-Notes on the GNU Translation Project
-************************************
+Notes on the Free Translation Project
+*************************************
- GNU is going international! The GNU Translation Project is a way to
-get maintainers, translators, and users all together, so that GNU will
-gradually become able to speak many languages. A few packages already
-provide translations for their messages.
+ Free software is going international! The Free Translation Project
+is a way to get maintainers of free software, translators, and users all
+together, so that will gradually become able to speak many languages.
+A few packages already provide translations for their messages.
- If you found this `ABOUT-NLS' file inside a GNU distribution, you
-may assume that the distributed package does use GNU `gettext'
-internally, itself available at your nearest GNU archive site. But you
-do *not* need to install GNU `gettext' prior to configuring, installing
-or using this package with messages translated.
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
Installers will find here some useful hints. These notes also
explain how users should proceed for getting the programs to use the
`gettext' which is used. The information can be found in the
`intl/VERSION' file, in internationalized packages.
-One advise in advance
-=====================
+Quick configuration advice
+==========================
If you want to exploit the full power of internationalization, you
should configure it using
./configure --with-included-gettext
to force usage of internationalizing routines provided within this
-package, despite the existence of internationalizing capabilities in
-the operating system where this package is being installed. So far, no
-prior implementation provides as many useful features (such as locale
-alias or message inheritance). It is also not possible to offer this
-additional functionality on top of a `catgets' implementation. Future
-versions of GNU `gettext' will very likely convey even more
-functionality. So it might be a good idea to change to GNU `gettext'
-as soon as possible.
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed. So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation. Future versions of GNU `gettext' will
+very likely convey even more functionality. So it might be a good idea
+to change to GNU `gettext' as soon as possible.
+
+ So you need _not_ provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
INSTALL Matters
===============
- Some GNU packages are "localizable" when properly installed; the
+ Some packages are "localizable" when properly installed; the
programs they contain can be made to speak your own native language.
Most such packages use GNU `gettext'. Other packages have their own
ways to internationalization, predating GNU `gettext'.
By default, this package will be installed to allow translation of
-messages. It will automatically detect whether the system provides
-usable `catgets' (if using this is selected by the installer) or
-`gettext' functions. If neither is available, the GNU `gettext' own
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. If not, the GNU `gettext' own
library will be used. This library is wholly contained within this
package, usually in the `intl/' subdirectory, so prior installation of
-the GNU `gettext' package is *not* required. Installers may use
+the GNU `gettext' package is _not_ required. Installers may use
special options at configuration time for changing the default
behaviour. The commands:
./configure --with-included-gettext
- ./configure --with-catgets
./configure --disable-nls
-will respectively bypass any pre-existing `catgets' or `gettext' to use
-the internationalizing routines provided within this package, enable
-the use of the `catgets' functions (if found on the locale system), or
-else, *totally* disable translation of messages.
+will respectively bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
When you already have GNU `gettext' installed on your system and run
configure without an option for your new package, `configure' will
to prevent auto-detection.
- By default the configuration process will not test for the `catgets'
-function and therefore they will not be used. The reasons are already
-given above: the emulation on top of `catgets' cannot provide all the
-extensions provided by the GNU `gettext' library. If you nevertheless
-want to use the `catgets' functions use
-
- ./configure --with-catgets
-
-to enable the test for `catgets' (this causes no harm if `catgets' is
-not available on your system). If you really select this option we
-would like to hear about the reasons because we cannot think of any
-good one ourself.
+ The configuration process will not test for the `catgets' function
+and therefore it will not be used. The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
Internationalized packages have usually many `po/LL.po' files, where
LL gives an ISO 639 two-letter code identifying the language. Unless
As a user, if your language has been installed for this package, you
only have to set the `LANG' environment variable to the appropriate
-ISO 639 `LL' two-letter code prior to using the programs in the
-package. For example, let's suppose that you speak German. At the
-shell prompt, merely execute `setenv LANG de' (in `csh'),
-`export LANG; LANG=de' (in `sh') or `export LANG=de' (in `bash'). This
-can be done from your `.login' or `.profile' file, once and for all.
-
- An operating system might already offer message localization for
-many of its programs, while other programs (whether GNU or not) have
-been installed locally with the full capabilities of GNU `gettext'.
-Just using `gettext' extended syntax for `LANG' would break proper
-localization of already available operating system programs. In this
-case, users should set both `LANGUAGE' and `LANG' variables in their
-environment, as programs using GNU `gettext' give preference to
-`LANGUAGE'. For example, some Swedish users would rather read
-translations in German than English for when Swedish is not available.
-This is easily accomplished by setting `LANGUAGE' to `sv:de' while
-leaving `LANG' to `sv'.
+`LL_CC' combination. Here `LL' is an ISO 639 two-letter language code,
+and `CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your country by running the command
+`locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
Translating Teams
=================
- For the GNU Translation Project to be a success, we need interested
+ For the Free Translation Project to be a success, we need interested
people who like their own language and write it well, and who are also
able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list, courtesy of Linux
-International. You may reach your translation team at the address
-`LL@li.org', replacing LL by the two-letter ISO 639 code for your
-language. Language codes are *not* the same as the country codes given
-in ISO 3166. The following translation teams exist, as of February
-1997:
-
- Arabic `ar', Chinese `zh', Czech `cs', Danish `da', Dutch `nl',
- English `en', Esperanto `eo', Finnish `fi', French `fr', German
- `de', Greek `el', Hebrew `he', Hungarian `hu', Irish `ga', Italian
- `it', Indonesian `id', Japanese `ja', Korean `ko', Latin `la',
- Norwegian `no', Persian `fa', Polish `pl', Portuguese `pt',
- Russian `ru', Slovenian `sl', Spanish `es', Swedish `sv', Telugu
- `te', Turkish `tr' and Ukrainian `uk'.
-
-For example, you may reach the Chinese translation team by writing to
-`zh@li.org'.
-
- If you'd like to volunteer to *work* at translating messages, you
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams"
+area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
should become a member of the translating team for your own language.
-The subscribing address is *not* the same as the list itself, it has
+The subscribing address is _not_ the same as the list itself, it has
`-request' appended. For example, speakers of Swedish can send a
message to `sv-request@li.org', having this message body:
subscribe
Keep in mind that team members are expected to participate
-*actively* in translations, or at solving translational difficulties,
+_actively_ in translations, or at solving translational difficulties,
rather than merely lurking around. If your team does not exist yet and
you want to start one, or if you are unsure about what to do or how to
-get started, please write to `gnu-translation@gnu.org' to reach
-the GNU coordinator for all translator teams.
+get started, please write to `translation@iro.umontreal.ca' to reach the
+coordinator for all translator teams.
The English team is special. It works at improving and uniformizing
-the terminology used in GNU. Proven linguistic skill are praised more
-than programming skill, here. For the time being, please avoid
-subscribing to the English team unless explicitly invited to do so.
+the terminology in use. Proven linguistic skill are praised more than
+programming skill, here.
Available Packages
==================
- Languages are not equally supported in all GNU packages. The
-following matrix shows the current state of GNU internationalization,
-as of February 1997. The matrix shows, in regard of each package, for
-which languages PO files have been submitted to translation
-coordination.
-
- Ready PO files cs de en es fi fr ja ko nl no pl pt sl sv
- .-------------------------------------------.
- bash | [] [] [] | 3
- bison | [] [] [] | 3
- clisp | [] [] [] | 3
- cpio | [] [] [] [] [] | 5
- diffutils | [] [] [] [] | 4
- enscript | [] [] [] [] [] | 5
- fileutils | [] [] [] [] [] [] [] [] | 8
- findutils | [] [] [] [] [] [] [] | 7
- flex | [] [] [] | 3
- gcal | [] [] [] | 3
- gettext | [] [] [] [] [] [] [] [] [] [] | 11
- grep | [] [] [] [] [] [] [] [] | 8
- hello | [] [] [] [] [] [] [] [] [] [] | 10
- id-utils | [] [] | 2
- indent | [] [] | 2
- libc | [] [] [] [] [] [] [] | 7
- m4 | [] [] [] [] [] | 5
- make | [] [] [] [] [] [] | 6
- music | [] | 1
- ptx | [] [] [] [] [] [] [] [] | 8
- recode | [] [] [] [] [] [] [] [] | 8
- sh-utils | [] [] [] [] [] | 5
- sharutils | [] [] [] [] [] | 5
- tar | [] [] [] [] [] [] [] [] [] | 9
- texinfo | | 0
- textutils | [] [] [] [] [] [] | 6
- wdiff | [] [] [] [] [] [] [] [] | 8
- `-------------------------------------------'
- 14 languages cs de en es fi fr ja ko nl no pl pt sl sv
- 27 packages 1 22 1 14 1 25 1 10 20 7 14 7 7 15 145
+ Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of May 2003.
+The matrix shows, in regard of each package, for which languages PO
+files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files am az be bg ca cs da de el en en_GB eo es
+ +-------------------------------------------+
+ a2ps | [] [] [] [] |
+ aegis | () |
+ anubis | |
+ ap-utils | |
+ bash | [] [] [] |
+ batchelor | |
+ bfd | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] |
+ bluez-pin | [] [] |
+ clisp | |
+ clisp | [] [] [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] |
+ darkstat | () [] |
+ diffutils | [] [] [] [] [] [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ error | [] [] [] [] [] |
+ fetchmail | [] () [] [] [] [] |
+ fileutils | [] [] [] |
+ findutils | [] [] [] [] [] [] |
+ flex | [] [] [] [] |
+ gas | [] |
+ gawk | [] [] [] [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext | [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] |
+ gimp-print | [] [] [] [] [] |
+ gliv | |
+ glunarclock | [] [] [] |
+ gnucash | () [] |
+ gnucash-glossary | [] () [] |
+ gnupg | [] () [] [] [] [] |
+ gpe-calendar | [] |
+ gpe-conf | [] |
+ gpe-contacts | [] |
+ gpe-edit | |
+ gpe-login | [] |
+ gpe-ownerinfo | [] |
+ gpe-sketchbook | [] |
+ gpe-timesheet | |
+ gpe-today | [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] |
+ gpsdrive | () () () |
+ grep | [] [] [] [] [] |
+ gretl | [] |
+ hello | [] [] [] [] [] [] |
+ id-utils | [] [] |
+ indent | [] [] [] [] |
+ jpilot | [] [] [] [] |
+ jwhois | [] |
+ kbd | [] [] [] [] [] |
+ ld | [] [] |
+ libc | [] [] [] [] [] [] |
+ libgpewidget | [] |
+ libiconv | [] [] [] [] [] |
+ lifelines | [] () |
+ lilypond | [] |
+ lingoteach | |
+ lingoteach_lessons | () () |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailutils | [] [] |
+ make | [] [] [] |
+ man-db | [] () [] [] () |
+ mysecretdiary | [] [] [] |
+ nano | [] () [] [] [] |
+ nano_1_0 | [] () [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] [] [] |
+ ptx | [] [] [] [] [] |
+ python | |
+ radius | |
+ recode | [] [] [] [] [] [] |
+ screem | |
+ sed | [] [] [] [] [] |
+ sh-utils | [] [] [] |
+ sharutils | [] [] [] [] [] [] |
+ sketch | [] () [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] [] |
+ textutils | [] [] [] [] |
+ tin | () () |
+ util-linux | [] [] [] [] [] |
+ vorbis-tools | [] [] [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] |
+ wget | [] [] [] [] [] [] [] |
+ xchat | [] [] [] |
+ xpad | |
+ +-------------------------------------------+
+ am az be bg ca cs da de el en en_GB eo es
+ 0 1 4 2 31 17 54 60 14 1 4 12 56
+
+ et fa fi fr ga gl he hr hu id it ja ko
+ +----------------------------------------+
+ a2ps | [] [] [] () () |
+ aegis | |
+ anubis | [] |
+ ap-utils | [] |
+ bash | [] [] |
+ batchelor | [] |
+ bfd | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] [] |
+ bluez-pin | [] [] [] [] |
+ clisp | |
+ clisp | [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] [] |
+ darkstat | () [] [] [] |
+ diffutils | [] [] [] [] [] [] [] |
+ e2fsprogs | |
+ enscript | [] [] |
+ error | [] [] [] [] |
+ fetchmail | [] |
+ fileutils | [] [] [] [] [] |
+ findutils | [] [] [] [] [] [] [] [] [] [] [] |
+ flex | [] [] |
+ gas | [] |
+ gawk | [] [] |
+ gcal | [] |
+ gcc | [] |
+ gettext | [] [] [] |
+ gettext-runtime | [] [] [] [] |
+ gettext-tools | [] |
+ gimp-print | [] [] |
+ gliv | () |
+ glunarclock | [] [] [] [] |
+ gnucash | [] |
+ gnucash-glossary | [] |
+ gnupg | [] [] [] [] [] [] [] |
+ gpe-calendar | [] |
+ gpe-conf | |
+ gpe-contacts | [] |
+ gpe-edit | [] [] |
+ gpe-login | [] |
+ gpe-ownerinfo | [] [] [] |
+ gpe-sketchbook | [] |
+ gpe-timesheet | [] [] [] |
+ gpe-today | [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | [] [] [] |
+ gprof | [] [] |
+ gpsdrive | () [] () () |
+ grep | [] [] [] [] [] [] [] [] [] [] [] |
+ gretl | [] |
+ hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] |
+ indent | [] [] [] [] [] [] [] [] |
+ jpilot | [] () |
+ jwhois | [] [] [] [] |
+ kbd | [] |
+ ld | [] |
+ libc | [] [] [] [] [] [] |
+ libgpewidget | [] [] [] |
+ libiconv | [] [] [] [] [] [] [] [] |
+ lifelines | () |
+ lilypond | [] |
+ lingoteach | [] [] |
+ lingoteach_lessons | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailutils | |
+ make | [] [] [] [] [] [] |
+ man-db | [] () () |
+ mysecretdiary | [] [] |
+ nano | [] [] [] [] |
+ nano_1_0 | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] |
+ ptx | [] [] [] [] [] [] [] |
+ python | |
+ radius | |
+ recode | [] [] [] [] [] [] |
+ screem | |
+ sed | [] [] [] [] [] [] [] [] |
+ sh-utils | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] |
+ sketch | [] |
+ soundtracker | [] [] [] |
+ sp | [] () |
+ tar | [] [] [] [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ textutils | [] [] [] [] [] |
+ tin | [] () |
+ util-linux | [] [] [] [] () [] |
+ vorbis-tools | [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] [] |
+ wget | [] [] [] [] [] [] [] [] |
+ xchat | [] [] [] |
+ xpad | |
+ +----------------------------------------+
+ et fa fi fr ga gl he hr hu id it ja ko
+ 20 1 15 73 14 24 8 10 30 31 19 31 9
+
+ lg lt lv ms nb nl nn no pl pt pt_BR ro
+ +----------------------------------------+
+ a2ps | [] [] () () () [] [] |
+ aegis | () |
+ anubis | [] [] |
+ ap-utils | () |
+ bash | [] |
+ batchelor | |
+ bfd | |
+ binutils | |
+ bison | [] [] [] [] |
+ bluez-pin | [] |
+ clisp | |
+ clisp | [] |
+ coreutils | [] |
+ cpio | [] [] [] |
+ darkstat | [] [] [] [] |
+ diffutils | [] [] [] |
+ e2fsprogs | |
+ enscript | [] [] |
+ error | [] [] |
+ fetchmail | () () |
+ fileutils | [] |
+ findutils | [] [] [] [] |
+ flex | [] |
+ gas | |
+ gawk | [] |
+ gcal | |
+ gcc | |
+ gettext | [] |
+ gettext-runtime | [] |
+ gettext-tools | |
+ gimp-print | [] |
+ gliv | [] |
+ glunarclock | [] |
+ gnucash | |
+ gnucash-glossary | [] [] |
+ gnupg | |
+ gpe-calendar | [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | [] |
+ gpe-edit | [] [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-timesheet | [] [] |
+ gpe-today | [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | |
+ gprof | [] |
+ gpsdrive | () () () |
+ grep | [] [] [] [] |
+ gretl | |
+ hello | [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] |
+ indent | [] [] [] |
+ jpilot | () () |
+ jwhois | [] [] [] |
+ kbd | |
+ ld | |
+ libc | [] [] [] [] |
+ libgpewidget | [] [] |
+ libiconv | [] [] |
+ lifelines | |
+ lilypond | [] |
+ lingoteach | |
+ lingoteach_lessons | |
+ lynx | [] [] |
+ m4 | [] [] [] [] |
+ mailutils | |
+ make | [] [] |
+ man-db | [] |
+ mysecretdiary | [] |
+ nano | [] [] [] [] |
+ nano_1_0 | [] [] [] [] |
+ opcodes | [] [] [] |
+ parted | [] [] [] |
+ ptx | [] [] [] [] [] [] [] |
+ python | |
+ radius | |
+ recode | [] [] [] |
+ screem | |
+ sed | [] [] |
+ sh-utils | [] |
+ sharutils | [] |
+ sketch | [] |
+ soundtracker | |
+ sp | |
+ tar | [] [] [] [] [] [] |
+ texinfo | [] |
+ textutils | [] |
+ tin | |
+ util-linux | [] [] |
+ vorbis-tools | [] [] |
+ wastesedge | |
+ wdiff | [] [] [] [] |
+ wget | [] [] [] |
+ xchat | [] [] |
+ xpad | [] |
+ +----------------------------------------+
+ lg lt lv ms nb nl nn no pl pt pt_BR ro
+ 0 0 2 11 7 26 3 4 18 15 34 34
+
+ ru sk sl sr sv ta tr uk vi wa zh_CN zh_TW
+ +-------------------------------------------+
+ a2ps | [] [] [] [] [] | 16
+ aegis | () | 0
+ anubis | [] [] | 5
+ ap-utils | () | 1
+ bash | [] | 7
+ batchelor | | 1
+ bfd | [] [] [] | 7
+ binutils | [] [] [] | 7
+ bison | [] [] | 13
+ bluez-pin | | 7
+ clisp | | 0
+ clisp | | 5
+ coreutils | [] [] [] [] [] | 14
+ cpio | [] [] [] | 13
+ darkstat | [] () () | 9
+ diffutils | [] [] [] [] | 21
+ e2fsprogs | [] | 3
+ enscript | [] [] [] | 11
+ error | [] [] [] | 14
+ fetchmail | [] | 7
+ fileutils | [] [] [] [] [] [] | 15
+ findutils | [] [] [] [] [] [] | 27
+ flex | [] [] [] | 10
+ gas | [] | 3
+ gawk | [] [] | 9
+ gcal | [] [] | 4
+ gcc | [] | 4
+ gettext | [] [] [] [] [] [] | 15
+ gettext-runtime | [] [] [] [] [] [] | 16
+ gettext-tools | [] [] | 5
+ gimp-print | [] [] | 10
+ gliv | | 1
+ glunarclock | [] [] [] | 11
+ gnucash | [] [] | 4
+ gnucash-glossary | [] [] [] | 8
+ gnupg | [] [] [] [] | 16
+ gpe-calendar | [] | 5
+ gpe-conf | | 3
+ gpe-contacts | [] | 4
+ gpe-edit | [] | 5
+ gpe-login | [] | 5
+ gpe-ownerinfo | [] | 7
+ gpe-sketchbook | [] | 5
+ gpe-timesheet | [] | 6
+ gpe-today | [] | 6
+ gpe-todo | [] | 6
+ gphoto2 | [] [] | 9
+ gprof | [] [] | 7
+ gpsdrive | [] [] | 3
+ grep | [] [] [] [] | 24
+ gretl | | 2
+ hello | [] [] [] [] [] | 33
+ id-utils | [] [] [] | 11
+ indent | [] [] [] [] | 19
+ jpilot | [] [] [] [] [] | 10
+ jwhois | () () [] [] | 10
+ kbd | [] [] | 8
+ ld | [] [] | 5
+ libc | [] [] [] [] | 20
+ libgpewidget | | 6
+ libiconv | [] [] [] [] [] [] | 21
+ lifelines | [] | 2
+ lilypond | [] | 4
+ lingoteach | | 2
+ lingoteach_lessons | () | 0
+ lynx | [] [] [] [] | 14
+ m4 | [] [] [] | 15
+ mailutils | | 2
+ make | [] [] [] [] | 15
+ man-db | [] | 6
+ mysecretdiary | [] [] | 8
+ nano | [] [] [] | 15
+ nano_1_0 | [] [] [] | 15
+ opcodes | [] [] | 9
+ parted | [] [] | 13
+ ptx | [] [] [] | 22
+ python | | 0
+ radius | | 0
+ recode | [] [] [] [] | 19
+ screem | [] | 1
+ sed | [] [] [] [] [] | 20
+ sh-utils | [] [] [] | 13
+ sharutils | [] [] [] [] | 16
+ sketch | [] | 5
+ soundtracker | [] | 7
+ sp | [] | 3
+ tar | [] [] [] [] [] | 24
+ texinfo | [] [] [] [] | 13
+ textutils | [] [] [] [] [] | 15
+ tin | | 1
+ util-linux | [] [] | 14
+ vorbis-tools | [] | 7
+ wastesedge | | 0
+ wdiff | [] [] [] [] | 17
+ wget | [] [] [] [] [] [] [] | 25
+ xchat | [] [] [] | 11
+ xpad | | 1
+ +-------------------------------------------+
+ 50 teams ru sk sl sr sv ta tr uk vi wa zh_CN zh_TW
+ 97 domains 32 19 16 0 56 0 48 10 1 1 12 23 913
Some counters in the preceding matrix are higher than the number of
visible blocks let us expect. This is because a few extra PO files are
which it applies should also have been internationalized and
distributed as such by its maintainer. There might be an observable
lag between the mere existence a PO file and its wide availability in a
-GNU distribution.
-
- If February 1997 seems to be old, you may fetch a more recent copy
-of this `ABOUT-NLS' file on most GNU archive sites.
+distribution.
+
+ If May 2003 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
+
+Using `gettext' in new packages
+===============================
+
+ If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
+`translation@iro.umontreal.ca' to make the `.pot' files available to
+the translation teams.
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 675 Mass Ave, Cambridge, MA 02139, USA
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
- Copyright (C) 19yy <name of author>
+ Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
- Gnomovision version 69, Copyright (C) 19yy name of author
+ Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
-Wed Dec 10 23:36:16 2003 Ben Pfaff <blp@gnu.org>
+Thu Dec 11 00:12:19 2003 Ben Pfaff <blp@gnu.org>
- * lib/gmp/: Removed, because it no longer compiles with recent GCC
- versions.
+ * Update build system to Autoconf 2.58, Automake 1.7, gettext
+ 0.12.1.
-Wed Dec 10 23:32:47 2003 Ben Pfaff <blp@gnu.org>
+2003-12-08 gettextize <bug-gnu-gettext@gnu.org>
- * sysdeps/: Removed, because everything was too old to be useful
- anymore.
+ * Makefile.am (SUBDIRS): Add m4.
+ (ACLOCAL_AMFLAGS): New variable.
+ (EXTRA_DIST): Add config.rpath.
+ * configure.in (AC_CONFIG_FILES): Add po/Makefile.in,
Sun Jan 2 21:24:32 2000 Ben Pfaff <blp@gnu.org>
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
+Foundation, Inc.
+
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
Basic Installation
==================
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, a file
-`config.cache' that saves the results of its tests to speed up
-reconfiguring, and a file `config.log' containing compiler output
-(useful mainly for debugging `configure').
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If at some point `config.cache'
-contains results you don't want to keep, you may remove or edit it.
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
- The file `configure.in' is used to create `configure' by a program
-called `autoconf'. You only need `configure.in' if you want to change
-it or regenerate `configure' using a newer version of `autoconf'.
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
The simplest way to compile this package is:
`sh ./configure' instead to prevent `csh' from trying to execute
`configure' itself.
- Running `configure' takes a while. While running, it prints some
+ Running `configure' takes awhile. While running, it prints some
messages telling which features it is checking for.
2. Type `make' to compile the package.
=====================
Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. You can give `configure'
-initial values for variables by setting them in the environment. Using
-a Bourne-compatible shell, you can do that on the command line like
-this:
- CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
-Or on systems that have the `env' program, you can do it like this:
- env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- If you have to use a `make' that does not supports the `VPATH'
-variable, you have to compile the package for one architecture at a time
-in the source code directory. After you have installed the package for
-one architecture, use `make distclean' before reconfiguring for another
-architecture.
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
Installation Names
==================
PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Specifying the System Type
==========================
- There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host the package
-will run on. Usually `configure' can figure that out, but if it prints
-a message saying it can not guess the host type, give it the
-`--host=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name with three fields:
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
CPU-COMPANY-SYSTEM
-See the file `config.sub' for the possible values of each field. If
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
+need to know the machine type.
- If you are building compiler tools for cross-compiling, you can also
+ If you are _building_ compiler tools for cross-compiling, you should
use the `--target=TYPE' option to select the type of system they will
-produce code for and the `--build=TYPE' option to select the type of
-system on which you are compiling the package.
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
Sharing Defaults
================
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
-Operation Controls
+Defining Variables
==================
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
`configure' recognizes the following options to control how it
operates.
-`--cache-file=FILE'
- Use and save the results of the tests in FILE instead of
- `./config.cache'. Set FILE to `/dev/null' to disable caching, for
- debugging `configure'.
-
`--help'
+`-h'
Print a summary of the options to `configure', and exit.
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
`--quiet'
`--silent'
`-q'
- Do not print messages saying which checks are being made.
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
-`--version'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`configure' also accepts some other, not widely useful, options.
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
## Process this file with automake to produce Makefile.in -*- makefile -*-
-AUTOMAKE_OPTIONS = gnits 1.4
+AUTOMAKE_OPTIONS = gnits 1.7
-SUBDIRS = doc intl po lib src config tests
+SUBDIRS = m4 doc intl lib src po config tests
pkgdocdir = $(prefix)/doc/@PACKAGE@
pkgdoc_DATA = NEWS README TODO
DISTCLEANFILES = pref.h
dist-hook:
- cp -rp $(top_srcdir)/sysdeps $(distdir)
cp -rp $(top_srcdir)/examples $(distdir)
# A `private installation' in my terms is just having the appropriate
private-uninstall:
$(MAKE) private-uninstall -C config
-EXTRA_DIST = NEWS ONEWS TODO pref.h.orig reconfigure configure
+EXTRA_DIST = config.rpath NEWS ONEWS TODO pref.h.orig reconfigure configure
MAINTAINERCLEANFILES = Makefile.in configure aclocal.m4 config.h.in
+
+ACLOCAL_AMFLAGS = -I m4
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
+@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = .
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_LIBS = @GMP_LIBS@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
-LOCAL_CC = @LOCAL_CC@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
-AUTOMAKE_OPTIONS = gnits 1.4
+AUTOMAKE_OPTIONS = gnits 1.7
-SUBDIRS = doc intl po lib src config tests
+SUBDIRS = m4 doc intl lib src po config tests
pkgdocdir = $(prefix)/doc/@PACKAGE@
pkgdoc_DATA = NEWS README TODO
DISTCLEANFILES = pref.h
-EXTRA_DIST = NEWS ONEWS TODO pref.h.orig reconfigure configure
+EXTRA_DIST = config.rpath NEWS ONEWS TODO pref.h.orig reconfigure configure
MAINTAINERCLEANFILES = Makefile.in configure aclocal.m4 config.h.in
+
+ACLOCAL_AMFLAGS = -I m4
+subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-DATA = $(noinst_DATA) $(pkgdoc_DATA)
-
-DIST_COMMON = README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
-INSTALL Makefile.am Makefile.in NEWS THANKS TODO acconfig.h \
-acinclude.m4 aclocal.m4 config.guess config.h.in config.sub configure \
-configure.in install-sh missing mkinstalldirs
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+CONFIG_CLEAN_FILES = intl/Makefile
+DIST_SOURCES =
+DATA = $(noinst_DATA) $(pkgdoc_DATA)
+
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+ ps-recursive install-info-recursive uninstall-info-recursive \
+ all-recursive install-data-recursive install-exec-recursive \
+ installdirs-recursive install-recursive uninstall-recursive \
+ check-recursive installcheck-recursive
+DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure \
+ ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL Makefile.am NEWS \
+ THANKS TODO acinclude.m4 aclocal.m4 config.guess config.h.in \
+ config.rpath config.sub configure configure.ac depcomp \
+ install-sh missing mkinstalldirs
+DIST_SUBDIRS = $(SUBDIRS)
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnits --include-deps Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-$(ACLOCAL_M4): configure.in acinclude.m4
- cd $(srcdir) && $(ACLOCAL)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnits Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+$(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
-config.h: stamp-h
- @if test ! -f $@; then \
- rm -f stamp-h; \
- $(MAKE) stamp-h; \
- else :; fi
-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES= CONFIG_HEADERS=config.h \
- $(SHELL) ./config.status
- @echo timestamp > stamp-h 2> /dev/null
-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
+$(ACLOCAL_M4): configure.ac acinclude.m4 m4/codeset.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 m4/intdiv0.m4 m4/inttypes-pri.m4 m4/inttypes.m4 m4/inttypes_h.m4 m4/isc-posix.m4 m4/lcmessage.m4 m4/lib-ld.m4 m4/lib-link.m4 m4/lib-prefix.m4 m4/nls.m4 m4/po.m4 m4/progtest.m4 m4/stdint_h.m4 m4/uintmax_t.m4 m4/ulonglong.m4
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
@if test ! -f $@; then \
- rm -f $(srcdir)/stamp-h.in; \
- $(MAKE) $(srcdir)/stamp-h.in; \
+ rm -f stamp-h1; \
+ $(MAKE) stamp-h1; \
else :; fi
-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
- cd $(top_srcdir) && $(AUTOHEADER)
- @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null
-mostlyclean-hdr:
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
-clean-hdr:
+$(srcdir)/config.h.in: $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ touch $(srcdir)/config.h.in
distclean-hdr:
- -rm -f config.h
-
-maintainer-clean-hdr:
-
+ -rm -f config.h stamp-h1
+intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+uninstall-info-am:
+pkgdocDATA_INSTALL = $(INSTALL_DATA)
install-pkgdocDATA: $(pkgdoc_DATA)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(pkgdocdir)
@list='$(pkgdoc_DATA)'; for p in $$list; do \
- if test -f $(srcdir)/$$p; then \
- echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgdocdir)/$$p"; \
- $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgdocdir)/$$p; \
- else if test -f $$p; then \
- echo " $(INSTALL_DATA) $$p $(DESTDIR)$(pkgdocdir)/$$p"; \
- $(INSTALL_DATA) $$p $(DESTDIR)$(pkgdocdir)/$$p; \
- fi; fi; \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " $(pkgdocDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdocdir)/$$f"; \
+ $(pkgdocDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdocdir)/$$f; \
done
uninstall-pkgdocDATA:
@$(NORMAL_UNINSTALL)
- list='$(pkgdoc_DATA)'; for p in $$list; do \
- rm -f $(DESTDIR)$(pkgdocdir)/$$p; \
+ @list='$(pkgdoc_DATA)'; for p in $$list; do \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " rm -f $(DESTDIR)$(pkgdocdir)/$$f"; \
+ rm -f $(DESTDIR)$(pkgdocdir)/$$f; \
done
# This directory's subdirectories are mostly independent; you can cd
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
+ @set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- rev="$$subdir $$rev"; \
- test "$$subdir" = "." && dot_seen=yes; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
done; \
- test "$$dot_seen" = "no" && rev=". $$rev"; \
+ rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
+ if (etags --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ else \
+ include_option=--include; \
+ fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
done; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
-mostlyclean-tags:
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
-clean-tags:
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+top_distdir = .
distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- -rm -rf $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
- mkdir $(distdir)/=build
- mkdir $(distdir)/=inst
- dc_install_base=`cd $(distdir)/=inst && pwd`; \
- cd $(distdir)/=build \
- && ../configure --with-included-gettext --srcdir=.. --prefix=$$dc_install_base \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) dist
- -rm -rf $(distdir)
- @banner="$(distdir).tar.gz is ready for distribution"; \
- dashes=`echo "$$banner" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- echo "$$dashes"
-dist: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
-dist-all: distdir
- -chmod -R a+r $(distdir)
- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
- -rm -rf $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+
distdir: $(DISTFILES)
- @if sed 15q $(srcdir)/NEWS | fgrep -e "$(VERSION)" > /dev/null; then :; else \
+ @case `sed 15q $(srcdir)/NEWS` in \
+ *"$(VERSION)"*) : ;; \
+ *) \
echo "NEWS not updated; not releasing" 1>&2; \
- exit 1; \
- fi
- -rm -rf $(distdir)
+ exit 1;; \
+ esac
+ $(am__remove_distdir)
mkdir $(distdir)
- -chmod 777 $(distdir)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ $(mkinstalldirs) $(distdir)/intl $(distdir)/po
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
- for subdir in $(SUBDIRS); do \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
- chmod 777 $(distdir)/$$subdir; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
|| exit 1; \
fi; \
done
- $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ $(am__remove_distdir)
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ --with-included-gettext \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+ && rm -f $(distdir).tar.gz \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @echo "$(distdir).tar.gz is ready for distribution" | \
+ sed 'h;s/./=/g;p;x;p;x'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
check-am: all-am
check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-all-recursive-am: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
+all-am: Makefile $(DATA) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+ $(mkinstalldirs) $(DESTDIR)$(pkgdocdir)
-install-exec-am:
+install: install-recursive
install-exec: install-exec-recursive
-
-install-data-am: install-pkgdocDATA
install-data: install-data-recursive
+uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am: uninstall-pkgdocDATA
-uninstall: uninstall-recursive
-all-am: Makefile $(DATA) config.h
-all-redirect: all-recursive-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
- $(mkinstalldirs) $(DESTDIR)$(pkgdocdir)
-
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic
+clean: clean-recursive
-mostlyclean: mostlyclean-recursive
+clean-am: clean-generic mostlyclean-am
-clean-am: clean-hdr clean-tags clean-generic mostlyclean-am
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-clean: clean-recursive
+dvi: dvi-recursive
-distclean-am: distclean-hdr distclean-tags distclean-generic clean-am
+dvi-am:
-distclean: distclean-recursive
- -rm -f config.status
+info: info-recursive
-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am: install-pkgdocDATA
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-recursive
- -rm -f config.status
-
-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
-uninstall-pkgdocDATA install-pkgdocDATA install-data-recursive \
-uninstall-data-recursive install-exec-recursive \
-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
-all-recursive check-recursive installcheck-recursive info-recursive \
-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-pkgdocDATA
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+ clean-generic clean-recursive ctags ctags-recursive dist \
+ dist-all dist-gzip distcheck distclean distclean-generic \
+ distclean-hdr distclean-recursive distclean-tags distcleancheck \
+ distdir distuninstallcheck dvi dvi-am dvi-recursive info \
+ info-am info-recursive install install-am install-data \
+ install-data-am install-data-recursive install-exec \
+ install-exec-am install-exec-recursive install-info \
+ install-info-am install-info-recursive install-man \
+ install-pkgdocDATA install-recursive install-strip installcheck \
+ installcheck-am installdirs installdirs-am \
+ installdirs-recursive maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-recursive pdf pdf-am pdf-recursive ps ps-am \
+ ps-recursive tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am uninstall-info-recursive uninstall-pkgdocDATA \
+ uninstall-recursive
dist-hook:
- cp -rp $(top_srcdir)/sysdeps $(distdir)
cp -rp $(top_srcdir)/examples $(distdir)
# A `private installation' in my terms is just having the appropriate
$(MAKE) private-install -C config
private-uninstall:
$(MAKE) private-uninstall -C config
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
PSPP NEWS -- history of user-visible changes.
-Time-stamp: <2000-01-07 20:50:17 blp>
+Time-stamp: <2003-12-09 11:33:29 blp>
Copyright (C) 1996-9, 2000 Free Software Foundation, Inc.
See the end for copying conditions.
Please send PSPP bug reports to bug-gnu-pspp@gnu.org.
\f
+Version 0.3.1 changes since 0.3.0:
+
+ Update build system to Autoconf 2.58, Automake 1.7, gettext 0.12.1.
+
Version 0.3.0 changes since 0.2.3:
Bugs fixed:
+++ /dev/null
-/* Special definitions, to process by autoheader.
- Copyright (C) 1997-9, 2000 Free Software Foundation. */
-
-/* Definitions for byte order, according to significance of bytes, from low
- addresses to high addresses. The value is what you get by putting '4'
- in the most significant byte, '3' in the second most significant byte,
- '2' in the second least significant byte, and '1' in the least
- significant byte. These definitions never need to be modified. */
-#define BIG 4321 /* 68k */
-#define LITTLE 1234 /* i[3456]86 */
-#define UNKNOWN 0000 /* Endianness must be determined at runtime. */
-
-/* Definitions for floating-point representation. */
-#define FPREP_IEEE754 754 /* The usual IEEE-754 format. */
-#define FPREP_UNKNOWN 666 /* Triggers an error at compile time. */
-
-/* We want prototypes for all the GNU extensions. */
-#define _GNU_SOURCE 1
-
-/* Name of the distribution. */
-#define PACKAGE "PSPP"
-
-/* Version of the distribution. */
-#undef VERSION
-
-/* The concatenation of the strings "GNU ", and PACKAGE. */
-#define GNU_PACKAGE "GNU PSPP"
-
-/* Define to 1 if ANSI function prototypes are usable. */
-#undef PROTOTYPES
-
-
-@TOP@
-
-/* Define if sprintf() returns the number of characters written to
- the destination string, excluding the null terminator. */
-#undef HAVE_GOOD_SPRINTF
-
-/* Define if rand() and company work according to ANSI. */
-#undef HAVE_GOOD_RANDOM
-
-/* Define endianness of computer here as BIG or LITTLE, if known.
- If not known, define as UNKNOWN. */
-#define ENDIAN BIG
-
-/* Define as floating-point representation of this computer. For
- i386, m68k, and other common chips, this is FPREP_IEEE754. */
-#define FPREP FPREP_IEEE754
-
-/* Number of digits in longest `long' value, including sign. This is
- usually 11, for 32-bit `long's, or 19, for 64-bit `long's. */
-#define INT_DIGITS 19
-
-/* Define if you have the history library (-lhistory). */
-#undef HAVE_LIBHISTORY
-
-/* Define if you have the termcap library (-ltermcap). */
-#undef HAVE_LIBTERMCAP
-
-/* Stolen from Ulrich Drepper, <drepper@gnu.org> gettext-0.10,
- 1995. */
-
-/* Define if your locale.h file contains LC_MESSAGES. */
-#undef HAVE_LC_MESSAGES
-
-/* Define to 1 if NLS is requested. */
-#undef ENABLE_NLS
-
-/* Define as 1 if you have catgets and don't want to use GNU gettext. */
-#undef HAVE_CATGETS
-
-/* Define as 1 if you have gettext and don't want to use GNU gettext. */
-#undef HAVE_GETTEXT
-
-/* Define as 1 if you have the stpcpy function. */
-#undef HAVE_STPCPY
-
-@BOTTOM@
-
-#include <pref.h>
-
-/* Local Variables: */
-/* mode:c */
-/* End: */
-dnl --------------------------------------------------------- ##
-dnl The following definitions are from gettext-0.10.27. ##
-dnl --------------------------------------------------------- ##
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 2
-
-AC_DEFUN(AM_WITH_NLS,
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE(nls,
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT($USE_NLS)
- AC_SUBST(USE_NLS)
-
- USE_INCLUDED_LIBINTL=no
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- AC_DEFINE(ENABLE_NLS)
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH(included-gettext,
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If gettext or catgets are available (in this order) we
- dnl use this. Else we have to fall back to GNU NLS library.
- dnl catgets is only used if permitted by option --with-catgets.
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
-
- AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
- [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
- gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- AC_CHECK_LIB(intl, bindtextdomain,
- [AC_CACHE_CHECK([for gettext in libintl],
- gt_cv_func_gettext_libintl,
- [AC_TRY_LINK([], [return (int) gettext ("")],
- gt_cv_func_gettext_libintl=yes,
- gt_cv_func_gettext_libintl=no)])])
- fi
-
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
- AC_DEFINE(HAVE_GETTEXT)
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
- if test "$MSGFMT" != "no"; then
- AC_CHECK_FUNCS(dcgettext)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr],
- [CATOBJEXT=.gmo
- DATADIRNAME=share],
- [CATOBJEXT=.mo
- DATADIRNAME=lib])
- INSTOBJEXT=.mo
- fi
- fi
- ])
-
- if test "$CATOBJEXT" = "NONE"; then
- AC_MSG_CHECKING([whether catgets can be used])
- AC_ARG_WITH(catgets,
- [ --with-catgets use catgets functions if available],
- nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
- AC_MSG_RESULT($nls_cv_use_catgets)
-
- if test "$nls_cv_use_catgets" = "yes"; then
- dnl No gettext in C library. Try catgets next.
- AC_CHECK_LIB(i, main)
- AC_CHECK_FUNC(catgets,
- [AC_DEFINE(HAVE_CATGETS)
- INTLOBJS="\$(CATOBJS)"
- AC_PATH_PROG(GENCAT, gencat, no)dnl
- if test "$GENCAT" != "no"; then
- AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
- if test "$GMSGFMT" = "no"; then
- AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
- fi
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.cat
- INSTOBJEXT=.cat
- DATADIRNAME=lib
- INTLDEPS="../intl/libintl.a"
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi])
- fi
- fi
-
- if test "$CATOBJEXT" = "NONE"; then
- dnl Neither gettext nor catgets in included in the C library.
- dnl Fall back on GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- INTLOBJS="\$(GETTOBJS)"
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_SUBST(MSGFMT)
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS="../intl/libintl.a"
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
-
- dnl Test whether we really found GNU xgettext.
- if test "$XGETTEXT" != ":"; then
- dnl If it is no GNU xgettext we define it as : so that the
- dnl Makefiles still can work.
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
- : ;
- else
- AC_MSG_RESULT(
- [found xgettext programs is not GNU xgettext; ignore it])
- XGETTEXT=":"
- fi
- fi
-
- # We need to process the po/ directory.
- POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
-
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
- if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
- fi
-
- dnl These rules are solely for the distribution goal. While doing this
- dnl we only have to keep exactly one list of the available catalogs
- dnl in configure.in.
- for lang in $ALL_LINGUAS; do
- GMOFILES="$GMOFILES $lang.gmo"
- POFILES="$POFILES $lang.po"
- done
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST(USE_INCLUDED_LIBINTL)
- AC_SUBST(CATALOGS)
- AC_SUBST(CATOBJEXT)
- AC_SUBST(DATADIRNAME)
- AC_SUBST(GMOFILES)
- AC_SUBST(INSTOBJEXT)
- AC_SUBST(INTLDEPS)
- AC_SUBST(INTLLIBS)
- AC_SUBST(INTLOBJS)
- AC_SUBST(POFILES)
- AC_SUBST(POSUB)
- ])
-
-AC_DEFUN(AM_GNU_GETTEXT,
- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_ISC_POSIX])dnl
- AC_REQUIRE([AC_HEADER_STDC])dnl
- AC_REQUIRE([AC_C_CONST])dnl
- AC_REQUIRE([AC_C_INLINE])dnl
- AC_REQUIRE([AC_TYPE_OFF_T])dnl
- AC_REQUIRE([AC_TYPE_SIZE_T])dnl
- AC_REQUIRE([AC_FUNC_ALLOCA])dnl
- AC_REQUIRE([AC_FUNC_MMAP])dnl
-
- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h values.h])
- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
- AC_CHECK_FUNCS(stpcpy)
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
- AC_DEFINE(HAVE_STPCPY)
- fi
-
- AM_LC_MESSAGES
- AM_WITH_NLS
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
- AC_MSG_CHECKING(for catalogs to be installed)
- NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
- AC_MSG_RESULT($LINGUAS)
- fi
-
- dnl Construct list of names of catalog files to be constructed.
- if test -n "$LINGUAS"; then
- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
- fi
- fi
-
- dnl Determine which catalog format we have (if any is needed)
- dnl For now we know about two different formats:
- dnl Linux libc-5 and the normal X/Open format
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
- dnl Transform the SED scripts while copying because some dumb SEDs
- dnl cannot handle comments.
- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
- fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
- dnl In the intl/Makefile.in we have a special dependency which makes
- dnl only sense for gettext. We comment this out for non-gettext
- dnl packages.
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
- AC_SUBST(GT_NO)
- AC_SUBST(GT_YES)
-
- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
- dnl Try to locate is.
- MKINSTALLDIRS=
- if test $ac_aux_dir; then
- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
- fi
- if test -z $MKINSTALLDIRS; then
- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
- fi
- AC_SUBST(MKINSTALLDIRS)
-
- dnl Configure the intl/Makefile for shared libs.
- if test "${enable_shared+set}" = set; then
- l=l
- else
- l=
- fi
- AC_SUBST(l)
-
- dnl Generate list of files to be processed by xgettext which will
- dnl be included in po/Makefile.
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
- fi
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
- ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
- /*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
- AC_MSG_RESULT([$]$1)
-else
- AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
- [if test $ac_cv_header_locale_h = yes; then
- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
- if test $am_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES)
- fi
- fi])
-
dnl Check longest integer in digits.
AC_DEFUN([BLP_INT_DIGITS],
fi,
eval "blp_int_digits=19")
])
-AC_DEFINE_UNQUOTED(INT_DIGITS, $blp_int_digits)
-AC_MSG_RESULT($blp_int_digits)
-])dnl
+AC_DEFINE_UNQUOTED([INT_DIGITS], $blp_int_digits,
+ [Number of digits in longest `long' value, including sign.
+ This is usually 11, for 32-bit `long's, or 19, for 64-bit
+ `long's.])
+AC_MSG_RESULT($blp_int_digits) ])dnl
dnl Check quality of this machine's sprintf implementation.
eval "blp_is_sprintf_good=no")
])
if test "$blp_is_sprintf_good" = yes; then
- AC_DEFINE(HAVE_GOOD_SPRINTF)
+ AC_DEFINE([HAVE_GOOD_SPRINTF], 1,
+ [Define if sprintf() returns the number of characters written
+ to the destination string, excluding the null terminator.])
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
AC_TRY_COMPILE([#include <stdlib.h>], [int x=RAND_MAX;],
blp_random_good=yes, blp_random_good=no))
if test "$blp_random_good" = yes; then
- AC_DEFINE(HAVE_GOOD_RANDOM)
+ AC_DEFINE([HAVE_GOOD_RANDOM], 1,
+ [Define if rand() and company work according to ANSI.])
AC_MSG_RESULT(good)
else
AC_MSG_RESULT(bad)
-dnl aclocal.m4 generated automatically by aclocal 1.4
+# generated automatically by aclocal 1.7.9 -*- Autoconf -*-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-dnl --------------------------------------------------------- ##
-dnl The following definitions are from gettext-0.10.27. ##
-dnl --------------------------------------------------------- ##
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 2
-
-AC_DEFUN(AM_WITH_NLS,
- [AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE(nls,
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT($USE_NLS)
- AC_SUBST(USE_NLS)
-
- USE_INCLUDED_LIBINTL=no
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- AC_DEFINE(ENABLE_NLS)
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH(included-gettext,
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If gettext or catgets are available (in this order) we
- dnl use this. Else we have to fall back to GNU NLS library.
- dnl catgets is only used if permitted by option --with-catgets.
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
-
- AC_CHECK_HEADER(libintl.h,
- [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
- [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
- gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- AC_CHECK_LIB(intl, bindtextdomain,
- [AC_CACHE_CHECK([for gettext in libintl],
- gt_cv_func_gettext_libintl,
- [AC_TRY_LINK([], [return (int) gettext ("")],
- gt_cv_func_gettext_libintl=yes,
- gt_cv_func_gettext_libintl=no)])])
- fi
-
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
- AC_DEFINE(HAVE_GETTEXT)
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
- if test "$MSGFMT" != "no"; then
- AC_CHECK_FUNCS(dcgettext)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr],
- [CATOBJEXT=.gmo
- DATADIRNAME=share],
- [CATOBJEXT=.mo
- DATADIRNAME=lib])
- INSTOBJEXT=.mo
- fi
- fi
- ])
-
- if test "$CATOBJEXT" = "NONE"; then
- AC_MSG_CHECKING([whether catgets can be used])
- AC_ARG_WITH(catgets,
- [ --with-catgets use catgets functions if available],
- nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
- AC_MSG_RESULT($nls_cv_use_catgets)
-
- if test "$nls_cv_use_catgets" = "yes"; then
- dnl No gettext in C library. Try catgets next.
- AC_CHECK_LIB(i, main)
- AC_CHECK_FUNC(catgets,
- [AC_DEFINE(HAVE_CATGETS)
- INTLOBJS="\$(CATOBJS)"
- AC_PATH_PROG(GENCAT, gencat, no)dnl
- if test "$GENCAT" != "no"; then
- AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
- if test "$GMSGFMT" = "no"; then
- AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
- fi
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.cat
- INSTOBJEXT=.cat
- DATADIRNAME=lib
- INTLDEPS="../intl/libintl.a"
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi])
- fi
- fi
-
- if test "$CATOBJEXT" = "NONE"; then
- dnl Neither gettext nor catgets in included in the C library.
- dnl Fall back on GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- INTLOBJS="\$(GETTOBJS)"
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
- AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
- AC_SUBST(MSGFMT)
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS="../intl/libintl.a"
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
-
- dnl Test whether we really found GNU xgettext.
- if test "$XGETTEXT" != ":"; then
- dnl If it is no GNU xgettext we define it as : so that the
- dnl Makefiles still can work.
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
- : ;
- else
- AC_MSG_RESULT(
- [found xgettext programs is not GNU xgettext; ignore it])
- XGETTEXT=":"
- fi
- fi
-
- # We need to process the po/ directory.
- POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
-
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
- if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
- fi
-
- dnl These rules are solely for the distribution goal. While doing this
- dnl we only have to keep exactly one list of the available catalogs
- dnl in configure.in.
- for lang in $ALL_LINGUAS; do
- GMOFILES="$GMOFILES $lang.gmo"
- POFILES="$POFILES $lang.po"
- done
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST(USE_INCLUDED_LIBINTL)
- AC_SUBST(CATALOGS)
- AC_SUBST(CATOBJEXT)
- AC_SUBST(DATADIRNAME)
- AC_SUBST(GMOFILES)
- AC_SUBST(INSTOBJEXT)
- AC_SUBST(INTLDEPS)
- AC_SUBST(INTLLIBS)
- AC_SUBST(INTLOBJS)
- AC_SUBST(POFILES)
- AC_SUBST(POSUB)
- ])
-
-AC_DEFUN(AM_GNU_GETTEXT,
- [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_CC])dnl
- AC_REQUIRE([AC_ISC_POSIX])dnl
- AC_REQUIRE([AC_HEADER_STDC])dnl
- AC_REQUIRE([AC_C_CONST])dnl
- AC_REQUIRE([AC_C_INLINE])dnl
- AC_REQUIRE([AC_TYPE_OFF_T])dnl
- AC_REQUIRE([AC_TYPE_SIZE_T])dnl
- AC_REQUIRE([AC_FUNC_ALLOCA])dnl
- AC_REQUIRE([AC_FUNC_MMAP])dnl
-
- AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h values.h])
- AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
- AC_CHECK_FUNCS(stpcpy)
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
- AC_DEFINE(HAVE_STPCPY)
- fi
-
- AM_LC_MESSAGES
- AM_WITH_NLS
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
- AC_MSG_CHECKING(for catalogs to be installed)
- NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
- AC_MSG_RESULT($LINGUAS)
- fi
-
- dnl Construct list of names of catalog files to be constructed.
- if test -n "$LINGUAS"; then
- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
- fi
- fi
-
- dnl Determine which catalog format we have (if any is needed)
- dnl For now we know about two different formats:
- dnl Linux libc-5 and the normal X/Open format
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
- AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
- dnl Transform the SED scripts while copying because some dumb SEDs
- dnl cannot handle comments.
- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
- fi
- dnl po2tbl.sed is always needed.
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
- dnl In the intl/Makefile.in we have a special dependency which makes
- dnl only sense for gettext. We comment this out for non-gettext
- dnl packages.
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
- AC_SUBST(GT_NO)
- AC_SUBST(GT_YES)
-
- dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
- dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
- dnl Try to locate is.
- MKINSTALLDIRS=
- if test $ac_aux_dir; then
- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
- fi
- if test -z $MKINSTALLDIRS; then
- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
- fi
- AC_SUBST(MKINSTALLDIRS)
-
- dnl Configure the intl/Makefile for shared libs.
- if test "${enable_shared+set}" = set; then
- l=l
- else
- l=
- fi
- AC_SUBST(l)
-
- dnl Generate list of files to be processed by xgettext which will
- dnl be included in po/Makefile.
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
- fi
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
- ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
- /*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
- AC_MSG_RESULT([$]$1)
-else
- AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
- [if test $ac_cv_header_locale_h = yes; then
- AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
- [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
- am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
- if test $am_cv_val_LC_MESSAGES = yes; then
- AC_DEFINE(HAVE_LC_MESSAGES)
- fi
- fi])
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
dnl Check longest integer in digits.
fi,
eval "blp_int_digits=19")
])
-AC_DEFINE_UNQUOTED(INT_DIGITS, $blp_int_digits)
-AC_MSG_RESULT($blp_int_digits)
-])dnl
+AC_DEFINE_UNQUOTED([INT_DIGITS], $blp_int_digits,
+ [Number of digits in longest `long' value, including sign.
+ This is usually 11, for 32-bit `long's, or 19, for 64-bit
+ `long's.])
+AC_MSG_RESULT($blp_int_digits) ])dnl
dnl Check quality of this machine's sprintf implementation.
eval "blp_is_sprintf_good=no")
])
if test "$blp_is_sprintf_good" = yes; then
- AC_DEFINE(HAVE_GOOD_SPRINTF)
+ AC_DEFINE([HAVE_GOOD_SPRINTF], 1,
+ [Define if sprintf() returns the number of characters written
+ to the destination string, excluding the null terminator.])
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
AC_TRY_COMPILE([#include <stdlib.h>], [int x=RAND_MAX;],
blp_random_good=yes, blp_random_good=no))
if test "$blp_random_good" = yes; then
- AC_DEFINE(HAVE_GOOD_RANDOM)
+ AC_DEFINE([HAVE_GOOD_RANDOM], 1,
+ [Define if rand() and company work according to ANSI.])
AC_MSG_RESULT(good)
else
AC_MSG_RESULT(bad)
dnl aclocal.m4 ends here
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated. We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
- case " <<$>>CONFIG_HEADERS " in
- *" <<$>>am_file "*<<)>>
- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
- ;;
- esac
- am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
+# Do all the work for Automake. -*- Autoconf -*-
+
+# This macro actually does too much some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 10
+
+AC_PREREQ([2.54])
+
+# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
+# the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
-# serial 1
-# @defmac AC_PROG_CC_STDC
-# @maindex PROG_CC_STDC
-# @ovindex CC
-# If the C compiler in not in ANSI C mode by default, try to add an option
-# to output variable @code{CC} to make it so. This macro tries various
-# options that select ANSI C on some system or another. It considers the
-# compiler to be in ANSI C mode if it handles function prototypes correctly.
-#
-# If you use this macro, you should check after calling it whether the C
-# compiler has been set to accept ANSI C; if not, the shell variable
-# @code{am_cv_prog_cc_stdc} is set to @samp{no}. If you wrote your source
-# code in ANSI C, you can make an un-ANSIfied copy of it by using the
-# program @code{ansi2knr}, which comes with Ghostscript.
-# @end defmac
-
-AC_DEFUN(AM_PROG_CC_STDC,
-[AC_REQUIRE([AC_PROG_CC])
-AC_BEFORE([$0], [AC_C_INLINE])
-AC_BEFORE([$0], [AC_C_CONST])
-dnl Force this before AC_PROG_CPP. Some cpp's, eg on HPUX, require
-dnl a magic option to avoid problems with ANSI preprocessor commands
-dnl like #elif.
-dnl FIXME: can't do this because then AC_AIX won't work due to a
-dnl circular dependency.
-dnl AC_BEFORE([$0], [AC_PROG_CPP])
-AC_MSG_CHECKING(for ${CC-cc} option to accept ANSI C)
-AC_CACHE_VAL(am_cv_prog_cc_stdc,
-[am_cv_prog_cc_stdc=no
-ac_save_CC="$CC"
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- AC_TRY_COMPILE(
-[#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-], [
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
-],
-[am_cv_prog_cc_stdc="$ac_arg"; break])
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
done
-CC="$ac_save_CC"
-])
-if test -z "$am_cv_prog_cc_stdc"; then
- AC_MSG_RESULT([none needed])
-else
- AC_MSG_RESULT($am_cv_prog_cc_stdc)
-fi
-case "x$am_cv_prog_cc_stdc" in
- x|xno) ;;
- *) CC="$CC $am_cv_prog_cc_stdc" ;;
-esac
-])
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-# Do all the work for Automake. This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
+# Copyright 2002 Free Software Foundation, Inc.
-# serial 1
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.7.9])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
#
# Check to make sure that the build environment is sane.
#
-AC_DEFUN(AM_SANITY_CHECK,
+# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
-echo timestamp > conftestfile
+echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "[$]*" = "X"; then
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
+ set X `ls -t $srcdir/configure conftest.file`
fi
- if test "[$]*" != "X $srcdir/configure conftestfile" \
- && test "[$]*" != "X conftestfile $srcdir/configure"; then
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
alias in your environment])
fi
- test "[$]2" = conftestfile
+ test "$[2]" = conftest.file
)
then
# Ok.
AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
-rm -f conftest*
AC_MSG_RESULT(yes)])
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
- $1=$2
- AC_MSG_RESULT(found)
+# -*- Autoconf -*-
+
+
+# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
else
- $1="$3/missing $2"
- AC_MSG_RESULT(missing)
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
fi
-AC_SUBST($1)])
+])
+
+# AM_AUX_DIR_EXPAND
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+# Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_AUX_DIR_EXPAND], [
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# AM_PROG_INSTALL_STRIP
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# -*- Autoconf -*-
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
# serial 1
-AC_DEFUN(AM_C_PROTOTYPES,
-[AC_REQUIRE([AM_PROG_CC_STDC])
-AC_REQUIRE([AC_PROG_CPP])
-AC_MSG_CHECKING([for function prototypes])
-if test "$am_cv_prog_cc_stdc" != no; then
- AC_MSG_RESULT(yes)
- AC_DEFINE(PROTOTYPES,1,[Define if compiler has function prototypes])
- U= ANSI2KNR=
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# serial 5 -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ : > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored.
+ if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking Speeds up one-time builds
+ --enable-dependency-tracking Do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+#serial 2
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
+ # Extract the definition of DEP_FILES from the Makefile without
+ # running `make'.
+ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n -e '/^U = / s///p' < "$mf"`
+ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+ # We invoke sed twice because it is the simplest approach to
+ # changing $(DEPDIR) to its actual value in the expansion.
+ for file in `sed -n -e '
+ /^DEP_FILES = .*\\\\$/ {
+ s/^DEP_FILES = //
+ :loop
+ s/\\\\$//
+ p
+ n
+ /\\\\$/ b loop
+ p
+ }
+ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 5
+
+AC_PREREQ(2.52)
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.])
+fi])])
+
+# gettext.m4 serial 20 (gettext-0.12)
+dnl Copyright (C) 1995-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl default (if it is not specified or empty) is 'no-libtool'.
+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored. If NEEDSYMBOL is specified and is
+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
+dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+ dnl Argument checking.
+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+ define(gt_included_intl, ifelse([$1], [external], [no], [yes]))
+ define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], []))
+
+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
+ ifelse(gt_included_intl, yes, [
+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
+ ])
+
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ dnl Ideally we would do this search only after the
+ dnl if test "$USE_NLS" = "yes"; then
+ dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl the configure script would need to contain the same shell code
+ dnl again, outside any 'if'. There are two solutions:
+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+ dnl documented, we avoid it.
+ ifelse(gt_included_intl, yes, , [
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+ ])
+
+ dnl Set USE_NLS.
+ AM_NLS
+
+ ifelse(gt_included_intl, yes, [
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ ])
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+ ifelse(gt_included_intl, yes, [
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ ])
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+
+ dnl Add a version number to the cache macros.
+ define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1)))
+ define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc])
+ define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl])
+
+ AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings],
+ gt_cv_func_gnugettext_libc=yes,
+ gt_cv_func_gnugettext_libc=no)])
+
+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ ifelse(gt_included_intl, yes, , [
+ AM_ICONV_LINK
+ ])
+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+ dnl even if libiconv doesn't exist.
+ AC_LIB_LINKFLAGS_BODY([intl])
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ gt_cv_func_gnugettext_libintl,
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ dnl Now see whether libintl exists and does not depend on libiconv.
+ AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
+ gt_cv_func_gnugettext_libintl=yes,
+ gt_cv_func_gnugettext_libintl=no)
+ dnl Now see whether libintl exists and depends on libiconv.
+ if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();],
+ [bindtextdomain ("", "");
+return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)],
+ [LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ gt_cv_func_gnugettext_libintl=yes
+ ])
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
+ || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ dnl Reset the values set by searching for libintl.
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on included GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV"
+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions to use GNU gettext tools.
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ AC_MSG_CHECKING([whether to use NLS])
+ AC_MSG_RESULT([$USE_NLS])
+ if test "$USE_NLS" = "yes"; then
+ AC_MSG_CHECKING([where the gettext function comes from])
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ AC_MSG_RESULT([$gt_source])
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ AC_MSG_CHECKING([how to link with libintl])
+ AC_MSG_RESULT([$LIBINTL])
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+ fi
+
+ dnl For backward compatibility. Some packages may be using this.
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_DEFINE(HAVE_DCGETTEXT, 1,
+ [Define if the GNU dcgettext() function is already present or preinstalled.])
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATOBJEXT)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST(INSTOBJEXT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST(GENCAT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ if test "$USE_INCLUDED_LIBINTL" = yes; then
+ INTLOBJS="\$(GETTOBJS)"
+ fi
+ AC_SUBST(INTLOBJS)
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
+ ])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLLIBS="$LIBINTL"
+ AC_SUBST(INTLLIBS)
+
+ dnl Make all documented variables known to autoconf.
+ AC_SUBST(LIBINTL)
+ AC_SUBST(LTLIBINTL)
+ AC_SUBST(POSUB)
+])
+
+
+dnl Checks for all prerequisites of the intl subdirectory,
+dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS,
+dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL.
+AC_DEFUN([AM_INTL_SUBDIR],
+[
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_ISC_POSIX])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_C_CONST])dnl
+ AC_REQUIRE([AC_C_INLINE])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+ AC_REQUIRE([jm_GLIBC21])dnl
+ AC_REQUIRE([gt_INTDIV0])dnl
+ AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl
+ AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl
+ AC_REQUIRE([gt_INTTYPES_PRI])dnl
+
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h])
+ AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \
+geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \
+strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \
+__fsetlocking])
+
+ AM_ICONV
+ AM_LANGINFO_CODESET
+ if test $ac_cv_header_locale_h = yes; then
+ AM_LC_MESSAGES
+ fi
+
+ dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+ dnl because plural.y uses bison specific features. It requires at least
+ dnl bison-1.26 because earlier versions generate a plural.c that doesn't
+ dnl compile.
+ dnl bison is only needed for the maintainer (who touches plural.y). But in
+ dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+ dnl the rule in general Makefile. Now, some people carelessly touch the
+ dnl files or have a broken "make" program, hence the plural.c rule will
+ dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+ dnl present or too old.
+ AC_CHECK_PROGS([INTLBISON], [bison])
+ if test -z "$INTLBISON"; then
+ ac_verc_fail=yes
+ else
+ dnl Found it, now check the version.
+ AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+changequote([,])dnl
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac
+ AC_MSG_RESULT([$ac_prog_version])
+ fi
+ if test $ac_verc_fail = yes; then
+ INTLBISON=:
+ fi
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
+
+# po.m4 serial 1 (gettext-0.12)
+dnl Copyright (C) 1995-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+ AC_REQUIRE([AM_NLS])dnl
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ dnl Search for GNU xgettext 0.12 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :)
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU msgfmt.
+ if test "$GMSGFMT" != ":"; then
+ dnl If it is no GNU msgfmt we define it as : so that the
+ dnl Makefiles still can work.
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
+ (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
+ AC_MSG_RESULT(
+ [found $GMSGFMT program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ fi
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 &&
+ (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext program is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+ fi
+
+ AC_OUTPUT_COMMANDS([
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ GMOFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it
+ # from automake.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+# nls.m4 serial 1 (gettext-0.12)
+dnl Copyright (C) 1995-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_DEFUN([AM_NLS],
+[
+ AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+])
+
+AC_DEFUN([AM_MKINSTALLDIRS],
+[
+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+ dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
+ dnl Try to locate it.
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ case "$ac_aux_dir" in
+ /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;;
+ *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;;
+ esac
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
+ AC_SUBST(MKINSTALLDIRS)
+])
+
+# progtest.m4 serial 3 (gettext-0.12)
+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ [[\\/]]* | ?:[[\\/]]*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
else
AC_MSG_RESULT(no)
- U=_ ANSI2KNR=./ansi2knr
- # Ensure some checks needed by ansi2knr itself.
- AC_HEADER_STDC
- AC_CHECK_HEADERS(string.h)
fi
-AC_SUBST(U)dnl
-AC_SUBST(ANSI2KNR)dnl
+AC_SUBST($1)dnl
+])
+
+# lib-prefix.m4 serial 2 (gettext-0.12)
+dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
+
+# lib-link.m4 serial 4 (gettext-0.12)
+dnl Copyright (C) 2001-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. If found, it
+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIB[]NAME"
+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib$1-prefix],
+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
+
+# lib-ld.m4 serial 2 (gettext-0.12)
+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ [re_direlt='/[^/][^/]*/\.\./']
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(acl_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
+
+# iconv.m4 serial AM4 (gettext-0.11.3)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. The first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ AC_MSG_CHECKING([how to link with libiconv])
+ AC_MSG_RESULT([$LIBICONV])
+ else
+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+ dnl either.
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+ AC_SUBST(LIBICONV)
+ AC_SUBST(LTLIBICONV)
+])
+
+AC_DEFUN([AM_ICONV],
+[
+ AM_ICONV_LINK
+ if test "$am_cv_func_iconv" = yes; then
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+])
+
+# isc-posix.m4 serial 2 (gettext-0.11.2)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
+
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
+
+# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# Test for the GNU C Library, version 2.1 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([jm_GLIBC21],
+ [
+ AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
+ ac_cv_gnu_library_2_1,
+ [AC_EGREP_CPP([Lucky GNU user],
+ [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+ Lucky GNU user
+ #endif
+#endif
+ ],
+ ac_cv_gnu_library_2_1=yes,
+ ac_cv_gnu_library_2_1=no)
+ ]
+ )
+ AC_SUBST(GLIBC21)
+ GLIBC21="$ac_cv_gnu_library_2_1"
+ ]
+)
+
+# intdiv0.m4 serial 1 (gettext-0.11.3)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gt_INTDIV0],
+[
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+ AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
+ gt_cv_int_divbyzero_sigfpe,
+ [
+ AC_TRY_RUN([
+#include <stdlib.h>
+#include <signal.h>
+
+static void
+#ifdef __cplusplus
+sigfpe_handler (int sig)
+#else
+sigfpe_handler (sig) int sig;
+#endif
+{
+ /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */
+ exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int nan;
+
+int main ()
+{
+ signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+ signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL. */
+#if defined (__sparc__) && defined (__linux__)
+ signal (SIGILL, sigfpe_handler);
+#endif
+
+ z = x / y;
+ nan = y / y;
+ exit (1);
+}
+], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no,
+ [
+ # Guess based on the CPU.
+ case "$host_cpu" in
+ alpha* | i[34567]86 | m68k | s390*)
+ gt_cv_int_divbyzero_sigfpe="guessing yes";;
+ *)
+ gt_cv_int_divbyzero_sigfpe="guessing no";;
+ esac
+ ])
+ ])
+ case "$gt_cv_int_divbyzero_sigfpe" in
+ *yes) value=1;;
+ *) value=0;;
+ esac
+ AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value,
+ [Define if integer division by zero raises signal SIGFPE.])
+])
+
+# uintmax_t.m4 serial 7 (gettext-0.12)
+dnl Copyright (C) 1997-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define uintmax_t to 'unsigned long' or 'unsigned long long'
+# if it is not already defined in <stdint.h> or <inttypes.h>.
+
+AC_DEFUN([jm_AC_TYPE_UINTMAX_T],
+[
+ AC_REQUIRE([jm_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([jm_AC_HEADER_STDINT_H])
+ if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then
+ AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG])
+ test $ac_cv_type_unsigned_long_long = yes \
+ && ac_type='unsigned long long' \
+ || ac_type='unsigned long'
+ AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
+ [Define to unsigned long or unsigned long long
+ if <stdint.h> and <inttypes.h> don't define.])
+ else
+ AC_DEFINE(HAVE_UINTMAX_T, 1,
+ [Define if you have the 'uintmax_t' type in <stdint.h> or <inttypes.h>.])
+ fi
+])
+
+# inttypes_h.m4 serial 5 (gettext-0.12)
+dnl Copyright (C) 1997-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_inttypes_h=yes,
+ jm_ac_cv_header_inttypes_h=no)])
+ if test $jm_ac_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
+ [Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
+])
+
+# stdint_h.m4 serial 3 (gettext-0.12)
+dnl Copyright (C) 1997-2003 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([jm_AC_HEADER_STDINT_H],
+[
+ AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <stdint.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ jm_ac_cv_header_stdint_h=yes,
+ jm_ac_cv_header_stdint_h=no)])
+ if test $jm_ac_cv_header_stdint_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
+ [Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
+])
+
+# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40)
+dnl Copyright (C) 1999-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG],
+[
+ AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
+ [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;],
+ [unsigned long long ullmax = (unsigned long long) -1;
+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
+ ac_cv_type_unsigned_long_long=yes,
+ ac_cv_type_unsigned_long_long=no)])
+ if test $ac_cv_type_unsigned_long_long = yes; then
+ AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1,
+ [Define if you have the unsigned long long type.])
+ fi
+])
+
+# inttypes.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H if <inttypes.h> exists and doesn't clash with
+# <sys/types.h>.
+
+AC_DEFUN([gt_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h,
+ [
+ AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no)
+ ])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
+ [Define if <inttypes.h> exists and doesn't clash with <sys/types.h>.])
+ fi
+])
+
+# inttypes-pri.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+# Define PRI_MACROS_BROKEN if <inttypes.h> exists and defines the PRI*
+# macros to non-string values. This is the case on AIX 4.3.3.
+
+AC_DEFUN([gt_INTTYPES_PRI],
+[
+ AC_REQUIRE([gt_HEADER_INTTYPES_H])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
+ gt_cv_inttypes_pri_broken,
+ [
+ AC_TRY_COMPILE([#include <inttypes.h>
+#ifdef PRId32
+char *p = PRId32;
+#endif
+], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes)
+ ])
+ fi
+ if test "$gt_cv_inttypes_pri_broken" = yes; then
+ AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1,
+ [Define if <inttypes.h> exists and defines unusable PRI* macros.])
+ fi
+])
+
+# codeset.m4 serial AM1 (gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+ [AC_TRY_LINK([#include <langinfo.h>],
+ [char* cs = nl_langinfo(CODESET);],
+ am_cv_langinfo_codeset=yes,
+ am_cv_langinfo_codeset=no)
+ ])
+ if test $am_cv_langinfo_codeset = yes; then
+ AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+ [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+ fi
+])
+
+# lcmessage.m4 serial 3 (gettext-0.11.3)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+
+AC_DEFUN([AM_LC_MESSAGES],
+[
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your <locale.h> file defines LC_MESSAGES.])
+ fi
])
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+timestamp='2003-10-07'
+
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
-# Written by Per Bothner <bothner@cygnus.com>.
-# The master version of this file is at the FSF in /home/gd/gnu/lib.
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
#
# This script attempts to guess a canonical system name similar to
# config.sub. If it succeeds, it prints the system name on stdout, and
# exits with 0. Otherwise, it exits with 1.
#
# The plan is that this can be called by configure scripts if you
-# don't specify an explicit system type (host/target name).
-#
-# Only a few systems have been added to this list; please add others
-# (but try to keep the structure clean).
-#
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --version | -v )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ;'
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 8/24/94.)
+# (ghazi@noc.rutgers.edu 1994-08-24)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
-
# Note: order is significant - the case branches are not exclusive.
case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- alpha:OSF1:V*:*)
- # After 1.2, OSF1 uses "V1.3" for uname -r.
- echo alpha-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^V//'`
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ macppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvmeppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mipseb-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
alpha:OSF1:*:*)
+ if test $UNAME_RELEASE = "V4.0"; then
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ fi
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- echo alpha-dec-osf${UNAME_RELEASE}
- exit 0 ;;
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha*:OpenVMS:*:*)
+ echo alpha-hp-vms
+ exit 0 ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit 0 ;;
21064:Windows_NT:50:3)
echo alpha-dec-winnt3.5
exit 0 ;;
- amiga:NetBSD:*:*)
- echo m68k-cbm-netbsd${UNAME_RELEASE}
- exit 0 ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit 0;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit 0 ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit 0 ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
- Pyramid*:OSx*:*:*)
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit 0;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
if test "`(/bin/universe) 2>/dev/null`" = att ; then
echo pyramid-pyramid-sysv3
else
echo pyramid-pyramid-bsd
fi
exit 0 ;;
- sun4*:SunOS:5.*:*)
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit 0 ;;
+ DRS?6000:UNIX_SV:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7 && exit 0 ;;
+ esac ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
i86pc:SunOS:5.*:*)
- echo i386-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
sun3*:SunOS:*:*)
echo m68k-sun-sunos${UNAME_RELEASE}
exit 0 ;;
- atari*:NetBSD:*:*)
- echo m68k-atari-netbsd${UNAME_RELEASE}
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
exit 0 ;;
- sun3*:NetBSD:*:*)
- echo m68k-sun-netbsd${UNAME_RELEASE}
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit 0 ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit 0 ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit 0 ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
exit 0 ;;
- mac68k:NetBSD:*:*)
- echo m68k-apple-netbsd${UNAME_RELEASE}
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
exit 0 ;;
RISC*:ULTRIX:*:*)
echo mips-dec-ultrix${UNAME_RELEASE}
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
- mips:*:5*:RISCos)
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c \
+ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && exit 0
echo mips-mips-riscos${UNAME_RELEASE}
exit 0 ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit 0 ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit 0 ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
m88k:CX/UX:7*:*)
echo m88k-harris-cxux7
exit 0 ;;
echo m88k-motorola-sysv3
exit 0 ;;
AViiON:dgux:*:*)
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
- -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
echo m88k-dg-dgux${UNAME_RELEASE}
- else
+ else
echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
fi
exit 0 ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
*:IRIX*:*:*)
echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i[34]86:AIX:*:*)
+ i*86:AIX:*:*)
echo i386-ibm-aix
exit 0 ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit 0 ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- sed 's/^ //' << EOF >dummy.c
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
#include <sys/systemcfg.h>
main()
exit(0);
}
EOF
- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
echo rs6000-ibm-aix3.2.5
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
echo rs6000-ibm-aix3.2.4
echo rs6000-ibm-aix3.2
fi
exit 0 ;;
- *:AIX:*:4)
- if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
+ *:AIX:*:[45])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
- if grep bos410 /usr/include/stdio.h >/dev/null 2>&1; then
- IBM_REV=4.1
- elif grep bos411 /usr/include/stdio.h >/dev/null 2>&1; then
- IBM_REV=4.1.1
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
else
- IBM_REV=4.${UNAME_RELEASE}
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
fi
echo ${IBM_ARCH}-ibm-aix${IBM_REV}
exit 0 ;;
ibmrt:4.4BSD:*|romp-ibm:BSD:*)
echo romp-ibm-bsd4.4
exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
exit 0 ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
echo m68k-hp-bsd4.4
exit 0 ;;
- 9000/[3478]??:HP-UX:*:*)
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
case "${UNAME_MACHINE}" in
9000/31? ) HP_ARCH=m68000 ;;
9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/7?? | 9000/8?7 ) HP_ARCH=hppa1.1 ;;
- 9000/8?? ) HP_ARCH=hppa1.0 ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
esac
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ # avoid double evaluation of $set_cc_for_build
+ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
exit 0 ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit 0 ;;
3050*:HI-UX:*:*)
- sed 's/^ //' << EOF >dummy.c
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
#include <unistd.h>
int
main ()
exit (0);
}
EOF
- ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy
+ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
echo unknown-hitachi-hiuxwe2
exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?7:4.3bsd:*:* )
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
echo hppa1.1-hp-bsd
exit 0 ;;
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
exit 0 ;;
- hp7??:OSF1:*:* | hp8?7:OSF1:*:* )
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
exit 0 ;;
hp8??:OSF1:*:*)
echo hppa1.0-hp-osf
exit 0 ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit 0 ;;
parisc*:Lites*:*:*)
echo hppa1.1-hp-lites
exit 0 ;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
echo c4-convex-bsd
exit 0 ;;
- CRAY*X-MP:*:*:*)
- echo xmp-cray-unicos
- exit 0 ;;
CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE}
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
- CRAY*C90:*:*:*)
- echo c90-cray-unicos${UNAME_RELEASE}
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
- CRAY-2:*:*:*)
- echo cray2-cray-unicos
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ *:UNICOS/mp:*:*)
+ echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
- hp3[0-9][05]:NetBSD:*:*)
- echo m68k-hp-netbsd${UNAME_RELEASE}
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
- i[34]86:BSD/386:*:* | *:BSD/OS:*:*)
+ *:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
*:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ # Determine whether the default compiler uses glibc.
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #if __GLIBC__ >= 2
+ LIBC=gnu
+ #else
+ LIBC=
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+ # GNU/KFreeBSD systems have a "k" prefix to indicate we are using
+ # FreeBSD's kernel, but not the complete OS.
+ case ${LIBC} in gnu) kernel_only='k' ;; esac
+ echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
exit 0 ;;
- *:NetBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit 0 ;;
+ i*:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit 0 ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit 0 ;;
+ x86:Interix*:[34]*)
+ echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+ exit 0 ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit 0 ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit 0 ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit 0 ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
*:GNU:*:*)
- echo `echo ${UNAME_MACHINE}|sed -e 's,/.*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit 0 ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit 0 ;;
+ arm*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit 0 ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ mips:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips
+ #undef mipsel
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mipsel
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef mips64
+ #undef mips64el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=mips64el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips64
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit 0 ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit 0 ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit 0 ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
exit 0 ;;
- *:Linux:*:*)
- # Systems without a BFD linker
- if test -d /usr/lib/ldscripts/. ; then
- :
- else
- echo "${UNAME_MACHINE}-unknown-linuxoldld"
- exit 0
- fi
- # Determine whether the default compiler is a.out or elf
- cat >dummy.c <<EOF
-main(argc, argv)
-int argc;
-char *argv[];
-{
-#ifdef __ELF__
- printf ("%s-unknown-linux\n", argv[1]);
-#else
- printf ("%s-unknown-linuxaout\n", argv[1]);
-#endif
- return 0;
-}
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit 0 ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit 0 ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit 0 ;;
+ i*86:Linux:*:*)
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+ # Set LC_ALL=C to ensure ld outputs messages in English.
+ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+ | sed -ne '/supported targets:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported targets: *//
+ s/ .*//
+ p'`
+ case "$ld_supported_targets" in
+ elf32-i386)
+ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ ;;
+ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit 0 ;;
+ coff-i386)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+ exit 0 ;;
+ "")
+ # Either a pre-BFD a.out linker (linux-gnuoldld) or
+ # one that does not give us useful --help.
+ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+ exit 0 ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <features.h>
+ #ifdef __ELF__
+ # ifdef __GLIBC__
+ # if __GLIBC__ >= 2
+ LIBC=gnu
+ # else
+ LIBC=gnulibc1
+ # endif
+ # else
+ LIBC=gnulibc1
+ # endif
+ #else
+ #ifdef __INTEL_COMPILER
+ LIBC=gnu
+ #else
+ LIBC=gnuaout
+ #endif
+ #endif
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
EOF
- ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
- rm -f dummy.c dummy;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
-# are messed up and put the nodename in both sysname and nodename.
- i[34]86:DYNIX/ptx:4*:*)
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+ test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
+ test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
echo i386-sequent-sysv4
exit 0 ;;
- i[34]86:*:4.*:* | i[34]86:SYSTEM_V:4.*:*)
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit 0 ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit 0 ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit 0 ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit 0 ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
else
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
fi
exit 0 ;;
- i[34]86:*:3.2:*)
+ i*86:*:5:[78]*)
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit 0 ;;
+ i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-unknown-isc$UNAME_REL
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
- echo ${UNAME_MACHINE}-unknown-sco$UNAME_REL
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
else
- echo ${UNAME_MACHINE}-unknown-sysv32
+ echo ${UNAME_MACHINE}-pc-sysv32
fi
exit 0 ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+ exit 0 ;;
Intel:Mach:3*:*)
- echo i386-unknown-mach3
+ echo i386-pc-mach3
exit 0 ;;
paragon:*:*:*)
echo i860-intel-osf1
# "miniframe"
echo m68010-convergent-sysv
exit 0 ;;
- M680[234]0:*:R3V[567]*:*)
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit 0 ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit 0 ;;
+ M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0)
- uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3 && exit 0 ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- uname -p 2>/dev/null | grep 86 >/dev/null \
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& echo i486-ncr-sysv4 && exit 0 ;;
- m680[234]0:LynxOS:2.2*:*)
- echo m68k-lynx-lynxos${UNAME_RELEASE}
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit 0 ;;
- i[34]86:LynxOS:2.2*:*)
- echo i386-lynx-lynxos${UNAME_RELEASE}
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
- TSUNAMI:LynxOS:2.2*:*)
- echo sparc-lynx-lynxos${UNAME_RELEASE}
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
- rs6000:LynxOS:2.2*:*)
- echo rs6000-lynx-lynxos${UNAME_RELEASE}
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
exit 0 ;;
RM*:SINIX-*:*:*)
echo mips-sni-sysv4
echo ns32k-sni-sysv
fi
exit 0 ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit 0 ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit 0 ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit 0 ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit 0 ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit 0 ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit 0 ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Darwin:*:*)
+ case `uname -p` in
+ *86) UNAME_PROCESSOR=i686 ;;
+ powerpc) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit 0 ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit 0 ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit 0 ;;
+ NSR-[DGKLNPTVWY]:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit 0 ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit 0 ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit 0 ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit 0 ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit 0 ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit 0 ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit 0 ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit 0 ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit 0 ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit 0 ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-cat >dummy.c <<EOF
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
main ()
{
#if defined (sony)
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- printf ("%s-next-nextstep%s\n", __ARCHITECTURE__, version==2 ? "2" : "3");
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
exit (0);
#endif
#endif
#if defined (__386BSD__)
- printf ("i386-unknown-bsd\n"); exit (0);
+ printf ("i386-pc-bsd\n"); exit (0);
#endif
#if defined (sequent)
#endif
#if defined (_SEQUENT_)
- printf ("i386-sequent-ptx\n"); exit (0);
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
#endif
#if defined (vax)
-#if !defined (ultrix)
- printf ("vax-dec-bsd\n"); exit (0);
-#else
- printf ("vax-dec-ultrix\n"); exit (0);
-#endif
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
#endif
#if defined (alliant) && defined (i860)
}
EOF
-${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
-rm -f dummy.c dummy
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
# Apollos put the system type in the environment.
esac
fi
-#echo '(Unable to guess system type)' 1>&2
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ ftp://ftp.gnu.org/pub/gnu/config/
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
-/* config.h.in. Generated from configure.in by autoheader. */
-/* Special definitions, to process by autoheader.
- Copyright (C) 1997-9, 2000 Free Software Foundation. */
-
-/* Definitions for byte order, according to significance of bytes, from low
- addresses to high addresses. The value is what you get by putting '4'
- in the most significant byte, '3' in the second most significant byte,
- '2' in the second least significant byte, and '1' in the least
- significant byte. These definitions never need to be modified. */
-#define BIG 4321 /* 68k */
-#define LITTLE 1234 /* i[3456]86 */
-#define UNKNOWN 0000 /* Endianness must be determined at runtime. */
-
-/* Definitions for floating-point representation. */
-#define FPREP_IEEE754 754 /* The usual IEEE-754 format. */
-#define FPREP_UNKNOWN 666 /* Triggers an error at compile time. */
-
-/* We want prototypes for all the GNU extensions. */
-#define _GNU_SOURCE 1
-
-/* Name of the distribution. */
-#define PACKAGE "PSPP"
-
-/* Version of the distribution. */
-#undef VERSION
-
-/* The concatenation of the strings "GNU ", and PACKAGE. */
-#define GNU_PACKAGE "GNU PSPP"
-
-/* Define to 1 if ANSI function prototypes are usable. */
-#undef PROTOTYPES
-
-
-
-/* Define if sprintf() returns the number of characters written to
- the destination string, excluding the null terminator. */
-#undef HAVE_GOOD_SPRINTF
-
-/* Define if rand() and company work according to ANSI. */
-#undef HAVE_GOOD_RANDOM
+/* config.h.in. Generated from configure.ac by autoheader. */
-/* Define endianness of computer here as BIG or LITTLE, if known.
