2 ------------------------
4 - The default bond_mode changed from SLB to active-backup, to protect
5 unsuspecting users from the significant risks of SLB bonds (which are
6 documented in vswitchd/INTERNALS).
10 ------------------------
12 - Added support for querying, modifying, and deleting flows
13 based on flow cookie when using NXM.
14 - Added new NXM_PACKET_IN format.
15 - Added new NXAST_DEC_TTL action.
17 - Added daemonization support to the monitor and snoop commands.
19 - The "find" command supports new set relational operators
20 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
21 - ovsdb-tool now uses the typical database and schema installation
22 directories as defaults.
26 ------------------------
27 - New "VLAN splinters" feature to work around buggy device drivers
28 in old Linux versions. (This feature is deprecated. When
29 broken device drivers are no longer in widespread use, we will
30 delete this feature.) See ovs-vswitchd.conf.db(5) for more
33 - Added ability to match on IPv6 flow label through NXM.
34 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
35 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
36 - Added ability to modify ECN bits in IPv4.
37 - Added ability to modify TTL in IPv4.
39 - Don't require the "normal" action to use mirrors. Traffic will
40 now be properly mirrored for any flows, regardless of their
42 - Track packet and byte statistics sent on mirrors.
43 - The sFlow implementation can now usually infer the correct agent
44 device instead of having to be told explicitly.
46 - New "fdb/flush" command to flush bridge's MAC learning table.
48 - A new distributed testing tool that allows one to diagnose performance
49 and connectivity issues. This tool currently is not included in RH or
51 - RHEL packaging now supports integration with Red Hat network scripts.
53 - Post 1.4.*, OVS will be changing the default bond mode from balance-slb
54 to active-backup. SLB bonds carry significant risks with them
55 (documented vswitchd/INTERNALS) which we want to prevent unsuspecting
56 users from running into. Users are advised to update any scripts or
57 configuration which may be negatively impacted by explicitly setting
58 the bond mode which they want to use.
62 ------------------------
64 - Added an OpenFlow extension which allows the "output" action to accept
66 - Added an OpenFlow extension for flexible learning.
67 - Bumped number of NXM registers from four to five.
69 - New "version" command to determine version of running daemon.
70 - If no argument is provided for "cfm/show", displays detailed
71 information about all interfaces with CFM enabled.
72 - If no argument is provided for "lacp/show", displays detailed
73 information about all ports with LACP enabled.
75 - New "set-if" command to modify a datapath port's configuration.
77 - The software switch now supports 255 OpenFlow tables, instead
78 of just one. By default, only table 0 is consulted, but the
79 new NXAST_RESUBMIT_TABLE action can look up in additional
80 tables. Tables 128 and above are reserved for use by the
81 switch itself; please use only tables 0 through 127.
82 - Add support for 802.1D spanning tree (STP).
83 - Fragment handling extensions:
84 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
85 fields are made available for matching in fragments with
87 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
88 via "ip_frag" in ovs-ofctl).
89 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
90 fragment handling policy.
91 - CAPWAP tunneling now supports an extension to transport a 64-bit key.
92 By default it remains compatible with the old version and other
93 standards-based implementations.
94 - Flow setups are now processed in a round-robin manner across ports
95 to prevent any single client from monopolizing the CPU and conducting
96 a denial of service attack.
97 - Added support for native VLAN tagging. A new "vlan_mode"
98 parameter can be set for "port". Possible values: "access",
99 "trunk", "native-tagged" and "native-untagged".
100 - test-openflowd has been removed. Please use ovs-vswitchd instead.
103 ------------------------
104 - New "ofproto" abstraction layer to ease porting to hardware
106 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
107 - Datapath support for Linux kernels up to 3.0.
109 - New "bundle" and "bundle_load" action extensions.
111 - Implement table unique constraints.
112 - Support cooperative locking between callers.
114 - New "-s" option for "show" command prints packet and byte
115 counters for each port.
117 - New "--readd" option for "replace-flows".
119 - New "show" command to print an overview of configuration.
120 - New "comment" command to add remark that explains intentions.
121 - ovs-brcompatd has been rewritten to fix long-standing bugs.
122 - ovs-openflowd has been renamed test-openflowd and moved into the
123 tests directory. Its presence confused too many users. Please
124 use ovs-vswitchd instead.
125 - New ovs-benchmark utility to test flow setup performance.
