ofp-util: Work on decoding OF1.1 flow_mods.

[openvswitch] / utilities / ovs-ctl.8

.\" -*- nroff -*-
.de IQ
.  br
.  ns
.  IP "\\$1"
..
.de ST
.  PP
.  RS -0.15in
.  I "\\$1"
.  RE
..
.TH ovs\-ctl 8 "June 2011" "Open vSwitch" "Open vSwitch Manual"
.ds PN ovs\-ctl
.
.SH NAME
ovs\-ctl \- OVS startup helper script
.
.SH SYNOPSIS
\fBovs\-ctl\fR \fB\-\-system\-id=random\fR|\fIuuid\fR
[\fIoptions\fR] \fBstart
.br
\fBovs\-ctl stop
.br
\fBovs\-ctl status
.br
\fBovs\-ctl version
.br
\fBovs\-ctl
[\fIoptions\fR]
\fBload\-kmod\fR
.br
\fBovs\-ctl
\fB\-\-system\-id=random\fR|\fIuuid\fR
[\fIoptions\fR]
\fBforce\-reload\-kmod\fR
.br
\fBovs\-ctl
\fR[\fB\-\-protocol=\fIprotocol\fR]
[\fB\-\-sport=\fIsport\fR]
[\fB\-\-dport=\fIdport\fR]
\fBenable\-protocol\fR
.br
\fBovs\-ctl help \fR| \fB\-h \fR| \fB\-\-help
.br
\fBovs\-ctl \-\-version
.
.SH DESCRIPTION
.
.PP
The \fBovs\-ctl\fR program starts, stops, and checks the status of
Open vSwitch daemons.  It is not meant to be invoked directly by
system administrators but to be called internally by system startup
scripts.
.
.PP
Each of \fBovs\-ctl\fR's commands is described separately below.
.
.SH "The ``start'' command"
.
.PP
The \fBstart\fR command starts Open vSwitch.  It performs the
following tasks:
.
.IP 1.
Loads the Open vSwitch kernel module.  If this fails, and the Linux
bridge module is loaded but no bridges exist, it tries to unload the
bridge module and tries loading the Open vSwitch kernel module again.
(This is because the Open vSwitch kernel module cannot coexist with
the Linux bridge module before 2.6.37.)
.
.IP 2.
If \fB\-\-brcompat\fR was specified, loads the Open vSwitch bridge
compatibility module.
.
.PP
The \fBstart\fR command skips the following steps if
\fBovsdb\-server\fR is already running:
.IP 3.
If the Open vSwitch database file does not exist, it creates it.
If the database does exist, but it has an obsolete version, it
upgrades it to the latest schema.
.
.IP 4.
Starts \fBovsdb-server\fR.
.
.IP 5.
Initializes a few values inside the database.
.
.IP 6.
If the \fB\-\-delete\-bridges\fR option was used, deletes all of the
bridges from the database.
.
.PP
The \fBstart\fR command skips the following step if
\fBovs\-vswitchd\fR is already running:
.IP 7.
Starts \fBovs\-vswitchd\fR.
.
.PP
The \fBstart\fR command skips the following step if
\fBovs\-brcompatd\fR is already running or if \fB\-\-brcompat\fR is
not specified:
.IP 8.
Starts \fBovs\-brcompatd\fR.
.
.SS "Options"
.PP
Several command-line options influence the \fBstart\fR command's
behavior.  Some form of the following option should ordinarily be
specified:
.
.IP "\fB\-\-system\-id=\fIuuid\fR"
.IQ "\fB\-\-system\-id=random\fR"
This specifies a unique system identifier to store into
\fBexternal-ids:system-id\fR in the database's \fBOpen_vSwitch\fR
table.  Remote managers that talk to the Open vSwitch database server
over network protocols use this value to identify and distinguish Open
vSwitch instances, so it should be unique (at least) within OVS
instances that will connect to a single controller.
.IP
When \fBrandom\fR is specified, \fBovs\-ctl\fR will generate a random
ID that persists from one run to another (stored in a file).  When
another string is specified \fBovs\-ctl\fR uses it literally.
.
.PP
The following options should be specified if the defaults are not
suitable:
.