- If not known, define as UNKNOWN. */
-#define ENDIAN BIG
-
-/* Define as floating-point representation of this computer. For
- i386, m68k, and other common chips, this is FPREP_IEEE754. */
-#define FPREP FPREP_IEEE754
-
-/* Number of digits in longest `long' value, including sign. This is
- usually 11, for 32-bit `long's, or 19, for 64-bit `long's. */
-#define INT_DIGITS 19
-
-/* Define if you have the history library (-lhistory). */
-#undef HAVE_LIBHISTORY
-
-/* Define if you have the termcap library (-ltermcap). */
-#undef HAVE_LIBTERMCAP
-
-/* Stolen from Ulrich Drepper, <drepper@gnu.org> gettext-0.10,
- 1995. */
+/*
+ Define to one of `_getb67', `GETB67', `getb67' for
+ Cray-2 and Cray-YMP systems. This function is required
+ for `alloca.c' support on those systems. */
+#undef CRAY_STACKSEG_END
-/* Define if your locale.h file contains LC_MESSAGES. */
-#undef HAVE_LC_MESSAGES
+/*
+ Define to 1 if using `alloca.c'. */
+#undef C_ALLOCA
-/* Define to 1 if NLS is requested. */
+/*
+ Define to 1 if translation of program messages
+ to the user's native language is requested. */
#undef ENABLE_NLS
-/* Define as 1 if you have catgets and don't want to use GNU gettext. */
-#undef HAVE_CATGETS
-
-/* Define as 1 if you have gettext and don't want to use GNU gettext. */
-#undef HAVE_GETTEXT
-
-/* Define as 1 if you have the stpcpy function. */
-#undef HAVE_STPCPY
-
-
-/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
- systems. This function is required for `alloca.c' support on those systems.
- */
-#undef CRAY_STACKSEG_END
+/*
+ Define for machines that have IEEE 754 floating
+ point arithmetic, the most common format today. */
+#undef FPREP_IEEE754
-/* Define to 1 if using `alloca.c'. */
-#undef C_ALLOCA
-
-/* Define to 1 if you have `alloca', as a function or macro. */
+/*
+ Define to 1 if you have `alloca', as
+ a function or macro. */
#undef HAVE_ALLOCA
-/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
- */
+/*
+ Define to 1 if you have <alloca.h> and
+ it should be used (not on Ultrix). */
#undef HAVE_ALLOCA_H
-/* Define to 1 if you have the <argz.h> header file. */
+/*
+ Define to 1 if you have the <argz.h>
+ header file. */
#undef HAVE_ARGZ_H
-/* Define to 1 if you have the `dcgettext' function. */
+/*
+ Define if the GNU dcgettext() function is already
+ present or preinstalled. */
#undef HAVE_DCGETTEXT
-/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
+/*
+ Define to 1 if you don't have `vprintf'
+ but do have `_doprnt.' */
#undef HAVE_DOPRNT
-/* Define to 1 if you have the `feholdexcept' function. */
+/*
+ Define to 1 if you have the `feholdexcept'
+ function. */
#undef HAVE_FEHOLDEXCEPT
-/* Define to 1 if you have the <fenv.h> header file. */
+/*
+ Define to 1 if you have the <fenv.h>
+ header file. */
#undef HAVE_FENV_H
-/* Define to 1 if you have the `finite' function. */
+/*
+ Define to 1 if you have the `feof_unlocked'
+ function. */
+#undef HAVE_FEOF_UNLOCKED
+
+/*
+ Define to 1 if you have the `fgets_unlocked'
+ function. */
+#undef HAVE_FGETS_UNLOCKED
+
+/*
+ Define to 1 if you have the `finite'
+ function. */
#undef HAVE_FINITE
-/* Define to 1 if you have the <fpu_control.h> header file. */
+/*
+ Define to 1 if you have the <fpu_control.h>
+ header file. */
#undef HAVE_FPU_CONTROL_H
-/* Define to 1 if you have the `getcwd' function. */
+/*
+ Define to 1 if you have the `getcwd'
+ function. */
#undef HAVE_GETCWD
-/* Define to 1 if you have the `getdelim' function. */
+/*
+ Define to 1 if you have the `getc_unlocked'
+ function. */
+#undef HAVE_GETC_UNLOCKED
+
+/*
+ Define to 1 if you have the `getdelim'
+ function. */
#undef HAVE_GETDELIM
-/* Define to 1 if you have the `gethostname' function. */
+/*
+ Define to 1 if you have the `getegid'
+ function. */
+#undef HAVE_GETEGID
+
+/*
+ Define to 1 if you have the `geteuid'
+ function. */
+#undef HAVE_GETEUID
+
+/*
+ Define to 1 if you have the `getgid'
+ function. */
+#undef HAVE_GETGID
+
+/*
+ Define to 1 if you have the `gethostname'
+ function. */
#undef HAVE_GETHOSTNAME
-/* Define to 1 if you have the `getline' function. */
+/*
+ Define to 1 if you have the `getline'
+ function. */
#undef HAVE_GETLINE
-/* Define to 1 if you have the `getpagesize' function. */
+/*
+ Define to 1 if you have the `getpagesize'
+ function. */
#undef HAVE_GETPAGESIZE
-/* Define to 1 if you have the `getpid' function. */
+/*
+ Define to 1 if you have the `getpid'
+ function. */
#undef HAVE_GETPID
-/* Define to 1 if you have the <ieeefp.h> header file. */
+/*
+ Define if the GNU gettext() function is already
+ present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/*
+ Define to 1 if you have the `getuid'
+ function. */
+#undef HAVE_GETUID
+
+/*
+ Define if rand() and company work according to
+ ANSI. */
+#undef HAVE_GOOD_RANDOM
+
+/*
+ Define if sprintf() returns the number of characters
+ written to the destination string, excluding the null
+ terminator. */
+#undef HAVE_GOOD_SPRINTF
+
+/*
+ Define if you have the iconv() function. */
+#undef HAVE_ICONV
+
+/*
+ Define to 1 if you have the <ieeefp.h>
+ header file. */
#undef HAVE_IEEEFP_H
-/* Define to 1 if you have the <inttypes.h> header file. */
+/*
+ Define if <inttypes.h> exists and doesn't clash with
+ <sys/types.h>. */
#undef HAVE_INTTYPES_H
-/* Define to 1 if you have the `isinf' function. */
+/*
+ Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. */
+#undef HAVE_INTTYPES_H_WITH_UINTMAX
+
+/*
+ Define to 1 if you have the `isinf'
+ function. */
#undef HAVE_ISINF
-/* Define to 1 if you have the `isnan' function. */
+/*
+ Define to 1 if you have the `isnan'
+ function. */
#undef HAVE_ISNAN
-/* Define to 1 if you have the `i' library (-li). */
-#undef HAVE_LIBI
+/*
+ Define if you have <langinfo.h> and nl_langinfo(CODESET). */
+#undef HAVE_LANGINFO_CODESET
+
+/*
+ Define if your <locale.h> file defines LC_MESSAGES. */
+#undef HAVE_LC_MESSAGES
-/* Define to 1 if you have the `m' library (-lm). */
+/*
+ Define if you have the history library (-lhistory).
+ */
+#undef HAVE_LIBHISTORY
+
+/*
+ Define to 1 if you have the `m'
+ library (-lm). */
#undef HAVE_LIBM
-/* Define to 1 if you have the `readline' library (-lreadline). */
+/*
+ Define to 1 if you have the `readline'
+ library (-lreadline). */
#undef HAVE_LIBREADLINE
-/* Define to 1 if you have the <limits.h> header file. */
+/*
+ Define if you have the termcap library (-ltermcap).
+ */
+#undef HAVE_LIBTERMCAP
+
+/*
+ Define to 1 if you have the <limits.h>
+ header file. */
#undef HAVE_LIMITS_H
-/* Define to 1 if you have the <locale.h> header file. */
+/*
+ Define to 1 if you have the <locale.h>
+ header file. */
#undef HAVE_LOCALE_H
-/* Define to 1 if you have the <malloc.h> header file. */
+/*
+ Define to 1 if you have the <malloc.h>
+ header file. */
#undef HAVE_MALLOC_H
-/* Define to 1 if you have the `memchr' function. */
+/*
+ Define to 1 if you have the `memchr'
+ function. */
#undef HAVE_MEMCHR
-/* Define to 1 if you have the `memmem' function. */
+/*
+ Define to 1 if you have the `memmem'
+ function. */
#undef HAVE_MEMMEM
-/* Define to 1 if you have the `memmove' function. */
+/*
+ Define to 1 if you have the `memmove'
+ function. */
#undef HAVE_MEMMOVE
-/* Define to 1 if you have the <memory.h> header file. */
+/*
+ Define to 1 if you have the <memory.h>
+ header file. */
#undef HAVE_MEMORY_H
-/* Define to 1 if you have the `memset' function. */
+/*
+ Define to 1 if you have the `mempcpy'
+ function. */
+#undef HAVE_MEMPCPY
+
+/*
+ Define to 1 if you have the `memset'
+ function. */
#undef HAVE_MEMSET
-/* Define to 1 if you have a working `mmap' system call. */
+/*
+ Define to 1 if you have a working
+ `mmap' system call. */
#undef HAVE_MMAP
-/* Define to 1 if you have the `munmap' function. */
+/*
+ Define to 1 if you have the `munmap'
+ function. */
#undef HAVE_MUNMAP
-/* Define to 1 if you have the <nl_types.h> header file. */
+/*
+ Define to 1 if you have the <nl_types.h>
+ header file. */
#undef HAVE_NL_TYPES_H
-/* Define to 1 if you have the `putenv' function. */
+/*
+ Define to 1 if you have the `putenv'
+ function. */
#undef HAVE_PUTENV
-/* Define to 1 if you have the <readline/history.h> header file. */
+/*
+ Define to 1 if you have the <readline/history.h>
+ header file. */
#undef HAVE_READLINE_HISTORY_H
-/* Define to 1 if you have the <readline/readline.h> header file. */
+/*
+ Define to 1 if you have the <readline/readline.h>
+ header file. */
#undef HAVE_READLINE_READLINE_H
-/* Define to 1 if you have the `setenv' function. */
+/*
+ Define to 1 if you have the `setenv'
+ function. */
#undef HAVE_SETENV
-/* Define to 1 if you have the `setlocale' function. */
+/*
+ Define to 1 if you have the `setlocale'
+ function. */
#undef HAVE_SETLOCALE
-/* Define to 1 if you have the <stdint.h> header file. */
+/*
+ Define to 1 if you have the <stddef.h>
+ header file. */
+#undef HAVE_STDDEF_H
+
+/*
+ Define to 1 if you have the <stdint.h>
+ header file. */
#undef HAVE_STDINT_H
-/* Define to 1 if you have the <stdlib.h> header file. */
+/*
+ Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. */
+#undef HAVE_STDINT_H_WITH_UINTMAX
+
+/*
+ Define to 1 if you have the <stdlib.h>
+ header file. */
#undef HAVE_STDLIB_H
-/* Define to 1 if you have the `stpcpy' function. */
+/*
+ Define to 1 if you have the `stpcpy'
+ function. */
#undef HAVE_STPCPY
-/* Define to 1 if you have the `strcasecmp' function. */
+/*
+ Define to 1 if you have the `strcasecmp'
+ function. */
#undef HAVE_STRCASECMP
-/* Define to 1 if you have the `strchr' function. */
-#undef HAVE_STRCHR
+/*
+ Define to 1 if you have the `strdup'
+ function. */
+#undef HAVE_STRDUP
-/* Define to 1 if you have the `strerror' function. */
+/*
+ Define to 1 if you have the `strerror'
+ function. */
#undef HAVE_STRERROR
-/* Define to 1 if you have the <strings.h> header file. */
+/*
+ Define to 1 if you have the <strings.h>
+ header file. */
#undef HAVE_STRINGS_H
-/* Define to 1 if you have the <string.h> header file. */
+/*
+ Define to 1 if you have the <string.h>
+ header file. */
#undef HAVE_STRING_H
-/* Define to 1 if you have the `strncasecmp' function. */
+/*
+ Define to 1 if you have the `strncasecmp'
+ function. */
#undef HAVE_STRNCASECMP
-/* Define to 1 if you have the `strpbrk' function. */
+/*
+ Define to 1 if you have the `strpbrk'
+ function. */
#undef HAVE_STRPBRK
-/* Define to 1 if you have the `strstr' function. */
+/*
+ Define to 1 if you have the `strstr'
+ function. */
#undef HAVE_STRSTR
-/* Define to 1 if you have the `strtod' function. */
+/*
+ Define to 1 if you have the `strtod'
+ function. */
#undef HAVE_STRTOD
-/* Define to 1 if you have the `strtok_r' function. */
+/*
+ Define to 1 if you have the `strtok_r'
+ function. */
#undef HAVE_STRTOK_R
-/* Define to 1 if you have the `strtol' function. */
+/*
+ Define to 1 if you have the `strtol'
+ function. */
#undef HAVE_STRTOL
-/* Define to 1 if you have the `strtoul' function. */
+/*
+ Define to 1 if you have the `strtoul'
+ function. */
#undef HAVE_STRTOUL
-/* Define to 1 if you have the <sys/mman.h> header file. */
+/*
+ Define to 1 if you have the <sys/mman.h>
+ header file. */
#undef HAVE_SYS_MMAN_H
-/* Define to 1 if you have the <sys/stat.h> header file. */
+/*
+ Define to 1 if you have the <sys/param.h>
+ header file. */
+#undef HAVE_SYS_PARAM_H
+
+/*
+ Define to 1 if you have the <sys/stat.h>
+ header file. */
#undef HAVE_SYS_STAT_H
-/* Define to 1 if you have the <sys/time.h> header file. */
+/*
+ Define to 1 if you have the <sys/time.h>
+ header file. */
#undef HAVE_SYS_TIME_H
-/* Define to 1 if you have the <sys/types.h> header file. */
+/*
+ Define to 1 if you have the <sys/types.h>
+ header file. */
#undef HAVE_SYS_TYPES_H
-/* Define to 1 if you have the <sys/wait.h> header file. */
+/*
+ Define to 1 if you have the <sys/wait.h>
+ header file. */
#undef HAVE_SYS_WAIT_H
-/* Define to 1 if you have the <termcap.h> header file. */
+/*
+ Define to 1 if you have the <termcap.h>
+ header file. */
#undef HAVE_TERMCAP_H
-/* Define to 1 if you have the <unistd.h> header file. */
+/*
+ Define to 1 if you have the `tsearch'
+ function. */
+#undef HAVE_TSEARCH
+
+/*
+ Define if you have the 'uintmax_t' type in
+ <stdint.h> or <inttypes.h>. */
+#undef HAVE_UINTMAX_T
+
+/*
+ Define to 1 if you have the <unistd.h>
+ header file. */
#undef HAVE_UNISTD_H
-/* Define to 1 if you have the <values.h> header file. */
-#undef HAVE_VALUES_H
+/*
+ Define if you have the unsigned long long
+ type. */
+#undef HAVE_UNSIGNED_LONG_LONG
-/* Define to 1 if you have the `vprintf' function. */
+/*
+ Define to 1 if you have the `vprintf'
+ function. */
#undef HAVE_VPRINTF
-/* Define to 1 if you have the `__argz_count' function. */
+/*
+ Define to 1 if you have the `__argz_count'
+ function. */
#undef HAVE___ARGZ_COUNT
-/* Define to 1 if you have the `__argz_next' function. */
+/*
+ Define to 1 if you have the `__argz_next'
+ function. */
#undef HAVE___ARGZ_NEXT
-/* Define to 1 if you have the `__argz_stringify' function. */
+/*
+ Define to 1 if you have the `__argz_stringify'
+ function. */
#undef HAVE___ARGZ_STRINGIFY
-/* Define to 1 if you have the `__setfpucw' function. */
+/*
+ Define to 1 if you have the `__fsetlocking'
+ function. */
+#undef HAVE___FSETLOCKING
+
+/*
+ Define to 1 if you have the `__setfpucw'
+ function. */
#undef HAVE___SETFPUCW
-/* Name of package */
+/*
+ Define as const if the declaration of iconv()
+ needs const. */
+#undef ICONV_CONST
+
+/*
+ Define if integer division by zero raises signal
+ SIGFPE. */
+#undef INTDIV0_RAISES_SIGFPE
+
+/*
+ Number of digits in longest `long' value, including
+ sign. This is usually 11, for 32-bit `long's, or
+ 19, for 64-bit `long's. */
+#undef INT_DIGITS
+
+/*
+ Name of package */
#undef PACKAGE
-/* Define to the address where bug reports for this package should be sent. */
+/*
+ Define to the address where bug reports for
+ this package should be sent. */
#undef PACKAGE_BUGREPORT
-/* Define to the full name of this package. */
+/*
+ Define to the full name of this package.
+ */
#undef PACKAGE_NAME
-/* Define to the full name and version of this package. */
+/*
+ Define to the full name and version of
+ this package. */
#undef PACKAGE_STRING
-/* Define to the one symbol short name of this package. */
+/*
+ Define to the one symbol short name of
+ this package. */
#undef PACKAGE_TARNAME
-/* Define to the version of this package. */
+/*
+ Define to the version of this package. */
#undef PACKAGE_VERSION
-/* Define if compiler has function prototypes */
-#undef PROTOTYPES
+/*
+ Define if <inttypes.h> exists and defines unusable PRI*
+ macros. */
+#undef PRI_MACROS_BROKEN
-/* The size of a `double', as computed by sizeof. */
+/*
+ The size of a `double', as computed by
+ sizeof. */
#undef SIZEOF_DOUBLE
-/* The size of a `float', as computed by sizeof. */
+/*
+ The size of a `float', as computed by
+ sizeof. */
#undef SIZEOF_FLOAT
-/* The size of a `int', as computed by sizeof. */
+/*
+ The size of a `int', as computed by
+ sizeof. */
#undef SIZEOF_INT
-/* The size of a `long', as computed by sizeof. */
+/*
+ The size of a `long', as computed by
+ sizeof. */
#undef SIZEOF_LONG
-/* The size of a `long double', as computed by sizeof. */
+/*
+ The size of a `long double', as computed
+ by sizeof. */
#undef SIZEOF_LONG_DOUBLE
-/* The size of a `long long', as computed by sizeof. */
+/*
+ The size of a `long long', as computed
+ by sizeof. */
#undef SIZEOF_LONG_LONG
-/* The size of a `short', as computed by sizeof. */
+/*
+ The size of a `short', as computed by
+ sizeof. */
#undef SIZEOF_SHORT
/* If using the C implementation of alloca, define if you know the
direction of stack growth for your system; otherwise it will be
automatically deduced at run-time.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown */
+ STACK_DIRECTION > 0 => grows toward higher addresses
+ STACK_DIRECTION < 0 => grows toward lower addresses
+ STACK_DIRECTION = 0 => direction of growth unknown */
#undef STACK_DIRECTION
-/* Define to 1 if the `S_IS*' macros in <sys/stat.h> do not work properly. */
+/*
+ Define to 1 if the `S_IS*' macros in
+ <sys/stat.h> do not work properly. */
#undef STAT_MACROS_BROKEN
-/* Define to 1 if you have the ANSI C header files. */
+/*
+ Define to 1 if you have the ANSI
+ C header files. */
#undef STDC_HEADERS
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
+/*
+ Define to 1 if you can safely include
+ both <sys/time.h> and <time.h>. */
#undef TIME_WITH_SYS_TIME
-/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+/*
+ Define to 1 if your <sys/time.h> declares `struct
+ tm'. */
#undef TM_IN_SYS_TIME
-/* Version number of package */
+/*
+ Version number of package */
#undef VERSION
-/* Define to empty if `const' does not conform to ANSI C. */
+/*
+ Define to 1 if your processor stores words
+ with the most significant byte first (like Motorola and
+ SPARC, unlike Intel and VAX). */
+#undef WORDS_BIGENDIAN
+
+/* Enable GNU extensions on systems that have them. */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+
+/*
+ Define to empty if `const' does not conform
+ to ANSI C. */
#undef const
-/* Define as `__inline' if that's what the C compiler calls it, or to nothing
- if it is not supported. */
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
#undef inline
+#endif
-/* Define to `long' if <sys/types.h> does not define. */
+/*
+ Define to `long' if <sys/types.h> does not define.
+ */
#undef off_t
-/* Define to `unsigned' if <sys/types.h> does not define. */
+/*
+ Define to `unsigned' if <sys/types.h> does not define.
+ */
#undef size_t
-#include <pref.h>
+/*
+ Define to unsigned long or unsigned long long
+ if <stdint.h> and <inttypes.h> don't define. */
+#undef uintmax_t
-/* Local Variables: */
-/* mode:c */
-/* End: */
+#include <pref.h>
--- /dev/null
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2003 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ mingw* | pw32* | os2*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ newsos6)
+ ;;
+ linux*)
+ case $CC in
+ icc|ecc)
+ wl='-Wl,'
+ ;;
+ ccc)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ case "$host_os" in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = yes; then
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ bsdi4*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
+ hardcode_direct=no
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10* | hpux11*)
+ if test "$with_gnu_ld" = no; then
+ case "$host_cpu" in
+ hppa*64*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=no
+ ;;
+ ia64*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=no
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4.2uw2*)
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ ;;
+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+ ;;
+ sysv5*)
+ hardcode_libdir_flag_spec=
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ ;;
+ aix4* | aix5*)
+ ;;
+ amigaos*)
+ ;;
+ beos*)
+ ;;
+ bsdi4*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ shrext=.dll
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ ;;
+ dgux*)
+ ;;
+ freebsd1*)
+ ;;
+ freebsd*)
+ ;;
+ gnu*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case "$host_cpu" in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux*)
+ ;;
+ netbsd*)
+ ;;
+ newsos6)
+ ;;
+ nto-qnx)
+ ;;
+ openbsd*)
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ ;;
+ osf3* | osf4* | osf5*)
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ ;;
+ sunos4*)
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ ;;
+ sysv4*MP*)
+ ;;
+ uts4*)
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
#! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-# Copyright (C) 1991, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+timestamp='2003-10-07'
+
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
+# can handle that machine. It does not imply ALL GNU software can.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# The goal of this file is to map all the various variations of a given
# machine specification into a single specification in the form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
-if [ x$1 = x ]
-then
- echo Configuration name missing. 1>&2
- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
- echo "or $0 ALIAS" 1>&2
- echo where ALIAS is a recognized configuration type. 1>&2
- exit 1
-fi
+me=`echo "$0" | sed -e 's,.*/,,'`
-# First pass through any local machine types.
-case $1 in
- *local*)
- echo $1
- exit 0
- ;;
- *)
- ;;
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --version | -v )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit 0;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
esac
-# Separate what the user gave into CPU-COMPANY and OS (if any).
-basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-if [ $basic_machine != $1 ]
-then os=`echo $1 | sed 's/.*-/-/'`
-else os=; fi
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-dietlibc | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
### Let's recognize common machines as not being operating systems so
### that things like config.sub decstation-3100 work. We also
-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp )
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis)
os=
basic_machine=$1
;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
-hiux*)
os=-hiuxwe2
;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
-sco4)
os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2.[4-9]*)
os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2v[4-9]*)
# Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-sco*)
os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-isc)
os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-clix*)
basic_machine=clipper-intergraph
;;
-isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-unknown/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
;;
-lynx*)
os=-lynxos
-windowsnt*)
os=`echo $os | sed -e 's/windowsnt/winnt/'`
;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
esac
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
# Recognize the basic CPU types without company name.
# Some are omitted here because they have special meanings below.
- tahoe | i[3456]86 | i860 | m68k | m68000 | m88k | ns32k | arm \
- | arme[lb] | pyramid \
- | tron | a29k | 580 | i960 | h8300 | hppa1.0 | hppa1.1 \
- | alpha | we32k | ns16k | clipper | sparclite | i370 | sh \
- | powerpc | powerpcle | sparc64 | 1750a | dsp16xx | mips64 | mipsel \
- | pdp11 | mips64el | mips64orion | mips64orionel \
- | sparc)
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | m32r | m68000 | m68k | m88k | mcore \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64vr | mips64vrel \
+ | mips64orion | mips64orionel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | msp430 \
+ | ns16k | ns32k \
+ | openrisc | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+ | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
+ | v850 | v850e \
+ | we32k \
+ | x86 | xscale | xstormy16 | xtensa \
+ | z8k)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12)
+ # Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
+ os=-none
;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
# Object if more than one company name word.
*-*-*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
;;
# Recognize the basic CPU types with company name.
- vax-* | tahoe-* | i[3456]86-* | i860-* | m68k-* | m68000-* | m88k-* \
- | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \
- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \
- | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \
- | hppa1.0-* | hppa1.1-* | alpha-* | we32k-* | cydra-* | ns16k-* \
- | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \
- | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \
- | mips64el-* | mips64orion-* | mips64orionel-*)
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* \
+ | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | m32r-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | mcore-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | msp430-* \
+ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* \
+ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tron-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
+ | xtensa-* \
+ | ymp-* \
+ | z8k-*)
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
basic_machine=m68000-att
;;
3b*)
basic_machine=we32k-att
;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
alliant | fx80)
basic_machine=fx80-alliant
;;
basic_machine=a29k-none
os=-bsd
;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
amdahl)
basic_machine=580-amdahl
os=-sysv
;;
amiga | amiga-*)
- basic_machine=m68k-cbm
+ basic_machine=m68k-unknown
;;
- amigados)
- basic_machine=m68k-cbm
- os=-amigados
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
;;
amigaunix | amix)
- basic_machine=m68k-cbm
+ basic_machine=m68k-unknown
os=-sysv4
;;
apollo68)
basic_machine=m68k-apollo
os=-sysv
;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
balance)
basic_machine=ns32k-sequent
os=-dynix
;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
convex-c1)
basic_machine=c1-convex
os=-bsd
basic_machine=c38-convex
os=-bsd
;;
- cray | ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- cray2)
- basic_machine=cray2-cray
+ cray | j90)
+ basic_machine=j90-cray
os=-unicos
;;
crds | unos)
basic_machine=m68k-crds
;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
da30 | da30-*)
basic_machine=m68k-da30
;;
decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
basic_machine=mips-dec
;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
delta | 3300 | motorola-3300 | motorola-delta \
| 3300-motorola | delta-motorola)
basic_machine=m68k-motorola
encore | umax | mmax)
basic_machine=ns32k-encore
;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
fx2800)
basic_machine=i860-alliant
;;
basic_machine=tron-gmicro
os=-sysv
;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
h3050r* | hiux*)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
basic_machine=h8300-hitachi
os=-hms
;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
harris)
basic_machine=m88k-harris
os=-sysv3
basic_machine=m68k-hp
os=-hpux
;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
hp9k2[0-9][0-9] | hp9k31[0-9])
basic_machine=m68000-hp
;;
hp9k3[2-9][0-9])
basic_machine=m68k-hp
;;
- hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
basic_machine=hppa1.1-hp
;;
hp9k8[0-9][0-9] | hp8[0-9][0-9])
basic_machine=hppa1.0-hp
;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
i370-ibm* | ibm*)
basic_machine=i370-ibm
- os=-mvs
;;
# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i[3456]86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
- i[3456]86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
- i[3456]86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
- i[3456]86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-unknown/'`
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
iris | iris4d)
basic_machine=mips-sgi
case $os in
basic_machine=ns32k-utek
os=-sysv
;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
miniframe)
basic_machine=m68000-convergent
;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
mips3*-*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
;;
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
+ mmix*)
+ basic_machine=mmix-knuth
+ os=-mmixware
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
news | news700 | news800 | news900)
basic_machine=m68k-sony
os=-newsos
basic_machine=mips-sony
os=-newsos
;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
next | m*-next )
basic_machine=m68k-next
case $os in
basic_machine=i960-intel
os=-nindy
;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
np1)
basic_machine=np1-gould
;;
+ nv1)
+ basic_machine=nv1-cray
+ os=-unicosmp
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ or32 | or32-*)
+ basic_machine=or32-unknown
+ os=-coff
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
pa-hitachi)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
pbb)
basic_machine=m68k-tti
;;
- pc532 | pc532-*)
+ pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
- pentium | p5 | p6)
- # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium
- basic_machine=i586-intel
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
;;
- pentium-* | p5-* | p6-*)
- # We don't have specific support for the Intel Pentium (p6) followon yet, so just call it a Pentium
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- k5)
- # We don't have specific support for AMD's K5 yet, so just call it a Pentium
- basic_machine=i586-amd
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- nexen)
- # We don't have specific support for Nexgen yet, so just call it a Pentium
- basic_machine=i586-nexgen
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
;;
- power) basic_machine=rs6000-ibm
+ power) basic_machine=power-ibm
;;
ppc) basic_machine=powerpc-unknown
- ;;
+ ;;
ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
ppcle | powerpclittle | ppc-le | powerpc-little)
basic_machine=powerpcle-unknown
- ;;
+ ;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
ps2)
basic_machine=i386-ibm
;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
rm[46]00)
basic_machine=mips-siemens
;;
rtpc | rtpc-*)
basic_machine=romp-ibm
;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
sequent)
basic_machine=i386-sequent
;;
basic_machine=sh-hitachi
os=-hms
;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
sps7)
basic_machine=m68k-bull
os=-sysv2
spur)
basic_machine=spur-unknown
;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
sun2)
basic_machine=m68000-sun
;;
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
symmetry)
basic_machine=i386-sequent
os=-dynix
;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
+ tic55x | c55x*)
+ basic_machine=tic55x-unknown
+ os=-coff
+ ;;
+ tic6x | c6x*)
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
tower | tower-32)
basic_machine=m68k-ncr
;;
basic_machine=a29k-nyu
os=-sym1
;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
vaxv)
basic_machine=vax-dec
os=-sysv
basic_machine=vax-dec
os=-vms
;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
vxworks960)
basic_machine=i960-wrs
os=-vxworks
basic_machine=a29k-wrs
os=-vxworks
;;
- xmp)
- basic_machine=xmp-cray
- os=-unicos
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
;;
- xps | xps100)
+ xps | xps100)
basic_machine=xps100-honeywell
;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
none)
basic_machine=none-none
os=-none
# Here we handle the default manufacturer of certain CPU types. It is in
# some cases the only manufacturer, in others, it is the most popular.
- mips)
- basic_machine=mips-mips
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
;;
romp)
basic_machine=romp-ibm
vax)
basic_machine=vax-dec
;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
pdp11)
basic_machine=pdp11-dec
;;
we32k)
basic_machine=we32k-att
;;
- sparc)
+ sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparc | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
- cydra)
+ cydra)
basic_machine=cydra-cydrome
;;
orion)
orion105)
basic_machine=clipper-highlevel
;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
if [ x"$os" != x"" ]
then
case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
# -solaris* is a basic system type, with this one exception.
-solaris1 | -solaris1.*)
os=`echo $os | sed -e 's|solaris1|sunos4|'`
-solaris)
os=-solaris2
;;
- -unixware* | svr4*)
+ -svr4*)
os=-sysv4
;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
-gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux|'`
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
;;
# First accept the basic system types.
# The portable systems comes first.
# Each alternative MUST END IN A *, to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[345]* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigados* | -msdos* | -newsos* | -unicos* | -aos* \
- | -nindy* | -vxworks* | -ebmon* | -hms* | -mvs* | -clix* \
- | -riscos* | -linux* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* )
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
-sunos5*)
os=`echo $os | sed -e 's|sunos5|solaris2|'`
;;
-sunos6*)
os=`echo $os | sed -e 's|sunos6|solaris3|'`
;;
+ -opened*)
+ os=-openedition
+ ;;
+ -wince*)
+ os=-wince
+ ;;
-osfrose*)
os=-osfrose
;;
-acis*)
os=-aos
;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
-ctix* | -uts*)
os=-sysv
;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
# Preserve the version number of sinix5.
-sinix5.*)
os=`echo $os | sed -e 's|sinix|sysv|'`
# This must come after -sysvr4.
-sysv*)
;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
-xenix)
os=-xenix
;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
-none)
;;
*)
*-acorn)
os=-riscix1.2
;;
+ arm*-rebel)
+ os=-linux
+ ;;
arm*-semi)
os=-aout
;;
- pdp11-*)
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
os=-none
;;
*-dec | vax-*)
# default.
# os=-sunos4
;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
*-tti) # must be before sparc entry or we get the wrong os.
os=-sysv3
;;
sparc-* | *-sun)
os=-sunos4.1.1
;;
+ *-be)
+ os=-beos
+ ;;
*-ibm)
os=-aix
;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
*-hp)
os=-hpux
;;
os=-sysv
;;
*-cbm)
- os=-amigados
+ os=-amigaos
;;
*-dg)
os=-dgux
m88k-omron*)
os=-luna
;;
+ *-next )
+ os=-nextstep
+ ;;
*-sequent)
os=-ptx
;;
*-next)
os=-nextstep3
;;
- *-gould)
+ *-gould)
os=-sysv
;;
- *-highlevel)
+ *-highlevel)
os=-bsd
;;
*-encore)
os=-bsd
;;
- *-sgi)
+ *-sgi)
os=-irix
;;
- *-siemens)
+ *-siemens)
os=-sysv4
;;
*-masscomp)
os=-rtu
;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
*)
os=-none
;;
-sunos*)
vendor=sun
;;
- -lynxos*)
- vendor=lynx
- ;;
-aix*)
vendor=ibm
;;
+ -beos*)
+ vendor=be
+ ;;
-hpux*)
vendor=hp
;;
+ -mpeix*)
+ vendor=hp
+ ;;
-hiux*)
vendor=hitachi
;;
-genix*)
vendor=ns
;;
- -mvs*)
+ -mvs* | -opened*)
vendor=ibm
;;
-ptx*)
vendor=sequent
;;
- -vxworks*)
+ -vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
+@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_LIBS = @GMP_LIBS@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
-LOCAL_CC = @LOCAL_CC@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
pkgsysconfdir = $(sysconfdir)/$(PACKAGE)
pkgsysconf_DATA = devices html-prologue papersize ps-prologue
EXTRA_DIST = devices html-prologue papersize ps-prologue
MAINTAINERCLEANFILES = Makefile.in
+subdir = config
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES =
-DATA = $(pkgsysconf_DATA)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(pkgsysconf_DATA)
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in ChangeLog Makefile.am
+all: all-am
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps config/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu config/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
+pkgsysconfDATA_INSTALL = $(INSTALL_DATA)
install-pkgsysconfDATA: $(pkgsysconf_DATA)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(pkgsysconfdir)
@list='$(pkgsysconf_DATA)'; for p in $$list; do \
- if test -f $(srcdir)/$$p; then \
- echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgsysconfdir)/$$p"; \
- $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgsysconfdir)/$$p; \
- else if test -f $$p; then \
- echo " $(INSTALL_DATA) $$p $(DESTDIR)$(pkgsysconfdir)/$$p"; \
- $(INSTALL_DATA) $$p $(DESTDIR)$(pkgsysconfdir)/$$p; \
- fi; fi; \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " $(pkgsysconfDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgsysconfdir)/$$f"; \
+ $(pkgsysconfDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgsysconfdir)/$$f; \
done
uninstall-pkgsysconfDATA:
@$(NORMAL_UNINSTALL)
- list='$(pkgsysconf_DATA)'; for p in $$list; do \
- rm -f $(DESTDIR)$(pkgsysconfdir)/$$p; \
+ @list='$(pkgsysconf_DATA)'; for p in $$list; do \
+ f="`echo $$p | sed -e 's|^.*/||'`"; \
+ echo " rm -f $(DESTDIR)$(pkgsysconfdir)/$$f"; \
+ rm -f $(DESTDIR)$(pkgsysconfdir)/$$f; \
done
tags: TAGS
TAGS:
+ctags: CTAGS
+CTAGS:
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-subdir = config
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(DATA)
-install-data-am: install-pkgsysconfDATA
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(pkgsysconfdir)
+install: install-am
+install-exec: install-exec-am
install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-pkgsysconfDATA
-uninstall: uninstall-am
-all-am: Makefile $(DATA)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(pkgsysconfdir)
-
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-generic
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-generic mostlyclean-am
-clean-am: clean-generic mostlyclean-am
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
-clean: clean-am
+dvi: dvi-am
+
+dvi-am:
-distclean-am: distclean-generic clean-am
+info: info-am
-distclean: distclean-am
+info-am:
-maintainer-clean-am: maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+install-data-am: install-pkgsysconfDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
-.PHONY: uninstall-pkgsysconfDATA install-pkgsysconfDATA tags distdir \
-info-am info dvi-am dvi check check-am installcheck-am installcheck \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-pkgsysconfDATA
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am info info-am install \
+ install-am install-data install-data-am install-exec \
+ install-exec-am install-info install-info-am install-man \
+ install-pkgsysconfDATA install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+ pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
+ uninstall-pkgsysconfDATA
# A `private installation' in my terms is just having the appropriate
private-uninstall:
-cd $$HOME/.pspp; rm -f $(pkgsysconf_DATA)
-rmdir $$HOME/.pspp
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
#! /bin/sh
-
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.13
-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+# Generated by GNU Autoconf 2.58 for pspp 0.3.1.
#
+# Copyright (C) 2003 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-# Defaults:
-ac_help=
+exec 6>&1
+
+#
+# Initializations.
+#
ac_default_prefix=/usr/local
-# Any additions from configure.in:
-ac_help="$ac_help
- --disable-nls do not use Native Language Support"
-ac_help="$ac_help
- --with-included-gettext use the GNU gettext library included here"
-ac_help="$ac_help
- --with-catgets use catgets functions if available"
-ac_help="$ac_help
- --with-checker compile with Checker (for debugging)"
-ac_help="$ac_help
- --enable-debugging turn on debugging options"
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='pspp'
+PACKAGE_TARNAME='pspp'
+PACKAGE_VERSION='0.3.1'
+PACKAGE_STRING='pspp 0.3.1'
+PACKAGE_BUGREPORT=''
+
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+# include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE MKINSTALLDIRS USE_NLS MSGFMT GMSGFMT XGETTEXT MSGMERGE build build_cpu build_vendor build_os host host_cpu host_vendor host_os RANLIB ac_ct_RANLIB CPP EGREP ALLOCA GLIBC21 LIBICONV LTLIBICONV INTLBISON BUILD_INCLUDED_LIBINTL USE_INCLUDED_LIBINTL CATOBJEXT DATADIRNAME INSTOBJEXT GENCAT INTLOBJS INTL_LIBTOOL_SUFFIX_PREFIX INTLLIBS LIBINTL LTLIBINTL POSUB LIBOBJS LN_S LTLIBOBJS'
+ac_subst_files=''
# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
-build=NONE
-cache_file=./config.cache
+cache_file=/dev/null
exec_prefix=NONE
-host=NONE
no_create=
-nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
silent=
site=
srcdir=
-target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
infodir='${prefix}/info'
mandir='${prefix}/man'
-# Initialize some other variables.
-subdirs=
-MFLAGS= MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-# Maximum number of lines to put in a shell here document.
-ac_max_here_lines=12
-
ac_prev=
for ac_option
do
-
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
continue
fi
- case "$ac_option" in
- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
- *) ac_optarg= ;;
- esac
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
# Accept the important Cygnus configure options, so we can diagnose typos.
- case "$ac_option" in
+ case $ac_option in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir="$ac_optarg" ;;
+ bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
- ac_prev=build ;;
+ ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build="$ac_optarg" ;;
+ build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file="$ac_optarg" ;;
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
- datadir="$ac_optarg" ;;
+ datadir=$ac_optarg ;;
-disable-* | --disable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- eval "enable_${ac_feature}=no" ;;
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
-enable-* | --enable-*)
- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
- fi
- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
- eval "enable_${ac_feature}='$ac_optarg'" ;;
+ eval "enable_$ac_feature='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
- exec_prefix="$ac_optarg" ;;
+ exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
- -help | --help | --hel | --he)
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat << EOF
-Usage: configure [options] [host]
-Options: [defaults in brackets after descriptions]
-Configuration:
- --cache-file=FILE cache test results in FILE
- --help print this message
- --no-create do not create output files
- --quiet, --silent do not print \`checking...' messages
- --version print the version of autoconf that created configure
-Directory and file names:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [same as prefix]
- --bindir=DIR user executables in DIR [EPREFIX/bin]
- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data in DIR
- [PREFIX/share]
- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data in DIR
- [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
- --includedir=DIR C header files in DIR [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
- --infodir=DIR info documentation in DIR [PREFIX/info]
- --mandir=DIR man documentation in DIR [PREFIX/man]
- --srcdir=DIR find the sources in DIR [configure dir or ..]
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM
- run sed PROGRAM on installed program names
-EOF
- cat << EOF
-Host type:
- --build=BUILD configure for building on BUILD [BUILD=HOST]
- --host=HOST configure for HOST [guessed]
- --target=TARGET configure for TARGET [TARGET=HOST]
-Features and packages:
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --x-includes=DIR X include files are in DIR
- --x-libraries=DIR X library files are in DIR
-EOF
- if test -n "$ac_help"; then
- echo "--enable and --with options recognized:$ac_help"
- fi
- exit 0 ;;
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
-host | --host | --hos | --ho)
- ac_prev=host ;;
+ ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
- host="$ac_optarg" ;;
+ host_alias=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir="$ac_optarg" ;;
+ includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir="$ac_optarg" ;;
+ infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir="$ac_optarg" ;;
+ libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
- libexecdir="$ac_optarg" ;;
+ libexecdir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir="$ac_optarg" ;;
+ localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir="$ac_optarg" ;;
+ mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c)
+ | --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir="$ac_optarg" ;;
+ oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix="$ac_optarg" ;;
+ prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix="$ac_optarg" ;;
+ program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix="$ac_optarg" ;;
+ program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name="$ac_optarg" ;;
+ program_transform_name=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
- sbindir="$ac_optarg" ;;
+ sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
- sharedstatedir="$ac_optarg" ;;
+ sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
- site="$ac_optarg" ;;
+ site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir="$ac_optarg" ;;
+ srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir="$ac_optarg" ;;
+ sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target ;;
+ ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target="$ac_optarg" ;;
+ target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
- -version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.13"
- exit 0 ;;
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
-with-* | --with-*)
- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
ac_package=`echo $ac_package| sed 's/-/_/g'`
- case "$ac_option" in
- *=*) ;;
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
*) ac_optarg=yes ;;
esac
- eval "with_${ac_package}='$ac_optarg'" ;;
+ eval "with_$ac_package='$ac_optarg'" ;;
-without-* | --without-*)
- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
- fi
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- eval "with_${ac_package}=no" ;;
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
--x)
# Obsolete; use --with-x.
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes="$ac_optarg" ;;
+ x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries="$ac_optarg" ;;
+ x_libraries=$ac_optarg ;;
- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
;;
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
*)
- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
- echo "configure: warning: $ac_option: invalid host type" 1>&2
- fi
- if test "x$nonopt" != xNONE; then
- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
- fi
- nonopt="$ac_option"
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
esac
done
if test -n "$ac_prev"; then
- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
-fi
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-# File descriptor usage:
-# 0 standard input
-# 1 file creation
-# 2 errors and warnings
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 6 checking for... messages and results
-# 5 compiler messages saved in config.log
-if test "$silent" = yes; then
- exec 6>/dev/null
-else
- exec 6>&1
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
fi
-exec 5>./config.log
-echo "\
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-" 1>&5
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Also quote any args containing shell metacharacters.
-ac_configure_args=
-for ac_arg
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
do
- case "$ac_arg" in
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c) ;;
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
esac
done
-# NLS nuisances.
-# Only set these to C if already set. These must not be set unconditionally
-# because not all systems understand e.g. LANG=C (notably SCO).
-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
-# Non-C LC_CTYPE values break the ctype check.
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo > confdefs.h
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
-# A filename unique to this package, relative to the directory that
-# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=src/q2c.c
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
- ac_prog=$0
- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
fi
fi
-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures pspp 0.3.1 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of pspp 0.3.1:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-dependency-tracking Speeds up one-time builds
+ --enable-dependency-tracking Do not reject slow dependency extractors
+ --disable-nls do not use Native Language Support
+ --disable-rpath do not hardcode runtime library paths
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
+ --without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-included-gettext use the GNU gettext library included here
+ --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
+ --without-libintl-prefix don't search for libintl in includedir and libdir
+
+Some influential environment variables:
+ CC
+ C compiler command
+ CFLAGS
+ C compiler flags
+ LDFLAGS
+ linker flags, e.g. -L<lib dir> if you have
+ libraries in a nonstandard directory <lib dir>
+ CPPFLAGS
+ C/C++ preprocessor flags, e.g. -I<include dir> if you
+ have headers in a nonstandard directory <include dir>
+ CPP
+ C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd "$ac_popdir"
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+pspp configure 0.3.1
+generated by GNU Autoconf 2.58
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by pspp $as_me 0.3.1, which was
+generated by GNU Autoconf 2.58. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
- echo "loading site script $ac_site_file"
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
- echo "loading cache $cache_file"
- . $cache_file
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
else
- echo "creating cache $cache_file"
- > $cache_file
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
fi
ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-ac_exeext=
-ac_objext=o
-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
- ac_n= ac_c='
-' ac_t=' '
- else
- ac_n=-n ac_c= ac_t=
- fi
-else
- ac_n= ac_c='\c' ac_t=
-fi
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE=1"
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:543: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:573: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_headers="$ac_config_headers config.h"
+
+am__api_version="1.7"
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
fi
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
- if test -z "$CC"; then
- case "`uname -s`" in
- *win32* | *WIN32*)
- # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:624: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="cl"
- break
- fi
- done
- IFS="$ac_save_ifs"
-fi
-fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_t""no" 1>&6
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+
+
fi
- ;;
- esac
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:656: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 667 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:672: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
- fi
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
+ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
-fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:698: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:703: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:712: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
else
- ac_cv_prog_gcc=no
-fi
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
else
- GCC=
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:731: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ cat >conftest.make <<\_ACEOF
+all:
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
else
- ac_cv_prog_cc_g=no
+ eval ac_cv_prog_make_${ac_make}_set=no
fi
-rm -f conftest*
-
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
fi
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
+ am__leading_dot=_
fi
+rmdir .tst 2>/dev/null
-echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:763: checking for POSIXized ISC" >&5
-if test -d /etc/conf/kconfig.d &&
- grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
-then
- echo "$ac_t""yes" 1>&6
- ISC=yes # If later tests want to check for ISC.
- cat >> confdefs.h <<\EOF
-#define _POSIX_SOURCE 1
-EOF
+ # test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+fi
- if test "$GCC" = yes; then
- CC="$CC -posix"
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
else
- CC="$CC -Xp"
+ CYGPATH_W=echo
fi
-else
- echo "$ac_t""no" 1>&6
- ISC=
fi
-# Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:786: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+# Define the identity of the package.
+ PACKAGE='pspp'
+ VERSION='0.3.1'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="gcc"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:816: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_prog_rejected=no
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- break
- fi
- done
- IFS="$ac_save_ifs"
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# -gt 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- set dummy "$ac_dir/$ac_word" "$@"
- shift
- ac_cv_prog_CC="$@"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
fi
fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-CC="$ac_cv_prog_CC"
-if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+
+ STRIP=$ac_ct_STRIP
else
- echo "$ac_t""no" 1>&6
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+
+
- if test -z "$CC"; then
- case "`uname -s`" in
- *win32* | *WIN32*)
- # Extract the first word of "cl", so it can be a program name with args.
-set dummy cl; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:867: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+
+cat >>confdefs.h <<\_ACEOF
+#define _GNU_SOURCE 1
+_ACEOF
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_CC="cl"
- break
- fi
- done
- IFS="$ac_save_ifs"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-CC="$ac_cv_prog_CC"
+CC=$ac_cv_prog_CC
if test -n "$CC"; then
- echo "$ac_t""$CC" 1>&6
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
- ;;
- esac
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:899: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-
-cat > conftest.$ac_ext << EOF
-
-#line 910 "configure"
-#include "confdefs.h"
-
-main(){return(0);}
-EOF
-if { (eval echo configure:915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- ac_cv_prog_cc_works=yes
- # If we can't run a trivial program, we are probably using a cross compiler.
- if (./conftest; exit) 2>/dev/null; then
- ac_cv_prog_cc_cross=no
- else
- ac_cv_prog_cc_cross=yes
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- ac_cv_prog_cc_works=no
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-rm -fr conftest*
-ac_ext=c
-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
-cross_compiling=$ac_cv_prog_cc_cross
-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
-if test $ac_cv_prog_cc_works = no; then
- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:941: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
-cross_compiling=$ac_cv_prog_cc_cross
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:946: checking whether we are using GNU C" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
else
- cat > conftest.c <<EOF
-#ifdef __GNUC__
- yes;
-#endif
-EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
- ac_cv_prog_gcc=yes
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
else
- ac_cv_prog_gcc=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
-if test $ac_cv_prog_gcc = yes; then
- GCC=yes
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
else
- GCC=
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-ac_test_CFLAGS="${CFLAGS+set}"
-ac_save_CFLAGS="$CFLAGS"
-CFLAGS=
-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:974: checking whether ${CC-cc} accepts -g" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ test -n "$ac_ct_CC" && break
+done
+
+ CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
else
- echo 'void f(){}' > conftest.c
-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_cc_g=yes
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
else
- ac_cv_prog_cc_g=no
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
fi
-rm -f conftest*
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
if test "$ac_test_CFLAGS" = set; then
- CFLAGS="$ac_save_CFLAGS"
+ CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
CFLAGS=
fi
fi
-
-
-
-
-echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6
-echo "configure:1009: checking for ${CC-cc} option to accept ANSI C" >&5
-if eval "test \"`echo '$''{'am_cv_prog_cc_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- am_cv_prog_cc_stdc=no
-ac_save_CC="$CC"
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- cat > conftest.$ac_ext <<EOF
-#line 1025 "configure"
-#include "confdefs.h"
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
#include <sys/types.h>
va_end (v);
return s;
}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std1 is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std1. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
-int main() {
+fi
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-; return 0; }
-EOF
-if { (eval echo configure:1062: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- am_cv_prog_cc_stdc="$ac_arg"; break
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
-CC="$ac_save_CC"
-
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
fi
-if test -z "$am_cv_prog_cc_stdc"; then
- echo "$ac_t""none needed" 1>&6
else
- echo "$ac_t""$am_cv_prog_cc_stdc" 1>&6
-fi
-case "x$am_cv_prog_cc_stdc" in
- x|xno) ;;
- *) CC="$CC $am_cv_prog_cc_stdc" ;;
-esac
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-# configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-# same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-# as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval="$enable_dependency_tracking"
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
fi
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1132: checking host system type" >&5
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
+if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1153: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
- case $nonopt in
- NONE) target_alias=$host_alias ;;
- *) target_alias=$nonopt ;;
- esac ;;
-esac
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1171: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-test "$host_alias" != "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
+depcc="$CC" am_compiler_list=
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1205: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
- done
- ;;
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ : > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored.
+ if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
done
- IFS="$ac_save_IFS"
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
+
fi
-echo "$ac_t""$INSTALL" 1>&6
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:1258: checking whether build environment is sane" >&5
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
- fi
- if test "$*" != "X $srcdir/configure conftestfile" \
- && test "$*" != "X conftestfile $srcdir/configure"; then
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" 1>&2; exit 1; }
- fi
- test "$2" = conftestfile
- )
-then
- # Ok.
- :
-else
- { echo "configure: error: newly created file is older than distributed files!
-Check your system clock" 1>&2; exit 1; }
-fi
-rm -f conftest*
-echo "$ac_t""yes" 1>&6
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
-else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
-fi
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ case "$ac_aux_dir" in
+ /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;;
+ *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;;
+ esac
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1315: checking whether ${MAKE-make} sets \${MAKE}" >&5
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftestmake <<\EOF
-all:
- @echo 'ac_maketemp="${MAKE}"'
-EOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftestmake
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- SET_MAKE=
-else
- echo "$ac_t""no" 1>&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-PACKAGE=pspp
+ echo "$as_me:$LINENO: checking whether NLS is requested" >&5
+echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6
+ # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+ enableval="$enable_nls"
+ USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi;
+ echo "$as_me:$LINENO: result: $USE_NLS" >&5
+echo "${ECHO_T}$USE_NLS" >&6
-VERSION=0.3.0
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
-fi
-cat >> confdefs.h <<EOF
-#define PACKAGE "$PACKAGE"
-EOF
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
-missing_dir=`cd $ac_aux_dir && pwd`
-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1361: checking for working aclocal" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
- ACLOCAL=aclocal
- echo "$ac_t""found" 1>&6
-else
- ACLOCAL="$missing_dir/missing aclocal"
- echo "$ac_t""missing" 1>&6
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1374: checking for working autoconf" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
- AUTOCONF=autoconf
- echo "$ac_t""found" 1>&6
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
else
- AUTOCONF="$missing_dir/missing autoconf"
- echo "$ac_t""missing" 1>&6
+ ac_executable_p="test -f"
fi
+rm -f conf$$.file
-echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1387: checking for working automake" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (automake --version) < /dev/null > /dev/null 2>&1; then
- AUTOMAKE=automake
- echo "$ac_t""found" 1>&6
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_MSGFMT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case "$MSGFMT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ if $ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+ echo "$as_me:$LINENO: result: $MSGFMT" >&5
+echo "${ECHO_T}$MSGFMT" >&6
else
- AUTOMAKE="$missing_dir/missing automake"
- echo "$ac_t""missing" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1400: checking for working autoheader" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
- AUTOHEADER=autoheader
- echo "$ac_t""found" 1>&6
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_GMSGFMT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- AUTOHEADER="$missing_dir/missing autoheader"
- echo "$ac_t""missing" 1>&6
+ case $GMSGFMT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
fi
+GMSGFMT=$ac_cv_path_GMSGFMT
-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1413: checking for working makeinfo" >&5
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
- MAKEINFO=makeinfo
- echo "$ac_t""found" 1>&6
+if test -n "$GMSGFMT"; then
+ echo "$as_me:$LINENO: result: $GMSGFMT" >&5
+echo "${ECHO_T}$GMSGFMT" >&6
else
- MAKEINFO="$missing_dir/missing makeinfo"
- echo "$ac_t""missing" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-#AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
-cat >> confdefs.h <<EOF
-#define VERSION "$VERSION"
-EOF
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_XGETTEXT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case "$XGETTEXT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+ echo "$as_me:$LINENO: result: $XGETTEXT" >&5
+echo "${ECHO_T}$XGETTEXT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ rm -f messages.po
-#GNU_PACKAGE="GNU $PACKAGE"
-#AC_DEFINE_UNQUOTED(GNU_PACKAGE, "$GNU_PACKAGE")
-ALL_LINGUAS=""
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
-if test "$program_transform_name" = s,x,x,; then
- program_transform_name=
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
else
- # Double any \ or $. echo might interpret backslashes.
- cat <<\EOF_SED > conftestsed
-s,\\,\\\\,g; s,\$,$$,g
-EOF_SED
- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
- rm -f conftestsed
+ ac_executable_p="test -f"
fi
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,${program_prefix},; $program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
-
-# sed with no file args requires a program.
-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+rm -f conf$$.file
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# ./install, which can be erroneously created by make from ./install.sh.
-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1469: checking for a BSD compatible install" >&5
-if test -z "$INSTALL"; then
-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_MSGMERGE+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
- for ac_dir in $PATH; do
- # Account for people who put trailing slashes in PATH elements.
- case "$ac_dir/" in
- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- if test -f $ac_dir/$ac_prog; then
- if test $ac_prog = install &&
- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- else
- ac_cv_path_install="$ac_dir/$ac_prog -c"
- break 2
- fi
- fi
+ case "$MSGMERGE" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ if $ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1; then
+ ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
done
- ;;
- esac
- done
- IFS="$ac_save_IFS"
-
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+ ;;
+esac
fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL="$ac_cv_path_install"
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL="$ac_install_sh"
- fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+ echo "$as_me:$LINENO: result: $MSGMERGE" >&5
+echo "${ECHO_T}$MSGMERGE" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo "$ac_t""$INSTALL" 1>&6
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+ if test "$GMSGFMT" != ":"; then
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
+ (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
+ echo "$as_me:$LINENO: result: found $GMSGFMT program is not GNU msgfmt; ignore it" >&5
+echo "${ECHO_T}found $GMSGFMT program is not GNU msgfmt; ignore it" >&6
+ GMSGFMT=":"
+ fi
+ fi
+
+ if test "$XGETTEXT" != ":"; then
+ if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 &&
+ (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5
+echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6
+ XGETTEXT=":"
+ fi
+ rm -f messages.po
+ fi
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+ ac_config_commands="$ac_config_commands default-1"
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1524: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
fi
fi
-RANLIB="$ac_cv_prog_RANLIB"
+RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1553: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
- cat > conftest.$ac_ext <<EOF
-#line 1568 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1574: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 1585 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1591: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP="${CC-cc} -nologo -E"
- cat > conftest.$ac_ext <<EOF
-#line 1602 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1608: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CPP=/lib/cpp
-fi
-rm -f conftest*
-fi
-rm -f conftest*
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
fi
- CPP="$ac_cv_prog_CPP"
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
else
- ac_cv_prog_CPP="$CPP"
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-echo "$ac_t""$CPP" 1>&6
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1633: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1638 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1646: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- ac_cv_header_stdc=yes
+ RANLIB=$ac_ct_RANLIB
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_stdc=no
+ RANLIB="$ac_cv_prog_RANLIB"
fi
-rm -f conftest*
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 1663 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
- :
-else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-fi
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 1681 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
- :
+ echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5
+echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6
+if test "${ac_cv_lib_cposix_strerror+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcposix $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char strerror ();
+int
+main ()
+{
+strerror ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_cposix_strerror=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_cposix_strerror=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5
+echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6
+if test $ac_cv_lib_cposix_strerror = yes; then
+ LIBS="$LIBS -lcposix"
+fi
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
:
else
- cat > conftest.$ac_ext <<EOF
-#line 1702 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-EOF
-if { (eval echo configure:1713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
:
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
ac_cv_header_stdc=no
fi
-rm -fr conftest*
+rm -f conftest*
+
fi
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
fi
+rm -f conftest*
+
fi
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
#define STDC_HEADERS 1
-EOF
-
-fi
-
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1737: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1742 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x = {0,0};
-/* SunOS 4.1.1 cc rejects this. */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this. */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in an arm
- of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:1791: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+if test "${ac_cv_c_const+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset x;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *ccp;
+ char **p;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ ccp = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++ccp;
+ p = (char**) ccp;
+ ccp = (char const *const *) p;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ }
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_c_const=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_const=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_const=no
fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-
-echo "$ac_t""$ac_cv_c_const" 1>&6
+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6
if test $ac_cv_c_const = no; then
- cat >> confdefs.h <<\EOF
-#define const
-EOF
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
fi
-echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1812: checking for inline" >&5
-if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for inline" >&5
+echo $ECHO_N "checking for inline... $ECHO_C" >&6
+if test "${ac_cv_c_inline+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
- cat > conftest.$ac_ext <<EOF
-#line 1819 "configure"
-#include "confdefs.h"
-
-int main() {
-} $ac_kw foo() {
-; return 0; }
-EOF
-if { (eval echo configure:1826: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_c_inline=$ac_kw; break
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
fi
+echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+echo "${ECHO_T}$ac_cv_c_inline" >&6
-echo "$ac_t""$ac_cv_c_inline" 1>&6
-case "$ac_cv_c_inline" in
+
+case $ac_cv_c_inline in
inline | yes) ;;
- no) cat >> confdefs.h <<\EOF
-#define inline
-EOF
- ;;
- *) cat >> confdefs.h <<EOF
-#define inline $ac_cv_c_inline
-EOF
- ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+ ;;
esac
-echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:1852: checking for off_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+echo "$as_me:$LINENO: checking for off_t" >&5
+echo $ECHO_N "checking for off_t... $ECHO_C" >&6
+if test "${ac_cv_type_off_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1857 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
- rm -rf conftest*
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((off_t *) 0)
+ return 0;
+if (sizeof (off_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_type_off_t=yes
else
- rm -rf conftest*
- ac_cv_type_off_t=no
-fi
-rm -f conftest*
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_cv_type_off_t=no
fi
-echo "$ac_t""$ac_cv_type_off_t" 1>&6
-if test $ac_cv_type_off_t = no; then
- cat >> confdefs.h <<\EOF
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_off_t" >&5
+echo "${ECHO_T}$ac_cv_type_off_t" >&6
+if test $ac_cv_type_off_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
#define off_t long
-EOF
+_ACEOF
fi
-echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1885: checking for size_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for size_t" >&5
+echo $ECHO_N "checking for size_t... $ECHO_C" >&6
+if test "${ac_cv_type_size_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1890 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
- rm -rf conftest*
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((size_t *) 0)
+ return 0;
+if (sizeof (size_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_type_size_t=yes
else
- rm -rf conftest*
- ac_cv_type_size_t=no
-fi
-rm -f conftest*
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_cv_type_size_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-echo "$ac_t""$ac_cv_type_size_t" 1>&6
-if test $ac_cv_type_size_t = no; then
- cat >> confdefs.h <<\EOF
+echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+echo "${ECHO_T}$ac_cv_type_size_t" >&6
+if test $ac_cv_type_size_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
#define size_t unsigned
-EOF
+_ACEOF
fi
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
-echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:1920: checking for working alloca.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 1925 "configure"
-#include "confdefs.h"
+echo "$as_me:$LINENO: checking for working alloca.h" >&5
+echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6
+if test "${ac_cv_working_alloca_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <alloca.h>
-int main() {
-char *p = alloca(2 * sizeof(int));
-; return 0; }
-EOF
-if { (eval echo configure:1932: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_header_alloca_h=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_alloca_h=no
-fi
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
-if test $ac_cv_header_alloca_h = yes; then
- cat >> confdefs.h <<\EOF
+int
+main ()
+{
+char *p = (char *) alloca (2 * sizeof (int));
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_working_alloca_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_working_alloca_h=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5
+echo "${ECHO_T}$ac_cv_working_alloca_h" >&6
+if test $ac_cv_working_alloca_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
#define HAVE_ALLOCA_H 1
-EOF
+_ACEOF
fi
-echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:1953: checking for alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for alloca" >&5
+echo $ECHO_N "checking for alloca... $ECHO_C" >&6
+if test "${ac_cv_func_alloca_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1958 "configure"
-#include "confdefs.h"
-
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#ifdef __GNUC__
# define alloca __builtin_alloca
#else
# endif
#endif
-int main() {
-char *p = (char *) alloca(1);
-; return 0; }
-EOF
-if { (eval echo configure:1986: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
+int
+main ()
+{
+char *p = (char *) alloca (1);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_func_alloca_works=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_func_alloca_works=no
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_alloca_works=no
fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
fi
+echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5
+echo "${ECHO_T}$ac_cv_func_alloca_works" >&6
-echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
if test $ac_cv_func_alloca_works = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA 1
-EOF
-fi
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_ALLOCA 1
+_ACEOF
-if test $ac_cv_func_alloca_works = no; then
+else
# The SVR3 libPW and SVR4 libucb both contain incompatible functions
- # that cause trouble. Some versions do not even contain alloca or
- # contain a buggy version. If you still want to use their alloca,
- # use ar to extract alloca.o from them instead of compiling alloca.c.
- ALLOCA=alloca.${ac_objext}
- cat >> confdefs.h <<\EOF
+# that cause trouble. Some versions do not even contain alloca or
+# contain a buggy version. If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
+
+ALLOCA=alloca.$ac_objext
+
+cat >>confdefs.h <<\_ACEOF
#define C_ALLOCA 1
-EOF
+_ACEOF
-echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2018: checking whether alloca needs Cray hooks" >&5
-if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5
+echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6
+if test "${ac_cv_os_cray+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftest.$ac_ext <<EOF
-#line 2023 "configure"
-#include "confdefs.h"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#if defined(CRAY) && ! defined(CRAY2)
webecray
#else
wenotbecray
#endif
-EOF
+_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "webecray" >/dev/null 2>&1; then
- rm -rf conftest*
+ $EGREP "webecray" >/dev/null 2>&1; then
ac_cv_os_cray=yes
else
- rm -rf conftest*
ac_cv_os_cray=no
fi
rm -f conftest*
fi
-
-echo "$ac_t""$ac_cv_os_cray" 1>&6
+echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5
+echo "${ECHO_T}$ac_cv_os_cray" >&6
if test $ac_cv_os_cray = yes; then
-for ac_func in _getb67 GETB67 getb67; do
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2048: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2053 "configure"
-#include "confdefs.h"
+ for ac_func in _getb67 GETB67 getb67; do
+ as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
-int main() {
+#undef $ac_func
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-$ac_func();
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
#endif
-; return 0; }
-EOF
-if { (eval echo configure:2076: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<EOF
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+
+cat >>confdefs.h <<_ACEOF
#define CRAY_STACKSEG_END $ac_func
-EOF
+_ACEOF
- break
-else
- echo "$ac_t""no" 1>&6
+ break
fi
-done
+ done
fi
-echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2103: checking stack direction for C alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking stack direction for C alloca" >&5
+echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6
+if test "${ac_cv_c_stack_direction+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
- cat > conftest.$ac_ext <<EOF
-#line 2111 "configure"
-#include "confdefs.h"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+int
find_stack_direction ()
{
static char *addr = 0;
else
return (&dummy > addr) ? 1 : -1;
}
+
+int
main ()
{
- exit (find_stack_direction() < 0);
+ exit (find_stack_direction () < 0);
}
-EOF
-if { (eval echo configure:2130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_c_stack_direction=1
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_c_stack_direction=-1
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_c_stack_direction=-1
fi
-rm -fr conftest*
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
fi
+echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5
+echo "${ECHO_T}$ac_cv_c_stack_direction" >&6
-echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
-cat >> confdefs.h <<EOF
+cat >>confdefs.h <<_ACEOF
#define STACK_DIRECTION $ac_cv_c_stack_direction
-EOF
+_ACEOF
+
fi
-for ac_hdr in unistd.h
+
+
+for ac_header in stdlib.h unistd.h
do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2155: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2160 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
fi
-rm -f conftest*
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to the pspp lists. ##
+## ------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_t""no" 1>&6
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
done
+
for ac_func in getpagesize
do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2194: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2199 "configure"
-#include "confdefs.h"
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
-int main() {
+#undef $ac_func
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
-$ac_func();
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
#endif
-; return 0; }
-EOF
-if { (eval echo configure:2222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
fi
done
-echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2247: checking for working mmap" >&5
-if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for working mmap" >&5
+echo $ECHO_N "checking for working mmap... $ECHO_C" >&6
+if test "${ac_cv_func_mmap_fixed_mapped+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
ac_cv_func_mmap_fixed_mapped=no
else
- cat > conftest.$ac_ext <<EOF
-#line 2255 "configure"
-#include "confdefs.h"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+/* malloc might have been renamed as rpl_malloc. */
+#undef malloc
/* Thanks to Mike Haertel and Jim Avera for this test.
Here is a matrix of mmap possibilities:
back from the file, nor mmap's back from the file at a different
address. (There have been systems where private was not correctly
implemented like the infamous i386 svr4.0, and systems where the
- VM page cache was not coherent with the filesystem buffer cache
+ VM page cache was not coherent with the file system buffer cache
like early versions of FreeBSD and possibly contemporary NetBSD.)
For shared mappings, we should conversely verify that changes get
- propogated back to all the places they're supposed to be.
+ propagated back to all the places they're supposed to be.
Grep wants private fixed already mapped.
The main things grep needs to know about mmap are:
* does it exist and is it safe to write into the mmap'd area
* how to use it (BSD variants) */
-#include <sys/types.h>
+
#include <fcntl.h>
#include <sys/mman.h>
-/* This mess was copied from the GNU getpagesize.h. */
-#ifndef HAVE_GETPAGESIZE
-# ifdef HAVE_UNISTD_H
-# include <unistd.h>
-# endif
+#if !STDC_HEADERS && !HAVE_STDLIB_H
+char *malloc ();
+#endif
+/* This mess was copied from the GNU getpagesize.h. */
+#if !HAVE_GETPAGESIZE
/* Assume that all systems that can run configure have sys/param.h. */
-# ifndef HAVE_SYS_PARAM_H
+# if !HAVE_SYS_PARAM_H
# define HAVE_SYS_PARAM_H 1
# endif
# ifdef _SC_PAGESIZE
# define getpagesize() sysconf(_SC_PAGESIZE)
# else /* no _SC_PAGESIZE */
-# ifdef HAVE_SYS_PARAM_H
+# if HAVE_SYS_PARAM_H
# include <sys/param.h>
# ifdef EXEC_PAGESIZE
# define getpagesize() EXEC_PAGESIZE
#endif /* no HAVE_GETPAGESIZE */
-#ifdef __cplusplus
-extern "C" { void *malloc(unsigned); }
-#else
-char *malloc();
-#endif
-
int
-main()
-{
- char *data, *data2, *data3;
- int i, pagesize;
- int fd;
-
- pagesize = getpagesize();
-
- /*
- * First, make a file with some known garbage in it.
- */
- data = malloc(pagesize);
- if (!data)
- exit(1);
- for (i = 0; i < pagesize; ++i)
- *(data + i) = rand();
- umask(0);
- fd = creat("conftestmmap", 0600);
- if (fd < 0)
- exit(1);
- if (write(fd, data, pagesize) != pagesize)
- exit(1);
- close(fd);
-
- /*
- * Next, try to mmap the file at a fixed address which
- * already has something else allocated at it. If we can,
- * also make sure that we see the same garbage.
- */
- fd = open("conftestmmap", O_RDWR);
- if (fd < 0)
- exit(1);
- data2 = malloc(2 * pagesize);
- if (!data2)
- exit(1);
- data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1);
- if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE,
- MAP_PRIVATE | MAP_FIXED, fd, 0L))
- exit(1);
- for (i = 0; i < pagesize; ++i)
- if (*(data + i) != *(data2 + i))
- exit(1);
-
- /*
- * Finally, make sure that changes to the mapped area
- * do not percolate back to the file as seen by read().
- * (This is a bug on some variants of i386 svr4.0.)
- */
- for (i = 0; i < pagesize; ++i)
- *(data2 + i) = *(data2 + i) + 1;
- data3 = malloc(pagesize);
- if (!data3)
- exit(1);
- if (read(fd, data3, pagesize) != pagesize)
- exit(1);
- for (i = 0; i < pagesize; ++i)
- if (*(data + i) != *(data3 + i))
- exit(1);
- close(fd);
- unlink("conftestmmap");
- exit(0);
-}
-
-EOF
-if { (eval echo configure:2395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
+main ()
+{
+ char *data, *data2, *data3;
+ int i, pagesize;
+ int fd;
+
+ pagesize = getpagesize ();
+
+ /* First, make a file with some known garbage in it. */
+ data = (char *) malloc (pagesize);
+ if (!data)
+ exit (1);
+ for (i = 0; i < pagesize; ++i)
+ *(data + i) = rand ();
+ umask (0);
+ fd = creat ("conftest.mmap", 0600);
+ if (fd < 0)
+ exit (1);
+ if (write (fd, data, pagesize) != pagesize)
+ exit (1);
+ close (fd);
+
+ /* Next, try to mmap the file at a fixed address which already has
+ something else allocated at it. If we can, also make sure that
+ we see the same garbage. */
+ fd = open ("conftest.mmap", O_RDWR);
+ if (fd < 0)
+ exit (1);
+ data2 = (char *) malloc (2 * pagesize);
+ if (!data2)
+ exit (1);
+ data2 += (pagesize - ((long) data2 & (pagesize - 1))) & (pagesize - 1);
+ if (data2 != mmap (data2, pagesize, PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_FIXED, fd, 0L))
+ exit (1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data2 + i))
+ exit (1);
+
+ /* Finally, make sure that changes to the mapped area do not
+ percolate back to the file as seen by read(). (This is a bug on
+ some variants of i386 svr4.0.) */
+ for (i = 0; i < pagesize; ++i)
+ *(data2 + i) = *(data2 + i) + 1;
+ data3 = (char *) malloc (pagesize);
+ if (!data3)
+ exit (1);
+ if (read (fd, data3, pagesize) != pagesize)
+ exit (1);
+ for (i = 0; i < pagesize; ++i)
+ if (*(data + i) != *(data3 + i))
+ exit (1);
+ close (fd);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
ac_cv_func_mmap_fixed_mapped=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_func_mmap_fixed_mapped=no
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_mmap_fixed_mapped=no
fi
-rm -fr conftest*
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
fi
-
-echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6
+echo "$as_me:$LINENO: result: $ac_cv_func_mmap_fixed_mapped" >&5
+echo "${ECHO_T}$ac_cv_func_mmap_fixed_mapped" >&6
if test $ac_cv_func_mmap_fixed_mapped = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_MMAP 1
-EOF
-fi
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_MMAP 1
+_ACEOF
-
- for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h values.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2423: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2428 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2433: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
fi
-done
+rm -f conftest.mmap
- for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2463: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2468 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-int main() {
+ echo "$as_me:$LINENO: checking whether we are using the GNU C Library 2.1 or newer" >&5
+echo $ECHO_N "checking whether we are using the GNU C Library 2.1 or newer... $ECHO_C" >&6
+if test "${ac_cv_gnu_library_2_1+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+ Lucky GNU user
+ #endif
#endif
-; return 0; }
-EOF
-if { (eval echo configure:2491: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "Lucky GNU user" >/dev/null 2>&1; then
+ ac_cv_gnu_library_2_1=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ ac_cv_gnu_library_2_1=no
fi
rm -f conftest*
+
+
+
fi
+echo "$as_me:$LINENO: result: $ac_cv_gnu_library_2_1" >&5
+echo "${ECHO_T}$ac_cv_gnu_library_2_1" >&6
+
+ GLIBC21="$ac_cv_gnu_library_2_1"
+
+
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
+
+ echo "$as_me:$LINENO: checking whether integer division by zero raises SIGFPE" >&5
+echo $ECHO_N "checking whether integer division by zero raises SIGFPE... $ECHO_C" >&6
+if test "${gt_cv_int_divbyzero_sigfpe+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_t""no" 1>&6
-fi
-done
+ if test "$cross_compiling" = yes; then
- if test "${ac_cv_func_stpcpy+set}" != "set"; then
- for ac_func in stpcpy
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2520: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2525 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
+ # Guess based on the CPU.
+ case "$host_cpu" in
+ alpha* | i3456786 | m68k | s390*)
+ gt_cv_int_divbyzero_sigfpe="guessing yes";;
+ *)
+ gt_cv_int_divbyzero_sigfpe="guessing no";;
+ esac
-int main() {
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
+#include <stdlib.h>
+#include <signal.h>
+
+static void
+#ifdef __cplusplus
+sigfpe_handler (int sig)
#else
-$ac_func();
+sigfpe_handler (sig) int sig;
+#endif
+{
+ /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */
+ exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int nan;
+
+int main ()
+{
+ signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+ signal (SIGTRAP, sigfpe_handler);
#endif
+/* Linux/SPARC yields signal SIGILL. */
+#if defined (__sparc__) && defined (__linux__)
+ signal (SIGILL, sigfpe_handler);
+#endif
+
+ z = x / y;
+ nan = y / y;
+ exit (1);
+}
-; return 0; }
-EOF
-if { (eval echo configure:2548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_int_divbyzero_sigfpe=yes
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+gt_cv_int_divbyzero_sigfpe=no
fi
-rm -f conftest*
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
fi
-done
+echo "$as_me:$LINENO: result: $gt_cv_int_divbyzero_sigfpe" >&5
+echo "${ECHO_T}$gt_cv_int_divbyzero_sigfpe" >&6
+ case "$gt_cv_int_divbyzero_sigfpe" in
+ *yes) value=1;;
+ *) value=0;;
+ esac
- fi
- if test "${ac_cv_func_stpcpy}" = "yes"; then
- cat >> confdefs.h <<\EOF
-#define HAVE_STPCPY 1
-EOF
+cat >>confdefs.h <<_ACEOF
+#define INTDIV0_RAISES_SIGFPE $value
+_ACEOF
- fi
- if test $ac_cv_header_locale_h = yes; then
- echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:2582: checking for LC_MESSAGES" >&5
-if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2587 "configure"
-#include "confdefs.h"
-#include <locale.h>
-int main() {
-return LC_MESSAGES
-; return 0; }
-EOF
-if { (eval echo configure:2594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- am_cv_val_LC_MESSAGES=yes
+
+ echo "$as_me:$LINENO: checking for inttypes.h" >&5
+echo $ECHO_N "checking for inttypes.h... $ECHO_C" >&6
+if test "${jm_ac_cv_header_inttypes_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- am_cv_val_LC_MESSAGES=no
-fi
-rm -f conftest*
-fi
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <inttypes.h>
+int
+main ()
+{
+uintmax_t i = (uintmax_t) -1;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ jm_ac_cv_header_inttypes_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+jm_ac_cv_header_inttypes_h=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $jm_ac_cv_header_inttypes_h" >&5
+echo "${ECHO_T}$jm_ac_cv_header_inttypes_h" >&6
+ if test $jm_ac_cv_header_inttypes_h = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_INTTYPES_H_WITH_UINTMAX 1
+_ACEOF
-echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6
- if test $am_cv_val_LC_MESSAGES = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_LC_MESSAGES 1
-EOF
+ fi
+
+
+ echo "$as_me:$LINENO: checking for stdint.h" >&5
+echo $ECHO_N "checking for stdint.h... $ECHO_C" >&6
+if test "${jm_ac_cv_header_stdint_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <stdint.h>
+int
+main ()
+{
+uintmax_t i = (uintmax_t) -1;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ jm_ac_cv_header_stdint_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+jm_ac_cv_header_stdint_h=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $jm_ac_cv_header_stdint_h" >&5
+echo "${ECHO_T}$jm_ac_cv_header_stdint_h" >&6
+ if test $jm_ac_cv_header_stdint_h = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_STDINT_H_WITH_UINTMAX 1
+_ACEOF
- fi
fi
- echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:2615: checking whether NLS is requested" >&5
- # Check whether --enable-nls or --disable-nls was given.
-if test "${enable_nls+set}" = set; then
- enableval="$enable_nls"
- USE_NLS=$enableval
+
+
+ echo "$as_me:$LINENO: checking for unsigned long long" >&5
+echo $ECHO_N "checking for unsigned long long... $ECHO_C" >&6
+if test "${ac_cv_type_unsigned_long_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- USE_NLS=yes
-fi
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+unsigned long long ull = 1; int i = 63;
+int
+main ()
+{
+unsigned long long ullmax = (unsigned long long) -1;
+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_unsigned_long_long=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_unsigned_long_long=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_long_long" >&5
+echo "${ECHO_T}$ac_cv_type_unsigned_long_long" >&6
+ if test $ac_cv_type_unsigned_long_long = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_UNSIGNED_LONG_LONG 1
+_ACEOF
- echo "$ac_t""$USE_NLS" 1>&6
-
+ fi
- USE_INCLUDED_LIBINTL=no
- if test "$USE_NLS" = "yes"; then
- cat >> confdefs.h <<\EOF
-#define ENABLE_NLS 1
-EOF
- echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:2635: checking whether included gettext is requested" >&5
- # Check whether --with-included-gettext or --without-included-gettext was given.
-if test "${with_included_gettext+set}" = set; then
- withval="$with_included_gettext"
- nls_cv_force_use_gnu_gettext=$withval
-else
- nls_cv_force_use_gnu_gettext=no
-fi
- echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6
+ if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- nls_cv_header_intl=
- nls_cv_header_libgt=
- CATOBJEXT=NONE
-
- ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:2654: checking for libintl.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2659 "configure"
-#include "confdefs.h"
-#include <libintl.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2664: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:2681: checking for gettext in libc" >&5
-if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2686 "configure"
-#include "confdefs.h"
-#include <libintl.h>
-int main() {
-return (int) gettext ("")
-; return 0; }
-EOF
-if { (eval echo configure:2693: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- gt_cv_func_gettext_libc=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- gt_cv_func_gettext_libc=no
-fi
-rm -f conftest*
-fi
+ test $ac_cv_type_unsigned_long_long = yes \
+ && ac_type='unsigned long long' \
+ || ac_type='unsigned long'
-echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
+cat >>confdefs.h <<_ACEOF
+#define uintmax_t $ac_type
+_ACEOF
- if test "$gt_cv_func_gettext_libc" != "yes"; then
- echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:2709: checking for bindtextdomain in -lintl" >&5
-ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lintl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2717 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char bindtextdomain();
-
-int main() {
-bindtextdomain()
-; return 0; }
-EOF
-if { (eval echo configure:2728: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+ else
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:2744: checking for gettext in libintl" >&5
-if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2749 "configure"
-#include "confdefs.h"
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_UINTMAX_T 1
+_ACEOF
-int main() {
-return (int) gettext ("")
-; return 0; }
-EOF
-if { (eval echo configure:2756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- gt_cv_func_gettext_libintl=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- gt_cv_func_gettext_libintl=no
-fi
-rm -f conftest*
-fi
+ fi
-echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6
+
+ echo "$as_me:$LINENO: checking for inttypes.h" >&5
+echo $ECHO_N "checking for inttypes.h... $ECHO_C" >&6
+if test "${gt_cv_header_inttypes_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_t""no" 1>&6
-fi
- fi
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <inttypes.h>
+int
+main ()
+{
- if test "$gt_cv_func_gettext_libc" = "yes" \
- || test "$gt_cv_func_gettext_libintl" = "yes"; then
- cat >> confdefs.h <<\EOF
-#define HAVE_GETTEXT 1
-EOF
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_header_inttypes_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_header_inttypes_h=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $gt_cv_header_inttypes_h" >&5
+echo "${ECHO_T}$gt_cv_header_inttypes_h" >&6
+ if test $gt_cv_header_inttypes_h = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_INTTYPES_H 1
+_ACEOF
- # Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2784: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ fi
+
+
+
+ if test $gt_cv_header_inttypes_h = yes; then
+ echo "$as_me:$LINENO: checking whether the inttypes.h PRIxNN macros are broken" >&5
+echo $ECHO_N "checking whether the inttypes.h PRIxNN macros are broken... $ECHO_C" >&6
+if test "${gt_cv_inttypes_pri_broken+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- case "$MSGFMT" in
- /*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <inttypes.h>
+#ifdef PRId32
+char *p = PRId32;
+#endif
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_inttypes_pri_broken=no
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_inttypes_pri_broken=yes
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $gt_cv_inttypes_pri_broken" >&5
+echo "${ECHO_T}$gt_cv_inttypes_pri_broken" >&6
+ fi
+ if test "$gt_cv_inttypes_pri_broken" = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define PRI_MACROS_BROKEN 1
+_ACEOF
+
+ fi
+
+
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi;
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo "$as_me:$LINENO: checking for ld used by GCC" >&5
+echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
*)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${acl_cv_path_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
- break
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ test "$with_gnu_ld" != no && break
+ else
+ test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no"
- ;;
-esac
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test -n "$MSGFMT"; then
- echo "$ac_t""$MSGFMT" 1>&6
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
- if test "$MSGFMT" != "no"; then
- for ac_func in dcgettext
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2818: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2823 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${acl_cv_prog_gnu_ld+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+ acl_cv_prog_gnu_ld=yes
+else
+ acl_cv_prog_gnu_ld=no
+fi
+fi
+echo "$as_me:$LINENO: result: $acl_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6
+with_gnu_ld=$acl_cv_prog_gnu_ld
-int main() {
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:2846: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
+ echo "$as_me:$LINENO: checking for shared library run path origin" >&5
+echo $ECHO_N "checking for shared library run path origin... $ECHO_C" >&6
+if test "${acl_cv_rpath+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_t""no" 1>&6
-fi
-done
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2873: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GMSGFMT" in
- /*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
- ;;
-esac
-fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
-if test -n "$GMSGFMT"; then
- echo "$ac_t""$GMSGFMT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
- # Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2909: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$XGETTEXT" in
- /*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test -n "$XGETTEXT"; then
- echo "$ac_t""$XGETTEXT" 1>&6
+echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5
+echo "${ECHO_T}$acl_cv_rpath" >&6
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath or --disable-rpath was given.
