magstep3}
1360 \font\chapi=cmmi12 scaled \magstep2
1361 \font\chapsy=cmsy10 scaled \magstep3
1363 % Section fonts (14.4pt).
1364 \setfont\secrm\rmbshape{12}{\magstep1}
1365 \setfont\secit\itbshape{10}{\magstep2}
1366 \setfont\secsl\slbshape{10}{\magstep2}
1367 \setfont\sectt\ttbshape{12}{\magstep1}
1368 \setfont\secttsl\ttslshape{10}{\magstep2}
1369 \setfont\secsf\sfbshape{12}{\magstep1}
1371 \setfont\secsc\scbshape{10}{\magstep2}
1372 \font\seci=cmmi12 scaled \magstep1
1373 \font\secsy=cmsy10 scaled \magstep2
1375 % Subsection fonts (13.15pt).
1376 \setfont\ssecrm\rmbshape{12}{\magstephalf}
1377 \setfont\ssecit\itbshape{10}{1315}
1378 \setfont\ssecsl\slbshape{10}{1315}
1379 \setfont\ssectt\ttbshape{12}{\magstephalf}
1380 \setfont\ssecttsl\ttslshape{10}{1315}
1381 \setfont\ssecsf\sfbshape{12}{\magstephalf}
1383 \setfont\ssecsc\scbshape{10}{\magstep1}
1384 \font\sseci=cmmi12 scaled \magstephalf
1385 \font\ssecsy=cmsy10 scaled 1315
1386 % The smallcaps and symbol fonts should actually be scaled \magstep1.5,
1387 % but that is not a standard magnification.
1389 % In order for the font changes to affect most math symbols and letters,
1390 % we have to define the \textfont of the standard families. Since
1391 % texinfo doesn't allow for producing subscripts and superscripts except
1392 % in the main text, we don't bother to reset \scriptfont and
1393 % \scriptscriptfont (which would also require loading a lot more fonts).
1395 \def\resetmathfonts{%
1396 \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
1397 \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
1398 \textfont\ttfam=\tentt \textfont\sffam=\tensf
1401 % The font-changing commands redefine the meanings of \tenSTYLE, instead
1402 % of just \STYLE. We do this so that font changes will continue to work
1403 % in math mode, where it is the current \fam that is relevant in most
1404 % cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
1405 % \tenbf}, for example. By redefining \tenbf, we obviate the need to
1406 % redefine \bf itself.
1408 \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
1409 \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
1410 \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
1411 \resetmathfonts \setleading{\textleading}}
1413 \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
1414 \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
1415 \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
1416 \let\tenttsl=\titlettsl
1417 \resetmathfonts \setleading{25pt}}
1418 \def\titlefont#1{{\titlefonts\rm #1}}
1420 \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
1421 \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
1422 \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
1423 \resetmathfonts \setleading{19pt}}
1425 \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
1426 \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
1427 \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
1428 \resetmathfonts \setleading{16pt}}
1430 \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
1431 \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
1432 \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
1433 \resetmathfonts \setleading{15pt}}
1434 \let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
1436 \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
1437 \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
1438 \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
1439 \let\tenttsl=\smallttsl
1440 \resetmathfonts \setleading{10.5pt}}
1442 \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
1443 \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
1444 \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
1445 \let\tenttsl=\smallerttsl
1446 \resetmathfonts \setleading{9.5pt}}
1448 % Set the fonts to use with the @small... environments.
1449 \let\smallexamplefonts = \smallfonts
1451 % About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
1452 % can fit this many characters:
1453 % 8.5x11=86 smallbook=72 a4=90 a5=69
1454 % If we use \smallerfonts (8pt), then we can fit this many characters:
1455 % 8.5x11=90+ smallbook=80 a4=90+ a5=77
1456 % For me, subjectively, the few extra characters that fit aren't worth
1457 % the additional smallness of 8pt. So I'm making the default 9pt.
1459 % By the way, for comparison, here's what fits with @example (10pt):
1460 % 8.5x11=71 smallbook=60 a4=75 a5=58
1462 % I wish we used A4 paper on this side of the Atlantic.
1467 % Set up the default fonts, so we can use them for creating boxes.
1471 % Define these so they can be easily changed for other fonts.
1472 \def\angleleft{$\langle$}
1473 \def\angleright{$\rangle$}
1475 % Count depth in font-changes, for error checks
1476 \newcount\fontdepth \fontdepth=0
1478 % Fonts for short table of contents.
1479 \setfont\shortcontrm\rmshape{12}{1000}
1480 \setfont\shortcontbf\bxshape{12}{1000}
1481 \setfont\shortcontsl\slshape{12}{1000}
1482 \setfont\shortconttt\ttshape{12}{1000}
1484 %% Add scribe-like font environments, plus @l for inline lisp (usually sans
1485 %% serif) and @ii for TeX italic
1487 % \smartitalic{ARG} outputs arg in italics, followed by an italic correction
1488 % unless the following character is such as not to need one.
1489 \def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
1490 \ptexslash\fi\fi\fi}
1491 \def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
1492 \def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
1495 \let\var=\smartslanted
1496 \let\dfn=\smartslanted
1497 \let\emph=\smartitalic
1498 \let\cite=\smartslanted
1503 % We can't just use \exhyphenpenalty, because that only has effect at
1504 % the end of a paragraph. Restore normal hyphenation at the end of the
1505 % group within which \nohyphenation is presumably called.
1507 \def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
1508 \def\restorehyphenation{\hyphenchar\font = `- }
1510 % Set sfcode to normal for the chars that usually have another value.
1511 % Can't use plain's \frenchspacing because it uses the `\x notation, and
1512 % sometimes \x has an active definition that messes things up.
1515 \def\frenchspacing{%
1516 \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
1517 \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
1522 {\tt \rawbackslash \frenchspacing #1}%
1526 \def\samp#1{`\tclose{#1}'\null}
1527 \setfont\keyrm\rmshape{8}{1000}
1529 \def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
1530 \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
1531 \vbox{\hrule\kern-0.4pt
1532 \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
1534 \kern-.06em\raise0.4pt\hbox{\angleright}}}}
1535 % The old definition, with no lozenge:
1536 %\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
1537 \def\ctrl #1{{\tt \rawbackslash \hat}#1}
1539 % @file, @option are the same as @samp.
1543 % @code is a modification of @t,
1544 % which makes spaces the same size as normal in the surrounding text.
1547 % Change normal interword space to be same as for the current font.
1548 \spaceskip = \fontdimen2\font
1550 % Switch to typewriter.
1553 % But `\ ' produces the large typewriter interword space.
1554 \def\ {{\spaceskip = 0pt{} }}%
1556 % Turn off hyphenation.
1566 % We *must* turn on hyphenation at `-' and `_' in \code.
1567 % Otherwise, it is too hard to avoid overfull hboxes
1568 % in the Emacs manual, the Library manual, etc.
1570 % Unfortunately, TeX uses one parameter (\hyphenchar) to control
1571 % both hyphenation at - and hyphenation within words.
1572 % We must therefore turn them both off (\tclose does that)
1573 % and arrange explicitly to hyphenate at a dash.
1579 \global\def\code{\begingroup
1580 \catcode`\-=\active \let-\codedash
1581 \catcode`\_=\active \let_\codeunder
1585 % If we end up with any active - characters when handling the index,
1586 % just treat them as a normal -.
1587 \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
1591 \def\codedash{-\discretionary{}{}{}}
1593 % this is all so @math{@code{var_name}+1} can work. In math mode, _
1594 % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
1595 % will therefore expand the active definition of _, which is us
1596 % (inside @code that is), therefore an endless loop.
1598 \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
1599 \else\normalunderscore \fi
1600 \discretionary{}{}{}}%
1603 \def\codex #1{\tclose{#1}\endgroup}
1605 % @kbd is like @code, except that if the argument is just one @key command,
1606 % then @kbd has no effect.
1608 % @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
1609 % `example' (@kbd uses ttsl only inside of @example and friends),
1610 % or `code' (@kbd uses normal tty font always).
1611 \def\kbdinputstyle{\parsearg\kbdinputstylexxx}
1612 \def\kbdinputstylexxx#1{%
1614 \ifx\arg\worddistinct
1615 \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
1616 \else\ifx\arg\wordexample
1617 \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
1618 \else\ifx\arg\wordcode
1619 \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
1621 \errhelp = \EMsimple
1622 \errmessage{Unknown @kbdinputstyle option `\arg'}%
1625 \def\worddistinct{distinct}
1626 \def\wordexample{example}
1629 % Default is `distinct.'
1630 \kbdinputstyle distinct
1633 \def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
1634 \ifx\one\xkey\ifx\threex\three \key{#2}%
1635 \else{\tclose{\kbdfont\look}}\fi
1636 \else{\tclose{\kbdfont\look}}\fi}
1638 % For @url, @env, @command quotes seem unnecessary, so use \code.
1643 % @uref (abbreviation for `urlref') takes an optional (comma-separated)
1644 % second argument specifying the text to display and an optional third
1645 % arg as text to display instead of (rather than in addition to) the url
1646 % itself. First (mandatory) arg is the url. Perhaps eventually put in
1647 % a hypertex \special here.
1649 \def\uref#1{\douref #1,,,\finish}
1650 \def\douref#1,#2,#3,#4\finish{\begingroup
1653 \setbox0 = \hbox{\ignorespaces #3}%
1655 \unhbox0 % third arg given, show only that
1657 \setbox0 = \hbox{\ignorespaces #2}%
1660 \unhbox0 % PDF: 2nd arg given, show only it
1662 \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
1665 \code{#1}% only url given, so show it
1671 % rms does not like angle brackets --karl, 17may97.
1672 % So now @email is just like @uref, unless we are pdf.
1674 %\def\email#1{\angleleft{\tt #1}\angleright}
1676 \def\email#1{\doemail#1,,\finish}
1677 \def\doemail#1,#2,#3\finish{\begingroup
1680 \setbox0 = \hbox{\ignorespaces #2}%
1681 \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
1688 % Check if we are currently using a typewriter font. Since all the
1689 % Computer Modern typewriter fonts have zero interword stretch (and
1690 % shrink), and it is reasonable to expect all typewriter fonts to have
1691 % this property, we can check that font parameter.
1693 \def\ifmonospace{\ifdim\fontdimen3\font=0pt }
1695 % Typeset a dimension, e.g., `in' or `pt'. The only reason for the
1696 % argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
1698 \def\dmn#1{\thinspace #1}
1700 \def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
1702 % @l was never documented to mean ``switch to the Lisp font'',
1703 % and it is not used as such in any manual I can find. We need it for
1704 % Polish suppressed-l. --karl, 22sep96.
1705 %\def\l#1{{\li #1}\null}
1707 % Explicit font changes: @r, @sc, undocumented @ii.
1708 \def\r#1{{\rm #1}} % roman font
1709 \def\sc#1{{\smallcaps#1}} % smallcaps font
1710 \def\ii#1{{\it #1}} % italic font
1712 % @acronym downcases the argument and prints in smallcaps.
1713 \def\acronym#1{{\smallcaps \lowercase{#1}}}
1715 % @pounds{} is a sterling sign.
1716 \def\pounds{{\it\$}}
1718 % @registeredsymbol - R in a circle. For now, only works in text size;
1719 % we'd have to redo the font mechanism to change the \scriptstyle and
1720 % \scriptscriptstyle font sizes to make it look right in headings.
1721 % Adapted from the plain.tex definition of \copyright.
1723 \def\registeredsymbol{%
1724 $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}%
1729 \message{page headings,}
1731 \newskip\titlepagetopglue \titlepagetopglue = 1.5in
1732 \newskip\titlepagebottomglue \titlepagebottomglue = 2pc
1734 % First the title page. Must do @settitle before @titlepage.
1736 \newif\iffinishedtitlepage
1738 % Do an implicit @contents or @shortcontents after @end titlepage if the
1739 % user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
1741 \newif\ifsetcontentsaftertitlepage
1742 \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
1743 \newif\ifsetshortcontentsaftertitlepage
1744 \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
1746 \def\shorttitlepage{\parsearg\shorttitlepagezzz}
1747 \def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
1748 \endgroup\page\hbox{}\page}
1750 \def\titlepage{\begingroup \parindent=0pt \textfonts
1751 \let\subtitlerm=\tenrm
1752 \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
1754 \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
1757 % Leave some space at the very top of the page.
1758 \vglue\titlepagetopglue
1760 % Now you can print the title using @title.
1761 \def\title{\parsearg\titlezzz}%
1762 \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
1763 % print a rule at the page bottom also.
1764 \finishedtitlepagefalse
1765 \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
1766 % No rule at page bottom unless we print one at the top with @title.
1767 \finishedtitlepagetrue
1769 % Now you can put text using @subtitle.
1770 \def\subtitle{\parsearg\subtitlezzz}%
1771 \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
1773 % @author should come last, but may come many times.
1774 \def\author{\parsearg\authorzzz}%
1775 \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
1776 {\authorfont \leftline{##1}}}%
1778 % Most title ``pages'' are actually two pages long, with space
1779 % at the top of the second. We don't want the ragged left on the second.
1780 \let\oldpage = \page
1782 \iffinishedtitlepage\else
1786 \let\page = \oldpage
1788 % \def\page{\oldpage \hbox{}}
1792 \iffinishedtitlepage\else
1795 % It is important to do the page break before ending the group,
1796 % because the headline and footline are only empty inside the group.
1797 % If we use the new definition of \page, we always get a blank page
1798 % after the title page, which we certainly don't want.
1802 % Need this before the \...aftertitlepage checks so that if they are
1803 % in effect the toc pages will come out with page numbers.
1806 % If they want short, they certainly want long too.
1807 \ifsetshortcontentsaftertitlepage
1810 \global\let\shortcontents = \relax
1811 \global\let\contents = \relax
1814 \ifsetcontentsaftertitlepage
1816 \global\let\contents = \relax
1817 \global\let\shortcontents = \relax
1821 \def\finishtitlepage{%
1822 \vskip4pt \hrule height 2pt width \hsize
1823 \vskip\titlepagebottomglue
1824 \finishedtitlepagetrue
1827 %%% Set up page headings and footings.
1829 \let\thispage=\folio
1831 \newtoks\evenheadline % headline on even pages
1832 \newtoks\oddheadline % headline on odd pages
1833 \newtoks\evenfootline % footline on even pages
1834 \newtoks\oddfootline % footline on odd pages
1836 % Now make Tex use those variables
1837 \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
1838 \else \the\evenheadline \fi}}
1839 \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
1840 \else \the\evenfootline \fi}\HEADINGShook}
1841 \let\HEADINGShook=\relax
1843 % Commands to set those variables.
1844 % For example, this is what @headings on does
1845 % @evenheading @thistitle|@thispage|@thischapter
1846 % @oddheading @thischapter|@thispage|@thistitle
1847 % @evenfooting @thisfile||
1848 % @oddfooting ||@thisfile
1850 \def\evenheading{\parsearg\evenheadingxxx}
1851 \def\oddheading{\parsearg\oddheadingxxx}
1852 \def\everyheading{\parsearg\everyheadingxxx}
1854 \def\evenfooting{\parsearg\evenfootingxxx}
1855 \def\oddfooting{\parsearg\oddfootingxxx}
1856 \def\everyfooting{\parsearg\everyfootingxxx}
1860 \gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
1861 \gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
1862 \global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1864 \gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
1865 \gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
1866 \global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1868 \gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
1870 \gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
1871 \gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
1872 \global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
1874 \gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
1875 \gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
1876 \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
1878 % Leave some space for the footline. Hopefully ok to assume
1879 % @evenfooting will not be used by itself.
1880 \global\advance\pageheight by -\baselineskip
1881 \global\advance\vsize by -\baselineskip
1884 \gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
1886 }% unbind the catcode of @.
1888 % @headings double turns headings on for double-sided printing.
1889 % @headings single turns headings on for single-sided printing.
1890 % @headings off turns them off.
1891 % @headings on same as @headings double, retained for compatibility.
1892 % @headings after turns on double-sided headings after this page.
1893 % @headings doubleafter turns on double-sided headings after this page.
1894 % @headings singleafter turns on single-sided headings after this page.
1895 % By default, they are off at the start of a document,
1896 % and turned `on' after @end titlepage.
1898 \def\headings #1 {\csname HEADINGS#1\endcsname}
1901 \global\evenheadline={\hfil} \global\evenfootline={\hfil}
1902 \global\oddheadline={\hfil} \global\oddfootline={\hfil}}
1904 % When we turn headings on, set the page number to 1.
1905 % For double-sided printing, put current file name in lower left corner,
1906 % chapter name on inside top of right hand pages, document
1907 % title on inside top of left hand pages, and page numbers on outside top
1908 % edge of all pages.
1909 \def\HEADINGSdouble{
1911 \global\evenfootline={\hfil}
1912 \global\oddfootline={\hfil}
1913 \global\evenheadline={\line{\folio\hfil\thistitle}}
1914 \global\oddheadline={\line{\thischapter\hfil\folio}}
1915 \global\let\contentsalignmacro = \chapoddpage
1917 \let\contentsalignmacro = \chappager
1919 % For single-sided printing, chapter title goes across top left of page,
1920 % page number on top right.
1921 \def\HEADINGSsingle{
1923 \global\evenfootline={\hfil}
1924 \global\oddfootline={\hfil}
1925 \global\evenheadline={\line{\thischapter\hfil\folio}}
1926 \global\oddheadline={\line{\thischapter\hfil\folio}}
1927 \global\let\contentsalignmacro = \chappager
1929 \def\HEADINGSon{\HEADINGSdouble}
1931 \def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
1932 \let\HEADINGSdoubleafter=\HEADINGSafter
1933 \def\HEADINGSdoublex{%
1934 \global\evenfootline={\hfil}
1935 \global\oddfootline={\hfil}
1936 \global\evenheadline={\line{\folio\hfil\thistitle}}
1937 \global\oddheadline={\line{\thischapter\hfil\folio}}
1938 \global\let\contentsalignmacro = \chapoddpage
1941 \def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
1942 \def\HEADINGSsinglex{%
1943 \global\evenfootline={\hfil}
1944 \global\oddfootline={\hfil}
1945 \global\evenheadline={\line{\thischapter\hfil\folio}}
1946 \global\oddheadline={\line{\thischapter\hfil\folio}}
1947 \global\let\contentsalignmacro = \chappager
1950 % Subroutines used in generating headings
1951 % This produces Day Month Year style of output.
1952 % Only define if not already defined, in case a txi-??.tex file has set
1953 % up a different format (e.g., txi-cs.tex does this).
1954 \ifx\today\undefined
1958 \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
1959 \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
1960 \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
1965 % @settitle line... specifies the title of the document, for headings.
1966 % It generates no output of its own.
1967 \def\thistitle{\putwordNoTitle}
1968 \def\settitle{\parsearg\settitlezzz}
1969 \def\settitlezzz #1{\gdef\thistitle{#1}}
1973 % Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
1975 % default indentation of table text
1976 \newdimen\tableindent \tableindent=.8in
1977 % default indentation of @itemize and @enumerate text
1978 \newdimen\itemindent \itemindent=.3in
1979 % margin between end of table item and start of table text.
1980 \newdimen\itemmargin \itemmargin=.1in
1982 % used internally for \itemindent minus \itemmargin
1985 % Note @table, @vtable, and @vtable define @item, @itemx, etc., with
1987 % They also define \itemindex
1988 % to index the item name in whatever manner is desired (perhaps none).