.IP "\fB\-\-system\-type=\fItype\fR"
.IQ "\fB\-\-system\-version=\fIversion\fR"
Sets the value to store in the \fBsystem-type\fR and
\fBsystem-version\fR columns, respectively, in the database's
\fBOpen_vSwitch\fR table.  Remote managers may use these values to
determine the kind of system to which they are connected (primarily
for display to human administrators).
.IP
When not specified, \fBovs\-ctl\fR uses values from the optional
\fBsystem\-type.conf\fR and \fBsystem\-version.conf\fR files(see section
\fBFILES\fR) or it uses the \fBlsb_release\fR program, if present, to
provide reasonable defaults.
.
.PP
The following options are also likely to be useful:
.
.IP "\fB\-\-external\-id=\(dq\fIname\fB=\fIvalue\fB\(dq"
Sets \fBexternal-ids:\fIname\fR to \fIvalue\fR in the database's
\fBOpen_vSwitch\fR table.  Specifying this option multiple times adds
multiple key-value pairs.
.
.IP "\fB\-\-delete\-bridges\fR"
Ordinarily Open vSwitch bridges persist from one system boot to the
next, as long as the database is preserved.  Some environments instead
expect to re-create all of the bridges and other configuration state
on every boot.  This option supports that, by deleting all Open
vSwitch bridges after starting \fBovsdb\-server\fR but before starting
\fBovs\-vswitchd\fR.
.
.PP
The following options are less important:
.
.IP "\fB\-\-daemon-cwd=\fIdirectory\fR"
Specifies the current working directory that the OVS daemons should
run from.  The default is \fB/\fR (the root directory) if this option
is not specified.  (This option is useful because most systems create
core files in a process's current working directory and because a file
system that is in use as a process's current working directory cannot
be unmounted.)
.
.IP "\fB\-\-no\-force\-corefiles\fR"
By default, \fBovs\-ctl\fR enables core dumps for the OVS daemons.
This option disables that behavior.
.
.IP "\fB\-\-no\-mlockall\fR"
By default \fBovs\-ctl\fR passes \fB\-\-mlockall\fR to
\fBovs\-vswitchd\fR, requesting that it lock all of its virtual
memory, preventing it from being paged to disk.  This option
suppresses that behavior.
.
.IP "\fB\-\-ovsdb\-server\-priority=\fIniceness\fR"
.IQ "\fB\-\-ovs\-vswitchd\-priority=\fIniceness\fR"
.IQ "\fB\-\-ovs\-brcompatd\-priority=\fIniceness\fR"
Sets the \fBnice\fR(1) level used for each daemon.  All of them
default to \fB\-10\fR.
.
.IP "\fB\-\-ovsdb\-server\-wrapper=\fIwrapper\fR"
.IQ "\fB\-\-ovs\-vswitchd\-wrapper=\fIwrapper\fR"
.IQ "\fB\-\-ovs\-brcompatd\-wrapper=\fIwrapper\fR"
.
Configures the specified daemon to run under \fIwrapper\fR, which is
one of the following:
.
.RS
.IP "\fBvalgrind\fR"
Run the daemon under \fBvalgrind\fR(1), if it is installed, logging to
\fIdaemon\fB.valgrind.log.\fIpid\fR in the log directory.
.
.IP "\fBstrace\fR"
Run the daemon under \fBstrace\fR(1), if it is installed, logging to
\fIdaemon\fB.strace.log.\fIpid\fR in the log directory.
.RE
.
.IP
By default, no wrapper is used.
.
.IP
Wrappers greatly slow daemon operations so they should not be used in
production.  They also produce voluminous logs that can quickly fill
small disk partitions.
.
.PP
The following options control file locations.  They should only be
used if the default locations cannot be used.  See \fBFILES\fR, below,
for more information.
.
.IP "\fB\-\-db\-file=\fIfile\fR"
Overrides the file name for the OVS database.
.
.IP "\fB\-\-db\-sock=\fIsocket\fR"
Overrides the file name for the Unix domain socket used to connect to
\fBovsdb\-server\fR.
.
.IP "\fB\-\-db\-schema=\fIschema\fR"
Overrides the file name for the OVS database schema.
.
.SH "The ``stop'' command"
.
.PP
The \fBstop\fR command shuts down Open vSwitch.  It kills any running
\fBovs\-brcompatd\fR, \fBovs\-vswitchd\fR, or \fBovsdb\-server\fR
daemons and waits for them to terminate.