+if test "${enable_rpath+set}" = set; then
+ enableval="$enable_rpath"
+ :
else
- echo "$ac_t""no" 1>&6
-fi
+ enable_rpath=yes
+fi;
- cat > conftest.$ac_ext <<EOF
-#line 2941 "configure"
-#include "confdefs.h"
-int main() {
-extern int _nl_msg_cat_cntr;
- return _nl_msg_cat_cntr
-; return 0; }
-EOF
-if { (eval echo configure:2949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- CATOBJEXT=.gmo
- DATADIRNAME=share
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- CATOBJEXT=.mo
- DATADIRNAME=lib
-fi
-rm -f conftest*
- INSTOBJEXT=.mo
- fi
- fi
-
-else
- echo "$ac_t""no" 1>&6
-fi
- if test "$CATOBJEXT" = "NONE"; then
- echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:2972: checking whether catgets can be used" >&5
- # Check whether --with-catgets or --without-catgets was given.
-if test "${with_catgets+set}" = set; then
- withval="$with_catgets"
- nls_cv_use_catgets=$withval
-else
- nls_cv_use_catgets=no
-fi
- echo "$ac_t""$nls_cv_use_catgets" 1>&6
- if test "$nls_cv_use_catgets" = "yes"; then
- echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:2985: checking for main in -li" >&5
-ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-li $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 2993 "configure"
-#include "confdefs.h"
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:3000: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+ use_additional=yes
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo i | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
- LIBS="-li $LIBS"
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
-else
- echo "$ac_t""no" 1>&6
-fi
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
- echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:3028: checking for catgets" >&5
-if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3033 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char catgets(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char catgets();
-int main() {
+# Check whether --with-libiconv-prefix or --without-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then
+ withval="$with_libiconv_prefix"
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_catgets) || defined (__stub___catgets)
-choke me
-#else
-catgets();
-#endif
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
-; return 0; }
-EOF
-if { (eval echo configure:3056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_catgets=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_catgets=no"
-fi
-rm -f conftest*
-fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
-if eval "test \"`echo '$ac_cv_func_'catgets`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_CATGETS 1
-EOF
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
- INTLOBJS="\$(CATOBJS)"
- # Extract the first word of "gencat", so it can be a program name with args.
-set dummy gencat; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3078: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GENCAT" in
- /*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_GENCAT="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no"
- ;;
-esac
-fi
-GENCAT="$ac_cv_path_GENCAT"
-if test -n "$GENCAT"; then
- echo "$ac_t""$GENCAT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
- if test "$GENCAT" != "no"; then
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3114: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GMSGFMT" in
- /*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
- ;;
-esac
-fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
-if test -n "$GMSGFMT"; then
- echo "$ac_t""$GMSGFMT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
- if test "$GMSGFMT" = "no"; then
- # Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3151: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GMSGFMT" in
- /*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
- break
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
fi
fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no"
- ;;
-esac
-fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
-if test -n "$GMSGFMT"; then
- echo "$ac_t""$GMSGFMT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
- fi
- # Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3186: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$XGETTEXT" in
- /*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
- break
+fi;
+ LIBICONV=
+ LTLIBICONV=
+ INCICONV=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='iconv '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ fi
+ fi
fi
- fi
+ done
done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test -n "$XGETTEXT"; then
- echo "$ac_t""$XGETTEXT" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+ done
+ fi
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.cat
- INSTOBJEXT=.cat
- DATADIRNAME=lib
- INTLDEPS="../intl/libintl.a"
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
-else
- echo "$ac_t""no" 1>&6
-fi
- fi
- fi
- if test "$CATOBJEXT" = "NONE"; then
- nls_cv_use_gnu_gettext=yes
- fi
- fi
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- INTLOBJS="\$(GETTOBJS)"
- # Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3244: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+
+
+
+
+
+
+
+
+
+for ac_header in argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
else
- case "$MSGFMT" in
- /*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
- ;;
-esac
+ ac_cpp_err=yes
fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test -n "$MSGFMT"; then
- echo "$ac_t""$MSGFMT" 1>&6
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3278: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$GMSGFMT" in
- /*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
- ;;
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to the pspp lists. ##
+## ------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
esac
-fi
-GMSGFMT="$ac_cv_path_GMSGFMT"
-if test -n "$GMSGFMT"; then
- echo "$ac_t""$GMSGFMT" 1>&6
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_t""no" 1>&6
+ eval "$as_ac_Header=\$ac_header_preproc"
fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
- # Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3314: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$XGETTEXT" in
- /*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
- break
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test -n "$XGETTEXT"; then
- echo "$ac_t""$XGETTEXT" 1>&6
-else
- echo "$ac_t""no" 1>&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
fi
-
- USE_INCLUDED_LIBINTL=yes
- CATOBJEXT=.gmo
- INSTOBJEXT=.mo
- DATADIRNAME=share
- INTLDEPS="../intl/libintl.a"
- INTLLIBS=$INTLDEPS
- LIBS=`echo $LIBS | sed -e 's/-lintl//'`
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
+done
- if test "$XGETTEXT" != ":"; then
- if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
- : ;
- else
- echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6
- XGETTEXT=":"
- fi
- fi
- # We need to process the po/ directory.
- POSUB=po
- else
- DATADIRNAME=share
- nls_cv_header_intl=intl/libintl.h
- nls_cv_header_libgt=intl/libgettext.h
- fi
- # If this is used in GNU gettext we have to set USE_NLS to `yes'
- # because some of the sources are only built for this goal.
- if test "$PACKAGE" = gettext; then
- USE_NLS=yes
- USE_INCLUDED_LIBINTL=yes
- fi
- for lang in $ALL_LINGUAS; do
- GMOFILES="$GMOFILES $lang.gmo"
- POFILES="$POFILES $lang.po"
- done
-
-
-
-
-
-
-
-
-
-
-
-
-
- if test "x$CATOBJEXT" != "x"; then
- if test "x$ALL_LINGUAS" = "x"; then
- LINGUAS=
- else
- echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:3404: checking for catalogs to be installed" >&5
- NEW_LINGUAS=
- for lang in ${LINGUAS=$ALL_LINGUAS}; do
- case "$ALL_LINGUAS" in
- *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
- esac
- done
- LINGUAS=$NEW_LINGUAS
- echo "$ac_t""$LINGUAS" 1>&6
- fi
- if test -n "$LINGUAS"; then
- for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
- fi
- fi
- test -d intl || mkdir intl
- if test "$CATOBJEXT" = ".cat"; then
- ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:3424: checking for linux/version.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3429 "configure"
-#include "confdefs.h"
-#include <linux/version.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3434: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- msgformat=linux
-else
- echo "$ac_t""no" 1>&6
-msgformat=xopen
-fi
- sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed
- fi
- sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
- $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed
-
- if test "$PACKAGE" = "gettext"; then
- GT_NO="#NO#"
- GT_YES=
- else
- GT_NO=
- GT_YES="#YES#"
- fi
-
-
- MKINSTALLDIRS=
- if test $ac_aux_dir; then
- MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
- fi
- if test -z $MKINSTALLDIRS; then
- MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
- fi
-
- if test "${enable_shared+set}" = set; then
- l=l
- else
- l=
- fi
-
-
- test -d po || mkdir po
- if test "x$srcdir" != "x."; then
- if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
- posrcprefix="$srcdir/"
- else
- posrcprefix="../$srcdir/"
- fi
- else
- posrcprefix="../"
- fi
- sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
- < $srcdir/po/POTFILES.in > po/POTFILES
-
-# Check whether --with-checker or --without-checker was given.
-if test "${with_checker+set}" = set; then
- withval="$with_checker"
- CC="checkergcc" LOCAL_CC="gcc" CC_OPTIONS="-Werror"
-fi
-# Check whether --enable-debugging or --disable-debugging was given.
-if test "${enable_debugging+set}" = set; then
- enableval="$enable_debugging"
- CC_OPTIONS="-DDEBUGGING=1"
-fi
-# LOCAL_CC runs on the build system, targets the build system.
-# CC runs on the build system, targets the host system.
-if test -z "$LOCAL_CC"; then
- LOCAL_CC="$CC"
-fi
-echo $ac_n "checking for sin in -lm""... $ac_c" 1>&6
-echo "configure:3525: checking for sin in -lm" >&5
-ac_lib_var=`echo m'_'sin | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lm $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3533 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char sin();
-
-int main() {
-sin()
-; return 0; }
-EOF
-if { (eval echo configure:3544: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo m | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
- LIBS="-lm $LIBS"
-else
- echo "$ac_t""no" 1>&6
-fi
-echo $ac_n "checking for mpf_get_str in -lgmp""... $ac_c" 1>&6
-echo "configure:3572: checking for mpf_get_str in -lgmp" >&5
-ac_lib_var=`echo gmp'_'mpf_get_str | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lgmp $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3580 "configure"
-#include "confdefs.h"
+for ac_func in feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \
+geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \
+strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \
+__fsetlocking
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char mpf_get_str();
-
-int main() {
-mpf_get_str()
-; return 0; }
-EOF
-if { (eval echo configure:3591: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+
+
+
+
+
+ am_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCICONV; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ echo "$as_me:$LINENO: checking for iconv" >&5
+echo $ECHO_N "checking for iconv... $ECHO_C" >&6
+if test "${am_cv_func_iconv+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_func_iconv=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5
+echo "${ECHO_T}$am_cv_func_iconv" >&6
+ if test "$am_cv_func_iconv" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_ICONV 1
+_ACEOF
+
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ echo "$as_me:$LINENO: checking how to link with libiconv" >&5
+echo $ECHO_N "checking how to link with libiconv... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $LIBICONV" >&5
+echo "${ECHO_T}$LIBICONV" >&6
+ else
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+
+
+
+ if test "$am_cv_func_iconv" = yes; then
+ echo "$as_me:$LINENO: checking for iconv declaration" >&5
+echo $ECHO_N "checking for iconv declaration... $ECHO_C" >&6
+ if test "${am_cv_proto_iconv+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_proto_iconv_arg1=""
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+am_cv_proto_iconv_arg1="const"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
+fi
+
+ am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ echo "$as_me:$LINENO: result: ${ac_t:-
+ }$am_cv_proto_iconv" >&5
+echo "${ECHO_T}${ac_t:-
+ }$am_cv_proto_iconv" >&6
+
+cat >>confdefs.h <<_ACEOF
+#define ICONV_CONST $am_cv_proto_iconv_arg1
+_ACEOF
+
+ fi
+
+
+ echo "$as_me:$LINENO: checking for nl_langinfo and CODESET" >&5
+echo $ECHO_N "checking for nl_langinfo and CODESET... $ECHO_C" >&6
+if test "${am_cv_langinfo_codeset+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <langinfo.h>
+int
+main ()
+{
+char* cs = nl_langinfo(CODESET);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_langinfo_codeset=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+am_cv_langinfo_codeset=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_langinfo_codeset" >&5
+echo "${ECHO_T}$am_cv_langinfo_codeset" >&6
+ if test $am_cv_langinfo_codeset = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LANGINFO_CODESET 1
+_ACEOF
+
+ fi
+
+ if test $ac_cv_header_locale_h = yes; then
+
+ echo "$as_me:$LINENO: checking for LC_MESSAGES" >&5
+echo $ECHO_N "checking for LC_MESSAGES... $ECHO_C" >&6
+if test "${am_cv_val_LC_MESSAGES+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <locale.h>
+int
+main ()
+{
+return LC_MESSAGES
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_val_LC_MESSAGES=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+am_cv_val_LC_MESSAGES=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $am_cv_val_LC_MESSAGES" >&5
+echo "${ECHO_T}$am_cv_val_LC_MESSAGES" >&6
+ if test $am_cv_val_LC_MESSAGES = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LC_MESSAGES 1
+_ACEOF
+
+ fi
+
+ fi
+
+ for ac_prog in bison
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_INTLBISON+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$INTLBISON"; then
+ ac_cv_prog_INTLBISON="$INTLBISON" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_INTLBISON="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+INTLBISON=$ac_cv_prog_INTLBISON
+if test -n "$INTLBISON"; then
+ echo "$as_me:$LINENO: result: $INTLBISON" >&5
+echo "${ECHO_T}$INTLBISON" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$INTLBISON" && break
+done
+
+ if test -z "$INTLBISON"; then
+ ac_verc_fail=yes
+ else
+ echo "$as_me:$LINENO: checking version of bison" >&5
+echo $ECHO_N "checking version of bison... $ECHO_C" >&6
+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac
+ echo "$as_me:$LINENO: result: $ac_prog_version" >&5
+echo "${ECHO_T}$ac_prog_version" >&6
+ fi
+ if test $ac_verc_fail = yes; then
+ INTLBISON=:
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking whether NLS is requested" >&5
+echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6
+ # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+ enableval="$enable_nls"
+ USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi;
+ echo "$as_me:$LINENO: result: $USE_NLS" >&5
+echo "${ECHO_T}$USE_NLS" >&6
+
+
+
+
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+
+ echo "$as_me:$LINENO: checking whether included gettext is requested" >&5
+echo $ECHO_N "checking whether included gettext is requested... $ECHO_C" >&6
+
+# Check whether --with-included-gettext or --without-included-gettext was given.
+if test "${with_included_gettext+set}" = set; then
+ withval="$with_included_gettext"
+ nls_cv_force_use_gnu_gettext=$withval
+else
+ nls_cv_force_use_gnu_gettext=no
+fi;
+ echo "$as_me:$LINENO: result: $nls_cv_force_use_gnu_gettext" >&5
+echo "${ECHO_T}$nls_cv_force_use_gnu_gettext" >&6
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5
+echo $ECHO_N "checking for GNU gettext in libc... $ECHO_C" >&6
+if test "${gt_cv_func_gnugettext1_libc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <libintl.h>
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+int
+main ()
+{
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_func_gnugettext1_libc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_func_gnugettext1_libc=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libc" >&5
+echo "${ECHO_T}$gt_cv_func_gnugettext1_libc" >&6
+
+ if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix or --without-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then
+ withval="$with_libintl_prefix"
+
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi;
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='intl '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+ done
+ fi
+
+ echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5
+echo $ECHO_N "checking for GNU gettext in libintl... $ECHO_C" >&6
+if test "${gt_cv_func_gnugettext1_libintl+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <libintl.h>
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();
+int
+main ()
+{
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias (0)
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_func_gnugettext1_libintl=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_func_gnugettext1_libintl=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "$gt_cv_func_gnugettext1_libintl" != yes && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <libintl.h>
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias ();
+int
+main ()
+{
+bindtextdomain ("", "");
+return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias (0)
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ gt_cv_func_gnugettext1_libintl=yes
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"
+fi
+echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libintl" >&5
+echo "${ECHO_T}$gt_cv_func_gnugettext1_libintl" >&6
+ fi
+
+ if test "$gt_cv_func_gnugettext1_libc" = "yes" \
+ || { test "$gt_cv_func_gnugettext1_libintl" = "yes" \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="\${top_builddir}/intl/libintl.a $LIBICONV"
+ LTLIBINTL="\${top_builddir}/intl/libintl.a $LTLIBICONV"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ CATOBJEXT=.gmo
+ fi
+
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_NLS 1
+_ACEOF
+
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ echo "$as_me:$LINENO: checking whether to use NLS" >&5
+echo $ECHO_N "checking whether to use NLS... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $USE_NLS" >&5
+echo "${ECHO_T}$USE_NLS" >&6
+ if test "$USE_NLS" = "yes"; then
+ echo "$as_me:$LINENO: checking where the gettext function comes from" >&5
+echo $ECHO_N "checking where the gettext function comes from... $ECHO_C" >&6
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ echo "$as_me:$LINENO: result: $gt_source" >&5
+echo "${ECHO_T}$gt_source" >&6
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then
+ echo "$as_me:$LINENO: checking how to link with libintl" >&5
+echo $ECHO_N "checking how to link with libintl... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $LIBINTL" >&5
+echo "${ECHO_T}$LIBINTL" >&6
+
+ for element in $INCINTL; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+ fi
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GETTEXT 1
+_ACEOF
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_DCGETTEXT 1
+_ACEOF
+
+ fi
+
+ POSUB=po
+ fi
+
+
+ if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+
+
+
+
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ DATADIRNAME=share
+
+
+ INSTOBJEXT=.mo
+
+
+ GENCAT=gencat
+
+
+ if test "$USE_INCLUDED_LIBINTL" = yes; then
+ INTLOBJS="\$(GETTOBJS)"
+ fi
+
+
+ INTL_LIBTOOL_SUFFIX_PREFIX=
+
+
+
+ INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+
+echo "$as_me:$LINENO: checking for sin in -lm" >&5
+echo $ECHO_N "checking for sin in -lm... $ECHO_C" >&6
+if test "${ac_cv_lib_m_sin+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char sin ();
+int
+main ()
+{
+sin ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_m_sin=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_m_sin=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_m_sin" >&5
+echo "${ECHO_T}$ac_cv_lib_m_sin" >&6
+if test $ac_cv_lib_m_sin = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBM 1
+_ACEOF
+
+ LIBS="-lm $LIBS"
+
+fi
+
+echo "$as_me:$LINENO: checking for mpf_get_str in -lgmp" >&5
+echo $ECHO_N "checking for mpf_get_str in -lgmp... $ECHO_C" >&6
+if test "${ac_cv_lib_gmp_mpf_get_str+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgmp $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char mpf_get_str ();
+int
+main ()
+{
+mpf_get_str ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_gmp_mpf_get_str=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_gmp_mpf_get_str=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_gmp_mpf_get_str" >&5
+echo "${ECHO_T}$ac_cv_lib_gmp_mpf_get_str" >&6
+if test $ac_cv_lib_gmp_mpf_get_str = yes; then
+ LIBS="-lgmp $LIBS"
+else
+ echo "$as_me:$LINENO: checking for __gmpf_get_str in -lgmp" >&5
+echo $ECHO_N "checking for __gmpf_get_str in -lgmp... $ECHO_C" >&6
+if test "${ac_cv_lib_gmp___gmpf_get_str+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lgmp $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char __gmpf_get_str ();
+int
+main ()
+{
+__gmpf_get_str ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_gmp___gmpf_get_str=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_gmp___gmpf_get_str=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_gmp___gmpf_get_str" >&5
+echo "${ECHO_T}$ac_cv_lib_gmp___gmpf_get_str" >&6
+if test $ac_cv_lib_gmp___gmpf_get_str = yes; then
+ LIBS="-lgmp $LIBS"
+fi
+
+fi
+
+
+echo "$as_me:$LINENO: checking for tgetent in -lncurses" >&5
+echo $ECHO_N "checking for tgetent in -lncurses... $ECHO_C" >&6
+if test "${ac_cv_lib_ncurses_tgetent+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncurses $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char tgetent ();
+int
+main ()
+{
+tgetent ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_ncurses_tgetent=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_ncurses_tgetent=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_ncurses_tgetent" >&5
+echo "${ECHO_T}$ac_cv_lib_ncurses_tgetent" >&6
+if test $ac_cv_lib_ncurses_tgetent = yes; then
+ LIBS="-lncurses $LIBS" termcap=yes
+else
+ echo "$as_me:$LINENO: checking for tgetent in -ltermcap" >&5
+echo $ECHO_N "checking for tgetent in -ltermcap... $ECHO_C" >&6
+if test "${ac_cv_lib_termcap_tgetent+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ltermcap $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char tgetent ();
+int
+main ()
+{
+tgetent ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_termcap_tgetent=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_termcap_tgetent=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_termcap_tgetent" >&5
+echo "${ECHO_T}$ac_cv_lib_termcap_tgetent" >&6
+if test $ac_cv_lib_termcap_tgetent = yes; then
+ LIBS="-ltermcap $LIBS" termcap=yes
+else
+ termcap=no
+fi
+
+fi
+
+if test "$termcap" = yes; then
+
+for ac_header in termcap.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to the pspp lists. ##
+## ------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LIBTERMCAP 1
+_ACEOF
+
+fi
+
+
+echo "$as_me:$LINENO: checking for readline in -lreadline" >&5
+echo $ECHO_N "checking for readline in -lreadline... $ECHO_C" >&6
+if test "${ac_cv_lib_readline_readline+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lreadline $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char readline ();
+int
+main ()
+{
+readline ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_readline_readline=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_readline_readline=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_readline_readline" >&5
+echo "${ECHO_T}$ac_cv_lib_readline_readline" >&6
+if test $ac_cv_lib_readline_readline = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBREADLINE 1
+_ACEOF
+
+ LIBS="-lreadline $LIBS"
+
+fi
+
+if test "$ac_cv_lib_readline_readline" = yes; then
+
+for ac_header in readline/readline.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to the pspp lists. ##
+## ------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ echo "$as_me:$LINENO: checking for add_history in -lreadline" >&5
+echo $ECHO_N "checking for add_history in -lreadline... $ECHO_C" >&6
+if test "${ac_cv_lib_readline_add_history+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lreadline $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char add_history ();
+int
+main ()
+{
+add_history ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_readline_add_history=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_readline_add_history=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_readline_add_history" >&5
+echo "${ECHO_T}$ac_cv_lib_readline_add_history" >&6
+if test $ac_cv_lib_readline_add_history = yes; then
+ history=yes
+else
+ echo "$as_me:$LINENO: checking for add_history in -lhistory" >&5
+echo $ECHO_N "checking for add_history in -lhistory... $ECHO_C" >&6
+if test "${ac_cv_lib_history_add_history+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lhistory $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char add_history ();
+int
+main ()
+{
+add_history ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_history_add_history=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_history_add_history=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_history_add_history" >&5
+echo "${ECHO_T}$ac_cv_lib_history_add_history" >&6
+if test $ac_cv_lib_history_add_history = yes; then
+ LIBS="-lhistory" history=yes
+else
+ history=no
+fi
+
+fi
+
+ if test "$history" = yes; then
+
+for ac_header in readline/history.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to the pspp lists. ##
+## ------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_LIBHISTORY 1
+_ACEOF
+
+ fi
+fi
+
+
+
+
+
+
+
+
+
+
+
+for ac_header in limits.h memory.h sys/stat.h sys/time.h sys/types.h \
+ fpu_control.h sys/mman.h sys/wait.h ieeefp.h fenv.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## ------------------------------- ##
+## Report this to the pspp lists. ##
+## ------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+echo "$as_me:$LINENO: checking whether stat file-mode macros are broken" >&5
+echo $ECHO_N "checking whether stat file-mode macros are broken... $ECHO_C" >&6
+if test "${ac_cv_header_stat_broken+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#if defined(S_ISBLK) && defined(S_IFDIR)
+# if S_ISBLK (S_IFDIR)
+You lose.
+# endif
+#endif
+
+#if defined(S_ISBLK) && defined(S_IFCHR)
+# if S_ISBLK (S_IFCHR)
+You lose.
+# endif
+#endif
+
+#if defined(S_ISLNK) && defined(S_IFREG)
+# if S_ISLNK (S_IFREG)
+You lose.
+# endif
+#endif
+
+#if defined(S_ISSOCK) && defined(S_IFREG)
+# if S_ISSOCK (S_IFREG)
+You lose.
+# endif
+#endif
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "You lose" >/dev/null 2>&1; then
+ ac_cv_header_stat_broken=yes
+else
+ ac_cv_header_stat_broken=no
+fi
+rm -f conftest*
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stat_broken" >&5
+echo "${ECHO_T}$ac_cv_header_stat_broken" >&6
+if test $ac_cv_header_stat_broken = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STAT_MACROS_BROKEN 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5
+echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6
+if test "${ac_cv_header_time+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/time.h>
+#include <time.h>
+
+int
+main ()
+{
+if ((struct tm *) 0)
+return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_time=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_time=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5
+echo "${ECHO_T}$ac_cv_header_time" >&6
+if test $ac_cv_header_time = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TIME_WITH_SYS_TIME 1
+_ACEOF
+
+fi
+
+
+echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+if test "${ac_cv_c_const+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset x;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *ccp;
+ char **p;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ ccp = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++ccp;
+ p = (char**) ccp;
+ ccp = (char const *const *) p;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ }
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_const=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_c_const=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+echo "${ECHO_T}$ac_cv_c_const" >&6
+if test $ac_cv_c_const = no; then
+
+cat >>confdefs.h <<\_ACEOF
+#define const
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking for inline" >&5
+echo $ECHO_N "checking for inline... $ECHO_C" >&6
+if test "${ac_cv_c_inline+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_inline=$ac_kw; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+echo "${ECHO_T}$ac_cv_c_inline" >&6
+
+
+case $ac_cv_c_inline in
+ inline | yes) ;;
+ *)
+ case $ac_cv_c_inline in
+ no) ac_val=;;
+ *) ac_val=$ac_cv_c_inline;;
+ esac
+ cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+ ;;
+esac
+
+echo "$as_me:$LINENO: checking for size_t" >&5
+echo $ECHO_N "checking for size_t... $ECHO_C" >&6
+if test "${ac_cv_type_size_t+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((size_t *) 0)
+ return 0;
+if (sizeof (size_t))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_size_t=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_size_t=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+echo "${ECHO_T}$ac_cv_type_size_t" >&6
+if test $ac_cv_type_size_t = yes; then
+ :
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned
+_ACEOF
+
+fi
+
+echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5
+echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6
+if test "${ac_cv_struct_tm+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <time.h>
+
+int
+main ()
+{
+struct tm *tp; tp->tm_sec;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_struct_tm=time.h
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_struct_tm=sys/time.h
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5
+echo "${ECHO_T}$ac_cv_struct_tm" >&6
+if test $ac_cv_struct_tm = sys/time.h; then
+
+cat >>confdefs.h <<\_ACEOF
+#define TM_IN_SYS_TIME 1
+_ACEOF
+
+fi
+
+
+echo "$as_me:$LINENO: checking for short" >&5
+echo $ECHO_N "checking for short... $ECHO_C" >&6
+if test "${ac_cv_type_short+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((short *) 0)
+ return 0;
+if (sizeof (short))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_short=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_short=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_short" >&5
+echo "${ECHO_T}$ac_cv_type_short" >&6
+
+echo "$as_me:$LINENO: checking size of short" >&5
+echo $ECHO_N "checking size of short... $ECHO_C" >&6
+if test "${ac_cv_sizeof_short+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_short" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (short))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_short=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (short)); }
+unsigned long ulongval () { return (long) (sizeof (short)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (short))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (short))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (short))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_short=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (short), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_short=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_short" >&5
+echo "${ECHO_T}$ac_cv_sizeof_short" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_SHORT $ac_cv_sizeof_short
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for int" >&5
+echo $ECHO_N "checking for int... $ECHO_C" >&6
+if test "${ac_cv_type_int+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((int *) 0)
+ return 0;
+if (sizeof (int))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_int=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_int=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_int" >&5
+echo "${ECHO_T}$ac_cv_type_int" >&6
+
+echo "$as_me:$LINENO: checking size of int" >&5
+echo $ECHO_N "checking size of int... $ECHO_C" >&6
+if test "${ac_cv_sizeof_int+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_int" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (int))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_int=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (int)); }
+unsigned long ulongval () { return (long) (sizeof (int)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (int))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (int))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (int))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_int=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (int), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_int=0
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_int" >&5
+echo "${ECHO_T}$ac_cv_sizeof_int" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_INT $ac_cv_sizeof_int
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for long" >&5
+echo $ECHO_N "checking for long... $ECHO_C" >&6
+if test "${ac_cv_type_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((long *) 0)
+ return 0;
+if (sizeof (long))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_long=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_long=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_long" >&5
+echo "${ECHO_T}$ac_cv_type_long" >&6
+
+echo "$as_me:$LINENO: checking size of long" >&5
+echo $ECHO_N "checking size of long... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_long" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_long=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (long)); }
+unsigned long ulongval () { return (long) (sizeof (long)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (long))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (long))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (long))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_long=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_long=0
fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- LIBS="-lgmp $LIBS" GMP_SUBDIRS= GMP_LIBS=
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG $ac_cv_sizeof_long
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for long long" >&5
+echo $ECHO_N "checking for long long... $ECHO_C" >&6
+if test "${ac_cv_type_long_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_t""no" 1>&6
-GMP_SUBDIRS=gmp GMP_LIBS='$(GMP_LIBS)'
-fi
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((long long *) 0)
+ return 0;
+if (sizeof (long long))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_long_long=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_long_long=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_long_long" >&5
+echo "${ECHO_T}$ac_cv_type_long_long" >&6
+
+echo "$as_me:$LINENO: checking size of long long" >&5
+echo $ECHO_N "checking size of long long... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long_long+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_long_long" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) <= $ac_mid)];
+test_array [0] = 0
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) < 0)];
+test_array [0] = 0
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) >= $ac_mid)];
+test_array [0] = 0
-echo $ac_n "checking for tgetent in -lncurses""... $ac_c" 1>&6
-echo "configure:3616: checking for tgetent in -lncurses" >&5
-ac_lib_var=`echo ncurses'_'tgetent | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
else
- ac_save_LIBS="$LIBS"
-LIBS="-lncurses $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3624 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char tgetent();
-
-int main() {
-tgetent()
-; return 0; }
-EOF
-if { (eval echo configure:3635: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_lo= ac_hi=
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- LIBS="-lncurses $LIBS" termcap=yes
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for tgetent in -ltermcap""... $ac_c" 1>&6
-echo "configure:3654: checking for tgetent in -ltermcap" >&5
-ac_lib_var=`echo termcap'_'tgetent | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ltermcap $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3662 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char tgetent();
-
-int main() {
-tgetent()
-; return 0; }
-EOF
-if { (eval echo configure:3673: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long long))) <= $ac_mid)];
+test_array [0] = 0
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- LIBS="-ltermcap $LIBS" termcap=yes
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_long_long=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long long), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
else
- echo "$ac_t""no" 1>&6
-termcap=no
-fi
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (long long)); }
+unsigned long ulongval () { return (long) (sizeof (long long)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
-fi
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (long long))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (long long))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (long long))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
-if test "$termcap" = yes; then
- for ac_hdr in termcap.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3701: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3706 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3711: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_long_long=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long long), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long long), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_long_long=0
fi
-rm -f conftest*
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_long" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long_long" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for float" >&5
+echo $ECHO_N "checking for float... $ECHO_C" >&6
+if test "${ac_cv_type_float+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((float *) 0)
+ return 0;
+if (sizeof (float))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_float=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_float=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_float" >&5
+echo "${ECHO_T}$ac_cv_type_float" >&6
+
+echo "$as_me:$LINENO: checking size of float" >&5
+echo $ECHO_N "checking size of float... $ECHO_C" >&6
+if test "${ac_cv_sizeof_float+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_float" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (float))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (float))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (float))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (float))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo= ac_hi=
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (float))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
+case $ac_lo in
+?*) ac_cv_sizeof_float=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (float), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (float), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (float)); }
+unsigned long ulongval () { return (long) (sizeof (float)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
- cat >> confdefs.h <<\EOF
-#define HAVE_LIBTERMCAP 1
-EOF
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (float))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (float))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (float))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_float=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (float), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (float), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
+else
+ ac_cv_sizeof_float=0
fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_float" >&5
+echo "${ECHO_T}$ac_cv_sizeof_float" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_FLOAT $ac_cv_sizeof_float
+_ACEOF
-echo $ac_n "checking for readline in -lreadline""... $ac_c" 1>&6
-echo "configure:3744: checking for readline in -lreadline" >&5
-ac_lib_var=`echo readline'_'readline | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+echo "$as_me:$LINENO: checking for double" >&5
+echo $ECHO_N "checking for double... $ECHO_C" >&6
+if test "${ac_cv_type_double+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_save_LIBS="$LIBS"
-LIBS="-lreadline $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3752 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char readline();
-
-int main() {
-readline()
-; return 0; }
-EOF
-if { (eval echo configure:3763: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((double *) 0)
+ return 0;
+if (sizeof (double))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_double=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_double=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_double" >&5
+echo "${ECHO_T}$ac_cv_type_double" >&6
+
+echo "$as_me:$LINENO: checking size of double" >&5
+echo $ECHO_N "checking size of double... $ECHO_C" >&6
+if test "${ac_cv_sizeof_double+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_double" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) >= 0)];
+test_array [0] = 0
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_lib=HAVE_LIB`echo readline | sed -e 's/[^a-zA-Z0-9_]/_/g' \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_lib 1
-EOF
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) <= $ac_mid)];
+test_array [0] = 0
- LIBS="-lreadline $LIBS"
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) >= $ac_mid)];
+test_array [0] = 0
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
else
- echo "$ac_t""no" 1>&6
-fi
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-if test "$ac_cv_lib_readline_readline" = yes; then
- for ac_hdr in readline/readline.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3795: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3800 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3805: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
+ac_lo= ac_hi=
fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (double))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
done
+case $ac_lo in
+?*) ac_cv_sizeof_double=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (double), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (double), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (double)); }
+unsigned long ulongval () { return (long) (sizeof (double)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (double))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (double))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (double))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
- echo $ac_n "checking for add_history in -lreadline""... $ac_c" 1>&6
-echo "configure:3832: checking for add_history in -lreadline" >&5
-ac_lib_var=`echo readline'_'add_history | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_double=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (double), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (double), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
else
- ac_save_LIBS="$LIBS"
-LIBS="-lreadline $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3840 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char add_history();
-
-int main() {
-add_history()
-; return 0; }
-EOF
-if { (eval echo configure:3851: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ ac_cv_sizeof_double=0
fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- history=yes
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_double" >&5
+echo "${ECHO_T}$ac_cv_sizeof_double" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_DOUBLE $ac_cv_sizeof_double
+_ACEOF
+
+
+echo "$as_me:$LINENO: checking for long double" >&5
+echo $ECHO_N "checking for long double... $ECHO_C" >&6
+if test "${ac_cv_type_long_double+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for add_history in -lhistory""... $ac_c" 1>&6
-echo "configure:3870: checking for add_history in -lhistory" >&5
-ac_lib_var=`echo history'_'add_history | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+if ((long double *) 0)
+ return 0;
+if (sizeof (long double))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_type_long_double=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_type_long_double=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_type_long_double" >&5
+echo "${ECHO_T}$ac_cv_type_long_double" >&6
+
+echo "$as_me:$LINENO: checking size of long double" >&5
+echo $ECHO_N "checking size of long double... $ECHO_C" >&6
+if test "${ac_cv_sizeof_long_double+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$ac_cv_type_long_double" = yes; then
+ # The cast to unsigned long works around a bug in the HP C Compiler
+ # version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+ # declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+ # This bug is HP SR number 8606223364.
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) >= 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr $ac_mid + 1`
+ if test $ac_lo -le $ac_mid; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
else
- ac_save_LIBS="$LIBS"
-LIBS="-lhistory $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 3878 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char add_history();
-
-int main() {
-add_history()
-; return 0; }
-EOF
-if { (eval echo configure:3889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) < 0)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) >= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_lo=$ac_mid; break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_hi=`expr '(' $ac_mid ')' - 1`
+ if test $ac_mid -le $ac_hi; then
+ ac_lo= ac_hi=
+ break
+ fi
+ ac_mid=`expr 2 '*' $ac_mid`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_lo= ac_hi=
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- LIBS="-lhistory" history=yes
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(((long) (sizeof (long double))) <= $ac_mid)];
+test_array [0] = 0
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_hi=$ac_mid
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_lo=`expr '(' $ac_mid ')' + 1`
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in
+?*) ac_cv_sizeof_long_double=$ac_lo;;
+'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (long double), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long double), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
+else
+ if test "$cross_compiling" = yes; then
+ { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run test program while cross compiling
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+long longval () { return (long) (sizeof (long double)); }
+unsigned long ulongval () { return (long) (sizeof (long double)); }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+ FILE *f = fopen ("conftest.val", "w");
+ if (! f)
+ exit (1);
+ if (((long) (sizeof (long double))) < 0)
+ {
+ long i = longval ();
+ if (i != ((long) (sizeof (long double))))
+ exit (1);
+ fprintf (f, "%ld\n", i);
+ }
+ else
+ {
+ unsigned long i = ulongval ();
+ if (i != ((long) (sizeof (long double))))
+ exit (1);
+ fprintf (f, "%lu\n", i);
+ }
+ exit (ferror (f) || fclose (f) != 0);
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sizeof_long_double=`cat conftest.val`
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+{ { echo "$as_me:$LINENO: error: cannot compute sizeof (long double), 77
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute sizeof (long double), 77
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+rm -f conftest.val
else
- echo "$ac_t""no" 1>&6
-history=no
+ ac_cv_sizeof_long_double=0
fi
-
fi
+echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_double" >&5
+echo "${ECHO_T}$ac_cv_sizeof_long_double" >&6
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_LONG_DOUBLE $ac_cv_sizeof_long_double
+_ACEOF
- if test "$history" = yes; then
- for ac_hdr in readline/history.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3917: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3922 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3927: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
- cat >> confdefs.h <<\EOF
-#define HAVE_LIBHISTORY 1
-EOF
- fi
-fi
-for ac_hdr in limits.h memory.h sys/stat.h sys/time.h sys/types.h \
- fpu_control.h sys/mman.h sys/wait.h ieeefp.h fenv.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3965: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 3970 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3975: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
-done
+cat >>confdefs.h <<\_ACEOF
+#define FPREP_IEEE754 1
+_ACEOF
+
-echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6
-echo "configure:4002: checking whether stat file-mode macros are broken" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
+echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6
+if test "${ac_cv_c_bigendian+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftest.$ac_ext <<EOF
-#line 4007 "configure"
-#include "confdefs.h"
+ # See if sys/param.h defines the BYTE_ORDER macro.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <sys/types.h>
-#include <sys/stat.h>
-
-#if defined(S_ISBLK) && defined(S_IFDIR)
-# if S_ISBLK (S_IFDIR)
-You lose.
-# endif
-#endif
+#include <sys/param.h>
-#if defined(S_ISBLK) && defined(S_IFCHR)
-# if S_ISBLK (S_IFCHR)
-You lose.
-# endif
+int
+main ()
+{
+#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
+ bogus endian macros
#endif
-#if defined(S_ISLNK) && defined(S_IFREG)
-# if S_ISLNK (S_IFREG)
-You lose.
-# endif
-#endif
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ # It does; now see whether it defined to BIG_ENDIAN or not.
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <sys/param.h>
-#if defined(S_ISSOCK) && defined(S_IFREG)
-# if S_ISSOCK (S_IFREG)
-You lose.
-# endif
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+ not big endian
#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "You lose" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_header_stat_broken=yes
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_bigendian=yes
else
- rm -rf conftest*
- ac_cv_header_stat_broken=no
-fi
-rm -f conftest*
-
-fi
-
-echo "$ac_t""$ac_cv_header_stat_broken" 1>&6
-if test $ac_cv_header_stat_broken = yes; then
- cat >> confdefs.h <<\EOF
-#define STAT_MACROS_BROKEN 1
-EOF
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+ac_cv_c_bigendian=no
fi
-
-echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:4058: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4063 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- ac_cv_header_stdc=yes
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 4088 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
- :
-else
- rm -rf conftest*
- ac_cv_header_stdc=no
+# It does not; compile a test program.
+if test "$cross_compiling" = yes; then
+ # try to guess the endianness by grepping values into an object file
+ ac_cv_c_bigendian=unknown
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
+short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
+int
+main ()
+{
+ _ascii (); _ebcdic ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
+ ac_cv_c_bigendian=yes
fi
-rm -f conftest*
-
+if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+ if test "$ac_cv_c_bigendian" = unknown; then
+ ac_cv_c_bigendian=no
+ else
+ # finding both strings is unlikely to happen, but who knows?
+ ac_cv_c_bigendian=unknown
+ fi
fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 4106 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
- :
else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
- :
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
else
- cat > conftest.$ac_ext <<EOF
-#line 4127 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:4138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- :
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+int
+main ()
+{
+ /* Are we little or big endian? From Harbison&Steele. */
+ union
+ {
+ long l;
+ char c[sizeof (long)];
+ } u;
+ u.l = 1;
+ exit (u.c[sizeof (long) - 1] == 1);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_bigendian=no
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_header_stdc=no
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_c_bigendian=yes
fi
-rm -fr conftest*
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
+echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+echo "${ECHO_T}$ac_cv_c_bigendian" >&6
+case $ac_cv_c_bigendian in
+ yes)
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
+cat >>confdefs.h <<\_ACEOF
+#define WORDS_BIGENDIAN 1
+_ACEOF
+ ;;
+ no)
+ ;;
+ *)
+ { { echo "$as_me:$LINENO: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&5
+echo "$as_me: error: unknown endianness
+presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
+ { (exit 1); exit 1; }; } ;;
+esac
-fi
-echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4162: checking whether time.h and sys/time.h may both be included" >&5
-if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+
+echo "$as_me:$LINENO: checking if sprintf returns a char count" >&5
+echo $ECHO_N "checking if sprintf returns a char count... $ECHO_C" >&6
+if test "${blp_is_sprintf_good+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftest.$ac_ext <<EOF
-#line 4167 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-int main() {
-struct tm *tp;
-; return 0; }
-EOF
-if { (eval echo configure:4176: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_header_time=yes
+ if test "$cross_compiling" = yes; then
+ eval "blp_is_sprintf_good=no"
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdio.h>
+ int
+ main()
+ {
+ char s[8];
+ exit((int)sprintf(s, "abcdefg")!=7);
+ }
+
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "blp_is_sprintf_good=yes"
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_time=no
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+eval "blp_is_sprintf_good=no"
fi
-rm -f conftest*
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-echo "$ac_t""$ac_cv_header_time" 1>&6
-if test $ac_cv_header_time = yes; then
- cat >> confdefs.h <<\EOF
-#define TIME_WITH_SYS_TIME 1
-EOF
-
fi
+if test "$blp_is_sprintf_good" = yes; then
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GOOD_SPRINTF 1
+_ACEOF
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
-echo $ac_n "checking for function prototypes""... $ac_c" 1>&6
-echo "configure:4200: checking for function prototypes" >&5
-if test "$am_cv_prog_cc_stdc" != no; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define PROTOTYPES 1
-EOF
- U= ANSI2KNR=
-else
- echo "$ac_t""no" 1>&6
- U=_ ANSI2KNR=./ansi2knr
- # Ensure some checks needed by ansi2knr itself.
- echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:4213: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking number of digits in LONG_MIN (incl. sign)" >&5
+echo $ECHO_N "checking number of digits in LONG_MIN (incl. sign)... $ECHO_C" >&6
+if test "${blp_int_digits+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftest.$ac_ext <<EOF
-#line 4218 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4226: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- ac_cv_header_stdc=yes
+ if test "$cross_compiling" = yes; then
+ eval "blp_int_digits=19"
else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdio.h>
+ #include <limits.h>
+ int
+ main()
+ {
+ int len;
+ char s[80];
+ sprintf(s, "%ld", LONG_MAX);
+ len = strlen(s);
+ sprintf(s, "%ld", LONG_MIN);
+ if(strlen(s)>len) len=strlen(s);
+ sprintf(s, "%lu", ULONG_MAX);
+ if(strlen(s)>len) len=strlen(s);
+ exit(len);
+ }
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 4243 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
- :
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "blp_int_digits=19"
else
- rm -rf conftest*
- ac_cv_header_stdc=no
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+eval "blp_int_digits=$?"
+ if test "$blp_int_digits" -lt 11; then
+ blp_int_digits=11
+ fi
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-rm -f conftest*
fi
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 4261 "configure"
-#include "confdefs.h"
+
+cat >>confdefs.h <<_ACEOF
+#define INT_DIGITS $blp_int_digits
+_ACEOF
+
+echo "$as_me:$LINENO: result: $blp_int_digits" >&5
+echo "${ECHO_T}$blp_int_digits" >&6
+
+echo "$as_me:$LINENO: checking random number generator" >&5
+echo $ECHO_N "checking random number generator... $ECHO_C" >&6
+if test "${blp_random_good+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
- :
+int
+main ()
+{
+int x=RAND_MAX;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ blp_random_good=yes
else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+blp_random_good=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
fi
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
- :
-else
- cat > conftest.$ac_ext <<EOF
-#line 4282 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
+if test "$blp_random_good" = yes; then
-EOF
-if { (eval echo configure:4293: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- :
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GOOD_RANDOM 1
+_ACEOF
+
+ echo "$as_me:$LINENO: result: good" >&5
+echo "${ECHO_T}good" >&6
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_header_stdc=no
-fi
-rm -fr conftest*
+ echo "$as_me:$LINENO: result: bad" >&5
+echo "${ECHO_T}bad" >&6
fi
-fi
-fi
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments. Useless!
+echo "$as_me:$LINENO: checking for working alloca.h" >&5
+echo $ECHO_N "checking for working alloca.h... $ECHO_C" >&6
+if test "${ac_cv_working_alloca_h+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <alloca.h>
+int
+main ()
+{
+char *p = (char *) alloca (2 * sizeof (int));
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_working_alloca_h=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_working_alloca_h=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5
+echo "${ECHO_T}$ac_cv_working_alloca_h" >&6
+if test $ac_cv_working_alloca_h = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_ALLOCA_H 1
+_ACEOF
fi
- for ac_hdr in string.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4320: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4325 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4330: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=yes"
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_header_$ac_safe=no"
-fi
-rm -f conftest*
-fi
-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_hdr 1
-EOF
-
+echo "$as_me:$LINENO: checking for alloca" >&5
+echo $ECHO_N "checking for alloca... $ECHO_C" >&6
+if test "${ac_cv_func_alloca_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
+# else
+# if HAVE_ALLOCA_H
+# include <alloca.h>
+# else
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+# endif
+# endif
+# endif
+# endif
+#endif
+
+int
+main ()
+{
+char *p = (char *) alloca (1);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_alloca_works=yes
else
- echo "$ac_t""no" 1>&6
-fi
-done
-
-fi
-
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
-echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4360: checking for working const" >&5
-if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4365 "configure"
-#include "confdefs.h"
-
-int main() {
-
-/* Ultrix mips cc rejects this. */
-typedef int charset[2]; const charset x = {0,0};
-/* SunOS 4.1.1 cc rejects this. */
-char const *const *ccp;
-char **p;
-/* NEC SVR4.0.2 mips cc rejects this. */
-struct point {int x, y;};
-static struct point const zero = {0,0};
-/* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in an arm
- of an if-expression whose if-part is not a constant expression */
-const char *g = "string";
-ccp = &g + (g ? g-g : 0);
-/* HPUX 7.0 cc rejects these. */
-++ccp;
-p = (char**) ccp;
-ccp = (char const *const *) p;
-{ /* SCO 3.2v4 cc rejects this. */
- char *t;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
-}
-{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
-}
-{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
-}
-{ /* AIX XL C 1.02.0.0 rejects this saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; };
- struct s *b; b->j = 5;
-}
-{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
-}
-
-; return 0; }
-EOF
-if { (eval echo configure:4414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_const=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_const=no
+ac_cv_func_alloca_works=no
fi
-rm -f conftest*
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
fi
+echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5
+echo "${ECHO_T}$ac_cv_func_alloca_works" >&6
-echo "$ac_t""$ac_cv_c_const" 1>&6
-if test $ac_cv_c_const = no; then
- cat >> confdefs.h <<\EOF
-#define const
-EOF
+if test $ac_cv_func_alloca_works = yes; then
-fi
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_ALLOCA 1
+_ACEOF
-echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:4435: checking for inline" >&5
-if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
- cat > conftest.$ac_ext <<EOF
-#line 4442 "configure"
-#include "confdefs.h"
-
-int main() {
-} $ac_kw foo() {
-; return 0; }
-EOF
-if { (eval echo configure:4449: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_inline=$ac_kw; break
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
-done
+ # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+# that cause trouble. Some versions do not even contain alloca or
+# contain a buggy version. If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
-fi
+ALLOCA=alloca.$ac_objext
+
+cat >>confdefs.h <<\_ACEOF
+#define C_ALLOCA 1
+_ACEOF
-echo "$ac_t""$ac_cv_c_inline" 1>&6
-case "$ac_cv_c_inline" in
- inline | yes) ;;
- no) cat >> confdefs.h <<\EOF
-#define inline
-EOF
- ;;
- *) cat >> confdefs.h <<EOF
-#define inline $ac_cv_c_inline
-EOF
- ;;
-esac
-echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:4475: checking for size_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5
+echo $ECHO_N "checking whether \`alloca.c' needs Cray hooks... $ECHO_C" >&6
+if test "${ac_cv_os_cray+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- cat > conftest.$ac_ext <<EOF
-#line 4480 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#if defined(CRAY) && ! defined(CRAY2)
+webecray
+#else
+wenotbecray
#endif
-EOF
+
+_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_type_size_t=yes
+ $EGREP "webecray" >/dev/null 2>&1; then
+ ac_cv_os_cray=yes
else
- rm -rf conftest*
- ac_cv_type_size_t=no
+ ac_cv_os_cray=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_type_size_t" 1>&6
-if test $ac_cv_type_size_t = no; then
- cat >> confdefs.h <<\EOF
-#define size_t unsigned
-EOF
-
-fi
+echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5
+echo "${ECHO_T}$ac_cv_os_cray" >&6
+if test $ac_cv_os_cray = yes; then
+ for ac_func in _getb67 GETB67 getb67; do
+ as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
-echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:4508: checking whether struct tm is in sys/time.h or time.h" >&5
-if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4513 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#include <time.h>
-int main() {
-struct tm *tp; tp->tm_sec;
-; return 0; }
-EOF
-if { (eval echo configure:4521: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_struct_tm=time.h
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_struct_tm=sys/time.h
-fi
-rm -f conftest*
-fi
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
-echo "$ac_t""$ac_cv_struct_tm" 1>&6
-if test $ac_cv_struct_tm = sys/time.h; then
- cat >> confdefs.h <<\EOF
-#define TM_IN_SYS_TIME 1
-EOF
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
-fi
+#undef $ac_func
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
-echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:4543: checking size of short" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_short'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_sizeof_short=2
-else
- cat > conftest.$ac_ext <<EOF
-#line 4551 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
+int
+main ()
{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(short));
- exit(0);
+return f != $ac_func;
+ ;
+ return 0;
}
-EOF
-if { (eval echo configure:4562: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_short=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_short=0
-fi
-rm -fr conftest*
-fi
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+
+cat >>confdefs.h <<_ACEOF
+#define CRAY_STACKSEG_END $ac_func
+_ACEOF
+ break
fi
-echo "$ac_t""$ac_cv_sizeof_short" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_SHORT $ac_cv_sizeof_short
-EOF
+ done
+fi
-echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:4582: checking size of int" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking stack direction for C alloca" >&5
+echo $ECHO_N "checking stack direction for C alloca... $ECHO_C" >&6
+if test "${ac_cv_c_stack_direction+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
- ac_cv_sizeof_int=4
+ ac_cv_c_stack_direction=0
else
- cat > conftest.$ac_ext <<EOF
-#line 4590 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+int
+find_stack_direction ()
{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(int));
- exit(0);
+ static char *addr = 0;
+ auto char dummy;
+ if (addr == 0)
+ {
+ addr = &dummy;
+ return find_stack_direction ();
+ }
+ else
+ return (&dummy > addr) ? 1 : -1;
}
-EOF
-if { (eval echo configure:4601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_int=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_int=0
-fi
-rm -fr conftest*
-fi
-
-fi
-echo "$ac_t""$ac_cv_sizeof_int" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_INT $ac_cv_sizeof_int
-EOF
-
-echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:4621: checking size of long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_sizeof_long=4
-else
- cat > conftest.$ac_ext <<EOF
-#line 4629 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
+int
+main ()
{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(long));
- exit(0);
+ exit (find_stack_direction () < 0);
}
-EOF
-if { (eval echo configure:4640: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_long=`cat conftestval`
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_c_stack_direction=1
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_long=0
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_c_stack_direction=-1
fi
-rm -fr conftest*
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
-
fi
-echo "$ac_t""$ac_cv_sizeof_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG $ac_cv_sizeof_long
-EOF
+echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5
+echo "${ECHO_T}$ac_cv_c_stack_direction" >&6
+
+cat >>confdefs.h <<_ACEOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+_ACEOF
+
+fi
-echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:4660: checking size of long long" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long_long'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+echo "$as_me:$LINENO: checking for working memcmp" >&5
+echo $ECHO_N "checking for working memcmp... $ECHO_C" >&6
+if test "${ac_cv_func_memcmp_working+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
- ac_cv_sizeof_long_long=0
-else
- cat > conftest.$ac_ext <<EOF
-#line 4668 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
+ ac_cv_func_memcmp_working=no
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(long long));
- exit(0);
+
+ /* Some versions of memcmp are not 8-bit clean. */
+ char c0 = 0x40, c1 = 0x80, c2 = 0x81;
+ if (memcmp(&c0, &c2, 1) >= 0 || memcmp(&c1, &c2, 1) >= 0)
+ exit (1);
+
+ /* The Next x86 OpenStep bug shows up only when comparing 16 bytes
+ or more and with at least one buffer not starting on a 4-byte boundary.
+ William Lewis provided this test program. */
+ {
+ char foo[21];
+ char bar[21];
+ int i;
+ for (i = 0; i < 4; i++)
+ {
+ char *a = foo + i;
+ char *b = bar + i;
+ strcpy (a, "--------01111111");
+ strcpy (b, "--------10000000");
+ if (memcmp (a, b, 16) >= 0)
+ exit (1);
+ }
+ exit (0);
+ }
+
+ ;
+ return 0;
}
-EOF
-if { (eval echo configure:4679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_long_long=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_long_long=0
-fi
-rm -fr conftest*
-fi
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_memcmp_working=yes
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_func_memcmp_working=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_memcmp_working" >&5
+echo "${ECHO_T}$ac_cv_func_memcmp_working" >&6
+test $ac_cv_func_memcmp_working = no && case $LIBOBJS in
+ "memcmp.$ac_objext" | \
+ *" memcmp.$ac_objext" | \
+ "memcmp.$ac_objext "* | \
+ *" memcmp.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS memcmp.$ac_objext" ;;
+esac
-fi
-echo "$ac_t""$ac_cv_sizeof_long_long" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
-EOF
-echo $ac_n "checking size of float""... $ac_c" 1>&6
-echo "configure:4699: checking size of float" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_float'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_sizeof_float=0
-else
- cat > conftest.$ac_ext <<EOF
-#line 4707 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
+for ac_func in vprintf
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(float));
- exit(0);
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
}
-EOF
-if { (eval echo configure:4718: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_float=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_float=0
-fi
-rm -fr conftest*
-fi
+#endif
-fi
-echo "$ac_t""$ac_cv_sizeof_float" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_FLOAT $ac_cv_sizeof_float
-EOF
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+echo "$as_me:$LINENO: checking for _doprnt" >&5
+echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6
+if test "${ac_cv_func__doprnt+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define _doprnt innocuous__doprnt
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char _doprnt (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
-echo $ac_n "checking size of double""... $ac_c" 1>&6
-echo "configure:4738: checking size of double" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_double'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_sizeof_double=8
-else
- cat > conftest.$ac_ext <<EOF
-#line 4746 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef _doprnt
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char _doprnt ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub__doprnt) || defined (__stub____doprnt)
+choke me
+#else
+char (*f) () = _doprnt;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(double));
- exit(0);
+return f != _doprnt;
+ ;
+ return 0;
}
-EOF
-if { (eval echo configure:4757: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_double=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_double=0
-fi
-rm -fr conftest*
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func__doprnt=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func__doprnt=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
+echo "${ECHO_T}$ac_cv_func__doprnt" >&6
+if test $ac_cv_func__doprnt = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_DOPRNT 1
+_ACEOF
+
fi
fi
-echo "$ac_t""$ac_cv_sizeof_double" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_DOUBLE $ac_cv_sizeof_double
-EOF
+done
+
+
-echo $ac_n "checking size of long double""... $ac_c" 1>&6
-echo "configure:4777: checking size of long double" >&5
-if eval "test \"`echo '$''{'ac_cv_sizeof_long_double'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_sizeof_long_double=0
-else
- cat > conftest.$ac_ext <<EOF
-#line 4785 "configure"
-#include "confdefs.h"
-#include <stdio.h>
-main()
+
+
+
+
+
+
+
+
+
+
+
+
+for ac_func in memmove memset stpcpy strpbrk strerror strtol strtoul \
+ memchr getline getdelim strcasecmp strncasecmp memmem \
+ strtok_r
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $ac_func
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
{
- FILE *f=fopen("conftestval", "w");
- if (!f) exit(1);
- fprintf(f, "%d\n", sizeof(long double));
- exit(0);
+return f != $ac_func;
+ ;
+ return 0;
}
-EOF
-if { (eval echo configure:4796: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_sizeof_long_double=`cat conftestval`
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_sizeof_long_double=0
-fi
-rm -fr conftest*
-fi
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+ case $LIBOBJS in
+ "$ac_func.$ac_objext" | \
+ *" $ac_func.$ac_objext" | \
+ "$ac_func.$ac_objext "* | \
+ *" $ac_func.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS $ac_func.$ac_objext" ;;
+esac
fi
-echo "$ac_t""$ac_cv_sizeof_long_double" 1>&6
-cat >> confdefs.h <<EOF
-#define SIZEOF_LONG_DOUBLE $ac_cv_sizeof_long_double
-EOF
+done
-cat >> confdefs.h <<\EOF
-#define FPREP FPREP_IEEE754
-EOF
-if test "$cross_compiling" = no; then
- echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:4825: checking whether byte ordering is bigendian" >&5
-if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_cv_c_bigendian=unknown
- # See if sys/param.h defines the BYTE_ORDER macro.
- cat > conftest.$ac_ext <<EOF
-#line 4832 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
- #include <sys/param.h>
-int main() {
-#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
- bogus endian macros
- #endif
-; return 0; }
-EOF
-if { (eval echo configure:4842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- # It does; now see whether it defined to BIG_ENDIAN or not.
- cat > conftest.$ac_ext <<EOF
-#line 4846 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
- #include <sys/param.h>
-int main() {
-#if BYTE_ORDER != BIG_ENDIAN
- not big endian
- #endif
-; return 0; }
-EOF
-if { (eval echo configure:4856: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- ac_cv_c_bigendian=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_c_bigendian=no
-fi
-rm -f conftest*
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
-fi
-rm -f conftest*
- if test $ac_cv_c_bigendian = unknown; then
- if test "$cross_compiling" = yes; then
- { echo "configure: error: Internal error determining endianness." 1>&2; exit 1; }
-else
- cat > conftest.$ac_ext <<EOF
-#line 4876 "configure"
-#include "confdefs.h"
-main () {
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long l;
- char c[sizeof (long)];
- } u;
- u.l = 1;
- exit (u.c[sizeof (long) - 1] == 1);
- }
-EOF
-if { (eval echo configure:4889: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_c_bigendian=no
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_c_bigendian=yes
-fi
-rm -fr conftest*
-fi
- fi
-fi
-echo "$ac_t""$ac_cv_c_bigendian" 1>&6
- if test "$ac_cv_c_bigendian" = yes; then
- cat >> confdefs.h <<\EOF
-#define ENDIAN BIG
-EOF
- elif test "$ac_cv_c_bigendian" = no; then
- cat >> confdefs.h <<\EOF
-#define ENDIAN LITTLE
-EOF
+for ac_func in gethostname strstr strtod __setfpucw isinf isnan finite \
+ getpid feholdexcept
+do
+as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_func" >&5
+echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6
+if eval "test \"\${$as_ac_var+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $ac_func innocuous_$ac_func
- else
- { echo "configure: error: Machine's endianness is unknown." 1>&2; exit 1; }
- fi
-else
- cat >> confdefs.h <<\EOF
-#define ENDIAN UNKNOWN
-EOF
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
- echo "configure: warning: Optionally set value for endianness for best performance." 1>&2
-fi
+#undef $ac_func
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+char (*f) () = $ac_func;
+#endif
+#ifdef __cplusplus
+}
+#endif
-echo $ac_n "checking if sprintf returns a char count""... $ac_c" 1>&6
-echo "configure:4930: checking if sprintf returns a char count" >&5
-if eval "test \"`echo '$''{'blp_is_sprintf_good'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- eval "blp_is_sprintf_good=no"
-else
- cat > conftest.$ac_ext <<EOF
-#line 4938 "configure"
-#include "confdefs.h"
-#include <stdio.h>
- int
- main()
- {
- char s[8];
- exit((int)sprintf(s, "abcdefg")!=7);
- }
-
-EOF
-if { (eval echo configure:4949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- eval "blp_is_sprintf_good=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- eval "blp_is_sprintf_good=no"
-fi
-rm -fr conftest*
-fi
+int
+main ()
+{
+return f != $ac_func;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_var=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_var=no"
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6
+if test `eval echo '${'$as_ac_var'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
-
fi
+done
-if test "$blp_is_sprintf_good" = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_GOOD_SPRINTF 1
-EOF
- echo "$ac_t""yes" 1>&6
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
else
- echo "$ac_t""no" 1>&6
+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
fi
-echo $ac_n "checking number of digits in LONG_MIN (incl. sign)""... $ac_c" 1>&6
-echo "configure:4976: checking number of digits in LONG_MIN (incl. sign)" >&5
-if eval "test \"`echo '$''{'blp_int_digits'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- eval "blp_int_digits=19"
-else
- cat > conftest.$ac_ext <<EOF
-#line 4984 "configure"
-#include "confdefs.h"
-#include <stdio.h>
- #include <limits.h>
- int
- main()
- {
- int len;
- char s[80];
- sprintf(s, "%ld", LONG_MAX);
- len = strlen(s);
- sprintf(s, "%ld", LONG_MIN);
- if(strlen(s)>len) len=strlen(s);
- sprintf(s, "%lu", ULONG_MAX);
- if(strlen(s)>len) len=strlen(s);
- exit(len);
- }
-
-EOF
-if { (eval echo configure:5003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- eval "blp_int_digits=19"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- eval "blp_int_digits=$?"
- if test "$blp_int_digits" -lt 11; then
- blp_int_digits=11
- fi
-fi
-rm -fr conftest*
+if test "$ac_cv_c_compiler_gnu" = yes; then
+ CFLAGS="-g -Wall -W -Wno-uninitialized -Wwrite-strings \
+-Wstrict-prototypes -Wpointer-arith -Wno-sign-compare"
+ if test "$CC_OPTIONS" != ""; then
+ CFLAGS="$CFLAGS $CC_OPTIONS"
+ fi
fi
-
-fi
-cat >> confdefs.h <<EOF
-#define INT_DIGITS $blp_int_digits
-EOF
-echo "$ac_t""$blp_int_digits" 1>&6
-echo $ac_n "checking random number generator""... $ac_c" 1>&6
-echo "configure:5029: checking random number generator" >&5
-if eval "test \"`echo '$''{'blp_random_good'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5034 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-int main() {
-int x=RAND_MAX;
-; return 0; }
-EOF
-if { (eval echo configure:5041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- rm -rf conftest*
- blp_random_good=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- blp_random_good=no
-fi
-rm -f conftest*
-fi
+ ac_config_files="$ac_config_files Makefile po/Makefile.in m4/Makefile intl/Makefile lib/Makefile lib/julcal/Makefile lib/misc/Makefile lib/dcdflib/Makefile doc/Makefile src/Makefile config/Makefile tests/Makefile"
-if test "$blp_random_good" = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_GOOD_RANDOM 1
-EOF
+ ac_config_commands="$ac_config_commands pref.h"
- echo "$ac_t""good" 1>&6
-else
- echo "$ac_t""bad" 1>&6
-fi
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+_ACEOF
-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments. Useless!
-echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5067: checking for working alloca.h" >&5
-if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5072 "configure"
-#include "confdefs.h"
-#include <alloca.h>
-int main() {
-char *p = alloca(2 * sizeof(int));
-; return 0; }
-EOF
-if { (eval echo configure:5079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_header_alloca_h=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_alloca_h=no
-fi
-rm -f conftest*
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
fi
+rm -f confcache
-echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
-if test $ac_cv_header_alloca_h = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA_H 1
-EOF
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
fi
-echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5100: checking for alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5105 "configure"
-#include "confdefs.h"
+DEFS=-DHAVE_CONFIG_H
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# ifdef _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-# else
-# if HAVE_ALLOCA_H
-# include <alloca.h>
-# else
-# ifdef _AIX
- #pragma alloca
-# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
-# endif
-# endif
-# endif
-# endif
-#endif
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
-int main() {
-char *p = (char *) alloca(1);
-; return 0; }
-EOF
-if { (eval echo configure:5133: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_cv_func_alloca_works=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_func_alloca_works=no
-fi
-rm -f conftest*
-fi
+LTLIBOBJS=$ac_ltlibobjs
-echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
-if test $ac_cv_func_alloca_works = yes; then
- cat >> confdefs.h <<\EOF
-#define HAVE_ALLOCA 1
-EOF
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
fi
-if test $ac_cv_func_alloca_works = no; then
- # The SVR3 libPW and SVR4 libucb both contain incompatible functions
- # that cause trouble. Some versions do not even contain alloca or
- # contain a buggy version. If you still want to use their alloca,
- # use ar to extract alloca.o from them instead of compiling alloca.c.
- ALLOCA=alloca.${ac_objext}
- cat >> confdefs.h <<\EOF
-#define C_ALLOCA 1
-EOF
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
-echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5165: checking whether alloca needs Cray hooks" >&5
-if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5170 "configure"
-#include "confdefs.h"
-#if defined(CRAY) && ! defined(CRAY2)
-webecray
-#else
-wenotbecray
-#endif
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "webecray" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_os_cray=yes
-else
- rm -rf conftest*
- ac_cv_os_cray=no
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
fi
-rm -f conftest*
+DUALCASE=1; export DUALCASE # for MKS sh
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
fi
-echo "$ac_t""$ac_cv_os_cray" 1>&6
-if test $ac_cv_os_cray = yes; then
-for ac_func in _getb67 GETB67 getb67; do
- echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5195: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5200 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
-int main() {
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
-; return 0; }
-EOF
-if { (eval echo configure:5223: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
+ as_expr=false
fi
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<EOF
-#define CRAY_STACKSEG_END $ac_func
-EOF
-
- break
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
else
- echo "$ac_t""no" 1>&6
+ as_basename=false
fi
-done
-fi
-echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5250: checking stack direction for C alloca" >&5
-if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_c_stack_direction=0
-else
- cat > conftest.$ac_ext <<EOF
-#line 5258 "configure"
-#include "confdefs.h"
-find_stack_direction ()
-{
- static char *addr = 0;
- auto char dummy;
- if (addr == 0)
- {
- addr = &dummy;
- return find_stack_direction ();
- }
- else
- return (&dummy > addr) ? 1 : -1;
-}
-main ()
-{
- exit (find_stack_direction() < 0);
-}
-EOF
-if { (eval echo configure:5277: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_c_stack_direction=1
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_c_stack_direction=-1
-fi
-rm -fr conftest*
-fi
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
-echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
-cat >> confdefs.h <<EOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-EOF
-fi
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
-echo $ac_n "checking for 8-bit clean memcmp""... $ac_c" 1>&6
-echo "configure:5299: checking for 8-bit clean memcmp" >&5
-if eval "test \"`echo '$''{'ac_cv_func_memcmp_clean'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_func_memcmp_clean=no
-else
- cat > conftest.$ac_ext <<EOF
-#line 5307 "configure"
-#include "confdefs.h"
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
-main()
-{
- char c0 = 0x40, c1 = 0x80, c2 = 0x81;
- exit(memcmp(&c0, &c2, 1) < 0 && memcmp(&c1, &c2, 1) < 0 ? 0 : 1);
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
}
-EOF
-if { (eval echo configure:5317: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- ac_cv_func_memcmp_clean=yes
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_func_memcmp_clean=no
+ as_expr=false
fi
-rm -fr conftest*
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
fi
+rm -f conf$$ conf$$.exe conf$$.file
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
fi
-echo "$ac_t""$ac_cv_func_memcmp_clean" 1>&6
-test $ac_cv_func_memcmp_clean = no && LIBOBJS="$LIBOBJS memcmp.${ac_objext}"
+as_executable_p="test -f"
-echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:5335: checking for vprintf" >&5
-if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5340 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char vprintf(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char vprintf();
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-int main() {
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_vprintf) || defined (__stub___vprintf)
-choke me
-#else
-vprintf();
-#endif
-; return 0; }
-EOF
-if { (eval echo configure:5363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_vprintf=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_vprintf=no"
-fi
-rm -f conftest*
-fi
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
-if eval "test \"`echo '$ac_cv_func_'vprintf`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_VPRINTF 1
-EOF
+# CDPATH.
+$as_unset CDPATH
-else
- echo "$ac_t""no" 1>&6
-fi
+exec 6>&1
-if test "$ac_cv_func_vprintf" != yes; then
-echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:5387: checking for _doprnt" >&5
-if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5392 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char _doprnt(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char _doprnt();
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
-int main() {
+This file was extended by pspp $as_me 0.3.1, which was
+generated by GNU Autoconf 2.58. Invocation command line was
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub__doprnt) || defined (__stub____doprnt)
-choke me
-#else
-_doprnt();
-#endif
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
-; return 0; }
-EOF
-if { (eval echo configure:5415: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func__doprnt=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func__doprnt=no"
-fi
-rm -f conftest*
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
fi
-if eval "test \"`echo '$ac_cv_func_'_doprnt`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- cat >> confdefs.h <<\EOF
-#define HAVE_DOPRNT 1
-EOF
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
-else
- echo "$ac_t""no" 1>&6
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
fi
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
fi
-for ac_func in memmove memset stpcpy strpbrk strerror strtol strtoul memchr \
- getline getdelim strcasecmp strncasecmp memmem strtok_r
-do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5443: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5448 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
+cat >>$CONFIG_STATUS <<\_ACEOF
-int main() {
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
+Usage: $0 [OPTIONS] [FILE]...
-; return 0; }
-EOF
-if { (eval echo configure:5471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"
-fi
-done
+Configuration files:
+$config_files
+Configuration headers:
+$config_headers
-for ac_func in gethostname strstr strtod __setfpucw isinf isnan finite getpid \
- feholdexcept
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@gnu.org>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+pspp config.status 0.3.1
+configured by $0, generated by GNU Autoconf 2.58,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
do
-echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5501: checking for $ac_func" >&5
-if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5506 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $ac_func(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char $ac_func();
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
-int main() {
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
-choke me
-#else
-$ac_func();
-#endif
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
-; return 0; }
-EOF
-if { (eval echo configure:5529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_$ac_func=no"
-fi
-rm -f conftest*
-fi
+ *) ac_config_targets="$ac_config_targets $1" ;;
-if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
- cat >> confdefs.h <<EOF
-#define $ac_tr_func 1
-EOF
-
-else
- echo "$ac_t""no" 1>&6
-fi
+ esac
+ shift
done
+ac_configure_extra_args=
-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:5555: checking whether ln -s works" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- rm -f conftestdata
-if ln -s X conftestdata 2>/dev/null
-then
- rm -f conftestdata
- ac_cv_prog_LN_S="ln -s"
-else
- ac_cv_prog_LN_S=ln
-fi
-fi
-LN_S="$ac_cv_prog_LN_S"
-if test "$ac_cv_prog_LN_S" = "ln -s"; then
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
fi
-
-if test "$ac_cv_prog_gcc" = yes; then
- CFLAGS="-g -Wall -W -Wno-uninitialized -Wwrite-strings \
--Wstrict-prototypes -Wpointer-arith"
- if test "$CC_OPTIONS" != ""; then
- CFLAGS="$CFLAGS $CC_OPTIONS"
- fi
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi
+_ACEOF
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
+cat >>$CONFIG_STATUS <<_ACEOF
#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
+# INIT-COMMANDS section.
#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
-fi
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it
+ # from automake.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-DEFS=-DHAVE_CONFIG_H
+_ACEOF
-# Without the "./", some shells look in PATH for config.status.
-: ${CONFIG_STATUS=./config.status}
-echo creating $CONFIG_STATUS
-rm -f $CONFIG_STATUS
-cat > $CONFIG_STATUS <<EOF
-#! /bin/sh
-# Generated automatically by configure.
-# Run this file to recreate the current configuration.
-# This directory was configured as follows,
-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-#
-# $0 $ac_configure_args
-#
-# Compiler output produced by configure, useful for debugging
-# configure, is in ./config.log if it exists.
-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
-for ac_option
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
do
- case "\$ac_option" in
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.13"
- exit 0 ;;
- -help | --help | --hel | --he | --h)
- echo "\$ac_cs_usage"; exit 0 ;;
- *) echo "\$ac_cs_usage"; exit 1 ;;
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+ "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
+ "intl/Makefile" ) CONFIG_FILES="$CONFIG_FILES intl/Makefile" ;;
+ "lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
+ "lib/julcal/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/julcal/Makefile" ;;
+ "lib/misc/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/misc/Makefile" ;;
+ "lib/dcdflib/Makefile" ) CONFIG_FILES="$CONFIG_FILES lib/dcdflib/Makefile" ;;
+ "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
+ "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "config/Makefile" ) CONFIG_FILES="$CONFIG_FILES config/Makefile" ;;
+ "tests/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
+ "pref.h" ) CONFIG_COMMANDS="$CONFIG_COMMANDS pref.h" ;;
+ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
esac
done
-ac_given_srcdir=$srcdir
-ac_given_INSTALL="$INSTALL"
-
-trap 'rm -fr `echo "Makefile \
- intl/Makefile \
- po/Makefile.in \
- lib/Makefile \
- lib/gmp/Makefile \
- lib/gmp/mpn/Makefile \
- lib/gmp/mpf/Makefile \
- lib/julcal/Makefile \
- lib/misc/Makefile \
- lib/dcdflib/Makefile \
- doc/Makefile \
- src/Makefile \
- config/Makefile \
- tests/Makefile config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-# Protect against being on the right side of a sed subst in config.status.
-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
-$ac_vpsub
-$extrasub
-s%@SHELL@%$SHELL%g
-s%@CFLAGS@%$CFLAGS%g
-s%@CPPFLAGS@%$CPPFLAGS%g
-s%@CXXFLAGS@%$CXXFLAGS%g
-s%@FFLAGS@%$FFLAGS%g
-s%@DEFS@%$DEFS%g
-s%@LDFLAGS@%$LDFLAGS%g
-s%@LIBS@%$LIBS%g
-s%@exec_prefix@%$exec_prefix%g
-s%@prefix@%$prefix%g
-s%@program_transform_name@%$program_transform_name%g
-s%@bindir@%$bindir%g
-s%@sbindir@%$sbindir%g
-s%@libexecdir@%$libexecdir%g
-s%@datadir@%$datadir%g
-s%@sysconfdir@%$sysconfdir%g
-s%@sharedstatedir@%$sharedstatedir%g
-s%@localstatedir@%$localstatedir%g
-s%@libdir@%$libdir%g
-s%@includedir@%$includedir%g
-s%@oldincludedir@%$oldincludedir%g
-s%@infodir@%$infodir%g
-s%@mandir@%$mandir%g
-s%@CC@%$CC%g
-s%@host@%$host%g
-s%@host_alias@%$host_alias%g
-s%@host_cpu@%$host_cpu%g
-s%@host_vendor@%$host_vendor%g
-s%@host_os@%$host_os%g
-s%@target@%$target%g
-s%@target_alias@%$target_alias%g
-s%@target_cpu@%$target_cpu%g
-s%@target_vendor@%$target_vendor%g
-s%@target_os@%$target_os%g
-s%@build@%$build%g
-s%@build_alias@%$build_alias%g
-s%@build_cpu@%$build_cpu%g
-s%@build_vendor@%$build_vendor%g
-s%@build_os@%$build_os%g
-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
-s%@INSTALL_DATA@%$INSTALL_DATA%g
-s%@PACKAGE@%$PACKAGE%g
-s%@VERSION@%$VERSION%g
-s%@ACLOCAL@%$ACLOCAL%g
-s%@AUTOCONF@%$AUTOCONF%g
-s%@AUTOMAKE@%$AUTOMAKE%g
-s%@AUTOHEADER@%$AUTOHEADER%g
-s%@MAKEINFO@%$MAKEINFO%g
-s%@SET_MAKE@%$SET_MAKE%g
-s%@RANLIB@%$RANLIB%g
-s%@CPP@%$CPP%g
-s%@ALLOCA@%$ALLOCA%g
-s%@USE_NLS@%$USE_NLS%g
-s%@MSGFMT@%$MSGFMT%g
-s%@GMSGFMT@%$GMSGFMT%g
-s%@XGETTEXT@%$XGETTEXT%g
-s%@GENCAT@%$GENCAT%g
-s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g
-s%@CATALOGS@%$CATALOGS%g
-s%@CATOBJEXT@%$CATOBJEXT%g
-s%@DATADIRNAME@%$DATADIRNAME%g
-s%@GMOFILES@%$GMOFILES%g
-s%@INSTOBJEXT@%$INSTOBJEXT%g
-s%@INTLDEPS@%$INTLDEPS%g
-s%@INTLLIBS@%$INTLLIBS%g
-s%@INTLOBJS@%$INTLOBJS%g
-s%@POFILES@%$POFILES%g
-s%@POSUB@%$POSUB%g
-s%@GT_NO@%$GT_NO%g
-s%@GT_YES@%$GT_YES%g
-s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g
-s%@l@%$l%g
-s%@LOCAL_CC@%$LOCAL_CC%g
-s%@GMP_SUBDIRS@%$GMP_SUBDIRS%g
-s%@GMP_LIBS@%$GMP_LIBS%g
-s%@U@%$U%g
-s%@ANSI2KNR@%$ANSI2KNR%g
-s%@LIBOBJS@%$LIBOBJS%g
-s%@LN_S@%$LN_S%g
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t
+s,@USE_NLS@,$USE_NLS,;t t
+s,@MSGFMT@,$MSGFMT,;t t
+s,@GMSGFMT@,$GMSGFMT,;t t
+s,@XGETTEXT@,$XGETTEXT,;t t
+s,@MSGMERGE@,$MSGMERGE,;t t
+s,@build@,$build,;t t
+s,@build_cpu@,$build_cpu,;t t
+s,@build_vendor@,$build_vendor,;t t
+s,@build_os@,$build_os,;t t
+s,@host@,$host,;t t
+s,@host_cpu@,$host_cpu,;t t
+s,@host_vendor@,$host_vendor,;t t
+s,@host_os@,$host_os,;t t
+s,@RANLIB@,$RANLIB,;t t
+s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+s,@CPP@,$CPP,;t t
+s,@EGREP@,$EGREP,;t t
+s,@ALLOCA@,$ALLOCA,;t t
+s,@GLIBC21@,$GLIBC21,;t t
+s,@LIBICONV@,$LIBICONV,;t t
+s,@LTLIBICONV@,$LTLIBICONV,;t t
+s,@INTLBISON@,$INTLBISON,;t t
+s,@BUILD_INCLUDED_LIBINTL@,$BUILD_INCLUDED_LIBINTL,;t t
+s,@USE_INCLUDED_LIBINTL@,$USE_INCLUDED_LIBINTL,;t t
+s,@CATOBJEXT@,$CATOBJEXT,;t t
+s,@DATADIRNAME@,$DATADIRNAME,;t t
+s,@INSTOBJEXT@,$INSTOBJEXT,;t t
+s,@GENCAT@,$GENCAT,;t t
+s,@INTLOBJS@,$INTLOBJS,;t t
+s,@INTL_LIBTOOL_SUFFIX_PREFIX@,$INTL_LIBTOOL_SUFFIX_PREFIX,;t t
+s,@INTLLIBS@,$INTLLIBS,;t t
+s,@LIBINTL@,$LIBINTL,;t t
+s,@LTLIBINTL@,$LTLIBINTL,;t t
+s,@POSUB@,$POSUB,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LN_S@,$LN_S,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
CEOF
-EOF
-
-cat >> $CONFIG_STATUS <<\EOF
-
-# Split the substitutions into bite-sized pieces for seds with
-# small command number limits, like on Digital OSF/1 and HP-UX.
-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
-ac_file=1 # Number of current file.
-ac_beg=1 # First line for current file.
-ac_end=$ac_max_sed_cmds # Line after last line for current file.
-ac_more_lines=:
-ac_sed_cmds=""
-while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
- else
- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
- fi
- if test ! -s conftest.s$ac_file; then
- ac_more_lines=false
- rm -f conftest.s$ac_file
- else
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f conftest.s$ac_file"
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
else
- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
fi
- ac_file=`expr $ac_file + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
fi
-done
-if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
-fi
-EOF
-
-cat >> $CONFIG_STATUS <<EOF
-
-CONFIG_FILES=\${CONFIG_FILES-"Makefile \
- intl/Makefile \
- po/Makefile.in \
- lib/Makefile \
- lib/gmp/Makefile \
- lib/gmp/mpn/Makefile \
- lib/gmp/mpf/Makefile \
- lib/julcal/Makefile \
- lib/misc/Makefile \
- lib/dcdflib/Makefile \
- doc/Makefile \
- src/Makefile \
- config/Makefile \
- tests/Makefile"}
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
esac
- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
-
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dir_suffix.
- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
else
- ac_dir_suffix= ac_dots=
- fi
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
- case "$ac_given_srcdir" in
- .) srcdir=.
- if test -z "$ac_dots"; then top_srcdir=.
- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
*) # Relative path.
- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
- top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
- case "$ac_given_INSTALL" in
- [/$]*) INSTALL="$ac_given_INSTALL" ;;
- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
- esac
- echo creating "$ac_file"
- rm -f "$ac_file"
- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
- case "$ac_file" in
- *Makefile*) ac_comsub="1i\\
-# $configure_input" ;;
- *) ac_comsub= ;;
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
esac
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- sed -e "$ac_comsub
-s%@configure_input@%$configure_input%g
-s%@srcdir@%$srcdir%g
-s%@top_srcdir@%$top_srcdir%g
-s%@INSTALL@%$INSTALL%g
-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
-fi; done
-rm -f conftest.s*
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_HEADER section.
+#
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
-ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
-ac_dC='\3'
-ac_dD='%g'
-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
-ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_uB='\([ ]\)%\1#\2define\3'
+ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+ac_dB='[ ].*$,\1#\2'
+ac_dC=' '
+ac_dD=',;t'
+# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+ac_uB='$,\1#\2define\3'
ac_uC=' '
-ac_uD='\4%g'
-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
-ac_eB='$%\1#\2define\3'
-ac_eC=' '
-ac_eD='%g'
-
-if test "${CONFIG_HEADERS+set}" != set; then
-EOF
-cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="config.h"
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-fi
-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
+ac_uD=',;t'
+
+for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- *) ac_file_in="${ac_file}.in" ;;
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
esac
- echo creating $ac_file
-
- rm -f conftest.frag conftest.in conftest.out
- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
- cat $ac_file_inputs > conftest.in
-
-EOF
-
-# Transform confdefs.h into a sed script conftest.vals that substitutes
-# the proper values into config.h.in to produce config.h. And first:
-# Protect against being on the right side of a sed subst in config.status.
-# Protect against being in an unquoted here document in config.status.
-rm -f conftest.vals
-cat > conftest.hdr <<\EOF
-s/[\\&%]/\\&/g
-s%[\\$`]%\\&%g
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
-s%ac_d%ac_u%gp
-s%ac_u%ac_e%gp
-EOF
-sed -n -f conftest.hdr confdefs.h > conftest.vals
-rm -f conftest.hdr
+ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ # Do quote $f, to prevent DOS paths from being IFS'd.
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+ # Remove the trailing spaces.
+ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
+
+_ACEOF
+
+# Transform confdefs.h into two sed scripts, `conftest.defines' and
+# `conftest.undefs', that substitutes the proper values into
+# config.h.in to produce config.h. The first handles `#define'
+# templates, and the second `#undef' templates.
+# And first: Protect against being on the right side of a sed subst in
+# config.status. Protect against being in an unquoted here document
+# in config.status.
+rm -f conftest.defines conftest.undefs
+# Using a here document instead of a string reduces the quoting nightmare.
+# Putting comments in sed scripts is not portable.
+#
+# `end' is used to avoid that the second main sed command (meant for
+# 0-ary CPP macros) applies to n-ary macro definitions.
+# See the Autoconf documentation for `clear'.
