#define PG_P 0x1 /* Present */
#define PG_W 0x2 /* Writeable */
#define PG_U 0x4 /* User */
-#define PG_PWT 0x8 /* Write-Through */
-#define PG_PCD 0x10 /* Cache-Disable */
#define PG_A 0x20 /* Accessed */
#define PG_D 0x40 /* Dirty */
-#define PG_PS 0x80 /* Page Size */
-#define PG_MBZ 0x180 /* Bits must be zero */
-#define PG_USER 0xe00 /* Bits for user processes */
/*
* The PG_USER bits are not used by the kernel and they are
* not interpreted by the hardware. The kernel allows
* user processes to set them arbitrarily.
*/
-
-
-/* Control Register flags */
-#define CR0_PE 0x1 /* Protection Enable */
-#define CR0_MP 0x2 /* Monitor coProcessor */
-#define CR0_EM 0x4 /* Emulation */
-#define CR0_TS 0x8 /* Task Switched */
-#define CR0_ET 0x10 /* Extension Type */
-#define CR0_NE 0x20 /* Numeric Errror */
-#define CR0_WP 0x10000 /* Write Protect */
-#define CR0_AM 0x40000 /* Alignment Mask */
-#define CR0_NW 0x20000000 /* Not Writethrough */
-#define CR0_CD 0x40000000 /* Cache Disable */
-#define CR0_PG 0x80000000 /* Paging */
-
-#define CR4_PCE 0x100 /* Performance counter enable */
-#define CR4_MCE 0x40 /* Machine Check Enable */
-#define CR4_PSE 0x10 /* Page Size Extensions */
-#define CR4_DE 0x08 /* Debugging Extensions */
-#define CR4_TSD 0x04 /* Time Stamp Disable */
-#define CR4_PVI 0x02 /* Protected-Mode Virtual Interrupts */
-#define CR4_VME 0x01 /* V86 Mode Extensions */
-
/* EFLAGS Register. */
-#define FLAG_CF 0x00000001 /* Carry Flag. */
-#define FLAG_PF 0x00000004 /* Parity Flag. */
-#define FLAG_AF 0x00000010 /* Auxiliary Carry Flag. */
-#define FLAG_ZF 0x00000040 /* Zero Flag. */
-#define FLAG_SF 0x00000080 /* Sign Flag. */
-#define FLAG_TF 0x00000100 /* Trap Flag. */
+#define FLAG_MBS 0x00000002 /* Must be set. */
#define FLAG_IF 0x00000200 /* Interrupt Flag. */
-#define FLAG_DF 0x00000400 /* Direction Flag. */
-#define FLAG_OF 0x00000800 /* Overflow Flag. */
-#define FLAG_IOPL 0x00003000 /* I/O Privilege Level (2 bits). */
-#define FLAG_IOPL_SHIFT 12
-#define FLAG_NT 0x00004000 /* Nested Task. */
-#define FLAG_RF 0x00010000 /* Resume Flag. */
-#define FLAG_VM 0x00020000 /* Virtual 8086 Mode. */
-#define FLAG_AC 0x00040000 /* Alignment Check. */
-#define FLAG_VIF 0x00080000 /* Virtual Interrupt Flag. */
-#define FLAG_VIP 0x00100000 /* Virtual Interrupt Pending. */
-#define FLAG_ID 0x00200000 /* ID Flag. */
/* Page fault error codes */
#define FEC_PR 0x1 /* Page fault caused by protection violation */