1990 \newif\ifitemxneedsnegativevskip
1992 \def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
1994 \def\internalBitem{\smallbreak \parsearg\itemzzz}
1995 \def\internalBitemx{\itemxpar \parsearg\itemzzz}
1997 \def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
1998 \def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
2000 \def\internalBkitem{\smallbreak \parsearg\kitemzzz}
2001 \def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
2003 \def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
2006 \def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
2009 \def\itemzzz #1{\begingroup %
2010 \advance\hsize by -\rightskip
2011 \advance\hsize by -\tableindent
2012 \setbox0=\hbox{\itemfont{#1}}%
2014 \nobreak % This prevents a break before @itemx.
2016 % If the item text does not fit in the space we have, put it on a line
2017 % by itself, and do not allow a page break either before or after that
2018 % line. We do not start a paragraph here because then if the next
2019 % command is, e.g., @kindex, the whatsit would get put into the
2020 % horizontal list on a line by itself, resulting in extra blank space.
2021 \ifdim \wd0>\itemmax
2023 % Make this a paragraph so we get the \parskip glue and wrapping,
2024 % but leave it ragged-right.
2026 \advance\leftskip by-\tableindent
2027 \advance\hsize by\tableindent
2028 \advance\rightskip by0pt plus1fil
2029 \leavevmode\unhbox0\par
2032 % We're going to be starting a paragraph, but we don't want the
2033 % \parskip glue -- logically it's part of the @item we just started.
2034 \nobreak \vskip-\parskip
2036 % Stop a page break at the \parskip glue coming up. (Unfortunately
2037 % we can't prevent a possible page break at the following
2038 % \baselineskip glue.) However, if what follows is an environment
2039 % such as @example, there will be no \parskip glue; then
2040 % the negative vskip we just would cause the example and the item to
2041 % crash together. So we use this bizarre value of 10001 as a signal
2042 % to \aboveenvbreak to insert \parskip glue after all.
2043 % (Possibly there are other commands that could be followed by
2044 % @example which need the same treatment, but not section titles; or
2045 % maybe section titles are the only special case and they should be
2049 \itemxneedsnegativevskipfalse
2051 % The item text fits into the space. Start a paragraph, so that the
2052 % following text (if any) will end up on the same line.
2054 % Do this with kerns and \unhbox so that if there is a footnote in
2055 % the item text, it can migrate to the main vertical list and
2056 % eventually be printed.
2057 \nobreak\kern-\tableindent
2058 \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
2060 \nobreak\kern\dimen0
2062 \itemxneedsnegativevskiptrue
2066 \def\item{\errmessage{@item while not in a table}}
2067 \def\itemx{\errmessage{@itemx while not in a table}}
2068 \def\kitem{\errmessage{@kitem while not in a table}}
2069 \def\kitemx{\errmessage{@kitemx while not in a table}}
2070 \def\xitem{\errmessage{@xitem while not in a table}}
2071 \def\xitemx{\errmessage{@xitemx while not in a table}}
2073 % Contains a kludge to get @end[description] to work.
2074 \def\description{\tablez{\dontindex}{1}{}{}{}{}}
2076 % @table, @ftable, @vtable.
2077 \def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
2078 {\obeylines\obeyspaces%
2079 \gdef\tablex #1^^M{%
2080 \tabley\dontindex#1 \endtabley}}
2082 \def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
2083 {\obeylines\obeyspaces%
2084 \gdef\ftablex #1^^M{%
2085 \tabley\fnitemindex#1 \endtabley
2086 \def\Eftable{\endgraf\afterenvbreak\endgroup}%
2087 \let\Etable=\relax}}
2089 \def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
2090 {\obeylines\obeyspaces%
2091 \gdef\vtablex #1^^M{%
2092 \tabley\vritemindex#1 \endtabley
2093 \def\Evtable{\endgraf\afterenvbreak\endgroup}%
2094 \let\Etable=\relax}}
2097 \def\fnitemindex #1{\doind {fn}{\code{#1}}}%
2098 \def\vritemindex #1{\doind {vr}{\code{#1}}}%
2101 \gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
2102 \tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
2104 \def\tablez #1#2#3#4#5#6{%
2107 \def\Edescription{\Etable}% Necessary kludge.
2109 \ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
2110 \ifnum 0#4>0 \tableindent=#4\mil \fi %
2111 \ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
2113 \itemmax=\tableindent %
2114 \advance \itemmax by -\itemmargin %
2115 \advance \leftskip by \tableindent %
2116 \exdentamount=\tableindent
2118 \parskip = \smallskipamount
2119 \ifdim \parskip=0pt \parskip=2pt \fi%
2120 \def\Etable{\endgraf\afterenvbreak\endgroup}%
2121 \let\item = \internalBitem %
2122 \let\itemx = \internalBitemx %
2123 \let\kitem = \internalBkitem %
2124 \let\kitemx = \internalBkitemx %
2125 \let\xitem = \internalBxitem %
2126 \let\xitemx = \internalBxitemx %
2129 % This is the counter used by @enumerate, which is really @itemize
2133 \def\itemize{\parsearg\itemizezzz}
2135 \def\itemizezzz #1{%
2136 \begingroup % ended by the @end itemize
2137 \itemizey {#1}{\Eitemize}
2142 \itemmax=\itemindent
2143 \advance\itemmax by -\itemmargin
2144 \advance\leftskip by \itemindent
2145 \exdentamount=\itemindent
2147 \parskip=\smallskipamount
2148 \ifdim\parskip=0pt \parskip=2pt \fi
2149 \def#2{\endgraf\afterenvbreak\endgroup}%
2150 \def\itemcontents{#1}%
2151 % @itemize with no arg is equivalent to @itemize @bullet.
2152 \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
2153 \let\item=\itemizeitem
2156 % \splitoff TOKENS\endmark defines \first to be the first token in
2157 % TOKENS, and \rest to be the remainder.
2159 \def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
2161 % Allow an optional argument of an uppercase letter, lowercase letter,
2162 % or number, to specify the first label in the enumerated list. No
2163 % argument is the same as `1'.
2165 \def\enumerate{\parsearg\enumeratezzz}
2166 \def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
2167 \def\enumeratey #1 #2\endenumeratey{%
2168 \begingroup % ended by the @end enumerate
2170 % If we were given no argument, pretend we were given `1'.
2172 \ifx\thearg\empty \def\thearg{1}\fi
2174 % Detect if the argument is a single token. If so, it might be a
2175 % letter. Otherwise, the only valid thing it can be is a number.
2176 % (We will always have one token, because of the test we just made.
2177 % This is a good thing, since \splitoff doesn't work given nothing at
2178 % all -- the first parameter is undelimited.)
2179 \expandafter\splitoff\thearg\endmark
2181 % Only one token in the argument. It could still be anything.
2182 % A ``lowercase letter'' is one whose \lccode is nonzero.
2183 % An ``uppercase letter'' is one whose \lccode is both nonzero, and
2184 % not equal to itself.
2185 % Otherwise, we assume it's a number.
2187 % We need the \relax at the end of the \ifnum lines to stop TeX from
2188 % continuing to look for a <number>.
2190 \ifnum\lccode\expandafter`\thearg=0\relax
2191 \numericenumerate % a number (we hope)
2194 \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
2195 \lowercaseenumerate % lowercase letter
2197 \uppercaseenumerate % uppercase letter
2201 % Multiple tokens in the argument. We hope it's a number.
2206 % An @enumerate whose labels are integers. The starting integer is
2209 \def\numericenumerate{%
2211 \startenumeration{\the\itemno}%
2214 % The starting (lowercase) letter is in \thearg.
2215 \def\lowercaseenumerate{%
2216 \itemno = \expandafter`\thearg
2218 % Be sure we're not beyond the end of the alphabet.
2220 \errmessage{No more lowercase letters in @enumerate; get a bigger
2227 % The starting (uppercase) letter is in \thearg.
2228 \def\uppercaseenumerate{%
2229 \itemno = \expandafter`\thearg
2231 % Be sure we're not beyond the end of the alphabet.
2233 \errmessage{No more uppercase letters in @enumerate; get a bigger
2240 % Call itemizey, adding a period to the first argument and supplying the
2241 % common last two arguments. Also subtract one from the initial value in
2242 % \itemno, since @item increments \itemno.
2244 \def\startenumeration#1{%
2245 \advance\itemno by -1
2246 \itemizey{#1.}\Eenumerate\flushcr
2249 % @alphaenumerate and @capsenumerate are abbreviations for giving an arg
2252 \def\alphaenumerate{\enumerate{a}}
2253 \def\capsenumerate{\enumerate{A}}
2254 \def\Ealphaenumerate{\Eenumerate}
2255 \def\Ecapsenumerate{\Eenumerate}
2257 % Definition of @item while inside @itemize.
2260 \advance\itemno by 1
2261 {\let\par=\endgraf \smallbreak}%
2262 \ifhmode \errmessage{In hmode at itemizeitem}\fi
2263 {\parskip=0in \hskip 0pt
2264 \hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
2265 \vadjust{\penalty 1200}}%
2268 % @multitable macros
2269 % Amy Hendrickson, 8/18/94, 3/6/96
2271 % @multitable ... @end multitable will make as many columns as desired.
2272 % Contents of each column will wrap at width given in preamble. Width
2273 % can be specified either with sample text given in a template line,
2274 % or in percent of \hsize, the current width of text on page.
2276 % Table can continue over pages but will only break between lines.
2280 % Either define widths of columns in terms of percent of \hsize:
2281 % @multitable @columnfractions .25 .3 .45
2284 % Numbers following @columnfractions are the percent of the total
2285 % current hsize to be used for each column. You may use as many
2286 % columns as desired.
2289 % Or use a template:
2290 % @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2292 % using the widest term desired in each column.
2294 % For those who want to use more than one line's worth of words in
2295 % the preamble, break the line within one argument and it
2296 % will parse correctly, i.e.,
2298 % @multitable {Column 1 template} {Column 2 template} {Column 3
2301 % @multitable {Column 1 template} {Column 2 template}
2302 % {Column 3 template}
2304 % Each new table line starts with @item, each subsequent new column
2305 % starts with @tab. Empty columns may be produced by supplying @tab's
2306 % with nothing between them for as many times as empty columns are needed,
2307 % ie, @tab@tab@tab will produce two empty columns.
2309 % @item, @tab, @multitable or @end multitable do not need to be on their
2310 % own lines, but it will not hurt if they are.
2312 % Sample multitable:
2314 % @multitable {Column 1 template} {Column 2 template} {Column 3 template}
2315 % @item first col stuff @tab second col stuff @tab third col
2322 % @item first col stuff @tab second col stuff
2323 % @tab Many paragraphs of text may be used in any column.
2325 % They will wrap at the width determined by the template.
2326 % @item@tab@tab This will be in third column.
2329 % Default dimensions may be reset by user.
2330 % @multitableparskip is vertical space between paragraphs in table.
2331 % @multitableparindent is paragraph indent in table.
2332 % @multitablecolmargin is horizontal space to be left between columns.
2333 % @multitablelinespace is space to leave between table items, baseline
2335 % 0pt means it depends on current normal line spacing.
2337 \newskip\multitableparskip
2338 \newskip\multitableparindent
2339 \newdimen\multitablecolspace
2340 \newskip\multitablelinespace
2341 \multitableparskip=0pt
2342 \multitableparindent=6pt
2343 \multitablecolspace=12pt
2344 \multitablelinespace=0pt
2346 % Macros used to set up halign preamble:
2348 \let\endsetuptable\relax
2349 \def\xendsetuptable{\endsetuptable}
2350 \let\columnfractions\relax
2351 \def\xcolumnfractions{\columnfractions}
2354 % #1 is the part of the @columnfraction before the decimal point, which
2355 % is presumably either 0 or the empty string (but we don't check, we
2356 % just throw it away). #2 is the decimal part, which we use as the
2357 % percent of \hsize for this column.
2358 \def\pickupwholefraction#1.#2 {%
2359 \global\advance\colcount by 1
2360 \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
2367 \ifx\firstarg\xendsetuptable
2370 \ifx\firstarg\xcolumnfractions
2371 \global\setpercenttrue
2374 \let\go\pickupwholefraction
2376 \global\advance\colcount by 1
2377 \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
2378 % separator; typically that is always in the input, anyway.
2379 \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
2382 \ifx\go\pickupwholefraction
2383 % Put the argument back for the \pickupwholefraction call, so
2384 % we'll always have a period there to be parsed.
2385 \def\go{\pickupwholefraction#1}%
2387 \let\go = \setuptable
2393 % @multitable ... @end multitable definitions:
2395 \def\multitable{\parsearg\dotable}
2396 \def\dotable#1{\bgroup
2398 \let\item=\crcrwithfootnotes
2399 % A \tab used to include \hskip1sp. But then the space in a template
2400 % line is not enough. That is bad. So let's go back to just & until
2401 % we encounter the problem it was intended to solve again. --karl,
2402 % nathan@acm.org, 20apr99.
2404 \let\startfootins=\startsavedfootnote
2407 \setmultitablespacing
2408 \parskip=\multitableparskip
2409 \parindent=\multitableparindent
2413 \global\setpercentfalse
2414 \crcrwithfootnotes\crcr
2418 % To parse everything between @multitable and @item:
2419 \setuptable#1 \endsetuptable
2421 % \everycr will reset column counter, \colcount, at the end of
2422 % each line. Every column entry will cause \colcount to advance by one.
2423 % The table preamble
2424 % looks at the current \colcount to find the correct column width.
2427 % \filbreak%% keeps underfull box messages off when table breaks over pages.
2428 % Maybe so, but it also creates really weird page breaks when the table
2429 % breaks over pages. Wouldn't \vfil be better? Wait until the problem
2430 % manifests itself, so it can be fixed for real --karl.
2431 \global\colcount=0\relax}}%
2433 % This preamble sets up a generic column definition, which will
2434 % be used as many times as user calls for columns.
2435 % \vtop will set a single line and will also let text wrap and
2436 % continue for many paragraphs if desired.
2437 \halign\bgroup&\global\advance\colcount by 1\relax
2438 \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
2440 % In order to keep entries from bumping into each other
2441 % we will add a \leftskip of \multitablecolspace to all columns after
2444 % If a template has been used, we will add \multitablecolspace
2445 % to the width of each template entry.
2447 % If the user has set preamble in terms of percent of \hsize we will
2448 % use that dimension as the width of the column, and the \leftskip
2449 % will keep entries from bumping into each other. Table will start at
2450 % left margin and final column will justify at right margin.
2452 % Make sure we don't inherit \rightskip from the outer environment.
2455 % The first column will be indented with the surrounding text.
2456 \advance\hsize by\leftskip
2459 % If user has not set preamble in terms of percent of \hsize
2460 % we will advance \hsize by \multitablecolspace.
2461 \advance\hsize by \multitablecolspace
2463 % In either case we will make \leftskip=\multitablecolspace:
2464 \leftskip=\multitablecolspace
2466 % Ignoring space at the beginning and end avoids an occasional spurious
2467 % blank line, when TeX decides to break the line at the space before the
2468 % box from the multistrut, so the strut ends up on a line by itself.
2470 % @multitable @columnfractions .11 .89
2472 % @tab Legal holiday which is valid in major parts of the whole country.
2473 % Is automatically provided with highlighting sequences respectively marking
2475 \noindent\ignorespaces##\unskip\multistrut}\cr
2478 \def\setmultitablespacing{% test to see if user has set \multitablelinespace.
2479 % If so, do nothing. If not, give it an appropriate dimension based on
2480 % current baselineskip.
2481 \ifdim\multitablelinespace=0pt
2482 \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
2483 \global\advance\multitablelinespace by-\ht0
2484 %% strut to put in table in case some entry doesn't have descenders,
2485 %% to keep lines equally spaced
2486 \let\multistrut = \strut
2488 %% FIXME: what is \box0 supposed to be?
2489 \gdef\multistrut{\vrule height\multitablelinespace depth\dp0
2491 %% Test to see if parskip is larger than space between lines of
2492 %% table. If not, do nothing.
2493 %% If so, set to same dimension as multitablelinespace.
2494 \ifdim\multitableparskip>\multitablelinespace
2495 \global\multitableparskip=\multitablelinespace
2496 \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2497 %% than skip between lines in the table.
2499 \ifdim\multitableparskip=0pt
2500 \global\multitableparskip=\multitablelinespace
2501 \global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
2502 %% than skip between lines in the table.
2505 % In case a @footnote appears inside an alignment, save the footnote
2506 % text to a box and make the \insert when a row of the table is
2507 % finished. Otherwise, the insertion is lost, it never migrates to the
2508 % main vertical list. --kasal, 22jan03.
2510 \newbox\savedfootnotes
2512 % \dotable \let's \startfootins to this, so that \dofootnote will call
2513 % it instead of starting the insertion right away.
2514 \def\startsavedfootnote{%
2515 \global\setbox\savedfootnotes = \vbox\bgroup
2516 \unvbox\savedfootnotes
2518 \def\crcrwithfootnotes{%
2520 \ifvoid\savedfootnotes \else
2521 \noalign{\insert\footins{\box\savedfootnotes}}%
2525 \message{conditionals,}
2526 % Prevent errors for section commands.
2527 % Used in @ignore and in failing conditionals.
2528 \def\ignoresections{%
2529 \let\appendix=\relax
2530 \let\appendixsec=\relax
2531 \let\appendixsection=\relax
2532 \let\appendixsubsec=\relax
2533 \let\appendixsubsection=\relax
2534 \let\appendixsubsubsec=\relax
2535 \let\appendixsubsubsection=\relax
2538 \let\centerchap=\relax
2540 \let\contents=\relax
2542 \let\smallbook=\relax
2544 \let\subsection=\relax
2545 \let\subsubsec=\relax
2546 \let\subsubsection=\relax
2547 \let\titlepage=\relax
2549 \let\unnumbered=\relax
2550 \let\unnumberedsec=\relax
2551 \let\unnumberedsection=\relax
2552 \let\unnumberedsubsec=\relax
2553 \let\unnumberedsubsection=\relax
2554 \let\unnumberedsubsubsec=\relax
2555 \let\unnumberedsubsubsection=\relax
2558 % Ignore @ignore, @ifhtml, @ifinfo, and the like.
2560 \def\direntry{\doignore{direntry}}
2561 \def\documentdescriptionword{documentdescription}
2562 \def\documentdescription{\doignore{documentdescription}}
2563 \def\html{\doignore{html}}
2564 \def\ifhtml{\doignore{ifhtml}}
2565 \def\ifinfo{\doignore{ifinfo}}
2566 \def\ifnottex{\doignore{ifnottex}}
2567 \def\ifplaintext{\doignore{ifplaintext}}
2568 \def\ifxml{\doignore{ifxml}}
2569 \def\ignore{\doignore{ignore}}
2570 \def\menu{\doignore{menu}}
2571 \def\xml{\doignore{xml}}
2573 % @dircategory CATEGORY -- specify a category of the dir file
2574 % which this file should belong to. Ignore this in TeX.
2575 \let\dircategory = \comment
2577 % Ignore text until a line `@end #1', keeping track of nested conditionals.
2579 % A count to remember the depth of nesting.
2580 \newcount\doignorecount
2582 \def\doignore#1{\begingroup
2583 % Don't complain about control sequences we have declared \outer.
2586 % Make sure that spaces turn into tokens that match what \doignoretext wants.
2587 \catcode\spaceChar = 10
2589 % Ignore braces, so mismatched braces don't cause trouble.
2593 % Count number of #1's that we've seen.
2596 % Swallow text until we reach the matching `@end #1'.
2597 \expandafter \dodoignore \csname#1\endcsname {#1}%
2600 { \catcode`@=11 % We want to use \ST@P which cannot appear in texinfo source.
2603 \gdef\dodoignore#1#2{%
2604 % #1 contains, e.g., \ifinfo, a.k.a. @ifinfo.
2605 % #2 contains the string `ifinfo'.