126 - A new log level "off" has been added. Configuring a log facility
127 "off" prevents any messages from being logged to it. Previously,
128 "emer" was effectively "off" because no messages were ever logged at
129 level "emer". Now, errors that cause a process to exit are logged
131 - "configure" option --with-l26 has been renamed --with-linux, and
132 --with-l26-source has been renamed --with-linux-source. The old
133 names will be removed after the next release, so please update
135 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
136 datapath/linux-2.6/compat-2.6 directories.
138 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
139 Please use the extensible match extensions instead.
140 - Removed the Maintenance_Point and Monitor tables in an effort
141 to simplify 802.1ag configuration.
142 - Performance and scalability improvements
146 ------------------------
147 - Ability to define policies over IPv6
150 - Support for extensible match extensions to OpenFlow
152 - Support for HFSC qdisc.
153 - Queue used by in-band control can now be configured.
155 - Kernel<->userspace interface has been reworked and should be
156 close to a stable ABI now.
157 - "Port group" concept has been dropped.
158 - GRE over IPSEC tunnels
160 - New active backup bonding mode.
161 - New L4 hashing support when LACP is enabled.
162 - Source MAC hash now includes VLAN field also.
164 - Greatly improved handling of large flow tables
166 - "show" command now prints full vport configuration.
167 - "dump-groups" command removed since kernel support for
168 port groups was dropped.
170 - New commands for working with the new Managers table.
171 - "list" command enhanced with new formatting options and --columns
173 - "get" command now accepts new --id option.
174 - New "find" command.
176 - New "queue-stats" command for printing queue stats.
177 - New commands "replace-flows" and "diff-flows".
178 - Commands to add and remove flows can now read from files.
179 - New --flow-format option to enable or disable NXM.
180 - New --more option to increase OpenFlow message verbosity.
181 - Removed "tun-cookie" command, which is no longer useful.
182 - ovs-controller enhancements for testing various features.
183 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
184 bugs. New ovs-vlan-bug-workaround command for enabling and
185 disabling a workaround for these driver bugs.
187 - "Resubmit" actions now update flow statistics.
188 - New "register" extension for use in matching and actions, via NXM.
189 - New "multipath" experimental action extension.
190 - New support for matching multicast Ethernet frames, via NXM.
191 - New extension for OpenFlow vendor error codes.
192 - New extension to set the QoS output queue without actually
193 sending to an output port.
194 - Open vSwitch now reports a single flow table, instead of
195 separate hash and wildcard tables. This better models the
196 current implementation.
197 - New experimental "note" action.
198 - New "ofproto/trace" ovs-appctl command and associated utilities
199 to ease debugging complex flow tables.
201 - Schema documentation now includes an entity-relationship diagram.
202 - The database is now garbage collected. In most tables,
203 unreferenced rows will be deleted automatically.
204 - Many tables now include statistics updated periodically by
205 ovs-vswitchd or ovsdb-server.
206 - Every table now has an "external-ids" column for use by OVS
208 - There is no default controller anymore. Each bridge must have its
209 controller individually specified.
210 - The "fail-mode" is now a property of a Bridge instead of a Controller.
211 - New versioning and checksum features.
212 - New Managers table and manager_options column in Open_vSwitch table
213 for specifying managers. The old "managers" column in the
214 Open_vSwitch table has been removed.
215 - Many "name" columns are now immutable.
217 - Dropped support for XenServer pre-5.6.100.
218 - Dropped support for Linux pre-2.6.18.
219 - Dropped controller discovery support.
220 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
221 Statistics reporting in the database is a rough equivalent.
222 - Dropped the "corekeeper" package (now separate, at
223 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
224 - Performance and scalability improvements
227 v1.1.0pre2 - 13 Sep 2010
228 ------------------------
231 v1.1.0pre1 - 31 Aug 2010
232 ------------------------
233 - OpenFlow 1.0 slicing (QoS) functionality
234 - Python bindings for configuration database (no write support)
235 - Performance and scalability improvements
240 - New "patch" interface type
245 - Configuration database with remote management
248 - Support for XenServer 5.5 and 5.6
249 - Performance and scalability improvements
252 v0.99.2 - 18 Feb 2010
253 ---------------------
256 v0.99.1 - 25 Jan 2010
257 ---------------------
258 - Add support for sFlow(R)
259 - Make headers compatible with C++
262 v0.99.0 - 14 Jan 2010
263 ---------------------
264 - User-space forwarding engine
267 v0.90.7 - 29 Nov 2009
268 ---------------------
269 - Add support for NetFlow active timeouts
276 v0.90.5 - 21 Sep 2009
277 ---------------------
278 - Generalize in-band control to more diverse network setups
projects / openvswitch / blob