.
.PP
The \fBstop\fR command does not unload the Open vSwitch kernel
modules.
.
.PP
This command does nothing and finishes successfully if the OVS daemons
aren't running.
.
.SH "The ``status'' command"
.
.PP
The \fBstatus\fR command checks whether the OVS daemons
\fBovs-vswitchd\fR and \fBovsdb\-server\fR are running and prints
messages with that information.  If \fB\-\-brcompat\fR is specified,
it also checks for \fBovs\-brcompatd\fR.  It exits with status 0 if
the daemons are running, 1 otherwise.
.
.SH "The ``version'' command"
.
.PP
The \fBversion\fR command runs \fBovsdb\-server \-\-version\fR and
\fBovs\-vswitchd \-\-version\fR.  If \fB\-\-brcompat\fR is specified,
it also runs \fBovs\-brcompatd \-\-version\fR.
.
.SH "The ``force\-reload\-kmod'' command"
.
.PP
The \fBforce\-reload\-kmod\fR command allows upgrading the Open
vSwitch kernel module without rebooting.  It performs the following
tasks:
.
.IP 1.
Gets a list of OVS ``internal'' interfaces, that is, network devices
implemented by Open vSwitch.  The most common examples of these are
bridge ``local ports''.
.
.IP 2.
Stops the Open vSwitch daemons, as if by a call to \fBovs\-ctl
stop\fR.
.
.IP 3.
Saves the kernel configuration state of the OVS internal interfaces
listed in step 1, including IP and IPv6 addresses and routing table
entries.
.
.IP 4.
Unloads the Open vSwitch kernel module (including the bridge
compatibility module if it is loaded).
.
.IP 5.
Starts OVS back up, as if by a call to \fBovs\-ctl start\fR.  This
reloads the kernel module and restarts the OVS daemons (including
\fBovs\-brcompatd\fR, if \fB\-\-brcompat\fR is specified).
.
.IP 6.
Restores the kernel configuration state that was saved in step 3.
.
.IP 7.
Checks for daemons that may need to be restarted because they have
packet sockets that are listening on old instances of Open vSwitch
kernel interfaces and, if it finds any, prints a warning on stdout.
DHCP is a common example: if the ISC DHCP client is running on an OVS
internal interface, then it will have to be restarted after completing
the above procedure.  (It would be nice if \fBovs\-ctl\fR could restart
daemons automatically, but the details are far too specific to a
particular distribution and installation.)
.
.PP
\fBforce\-kmod\-reload\fR internally stops and starts OVS, so it
accepts all of the options accepted by the \fBstart\fR command.
.
.SH "The ``load\-kmod'' command"
.
.PP
The \fBload\-kmod\fR command loads the openvswitch kernel modules if
they are not already loaded. This operation also occurs as part of
the \fBstart\fR command. The motivation for providing the \fBload\-kmod\fR
command is to allow errors when loading modules to be handled separatetly
from other errors that may occur when running the \fBstart\fR command.
.
.PP
By default the \fBload\-kmod\fR command attempts to load the
openvswitch kernel module. If the \fB\-\-brcompat\fR option is
specified then the brcompat kernel module is also loaded.
.
.SH "The ``enable\-protocol'' command"
.
.PP
The \fBenable\-protocol\fR command checks for rules related to a
specified protocol in the system's \fBiptables\fR(8) configuration.  If there
are no rules specifically related to that protocol, then it inserts a
rule to accept the specified protocol.
.
.PP
More specifically:
.
.IP \(bu
If \fBiptables\fR is not installed or not enabled, this command does
nothing, assuming that lack of filtering means that the protocol is
enabled.
.
.IP \(bu
If the \fBINPUT\fR chain has a rule that matches the specified
protocol, then this command does nothing, assuming that whatever rule
is installed reflects the system administrator's decisions.
.
.IP \(bu
Otherwise, this command installs a rule that accepts traffic of the
specified protocol.
.
.PP
This command normally completes successfully, even if it does
nothing.  Only the failure of an attempt to insert a rule normally
causes it to return an exit code other than 0.
.
The following options control the protocol to be enabled:
.
.IP "\fB\-\-protocol=\fIprotocol\fR"
The name of the IP protocol to be enabled, such as \fBgre\fR or
\fBtcp\fR.  The default is \fBgre\fR.