2607 % Define a command to find the next `@end #2', which must be on a line
2609 \long\def\doignoretext##1^^M\end #2{\doignoretextyyy##1^^M#1\ST@P}%
2610 % And this command to find another #1 command, at the beginning of a
2611 % line. (Otherwise, we would consider a line `@c @ifset', for
2612 % example, to count as an @ifset for nesting.)
2613 \long\def\doignoretextyyy##1^^M#1##2\ST@P{\doignoreyyy{##2}\ST@P}%
2615 % And now expand that command.
2621 \def\doignoreyyy#1{%
2623 \ifx\temp\empty % Nothing found.
2624 \let\next\doignoretextzzz
2625 \else % Found a nested condition, ...
2626 \advance\doignorecount by 1
2627 \let\next\doignoretextyyy % ..., look for another.
2628 % If we're here, #1 ends with ^^M\ifinfo (for example).
2630 \next #1% the token \ST@P is present just after this macro.
2633 % We have to swallow the remaining "\ST@P".
2635 \def\doignoretextzzz#1{%
2636 \ifnum\doignorecount = 0 % We have just found the outermost @end.
2637 \let\next\enddoignore
2638 \else % Still inside a nested condition.
2639 \advance\doignorecount by -1
2640 \let\next\doignoretext % Look for the next @end.
2645 % Finish off ignored text.
2646 \def\enddoignore{\endgroup\ignorespaces}
2649 % @set VAR sets the variable VAR to an empty value.
2650 % @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
2652 % Since we want to separate VAR from REST-OF-LINE (which might be
2653 % empty), we can't just use \parsearg; we have to insert a space of our
2654 % own to delimit the rest of the line, and then take it out again if we
2655 % didn't need it. Make sure the catcode of space is correct to avoid
2656 % losing inside @example, for instance.
2658 \def\set{\begingroup\catcode` =10
2659 \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
2661 \def\setxxx#1{\setyyy#1 \endsetyyy}
2662 \def\setyyy#1 #2\endsetyyy{%
2664 \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
2665 \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
2669 % Can't use \xdef to pre-expand #2 and save some time, since \temp or
2670 % \next or other control sequences that we've defined might get us into
2671 % an infinite loop. Consider `@set foo @cite{bar}'.
2672 \def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
2674 % @clear VAR clears (i.e., unsets) the variable VAR.
2676 \def\clear{\parsearg\clearxxx}
2677 \def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
2679 % @value{foo} gets the text saved in variable foo.
2681 \catcode`\_ = \active
2683 % We might end up with active _ or - characters in the argument if
2684 % we're called from @code, as @code{@value{foo-bar_}}. So \let any
2685 % such active characters to their normal equivalents.
2686 \gdef\value{\begingroup
2687 \catcode`\-=\other \catcode`\_=\other
2688 \indexbreaks \let_\normalunderscore
2691 \def\valuexxx#1{\expandablevalue{#1}\endgroup}
2693 % We have this subroutine so that we can handle at least some @value's
2694 % properly in indexes (we \let\value to this in \indexdummies). Ones
2695 % whose names contain - or _ still won't work, but we can't do anything
2696 % about that. The command has to be fully expandable (if the variable
2697 % is set), since the result winds up in the index file. This means that
2698 % if the variable's value contains other Texinfo commands, it's almost
2699 % certain it will fail (although perhaps we could fix that with
2700 % sufficient work to do a one-level expansion on the result, instead of
2703 \def\expandablevalue#1{%
2704 \expandafter\ifx\csname SET#1\endcsname\relax
2705 {[No value for ``#1'']}%
2706 \message{Variable `#1', used in @value, is not set.}%
2708 \csname SET#1\endcsname
2712 % @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
2715 \def\ifset{\parsearg\doifset}
2717 \expandafter\ifx\csname SET#1\endcsname\relax
2718 \let\next=\ifsetfail
2720 \let\next=\ifsetsucceed
2724 \def\ifsetsucceed{\conditionalsucceed{ifset}}
2725 \def\ifsetfail{\doignore{ifset}}
2726 \defineunmatchedend{ifset}
2728 % @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
2729 % defined with @set, or has been undefined with @clear.
2731 \def\ifclear{\parsearg\doifclear}
2733 \expandafter\ifx\csname SET#1\endcsname\relax
2734 \let\next=\ifclearsucceed
2736 \let\next=\ifclearfail
2740 \def\ifclearsucceed{\conditionalsucceed{ifclear}}
2741 \def\ifclearfail{\doignore{ifclear}}
2742 \defineunmatchedend{ifclear}
2744 % @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we
2745 % read the text following, through the first @end iftex (etc.). Make
2746 % `@end iftex' (etc.) valid only after an @iftex.
2748 \def\iftex{\conditionalsucceed{iftex}}
2749 \def\ifnothtml{\conditionalsucceed{ifnothtml}}
2750 \def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
2751 \def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}}
2752 \defineunmatchedend{iftex}
2753 \defineunmatchedend{ifnothtml}
2754 \defineunmatchedend{ifnotinfo}
2755 \defineunmatchedend{ifnotplaintext}
2757 % True conditional. Since \set globally defines its variables, we can
2758 % just start and end a group (to keep the @end definition undefined at
2761 \def\conditionalsucceed#1{\begingroup
2762 \expandafter\def\csname E#1\endcsname{\endgroup}%
2765 % @defininfoenclose.
2766 \let\definfoenclose=\comment
2770 % Index generation facilities
2772 % Define \newwrite to be identical to plain tex's \newwrite
2773 % except not \outer, so it can be used within \newindex.
2775 \gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
2777 % \newindex {foo} defines an index named foo.
2778 % It automatically defines \fooindex such that
2779 % \fooindex ...rest of line... puts an entry in the index foo.
2780 % It also defines \fooindfile to be the number of the output channel for
2781 % the file that accumulates this index. The file's extension is foo.
2782 % The name of an index should be no more than 2 characters long
2783 % for the sake of vms.
2787 \expandafter\newwrite \csname#1indfile\endcsname
2788 \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
2790 \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
2791 \noexpand\doindex{#1}}
2794 % @defindex foo == \newindex{foo}
2796 \def\defindex{\parsearg\newindex}
2798 % Define @defcodeindex, like @defindex except put all entries in @code.
2800 \def\defcodeindex{\parsearg\newcodeindex}
2802 \def\newcodeindex#1{%
2804 \expandafter\newwrite \csname#1indfile\endcsname
2805 \openout \csname#1indfile\endcsname \jobname.#1
2807 \expandafter\xdef\csname#1index\endcsname{%
2808 \noexpand\docodeindex{#1}}%
2812 % @synindex foo bar makes index foo feed into index bar.
2813 % Do this instead of @defindex foo if you don't want it as a separate index.
2815 % @syncodeindex foo bar similar, but put all entries made for index foo
2818 \def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
2819 \def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
2821 % #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
2822 % #3 the target index (bar).
2823 \def\dosynindex#1#2#3{%
2824 % Only do \closeout if we haven't already done it, else we'll end up
2825 % closing the target index.
2826 \expandafter \ifx\csname donesynindex#2\endcsname \undefined
2827 % The \closeout helps reduce unnecessary open files; the limit on the
2828 % Acorn RISC OS is a mere 16 files.
2829 \expandafter\closeout\csname#2indfile\endcsname
2830 \expandafter\let\csname\donesynindex#2\endcsname = 1
2832 % redefine \fooindfile:
2833 \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
2834 \expandafter\let\csname#2indfile\endcsname=\temp
2835 % redefine \fooindex:
2836 \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
2839 % Define \doindex, the driver for all \fooindex macros.
2840 % Argument #1 is generated by the calling \fooindex macro,
2841 % and it is "foo", the name of the index.
2843 % \doindex just uses \parsearg; it calls \doind for the actual work.
2844 % This is because \doind is more useful to call from other macros.
2846 % There is also \dosubind {index}{topic}{subtopic}
2847 % which makes an entry in a two-level index such as the operation index.
2849 \def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
2850 \def\singleindexer #1{\doind{\indexname}{#1}}
2852 % like the previous two, but they put @code around the argument.
2853 \def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
2854 \def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
2856 % Take care of Texinfo commands that can appear in an index entry.
2857 % Since there are some commands we want to expand, and others we don't,
2858 % we have to laboriously prevent expansion for those that we don't.
2861 \def\@{@}% change to @@ when we switch to @ as escape char in index files.
2862 \def\ {\realbackslash\space }%
2863 % Need these in case \tex is in effect and \{ is a \delimiter again.
2864 % But can't use \lbracecmd and \rbracecmd because texindex assumes
2865 % braces and backslashes are used only as delimiters.
2869 % \definedummyword defines \#1 as \realbackslash #1\space, thus
2870 % effectively preventing its expansion. This is used only for control
2871 % words, not control letters, because the \space would be incorrect
2872 % for control characters, but is needed to separate the control word
2873 % from whatever follows.
2875 % For control letters, we have \definedummyletter, which omits the
2878 % These can be used both for control words that take an argument and
2879 % those that do not. If it is followed by {arg} in the input, then
2880 % that will dutifully get written to the index (or wherever).
2882 \def\definedummyword##1{%
2883 \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
2885 \def\definedummyletter##1{%
2886 \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
2889 % Do the redefinitions.
2893 % For the aux file, @ is the escape character. So we want to redefine
2894 % everything using @ instead of \realbackslash. When everything uses
2895 % @, this will be simpler.
2900 \let\{ = \lbraceatcmd
2901 \let\} = \rbraceatcmd
2903 % (See comments in \indexdummies.)
2904 \def\definedummyword##1{%
2905 \expandafter\def\csname ##1\endcsname{@##1\space}%
2907 \def\definedummyletter##1{%
2908 \expandafter\def\csname ##1\endcsname{@##1}%
2911 % Do the redefinitions.
2915 % Called from \indexdummies and \atdummies. \definedummyword and
2916 % \definedummyletter must be defined first.
2918 \def\commondummies{%
2920 \normalturnoffactive
2922 % Control letters and accents.
2923 \definedummyletter{_}%
2924 \definedummyletter{,}%
2925 \definedummyletter{"}%
2926 \definedummyletter{`}%
2927 \definedummyletter{'}%
2928 \definedummyletter{^}%
2929 \definedummyletter{~}%
2930 \definedummyletter{=}%
2931 \definedummyword{u}%
2932 \definedummyword{v}%
2933 \definedummyword{H}%
2934 \definedummyword{dotaccent}%
2935 \definedummyword{ringaccent}%
2936 \definedummyword{tieaccent}%
2937 \definedummyword{ubaraccent}%
2938 \definedummyword{udotaccent}%
2939 \definedummyword{dotless}%
2941 % Other non-English letters.
2942 \definedummyword{AA}%
2943 \definedummyword{AE}%
2944 \definedummyword{L}%
2945 \definedummyword{OE}%
2946 \definedummyword{O}%
2947 \definedummyword{aa}%
2948 \definedummyword{ae}%
2949 \definedummyword{l}%
2950 \definedummyword{oe}%
2951 \definedummyword{o}%
2952 \definedummyword{ss}%
2954 % Although these internal commands shouldn't show up, sometimes they do.
2955 \definedummyword{bf}%
2956 \definedummyword{gtr}%
2957 \definedummyword{hat}%
2958 \definedummyword{less}%
2959 \definedummyword{sf}%
2960 \definedummyword{sl}%
2961 \definedummyword{tclose}%
2962 \definedummyword{tt}%
2964 % Texinfo font commands.
2965 \definedummyword{b}%
2966 \definedummyword{i}%
2967 \definedummyword{r}%
2968 \definedummyword{sc}%
2969 \definedummyword{t}%
2971 \definedummyword{TeX}%
2972 \definedummyword{acronym}%
2973 \definedummyword{cite}%
2974 \definedummyword{code}%
2975 \definedummyword{command}%
2976 \definedummyword{dfn}%
2977 \definedummyword{dots}%
2978 \definedummyword{emph}%
2979 \definedummyword{env}%
2980 \definedummyword{file}%
2981 \definedummyword{kbd}%
2982 \definedummyword{key}%
2983 \definedummyword{math}%
2984 \definedummyword{option}%
2985 \definedummyword{samp}%
2986 \definedummyword{strong}%
2987 \definedummyword{uref}%
2988 \definedummyword{url}%
2989 \definedummyword{var}%
2990 \definedummyword{w}%
2992 % Assorted special characters.
2993 \definedummyword{bullet}%
2994 \definedummyword{copyright}%
2995 \definedummyword{dots}%
2996 \definedummyword{enddots}%
2997 \definedummyword{equiv}%
2998 \definedummyword{error}%
2999 \definedummyword{expansion}%
3000 \definedummyword{minus}%
3001 \definedummyword{pounds}%
3002 \definedummyword{point}%
3003 \definedummyword{print}%
3004 \definedummyword{result}%
3006 % Handle some cases of @value -- where the variable name does not
3007 % contain - or _, and the value does not contain any
3008 % (non-fully-expandable) commands.
3009 \let\value = \expandablevalue
3011 % Normal spaces, not active ones.
3014 % No macro expansion.
3018 % If an index command is used in an @example environment, any spaces
3019 % therein should become regular spaces in the raw index file, not the
3020 % expansion of \tie (\leavevmode \penalty \@M \ ).
3022 \gdef\unsepspaces{\obeyspaces\let =\space}}
3025 % \indexnofonts is used when outputting the strings to sort the index
3026 % by, and when constructing control sequence names. It eliminates all
3027 % control sequences and just writes whatever the best ASCII sort string
3028 % would be for a given command (usually its argument).
3030 \def\indexdummytex{TeX}
3031 \def\indexdummydots{...}
3036 % how to handle braces?
3037 \def\_{\normalunderscore}%
3049 \let\dotaccent=\asis
3050 \let\ringaccent=\asis
3051 \let\tieaccent=\asis
3052 \let\ubaraccent=\asis
3053 \let\udotaccent=\asis
3056 % Other non-English letters.
3069 \def\questiondown{?}%
3071 % Don't no-op \tt, since it isn't a user-level command
3072 % and is used in the definitions of the active chars like <, >, |, etc.
3073 % Likewise with the other plain tex font commands.
3076 % Texinfo font commands.
3083 \let\TeX=\indexdummytex
3089 \let\dots=\indexdummydots
3105 \let\indexbackslash=0 %overridden during \printindex.
3106 \let\SETmarginindex=\relax % put index entries in margin (undocumented)?
3108 % For \ifx comparisons.
3109 \def\emptymacro{\empty}
3111 % Most index entries go through here, but \dosubind is the general case.
3113 \def\doind#1#2{\dosubind{#1}{#2}\empty}
3115 % Workhorse for all \fooindexes.
3116 % #1 is name of index, #2 is stuff to put there, #3 is subentry --
3117 % \empty if called from \doind, as we usually are. The main exception
3118 % is with defuns, which call us directly.
3120 \def\dosubind#1#2#3{%
3121 % Put the index entry in the margin if desired.
3122 \ifx\SETmarginindex\relax\else
3123 \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
3126 \count255=\lastpenalty
3128 \indexdummies % Must do this here, since \bf, etc expand at this stage
3131 \let\folio = 0% We will expand all macros now EXCEPT \folio.
3132 \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
3133 % so it will be output as is; and it will print as backslash.
3135 % The main index entry text.
3138 % If third arg is present, precede it with space in sort key.
3140 \ifx\thirdarg\emptymacro \else
3141 % If the third (subentry) arg is present, add it to the index
3143 \toks0 = \expandafter{\the\toks0 \space #3}%
3146 % Process the index entry with all font commands turned off, to
3147 % get the string to sort by.
3149 \edef\temp{\the\toks0}% need full expansion
3150 \xdef\indexsorttmp{\temp}%
3153 % Set up the complete index entry, with both the sort key and
3154 % the original text, including any font commands. We write
3155 % three arguments to \entry to the .?? file (four in the
3156 % subentry case), texindex reduces to two when writing the .??s
3159 \write\csname#1indfile\endcsname{%
3160 \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
3163 % If a skip is the last thing on the list now, preserve it
3164 % by backing up by \lastskip, doing the \write, then inserting
3165 % the skip again. Otherwise, the whatsit generated by the
3166 % \write will make \lastskip zero. The result is that sequences
3171 % will have extra space inserted, because the \medbreak in the
3172 % start of the @defun won't see the skip inserted by the @end of
3173 % the previous defun.
3175 % But don't do any of this if we're not in vertical mode. We
3176 % don't want to do a \vskip and prematurely end a paragraph.
3178 % Avoid page breaks due to these extra skips, too.
3183 \ifdim\lastskip = 0pt \else \nobreak\vskip-\skip0 \fi
3186 \temp % do the write
3188 \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
3196 % The index entry written in the file actually looks like
3197 % \entry {sortstring}{page}{topic}
3199 % \entry {sortstring}{page}{topic}{subtopic}
3200 % The texindex program reads in these files and writes files
3201 % containing these kinds of lines:
3203 % before the first topic whose initial is c
3204 % \entry {topic}{pagelist}
3205 % for a topic that is used without subtopics
3207 % for the beginning of a topic that is used with subtopics
3208 % \secondary {subtopic}{pagelist}
3209 % for each subtopic.
3211 % Define the user-accessible indexing commands
3212 % @findex, @vindex, @kindex, @cindex.
3214 \def\findex {\fnindex}
3215 \def\kindex {\kyindex}
3216 \def\cindex {\cpindex}
3217 \def\vindex {\vrindex}
3218 \def\tindex {\tpindex}
3219 \def\pindex {\pgindex}
3221 \def\cindexsub {\begingroup\obeylines\cindexsub}
3223 \gdef\cindexsub "#1" #2^^M{\endgroup %
3224 \dosubind{cp}{#2}{#1}}}
3226 % Define the macros used in formatting output of the sorted index material.
3228 % @printindex causes a particular index (the ??s file) to get printed.
3229 % It does not print any chapter heading (usually an @unnumbered).
3231 \def\printindex{\parsearg\doprintindex}
3232 \def\doprintindex#1{\begingroup
3233 \dobreak \chapheadingskip{10000}%
3237 \everypar = {}% don't want the \kern\-parindent from indentation suppression.
3240 % See if the index file exists and is nonempty.
3241 % Change catcode of @ here so that if the index file contains
3243 % as its first line, TeX doesn't complain about mismatched braces
3244 % (because it thinks @} is a control sequence).
3246 \openin 1 \jobname.#1s
3248 % \enddoublecolumns gets confused if there is no text in the index,
3249 % and it loses the chapter title and the aux file entries for the
3250 % index. The easiest way to prevent this problem is to make sure
3251 % there is some text.
3252 \putwordIndexNonexistent
3255 % If the index file exists but is empty, then \openin leaves \ifeof
3256 % false. We have to make TeX try to read something from the file, so
3257 % it can discover if there is anything in it.
3260 \putwordIndexIsEmpty
3262 % Index files are almost Texinfo source, but we use \ as the escape
3263 % character. It would be better to use @, but that's too big a change
3264 % to make right now.
3265 \def\indexbackslash{\rawbackslashxx}%
3276 % These macros are used by the sorted index file itself.
3277 % Change them to control the appearance of the index.
3280 % Some minor font changes for the special characters.
3281 \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
3283 % Remove any glue we may have, we'll be inserting our own.
3286 % We like breaks before the index initials, so insert a bonus.
3289 % Typeset the initial. Making this add up to a whole number of
3290 % baselineskips increases the chance of the dots lining up from column
3291 % to column. It still won't often be perfect, because of the stretch
3292 % we need before each entry, but it's better.
3294 % No shrink because it confuses \balancecolumns.
3295 \vskip 1.67\baselineskip plus .5\baselineskip
3296 \leftline{\secbf #1}%
3297 \vskip .33\baselineskip plus .1\baselineskip
3299 % Do our best not to break after the initial.