+cat >confdef2sed.sed <<\_ACEOF
+s/[\\&,]/\\&/g
+s,[\\$`],\\&,g
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
+t end
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
+: end
+_ACEOF
+# If some macros were called several times there might be several times
+# the same #defines, which is useless. Nevertheless, we may not want to
+# sort them, since we want the *last* AC-DEFINE to be honored.
+uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
+sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
+rm -f confdef2sed.sed
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
-cat >> conftest.vals <<\EOF
-s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
-EOF
-
-# Break up conftest.vals because some shells have a limit on
-# the size of here documents, and old seds have small limits too.
+cat >>conftest.undefs <<\_ACEOF
+s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
+_ACEOF
+
+# Break up conftest.defines because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
+echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
+echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
+echo ' :' >>$CONFIG_STATUS
+rm -f conftest.tail
+while grep . conftest.defines >/dev/null
+do
+ # Write a limited-size here document to $tmp/defines.sed.
+ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#define' lines.
+ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+ echo 'CEOF
+ sed -f $tmp/defines.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+ rm -f conftest.defines
+ mv conftest.tail conftest.defines
+done
+rm -f conftest.defines
+echo ' fi # grep' >>$CONFIG_STATUS
+echo >>$CONFIG_STATUS
+# Break up conftest.undefs because some shells have a limit on the size
+# of here documents, and old seds have small limits too (100 cmds).
+echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
rm -f conftest.tail
-while :
+while grep . conftest.undefs >/dev/null
do
- ac_lines=`grep -c . conftest.vals`
- # grep -c gives empty output for an empty file on some AIX systems.
- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
- # Write a limited-size here document to conftest.frag.
- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
+ # Write a limited-size here document to $tmp/undefs.sed.
+ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
+ # Speed up: don't consider the non `#undef'
+ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
+ # Work around the forget-to-reset-the-flag bug.
+ echo 't clr' >>$CONFIG_STATUS
+ echo ': clr' >>$CONFIG_STATUS
+ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
echo 'CEOF
- sed -f conftest.frag conftest.in > conftest.out
- rm -f conftest.in
- mv conftest.out conftest.in
-' >> $CONFIG_STATUS
- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
- rm -f conftest.vals
- mv conftest.tail conftest.vals
+ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
+ rm -f $tmp/in
+ mv $tmp/out $tmp/in
+' >>$CONFIG_STATUS
+ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
+ rm -f conftest.undefs
+ mv conftest.tail conftest.undefs
done
-rm -f conftest.vals
-
-cat >> $CONFIG_STATUS <<\EOF
- rm -f conftest.frag conftest.h
- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
- cat conftest.in >> conftest.h
- rm -f conftest.in
- if cmp -s $ac_file conftest.h 2>/dev/null; then
- echo "$ac_file is unchanged"
- rm -f conftest.h
+rm -f conftest.undefs
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ echo "/* Generated by configure. */" >$tmp/config.h
else
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
- # The file is in a subdirectory.
- test ! -d "$ac_dir" && mkdir "$ac_dir"
+ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
+ fi
+ cat $tmp/in >>$tmp/config.h
+ rm -f $tmp/in
+ if test x"$ac_file" != x-; then
+ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
+echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ rm -f $ac_file
+ mv $tmp/config.h $ac_file
fi
- rm -f $ac_file
- mv conftest.h $ac_file
+ else
+ cat $tmp/config.h
+ rm -f $tmp/config.h
fi
-fi; done
+# Compute $ac_file's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $ac_file | $ac_file:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X$ac_file : 'X\(//\)[^/]' \| \
+ X$ac_file : 'X\(//\)$' \| \
+ X$ac_file : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X$ac_file |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
-EOF
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_dest" : 'X\(//\)[^/]' \| \
+ X"$ac_dest" : 'X\(//\)$' \| \
+ X"$ac_dest" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
-cat >> $CONFIG_STATUS <<EOF
-ac_sources="$nls_cv_header_libgt"
-ac_dests="$nls_cv_header_intl"
-EOF
+ ac_builddir=.
-cat >> $CONFIG_STATUS <<\EOF
-srcdir=$ac_given_srcdir
-while test -n "$ac_sources"; do
- set $ac_dests; ac_dest=$1; shift; ac_dests=$*
- set $ac_sources; ac_source=$1; shift; ac_sources=$*
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
- echo "linking $srcdir/$ac_source to $ac_dest"
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
- if test ! -r $srcdir/$ac_source; then
- { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
- fi
- rm -f $ac_dest
-
- # Make relative symlinks.
- # Remove last slash and all that follows it. Not all systems have dirname.
- ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
- if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
- # The dest file is in a subdirectory.
- test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
- ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
- # A "../" for each directory in $ac_dest_dir_suffix.
- ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
- else
- ac_dest_dir_suffix= ac_dots=
- fi
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
- case "$srcdir" in
- [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
- *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
- esac
- # Make a symlink if possible; otherwise try a hard link.
- if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
- ln $srcdir/$ac_source $ac_dest; then :
+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+ case $ac_dest in
+ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
else
- { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+ continue
fi
-done
-EOF
-cat >> $CONFIG_STATUS <<EOF
-
-
-EOF
-cat >> $CONFIG_STATUS <<\EOF
-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
-sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
+ grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
+ # Extract the definition of DEP_FILES from the Makefile without
+ # running `make'.
+ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n -e '/^U = / s///p' < "$mf"`
+ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+ # We invoke sed twice because it is the simplest approach to
+ # changing $(DEPDIR) to its actual value in the expansion.
+ for file in `sed -n -e '
+ /^DEP_FILES = .*\\\\$/ {
+ s/^DEP_FILES = //
+ :loop
+ s/\\\\$//
+ p
+ n
+ /\\\\$/ b loop
+ p
+ }
+ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p $dirpart/$fdir
+ else
+ as_dir=$dirpart/$fdir
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+ default-1 )
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ GMOFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done ;;
+ pref.h )
# Copy pref.h from pref.h.orig if prudent
if test ! -f pref.h; then
echo "creating pref.h"
echo "pref.h exists"
fi
if test -f pref.h; then touch pref.h; fi
-
-exit 0
-EOF
+ ;;
+ esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
chmod +x $CONFIG_STATUS
-rm -fr confdefs* $ac_clean_files
-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
--- /dev/null
+dnl Process this file with autoconf to produce a configure script.
+
+dnl Initialize.
+AC_PREREQ(2.58)
+AC_INIT(pspp, 0.3.1)
+AC_CONFIG_HEADERS([config.h])
+AM_INIT_AUTOMAKE
+
+dnl Checks for programs.
+AC_GNU_SOURCE
+AC_PROG_CC
+
+dnl Internationalization macros.
+AM_GNU_GETTEXT
+AM_GNU_GETTEXT_VERSION dnl Prevents autoreconf complaint.
+
+dnl Checks for libraries.
+AC_CHECK_LIB(m, sin)
+AC_CHECK_LIB(gmp, mpf_get_str, [LIBS="-lgmp $LIBS"],
+ [AC_CHECK_LIB(gmp, __gmpf_get_str, [LIBS="-lgmp $LIBS"])])
+
+AC_CHECK_LIB(ncurses, tgetent, LIBS="-lncurses $LIBS" termcap=yes,
+ AC_CHECK_LIB(termcap, tgetent, LIBS="-ltermcap $LIBS" termcap=yes,
+ termcap=no))
+if test "$termcap" = yes; then
+ AC_CHECK_HEADERS(termcap.h)
+ AC_DEFINE(HAVE_LIBTERMCAP, 1,
+ [Define if you have the termcap library (-ltermcap).])
+fi
+
+AC_CHECK_LIB(readline, readline)
+if test "$ac_cv_lib_readline_readline" = yes; then
+ AC_CHECK_HEADERS(readline/readline.h)
+ AC_CHECK_LIB(readline, add_history, history=yes,
+ AC_CHECK_LIB(history, add_history, LIBS="-lhistory" history=yes,
+ history=no))
+ if test "$history" = yes; then
+ AC_CHECK_HEADERS(readline/history.h)
+ AC_DEFINE(HAVE_LIBHISTORY, 1,
+ [Define if you have the history library (-lhistory).])
+ fi
+fi
+
+dnl Checks for header files.
+AC_CHECK_HEADERS([limits.h memory.h sys/stat.h sys/time.h sys/types.h \
+ fpu_control.h sys/mman.h sys/wait.h ieeefp.h fenv.h])
+AC_HEADER_STAT
+AC_HEADER_STDC
+AC_HEADER_TIME
+
+AC_C_CONST
+AC_C_INLINE
+AC_TYPE_SIZE_T
+AC_STRUCT_TM
+
+AC_CHECK_SIZEOF(short, 2)
+AC_CHECK_SIZEOF(int, 4)
+AC_CHECK_SIZEOF(long, 4)
+AC_CHECK_SIZEOF(long long, 0)
+AC_CHECK_SIZEOF(float, 0)
+AC_CHECK_SIZEOF(double, 8)
+AC_CHECK_SIZEOF(long double, 0)
+
+AC_DEFINE(FPREP_IEEE754, 1,
+ [Define for machines that have IEEE 754 floating point arithmetic,
+ the most common format today.])
+
+AC_C_BIGENDIAN
+
+BLP_IS_SPRINTF_GOOD
+BLP_INT_DIGITS
+BLP_RANDOM
+
+AC_FUNC_ALLOCA
+AC_FUNC_MEMCMP
+AC_FUNC_VPRINTF
+AC_REPLACE_FUNCS([memmove memset stpcpy strpbrk strerror strtol strtoul \
+ memchr getline getdelim strcasecmp strncasecmp memmem \
+ strtok_r])
+AC_CHECK_FUNCS([gethostname strstr strtod __setfpucw isinf isnan finite \
+ getpid feholdexcept])
+
+AC_PROG_LN_S
+
+dnl This must be after other tests so warnings don't provoke errors above.
+if test "$ac_cv_c_compiler_gnu" = yes; then
+ CFLAGS="-g -Wall -W -Wno-uninitialized -Wwrite-strings \
+-Wstrict-prototypes -Wpointer-arith -Wno-sign-compare"
+ if test "$CC_OPTIONS" != ""; then
+ CFLAGS="$CFLAGS $CC_OPTIONS"
+ fi
+fi
+AC_SUBST(CFLAGS)
+
+AH_BOTTOM([#include <pref.h>])
+
+AC_CONFIG_FILES([Makefile po/Makefile.in m4/Makefile intl/Makefile
+ lib/Makefile lib/julcal/Makefile lib/misc/Makefile
+ lib/dcdflib/Makefile doc/Makefile src/Makefile
+ config/Makefile tests/Makefile])
+AC_CONFIG_COMMANDS([pref.h],[
+ # Copy pref.h from pref.h.orig if prudent
+ if test ! -f pref.h; then
+ echo "creating pref.h"
+ cp $ac_given_srcdir/pref.h.orig pref.h
+ elif test "`ls -t pref.h.orig pref.h 2>/dev/null | sed 1q`" = pref.h.orig; then
+ echo "replacing pref.h with newer pref.h.orig"
+ cp $ac_given_srcdir/pref.h.orig pref.h
+ else
+ echo "pref.h exists"
+ fi
+ if test -f pref.h; then touch pref.h; fi
+ ])
+AC_OUTPUT
+
+dnl configure.in ends here
+++ /dev/null
-dnl Process this file with autoconf to produce a configure script.
-AC_INIT(src/q2c.c)
-AC_PREREQ(2.12)
-AM_CONFIG_HEADER(config.h)
-CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE=1"
-AC_ISC_POSIX
-AC_PROG_CC
-AM_PROG_CC_STDC
-AC_CANONICAL_SYSTEM
-AM_INIT_AUTOMAKE(pspp, [0.3.0])
-
-#AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE")
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION")
-
-#GNU_PACKAGE="GNU $PACKAGE"
-#AC_DEFINE_UNQUOTED(GNU_PACKAGE, "$GNU_PACKAGE")
-
-ALL_LINGUAS=""
-
-AC_ARG_PROGRAM
-AC_PROG_INSTALL
-AC_PROG_RANLIB
-
-dnl internationalization macros
-AM_GNU_GETTEXT
-
-AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
-
-AC_ARG_WITH(checker,
- [ --with-checker compile with Checker (for debugging)],
- CC="checkergcc" LOCAL_CC="gcc" CC_OPTIONS="-Werror")
-AC_ARG_ENABLE(debugging,
- [ --enable-debugging turn on debugging options],
- CC_OPTIONS="-DDEBUGGING=1")
-
-# LOCAL_CC runs on the build system, targets the build system.
-# CC runs on the build system, targets the host system.
-if test -z "$LOCAL_CC"; then
- LOCAL_CC="$CC"
-fi
-AC_SUBST(LOCAL_CC)
-
-AC_CHECK_LIB(m, sin)
-AC_CHECK_LIB(gmp, mpf_get_str,
- LIBS="-lgmp $LIBS" GMP_SUBDIRS= GMP_LIBS=,
- GMP_SUBDIRS=gmp GMP_LIBS='$(GMP_LIBS)')
-AC_SUBST(GMP_SUBDIRS)
-AC_SUBST(GMP_LIBS)
-
-AC_CHECK_LIB(ncurses, tgetent, LIBS="-lncurses $LIBS" termcap=yes,
- AC_CHECK_LIB(termcap, tgetent, LIBS="-ltermcap $LIBS" termcap=yes,
- termcap=no))
-if test "$termcap" = yes; then
- AC_CHECK_HEADERS(termcap.h)
- AC_DEFINE(HAVE_LIBTERMCAP)
-fi
-
-AC_CHECK_LIB(readline, readline)
-if test "$ac_cv_lib_readline_readline" = yes; then
- AC_CHECK_HEADERS(readline/readline.h)
- AC_CHECK_LIB(readline, add_history, history=yes,
- AC_CHECK_LIB(history, add_history, LIBS="-lhistory" history=yes,
- history=no))
- if test "$history" = yes; then
- AC_CHECK_HEADERS(readline/history.h)
- AC_DEFINE(HAVE_LIBHISTORY)
- fi
-fi
-
-AC_CHECK_HEADERS(limits.h memory.h sys/stat.h sys/time.h sys/types.h \
- fpu_control.h sys/mman.h sys/wait.h ieeefp.h fenv.h)
-AC_HEADER_STAT
-AC_HEADER_STDC
-AC_HEADER_TIME
-
-dnl This test must precede tests of compiler characteristics like
-dnl that for the inline keyword, since it may change the degree to
-dnl which the compiler supports such features.
-AM_C_PROTOTYPES
-
-AC_C_CONST
-AC_C_INLINE
-AC_TYPE_SIZE_T
-AC_STRUCT_TM
-
-AC_CHECK_SIZEOF(short, 2)
-AC_CHECK_SIZEOF(int, 4)
-AC_CHECK_SIZEOF(long, 4)
-AC_CHECK_SIZEOF(long long, 0)
-AC_CHECK_SIZEOF(float, 0)
-AC_CHECK_SIZEOF(double, 8)
-AC_CHECK_SIZEOF(long double, 0)
-
-dnl There used to be a check for floating-point representation here, but
-dnl for some reason it didn't work on certain m68k GNU/Linux machines, and
-dnl I was unable to determine why. So, since every modern computer uses
-dnl ieee754 format anyway, I've hard-coded it to ieee754. Anyone who uses
-dnl something else can enumerate the exceptions.
-
-AC_DEFINE(FPREP, FPREP_IEEE754)
-
-dnl if test "$cross_compiling" = yes; then
-dnl AC_MSG_WARN([Edit config.h to set proper values for SIZEOF_SHORT, \
-dnl SIZEOF_INT,])
-dnl AC_MSG_WARN([SIZEOF_LONG, and SIZEOF_LONG_LONG (if available), if the \
-dnl values])
-dnl AC_MSG_WARN([are not 2, 4, 4, and 8, respectively.])
-dnl AC_MSG_WARN([Also set the floating point representation (IEEE754, etc.).])
-dnl else
-dnl AC_CACHE_CHECK(
-dnl floating point representation, ac_cv_sys_fprep,
-dnl
-dnl AC_TRY_RUN(
-dnl [changequote(<<, >>)dnl
-dnl <<
-dnl main () {
-dnl /* Test for IEEE754 floating point representation. */
-dnl union { unsigned char c[8]; double d; }
-dnl l = {{0x1c, 0xbc, 0x6e, 0xf2, 0x54, 0x8b, 0x11, 0x43}},
-dnl b = {{0x43, 0x11, 0x8b, 0x54, 0xf2, 0x6e, 0xbc, 0x1c}};
-dnl return l.d!=1234567891234567.0 && b.d!=1234567891234567.0;
-dnl }
-dnl >>
-dnl changequote([, ])dnl
-dnl ], ac_cv_sys_fprep=ieee754, ac_cv_sys_fprep=unknown,
-dnl AC_MSG_WARN([This error cannot occur.])))
-dnl if test "$ac_cv_sys_fprep" = ieee754; then
-dnl AC_DEFINE(FPREP, FPREP_IEEE754)
-dnl else
-dnl AC_MSG_WARN([Unknown floating-point representation. This is a serious \
-dnl error.])
-dnl AC_MSG_WARN([Please contact the author for porting information.])
-dnl AC_MSG_WARN([(It should be a fairly simple port, by the way.)])
-dnl AC_DEFINE(FPREP, FPREP_UNKNOWN)
-dnl fi
-dnl fi
-
-if test "$cross_compiling" = no; then
- dnl This code was taken from acspecific.m4 and modified.
- dnl It began life as AC_C_BIGENDIAN.
- AC_CACHE_CHECK(
- whether byte ordering is bigendian, ac_cv_c_bigendian,
- [ac_cv_c_bigendian=unknown
- # See if sys/param.h defines the BYTE_ORDER macro.
- AC_TRY_COMPILE(
- [#include <sys/types.h>
- #include <sys/param.h>],
- [#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
- bogus endian macros
- #endif],
- [# It does; now see whether it defined to BIG_ENDIAN or not.
- AC_TRY_COMPILE(
- [#include <sys/types.h>
- #include <sys/param.h>],
- [#if BYTE_ORDER != BIG_ENDIAN
- not big endian
- #endif],
- ac_cv_c_bigendian=yes, ac_cv_c_bigendian=no)])
- if test $ac_cv_c_bigendian = unknown; then
- AC_TRY_RUN(
- [main () {
- /* Are we little or big endian? From Harbison&Steele. */
- union
- {
- long l;
- char c[sizeof (long)];
- } u;
- u.l = 1;
- exit (u.c[sizeof (long) - 1] == 1);
- }],
- ac_cv_c_bigendian=no, ac_cv_c_bigendian=yes,
- AC_MSG_ERROR([Internal error determining endianness.]))
- fi])
-
- if test "$ac_cv_c_bigendian" = yes; then
- AC_DEFINE(ENDIAN, BIG)
- elif test "$ac_cv_c_bigendian" = no; then
- AC_DEFINE(ENDIAN, LITTLE)
- else
- AC_MSG_ERROR([Machine's endianness is unknown.])
- fi
-else
- AC_DEFINE(ENDIAN, UNKNOWN)
-
- AC_MSG_WARN([Optionally set value for endianness for best performance.])
-fi
-
-BLP_IS_SPRINTF_GOOD
-BLP_INT_DIGITS
-BLP_RANDOM
-
-AC_FUNC_ALLOCA
-AC_FUNC_MEMCMP
-AC_FUNC_VPRINTF
-AC_REPLACE_FUNCS(memmove memset stpcpy strpbrk strerror strtol strtoul memchr \
- getline getdelim strcasecmp strncasecmp memmem strtok_r)
-AC_CHECK_FUNCS(gethostname strstr strtod __setfpucw isinf isnan finite getpid \
- feholdexcept)
-
-AC_PROG_LN_S
-
-dnl This must be after other tests so warnings don't provoke errors above.
-if test "$ac_cv_prog_gcc" = yes; then
- CFLAGS="-g -Wall -W -Wno-uninitialized -Wwrite-strings \
--Wstrict-prototypes -Wpointer-arith"
- if test "$CC_OPTIONS" != ""; then
- CFLAGS="$CFLAGS $CC_OPTIONS"
- fi
-fi
-AC_SUBST(CFLAGS)
-
-AC_OUTPUT(Makefile \
- intl/Makefile \
- po/Makefile.in \
- lib/Makefile \
- lib/gmp/Makefile \
- lib/gmp/mpn/Makefile \
- lib/gmp/mpf/Makefile \
- lib/julcal/Makefile \
- lib/misc/Makefile \
- lib/dcdflib/Makefile \
- doc/Makefile \
- src/Makefile \
- config/Makefile \
- tests/Makefile,
- [sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
-
- # Copy pref.h from pref.h.orig if prudent
- if test ! -f pref.h; then
- echo "creating pref.h"
- cp $ac_given_srcdir/pref.h.orig pref.h
- elif test "`ls -t pref.h.orig pref.h 2>/dev/null | sed 1q`" = pref.h.orig; then
- echo "replacing pref.h with newer pref.h.orig"
- cp $ac_given_srcdir/pref.h.orig pref.h
- else
- echo "pref.h exists"
- fi
- if test -f pref.h; then touch pref.h; fi
- ])
-
-dnl configure.in ends here
--- /dev/null
+#! /bin/sh
+
+# depcomp - compile a program generating dependencies as side-effects
+# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+# `libtool' can also be set to `yes' or `no'.
+
+if test -z "$depfile"; then
+ base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+ dir=`echo "$object" | sed 's,/.*$,/,'`
+ if test "$dir" = "$object"; then
+ dir=
+ fi
+ # FIXME: should be _deps on DOS.
+ depfile="$dir.deps/$base"
+fi
+
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ tmpdepfile1="$dir.libs/$base.lo.d"
+ tmpdepfile2="$dir.libs/$base.d"
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1="$dir$base.o.d"
+ tmpdepfile2="$dir$base.d"
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile1"; then
+ tmpdepfile="$tmpdepfile1"
+ else
+ tmpdepfile="$tmpdepfile2"
+ fi
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
+@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_LIBS = @GMP_LIBS@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
-LOCAL_CC = @LOCAL_CC@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+
+# FIXME: remove this when the manual is fixed to eliminate dangling
+# references.
+MAKEINFO = makeinfo --no-validate
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
info_TEXINFOS = pspp.texi
-# FIXME: remove this when the manual is fixed to eliminate dangling
-# references.
-MAKEINFO = makeinfo --no-validate
-
EXTRA_DIST = pspp.man
MAINTAINERCLEANFILES = Makefile.in README.html
+subdir = doc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES =
-TEXI2DVI = texi2dvi
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+am__TEXINFO_TEX_DIR = $(srcdir)
INFO_DEPS = pspp.info
DVIS = pspp.dvi
+PDFS = pspp.pdf
+PSS = pspp.ps
TEXINFOS = pspp.texi
-DIST_COMMON = ChangeLog Makefile.am Makefile.in mdate-sh texinfo.tex
-
+DIST_COMMON = $(srcdir)/Makefile.in ChangeLog Makefile.am mdate-sh \
+ texinfo.tex
+all: all-am
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
.SUFFIXES:
-.SUFFIXES: .dvi .info .ps .texi .texinfo .txi
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-pspp.info: pspp.texi
-pspp.dvi: pspp.texi
-
-
-DVIPS = dvips
+.SUFFIXES: .dvi .info .pdf .ps .texi
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu doc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
.texi.info:
- @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
- cd $(srcdir) \
- && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
+ @rm -f $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]
+ $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+ -o $@ `test -f '$<' || echo '$(srcdir)/'`$<
.texi.dvi:
- TEXINPUTS=.:$$TEXINPUTS \
- MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.texi:
- @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
- cd $(srcdir) \
- && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.info:
- @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
- cd $(srcdir) \
- && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo:
- @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
- cd $(srcdir) \
- && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.texinfo.dvi:
- TEXINPUTS=.:$$TEXINPUTS \
- MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi.info:
- @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
- cd $(srcdir) \
- && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
-
-.txi.dvi:
- TEXINPUTS=.:$$TEXINPUTS \
- MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
-
-.txi:
- @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
- cd $(srcdir) \
- && $(MAKEINFO) `echo $< | sed 's,.*/,,'`
+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+ $(TEXI2DVI) `test -f '$<' || echo '$(srcdir)/'`$<
+
+.texi.pdf:
+ TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
+ $(TEXI2PDF) `test -f '$<' || echo '$(srcdir)/'`$<
+pspp.info: pspp.texi
+pspp.dvi: pspp.texi
+pspp.pdf: pspp.texi
+TEXI2DVI = texi2dvi
+
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+DVIPS = dvips
.dvi.ps:
- $(DVIPS) $< -o $@
+ $(DVIPS) -o $@ $<
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(infodir)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- d=$(srcdir); \
- for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
- if test -f $$d/$$ifile; then \
- echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
- $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
- else : ; fi; \
- done; \
- done
- @$(POST_INSTALL)
- @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
+uninstall-info-am:
+ $(PRE_UNINSTALL)
+ @if (install-info --version && \
+ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
- echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
- install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile"; \
+ install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$relfile; \
done; \
- else : ; fi
-
-uninstall-info:
- $(PRE_UNINSTALL)
- @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
- ii=yes; \
- else ii=; fi; \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- test -z "$ii" \
- || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
- done
+ else :; fi
@$(NORMAL_UNINSTALL)
- list='$(INFO_DEPS)'; \
+ @list='$(INFO_DEPS)'; \
for file in $$list; do \
- (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if cd $(DESTDIR)$(infodir); then \
+ echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+ else :; fi); \
done
dist-info: $(INFO_DEPS)
list='$(INFO_DEPS)'; \
for base in $$list; do \
- d=$(srcdir); \
- for file in `cd $$d && eval echo $$base*`; do \
- test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file; \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ for file in $$d/$$base*; do \
+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+ test -f $(distdir)/$$relfile || \
+ cp -p $$file $(distdir)/$$relfile; \
done; \
done
mostlyclean-aminfo:
- -rm -f pspp.aux pspp.cp pspp.cps pspp.dvi pspp.fn pspp.fns pspp.ky \
- pspp.kys pspp.ps pspp.log pspp.pg pspp.toc pspp.tp pspp.tps \
- pspp.vr pspp.vrs pspp.op pspp.tr pspp.cv pspp.cn
-
-clean-aminfo:
-
-distclean-aminfo:
+ -rm -f pspp.aux pspp.cp pspp.cps pspp.fn pspp.fns pspp.ky pspp.kys pspp.log \
+ pspp.pg pspp.pgs pspp.tmp pspp.toc pspp.tp pspp.tps pspp.vr \
+ pspp.vrs pspp.dvi pspp.pdf pspp.ps
maintainer-clean-aminfo:
- cd $(srcdir) && for i in $(INFO_DEPS); do \
- rm -f $$i; \
- if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
- rm -f $$i-[0-9]*; \
- fi; \
+ @list='$(INFO_DEPS)'; for i in $$list; do \
+ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
tags: TAGS
TAGS:
+ctags: CTAGS
+CTAGS:
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-subdir = doc
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
- $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
-info-am: $(INFO_DEPS)
-info: info-am
-dvi-am: $(DVIS)
-dvi: dvi-am
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-info
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(INFO_DEPS)
-install-data-am: install-info-am
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(infodir)
+install: install-am
+install-exec: install-exec-am
install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-info
-uninstall: uninstall-am
-all-am: Makefile $(INFO_DEPS)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(infodir)
-
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-generic mostlyclean-am
-clean-am: clean-aminfo clean-generic mostlyclean-am
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
-clean: clean-am
+dvi: dvi-am
-distclean-am: distclean-aminfo distclean-generic clean-am
+dvi-am: $(DVIS)
-distclean: distclean-am
+info: info-am
-maintainer-clean-am: maintainer-clean-aminfo maintainer-clean-generic \
- distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am: $(INFO_DEPS)
+
+install-data-am: install-info-am
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-info-am: $(INFO_DEPS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(infodir)
+ @list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+ if test -f $$ifile; then \
+ relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
+ echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
+ $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
+ else : ; fi; \
+ done; \
+ done
+ @$(POST_INSTALL)
+ @if (install-info --version && \
+ install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile";\
+ install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$relfile || :;\
+ done; \
+ else : ; fi
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+ maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am: $(PDFS)
+
+ps: ps-am
+
+ps-am: $(PSS)
-.PHONY: install-info-am uninstall-info mostlyclean-aminfo \
-distclean-aminfo clean-aminfo maintainer-clean-aminfo tags distdir \
-info-am info dvi-am dvi check check-am installcheck-am installcheck \
-install-exec-am install-exec install-data-am install-data install-am \
-install uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+uninstall-am: uninstall-info-am
+.PHONY: all all-am check check-am clean clean-generic dist-info \
+ distclean distclean-generic distdir dvi dvi-am info info-am \
+ install install-am install-data install-data-am install-exec \
+ install-exec-am install-info install-info-am install-man \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-aminfo \
+ maintainer-clean-generic mostlyclean mostlyclean-aminfo \
+ mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
-%% TeX macros to handle texinfo files
-
-% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 1994 Free Software Foundation, Inc.
-
-%This texinfo.tex file is free software; you can redistribute it and/or
-%modify it under the terms of the GNU General Public License as
-%published by the Free Software Foundation; either version 2, or (at
-%your option) any later version.
-
-%This texinfo.tex file is distributed in the hope that it will be
-%useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-%of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-%General Public License for more details.
-
-%You should have received a copy of the GNU General Public License
-%along with this texinfo.tex file; see the file COPYING. If not, write
-%to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
-%USA.
-
-
-%In other words, you are welcome to use, share and improve this program.
-%You are forbidden to forbid anyone else to use, share and improve
-%what you give them. Help stamp out software-hoarding!
-
-
-% Send bug reports to bug-texinfo@prep.ai.mit.edu.
-% Please include a *precise* test case in each bug report.
-
-
-% Make it possible to create a .fmt file just by loading this file:
-% if the underlying format is not loaded, start by loading it now.
-% Added by gildea November 1993.
+% texinfo.tex -- TeX macros to handle Texinfo files.
+%
+% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2003-10-06.08}
+%
+% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+%
+% This texinfo.tex file is free software; you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation; either version 2, or (at
+% your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this texinfo.tex file; see the file COPYING. If not, write
+% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+% Boston, MA 02111-1307, USA.
+%
+% In other words, you are welcome to use, share and improve this program.
+% You are forbidden to forbid anyone else to use, share and improve
+% what you give them. Help stamp out software-hoarding!
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+% ftp://ftp.gnu.org/gnu/texinfo/texinfo.tex
+% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
+% ftp://tug.org/tex/texinfo.tex
+% (and all CTAN mirrors, see http://www.ctan.org),
+% and /home/gd/gnu/doc/texinfo.tex on the GNU machines.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+%
+% The texinfo.tex in any given Texinfo distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org. Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem. Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution. For a simple
+% manual foo.texi, however, you can get away with this:
+% tex foo.texi
+% texindex foo.??
+% tex foo.texi
+% tex foo.texi
+% dvips foo.dvi -o # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent. You can get the existing language-specific files from the
+% full Texinfo distribution.
-% This automatically updates the version number based on RCS.
-\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
-\deftexinfoversion$Revision: 1.2 $
-\message{Loading texinfo package [Version \texinfoversion]:}
+\message{Loading texinfo [version \texinfoversion]:}
% If in a .fmt file, print the version number
% and turn on active characters that we couldn't do earlier because
% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}\message{}
+\everyjob{\message{[Texinfo version \texinfoversion]}%
\catcode`+=\active \catcode`\_=\active}
-% Save some parts of plain tex whose names we will redefine.
+\message{Basics,}
+\chardef\other=12
-\let\ptextilde=\~
-\let\ptexlbrace=\{
-\let\ptexrbrace=\}
-\let\ptexdots=\dots
-\let\ptexdot=\.
-\let\ptexstar=\*
-\let\ptexend=\end
-\let\ptexbullet=\bullet
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
\let\ptexb=\b
+\let\ptexbullet=\bullet
\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexgtr=>
+\let\ptexhat=^
\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexnoindent=\noindent
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexplus=+
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexstar=\*
\let\ptext=\t
-\let\ptexl=\l
-\let\ptexL=\L
-
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- \gdef\tie{\leavevmode\penalty\@M\ }
-}
-\let\~ = \tie % And make it available as @~.
-
-\message{Basics,}
-\chardef\other=12
% If this character appears in an error message or help string, it
% starts a new line in the output.
\newlinechar = `^^J
-% Set up fixed words for English.
-\ifx\putwordChapter\undefined{\gdef\putwordChapter{Chapter}}\fi%
-\def\putwordInfo{Info}%
-\ifx\putwordSee\undefined{\gdef\putwordSee{See}}\fi%
-\ifx\putwordsee\undefined{\gdef\putwordsee{see}}\fi%
-\ifx\putwordfile\undefined{\gdef\putwordfile{file}}\fi%
-\ifx\putwordpage\undefined{\gdef\putwordpage{page}}\fi%
-\ifx\putwordsection\undefined{\gdef\putwordsection{section}}\fi%
-\ifx\putwordSection\undefined{\gdef\putwordSection{Section}}\fi%
-\ifx\putwordTableofContents\undefined{\gdef\putwordTableofContents{Table of Contents}}\fi%
-\ifx\putwordShortContents\undefined{\gdef\putwordShortContents{Short Contents}}\fi%
-\ifx\putwordAppendix\undefined{\gdef\putwordAppendix{Appendix}}\fi%
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
+\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeftypevar\undefined\gdef\putwordDeftypevar{Variable}\fi
+\ifx\putwordDeffunc\undefined \gdef\putwordDeffunc{Function}\fi
+\ifx\putwordDeftypefun\undefined\gdef\putwordDeftypefun{Function}\fi
+
+% In some macros, we cannot use the `\? notation---the left quote is
+% in some cases the escape char.
+\chardef\colonChar = `\:
+\chardef\commaChar = `\,
+\chardef\dotChar = `\.
+\chardef\equalChar = `\=
+\chardef\exclamChar= `\!
+\chardef\questChar = `\?
+\chardef\semiChar = `\;
+\chardef\spaceChar = `\ %
+\chardef\underChar = `\_
% Ignore a token.
%
\def\gobble#1{}
+% True if #1 is the empty string, i.e., called like `\ifempty{}'.
+%
+\def\ifempty#1{\ifemptyx #1\emptymarkA\emptymarkB}%
+\def\ifemptyx#1#2\emptymarkB{\ifx #1\emptymarkA}%
+
+% Hyphenation fixes.
\hyphenation{ap-pen-dix}
-\hyphenation{mini-buf-fer mini-buf-fers}
\hyphenation{eshell}
+\hyphenation{mini-buf-fer mini-buf-fers}
+\hyphenation{time-stamp}
+\hyphenation{white-space}
% Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset \bindingoffset=0pt
-\newdimen \normaloffset \normaloffset=\hoffset
+\newdimen\bindingoffset
+\newdimen\normaloffset
\newdimen\pagewidth \newdimen\pageheight
-\pagewidth=\hsize \pageheight=\vsize
% Sometimes it is convenient to have everything in the transcript file
% and nothing on the terminal. We don't just call \tracingall here,
-% since that produces some useless output on the terminal.
+% since that produces some useless output on the terminal. We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
%
\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\def\loggingall{\tracingcommands2 \tracingstats2
- \tracingpages1 \tracingoutput1 \tracinglostchars1
- \tracingmacros2 \tracingparagraphs1 \tracingrestores1
- \showboxbreadth\maxdimen\showboxdepth\maxdimen
+\def\loggingall{%
+ \tracingstats2
+ \tracingpages1
+ \tracinglostchars2 % 2 gives us more in etex
+ \tracingparagraphs1
+ \tracingoutput1
+ \tracingmacros2
+ \tracingrestores1
+ \showboxbreadth\maxdimen \showboxdepth\maxdimen
+ \ifx\eTeXversion\undefined\else % etex gives us more logging
+ \tracingscantokens1
+ \tracingifs1
+ \tracinggroups1
+ \tracingnesting2
+ \tracingassigns1
+ \fi
+ \tracingcommands3 % 3 gives us more in etex
+ \errorcontextlines\maxdimen
}%
-%---------------------Begin change-----------------------
+% add check for \lastpenalty to plain's definitions. If the last thing
+% we did was a \nobreak, we don't want to insert more space.
%
-%%%% For @cropmarks command.
-% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+ \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+ \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+ \removelastskip\penalty-200\bigskip\fi\fi}
+
+% For @cropmarks command.
+% Do @cropmarks to get crop marks.
%
-\newdimen\cornerlong \newdimen\cornerthick
-\newdimen \topandbottommargin
-\newdimen \outerhsize \newdimen \outervsize
-\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
-\outerhsize=7in
-%\outervsize=9.5in
-% Alternative @smallbook page size is 9.25in
-\outervsize=9.25in
-\topandbottommargin=.75in
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
%
-%---------------------End change-----------------------
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
+%
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions itself, but you have to call it yourself.
-\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}}
-\def\onepageout#1{\hoffset=\normaloffset
-\ifodd\pageno \advance\hoffset by \bindingoffset
-\else \advance\hoffset by -\bindingoffset\fi
-{\escapechar=`\\\relax % makes sure backslash is used in output files.
-\shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}%
-{\let\hsize=\pagewidth \makefootline}}}%
-\advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
-
-%%%% For @cropmarks command %%%%
-
-% Here is a modification of the main output routine for Near East Publications
-% This provides right-angle cropmarks at all four corners.
-% The contents of the page are centerlined into the cropmarks,
-% and any desired binding offset is added as an \hskip on either
-% site of the centerlined box. (P. A. MacKay, 12 November, 1986)
-%
-\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up
-{\escapechar=`\\\relax % makes sure backslash is used in output files.
- \shipout
- \vbox to \outervsize{\hsize=\outerhsize
- \vbox{\line{\ewtop\hfill\ewtop}}
- \nointerlineskip
- \line{\vbox{\moveleft\cornerthick\nstop}
- \hfill
- \vbox{\moveright\cornerthick\nstop}}
- \vskip \topandbottommargin
- \centerline{\ifodd\pageno\hskip\bindingoffset\fi
- \vbox{
- {\let\hsize=\pagewidth \makeheadline}
- \pagebody{#1}
- {\let\hsize=\pagewidth \makefootline}}
- \ifodd\pageno\else\hskip\bindingoffset\fi}
- \vskip \topandbottommargin plus1fill minus1fill
- \boxmaxdepth\cornerthick
- \line{\vbox{\moveleft\cornerthick\nsbot}
- \hfill
- \vbox{\moveright\cornerthick\nsbot}}
- \nointerlineskip
- \vbox{\line{\ewbot\hfill\ewbot}}
- }}
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+ \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+ %
+ \ifodd\pageno \advance\hoffset by \bindingoffset
+ \else \advance\hoffset by -\bindingoffset\fi
+ %
+ % Do this outside of the \shipout so @code etc. will be expanded in
+ % the headline as they should be, not taken literally (outputting ''code).
+ \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+ \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+ %
+ {%
+ % Have to do this stuff outside the \shipout because we want it to
+ % take effect in \write's, yet the group defined by the \vbox ends
+ % before the \shipout runs.
+ %
+ \escapechar = `\\ % use backslash in output files.
+ \indexdummies % don't expand commands in the output.
+ \normalturnoffactive % \ in index entries must not stay \, e.g., if
+ % the page break happens to be in the middle of an example.
+ \shipout\vbox{%
+ % Do this early so pdf references go to the beginning of the page.
+ \ifpdfmakepagedest \pdfmkdest{\the\pageno}\fi
+ %
+ \ifcropmarks \vbox to \outervsize\bgroup
+ \hsize = \outerhsize
+ \vskip-\topandbottommargin
+ \vtop to0pt{%
+ \line{\ewtop\hfil\ewtop}%
+ \nointerlineskip
+ \line{%
+ \vbox{\moveleft\cornerthick\nstop}%
+ \hfill
+ \vbox{\moveright\cornerthick\nstop}%
+ }%
+ \vss}%
+ \vskip\topandbottommargin
+ \line\bgroup
+ \hfil % center the page within the outer (page) hsize.
+ \ifodd\pageno\hskip\bindingoffset\fi
+ \vbox\bgroup
+ \fi
+ %
+ \unvbox\headlinebox
+ \pagebody{#1}%
+ \ifdim\ht\footlinebox > 0pt
+ % Only leave this space if the footline is nonempty.
+ % (We lessened \vsize for it in \oddfootingxxx.)
+ % The \baselineskip=24pt in plain's \makefootline has no effect.
+ \vskip 2\baselineskip
+ \unvbox\footlinebox
+ \fi
+ %
+ \ifcropmarks
+ \egroup % end of \vbox\bgroup
+ \hfil\egroup % end of (centering) \line\bgroup
+ \vskip\topandbottommargin plus1fill minus1fill
+ \boxmaxdepth = \cornerthick
+ \vbox to0pt{\vss
+ \line{%
+ \vbox{\moveleft\cornerthick\nsbot}%
+ \hfill
+ \vbox{\moveright\cornerthick\nsbot}%
+ }%
+ \nointerlineskip
+ \line{\ewbot\hfil\ewbot}%
+ }%
+ \egroup % \vbox from first cropmarks clause
+ \fi
+ }% end of \shipout\vbox
+ }% end of group with \normalturnoffactive
\advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi}
-%
-% Do @cropmarks to get crop marks
-\def\cropmarks{\let\onepageout=\croppageout }
+ \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
\newinsert\margin \dimen\margin=\maxdimen
\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
}
-%
% Here are the rules for the cropmarks. Note that they are
% offset so that the space between them is truly \outerhsize or \outervsize
% (P. A. MacKay, 12 November, 1986)
%% Call \inENV within environments (after a \begingroup)
\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
\def\ENVcheck{%
-\ifENV\errmessage{Still within an environment. Type Return to continue.}
+\ifENV\errmessage{Still within an environment; press RETURN to continue}
\endgroup\fi} % This is not perfect, but it should reduce lossage
% @begin foo is the same as @foo, for now.
-\newhelp\EMsimple{Type <Return> to continue.}
+\newhelp\EMsimple{Press RETURN to continue.}
\outer\def\begin{\parsearg\beginxxx}
}
-% Single-spacing is done by various environments (specifically, in
-% \nonfillstart and \quotations).
-\newskip\singlespaceskip \singlespaceskip = 12.5pt
-\def\singlespace{%
- % Why was this kern here? It messes up equalizing space above and below
- % environments. --karl, 6may93
- %{\advance \baselineskip by -\singlespaceskip
- %\kern \baselineskip}%
- \setleading \singlespaceskip
-}
-
%% Simple single-character @ commands
% @@ prints an @
% Kludge this until the fonts are right (grr).
-\def\@{{\tt \char '100}}
+\def\@{{\tt\char64}}
% This is turned off because it was never documented
% and you can use @w{...} around a quote to suppress ligatures.
%\def\'{{'}}
% Used to generate quoted braces.
-
-\def\mylbrace {{\tt \char '173}}
-\def\myrbrace {{\tt \char '175}}
+\def\mylbrace {{\tt\char123}}
+\def\myrbrace {{\tt\char125}}
\let\{=\mylbrace
\let\}=\myrbrace
+\begingroup
+ % Definitions to produce \{ and \} commands for indices,
+ % and @{ and @} for the aux file.
+ \catcode`\{ = \other \catcode`\} = \other
+ \catcode`\[ = 1 \catcode`\] = 2
+ \catcode`\! = 0 \catcode`\\ = \other
+ !gdef!lbracecmd[\{]%
+ !gdef!rbracecmd[\}]%
+ !gdef!lbraceatcmd[@{]%
+ !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \c
+\let\dotaccent = \.
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \t
+\let\ubaraccent = \b
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+ \def\temp{#1}%
+ \ifx\temp\imacro \ptexi
+ \else\ifx\temp\jmacro \j
+ \else \errmessage{@dotless can be used only with i or j}%
+ \fi\fi
+}
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
% @: forces normal size whitespace following.
\def\:{\spacefactor=1000 }
% @* forces a line break.
\def\*{\hfil\break\hbox{}\ignorespaces}
+% @/ allows a line break.
+\let\/=\allowbreak
+
% @. is an end-of-sentence period.
\def\.{.\spacefactor=3000 }
-% @enddots{} is an end-of-sentence ellipsis.
-\gdef\enddots{$\mathinner{\ldotp\ldotp\ldotp\ldotp}$\spacefactor=3000}
-
% @! is an end-of-sentence bang.
-\gdef\!{!\spacefactor=3000 }
+\def\!{!\spacefactor=3000 }
% @? is an end-of-sentence query.
-\gdef\?{?\spacefactor=3000 }
+\def\?{?\spacefactor=3000 }
% @w prevents a word break. Without the \leavevmode, @w at the
% beginning of a paragraph, when TeX is still in vertical mode, would
% therefore, no glue is inserted, and the space between the headline and
% the text is small, which looks bad.
%
+% Another complication is that the group might be very large. This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material. In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom. The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
\def\group{\begingroup
\ifnum\catcode13=\active \else
\errhelp = \groupinvalidhelp
% above. But it's pretty close.
\def\Egroup{%
\egroup % End the \vtop.
+ % \dimen0 is the vertical size of the group's box.
+ \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
+ % \dimen2 is how much space is left on the page (more or less).
+ \dimen2 = \pageheight \advance\dimen2 by -\pagetotal
+ % if the group doesn't fit on the current page, and it's a big big
+ % group, force a page break.
+ \ifdim \dimen0 > \dimen2
+ \ifdim \pagetotal < \vfilllimit\pageheight
+ \page
+ \fi
+ \fi
+ \copy\groupbox
\endgroup % End the \group.
}%
%
- \vtop\bgroup
+ \setbox\groupbox = \vtop\bgroup
% We have to put a strut on the last line in case the @group is in
% the midst of an example, rather than completely enclosing it.
% Otherwise, the interline space between the last line of the group
%% This method tries to make TeX break the page naturally
%% if the depth of the box does not fit.
%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000
+%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
%\prevdepth=-1000pt
%}}
\def\needx#1{%
- % Go into vertical mode, so we don't make a big box in the middle of a
+ % Ensure vertical mode, so we don't make a big box in the middle of a
% paragraph.
\par
%
- % Don't add any leading before our big empty box, but allow a page
- % break, since the best break might be right here.
- \allowbreak
- \nointerlineskip
- \vtop to #1\mil{\vfil}%
- %
- % TeX does not even consider page breaks if a penalty added to the
- % main vertical list is 10000 or more. But in order to see if the
- % empty box we just added fits on the page, we must make it consider
- % page breaks. On the other hand, we don't want to actually break the
- % page after the empty box. So we use a penalty of 9999.
- %
- % There is an extremely small chance that TeX will actually break the
- % page at this \penalty, if there are no other feasible breakpoints in
- % sight. (If the user is using lots of big @group commands, which
- % almost-but-not-quite fill up a page, TeX will have a hard time doing
- % good page breaking, for example.) However, I could not construct an
- % example where a page broke at this \penalty; if it happens in a real
- % document, then we can reconsider our strategy.
- \penalty9999
- %
- % Back up by the size of the box, whether we did a page break or not.
- \kern -#1\mil
- %
- % Do not allow a page break right after this kern.
- \nobreak
+ % If the @need value is less than one line space, it's useless.
+ \dimen0 = #1\mil
+ \dimen2 = \ht\strutbox
+ \advance\dimen2 by \dp\strutbox
+ \ifdim\dimen0 > \dimen2
+ %
+ % Do a \strut just to make the height of this box be normal, so the
+ % normal leading is inserted relative to the preceding line.
+ % And a page break here is fine.
+ \vtop to #1\mil{\strut\vfil}%
+ %
+ % TeX does not even consider page breaks if a penalty added to the
+ % main vertical list is 10000 or more. But in order to see if the
+ % empty box we just added fits on the page, we must make it consider
+ % page breaks. On the other hand, we don't want to actually break the
+ % page after the empty box. So we use a penalty of 9999.
+ %
+ % There is an extremely small chance that TeX will actually break the
+ % page at this \penalty, if there are no other feasible breakpoints in
+ % sight. (If the user is using lots of big @group commands, which
+ % almost-but-not-quite fill up a page, TeX will have a hard time doing
+ % good page breaking, for example.) However, I could not construct an
+ % example where a page broke at this \penalty; if it happens in a real
+ % document, then we can reconsider our strategy.
+ \penalty9999
+ %
+ % Back up by the size of the box, whether we did a page break or not.
+ \kern -#1\mil
+ %
+ % Do not allow a page break right after this kern.
+ \nobreak
+ \fi
}
% @br forces paragraph break
\let\br = \par
-% @dots{} output some dots
-
-\def\dots{$\ldots$}
+% @dots{} output an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in a typewriter
+% font as three actual period characters.
+%
+\def\dots{%
+ \leavevmode
+ \hbox to 1.5em{%
+ \hskip 0pt plus 0.25fil minus 0.25fil
+ .\hss.\hss.%
+ \hskip 0pt plus 0.5fil minus 0.5fil
+ }%
+}
-% @page forces the start of a new page
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+ \leavevmode
+ \hbox to 2em{%
+ \hskip 0pt plus 0.25fil minus 0.25fil
+ .\hss.\hss.\hss.%
+ \hskip 0pt plus 0.5fil minus 0.5fil
+ }%
+ \spacefactor=3000
+}
+% @page forces the start of a new page.
+%
\def\page{\par\vfill\supereject}
% @exdent text....
\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
\leftline{\hskip\leftskip{\rm#1}}}}
-%\hbox{{\rm#1}}\hfil\break}}
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph. For more general purposes, use the \margin insertion
+% class. WHICH is `l' or `r'.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+ \nobreak
+ \kern-\strutdepth
+ \vtop to \strutdepth{%
+ \baselineskip=\strutdepth
+ \vss
+ % if you have multiple lines of stuff to put here, you'll need to
+ % make the vbox yourself of the appropriate size.
+ \ifx#1l%
+ \llap{\ignorespaces #2\hskip\inmarginspacing}%
+ \else
+ \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+ \fi
+ \null
+ }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \def\lefttext{#1}% have both texts
+ \def\righttext{#2}%
+ \else
+ \def\lefttext{#1}% have only one text
+ \def\righttext{#1}%
+ \fi
+ %
+ \ifodd\pageno
+ \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+ \else
+ \def\temp{\inleftmargin\lefttext}%
+ \fi
+ \temp
+}
% @include file insert text of that file as input.
-
-\def\include{\parsearg\includezzz}
-%Use \input\thisfile to avoid blank after \input, which may be an active
-%char (in which case the blank would become the \input argument).
-%The grouping keeps the value of \thisfile correct even when @include
-%is nested.
-\def\includezzz #1{\begingroup
-\def\thisfile{#1}\input\thisfile
+% Allow normal characters that we make active in the argument (a file name).
+\def\include{\begingroup
+ \catcode`\\=\other
+ \catcode`~=\other
+ \catcode`^=\other
+ \catcode`_=\other
+ \catcode`|=\other
+ \catcode`<=\other
+ \catcode`>=\other
+ \catcode`+=\other
+ \parsearg\includezzz}
+% Restore active chars for included file.
+\def\includezzz#1{\endgroup\begingroup
+ % Read the included file in a group so nested @include's work.
+ \def\thisfile{#1}%
+ \let\value=\expandablevalue
+ \input\thisfile
\endgroup}
\def\thisfile{}
-% @center line outputs that line, centered
-
-\def\center{\parsearg\centerzzz}
-\def\centerzzz #1{{\advance\hsize by -\leftskip
-\advance\hsize by -\rightskip
-\centerline{#1}}}
+% @center line
+% outputs that line, centered.
+%
+\def\center{\parsearg\docenter}
+\def\docenter#1{{%
+ \ifhmode \hfil\break \fi
+ \advance\hsize by -\leftskip
+ \advance\hsize by -\rightskip
+ \line{\hfil \ignorespaces#1\unskip \hfil}%
+ \ifhmode \break \fi
+}}
% @sp n outputs n lines of vertical space
\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\par \vskip #1\baselineskip}
+\def\spxxx #1{\vskip #1\baselineskip}
% @comment ...line which is ignored...
% @c is the same as @comment
% @ignore ... @end ignore is another way to write a comment
-\def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other%
-\parsearg \commentxxx}
-
-\def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 }
+\def\comment{\begingroup \catcode`\^^M=\other%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\commentxxx}
+{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
\let\c=\comment
-% Prevent errors for section commands.
-% Used in @ignore and in failing conditionals.
-\def\ignoresections{%
-\let\chapter=\relax
-\let\unnumbered=\relax
-\let\top=\relax
-\let\unnumberedsec=\relax
-\let\unnumberedsection=\relax
-\let\unnumberedsubsec=\relax
-\let\unnumberedsubsection=\relax
-\let\unnumberedsubsubsec=\relax
-\let\unnumberedsubsubsection=\relax
-\let\section=\relax
-\let\subsec=\relax
-\let\subsubsec=\relax
-\let\subsection=\relax
-\let\subsubsection=\relax
-\let\appendix=\relax
-\let\appendixsec=\relax
-\let\appendixsection=\relax
-\let\appendixsubsec=\relax
-\let\appendixsubsection=\relax
-\let\appendixsubsubsec=\relax
-\let\appendixsubsubsection=\relax
-\let\contents=\relax
-\let\smallbook=\relax
-\let\titlepage=\relax
-}
-
-% Used in nested conditionals, where we have to parse the Texinfo source
-% and so want to turn off most commands, in case they are used
-% incorrectly.
-%
-\def\ignoremorecommands{%
- \let\defcv = \relax
- \let\deffn = \relax
- \let\deffnx = \relax
- \let\defindex = \relax
- \let\defivar = \relax
- \let\defmac = \relax
- \let\defmethod = \relax
- \let\defop = \relax
- \let\defopt = \relax
- \let\defspec = \relax
- \let\deftp = \relax
- \let\deftypefn = \relax
- \let\deftypefun = \relax
- \let\deftypevar = \relax
- \let\deftypevr = \relax
- \let\defun = \relax
- \let\defvar = \relax
- \let\defvr = \relax
- \let\ref = \relax
- \let\xref = \relax
- \let\printindex = \relax
- \let\pxref = \relax
- \let\settitle = \relax
- \let\include = \relax
- \let\lowersections = \relax
- \let\down = \relax
- \let\raisesections = \relax
- \let\up = \relax
- \let\set = \relax
- \let\clear = \relax
- \let\item = \relax
- \let\message = \relax
-}
-
-% Ignore @ignore ... @end ignore.
-%
-\def\ignore{\doignore{ignore}}
-
-% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text.
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
%
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\html{\doignore{html}}
-\def\menu{\doignore{menu}}
-\def\direntry{\doignore{direntry}}
-
-% Ignore text until a line `@end #1'.
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
%
-\def\doignore#1{\begingroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define a command to swallow text until we reach `@end #1'.
- \long\def\doignoretext##1\end #1{\enddoignore}%
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \catcode32 = 10
- %
- % And now expand that command.
- \doignoretext
-}
-
-% What we do to finish off ignored text.
-%
-\def\enddoignore{\endgroup\ignorespaces}%
-
-\newif\ifwarnedobs\warnedobsfalse
-\def\obstexwarn{%
- \ifwarnedobs\relax\else
- % We need to warn folks that they may have trouble with TeX 3.0.
- % This uses \immediate\write16 rather than \message to get newlines.
- \immediate\write16{}
- \immediate\write16{***WARNING*** for users of Unix TeX 3.0!}
- \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
- \immediate\write16{If you are running another version of TeX, relax.}
- \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
- \immediate\write16{ Then upgrade your TeX installation if you can.}
- \immediate\write16{If you are stuck with version 3.0, run the}
- \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
- \immediate\write16{ to use a workaround.}
- \immediate\write16{}
- \warnedobstrue
+\def\paragraphindent{\parsearg\doparagraphindent}
+\def\doparagraphindent#1{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \defaultparindent = 0pt
+ \else
+ \defaultparindent = #1em
\fi
+ \fi
+ \parindent = \defaultparindent
}
-% **In TeX 3.0, setting text in \nullfont hangs tex. For a
-% workaround (which requires the file ``dummy.tfm'' to be installed),
-% uncomment the following line:
-%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
-
-% Ignore text, except that we keep track of conditional commands for
-% purposes of nesting, up to an `@end #1' command.
-%
-\def\nestedignore#1{%
- \obstexwarn
- % We must actually expand the ignored text to look for the @end
- % command, so that nested ignore constructs work. Thus, we put the
- % text into a \vbox and then do nothing with the result. To minimize
- % the change of memory overflow, we follow the approach outlined on
- % page 401 of the TeXbook: make the current font be a dummy font.
- %
- \setbox0 = \vbox\bgroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define `@end #1' to end the box, which will in turn undefine the
- % @end command again.
- \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
- %
- % We are going to be parsing Texinfo commands. Most cause no
- % trouble when they are used incorrectly, but some commands do
- % complicated argument parsing or otherwise get confused, so we
- % undefine them.
- %
- % We can't do anything about stray @-signs, unfortunately;
- % they'll produce `undefined control sequence' errors.
- \ignoremorecommands
- %
- % Set the current font to be \nullfont, a TeX primitive, and define
- % all the font commands to also use \nullfont. We don't use
- % dummy.tfm, as suggested in the TeXbook, because not all sites
- % might have that installed. Therefore, math mode will still
- % produce output, but that should be an extremely small amount of
- % stuff compared to the main input.
- %
- \nullfont
- \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont
- \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont
- \let\tensf = \nullfont
- % Similarly for index fonts (mostly for their use in
- % smallexample)
- \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont
- \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont
- \let\indsf = \nullfont
- %
- % Don't complain when characters are missing from the fonts.
- \tracinglostchars = 0
- %
- % Don't bother to do space factor calculations.
- \frenchspacing
- %
- % Don't report underfull hboxes.
- \hbadness = 10000
- %
- % Do minimal line-breaking.
- \pretolerance = 10000
- %
- % Do not execute instructions in @tex
- \def\tex{\doignore{tex}}
-}
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it.
-%
-\def\set{\parsearg\setxxx}
-\def\setxxx#1{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- \def\temp{#2}%
- \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
- \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\def\exampleindent{\parsearg\doexampleindent}
+\def\doexampleindent#1{%
+ \def\temp{#1}%
+ \ifx\temp\asisword
+ \else
+ \ifx\temp\noneword
+ \lispnarrowing = 0pt
+ \else
+ \lispnarrowing = #1em
+ \fi
\fi
}
-% Can't use \xdef to pre-expand #2 and save some time, since \temp or
-% \next or other control sequences that we've defined might get us into
-% an infinite loop. Consider `@set foo @cite{bar}'.
-\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
-% @clear VAR clears (i.e., unsets) the variable VAR.
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading. If WORD is `insert', then do indent at such
+% paragraphs.
%
-\def\clear{\parsearg\clearxxx}
-\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-
-% @value{foo} gets the text saved in variable foo.
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
%
-\def\value#1{\expandafter
- \ifx\csname SET#1\endcsname\relax
- {\{No value for ``#1''\}}
- \else \csname SET#1\endcsname \fi}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\newdimen\currentparindent
%
-\def\ifset{\parsearg\ifsetxxx}
-\def\ifsetxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifsetfail
- \else
- \expandafter\ifsetsucceed
- \fi
-}
-\def\ifsetsucceed{\conditionalsucceed{ifset}}
-\def\ifsetfail{\nestedignore{ifset}}
-\defineunmatchedend{ifset}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
+\def\insertword{insert}
%
-\def\ifclear{\parsearg\ifclearxxx}
-\def\ifclearxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifclearsucceed
+\def\firstparagraphindent{\parsearg\dofirstparagraphindent}
+\def\dofirstparagraphindent#1{%
+ \def\temp{#1}%
+ \ifx\temp\noneword
+ \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+ \else\ifx\temp\insertword
+ \let\suppressfirstparagraphindent = \relax
\else
- \expandafter\ifclearfail
- \fi
+ \errhelp = \EMsimple
+ \errmessage{Unknown @firstparagraphindent option `\temp'}%
+ \fi\fi
}
-\def\ifclearsucceed{\conditionalsucceed{ifclear}}
-\def\ifclearfail{\nestedignore{ifclear}}
-\defineunmatchedend{ifclear}
-% @iftex always succeeds; we read the text following, through @end
-% iftex). But `@end iftex' should be valid only after an @iftex.
+% Here is how we actually suppress indentation. Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
%
-\def\iftex{\conditionalsucceed{iftex}}
-\defineunmatchedend{iftex}
-
-% We can't just want to start a group at @iftex (for example) and end it
-% at @end iftex, since then @set commands inside the conditional have no
-% effect (they'd get reverted at the end of the group). So we must
-% define \Eiftex to redefine itself to be its previous value. (We can't
-% just define it to fail again with an ``unmatched end'' error, since
-% the @ifset might be nested.)
+% We also make \indent itself not actually do anything until the next
+% paragraph.
%
-\def\conditionalsucceed#1{%
- \edef\temp{%
- % Remember the current value of \E#1.
- \let\nece{prevE#1} = \nece{E#1}%
- %
- % At the `@end #1', redefine \E#1 to be its previous value.
- \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
+\gdef\dosuppressfirstparagraphindent{%
+ \gdef\indent{%
+ \restorefirstparagraphindent
+ \indent
+ }%
+ \gdef\noindent{%
+ \restorefirstparagraphindent
+ \noindent
+ }%
+ \global\everypar = {%
+ \kern -\parindent
+ \restorefirstparagraphindent
}%
- \temp
}
-% We need to expand lots of \csname's, but we don't want to expand the
-% control sequences after we've constructed them.
-%
-\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
+\gdef\restorefirstparagraphindent{%
+ \global \let \indent = \ptexindent
+ \global \let \noindent = \ptexnoindent
+ \global \everypar = {}%
+}
+
% @asis just yields its argument. Used with @table, for example.
%
\def\asis#1{#1}
-% @math means output in math mode.
-% We don't use $'s directly in the definition of \math because control
-% sequences like \math are expanded when the toc file is written. Then,
-% we read the toc file back, the $'s will be normal characters (as they
-% should be, according to the definition of Texinfo). So we must use a
-% control sequence to switch into and out of math mode.
+% @math outputs its argument in math mode.
+% We don't use $'s directly in the definition of \math because we need
+% to set catcodes according to plain TeX first, to allow for subscripts,
+% superscripts, special math chars, etc.
+%
+\let\implicitmath = $%$ font-lock fix
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}. So make
+% _ within @math be active (mathcode "8000), and distinguish by seeing
+% if the current family is \slfam, which is what @var uses.
+%
+{\catcode\underChar = \active
+\gdef\mathunderscore{%
+ \catcode\underChar=\active
+ \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+}}
+%
+% Another complication: we want \\ (and @\) to output a \ character.
+% FYI, plain.tex uses \\ as a temporary control sequence (why?), but
+% this is not advertised and we don't care. Texinfo does not
+% otherwise define @\.
%
-% This isn't quite enough for @math to work properly in indices, but it
-% seems unlikely it will ever be needed there.
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+ \tex
+ \mathcode`\_="8000 \mathunderscore
+ \let\\ = \mathbackslash
+ \mathactive
+ \implicitmath\finishmath}
+\def\finishmath#1{#1\implicitmath\Etex}
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an
+% argument to a command which set the catcodes (such as @item or @section).
%
-\let\implicitmath = $
-\def\math#1{\implicitmath #1\implicitmath}
+{
+ \catcode`^ = \active
+ \catcode`< = \active
+ \catcode`> = \active
+ \catcode`+ = \active
+ \gdef\mathactive{%
+ \let^ = \ptexhat
+ \let< = \ptexless
+ \let> = \ptexgtr
+ \let+ = \ptexplus
+ }
+}
% @bullet and @minus need the same treatment as @math, just above.
\def\bullet{\implicitmath\ptexbullet\implicitmath}
\def\minus{\implicitmath-\implicitmath}
-\def\node{\ENVcheck\parsearg\nodezzz}
-\def\nodezzz#1{\nodexxx [#1,]}
-\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
-\let\nwnode=\node
-\let\lastnode=\relax
-
-\def\donoderef{\ifx\lastnode\relax\else
-\expandafter\expandafter\expandafter\setref{\lastnode}\fi
-\global\let\lastnode=\relax}
-
-\def\unnumbnoderef{\ifx\lastnode\relax\else
-\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi
-\global\let\lastnode=\relax}
-
-\def\appendixnoderef{\ifx\lastnode\relax\else
-\expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi
-\global\let\lastnode=\relax}
-
+% @refill is a no-op.
\let\refill=\relax
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
% @setfilename is done at the beginning of every texinfo file.
% So open here the files we need to have open while reading the input.
% This makes it possible to make a .fmt file for texinfo.
\def\setfilename{%
- \readauxfile
- \opencontents
+ \iflinks
+ \readauxfile
+ \fi % \openindices needs to do some work in any case.
\openindices
\fixbackslash % Turn off hack to swallow `\input texinfo'.
\global\let\setfilename=\comment % Ignore extra @setfilename cmds.
+ %
+ % If texinfo.cnf is present on the system, read it.
+ % Useful for site-wide @afourpaper, etc.
+ % Just to be on the safe side, close the input stream before the \input.
+ \openin 1 texinfo.cnf
+ \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
+ \closein1
+ \temp
+ %
\comment % Ignore the actual filename.
}
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
+% Called from \setfilename.
+%
+\def\openindices{%
+ \newindex{cp}%
+ \newcodeindex{fn}%
+ \newcodeindex{vr}%
+ \newcodeindex{tp}%
+ \newcodeindex{ky}%
+ \newcodeindex{pg}%
+}
-\message{fonts,}
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-% Font-change commands.
-% Texinfo supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf analogous to plain's \rm, etc.
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+\ifx\pdfoutput\undefined
+ \pdffalse
+ \let\pdfmkdest = \gobble
+ \let\pdfurl = \gobble
+ \let\endlink = \relax
+ \let\linkcolor = \relax
+ \let\pdfmakeoutlines = \relax
+\else
+ \pdftrue
+ \pdfoutput = 1
+ \input pdfcolor
+ \pdfcatalog{/PageMode /UseOutlines}%
+ \def\dopdfimage#1#2#3{%
+ \def\imagewidth{#2}%
+ \def\imageheight{#3}%
+ % without \immediate, pdftex seg faults when the same image is
+ % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.)
+ \ifnum\pdftexversion < 14
+ \immediate\pdfimage
+ \else
+ \immediate\pdfximage
+ \fi
+ \ifx\empty\imagewidth\else width \imagewidth \fi
+ \ifx\empty\imageheight\else height \imageheight \fi
+ \ifnum\pdftexversion<13
+ #1.pdf%
+ \else
+ {#1.pdf}%
+ \fi
+ \ifnum\pdftexversion < 14 \else
+ \pdfrefximage \pdflastximage
+ \fi}
+ \def\pdfmkdest#1{{\normalturnoffactive \pdfdest name{#1} xyz}}
+ \def\pdfmkpgn#1{#1}
+ \let\linkcolor = \Blue % was Cyan, but that seems light?
+ \def\endlink{\Black\pdfendlink}
+ % Adding outlines to PDF; macros for calculating structure of outlines
+ % come from Petr Olsak
+ \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+ \else \csname#1\endcsname \fi}
+ \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+ \advance\tempnum by 1
+ \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+ %
+ % #1 is the section text. #2 is the pdf expression for the number
+ % of subentries (or empty, for subsubsections). #3 is the node
+ % text, which might be empty if this toc entry had no
+ % corresponding node. #4 is the page number.
+ %
+ \def\dopdfoutline#1#2#3#4{%
+ % Generate a link to the node text if that exists; else, use the
+ % page number. We could generate a destination for the section
+ % text in the case where a section has no node, but it doesn't
+ % seem worthwhile, since most documents are normally structured.
+ \def\pdfoutlinedest{#3}%
+ \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}\fi
+ %
+ \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{#1}%
+ }
+ %
+ \def\pdfmakeoutlines{%
+ \openin 1 \jobname.toc
+ \ifeof 1\else\begingroup
+ \closein 1
+ % Thanh's hack / proper braces in bookmarks
+ \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
+ \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
+ %
+ % Read toc silently, to get counts of subentries for \pdfoutline.
+ \def\numchapentry##1##2##3##4{\def\thischapnum{##2}}%
+ \def\numsecentry##1##2##3##4{%
+ \def\thissecnum{##2}%
+ \advancenumber{chap\thischapnum}}%
+ \def\numsubsecentry##1##2##3##4{%
+ \def\thissubsecnum{##2}%
+ \advancenumber{sec\thissecnum}}%
+ \def\numsubsubsecentry##1##2##3##4{\advancenumber{subsec\thissubsecnum}}%
+ %
+ % use \def rather than \let here because we redefine \chapentry et
+ % al. a second time, below.
+ \def\appentry{\numchapentry}%
+ \def\appsecentry{\numsecentry}%
+ \def\appsubsecentry{\numsubsecentry}%
+ \def\appsubsubsecentry{\numsubsubsecentry}%
+ \def\unnchapentry{\numchapentry}%
+ \def\unnsecentry{\numsecentry}%
+ \def\unnsubsecentry{\numsubsecentry}%
+ \def\unnsubsubsecentry{\numsubsubsecentry}%
+ \input \jobname.toc
+ %
+ % Read toc second time, this time actually producing the outlines.
+ % The `-' means take the \expnumber as the absolute number of
+ % subentries, which we calculated on our first read of the .toc above.
+ %
+ % We use the node names as the destinations.
+ \def\numchapentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+ \def\numsecentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+ \def\numsubsecentry##1##2##3##4{%
+ \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+ \def\numsubsubsecentry##1##2##3##4{% count is always zero
+ \dopdfoutline{##1}{}{##3}{##4}}%
+ %
+ % Make special characters normal for writing to the pdf file.
+ \indexnofonts
+ \turnoffactive
+ \input \jobname.toc
+ \endgroup\fi
+ }
+ %
+ \def\makelinks #1,{%
+ \def\params{#1}\def\E{END}%
+ \ifx\params\E
+ \let\nextmakelinks=\relax
+ \else
+ \let\nextmakelinks=\makelinks
+ \ifnum\lnkcount>0,\fi
+ \picknum{#1}%
+ \startlink attr{/Border [0 0 0]}
+ goto name{\pdfmkpgn{\the\pgn}}%
+ \linkcolor #1%
+ \advance\lnkcount by 1%
+ \endlink
+ \fi
+ \nextmakelinks
+ }
+ \def\picknum#1{\expandafter\pn#1}
+ \def\pn#1{%
+ \def\p{#1}%
+ \ifx\p\lbrace
+ \let\nextpn=\ppn
+ \else
+ \let\nextpn=\ppnn
+ \def\first{#1}
+ \fi
+ \nextpn
+ }
+ \def\ppn#1{\pgn=#1\gobble}
+ \def\ppnn{\pgn=\first}
+ \def\pdfmklnk#1{\lnkcount=0\makelinks #1,END,}
+ \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+ \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+ \ifx\PP\D\let\nextsp\relax
+ \else\let\nextsp\skipspaces
+ \ifx\p\space\else\addtokens{\filename}{\PP}%
+ \advance\filenamelength by 1
+ \fi
+ \fi
+ \nextsp}
+ \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+ \ifnum\pdftexversion < 14
+ \let \startlink \pdfannotlink
+ \else
+ \let \startlink \pdfstartlink
+ \fi
+ \def\pdfurl#1{%
+ \begingroup
+ \normalturnoffactive\def\@{@}%
+ \let\value=\expandablevalue
+ \leavevmode\Red
+ \startlink attr{/Border [0 0 0]}%
+ user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+ % #1
+ \endgroup}
+ \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+ \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+ \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+ \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+ \def\maketoks{%
+ \expandafter\poptoks\the\toksA|ENDTOKS|
+ \ifx\first0\adn0
+ \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+ \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+ \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+ \else
+ \ifnum0=\countA\else\makelink\fi
+ \ifx\first.\let\next=\done\else
+ \let\next=\maketoks
+ \addtokens{\toksB}{\the\toksD}
+ \ifx\first,\addtokens{\toksB}{\space}\fi
+ \fi
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+ \next}
+ \def\makelink{\addtokens{\toksB}%
+ {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+ \def\pdflink#1{%
+ \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+ \linkcolor #1\endlink}
+ \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\fi % \ifx\pdfoutput
+
+
+\message{fonts,}
+% Font-change commands.
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf analogous to plain's \rm, etc.
\newfam\sffam
\def\sf{\fam=\sffam \tensf}
\let\li = \sf % Sometimes we call it \li, not \sf.
-%% Try out Computer Modern fonts at \magstephalf
-\let\mainmagstep=\magstephalf
+% We don't need math for this one.
+\def\ttsl{\tenttsl}
+
+% Default leading.
+\newdimen\textleading \textleading = 13.2pt
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly. There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+\def\setleading#1{%
+ \normalbaselineskip = #1\relax
+ \normallineskip = \lineskipfactor\normalbaselineskip
+ \normalbaselines
+ \setbox\strutbox =\hbox{%
+ \vrule width0pt height\strutheightpercent\baselineskip
+ depth \strutdepthpercent \baselineskip
+ }%
+}
% Set the font macro #1 to the font named #2, adding on the
% specified font prefix (normally `cm').
-\def\setfont#1#2{\font#1=\fontprefix#2}
+% #3 is the font's design size, #4 is a scale factor
+\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
% Use cm as the default font prefix.
% To specify the font prefix, you must define \fontprefix
\ifx\fontprefix\undefined
\def\fontprefix{cm}
\fi
-
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx} %where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+\newcount\mainmagstep
\ifx\bigger\relax
-\let\mainmagstep=\magstep1
-\setfont\textrm{r12}
-\setfont\texttt{tt12}
+ % not really supported.
+ \mainmagstep=\magstep1
+ \setfont\textrm\rmshape{12}{1000}
+ \setfont\texttt\ttshape{12}{1000}
\else
-\setfont\textrm{r10 scaled \mainmagstep}
-\setfont\texttt{tt10 scaled \mainmagstep}
+ \mainmagstep=\magstephalf
+ \setfont\textrm\rmshape{10}{\mainmagstep}
+ \setfont\texttt\ttshape{10}{\mainmagstep}
\fi
-% Instead of cmb10, you many want to use cmbx10.
+% Instead of cmb10, you may want to use cmbx10.
% cmbx10 is a prettier font on its own, but cmb10
-% looks better when embedded in a line with cmr10.
-\setfont\textbf{b10 scaled \mainmagstep}
-\setfont\textit{ti10 scaled \mainmagstep}
-\setfont\textsl{sl10 scaled \mainmagstep}
-\setfont\textsf{ss10 scaled \mainmagstep}
-\setfont\textsc{csc10 scaled \mainmagstep}
+% looks better when embedded in a line with cmr10
+% (in Bob's opinion).
+\setfont\textbf\bfshape{10}{\mainmagstep}
+\setfont\textit\itshape{10}{\mainmagstep}
+\setfont\textsl\slshape{10}{\mainmagstep}
+\setfont\textsf\sfshape{10}{\mainmagstep}
+\setfont\textsc\scshape{10}{\mainmagstep}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}
\font\texti=cmmi10 scaled \mainmagstep
\font\textsy=cmsy10 scaled \mainmagstep
% A few fonts for @defun, etc.
-\setfont\defbf{bx10 scaled \magstep1} %was 1314
-\setfont\deftt{tt10 scaled \magstep1}
+\setfont\defbf\bxshape{10}{\magstep1} %was 1314
+\setfont\deftt\ttshape{10}{\magstep1}
\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
-% Fonts for indices and small examples.
-% We actually use the slanted font rather than the italic,
-% because texinfo normally uses the slanted fonts for that.
-% Do not make many font distinctions in general in the index, since they
-% aren't very useful.
-\setfont\ninett{tt9}
-\setfont\indrm{r9}
-\setfont\indit{sl9}
-\let\indsl=\indit
-\let\indtt=\ninett
-\let\indsf=\indrm
-\let\indbf=\indrm
-\setfont\indsc{csc10 at 9pt}
-\font\indi=cmmi9
-\font\indsy=cmsy9
-
-% Fonts for headings
-\setfont\chaprm{bx12 scaled \magstep2}
-\setfont\chapit{ti12 scaled \magstep2}
-\setfont\chapsl{sl12 scaled \magstep2}
-\setfont\chaptt{tt12 scaled \magstep2}
-\setfont\chapsf{ss12 scaled \magstep2}
+% Fonts for indices, footnotes, small examples (9pt).
+\setfont\smallrm\rmshape{9}{1000}
+\setfont\smalltt\ttshape{9}{1000}
+\setfont\smallbf\bfshape{10}{900}
+\setfont\smallit\itshape{9}{1000}
+\setfont\smallsl\slshape{9}{1000}
+\setfont\smallsf\sfshape{9}{1000}
+\setfont\smallsc\scshape{10}{900}
+\setfont\smallttsl\ttslshape{10}{900}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+
+% Fonts for small examples (8pt).
+\setfont\smallerrm\rmshape{8}{1000}
+\setfont\smallertt\ttshape{8}{1000}
+\setfont\smallerbf\bfshape{10}{800}
+\setfont\smallerit\itshape{8}{1000}
+\setfont\smallersl\slshape{8}{1000}
+\setfont\smallersf\sfshape{8}{1000}
+\setfont\smallersc\scshape{10}{800}
+\setfont\smallerttsl\ttslshape{10}{800}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+
+% Fonts for title page:
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\authorrm{\secrm}
+\def\authortt{\sectt}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\setfont\chaprm\rmbshape{12}{\magstep2}
+\setfont\chapit\itbshape{10}{\magstep3}
+\setfont\chapsl\slbshape{10}{\magstep3}
+\setfont\chaptt\ttbshape{12}{\magstep2}
+\setfont\chapttsl\ttslshape{10}{\magstep3}
+\setfont\chapsf\sfbshape{17}{1000}
\let\chapbf=\chaprm
-\setfont\chapsc{csc10 scaled\magstep3}
+\setfont\chapsc\scbshape{10}{\magstep3}
\font\chapi=cmmi12 scaled \magstep2
\font\chapsy=cmsy10 scaled \magstep3
-\setfont\secrm{bx12 scaled \magstep1}
-\setfont\secit{ti12 scaled \magstep1}
-\setfont\secsl{sl12 scaled \magstep1}
-\setfont\sectt{tt12 scaled \magstep1}
-\setfont\secsf{ss12 scaled \magstep1}
-\setfont\secbf{bx12 scaled \magstep1}
-\setfont\secsc{csc10 scaled\magstep2}
+% Section fonts (14.4pt).
+\setfont\secrm\rmbshape{12}{\magstep1}
+\setfont\secit\itbshape{10}{\magstep2}
+\setfont\secsl\slbshape{10}{\magstep2}
+\setfont\sectt\ttbshape{12}{\magstep1}
+\setfont\secttsl\ttslshape{10}{\magstep2}
+\setfont\secsf\sfbshape{12}{\magstep1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}
\font\seci=cmmi12 scaled \magstep1
\font\secsy=cmsy10 scaled \magstep2
-% \setfont\ssecrm{bx10 scaled \magstep1} % This size an font looked bad.
-% \setfont\ssecit{cmti10 scaled \magstep1} % The letters were too crowded.
-% \setfont\ssecsl{sl10 scaled \magstep1}
-% \setfont\ssectt{tt10 scaled \magstep1}
-% \setfont\ssecsf{ss10 scaled \magstep1}
-
-%\setfont\ssecrm{b10 scaled 1315} % Note the use of cmb rather than cmbx.
-%\setfont\ssecit{ti10 scaled 1315} % Also, the size is a little larger than
-%\setfont\ssecsl{sl10 scaled 1315} % being scaled magstep1.
-%\setfont\ssectt{tt10 scaled 1315}
-%\setfont\ssecsf{ss10 scaled 1315}
-
-%\let\ssecbf=\ssecrm
-
-\setfont\ssecrm{bx12 scaled \magstephalf}
-\setfont\ssecit{ti12 scaled \magstephalf}
-\setfont\ssecsl{sl12 scaled \magstephalf}
-\setfont\ssectt{tt12 scaled \magstephalf}
-\setfont\ssecsf{ss12 scaled \magstephalf}
-\setfont\ssecbf{bx12 scaled \magstephalf}
-\setfont\ssecsc{csc10 scaled \magstep1}
+% Subsection fonts (13.15pt).
+\setfont\ssecrm\rmbshape{12}{\magstephalf}
+\setfont\ssecit\itbshape{10}{1315}
+\setfont\ssecsl\slbshape{10}{1315}
+\setfont\ssectt\ttbshape{12}{\magstephalf}
+\setfont\ssecttsl\ttslshape{10}{1315}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{\magstep1}
\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled \magstep1
+\font\ssecsy=cmsy10 scaled 1315
% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
% but that is not a standard magnification.
-% Fonts for title page:
-\setfont\titlerm{bx12 scaled \magstep3}
-\let\authorrm = \secrm
-
% In order for the font changes to affect most math symbols and letters,
% we have to define the \textfont of the standard families. Since
-% texinfo doesn't allow for producing subscripts and superscripts, we
-% don't bother to reset \scriptfont and \scriptscriptfont (which would
-% also require loading a lot more fonts).
+% texinfo doesn't allow for producing subscripts and superscripts except
+% in the main text, we don't bother to reset \scriptfont and
+% \scriptscriptfont (which would also require loading a lot more fonts).
%
\def\resetmathfonts{%
- \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
- \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
- \textfont\ttfam = \tentt \textfont\sffam = \tensf
+ \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
+ \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
+ \textfont\ttfam=\tentt \textfont\sffam=\tensf
}
-
% The font-changing commands redefine the meanings of \tenSTYLE, instead
% of just \STYLE. We do this so that font changes will continue to work
% in math mode, where it is the current \fam that is relevant in most
-% cases, not the current. Plain TeX does, for example,
-% \def\bf{\fam=\bffam \tenbf} By redefining \tenbf, we obviate the need
-% to redefine \bf itself.
+% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
+% \tenbf}, for example. By redefining \tenbf, we obviate the need to
+% redefine \bf itself.
\def\textfonts{%
\let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
- \resetmathfonts}
+ \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
+ \resetmathfonts \setleading{\textleading}}
+\def\titlefonts{%
+ \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+ \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+ \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+ \let\tenttsl=\titlettsl
+ \resetmathfonts \setleading{25pt}}
+\def\titlefont#1{{\titlefonts\rm #1}}
\def\chapfonts{%
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
- \resetmathfonts}
+ \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
+ \resetmathfonts \setleading{19pt}}
\def\secfonts{%
\let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
\let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
- \resetmathfonts}
+ \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
+ \resetmathfonts \setleading{16pt}}
\def\subsecfonts{%
\let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
\let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
- \resetmathfonts}
-\def\indexfonts{%
- \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
- \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
- \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy
- \resetmathfonts}
+ \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
+ \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
+\def\smallfonts{%
+ \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+ \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+ \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+ \let\tenttsl=\smallttsl
+ \resetmathfonts \setleading{10.5pt}}
+\def\smallerfonts{%
+ \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
+ \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
+ \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
+ \let\tenttsl=\smallerttsl
+ \resetmathfonts \setleading{9.5pt}}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts. If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+% 8.5x11=86 smallbook=72 a4=90 a5=69
+% If we use \smallerfonts (8pt), then we can fit this many characters:
+% 8.5x11=90+ smallbook=80 a4=90+ a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt. So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+% 8.5x11=71 smallbook=60 a4=75 a5=58
+%
+% I wish we used A4 paper on this side of the Atlantic.
+%
+% --karl, 24jan03.
+
% Set up the default fonts, so we can use them for creating boxes.
%
\textfonts
+% Define these so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
% Count depth in font-changes, for error checks
\newcount\fontdepth \fontdepth=0
% Fonts for short table of contents.
-\setfont\shortcontrm{r12}
-\setfont\shortcontbf{bx12}
-\setfont\shortcontsl{sl12}
+\setfont\shortcontrm\rmshape{12}{1000}
+\setfont\shortcontbf\bxshape{12}{1000}
+\setfont\shortcontsl\slshape{12}{1000}
+\setfont\shortconttt\ttshape{12}{1000}
%% Add scribe-like font environments, plus @l for inline lisp (usually sans
%% serif) and @ii for TeX italic
% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
% unless the following character is such as not to need one.