.
.IP "\fB\-\-sport=\fIsport\fR"
.IQ "\fB\-\-dport=\fIdport\fR"
TCP or UDP source or destination port to match.  These are optional
and allowed only with \fB\-\-protocol=tcp\fR or
\fB\-\-protocol=udp\fR.
.
.SH "The ``help'' command"
.
Prints a usage message and exits successfully.
.
.SH "OPTIONS"
.PP
In addition to the options listed for each command above, this option
controls the behavior of several of \fBovs\-ctl\fR's commands.
.
.IP "\fB\-\-brcompat\fR"
By default, \fBovs\-ctl\fR does not load the Open vSwitch bridge
compatibility module and does not start or check the status or report
the version of the \fBovs\-brcompatd\fR daemon.  This option enables
all of those behaviors.
.
.IP
The \fBstop\fR command always stops \fBovs\-brcompatd\fR, if it is
running, regardless of this option.
.
.SH "EXIT STATUS"
.
\fBovs\-ctl\fR exits with status 0 on success and nonzero on failure.
The \fBstart\fR command is considered to succeed if OVS is already
started; the \fBstop\fR command is considered to succeed if OVS is
already stopped.
.
.SH "ENVIRONMENT"
.
The following environment variables affect \fBovs\-ctl\fR:
.
.IP "\fBPATH\fR"
\fBovs\-ctl\fR does not hardcode the location of any of the programs
that it runs.  \fBovs\-ctl\fR will add the \fIsbindir\fR and
\fIbindir\fR that were specified at \fBconfigure\fR time to
\fBPATH\fR, if they are not already present.
.
.IP "\fBOVS_LOGDIR\fR"
.IQ "\fBOVS_RUNDIR\fR"
.IQ "\fBOVS_SYSCONFDIR\fR"
.IQ "\fBOVS_PKGDATADIR\fR"
.IQ "\fBOVS_BINDIR\fR"
.IQ "\fBOVS_SBINDIR\fR"
Setting one of these variables in the environment overrides the
respective \fBconfigure\fR option, both for \fBovs\-ctl\fR itself and
for the other Open vSwitch programs that it runs.
.
.SH "FILES"
.
\fBovs\-ctl\fR uses the following files:
.
.IP "\fBovs\-lib.sh"
Shell function library used internally by \fBovs\-ctl\fR.  It must be
installed in the same directory as \fBovs\-ctl\fR.
.
.IP "\fIlogdir\fB/\fIdaemon\fB.log\fR"
Per-daemon logfiles.
.
.IP "\fIrundir\fB/\fIdaemon\fB.pid\fR"
Per-daemon pidfiles to track whether a daemon is running and with what
process ID.
.
.IP "\fIpkgdatadir\fB/vswitch.ovsschema\fR"
The OVS database schema used to initialize the database (use
\fB\-\-db\-schema to override this location).
.
.IP "\fIsysconfdir\fB/openvswitch/conf.db\fR"
The OVS database (use \fB\-\-db\-file\fR to override this location).
.
.IP "\fIrundir\fB/openvswitch/db.sock\fR"
The Unix domain socket used for local communication with
\fBovsdb\-server\fR (use \fB\-\-db\-sock\fR to override this
location).
.
.IP "\fIsysconfdir\fB/openvswitch/system-id.conf\fR"
The persistent system UUID created and read by
\fB\-\-system\-id=random\fR.
.
.IP "\fIsysconfdir\fB/openvswitch/system\-type.conf\fR"
.IQ "\fIsysconfdir\fB/openvswitch/system\-version.conf\fR"
The \fBsystem\-type\fR  and \fBsystem\-version\fR values stored in the database's
\fBOpen_vSwitch\fR table when not specified as a command-line option.
.
.SH "EXAMPLE"
.
.PP
The files \fBdebian/openvswitch\-switch.init\fR and
\fBxenserver/etc_init.d_openvswitch\fR in the Open vSwitch source
distribution are good examples of how to use \fBovs\-ctl\fR.
.
.SH "SEE ALSO"
.
\fBREADME\fR, \fBINSTALL.Linux\fR, \fBovsdb\-server\fR(8),
\fBovs\-vswitchd\fR(8).