3303 % This typesets a paragraph consisting of #1, dot leaders, and then #2
3304 % flush to the right margin. It is used for index and table of contents
3305 % entries. The paragraph is indented by \leftskip.
3307 \def\entry#1#2{\begingroup
3309 % Start a new paragraph if necessary, so our assignments below can't
3310 % affect previous text.
3313 % Do not fill out the last line with white space.
3316 % No extra space above this paragraph.
3319 % Do not prefer a separate line ending with a hyphen to fewer lines.
3320 \finalhyphendemerits = 0
3322 % \hangindent is only relevant when the entry text and page number
3323 % don't both fit on one line. In that case, bob suggests starting the
3324 % dots pretty far over on the line. Unfortunately, a large
3325 % indentation looks wrong when the entry text itself is broken across
3326 % lines. So we use a small indentation and put up with long leaders.
3328 % \hangafter is reset to 1 (which is the value we want) at the start
3329 % of each paragraph, so we need not do anything with that.
3332 % When the entry text needs to be broken, just fill out the first line
3334 \rightskip = 0pt plus1fil
3336 % A bit of stretch before each entry for the benefit of balancing columns.
3339 % Start a ``paragraph'' for the index entry so the line breaking
3340 % parameters we've set above will have an effect.
3343 % Insert the text of the index entry. TeX will do line-breaking on it.
3345 % The following is kludged to not output a line of dots in the index if
3346 % there are no page numbers. The next person who breaks this will be
3347 % cursed by a Unix daemon.
3350 \edef\tempc{\tempa}%
3351 \edef\tempd{\tempb}%
3352 \ifx\tempc\tempd\ \else%
3354 % If we must, put the page number on a line of its own, and fill out
3355 % this line with blank space. (The \hfil is overwhelmed with the
3356 % fill leaders glue in \indexdotfill if the page number does fit.)
3358 \null\nobreak\indexdotfill % Have leaders before the page number.
3360 % The `\ ' here is removed by the implicit \unskip that TeX does as
3361 % part of (the primitive) \par. Without it, a spurious underfull
3364 \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
3366 \ #2% The page number ends the paragraph.
3372 % Like \dotfill except takes at least 1 em.
3373 \def\indexdotfill{\cleaders
3374 \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
3376 \def\primary #1{\line{#1\hfil}}
3378 \newskip\secondaryindent \secondaryindent=0.5cm
3379 \def\secondary#1#2{{%
3384 \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
3386 \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
3393 % Define two-column mode, which we use to typeset indexes.
3394 % Adapted from the TeXbook, page 416, which is to say,
3395 % the manmac.tex format used to print the TeXbook itself.
3399 \newdimen\doublecolumnhsize
3401 \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
3402 % Grab any single-column material above us.
3405 % Here is a possibility not foreseen in manmac: if we accumulate a
3406 % whole lot of material, we might end up calling this \output
3407 % routine twice in a row (see the doublecol-lose test, which is
3408 % essentially a couple of indexes with @setchapternewpage off). In
3409 % that case we just ship out what is in \partialpage with the normal
3410 % output routine. Generally, \partialpage will be empty when this
3411 % runs and this will be a no-op. See the indexspread.tex test case.
3412 \ifvoid\partialpage \else
3413 \onepageout{\pagecontents\partialpage}%
3416 \global\setbox\partialpage = \vbox{%
3417 % Unvbox the main output page.
3419 \kern-\topskip \kern\baselineskip
3422 \eject % run that output routine to set \partialpage
3424 % Use the double-column output routine for subsequent pages.
3425 \output = {\doublecolumnout}%
3427 % Change the page size parameters. We could do this once outside this
3428 % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
3429 % format, but then we repeat the same computation. Repeating a couple
3430 % of assignments once per index is clearly meaningless for the
3431 % execution time, so we may as well do it in one place.
3433 % First we halve the line length, less a little for the gutter between
3434 % the columns. We compute the gutter based on the line length, so it
3435 % changes automatically with the paper format. The magic constant
3436 % below is chosen so that the gutter has the same value (well, +-<1pt)
3437 % as it did when we hard-coded it.
3439 % We put the result in a separate register, \doublecolumhsize, so we
3440 % can restore it in \pagesofar, after \hsize itself has (potentially)
3443 \doublecolumnhsize = \hsize
3444 \advance\doublecolumnhsize by -.04154\hsize
3445 \divide\doublecolumnhsize by 2
3446 \hsize = \doublecolumnhsize
3448 % Double the \vsize as well. (We don't need a separate register here,
3449 % since nobody clobbers \vsize.)
3453 % The double-column output routine for all double-column pages except
3456 \def\doublecolumnout{%
3457 \splittopskip=\topskip \splitmaxdepth=\maxdepth
3458 % Get the available space for the double columns -- the normal
3459 % (undoubled) page height minus any material left over from the
3463 \advance\dimen@ by -\ht\partialpage
3465 % box0 will be the left-hand column, box2 the right.
3466 \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
3467 \onepageout\pagesofar
3469 \penalty\outputpenalty
3472 % Re-output the contents of the output page -- any previous material,
3473 % followed by the two boxes we just split, in box0 and box2.
3477 \hsize = \doublecolumnhsize
3478 \wd0=\hsize \wd2=\hsize
3479 \hbox to\pagewidth{\box0\hfil\box2}%
3482 % All done with double columns.
3483 \def\enddoublecolumns{%
3485 % Split the last of the double-column material. Leave it on the
3486 % current page, no automatic page break.
3489 % If we end up splitting too much material for the current page,
3490 % though, there will be another page break right after this \output
3491 % invocation ends. Having called \balancecolumns once, we do not
3492 % want to call it again. Therefore, reset \output to its normal
3493 % definition right away. (We hope \balancecolumns will never be
3494 % called on to balance too much material, but if it is, this makes
3495 % the output somewhat more palatable.)
3496 \global\output = {\onepageout{\pagecontents\PAGE}}%
3499 \endgroup % started in \begindoublecolumns
3501 % \pagegoal was set to the doubled \vsize above, since we restarted
3502 % the current page. We're now back to normal single-column
3503 % typesetting, so reset \pagegoal to the normal \vsize (after the
3504 % \endgroup where \vsize got restored).
3508 % Called at the end of the double column material.
3509 \def\balancecolumns{%
3510 \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
3512 \advance\dimen@ by \topskip
3513 \advance\dimen@ by-\baselineskip
3514 \divide\dimen@ by 2 % target to split to
3515 %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
3516 \splittopskip = \topskip
3517 % Loop until we get a decent breakpoint.
3521 \global\setbox3 = \copy0
3522 \global\setbox1 = \vsplit3 to \dimen@
3524 \global\advance\dimen@ by 1pt
3527 %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
3528 \setbox0=\vbox to\dimen@{\unvbox1}%
3529 \setbox2=\vbox to\dimen@{\unvbox3}%
3533 \catcode`\@ = \other
3536 \message{sectioning,}
3537 % Chapters, sections, etc.
3540 \newcount\secno \secno=0
3541 \newcount\subsecno \subsecno=0
3542 \newcount\subsubsecno \subsubsecno=0
3544 % This counter is funny since it counts through charcodes of letters A, B, ...
3545 \newcount\appendixno \appendixno = `\@
3546 % \def\appendixletter{\char\the\appendixno}
3547 % We do the following for the sake of pdftex, which needs the actual
3548 % letter in the expansion, not just typeset.
3549 \def\appendixletter{%
3550 \ifnum\appendixno=`A A%
3551 \else\ifnum\appendixno=`B B%
3552 \else\ifnum\appendixno=`C C%
3553 \else\ifnum\appendixno=`D D%
3554 \else\ifnum\appendixno=`E E%
3555 \else\ifnum\appendixno=`F F%
3556 \else\ifnum\appendixno=`G G%
3557 \else\ifnum\appendixno=`H H%
3558 \else\ifnum\appendixno=`I I%
3559 \else\ifnum\appendixno=`J J%
3560 \else\ifnum\appendixno=`K K%
3561 \else\ifnum\appendixno=`L L%
3562 \else\ifnum\appendixno=`M M%
3563 \else\ifnum\appendixno=`N N%
3564 \else\ifnum\appendixno=`O O%
3565 \else\ifnum\appendixno=`P P%
3566 \else\ifnum\appendixno=`Q Q%
3567 \else\ifnum\appendixno=`R R%
3568 \else\ifnum\appendixno=`S S%
3569 \else\ifnum\appendixno=`T T%
3570 \else\ifnum\appendixno=`U U%
3571 \else\ifnum\appendixno=`V V%
3572 \else\ifnum\appendixno=`W W%
3573 \else\ifnum\appendixno=`X X%
3574 \else\ifnum\appendixno=`Y Y%
3575 \else\ifnum\appendixno=`Z Z%
3576 % The \the is necessary, despite appearances, because \appendixletter is
3577 % expanded while writing the .toc file. \char\appendixno is not
3578 % expandable, thus it is written literally, thus all appendixes come out
3579 % with the same letter (or @) in the toc without it.
3580 \else\char\the\appendixno
3581 \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
3582 \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
3584 % Each @chapter defines this as the name of the chapter.
3585 % page headings and footings can use it. @section does likewise.
3589 \newcount\absseclevel % used to calculate proper heading level
3590 \newcount\secbase\secbase=0 % @raise/lowersections modify this count
3592 % @raisesections: treat @section as chapter, @subsection as section, etc.
3593 \def\raisesections{\global\advance\secbase by -1}
3594 \let\up=\raisesections % original BFox name
3596 % @lowersections: treat @chapter as section, @section as subsection, etc.
3597 \def\lowersections{\global\advance\secbase by 1}
3598 \let\down=\lowersections % original BFox name
3600 % Choose a numbered-heading macro
3601 % #1 is heading level if unmodified by @raisesections or @lowersections
3602 % #2 is text for heading
3603 \def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3609 \numberedsubseczzz{#2}
3611 \numberedsubsubseczzz{#2}
3613 \ifnum \absseclevel<0
3616 \numberedsubsubseczzz{#2}
3619 \suppressfirstparagraphindent
3622 % like \numhead, but chooses appendix heading levels
3623 \def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3627 \appendixsectionzzz{#2}
3629 \appendixsubseczzz{#2}
3631 \appendixsubsubseczzz{#2}
3633 \ifnum \absseclevel<0
3636 \appendixsubsubseczzz{#2}
3639 \suppressfirstparagraphindent
3642 % like \numhead, but chooses numberless heading levels
3643 \def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
3647 \unnumberedseczzz{#2}
3649 \unnumberedsubseczzz{#2}
3651 \unnumberedsubsubseczzz{#2}
3653 \ifnum \absseclevel<0
3656 \unnumberedsubsubseczzz{#2}
3659 \suppressfirstparagraphindent
3662 % @chapter, @appendix, @unnumbered.
3663 \def\thischaptername{No Chapter Title}
3664 \outer\def\chapter{\parsearg\chapteryyy}
3665 \def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
3666 \def\chapterzzz #1{%
3667 \secno=0 \subsecno=0 \subsubsecno=0
3668 \global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
3669 \chapmacro {#1}{\the\chapno}%
3670 \gdef\thissection{#1}%
3671 \gdef\thischaptername{#1}%
3672 % We don't substitute the actual chapter name into \thischapter
3673 % because we don't want its macros evaluated now.
3674 \xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
3675 \writetocentry{chap}{#1}{{\the\chapno}}
3677 \global\let\section = \numberedsec
3678 \global\let\subsection = \numberedsubsec
3679 \global\let\subsubsection = \numberedsubsubsec
3682 % we use \chapno to avoid indenting back
3683 \def\appendixbox#1{%
3684 \setbox0 = \hbox{\putwordAppendix{} \the\chapno}%
3685 \hbox to \wd0{#1\hss}}
3687 \outer\def\appendix{\parsearg\appendixyyy}
3688 \def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
3689 \def\appendixzzz #1{%
3690 \secno=0 \subsecno=0 \subsubsecno=0
3691 \global\advance \appendixno by 1
3692 \message{\putwordAppendix\space \appendixletter}%
3693 \chapmacro {#1}{\appendixbox{\putwordAppendix{} \appendixletter}}%
3694 \gdef\thissection{#1}%
3695 \gdef\thischaptername{#1}%
3696 \xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
3697 \writetocentry{appendix}{#1}{{\appendixletter}}
3699 \global\let\section = \appendixsec
3700 \global\let\subsection = \appendixsubsec
3701 \global\let\subsubsection = \appendixsubsubsec
3704 % @centerchap is like @unnumbered, but the heading is centered.
3705 \outer\def\centerchap{\parsearg\centerchapyyy}
3706 \def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
3708 % @top is like @unnumbered.
3709 \outer\def\top{\parsearg\unnumberedyyy}
3711 \outer\def\unnumbered{\parsearg\unnumberedyyy}
3712 \def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
3713 \def\unnumberedzzz #1{%
3714 \secno=0 \subsecno=0 \subsubsecno=0
3716 % This used to be simply \message{#1}, but TeX fully expands the
3717 % argument to \message. Therefore, if #1 contained @-commands, TeX
3718 % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
3719 % expanded @cite (which turns out to cause errors because \cite is meant
3720 % to be executed, not expanded).
3722 % Anyway, we don't want the fully-expanded definition of @cite to appear
3723 % as a result of the \message, we just want `@cite' itself. We use
3724 % \the<toks register> to achieve this: TeX expands \the<toks> only once,
3725 % simply yielding the contents of <toks register>. (We also do this for
3727 \toks0 = {#1}\message{(\the\toks0)}%
3729 \unnumbchapmacro {#1}%
3730 \gdef\thischapter{#1}\gdef\thissection{#1}%
3731 \writetocentry{unnumbchap}{#1}{{\the\chapno}}
3733 \global\let\section = \unnumberedsec
3734 \global\let\subsection = \unnumberedsubsec
3735 \global\let\subsubsection = \unnumberedsubsubsec
3739 \outer\def\numberedsec{\parsearg\secyyy}
3740 \def\secyyy #1{\numhead1{#1}} % normally calls seczzz
3742 \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3743 \gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
3744 \writetocentry{sec}{#1}{{\the\chapno}{\the\secno}}
3749 \outer\def\appendixsection{\parsearg\appendixsecyyy}
3750 \outer\def\appendixsec{\parsearg\appendixsecyyy}
3751 \def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
3752 \def\appendixsectionzzz #1{%
3753 \subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
3754 \gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
3755 \writetocentry{sec}{#1}{{\appendixletter}{\the\secno}}
3760 \outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
3761 \def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
3762 \def\unnumberedseczzz #1{%
3763 \plainsecheading {#1}\gdef\thissection{#1}%
3764 \writetocentry{unnumbsec}{#1}{{\the\chapno}{\the\secno}}
3770 \outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
3771 \def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
3772 \def\numberedsubseczzz #1{%
3773 \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3774 \subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
3775 \writetocentry{subsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}}
3780 \outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
3781 \def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
3782 \def\appendixsubseczzz #1{%
3783 \gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
3784 \subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
3785 \writetocentry{subsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}}
3790 \outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
3791 \def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
3792 \def\unnumberedsubseczzz #1{%
3793 \plainsubsecheading {#1}\gdef\thissection{#1}%
3794 \writetocentry{unnumbsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}}
3800 \outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
3801 \def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
3802 \def\numberedsubsubseczzz #1{%
3803 \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3804 \subsubsecheading {#1}
3805 {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3806 \writetocentry{subsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
3811 \outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
3812 \def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
3813 \def\appendixsubsubseczzz #1{%
3814 \gdef\thissection{#1}\global\advance \subsubsecno by 1 %
3815 \subsubsecheading {#1}
3816 {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
3817 \writetocentry{subsubsec}{#1}{{\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
3822 \outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
3823 \def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
3824 \def\unnumberedsubsubseczzz #1{%
3825 \plainsubsubsecheading {#1}\gdef\thissection{#1}%
3826 \writetocentry{unnumbsubsubsec}{#1}{{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}
3831 % These are variants which are not "outer", so they can appear in @ifinfo.
3832 % Actually, they should now be obsolete; ordinary section commands should work.
3833 \def\infotop{\parsearg\unnumberedzzz}
3834 \def\infounnumbered{\parsearg\unnumberedzzz}
3835 \def\infounnumberedsec{\parsearg\unnumberedseczzz}
3836 \def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
3837 \def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
3839 \def\infoappendix{\parsearg\appendixzzz}
3840 \def\infoappendixsec{\parsearg\appendixseczzz}
3841 \def\infoappendixsubsec{\parsearg\appendixsubseczzz}
3842 \def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
3844 \def\infochapter{\parsearg\chapterzzz}
3845 \def\infosection{\parsearg\sectionzzz}
3846 \def\infosubsection{\parsearg\subsectionzzz}
3847 \def\infosubsubsection{\parsearg\subsubsectionzzz}
3849 % These macros control what the section commands do, according
3850 % to what kind of chapter we are in (ordinary, appendix, or unnumbered).
3851 % Define them by default for a numbered chapter.
3852 \global\let\section = \numberedsec
3853 \global\let\subsection = \numberedsubsec
3854 \global\let\subsubsection = \numberedsubsubsec
3856 % Define @majorheading, @heading and @subheading
3858 % NOTE on use of \vbox for chapter headings, section headings, and such:
3859 % 1) We use \vbox rather than the earlier \line to permit
3860 % overlong headings to fold.
3861 % 2) \hyphenpenalty is set to 10000 because hyphenation in a
3862 % heading is obnoxious; this forbids it.
3863 % 3) Likewise, headings look best if no \parindent is used, and
3864 % if justification is not attempted. Hence \raggedright.
3868 {\advance\chapheadingskip by 10pt \chapbreak }%
3869 \parsearg\chapheadingzzz
3872 \def\chapheading{\chapbreak \parsearg\chapheadingzzz}
3873 \def\chapheadingzzz #1{%
3874 {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3875 \parindent=0pt\raggedright
3877 \bigskip \par\penalty 200\relax
3878 \suppressfirstparagraphindent
3881 % @heading, @subheading, @subsubheading.
3882 \def\heading{\parsearg\doheading}
3883 \def\subheading{\parsearg\dosubheading}
3884 \def\subsubheading{\parsearg\dosubsubheading}
3885 \def\doheading#1{\plainsecheading{#1}\suppressfirstparagraphindent}
3886 \def\dosubheading#1{\plainsubsecheading{#1}\suppressfirstparagraphindent}
3887 \def\dosubsubheading#1{\plainsubsubsecheading{#1}\suppressfirstparagraphindent}
3889 % These macros generate a chapter, section, etc. heading only
3890 % (including whitespace, linebreaking, etc. around it),
3891 % given all the information in convenient, parsed form.
3893 %%% Args are the skip and penalty (usually negative)
3894 \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
3896 \def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
3898 %%% Define plain chapter starts, and page on/off switching for it
3899 % Parameter controlling skip before chapter headings (if needed)
3901 \newskip\chapheadingskip
3903 \def\chapbreak{\dobreak \chapheadingskip {-4000}}
3904 \def\chappager{\par\vfill\supereject}
3905 \def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
3907 \def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
3910 \global\let\contentsalignmacro = \chappager
3911 \global\let\pchapsepmacro=\chapbreak
3912 \global\let\pagealignmacro=\chappager}
3915 \global\let\contentsalignmacro = \chappager
3916 \global\let\pchapsepmacro=\chappager
3917 \global\let\pagealignmacro=\chappager
3918 \global\def\HEADINGSon{\HEADINGSsingle}}
3921 \global\let\contentsalignmacro = \chapoddpage
3922 \global\let\pchapsepmacro=\chapoddpage
3923 \global\let\pagealignmacro=\chapoddpage
3924 \global\def\HEADINGSon{\HEADINGSdouble}}
3929 \global\let\chapmacro=\chfplain
3930 \global\let\unnumbchapmacro=\unnchfplain
3931 \global\let\centerchapmacro=\centerchfplain}
3933 % Plain chapter opening.