-\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
-\def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx}
+\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else
+ \ptexslash\fi\fi\fi}
+\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx}
+\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx}
\let\i=\smartitalic
-\let\var=\smartitalic
-\let\dfn=\smartitalic
+\let\var=\smartslanted
+\let\dfn=\smartslanted
\let\emph=\smartitalic
-\let\cite=\smartitalic
+\let\cite=\smartslanted
\def\b#1{{\bf #1}}
\let\strong=\b
\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
\def\restorehyphenation{\hyphenchar\font = `- }
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\catcode`@=11
+ \def\frenchspacing{%
+ \sfcode\dotChar =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
+ \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+ }
+\catcode`@=\other
+
\def\t#1{%
- {\tt \nohyphenation \rawbackslash \frenchspacing #1}%
+ {\tt \rawbackslash \frenchspacing #1}%
\null
}
-\let\ttfont = \t
-%\def\samp #1{`{\tt \rawbackslash \frenchspacing #1}'\null}
-\def\samp #1{`\tclose{#1}'\null}
-\def\key #1{{\tt \nohyphenation \uppercase{#1}}\null}
+\let\ttfont=\t
+\def\samp#1{`\tclose{#1}'\null}
+\setfont\keyrm\rmshape{8}{1000}
+\font\keysy=cmsy9
+\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+ \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+ \vbox{\hrule\kern-0.4pt
+ \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+ \kern-0.4pt\hrule}%
+ \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+% The old definition, with no lozenge:
+%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+% @file, @option are the same as @samp.
\let\file=\samp
+\let\option=\samp
% @code is a modification of @t,
% which makes spaces the same size as normal in the surrounding text.
}
% We *must* turn on hyphenation at `-' and `_' in \code.
-% Otherwise, it is too hard to avoid overful hboxes
+% Otherwise, it is too hard to avoid overfull hboxes
% in the Emacs manual, the Library manual, etc.
% Unfortunately, TeX uses one parameter (\hyphenchar) to control
% both hyphenation at - and hyphenation within words.
% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate an a dash.
+% and arrange explicitly to hyphenate at a dash.
% -- rms.
{
-\catcode`\-=\active
-\catcode`\_=\active
-\global\def\code{\begingroup \catcode`\-=\active \let-\codedash \catcode`\_=\active \let_\codeunder \codex}
-% The following is used by \doprintindex to insure that long function names
-% wrap around. It is necessary for - and _ to be active before the index is
-% read from the file, as \entry parses the arguments long before \code is
-% ever called. -- mycroft
-\global\def\indexbreaks{\catcode`\-=\active \let-\realdash \catcode`\_=\active \let_\realunder}
+ \catcode`\-=\active
+ \catcode`\_=\active
+ %
+ \global\def\code{\begingroup
+ \catcode`\-=\active \let-\codedash
+ \catcode`\_=\active \let_\codeunder
+ \codex
+ }
+ %
+ % If we end up with any active - characters when handling the index,
+ % just treat them as a normal -.
+ \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
}
+
\def\realdash{-}
-\def\realunder{_}
\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{\normalunderscore\discretionary{}{}{}}
+\def\codeunder{%
+ % this is all so @math{@code{var_name}+1} can work. In math mode, _
+ % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+ % will therefore expand the active definition of _, which is us
+ % (inside @code that is), therefore an endless loop.
+ \ifusingtt{\ifmmode
+ \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+ \else\normalunderscore \fi
+ \discretionary{}{}{}}%
+ {\_}%
+}
\def\codex #1{\tclose{#1}\endgroup}
-%\let\exp=\tclose %Was temporary
-
% @kbd is like @code, except that if the argument is just one @key command,
% then @kbd has no effect.
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+% `example' (@kbd uses ttsl only inside of @example and friends),
+% or `code' (@kbd uses normal tty font always).
+\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
+\def\kbdinputstylexxx#1{%
+ \def\arg{#1}%
+ \ifx\arg\worddistinct
+ \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+ \else\ifx\arg\wordexample
+ \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+ \else\ifx\arg\wordcode
+ \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+ \else
+ \errhelp = \EMsimple
+ \errmessage{Unknown @kbdinputstyle option `\arg'}%
+ \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct.'
+\kbdinputstyle distinct
+
\def\xkey{\key}
\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else\tclose{\look}\fi
-\else\tclose{\look}\fi}
+\else{\tclose{\kbdfont\look}}\fi
+\else{\tclose{\kbdfont\look}}\fi}
+
+% For @url, @env, @command quotes seem unnecessary, so use \code.
+\let\url=\code
+\let\env=\code
+\let\command=\code
+
+% @uref (abbreviation for `urlref') takes an optional (comma-separated)
+% second argument specifying the text to display and an optional third
+% arg as text to display instead of (rather than in addition to) the url
+% itself. First (mandatory) arg is the url. Perhaps eventually put in
+% a hypertex \special here.
+%
+\def\uref#1{\douref #1,,,\finish}
+\def\douref#1,#2,#3,#4\finish{\begingroup
+ \unsepspaces
+ \pdfurl{#1}%
+ \setbox0 = \hbox{\ignorespaces #3}%
+ \ifdim\wd0 > 0pt
+ \unhbox0 % third arg given, show only that
+ \else
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0 > 0pt
+ \ifpdf
+ \unhbox0 % PDF: 2nd arg given, show only it
+ \else
+ \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
+ \fi
+ \else
+ \code{#1}% only url given, so show it
+ \fi
+ \fi
+ \endlink
+\endgroup}
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+ \def\email#1{\doemail#1,,\finish}
+ \def\doemail#1,#2,#3\finish{\begingroup
+ \unsepspaces
+ \pdfurl{mailto:#1}%
+ \setbox0 = \hbox{\ignorespaces #2}%
+ \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+ \endlink
+ \endgroup}
+\else
+ \let\email=\uref
+\fi
+
+% Check if we are currently using a typewriter font. Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of
-% @dmn{}pt.
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
%
\def\dmn#1{\thinspace #1}
\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-\def\l#1{{\li #1}\null} %
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find. We need it for
+% Polish suppressed-l. --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}} % roman font
+\def\sc#1{{\smallcaps#1}} % smallcaps font
+\def\ii#1{{\it #1}} % italic font
+
+% @acronym downcases the argument and prints in smallcaps.
+\def\acronym#1{{\smallcaps \lowercase{#1}}}
+
+% @pounds{} is a sterling sign.
+\def\pounds{{\it\$}}
+
+% @registeredsymbol - R in a circle. For now, only works in text size;
+% we'd have to redo the font mechanism to change the \scriptstyle and
+% \scriptscriptstyle font sizes to make it look right in headings.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+ $^{{\ooalign{\hfil\raise.07ex\hbox{$\scriptstyle\rm R$}\hfil\crcr\Orb}}%
+ }$%
+}
-\def\r#1{{\rm #1}} % roman font
-% Use of \lowercase was suggested.
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
\message{page headings,}
\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
% First the title page. Must do @settitle before @titlepage.
-\def\titlefont#1{{\titlerm #1}}
-
\newif\ifseenauthor
\newif\iffinishedtitlepage
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
\def\shorttitlepage{\parsearg\shorttitlepagezzz}
\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
+ \endgroup\page\hbox{}\page}
\def\titlepage{\begingroup \parindent=0pt \textfonts
\let\subtitlerm=\tenrm
-% I deinstalled the following change because \cmr12 is undefined.
-% This change was not in the ChangeLog anyway. --rms.
-% \let\subtitlerm=\cmr12
\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
%
- \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
+ \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines
+ \let\tt=\authortt}%
%
% Leave some space at the very top of the page.
\vglue\titlepagetopglue
%
% Now you can print the title using @title.
\def\title{\parsearg\titlezzz}%
- \def\titlezzz##1{\leftline{\titlefont{##1}}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
+ \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
+ % print a rule at the page bottom also.
+ \finishedtitlepagefalse
+ \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
% No rule at page bottom unless we print one at the top with @title.
\finishedtitlepagetrue
%
\let\oldpage = \page
\def\page{%
\iffinishedtitlepage\else
- \finishtitlepage
+ \finishtitlepage
\fi
\oldpage
\let\page = \oldpage
% after the title page, which we certainly don't want.
\oldpage
\endgroup
+ %
+ % Need this before the \...aftertitlepage checks so that if they are
+ % in effect the toc pages will come out with page numbers.
\HEADINGSon
+ %
+ % If they want short, they certainly want long too.
+ \ifsetshortcontentsaftertitlepage
+ \shortcontents
+ \contents
+ \global\let\shortcontents = \relax
+ \global\let\contents = \relax
+ \fi
+ %
+ \ifsetcontentsaftertitlepage
+ \contents
+ \global\let\contents = \relax
+ \global\let\shortcontents = \relax
+ \fi
}
\def\finishtitlepage{%
\let\thispage=\folio
-\newtoks \evenheadline % Token sequence for heading line of even pages
-\newtoks \oddheadline % Token sequence for heading line of odd pages
-\newtoks \evenfootline % Token sequence for footing line of even pages
-\newtoks \oddfootline % Token sequence for footing line of odd pages
+\newtoks\evenheadline % headline on even pages
+\newtoks\oddheadline % headline on odd pages
+\newtoks\evenfootline % footline on even pages
+\newtoks\oddfootline % footline on odd pages
% Now make Tex use those variables
\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish}
-\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+ \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+ %
+ % Leave some space for the footline. Hopefully ok to assume
+ % @evenfooting will not be used by itself.
+ \global\advance\pageheight by -\baselineskip
+ \global\advance\vsize by -\baselineskip
+}
-\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish}
-\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
-\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
%
}% unbind the catcode of @.
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
+% @headings double turns headings on for double-sided printing.
+% @headings single turns headings on for single-sided printing.
+% @headings off turns them off.
+% @headings on same as @headings double, retained for compatibility.
+% @headings after turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
\def\headings #1 {\csname HEADINGS#1\endcsname}
% title on inside top of left hand pages, and page numbers on outside top
% edge of all pages.
\def\HEADINGSdouble{
-%\pagealignmacro
\global\pageno=1
\global\evenfootline={\hfil}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\folio\hfil\thistitle}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
}
+\let\contentsalignmacro = \chappager
+
% For single-sided printing, chapter title goes across top left of page,
% page number on top right.
\def\HEADINGSsingle{
-%\pagealignmacro
\global\pageno=1
\global\evenfootline={\hfil}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\thischapter\hfil\folio}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
}
\def\HEADINGSon{\HEADINGSdouble}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\folio\hfil\thistitle}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
}
\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
\global\oddfootline={\hfil}
\global\evenheadline={\line{\thischapter\hfil\folio}}
\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
}
% Subroutines used in generating headings
-% Produces Day Month Year style of output.
-\def\today{\number\day\space
-\ifcase\month\or
-January\or February\or March\or April\or May\or June\or
-July\or August\or September\or October\or November\or December\fi
-\space\number\year}
-
-% Use this if you want the Month Day, Year style of output.
-%\def\today{\ifcase\month\or
-%January\or February\or March\or April\or May\or June\or
-%July\or August\or September\or October\or November\or December\fi
-%\space\number\day, \number\year}
-
-% @settitle line... specifies the title of the document, for headings
-% It generates no output of its own
-
-\def\thistitle{No Title}
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\undefined
+\def\today{%
+ \number\day\space
+ \ifcase\month
+ \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+ \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+ \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+ \fi
+ \space\number\year}
+\fi
+
+% @settitle line... specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
\def\settitle{\parsearg\settitlezzz}
\def\settitlezzz #1{\gdef\thistitle{#1}}
-\message{tables,}
-
-% @tabs -- simple alignment
-
-% These don't work. For one thing, \+ is defined as outer.
-% So these macros cannot even be defined.
-
-%\def\tabs{\parsearg\tabszzz}
-%\def\tabszzz #1{\settabs\+#1\cr}
-%\def\tabline{\parsearg\tablinezzz}
-%\def\tablinezzz #1{\+#1\cr}
-%\def\&{&}
+\message{tables,}
% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
% default indentation of table text
\newif\ifitemxneedsnegativevskip
-\def\itemxpar{\par\ifitemxneedsnegativevskip\vskip-\parskip\nobreak\fi}
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
\def\internalBitem{\smallbreak \parsearg\itemzzz}
\def\internalBitemx{\itemxpar \parsearg\itemzzz}
\itemindex{#1}%
\nobreak % This prevents a break before @itemx.
%
- % Be sure we are not still in the middle of a paragraph.
- %{\parskip = 0in
- %\par
- %}%
- %
% If the item text does not fit in the space we have, put it on a line
% by itself, and do not allow a page break either before or after that
% line. We do not start a paragraph here because then if the next
% \parskip glue -- logically it's part of the @item we just started.
\nobreak \vskip-\parskip
%
- % Stop a page break at the \parskip glue coming up. Unfortunately
+ % Stop a page break at the \parskip glue coming up. (Unfortunately
% we can't prevent a possible page break at the following
- % \baselineskip glue.
- \nobreak
+ % \baselineskip glue.) However, if what follows is an environment
+ % such as @example, there will be no \parskip glue; then
+ % the negative vskip we just would cause the example and the item to
+ % crash together. So we use this bizarre value of 10001 as a signal
+ % to \aboveenvbreak to insert \parskip glue after all.
+ % (Possibly there are other commands that could be followed by
+ % @example which need the same treatment, but not section titles; or
+ % maybe section titles are the only special case and they should be
+ % penalty 10001...)
+ \penalty 10001
\endgroup
\itemxneedsnegativevskipfalse
\else
% The item text fits into the space. Start a paragraph, so that the
- % following text (if any) will end up on the same line. Since that
- % text will be indented by \tableindent, we make the item text be in
- % a zero-width box.
+ % following text (if any) will end up on the same line.
\noindent
- \rlap{\hskip -\tableindent\box0}\ignorespaces%
- \endgroup%
- \itemxneedsnegativevskiptrue%
+ % Do this with kerns and \unhbox so that if there is a footnote in
+ % the item text, it can migrate to the main vertical list and
+ % eventually be printed.
+ \nobreak\kern-\tableindent
+ \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+ \unhbox0
+ \nobreak\kern\dimen0
+ \endgroup
+ \itemxneedsnegativevskiptrue
\fi
}
\def\xitem{\errmessage{@xitem while not in a table}}
\def\xitemx{\errmessage{@xitemx while not in a table}}
-%% Contains a kludge to get @end[description] to work
+% Contains a kludge to get @end[description] to work.
\def\description{\tablez{\dontindex}{1}{}{}{}{}}
+% @table, @ftable, @vtable.
\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
{\obeylines\obeyspaces%
\gdef\tablex #1^^M{%
\def\tablez #1#2#3#4#5#6{%
\aboveenvbreak %
\begingroup %
-\def\Edescription{\Etable}% Neccessary kludge.
+\def\Edescription{\Etable}% Necessary kludge.
\let\itemindex=#1%
\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
\ifnum 0#4>0 \tableindent=#4\mil \fi %
\def\itemize{\parsearg\itemizezzz}
\def\itemizezzz #1{%
- \begingroup % ended by the @end itemsize
+ \begingroup % ended by the @end itemize
\itemizey {#1}{\Eitemize}
}
-\def\itemizey #1#2{%
-\aboveenvbreak %
-\itemmax=\itemindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \itemindent %
-\exdentamount=\itemindent
-\parindent = 0pt %
-\parskip = \smallskipamount %
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def#2{\endgraf\afterenvbreak\endgroup}%
-\def\itemcontents{#1}%
-\let\item=\itemizeitem}
-
-% Set sfcode to normal for the chars that usually have another value.
-% These are `.?!:;,'
-\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
- \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
+\def\itemizey#1#2{%
+ \aboveenvbreak
+ \itemmax=\itemindent
+ \advance\itemmax by -\itemmargin
+ \advance\leftskip by \itemindent
+ \exdentamount=\itemindent
+ \parindent=0pt
+ \parskip=\smallskipamount
+ \ifdim\parskip=0pt \parskip=2pt \fi
+ \def#2{\endgraf\afterenvbreak\endgroup}%
+ \def\itemcontents{#1}%
+ % @itemize with no arg is equivalent to @itemize @bullet.
+ \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+ \let\item=\itemizeitem
+}
% \splitoff TOKENS\endmark defines \first to be the first token in
% TOKENS, and \rest to be the remainder.
\def\itemizeitem{%
\advance\itemno by 1
{\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{\in hmode at itemizeitem}\fi
+\ifhmode \errmessage{In hmode at itemizeitem}\fi
{\parskip=0in \hskip 0pt
\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
\vadjust{\penalty 1200}}%
\flushcr}
% @multitable macros
-% Amy Hendrickson, 8/18/94
+% Amy Hendrickson, 8/18/94, 3/6/96
%
-% @multitable ... @endmultitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble. Width
% can be specified either with sample text given in a template line,
% or in percent of \hsize, the current width of text on page.
% To make preamble:
%
-% Either define widths of columns in terms of percent of \hsize:
-% @multitable @percentofhsize .2 .3 .5
+% Either define widths of columns in terms of percent of \hsize:
+% @multitable @columnfractions .25 .3 .45
% @item ...
%
-% Numbers following @percentofhsize are the percent of the total
+% Numbers following @columnfractions are the percent of the total
% current hsize to be used for each column. You may use as many
% columns as desired.
+
% Or use a template:
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
% @item ...
% using the widest term desired in each column.
+%
+% For those who want to use more than one line's worth of words in
+% the preamble, break the line within one argument and it
+% will parse correctly, i.e.,
+%
+% @multitable {Column 1 template} {Column 2 template} {Column 3
+% template}
+% Not:
+% @multitable {Column 1 template} {Column 2 template}
+% {Column 3 template}
-
-% Each new table line starts with @item, each subsequent new column
+% Each new table line starts with @item, each subsequent new column
% starts with @tab. Empty columns may be produced by supplying @tab's
% with nothing between them for as many times as empty columns are needed,
% ie, @tab@tab@tab will produce two empty columns.
-% @item, @tab, @multicolumn or @endmulticolumn do not need to be on their
+% @item, @tab, @multitable or @end multitable do not need to be on their
% own lines, but it will not hurt if they are.
% Sample multitable:
% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
+% @item
+% first col stuff
+% @tab
+% second col stuff
+% @tab
+% third col
+% @item first col stuff @tab second col stuff
% @tab Many paragraphs of text may be used in any column.
-%
+%
% They will wrap at the width determined by the template.
% @item@tab@tab This will be in third column.
-% @endmultitable
+% @end multitable
% Default dimensions may be reset by user.
-% @intableparskip will set vertical space between paragraphs in table.
-% @intableparindent will set paragraph indent in table.
-% @spacebetweencols will set horizontal space to be left between columns.
-% @spacebetweenlines will set vertical space to be left between lines.
-
-%%%%
-% Dimensions
-
-\newdimen\intableparskip
-\newdimen\intableparindent
-\newdimen\spacebetweencols
-\newdimen\spacebetweenlines
-\intableparskip=0pt
-\intableparindent=6pt
-\spacebetweencols=12pt
-\spacebetweenlines=12pt
-
-%%%%
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+% to baseline.
+% 0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
% Macros used to set up halign preamble:
+%
\let\endsetuptable\relax
\def\xendsetuptable{\endsetuptable}
-\let\percentofhsize\relax
-\def\xpercentofhsize{\percentofhsize}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
\newif\ifsetpercent
+% #1 is the part of the @columnfraction before the decimal point, which
+% is presumably either 0 or the empty string (but we don't check, we
+% just throw it away). #2 is the decimal part, which we use as the
+% percent of \hsize for this column.
+\def\pickupwholefraction#1.#2 {%
+ \global\advance\colcount by 1
+ \expandafter\xdef\csname col\the\colcount\endcsname{.#2\hsize}%
+ \setuptable
+}
+
\newcount\colcount
-\def\setuptable#1{\def\firstarg{#1}%
-\ifx\firstarg\xendsetuptable\let\go\relax%
-\else
- \ifx\firstarg\xpercentofhsize\global\setpercenttrue%
+\def\setuptable#1{%
+ \def\firstarg{#1}%
+ \ifx\firstarg\xendsetuptable
+ \let\go = \relax
\else
- \ifsetpercent
- \if#1.\else%
- \global\advance\colcount by1 %
- \expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
- \fi
+ \ifx\firstarg\xcolumnfractions
+ \global\setpercenttrue
+ \else
+ \ifsetpercent
+ \let\go\pickupwholefraction
+ \else
+ \global\advance\colcount by 1
+ \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+ % separator; typically that is always in the input, anyway.
+ \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+ \fi
+ \fi
+ \ifx\go\pickupwholefraction
+ % Put the argument back for the \pickupwholefraction call, so
+ % we'll always have a period there to be parsed.
+ \def\go{\pickupwholefraction#1}%
\else
- \global\advance\colcount by1
- \setbox0=\hbox{#1}%
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+ \let\go = \setuptable
\fi%
- \fi%
- \let\go\setuptable%
-\fi\go}
-%%%%
-% multitable syntax
-\def\tab{&}
-
-%%%%
-% @multitable ... @endmultitable definitions:
-
-\def\multitable#1\item{\bgroup
-\let\item\cr
-\tolerance=9500
-\hbadness=9500
-\parskip=\intableparskip
-\parindent=\intableparindent
-\overfullrule=0pt
-\global\colcount=0\relax%
-\def\Emultitable{\global\setpercentfalse\global\everycr{}\cr\egroup\egroup}%
- % To parse everything between @multitable and @item :
-\def\one{#1}\expandafter\setuptable\one\endsetuptable
- % Need to reset this to 0 after \setuptable.
-\global\colcount=0\relax%
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
-\halign\bgroup&\global\advance\colcount by 1\relax%
-\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \spacebetweencols to all columns after
- % the first one.
- % If a template has been used, we will add \spacebetweencols
- % to the width of each template entry.
- % If user has set preamble in terms of percent of \hsize
- % we will use that dimension as the width of the column, and
- % the \leftskip will keep entries from bumping into each other.
- % Table will start at left margin and final column will justify at
- % right margin.
-\ifnum\colcount=1
-\else
- \ifsetpercent
- \else
- % If user has <not> set preamble in terms of percent of \hsize
- % we will advance \hsize by \spacebetweencols
- \advance\hsize by \spacebetweencols
\fi
- % In either case we will make \leftskip=\spacebetweencols:
-\leftskip=\spacebetweencols
-\fi
-\noindent##}\cr%
- % \everycr will reset column counter, \colcount, at the end of
- % each line. Every column entry will cause \colcount to advance by one.
- % The table preamble
- % looks at the current \colcount to find the correct column width.
-\global\everycr{\noalign{\nointerlineskip\vskip\spacebetweenlines
-\filbreak%% keeps underfull box messages off when table breaks over pages.
-\global\colcount=0\relax}}}
-
-\message{indexing,}
-% Index generation facilities
+ \go
+}
-% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within \newindex.
-{\catcode`\@=11
-\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
+% @multitable ... @end multitable definitions:
+%
+\def\multitable{\parsearg\dotable}
+\def\dotable#1{\bgroup
+ \vskip\parskip
+ \let\item=\crcrwithfootnotes
+ % A \tab used to include \hskip1sp. But then the space in a template
+ % line is not enough. That is bad. So let's go back to just & until
+ % we encounter the problem it was intended to solve again. --karl,
+ % nathan@acm.org, 20apr99.
+ \let\tab=&%
+ \let\startfootins=\startsavedfootnote
+ \tolerance=9500
+ \hbadness=9500
+ \setmultitablespacing
+ \parskip=\multitableparskip
+ \parindent=\multitableparindent
+ \overfullrule=0pt
+ \global\colcount=0
+ \def\Emultitable{%
+ \global\setpercentfalse
+ \crcrwithfootnotes\crcr
+ \egroup\egroup
+ }%
+ %
+ % To parse everything between @multitable and @item:
+ \setuptable#1 \endsetuptable
+ %
+ % \everycr will reset column counter, \colcount, at the end of
+ % each line. Every column entry will cause \colcount to advance by one.
+ % The table preamble
+ % looks at the current \colcount to find the correct column width.
+ \everycr{\noalign{%
+ %
+ % \filbreak%% keeps underfull box messages off when table breaks over pages.
+ % Maybe so, but it also creates really weird page breaks when the table
+ % breaks over pages. Wouldn't \vfil be better? Wait until the problem
+ % manifests itself, so it can be fixed for real --karl.
+ \global\colcount=0\relax}}%
+ %
+ % This preamble sets up a generic column definition, which will
+ % be used as many times as user calls for columns.
+ % \vtop will set a single line and will also let text wrap and
+ % continue for many paragraphs if desired.
+ \halign\bgroup&\global\advance\colcount by 1\relax
+ \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
+ %
+ % In order to keep entries from bumping into each other
+ % we will add a \leftskip of \multitablecolspace to all columns after
+ % the first one.
+ %
+ % If a template has been used, we will add \multitablecolspace
+ % to the width of each template entry.
+ %
+ % If the user has set preamble in terms of percent of \hsize we will
+ % use that dimension as the width of the column, and the \leftskip
+ % will keep entries from bumping into each other. Table will start at
+ % left margin and final column will justify at right margin.
+ %
+ % Make sure we don't inherit \rightskip from the outer environment.
+ \rightskip=0pt
+ \ifnum\colcount=1
+ % The first column will be indented with the surrounding text.
+ \advance\hsize by\leftskip
+ \else
+ \ifsetpercent \else
+ % If user has not set preamble in terms of percent of \hsize
+ % we will advance \hsize by \multitablecolspace.
+ \advance\hsize by \multitablecolspace
+ \fi
+ % In either case we will make \leftskip=\multitablecolspace:
+ \leftskip=\multitablecolspace
+ \fi
+ % Ignoring space at the beginning and end avoids an occasional spurious
+ % blank line, when TeX decides to break the line at the space before the
+ % box from the multistrut, so the strut ends up on a line by itself.
+ % For example:
+ % @multitable @columnfractions .11 .89
+ % @item @code{#}
+ % @tab Legal holiday which is valid in major parts of the whole country.
+ % Is automatically provided with highlighting sequences respectively marking
+ % characters.
+ \noindent\ignorespaces##\unskip\multistrut}\cr
+}
-% \newindex {foo} defines an index named foo.
-% It automatically defines \fooindex such that
-% \fooindex ...rest of line... puts an entry in the index foo.
-% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
-% The name of an index should be no more than 2 characters long
-% for the sake of vms.
+\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
+% If so, do nothing. If not, give it an appropriate dimension based on
+% current baselineskip.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+%% strut to put in table in case some entry doesn't have descenders,
+%% to keep lines equally spaced
+\let\multistrut = \strut
+\else
+%% FIXME: what is \box0 supposed to be?
+\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
+width0pt\relax} \fi
+%% Test to see if parskip is larger than space between lines of
+%% table. If not, do nothing.
+%% If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
+ %% than skip between lines in the table.
+\fi}
+
+% In case a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is
+% finished. Otherwise, the insertion is lost, it never migrates to the
+% main vertical list. --kasal, 22jan03.
+%
+\newbox\savedfootnotes
+%
+% \dotable \let's \startfootins to this, so that \dofootnote will call
+% it instead of starting the insertion right away.
+\def\startsavedfootnote{%
+ \global\setbox\savedfootnotes = \vbox\bgroup
+ \unvbox\savedfootnotes
+}
+\def\crcrwithfootnotes{%
+ \crcr
+ \ifvoid\savedfootnotes \else
+ \noalign{\insert\footins{\box\savedfootnotes}}%
+ \fi
+}
-\def\newindex #1{
-\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\doindex {#1}}
+\message{conditionals,}
+% Prevent errors for section commands.
+% Used in @ignore and in failing conditionals.
+\def\ignoresections{%
+ \let\appendix=\relax
+ \let\appendixsec=\relax
+ \let\appendixsection=\relax
+ \let\appendixsubsec=\relax
+ \let\appendixsubsection=\relax
+ \let\appendixsubsubsec=\relax
+ \let\appendixsubsubsection=\relax
+ %\let\begin=\relax
+ %\let\bye=\relax
+ \let\centerchap=\relax
+ \let\chapter=\relax
+ \let\contents=\relax
+ \let\section=\relax
+ \let\smallbook=\relax
+ \let\subsec=\relax
+ \let\subsection=\relax
+ \let\subsubsec=\relax
+ \let\subsubsection=\relax
+ \let\titlepage=\relax
+ \let\top=\relax
+ \let\unnumbered=\relax
+ \let\unnumberedsec=\relax
+ \let\unnumberedsection=\relax
+ \let\unnumberedsubsec=\relax
+ \let\unnumberedsubsection=\relax
+ \let\unnumberedsubsubsec=\relax
+ \let\unnumberedsubsubsection=\relax
}
-% @defindex foo == \newindex{foo}
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescriptionword{documentdescription}
+\def\documentdescription{\doignore{documentdescription}}
+\def\html{\doignore{html}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
-\def\defindex{\parsearg\newindex}
+% @dircategory CATEGORY -- specify a category of the dir file
+% which this file should belong to. Ignore this in TeX.
+\let\dircategory = \comment
-% Define @defcodeindex, like @defindex except put all entries in @code.
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
-\def\newcodeindex #1{
-\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\docodeindex {#1}}
+\def\doignore#1{\begingroup
+ % Don't complain about control sequences we have declared \outer.
+ \ignoresections
+ %
+ % Make sure that spaces turn into tokens that match what \doignoretext wants.
+ \catcode\spaceChar = 10
+ %
+ % Ignore braces, so mismatched braces don't cause trouble.
+ \catcode`\{ = 9
+ \catcode`\} = 9
+ %
+ % Count number of #1's that we've seen.
+ \doignorecount = 0
+ %
+ % Swallow text until we reach the matching `@end #1'.
+ \expandafter \dodoignore \csname#1\endcsname {#1}%
}
-\def\defcodeindex{\parsearg\newcodeindex}
-
-% @synindex foo bar makes index foo feed into index bar.
-% Do this instead of @defindex foo if you don't want it as a separate index.
-\def\synindex #1 #2 {%
-\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
-\expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\doindex {#2}}%
+{ \catcode`@=11 % We want to use \ST@P which cannot appear in texinfo source.
+ \obeylines %
+ %
+ \gdef\dodoignore#1#2{%
+ % #1 contains, e.g., \ifinfo, a.k.a. @ifinfo.
+ % #2 contains the string `ifinfo'.
+ %
+ % Define a command to find the next `@end #2', which must be on a line
+ % by itself.
+ \long\def\doignoretext##1^^M\end #2{\doignoretextyyy##1^^M#1\ST@P}%
+ % And this command to find another #1 command, at the beginning of a
+ % line. (Otherwise, we would consider a line `@c @ifset', for
+ % example, to count as an @ifset for nesting.)
+ \long\def\doignoretextyyy##1^^M#1##2\ST@P{\doignoreyyy{##2}\ST@P}%
+ %
+ % And now expand that command.
+ \obeylines %
+ \doignoretext ^^M%
+ }%
}
-% @syncodeindex foo bar similar, but put all entries made for index foo
-% inside @code.
-\def\syncodeindex #1 #2 {%
-\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
-\expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\docodeindex {#2}}%
+\def\doignoreyyy#1{%
+ \def\temp{#1}%
+ \ifx\temp\empty % Nothing found.
+ \let\next\doignoretextzzz
+ \else % Found a nested condition, ...
+ \advance\doignorecount by 1
+ \let\next\doignoretextyyy % ..., look for another.
+ % If we're here, #1 ends with ^^M\ifinfo (for example).
+ \fi
+ \next #1% the token \ST@P is present just after this macro.
}
-% Define \doindex, the driver for all \fooindex macros.
-% Argument #1 is generated by the calling \fooindex macro,
-% and it is "foo", the name of the index.
-
-% \doindex just uses \parsearg; it calls \doind for the actual work.
-% This is because \doind is more useful to call from other macros.
+% We have to swallow the remaining "\ST@P".
+%
+\def\doignoretextzzz#1{%
+ \ifnum\doignorecount = 0 % We have just found the outermost @end.
+ \let\next\enddoignore
+ \else % Still inside a nested condition.
+ \advance\doignorecount by -1
+ \let\next\doignoretext % Look for the next @end.
+ \fi
+ \next
+}
-% There is also \dosubind {index}{topic}{subtopic}
-% which makes an entry in a two-level index such as the operation index.
+% Finish off ignored text.
+\def\enddoignore{\endgroup\ignorespaces}
-\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
-\def\singleindexer #1{\doind{\indexname}{#1}}
-% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
-\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it. Make sure the catcode of space is correct to avoid
+% losing inside @example, for instance.
+%
+\def\set{\begingroup\catcode` =10
+ \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
+ \parsearg\setxxx}
+\def\setxxx#1{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+ \def\temp{#2}%
+ \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
+ \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
+ \fi
+ \endgroup
+}
+% Can't use \xdef to pre-expand #2 and save some time, since \temp or
+% \next or other control sequences that we've defined might get us into
+% an infinite loop. Consider `@set foo @cite{bar}'.
+\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
-\def\indexdummies{%
-% Take care of the plain tex accent commands.
-\def\"{\realbackslash "}%
-\def\`{\realbackslash `}%
-\def\'{\realbackslash '}%
-\def\^{\realbackslash ^}%
-\def\~{\realbackslash ~}%
-\def\={\realbackslash =}%
-\def\b{\realbackslash b}%
-\def\c{\realbackslash c}%
-\def\d{\realbackslash d}%
-\def\u{\realbackslash u}%
-\def\v{\realbackslash v}%
-\def\H{\realbackslash H}%
-% Take care of the plain tex special European modified letters.
-\def\oe{\realbackslash oe}%
-\def\ae{\realbackslash ae}%
-\def\aa{\realbackslash aa}%
-\def\OE{\realbackslash OE}%
-\def\AE{\realbackslash AE}%
-\def\AA{\realbackslash AA}%
-\def\o{\realbackslash o}%
-\def\O{\realbackslash O}%
-\def\l{\realbackslash l}%
-\def\L{\realbackslash L}%
-\def\ss{\realbackslash ss}%
-% Take care of texinfo commands likely to appear in an index entry.
-\def\_{{\realbackslash _}}%
-\def\w{\realbackslash w }%
-\def\bf{\realbackslash bf }%
-\def\rm{\realbackslash rm }%
-\def\sl{\realbackslash sl }%
-\def\sf{\realbackslash sf}%
-\def\tt{\realbackslash tt}%
-\def\gtr{\realbackslash gtr}%
-\def\less{\realbackslash less}%
-\def\hat{\realbackslash hat}%
-\def\char{\realbackslash char}%
-\def\TeX{\realbackslash TeX}%
-\def\dots{\realbackslash dots }%
-\def\copyright{\realbackslash copyright }%
-\def\tclose##1{\realbackslash tclose {##1}}%
-\def\code##1{\realbackslash code {##1}}%
-\def\samp##1{\realbackslash samp {##1}}%
-\def\t##1{\realbackslash r {##1}}%
-\def\r##1{\realbackslash r {##1}}%
-\def\i##1{\realbackslash i {##1}}%
-\def\b##1{\realbackslash b {##1}}%
-\def\cite##1{\realbackslash cite {##1}}%
-\def\key##1{\realbackslash key {##1}}%
-\def\file##1{\realbackslash file {##1}}%
-\def\var##1{\realbackslash var {##1}}%
-\def\kbd##1{\realbackslash kbd {##1}}%
-\def\dfn##1{\realbackslash dfn {##1}}%
-\def\emph##1{\realbackslash emph {##1}}%
-}
-
-% \indexnofonts no-ops all font-change commands.
-% This is used when outputting the strings to sort the index by.
-\def\indexdummyfont#1{#1}
-\def\indexdummytex{TeX}
-\def\indexdummydots{...}
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\def\clear{\parsearg\clearxxx}
+\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-\def\indexnofonts{%
-% Just ignore accents.
-\let\"=\indexdummyfont
-\let\`=\indexdummyfont
-\let\'=\indexdummyfont
-\let\^=\indexdummyfont
-\let\~=\indexdummyfont
-\let\==\indexdummyfont
-\let\b=\indexdummyfont
-\let\c=\indexdummyfont
-\let\d=\indexdummyfont
-\let\u=\indexdummyfont
-\let\v=\indexdummyfont
-\let\H=\indexdummyfont
-% Take care of the plain tex special European modified letters.
-\def\oe{oe}%
-\def\ae{ae}%
-\def\aa{aa}%
-\def\OE{OE}%
-\def\AE{AE}%
-\def\AA{AA}%
-\def\o{o}%
-\def\O{O}%
-\def\l{l}%
-\def\L{L}%
-\def\ss{ss}%
-\let\w=\indexdummyfont
-\let\t=\indexdummyfont
-\let\r=\indexdummyfont
-\let\i=\indexdummyfont
-\let\b=\indexdummyfont
-\let\emph=\indexdummyfont
-\let\strong=\indexdummyfont
-\let\cite=\indexdummyfont
-\let\sc=\indexdummyfont
-%Don't no-op \tt, since it isn't a user-level command
-% and is used in the definitions of the active chars like <, >, |...
-%\let\tt=\indexdummyfont
-\let\tclose=\indexdummyfont
-\let\code=\indexdummyfont
-\let\file=\indexdummyfont
-\let\samp=\indexdummyfont
-\let\kbd=\indexdummyfont
-\let\key=\indexdummyfont
-\let\var=\indexdummyfont
-\let\TeX=\indexdummytex
-\let\dots=\indexdummydots
-}
-
-% To define \realbackslash, we must make \ not be an escape.
-% We must first make another character (@) an escape
-% so we do not become unable to do a definition.
-
-{\catcode`\@=0 \catcode`\\=\other
-@gdef@realbackslash{\}}
+% @value{foo} gets the text saved in variable foo.
+{
+ \catcode`\_ = \active
+ %
+ % We might end up with active _ or - characters in the argument if
+ % we're called from @code, as @code{@value{foo-bar_}}. So \let any
+ % such active characters to their normal equivalents.
+ \gdef\value{\begingroup
+ \catcode`\-=\other \catcode`\_=\other
+ \indexbreaks \let_\normalunderscore
+ \valuexxx}
+}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we \let\value to this in \indexdummies). Ones
+% whose names contain - or _ still won't work, but we can't do anything
+% about that. The command has to be fully expandable (if the variable
+% is set), since the result winds up in the index file. This means that
+% if the variable's value contains other Texinfo commands, it's almost
+% certain it will fail (although perhaps we could fix that with
+% sufficient work to do a one-level expansion on the result, instead of
+% complete).
+%
+\def\expandablevalue#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ {[No value for ``#1'']}%
+ \message{Variable `#1', used in @value, is not set.}%
+ \else
+ \csname SET#1\endcsname
+ \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+\def\ifset{\parsearg\doifset}
+\def\doifset#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \let\next=\ifsetfail
+ \else
+ \let\next=\ifsetsucceed
+ \fi
+ \next
+}
+\def\ifsetsucceed{\conditionalsucceed{ifset}}
+\def\ifsetfail{\doignore{ifset}}
+\defineunmatchedend{ifset}
+
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+\def\ifclear{\parsearg\doifclear}
+\def\doifclear#1{%
+ \expandafter\ifx\csname SET#1\endcsname\relax
+ \let\next=\ifclearsucceed
+ \else
+ \let\next=\ifclearfail
+ \fi
+ \next
+}
+\def\ifclearsucceed{\conditionalsucceed{ifclear}}
+\def\ifclearfail{\doignore{ifclear}}
+\defineunmatchedend{ifclear}
+
+% @iftex, @ifnothtml, @ifnotinfo, @ifnotplaintext always succeed; we
+% read the text following, through the first @end iftex (etc.). Make
+% `@end iftex' (etc.) valid only after an @iftex.
+%
+\def\iftex{\conditionalsucceed{iftex}}
+\def\ifnothtml{\conditionalsucceed{ifnothtml}}
+\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
+\def\ifnotplaintext{\conditionalsucceed{ifnotplaintext}}
+\defineunmatchedend{iftex}
+\defineunmatchedend{ifnothtml}
+\defineunmatchedend{ifnotinfo}
+\defineunmatchedend{ifnotplaintext}
+
+% True conditional. Since \set globally defines its variables, we can
+% just start and end a group (to keep the @end definition undefined at
+% the outer level).
+%
+\def\conditionalsucceed#1{\begingroup
+ \expandafter\def\csname E#1\endcsname{\endgroup}%
+}
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
+\message{indexing,}
+% Index generation facilities
+
+% Define \newwrite to be identical to plain tex's \newwrite
+% except not \outer, so it can be used within \newindex.
+{\catcode`\@=11
+\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
+
+% \newindex {foo} defines an index named foo.
+% It automatically defines \fooindex such that
+% \fooindex ...rest of line... puts an entry in the index foo.
+% It also defines \fooindfile to be the number of the output channel for
+% the file that accumulates this index. The file's extension is foo.
+% The name of an index should be no more than 2 characters long
+% for the sake of vms.
+%
+\def\newindex#1{%
+ \iflinks
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+ \fi
+ \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
+ \noexpand\doindex{#1}}
+}
+
+% @defindex foo == \newindex{foo}
+%
+\def\defindex{\parsearg\newindex}
+
+% Define @defcodeindex, like @defindex except put all entries in @code.
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+ \iflinks
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \openout \csname#1indfile\endcsname \jobname.#1
+ \fi
+ \expandafter\xdef\csname#1index\endcsname{%
+ \noexpand\docodeindex{#1}}%
+}
+
+
+% @synindex foo bar makes index foo feed into index bar.
+% Do this instead of @defindex foo if you don't want it as a separate index.
+%
+% @syncodeindex foo bar similar, but put all entries made for index foo
+% inside @code.
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+ % Only do \closeout if we haven't already done it, else we'll end up
+ % closing the target index.
+ \expandafter \ifx\csname donesynindex#2\endcsname \undefined
+ % The \closeout helps reduce unnecessary open files; the limit on the
+ % Acorn RISC OS is a mere 16 files.
+ \expandafter\closeout\csname#2indfile\endcsname
+ \expandafter\let\csname\donesynindex#2\endcsname = 1
+ \fi
+ % redefine \fooindfile:
+ \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+ \expandafter\let\csname#2indfile\endcsname=\temp
+ % redefine \fooindex:
+ \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
+}
+
+% Define \doindex, the driver for all \fooindex macros.
+% Argument #1 is generated by the calling \fooindex macro,
+% and it is "foo", the name of the index.
+
+% \doindex just uses \parsearg; it calls \doind for the actual work.
+% This is because \doind is more useful to call from other macros.
+
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+
+\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
+\def\singleindexer #1{\doind{\indexname}{#1}}
+
+% like the previous two, but they put @code around the argument.
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
+\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+
+% Take care of Texinfo commands that can appear in an index entry.
+% Since there are some commands we want to expand, and others we don't,
+% we have to laboriously prevent expansion for those that we don't.
+%
+\def\indexdummies{%
+ \def\@{@}% change to @@ when we switch to @ as escape char in index files.
+ \def\ {\realbackslash\space }%
+ % Need these in case \tex is in effect and \{ is a \delimiter again.
+ % But can't use \lbracecmd and \rbracecmd because texindex assumes
+ % braces and backslashes are used only as delimiters.
+ \let\{ = \mylbrace
+ \let\} = \myrbrace
+ %
+ % \definedummyword defines \#1 as \realbackslash #1\space, thus
+ % effectively preventing its expansion. This is used only for control
+ % words, not control letters, because the \space would be incorrect
+ % for control characters, but is needed to separate the control word
+ % from whatever follows.
+ %
+ % For control letters, we have \definedummyletter, which omits the
+ % space.
+ %
+ % These can be used both for control words that take an argument and
+ % those that do not. If it is followed by {arg} in the input, then
+ % that will dutifully get written to the index (or wherever).
+ %
+ \def\definedummyword##1{%
+ \expandafter\def\csname ##1\endcsname{\realbackslash ##1\space}%
+ }%
+ \def\definedummyletter##1{%
+ \expandafter\def\csname ##1\endcsname{\realbackslash ##1}%
+ }%
+ %
+ % Do the redefinitions.
+ \commondummies
+}
+
+% For the aux file, @ is the escape character. So we want to redefine
+% everything using @ instead of \realbackslash. When everything uses
+% @, this will be simpler.
+%
+\def\atdummies{%
+ \def\@{@@}%
+ \def\ {@ }%
+ \let\{ = \lbraceatcmd
+ \let\} = \rbraceatcmd
+ %
+ % (See comments in \indexdummies.)
+ \def\definedummyword##1{%
+ \expandafter\def\csname ##1\endcsname{@##1\space}%
+ }%
+ \def\definedummyletter##1{%
+ \expandafter\def\csname ##1\endcsname{@##1}%
+ }%
+ %
+ % Do the redefinitions.
+ \commondummies
+}
+
+% Called from \indexdummies and \atdummies. \definedummyword and
+% \definedummyletter must be defined first.
+%
+\def\commondummies{%
+ %
+ \normalturnoffactive
+ %
+ % Control letters and accents.
+ \definedummyletter{_}%
+ \definedummyletter{,}%
+ \definedummyletter{"}%
+ \definedummyletter{`}%
+ \definedummyletter{'}%
+ \definedummyletter{^}%
+ \definedummyletter{~}%
+ \definedummyletter{=}%
+ \definedummyword{u}%
+ \definedummyword{v}%
+ \definedummyword{H}%
+ \definedummyword{dotaccent}%
+ \definedummyword{ringaccent}%
+ \definedummyword{tieaccent}%
+ \definedummyword{ubaraccent}%
+ \definedummyword{udotaccent}%
+ \definedummyword{dotless}%
+ %
+ % Other non-English letters.
+ \definedummyword{AA}%
+ \definedummyword{AE}%
+ \definedummyword{L}%
+ \definedummyword{OE}%
+ \definedummyword{O}%
+ \definedummyword{aa}%
+ \definedummyword{ae}%
+ \definedummyword{l}%
+ \definedummyword{oe}%
+ \definedummyword{o}%
+ \definedummyword{ss}%
+ %
+ % Although these internal commands shouldn't show up, sometimes they do.
+ \definedummyword{bf}%
+ \definedummyword{gtr}%
+ \definedummyword{hat}%
+ \definedummyword{less}%
+ \definedummyword{sf}%
+ \definedummyword{sl}%
+ \definedummyword{tclose}%
+ \definedummyword{tt}%
+ %
+ % Texinfo font commands.
+ \definedummyword{b}%
+ \definedummyword{i}%
+ \definedummyword{r}%
+ \definedummyword{sc}%
+ \definedummyword{t}%
+ %
+ \definedummyword{TeX}%
+ \definedummyword{acronym}%
+ \definedummyword{cite}%
+ \definedummyword{code}%
+ \definedummyword{command}%
+ \definedummyword{dfn}%
+ \definedummyword{dots}%
+ \definedummyword{emph}%
+ \definedummyword{env}%
+ \definedummyword{file}%
+ \definedummyword{kbd}%
+ \definedummyword{key}%
+ \definedummyword{math}%
+ \definedummyword{option}%
+ \definedummyword{samp}%
+ \definedummyword{strong}%
+ \definedummyword{uref}%
+ \definedummyword{url}%
+ \definedummyword{var}%
+ \definedummyword{verb}%
+ \definedummyword{w}%
+ %
+ % Assorted special characters.
+ \definedummyword{bullet}%
+ \definedummyword{copyright}%
+ \definedummyword{dots}%
+ \definedummyword{enddots}%
+ \definedummyword{equiv}%
+ \definedummyword{error}%
+ \definedummyword{expansion}%
+ \definedummyword{minus}%
+ \definedummyword{pounds}%
+ \definedummyword{point}%
+ \definedummyword{print}%
+ \definedummyword{result}%
+ %
+ % Handle some cases of @value -- where the variable name does not
+ % contain - or _, and the value does not contain any
+ % (non-fully-expandable) commands.
+ \let\value = \expandablevalue
+ %
+ % Normal spaces, not active ones.
+ \unsepspaces
+ %
+ % No macro expansion.
+ \turnoffmacros
+}
+
+% If an index command is used in an @example environment, any spaces
+% therein should become regular spaces in the raw index file, not the
+% expansion of \tie (\leavevmode \penalty \@M \ ).
+{\obeyspaces
+ \gdef\unsepspaces{\obeyspaces\let =\space}}
+
+
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names. It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexdummytex{TeX}
+\def\indexdummydots{...}
+%
+\def\indexnofonts{%
+ \def\ { }%
+ \def\@{@}%
+ % how to handle braces?
+ \def\_{\normalunderscore}%
+ %
+ \let\,=\asis
+ \let\"=\asis
+ \let\`=\asis
+ \let\'=\asis
+ \let\^=\asis
+ \let\~=\asis
+ \let\==\asis
+ \let\u=\asis
+ \let\v=\asis
+ \let\H=\asis
+ \let\dotaccent=\asis
+ \let\ringaccent=\asis
+ \let\tieaccent=\asis
+ \let\ubaraccent=\asis
+ \let\udotaccent=\asis
+ \let\dotless=\asis
+ %
+ % Other non-English letters.
+ \def\AA{AA}%
+ \def\AE{AE}%
+ \def\L{L}%
+ \def\OE{OE}%
+ \def\O{O}%
+ \def\aa{aa}%
+ \def\ae{ae}%
+ \def\l{l}%
+ \def\oe{oe}%
+ \def\o{o}%
+ \def\ss{ss}%
+ \def\exclamdown{!}%
+ \def\questiondown{?}%
+ %
+ % Don't no-op \tt, since it isn't a user-level command
+ % and is used in the definitions of the active chars like <, >, |, etc.
+ % Likewise with the other plain tex font commands.
+ %\let\tt=\asis
+ %
+ % Texinfo font commands.
+ \let\b=\asis
+ \let\i=\asis
+ \let\r=\asis
+ \let\sc=\asis
+ \let\t=\asis
+ %
+ \let\TeX=\indexdummytex
+ \let\acronym=\asis
+ \let\cite=\asis
+ \let\code=\asis
+ \let\command=\asis
+ \let\dfn=\asis
+ \let\dots=\indexdummydots
+ \let\emph=\asis
+ \let\env=\asis
+ \let\file=\asis
+ \let\kbd=\asis
+ \let\key=\asis
+ \let\math=\asis
+ \let\option=\asis
+ \let\samp=\asis
+ \let\strong=\asis
+ \let\uref=\asis
+ \let\url=\asis
+ \let\var=\asis
+ \let\verb=\asis
+ \let\w=\asis
+}
\let\indexbackslash=0 %overridden during \printindex.
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-\let\SETmarginindex=\relax %initialize!
-% workhorse for all \fooindexes
-% #1 is name of index, #2 is stuff to put there
-\def\doind #1#2{%
-% Put the index entry in the margin if desired.
-\ifx\SETmarginindex\relax\else%
-\insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
-\fi%
-{\count10=\lastpenalty %
-{\indexdummies % Must do this here, since \bf, etc expand at this stage
-\escapechar=`\\%
-{\let\folio=0% Expand all macros now EXCEPT \folio
-\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
-% so it will be output as is; and it will print as backslash in the indx.
-%
-% Now process the index-string once, with all font commands turned off,
-% to get the string to sort the index by.
-{\indexnofonts
-\xdef\temp1{#2}%
-}%
-% Now produce the complete index entry. We process the index-string again,
-% this time with font commands expanded, to get what to print in the index.
-\edef\temp{%
-\write \csname#1indfile\endcsname{%
-\realbackslash entry {\temp1}{\folio}{#2}}}%
-\temp }%
-}\penalty\count10}}
-
-\def\dosubind #1#2#3{%
-{\count10=\lastpenalty %
-{\indexdummies % Must do this here, since \bf, etc expand at this stage
-\escapechar=`\\%
-{\let\folio=0%
-\def\rawbackslashxx{\indexbackslash}%
-%
-% Now process the index-string once, with all font commands turned off,
-% to get the string to sort the index by.
-{\indexnofonts
-\xdef\temp1{#2 #3}%
-}%
-% Now produce the complete index entry. We process the index-string again,
-% this time with font commands expanded, to get what to print in the index.
-\edef\temp{%
-\write \csname#1indfile\endcsname{%
-\realbackslash entry {\temp1}{\folio}{#2}{#3}}}%
-\temp }%
-}\penalty\count10}}
+% Most index entries go through here, but \dosubind is the general case.
+%
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% Workhorse for all \fooindexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% \empty if called from \doind, as we usually are. The main exception
+% is with defuns, which call us directly.
+%
+\def\dosubind#1#2#3{%
+ \iflinks
+ {%
+ % Store the main index entry text (including the third arg).
+ \toks0 = {#2}%
+ % If third arg is present, precede it with space.
+ \def\thirdarg{#3}%
+ \ifx\thirdarg\empty \else
+ \toks0 = \expandafter{\the\toks0 \space #3}%
+ \fi
+ %
+ \edef\writeto{\csname#1indfile\endcsname}%
+ %
+ \ifvmode
+ \dosubindsanitize
+ \else
+ \dosubindwrite
+ \fi
+ }%
+ \fi
+}
+
+% Write the entry to the index file:
+%
+\def\dosubindwrite{%
+ % Put the index entry in the margin if desired.
+ \ifx\SETmarginindex\relax\else
+ \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+ \fi
+ %
+ % Remember, we are within a group.
+ \indexdummies % Must do this here, since \bf, etc expand at this stage
+ \escapechar=`\\
+ \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
+ % so it will be output as is; and it will print as backslash.
+ %
+ % Process the index entry with all font commands turned off, to
+ % get the string to sort by.
+ {\indexnofonts
+ \edef\temp{\the\toks0}% need full expansion
+ \xdef\indexsorttmp{\temp}%
+ }%
+ %
+ % Set up the complete index entry, with both the sort key and
+ % the original text, including any font commands. We write
+ % three arguments to \entry to the .?? file (four in the
+ % subentry case), texindex reduces to two when writing the .??s
+ % sorted result.
+ \edef\temp{%
+ \write\writeto{%
+ \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+ }%
+ \temp
+}
+
+% Take care of unwanted page breaks:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again. Otherwise, the whatsit generated by the
+% \write will make \lastskip zero. The result is that sequences
+% like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode. We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+\def\dosubindsanitize{%
+ % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+ \skip0 = \lastskip
+ \count255 = \lastpenalty
+ %
+ % If \lastskip is nonzero, that means the last item was a
+ % skip. And since a skip is discardable, that means this
+ % -\skip0 glue we're inserting is preceded by a
+ % non-discardable item, therefore it is not a potential
+ % breakpoint, therefore no \nobreak needed.
+ \ifdim\lastskip = 0pt \else \vskip-\skip0 \fi
+ %
+ \dosubindwrite
+ %
+ \ifdim\skip0 = 0pt
+ % if \lastskip was zero, perhaps the last item was a
+ % penalty, and perhaps it was >=10000, e.g., a \nobreak.
+ % In that case, we want to re-insert the penalty; since we
+ % just inserted a non-discardable item, any following glue
+ % (such as a \parskip) would be a breakpoint. For example:
+ % @deffn deffn-whatever
+ % @vindex index-whatever
+ % Description.
+ % would allow a break between the index-whatever whatsit
+ % and the "Description." paragraph.
+ \ifnum\count255>9999 \nobreak \fi
+ \else
+ % On the other hand, if we had a nonzero \lastskip,
+ % this make-up glue would be preceded by a non-discardable item
+ % (the whatsit from the \write), so we must insert a \nobreak.
+ \nobreak\vskip\skip0
+ \fi
+}
% The index entry written in the file actually looks like
% \entry {sortstring}{page}{topic}
% Define the macros used in formatting output of the sorted index material.
-% This is what you call to cause a particular index to get printed.
-% Write
-% @unnumbered Function Index
-% @printindex fn
-
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
\def\printindex{\parsearg\doprintindex}
-
-\def\doprintindex#1{%
- \tex
- \dobreak \chapheadingskip {10000}
- \catcode`\%=\other\catcode`\&=\other\catcode`\#=\other
- \catcode`\$=\other
- \catcode`\~=\other
- \indexbreaks
+\def\doprintindex#1{\begingroup
+ \dobreak \chapheadingskip{10000}%
%
- % The following don't help, since the chars were translated
- % when the raw index was written, and their fonts were discarded
- % due to \indexnofonts.
- %\catcode`\"=\active
- %\catcode`\^=\active
- %\catcode`\_=\active
- %\catcode`\|=\active
- %\catcode`\<=\active
- %\catcode`\>=\active
- % %
- \def\indexbackslash{\rawbackslashxx}
- \indexfonts\rm \tolerance=9500 \advance\baselineskip -1pt
- \begindoublecolumns
+ \smallfonts \rm
+ \tolerance = 9500
+ \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+ \indexbreaks
%
% See if the index file exists and is nonempty.
+ % Change catcode of @ here so that if the index file contains
+ % \initial {@}
+ % as its first line, TeX doesn't complain about mismatched braces
+ % (because it thinks @} is a control sequence).
+ \catcode`\@ = 11
\openin 1 \jobname.#1s
\ifeof 1
% \enddoublecolumns gets confused if there is no text in the index,
% and it loses the chapter title and the aux file entries for the
% index. The easiest way to prevent this problem is to make sure
% there is some text.
- (Index is nonexistent)
- \else
+ \putwordIndexNonexistent
+ \else
%
% If the index file exists but is empty, then \openin leaves \ifeof
% false. We have to make TeX try to read something from the file, so
% it can discover if there is anything in it.
\read 1 to \temp
\ifeof 1
- (Index is empty)
+ \putwordIndexIsEmpty
\else
+ % Index files are almost Texinfo source, but we use \ as the escape
+ % character. It would be better to use @, but that's too big a change
+ % to make right now.
+ \def\indexbackslash{\rawbackslashxx}%
+ \catcode`\\ = 0
+ \escapechar = `\\
+ \begindoublecolumns
\input \jobname.#1s
+ \enddoublecolumns
\fi
\fi
\closein 1
- \enddoublecolumns
- \Etex
-}
+\endgroup}
% These macros are used by the sorted index file itself.
% Change them to control the appearance of the index.
-% Same as \bigskipamount except no shrink.
-% \balancecolumns gets confused if there is any shrink.
-\newskip\initialskipamount \initialskipamount 12pt plus4pt
-
-\def\initial #1{%
-{\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
-\ifdim\lastskip<\initialskipamount
-\removelastskip \penalty-200 \vskip \initialskipamount\fi
-\line{\secbf#1\hfill}\kern 2pt\penalty10000}}
+\def\initial#1{{%
+ % Some minor font changes for the special characters.
+ \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+ %
+ % Remove any glue we may have, we'll be inserting our own.
+ \removelastskip
+ %
+ % We like breaks before the index initials, so insert a bonus.
+ \penalty -300
+ %
+ % Typeset the initial. Making this add up to a whole number of
+ % baselineskips increases the chance of the dots lining up from column
+ % to column. It still won't often be perfect, because of the stretch
+ % we need before each entry, but it's better.
+ %
+ % No shrink because it confuses \balancecolumns.
+ \vskip 1.67\baselineskip plus .5\baselineskip
+ \leftline{\secbf #1}%
+ \vskip .33\baselineskip plus .1\baselineskip
+ %
+ % Do our best not to break after the initial.
+ \nobreak
+}}
% This typesets a paragraph consisting of #1, dot leaders, and then #2
% flush to the right margin. It is used for index and table of contents
% entries. The paragraph is indented by \leftskip.
%
-\def\entry #1#2{\begingroup
+\def\entry#1#2{\begingroup
%
% Start a new paragraph if necessary, so our assignments below can't
% affect previous text.
%
% \hangafter is reset to 1 (which is the value we want) at the start
% of each paragraph, so we need not do anything with that.
- \hangindent=2em
+ \hangindent = 2em
%
% When the entry text needs to be broken, just fill out the first line
% with blank space.
\rightskip = 0pt plus1fil
%
+ % A bit of stretch before each entry for the benefit of balancing columns.
+ \vskip 0pt plus1pt
+ %
% Start a ``paragraph'' for the index entry so the line breaking
% parameters we've set above will have an effect.
\noindent
%
% Insert the text of the index entry. TeX will do line-breaking on it.
#1%
- % The following is kluged to not output a line of dots in the index if
+ % The following is kludged to not output a line of dots in the index if
% there are no page numbers. The next person who breaks this will be
% cursed by a Unix daemon.
\def\tempa{{\rm }}%
% The `\ ' here is removed by the implicit \unskip that TeX does as
% part of (the primitive) \par. Without it, a spurious underfull
% \hbox ensues.
- \ #2% The page number ends the paragraph.
+ \ifpdf
+ \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+ \else
+ \ #2% The page number ends the paragraph.
+ \fi
\fi%
\par
\endgroup}
\def\primary #1{\line{#1\hfil}}
\newskip\secondaryindent \secondaryindent=0.5cm
-
-\def\secondary #1#2{
-{\parfillskip=0in \parskip=0in
-\hangindent =1in \hangafter=1
-\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par
+\def\secondary#1#2{{%
+ \parfillskip=0in
+ \parskip=0in
+ \hangindent=1in
+ \hangafter=1
+ \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+ \ifpdf
+ \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+ \else
+ #2
+ \fi
+ \par
}}
-%% Define two-column mode, which is used in indexes.
-%% Adapted from the TeXbook, page 416.
-\catcode `\@=11
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
\newbox\partialpage
-
\newdimen\doublecolumnhsize
-\def\begindoublecolumns{\begingroup
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
% Grab any single-column material above us.
- \output = {\global\setbox\partialpage
- =\vbox{\unvbox255\kern -\topskip \kern \baselineskip}}%
- \eject
+ \output = {%
+ %
+ % Here is a possibility not foreseen in manmac: if we accumulate a
+ % whole lot of material, we might end up calling this \output
+ % routine twice in a row (see the doublecol-lose test, which is
+ % essentially a couple of indexes with @setchapternewpage off). In
+ % that case we just ship out what is in \partialpage with the normal
+ % output routine. Generally, \partialpage will be empty when this
+ % runs and this will be a no-op. See the indexspread.tex test case.
+ \ifvoid\partialpage \else
+ \onepageout{\pagecontents\partialpage}%
+ \fi
+ %
+ \global\setbox\partialpage = \vbox{%
+ % Unvbox the main output page.
+ \unvbox\PAGE
+ \kern-\topskip \kern\baselineskip
+ }%
+ }%
+ \eject % run that output routine to set \partialpage
%
- % Now switch to the double-column output routine.
- \output={\doublecolumnout}%
+ % Use the double-column output routine for subsequent pages.
+ \output = {\doublecolumnout}%
%
% Change the page size parameters. We could do this once outside this
% routine, in each of @smallbook, @afourpaper, and the default 8.5x11
% format, but then we repeat the same computation. Repeating a couple
% of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it once.
+ % execution time, so we may as well do it in one place.
%
% First we halve the line length, less a little for the gutter between
% the columns. We compute the gutter based on the line length, so it
% changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +- <
- % 1pt) as it did when we hard-coded it.
+ % below is chosen so that the gutter has the same value (well, +-<1pt)
+ % as it did when we hard-coded it.
%
% We put the result in a separate register, \doublecolumhsize, so we
% can restore it in \pagesofar, after \hsize itself has (potentially)
% Double the \vsize as well. (We don't need a separate register here,
% since nobody clobbers \vsize.)
\vsize = 2\vsize
- \doublecolumnpagegoal
}
-\def\enddoublecolumns{\eject \endgroup \pagegoal=\vsize \unvbox\partialpage}
-
-\def\doublecolumnsplit{\splittopskip=\topskip \splitmaxdepth=\maxdepth
- \global\dimen@=\pageheight \global\advance\dimen@ by-\ht\partialpage
- \global\setbox1=\vsplit255 to\dimen@ \global\setbox0=\vbox{\unvbox1}
- \global\setbox3=\vsplit255 to\dimen@ \global\setbox2=\vbox{\unvbox3}
- \ifdim\ht0>\dimen@ \setbox255=\vbox{\unvbox0\unvbox2} \global\setbox255=\copy5 \fi
- \ifdim\ht2>\dimen@ \setbox255=\vbox{\unvbox0\unvbox2} \global\setbox255=\copy5 \fi
+% The double-column output routine for all double-column pages except
+% the last.
+%
+\def\doublecolumnout{%
+ \splittopskip=\topskip \splitmaxdepth=\maxdepth
+ % Get the available space for the double columns -- the normal
+ % (undoubled) page height minus any material left over from the
+ % previous page.
+ \dimen@ = \vsize
+ \divide\dimen@ by 2
+ \advance\dimen@ by -\ht\partialpage
+ %
+ % box0 will be the left-hand column, box2 the right.
+ \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+ \onepageout\pagesofar
+ \unvbox255
+ \penalty\outputpenalty
}
-\def\doublecolumnpagegoal{%
- \dimen@=\vsize \advance\dimen@ by-2\ht\partialpage \global\pagegoal=\dimen@
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+ \unvbox\partialpage
+ %
+ \hsize = \doublecolumnhsize
+ \wd0=\hsize \wd2=\hsize
+ \hbox to\pagewidth{\box0\hfil\box2}%
}
-\def\pagesofar{\unvbox\partialpage %
- \hsize=\doublecolumnhsize % have to restore this since output routine
- \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}}
-\def\doublecolumnout{%
- \setbox5=\copy255
- {\vbadness=10000 \doublecolumnsplit}
- \ifvbox255
- \setbox0=\vtop to\dimen@{\unvbox0}
- \setbox2=\vtop to\dimen@{\unvbox2}
- \onepageout\pagesofar \unvbox255 \penalty\outputpenalty
- \else
- \setbox0=\vbox{\unvbox5}
- \ifvbox0
- \dimen@=\ht0 \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip
- \divide\dimen@ by2 \splittopskip=\topskip \splitmaxdepth=\maxdepth
- {\vbadness=10000
- \loop \global\setbox5=\copy0
- \setbox1=\vsplit5 to\dimen@
- \setbox3=\vsplit5 to\dimen@
- \ifvbox5 \global\advance\dimen@ by1pt \repeat
- \setbox0=\vbox to\dimen@{\unvbox1}
- \setbox2=\vbox to\dimen@{\unvbox3}
- \global\setbox\partialpage=\vbox{\pagesofar}
- \doublecolumnpagegoal
- }
- \fi
- \fi
+%
+% All done with double columns.
+\def\enddoublecolumns{%
+ \output = {%
+ % Split the last of the double-column material. Leave it on the
+ % current page, no automatic page break.
+ \balancecolumns
+ %
+ % If we end up splitting too much material for the current page,
+ % though, there will be another page break right after this \output
+ % invocation ends. Having called \balancecolumns once, we do not
+ % want to call it again. Therefore, reset \output to its normal
+ % definition right away. (We hope \balancecolumns will never be
+ % called on to balance too much material, but if it is, this makes
+ % the output somewhat more palatable.)
+ \global\output = {\onepageout{\pagecontents\PAGE}}%
+ }%
+ \eject
+ \endgroup % started in \begindoublecolumns
+ %
+ % \pagegoal was set to the doubled \vsize above, since we restarted
+ % the current page. We're now back to normal single-column
+ % typesetting, so reset \pagegoal to the normal \vsize (after the
+ % \endgroup where \vsize got restored).
+ \pagegoal = \vsize
}
+%
+% Called at the end of the double column material.
+\def\balancecolumns{%
+ \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+ \dimen@ = \ht0
+ \advance\dimen@ by \topskip
+ \advance\dimen@ by-\baselineskip
+ \divide\dimen@ by 2 % target to split to
+ %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
+ \splittopskip = \topskip
+ % Loop until we get a decent breakpoint.
+ {%
+ \vbadness = 10000
+ \loop
+ \global\setbox3 = \copy0
+ \global\setbox1 = \vsplit3 to \dimen@
+ \ifdim\ht3>\dimen@
+ \global\advance\dimen@ by 1pt
+ \repeat
+ }%
+ %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
+ \setbox0=\vbox to\dimen@{\unvbox1}%
+ \setbox2=\vbox to\dimen@{\unvbox3}%
+ %
+ \pagesofar
+}
+\catcode`\@ = \other
-\catcode `\@=\other
-\message{sectioning,}
-% Define chapters, sections, etc.
-\newcount \chapno
-\newcount \secno \secno=0
-\newcount \subsecno \subsecno=0
-\newcount \subsubsecno \subsubsecno=0
+\message{sectioning,}
+% Chapters, sections, etc.
+
+% \unnumberedno is an oxymoron, of course. But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number". We avoid collisions with chapter
+% numbers by starting them at 10000. (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno \secno=0
+\newcount\subsecno \subsecno=0
+\newcount\subsubsecno \subsubsecno=0
% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount \appendixno \appendixno = `\@
-\def\appendixletter{\char\the\appendixno}
-
-\newwrite \contentsfile
-% This is called from \setfilename.
-\def\opencontents{\openout \contentsfile = \jobname.toc}
+\newcount\appendixno \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+ \ifnum\appendixno=`A A%
+ \else\ifnum\appendixno=`B B%
+ \else\ifnum\appendixno=`C C%
+ \else\ifnum\appendixno=`D D%
+ \else\ifnum\appendixno=`E E%
+ \else\ifnum\appendixno=`F F%
+ \else\ifnum\appendixno=`G G%
+ \else\ifnum\appendixno=`H H%
+ \else\ifnum\appendixno=`I I%
+ \else\ifnum\appendixno=`J J%
+ \else\ifnum\appendixno=`K K%
+ \else\ifnum\appendixno=`L L%
+ \else\ifnum\appendixno=`M M%
+ \else\ifnum\appendixno=`N N%
+ \else\ifnum\appendixno=`O O%
+ \else\ifnum\appendixno=`P P%
+ \else\ifnum\appendixno=`Q Q%
+ \else\ifnum\appendixno=`R R%
+ \else\ifnum\appendixno=`S S%
+ \else\ifnum\appendixno=`T T%
+ \else\ifnum\appendixno=`U U%
+ \else\ifnum\appendixno=`V V%
+ \else\ifnum\appendixno=`W W%
+ \else\ifnum\appendixno=`X X%
+ \else\ifnum\appendixno=`Y Y%
+ \else\ifnum\appendixno=`Z Z%
+ % The \the is necessary, despite appearances, because \appendixletter is
+ % expanded while writing the .toc file. \char\appendixno is not
+ % expandable, thus it is written literally, thus all appendixes come out
+ % with the same letter (or @) in the toc without it.
+ \else\char\the\appendixno
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+ \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise
-
-\def\thischapter{} \def\thissection{}
-\def\seccheck#1{\if \pageno<0 %
-\errmessage{@#1 not allowed after generating table of contents}\fi
-%
-}
-
-\def\chapternofonts{%
-\let\rawbackslash=\relax%
-\let\frenchspacing=\relax%
-\def\result{\realbackslash result}
-\def\equiv{\realbackslash equiv}
-\def\expansion{\realbackslash expansion}
-\def\print{\realbackslash print}
-\def\TeX{\realbackslash TeX}
-\def\dots{\realbackslash dots}
-\def\copyright{\realbackslash copyright}
-\def\tt{\realbackslash tt}
-\def\bf{\realbackslash bf }
-\def\w{\realbackslash w}
-\def\less{\realbackslash less}
-\def\gtr{\realbackslash gtr}
-\def\hat{\realbackslash hat}
-\def\char{\realbackslash char}
-\def\tclose##1{\realbackslash tclose {##1}}
-\def\code##1{\realbackslash code {##1}}
-\def\samp##1{\realbackslash samp {##1}}
-\def\r##1{\realbackslash r {##1}}
-\def\b##1{\realbackslash b {##1}}
-\def\key##1{\realbackslash key {##1}}
-\def\file##1{\realbackslash file {##1}}
-\def\kbd##1{\realbackslash kbd {##1}}
-% These are redefined because @smartitalic wouldn't work inside xdef.
-\def\i##1{\realbackslash i {##1}}
-\def\cite##1{\realbackslash cite {##1}}
-\def\var##1{\realbackslash var {##1}}
-\def\emph##1{\realbackslash emph {##1}}
-\def\dfn##1{\realbackslash dfn {##1}}
-}
+% page headings and footings can use it. @section does likewise.
+% However, they are not reliable, because we don't use marks.
+\def\thischapter{}
+\def\thissection{}
\newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raise/lowersections modify this count
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
% @raisesections: treat @section as chapter, @subsection as section, etc.
\def\raisesections{\global\advance\secbase by -1}
% #2 is text for heading
\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
\ifcase\absseclevel
- \chapterzzz{#2}
-\or
- \seczzz{#2}
-\or
- \numberedsubseczzz{#2}
-\or
- \numberedsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \chapterzzz{#2}
+ \chapterzzz{#2}%
+ \or \seczzz{#2}%
+ \or \numberedsubseczzz{#2}%
+ \or \numberedsubsubseczzz{#2}%
\else
- \numberedsubsubseczzz{#2}
+ \ifnum \absseclevel<0 \chapterzzz{#2}%
+ \else \numberedsubsubseczzz{#2}%
+ \fi
\fi
-\fi
+ \suppressfirstparagraphindent
}
% like \numhead, but chooses appendix heading levels
\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
\ifcase\absseclevel
- \appendixzzz{#2}
-\or
- \appendixsectionzzz{#2}
-\or
- \appendixsubseczzz{#2}
-\or
- \appendixsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \appendixzzz{#2}
+ \appendixzzz{#2}%
+ \or \appendixsectionzzz{#2}%
+ \or \appendixsubseczzz{#2}%
+ \or \appendixsubsubseczzz{#2}%
\else
- \appendixsubsubseczzz{#2}
+ \ifnum \absseclevel<0 \appendixzzz{#2}%
+ \else \appendixsubsubseczzz{#2}%
+ \fi
\fi
-\fi
+ \suppressfirstparagraphindent
}
% like \numhead, but chooses numberless heading levels
\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \unnumberedzzz{#2}
-\or
- \unnumberedseczzz{#2}
-\or
- \unnumberedsubseczzz{#2}
-\or
- \unnumberedsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \unnumberedzzz{#2}
+ \ifcase\absseclevel
+ \unnumberedzzz{#2}%
+ \or \unnumberedseczzz{#2}%
+ \or \unnumberedsubseczzz{#2}%
+ \or \unnumberedsubsubseczzz{#2}%
\else
- \unnumberedsubsubseczzz{#2}
+ \ifnum \absseclevel<0 \unnumberedzzz{#2}%
+ \else \unnumberedsubsubseczzz{#2}%
+ \fi
\fi
-\fi
+ \suppressfirstparagraphindent
}
-
-\def\thischaptername{No Chapter Title}
+% @chapter, @appendix, @unnumbered.
+%
\outer\def\chapter{\parsearg\chapteryyy}
-\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz #1{\seccheck{chapter}%
-\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \chapno by 1 \message{\putwordChapter \the\chapno}%
-\chapmacro {#1}{\the\chapno}%
-\gdef\thissection{#1}%
-\gdef\thischaptername{#1}%
-% We don't substitute the actual chapter name into \thischapter
-% because we don't want its macros evaluated now.
-\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
-{\chapternofonts%
-\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\donoderef %
-\global\let\section = \numberedsec
-\global\let\subsection = \numberedsubsec
-\global\let\subsubsection = \numberedsubsubsec
-}}
+\def\chapteryyy#1{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+ \secno=0 \subsecno=0 \subsubsecno=0 \advance\chapno by 1
+ \message{\putwordChapter\space \the\chapno}%
+ %
+ % Write the actual heading.
+ \chapmacro{#1}{Ynumbered}{\the\chapno}%
+ %
+ % So @section and the like are numbered underneath this chapter.
+ \global\let\section = \numberedsec
+ \global\let\subsection = \numberedsubsec
+ \global\let\subsubsection = \numberedsubsubsec
+}
\outer\def\appendix{\parsearg\appendixyyy}
-\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz #1{\seccheck{appendix}%
-\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \appendixno by 1 \message{Appendix \appendixletter}%
-\chapmacro {#1}{\putwordAppendix{} \appendixletter}%
-\gdef\thissection{#1}%
-\gdef\thischaptername{#1}%
-\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
-{\chapternofonts%
-\edef\temp{{\realbackslash chapentry
- {#1}{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\appendixnoderef %
-\global\let\section = \appendixsec
-\global\let\subsection = \appendixsubsec
-\global\let\subsubsection = \appendixsubsubsec
-}}
+\def\appendixyyy#1{\apphead0{#1}} % normally apphead0 calls appendixzzz
+\def\appendixzzz#1{%
+ \secno=0 \subsecno=0 \subsubsecno=0 \advance\appendixno by 1
+ \def\appendixnum{\putwordAppendix\space \appendixletter}%
+ \message{\appendixnum}%
+ \chapmacro{#1}{Yappendix}{\appendixletter}%
+ \global\let\section = \appendixsec
+ \global\let\subsection = \appendixsubsec
+ \global\let\subsubsection = \appendixsubsubsec
+}
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\def\centerchap{\parsearg\centerchapyyy}
+\def\centerchapyyy#1{{\unnumberedyyy{#1}}}
+
+% @top is like @unnumbered.
\outer\def\top{\parsearg\unnumberedyyy}
+
\outer\def\unnumbered{\parsearg\unnumberedyyy}
-\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz #1{\seccheck{unnumbered}%
-\secno=0 \subsecno=0 \subsubsecno=0
-%
-% This used to be simply \message{#1}, but TeX fully expands the
-% argument to \message. Therefore, if #1 contained @-commands, TeX
-% expanded them. For example, in `@unnumbered The @cite{Book}', TeX
-% expanded @cite (which turns out to cause errors because \cite is meant
-% to be executed, not expanded).
-%
-% Anyway, we don't want the fully-expanded definition of @cite to appear
-% as a result of the \message, we just want `@cite' itself. We use
-% \the<toks register> to achieve this: TeX expands \the<toks> only once,
-% simply yielding the contents of the <toks register>.
-\toks0 = {#1}\message{(\the\toks0)}%
-%
-\unnumbchapmacro {#1}%
-\gdef\thischapter{#1}\gdef\thissection{#1}%
-{\chapternofonts%
-\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\global\let\section = \unnumberedsec
-\global\let\subsection = \unnumberedsubsec
-\global\let\subsubsection = \unnumberedsubsubsec
-}}
+\def\unnumberedyyy#1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
+\def\unnumberedzzz#1{%
+ \secno=0 \subsecno=0 \subsubsecno=0 \advance\unnumberedno by 1
+ %
+ % This used to be simply \message{#1}, but TeX fully expands the
+ % argument to \message. Therefore, if #1 contained @-commands, TeX
+ % expanded them. For example, in `@unnumbered The @cite{Book}', TeX
+ % expanded @cite (which turns out to cause errors because \cite is meant
+ % to be executed, not expanded).
+ %
+ % Anyway, we don't want the fully-expanded definition of @cite to appear
+ % as a result of the \message, we just want `@cite' itself. We use
+ % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+ % simply yielding the contents of <toks register>. (We also do this for
+ % the toc entries.)
+ \toks0 = {#1}\message{(\the\toks0)}%
+ %
+ \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+ %
+ \global\let\section = \unnumberedsec
+ \global\let\subsection = \unnumberedsubsec
+ \global\let\subsubsection = \unnumberedsubsubsec
+}
+% Sections.
\outer\def\numberedsec{\parsearg\secyyy}
-\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
-\def\seczzz #1{\seccheck{section}%
-\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
-{\chapternofonts%
-\edef\temp{{\realbackslash secentry %
-{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\donoderef %
-\penalty 10000 %
-}}
+\def\secyyy#1{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+ \subsecno=0 \subsubsecno=0 \advance\secno by 1
+ \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
-\outer\def\appenixsection{\parsearg\appendixsecyyy}
+\outer\def\appendixsection{\parsearg\appendixsecyyy}
\outer\def\appendixsec{\parsearg\appendixsecyyy}
-\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz #1{\seccheck{appendixsection}%
-\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
-{\chapternofonts%
-\edef\temp{{\realbackslash secentry %
-{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\appendixnoderef %
-\penalty 10000 %
-}}
+\def\appendixsecyyy#1{\apphead1{#1}} % normally calls appendixsectionzzz
+\def\appendixsectionzzz#1{%
+ \subsecno=0 \subsubsecno=0 \advance\secno by 1
+ \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
-\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz #1{\seccheck{unnumberedsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
-{\chapternofonts%
-\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
-}}
+\def\unnumberedsecyyy#1{\unnmhead1{#1}} % normally calls unnumberedseczzz
+\def\unnumberedseczzz#1{%
+ \subsecno=0 \subsubsecno=0 \advance\secno by 1
+ \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+% Subsections.
\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
-\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz #1{\seccheck{subsection}%
-\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
-{\chapternofonts%
-\edef\temp{{\realbackslash subsecentry %
-{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\donoderef %
-\penalty 10000 %
-}}
+\def\numberedsubsecyyy#1{\numhead2{#1}} % normally calls numberedsubseczzz
+\def\numberedsubseczzz#1{%
+ \subsubsecno=0 \advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
-\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz #1{\seccheck{appendixsubsec}%
-\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
-{\chapternofonts%
-\edef\temp{{\realbackslash subsecentry %
-{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\appendixnoderef %
-\penalty 10000 %
-}}
+\def\appendixsubsecyyy#1{\apphead2{#1}} % normally calls appendixsubseczzz
+\def\appendixsubseczzz#1{%
+ \subsubsecno=0 \advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Yappendix}%
+ {\appendixletter.\the\secno.\the\subsecno}%
+}
\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
-\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
-{\chapternofonts%
-\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
-}}
+\def\unnumberedsubsecyyy#1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
+\def\unnumberedsubseczzz#1{%
+ \subsubsecno=0 \advance\subsecno by 1
+ \sectionheading{#1}{subsec}{Ynothing}%
+ {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+% Subsubsections.
\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
-\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz #1{\seccheck{subsubsection}%
-\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-\subsubsecheading {#1}
- {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-{\chapternofonts%
-\edef\temp{{\realbackslash subsubsecentry %
- {#1}
- {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
- {\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\donoderef %
-\penalty 10000 %
-}}
+\def\numberedsubsubsecyyy#1{\numhead3{#1}} % normally numberedsubsubseczzz
+\def\numberedsubsubseczzz#1{%
+ \advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Ynumbered}%
+ {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
-\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}%
-\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-\subsubsecheading {#1}
- {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-{\chapternofonts%
-\edef\temp{{\realbackslash subsubsecentry{#1}%
- {\appendixletter}
- {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\appendixnoderef %
-\penalty 10000 %
-}}
+\def\appendixsubsubsecyyy#1{\apphead3{#1}} % normally appendixsubsubseczzz
+\def\appendixsubsubseczzz#1{%
+ \advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Yappendix}%
+ {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
-\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}%
-\plainsecheading {#1}\gdef\thissection{#1}%
-{\chapternofonts%
-\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}%
-\escapechar=`\\%
-\write \contentsfile \temp %
-\unnumbnoderef %
-\penalty 10000 %
-}}
+\def\unnumberedsubsubsecyyy#1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
+\def\unnumberedsubsubseczzz#1{%
+ \advance\subsubsecno by 1
+ \sectionheading{#1}{subsubsec}{Ynothing}%
+ {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
% These are variants which are not "outer", so they can appear in @ifinfo.
-% Actually, they should now be obsolete; ordinary section commands should work.
+% Actually, they are now be obsolete; ordinary section commands should work.
\def\infotop{\parsearg\unnumberedzzz}
\def\infounnumbered{\parsearg\unnumberedzzz}
\def\infounnumberedsec{\parsearg\unnumberedseczzz}
% These macros control what the section commands do, according
% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
% Define them by default for a numbered chapter.
-\global\let\section = \numberedsec
-\global\let\subsection = \numberedsubsec
-\global\let\subsubsection = \numberedsubsubsec
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
% Define @majorheading, @heading and @subheading
-% NOTE on use of \vbox for chapter headings, section headings, and
-% such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
+% NOTE on use of \vbox for chapter headings, section headings, and such:
+% 1) We use \vbox rather than the earlier \line to permit
+% overlong headings to fold.
+% 2) \hyphenpenalty is set to 10000 because hyphenation in a
+% heading is obnoxious; this forbids it.
% 3) Likewise, headings look best if no \parindent is used, and
% if justification is not attempted. Hence \raggedright.
-\def\majorheading{\parsearg\majorheadingzzz}
-\def\majorheadingzzz #1{%
-{\advance\chapheadingskip by 10pt \chapbreak }%
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 200}
-
-\def\chapheading{\parsearg\chapheadingzzz}
-\def\chapheadingzzz #1{\chapbreak %
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 200}
-
-\def\heading{\parsearg\secheadingi}
+\def\majorheading{%
+ {\advance\chapheadingskip by 10pt \chapbreak }%
+ \parsearg\chapheadingzzz
+}
-\def\subheading{\parsearg\subsecheadingi}
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+ {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt\raggedright
+ \rm #1\hfill}}%
+ \bigskip \par\penalty 200\relax
+ \suppressfirstparagraphindent
+}
-\def\subsubheading{\parsearg\subsubsecheadingi}
+% @heading, @subheading, @subsubheading.
