2 ------------------------
4 - LACP bonds no longer fall back to balance-slb when negotiations fail.
5 Instead they drop traffic.
6 - The default bond_mode changed from SLB to active-backup, to protect
7 unsuspecting users from the significant risks of SLB bonds (which are
8 documented in vswitchd/INTERNALS).
9 - Load balancing can be disabled by setting the bond-rebalance-interval
12 - Added support for bitwise matching on TCP and UDP ports.
13 See ovs-ofctl(8) for more information.
14 - Logging to console and file will have UTC timestamp as a default for all
15 the daemons. An example of the default format is 2012-01-27T16:35:17Z.
16 ovs-appctl can be used to change the default format as before.
17 - New support for limiting the number of flows in an OpenFlow flow
18 table, with configurable policy for evicting flows upon
19 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
21 - ofproto-provider interface:
22 - "struct rule" has a new member "used" that ofproto implementations
23 should maintain by updating with ofproto_rule_update_used().
24 - The default MAC learning timeout has been increased from 60 seconds
25 to 300 seconds. The MAC learning timeout is now configurable.
27 - The new option --timestamp causes the "monitor" command to print
28 a timestamp with every update.
29 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
33 ------------------------
35 - Added support for querying, modifying, and deleting flows
36 based on flow cookie when using NXM.
37 - Added new NXM_PACKET_IN format.
38 - Added new NXAST_DEC_TTL action.
40 - Added daemonization support to the monitor and snoop commands.
42 - The "find" command supports new set relational operators
43 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
44 - ovsdb-tool now uses the typical database and schema installation
45 directories as defaults.
49 ------------------------
50 - Compatible with Open vSwitch kernel module included in Linux 3.3.
51 - New "VLAN splinters" feature to work around buggy device drivers
52 in old Linux versions. (This feature is deprecated. When
53 broken device drivers are no longer in widespread use, we will
54 delete this feature.) See ovs-vswitchd.conf.db(5) for more
57 - Added ability to match on IPv6 flow label through NXM.
58 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
59 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
60 - Added ability to modify ECN bits in IPv4.
61 - Added ability to modify TTL in IPv4.
63 - Don't require the "normal" action to use mirrors. Traffic will
64 now be properly mirrored for any flows, regardless of their
66 - Track packet and byte statistics sent on mirrors.
67 - The sFlow implementation can now usually infer the correct agent
68 device instead of having to be told explicitly.
70 - New "fdb/flush" command to flush bridge's MAC learning table.
72 - A new distributed testing tool that allows one to diagnose performance
73 and connectivity issues. This tool currently is not included in RH or
75 - RHEL packaging now supports integration with Red Hat network scripts.
77 - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
78 to active-backup. SLB bonds carry significant risks with them
79 (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
80 users from running into. Users are advised to update any scripts or
81 configuration which may be negatively impacted by explicitly setting
82 the bond mode which they want to use.
86 ------------------------
88 - Added an OpenFlow extension which allows the "output" action to accept
90 - Added an OpenFlow extension for flexible learning.
91 - Bumped number of NXM registers from four to five.
93 - New "version" command to determine version of running daemon.
94 - If no argument is provided for "cfm/show", displays detailed
95 information about all interfaces with CFM enabled.
96 - If no argument is provided for "lacp/show", displays detailed
97 information about all ports with LACP enabled.
99 - New "set-if" command to modify a datapath port's configuration.
101 - The software switch now supports 255 OpenFlow tables, instead
102 of just one. By default, only table 0 is consulted, but the
103 new NXAST_RESUBMIT_TABLE action can look up in additional
104 tables. Tables 128 and above are reserved for use by the
105 switch itself; please use only tables 0 through 127.
106 - Add support for 802.1D spanning tree (STP).
107 - Fragment handling extensions:
108 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
109 fields are made available for matching in fragments with
111 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
112 via "ip_frag" in ovs-ofctl).
113 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
114 fragment handling policy.
115 - CAPWAP tunneling now supports an extension to transport a 64-bit key.
116 By default it remains compatible with the old version and other
117 standards-based implementations.
118 - Flow setups are now processed in a round-robin manner across ports
119 to prevent any single client from monopolizing the CPU and conducting
120 a denial of service attack.
121 - Added support for native VLAN tagging. A new "vlan_mode"
122 parameter can be set for "port". Possible values: "access",
123 "trunk", "native-tagged" and "native-untagged".
124 - test-openflowd has been removed. Please use ovs-vswitchd instead.
127 ------------------------
128 - New "ofproto" abstraction layer to ease porting to hardware
130 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
131 - Datapath support for Linux kernels up to 3.0.
133 - New "bundle" and "bundle_load" action extensions.
135 - Implement table unique constraints.
136 - Support cooperative locking between callers.
138 - New "-s" option for "show" command prints packet and byte
139 counters for each port.
141 - New "--readd" option for "replace-flows".
143 - New "show" command to print an overview of configuration.
144 - New "comment" command to add remark that explains intentions.