3934 % #1 is the text, #2 the chapter number or empty if unnumbered.
3940 \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
3941 \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
3942 \hangindent = \wd0 \centerparametersmaybe
3945 \nobreak\bigskip % no page break after a chapter title
3949 % Plain opening for unnumbered.
3950 \def\unnchfplain#1{\chfplain{#1}{}}
3952 % @centerchap -- centered and unnumbered.
3953 \let\centerparametersmaybe = \relax
3954 \def\centerchfplain#1{{%
3955 \def\centerparametersmaybe{%
3956 \advance\rightskip by 3\rightskip
3957 \leftskip = \rightskip
3963 \CHAPFplain % The default
3965 \def\unnchfopen #1{%
3966 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3967 \parindent=0pt\raggedright
3968 \rm #1\hfill}}\bigskip \par\nobreak
3971 \def\chfopen #1#2{\chapoddpage {\chapfonts
3972 \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
3976 \def\centerchfopen #1{%
3977 \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
3979 \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
3983 \global\let\chapmacro=\chfopen
3984 \global\let\unnumbchapmacro=\unnchfopen
3985 \global\let\centerchapmacro=\centerchfopen}
3989 \newskip\secheadingskip
3990 \def\secheadingbreak{\dobreak \secheadingskip {-1000}}
3991 \def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
3992 \def\plainsecheading#1{\sectionheading{sec}{}{#1}}
3994 % Subsection titles.
3995 \newskip \subsecheadingskip
3996 \def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
3997 \def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
3998 \def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
4000 % Subsubsection titles.
4001 \let\subsubsecheadingskip = \subsecheadingskip
4002 \let\subsubsecheadingbreak = \subsecheadingbreak
4003 \def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
4004 \def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
4007 % Print any size section title.
4009 % #1 is the section type (sec/subsec/subsubsec), #2 is the section
4010 % number (maybe empty), #3 the text.
4011 \def\sectionheading#1#2#3{%
4013 \expandafter\advance\csname #1headingskip\endcsname by \parskip
4014 \csname #1headingbreak\endcsname
4017 % Switch to the right set of fonts.
4018 \csname #1fonts\endcsname \rm
4020 % Only insert the separating space if we have a section number.
4022 \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
4024 \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
4025 \hangindent = \wd0 % zero if no section number
4028 % Add extra space after the heading -- either a line space or a
4029 % paragraph space, whichever is more. (Some people like to set
4030 % \parskip to large values for some reason.) Don't allow stretch, though.
4032 \ifdim\parskip>\normalbaselineskip
4035 \kern\normalbaselineskip
4042 % Table of contents.
4045 % Write an entry to the toc file, opening it if necessary.
4046 % Called from @chapter, etc. We supply {\folio} at the end of the
4047 % argument, which will end up as the last argument to the \...entry macro.
4049 % Usage: \writetocentry{chap}{The Name of The Game}{{\the\chapno}}
4050 % We open the .toc file for writing here instead of at @setfilename (or
4051 % any other fixed time) so that @contents can be anywhere in the document.
4053 \newif\iftocfileopened
4054 \def\writetocentry#1#2#3{%
4055 \iftocfileopened\else
4056 \immediate\openout\tocfile = \jobname.toc
4057 \global\tocfileopenedtrue
4062 \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}#3{\folio}}}%
4066 % Tell \shipout to create a page destination if we're doing pdf, which
4067 % will be the target of the links in the table of contents. We can't
4068 % just do it on every page because the title pages are numbered 1 and
4069 % 2 (the page numbers aren't printed), and so are the first two pages
4070 % of the document. Thus, we'd have two destinations named `1', and
4072 \ifpdf \pdfmakepagedesttrue \fi
4075 \newskip\contentsrightmargin \contentsrightmargin=1in
4076 \newcount\savepageno
4077 \newcount\lastnegativepageno \lastnegativepageno = -1
4079 % Finish up the main text and prepare to read what we've written
4082 \def\startcontents#1{%
4083 % If @setchapternewpage on, and @headings double, the contents should
4084 % start on an odd page, unlike chapters. Thus, we maintain
4085 % \contentsalignmacro in parallel with \pagealignmacro.
4086 % From: Torbjorn Granlund <tege@matematik.su.se>
4088 \immediate\closeout\tocfile
4090 % Don't need to put `Contents' or `Short Contents' in the headline.
4091 % It is abundantly clear what they are.
4092 \unnumbchapmacro{#1}\def\thischapter{}%
4093 \savepageno = \pageno
4094 \begingroup % Set up to handle contents files properly.
4095 \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
4096 % We can't do this, because then an actual ^ in a section
4097 % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
4098 %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
4099 \raggedbottom % Worry more about breakpoints than the bottom.
4100 \advance\hsize by -\contentsrightmargin % Don't use the full line length.
4102 % Roman numerals for page numbers.
4103 \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
4107 % Normal (long) toc.
4109 \startcontents{\putwordTOC}%
4110 \openin 1 \jobname.toc
4116 \contentsalignmacro % in case @setchapternewpage odd is in effect
4119 \lastnegativepageno = \pageno
4120 \global\pageno = \savepageno
4123 % And just the chapters.
4124 \def\summarycontents{%
4125 \startcontents{\putwordShortTOC}%
4127 \let\chapentry = \shortchapentry
4128 \let\appendixentry = \shortappendixentry
4129 \let\unnumbchapentry = \shortunnumberedentry
4130 % We want a true roman here for the page numbers.
4132 \let\rm=\shortcontrm \let\bf=\shortcontbf
4133 \let\sl=\shortcontsl \let\tt=\shortconttt
4135 \hyphenpenalty = 10000
4136 \advance\baselineskip by 1pt % Open it up a little.
4137 \def\secentry ##1##2##3##4{}
4138 \def\subsecentry ##1##2##3##4##5{}
4139 \def\subsubsecentry ##1##2##3##4##5##6{}
4140 \let\unnumbsecentry = \secentry
4141 \let\unnumbsubsecentry = \subsecentry
4142 \let\unnumbsubsubsecentry = \subsubsecentry
4143 \openin 1 \jobname.toc
4149 \contentsalignmacro % in case @setchapternewpage odd is in effect
4151 \lastnegativepageno = \pageno
4152 \global\pageno = \savepageno
4154 \let\shortcontents = \summarycontents
4157 \pdfcatalog{/PageMode /UseOutlines}%
4160 % These macros generate individual entries in the table of contents.
4161 % The first argument is the chapter or section name.
4162 % The last argument is the page number.
4163 % The arguments in between are the chapter number, section number, ...
4165 % Chapters, in the main contents.
4166 \def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
4168 % Chapters, in the short toc.
4169 % See comments in \dochapentry re vbox and related settings.
4170 \def\shortchapentry#1#2#3{%
4171 \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#3\egroup}%
4174 % Appendices, in the main contents.
4175 \def\appendixentry#1#2#3{%
4176 \dochapentry{\appendixbox{\putwordAppendix{} #2}\labelspace#1}{#3}}
4178 % Appendices, in the short toc.
4179 \let\shortappendixentry = \shortchapentry
4181 % Typeset the label for a chapter or appendix for the short contents.
4182 % The arg is, e.g., `Appendix A' for an appendix, or `3' for a chapter.
4183 % We could simplify the code here by writing out an \appendixentry
4184 % command in the toc file for appendices, instead of using \chapentry
4185 % for both, but it doesn't seem worth it.
4187 \newdimen\shortappendixwidth
4189 \def\shortchaplabel#1{%
4190 % This space should be enough, since a single number is .5em, and the
4191 % widest letter (M) is 1em, at least in the Computer Modern fonts.
4192 % But use \hss just in case.
4193 % (This space doesn't include the extra space that gets added after
4194 % the label; that gets put in by \shortchapentry above.)
4196 \hbox to \dimen0{#1\hss}%
4199 % Unnumbered chapters.
4200 \def\unnumbchapentry#1#2#3{\dochapentry{#1}{#3}}
4201 \def\shortunnumberedentry#1#2#3{\tocentry{#1}{\doshortpageno\bgroup#3\egroup}}
4204 \def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
4205 \def\unnumbsecentry#1#2#3#4{\dosecentry{#1}{#4}}
4208 \def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
4209 \def\unnumbsubsecentry#1#2#3#4#5{\dosubsecentry{#1}{#5}}
4211 % And subsubsections.
4212 \def\subsubsecentry#1#2#3#4#5#6{%
4213 \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
4214 \def\unnumbsubsubsecentry#1#2#3#4#5#6{\dosubsubsecentry{#1}{#6}}
4216 % This parameter controls the indentation of the various levels.
4217 \newdimen\tocindent \tocindent = 3pc
4219 % Now for the actual typesetting. In all these, #1 is the text and #2 is the
4222 % If the toc has to be broken over pages, we want it to be at chapters
4223 % if at all possible; hence the \penalty.
4224 \def\dochapentry#1#2{%
4225 \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
4228 \tocentry{#1}{\dopageno\bgroup#2\egroup}%
4230 \nobreak\vskip .25\baselineskip plus.1\baselineskip
4233 \def\dosecentry#1#2{\begingroup
4234 \secentryfonts \leftskip=\tocindent
4235 \tocentry{#1}{\dopageno\bgroup#2\egroup}%
4238 \def\dosubsecentry#1#2{\begingroup
4239 \subsecentryfonts \leftskip=2\tocindent
4240 \tocentry{#1}{\dopageno\bgroup#2\egroup}%
4243 \def\dosubsubsecentry#1#2{\begingroup
4244 \subsubsecentryfonts \leftskip=3\tocindent
4245 \tocentry{#1}{\dopageno\bgroup#2\egroup}%
4248 % Final typesetting of a toc entry; we use the same \entry macro as for
4249 % the index entries, but we want to suppress hyphenation here. (We
4250 % can't do that in the \entry macro, since index entries might consist
4251 % of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
4252 \def\tocentry#1#2{\begingroup
4253 \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
4254 % Do not use \turnoffactive in these arguments. Since the toc is
4255 % typeset in cmr, characters such as _ would come out wrong; we
4256 % have to do the usual translation tricks.
4260 % Space between chapter (or whatever) number and the title.
4261 \def\labelspace{\hskip1em \relax}
4263 \def\dopageno#1{{\rm #1}}
4264 \def\doshortpageno#1{{\rm #1}}
4266 \def\chapentryfonts{\secfonts \rm}
4267 \def\secentryfonts{\textfonts}
4268 \let\subsecentryfonts = \textfonts
4269 \let\subsubsecentryfonts = \textfonts
4272 \message{environments,}
4273 % @foo ... @end foo.
4275 % @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
4277 % Since these characters are used in examples, it should be an even number of
4278 % \tt widths. Each \tt character is 1en, so two makes it 1em.
4281 \def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
4282 \def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
4283 \def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
4284 \def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
4286 % The @error{} command.
4287 % Adapted from the TeXbook's \boxit.
4291 {\tentt \global\dimen0 = 3em}% Width of the box.
4292 \dimen2 = .55pt % Thickness of rules
4293 % The text. (`r' is open on the right, `e' somewhat less so on the left.)
4294 \setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
4296 \global\setbox\errorbox=\hbox to \dimen0{\hfil
4297 \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
4298 \advance\hsize by -2\dimen2 % Rules.
4300 \hrule height\dimen2
4301 \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
4302 \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
4303 \kern3pt\vrule width\dimen2}% Space to right.
4304 \hrule height\dimen2}
4307 \def\error{\leavevmode\lower.7ex\copy\errorbox}
4309 % @tex ... @end tex escapes into raw Tex temporarily.
4310 % One exception: @ is still an escape character, so that @end tex works.
4311 % But \@ or @@ will get a plain tex @ character.
4313 \def\tex{\begingroup
4314 \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
4315 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
4316 \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
4327 \let\bullet=\ptexbullet
4332 \let\equiv=\ptexequiv
4335 \let\indent=\ptexindent
4343 \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
4344 \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
4346 \let\Etex=\endgroup}
4348 % Define @lisp ... @end lisp.
4349 % @lisp does a \begingroup so it can rebind things,
4350 % including the definition of @end lisp (which normally is erroneous).
4352 % Amount to narrow the margins by for @lisp.
4353 \newskip\lispnarrowing \lispnarrowing=0.4in
4355 % This is the definition that ^^M gets inside @lisp, @example, and other
4356 % such environments. \null is better than a space, since it doesn't
4358 \def\lisppar{\null\endgraf}
4360 % Make each space character in the input produce a normal interword
4361 % space in the output. Don't allow a line break at this space, as this
4362 % is used only in environments like @example, where each line of input
4363 % should produce a line of output anyway.
4366 \gdef\sepspaces{\obeyspaces\let =\tie}}
4368 % Define \obeyedspace to be our active space, whatever it is. This is
4369 % for use in \parsearg.
4371 \global\let\obeyedspace= }
4373 % This space is always present above and below environments.
4374 \newskip\envskipamount \envskipamount = 0pt
4376 % Make spacing and below environment symmetrical. We use \parskip here
4377 % to help in doing that, since in @example-like environments \parskip
4378 % is reset to zero; thus the \afterenvbreak inserts no space -- but the
4379 % start of the next paragraph will insert \parskip.
4381 \def\aboveenvbreak{{%
4382 % =10000 instead of <10000 because of a special case in \itemzzz, q.v.
4383 \ifnum \lastpenalty=10000 \else
4384 \advance\envskipamount by \parskip
4386 \ifdim\lastskip<\envskipamount
4388 % it's not a good place to break if the last penalty was \nobreak
4390 \ifnum\lastpenalty>10000 \else \penalty-50 \fi
4391 \vskip\envskipamount
4396 \let\afterenvbreak = \aboveenvbreak
4398 % \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
4399 \let\nonarrowing=\relax
4401 % @cartouche ... @end cartouche: draw rectangle w/rounded corners around
4402 % environment contents.
4403 \font\circle=lcircle10
4405 \newdimen\cartouter\newdimen\cartinner
4406 \newskip\normbskip\newskip\normpskip\newskip\normlskip
4407 \circthick=\fontdimen8\circle
4409 \def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
4410 \def\ctr{{\hskip 6pt\circle\char'010}}
4411 \def\cbl{{\circle\char'012\hskip -6pt}}
4412 \def\cbr{{\hskip 6pt\circle\char'011}}
4413 \def\carttop{\hbox to \cartouter{\hskip\lskip
4414 \ctl\leaders\hrule height\circthick\hfil\ctr
4416 \def\cartbot{\hbox to \cartouter{\hskip\lskip
4417 \cbl\leaders\hrule height\circthick\hfil\cbr
4420 \newskip\lskip\newskip\rskip
4423 \par % can't be in the midst of a paragraph.
4425 \lskip=\leftskip \rskip=\rightskip
4426 \leftskip=0pt\rightskip=0pt %we want these *outside*.
4427 \cartinner=\hsize \advance\cartinner by-\lskip
4428 \advance\cartinner by-\rskip
4430 \advance\cartouter by 18.4pt % allow for 3pt kerns on either
4431 % side, and for 6pt waste from
4432 % each corner char, and rule thickness
4433 \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
4434 % Flag to tell @lisp, etc., not to narrow margin.
4435 \let\nonarrowing=\comment
4437 \baselineskip=0pt\parskip=0pt\lineskip=0pt
4446 \baselineskip=\normbskip
4447 \lineskip=\normlskip
4463 % This macro is called at the beginning of all the @example variants,
4467 \inENV % This group ends at the end of the body
4468 \hfuzz = 12pt % Don't be fussy
4469 \sepspaces % Make spaces be word-separators rather than space tokens.
4470 \let\par = \lisppar % don't ignore blank lines
4471 \obeylines % each line of input is a line of output
4474 \emergencystretch = 0pt % don't try to avoid overfull boxes
4475 % @cartouche defines \nonarrowing to inhibit narrowing
4476 % at next level down.
4477 \ifx\nonarrowing\relax
4478 \advance \leftskip by \lispnarrowing
4479 \exdentamount=\lispnarrowing
4480 \let\exdent=\nofillexdent
4481 \let\nonarrowing=\relax
4485 % Define the \E... control sequence only if we are inside the particular
4486 % environment, so the error checking in \end will work.
4488 % To end an @example-like environment, we first end the paragraph (via
4489 % \afterenvbreak's vertical glue), and then the group. That way we keep
4490 % the zero \parskip that the environments set -- \parskip glue will be
4491 % inserted at the beginning of the next paragraph in the document, after
4494 \def\nonfillfinish{\afterenvbreak\endgroup}
4496 % @lisp: indented, narrowed, typewriter font.
4497 \def\lisp{\begingroup
4499 \let\Elisp = \nonfillfinish
4501 \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
4502 \gobble % eat return
4505 % @example: Same as @lisp.
4506 \def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
4508 % @smallexample and @smalllisp: use smaller fonts.
4509 % Originally contributed by Pavel@xerox.
4510 \def\smalllisp{\begingroup
4511 \def\Esmalllisp{\nonfillfinish\endgroup}%
4512 \def\Esmallexample{\nonfillfinish\endgroup}%
4516 \let\smallexample = \smalllisp
4519 % @display: same as @lisp except keep current font.
4521 \def\display{\begingroup
4523 \let\Edisplay = \nonfillfinish
4527 % @smalldisplay: @display plus smaller fonts.
4529 \def\smalldisplay{\begingroup
4530 \def\Esmalldisplay{\nonfillfinish\endgroup}%
4531 \smallexamplefonts \rm
4535 % @format: same as @display except don't narrow margins.
4537 \def\format{\begingroup
4538 \let\nonarrowing = t
4540 \let\Eformat = \nonfillfinish
4544 % @smallformat: @format plus smaller fonts.
4546 \def\smallformat{\begingroup
4547 \def\Esmallformat{\nonfillfinish\endgroup}%
4548 \smallexamplefonts \rm
4552 % @flushleft (same as @format).
4554 \def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
4558 \def\flushright{\begingroup
4559 \let\nonarrowing = t
4561 \let\Eflushright = \nonfillfinish
4562 \advance\leftskip by 0pt plus 1fill
4567 % @quotation does normal linebreaking (hence we can't use \nonfillstart)
4568 % and narrows the margins.
4571 \begingroup\inENV %This group ends at the end of the @quotation body
4572 {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
4574 % We have retained a nonzero parskip for the environment, since we're
4575 % doing normal filling. So to avoid extra space below the environment...
4576 \def\Equotation{\parskip = 0pt \nonfillfinish}%
4578 % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
4579 \ifx\nonarrowing\relax
4580 \advance\leftskip by \lispnarrowing
4581 \advance\rightskip by \lispnarrowing
4582 \exdentamount = \lispnarrowing
4583 \let\nonarrowing = \relax
4588 % LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
4589 % If we want to allow any <char> as delimiter,
4590 % we need the curly braces so that makeinfo sees the @verb command, eg:
4591 % `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
4593 % [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
4595 % [Knuth] p.344; only we need to do the other characters Texinfo sets
4596 % active too. Otherwise, they get lost as the first character on a
4599 \do\ \do\\\do\{\do\}\do\$\do\&%
4600 \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
4601 \do\<\do\>\do\|\do\@\do+\do\"%
4605 \def\uncatcodespecials{%
4606 \def\do##1{\catcode`##1=12}\dospecials}
4608 % [Knuth] pp. 380,381,391
4609 % Disable Spanish ligatures ?` and !` of \tt font
4611 \catcode`\`=\active\gdef`{\relax\lq}
4614 % Setup for the @verb command.