+\def\heading{\parsearg\doheading}
+\def\subheading{\parsearg\dosubheading}
+\def\subsubheading{\parsearg\dosubsubheading}
+\def\doheading#1{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
+\def\dosubheading#1{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
+\def\dosubsubheading#1{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+ \suppressfirstparagraphindent}
% These macros generate a chapter, section, etc. heading only
% (including whitespace, linebreaking, etc. around it),
%%% Define plain chapter starts, and page on/off switching for it
% Parameter controlling skip before chapter headings (if needed)
-\newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt
+\newskip\chapheadingskip
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
\def\chappager{\par\vfill\supereject}
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-\def\CHAPPAGoff{
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
\global\let\pchapsepmacro=\chapbreak
\global\let\pagealignmacro=\chappager}
-\def\CHAPPAGon{
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
\global\let\pchapsepmacro=\chappager
\global\let\pagealignmacro=\chappager
\global\def\HEADINGSon{\HEADINGSsingle}}
-\def\CHAPPAGodd{
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
\global\let\pchapsepmacro=\chapoddpage
\global\let\pagealignmacro=\chapoddpage
\global\def\HEADINGSon{\HEADINGSdouble}}
\CHAPPAGon
-\def\CHAPFplain{
+\def\CHAPFplain{%
\global\let\chapmacro=\chfplain
-\global\let\unnumbchapmacro=\unnchfplain}
+\global\let\centerchapmacro=\centerchfplain}
-\def\chfplain #1#2{%
+% Normal chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+\def\Yappendixkeyword{Yappendix}
+%
+\def\chfplain#1#2#3{%
\pchapsepmacro
{%
- \chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #2\enspace #1}%
+ \chapfonts \rm
+ %
+ % Have to define \thissection before calling \donoderef, because the
+ % xref code eventually uses it, as \Ytitle. On the other hand, it
+ % has to be called after \pchapsepmacro, or the headline will change
+ % too soon.
+ \gdef\thissection{#1}%
+ \gdef\thischaptername{#1}%
+ %
+ % Only insert the separating space if we have a chapter/appendix
+ % number, and don't print the unnumbered ``number''.
+ \def\temptype{#2}%
+ \ifx\temptype\Ynothingkeyword
+ \setbox0 = \hbox{}%
+ \def\toctype{unnchap}%
+ \def\thischapter{#1}%
+ \else\ifx\temptype\Yomitfromtockeyword
+ \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+ \def\toctype{omit}%
+ \xdef\thischapter{}%
+ \else\ifx\temptype\Yappendixkeyword
+ \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+ \def\toctype{app}%
+ % We don't substitute the actual chapter name into \thischapter
+ % because we don't want its macros evaluated now. And we don't
+ % use \thissection because that changes with each section.
+ %
+ \xdef\thischapter{\putwordAppendix{} \appendixletter:
+ \noexpand\thischaptername}%
+ \else
+ \setbox0 = \hbox{#3\enspace}%
+ \def\toctype{numchap}%
+ \xdef\thischapter{\putwordChapter{} \the\chapno:
+ \noexpand\thischaptername}%
+ \fi\fi\fi
+ %
+ % Write the toc entry for this chapter. Must come before the
+ % \donoderef, because we include the current node name in the toc
+ % entry, and \donoderef resets it to empty.
+ \writetocentry{\toctype}{#1}{#3}%
+ %
+ % For pdftex, we have to write out the node definition (aka, make
+ % the pdfdest) after any page break, but before the actual text has
+ % been typeset. If the destination for the pdf outline is after the
+ % text, then jumping from the outline may wind up with the text not
+ % being visible, for instance under high magnification.
+ \donoderef{#2}%
+ %
+ % Typeset the actual heading.
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \hangindent=\wd0 \centerparametersmaybe
+ \unhbox0 #1\par}%
}%
- \bigskip
- \penalty5000
+ \nobreak\bigskip % no page break after a chapter title
+ \nobreak
}
-\def\unnchfplain #1{%
-\pchapsepmacro %
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 10000 %
-}
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerchfplain#1{{%
+ \def\centerparametersmaybe{%
+ \advance\rightskip by 3\rightskip
+ \leftskip = \rightskip
+ \parfillskip = 0pt
+ }%
+ \chfplain{#1}{Ynothing}{}%
+}}
+
\CHAPFplain % The default
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff. We'll see. --karl, 11aug03.
+%
\def\unnchfopen #1{%
\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
\parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 10000 %
+ \rm #1\hfill}}\bigskip \par\nobreak
}
\def\chfopen #1#2{\chapoddpage {\chapfonts
\par\penalty 5000 %
}
-\def\CHAPFopen{
-\global\let\chapmacro=\chfopen
-\global\let\unnumbchapmacro=\unnchfopen}
-
-% Parameter controlling skip before section headings.
-
-% was 17pt plus 8pt minus 4pt
-\newskip \subsecheadingskip \subsecheadingskip = 0pt plus 4pt minus 4pt
-\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
-
-% was 21pt plus 8pt minus 4pt
-\newskip \secheadingskip \secheadingskip = 0pt plus 4pt minus 4pt
-\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
-
-% @paragraphindent is defined for the Info formatting commands only.
-\let\paragraphindent=\comment
-
-% Section fonts are the base font at magstep2, which produces
-% a size a bit more than 14 points in the default situation.
-
-\def\secheading #1#2#3{\secheadingi {#2.#3\enspace #1}}
-\def\plainsecheading #1{\secheadingi {#1}}
-\def\secheadingi #1{{\advance \secheadingskip by \parskip %
-\secheadingbreak}%
-{\secfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
-
-
-% Subsection fonts are the base font at magstep1,
-% which produces a size of 12 points.
-
-\def\subsecheading #1#2#3#4{\subsecheadingi {#2.#3.#4\enspace #1}}
-\def\subsecheadingi #1{{\advance \subsecheadingskip by \parskip %
-\subsecheadingbreak}%
-{\subsecfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 }
-
-\def\subsubsecfonts{\subsecfonts} % Maybe this should change:
- % Perhaps make sssec fonts scaled
- % magstep half
-\def\subsubsecheading #1#2#3#4#5{\subsubsecheadingi {#2.#3.#4.#5\enspace #1}}
-\def\subsubsecheadingi #1{{\advance \subsecheadingskip by \parskip %
-\subsecheadingbreak}%
-{\subsubsecfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}%
-\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000}
-
+\def\centerchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+ \parindent=0pt
+ \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
+}
+
+\def\CHAPFopen{%
+\global\let\chapmacro=\chfopen
+\global\let\centerchapmacro=\centerchfopen}
+
+
+% Section titles. These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
+% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
+% section number.
+%
+\def\sectionheading#1#2#3#4{%
+ {%
+ % Switch to the right set of fonts.
+ \csname #2fonts\endcsname \rm
+ %
+ % Insert space above the heading.
+ \csname #2headingbreak\endcsname
+ %
+ % Only insert the space after the number if we have a section number.
+ \def\sectionlevel{#2}%
+ \def\temptype{#3}%
+ %
+ \ifx\temptype\Ynothingkeyword
+ \setbox0 = \hbox{}%
+ \def\toctype{unn}%
+ \gdef\thissection{#1}%
+ \else\ifx\temptype\Yomitfromtockeyword
+ % for @headings -- no section number, don't include in toc,
+ % and don't redefine \thissection.
+ \setbox0 = \hbox{}%
+ \def\toctype{omit}%
+ \let\sectionlevel=\empty
+ \else\ifx\temptype\Yappendixkeyword
+ \setbox0 = \hbox{#4\enspace}%
+ \def\toctype{app}%
+ \gdef\thissection{#1}%
+ \else
+ \setbox0 = \hbox{#4\enspace}%
+ \def\toctype{num}%
+ \gdef\thissection{#1}%
+ \fi\fi\fi
+ %
+ % Write the toc entry (before \donoderef). See comments in \chfplain.
+ \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+ %
+ % Write the node reference (= pdf destination for pdftex).
+ % Again, see comments in \chfplain.
+ \donoderef{#3}%
+ %
+ % Output the actual section heading.
+ \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
+ \hangindent=\wd0 % zero if no section number
+ \unhbox0 #1}%
+ }%
+ % Add extra space after the heading -- half of whatever came above it.
+ % Don't allow stretch, though.
+ \kern .5 \csname #2headingskip\endcsname
+ %
+ % Do not let the kern be a potential breakpoint, as it would be if it
+ % was followed by glue.
+ \nobreak
+ %
+ % We'll almost certainly start a paragraph next, so don't let that
+ % glue accumulate. (Not a breakpoint because it's preceded by a
+ % discardable item.)
+ \vskip-\parskip
+ %
+ % This \nobreak is purely so the last item on the list is a \penalty
+ % of 10000. This is so other code, for instance \parsebodycommon, can
+ % check for and avoid allowing breakpoints. Otherwise, it would
+ % insert a valid breakpoint between:
+ % @section sec-whatever
+ % @deffn def-whatever
+ \nobreak
+}
+
-\message{toc printing,}
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
-% Finish up the main text and prepare to read what we've written
-% to \contentsfile.
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this. The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything. This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+ \edef\writetoctype{#1}%
+ \ifx\writetoctype\omitkeyword \else
+ \iftocfileopened\else
+ \immediate\openout\tocfile = \jobname.toc
+ \global\tocfileopenedtrue
+ \fi
+ %
+ \iflinks
+ \toks0 = {#2}%
+ \toks2 = \expandafter{\lastnode}%
+ \edef\temp{\write\tocfile{\realbackslash #1entry{\the\toks0}{#3}%
+ {\the\toks2}{\noexpand\folio}}}%
+ \temp
+ \fi
+ \fi
+ %
+ % Tell \shipout to create a pdf destination on each page, if we're
+ % writing pdf. These are used in the table of contents. We can't
+ % just write one on every page because the title pages are numbered
+ % 1 and 2 (the page numbers aren't printed), and so are the first
+ % two pages of the document. Thus, we'd have two destinations named
+ % `1', and two named `2'.
+ \ifpdf \global\pdfmakepagedesttrue \fi
+}
\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
\def\startcontents#1{%
- \pagealignmacro
- \immediate\closeout \contentsfile
- \ifnum \pageno>0
- \pageno = -1 % Request roman numbered pages.
- \fi
+ % If @setchapternewpage on, and @headings double, the contents should
+ % start on an odd page, unlike chapters. Thus, we maintain
+ % \contentsalignmacro in parallel with \pagealignmacro.
+ % From: Torbjorn Granlund <tege@matematik.su.se>
+ \contentsalignmacro
+ \immediate\closeout\tocfile
+ %
% Don't need to put `Contents' or `Short Contents' in the headline.
% It is abundantly clear what they are.
- \unnumbchapmacro{#1}\def\thischapter{}%
- \begingroup % Set up to handle contents files properly.
+ \def\thischapter{}%
+ \chapmacro{#1}{Yomitfromtoc}{}%
+ %
+ \savepageno = \pageno
+ \begingroup % Set up to handle contents files properly.
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
- \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
+ % We can't do this, because then an actual ^ in a section
+ % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
+ %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
\raggedbottom % Worry more about breakpoints than the bottom.
\advance\hsize by -\contentsrightmargin % Don't use the full line length.
+ %
+ % Roman numerals for page numbers.
+ \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
}
% Normal (long) toc.
-\outer\def\contents{%
- \startcontents{\putwordTableofContents}%
- \input \jobname.toc
+\def\contents{%
+ \startcontents{\putwordTOC}%
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.toc
+ \fi
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
+ \pdfmakeoutlines
\endgroup
- \vfill \eject
+ \lastnegativepageno = \pageno
+ \global\pageno = \savepageno
}
% And just the chapters.
-\outer\def\summarycontents{%
- \startcontents{\putwordShortContents}%
+\def\summarycontents{%
+ \startcontents{\putwordShortTOC}%
%
- \let\chapentry = \shortchapentry
- \let\unnumbchapentry = \shortunnumberedentry
+ \let\numchapentry = \shortchapentry
+ \let\appentry = \shortchapentry
+ \let\unnchapentry = \shortunnchapentry
% We want a true roman here for the page numbers.
\secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
+ \let\rm=\shortcontrm \let\bf=\shortcontbf
+ \let\sl=\shortcontsl \let\tt=\shortconttt
\rm
+ \hyphenpenalty = 10000
\advance\baselineskip by 1pt % Open it up a little.
- \def\secentry ##1##2##3##4{}
- \def\unnumbsecentry ##1##2{}
- \def\subsecentry ##1##2##3##4##5{}
- \def\unnumbsubsecentry ##1##2{}
- \def\subsubsecentry ##1##2##3##4##5##6{}
- \def\unnumbsubsubsecentry ##1##2{}
- \input \jobname.toc
+ \def\numsecentry##1##2##3##4{}
+ \let\appsecentry = \numsecentry
+ \let\unnsecentry = \numsecentry
+ \let\numsubsecentry = \numsecentry
+ \let\appsubsecentry = \numsecentry
+ \let\unnsubsecentry = \numsecentry
+ \let\numsubsubsecentry = \numsecentry
+ \let\appsubsubsecentry = \numsecentry
+ \let\unnsubsubsecentry = \numsecentry
+ \openin 1 \jobname.toc
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.toc
+ \fi
+ \vfill \eject
+ \contentsalignmacro % in case @setchapternewpage odd is in effect
\endgroup
- \vfill \eject
+ \lastnegativepageno = \pageno
+ \global\pageno = \savepageno
}
\let\shortcontents = \summarycontents
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+ % This space should be enough, since a single number is .5em, and the
+ % widest letter (M) is 1em, at least in the Computer Modern fonts.
+ % But use \hss just in case.
+ % (This space doesn't include the extra space that gets added after
+ % the label; that gets put in by \shortchapentry above.)
+ %
+ % We'd like to right-justify chapter numbers, but that looks strange
+ % with appendix letters. And right-justifying numbers and
+ % left-justifying letters looks strange when there is less than 10
+ % chapters. Have to read the whole toc once to know how many chapters
+ % there are before deciding ...
+ \hbox to 1em{#1\hss}%
+}
+
% These macros generate individual entries in the table of contents.
% The first argument is the chapter or section name.
% The last argument is the page number.
% The arguments in between are the chapter number, section number, ...
-% Chapter-level things, for both the long and short contents.
-\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
-
-% See comments in \dochapentry re vbox and related settings
-\def\shortchapentry#1#2#3{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}%
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+%
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+ \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
}
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter.
-% We could simplify the code here by writing out an \appendixentry
-% command in the toc file for appendices, instead of using \chapentry
-% for both, but it doesn't seem worth it.
-\setbox0 = \hbox{\shortcontrm \putwordAppendix }
-\newdimen\shortappendixwidth \shortappendixwidth = \wd0
-
-\def\shortchaplabel#1{%
- % We typeset #1 in a box of constant width, regardless of the text of
- % #1, so the chapter titles will come out aligned.
- \setbox0 = \hbox{#1}%
- \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi
- %
- % This space should be plenty, since a single number is .5em, and the
- % widest letter (M) is 1em, at least in the Computer Modern fonts.
- % (This space doesn't include the extra space that gets added after
- % the label; that gets put in in \shortchapentry above.)
- \advance\dimen0 by 1.1em
- \hbox to \dimen0{#1\hfil}%
-}
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+ % We use M since it's probably the widest letter.
+ \setbox0 = \hbox{\putwordAppendix{} M}%
+ \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
-\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
-\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}}
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
% Sections.
-\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
-\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
% Subsections.
-\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
-\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}}
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
% And subsubsections.
-\def\subsubsecentry#1#2#3#4#5#6{%
- \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
-\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
-
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
% This parameter controls the indentation of the various levels.
-\newdimen\tocindent \tocindent = 3pc
+\newdimen\tocindent \tocindent = 2pc
% Now for the actual typesetting. In all these, #1 is the text and #2 is the
% page number.
%
-% If the toc has to be broken over pages, we would want to be at chapters
+% If the toc has to be broken over pages, we want it to be at chapters
% if at all possible; hence the \penalty.
\def\dochapentry#1#2{%
- \penalty-300 \vskip\baselineskip
+ \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
\begingroup
\chapentryfonts
- \tocentry{#1}{\dopageno{#2}}%
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup
- \nobreak\vskip .25\baselineskip
+ \nobreak\vskip .25\baselineskip plus.1\baselineskip
}
\def\dosecentry#1#2{\begingroup
\secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno{#2}}%
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup}
\def\dosubsecentry#1#2{\begingroup
\subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno{#2}}%
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup}
\def\dosubsubsecentry#1#2{\begingroup
\subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno{#2}}%
+ \tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup}
% Final typesetting of a toc entry; we use the same \entry macro as for
% the index entries, but we want to suppress hyphenation here. (We
% can't do that in the \entry macro, since index entries might consist
% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
-%
\def\tocentry#1#2{\begingroup
- \hyphenpenalty = 10000
+ \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
+ % Do not use \turnoffactive in these arguments. Since the toc is
+ % typeset in cmr, characters such as _ would come out wrong; we
+ % have to do the usual translation tricks.
\entry{#1}{#2}%
\endgroup}
\def\chapentryfonts{\secfonts \rm}
\def\secentryfonts{\textfonts}
-\let\subsecentryfonts = \textfonts
-\let\subsubsecentryfonts = \textfonts
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
\message{environments,}
+% @foo ... @end foo.
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
% Since these characters are used in examples, it should be an even number of
% \tt widths. Each \tt character is 1en, so two makes it 1em.
-% Furthermore, these definitions must come after we define our fonts.
-\newbox\dblarrowbox \newbox\longdblarrowbox
-\newbox\pushcharbox \newbox\bullbox
-\newbox\equivbox \newbox\errorbox
-
-\let\ptexequiv = \equiv
-
-%{\tentt
-%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
-%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
-%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
-%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
-% Adapted from the manmac format (p.420 of TeXbook)
-%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
-% depth .1ex\hfil}
-%}
-
+%
\def\point{$\star$}
-
\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-
\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+% The @error{} command.
% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
{\tentt \global\dimen0 = 3em}% Width of the box.
\dimen2 = .55pt % Thickness of rules
% The text. (`r' is open on the right, `e' somewhat less so on the left.)
\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
-
+%
\global\setbox\errorbox=\hbox to \dimen0{\hfil
\hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
\advance\hsize by -2\dimen2 % Rules.
\kern3pt\vrule width\dimen2}% Space to right.
\hrule height\dimen2}
\hfil}
-
-% The @error{} command.
+%
\def\error{\leavevmode\lower.7ex\copy\errorbox}
% @tex ... @end tex escapes into raw Tex temporarily.
% But \@ or @@ will get a plain tex @ character.
\def\tex{\begingroup
-\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
-\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
-\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
-\catcode `\%=14
-\catcode 43=12
-\catcode`\"=12
-\catcode`\==12
-\catcode`\|=12
-\catcode`\<=12
-\catcode`\>=12
-\escapechar=`\\
-%
-\let\~=\ptextilde
-\let\{=\ptexlbrace
-\let\}=\ptexrbrace
-\let\.=\ptexdot
-\let\*=\ptexstar
-\let\dots=\ptexdots
-\def\@{@}%
-\let\bullet=\ptexbullet
-\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl
-\let\L=\ptexL
-%
+ \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+ \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+ \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+ \catcode `\%=14
+ \catcode `\+=\other
+ \catcode `\"=\other
+ \catcode `\==\other
+ \catcode `\|=\other
+ \catcode `\<=\other
+ \catcode `\>=\other
+ \escapechar=`\\
+ %
+ \let\b=\ptexb
+ \let\bullet=\ptexbullet
+ \let\c=\ptexc
+ \let\,=\ptexcomma
+ \let\.=\ptexdot
+ \let\dots=\ptexdots
+ \let\equiv=\ptexequiv
+ \let\!=\ptexexclam
+ \let\i=\ptexi
+ \let\indent=\ptexindent
+ \let\noindent=\ptexnoindent
+ \let\{=\ptexlbrace
+ \let\+=\tabalign
+ \let\}=\ptexrbrace
+ \let\/=\ptexslash
+ \let\*=\ptexstar
+ \let\t=\ptext
+ %
+ \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+ \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+ \def\@{@}%
\let\Etex=\endgroup}
-% Define @lisp ... @endlisp.
+% Define @lisp ... @end lisp.
% @lisp does a \begingroup so it can rebind things,
-% including the definition of @endlisp (which normally is erroneous).
+% including the definition of @end lisp (which normally is erroneous).
% Amount to narrow the margins by for @lisp.
\newskip\lispnarrowing \lispnarrowing=0.4in
% Make spacing and below environment symmetrical. We use \parskip here
% to help in doing that, since in @example-like environments \parskip
% is reset to zero; thus the \afterenvbreak inserts no space -- but the
-% start of the next paragraph will insert \parskip
+% start of the next paragraph will insert \parskip.
%
-\def\aboveenvbreak{{\advance\envskipamount by \parskip
-\endgraf \ifdim\lastskip<\envskipamount
-\removelastskip \penalty-50 \vskip\envskipamount \fi}}
+\def\aboveenvbreak{{%
+ % =10000 instead of <10000 because of a special case in \itemzzz, q.v.
+ \ifnum \lastpenalty=10000 \else
+ \advance\envskipamount by \parskip
+ \endgraf
+ \ifdim\lastskip<\envskipamount
+ \removelastskip
+ % it's not a good place to break if the last penalty was \nobreak
+ % or better ...
+ \ifnum\lastpenalty>10000 \else \penalty-50 \fi
+ \vskip\envskipamount
+ \fi
+ \fi
+}}
\let\afterenvbreak = \aboveenvbreak
% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
\let\nonarrowing=\relax
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \cartouche: draw rectangle w/rounded corners around argument
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
\font\circle=lcircle10
\newdimen\circthick
\newdimen\cartouter\newdimen\cartinner
\def\cbl{{\circle\char'012\hskip -6pt}}
\def\cbr{{\hskip 6pt\circle\char'011}}
\def\carttop{\hbox to \cartouter{\hskip\lskip
- \ctl\leaders\hrule height\circthick\hfil\ctr
- \hskip\rskip}}
+ \ctl\leaders\hrule height\circthick\hfil\ctr
+ \hskip\rskip}}
\def\cartbot{\hbox to \cartouter{\hskip\lskip
- \cbl\leaders\hrule height\circthick\hfil\cbr
- \hskip\rskip}}
+ \cbl\leaders\hrule height\circthick\hfil\cbr
+ \hskip\rskip}}
%
\newskip\lskip\newskip\rskip
-\long\def\cartouche{%
+\def\cartouche{%
+\par % can't be in the midst of a paragraph.
\begingroup
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt %we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18pt % allow for 3pt kerns on either
-% side, and for 6pt waste from
-% each corner char
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing=\comment
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \hsize=\cartinner
- \kern3pt
- \begingroup
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
+ \lskip=\leftskip \rskip=\rightskip
+ \leftskip=0pt\rightskip=0pt %we want these *outside*.
+ \cartinner=\hsize \advance\cartinner by-\lskip
+ \advance\cartinner by-\rskip
+ \cartouter=\hsize
+ \advance\cartouter by 18.4pt % allow for 3pt kerns on either
+% side, and for 6pt waste from
+% each corner char, and rule thickness
+ \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+ % Flag to tell @lisp, etc., not to narrow margin.
+ \let\nonarrowing=\comment
+ \vbox\bgroup
+ \baselineskip=0pt\parskip=0pt\lineskip=0pt
+ \carttop
+ \hbox\bgroup
+ \hskip\lskip
+ \vrule\kern3pt
+ \vbox\bgroup
+ \hsize=\cartinner
+ \kern3pt
+ \begingroup
+ \baselineskip=\normbskip
+ \lineskip=\normlskip
+ \parskip=\normpskip
+ \vskip -\parskip
\def\Ecartouche{%
- \endgroup
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
+ \endgroup
+ \kern3pt
+ \egroup
+ \kern3pt\vrule
+ \hskip\rskip
+ \egroup
+ \cartbot
+ \egroup
\endgroup
}}
\inENV % This group ends at the end of the body
\hfuzz = 12pt % Don't be fussy
\sepspaces % Make spaces be word-separators rather than space tokens.
- \singlespace
\let\par = \lisppar % don't ignore blank lines
\obeylines % each line of input is a line of output
\parskip = 0pt
\fi
}
-% To ending an @example-like environment, we first end the paragraph
-% (via \afterenvbreak's vertical glue), and then the group. That way we
-% keep the zero \parskip that the environments set -- \parskip glue
-% will be inserted at the beginning of the next paragraph in the
-% document, after the environment.
+% Define the \E... control sequence only if we are inside the particular
+% environment, so the error checking in \end will work.
+%
+% To end an @example-like environment, we first end the paragraph (via
+% \afterenvbreak's vertical glue), and then the group. That way we keep
+% the zero \parskip that the environments set -- \parskip glue will be
+% inserted at the beginning of the next paragraph in the document, after
+% the environment.
%
-\def\nonfillfinish{\afterenvbreak\endgroup}%
+\def\nonfillfinish{\afterenvbreak\endgroup}
-% This macro is
+% @lisp: indented, narrowed, typewriter font.
\def\lisp{\begingroup
\nonfillstart
\let\Elisp = \nonfillfinish
\tt
- \rawbackslash % have \ input char produce \ char from current font
- \gobble
+ \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+ \gobble % eat return
}
-% Define the \E... control sequence only if we are inside the
-% environment, so the error checking in \end will work.
-%
-% We must call \lisp last in the definition, since it reads the
-% return following the @example (or whatever) command.
-%
+% @example: Same as @lisp.
\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
-\def\smallexample{\begingroup \def\Esmallexample{\nonfillfinish\endgroup}\lisp}
-\def\smalllisp{\begingroup \def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
-% @smallexample and @smalllisp. This is not used unless the @smallbook
-% command is given. Originally contributed by Pavel@xerox.
-%
-\def\smalllispx{\begingroup
- \nonfillstart
- \let\Esmalllisp = \nonfillfinish
- \let\Esmallexample = \nonfillfinish
- %
- % Smaller interline space and fonts for small examples.
- \setleading{10pt}%
- \indexfonts \tt
- \rawbackslash % make \ output the \ character from the current font (tt)
- \gobble
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+\def\smalllisp{\begingroup
+ \def\Esmalllisp{\nonfillfinish\endgroup}%
+ \def\Esmallexample{\nonfillfinish\endgroup}%
+ \smallexamplefonts
+ \lisp
}
+\let\smallexample = \smalllisp
-% This is @display; same as @lisp except use roman font.
+
+% @display: same as @lisp except keep current font.
%
\def\display{\begingroup
\nonfillstart
\let\Edisplay = \nonfillfinish
\gobble
}
+%
+% @smalldisplay: @display plus smaller fonts.
+%
+\def\smalldisplay{\begingroup
+ \def\Esmalldisplay{\nonfillfinish\endgroup}%
+ \smallexamplefonts \rm
+ \display
+}
-% This is @format; same as @display except don't narrow margins.
+% @format: same as @display except don't narrow margins.
%
\def\format{\begingroup
\let\nonarrowing = t
\let\Eformat = \nonfillfinish
\gobble
}
-
-% @flushleft (same as @format) and @flushright.
%
-\def\flushleft{\begingroup
- \let\nonarrowing = t
- \nonfillstart
- \let\Eflushleft = \nonfillfinish
- \gobble
+% @smallformat: @format plus smaller fonts.
+%
+\def\smallformat{\begingroup
+ \def\Esmallformat{\nonfillfinish\endgroup}%
+ \smallexamplefonts \rm
+ \format
}
+
+% @flushleft (same as @format).
+%
+\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
+
+% @flushright.
+%
\def\flushright{\begingroup
\let\nonarrowing = t
\nonfillstart
\let\Eflushright = \nonfillfinish
\advance\leftskip by 0pt plus 1fill
- \gobble}
+ \gobble
+}
+
% @quotation does normal linebreaking (hence we can't use \nonfillstart)
% and narrows the margins.
\def\quotation{%
\begingroup\inENV %This group ends at the end of the @quotation body
{\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
- \singlespace
\parindent=0pt
% We have retained a nonzero parskip for the environment, since we're
% doing normal filling. So to avoid extra space below the environment...
\fi
}
+
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command. --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996. The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too. Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+ \do\ \do\\\do\{\do\}\do\$\do\&%
+ \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+ \do\<\do\>\do\|\do\@\do+\do\"%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+ \def\do##1{\catcode`##1=12}\dospecials}
+%
+% [Knuth] pp. 380,381,391
+% Disable Spanish ligatures ?` and !` of \tt font
+\begingroup
+ \catcode`\`=\active\gdef`{\relax\lq}
+\endgroup
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+ \catcode`\^^I=\active
+ \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+ \tt % easiest (and conventionally used) font for verbatim
+ \def\par{\leavevmode\endgraf}%
+ \catcode`\`=\active
+ \tabeightspaces
+ % Respect line breaks,
+ % print special symbols as themselves, and
+ % make each space count
+ % must do in this order:
+ \obeylines \uncatcodespecials \sepspaces
+}
+
+% Setup for the @verbatim environment
+%
+% Real tab expansion
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+\def\starttabbox{\setbox0=\hbox\bgroup}
+\begingroup
+ \catcode`\^^I=\active
+ \gdef\tabexpand{%
+ \catcode`\^^I=\active
+ \def^^I{\leavevmode\egroup
+ \dimen0=\wd0 % the width so far, or since the previous tab
+ \divide\dimen0 by\tabw
+ \multiply\dimen0 by\tabw % compute previous multiple of \tabw
+ \advance\dimen0 by\tabw % advance to next multiple of \tabw
+ \wd0=\dimen0 \box0 \starttabbox
+ }%
+ }
+\endgroup
+\def\setupverbatim{%
+ % Easiest (and conventionally used) font for verbatim
+ \tt
+ \def\par{\leavevmode\egroup\box0\endgraf}%
+ \catcode`\`=\active
+ \tabexpand
+ % Respect line breaks,
+ % print special symbols as themselves, and
+ % make each space count
+ % must do in this order:
+ \obeylines \uncatcodespecials \sepspaces
+ \everypar{\starttabbox}%
+}
+
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters. Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+% \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+ \catcode`[=1\catcode`]=2\catcode`\{=12\catcode`\}=12
+ \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+% \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%% Include LaTeX hack for completeness -- never know
+%% \begingroup
+%% \catcode`|=0 \catcode`[=1
+%% \catcode`]=2\catcode`\{=12\catcode`\}=12\catcode`\ =\active
+%% \catcode`\\=12|gdef|doverbatim#1@end verbatim[
+%% #1|endgroup|def|Everbatim[]|end[verbatim]]
+%% |endgroup
+%
+\begingroup
+ \catcode`\ =\active
+ \obeylines %
+ % ignore everything up to the first ^^M, that's the newline at the end
+ % of the @verbatim input line itself. Otherwise we get an extra blank
+ % line in the output.
+ \gdef\doverbatim#1^^M#2@end verbatim{#2\end{verbatim}}%
+\endgroup
+%
+\def\verbatim{%
+ \def\Everbatim{\nonfillfinish\endgroup}%
+ \begingroup
+ \nonfillstart
+ \advance\leftskip by -\defbodyindent
+ \begingroup\setupverbatim\doverbatim
+}
+
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+% Allow normal characters that we make active in the argument (a file name).
+\def\verbatiminclude{%
+ \begingroup
+ \catcode`\\=\other
+ \catcode`~=\other
+ \catcode`^=\other
+ \catcode`_=\other
+ \catcode`|=\other
+ \catcode`<=\other
+ \catcode`>=\other
+ \catcode`+=\other
+ \parsearg\doverbatiminclude
+}
+\def\setupverbatiminclude{%
+ \begingroup
+ \nonfillstart
+ \advance\leftskip by -\defbodyindent
+ \begingroup\setupverbatim
+}
+%
+\def\doverbatiminclude#1{%
+ % Restore active chars for included file.
+ \endgroup
+ \begingroup
+ \let\value=\expandablevalue
+ \def\thisfile{#1}%
+ \expandafter\expandafter\setupverbatiminclude\input\thisfile
+ \endgroup
+ \nonfillfinish
+ \endgroup
+}
+
+% @copying ... @end copying.
+% Save the text away for @insertcopying later. Many commands won't be
+% allowed in this context, but that's ok.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is very desirable.
+%
+\def\copying{\begingroup
+ % Define a command to swallow text until we reach `@end copying'.
+ % \ is the escape char in this texinfo.tex file, so it is the
+ % delimiter for the command; @ will be the escape char when we read
+ % it, but that doesn't matter.
+ \long\def\docopying##1\end copying{\gdef\copyingtext{##1}\enddocopying}%
+ %
+ % We must preserve ^^M's in the input file; see \insertcopying below.
+ \catcode`\^^M = \active
+ \docopying
+}
+
+% What we do to finish off the copying text.
+%
+\def\enddocopying{\endgroup\ignorespaces}
+
+% @insertcopying. Here we must play games with ^^M's. On the one hand,
+% we need them to delimit commands such as `@end quotation', so they
+% must be active. On the other hand, we certainly don't want every
+% end-of-line to be a \par, as would happen with the normal active
+% definition of ^^M. On the third hand, two ^^M's in a row should still
+% generate a \par.
+%
+% Our approach is to make ^^M insert a space and a penalty1 normally;
+% then it can also check if \lastpenalty=1. If it does, then manually
+% do \par.
+%
+% This messes up the normal definitions of @c[omment], so we redefine
+% it. Similarly for @ignore. (These commands are used in the gcc
+% manual for man page generation.)
+%
+% Seems pretty fragile, most line-oriented commands will presumably
+% fail, but for the limited use of getting the copying text (which
+% should be quite simple) inserted, we can hope it's ok.
+%
+{\catcode`\^^M=\active %
+\gdef\insertcopying{\begingroup %
+ \parindent = 0pt % looks wrong on title page
+ \def^^M{%
+ \ifnum \lastpenalty=1 %
+ \par %
+ \else %
+ \space \penalty 1 %
+ \fi %
+ }%
+ %
+ % Fix @c[omment] for catcode 13 ^^M's.
+ \def\c##1^^M{\ignorespaces}%
+ \let\comment = \c %
+ %
+ % Don't bother jumping through all the hoops that \doignore does, it
+ % would be very hard since the catcodes are already set.
+ \long\def\ignore##1\end ignore{\ignorespaces}%
+ %
+ \copyingtext %
+\endgroup}%
+}
+
\message{defuns,}
-% Define formatter for defuns
-% First, allow user to change definition object font (\df) internally
-\def\setdeffont #1 {\csname DEF#1\endcsname}
+% @defun etc.
\newskip\defbodyindent \defbodyindent=.4in
\newskip\defargsindent \defargsindent=50pt
-\newskip\deftypemargin \deftypemargin=12pt
\newskip\deflastargmargin \deflastargmargin=18pt
\newcount\parencount
-% define \functionparens, which makes ( and ) and & do special things.
-% \functionparens affects the group it is contained in.
+
+% We want ()&[] to print specially on the defun line.
+%
\def\activeparens{%
-\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
-\catcode`\[=\active \catcode`\]=\active}
+ \catcode`\(=\active \catcode`\)=\active
+ \catcode`\&=\active
+ \catcode`\[=\active \catcode`\]=\active
+}
% Make control sequences which act like normal parenthesis chars.
\let\lparen = ( \let\rparen = )
% Definitions of (, ) and & used in args for functions.
% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested %
-\global\advance\parencount by 1 }
+\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
+ \global\advance\parencount by 1
+}
%
% This is the definition of ( when already inside a level of parens.
\gdef\opnested{\char`\(\global\advance\parencount by 1 }
%
\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
-% also in that case restore the outer-level definition of (.
-\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
-\global\advance \parencount by -1 }
+ % also in that case restore the outer-level definition of (.
+ \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
+ \global\advance \parencount by -1 }
% If we encounter &foo, then turn on ()-hacking afterwards
\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
%
} % End of definition inside \activeparens
%% These parens (in \boldbrax) actually are a little bolder than the
%% contained text. This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&}
-\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}}
-
-% First, defname, which formats the header line itself.
-% #1 should be the function name.
-% #2 should be the type of definition, such as "Function".
-
-\def\defname #1#2{%
-% Get the values of \leftskip and \rightskip as they were
-% outside the @def...
-\dimen2=\leftskip
-\advance\dimen2 by -\defbodyindent
-\dimen3=\rightskip
-\advance\dimen3 by -\defbodyindent
-\noindent %
-\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
-\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
-\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
-\parshape 2 0in \dimen0 \defargsindent \dimen1 %
-% Now output arg 2 ("Function" or some such)
-% ending at \deftypemargin from the right margin,
-% but stuck inside a box of width 0 so it does not interfere with linebreaking
-{% Adjust \hsize to exclude the ambient margins,
-% so that \rightline will obey them.
-\advance \hsize by -\dimen2 \advance \hsize by -\dimen3
-\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}%
-% Make all lines underfull and no complaints:
-\tolerance=10000 \hbadness=10000
-\advance\leftskip by -\defbodyindent
-\exdentamount=\defbodyindent
-{\df #1}\enskip % Generate function name
-}
-
-% Actually process the body of a definition
-% #1 should be the terminating control sequence, such as \Edefun.
-% #2 should be the "another name" control sequence, such as \defunx.
-% #3 should be the control sequence that actually processes the header,
-% such as \defunheader.
-
-\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
-\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup %
-\catcode 61=\active % 61 is `='
-\obeylines\activeparens\spacesplit#3}
-
-\def\defmethparsebody #1#2#3#4 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
-\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
-
-\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 ##2 {\def#4{##1}%
-\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
-\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
+\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
+\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
+\let\ampnr = \&
+\def\lbrb{{\bf\char`\[}}
+\def\rbrb{{\bf\char`\]}}
-% These parsing functions are similar to the preceding ones
-% except that they do not make parens into active characters.
-% These are used for "variables" since they have no arguments.
+% Active &'s sneak into the index arguments, so make sure it's defined.
+{
+ \catcode`& = \active
+ \global\let& = \ampnr
+}
-\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2{\begingroup\obeylines\spacesplit#3}%
-\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup %
-\catcode 61=\active %
-\obeylines\spacesplit#3}
+% \defname, which formats the name of the @def (not the args).
+% #1 is the function name.
+% #2 is the type of definition, such as "Function".
+%
+\def\defname#1#2{%
+ % How we'll output the type name. Putting it in brackets helps
+ % distinguish it from the body text that may end up on the next line
+ % just below it.
+ \ifempty{#2}%
+ \def\defnametype{}%
+ \else
+ \def\defnametype{[\rm #2]}%
+ \fi
+ %
+ % Get the values of \leftskip and \rightskip as they were outside the @def...
+ \dimen2=\leftskip
+ \advance\dimen2 by -\defbodyindent
+ %
+ % Figure out values for the paragraph shape.
+ \setbox0=\hbox{\hskip \deflastargmargin{\defnametype}}%
+ \dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
+ \dimen1=\hsize \advance \dimen1 by -\defargsindent % size for continuations
+ \parshape 2 0in \dimen0 \defargsindent \dimen1
+ %
+ % Output arg 2 ("Function" or some such) but stuck inside a box of
+ % width 0 so it does not interfere with linebreaking.
+ \noindent
+ %
+ {% Adjust \hsize to exclude the ambient margins,
+ % so that \rightline will obey them.
+ \advance \hsize by -\dimen2
+ \dimen3 = 0pt % was -1.25pc
+ \rlap{\rightline{\defnametype\kern\dimen3}}%
+ }%
+ %
+ % Allow all lines to be underfull without complaint:
+ \tolerance=10000 \hbadness=10000
+ \advance\leftskip by -\defbodyindent
+ \exdentamount=\defbodyindent
+ {\df #1}\enskip % output function name
+ % \defunargs will be called next to output the arguments, if any.
+}
-% This is used for \def{tp,vr}parsebody. It could probably be used for
-% some of the others, too, with some judicious conditionals.
-%
+% Common pieces to start any @def...
+% #1 is the \E... control sequence to end the definition (which we define).
+% #2 is the \...x control sequence (which our caller defines).
+% #3 is the control sequence to process the header, such as \defunheader.
+%
\def\parsebodycommon#1#2#3{%
- \begingroup\inENV %
- \medbreak %
- % Define the end token that this defining construct specifies
+ \begingroup\inENV
+ % If there are two @def commands in a row, we'll have a \nobreak,
+ % which is there to keep the function description together with its
+ % header. But if there's nothing but headers, we need to allow a
+ % break somewhere. Check for penalty 10002 (inserted by
+ % \defargscommonending) instead of 10000, since the sectioning
+ % commands insert a \penalty10000, and we don't want to allow a break
+ % between a section heading and a defun.
+ \ifnum\lastpenalty=10002 \penalty2000 \fi
+ %
+ % Similarly, after a section heading, do not allow a break.
+ % But do insert the glue.
+ \ifnum\lastpenalty<10000 \medbreak
+ \else \medskip % preceded by discardable penalty, so not a breakpoint
+ \fi
+ %
+ % Define the \E... end token that this defining construct specifies
% so that it will exit this group.
\def#1{\endgraf\endgroup\medbreak}%
- \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
+ %
\parindent=0in
- \advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+ \advance\leftskip by \defbodyindent
\exdentamount=\defbodyindent
+}
+
+% Common part of the \...x definitions.
+%
+\def\defxbodycommon{%
+ % As with \parsebodycommon above, allow line break if we have multiple
+ % x headers in a row. It's not a great place, though.
+ \ifnum\lastpenalty=10002 \penalty2000 \fi
+ %
+ \begingroup\obeylines
+}
+
+% Process body of @defun, @deffn, @defmac, etc.
+%
+\def\defparsebody#1#2#3{%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2{\defxbodycommon \activeparens \spacesplit#3}%
+ \catcode\equalChar=\active
+ \begingroup\obeylines\activeparens
+ \spacesplit#3%
+}
+
+% #1, #2, #3 are the common arguments (see \parsebodycommon above).
+% #4, delimited by the space, is the class name.
+%
+\def\defmethparsebody#1#2#3#4 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 {\defxbodycommon \activeparens \spacesplit{#3{##1}}}%
+ \begingroup\obeylines\activeparens
+ % The \empty here prevents misinterpretation of a construct such as
+ % @deffn {whatever} {Enharmonic comma}
+ % See comments at \deftpparsebody, although in our case we don't have
+ % to remove the \empty afterwards, since it is empty.
+ \spacesplit{#3{#4}}\empty
+}
+
+% Used for @deftypemethod and @deftypeivar.
+% #1, #2, #3 are the common arguments (see \defparsebody).
+% #4, delimited by a space, is the class name.
+% #5 is the method's return type.
+%
+\def\deftypemethparsebody#1#2#3#4 #5 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 ##2 {\defxbodycommon \activeparens \spacesplit{#3{##1}{##2}}}%
+ \begingroup\obeylines\activeparens
+ \spacesplit{#3{#4}{#5}}%
+}
+
+% Used for @deftypeop. The change from \deftypemethparsebody is an
+% extra argument at the beginning which is the `category', instead of it
+% being the hardwired string `Method' or `Instance Variable'. We have
+% to account for this both in the \...x definition and in parsing the
+% input at hand. Thus also need a control sequence (passed as #5) for
+% the \E... definition to assign the category name to.
+%
+\def\deftypeopparsebody#1#2#3#4#5 #6 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 ##2 ##3 {\def#4{##1}%
+ \defxbodycommon \activeparens \spacesplit{#3{##2}{##3}}}%
+ \begingroup\obeylines\activeparens
+ \spacesplit{#3{#5}{#6}}%
+}
+
+% For @defop.
+\def\defopparsebody #1#2#3#4#5 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 ##2 {\def#4{##1}%
+ \defxbodycommon \activeparens \spacesplit{#3{##2}}}%
+ \begingroup\obeylines\activeparens
+ \spacesplit{#3{#5}}%
+}
+
+% These parsing functions are similar to the preceding ones
+% except that they do not make parens into active characters.
+% These are used for "variables" since they have no arguments.
+%
+\def\defvarparsebody #1#2#3{%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2{\defxbodycommon \spacesplit#3}%
+ \catcode\equalChar=\active
+ \begingroup\obeylines
+ \spacesplit#3%
+}
+
+% @defopvar.
+\def\defopvarparsebody #1#2#3#4#5 {%
+ \parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 ##2 {\def#4{##1}%
+ \defxbodycommon \spacesplit{#3{##2}}}%
\begingroup\obeylines
+ \spacesplit{#3{#5}}%
}
\def\defvrparsebody#1#2#3#4 {%
\parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
+ \begingroup\obeylines
\spacesplit{#3{#4}}%
}
%
\def\deftpparsebody #1#2#3#4 {%
\parsebodycommon{#1}{#2}{#3}%
+ \def#2##1 {\defxbodycommon \spacesplit{#3{##1}}}%
+ \begingroup\obeylines
\spacesplit{\parsetpheaderline{#3{#4}}}\empty
}
% Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any). That's what this does, putting the result in \tptemp.
-%
-\def\removeemptybraces\empty#1\relax{\def\tptemp{#1}}%
+% braces (if any). That's what this does.
+%
+\def\removeemptybraces\empty#1\relax{#1}
% After \spacesplit has done its work, this is called -- #1 is the final
% thing to call, #2 the type name (which starts with \empty), and #3
% (which might be empty) the arguments.
-%
+%
\def\parsetpheaderline#1#2#3{%
- \removeemptybraces#2\relax
- #1{\tptemp}{#3}%
+ #1{\removeemptybraces#2\relax}{#3}%
}%
-\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 ##2 {\def#4{##1}%
-\begingroup\obeylines\spacesplit{#3{##2}}}%
-\parindent=0in
-\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup\obeylines\spacesplit{#3{#5}}}
-
-% Split up #2 at the first space token.
+% Split up #2 (the rest of the input line) at the first space token.
% call #1 with two arguments:
% the first is all of #2 before the space token,
% the second is all of #2 after that space token.
% If #2 contains no space token, all of it is passed as the first arg
% and the second is passed as empty.
-
-{\obeylines
-\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
-\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
-\ifx\relax #3%
-#1{#2}{}\else #1{#2}{#3#4}\fi}}
-
-% So much for the things common to all kinds of definitions.
+%
+{\obeylines %
+ \gdef\spacesplit#1#2^^M{\endgroup\spacesplitx{#1}#2 \relax\spacesplitx}%
+ \long\gdef\spacesplitx#1#2 #3#4\spacesplitx{%
+ \ifx\relax #3%
+ #1{#2}{}%
+ \else %
+ #1{#2}{#3#4}%
+ \fi}%
+}
% Define @defun.
-% First, define the processing that is wanted for arguments of \defun
-% Use this to expand the args and terminate the paragraph they make up
+% This is called to end the arguments processing for all the @def... commands.
+%
+\def\defargscommonending{%
+ \interlinepenalty = 10000
+ \advance\rightskip by 0pt plus 1fil
+ \endgraf
+ \nobreak\vskip -\parskip
+ \penalty 10002 % signal to \parsebodycommon and \defxbodycommon.
+}
-\def\defunargs #1{\functionparens \sl
+% This expands the args and terminates the paragraph they comprise.
+%
+\def\defunargs#1{\functionparens \sl
% Expand, preventing hyphenation at `-' chars.
% Note that groups don't affect changes in \hyphenchar.
-\hyphenchar\tensl=0
+% Set the font temporarily and use \font in case \setfont made \tensl a macro.
+{\tensl\hyphenchar\font=0}%
#1%
-\hyphenchar\tensl=45
-\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi%
-\interlinepenalty=10000
-\advance\rightskip by 0pt plus 1fil
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
+{\tensl\hyphenchar\font=45}%
+\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
+ \defargscommonending
}
\def\deftypefunargs #1{%
% Use \boldbraxnoamp, not \functionparens, so that & is not special.
\boldbraxnoamp
\tclose{#1}% avoid \code because of side effects on active chars
-\interlinepenalty=10000
-\advance\rightskip by 0pt plus 1fil
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000%
+ \defargscommonending
}
% Do complete processing of one @defun or @defunx line already parsed.
\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
+\catcode\equalChar=\other % Turn off change made in \defparsebody
}
% @defun == @deffn Function
\def\defun{\defparsebody\Edefun\defunx\defunheader}
\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Function}%
+\begingroup\defname {#1}{\putwordDeffunc}%
\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
+\catcode\equalChar=\other % Turn off change made in \defparsebody
}
% @deftypefun int foobar (int @var{foo}, float @var{bar})
% #1 is the data type, #2 the name, #3 the args.
\def\deftypefunheaderx #1#2 #3\relax{%
\doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}%
+\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypefun}%
\deftypefunargs {#3}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
+\catcode\equalChar=\other % Turn off change made in \defparsebody
}
% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
-% \defheaderxcond#1\relax$$$
+% \defheaderxcond#1\relax$.$
% puts #1 in @code, followed by a space, but does nothing if #1 is null.
-\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
+\def\defheaderxcond#1#2$.${\ifx#1\relax\else\code{#1#2} \fi}
% #1 is the classification. #2 is the data type. #3 is the name and args.
\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
\begingroup
\normalparens % notably, turn off `&' magic, which prevents
% at least some C++ text from working
-\defname {\defheaderxcond#2\relax$$$#3}{#1}%
+\defname {\defheaderxcond#2\relax$.$#3}{#1}%
\deftypefunargs {#4}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
+\catcode\equalChar=\other % Turn off change made in \defparsebody
}
% @defmac == @deffn Macro
\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Macro}%
+\begingroup\defname {#1}{\putwordDefmac}%
\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
+\catcode\equalChar=\other % Turn off change made in \defparsebody
}
% @defspec == @deffn Special Form
\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Special Form}%
+\begingroup\defname {#1}{\putwordDefspec}%
\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
+\catcode\equalChar=\other % Turn off change made in \defparsebody
}
-% This definition is run if you use @defunx
-% anywhere other than immediately after a @defun or @defunx.
-
-\def\deffnx #1 {\errmessage{@deffnx in invalid context}}
-\def\defunx #1 {\errmessage{@defunx in invalid context}}
-\def\defmacx #1 {\errmessage{@defmacx in invalid context}}
-\def\defspecx #1 {\errmessage{@defspecx in invalid context}}
-\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
-
-% @defmethod, and so on
-
-% @defop {Funny Method} foo-class frobnicate argument
-
+% @defop CATEGORY CLASS OPERATION ARG...
+%
\def\defop #1 {\def\defoptype{#1}%
\defopparsebody\Edefop\defopx\defopheader\defoptype}
+%
+\def\defopheader#1#2#3{%
+ \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% function index entry
+ \begingroup
+ \defname{#2}{\defoptype\ \putwordon\ #1}%
+ \defunargs{#3}%
+ \endgroup
+}
+
+% @deftypeop CATEGORY CLASS TYPE OPERATION ARG...
+%
+\def\deftypeop #1 {\def\deftypeopcategory{#1}%
+ \deftypeopparsebody\Edeftypeop\deftypeopx\deftypeopheader
+ \deftypeopcategory}
+%
+% #1 is the class name, #2 the data type, #3 the operation name, #4 the args.
+\def\deftypeopheader#1#2#3#4{%
+ \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$.$#3}
+ {\deftypeopcategory\ \putwordon\ \code{#1}}%
+ \deftypefunargs{#4}%
+ \endgroup
+}
+
+% @deftypemethod CLASS TYPE METHOD ARG...
+%
+\def\deftypemethod{%
+ \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
+%
+% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
+\def\deftypemethodheader#1#2#3#4{%
+ \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$.$#3}{\putwordMethodon\ \code{#1}}%
+ \deftypefunargs{#4}%
+ \endgroup
+}
-\def\defopheader #1#2#3{%
-\dosubind {fn}{\code{#2}}{on #1}% Make entry in function index
-\begingroup\defname {#2}{\defoptype{} on #1}%
-\defunargs {#3}\endgroup %
+% @deftypeivar CLASS TYPE VARNAME
+%
+\def\deftypeivar{%
+ \deftypemethparsebody\Edeftypeivar\deftypeivarx\deftypeivarheader}
+%
+% #1 is the class name, #2 the data type, #3 the variable name.
+\def\deftypeivarheader#1#2#3{%
+ \dosubind{vr}{\code{#3}}{\putwordof\ \code{#1}}% entry in variable index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$.$#3}
+ {\putwordInstanceVariableof\ \code{#1}}%
+ \defvarargs{#3}%
+ \endgroup
}
% @defmethod == @defop Method
-
+%
\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
-
-\def\defmethodheader #1#2#3{%
-\dosubind {fn}{\code{#2}}{on #1}% entry in function index
-\begingroup\defname {#2}{Method on #1}%
-\defunargs {#3}\endgroup %
+%
+% #1 is the class name, #2 the method name, #3 the args.
+\def\defmethodheader#1#2#3{%
+ \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{#2}{\putwordMethodon\ \code{#1}}%
+ \defunargs{#3}%
+ \endgroup
}
% @defcv {Class Option} foo-class foo-flag
\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
\def\defcvarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{\defcvtype{} of #1}%
-\defvarargs {#3}\endgroup %
+ \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% variable index entry
+ \begingroup
+ \defname{#2}{\defcvtype\ \putwordof\ #1}%
+ \defvarargs{#3}%
+ \endgroup
}
-% @defivar == @defcv {Instance Variable}
-
+% @defivar CLASS VARNAME == @defcv {Instance Variable} CLASS VARNAME
+%
\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
-
-\def\defivarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{Instance Variable of #1}%
-\defvarargs {#3}\endgroup %
+%
+\def\defivarheader#1#2#3{%
+ \dosubind{vr}{\code{#2}}{\putwordof\ \code{#1}}% entry in var index
+ \begingroup
+ \defname{#2}{\putwordInstanceVariableof\ #1}%
+ \defvarargs{#3}%
+ \endgroup
}
-% These definitions are run if you use @defmethodx, etc.,
-% anywhere other than immediately after a @defmethod, etc.
-
-\def\defopx #1 {\errmessage{@defopx in invalid context}}
-\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}}
-\def\defcvx #1 {\errmessage{@defcvx in invalid context}}
-\def\defivarx #1 {\errmessage{@defivarx in invalid context}}
-
-% Now @defvar
-
+% @defvar
% First, define the processing that is wanted for arguments of @defvar.
% This is actually simple: just print them in roman.
% This must expand the args and terminate the paragraph they make up
\def\defvarargs #1{\normalparens #1%
-\interlinepenalty=10000
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000}
+ \defargscommonending
+}
% @defvr Counter foo-count
\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{Variable}%
+\begingroup\defname {#1}{\putwordDefvar}%
\defvarargs {#2}\endgroup %
}
\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{User Option}%
+\begingroup\defname {#1}{\putwordDefopt}%
\defvarargs {#2}\endgroup %
}
\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
-% #1 is the data type. #2 is the name.
+% #1 is the data type. #2 is the name, perhaps followed by text that
+% is actually part of the data type, which should not be put into the index.
\def\deftypevarheader #1#2{%
-\doind {vr}{\code{#2}}% Make entry in variables index
-\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
-\interlinepenalty=10000
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000
+\dovarind#2 \relax% Make entry in variables index
+\begingroup\defname {\defheaderxcond#1\relax$.$#2}{\putwordDeftypevar}%
+ \defargscommonending
\endgroup}
+\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
% @deftypevr {Global Flag} int enable
\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
-\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}%
-\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
-\interlinepenalty=10000
-\endgraf\penalty 10000\vskip -\parskip\penalty 10000
+\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
+\begingroup\defname {\defheaderxcond#2\relax$.$#3}{#1}
+ \defargscommonending
\endgroup}
-% This definition is run if you use @defvarx
-% anywhere other than immediately after a @defvar or @defvarx.
-
-\def\defvrx #1 {\errmessage{@defvrx in invalid context}}
-\def\defvarx #1 {\errmessage{@defvarx in invalid context}}
-\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
-\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}}
-\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}}
-
% Now define @deftp
% Args are printed in bold, a slight difference from @defvar.
\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
-% This definition is run if you use @deftpx, etc
-% anywhere other than immediately after a @deftp, etc.
+% These definitions are used if you use @defunx (etc.)
+% anywhere other than immediately after a @defun or @defunx.
+%
+\def\defcvx#1 {\errmessage{@defcvx in invalid context}}
+\def\deffnx#1 {\errmessage{@deffnx in invalid context}}
+\def\defivarx#1 {\errmessage{@defivarx in invalid context}}
+\def\defmacx#1 {\errmessage{@defmacx in invalid context}}
+\def\defmethodx#1 {\errmessage{@defmethodx in invalid context}}
+\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
+\def\defopx#1 {\errmessage{@defopx in invalid context}}
+\def\defspecx#1 {\errmessage{@defspecx in invalid context}}
+\def\deftpx#1 {\errmessage{@deftpx in invalid context}}
+\def\deftypefnx#1 {\errmessage{@deftypefnx in invalid context}}
+\def\deftypefunx#1 {\errmessage{@deftypefunx in invalid context}}
+\def\deftypeivarx#1 {\errmessage{@deftypeivarx in invalid context}}
+\def\deftypemethodx#1 {\errmessage{@deftypemethodx in invalid context}}
+\def\deftypeopx#1 {\errmessage{@deftypeopx in invalid context}}
+\def\deftypevarx#1 {\errmessage{@deftypevarx in invalid context}}
+\def\deftypevrx#1 {\errmessage{@deftypevrx in invalid context}}
+\def\defunx#1 {\errmessage{@defunx in invalid context}}
+\def\defvarx#1 {\errmessage{@defvarx in invalid context}}
+\def\defvrx#1 {\errmessage{@defvrx in invalid context}}
+
+
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\undefined
+ \newwrite\macscribble
+ \def\scanmacro#1{%
+ \begingroup \newlinechar`\^^M
+ % Undo catcode changes of \startcontents and \doprintindex
+ \catcode`\@=0 \catcode`\\=\other \escapechar=`\@
+ % Append \endinput to make sure that TeX does not see the ending newline.
+ \toks0={#1\endinput}%
+ \immediate\openout\macscribble=\jobname.tmp
+ \immediate\write\macscribble{\the\toks0}%
+ \immediate\closeout\macscribble
+ \let\xeatspaces\eatspaces
+ \input \jobname.tmp
+ \endgroup
+}
+\else
+\def\scanmacro#1{%
+\begingroup \newlinechar`\^^M
+% Undo catcode changes of \startcontents and \doprintindex
+\catcode`\@=0 \catcode`\\=\other \escapechar=`\@
+\let\xeatspaces\eatspaces\scantokens{#1\endinput}\endgroup}
+\fi
+
+\newcount\paramno % Count of parameters
+\newtoks\macname % Macro name
+\newif\ifrecursive % Is it recursive?
+\def\macrolist{} % List of all defined macros in the form
+ % \do\macro1\do\macro2...
+
+% Utility routines.
+% Thisdoes \let #1 = #2, except with \csnames.
+\def\cslet#1#2{%
+\expandafter\expandafter
+\expandafter\let
+\expandafter\expandafter
+\csname#1\endcsname
+\csname#2\endcsname}
+
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \.
+
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+
+\def\macrobodyctxt{%
+ \catcode`\~=\other
+ \catcode`\^=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\+=\other
+ \catcode`\{=\other
+ \catcode`\}=\other
+ \catcode`\@=\other
+ \catcode`\^^M=\other
+ \usembodybackslash}
+
+\def\macroargctxt{%
+ \catcode`\~=\other
+ \catcode`\^=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\+=\other
+ \catcode`\@=\other
+ \catcode`\\=\other}
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+ \getargs{#1}% now \macname is the macname and \argl the arglist
+ \ifx\argl\empty % no arguments
+ \paramno=0%
+ \else
+ \expandafter\parsemargdef \argl;%
+ \fi
+ \if1\csname ismacro.\the\macname\endcsname
+ \message{Warning: redefining \the\macname}%
+ \else
+ \expandafter\ifx\csname \the\macname\endcsname \relax
+ \else \errmessage{Macro name \the\macname\space already defined}\fi
+ \global\cslet{macsave.\the\macname}{\the\macname}%
+ \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+ % Add the macroname to \macrolist
+ \toks0 = \expandafter{\macrolist\do}%
+ \xdef\macrolist{\the\toks0
+ \expandafter\noexpand\csname\the\macname\endcsname}%
+ \fi
+ \begingroup \macrobodyctxt
+ \ifrecursive \expandafter\parsermacbody
+ \else \expandafter\parsemacbody
+ \fi}
+
+\def\unmacro{\parsearg\dounmacro}
+\def\dounmacro#1{%
+ \if1\csname ismacro.#1\endcsname
+ \global\cslet{#1}{macsave.#1}%
+ \global\expandafter\let \csname ismacro.#1\endcsname=0%
+ % Remove the macro name from \macrolist:
+ \begingroup
+ \expandafter\let\csname#1\endcsname \relax
+ \let\do\unmacrodo
+ \xdef\macrolist{\macrolist}%
+ \endgroup
+ \else
+ \errmessage{Macro #1 not defined}%
+ \fi
+}
+
+% Called by \do from \dounmacro on each macro. The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+ \ifx#1\relax
+ % remove this
+ \else
+ \noexpand\do \noexpand #1%
+ \fi
+}
+
+% This makes use of the obscure feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname #1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+
+% Parse the optional {params} list. Set up \paramno and \paramlist
+% so \defmacro knows what to do. Define \macarg.blah for each blah
+% in the params list, to be ##N where N is the position in that list.
+% That gets used by \mbodybackslash (above).
+
+% We need to get `macro parameter char #' into several definitions.
+% The technique used is stolen from LaTeX: let \hash be something
+% unexpandable, insert that wherever you need a #, and then redefine
+% it to # just before using the token list produced.
+%
+% The same technique is used to protect \eatspaces till just before
+% the macro is used.
+
+\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
+ \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
+\def\parsemargdefxxx#1,{%
+ \if#1;\let\next=\relax
+ \else \let\next=\parsemargdefxxx
+ \advance\paramno by 1%
+ \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+ {\xeatspaces{\hash\the\paramno}}%
+ \edef\paramlist{\paramlist\hash\the\paramno,}%
+ \fi\next}
+
+% These two commands read recursive and nonrecursive macro bodies.
+% (They're different since rec and nonrec macros end differently.)
+
+\long\def\parsemacbody#1@end macro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\long\def\parsermacbody#1@end rmacro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+
+% This defines the macro itself. There are six cases: recursive and
+% nonrecursive macros of zero, one, and many arguments.
+% Much magic with \expandafter here.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in; @include reads the file inside a group.
+\def\defmacro{%
+ \let\hash=##% convert placeholders to macro parameter chars
+ \ifrecursive
+ \ifcase\paramno
+ % 0
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\scanmacro{\temp}}%
+ \or % 1
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+ \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \egroup\noexpand\scanmacro{\temp}}%
+ \else % many
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+ \fi
+ \else
+ \ifcase\paramno
+ % 0
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \or % 1
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \noexpand\braceorline
+ \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+ \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \else % many
+ \expandafter\xdef\csname\the\macname\endcsname{%
+ \bgroup\noexpand\macroargctxt
+ \expandafter\noexpand\csname\the\macname xx\endcsname}%
+ \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\xdef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{%
+ \egroup
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scanmacro{\temp}\egroup}%
+ \fi
+ \fi}
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+% \braceorline decides whether the next nonwhitespace character is a
+% {. If so it reads up to the closing }, if not, it reads the whole
+% line. Whatever was read is then fed to the next control sequence
+% as an argument (by \parsebrace or \parsearg)
+\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+ \ifx\nchar\bgroup\else
+ \expandafter\parsearg
+ \fi \next}
+
+% We mant to disable all macros during \shipout so that they are not
+% expanded by \write.
+\def\turnoffmacros{\begingroup \def\do##1{\let\noexpand##1=\relax}%
+ \edef\next{\macrolist}\expandafter\endgroup\next}
+
-\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign. Just make them active and then expand them all to nothing.
+\def\alias{\begingroup\obeyspaces\parsearg\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{\ignoreactivespaces
+\edef\next{\global\let\expandafter\noexpand\csname#1\endcsname=%
+ \expandafter\noexpand\csname#2\endcsname}%
+\expandafter\endgroup\next}
-\message{cross reference,}
-% Define cross-reference macros
-\newwrite \auxfile
-\newif\ifhavexrefs % True if xref values are known.
+\message{cross references,}
+
+\newwrite\auxfile
+
+\newif\ifhavexrefs % True if xref values are known.
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-% \setref{foo} defines a cross-reference point named foo.
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+ node \samp{\ignorespaces#1{}}}
-\def\setref#1{%
-\dosetq{#1-title}{Ytitle}%
-\dosetq{#1-pg}{Ypagenumber}%
-\dosetq{#1-snt}{Ysectionnumberandtype}}
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references.
+\def\node{\ENVcheck\parsearg\nodezzz}
+\def\nodezzz#1{\nodexxx #1,\finishnodeparse}
+\def\nodexxx#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+\let\nwnode=\node
+\let\lastnode=\empty
-\def\unnumbsetref#1{%
-\dosetq{#1-title}{Ytitle}%
-\dosetq{#1-pg}{Ypagenumber}%
-\dosetq{#1-snt}{Ynothing}}
+% Write a cross-reference definition for the current node. #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+ \ifx\lastnode\empty\else
+ \expandafter\expandafter\expandafter\setref{\lastnode}{#1}%
+ \global\let\lastnode=\empty
+ \fi
+}
-\def\appendixsetref#1{%
-\dosetq{#1-title}{Ytitle}%
-\dosetq{#1-pg}{Ypagenumber}%
-\dosetq{#1-snt}{Yappendixletterandtype}}
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\gdef\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\gdef\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\gdef\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), namely NAME-title (the corresponding @chapter/etc. name),
+% NAME-pg (the page number), and NAME-snt (section number and type).
+% Called from \foonoderef.
+%
+% We have to set dummies so commands such as @code in a section title
+% aren't expanded. It would be nicer not to expand the titles in the
+% first place, but that is hard to do.
+%
+% Likewise, use \turnoffactive so that punctuation chars such as underscore
+% and backslash work in node names.
+%
+\def\setref#1#2{{%
+ \atdummies
+ \pdfmkdest{#1}%
+ %
+ \iflinks
+ \turnoffactive
+ \dosetq{#1-title}{Ytitle}%
+ \dosetq{#1-pg}{Ypagenumber}%
+ \dosetq{#1-snt}{#2}%
+ \fi
+}}
-% \xref, \pxref, and \ref generate cross-references to specified points.
-% For \xrefX, #1 is the node name, #2 the name of the Info
-% cross-reference, #3 the printed node name, #4 the name of the Info
-% file, #5 the name of the printed manual. All but the node name can be
-% omitted.
+% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual. All but the node name can be omitted.
%
\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
\def\ref#1{\xrefX[#1,,,,,,,]}
\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+ \unsepspaces
\def\printedmanual{\ignorespaces #5}%
\def\printednodename{\ignorespaces #3}%
\setbox1=\hbox{\printedmanual}%
\setbox0=\hbox{\printednodename}%
\ifdim \wd0 = 0pt
% No printed node name was explicitly given.
- \ifx\SETxref-automatic-section-title\relax %
+ \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
+ % Use the node name inside the square brackets.
+ \def\printednodename{\ignorespaces #1}%
+ \else
% Use the actual chapter/section title appear inside
% the square brackets. Use the real section title if we have it.
- \ifdim \wd1>0pt%
+ \ifdim \wd1 > 0pt
% It is in another manual, so we don't have it.
\def\printednodename{\ignorespaces #1}%
\else
\ifhavexrefs
% We know the real title if we have the xref values.
- \def\printednodename{\refx{#1-title}}%
+ \def\printednodename{\refx{#1-title}{}}%
\else
% Otherwise just copy the Info node name.
\def\printednodename{\ignorespaces #1}%
\fi%
\fi
- \def\printednodename{#1-title}%
- \else
- % Use the node name inside the square brackets.
- \def\printednodename{\ignorespaces #1}%
\fi
\fi
%
% are best written with fairly long node names, containing hyphens, this
% is a loss. Therefore, we give the text of the node name again, so it
% is as if TeX is seeing it for the first time.
+ \ifpdf
+ \leavevmode
+ \getfilename{#4}%
+ {\turnoffactive \otherbackslash
+ \ifnum\filenamelength>0
+ \startlink attr{/Border [0 0 0]}%
+ goto file{\the\filename.pdf} name{#1}%
+ \else
+ \startlink attr{/Border [0 0 0]}%
+ goto name{\pdfmkpgn{#1}}%
+ \fi
+ }%
+ \linkcolor
+ \fi
+ %
\ifdim \wd1 > 0pt
- \putwordsection{} ``\printednodename'' in \cite{\printedmanual}%
+ \putwordsection{} ``\printednodename'' \putwordin{} \cite{\printedmanual}%
\else
% _ (for example) has to be the character _ for the purposes of the
% control sequence corresponding to the node, but it has to expand
% into the usual \leavevmode...\vrule stuff for purposes of
% printing. So we \turnoffactive for the \refx-snt, back on for the
% printing, back off for the \refx-pg.
- {\turnoffactive \refx{#1-snt}{}}%
- \space [\printednodename],\space
- \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+ {\turnoffactive \otherbackslash
+ % Only output a following space if the -snt ref is nonempty; for
+ % @unnumbered and @anchor, it won't be.
+ \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+ \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+ }%
+ % output the `[mynode]' via a macro.
+ \xrefprintnodename\printednodename
+ %
+ % But we always want a comma and a space:
+ ,\space
+ %
+ % output the `page 3'.
+ \turnoffactive \otherbackslash \putwordpage\tie\refx{#1-pg}{}%
\fi
+ \endlink
\endgroup}
-% \dosetq is the interface for calls from other macros
-
-% Use \turnoffactive so that punctuation chars such as underscore
-% work in node names.
-\def\dosetq #1#2{{\let\folio=0 \turnoffactive \auxhat%
-\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
-\next}}
-
-% \internalsetq {foo}{page} expands into
-% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
-% When the aux file is read, ' is the escape character
-
-\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output. It's a separate macro only so it can be changed more easily,
+% since not square brackets don't work in some documents. Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
-% Things to be expanded by \internalsetq
+% \dosetq is called from \setref to do the actual \write (\iflinks).
+%
+\def\dosetq#1#2{%
+ \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
+ \next
+}
-\def\Ypagenumber{\folio}
+% \internalsetq{foo}{page} expands into
+% CHARACTERS @xrdef{foo}{...expansion of \page...}
+\def\internalsetq#1#2{@xrdef{#1}{\csname #2\endcsname}}
+% Things to be expanded by \internalsetq.
+%
+\def\Ypagenumber{\noexpand\folio}
\def\Ytitle{\thissection}
-
\def\Ynothing{}
-
-\def\Ysectionnumberandtype{%
-\ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
-\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
-\else \ifnum \subsubsecno=0 %
-\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
-\else %
-\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
-\fi \fi \fi }
-
-\def\Yappendixletterandtype{%
-\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
-\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
-\else \ifnum \subsubsecno=0 %
-\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
-\else %
-\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
-\fi \fi \fi }
-
-\gdef\xreftie{'tie}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+ \ifnum\secno=0
+ \putwordChapter@tie \the\chapno
+ \else \ifnum\subsecno=0
+ \putwordSection@tie \the\chapno.\the\secno
+ \else \ifnum\subsubsecno=0
+ \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+ \else
+ \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+ \fi\fi\fi
+}
+\def\Yappendix{%
+ \ifnum\secno=0
+ \putwordAppendix@tie @char\the\appendixno{}%
+ \else \ifnum\subsecno=0
+ \putwordSection@tie @char\the\appendixno.\the\secno
+ \else \ifnum\subsubsecno=0
+ \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+ \else
+ \putwordSection@tie
+ @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+ \fi\fi\fi
+}
% Use TeX 3.0's \inputlineno to get the line number, for better error
% messages, but if we're using an old version of TeX, don't do anything.
%
\ifx\inputlineno\thisisundefined
- \let\linenumber = \empty % Non-3.0.
+ \let\linenumber = \empty % Pre-3.0.
\else
\def\linenumber{\the\inputlineno:\space}
\fi
% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
% If its value is nonempty, SUFFIX is output afterward.
-
+%
\def\refx#1#2{%
- \expandafter\ifx\csname X#1\endcsname\relax
+ {%
+ \indexnofonts
+ \otherbackslash
+ \expandafter\global\expandafter\let\expandafter\thisrefX
+ \csname X#1\endcsname
+ }%
+ \ifx\thisrefX\relax
% If not defined, say something at least.
- $\langle$un\-de\-fined$\rangle$%
- \ifhavexrefs
- \message{\linenumber Undefined cross reference `#1'.}%
- \else
- \ifwarnedxrefs\else
- \global\warnedxrefstrue
- \message{Cross reference values unknown; you must run TeX again.}%
+ \angleleft un\-de\-fined\angleright
+ \iflinks
+ \ifhavexrefs
+ \message{\linenumber Undefined cross reference `#1'.}%
+ \else
+ \ifwarnedxrefs\else
+ \global\warnedxrefstrue
+ \message{Cross reference values unknown; you must run TeX again.}%
+ \fi
\fi
\fi
\else
% It's defined, so just use it.
- \csname X#1\endcsname
+ \thisrefX
\fi
#2% Output the suffix in any case.
}
-% Read the last existing aux file, if any. No error if none exists.
-
% This is the macro invoked by entries in the aux file.
-\def\xrdef #1#2{
-{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}}
+%
+\def\xrdef#1{\expandafter\gdef\csname X#1\endcsname}
-\def\readauxfile{%
-\begingroup
-\catcode `\^^@=\other
-\catcode `\\ 1=\other
-\catcode `\\ 2=\other
-\catcode `\^^C=\other
-\catcode `\^^D=\other
-\catcode `\^^E=\other
-\catcode `\^^F=\other
-\catcode `\^^G=\other
-\catcode `\^^H=\other
-\catcode `\\v=\other
-\catcode `\^^L=\other
-\catcode `\\ e=\other
-\catcode `\\ f=\other
-\catcode `\\10=\other
-\catcode `\\11=\other
-\catcode `\\12=\other
-\catcode `\\13=\other
-\catcode `\\14=\other
-\catcode `\\15=\other
-\catcode `\\16=\other
-\catcode `\\17=\other
-\catcode `\\18=\other
-\catcode `\\19=\other
-\catcode 26=\other
-\catcode `\^^[=\other
-\catcode `\^^\=\other
-\catcode `\^^]=\other
-\catcode `\^^^=\other
-\catcode `\^^_=\other
-\catcode `\@=\other
-\catcode `\^=\other
-\catcode `\~=\other
-\catcode `\[=\other
-\catcode `\]=\other
-\catcode`\"=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode `\$=\other
-\catcode `\#=\other
-\catcode `\&=\other
-% `\+ does not work, so use 43.
-\catcode 43=\other
-% Make the characters 128-255 be printing characters
-{%
- \count 1=128
- \def\loop{%
- \catcode\count 1=\other
- \advance\count 1 by 1
- \ifnum \count 1<256 \loop \fi
+% Read the last existing aux file, if any. No error if none exists.
+\def\readauxfile{\begingroup
+ \catcode`\^^@=\other
+ \catcode`\^^A=\other
+ \catcode`\^^B=\other
+ \catcode`\^^C=\other
+ \catcode`\^^D=\other
+ \catcode`\^^E=\other
+ \catcode`\^^F=\other
+ \catcode`\^^G=\other
+ \catcode`\^^H=\other
+ \catcode`\^^K=\other
+ \catcode`\^^L=\other
+ \catcode`\^^N=\other
+ \catcode`\^^P=\other
+ \catcode`\^^Q=\other
+ \catcode`\^^R=\other
+ \catcode`\^^S=\other
+ \catcode`\^^T=\other
+ \catcode`\^^U=\other
+ \catcode`\^^V=\other
+ \catcode`\^^W=\other
+ \catcode`\^^X=\other
+ \catcode`\^^Z=\other
+ \catcode`\^^[=\other
+ \catcode`\^^\=\other
+ \catcode`\^^]=\other
+ \catcode`\^^^=\other
+ \catcode`\^^_=\other
+ % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+ % in xref tags, i.e., node names. But since ^^e4 notation isn't
+ % supported in the main text, it doesn't seem desirable. Furthermore,
+ % that is not enough: for node names that actually contain a ^
+ % character, we would end up writing a line like this: 'xrdef {'hat
+ % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+ % argument, and \hat is not an expandable control sequence. It could
+ % all be worked out, but why? Either we support ^^ or we don't.
+ %
+ % The other change necessary for this was to define \auxhat:
+ % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+ % and then to call \auxhat in \setq.
+ %
+ \catcode`\^=\other
+ %
+ % Special characters. Should be turned off anyway, but...
+ \catcode`\~=\other
+ \catcode`\[=\other
+ \catcode`\]=\other
+ \catcode`\"=\other
+ \catcode`\_=\other
+ \catcode`\|=\other
+ \catcode`\<=\other
+ \catcode`\>=\other
+ \catcode`\$=\other
+ \catcode`\#=\other
+ \catcode`\&=\other
+ \catcode`\%=\other
+ \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+ %
+ % Make the characters 128-255 be printing characters
+ {%
+ \count 1=128
+ \def\loop{%
+ \catcode\count 1=\other
+ \advance\count 1 by 1
+ \ifnum \count 1<256 \loop \fi
+ }%
}%
-}%
-% the aux file uses ' as the escape.
-% Turn off \ as an escape so we do not lose on
-% entries which were dumped with control sequences in their names.
-% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
-% Reference to such entries still does not work the way one would wish,
-% but at least they do not bomb out when the aux file is read in.
-\catcode `\{=1 \catcode `\}=2
-\catcode `\%=\other
-\catcode `\'=0
-\catcode`\^=7 % to make ^^e4 etc usable in xref tags
-\catcode `\\=\other
-\openin 1 \jobname.aux
-\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue
-\global\warnedobstrue
-\fi
-% Open the new aux file. Tex will close it automatically at exit.
-\openout \auxfile=\jobname.aux
+ %
+ % Turn off \ as an escape so we do not lose on
+ % entries which were dumped with control sequences in their names.
+ % For example, @xrdef{$\leq $-fun}{page ...} made by @defun ^^
+ % Reference to such entries still does not work the way one would wish,
+ % but at least they do not bomb out when the aux file is read in.
+ \catcode`\\=\other
+ %
+ % @ is our escape character in .aux files.
+ \catcode`\{=1
+ \catcode`\}=2
+ \catcode`\@=0
+ %
+ \openin 1 \jobname.aux
+ \ifeof 1 \else
+ \closein 1
+ \input \jobname.aux
+ \global\havexrefstrue
+ \fi
+ % Open the new aux file. TeX will close it automatically at exit.
+ \openout\auxfile=\jobname.aux
\endgroup}
% The trailing space in the following definition for supereject is
% vital for proper filling; pages come out unaligned when you do a
% pagealignmacro call if that space before the closing brace is
-% removed.
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
\def\supereject{\par\penalty -20000\footnoteno =0 }
-% @footnotestyle is meaningful for info output only..
+% @footnotestyle is meaningful for info output only.
\let\footnotestyle=\comment
\let\ptexfootnote=\footnote
%
% Auto-number footnotes. Otherwise like plain.
\gdef\footnote{%
+ \let\indent=\ptexindent
+ \let\noindent=\ptexnoindent
\global\advance\footnoteno by \@ne
\edef\thisfootno{$^{\the\footnoteno}$}%
%
% In case the footnote comes at the end of a sentence, preserve the
% extra spacing after we do the footnote number.
\let\@sf\empty
- \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
+ \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
%
% Remove inadvertent blank space before typesetting the footnote number.
\unskip
\thisfootno\@sf
- \footnotezzz
+ \dofootnote
}%
% Don't bother with the trickery in plain.tex to not require the
% footnote text as a parameter. Our footnotes don't need to be so general.
%
-\long\gdef\footnotezzz#1{\insert\footins{%
+% Oh yes, they do; otherwise, @ifset and anything else that uses
+% \parseargline fail inside footnotes because the tokens are fixed when
+% the footnote is read. --karl, 16nov96.
+%
+% The start of the footnote looks usually like this:
+\gdef\startfootins{\insert\footins\bgroup}
+%
+% ... but this macro is redefined inside @multitable.
+%
+\gdef\dofootnote{%
+ \startfootins
% We want to typeset this text as a normal paragraph, even if the
% footnote reference occurs in (for example) a display environment.
% So reset some parameters.
+ \hsize=\pagewidth
\interlinepenalty\interfootnotelinepenalty
\splittopskip\ht\strutbox % top baseline for broken footnotes
\splitmaxdepth\dp\strutbox
\xspaceskip\z@skip
\parindent\defaultparindent
%
- % Hang the footnote text off the number.
- \hang
+ \smallfonts \rm
+ %
+ % Because we use hanging indentation in footnotes, a @noindent appears
+ % to exdent this text, so make it be a no-op. makeinfo does not use
+ % hanging indentation so @noindent can still be needed within footnote
+ % text after an @example or the like (not that this is good style).
+ \let\noindent = \relax
+ %
+ % Hang the footnote text off the number. Use \everypar in case the
+ % footnote extends for more than one paragraph.
+ \everypar = {\hang}%
\textindent{\thisfootno}%
%
% Don't crash into the line above the footnote text. Since this
% expands into a box, it must come within the paragraph, lest it
% provide a place where TeX can split the footnote.
\footstrut
- #1\strut}%
+ \futurelet\next\fo@t
}
-
}%end \catcode `\@=11
-% Set the baselineskip to #1, and the lineskip and strut size
-% correspondingly. There is no deep meaning behind these magic numbers
-% used as factors; they just match (closely enough) what Knuth defined.
-%
-\def\lineskipfactor{.08333}
-\def\strutheightpercent{.70833}
-\def\strutdepthpercent {.29167}
-%
-\def\setleading#1{%
- \normalbaselineskip = #1\relax
- \normallineskip = \lineskipfactor\normalbaselineskip
- \normalbaselines
- \setbox\strutbox =\hbox{%
- \vrule width0pt height\strutheightpercent\baselineskip
- depth \strutdepthpercent \baselineskip
- }%
-}
-
% @| inserts a changebar to the left of the current line. It should
% surround any changed text. This approach does *not* work if the
% change spans more than two lines of output. To handle that, we would
%
\def\finalout{\overfullrule=0pt}
+% @image. We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front. If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+ \closein 1
+ % Do not bother showing banner with epsf.tex v2.7k (available in
+ % doc/epsf.tex and on ctan).
+ \def\epsfannounce{\toks0 = }%
+ \input epsf.tex
+\fi
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+ work. It is also included in the Texinfo distribution, or you can get
+ it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+ \ifx\epsfbox\undefined
+ \ifwarnednoepsf \else
+ \errhelp = \noepsfhelp
+ \errmessage{epsf.tex not found, images will be ignored}%
+ \global\warnednoepsftrue
+ \fi
+ \else
+ \imagexxx #1,,,,,\finish
+ \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing this stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+ \catcode`\^^M = 5 % in case we're inside an example
+ \normalturnoffactive % allow _ et al. in names
+ % If the image is by itself, center it.
+ \ifvmode
+ \imagevmodetrue
+ \nobreak\bigskip
+ % Usually we'll have text after the image which will insert
+ % \parskip glue, so insert it here too to equalize the space
+ % above and below.
+ \nobreak\vskip\parskip
+ \nobreak
+ \line\bgroup\hss
+ \fi
+ %
+ % Output the image.
+ \ifpdf
+ \dopdfimage{#1}{#2}{#3}%
+ \else
+ % \epsfbox itself resets \epsf?size at each figure.
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+ \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+ \epsfbox{#1.eps}%
+ \fi
+ %
+ \ifimagevmode \hss \egroup \bigbreak \fi % space after the image
+\endgroup}
-% End of control word definitions.
-\message{and turning on texinfo input format.}
+\message{localization,}
+% and i18n.
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
+% @documentlanguage is usually given very early, just after
+% @setfilename. If done too late, it may not override everything
+% properly. Single argument is the language abbreviation.
+% It would be nice if we could set up a hyphenation file here.
+%
+\def\documentlanguage{\parsearg\dodocumentlanguage}
+\def\dodocumentlanguage#1{%
+ \tex % read txi-??.tex file in plain TeX.
+ % Read the file if it exists.