145 - ovs-brcompatd has been rewritten to fix long-standing bugs.
146 - ovs-openflowd has been renamed test-openflowd and moved into the
147 tests directory. Its presence confused too many users. Please
148 use ovs-vswitchd instead.
149 - New ovs-benchmark utility to test flow setup performance.
150 - A new log level "off" has been added. Configuring a log facility
151 "off" prevents any messages from being logged to it. Previously,
152 "emer" was effectively "off" because no messages were ever logged at
153 level "emer". Now, errors that cause a process to exit are logged
155 - "configure" option --with-l26 has been renamed --with-linux, and
156 --with-l26-source has been renamed --with-linux-source. The old
157 names will be removed after the next release, so please update
159 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
160 datapath/linux-2.6/compat-2.6 directories.
162 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
163 Please use the extensible match extensions instead.
164 - Removed the Maintenance_Point and Monitor tables in an effort
165 to simplify 802.1ag configuration.
166 - Performance and scalability improvements
170 ------------------------
171 - Ability to define policies over IPv6
174 - Support for extensible match extensions to OpenFlow
176 - Support for HFSC qdisc.
177 - Queue used by in-band control can now be configured.
179 - Kernel<->userspace interface has been reworked and should be
180 close to a stable ABI now.
181 - "Port group" concept has been dropped.
182 - GRE over IPSEC tunnels
184 - New active backup bonding mode.
185 - New L4 hashing support when LACP is enabled.
186 - Source MAC hash now includes VLAN field also.
188 - Greatly improved handling of large flow tables
190 - "show" command now prints full vport configuration.
191 - "dump-groups" command removed since kernel support for
192 port groups was dropped.
194 - New commands for working with the new Managers table.
195 - "list" command enhanced with new formatting options and --columns
197 - "get" command now accepts new --id option.
198 - New "find" command.
200 - New "queue-stats" command for printing queue stats.
201 - New commands "replace-flows" and "diff-flows".
202 - Commands to add and remove flows can now read from files.
203 - New --flow-format option to enable or disable NXM.
204 - New --more option to increase OpenFlow message verbosity.
205 - Removed "tun-cookie" command, which is no longer useful.
206 - ovs-controller enhancements for testing various features.
207 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
208 bugs. New ovs-vlan-bug-workaround command for enabling and
209 disabling a workaround for these driver bugs.
211 - "Resubmit" actions now update flow statistics.
212 - New "register" extension for use in matching and actions, via NXM.
213 - New "multipath" experimental action extension.
214 - New support for matching multicast Ethernet frames, via NXM.
215 - New extension for OpenFlow vendor error codes.
216 - New extension to set the QoS output queue without actually
217 sending to an output port.
218 - Open vSwitch now reports a single flow table, instead of
219 separate hash and wildcard tables. This better models the
220 current implementation.
221 - New experimental "note" action.
222 - New "ofproto/trace" ovs-appctl command and associated utilities
223 to ease debugging complex flow tables.
225 - Schema documentation now includes an entity-relationship diagram.
226 - The database is now garbage collected. In most tables,
227 unreferenced rows will be deleted automatically.
228 - Many tables now include statistics updated periodically by
229 ovs-vswitchd or ovsdb-server.
230 - Every table now has an "external-ids" column for use by OVS
232 - There is no default controller anymore. Each bridge must have its
233 controller individually specified.
234 - The "fail-mode" is now a property of a Bridge instead of a Controller.
235 - New versioning and checksum features.
236 - New Managers table and manager_options column in Open_vSwitch table
237 for specifying managers. The old "managers" column in the
238 Open_vSwitch table has been removed.
239 - Many "name" columns are now immutable.
241 - Dropped support for XenServer pre-5.6.100.
242 - Dropped support for Linux pre-2.6.18.
243 - Dropped controller discovery support.
244 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
245 Statistics reporting in the database is a rough equivalent.
246 - Dropped the "corekeeper" package (now separate, at
247 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
248 - Performance and scalability improvements
251 v1.1.0pre2 - 13 Sep 2010
252 ------------------------
255 v1.1.0pre1 - 31 Aug 2010
256 ------------------------
257 - OpenFlow 1.0 slicing (QoS) functionality
258 - Python bindings for configuration database (no write support)
259 - Performance and scalability improvements
264 - New "patch" interface type
269 - Configuration database with remote management
272 - Support for XenServer 5.5 and 5.6
273 - Performance and scalability improvements
276 v0.99.2 - 18 Feb 2010
277 ---------------------
280 v0.99.1 - 25 Jan 2010
281 ---------------------
282 - Add support for sFlow(R)
283 - Make headers compatible with C++
286 v0.99.0 - 14 Jan 2010
287 ---------------------
288 - User-space forwarding engine
291 v0.90.7 - 29 Nov 2009
292 ---------------------
293 - Add support for NetFlow active timeouts
300 v0.90.5 - 21 Sep 2009
301 ---------------------
302 - Generalize in-band control to more diverse network setups
projects / openvswitch / blob