4616 % Eight spaces for a tab
4618 \catcode`\^^I=\active
4619 \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
4623 \tt % easiest (and conventionally used) font for verbatim
4624 \def\par{\leavevmode\endgraf}%
4627 % Respect line breaks,
4628 % print special symbols as themselves, and
4629 % make each space count
4630 % must do in this order:
4631 \obeylines \uncatcodespecials \sepspaces
4634 % Setup for the @verbatim environment
4636 % Real tab expansion
4637 \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
4639 \def\starttabbox{\setbox0=\hbox\bgroup}
4641 \catcode`\^^I=\active
4643 \catcode`\^^I=\active
4644 \def^^I{\leavevmode\egroup
4645 \dimen0=\wd0 % the width so far, or since the previous tab
4646 \divide\dimen0 by\tabw
4647 \multiply\dimen0 by\tabw % compute previous multiple of \tabw
4648 \advance\dimen0 by\tabw % advance to next multiple of \tabw
4649 \wd0=\dimen0 \box0 \starttabbox
4653 \def\setupverbatim{%
4654 % Easiest (and conventionally used) font for verbatim
4656 \def\par{\leavevmode\egroup\box0\endgraf}%
4659 % Respect line breaks,
4660 % print special symbols as themselves, and
4661 % make each space count
4662 % must do in this order:
4663 \obeylines \uncatcodespecials \sepspaces
4664 \everypar{\starttabbox}%
4667 % Do the @verb magic: verbatim text is quoted by unique
4668 % delimiter characters. Before first delimiter expect a
4669 % right brace, after last delimiter expect closing brace:
4671 % \def\doverb'{'<char>#1<char>'}'{#1}
4673 % [Knuth] p. 382; only eat outer {}
4675 \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
4676 \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
4679 \def\verb{\begingroup\setupverb\doverb}
4682 % Do the @verbatim magic: define the macro \doverbatim so that
4683 % the (first) argument ends when '@end verbatim' is reached, ie:
4685 % \def\doverbatim#1@end verbatim{#1}
4687 % For Texinfo it's a lot easier than for LaTeX,
4688 % because texinfo's \verbatim doesn't stop at '\end{verbatim}':
4689 % we need not redefine '\', '{' and '}'.
4691 % Inspired by LaTeX's verbatim command set [latex.ltx]
4692 %% Include LaTeX hack for completeness -- never know
4694 %% \catcode`|=0 \catcode`[=1
4695 %% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
4696 %% \catcode`\\=12|gdef|doverbatim#1@end verbatim[
4697 %% #1|endgroup|def|Everbatim[]|end[verbatim]]
4703 % ignore everything up to the first ^^M, that's the newline at the end
4704 % of the @verbatim input line itself. Otherwise we get an extra blank
4705 % line in the output.
4706 \gdef\doverbatim#1^^M#2@end verbatim{#2\end{verbatim}}%
4710 \def\Everbatim{\nonfillfinish\endgroup}%
4713 \advance\leftskip by -\defbodyindent
4714 \begingroup\setupverbatim\doverbatim
4717 % @verbatiminclude FILE - insert text of file in verbatim environment.
4719 % Allow normal characters that we make active in the argument (a file name).
4720 \def\verbatiminclude{%
4730 \parsearg\doverbatiminclude
4732 \def\setupverbatiminclude{%
4735 \advance\leftskip by -\defbodyindent
4736 \begingroup\setupverbatim
4739 \def\doverbatiminclude#1{%
4740 % Restore active chars for included file.
4743 \let\value=\expandablevalue
4745 \expandafter\expandafter\setupverbatiminclude\input\thisfile
4751 % @copying ... @end copying.
4752 % Save the text away for @insertcopying later. Many commands won't be
4753 % allowed in this context, but that's ok.
4755 % We save the uninterpreted tokens, rather than creating a box.
4756 % Saving the text in a box would be much easier, but then all the
4757 % typesetting commands (@smallbook, font changes, etc.) have to be done
4758 % beforehand -- and a) we want @copying to be done first in the source
4759 % file; b) letting users define the frontmatter in as flexible order as
4760 % possible is very desirable.
4762 \def\copying{\begingroup
4763 % Define a command to swallow text until we reach `@end copying'.
4764 % \ is the escape char in this texinfo.tex file, so it is the
4765 % delimiter for the command; @ will be the escape char when we read
4766 % it, but that doesn't matter.
4767 \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}%
4769 % We must preserve ^^M's in the input file; see \insertcopying below.
4770 \catcode`\^^M = \active
4774 % What we do to finish off the copying text.
4776 \def\enddocopying{\endgroup\ignorespaces}
4778 % @insertcopying. Here we must play games with ^^M's. On the one hand,
4779 % we need them to delimit commands such as `@end quotation', so they
4780 % must be active. On the other hand, we certainly don't want every
4781 % end-of-line to be a \par, as would happen with the normal active
4782 % definition of ^^M. On the third hand, two ^^M's in a row should still
4785 % Our approach is to make ^^M insert a space and a penalty1 normally;
4786 % then it can also check if \lastpenalty=1. If it does, then manually
4789 % This messes up the normal definitions of @c[omment], so we redefine
4790 % it. Similarly for @ignore. (These commands are used in the gcc
4791 % manual for man page generation.)
4793 % Seems pretty fragile, most line-oriented commands will presumably
4794 % fail, but for the limited use of getting the copying text (which
4795 % should be quite simple) inserted, we can hope it's ok.
4797 {\catcode`\^^M=\active %
4798 \gdef\insertcopying{\begingroup %
4799 \parindent = 0pt % looks wrong on title page
4801 \ifnum \lastpenalty=1 %
4808 % Fix @c[omment] for catcode 13 ^^M's.
4809 \def\c##1^^M{\ignorespaces}%
4812 % Don't bother jumping through all the hoops that \doignore does, it
4813 % would be very hard since the catcodes are already set.
4814 \long\def\ignore##1\end ignore{\ignorespaces}%
4823 % Allow user to change definition object font (\df) internally
4824 \def\setdeffont#1 {\csname DEF#1\endcsname}
4826 \newskip\defbodyindent \defbodyindent=.4in
4827 \newskip\defargsindent \defargsindent=50pt
4828 \newskip\deflastargmargin \deflastargmargin=18pt
4830 \newcount\parencount
4832 % We want ()&[] to print specially on the defun line.
4835 \catcode`\(=\active \catcode`\)=\active
4837 \catcode`\[=\active \catcode`\]=\active
4840 % Make control sequences which act like normal parenthesis chars.
4841 \let\lparen = ( \let\rparen = )
4843 {\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
4845 % Be sure that we always have a definition for `(', etc. For example,
4846 % if the fn name has parens in it, \boldbrax will not be in effect yet,
4847 % so TeX would otherwise complain about undefined control sequence.
4848 \global\let(=\lparen \global\let)=\rparen
4849 \global\let[=\lbrack \global\let]=\rbrack
4851 \gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
4852 \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
4853 % This is used to turn on special parens
4854 % but make & act ordinary (given that it's active).
4855 \gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
4857 % Definitions of (, ) and & used in args for functions.
4858 % This is the definition of ( outside of all parentheses.
4859 \gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
4860 \global\advance\parencount by 1
4863 % This is the definition of ( when already inside a level of parens.
4864 \gdef\opnested{\char`\(\global\advance\parencount by 1 }
4866 \gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
4867 % also in that case restore the outer-level definition of (.
4868 \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
4869 \global\advance \parencount by -1 }
4870 % If we encounter &foo, then turn on ()-hacking afterwards
4871 \gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
4873 \gdef\normalparens{\boldbrax\let&=\ampnr}
4874 } % End of definition inside \activeparens
4875 %% These parens (in \boldbrax) actually are a little bolder than the
4876 %% contained text. This is especially needed for [ and ]
4877 \def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
4878 \def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
4880 \def\lbrb{{\bf\char`\[}}
4881 \def\rbrb{{\bf\char`\]}}
4883 % Active &'s sneak into the index arguments, so make sure it's defined.
4885 \catcode`& = \active
4886 \global\let& = \ampnr
4889 % \defname, which formats the name of the @def (not the args).
4890 % #1 is the function name.
4891 % #2 is the type of definition, such as "Function".
4894 % How we'll output the type name. Putting it in brackets helps
4895 % distinguish it from the body text that may end up on the next line
4900 \def\defnametype{[\rm #2]}%
4903 % Get the values of \leftskip and \rightskip as they were outside the @def...
4905 \advance\dimen2 by -\defbodyindent
4907 % Figure out values for the paragraph shape.
4908 \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}%
4909 \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
4910 \dimen1=\hsize \advance \dimen1 by -\defargsindent % size for continuations
4911 \parshape 2 0in \dimen0 \defargsindent \dimen1
4913 % Output arg 2 ("Function" or some such) but stuck inside a box of
4914 % width 0 so it does not interfere with linebreaking.
4917 {% Adjust \hsize to exclude the ambient margins,
4918 % so that \rightline will obey them.
4919 \advance \hsize by -\dimen2
4920 \dimen3 = 0pt % was -1.25pc
4921 \rlap{\rightline{\defnametype\kern\dimen3}}%
4924 % Allow all lines to be underfull without complaint:
4925 \tolerance=10000 \hbadness=10000
4926 \advance\leftskip by -\defbodyindent
4927 \exdentamount=\defbodyindent
4928 {\df #1}\enskip % output function name
4929 % \defunargs will be called next to output the arguments, if any.
4932 % Common pieces to start any @def...
4933 % #1 is the \E... control sequence to end the definition (which we define).
4934 % #2 is the \...x control sequence (which our caller defines).
4935 % #3 is the control sequence to process the header, such as \defunheader.
4937 \def\parsebodycommon#1#2#3{%
4939 % If there are two @def commands in a row, we'll have a \nobreak,
4940 % which is there to keep the function description together with its
4941 % header. But if there's nothing but headers, we want to allow a
4942 % break after all. Check for penalty 10002 (inserted by
4943 % \defargscommonending) instead of 10000, since the sectioning
4944 % commands insert a \penalty10000, and we don't want to allow a break
4945 % between a section heading and a defun.
4946 \ifnum\lastpenalty=10002 \penalty0 \fi
4949 % Define the \E... end token that this defining construct specifies
4950 % so that it will exit this group.
4951 \def#1{\endgraf\endgroup\medbreak}%
4954 \advance\leftskip by \defbodyindent
4955 \exdentamount=\defbodyindent
4958 % Common part of the \...x definitions.
4960 \def\defxbodycommon{%
4961 % As with \parsebodycommon above, allow line break if we have multiple
4962 % x headers in a row. It's not a great place, though.
4963 \ifnum\lastpenalty=10000 \penalty1000 \fi
4965 \begingroup\obeylines
4968 % Process body of @defun, @deffn, @defmac, etc.
4970 \def\defparsebody#1#2#3{%
4971 \parsebodycommon{#1}{#2}{#3}%
4972 \def#2{\defxbodycommon \activeparens \spacesplit#3}%
4973 \catcode\equalChar=\active
4974 \begingroup\obeylines\activeparens
4978 % #1, #2, #3 are the common arguments (see \parsebodycommon above).
4979 % #4, delimited by the space, is the class name.
4981 \def\defmethparsebody#1#2#3#4 {%
4982 \parsebodycommon{#1}{#2}{#3}%
4983 \def#2##1 {\defxbodycommon \activeparens \spacesplit{#3{##1}}}%
4984 \begingroup\obeylines\activeparens
4985 % The \empty here prevents misinterpretation of a construct such as
4986 % @deffn {whatever} {Enharmonic comma}
4987 % See comments at \deftpparsebody, although in our case we don't have
4988 % to remove the \empty afterwards, since it is empty.
4989 \spacesplit{#3{#4}}\empty
4992 % Used for @deftypemethod and @deftypeivar.
4993 % #1, #2, #3 are the common arguments (see \defparsebody).
4994 % #4, delimited by a space, is the class name.
4995 % #5 is the method's return type.
4997 \def\deftypemethparsebody#1#2#3#4 #5 {%
4998 \parsebodycommon{#1}{#2}{#3}%
4999 \def#2##1 ##2 {\defxbodycommon \activeparens \spacesplit{#3{##1}{##2}}}%
5000 \begingroup\obeylines\activeparens
5001 \spacesplit{#3{#4}{#5}}%
5004 % Used for @deftypeop. The change from \deftypemethparsebody is an
5005 % extra argument at the beginning which is the `category', instead of it
5006 % being the hardwired string `Method' or `Instance Variable'. We have
5007 % to account for this both in the \...x definition and in parsing the
5008 % input at hand. Thus also need a control sequence (passed as #5) for
5009 % the \E... definition to assign the category name to.
5011 \def\deftypeopparsebody#1#2#3#4#5 #6 {%
5012 \parsebodycommon{#1}{#2}{#3}%
5013 \def#2##1 ##2 ##3 {\def#4{##1}%
5014 \defxbodycommon \activeparens \spacesplit{#3{##2}{##3}}}%
5015 \begingroup\obeylines\activeparens
5016 \spacesplit{#3{#5}{#6}}%
5020 \def\defopparsebody #1#2#3#4#5 {%
5021 \parsebodycommon{#1}{#2}{#3}%
5022 \def#2##1 ##2 {\def#4{##1}%
5023 \defxbodycommon \activeparens \spacesplit{#3{##2}}}%
5024 \begingroup\obeylines\activeparens
5025 \spacesplit{#3{#5}}%
5028 % These parsing functions are similar to the preceding ones
5029 % except that they do not make parens into active characters.
5030 % These are used for "variables" since they have no arguments.
5032 \def\defvarparsebody #1#2#3{%
5033 \parsebodycommon{#1}{#2}{#3}%
5034 \def#2{\defxbodycommon \spacesplit#3}%
5035 \catcode\equalChar=\active
5036 \begingroup\obeylines
5041 \def\defopvarparsebody #1#2#3#4#5 {%
5042 \parsebodycommon{#1}{#2}{#3}%
5043 \def#2##1 ##2 {\def#4{##1}%
5044 \defxbodycommon \spacesplit{#3{##2}}}%
5045 \begingroup\obeylines
5046 \spacesplit{#3{#5}}%
5049 \def\defvrparsebody#1#2#3#4 {%
5050 \parsebodycommon{#1}{#2}{#3}%
5051 \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
5052 \begingroup\obeylines
5053 \spacesplit{#3{#4}}%
5056 % This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
5057 % type is just `struct', because we lose the braces in `{struct
5058 % termios}' when \spacesplit reads its undelimited argument. Sigh.
5059 % \let\deftpparsebody=\defvrparsebody
5061 % So, to get around this, we put \empty in with the type name. That
5062 % way, TeX won't find exactly `{...}' as an undelimited argument, and
5063 % won't strip off the braces.
5065 \def\deftpparsebody #1#2#3#4 {%
5066 \parsebodycommon{#1}{#2}{#3}%
5067 \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
5068 \begingroup\obeylines
5069 \spacesplit{\parsetpheaderline{#3{#4}}}\empty
5072 % Fine, but then we have to eventually remove the \empty *and* the
5073 % braces (if any). That's what this does.
5075 \def\removeemptybraces\empty#1\relax{#1}
5077 % After \spacesplit has done its work, this is called -- #1 is the final
5078 % thing to call, #2 the type name (which starts with \empty), and #3
5079 % (which might be empty) the arguments.
5081 \def\parsetpheaderline#1#2#3{%
5082 #1{\removeemptybraces#2\relax}{#3}%
5085 % Split up #2 (the rest of the input line) at the first space token.
5086 % call #1 with two arguments:
5087 % the first is all of #2 before the space token,
5088 % the second is all of #2 after that space token.
5089 % If #2 contains no space token, all of it is passed as the first arg
5090 % and the second is passed as empty.
5093 \gdef\spacesplit#1#2^^M{\endgroup\spacesplitx{#1}#2 \relax\spacesplitx}%
5094 \long\gdef\spacesplitx#1#2 #3#4\spacesplitx{%
5104 % This is called to end the arguments processing for all the @def... commands.
5106 \def\defargscommonending{%
5107 \interlinepenalty = 10000
5108 \advance\rightskip by 0pt plus 1fil
5110 \nobreak\vskip -\parskip
5111 \penalty 10002 % signal to \parsebodycommon.
5114 % This expands the args and terminates the paragraph they comprise.
5116 \def\defunargs#1{\functionparens \sl
5117 % Expand, preventing hyphenation at `-' chars.
5118 % Note that groups don't affect changes in \hyphenchar.
5119 % Set the font temporarily and use \font in case \setfont made \tensl a macro.
5120 {\tensl\hyphenchar\font=0}%
5122 {\tensl\hyphenchar\font=45}%
5123 \ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
5124 \defargscommonending
5127 \def\deftypefunargs #1{%
5128 % Expand, preventing hyphenation at `-' chars.
5129 % Note that groups don't affect changes in \hyphenchar.
5130 % Use \boldbraxnoamp, not \functionparens, so that & is not special.
5132 \tclose{#1}% avoid \code because of side effects on active chars
5133 \defargscommonending
5136 % Do complete processing of one @defun or @defunx line already parsed.
5138 % @deffn Command forward-char nchars
5140 \def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
5142 \def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
5143 \begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
5144 \catcode\equalChar=\other % Turn off change made in \defparsebody
5147 % @defun == @deffn Function
5149 \def\defun{\defparsebody\Edefun\defunx\defunheader}
5151 \def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
5152 \begingroup\defname {#1}{\putwordDeffunc}%
5153 \defunargs {#2}\endgroup %
5154 \catcode\equalChar=\other % Turn off change made in \defparsebody
5157 % @deftypefun int foobar (int @var{foo}, float @var{bar})
5159 \def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
5161 % #1 is the data type. #2 is the name and args.
5162 \def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
5163 % #1 is the data type, #2 the name, #3 the args.
5164 \def\deftypefunheaderx #1#2 #3\relax{%
5165 \doind {fn}{\code{#2}}% Make entry in function index
5166 \begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}%
5167 \deftypefunargs {#3}\endgroup %
5168 \catcode\equalChar=\other % Turn off change made in \defparsebody
5171 % @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
5173 \def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
5175 % \defheaderxcond#1\relax$.$
5176 % puts #1 in @code, followed by a space, but does nothing if #1 is null.
5177 \def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi}
5179 % #1 is the classification. #2 is the data type. #3 is the name and args.
5180 \def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
5181 % #1 is the classification, #2 the data type, #3 the name, #4 the args.
5182 \def\deftypefnheaderx #1#2#3 #4\relax{%
5183 \doind {fn}{\code{#3}}% Make entry in function index
5185 \normalparens % notably, turn off `&' magic, which prevents
5186 % at least some C++ text from working
5187 \defname {\defheaderxcond#2\relax$.$#3}{#1}%
5188 \deftypefunargs {#4}\endgroup %
5189 \catcode\equalChar=\other % Turn off change made in \defparsebody
5192 % @defmac == @deffn Macro
5194 \def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
5196 \def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
5197 \begingroup\defname {#1}{\putwordDefmac}%
5198 \defunargs {#2}\endgroup %
5199 \catcode\equalChar=\other % Turn off change made in \defparsebody
5202 % @defspec == @deffn Special Form
5204 \def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
5206 \def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
5207 \begingroup\defname {#1}{\putwordDefspec}%
5208 \defunargs {#2}\endgroup %
5209 \catcode\equalChar=\other % Turn off change made in \defparsebody
5212 % @defop CATEGORY CLASS OPERATION ARG...