+ \openin 1 txi-#1.tex
+ \ifeof1
+ \errhelp = \nolanghelp
+ \errmessage{Cannot read language file txi-#1.tex}%
+ \let\temp = \relax
+ \else
+ \def\temp{\input txi-#1.tex }%
+ \fi
+ \temp
+ \endgroup
}
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty. Maybe you need to install it? In the current directory
+should work if nowhere else does.}
+
-% Set some numeric style parameters, for 8.5 x 11 format.
+% @documentencoding should change something in TeX eventually, most
+% likely, but for now just recognize it.
+\let\documentencoding = \comment
-%\hsize = 6.5in
+
+% Page size parameters.
+%
\newdimen\defaultparindent \defaultparindent = 15pt
-\parindent = \defaultparindent
-\parskip 18pt plus 1pt
-\setleading{15pt}
-\advance\topskip by 1.2cm
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
% Prevent underfull vbox error messages.
-\vbadness=10000
+\vbadness = 10000
+
+% Don't be so finicky about underfull hboxes, either.
+\hbadness = 2000
% Following George Bush, just get rid of widows and orphans.
\widowpenalty=10000
% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
% using an old version of TeX, don't do anything. We want the amount of
% stretch added to depend on the line length, hence the dependence on
-% \hsize. This makes it come to about 9pt for the 8.5x11 format.
+% \hsize. We call this whenever the paper size is set.
%
-\ifx\emergencystretch\thisisundefined
- % Allow us to assign to \emergencystretch anyway.
- \def\emergencystretch{\dimen0}%
-\else
- \emergencystretch = \hsize
- \divide\emergencystretch by 45
-\fi
+\def\setemergencystretch{%
+ \ifx\emergencystretch\thisisundefined
+ % Allow us to assign to \emergencystretch anyway.
+ \def\emergencystretch{\dimen0}%
+ \else
+ \emergencystretch = .15\hsize
+ \fi
+}
-% Use @smallbook to reset parameters for 7x9.5 format (or else 7x9.25)
-\def\smallbook{
+% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
+% 4) hoffset; 5) binding offset; 6) topskip; 7) physical page height; 8)
+% physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading. The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+ \voffset = #3\relax
+ \topskip = #6\relax
+ \splittopskip = \topskip
+ %
+ \vsize = #1\relax
+ \advance\vsize by \topskip
+ \outervsize = \vsize
+ \advance\outervsize by 2\topandbottommargin
+ \pageheight = \vsize
+ %
+ \hsize = #2\relax
+ \outerhsize = \hsize
+ \advance\outerhsize by 0.5in
+ \pagewidth = \hsize
+ %
+ \normaloffset = #4\relax
+ \bindingoffset = #5\relax
+ %
+ \ifpdf
+ \pdfpageheight #7\relax
+ \pdfpagewidth #8\relax
+ \fi
+ %
+ \setleading{\textleading}
+ %
+ \parindent = \defaultparindent
+ \setemergencystretch
+}
-% These values for secheadingskip and subsecheadingskip are
-% experiments. RJC 7 Aug 1992
-% was 17pt and 14pt plus 6pt minus 3pt
-\global\secheadingskip = 0pt plus 4pt minus 4pt
-\global\subsecheadingskip = 0pt plus 4pt minus 4pt
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+ \parskip = 3pt plus 2pt minus 1pt
+ \textleading = 13.2pt
+ %
+ % If page is nothing but text, make it come out even.
+ \internalpagesizes{46\baselineskip}{6in}%
+ {\voffset}{.25in}%
+ {\bindingoffset}{36pt}%
+ {11in}{8.5in}%
+}}
-\global\lispnarrowing = 0.3in
-\setleading{12pt}
-\advance\topskip by -1cm
-\global\parskip 3pt plus 1pt
-\global\hsize = 5in
-\global\vsize=7.5in
-\global\tolerance=700
-\global\hfuzz=1pt
-\global\contentsrightmargin=0pt
-\global\deftypemargin=0pt
-\global\defbodyindent=.5cm
+% Use @smallbook to reset parameters for 7x9.5 (or so) format.
+\def\smallbook{{\globaldefs = 1
+ \parskip = 2pt plus 1pt
+ \textleading = 12pt
+ %
+ \internalpagesizes{7.5in}{5in}%
+ {\voffset}{.25in}%
+ {\bindingoffset}{16pt}%
+ {9.25in}{7in}%
+ %
+ \lispnarrowing = 0.3in
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = .5cm
+}}
-\global\pagewidth=\hsize
-\global\pageheight=\vsize
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+ \parskip = 3pt plus 2pt minus 1pt
+ \textleading = 13.2pt
+ %
+ % Double-side printing via postscript on Laserjet 4050
+ % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+ % To change the settings for a different printer or situation, adjust
+ % \normaloffset until the front-side and back-side texts align. Then
+ % do the same for \bindingoffset. You can set these for testing in
+ % your texinfo source file like this:
+ % @tex
+ % \global\normaloffset = -6mm
+ % \global\bindingoffset = 10mm
+ % @end tex
+ \internalpagesizes{51\baselineskip}{160mm}
+ {\voffset}{\hoffset}%
+ {\bindingoffset}{44pt}%
+ {297mm}{210mm}%
+ %
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = 5mm
+}}
-\global\let\smalllisp=\smalllispx
-\global\let\smallexample=\smalllispx
-\global\def\Esmallexample{\Esmalllisp}
-}
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+ \parskip = 2pt plus 1pt minus 0.1pt
+ \textleading = 12.5pt
+ %
+ \internalpagesizes{160mm}{120mm}%
+ {\voffset}{\hoffset}%
+ {\bindingoffset}{8pt}%
+ {210mm}{148mm}%
+ %
+ \lispnarrowing = 0.2in
+ \tolerance = 800
+ \hfuzz = 1.2pt
+ \contentsrightmargin = 0pt
+ \defbodyindent = 2mm
+ \tableindent = 12mm
+}}
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{
-\global\tolerance=700
-\global\hfuzz=1pt
-\setleading{12pt}
-\global\parskip 15pt plus 1pt
-
-\global\vsize= 53\baselineskip
-\advance\vsize by \topskip
-%\global\hsize= 5.85in % A4 wide 10pt
-\global\hsize= 6.5in
-\global\outerhsize=\hsize
-\global\advance\outerhsize by 0.5in
-\global\outervsize=\vsize
-\global\advance\outervsize by 0.6in
-
-\global\pagewidth=\hsize
-\global\pageheight=\vsize
-}
-
-% Allow control of the text dimensions. Parameters in order: textheight;
-% textwidth; \voffset; \hoffset (!); binding offset. All require a dimension;
-% header is additional; added length extends the bottom of the page.
-
-\def\changepagesizes#1#2#3#4#5{
- \global\vsize= #1
- \advance\vsize by \topskip
- \global\voffset= #3
- \global\hsize= #2
- \global\outerhsize=\hsize
- \global\advance\outerhsize by 0.5in
- \global\outervsize=\vsize
- \global\advance\outervsize by 0.6in
- \global\pagewidth=\hsize
- \global\pageheight=\vsize
- \global\normaloffset= #4
- \global\bindingoffset= #5}
-
-% This layout is compatible with Latex on A4 paper.
-
-\def\afourlatex{\changepagesizes{22cm}{15cm}{7mm}{4.6mm}{5mm}}
-
-% Use @afourwide to print on European A4 paper in wide format.
-\def\afourwide{\afourpaper
-\changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}}
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+ \afourpaper
+ \internalpagesizes{237mm}{150mm}%
+ {\voffset}{4.6mm}%
+ {\bindingoffset}{7mm}%
+ {297mm}{210mm}%
+ %
+ % Must explicitly reset to 0 because we call \afourpaper.
+ \globaldefs = 0
+}}
+
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+ \afourpaper
+ \internalpagesizes{241mm}{165mm}%
+ {\voffset}{-2.95mm}%
+ {\bindingoffset}{7mm}%
+ {297mm}{210mm}%
+ \globaldefs = 0
+}}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\def\pagesizes{\parsearg\pagesizesxxx}
+\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+ \globaldefs = 1
+ %
+ \parskip = 3pt plus 2pt minus 1pt
+ \setleading{\textleading}%
+ %
+ \dimen0 = #1
+ \advance\dimen0 by \voffset
+ %
+ \dimen2 = \hsize
+ \advance\dimen2 by \normaloffset
+ %
+ \internalpagesizes{#1}{\hsize}%
+ {\voffset}{\normaloffset}%
+ {\bindingoffset}{44pt}%
+ {\dimen0}{\dimen2}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+
+\message{and turning on texinfo input format.}
% Define macros to output various characters with catcode for normal text.
\catcode`\"=\other
\catcode`\<=\other
\catcode`\>=\other
\catcode`\+=\other
+\catcode`\$=\other
\def\normaldoublequote{"}
\def\normaltilde{~}
\def\normalcaret{^}
\def\normalless{<}
\def\normalgreater{>}
\def\normalplus{+}
+\def\normaldollar{$}%$ font-lock fix
% This macro is used to make a character print one way in ttfont
% where it can probably just be output, and another way in other fonts,
% interword stretch (and shrink), and it is reasonable to expect all
% typewriter fonts to have this, we can check that font parameter.
%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi}
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font. Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts. But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
% Turn off all special characters except @
% (and those which the user can use as if they were ordinary).
% use math or other variants that look better in normal text.
\catcode`\"=\active
-\def\activedoublequote{{\tt \char '042}}
+\def\activedoublequote{{\tt\char34}}
\let"=\activedoublequote
\catcode`\~=\active
-\def~{{\tt \char '176}}
+\def~{{\tt\char126}}
\chardef\hat=`\^
\catcode`\^=\active
-\def\auxhat{\def^{'hat}}
\def^{{\tt \hat}}
\catcode`\_=\active
\def_{\ifusingtt\normalunderscore\_}
% Subroutine for the previous macro.
-\def\_{\lvvmode \kern.06em \vbox{\hrule width.3em height.1ex}}
-
-% \lvvmode is equivalent in function to \leavevmode.
-% Using \leavevmode runs into trouble when written out to
-% an index file due to the expansion of \leavevmode into ``\unhbox
-% \voidb@x'' ---which looks to TeX like ``\unhbox \voidb\x'' due to our
-% magic tricks with @.
-\def\lvvmode{\vbox to 0pt{}}
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
\catcode`\|=\active
-\def|{{\tt \char '174}}
+\def|{{\tt\char124}}
\chardef \less=`\<
\catcode`\<=\active
\def<{{\tt \less}}
\def>{{\tt \gtr}}
\catcode`\+=\active
\def+{{\tt \char 43}}
-%\catcode 27=\active
-%\def^^[{$\diamondsuit$}
+\catcode`\$=\active
+\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
% Set up an active definition for =, but don't enable it most of the time.
{\catcode`\==\active
\catcode`\@=0
-% \rawbackslashxx output one backslash character in current font
+% \rawbackslashxx outputs one backslash character in current font,
+% as in \char`\\.
\global\chardef\rawbackslashxx=`\\
-%{\catcode`\\=\other
-%@gdef@rawbackslashxx{\}}
-% \rawbackslash redefines \ as input to do \rawbackslashxx.
+% \rawbackslash defines an active \ to do \rawbackslashxx.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.
{\catcode`\\=\active
-@gdef@rawbackslash{@let\=@rawbackslashxx }}
+ @gdef@rawbackslash{@let\=@rawbackslashxx}
+ @gdef@otherbackslash{@let\=@realbackslash}
+}
+
+% \realbackslash is an actual character `\' with catcode other.
+{\catcode`\\=\other @gdef@realbackslash{\}}
% \normalbackslash outputs one backslash in fixed width font.
\def\normalbackslash{{\tt\rawbackslashxx}}
-% Say @foo, not \foo, in error messages.
-\escapechar=`\@
-
-% \catcode 17=0 % Define control-q
\catcode`\\=\active
% Used sometimes to turn off (effectively) the active characters
% even after parsing them.
-@def@turnoffactive{@let"=@normaldoublequote
-@let\=@realbackslash
-@let~=@normaltilde
-@let^=@normalcaret
-@let_=@normalunderscore
-@let|=@normalverticalbar
-@let<=@normalless
-@let>=@normalgreater
-@let+=@normalplus}
-
-@def@normalturnoffactive{@let"=@normaldoublequote
-@let\=@normalbackslash
-@let~=@normaltilde
-@let^=@normalcaret
-@let_=@normalunderscore
-@let|=@normalverticalbar
-@let<=@normalless
-@let>=@normalgreater
-@let+=@normalplus}
+@def@turnoffactive{%
+ @let"=@normaldoublequote
+ @let\=@realbackslash
+ @let~=@normaltilde
+ @let^=@normalcaret
+ @let_=@normalunderscore
+ @let|=@normalverticalbar
+ @let<=@normalless
+ @let>=@normalgreater
+ @let+=@normalplus
+ @let$=@normaldollar %$ font-lock fix
+}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'. (Thus, \ is not expandable when this is in
+% effect.)
+%
+@def@normalturnoffactive{@turnoffactive @let\=@normalbackslash}
% Make _ and + \other characters, temporarily.
% This is canceled by @fixbackslash.
% Also back turn on active characters that might appear in the input
% file name, in case not using a pre-dumped format.
%
-@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
- @catcode`+=@active @catcode`@_=@active}
+@gdef@fixbackslash{%
+ @ifx\@eatinput @let\ = @normalbackslash @fi
+ @catcode`+=@active
+ @catcode`@_=@active
+}
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
-%% These look ok in all fonts, so just make them not special. The @rm below
-%% makes sure that the current font starts out as the newly loaded cmr10
-@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other
+% These look ok in all fonts, so just make them not special.
+@catcode`@& = @other
+@catcode`@# = @other
+@catcode`@% = @other
+@c Set initial fonts.
@textfonts
@rm
+
@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
@c page-delimiter: "^\\\\message"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
@c End:
-#! /bin/sh
+#!/bin/sh
#
# install - install a program, script, or datafile
-# This comes from X11R5.
+#
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
# set DOITPROG to echo to test this script
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
-tranformbasename=""
+transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
while [ x"$1" != x ]; do
case $1 in
- -c) instcmd="$cpprog"
+ -c) instcmd=$cpprog
shift
continue;;
shift
continue;;
- -s) stripcmd="$stripprog"
+ -s) stripcmd=$stripprog
shift
continue;;
if [ x"$src" = x ]
then
- echo "install: no input file specified"
+ echo "$0: no input file specified" >&2
exit 1
else
- true
+ :
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
-
- if [ -d $dst ]; then
+
+ if [ -d "$dst" ]; then
instcmd=:
+ chmodcmd=""
else
- instcmd=mkdir
+ instcmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
+# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
- if [ -f $src -o -d $src ]
+ if [ -f "$src" ] || [ -d "$src" ]
then
- true
+ :
else
- echo "install: $src does not exist"
+ echo "$0: $src does not exist" >&2
exit 1
fi
-
+
if [ x"$dst" = x ]
then
- echo "install: no destination specified"
+ echo "$0: no destination specified" >&2
exit 1
else
- true
+ :
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
- if [ -d $dst ]
+ if [ -d "$dst" ]
then
- dst="$dst"/`basename $src`
+ dst=$dst/`basename "$src"`
else
- true
+ :
fi
fi
## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
+defaultIFS='
+ '
+IFS="${IFS-$defaultIFS}"
-oIFS="${IFS}"
+oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
+set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS=$oIFS
pathcomp=''
while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
+ pathcomp=$pathcomp$1
shift
- if [ ! -d "${pathcomp}" ] ;
+ if [ ! -d "$pathcomp" ] ;
then
- $mkdirprog "${pathcomp}"
+ $mkdirprog "$pathcomp"
else
- true
+ :
fi
- pathcomp="${pathcomp}/"
+ pathcomp=$pathcomp/
done
fi
if [ x"$dir_arg" != x ]
then
- $doit $instcmd $dst &&
+ $doit $instcmd "$dst" &&
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
else
# If we're going to rename the final executable, determine the name now.
- if [ x"$transformarg" = x ]
+ if [ x"$transformarg" = x ]
then
- dstfile=`basename $dst`
+ dstfile=`basename "$dst"`
else
- dstfile=`basename $dst $transformbasename |
+ dstfile=`basename "$dst" $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
- if [ x"$dstfile" = x ]
+ if [ x"$dstfile" = x ]
then
- dstfile=`basename $dst`
+ dstfile=`basename "$dst"`
else
- true
+ :
fi
-# Make a temp file name in the proper directory.
+# Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/#inst.$$#
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
-# Move or copy the file name to the temp name
+# Trap to clean up temp files at exit.
+
+ trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
+ trap '(exit $?); exit' 1 2 13 15
- $doit $instcmd $src $dsttmp &&
+# Move or copy the file name to the temp name
- trap "rm -f ${dsttmp}" 0 &&
+ $doit $instcmd "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+ if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
+ if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
+ if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
+ if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
+
+# Now remove or move aside any old file at destination location. We try this
+# two ways since rm can't unlink itself on some systems and the destination
+# file might be busy for other reasons. In this case, the final cleanup
+# might fail but the new file should still install successfully.
+
+{
+ if [ -f "$dstdir/$dstfile" ]
+ then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
+ $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
+ {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit
+ }
+ else
+ :
+ fi
+} &&
# Now rename the file to the real destination.
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
fi &&
+# The final little trick to "correctly" pass the exit status to the exit trap.
-exit 0
+{
+ (exit 0); exit
+}
-Thu Oct 9 13:41:22 1997 Ben Pfaff <blp@gnu.org>
+2003-05-22 GNU <bug-gnu-gettext@gnu.org>
- * Makefile.in: (INCLUDES) Add -I$(top_srcdir)/src.
+ * Version 0.12.1 released.
-1997-09-06 02:10 Ulrich Drepper <drepper@cygnus.com>
-
- * intlh.inst.in: Reformat copyright.
-
-1997-08-19 15:22 Ulrich Drepper <drepper@cygnus.com>
-
- * dcgettext.c (DCGETTEXT): Remove wrong comment.
-
-1997-08-16 00:13 Ulrich Drepper <drepper@cygnus.com>
-
- * Makefile.in (install-data): Don't change directory to install.
-
-1997-08-01 14:30 Ulrich Drepper <drepper@cygnus.com>
-
- * cat-compat.c: Fix copyright.
-
- * localealias.c: Don't define strchr unless !HAVE_STRCHR.
-
- * loadmsgcat.c: Update copyright. Fix typos.
-
- * l10nflist.c: Don't define strchr unless !HAVE_STRCHR.
- (_nl_make_l10nflist): Handle sponsor and revision correctly.
-
- * gettext.c: Update copyright.
- * gettext.h: Likewise.
- * hash-string.h: Likewise.
-
- * finddomain.c: Remoave dead code. Define strchr only if
- !HAVE_STRCHR.
-
- * explodename.c: Include <sys/types.h>.
-
- * explodename.c: Reformat copyright text.
- (_nl_explode_name): Fix typo.
-
- * dcgettext.c: Define and use __set_errno.
- (guess_category_value): Don't use setlocale if HAVE_LC_MESSAGES is
- not defined.
-
- * bindtextdom.c: Pretty printing.
-
-1997-05-01 02:25 Ulrich Drepper <drepper@cygnus.com>
-
- * dcgettext.c (guess_category_value): Don't depend on
- HAVE_LC_MESSAGES. We don't need the macro here.
- Patch by Bruno Haible <haible@ilog.fr>.
-
- * cat-compat.c (textdomain): DoN't refer to HAVE_SETLOCALE_NULL
- macro. Instead use HAVE_LOCALE_NULL and define it when using
- glibc, as in dcgettext.c.
- Patch by Bruno Haible <haible@ilog.fr>.
-
- * Makefile.in (CPPFLAGS): New variable. Reported by Franc,ois
- Pinard.
-
-Mon Mar 10 06:51:17 1997 Ulrich Drepper <drepper@cygnus.com>
-
- * Makefile.in: Implement handling of libtool.
-
- * gettextP.h: Change data structures for use of generic lowlevel
- i18n file handling.
-
-Wed Dec 4 20:21:18 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * textdomain.c: Put parentheses around arguments of memcpy macro
- definition.
- * localealias.c: Likewise.
- * l10nflist.c: Likewise.
- * finddomain.c: Likewise.
- * bindtextdom.c: Likewise.
- Reported by Thomas Esken.
-
-Mon Nov 25 22:57:51 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * textdomain.c: Move definition of `memcpy` macro to right
- position.
-
-Fri Nov 22 04:01:58 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * finddomain.c [!HAVE_STRING_H && !_LIBC]: Define memcpy using
- bcopy if not already defined. Reported by Thomas Esken.
- * bindtextdom.c: Likewise.
- * l10nflist.c: Likewise.
- * localealias.c: Likewise.
- * textdomain.c: Likewise.
-
-Tue Oct 29 11:10:27 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * Makefile.in (libdir): Change to use exec_prefix instead of
- prefix. Reported by Knut-HåvardAksnes <etokna@eto.ericsson.se>.
-
-Sat Aug 31 03:07:09 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * l10nflist.c (_nl_normalize_codeset): We convert to lower case,
- so don't prepend uppercase `ISO' for only numeric arg.
-
-Fri Jul 19 00:15:46 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * l10nflist.c: Move inclusion of argz.h, ctype.h, stdlib.h after
- definition of _GNU_SOURCE. Patch by Roland McGrath.
-
- * Makefile.in (uninstall): Fix another bug with `for' loop and
- empty arguments. Patch by Jim Meyering. Correct name os
- uninstalled files: no intl- prefix anymore.
-
- * Makefile.in (install-data): Again work around shells which
- cannot handle mpty for list. Reported by Jim Meyering.
-
-Sat Jul 13 18:11:35 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * Makefile.in (install): Split goal. Now depend on install-exec
- and install-data.
- (install-exec, install-data): New goals. Created from former
- install goal.
- Reported by Karl Berry.
-
-Sat Jun 22 04:58:14 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * Makefile.in (MKINSTALLDIRS): New variable. Path to
- mkinstalldirs script.
- (install): use MKINSTALLDIRS variable or if the script is not present
- try to find it in the $top_scrdir).
-
-Wed Jun 19 02:56:56 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * l10nflist.c: Linux libc *partly* includes the argz_* functions.
- Grr. Work around by renaming the static version and use macros
- for renaming.
-
-Tue Jun 18 20:11:17 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * l10nflist.c: Correct presence test macros of __argz_* functions.
-
- * l10nflist.c: Include <argz.h> based on test of it instead when
- __argz_* functions are available.
- Reported by Andreas Schwab.
-
-Thu Jun 13 15:17:44 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * explodename.c, l10nflist.c: Define NULL for dumb systems.
-
-Tue Jun 11 17:05:13 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * intlh.inst.in, libgettext.h (dcgettext): Rename local variable
- result to __result to prevent name clash.
-
- * l10nflist.c, localealias.c, dcgettext.c: Define _GNU_SOURCE to
- get prototype for stpcpy and strcasecmp.
-
- * intlh.inst.in, libgettext.h: Move declaration of
- `_nl_msg_cat_cntr' outside __extension__ block to prevent warning
- from gcc's -Wnested-extern option.
-
-Fri Jun 7 01:58:00 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * Makefile.in (install): Remove comment.
-
-Thu Jun 6 17:28:17 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * Makefile.in (install): Work around for another Buglix stupidity.
- Always use an `else' close for `if's. Reported by Nelson Beebe.
-
- * Makefile.in (intlh.inst): Correct typo in phony rule.
- Reported by Nelson Beebe.
-
-Thu Jun 6 01:49:52 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * dcgettext.c (read_alias_file): Rename variable alloca_list to
- block_list as the macro calls assume.
- Patch by Eric Backus.
-
- * localealias.c [!HAVE_ALLOCA]: Define alloca as macro using
- malloc.
- (read_alias_file): Rename varriabe alloca_list to block_list as the
- macro calls assume.
- Patch by Eric Backus.
-
- * l10nflist.c: Correct conditional for <argz.h> inclusion.
- Reported by Roland McGrath.
-
- * Makefile.in (all): Depend on all-@USE_INCLUDED_LIBINTL@, not
- all-@USE_NLS@.
-
- * Makefile.in (install): intlh.inst comes from local dir, not
- $(srcdir).
-
- * Makefile.in (intlh.inst): Special handling of this goal. If
- used in gettext, this is really a rul to construct this file. If
- used in any other package it is defined as a .PHONY rule with
- empty body.
-
- * finddomain.c: Extract locale file information handling into
- l10nfile.c. Rename local stpcpy__ function to stpcpy.
-
- * dcgettext.c (stpcpy): Add local definition.
-
- * l10nflist.c: Solve some portability problems. Patches partly by
- Thomas Esken. Add local definition of stpcpy.
-
-Tue Jun 4 02:47:49 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * intlh.inst.in: Don't depend including <locale.h> on
- HAVE_LOCALE_H. Instead configure must rewrite this fiile
- depending on the result of the configure run.
-
- * Makefile.in (install): libintl.inst is now called intlh.inst.
- Add rules for updating intlh.inst from intlh.inst.in.
-
- * libintl.inst: Renamed to intlh.inst.in.
-
- * localealias.c, dcgettext.c [__GNUC__]: Define HAVE_ALLOCA to 1
- because gcc has __buitlin_alloca.
- Reported by Roland McGrath.
-
-Mon Jun 3 00:32:16 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * Makefile.in (installcheck): New goal to fulfill needs of
- automake's distcheck.
-
- * Makefile.in (install): Reorder commands so that VERSION is
- found.
-
- * Makefile.in (gettextsrcdir): Now use subdirectory intl/ in
- @datadir@/gettext.
- (COMSRCS): Add l10nfile.c.
- (OBJECTS): Add l10nfile.o.
- (DISTFILES): Rename to DISTFILE.normal. Remove $(DISTFILES.common).
- (DISTFILE.gettext): Remove $(DISTFILES.common).
- (all-gettext): Remove goal.
- (install): If $(PACKAGE) = gettext install, otherwose do nothing. No
- package but gettext itself should install libintl.h + headers.
- (dist): Extend goal to work for gettext, too.
- (dist-gettext): Remove goal.
-
- * dcgettext.c [!HAVE_ALLOCA]: Define macro alloca by using malloc.
-
-Sun Jun 2 17:33:06 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * loadmsgcat.c (_nl_load_domain): Parameter is now comes from
- find_l10nfile.
-
-Sat Jun 1 02:23:03 1996 Ulrich Drepper <drepper@cygnus.com>
-
- * l10nflist.c (__argz_next): Add definition.
-
- * dcgettext.c [!HAVE_ALLOCA]: Add code for handling missing alloca
- code. Use new l10nfile handling.
-
- * localealias.c [!HAVE_ALLOCA]: Add code for handling missing
- alloca code.
-
- * l10nflist.c: Initial revision.
-
-Tue Apr 2 18:51:18 1996 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (all-gettext): New goal. Same as all-yes.
-
-Thu Mar 28 23:01:22 1996 Karl Eichwalder <ke@ke.central.de>
-
- * Makefile.in (gettextsrcdir): Define using @datadir@.
-
-Tue Mar 26 12:39:14 1996 Ulrich Drepper <drepper@myware>
-
- * finddomain.c: Include <ctype.h>. Reported by Roland McGrath.
-
-Sat Mar 23 02:00:35 1996 Ulrich Drepper <drepper@myware>
-
- * finddomain.c (stpcpy): Rename to stpcpy__ to prevent clashing
- with external declaration.
-
-Sat Mar 2 00:47:09 1996 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (all-no): Rename from all_no.
-
-Sat Feb 17 00:25:59 1996 Ulrich Drepper <drepper@myware>
-
- * gettextP.h [loaded_domain]: Array `successor' must now contain up
- to 63 elements (because of codeset name normalization).
-
- * finddomain.c: Implement codeset name normalization.
-
-Thu Feb 15 04:39:09 1996 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (all): Define to `all-@USE_NLS@'.
- (all-yes, all_no): New goals. `all-no' is noop, `all-yes'
- is former all.
-
-Mon Jan 15 21:46:01 1996 Howard Gayle <howard@hal.com>
-
- * localealias.c (alias_compare): Increment string pointers in loop
- of strcasecmp replacement.
-
-Fri Dec 29 21:16:34 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (install-src): Who commented this goal out ? :-)
-
-Fri Dec 29 15:08:16 1995 Ulrich Drepper <drepper@myware>
-
- * dcgettext.c (DCGETTEXT): Save `errno'. Failing system calls
- should not effect it because a missing catalog is no error.
- Reported by Harald K<o:>nig <koenig@tat.physik.uni-tuebingen.de>.
-
-Tue Dec 19 22:09:13 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (Makefile): Explicitly use $(SHELL) for running
- shell scripts.
-
-Fri Dec 15 17:34:59 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
-
- * Makefile.in (install-src): Only install library and header when
- we use the own implementation. Don't do it when using the
- system's gettext or catgets functions.
-
- * dcgettext.c (find_msg): Must not swap domain->hash_size here.
-
-Sat Dec 9 16:24:37 1995 Ulrich Drepper <drepper@myware>
-
- * localealias.c, libintl.inst, libgettext.h, hash-string.h,
- gettextP.h, finddomain.c, dcgettext.c, cat-compat.c:
- Use PARAMS instead of __P. Suggested by Roland McGrath.
-
-Tue Dec 5 11:39:14 1995 Larry Schwimmer <rosebud@cyclone.stanford.edu>
-
- * libgettext.h: Use `#if !defined (_LIBINTL_H)' instead of `#if
- !_LIBINTL_H' because Solaris defines _LIBINTL_H as empty.
-
-Mon Dec 4 15:42:07 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (install-src):
- Install libintl.inst instead of libintl.h.install.
-
-Sat Dec 2 22:51:38 1995 Marcus Daniels <marcus@sysc.pdx.edu>
-
- * cat-compat.c (textdomain):
- Reverse order in which files are tried you load. First
- try local file, when this failed absolute path.
-
-Wed Nov 29 02:03:53 1995 Nelson H. F. Beebe <beebe@math.utah.edu>
-
- * cat-compat.c (bindtextdomain): Add missing { }.
-
-Sun Nov 26 18:21:41 1995 Ulrich Drepper <drepper@myware>
-
- * libintl.inst: Add missing __P definition. Reported by Nelson Beebe.
-
- * Makefile.in:
- Add dummy `all' and `dvi' goals. Reported by Tom Tromey.
-
-Sat Nov 25 16:12:01 1995 Franc,ois Pinard <pinard@iro.umontreal.ca>
-
- * hash-string.h: Capitalize arguments of macros.
-
-Sat Nov 25 12:01:36 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (DISTFILES): Prevent files names longer than 13
- characters. libintl.h.glibc->libintl.glibc,
- libintl.h.install->libintl.inst. Reported by Joshua R. Poulson.
-
-Sat Nov 25 11:31:12 1995 Eric Backus <ericb@lsid.hp.com>
-
- * dcgettext.c: Fix bug in preprocessor conditionals.
-
-Sat Nov 25 02:35:27 1995 Nelson H. F. Beebe <beebe@math.utah.edu>
-
- * libgettext.h: Solaris cc does not understand
- #if !SYMBOL1 && !SYMBOL2. Sad but true.
-
-Thu Nov 23 16:22:14 1995 Ulrich Drepper <drepper@myware>
-
- * hash-string.h (hash_string):
- Fix for machine with >32 bit `unsigned long's.
-
- * dcgettext.c (DCGETTEXT):
- Fix horrible bug in loop for alternative translation.
-
-Thu Nov 23 01:45:29 1995 Ulrich Drepper <drepper@myware>
-
- * po2tbl.sed.in, linux-msg.sed, xopen-msg.sed:
- Some further simplifications in message number generation.
-
-Mon Nov 20 21:08:43 1995 Ulrich Drepper <drepper@myware>
-
- * libintl.h.glibc: Use __const instead of const in prototypes.
-
- * Makefile.in (install-src):
- Install libintl.h.install instead of libintl.h. This
- is a stripped-down version. Suggested by Peter Miller.
-
- * libintl.h.install, libintl.h.glibc: Initial revision.
-
- * localealias.c (_nl_expand_alias, read_alias_file):
- Protect prototypes in type casts by __P.
-
-Tue Nov 14 16:43:58 1995 Ulrich Drepper <drepper@myware>
-
- * hash-string.h: Correct prototype for hash_string.
-
-Sun Nov 12 12:42:30 1995 Ulrich Drepper <drepper@myware>
-
- * hash-string.h (hash_string): Add prototype.
-
- * gettextP.h: Fix copyright.
- (SWAP): Add prototype.
-
-Wed Nov 8 22:56:33 1995 Ulrich Drepper <drepper@myware>
-
- * localealias.c (read_alias_file): Forgot sizeof.
- Avoid calling *printf function. This introduces a big overhead.
- Patch by Roland McGrath.
-
-Tue Nov 7 14:21:08 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c, cat-compat.c: Wrong indentation in #if for stpcpy.
-
- * finddomain.c (stpcpy):
- Define substitution function local. The macro was to flaky.
-
- * cat-compat.c: Fix typo.
-
- * xopen-msg.sed, linux-msg.sed:
- While bringing message number to right place only accept digits.
-
- * linux-msg.sed, xopen-msg.sed: Now that the counter does not have
- leading 0s we don't need to remove them. Reported by Marcus
- Daniels.
-
- * Makefile.in (../po/cat-id-tbl.o): Use $(top_srdir) in
- dependency. Reported by Marcus Daniels.
-
- * cat-compat.c: (stpcpy) [!_LIBC && !HAVE_STPCPY]: Define replacement.
- Generally cleanup using #if instead of #ifndef.
-
- * Makefile.in: Correct typos in comment. By Franc,ois Pinard.
-
-Mon Nov 6 00:27:02 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (install-src): Don't install libintl.h and libintl.a
- if we use an available gettext implementation.
-
-Sun Nov 5 22:02:08 1995 Ulrich Drepper <drepper@myware>
-
- * libgettext.h: Fix typo: HAVE_CATGETTS -> HAVE_CATGETS. Reported
- by Franc,ois Pinard.
-
- * libgettext.h: Use #if instead of #ifdef/#ifndef.
-
- * finddomain.c:
- Comments describing what has to be done should start with FIXME.
-
-Sun Nov 5 19:38:01 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (DISTFILES): Split. Use DISTFILES with normal meaning.
- DISTFILES.common names the files common to both dist goals.
- DISTFILES.gettext are the files only distributed in GNU gettext.
-
-Sun Nov 5 17:32:54 1995 Ulrich Drepper <drepper@myware>
-
- * dcgettext.c (DCGETTEXT): Correct searching in derived locales.
- This was necessary since a change in _nl_find_msg several weeks
- ago. I really don't know this is still not fixed.
-
-Sun Nov 5 12:43:12 1995 Ulrich Drepper <drepper@myware>
-
- * loadmsgcat.c (_nl_load_domain): Test for FILENAME == NULL. This
- might mark a special condition.
-
- * finddomain.c (make_entry_rec): Don't make illegal entry as decided.
-
- * Makefile.in (dist): Suppress error message when ln failed.
- Get files from $(srcdir) explicitly.
-
- * libgettext.h (gettext_const): Rename to gettext_noop.
-
-Fri Nov 3 07:36:50 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c (make_entry_rec):
- Protect against wrong locale names by testing mask.
-
- * libgettext.h (gettext_const): Add macro definition.
- Capitalize macro arguments.
-
-Thu Nov 2 23:15:51 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c (_nl_find_domain):
- Test for pointer != NULL before accessing value.
- Reported by Tom Tromey.
-
- * gettext.c (NULL):
- Define as (void*)0 instad of 0. Reported by Franc,ois Pinard.
-
-Mon Oct 30 21:28:52 1995 Ulrich Drepper <drepper@myware>
-
- * po2tbl.sed.in: Serious typo bug fixed by Jim Meyering.
-
-Sat Oct 28 23:20:47 1995 Ulrich Drepper <drepper@myware>
-
- * libgettext.h: Disable dcgettext optimization for Solaris 2.3.
-
- * localealias.c (alias_compare):
- Peter Miller reported that tolower in some systems is
- even dumber than I thought. Protect call by `isupper'.
-
-Fri Oct 27 22:22:51 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (libdir, includedir): New variables.
- (install-src): Install libintl.a and libintl.h in correct dirs.
-
-Fri Oct 27 22:07:29 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (SOURCES): Fix typo: intrl.compat.c -> intl-compat.c.
-
- * po2tbl.sed.in: Patch for buggy SEDs by Christian von Roques.
-
- * localealias.c:
- Fix typo and superflous test. Reported by Christian von Roques.
-
-Fri Oct 6 11:52:05 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c (_nl_find_domain):
- Correct some remainder from the pre-CEN syntax. Now
- we don't have a constant number of successors anymore.
-
-Wed Sep 27 21:41:13 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (DISTFILES): Add libintl.h.glibc.
-
- * Makefile.in (dist-libc): Add goal for packing sources for glibc.
- (COMSRCS, COMHDRS): Splitted to separate sources shared with glibc.
-
- * loadmsgcat.c: Forget to continue #if line.
-
- * localealias.c:
- [_LIBC]: Rename strcasecmp to __strcasecmp to keep ANSI C name
- space clean.
-
- * dcgettext.c, finddomain.c: Better comment to last change.
-
- * loadmsgcat.c:
- [_LIBC]: Rename fstat, open, close, read, mmap, and munmap to
- __fstat, __open, __close, __read, __mmap, and __munmap resp
- to keep ANSI C name space clean.
-
- * finddomain.c:
- [_LIBC]: Rename stpcpy to __stpcpy to keep ANSI C name space clean.
-
- * dcgettext.c:
- [_LIBC]: Rename getced and stpcpy to __getcwd and __stpcpy resp to
- keep ANSI C name space clean.
-
- * libgettext.h:
- Include sys/types.h for those old SysV systems out there.
- Reported by Francesco Potorti`.
-
- * loadmsgcat.c (use_mmap): Define if compiled for glibc.
-
- * bindtextdom.c: Include all those standard headers
- unconditionally if _LIBC is defined.
-
- * finddomain.c: Fix 2 times defiend -> defined.
-
- * textdomain.c: Include libintl.h instead of libgettext.h when
- compiling for glibc. Include all those standard headers
- unconditionally if _LIBC is defined.
-
- * localealias.c, loadmsgcat.c: Prepare to be compiled in glibc.
-
- * gettext.c:
- Include libintl.h instead of libgettext.h when compiling for glibc.
- Get NULL from stddef.h if we compile for glibc.
-
- * finddomain.c: Include libintl.h instead of libgettext.h when
- compiling for glibc. Include all those standard headers
- unconditionally if _LIBC is defined.
-
- * dcgettext.c: Include all those standard headers unconditionally
- if _LIBC is defined.
-
- * dgettext.c: If compiled in glibc include libintl.h instead of
- libgettext.h.
- (locale.h): Don't rely on HAVE_LOCALE_H when compiling for glibc.
-
- * dcgettext.c: If compiled in glibc include libintl.h instead of
- libgettext.h.
- (getcwd): Don't rely on HAVE_GETCWD when compiling for glibc.
-
- * bindtextdom.c:
- If compiled in glibc include libintl.h instead of libgettext.h.
-
-Mon Sep 25 22:23:06 1995 Ulrich Drepper <drepper@myware>
-
- * localealias.c (_nl_expand_alias): Don't call bsearch if NMAP <= 0.
- Reported by Marcus Daniels.
-
- * cat-compat.c (bindtextdomain):
- String used in putenv must not be recycled.
- Reported by Marcus Daniels.
-
- * libgettext.h (__USE_GNU_GETTEXT):
- Additional symbol to signal that we use GNU gettext
- library.
-
- * cat-compat.c (bindtextdomain):
- Fix bug with the strange stpcpy replacement.
- Reported by Nelson Beebe.
-
-Sat Sep 23 08:23:51 1995 Ulrich Drepper <drepper@myware>
-
- * cat-compat.c: Include <string.h> for stpcpy prototype.
-
- * localealias.c (read_alias_file):
- While expand strdup code temporary variable `cp' hided
- higher level variable with same name. Rename to `tp'.
-
- * textdomain.c (textdomain):
- Avoid warning by using temporary variable in strdup code.
-
- * finddomain.c (_nl_find_domain): Remove unused variable `application'.
-
-Thu Sep 21 15:51:44 1995 Ulrich Drepper <drepper@myware>
-
- * localealias.c (alias_compare):
- Use strcasecmp() only if available. Else use
- implementation in place.
-
- * intl-compat.c:
- Wrapper functions now call *__ functions instead of __*.
-
- * libgettext.h: Declare prototypes for *__ functions instead for __*.
-
- * cat-compat.c, loadmsgcat.c:
- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
- of the standard libc and so prevent libintl.a from being used
- standalone.
-
- * bindtextdom.c:
- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
- of the standard libc and so prevent libintl.a from being used
- standalone.
- Rename to bindtextdomain__ if not used in GNU C Library.
-
- * dgettext.c:
- Rename function to dgettext__ if not used in GNU C Library.
-
- * gettext.c:
- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
- of the standard libc and so prevent libintl.a from being used
- standalone.
- Functions now called gettext__ if not used in GNU C Library.
-
- * dcgettext.c, localealias.c, textdomain.c, finddomain.c:
- Don't use xmalloc, xstrdup, and stpcpy. These functions are not part
- of the standard libc and so prevent libintl.a from being used
- standalone.
-
-Sun Sep 17 23:14:49 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c: Correct some bugs in handling of CEN standard
- locale definitions.
-
-Thu Sep 7 01:49:28 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c: Implement CEN syntax.
-
- * gettextP.h (loaded_domain): Extend number of successors to 31.
-
-Sat Aug 19 19:25:29 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (aliaspath): Remove path to X11 locale dir.
-
- * Makefile.in: Make install-src depend on install. This helps
- gettext to install the sources and other packages can use the
- install goal.
-
-Sat Aug 19 15:19:33 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (uninstall): Remove stuff installed by install-src.
-
-Tue Aug 15 13:13:53 1995 Ulrich Drepper <drepper@myware>
-
- * VERSION.in: Initial revision.
-
- * Makefile.in (DISTFILES):
- Add VERSION file. This is not necessary for gettext, but
- for other packages using this library.
-
-Tue Aug 15 06:16:44 1995 Ulrich Drepper <drepper@myware>
-
- * gettextP.h (_nl_find_domain):
- New prototype after changing search strategy.
-
- * finddomain.c (_nl_find_domain):
- We now try only to find a specified catalog. Fall back to other
- catalogs listed in the locale list is now done in __dcgettext.
-
- * dcgettext.c (__dcgettext):
- Now we provide message fall back even to different languages.
- I.e. if a message is not available in one language all the other
- in the locale list a tried. Formerly fall back was only possible
- within one language. Implemented by moving one loop from
- _nl_find_domain to here.
-
-Mon Aug 14 23:45:50 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (gettextsrcdir):
- Directory where source of GNU gettext library are made
- available.
- (INSTALL, INSTALL_DATA): Programs used for installing sources.
- (gettext-src): New. Rule to install GNU gettext sources for use in
- gettextize shell script.
-
-Sun Aug 13 14:40:48 1995 Ulrich Drepper <drepper@myware>
-
- * loadmsgcat.c (_nl_load_domain):
- Use mmap for loading only when munmap function is
- also available.
-
- * Makefile.in (install): Depend on `all' goal.
-
-Wed Aug 9 11:04:33 1995 Ulrich Drepper <drepper@myware>
-
- * localealias.c (read_alias_file):
- Do not overwrite '\n' when terminating alias value string.
-
- * localealias.c (read_alias_file):
- Handle long lines. Ignore the rest not fitting in
- the buffer after the initial `fgets' call.
-
-Wed Aug 9 00:54:29 1995 Ulrich Drepper <drepper@myware>
-
- * gettextP.h (_nl_load_domain):
- Add prototype, replacing prototype for _nl_load_msg_cat.
-
- * finddomain.c (_nl_find_domain):
- Remove unneeded variable filename and filename_len.
- (expand_alias): Remove prototype because functions does not
- exist anymore.
-
- * localealias.c (read_alias_file):
- Change type of fname_len parameter to int.
- (xmalloc): Add prototype.
-
- * loadmsgcat.c: Better prototypes for xmalloc.
-
-Tue Aug 8 22:30:39 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c (_nl_find_domain):
- Allow alias name to be constructed from the four components.
-
- * Makefile.in (aliaspath): New variable. Set to preliminary value.
- (SOURCES): Add localealias.c.
- (OBJECTS): Add localealias.o.
-
- * gettextP.h: Add prototype for _nl_expand_alias.
-
- * finddomain.c: Aliasing handled in intl/localealias.c.
-
- * localealias.c: Aliasing for locale names.
-
- * bindtextdom.c: Better prototypes for xmalloc and xstrdup.
-
-Mon Aug 7 23:47:42 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (DISTFILES): gettext.perl is now found in misc/.
-
- * cat-compat.c (bindtextdomain):
- Correct implementation. dirname parameter was not used.
- Reported by Marcus Daniels.
-
- * gettextP.h (loaded_domain):
- New fields `successor' and `decided' for oo, lazy
- message handling implementation.
-
- * dcgettext.c:
- Adopt for oo, lazy message handliing.
- Now we can inherit translations from less specific locales.
- (find_msg): New function.
-
- * loadmsgcat.c, finddomain.c:
- Complete rewrite. Implement oo, lazy message handling :-).
- We now have an additional environment variable `LANGUAGE' with
- a higher priority than LC_ALL for the LC_MESSAGE locale.
- Here we can set a colon separated list of specifications each
- of the form `language[_territory[.codeset]][@modifier]'.
-
-Sat Aug 5 09:55:42 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c (unistd.h):
- Include to get _PC_PATH_MAX defined on system having it.
-
-Fri Aug 4 22:42:00 1995 Ulrich Drepper <drepper@myware>
-
- * finddomain.c (stpcpy): Include prototype.
-
- * Makefile.in (dist): Remove `copying instead' message.
-
-Wed Aug 2 18:52:03 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (ID, TAGS): Do not use $^.
-
-Tue Aug 1 20:07:11 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (TAGS, ID): Use $^ as command argument.
- (TAGS): Give etags -o option t write to current directory,
- not $(srcdir).
- (ID): Use $(srcdir) instead os $(top_srcdir)/src.
- (distclean): Remove ID.
-
-Sun Jul 30 11:51:46 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (gnulocaledir):
- New variable, always using share/ for data directory.
- (DEFS): Add GNULOCALEDIR, used in finddomain.c.
-
- * finddomain.c (_nl_default_dirname):
- Set to GNULOCALEDIR, because it always has to point
- to the directory where GNU gettext Library writes it to.
-
- * intl-compat.c (textdomain, bindtextdomain):
- Undefine macros before function definition.
-
-Sat Jul 22 01:10:02 1995 Ulrich Drepper <drepper@myware>
-
- * libgettext.h (_LIBINTL_H):
- Protect definition in case where this file is included as
- libgettext.h on Solaris machines. Add comment about this.
-
-Wed Jul 19 02:36:42 1995 Ulrich Drepper <drepper@myware>
-
- * intl-compat.c (textdomain): Correct typo.
-
-Wed Jul 19 01:51:35 1995 Ulrich Drepper <drepper@myware>
-
- * dcgettext.c (dcgettext): Function now called __dcgettext.
-
- * dgettext.c (dgettext): Now called __dgettext and calls
- __dcgettext.
-
- * gettext.c (gettext):
- Function now called __gettext and calls __dgettext.
-
- * textdomain.c (textdomain): Function now called __textdomain.
-
- * bindtextdom.c (bindtextdomain): Function now called
- __bindtextdomain.
-
- * intl-compat.c: Initial revision.
-
- * Makefile.in (SOURCES): Add intl-compat.c.
- (OBJECTS): We always compile the GNU gettext library functions.
- OBJECTS contains all objects but cat-compat.o, ../po/cat-if-tbl.o,
- and intl-compat.o.
- (GETTOBJS): Contains now only intl-compat.o.
-
- * libgettext.h:
- Re-include protection matches dualistic character of libgettext.h.
- For all functions in GNU gettext library define __ counter part.
-
- * finddomain.c (strchr): Define as index if not found in C library.
- (_nl_find_domain): For relative paths paste / in between.
-
-Tue Jul 18 16:37:45 1995 Ulrich Drepper <drepper@myware>
-
- * loadmsgcat.c, finddomain.c: Add inclusion of sys/types.h.
-
- * xopen-msg.sed: Fix bug with `msgstr ""' lines.
- A little bit better comments.
-
-Tue Jul 18 01:18:27 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in:
- po-mode.el, makelinks, combine-sh are now found in ../misc.
-
- * po-mode.el, makelinks, combine-sh, elisp-comp:
- Moved to ../misc/.
-
- * libgettext.h, gettextP.h, gettext.h: Uniform test for __STDC__.
-
-Sun Jul 16 22:33:02 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (INSTALL, INSTALL_DATA): New variables.
- (install-data, uninstall): Install/uninstall .elc file.
-
- * po-mode.el (Installation comment):
- Add .pox as possible extension of .po files.
-
-Sun Jul 16 13:23:27 1995 Ulrich Drepper <drepper@myware>
-
- * elisp-comp: Complete new version by Franc,ois: This does not
- fail when not compiling in the source directory.
-
-Sun Jul 16 00:12:17 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (../po/cat-id-tbl.o):
- Use $(MAKE) instead of make for recursive make.
-
- * Makefile.in (.el.elc): Use $(SHELL) instead of /bin/sh.
- (install-exec): Add missing dummy goal.
- (install-data, uninstall): @ in multi-line shell command at
- beginning, not in front of echo. Reported by Eric Backus.
-
-Sat Jul 15 00:21:28 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (DISTFILES):
- Rename libgettext.perl to gettext.perl to fit in 14 chars
- file systems.
-
- * gettext.perl:
- Rename to gettext.perl to fit in 14 chars file systems.
-
-Thu Jul 13 23:17:20 1995 Ulrich Drepper <drepper@myware>
-
- * cat-compat.c: If !STDC_HEADERS try to include malloc.h.
-
-Thu Jul 13 20:55:02 1995 Ulrich Drepper <drepper@myware>
-
- * po2tbl.sed.in: Pretty printing.
-
- * linux-msg.sed, xopen-msg.sed:
- Correct bugs with handling substitute flags in branches.
-
- * hash-string.h (hash_string):
- Old K&R compilers don't under stand `unsigned char'.
-
- * gettext.h (nls_uint32):
- Some old K&R compilers (eg HP) don't understand `unsigned int'.
-
- * cat-compat.c (msg_to_cat_id): De-ANSI-fy prototypes.
-
-Thu Jul 13 01:34:33 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (ELCFILES): New variable.
- (DISTFILES): Add elisp-comp.
- Add implicit rule for .el -> .elc compilation.
- (install-data): install $ELCFILES
- (clean): renamed po-to-tbl and po-to-msg to po2tbl and po2msg resp.
-
- * elisp-comp: Initial revision
-
-Wed Jul 12 16:14:52 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in:
- cat-id-tbl.c is now found in po/. This enables us to use an identical
- intl/ directory in all packages.
-
- * dcgettext.c (dcgettext): hashing does not work for table size <= 2.
-
- * textdomain.c: fix typo (#if def -> #if defined)
-
-Tue Jul 11 18:44:43 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in (stamp-cat-id): use top_srcdir to address source files
- (DISTFILES,distclean): move tupdate.perl to src/
-
- * po-to-tbl.sed.in:
- add additional jump to clear change flag to recognize multiline strings
-
-Tue Jul 11 01:32:50 1995 Ulrich Drepper <drepper@myware>
-
- * textdomain.c: Protect inclusion of stdlib.h and string.h.
-
- * loadmsgcat.c: Protect inclusion of stdlib.h.
-
- * libgettext.h: Protect inclusion of locale.h.
- Allow use in C++ programs.
- Define NULL is not happened already.
-
- * Makefile.in (DISTFILES): ship po-to-tbl.sed.in instead of
- po-to-tbl.sed.
- (distclean): remove po-to-tbl.sed and tupdate.perl.
-
- * tupdate.perl.in: Substitute Perl path even in exec line.
- Don't include entries without translation from old .po file.
-
-Tue Jul 4 00:41:51 1995 Ulrich Drepper <drepper@myware>
-
- * tupdate.perl.in: use "Updated: " in msgid "".
-
- * cat-compat.c: Fix typo (LOCALDIR -> LOCALEDIR).
- Define getenv if !__STDC__.
-
- * bindtextdom.c: Protect stdlib.h and string.h inclusion.
- Define free if !__STDC__.
-
- * finddomain.c: Change DEF_MSG_DOM_DIR to LOCALEDIR.
- Define free if !__STDC__.
-
- * cat-compat.c: Change DEF_MSG_DOM_DIR to LOCALEDIR.
-
-Mon Jul 3 23:56:30 1995 Ulrich Drepper <drepper@myware>
-
- * Makefile.in: Use LOCALEDIR instead of DEF_MSG_DOM_DIR.
- Remove unneeded $(srcdir) from Makefile.in dependency.
-
- * makelinks: Add copyright and short description.
-
- * po-mode.el: Last version for 0.7.
-
- * tupdate.perl.in: Fix die message.
-
- * dcgettext.c: Protect include of string.h.
-
- * gettext.c: Protect include of stdlib.h and further tries to get NULL.
-
- * finddomain.c: Some corrections in includes.
-
- * Makefile.in (INCLUDES): Prune list correct path to Makefile.in.
-
- * po-to-tbl.sed: Adopt for new .po file format.
-
- * linux-msg.sed, xopen-msg.sed: Adopt for new .po file format.
-
-Sun Jul 2 23:55:03 1995 Ulrich Drepper <drepper@myware>
-
- * tupdate.perl.in: Complete rewrite for new .po file format.
-
-Sun Jul 2 02:06:50 1995 Ulrich Drepper <drepper@myware>
-
- * First official release. This directory contains all the code
- needed to internationalize own packages. It provides functions
- which allow to use the X/Open catgets function with an interface
- like the Uniforum gettext function. For system which does not
- have neither of those a complete implementation is provided.
-0.10.32
+GNU gettext library from gettext-0.12.1
/* Implementation of the bindtextdomain(3) function
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+ Copyright (C) 1995-1998, 2000, 2001, 2002 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-# include <malloc.h>
-# else
-void free ();
-# endif
-#endif
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
+#ifdef _LIBC
+# include <libintl.h>
#else
-# include <strings.h>
-# ifndef memcpy
-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
+# include "libgnuintl.h"
#endif
+#include "gettextP.h"
#ifdef _LIBC
-# include <libintl.h>
+/* We have to handle multi-threaded applications. */
+# include <bits/libc-lock.h>
#else
-# include "libgettext.h"
+/* Provide dummy implementation if this is outside glibc. */
+# define __libc_rwlock_define(CLASS, NAME)
+# define __libc_rwlock_wrlock(NAME)
+# define __libc_rwlock_unlock(NAME)
+#endif
+
+/* The internal variables in the standalone libintl.a must have different
+ names than the internal variables in GNU libc, otherwise programs
+ using libintl.a cannot be linked statically. */
+#if !defined _LIBC
+# define _nl_default_dirname libintl_nl_default_dirname
+# define _nl_domain_bindings libintl_nl_domain_bindings
+#endif
+
+/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>. */
+#ifndef offsetof
+# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
#endif
-#include "gettext.h"
-#include "gettextP.h"
/* @@ end of prolog @@ */
/* Contains the default location of the message catalogs. */
extern const char _nl_default_dirname[];
+#ifdef _LIBC
+extern const char _nl_default_dirname_internal[] attribute_hidden;
+#else
+# define INTUSE(name) name
+#endif
/* List with bindings of specific domains. */
extern struct binding *_nl_domain_bindings;
+/* Lock variable to protect the global data in the gettext implementation. */
+__libc_rwlock_define (extern, _nl_state_lock attribute_hidden)
+
/* Names for the libintl functions are a problem. They must not clash
with existing names and they should follow ANSI C. But this source
prefix. So we have to make a difference here. */
#ifdef _LIBC
# define BINDTEXTDOMAIN __bindtextdomain
-# define strdup(str) __strdup (str)
+# define BIND_TEXTDOMAIN_CODESET __bind_textdomain_codeset
+# ifndef strdup
+# define strdup(str) __strdup (str)
+# endif
#else
-# define BINDTEXTDOMAIN bindtextdomain__
+# define BINDTEXTDOMAIN libintl_bindtextdomain
+# define BIND_TEXTDOMAIN_CODESET libintl_bind_textdomain_codeset
#endif
-/* Specify that the DOMAINNAME message catalog will be found
- in DIRNAME rather than in the system locale data base. */
-char *
-BINDTEXTDOMAIN (domainname, dirname)
+/* Prototypes for local functions. */
+static void set_binding_values PARAMS ((const char *domainname,
+ const char **dirnamep,
+ const char **codesetp));
+
+/* Specifies the directory name *DIRNAMEP and the output codeset *CODESETP
+ to be used for the DOMAINNAME message catalog.
+ If *DIRNAMEP or *CODESETP is NULL, the corresponding attribute is not
+ modified, only the current value is returned.
+ If DIRNAMEP or CODESETP is NULL, the corresponding attribute is neither
+ modified nor returned. */
+static void
+set_binding_values (domainname, dirnamep, codesetp)
const char *domainname;
- const char *dirname;
+ const char **dirnamep;
+ const char **codesetp;
{
struct binding *binding;
+ int modified;
/* Some sanity checks. */
if (domainname == NULL || domainname[0] == '\0')
- return NULL;
+ {
+ if (dirnamep)
+ *dirnamep = NULL;
+ if (codesetp)
+ *codesetp = NULL;
+ return;
+ }
+
+ __libc_rwlock_wrlock (_nl_state_lock);
+
+ modified = 0;
for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
{
}
}
- if (dirname == NULL)
- /* The current binding has be to returned. */
- return binding == NULL ? (char *) _nl_default_dirname : binding->dirname;
-
if (binding != NULL)
{
- /* The domain is already bound. If the new value and the old
- one are equal we simply do nothing. Otherwise replace the
- old binding. */
- if (strcmp (dirname, binding->dirname) != 0)
+ if (dirnamep)
{
- char *new_dirname;
+ const char *dirname = *dirnamep;
- if (strcmp (dirname, _nl_default_dirname) == 0)
- new_dirname = (char *) _nl_default_dirname;
+ if (dirname == NULL)
+ /* The current binding has be to returned. */
+ *dirnamep = binding->dirname;
else
{
+ /* The domain is already bound. If the new value and the old
+ one are equal we simply do nothing. Otherwise replace the
+ old binding. */
+ char *result = binding->dirname;
+ if (strcmp (dirname, result) != 0)
+ {
+ if (strcmp (dirname, INTUSE(_nl_default_dirname)) == 0)
+ result = (char *) INTUSE(_nl_default_dirname);
+ else
+ {
#if defined _LIBC || defined HAVE_STRDUP
- new_dirname = strdup (dirname);
- if (new_dirname == NULL)
- return NULL;
+ result = strdup (dirname);
#else
- size_t len = strlen (dirname) + 1;
- new_dirname = (char *) malloc (len);
- if (new_dirname == NULL)
- return NULL;
-
- memcpy (new_dirname, dirname, len);
+ size_t len = strlen (dirname) + 1;
+ result = (char *) malloc (len);
+ if (__builtin_expect (result != NULL, 1))
+ memcpy (result, dirname, len);
#endif
+ }
+
+ if (__builtin_expect (result != NULL, 1))
+ {
+ if (binding->dirname != INTUSE(_nl_default_dirname))
+ free (binding->dirname);
+
+ binding->dirname = result;
+ modified = 1;
+ }
+ }
+ *dirnamep = result;
}
+ }
+
+ if (codesetp)
+ {
+ const char *codeset = *codesetp;
- if (binding->dirname != _nl_default_dirname)
- free (binding->dirname);
+ if (codeset == NULL)
+ /* The current binding has be to returned. */
+ *codesetp = binding->codeset;
+ else
+ {
+ /* The domain is already bound. If the new value and the old
+ one are equal we simply do nothing. Otherwise replace the
+ old binding. */
+ char *result = binding->codeset;
+ if (result == NULL || strcmp (codeset, result) != 0)
+ {
+#if defined _LIBC || defined HAVE_STRDUP
+ result = strdup (codeset);
+#else
+ size_t len = strlen (codeset) + 1;
+ result = (char *) malloc (len);
+ if (__builtin_expect (result != NULL, 1))
+ memcpy (result, codeset, len);
+#endif
- binding->dirname = new_dirname;
+ if (__builtin_expect (result != NULL, 1))
+ {
+ if (binding->codeset != NULL)
+ free (binding->codeset);
+
+ binding->codeset = result;
+ binding->codeset_cntr++;
+ modified = 1;
+ }
+ }
+ *codesetp = result;
+ }
}
}
+ else if ((dirnamep == NULL || *dirnamep == NULL)
+ && (codesetp == NULL || *codesetp == NULL))
+ {
+ /* Simply return the default values. */
+ if (dirnamep)
+ *dirnamep = INTUSE(_nl_default_dirname);
+ if (codesetp)
+ *codesetp = NULL;
+ }
else
{
/* We have to create a new binding. */
- size_t len;
+ size_t len = strlen (domainname) + 1;
struct binding *new_binding =
- (struct binding *) malloc (sizeof (*new_binding));
+ (struct binding *) malloc (offsetof (struct binding, domainname) + len);
+
+ if (__builtin_expect (new_binding == NULL, 0))
+ goto failed;
- if (new_binding == NULL)
- return NULL;
+ memcpy (new_binding->domainname, domainname, len);
+
+ if (dirnamep)
+ {
+ const char *dirname = *dirnamep;
+ if (dirname == NULL)
+ /* The default value. */
+ dirname = INTUSE(_nl_default_dirname);
+ else
+ {
+ if (strcmp (dirname, INTUSE(_nl_default_dirname)) == 0)
+ dirname = INTUSE(_nl_default_dirname);
+ else
+ {
+ char *result;
#if defined _LIBC || defined HAVE_STRDUP
- new_binding->domainname = strdup (domainname);
- if (new_binding->domainname == NULL)
- return NULL;
+ result = strdup (dirname);
+ if (__builtin_expect (result == NULL, 0))
+ goto failed_dirname;
#else
- len = strlen (domainname) + 1;
- new_binding->domainname = (char *) malloc (len);
- if (new_binding->domainname == NULL)
- return NULL;
- memcpy (new_binding->domainname, domainname, len);
+ size_t len = strlen (dirname) + 1;
+ result = (char *) malloc (len);
+ if (__builtin_expect (result == NULL, 0))
+ goto failed_dirname;
+ memcpy (result, dirname, len);
#endif
-
- if (strcmp (dirname, _nl_default_dirname) == 0)
- new_binding->dirname = (char *) _nl_default_dirname;
+ dirname = result;
+ }
+ }
+ *dirnamep = dirname;
+ new_binding->dirname = (char *) dirname;
+ }
else
+ /* The default value. */
+ new_binding->dirname = (char *) INTUSE(_nl_default_dirname);
+
+ new_binding->codeset_cntr = 0;
+
+ if (codesetp)
{
+ const char *codeset = *codesetp;
+
+ if (codeset != NULL)
+ {
+ char *result;
+
#if defined _LIBC || defined HAVE_STRDUP
- new_binding->dirname = strdup (dirname);
- if (new_binding->dirname == NULL)
- return NULL;
+ result = strdup (codeset);
+ if (__builtin_expect (result == NULL, 0))
+ goto failed_codeset;
#else
- len = strlen (dirname) + 1;
- new_binding->dirname = (char *) malloc (len);
- if (new_binding->dirname == NULL)
- return NULL;
- memcpy (new_binding->dirname, dirname, len);
+ size_t len = strlen (codeset) + 1;
+ result = (char *) malloc (len);
+ if (__builtin_expect (result == NULL, 0))
+ goto failed_codeset;
+ memcpy (result, codeset, len);
#endif
+ codeset = result;
+ new_binding->codeset_cntr++;
+ }
+ *codesetp = codeset;
+ new_binding->codeset = (char *) codeset;
}
+ else
+ new_binding->codeset = NULL;
/* Now enqueue it. */
if (_nl_domain_bindings == NULL
binding->next = new_binding;
}
- binding = new_binding;
+ modified = 1;
+
+ /* Here we deal with memory allocation failures. */
+ if (0)
+ {
+ failed_codeset:
+ if (new_binding->dirname != INTUSE(_nl_default_dirname))
+ free (new_binding->dirname);
+ failed_dirname:
+ free (new_binding);
+ failed:
+ if (dirnamep)
+ *dirnamep = NULL;
+ if (codesetp)
+ *codesetp = NULL;
+ }
}
- return binding->dirname;
+ /* If we modified any binding, we flush the caches. */
+ if (modified)
+ ++_nl_msg_cat_cntr;
+
+ __libc_rwlock_unlock (_nl_state_lock);
+}
+
+/* Specify that the DOMAINNAME message catalog will be found
+ in DIRNAME rather than in the system locale data base. */
+char *
+BINDTEXTDOMAIN (domainname, dirname)
+ const char *domainname;
+ const char *dirname;
+{
+ set_binding_values (domainname, &dirname, NULL);
+ return (char *) dirname;
+}
+
+/* Specify the character encoding in which the messages from the
+ DOMAINNAME message catalog will be returned. */
+char *
+BIND_TEXTDOMAIN_CODESET (domainname, codeset)
+ const char *domainname;
+ const char *codeset;
+{
+ set_binding_values (domainname, NULL, &codeset);
+ return (char *) codeset;
}
#ifdef _LIBC
-/* Alias for function name in GNU C Library. */
+/* Aliases for function names in GNU C Library. */
weak_alias (__bindtextdomain, bindtextdomain);
+weak_alias (__bind_textdomain_codeset, bind_textdomain_codeset);
#endif
+++ /dev/null
-/* Compatibility code for gettext-using-catgets interface.
- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ifdef HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <string.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-# include <malloc.h>
-# endif
-#endif
-
-#ifdef HAVE_NL_TYPES_H
-# include <nl_types.h>
-#endif
-
-#include "libgettext.h"
-
-/* @@ end of prolog @@ */
-
-/* XPG3 defines the result of `setlocale (category, NULL)' as:
- ``Directs `setlocale()' to query `category' and return the current
- setting of `local'.''
- However it does not specify the exact format. And even worse: POSIX
- defines this not at all. So we can use this feature only on selected
- system (e.g. those using GNU C Library). */
-#ifdef _LIBC
-# define HAVE_LOCALE_NULL
-#endif
-
-/* The catalog descriptor. */
-static nl_catd catalog = (nl_catd) -1;
-
-/* Name of the default catalog. */
-static const char default_catalog_name[] = "messages";
-
-/* Name of currently used catalog. */
-static const char *catalog_name = default_catalog_name;
-
-/* Get ID for given string. If not found return -1. */
-static int msg_to_cat_id PARAMS ((const char *msg));
-
-/* Substitution for systems lacking this function in their C library. */
-#if !_LIBC && !HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-#endif
-
-
-/* Set currently used domain/catalog. */
-char *
-textdomain (domainname)
- const char *domainname;
-{
- nl_catd new_catalog;
- char *new_name;
- size_t new_name_len;
- char *lang;
-
-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES \
- && defined HAVE_LOCALE_NULL
- lang = setlocale (LC_MESSAGES, NULL);
-#else
- lang = getenv ("LC_ALL");
- if (lang == NULL || lang[0] == '\0')
- {
- lang = getenv ("LC_MESSAGES");
- if (lang == NULL || lang[0] == '\0')
- lang = getenv ("LANG");
- }
-#endif
- if (lang == NULL || lang[0] == '\0')
- lang = "C";
-
- /* See whether name of currently used domain is asked. */
- if (domainname == NULL)
- return (char *) catalog_name;
-
- if (domainname[0] == '\0')
- domainname = default_catalog_name;
-
- /* Compute length of added path element. */
- new_name_len = sizeof (LOCALEDIR) - 1 + 1 + strlen (lang)
- + sizeof ("/LC_MESSAGES/") - 1 + sizeof (PACKAGE) - 1
- + sizeof (".cat");
-
- new_name = (char *) malloc (new_name_len);
- if (new_name == NULL)
- return NULL;
-
- strcpy (new_name, PACKAGE);
- new_catalog = catopen (new_name, 0);
-
- if (new_catalog == (nl_catd) -1)
- {
- /* NLSPATH search didn't work, try absolute path */
- sprintf (new_name, "%s/%s/LC_MESSAGES/%s.cat", LOCALEDIR, lang,
- PACKAGE);
- new_catalog = catopen (new_name, 0);
-
- if (new_catalog == (nl_catd) -1)
- {
- free (new_name);
- return (char *) catalog_name;
- }
- }
-
- /* Close old catalog. */
- if (catalog != (nl_catd) -1)
- catclose (catalog);
- if (catalog_name != default_catalog_name)
- free ((char *) catalog_name);
-
- catalog = new_catalog;
- catalog_name = new_name;
-
- return (char *) catalog_name;
-}
-
-char *
-bindtextdomain (domainname, dirname)
- const char *domainname;
- const char *dirname;
-{
-#if HAVE_SETENV || HAVE_PUTENV
- char *old_val, *new_val, *cp;
- size_t new_val_len;
-
- /* This does not make much sense here but to be compatible do it. */
- if (domainname == NULL)
- return NULL;
-
- /* Compute length of added path element. If we use setenv we don't need
- the first byts for NLSPATH=, but why complicate the code for this
- peanuts. */
- new_val_len = sizeof ("NLSPATH=") - 1 + strlen (dirname)
- + sizeof ("/%L/LC_MESSAGES/%N.cat");
-
- old_val = getenv ("NLSPATH");
- if (old_val == NULL || old_val[0] == '\0')
- {
- old_val = NULL;
- new_val_len += 1 + sizeof (LOCALEDIR) - 1
- + sizeof ("/%L/LC_MESSAGES/%N.cat");
- }
- else
- new_val_len += strlen (old_val);
-
- new_val = (char *) malloc (new_val_len);
- if (new_val == NULL)
- return NULL;
-
-# if HAVE_SETENV
- cp = new_val;
-# else
- cp = stpcpy (new_val, "NLSPATH=");
-# endif
-
- cp = stpcpy (cp, dirname);
- cp = stpcpy (cp, "/%L/LC_MESSAGES/%N.cat:");
-
- if (old_val == NULL)
- {
-# if __STDC__
- stpcpy (cp, LOCALEDIR "/%L/LC_MESSAGES/%N.cat");
-# else
-
- cp = stpcpy (cp, LOCALEDIR);
- stpcpy (cp, "/%L/LC_MESSAGES/%N.cat");
-# endif
- }
- else
- stpcpy (cp, old_val);
-
-# if HAVE_SETENV
- setenv ("NLSPATH", new_val, 1);
- free (new_val);
-# else
- putenv (new_val);
- /* Do *not* free the environment entry we just entered. It is used
- from now on. */
-# endif
-
-#endif
-
- return (char *) domainname;
-}
-
-#undef gettext
-char *
-gettext (msg)
- const char *msg;
-{
- int msgid;
-
- if (msg == NULL || catalog == (nl_catd) -1)
- return (char *) msg;
-
- /* Get the message from the catalog. We always use set number 1.
- The message ID is computed by the function `msg_to_cat_id'
- which works on the table generated by `po-to-tbl'. */
- msgid = msg_to_cat_id (msg);
- if (msgid == -1)
- return (char *) msg;
-
- return catgets (catalog, 1, msgid, (char *) msg);
-}
-
-/* Look through the table `_msg_tbl' which has `_msg_tbl_length' entries
- for the one equal to msg. If it is found return the ID. In case when
- the string is not found return -1. */
-static int
-msg_to_cat_id (msg)
- const char *msg;
-{
- int cnt;
-
- for (cnt = 0; cnt < _msg_tbl_length; ++cnt)
- if (strcmp (msg, _msg_tbl[cnt]._msg) == 0)
- return _msg_tbl[cnt]._msg_number;
-
- return -1;
-}
-
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library. So we
- avoid the non-standard function stpcpy. In GNU C Library this
- function is available, though. Also allow the symbol HAVE_STPCPY
- to be defined. */
-#if !_LIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
- char *dest;
- const char *src;
-{
- while ((*dest++ = *src++) != '\0')
- /* Do nothing. */ ;
- return dest - 1;
-}
-#endif
--- /dev/null
+#! /bin/sh
+# Output a system dependent table of character encoding aliases.
+#
+# Copyright (C) 2000-2003 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Library General Public License for more details.
+#
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+# USA.
+#
+# The table consists of lines of the form
+# ALIAS CANONICAL
+#
+# ALIAS is the (system dependent) result of "nl_langinfo (CODESET)".
+# ALIAS is compared in a case sensitive way.
+#
+# CANONICAL is the GNU canonical name for this character encoding.
+# It must be an encoding supported by libiconv. Support by GNU libc is
+# also desirable. CANONICAL is case insensitive. Usually an upper case
+# MIME charset name is preferred.
+# The current list of GNU canonical charset names is as follows.
+#
+# name used by which systems a MIME name?
+# ASCII, ANSI_X3.4-1968 glibc solaris freebsd
+# ISO-8859-1 glibc aix hpux irix osf solaris freebsd yes
+# ISO-8859-2 glibc aix hpux irix osf solaris freebsd yes
+# ISO-8859-3 glibc solaris yes
+# ISO-8859-4 osf solaris freebsd yes
+# ISO-8859-5 glibc aix hpux irix osf solaris freebsd yes
+# ISO-8859-6 glibc aix hpux solaris yes
+# ISO-8859-7 glibc aix hpux irix osf solaris yes
+# ISO-8859-8 glibc aix hpux osf solaris yes
+# ISO-8859-9 glibc aix hpux irix osf solaris yes
+# ISO-8859-13 glibc
+# ISO-8859-14 glibc
+# ISO-8859-15 glibc aix osf solaris freebsd
+# KOI8-R glibc solaris freebsd yes
+# KOI8-U glibc freebsd yes
+# KOI8-T glibc
+# CP437 dos
+# CP775 dos
+# CP850 aix osf dos
+# CP852 dos
+# CP855 dos
+# CP856 aix
+# CP857 dos
+# CP861 dos
+# CP862 dos
+# CP864 dos
+# CP865 dos
+# CP866 freebsd dos
+# CP869 dos
+# CP874 woe32 dos
+# CP922 aix
+# CP932 aix woe32 dos
+# CP943 aix
+# CP949 osf woe32 dos
+# CP950 woe32 dos
+# CP1046 aix
+# CP1124 aix
+# CP1125 dos
+# CP1129 aix
+# CP1250 woe32
+# CP1251 glibc solaris woe32
+# CP1252 aix woe32
+# CP1253 woe32
+# CP1254 woe32
+# CP1255 glibc woe32
+# CP1256 woe32
+# CP1257 woe32
+# GB2312 glibc aix hpux irix solaris freebsd yes
+# EUC-JP glibc aix hpux irix osf solaris freebsd yes
+# EUC-KR glibc aix hpux irix osf solaris freebsd yes
+# EUC-TW glibc aix hpux irix osf solaris
+# BIG5 glibc aix hpux osf solaris freebsd yes
+# BIG5-HKSCS glibc solaris
+# GBK glibc aix osf solaris woe32 dos
+# GB18030 glibc solaris
+# SHIFT_JIS hpux osf solaris freebsd yes
+# JOHAB glibc solaris woe32
+# TIS-620 glibc aix hpux osf solaris
+# VISCII glibc yes
+# TCVN5712-1 glibc
+# GEORGIAN-PS glibc
+# HP-ROMAN8 hpux
+# HP-ARABIC8 hpux
+# HP-GREEK8 hpux
+# HP-HEBREW8 hpux
+# HP-TURKISH8 hpux
+# HP-KANA8 hpux
+# DEC-KANJI osf
+# DEC-HANYU osf
+# UTF-8 glibc aix hpux osf solaris yes
+#
+# Note: Names which are not marked as being a MIME name should not be used in
+# Internet protocols for information interchange (mail, news, etc.).
+#
+# Note: ASCII and ANSI_X3.4-1968 are synonymous canonical names. Applications
+# must understand both names and treat them as equivalent.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+
+host="$1"
+os=`echo "$host" | sed -e 's/^[^-]*-[^-]*-\(.*\)$/\1/'`
+echo "# This file contains a table of character encoding aliases,"
+echo "# suitable for operating system '${os}'."
+echo "# It was automatically generated from config.charset."
+# List of references, updated during installation:
+echo "# Packages using this file: "
+case "$os" in
+ linux* | *-gnu*)
+ # With glibc-2.1 or newer, we don't need any canonicalization,
+ # because glibc has iconv and both glibc and libiconv support all
+ # GNU canonical names directly. Therefore, the Makefile does not
+ # need to install the alias file at all.
+ # The following applies only to glibc-2.0.x and older libcs.
+ echo "ISO_646.IRV:1983 ASCII"
+ ;;
+ aix*)
+ echo "ISO8859-1 ISO-8859-1"
+ echo "ISO8859-2 ISO-8859-2"
+ echo "ISO8859-5 ISO-8859-5"
+ echo "ISO8859-6 ISO-8859-6"
+ echo "ISO8859-7 ISO-8859-7"
+ echo "ISO8859-8 ISO-8859-8"
+ echo "ISO8859-9 ISO-8859-9"
+ echo "ISO8859-15 ISO-8859-15"
+ echo "IBM-850 CP850"
+ echo "IBM-856 CP856"
+ echo "IBM-921 ISO-8859-13"
+ echo "IBM-922 CP922"
+ echo "IBM-932 CP932"
+ echo "IBM-943 CP943"
+ echo "IBM-1046 CP1046"
+ echo "IBM-1124 CP1124"
+ echo "IBM-1129 CP1129"
+ echo "IBM-1252 CP1252"
+ echo "IBM-eucCN GB2312"
+ echo "IBM-eucJP EUC-JP"
+ echo "IBM-eucKR EUC-KR"
+ echo "IBM-eucTW EUC-TW"
+ echo "big5 BIG5"
+ echo "GBK GBK"
+ echo "TIS-620 TIS-620"
+ echo "UTF-8 UTF-8"
+ ;;
+ hpux*)
+ echo "iso88591 ISO-8859-1"
+ echo "iso88592 ISO-8859-2"
+ echo "iso88595 ISO-8859-5"
+ echo "iso88596 ISO-8859-6"
+ echo "iso88597 ISO-8859-7"
+ echo "iso88598 ISO-8859-8"
+ echo "iso88599 ISO-8859-9"
+ echo "iso885915 ISO-8859-15"
+ echo "roman8 HP-ROMAN8"
+ echo "arabic8 HP-ARABIC8"
+ echo "greek8 HP-GREEK8"
+ echo "hebrew8 HP-HEBREW8"
+ echo "turkish8 HP-TURKISH8"
+ echo "kana8 HP-KANA8"
+ echo "tis620 TIS-620"
+ echo "big5 BIG5"
+ echo "eucJP EUC-JP"
+ echo "eucKR EUC-KR"
+ echo "eucTW EUC-TW"
+ echo "hp15CN GB2312"
+ #echo "ccdc ?" # what is this?
+ echo "SJIS SHIFT_JIS"
+ echo "utf8 UTF-8"
+ ;;
+ irix*)
+ echo "ISO8859-1 ISO-8859-1"
+ echo "ISO8859-2 ISO-8859-2"
+ echo "ISO8859-5 ISO-8859-5"
+ echo "ISO8859-7 ISO-8859-7"
+ echo "ISO8859-9 ISO-8859-9"
+ echo "eucCN GB2312"
+ echo "eucJP EUC-JP"
+ echo "eucKR EUC-KR"
+ echo "eucTW EUC-TW"
+ ;;
+ osf*)
+ echo "ISO8859-1 ISO-8859-1"
+ echo "ISO8859-2 ISO-8859-2"
+ echo "ISO8859-4 ISO-8859-4"
+ echo "ISO8859-5 ISO-8859-5"
+ echo "ISO8859-7 ISO-8859-7"
+ echo "ISO8859-8 ISO-8859-8"
+ echo "ISO8859-9 ISO-8859-9"
+ echo "ISO8859-15 ISO-8859-15"
+ echo "cp850 CP850"
+ echo "big5 BIG5"
+ echo "dechanyu DEC-HANYU"
+ echo "dechanzi GB2312"
+ echo "deckanji DEC-KANJI"
+ echo "deckorean EUC-KR"
+ echo "eucJP EUC-JP"
+ echo "eucKR EUC-KR"
+ echo "eucTW EUC-TW"
+ echo "GBK GBK"
+ echo "KSC5601 CP949"
+ echo "sdeckanji EUC-JP"
+ echo "SJIS SHIFT_JIS"
+ echo "TACTIS TIS-620"
+ echo "UTF-8 UTF-8"
+ ;;
+ solaris*)
+ echo "646 ASCII"
+ echo "ISO8859-1 ISO-8859-1"
+ echo "ISO8859-2 ISO-8859-2"
+ echo "ISO8859-3 ISO-8859-3"
+ echo "ISO8859-4 ISO-8859-4"
+ echo "ISO8859-5 ISO-8859-5"
+ echo "ISO8859-6 ISO-8859-6"
+ echo "ISO8859-7 ISO-8859-7"
+ echo "ISO8859-8 ISO-8859-8"
+ echo "ISO8859-9 ISO-8859-9"
+ echo "ISO8859-15 ISO-8859-15"
+ echo "koi8-r KOI8-R"
+ echo "ansi-1251 CP1251"
+ echo "BIG5 BIG5"
+ echo "Big5-HKSCS BIG5-HKSCS"
+ echo "gb2312 GB2312"
+ echo "GBK GBK"
+ echo "GB18030 GB18030"
+ echo "cns11643 EUC-TW"
+ echo "5601 EUC-KR"
+ echo "ko_KR.johap92 JOHAB"
+ echo "eucJP EUC-JP"
+ echo "PCK SHIFT_JIS"
+ echo "TIS620.2533 TIS-620"
+ #echo "sun_eu_greek ?" # what is this?
+ echo "UTF-8 UTF-8"
+ ;;
+ freebsd* | os2*)
+ # FreeBSD 4.2 doesn't have nl_langinfo(CODESET); therefore
+ # localcharset.c falls back to using the full locale name
+ # from the environment variables.
+ # Likewise for OS/2. OS/2 has XFree86 just like FreeBSD. Just
+ # reuse FreeBSD's locale data for OS/2.
+ echo "C ASCII"
+ echo "US-ASCII ASCII"
+ for l in la_LN lt_LN; do
+ echo "$l.ASCII ASCII"
+ done
+ for l in da_DK de_AT de_CH de_DE en_AU en_CA en_GB en_US es_ES \
+ fi_FI fr_BE fr_CA fr_CH fr_FR is_IS it_CH it_IT la_LN \
+ lt_LN nl_BE nl_NL no_NO pt_PT sv_SE; do
+ echo "$l.ISO_8859-1 ISO-8859-1"
+ echo "$l.DIS_8859-15 ISO-8859-15"
+ done
+ for l in cs_CZ hr_HR hu_HU la_LN lt_LN pl_PL sl_SI; do
+ echo "$l.ISO_8859-2 ISO-8859-2"
+ done
+ for l in la_LN lt_LT; do
+ echo "$l.ISO_8859-4 ISO-8859-4"
+ done
+ for l in ru_RU ru_SU; do
+ echo "$l.KOI8-R KOI8-R"
+ echo "$l.ISO_8859-5 ISO-8859-5"
+ echo "$l.CP866 CP866"
+ done
+ echo "uk_UA.KOI8-U KOI8-U"
+ echo "zh_TW.BIG5 BIG5"
+ echo "zh_TW.Big5 BIG5"
+ echo "zh_CN.EUC GB2312"
+ echo "ja_JP.EUC EUC-JP"
+ echo "ja_JP.SJIS SHIFT_JIS"
+ echo "ja_JP.Shift_JIS SHIFT_JIS"
+ echo "ko_KR.EUC EUC-KR"
+ ;;
+ netbsd*)
+ echo "646 ASCII"
+ echo "ISO8859-1 ISO-8859-1"
+ echo "ISO8859-2 ISO-8859-2"
+ echo "ISO8859-4 ISO-8859-4"
+ echo "ISO8859-5 ISO-8859-5"
+ echo "ISO8859-15 ISO-8859-15"
+ echo "eucCN GB2312"
+ echo "eucJP EUC-JP"
+ echo "eucKR EUC-KR"
+ echo "eucTW EUC-TW"
+ echo "BIG5 BIG5"
+ echo "SJIS SHIFT_JIS"
+ ;;
+ beos*)
+ # BeOS has a single locale, and it has UTF-8 encoding.