5214 \def\defop #1 {\def\defoptype{#1}%
5215 \defopparsebody\Edefop\defopx\defopheader\defoptype}
5217 \def\defopheader#1#2#3{%
5218 \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% function index entry
5220 \defname{#2}{\defoptype\ \putwordon\ #1}%
5225 % @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
5227 \def\deftypeop #1 {\def\deftypeopcategory{#1}%
5228 \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
5231 % #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
5232 \def\deftypeopheader#1#2#3#4{%
5233 \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
5235 \defname{\defheaderxcond#2\relax$.$#3}
5236 {\deftypeopcategory\ \putwordon\ \code{#1}}%
5237 \deftypefunargs{#4}%
5241 % @deftypemethod CLASS TYPE METHOD ARG...
5243 \def\deftypemethod{%
5244 \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
5246 % #1 is the class name, #2 the data type, #3 the method name, #4 the args.
5247 \def\deftypemethodheader#1#2#3#4{%
5248 \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
5250 \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}%
5251 \deftypefunargs{#4}%
5255 % @deftypeivar CLASS TYPE VARNAME
5258 \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
5260 % #1 is the class name, #2 the data type, #3 the variable name.
5261 \def\deftypeivarheader#1#2#3{%
5262 \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
5264 \defname{\defheaderxcond#2\relax$.$#3}
5265 {\putwordInstanceVariableof\ \code{#1}}%
5270 % @defmethod == @defop Method
5272 \def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
5274 % #1 is the class name, #2 the method name, #3 the args.
5275 \def\defmethodheader#1#2#3{%
5276 \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
5278 \defname{#2}{\putwordMethodon\ \code{#1}}%
5283 % @defcv {Class Option} foo-class foo-flag
5285 \def\defcv #1 {\def\defcvtype{#1}%
5286 \defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
5288 \def\defcvarheader #1#2#3{%
5289 \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% variable index entry
5291 \defname{#2}{\defcvtype\ \putwordof\ #1}%
5296 % @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
5298 \def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
5300 \def\defivarheader#1#2#3{%
5301 \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% entry in var index
5303 \defname{#2}{\putwordInstanceVariableof\ #1}%
5309 % First, define the processing that is wanted for arguments of @defvar.
5310 % This is actually simple: just print them in roman.
5311 % This must expand the args and terminate the paragraph they make up
5312 \def\defvarargs #1{\normalparens #1%
5313 \defargscommonending
5316 % @defvr Counter foo-count
5318 \def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
5320 \def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
5321 \begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
5323 % @defvar == @defvr Variable
5325 \def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
5327 \def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
5328 \begingroup\defname {#1}{\putwordDefvar}%
5329 \defvarargs {#2}\endgroup %
5332 % @defopt == @defvr {User Option}
5334 \def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
5336 \def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
5337 \begingroup\defname {#1}{\putwordDefopt}%
5338 \defvarargs {#2}\endgroup %
5341 % @deftypevar int foobar
5343 \def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
5345 % #1 is the data type. #2 is the name, perhaps followed by text that
5346 % is actually part of the data type, which should not be put into the index.
5347 \def\deftypevarheader #1#2{%
5348 \dovarind#2 \relax% Make entry in variables index
5349 \begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}%
5350 \defargscommonending
5352 \def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
5354 % @deftypevr {Global Flag} int enable
5356 \def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
5358 \def\deftypevrheader #1#2#3{\dovarind#3 \relax%
5359 \begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1}
5360 \defargscommonending
5364 % Args are printed in bold, a slight difference from @defvar.
5366 \def\deftpargs #1{\bf \defvarargs{#1}}
5368 % @deftp Class window height width ...
5370 \def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
5372 \def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
5373 \begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
5375 % These definitions are used if you use @defunx (etc.)
5376 % anywhere other than immediately after a @defun or @defunx.
5378 \def\defcvx#1 {\errmessage{@defcvx in invalid context}}
5379 \def\deffnx#1 {\errmessage{@deffnx in invalid context}}
5380 \def\defivarx#1 {\errmessage{@defivarx in invalid context}}
5381 \def\defmacx#1 {\errmessage{@defmacx in invalid context}}
5382 \def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
5383 \def\defoptx #1 {\errmessage{@defoptx in invalid context}}
5384 \def\defopx#1 {\errmessage{@defopx in invalid context}}
5385 \def\defspecx#1 {\errmessage{@defspecx in invalid context}}
5386 \def\deftpx#1 {\errmessage{@deftpx in invalid context}}
5387 \def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
5388 \def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
5389 \def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
5390 \def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
5391 \def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
5392 \def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
5393 \def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
5394 \def\defunx#1 {\errmessage{@defunx in invalid context}}
5395 \def\defvarx#1 {\errmessage{@defvarx in invalid context}}
5396 \def\defvrx#1 {\errmessage{@defvrx in invalid context}}
5402 % To do this right we need a feature of e-TeX, \scantokens,
5403 % which we arrange to emulate with a temporary file in ordinary TeX.
5404 \ifx\eTeXversion\undefined
5405 \newwrite\macscribble
5407 \begingroup \newlinechar`\^^M
5408 % Undo catcode changes of \startcontents and \doprintindex
5409 \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
5410 % Append \endinput to make sure that TeX does not see the ending newline.
5411 \toks0={#1\endinput}%
5412 \immediate\openout\macscribble=\jobname.tmp
5413 \immediate\write\macscribble{\the\toks0}%
5414 \immediate\closeout\macscribble
5415 \let\xeatspaces\eatspaces
5421 \begingroup \newlinechar`\^^M
5422 % Undo catcode changes of \startcontents and \doprintindex
5423 \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
5424 \let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
5427 \newcount\paramno % Count of parameters
5428 \newtoks\macname % Macro name
5429 \newif\ifrecursive % Is it recursive?
5430 \def\macrolist{} % List of all defined macros in the form
5431 % \do\macro1\do\macro2...
5434 % Thisdoes \let #1 = #2, except with \csnames.
5436 \expandafter\expandafter
5438 \expandafter\expandafter
5440 \csname#2\endcsname}
5442 % Trim leading and trailing spaces off a string.
5443 % Concepts from aro-bend problem 15 (see CTAN).
5445 \gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
5446 \gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
5447 \gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
5449 \unbrace{\gdef\trim@@@ #1 } #2@{#1}
5452 % Trim a single trailing ^^M off a string.
5453 {\catcode`\^^M=\other \catcode`\Q=3%
5454 \gdef\eatcr #1{\eatcra #1Q^^MQ}%
5455 \gdef\eatcra#1^^MQ{\eatcrb#1Q}%
5456 \gdef\eatcrb#1Q#2Q{#1}%
5459 % Macro bodies are absorbed as an argument in a context where
5460 % all characters are catcode 10, 11 or 12, except \ which is active
5461 % (as in normal texinfo). It is necessary to change the definition of \.
5463 % It's necessary to have hard CRs when the macro is executed. This is
5464 % done by making ^^M (\endlinechar) catcode 12 when reading the macro
5465 % body, and then making it the \newlinechar in \scanmacro.
5467 \def\macrobodyctxt{%
5478 \catcode`\^^M=\other
5492 % \mbodybackslash is the definition of \ in @macro bodies.
5493 % It maps \foo\ => \csname macarg.foo\endcsname => #N
5494 % where N is the macro parameter number.
5495 % We define \csname macarg.\endcsname to be \realbackslash, so
5496 % \\ in macro replacement text gets you a backslash.
5498 {\catcode`@=0 @catcode`@\=@active
5499 @gdef@usembodybackslash{@let\=@mbodybackslash}
5500 @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
5502 \expandafter\def\csname macarg.\endcsname{\realbackslash}
5504 \def\macro{\recursivefalse\parsearg\macroxxx}
5505 \def\rmacro{\recursivetrue\parsearg\macroxxx}
5508 \getargs{#1}% now \macname is the macname and \argl the arglist
5509 \ifx\argl\empty % no arguments
5512 \expandafter\parsemargdef \argl;%
5514 \if1\csname ismacro.\the\macname\endcsname
5515 \message{Warning: redefining \the\macname}%
5517 \expandafter\ifx\csname \the\macname\endcsname \relax
5518 \else \errmessage{Macro name \the\macname\space already defined}\fi
5519 \global\cslet{macsave.\the\macname}{\the\macname}%
5520 \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
5521 % Add the macroname to \macrolist
5522 \toks0 = \expandafter{\macrolist\do}%
5523 \xdef\macrolist{\the\toks0
5524 \expandafter\noexpand\csname\the\macname\endcsname}%
5526 \begingroup \macrobodyctxt
5527 \ifrecursive \expandafter\parsermacbody
5528 \else \expandafter\parsemacbody
5531 \def\unmacro{\parsearg\dounmacro}
5533 \if1\csname ismacro.#1\endcsname
5534 \global\cslet{#1}{macsave.#1}%
5535 \global\expandafter\let \csname ismacro.#1\endcsname=0%
5536 % Remove the macro name from \macrolist:
5538 \expandafter\let\csname#1\endcsname \relax
5540 \xdef\macrolist{\macrolist}%
5543 \errmessage{Macro #1 not defined}%
5547 % Called by \do from \dounmacro on each macro. The idea is to omit any
5548 % macro definitions that have been changed to \relax.
5554 \noexpand\do \noexpand #1%
5558 % This makes use of the obscure feature that if the last token of a
5559 % <parameter list> is #, then the preceding argument is delimited by
5560 % an opening brace, and that opening brace is not consumed.
5561 \def\getargs#1{\getargsxxx#1{}}
5562 \def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
5563 \def\getmacname #1 #2\relax{\macname={#1}}
5564 \def\getmacargs#1{\def\argl{#1}}
5566 % Parse the optional {params} list. Set up \paramno and \paramlist
5567 % so \defmacro knows what to do. Define \macarg.blah for each blah
5568 % in the params list, to be ##N where N is the position in that list.
5569 % That gets used by \mbodybackslash (above).
5571 % We need to get `macro parameter char #' into several definitions.
5572 % The technique used is stolen from LaTeX: let \hash be something
5573 % unexpandable, insert that wherever you need a #, and then redefine
5574 % it to # just before using the token list produced.
5576 % The same technique is used to protect \eatspaces till just before
5577 % the macro is used.
5579 \def\parsemargdef#1;{\paramno=0\def\paramlist{}%
5580 \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
5581 \def\parsemargdefxxx#1,{%
5582 \if#1;\let\next=\relax
5583 \else \let\next=\parsemargdefxxx
5584 \advance\paramno by 1%
5585 \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
5586 {\xeatspaces{\hash\the\paramno}}%
5587 \edef\paramlist{\paramlist\hash\the\paramno,}%
5590 % These two commands read recursive and nonrecursive macro bodies.
5591 % (They're different since rec and nonrec macros end differently.)
5593 \long\def\parsemacbody#1@end macro%
5594 {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5595 \long\def\parsermacbody#1@end rmacro%
5596 {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
5598 % This defines the macro itself. There are six cases: recursive and
5599 % nonrecursive macros of zero, one, and many arguments.
5600 % Much magic with \expandafter here.
5601 % \xdef is used so that macro definitions will survive the file
5602 % they're defined in; @include reads the file inside a group.
5604 \let\hash=##% convert placeholders to macro parameter chars
5608 \expandafter\xdef\csname\the\macname\endcsname{%
5609 \noexpand\scanmacro{\temp}}%
5611 \expandafter\xdef\csname\the\macname\endcsname{%
5612 \bgroup\noexpand\macroargctxt
5613 \noexpand\braceorline
5614 \expandafter\noexpand\csname\the\macname xxx\endcsname}%
5615 \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5616 \egroup\noexpand\scanmacro{\temp}}%
5618 \expandafter\xdef\csname\the\macname\endcsname{%
5619 \bgroup\noexpand\macroargctxt
5620 \noexpand\csname\the\macname xx\endcsname}%
5621 \expandafter\xdef\csname\the\macname xx\endcsname##1{%
5622 \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5623 \expandafter\expandafter
5625 \expandafter\expandafter
5626 \csname\the\macname xxx\endcsname
5627 \paramlist{\egroup\noexpand\scanmacro{\temp}}%
5632 \expandafter\xdef\csname\the\macname\endcsname{%
5633 \noexpand\norecurse{\the\macname}%
5634 \noexpand\scanmacro{\temp}\egroup}%
5636 \expandafter\xdef\csname\the\macname\endcsname{%
5637 \bgroup\noexpand\macroargctxt
5638 \noexpand\braceorline
5639 \expandafter\noexpand\csname\the\macname xxx\endcsname}%
5640 \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
5642 \noexpand\norecurse{\the\macname}%
5643 \noexpand\scanmacro{\temp}\egroup}%
5645 \expandafter\xdef\csname\the\macname\endcsname{%
5646 \bgroup\noexpand\macroargctxt
5647 \expandafter\noexpand\csname\the\macname xx\endcsname}%
5648 \expandafter\xdef\csname\the\macname xx\endcsname##1{%
5649 \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
5650 \expandafter\expandafter
5652 \expandafter\expandafter
5653 \csname\the\macname xxx\endcsname
5656 \noexpand\norecurse{\the\macname}%
5657 \noexpand\scanmacro{\temp}\egroup}%
5661 \def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
5663 % \braceorline decides whether the next nonwhitespace character is a
5664 % {. If so it reads up to the closing }, if not, it reads the whole
5665 % line. Whatever was read is then fed to the next control sequence
5666 % as an argument (by \parsebrace or \parsearg)
5667 \def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
5668 \def\braceorlinexxx{%
5669 \ifx\nchar\bgroup\else
5670 \expandafter\parsearg
5673 % We mant to disable all macros during \shipout so that they are not
5674 % expanded by \write.
5675 \def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
5676 \edef\next{\macrolist}\expandafter\endgroup\next}
5680 % We need some trickery to remove the optional spaces around the equal
5681 % sign. Just make them active and then expand them all to nothing.
5682 \def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
5683 \def\aliasxxx #1{\aliasyyy#1\relax}
5684 \def\aliasyyy #1=#2\relax{\ignoreactivespaces
5685 \edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
5686 \expandafter\noexpand\csname#2\endcsname}%
5687 \expandafter\endgroup\next}
5690 \message{cross references,}
5695 \newif\ifhavexrefs % True if xref values are known.
5696 \newif\ifwarnedxrefs % True if we warned once that they aren't known.
5698 % @inforef is relatively simple.
5699 \def\inforef #1{\inforefzzz #1,,,,**}
5700 \def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
5701 node \samp{\ignorespaces#1{}}}
5703 % @node's job is to define \lastnode.
5704 \def\node{\ENVcheck\parsearg\nodezzz}
5705 \def\nodezzz#1{\nodexxx #1,\finishnodeparse}
5706 \def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
5708 \let\lastnode=\relax
5710 % The sectioning commands (@chapter, etc.) call these.
5712 \ifx\lastnode\relax\else
5713 \expandafter\expandafter\expandafter\setref{\lastnode}%
5714 {Ysectionnumberandtype}%
5715 \global\let\lastnode=\relax
5718 \def\unnumbnoderef{%
5719 \ifx\lastnode\relax\else
5720 \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
5721 \global\let\lastnode=\relax
5724 \def\appendixnoderef{%
5725 \ifx\lastnode\relax\else
5726 \expandafter\expandafter\expandafter\setref{\lastnode}%
5727 {Yappendixletterandtype}%
5728 \global\let\lastnode=\relax
5733 % @anchor{NAME} -- define xref target at arbitrary point.
5735 \newcount\savesfregister
5736 \gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
5737 \gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
5738 \gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
5740 % \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
5741 % anchor), namely NAME-title (the corresponding @chapter/etc. name),
5742 % NAME-pg (the page number), and NAME-snt (section number and type).
5743 % Called from \foonoderef.
5745 % We have to set \indexdummies so commands such as @code in a section
5746 % title aren't expanded. It would be nicer not to expand the titles in
5747 % the first place, but there's so many layers that that is hard to do.
5749 % Likewise, use \turnoffactive so that punctuation chars such as underscore
5750 % and backslash work in node names.
5757 \dosetq{#1-title}{Ytitle}%
5758 \dosetq{#1-pg}{Ypagenumber}%
5759 \dosetq{#1-snt}{#2}%
5762 % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
5763 % the node name, #2 the name of the Info cross-reference, #3 the printed
5764 % node name, #4 the name of the Info file, #5 the name of the printed
5765 % manual. All but the node name can be omitted.
5767 \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
5768 \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
5769 \def\ref#1{\xrefX[#1,,,,,,,]}
5770 \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
5772 \def\printedmanual{\ignorespaces #5}%
5773 \def\printednodename{\ignorespaces #3}%
5774 \setbox1=\hbox{\printedmanual}%
5775 \setbox0=\hbox{\printednodename}%
5777 % No printed node name was explicitly given.
5778 \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
5779 % Use the node name inside the square brackets.
5780 \def\printednodename{\ignorespaces #1}%
5782 % Use the actual chapter/section title appear inside
5783 % the square brackets. Use the real section title if we have it.
5785 % It is in another manual, so we don't have it.
5786 \def\printednodename{\ignorespaces #1}%
5789 % We know the real title if we have the xref values.
5790 \def\printednodename{\refx{#1-title}{}}%
5792 % Otherwise just copy the Info node name.
5793 \def\printednodename{\ignorespaces #1}%
5799 % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
5800 % insert empty discretionaries after hyphens, which means that it will
5801 % not find a line break at a hyphen in a node names. Since some manuals
5802 % are best written with fairly long node names, containing hyphens, this
5803 % is a loss. Therefore, we give the text of the node name again, so it
5804 % is as if TeX is seeing it for the first time.
5808 {\turnoffactive \otherbackslash
5809 \ifnum\filenamelength>0
5810 \startlink attr{/Border [0 0 0]}%
5811 goto file{\the\filename.pdf} name{#1}%
5813 \startlink attr{/Border [0 0 0]}%
5814 goto name{\pdfmkpgn{#1}}%
5821 \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
5823 % _ (for example) has to be the character _ for the purposes of the
5824 % control sequence corresponding to the node, but it has to expand
5825 % into the usual \leavevmode...\vrule stuff for purposes of
5826 % printing. So we \turnoffactive for the \refx-snt, back on for the
5827 % printing, back off for the \refx-pg.
5828 {\turnoffactive \otherbackslash
5829 % Only output a following space if the -snt ref is nonempty; for
5830 % @unnumbered and @anchor, it won't be.
5831 \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
5832 \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
5834 % output the `[mynode]' via a macro.
5835 \xrefprintnodename\printednodename
5837 % But we always want a comma and a space:
5840 % output the `page 3'.
5841 \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
5846 % This macro is called from \xrefX for the `[nodename]' part of xref
5847 % output. It's a separate macro only so it can be changed more easily,
5848 % since not square brackets don't work in some documents. Particularly
5849 % one that Bob is working on :).
5851 \def\xrefprintnodename#1{[#1]}
5853 % \dosetq is called from \setref to do the actual \write (\iflinks).
5857 \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
5862 % \internalsetq{foo}{page} expands into
5863 % CHARACTERS @xrdef{foo}{...expansion of \page...}
5864 \def\internalsetq#1#2{@xrdef{#1}{\csname #2\endcsname}}
5866 % Things to be expanded by \internalsetq.
5868 \def\Ypagenumber{\folio}
5869 \def\Ytitle{\thissection}
5871 \def\Ysectionnumberandtype{%
5873 \putwordChapter@tie \the\chapno
5874 \else \ifnum\subsecno=0
5875 \putwordSection@tie \the\chapno.\the\secno
5876 \else \ifnum\subsubsecno=0
5877 \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
5879 \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
5883 \def\Yappendixletterandtype{%
5885 \putwordAppendix@tie @char\the\appendixno{}%
5886 \else \ifnum\subsecno=0
5887 \putwordSection@tie @char\the\appendixno.\the\secno
5888 \else \ifnum\subsubsecno=0
5889 \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
5892 @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
5896 % Use TeX 3.0's \inputlineno to get the line number, for better error
5897 % messages, but if we're using an old version of TeX, don't do anything.
5899 \ifx\inputlineno\thisisundefined
5900 \let\linenumber = \empty % Pre-3.0.
5902 \def\linenumber{\the\inputlineno:\space}
5905 % Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
5906 % If its value is nonempty, SUFFIX is output afterward.
5912 \expandafter\global\expandafter\let\expandafter\thisrefX
5913 \csname X#1\endcsname
5916 % If not defined, say something at least.
5917 \angleleft un\-de\-fined\angleright
5920 \message{\linenumber Undefined cross reference `#1'.}%
5923 \global\warnedxrefstrue
5924 \message{Cross reference values unknown; you must run TeX again.}%
5929 % It's defined, so just use it.
5932 #2% Output the suffix in any case.
5935 % This is the macro invoked by entries in the aux file.
5937 \def\xrdef#1{\expandafter\gdef\csname X#1\endcsname}
5939 % Read the last existing aux file, if any. No error if none exists.
5940 \def\readauxfile{\begingroup
5941 \catcode`\^^@=\other
5942 \catcode`\^^A=\other
5943 \catcode`\^^B=\other
5944 \catcode`\^^C=\other
5945 \catcode`\^^D=\other
5946 \catcode`\^^E=\other
5947 \catcode`\^^F=\other
5948 \catcode`\^^G=\other
5949 \catcode`\^^H=\other
5950 \catcode`\^^K=\other
5951 \catcode`\^^L=\other
5952 \catcode`\^^N=\other
5953 \catcode`\^^P=\other
5954 \catcode`\^^Q=\other
5955 \catcode`\^^R=\other
5956 \catcode`\^^S=\other
5957 \catcode`\^^T=\other
5958 \catcode`\^^U=\other
5959 \catcode`\^^V=\other
5960 \catcode`\^^W=\other
5961 \catcode`\^^X=\other
5962 \catcode`\^^Z=\other
5963 \catcode`\^^[=\other
5964 \catcode`\^^\=\other
5965 \catcode`\^^]=\other
5966 \catcode`\^^^=\other
5967 \catcode`\^^_=\other
5968 % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
5969 % in xref tags, i.e., node names. But since ^^e4 notation isn't
5970 % supported in the main text, it doesn't seem desirable. Furthermore,
5971 % that is not enough: for node names that actually contain a ^
5972 % character, we would end up writing a line like this: 'xrdef {'hat
5973 % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
5974 % argument, and \hat is not an expandable control sequence. It could
5975 % all be worked out, but why? Either we support ^^ or we don't.
5977 % The other change necessary for this was to define \auxhat:
5978 % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
5979 % and then to call \auxhat in \setq.
5983 % Special characters. Should be turned off anyway, but...
5996 \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
5998 % Make the characters 128-255 be printing characters
6002 \catcode\count 1=\other
6003 \advance\count 1 by 1
6004 \ifnum \count 1<256 \loop \fi
6008 % Turn off \ as an escape so we do not lose on
6009 % entries which were dumped with control sequences in their names.
6010 % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^
6011 % Reference to such entries still does not work the way one would wish,
6012 % but at least they do not bomb out when the aux file is read in.
6015 % @ is our escape character in .aux files.
6020 \openin 1 \jobname.aux
6024 \global\havexrefstrue
6026 % Open the new aux file. TeX will close it automatically at exit.
6027 \openout\auxfile=\jobname.aux
6033 \newcount \footnoteno
6035 % The trailing space in the following definition for supereject is
6036 % vital for proper filling; pages come out unaligned when you do a
6037 % pagealignmacro call if that space before the closing brace is
6038 % removed. (Generally, numeric constants should always be followed by a
6039 % space to prevent strange expansion errors.)
6040 \def\supereject{\par\penalty -20000\footnoteno =0 }
6042 % @footnotestyle is meaningful for info output only.
6043 \let\footnotestyle=\comment
6045 \let\ptexfootnote=\footnote
6049 % Auto-number footnotes. Otherwise like plain.
6051 \let\indent=\ptexindent
6052 \global\advance\footnoteno by \@ne
6053 \edef\thisfootno{$^{\the\footnoteno}$}%
6055 % In case the footnote comes at the end of a sentence, preserve the
6056 % extra spacing after we do the footnote number.
6058 \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
6060 % Remove inadvertent blank space before typesetting the footnote number.
6066 % Don't bother with the trickery in plain.tex to not require the
6067 % footnote text as a parameter. Our footnotes don't need to be so general.
6069 % Oh yes, they do; otherwise, @ifset and anything else that uses
6070 % \parseargline fail inside footnotes because the tokens are fixed when
6071 % the footnote is read. --karl, 16nov96.
6073 % The start of the footnote looks usually like this:
6074 \gdef\startfootins{\insert\footins\bgroup}
6076 % ... but this macro is redefined inside @multitable.
6080 % We want to typeset this text as a normal paragraph, even if the
6081 % footnote reference occurs in (for example) a display environment.
6082 % So reset some parameters.
6084 \interlinepenalty\interfootnotelinepenalty
6085 \splittopskip\ht\strutbox % top baseline for broken footnotes
6086 \splitmaxdepth\dp\strutbox
6087 \floatingpenalty\@MM
6092 \parindent\defaultparindent
6096 % Because we use hanging indentation in footnotes, a @noindent appears
6097 % to exdent this text, so make it be a no-op. makeinfo does not use
6098 % hanging indentation so @noindent can still be needed within footnote
6099 % text after an @example or the like (not that this is good style).
6100 \let\noindent = \relax
6102 % Hang the footnote text off the number. Use \everypar in case the
6103 % footnote extends for more than one paragraph.
6104 \everypar = {\hang}%
6105 \textindent{\thisfootno}%
6107 % Don't crash into the line above the footnote text. Since this
6108 % expands into a box, it must come within the paragraph, lest it
6109 % provide a place where TeX can split the footnote.
6111 \futurelet\next\fo@t
6113 }%end \catcode `\@=11
6115 % @| inserts a changebar to the left of the current line. It should
6116 % surround any changed text. This approach does *not* work if the
6117 % change spans more than two lines of output. To handle that, we would
6118 % have adopt a much more difficult approach (putting marks into the main
6119 % vertical list for the beginning and end of each change).
6122 % \vadjust can only be used in horizontal mode.
6125 % Append this vertical mode material after the current line in the output.
6127 % We want to insert a rule with the height and depth of the current
6128 % leading; that is exactly what \strutbox is supposed to record.
6129 \vskip-\baselineskip
6131 % \vadjust-items are inserted at the left edge of the type. So
6132 % the \llap here moves out into the left-hand margin.
6135 % For a thicker or thinner bar, change the `1pt'.
6136 \vrule height\baselineskip width1pt
6138 % This is the space between the bar and the text.
6144 % For a final copy, take out the rectangles
6145 % that mark overfull boxes (in case you have decided
6146 % that the text looks ok even though it passes the margin).
6148 \def\finalout{\overfullrule=0pt}
6150 % @image. We use the macros from epsf.tex to support this.
6151 % If epsf.tex is not installed and @image is used, we complain.
6153 % Check for and read epsf.tex up front. If we read it only at @image
6154 % time, we might be inside a group, and then its definitions would get
6155 % undone and the next image would fail.
6156 \openin 1 = epsf.tex
6159 % Do not bother showing banner with epsf.tex v2.7k (available in
6160 % doc/epsf.tex and on ctan).
6161 \def\epsfannounce{\toks0 = }%
6165 % We will only complain once about lack of epsf.tex.
6166 \newif\ifwarnednoepsf
6167 \newhelp\noepsfhelp{epsf.tex must be installed for images to
6168 work. It is also included in the Texinfo distribution, or you can get
6169 it from ftp://tug.org/tex/epsf.tex.}
6172 \ifx\epsfbox\undefined
6173 \ifwarnednoepsf \else
6174 \errhelp = \noepsfhelp
6175 \errmessage{epsf.tex not found, images will be ignored}%
6176 \global\warnednoepsftrue
6179 \imagexxx #1,,,,,\finish
6183 % Arguments to @image:
6184 % #1 is (mandatory) image filename; we tack on .eps extension.
6185 % #2 is (optional) width, #3 is (optional) height.
6186 % #4 is (ignored optional) html alt text.
6187 % #5 is (ignored optional) extension.
6188 % #6 is just the usual extra ignored arg for parsing this stuff.
6190 \def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
6191 \catcode`\^^M = 5 % in case we're inside an example
6192 \normalturnoffactive % allow _ et al. in names
6193 % If the image is by itself, center it.
6197 % Usually we'll have text after the image which will insert
6198 % \parskip glue, so insert it here too to equalize the space
6200 \nobreak\vskip\parskip
6207 \dopdfimage{#1}{#2}{#3}%
6209 % \epsfbox itself resets \epsf?size at each figure.
6210 \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
6211 \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
6215 \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
6219 \message{localization,}
6222 % @documentlanguage is usually given very early, just after
6223 % @setfilename. If done too late, it may not override everything
6224 % properly. Single argument is the language abbreviation.
6225 % It would be nice if we could set up a hyphenation file here.
6227 \def\documentlanguage{\parsearg\dodocumentlanguage}
6228 \def\dodocumentlanguage#1{%
6229 \tex % read txi-??.tex file in plain TeX.
6230 % Read the file if it exists.
6231 \openin 1 txi-#1.tex
6233 \errhelp = \nolanghelp
6234 \errmessage{Cannot read language file txi-#1.tex}%
6237 \def\temp{\input txi-#1.tex }%
6242 \newhelp\nolanghelp{The given language definition file cannot be found or
6243 is empty. Maybe you need to install it? In the current directory
6244 should work if nowhere else does.}
6247 % @documentencoding should change something in TeX eventually, most
6248 % likely, but for now just recognize it.
6249 \let\documentencoding = \comment
6252 % Page size parameters.
6254 \newdimen\defaultparindent \defaultparindent = 15pt
6256 \chapheadingskip = 15pt plus 4pt minus 2pt
6257 \secheadingskip = 12pt plus 3pt minus 2pt
6258 \subsecheadingskip = 9pt plus 2pt minus 2pt
6260 % Prevent underfull vbox error messages.
6263 % Don't be so finicky about underfull hboxes, either.
6266 % Following George Bush, just get rid of widows and orphans.
6270 % Use TeX 3.0's \emergencystretch to help line breaking, but if we're
6271 % using an old version of TeX, don't do anything. We want the amount of
6272 % stretch added to depend on the line length, hence the dependence on
6273 % \hsize. We call this whenever the paper size is set.
6275 \def\setemergencystretch{%
6276 \ifx\emergencystretch\thisisundefined
6277 % Allow us to assign to \emergencystretch anyway.
6278 \def\emergencystretch{\dimen0}%
6280 \emergencystretch = .15\hsize
6284 % Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
6285 % 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
6286 % physical page width.
6288 % We also call \setleading{\textleading}, so the caller should define
6289 % \textleading. The caller should also set \parskip.
6291 \def\internalpagesizes#1#2#3#4#5#6#7#8{%
6294 \splittopskip = \topskip
6297 \advance\vsize by \topskip
6298 \outervsize = \vsize
6299 \advance\outervsize by 2\topandbottommargin
6300 \pageheight = \vsize
6303 \outerhsize = \hsize
6304 \advance\outerhsize by 0.5in
6307 \normaloffset = #4\relax
6308 \bindingoffset = #5\relax
6311 \pdfpageheight #7\relax
6312 \pdfpagewidth #8\relax
6315 \setleading{\textleading}
6317 \parindent = \defaultparindent
6318 \setemergencystretch
6321 % @letterpaper (the default).
6322 \def\letterpaper{{\globaldefs = 1
6323 \parskip = 3pt plus 2pt minus 1pt
6324 \textleading = 13.2pt
6326 % If page is nothing but text, make it come out even.
6327 \internalpagesizes{46\baselineskip}{6in}%
6329 {\bindingoffset}{36pt}%
6333 % Use @smallbook to reset parameters for 7x9.5 (or so) format.
6334 \def\smallbook{{\globaldefs = 1
6335 \parskip = 2pt plus 1pt
6338 \internalpagesizes{7.5in}{5in}%
6340 {\bindingoffset}{16pt}%
6343 \lispnarrowing = 0.3in
6346 \contentsrightmargin = 0pt
6347 \defbodyindent = .5cm
6350 % Use @afourpaper to print on European A4 paper.
6351 \def\afourpaper{{\globaldefs = 1
6352 \parskip = 3pt plus 2pt minus 1pt
6353 \textleading = 13.2pt
6355 % Double-side printing via postscript on Laserjet 4050
6356 % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
6357 % To change the settings for a different printer or situation, adjust
6358 % \normaloffset until the front-side and back-side texts align. Then
6359 % do the same for \bindingoffset. You can set these for testing in
6360 % your texinfo source file like this:
6362 % \global\normaloffset = -6mm
6363 % \global\bindingoffset = 10mm
6365 \internalpagesizes{51\baselineskip}{160mm}
6366 {\voffset}{\hoffset}%
6367 {\bindingoffset}{44pt}%
6372 \contentsrightmargin = 0pt
6373 \defbodyindent = 5mm
6376 % Use @afivepaper to print on European A5 paper.
6377 % From romildo@urano.iceb.ufop.br, 2 July 2000.
6378 % He also recommends making @example and @lisp be small.
6379 \def\afivepaper{{\globaldefs = 1
6380 \parskip = 2pt plus 1pt minus 0.1pt
6381 \textleading = 12.5pt
6383 \internalpagesizes{160mm}{120mm}%
6384 {\voffset}{\hoffset}%
6385 {\bindingoffset}{8pt}%
6388 \lispnarrowing = 0.2in
6391 \contentsrightmargin = 0pt
6392 \defbodyindent = 2mm
6396 % A specific text layout, 24x15cm overall, intended for A4 paper.
6397 \def\afourlatex{{\globaldefs = 1
6399 \internalpagesizes{237mm}{150mm}%
6401 {\bindingoffset}{7mm}%
6404 % Must explicitly reset to 0 because we call \afourpaper.
6408 % Use @afourwide to print on A4 paper in landscape format.
6409 \def\afourwide{{\globaldefs = 1
6411 \internalpagesizes{241mm}{165mm}%
6412 {\voffset}{-2.95mm}%
6413 {\bindingoffset}{7mm}%
6418 % @pagesizes TEXTHEIGHT[,TEXTWIDTH]
6419 % Perhaps we should allow setting the margins, \topskip, \parskip,
6420 % and/or leading, also. Or perhaps we should compute them somehow.
6422 \def\pagesizes{\parsearg\pagesizesxxx}
6423 \def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
6424 \def\pagesizesyyy#1,#2,#3\finish{{%
6425 \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
6428 \parskip = 3pt plus 2pt minus 1pt
6429 \setleading{\textleading}%
6432 \advance\dimen0 by \voffset
6435 \advance\dimen2 by \normaloffset
6437 \internalpagesizes{#1}{\hsize}%
6438 {\voffset}{\normaloffset}%
6439 {\bindingoffset}{44pt}%
6443 % Set default to letter.
6448 \message{and turning on texinfo input format.}
6450 % Define macros to output various characters with catcode for normal text.
6460 \def\normaldoublequote{"}
6463 \def\normalunderscore{_}
6464 \def\normalverticalbar{|}
6466 \def\normalgreater{>}
6468 \def\normaldollar{$}%$ font-lock fix
6470 % This macro is used to make a character print one way in ttfont
6471 % where it can probably just be output, and another way in other fonts,
6472 % where something hairier probably needs to be done.
6474 % #1 is what to print if we are indeed using \tt; #2 is what to print
6475 % otherwise. Since all the Computer Modern typewriter fonts have zero
6476 % interword stretch (and shrink), and it is reasonable to expect all
6477 % typewriter fonts to have this, we can check that font parameter.
6479 \def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
6481 % Same as above, but check for italic font. Actually this also catches
6482 % non-italic slanted fonts since it is impossible to distinguish them from
6483 % italic fonts. But since this is only used by $ and it uses \sl anyway
6484 % this is not a problem.
6485 \def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
6487 % Turn off all special characters except @
6488 % (and those which the user can use as if they were ordinary).
6489 % Most of these we simply print from the \tt font, but for some, we can
6490 % use math or other variants that look better in normal text.
6493 \def\activedoublequote{{\tt\char34}}
6494 \let"=\activedoublequote
6496 \def~{{\tt\char126}}
6502 \def_{\ifusingtt\normalunderscore\_}
6503 % Subroutine for the previous macro.
6504 \def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
6507 \def|{{\tt\char124}}
6515 \def+{{\tt \char 43}}
6517 \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
6519 % Set up an active definition for =, but don't enable it most of the time.
6520 {\catcode`\==\active
6521 \global\def={{\tt \char 61}}}
6526 % If a .fmt file is being used, characters that might appear in a file
6527 % name cannot be active until we have parsed the command line.
6528 % So turn them off again, and have \everyjob (or @setfilename) turn them on.
6529 % \otherifyactive is called near the end of this file.
6530 \def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
6534 % \rawbackslashxx outputs one backslash character in current font,
6536 \global\chardef\rawbackslashxx=`\\
6538 % \rawbackslash defines an active \ to do \rawbackslashxx.
6539 % \otherbackslash defines an active \ to be a literal `\' character with
6541 {\catcode`\\=\active
6542 @gdef@rawbackslash{@let\=@rawbackslashxx}
6543 @gdef@otherbackslash{@let\=@realbackslash}
6546 % \realbackslash is an actual character `\' with catcode other.
6547 {\catcode`\\=\other @gdef@realbackslash{\}}
6549 % \normalbackslash outputs one backslash in fixed width font.
6550 \def\normalbackslash{{\tt\rawbackslashxx}}
6554 % Used sometimes to turn off (effectively) the active characters
6555 % even after parsing them.
6556 @def@turnoffactive{%
6557 @let"=@normaldoublequote
6558 @let\=@realbackslash
6561 @let_=@normalunderscore
6562 @let|=@normalverticalbar
6564 @let>=@normalgreater
6566 @let$=@normaldollar %$ font-lock fix
6569 % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
6570 % the literal character `\'. (Thus, \ is not expandable when this is in
6573 @def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
6575 % Make _ and + \other characters, temporarily.
6576 % This is canceled by @fixbackslash.
6579 % If a .fmt file is being used, we don't want the `\input texinfo' to show up.
6580 % That is what \eatinput is for; after that, the `\' should revert to printing
6583 @gdef@eatinput input texinfo{@fixbackslash}
6584 @global@let\ = @eatinput
6586 % On the other hand, perhaps the file did not have a `\input texinfo'. Then
6587 % the first `\{ in the file would cause an error. This macro tries to fix
6588 % that, assuming it is called before the first `\' could plausibly occur.
6589 % Also back turn on active characters that might appear in the input
6590 % file name, in case not using a pre-dumped format.
6592 @gdef@fixbackslash{%
6593 @ifx\@eatinput @let\ = @normalbackslash @fi
6598 % Say @foo, not \foo, in error messages.
6601 % These look ok in all fonts, so just make them not special.
6602 @catcode`@& = @other
6603 @catcode`@# = @other
6604 @catcode`@% = @other
6606 @c Set initial fonts.
6612 @c eval: (add-hook 'write-file-hooks 'time-stamp)
6613 @c page-delimiter: "^\\\\message"
6614 @c time-stamp-start: "def\\\\texinfoversion{"
6615 @c time-stamp-format: "%:y-%02m-%02d.%02H"
6616 @c time-stamp-end: "}"