+ echo "* UTF-8"
+ ;;
+ msdosdjgpp*)
+ # DJGPP 2.03 doesn't have nl_langinfo(CODESET); therefore
+ # localcharset.c falls back to using the full locale name
+ # from the environment variables.
+ echo "#"
+ echo "# The encodings given here may not all be correct."
+ echo "# If you find that the encoding given for your language and"
+ echo "# country is not the one your DOS machine actually uses, just"
+ echo "# correct it in this file, and send a mail to"
+ echo "# Juan Manuel Guerrero <st001906@hrz1.hrz.tu-darmstadt.de>"
+ echo "# and Bruno Haible <bruno@clisp.org>."
+ echo "#"
+ echo "C ASCII"
+ # ISO-8859-1 languages
+ echo "ca CP850"
+ echo "ca_ES CP850"
+ echo "da CP865" # not CP850 ??
+ echo "da_DK CP865" # not CP850 ??
+ echo "de CP850"
+ echo "de_AT CP850"
+ echo "de_CH CP850"
+ echo "de_DE CP850"
+ echo "en CP850"
+ echo "en_AU CP850" # not CP437 ??
+ echo "en_CA CP850"
+ echo "en_GB CP850"
+ echo "en_NZ CP437"
+ echo "en_US CP437"
+ echo "en_ZA CP850" # not CP437 ??
+ echo "es CP850"
+ echo "es_AR CP850"
+ echo "es_BO CP850"
+ echo "es_CL CP850"
+ echo "es_CO CP850"
+ echo "es_CR CP850"
+ echo "es_CU CP850"
+ echo "es_DO CP850"
+ echo "es_EC CP850"
+ echo "es_ES CP850"
+ echo "es_GT CP850"
+ echo "es_HN CP850"
+ echo "es_MX CP850"
+ echo "es_NI CP850"
+ echo "es_PA CP850"
+ echo "es_PY CP850"
+ echo "es_PE CP850"
+ echo "es_SV CP850"
+ echo "es_UY CP850"
+ echo "es_VE CP850"
+ echo "et CP850"
+ echo "et_EE CP850"
+ echo "eu CP850"
+ echo "eu_ES CP850"
+ echo "fi CP850"
+ echo "fi_FI CP850"
+ echo "fr CP850"
+ echo "fr_BE CP850"
+ echo "fr_CA CP850"
+ echo "fr_CH CP850"
+ echo "fr_FR CP850"
+ echo "ga CP850"
+ echo "ga_IE CP850"
+ echo "gd CP850"
+ echo "gd_GB CP850"
+ echo "gl CP850"
+ echo "gl_ES CP850"
+ echo "id CP850" # not CP437 ??
+ echo "id_ID CP850" # not CP437 ??
+ echo "is CP861" # not CP850 ??
+ echo "is_IS CP861" # not CP850 ??
+ echo "it CP850"
+ echo "it_CH CP850"
+ echo "it_IT CP850"
+ echo "lt CP775"
+ echo "lt_LT CP775"
+ echo "lv CP775"
+ echo "lv_LV CP775"
+ echo "nb CP865" # not CP850 ??
+ echo "nb_NO CP865" # not CP850 ??
+ echo "nl CP850"
+ echo "nl_BE CP850"
+ echo "nl_NL CP850"
+ echo "nn CP865" # not CP850 ??
+ echo "nn_NO CP865" # not CP850 ??
+ echo "no CP865" # not CP850 ??
+ echo "no_NO CP865" # not CP850 ??
+ echo "pt CP850"
+ echo "pt_BR CP850"
+ echo "pt_PT CP850"
+ echo "sv CP850"
+ echo "sv_SE CP850"
+ # ISO-8859-2 languages
+ echo "cs CP852"
+ echo "cs_CZ CP852"
+ echo "hr CP852"
+ echo "hr_HR CP852"
+ echo "hu CP852"
+ echo "hu_HU CP852"
+ echo "pl CP852"
+ echo "pl_PL CP852"
+ echo "ro CP852"
+ echo "ro_RO CP852"
+ echo "sk CP852"
+ echo "sk_SK CP852"
+ echo "sl CP852"
+ echo "sl_SI CP852"
+ echo "sq CP852"
+ echo "sq_AL CP852"
+ echo "sr CP852" # CP852 or CP866 or CP855 ??
+ echo "sr_YU CP852" # CP852 or CP866 or CP855 ??
+ # ISO-8859-3 languages
+ echo "mt CP850"
+ echo "mt_MT CP850"
+ # ISO-8859-5 languages
+ echo "be CP866"
+ echo "be_BE CP866"
+ echo "bg CP866" # not CP855 ??
+ echo "bg_BG CP866" # not CP855 ??
+ echo "mk CP866" # not CP855 ??
+ echo "mk_MK CP866" # not CP855 ??
+ echo "ru CP866"
+ echo "ru_RU CP866"
+ echo "uk CP1125"
+ echo "uk_UA CP1125"
+ # ISO-8859-6 languages
+ echo "ar CP864"
+ echo "ar_AE CP864"
+ echo "ar_DZ CP864"
+ echo "ar_EG CP864"
+ echo "ar_IQ CP864"
+ echo "ar_IR CP864"
+ echo "ar_JO CP864"
+ echo "ar_KW CP864"
+ echo "ar_MA CP864"
+ echo "ar_OM CP864"
+ echo "ar_QA CP864"
+ echo "ar_SA CP864"
+ echo "ar_SY CP864"
+ # ISO-8859-7 languages
+ echo "el CP869"
+ echo "el_GR CP869"
+ # ISO-8859-8 languages
+ echo "he CP862"
+ echo "he_IL CP862"
+ # ISO-8859-9 languages
+ echo "tr CP857"
+ echo "tr_TR CP857"
+ # Japanese
+ echo "ja CP932"
+ echo "ja_JP CP932"
+ # Chinese
+ echo "zh_CN GBK"
+ echo "zh_TW CP950" # not CP938 ??
+ # Korean
+ echo "kr CP949" # not CP934 ??
+ echo "kr_KR CP949" # not CP934 ??
+ # Thai
+ echo "th CP874"
+ echo "th_TH CP874"
+ # Other
+ echo "eo CP850"
+ echo "eo_EO CP850"
+ ;;
+esac
-/* Implementation of the dcgettext(3) function
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+/* Implementation of the dcgettext(3) function.
+ Copyright (C) 1995-1999, 2000, 2001, 2002 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
-#include <sys/types.h>
-
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-# define HAVE_ALLOCA 1
-#else
-# if defined HAVE_ALLOCA_H || defined _LIBC
-# include <alloca.h>
-# else
-# ifdef _AIX
- #pragma alloca
-# else
-# ifndef alloca
-char *alloca ();
-# endif
-# endif
-# endif
-#endif
-
-#include <errno.h>
-#ifndef errno
-extern int errno;
-#endif
-#ifndef __set_errno
-# define __set_errno(val) errno = (val)
-#endif
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-# include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-# define _GNU_SOURCE 1
-# endif
-# include <string.h>
-#else
-# include <strings.h>
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-# define strchr index
-# endif
-#endif
-
-#if defined HAVE_UNISTD_H || defined _LIBC
-# include <unistd.h>
-#endif
-
-#include "gettext.h"
#include "gettextP.h"
#ifdef _LIBC
# include <libintl.h>
#else
-# include "libgettext.h"
+# include "libgnuintl.h"
#endif
-#include "hash-string.h"
/* @@ end of prolog @@ */
-#ifdef _LIBC
-/* Rename the non ANSI C functions. This is required by the standard
- because some ANSI C functions will require linking with this object
- file and the name space must not be polluted. */
-# define getcwd __getcwd
-# define stpcpy __stpcpy
-#else
-# if !defined HAVE_GETCWD
-char *getwd ();
-# define getcwd(buf, max) getwd (buf)
-# else
-char *getcwd ();
-# endif
-# ifndef HAVE_STPCPY
-static char *stpcpy PARAMS ((char *dest, const char *src));
-# endif
-#endif
-
-/* Amount to increase buffer size by in each try. */
-#define PATH_INCR 32
-
-/* The following is from pathmax.h. */
-/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
- PATH_MAX but might cause redefinition warnings when sys/param.h is
- later included (as on MORE/BSD 4.3). */
-#if defined(_POSIX_VERSION) || (defined(HAVE_LIMITS_H) && !defined(__GNUC__))
-# include <limits.h>
-#endif
-
-#ifndef _POSIX_PATH_MAX
-# define _POSIX_PATH_MAX 255
-#endif
-
-#if !defined(PATH_MAX) && defined(_PC_PATH_MAX)
-# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
-#endif
-
-/* Don't include sys/param.h if it already has been. */
-#if defined(HAVE_SYS_PARAM_H) && !defined(PATH_MAX) && !defined(MAXPATHLEN)
-# include <sys/param.h>
-#endif
-
-#if !defined(PATH_MAX) && defined(MAXPATHLEN)
-# define PATH_MAX MAXPATHLEN
-#endif
-
-#ifndef PATH_MAX
-# define PATH_MAX _POSIX_PATH_MAX
-#endif
-
-/* XPG3 defines the result of `setlocale (category, NULL)' as:
- ``Directs `setlocale()' to query `category' and return the current
- setting of `local'.''
- However it does not specify the exact format. And even worse: POSIX
- defines this not at all. So we can use this feature only on selected
- system (e.g. those using GNU C Library). */
-#ifdef _LIBC
-# define HAVE_LOCALE_NULL
-#endif
-
-/* Name of the default domain used for gettext(3) prior any call to
- textdomain(3). The default value for this is "messages". */
-const char _nl_default_default_domain[] = "messages";
-
-/* Value used as the default domain for gettext(3). */
-const char *_nl_current_default_domain = _nl_default_default_domain;
-
-/* Contains the default location of the message catalogs. */
-const char _nl_default_dirname[] = GNULOCALEDIR;
-
-/* List with bindings of specific domains created by bindtextdomain()
- calls. */
-struct binding *_nl_domain_bindings;
-
-/* Prototypes for local functions. */
-static char *find_msg PARAMS ((struct loaded_l10nfile *domain_file,
- const char *msgid));
-static const char *category_to_name PARAMS ((int category));
-static const char *guess_category_value PARAMS ((int category,
- const char *categoryname));
-
-
-/* For those loosing systems which don't have `alloca' we have to add
- some additional code emulating it. */
-#ifdef HAVE_ALLOCA
-/* Nothing has to be done. */
-# define ADD_BLOCK(list, address) /* nothing */
-# define FREE_BLOCKS(list) /* nothing */
-#else
-struct block_list
-{
- void *address;
- struct block_list *next;
-};
-# define ADD_BLOCK(list, addr) \
- do { \
- struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \
- /* If we cannot get a free block we cannot add the new element to \
- the list. */ \
- if (newp != NULL) { \
- newp->address = (addr); \
- newp->next = (list); \
- (list) = newp; \
- } \
- } while (0)
-# define FREE_BLOCKS(list) \
- do { \
- while (list != NULL) { \
- struct block_list *old = list; \
- list = list->next; \
- free (old); \
- } \
- } while (0)
-# undef alloca
-# define alloca(size) (malloc (size))
-#endif /* have alloca */
-
-
/* Names for the libintl functions are a problem. They must not clash
with existing names and they should follow ANSI C. But this source
code is also used in GNU C Library where the names have a __
prefix. So we have to make a difference here. */
#ifdef _LIBC
# define DCGETTEXT __dcgettext
+# define DCIGETTEXT __dcigettext
#else
-# define DCGETTEXT dcgettext__
+# define DCGETTEXT libintl_dcgettext
+# define DCIGETTEXT libintl_dcigettext
#endif
/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
const char *msgid;
int category;
{
-#ifndef HAVE_ALLOCA
- struct block_list *block_list = NULL;
-#endif
- struct loaded_l10nfile *domain;
- struct binding *binding;
- const char *categoryname;
- const char *categoryvalue;
- char *dirname, *xdomainname;
- char *single_locale;
- char *retval;
- int saved_errno = errno;
-
- /* If no real MSGID is given return NULL. */
- if (msgid == NULL)
- return NULL;
-
- /* If DOMAINNAME is NULL, we are interested in the default domain. If
- CATEGORY is not LC_MESSAGES this might not make much sense but the
- defintion left this undefined. */
- if (domainname == NULL)
- domainname = _nl_current_default_domain;
-
- /* First find matching binding. */
- for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
- {
- int compare = strcmp (domainname, binding->domainname);
- if (compare == 0)
- /* We found it! */
- break;
- if (compare < 0)
- {
- /* It is not in the list. */
- binding = NULL;
- break;
- }
- }
-
- if (binding == NULL)
- dirname = (char *) _nl_default_dirname;
- else if (binding->dirname[0] == '/')
- dirname = binding->dirname;
- else
- {
- /* We have a relative path. Make it absolute now. */
- size_t dirname_len = strlen (binding->dirname) + 1;
- size_t path_max;
- char *ret;
-
- path_max = (unsigned) PATH_MAX;
- path_max += 2; /* The getcwd docs say to do this. */
-
- dirname = (char *) alloca (path_max + dirname_len);
- ADD_BLOCK (block_list, dirname);
-
- __set_errno (0);
- while ((ret = getcwd (dirname, path_max)) == NULL && errno == ERANGE)
- {
- path_max += PATH_INCR;
- dirname = (char *) alloca (path_max + dirname_len);
- ADD_BLOCK (block_list, dirname);
- __set_errno (0);
- }
-
- if (ret == NULL)
- {
- /* We cannot get the current working directory. Don't signal an
- error but simply return the default string. */
- FREE_BLOCKS (block_list);
- __set_errno (saved_errno);
- return (char *) msgid;
- }
-
- stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
- }
-
- /* Now determine the symbolic name of CATEGORY and its value. */
- categoryname = category_to_name (category);
- categoryvalue = guess_category_value (category, categoryname);
-
- xdomainname = (char *) alloca (strlen (categoryname)
- + strlen (domainname) + 5);
- ADD_BLOCK (block_list, xdomainname);
-
- stpcpy (stpcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
- domainname),
- ".mo");
-
- /* Creating working area. */
- single_locale = (char *) alloca (strlen (categoryvalue) + 1);
- ADD_BLOCK (block_list, single_locale);
-
-
- /* Search for the given string. This is a loop because we perhaps
- got an ordered list of languages to consider for th translation. */
- while (1)
- {
- /* Make CATEGORYVALUE point to the next element of the list. */
- while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
- ++categoryvalue;
- if (categoryvalue[0] == '\0')
- {
- /* The whole contents of CATEGORYVALUE has been searched but
- no valid entry has been found. We solve this situation
- by implicitly appending a "C" entry, i.e. no translation
- will take place. */
- single_locale[0] = 'C';
- single_locale[1] = '\0';
- }
- else
- {
- char *cp = single_locale;
- while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
- *cp++ = *categoryvalue++;
- *cp = '\0';
- }
-
- /* If the current locale value is C (or POSIX) we don't load a
- domain. Return the MSGID. */
- if (strcmp (single_locale, "C") == 0
- || strcmp (single_locale, "POSIX") == 0)
- {
- FREE_BLOCKS (block_list);
- __set_errno (saved_errno);
- return (char *) msgid;
- }
-
-
- /* Find structure describing the message catalog matching the
- DOMAINNAME and CATEGORY. */
- domain = _nl_find_domain (dirname, single_locale, xdomainname);
-
- if (domain != NULL)
- {
- retval = find_msg (domain, msgid);
-
- if (retval == NULL)
- {
- int cnt;
-
- for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
- {
- retval = find_msg (domain->successor[cnt], msgid);
-
- if (retval != NULL)
- break;
- }
- }
-
- if (retval != NULL)
- {
- FREE_BLOCKS (block_list);
- __set_errno (saved_errno);
- return retval;
- }
- }
- }
- /* NOTREACHED */
+ return DCIGETTEXT (domainname, msgid, NULL, 0, 0, category);
}
#ifdef _LIBC
/* Alias for function name in GNU C Library. */
+INTDEF(__dcgettext)
weak_alias (__dcgettext, dcgettext);
#endif
-
-
-static char *
-find_msg (domain_file, msgid)
- struct loaded_l10nfile *domain_file;
- const char *msgid;
-{
- size_t top, act, bottom;
- struct loaded_domain *domain;
-
- if (domain_file->decided == 0)
- _nl_load_domain (domain_file);
-
- if (domain_file->data == NULL)
- return NULL;
-
- domain = (struct loaded_domain *) domain_file->data;
-
- /* Locate the MSGID and its translation. */
- if (domain->hash_size > 2 && domain->hash_tab != NULL)
- {
- /* Use the hashing table. */
- nls_uint32 len = strlen (msgid);
- nls_uint32 hash_val = hash_string (msgid);
- nls_uint32 idx = hash_val % domain->hash_size;
- nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
- nls_uint32 nstr = W (domain->must_swap, domain->hash_tab[idx]);
-
- if (nstr == 0)
- /* Hash table entry is empty. */
- return NULL;
-
- if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
- && strcmp (msgid,
- domain->data + W (domain->must_swap,
- domain->orig_tab[nstr - 1].offset)) == 0)
- return (char *) domain->data + W (domain->must_swap,
- domain->trans_tab[nstr - 1].offset);
-
- while (1)
- {
- if (idx >= domain->hash_size - incr)
- idx -= domain->hash_size - incr;
- else
- idx += incr;
-
- nstr = W (domain->must_swap, domain->hash_tab[idx]);
- if (nstr == 0)
- /* Hash table entry is empty. */
- return NULL;
-
- if (W (domain->must_swap, domain->orig_tab[nstr - 1].length) == len
- && strcmp (msgid,
- domain->data + W (domain->must_swap,
- domain->orig_tab[nstr - 1].offset))
- == 0)
- return (char *) domain->data
- + W (domain->must_swap, domain->trans_tab[nstr - 1].offset);
- }
- /* NOTREACHED */
- }
-
- /* Now we try the default method: binary search in the sorted
- array of messages. */
- bottom = 0;
- top = domain->nstrings;
- while (bottom < top)
- {
- int cmp_val;
-
- act = (bottom + top) / 2;
- cmp_val = strcmp (msgid, domain->data
- + W (domain->must_swap,
- domain->orig_tab[act].offset));
- if (cmp_val < 0)
- top = act;
- else if (cmp_val > 0)
- bottom = act + 1;
- else
- break;
- }
-
- /* If an translation is found return this. */
- return bottom >= top ? NULL : (char *) domain->data
- + W (domain->must_swap,
- domain->trans_tab[act].offset);
-}
-
-
-/* Return string representation of locale CATEGORY. */
-static const char *
-category_to_name (category)
- int category;
-{
- const char *retval;
-
- switch (category)
- {
-#ifdef LC_COLLATE
- case LC_COLLATE:
- retval = "LC_COLLATE";
- break;
-#endif
-#ifdef LC_CTYPE
- case LC_CTYPE:
- retval = "LC_CTYPE";
- break;
-#endif
-#ifdef LC_MONETARY
- case LC_MONETARY:
- retval = "LC_MONETARY";
- break;
-#endif
-#ifdef LC_NUMERIC
- case LC_NUMERIC:
- retval = "LC_NUMERIC";
- break;
-#endif
-#ifdef LC_TIME
- case LC_TIME:
- retval = "LC_TIME";
- break;
-#endif
-#ifdef LC_MESSAGES
- case LC_MESSAGES:
- retval = "LC_MESSAGES";
- break;
-#endif
-#ifdef LC_RESPONSE
- case LC_RESPONSE:
- retval = "LC_RESPONSE";
- break;
-#endif
-#ifdef LC_ALL
- case LC_ALL:
- /* This might not make sense but is perhaps better than any other
- value. */
- retval = "LC_ALL";
- break;
-#endif
- default:
- /* If you have a better idea for a default value let me know. */
- retval = "LC_XXX";
- }
-
- return retval;
-}
-
-/* Guess value of current locale from value of the environment variables. */
-static const char *
-guess_category_value (category, categoryname)
- int category;
- const char *categoryname;
-{
- const char *retval;
-
- /* The highest priority value is the `LANGUAGE' environment
- variable. This is a GNU extension. */
- retval = getenv ("LANGUAGE");
- if (retval != NULL && retval[0] != '\0')
- return retval;
-
- /* `LANGUAGE' is not set. So we have to proceed with the POSIX
- methods of looking to `LC_ALL', `LC_xxx', and `LANG'. On some
- systems this can be done by the `setlocale' function itself. */
-#if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL
- return setlocale (category, NULL);
-#else
- /* Setting of LC_ALL overwrites all other. */
- retval = getenv ("LC_ALL");
- if (retval != NULL && retval[0] != '\0')
- return retval;
-
- /* Next comes the name of the desired category. */
- retval = getenv (categoryname);
- if (retval != NULL && retval[0] != '\0')
- return retval;
-
- /* Last possibility is the LANG environment variable. */
- retval = getenv ("LANG");
- if (retval != NULL && retval[0] != '\0')
- return retval;
-
- /* We use C as the default domain. POSIX says this is implementation
- defined. */
- return "C";
-#endif
-}
-
-/* @@ begin of epilog @@ */
-
-/* We don't want libintl.a to depend on any other library. So we
- avoid the non-standard function stpcpy. In GNU C Library this
- function is available, though. Also allow the symbol HAVE_STPCPY
- to be defined. */
-#if !_LIBC && !HAVE_STPCPY
-static char *
-stpcpy (dest, src)
- char *dest;
- const char *src;
-{
- while ((*dest++ = *src++) != '\0')
- /* Do nothing. */ ;
- return dest - 1;
-}
-#endif
--- /dev/null
+/* Implementation of the internal dcigettext function.
+ Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
+ This must come before <config.h> because <config.h> may include
+ <features.h>, and once <features.h> has been included, it's too late. */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE 1
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <sys/types.h>
+
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+# define HAVE_ALLOCA 1
+#else
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
+# else
+# if defined HAVE_ALLOCA_H || defined _LIBC
+# include <alloca.h>
+# else
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca
+char *alloca ();
+# endif
+# endif
+# endif
+# endif
+#endif
+
+#include <errno.h>
+#ifndef errno
+extern int errno;
+#endif
+#ifndef __set_errno
+# define __set_errno(val) errno = (val)
+#endif
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+
+#if defined HAVE_UNISTD_H || defined _LIBC
+# include <unistd.h>
+#endif
+
+#include <locale.h>
+
+#ifdef _LIBC
+ /* Guess whether integer division by zero raises signal SIGFPE.
+ Set to 1 only if you know for sure. In case of doubt, set to 0. */
+# if defined __alpha__ || defined __arm__ || defined __i386__ \
+ || defined __m68k__ || defined __s390__
+# define INTDIV0_RAISES_SIGFPE 1
+# else
+# define INTDIV0_RAISES_SIGFPE 0
+# endif
+#endif
+#if !INTDIV0_RAISES_SIGFPE
+# include <signal.h>
+#endif
+
+#if defined HAVE_SYS_PARAM_H || defined _LIBC
+# include <sys/param.h>
+#endif
+
+#include "gettextP.h"
+#include "plural-exp.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+#include "hash-string.h"
+
+/* Thread safetyness. */
+#ifdef _LIBC
+# include <bits/libc-lock.h>
+#else
+/* Provide dummy implementation if this is outside glibc. */
+# define __libc_lock_define_initialized(CLASS, NAME)
+# define __libc_lock_lock(NAME)
+# define __libc_lock_unlock(NAME)
+# define __libc_rwlock_define_initialized(CLASS, NAME)
+# define __libc_rwlock_rdlock(NAME)
+# define __libc_rwlock_unlock(NAME)
+#endif
+
+/* Alignment of types. */
+#if defined __GNUC__ && __GNUC__ >= 2
+# define alignof(TYPE) __alignof__ (TYPE)
+#else
+# define alignof(TYPE) \
+ ((int) &((struct { char dummy1; TYPE dummy2; } *) 0)->dummy2)
+#endif
+
+/* The internal variables in the standalone libintl.a must have different
+ names than the internal variables in GNU libc, otherwise programs
+ using libintl.a cannot be linked statically. */
+#if !defined _LIBC
+# define _nl_default_default_domain libintl_nl_default_default_domain
+# define _nl_current_default_domain libintl_nl_current_default_domain
+# define _nl_default_dirname libintl_nl_default_dirname
+# define _nl_domain_bindings libintl_nl_domain_bindings
+#endif
+
+/* Some compilers, like SunOS4 cc, don't have offsetof in <stddef.h>. */
+#ifndef offsetof
+# define offsetof(type,ident) ((size_t)&(((type*)0)->ident))
+#endif
+
+/* @@ end of prolog @@ */
+
+#ifdef _LIBC
+/* Rename the non ANSI C functions. This is required by the standard
+ because some ANSI C functions will require linking with this object
+ file and the name space must not be polluted. */
+# define getcwd __getcwd
+# ifndef stpcpy
+# define stpcpy __stpcpy
+# endif
+# define tfind __tfind
+#else
+# if !defined HAVE_GETCWD
+char *getwd ();
+# define getcwd(buf, max) getwd (buf)
+# else
+char *getcwd ();
+# endif
+# ifndef HAVE_STPCPY
+static char *stpcpy PARAMS ((char *dest, const char *src));
+# endif
+# ifndef HAVE_MEMPCPY
+static void *mempcpy PARAMS ((void *dest, const void *src, size_t n));
+# endif
+#endif
+
+/* Amount to increase buffer size by in each try. */
+#define PATH_INCR 32
+
+/* The following is from pathmax.h. */
+/* Non-POSIX BSD systems might have gcc's limits.h, which doesn't define
+ PATH_MAX but might cause redefinition warnings when sys/param.h is
+ later included (as on MORE/BSD 4.3). */
+#if defined _POSIX_VERSION || (defined HAVE_LIMITS_H && !defined __GNUC__)
+# include <limits.h>
+#endif
+
+#ifndef _POSIX_PATH_MAX
+# define _POSIX_PATH_MAX 255
+#endif
+
+#if !defined PATH_MAX && defined _PC_PATH_MAX
+# define PATH_MAX (pathconf ("/", _PC_PATH_MAX) < 1 ? 1024 : pathconf ("/", _PC_PATH_MAX))
+#endif
+
+/* Don't include sys/param.h if it already has been. */
+#if defined HAVE_SYS_PARAM_H && !defined PATH_MAX && !defined MAXPATHLEN
+# include <sys/param.h>
+#endif
+
+#if !defined PATH_MAX && defined MAXPATHLEN
+# define PATH_MAX MAXPATHLEN
+#endif
+
+#ifndef PATH_MAX
+# define PATH_MAX _POSIX_PATH_MAX
+#endif
+
+/* Pathname support.
+ ISSLASH(C) tests whether C is a directory separator character.
+ IS_ABSOLUTE_PATH(P) tests whether P is an absolute path. If it is not,
+ it may be concatenated to a directory pathname.
+ IS_PATH_WITH_DIR(P) tests whether P contains a directory specification.
+ */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+ /* Win32, OS/2, DOS */
+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
+# define HAS_DEVICE(P) \
+ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
+ && (P)[1] == ':')
+# define IS_ABSOLUTE_PATH(P) (ISSLASH ((P)[0]) || HAS_DEVICE (P))
+# define IS_PATH_WITH_DIR(P) \
+ (strchr (P, '/') != NULL || strchr (P, '\\') != NULL || HAS_DEVICE (P))
+#else
+ /* Unix */
+# define ISSLASH(C) ((C) == '/')
+# define IS_ABSOLUTE_PATH(P) ISSLASH ((P)[0])
+# define IS_PATH_WITH_DIR(P) (strchr (P, '/') != NULL)
+#endif
+
+/* This is the type used for the search tree where known translations
+ are stored. */
+struct known_translation_t
+{
+ /* Domain in which to search. */
+ char *domainname;
+
+ /* The category. */
+ int category;
+
+ /* State of the catalog counter at the point the string was found. */
+ int counter;
+
+ /* Catalog where the string was found. */
+ struct loaded_l10nfile *domain;
+
+ /* And finally the translation. */
+ const char *translation;
+ size_t translation_length;
+
+ /* Pointer to the string in question. */
+ char msgid[ZERO];
+};
+
+/* Root of the search tree with known translations. We can use this
+ only if the system provides the `tsearch' function family. */
+#if defined HAVE_TSEARCH || defined _LIBC
+# include <search.h>
+
+static void *root;
+
+# ifdef _LIBC
+# define tsearch __tsearch
+# endif
+
+/* Function to compare two entries in the table of known translations. */
+static int transcmp PARAMS ((const void *p1, const void *p2));
+static int
+transcmp (p1, p2)
+ const void *p1;
+ const void *p2;
+{
+ const struct known_translation_t *s1;
+ const struct known_translation_t *s2;
+ int result;
+
+ s1 = (const struct known_translation_t *) p1;
+ s2 = (const struct known_translation_t *) p2;
+
+ result = strcmp (s1->msgid, s2->msgid);
+ if (result == 0)
+ {
+ result = strcmp (s1->domainname, s2->domainname);
+ if (result == 0)
+ /* We compare the category last (though this is the cheapest
+ operation) since it is hopefully always the same (namely
+ LC_MESSAGES). */
+ result = s1->category - s2->category;
+ }
+
+ return result;
+}
+#endif
+
+#ifndef INTVARDEF
+# define INTVARDEF(name)
+#endif
+#ifndef INTUSE
+# define INTUSE(name) name
+#endif
+
+/* Name of the default domain used for gettext(3) prior any call to
+ textdomain(3). The default value for this is "messages". */
+const char _nl_default_default_domain[] attribute_hidden = "messages";
+
+/* Value used as the default domain for gettext(3). */
+const char *_nl_current_default_domain attribute_hidden
+ = _nl_default_default_domain;
+
+/* Contains the default location of the message catalogs. */
+#if defined __EMX__
+extern const char _nl_default_dirname[];
+#else
+const char _nl_default_dirname[] = LOCALEDIR;
+INTVARDEF (_nl_default_dirname)
+#endif
+
+/* List with bindings of specific domains created by bindtextdomain()
+ calls. */
+struct binding *_nl_domain_bindings;
+
+/* Prototypes for local functions. */
+static char *plural_lookup PARAMS ((struct loaded_l10nfile *domain,
+ unsigned long int n,
+ const char *translation,
+ size_t translation_len))
+ internal_function;
+static const char *guess_category_value PARAMS ((int category,
+ const char *categoryname))
+ internal_function;
+#ifdef _LIBC
+# include "../locale/localeinfo.h"
+# define category_to_name(category) _nl_category_names[category]
+#else
+static const char *category_to_name PARAMS ((int category)) internal_function;
+#endif
+
+
+/* For those loosing systems which don't have `alloca' we have to add
+ some additional code emulating it. */
+#ifdef HAVE_ALLOCA
+/* Nothing has to be done. */
+# define freea(p) /* nothing */
+# define ADD_BLOCK(list, address) /* nothing */
+# define FREE_BLOCKS(list) /* nothing */
+#else
+struct block_list
+{
+ void *address;
+ struct block_list *next;
+};
+# define ADD_BLOCK(list, addr) \
+ do { \
+ struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \
+ /* If we cannot get a free block we cannot add the new element to \
+ the list. */ \
+ if (newp != NULL) { \
+ newp->address = (addr); \
+ newp->next = (list); \
+ (list) = newp; \
+ } \
+ } while (0)
+# define FREE_BLOCKS(list) \
+ do { \
+ while (list != NULL) { \
+ struct block_list *old = list; \
+ list = list->next; \
+ free (old->address); \
+ free (old); \
+ } \
+ } while (0)
+# undef alloca
+# define alloca(size) (malloc (size))
+# define freea(p) free (p)
+#endif /* have alloca */
+
+
+#ifdef _LIBC
+/* List of blocks allocated for translations. */
+typedef struct transmem_list
+{
+ struct transmem_list *next;
+ char data[ZERO];
+} transmem_block_t;
+static struct transmem_list *transmem_list;
+#else
+typedef unsigned char transmem_block_t;
+#endif
+
+
+/* Names for the libintl functions are a problem. They must not clash
+ with existing names and they should follow ANSI C. But this source
+ code is also used in GNU C Library where the names have a __
+ prefix. So we have to make a difference here. */
+#ifdef _LIBC
+# define DCIGETTEXT __dcigettext
+#else
+# define DCIGETTEXT libintl_dcigettext
+#endif
+
+/* Lock variable to protect the global data in the gettext implementation. */
+#ifdef _LIBC
+__libc_rwlock_define_initialized (, _nl_state_lock attribute_hidden)
+#endif
+
+/* Checking whether the binaries runs SUID must be done and glibc provides
+ easier methods therefore we make a difference here. */
+#ifdef _LIBC
+# define ENABLE_SECURE __libc_enable_secure
+# define DETERMINE_SECURE
+#else
+# ifndef HAVE_GETUID
+# define getuid() 0
+# endif
+# ifndef HAVE_GETGID
+# define getgid() 0
+# endif
+# ifndef HAVE_GETEUID
+# define geteuid() getuid()
+# endif
+# ifndef HAVE_GETEGID
+# define getegid() getgid()
+# endif
+static int enable_secure;
+# define ENABLE_SECURE (enable_secure == 1)
+# define DETERMINE_SECURE \
+ if (enable_secure == 0) \
+ { \
+ if (getuid () != geteuid () || getgid () != getegid ()) \
+ enable_secure = 1; \
+ else \
+ enable_secure = -1; \
+ }
+#endif
+
+/* Get the function to evaluate the plural expression. */
+#include "eval-plural.h"
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current
+ CATEGORY locale and, if PLURAL is nonzero, search over string
+ depending on the plural form determined by N. */
+char *
+DCIGETTEXT (domainname, msgid1, msgid2, plural, n, category)
+ const char *domainname;
+ const char *msgid1;
+ const char *msgid2;
+ int plural;
+ unsigned long int n;
+ int category;
+{
+#ifndef HAVE_ALLOCA
+ struct block_list *block_list = NULL;
+#endif
+ struct loaded_l10nfile *domain;
+ struct binding *binding;
+ const char *categoryname;
+ const char *categoryvalue;
+ char *dirname, *xdomainname;
+ char *single_locale;
+ char *retval;
+ size_t retlen;
+ int saved_errno;
+#if defined HAVE_TSEARCH || defined _LIBC
+ struct known_translation_t *search;
+ struct known_translation_t **foundp = NULL;
+ size_t msgid_len;
+#endif
+ size_t domainname_len;
+
+ /* If no real MSGID is given return NULL. */
+ if (msgid1 == NULL)
+ return NULL;
+
+#ifdef _LIBC
+ if (category < 0 || category >= __LC_LAST || category == LC_ALL)
+ /* Bogus. */
+ return (plural == 0
+ ? (char *) msgid1
+ /* Use the Germanic plural rule. */
+ : n == 1 ? (char *) msgid1 : (char *) msgid2);
+#endif
+
+ __libc_rwlock_rdlock (_nl_state_lock);
+
+ /* If DOMAINNAME is NULL, we are interested in the default domain. If
+ CATEGORY is not LC_MESSAGES this might not make much sense but the
+ definition left this undefined. */
+ if (domainname == NULL)
+ domainname = _nl_current_default_domain;
+
+ /* OS/2 specific: backward compatibility with older libintl versions */
+#ifdef LC_MESSAGES_COMPAT
+ if (category == LC_MESSAGES_COMPAT)
+ category = LC_MESSAGES;
+#endif
+
+#if defined HAVE_TSEARCH || defined _LIBC
+ msgid_len = strlen (msgid1) + 1;
+
+ /* Try to find the translation among those which we found at
+ some time. */
+ search = (struct known_translation_t *)
+ alloca (offsetof (struct known_translation_t, msgid) + msgid_len);
+ memcpy (search->msgid, msgid1, msgid_len);
+ search->domainname = (char *) domainname;
+ search->category = category;
+
+ foundp = (struct known_translation_t **) tfind (search, &root, transcmp);
+ freea (search);
+ if (foundp != NULL && (*foundp)->counter == _nl_msg_cat_cntr)
+ {
+ /* Now deal with plural. */
+ if (plural)
+ retval = plural_lookup ((*foundp)->domain, n, (*foundp)->translation,
+ (*foundp)->translation_length);
+ else
+ retval = (char *) (*foundp)->translation;
+
+ __libc_rwlock_unlock (_nl_state_lock);
+ return retval;
+ }
+#endif
+
+ /* Preserve the `errno' value. */
+ saved_errno = errno;
+
+ /* See whether this is a SUID binary or not. */
+ DETERMINE_SECURE;
+
+ /* First find matching binding. */
+ for (binding = _nl_domain_bindings; binding != NULL; binding = binding->next)
+ {
+ int compare = strcmp (domainname, binding->domainname);
+ if (compare == 0)
+ /* We found it! */
+ break;
+ if (compare < 0)
+ {
+ /* It is not in the list. */
+ binding = NULL;
+ break;
+ }
+ }
+
+ if (binding == NULL)
+ dirname = (char *) INTUSE(_nl_default_dirname);
+ else if (IS_ABSOLUTE_PATH (binding->dirname))
+ dirname = binding->dirname;
+ else
+ {
+ /* We have a relative path. Make it absolute now. */
+ size_t dirname_len = strlen (binding->dirname) + 1;
+ size_t path_max;
+ char *ret;
+
+ path_max = (unsigned int) PATH_MAX;
+ path_max += 2; /* The getcwd docs say to do this. */
+
+ for (;;)
+ {
+ dirname = (char *) alloca (path_max + dirname_len);
+ ADD_BLOCK (block_list, dirname);
+
+ __set_errno (0);
+ ret = getcwd (dirname, path_max);
+ if (ret != NULL || errno != ERANGE)
+ break;
+
+ path_max += path_max / 2;
+ path_max += PATH_INCR;
+ }
+
+ if (ret == NULL)
+ /* We cannot get the current working directory. Don't signal an
+ error but simply return the default string. */
+ goto return_untranslated;
+
+ stpcpy (stpcpy (strchr (dirname, '\0'), "/"), binding->dirname);
+ }
+
+ /* Now determine the symbolic name of CATEGORY and its value. */
+ categoryname = category_to_name (category);
+ categoryvalue = guess_category_value (category, categoryname);
+
+ domainname_len = strlen (domainname);
+ xdomainname = (char *) alloca (strlen (categoryname)
+ + domainname_len + 5);
+ ADD_BLOCK (block_list, xdomainname);
+
+ stpcpy (mempcpy (stpcpy (stpcpy (xdomainname, categoryname), "/"),
+ domainname, domainname_len),
+ ".mo");
+
+ /* Creating working area. */
+ single_locale = (char *) alloca (strlen (categoryvalue) + 1);
+ ADD_BLOCK (block_list, single_locale);
+
+
+ /* Search for the given string. This is a loop because we perhaps
+ got an ordered list of languages to consider for the translation. */
+ while (1)
+ {
+ /* Make CATEGORYVALUE point to the next element of the list. */
+ while (categoryvalue[0] != '\0' && categoryvalue[0] == ':')
+ ++categoryvalue;
+ if (categoryvalue[0] == '\0')
+ {
+ /* The whole contents of CATEGORYVALUE has been searched but
+ no valid entry has been found. We solve this situation
+ by implicitly appending a "C" entry, i.e. no translation
+ will take place. */
+ single_locale[0] = 'C';
+ single_locale[1] = '\0';
+ }
+ else
+ {
+ char *cp = single_locale;
+ while (categoryvalue[0] != '\0' && categoryvalue[0] != ':')
+ *cp++ = *categoryvalue++;
+ *cp = '\0';
+
+ /* When this is a SUID binary we must not allow accessing files
+ outside the dedicated directories. */
+ if (ENABLE_SECURE && IS_PATH_WITH_DIR (single_locale))
+ /* Ingore this entry. */
+ continue;
+ }
+
+ /* If the current locale value is C (or POSIX) we don't load a
+ domain. Return the MSGID. */
+ if (strcmp (single_locale, "C") == 0
+ || strcmp (single_locale, "POSIX") == 0)
+ break;
+
+ /* Find structure describing the message catalog matching the
+ DOMAINNAME and CATEGORY. */
+ domain = _nl_find_domain (dirname, single_locale, xdomainname, binding);
+
+ if (domain != NULL)
+ {
+ retval = _nl_find_msg (domain, binding, msgid1, &retlen);
+
+ if (retval == NULL)
+ {
+ int cnt;
+
+ for (cnt = 0; domain->successor[cnt] != NULL; ++cnt)
+ {
+ retval = _nl_find_msg (domain->successor[cnt], binding,
+ msgid1, &retlen);
+
+ if (retval != NULL)
+ {
+ domain = domain->successor[cnt];
+ break;
+ }
+ }
+ }
+
+ if (retval != NULL)
+ {
+ /* Found the translation of MSGID1 in domain DOMAIN:
+ starting at RETVAL, RETLEN bytes. */
+ FREE_BLOCKS (block_list);
+#if defined HAVE_TSEARCH || defined _LIBC
+ if (foundp == NULL)
+ {
+ /* Create a new entry and add it to the search tree. */
+ struct known_translation_t *newp;
+
+ newp = (struct known_translation_t *)
+ malloc (offsetof (struct known_translation_t, msgid)
+ + msgid_len + domainname_len + 1);
+ if (newp != NULL)
+ {
+ newp->domainname =
+ mempcpy (newp->msgid, msgid1, msgid_len);
+ memcpy (newp->domainname, domainname, domainname_len + 1);
+ newp->category = category;
+ newp->counter = _nl_msg_cat_cntr;
+ newp->domain = domain;
+ newp->translation = retval;
+ newp->translation_length = retlen;
+
+ /* Insert the entry in the search tree. */
+ foundp = (struct known_translation_t **)
+ tsearch (newp, &root, transcmp);
+ if (foundp == NULL
+ || __builtin_expect (*foundp != newp, 0))
+ /* The insert failed. */
+ free (newp);
+ }
+ }
+ else
+ {
+ /* We can update the existing entry. */
+ (*foundp)->counter = _nl_msg_cat_cntr;
+ (*foundp)->domain = domain;
+ (*foundp)->translation = retval;
+ (*foundp)->translation_length = retlen;
+ }
+#endif
+ __set_errno (saved_errno);
+
+ /* Now deal with plural. */
+ if (plural)
+ retval = plural_lookup (domain, n, retval, retlen);
+
+ __libc_rwlock_unlock (_nl_state_lock);
+ return retval;
+ }
+ }
+ }
+
+ return_untranslated:
+ /* Return the untranslated MSGID. */
+ FREE_BLOCKS (block_list);
+ __libc_rwlock_unlock (_nl_state_lock);
+#ifndef _LIBC
+ if (!ENABLE_SECURE)
+ {
+ extern void _nl_log_untranslated PARAMS ((const char *logfilename,
+ const char *domainname,
+ const char *msgid1,
+ const char *msgid2,
+ int plural));
+ const char *logfilename = getenv ("GETTEXT_LOG_UNTRANSLATED");
+
+ if (logfilename != NULL && logfilename[0] != '\0')
+ _nl_log_untranslated (logfilename, domainname, msgid1, msgid2, plural);
+ }
+#endif
+ __set_errno (saved_errno);
+ return (plural == 0
+ ? (char *) msgid1
+ /* Use the Germanic plural rule. */
+ : n == 1 ? (char *) msgid1 : (char *) msgid2);
+}
+
+
+char *
+internal_function
+_nl_find_msg (domain_file, domainbinding, msgid, lengthp)
+ struct loaded_l10nfile *domain_file;
+ struct binding *domainbinding;
+ const char *msgid;
+ size_t *lengthp;
+{
+ struct loaded_domain *domain;
+ nls_uint32 nstrings;
+ size_t act;
+ char *result;
+ size_t resultlen;
+
+ if (domain_file->decided == 0)
+ _nl_load_domain (domain_file, domainbinding);
+
+ if (domain_file->data == NULL)
+ return NULL;
+
+ domain = (struct loaded_domain *) domain_file->data;
+
+ nstrings = domain->nstrings;
+
+ /* Locate the MSGID and its translation. */
+ if (domain->hash_tab != NULL)
+ {
+ /* Use the hashing table. */
+ nls_uint32 len = strlen (msgid);
+ nls_uint32 hash_val = hash_string (msgid);
+ nls_uint32 idx = hash_val % domain->hash_size;
+ nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
+
+ while (1)
+ {
+ nls_uint32 nstr =
+ W (domain->must_swap_hash_tab, domain->hash_tab[idx]);
+
+ if (nstr == 0)
+ /* Hash table entry is empty. */
+ return NULL;
+
+ nstr--;
+
+ /* Compare msgid with the original string at index nstr.
+ We compare the lengths with >=, not ==, because plural entries
+ are represented by strings with an embedded NUL. */
+ if (nstr < nstrings
+ ? W (domain->must_swap, domain->orig_tab[nstr].length) >= len
+ && (strcmp (msgid,
+ domain->data + W (domain->must_swap,
+ domain->orig_tab[nstr].offset))
+ == 0)
+ : domain->orig_sysdep_tab[nstr - nstrings].length > len
+ && (strcmp (msgid,
+ domain->orig_sysdep_tab[nstr - nstrings].pointer)
+ == 0))
+ {
+ act = nstr;
+ goto found;
+ }
+
+ if (idx >= domain->hash_size - incr)
+ idx -= domain->hash_size - incr;
+ else
+ idx += incr;
+ }
+ /* NOTREACHED */
+ }
+ else
+ {
+ /* Try the default method: binary search in the sorted array of
+ messages. */
+ size_t top, bottom;
+
+ bottom = 0;
+ top = nstrings;
+ while (bottom < top)
+ {
+ int cmp_val;
+
+ act = (bottom + top) / 2;
+ cmp_val = strcmp (msgid, (domain->data
+ + W (domain->must_swap,
+ domain->orig_tab[act].offset)));
+ if (cmp_val < 0)
+ top = act;
+ else if (cmp_val > 0)
+ bottom = act + 1;
+ else
+ goto found;
+ }
+ /* No translation was found. */
+ return NULL;
+ }
+
+ found:
+ /* The translation was found at index ACT. If we have to convert the
+ string to use a different character set, this is the time. */
+ if (act < nstrings)
+ {
+ result = (char *)
+ (domain->data + W (domain->must_swap, domain->trans_tab[act].offset));
+ resultlen = W (domain->must_swap, domain->trans_tab[act].length) + 1;
+ }
+ else
+ {
+ result = (char *) domain->trans_sysdep_tab[act - nstrings].pointer;
+ resultlen = domain->trans_sysdep_tab[act - nstrings].length;
+ }
+
+#if defined _LIBC || HAVE_ICONV
+ if (domain->codeset_cntr
+ != (domainbinding != NULL ? domainbinding->codeset_cntr : 0))
+ {
+ /* The domain's codeset has changed through bind_textdomain_codeset()
+ since the message catalog was initialized or last accessed. We
+ have to reinitialize the converter. */
+ _nl_free_domain_conv (domain);
+ _nl_init_domain_conv (domain_file, domain, domainbinding);
+ }
+
+ if (
+# ifdef _LIBC
+ domain->conv != (__gconv_t) -1
+# else
+# if HAVE_ICONV
+ domain->conv != (iconv_t) -1
+# endif
+# endif
+ )
+ {
+ /* We are supposed to do a conversion. First allocate an
+ appropriate table with the same structure as the table
+ of translations in the file, where we can put the pointers
+ to the converted strings in.
+ There is a slight complication with plural entries. They
+ are represented by consecutive NUL terminated strings. We
+ handle this case by converting RESULTLEN bytes, including
+ NULs. */
+
+ if (domain->conv_tab == NULL
+ && ((domain->conv_tab =
+ (char **) calloc (nstrings + domain->n_sysdep_strings,
+ sizeof (char *)))
+ == NULL))
+ /* Mark that we didn't succeed allocating a table. */
+ domain->conv_tab = (char **) -1;
+
+ if (__builtin_expect (domain->conv_tab == (char **) -1, 0))
+ /* Nothing we can do, no more memory. */
+ goto converted;
+
+ if (domain->conv_tab[act] == NULL)
+ {
+ /* We haven't used this string so far, so it is not
+ translated yet. Do this now. */
+ /* We use a bit more efficient memory handling.
+ We allocate always larger blocks which get used over
+ time. This is faster than many small allocations. */
+ __libc_lock_define_initialized (static, lock)
+# define INITIAL_BLOCK_SIZE 4080
+ static unsigned char *freemem;
+ static size_t freemem_size;
+
+ const unsigned char *inbuf;
+ unsigned char *outbuf;
+ int malloc_count;
+# ifndef _LIBC
+ transmem_block_t *transmem_list = NULL;
+# endif
+
+ __libc_lock_lock (lock);
+
+ inbuf = (const unsigned char *) result;
+ outbuf = freemem + sizeof (size_t);
+
+ malloc_count = 0;
+ while (1)
+ {
+ transmem_block_t *newmem;
+# ifdef _LIBC
+ size_t non_reversible;
+ int res;
+
+ if (freemem_size < sizeof (size_t))
+ goto resize_freemem;
+
+ res = __gconv (domain->conv,
+ &inbuf, inbuf + resultlen,
+ &outbuf,
+ outbuf + freemem_size - sizeof (size_t),
+ &non_reversible);
+
+ if (res == __GCONV_OK || res == __GCONV_EMPTY_INPUT)
+ break;
+
+ if (res != __GCONV_FULL_OUTPUT)
+ {
+ __libc_lock_unlock (lock);
+ goto converted;
+ }
+
+ inbuf = result;
+# else
+# if HAVE_ICONV
+ const char *inptr = (const char *) inbuf;
+ size_t inleft = resultlen;
+ char *outptr = (char *) outbuf;
+ size_t outleft;
+
+ if (freemem_size < sizeof (size_t))
+ goto resize_freemem;
+
+ outleft = freemem_size - sizeof (size_t);
+ if (iconv (domain->conv,
+ (ICONV_CONST char **) &inptr, &inleft,
+ &outptr, &outleft)
+ != (size_t) (-1))
+ {
+ outbuf = (unsigned char *) outptr;
+ break;
+ }
+ if (errno != E2BIG)
+ {
+ __libc_lock_unlock (lock);
+ goto converted;
+ }
+# endif
+# endif
+
+ resize_freemem:
+ /* We must allocate a new buffer or resize the old one. */
+ if (malloc_count > 0)
+ {
+ ++malloc_count;
+ freemem_size = malloc_count * INITIAL_BLOCK_SIZE;
+ newmem = (transmem_block_t *) realloc (transmem_list,
+ freemem_size);
+# ifdef _LIBC
+ if (newmem != NULL)
+ transmem_list = transmem_list->next;
+ else
+ {
+ struct transmem_list *old = transmem_list;
+
+ transmem_list = transmem_list->next;
+ free (old);
+ }
+# endif
+ }
+ else
+ {
+ malloc_count = 1;
+ freemem_size = INITIAL_BLOCK_SIZE;
+ newmem = (transmem_block_t *) malloc (freemem_size);
+ }
+ if (__builtin_expect (newmem == NULL, 0))
+ {
+ freemem = NULL;
+ freemem_size = 0;
+ __libc_lock_unlock (lock);
+ goto converted;
+ }
+
+# ifdef _LIBC
+ /* Add the block to the list of blocks we have to free
+ at some point. */
+ newmem->next = transmem_list;
+ transmem_list = newmem;
+
+ freemem = newmem->data;
+ freemem_size -= offsetof (struct transmem_list, data);
+# else
+ transmem_list = newmem;
+ freemem = newmem;
+# endif
+
+ outbuf = freemem + sizeof (size_t);
+ }
+
+ /* We have now in our buffer a converted string. Put this
+ into the table of conversions. */
+ *(size_t *) freemem = outbuf - freemem - sizeof (size_t);
+ domain->conv_tab[act] = (char *) freemem;
+ /* Shrink freemem, but keep it aligned. */
+ freemem_size -= outbuf - freemem;
+ freemem = outbuf;
+ freemem += freemem_size & (alignof (size_t) - 1);
+ freemem_size = freemem_size & ~ (alignof (size_t) - 1);
+
+ __libc_lock_unlock (lock);
+ }
+
+ /* Now domain->conv_tab[act] contains the translation of all
+ the plural variants. */
+ result = domain->conv_tab[act] + sizeof (size_t);
+ resultlen = *(size_t *) domain->conv_tab[act];
+ }
+
+ converted:
+ /* The result string is converted. */
+
+#endif /* _LIBC || HAVE_ICONV */
+
+ *lengthp = resultlen;
+ return result;
+}
+
+
+/* Look up a plural variant. */
+static char *
+internal_function
+plural_lookup (domain, n, translation, translation_len)
+ struct loaded_l10nfile *domain;
+ unsigned long int n;
+ const char *translation;
+ size_t translation_len;
+{
+ struct loaded_domain *domaindata = (struct loaded_domain *) domain->data;
+ unsigned long int index;
+ const char *p;
+
+ index = plural_eval (domaindata->plural, n);
+ if (index >= domaindata->nplurals)
+ /* This should never happen. It means the plural expression and the
+ given maximum value do not match. */
+ index = 0;
+
+ /* Skip INDEX strings at TRANSLATION. */
+ p = translation;
+ while (index-- > 0)
+ {
+#ifdef _LIBC
+ p = __rawmemchr (p, '\0');
+#else
+ p = strchr (p, '\0');
+#endif
+ /* And skip over the NUL byte. */
+ p++;
+
+ if (p >= translation + translation_len)
+ /* This should never happen. It means the plural expression
+ evaluated to a value larger than the number of variants
+ available for MSGID1. */
+ return (char *) translation;
+ }
+ return (char *) p;
+}
+
+#ifndef _LIBC
+/* Return string representation of locale CATEGORY. */
+static const char *
+internal_function
+category_to_name (category)
+ int category;
+{
+ const char *retval;
+
+ switch (category)
+ {
+#ifdef LC_COLLATE
+ case LC_COLLATE:
+ retval = "LC_COLLATE";
+ break;
+#endif
+#ifdef LC_CTYPE
+ case LC_CTYPE:
+ retval = "LC_CTYPE";
+ break;
+#endif
+#ifdef LC_MONETARY
+ case LC_MONETARY:
+ retval = "LC_MONETARY";
+ break;
+#endif
+#ifdef LC_NUMERIC
+ case LC_NUMERIC:
+ retval = "LC_NUMERIC";
+ break;
+#endif
+#ifdef LC_TIME
+ case LC_TIME:
+ retval = "LC_TIME";
+ break;
+#endif
+#ifdef LC_MESSAGES
+ case LC_MESSAGES:
+ retval = "LC_MESSAGES";
+ break;
+#endif
+#ifdef LC_RESPONSE
+ case LC_RESPONSE:
+ retval = "LC_RESPONSE";
+ break;
+#endif
+#ifdef LC_ALL
+ case LC_ALL:
+ /* This might not make sense but is perhaps better than any other
+ value. */
+ retval = "LC_ALL";
+ break;
+#endif
+ default:
+ /* If you have a better idea for a default value let me know. */
+ retval = "LC_XXX";
+ }
+
+ return retval;
+}
+#endif
+
+/* Guess value of current locale from value of the environment variables. */
+static const char *
+internal_function
+guess_category_value (category, categoryname)
+ int category;
+ const char *categoryname;
+{
+ const char *language;
+ const char *retval;
+
+ /* The highest priority value is the `LANGUAGE' environment
+ variable. But we don't use the value if the currently selected
+ locale is the C locale. This is a GNU extension. */
+ language = getenv ("LANGUAGE");
+ if (language != NULL && language[0] == '\0')
+ language = NULL;
+
+ /* We have to proceed with the POSIX methods of looking to `LC_ALL',
+ `LC_xxx', and `LANG'. On some systems this can be done by the
+ `setlocale' function itself. */
+#ifdef _LIBC
+ retval = __current_locale_name (category);
+#else
+ retval = _nl_locale_name (category, categoryname);
+#endif
+
+ /* Ignore LANGUAGE if the locale is set to "C" because
+ 1. "C" locale usually uses the ASCII encoding, and most international
+ messages use non-ASCII characters. These characters get displayed
+ as question marks (if using glibc's iconv()) or as invalid 8-bit
+ characters (because other iconv()s refuse to convert most non-ASCII
+ characters to ASCII). In any case, the output is ugly.
+ 2. The precise output of some programs in the "C" locale is specified
+ by POSIX and should not depend on environment variables like
+ "LANGUAGE". We allow such programs to use gettext(). */
+ return language != NULL && strcmp (retval, "C") != 0 ? language : retval;
+}
+
+/* @@ begin of epilog @@ */
+
+/* We don't want libintl.a to depend on any other library. So we
+ avoid the non-standard function stpcpy. In GNU C Library this
+ function is available, though. Also allow the symbol HAVE_STPCPY
+ to be defined. */
+#if !_LIBC && !HAVE_STPCPY
+static char *
+stpcpy (dest, src)
+ char *dest;
+ const char *src;
+{
+ while ((*dest++ = *src++) != '\0')
+ /* Do nothing. */ ;
+ return dest - 1;
+}
+#endif
+
+#if !_LIBC && !HAVE_MEMPCPY
+static void *
+mempcpy (dest, src, n)
+ void *dest;
+ const void *src;
+ size_t n;
+{
+ return (void *) ((char *) memcpy (dest, src, n) + n);
+}
+#endif
+
+
+#ifdef _LIBC
+/* If we want to free all resources we have to do some work at
+ program's end. */
+libc_freeres_fn (free_mem)
+{
+ void *old;
+
+ while (_nl_domain_bindings != NULL)
+ {
+ struct binding *oldp = _nl_domain_bindings;
+ _nl_domain_bindings = _nl_domain_bindings->next;
+ if (oldp->dirname != INTUSE(_nl_default_dirname))
+ /* Yes, this is a pointer comparison. */
+ free (oldp->dirname);
+ free (oldp->codeset);
+ free (oldp);
+ }
+
+ if (_nl_current_default_domain != _nl_default_default_domain)
+ /* Yes, again a pointer comparison. */
+ free ((char *) _nl_current_default_domain);
+
+ /* Remove the search tree with the known translations. */
+ __tdestroy (root, free);
+ root = NULL;
+
+ while (transmem_list != NULL)
+ {
+ old = transmem_list;
+ transmem_list = transmem_list->next;
+ free (old);
+ }
+}
+#endif
--- /dev/null
+/* Implementation of the dcngettext(3) function.
+ Copyright (C) 1995-1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem. They must not clash
+ with existing names and they should follow ANSI C. But this source
+ code is also used in GNU C Library where the names have a __
+ prefix. So we have to make a difference here. */
+#ifdef _LIBC
+# define DCNGETTEXT __dcngettext
+# define DCIGETTEXT __dcigettext
+#else
+# define DCNGETTEXT libintl_dcngettext
+# define DCIGETTEXT libintl_dcigettext
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+ locale. */
+char *
+DCNGETTEXT (domainname, msgid1, msgid2, n, category)
+ const char *domainname;
+ const char *msgid1;
+ const char *msgid2;
+ unsigned long int n;
+ int category;
+{
+ return DCIGETTEXT (domainname, msgid1, msgid2, 1, n, category);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library. */
+weak_alias (__dcngettext, dcngettext);
+#endif
-/* dgettext.c -- implementation of the dgettext(3) function
- Copyright (C) 1995 Software Foundation, Inc.
+/* Implementation of the dgettext(3) function.
+ Copyright (C) 1995-1997, 2000, 2001, 2002 Free Software Foundation, Inc.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
-#if defined HAVE_LOCALE_H || defined _LIBC
-# include <locale.h>
-#endif
+#include <locale.h>
+#include "gettextP.h"
#ifdef _LIBC
# include <libintl.h>
#else
-# include "libgettext.h"
+# include "libgnuintl.h"
#endif
/* @@ end of prolog @@ */
prefix. So we have to make a difference here. */
#ifdef _LIBC
# define DGETTEXT __dgettext
-# define DCGETTEXT __dcgettext
+# define DCGETTEXT INTUSE(__dcgettext)
#else
-# define DGETTEXT dgettext__
-# define DCGETTEXT dcgettext__
+# define DGETTEXT libintl_dgettext
+# define DCGETTEXT libintl_dcgettext
#endif
/* Look up MSGID in the DOMAINNAME message catalog of the current
--- /dev/null
+/* Implementation of the dngettext(3) function.
+ Copyright (C) 1995-1997, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <locale.h>
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem. They must not clash
+ with existing names and they should follow ANSI C. But this source
+ code is also used in GNU C Library where the names have a __
+ prefix. So we have to make a difference here. */
+#ifdef _LIBC
+# define DNGETTEXT __dngettext
+# define DCNGETTEXT __dcngettext
+#else
+# define DNGETTEXT libintl_dngettext
+# define DCNGETTEXT libintl_dcngettext
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog of the current
+ LC_MESSAGES locale and skip message according to the plural form. */
+char *
+DNGETTEXT (domainname, msgid1, msgid2, n)
+ const char *domainname;
+ const char *msgid1;
+ const char *msgid2;
+ unsigned long int n;
+{
+ return DCNGETTEXT (domainname, msgid1, msgid2, n, LC_MESSAGES);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library. */
+weak_alias (__dngettext, dngettext);
+#endif
--- /dev/null
+/* Plural expression evaluation.
+ Copyright (C) 2000-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef STATIC
+#define STATIC static
+#endif
+
+/* Evaluate the plural expression and return an index value. */
+STATIC unsigned long int plural_eval PARAMS ((struct expression *pexp,
+ unsigned long int n))
+ internal_function;
+
+STATIC
+unsigned long int
+internal_function
+plural_eval (pexp, n)
+ struct expression *pexp;
+ unsigned long int n;
+{
+ switch (pexp->nargs)
+ {
+ case 0:
+ switch (pexp->operation)
+ {
+ case var:
+ return n;
+ case num:
+ return pexp->val.num;
+ default:
+ break;
+ }
+ /* NOTREACHED */
+ break;
+ case 1:
+ {
+ /* pexp->operation must be lnot. */
+ unsigned long int arg = plural_eval (pexp->val.args[0], n);
+ return ! arg;
+ }
+ case 2:
+ {
+ unsigned long int leftarg = plural_eval (pexp->val.args[0], n);
+ if (pexp->operation == lor)
+ return leftarg || plural_eval (pexp->val.args[1], n);
+ else if (pexp->operation == land)
+ return leftarg && plural_eval (pexp->val.args[1], n);
+ else
+ {
+ unsigned long int rightarg = plural_eval (pexp->val.args[1], n);
+
+ switch (pexp->operation)
+ {
+ case mult:
+ return leftarg * rightarg;
+ case divide:
+#if !INTDIV0_RAISES_SIGFPE
+ if (rightarg == 0)
+ raise (SIGFPE);
+#endif
+ return leftarg / rightarg;
+ case module:
+#if !INTDIV0_RAISES_SIGFPE
+ if (rightarg == 0)
+ raise (SIGFPE);
+#endif
+ return leftarg % rightarg;
+ case plus:
+ return leftarg + rightarg;
+ case minus:
+ return leftarg - rightarg;
+ case less_than:
+ return leftarg < rightarg;
+ case greater_than:
+ return leftarg > rightarg;
+ case less_or_equal:
+ return leftarg <= rightarg;
+ case greater_or_equal:
+ return leftarg >= rightarg;
+ case equal:
+ return leftarg == rightarg;
+ case not_equal:
+ return leftarg != rightarg;
+ default:
+ break;
+ }
+ }
+ /* NOTREACHED */
+ break;
+ }
+ case 3:
+ {
+ /* pexp->operation must be qmop. */
+ unsigned long int boolarg = plural_eval (pexp->val.args[0], n);
+ return plural_eval (pexp->val.args[boolarg ? 1 : 2], n);
+ }
+ }
+ /* NOTREACHED */
+ return 0;
+}
-/* Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
- Contributed by Ulrich Drepper <drepper@gnu.org>, 1995.
+/* Copyright (C) 1995-1998, 2000, 2001 Free Software Foundation, Inc.
+ Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifdef HAVE_CONFIG_H
# include <config.h>
/* @@ end of prolog @@ */
+char *
+_nl_find_language (name)
+ const char *name;
+{
+ while (name[0] != '\0' && name[0] != '_' && name[0] != '@'
+ && name[0] != '+' && name[0] != ',')
+ ++name;
+
+ return (char *) name;
+}
+
+
int
_nl_explode_name (name, language, modifier, territory, codeset,
normalized_codeset, special, sponsor, revision)
mask = 0;
syntax = undecided;
*language = cp = name;
- while (cp[0] != '\0' && cp[0] != '_' && cp[0] != '@'
- && cp[0] != '+' && cp[0] != ',')
- ++cp;
+ cp = _nl_find_language (*language);
if (*language == cp)
/* This does not make sense: language has to be specified. Use
/* Handle list of needed message catalogs
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+ Copyright (C) 1995-1999, 2000, 2001 Free Software Foundation, Inc.
Written by Ulrich Drepper <drepper@gnu.org>, 1995.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
-#include <ctype.h>
-#include <errno.h>
#include <stdio.h>
#include <sys/types.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-# ifdef HAVE_MALLOC_H
-# include <malloc.h>
-# else
-void free ();
-# endif
-#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-# define strchr index
-# endif
-#endif
+#include <stdlib.h>
+#include <string.h>
#if defined HAVE_UNISTD_H || defined _LIBC
# include <unistd.h>
#endif
-#include "gettext.h"
#include "gettextP.h"
#ifdef _LIBC
# include <libintl.h>
#else
-# include "libgettext.h"
+# include "libgnuintl.h"
#endif
/* @@ end of prolog @@ */
the DOMAINNAME and CATEGORY parameters with respect to the currently
established bindings. */
struct loaded_l10nfile *
-_nl_find_domain (dirname, locale, domainname)
+internal_function
+_nl_find_domain (dirname, locale, domainname, domainbinding)
const char *dirname;
char *locale;
const char *domainname;
+ struct binding *domainbinding;
{
struct loaded_l10nfile *retval;
const char *language;
language[_territory][+audience][+special][,[sponsor][_revision]]
- Beside the first all of them are allowed to be missing. If the
- full specified locale is not found, the less specific one are
- looked for. The various part will be stripped of according to
+ Beside the first part all of them are allowed to be missing. If
+ the full specified locale is not found, the less specific one are
+ looked for. The various parts will be stripped off according to
the following order:
(1) revision
(2) sponsor
int cnt;
if (retval->decided == 0)
- _nl_load_domain (retval);
+ _nl_load_domain (retval, domainbinding);
if (retval->data != NULL)
return retval;
for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
{
if (retval->successor[cnt]->decided == 0)
- _nl_load_domain (retval->successor[cnt]);
+ _nl_load_domain (retval->successor[cnt], domainbinding);
if (retval->successor[cnt]->data != NULL)
break;
alias_value = _nl_expand_alias (locale);
if (alias_value != NULL)
{
+#if defined _LIBC || defined HAVE_STRDUP
+ locale = strdup (alias_value);
+ if (locale == NULL)
+ return NULL;
+#else
size_t len = strlen (alias_value) + 1;
locale = (char *) malloc (len);
if (locale == NULL)
return NULL;
memcpy (locale, alias_value, len);
+#endif
}
/* Now we determine the single parts of the locale name. First
return NULL;
if (retval->decided == 0)
- _nl_load_domain (retval);
+ _nl_load_domain (retval, domainbinding);
if (retval->data == NULL)
{
int cnt;
for (cnt = 0; retval->successor[cnt] != NULL; ++cnt)
{
if (retval->successor[cnt]->decided == 0)
- _nl_load_domain (retval->successor[cnt]);
+ _nl_load_domain (retval->successor[cnt], domainbinding);
if (retval->successor[cnt]->data != NULL)
break;
}
if (alias_value != NULL)
free (locale);
+ /* The space for normalized_codeset is dynamically allocated. Free it. */
+ if (mask & XPG_NORM_CODESET)
+ free ((void *) normalized_codeset);
+
return retval;
}
+
+
+#ifdef _LIBC
+libc_freeres_fn (free_mem)
+{
+ struct loaded_l10nfile *runp = _nl_loaded_domains;
+
+ while (runp != NULL)
+ {
+ struct loaded_l10nfile *here = runp;
+ if (runp->data != NULL)
+ _nl_unload_domain ((struct loaded_domain *) runp->data);
+ runp = runp->next;
+ free ((char *) here->filename);
+ free (here);
+ }
+}
+#endif
-/* Implementation of gettext(3) function
- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+/* Implementation of gettext(3) function.
+ Copyright (C) 1995, 1997, 2000, 2001, 2002 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifdef HAVE_CONFIG_H
# include <config.h>
# define __need_NULL
# include <stddef.h>
#else
-# ifdef STDC_HEADERS
-# include <stdlib.h> /* Just for NULL. */
-# else
-# ifdef HAVE_STRING_H
-# include <string.h>
-# else
-# define NULL ((void *) 0)
-# endif
-# endif
+# include <stdlib.h> /* Just for NULL. */
#endif
+#include "gettextP.h"
#ifdef _LIBC
# include <libintl.h>
#else
-# include "libgettext.h"
+# include "libgnuintl.h"
#endif
/* @@ end of prolog @@ */
prefix. So we have to make a difference here. */
#ifdef _LIBC
# define GETTEXT __gettext
-# define DGETTEXT __dgettext
+# define DCGETTEXT INTUSE(__dcgettext)
#else
-# define GETTEXT gettext__
-# define DGETTEXT dgettext__
+# define GETTEXT libintl_gettext
+# define DCGETTEXT libintl_dcgettext
#endif
/* Look up MSGID in the current default message catalog for the current
GETTEXT (msgid)
const char *msgid;
{
- return DGETTEXT (NULL, msgid);
+ return DCGETTEXT (NULL, msgid, LC_MESSAGES);
}
#ifdef _LIBC
+++ /dev/null
-/* Internal header for GNU gettext internationalization functions
- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#ifndef _GETTEXT_H
-#define _GETTEXT_H 1
-
-#include <stdio.h>
-
-#if HAVE_LIMITS_H || _LIBC
-# include <limits.h>
-#endif
-
-/* @@ end of prolog @@ */
-
-/* The magic number of the GNU message catalog format. */
-#define _MAGIC 0x950412de
-#define _MAGIC_SWAPPED 0xde120495
-
-/* Revision number of the currently used .mo (binary) file format. */
-#define MO_REVISION_NUMBER 0
-
-/* The following contortions are an attempt to use the C preprocessor
- to determine an unsigned integral type that is 32 bits wide. An
- alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
- doing that would require that the configure script compile and *run*
- the resulting executable. Locally running cross-compiled executables
- is usually not possible. */
-
-#if __STDC__
-# define UINT_MAX_32_BITS 4294967295U
-#else
-# define UINT_MAX_32_BITS 0xFFFFFFFF
-#endif
-
-/* If UINT_MAX isn't defined, assume it's a 32-bit type.
- This should be valid for all systems GNU cares about because
- that doesn't include 16-bit systems, and only modern systems
- (that certainly have <limits.h>) have 64+-bit integral types. */
-
-#ifndef UINT_MAX
-# define UINT_MAX UINT_MAX_32_BITS
-#endif
-
-#if UINT_MAX == UINT_MAX_32_BITS
-typedef unsigned nls_uint32;
-#else
-# if USHRT_MAX == UINT_MAX_32_BITS
-typedef unsigned short nls_uint32;
-# else
-# if ULONG_MAX == UINT_MAX_32_BITS
-typedef unsigned long nls_uint32;
-# else
- /* The following line is intended to throw an error. Using #error is
- not portable enough. */
- "Cannot determine unsigned 32-bit data type."
-# endif
-# endif
-#endif
-
-
-/* Header for binary .mo file format. */
-struct mo_file_header
-{
- /* The magic number. */
- nls_uint32 magic;
- /* The revision number of the file format. */
- nls_uint32 revision;
- /* The number of strings pairs. */
- nls_uint32 nstrings;
- /* Offset of table with start offsets of original strings. */
- nls_uint32 orig_tab_offset;
- /* Offset of table with start offsets of translation strings. */
- nls_uint32 trans_tab_offset;
- /* Size of hashing table. */
- nls_uint32 hash_tab_size;
- /* Offset of first hashing entry. */
- nls_uint32 hash_tab_offset;
-};
-
-struct string_desc
-{
- /* Length of addressed string. */
- nls_uint32 length;
- /* Offset of string in file. */
- nls_uint32 offset;
-};
-
-/* @@ begin of epilog @@ */
-
-#endif /* gettext.h */
-/* Header describing internals of gettext library
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+/* Header describing internals of libintl library.
+ Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
+ Written by Ulrich Drepper <drepper@cygnus.com>, 1995.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifndef _GETTEXTP_H
#define _GETTEXTP_H
+#include <stddef.h> /* Get size_t. */
+
+#ifdef _LIBC
+# include "../iconv/gconv_int.h"
+#else
+# if HAVE_ICONV
+# include <iconv.h>
+# endif
+#endif
+
#include "loadinfo.h"
+#include "gmo.h" /* Get nls_uint32. */
+
/* @@ end of prolog @@ */
#ifndef PARAMS
-# if __STDC__
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
# define PARAMS(args) args
# else
# define PARAMS(args) ()
# endif
#endif
+#ifndef internal_function
+# define internal_function
+#endif
+
+#ifndef attribute_hidden
+# define attribute_hidden
+#endif
+
+/* Tell the compiler when a conditional or integer expression is
+ almost always true or almost always false. */
+#ifndef HAVE_BUILTIN_EXPECT
+# define __builtin_expect(expr, val) (expr)
+#endif
+
#ifndef W
# define W(flag, data) ((flag) ? SWAP (data) : (data))
#endif
-static nls_uint32 SWAP PARAMS ((nls_uint32 i));
-
+#ifdef _LIBC
+# include <byteswap.h>
+# define SWAP(i) bswap_32 (i)
+#else
static inline nls_uint32
SWAP (i)
nls_uint32 i;
{
return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24);
}
+#endif
+/* In-memory representation of system dependent string. */
+struct sysdep_string_desc
+{
+ /* Length of addressed string, including the trailing NUL. */
+ size_t length;
+ /* Pointer to addressed string. */
+ const char *pointer;
+};
+
+/* The representation of an opened message catalog. */
struct loaded_domain
{
+ /* Pointer to memory containing the .mo file. */
const char *data;
+ /* 1 if the memory is mmap()ed, 0 if the memory is malloc()ed. */
+ int use_mmap;
+ /* Size of mmap()ed memory. */
+ size_t mmap_size;
+ /* 1 if the .mo file uses a different endianness than this machine. */
int must_swap;
+ /* Pointer to additional malloc()ed memory. */
+ void *malloced;
+
+ /* Number of static strings pairs. */
nls_uint32 nstrings;
- struct string_desc *orig_tab;
- struct string_desc *trans_tab;
+ /* Pointer to descriptors of original strings in the file. */
+ const struct string_desc *orig_tab;
+ /* Pointer to descriptors of translated strings in the file. */
+ const struct string_desc *trans_tab;
+
+ /* Number of system dependent strings pairs. */
+ nls_uint32 n_sysdep_strings;
+ /* Pointer to descriptors of original sysdep strings. */
+ const struct sysdep_string_desc *orig_sysdep_tab;
+ /* Pointer to descriptors of translated sysdep strings. */
+ const struct sysdep_string_desc *trans_sysdep_tab;
+
+ /* Size of hash table. */
nls_uint32 hash_size;
- nls_uint32 *hash_tab;
+ /* Pointer to hash table. */
+ const nls_uint32 *hash_tab;
+ /* 1 if the hash table uses a different endianness than this machine. */
+ int must_swap_hash_tab;
+
+ int codeset_cntr;
+#ifdef _LIBC
+ __gconv_t conv;
+#else
+# if HAVE_ICONV
+ iconv_t conv;
+# endif
+#endif
+ char **conv_tab;
+
+ struct expression *plural;
+ unsigned long int nplurals;
};
+/* We want to allocate a string at the end of the struct. But ISO C
+ doesn't allow zero sized arrays. */
+#ifdef __GNUC__
+# define ZERO 0
+#else
+# define ZERO 1
+#endif
+
+/* A set of settings bound to a message domain. Used to store settings
+ from bindtextdomain() and bind_textdomain_codeset(). */
struct binding
{
struct binding *next;
- char *domainname;
char *dirname;
+ int codeset_cntr; /* Incremented each time codeset changes. */
+ char *codeset;
+ char domainname[ZERO];
};
+/* A counter which is incremented each time some previous translations
+ become invalid.
+ This variable is part of the external ABI of the GNU libintl. */
+extern int _nl_msg_cat_cntr;
+
+#ifndef _LIBC
+const char *_nl_locale_name PARAMS ((int category, const char *categoryname));
+#endif
+
struct loaded_l10nfile *_nl_find_domain PARAMS ((const char *__dirname,
char *__locale,
- const char *__domainname));
-void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain));
+ const char *__domainname,
+ struct binding *__domainbinding))
+ internal_function;
+void _nl_load_domain PARAMS ((struct loaded_l10nfile *__domain,
+ struct binding *__domainbinding))
+ internal_function;
+void _nl_unload_domain PARAMS ((struct loaded_domain *__domain))
+ internal_function;
+const char *_nl_init_domain_conv PARAMS ((struct loaded_l10nfile *__domain_file,
+ struct loaded_domain *__domain,
+ struct binding *__domainbinding))
+ internal_function;
+void _nl_free_domain_conv PARAMS ((struct loaded_domain *__domain))
+ internal_function;
+
+char *_nl_find_msg PARAMS ((struct loaded_l10nfile *domain_file,
+ struct binding *domainbinding,
+ const char *msgid, size_t *lengthp))
+ internal_function;
+
+#ifdef _LIBC
+extern char *__gettext PARAMS ((const char *__msgid));
+extern char *__dgettext PARAMS ((const char *__domainname,
+ const char *__msgid));
+extern char *__dcgettext PARAMS ((const char *__domainname,
+ const char *__msgid, int __category));
+extern char *__ngettext PARAMS ((const char *__msgid1, const char *__msgid2,
+ unsigned long int __n));
+extern char *__dngettext PARAMS ((const char *__domainname,
+ const char *__msgid1, const char *__msgid2,
+ unsigned long int n));
+extern char *__dcngettext PARAMS ((const char *__domainname,
+ const char *__msgid1, const char *__msgid2,
+ unsigned long int __n, int __category));
+extern char *__dcigettext PARAMS ((const char *__domainname,
+ const char *__msgid1, const char *__msgid2,
+ int __plural, unsigned long int __n,
+ int __category));
+extern char *__textdomain PARAMS ((const char *__domainname));
+extern char *__bindtextdomain PARAMS ((const char *__domainname,
+ const char *__dirname));
+extern char *__bind_textdomain_codeset PARAMS ((const char *__domainname,
+ const char *__codeset));
+#else
+/* Declare the exported libintl_* functions, in a way that allows us to
+ call them under their real name. */
+# define _INTL_REDIRECT_MACROS
+# include "libgnuintl.h"
+extern char *libintl_dcigettext PARAMS ((const char *__domainname,
+ const char *__msgid1,
+ const char *__msgid2,
+ int __plural, unsigned long int __n,
+ int __category));
+#endif
/* @@ begin of epilog @@ */
--- /dev/null
+/* Description of GNU message catalog format: general file layout.
+ Copyright (C) 1995, 1997, 2000-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _GETTEXT_H
+#define _GETTEXT_H 1
+
+#include <limits.h>
+
+/* @@ end of prolog @@ */
+
+/* The magic number of the GNU message catalog format. */
+#define _MAGIC 0x950412de
+#define _MAGIC_SWAPPED 0xde120495
+
+/* Revision number of the currently used .mo (binary) file format. */
+#define MO_REVISION_NUMBER 0
+
+/* The following contortions are an attempt to use the C preprocessor
+ to determine an unsigned integral type that is 32 bits wide. An
+ alternative approach is to use autoconf's AC_CHECK_SIZEOF macro, but
+ as of version autoconf-2.13, the AC_CHECK_SIZEOF macro doesn't work
+ when cross-compiling. */
+
+#if __STDC__
+# define UINT_MAX_32_BITS 4294967295U
+#else
+# define UINT_MAX_32_BITS 0xFFFFFFFF
+#endif
+
+/* If UINT_MAX isn't defined, assume it's a 32-bit type.
+ This should be valid for all systems GNU cares about because
+ that doesn't include 16-bit systems, and only modern systems
+ (that certainly have <limits.h>) have 64+-bit integral types. */
+
+#ifndef UINT_MAX
+# define UINT_MAX UINT_MAX_32_BITS
+#endif
+
+#if UINT_MAX == UINT_MAX_32_BITS
+typedef unsigned nls_uint32;
+#else
+# if USHRT_MAX == UINT_MAX_32_BITS
+typedef unsigned short nls_uint32;
+# else
+# if ULONG_MAX == UINT_MAX_32_BITS
+typedef unsigned long nls_uint32;
+# else
+ /* The following line is intended to throw an error. Using #error is
+ not portable enough. */
+ "Cannot determine unsigned 32-bit data type."
+# endif
+# endif
+#endif
+
+
+/* Header for binary .mo file format. */
+struct mo_file_header
+{
+ /* The magic number. */
+ nls_uint32 magic;
+ /* The revision number of the file format. */
+ nls_uint32 revision;
+
+ /* The following are only used in .mo files with major revision 0. */
+
+ /* The number of strings pairs. */
+ nls_uint32 nstrings;
+ /* Offset of table with start offsets of original strings. */
+ nls_uint32 orig_tab_offset;
+ /* Offset of table with start offsets of translated strings. */
+ nls_uint32 trans_tab_offset;
+ /* Size of hash table. */
+ nls_uint32 hash_tab_size;
+ /* Offset of first hash table entry. */
+ nls_uint32 hash_tab_offset;
+
+ /* The following are only used in .mo files with minor revision >= 1. */
+
+ /* The number of system dependent segments. */
+ nls_uint32 n_sysdep_segments;
+ /* Offset of table describing system dependent segments. */
+ nls_uint32 sysdep_segments_offset;
+ /* The number of system dependent strings pairs. */
+ nls_uint32 n_sysdep_strings;
+ /* Offset of table with start offsets of original sysdep strings. */
+ nls_uint32 orig_sysdep_tab_offset;
+ /* Offset of table with start offsets of translated sysdep strings. */
+ nls_uint32 trans_sysdep_tab_offset;
+};
+
+/* Descriptor for static string contained in the binary .mo file. */
+struct string_desc
+{
+ /* Length of addressed string, not including the trailing NUL. */
+ nls_uint32 length;
+ /* Offset of string in file. */
+ nls_uint32 offset;
+};
+
+/* The following are only used in .mo files with minor revision >= 1. */
+
+/* Descriptor for system dependent string segment. */
+struct sysdep_segment
+{
+ /* Length of addressed string, including the trailing NUL. */
+ nls_uint32 length;
+ /* Offset of string in file. */
+ nls_uint32 offset;
+};
+
+/* Descriptor for system dependent string. */
+struct sysdep_string
+{
+ /* Offset of static string segments in file. */
+ nls_uint32 offset;
+ /* Alternating sequence of static and system dependent segments.
+ The last segment is a static segment, including the trailing NUL. */
+ struct segment_pair
+ {
+ /* Size of static segment. */
+ nls_uint32 segsize;
+ /* Reference to system dependent string segment, or ~0 at the end. */
+ nls_uint32 sysdepref;
+ } segments[1];
+};
+
+/* Marker for the end of the segments[] array. This has the value 0xFFFFFFFF,
+ regardless whether 'int' is 16 bit, 32 bit, or 64 bit. */
+#define SEGMENTS_END ((nls_uint32) ~0)
+
+/* @@ begin of epilog @@ */
+
+#endif /* gettext.h */
-/* Implements a string hashing function.
- Copyright (C) 1995, 1997 Free Software Foundation, Inc.
+/* Description of GNU message catalog format: string hashing function.
+ Copyright (C) 1995, 1997, 1998, 2000, 2001 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING.LIB. If not,
- write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#ifdef HAVE_VALUES_H
-# include <values.h>
-#endif
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
/* @@ end of prolog @@ */
#ifndef PARAMS
-# if __STDC__
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
# define PARAMS(Args) Args
# else
# define PARAMS(Args) ()
/* Defines the so called `hashpjw' function by P.J. Weinberger
[see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools,
1986, 1987 Bell Telephone Laboratories, Inc.] */
-static unsigned long hash_string PARAMS ((const char *__str_param));
+static unsigned long int hash_string PARAMS ((const char *__str_param));
-static inline unsigned long
+static inline unsigned long int
hash_string (str_param)
const char *str_param;
{
while (*str != '\0')
{
hval <<= 4;
- hval += (unsigned long) *str++;
- g = hval & ((unsigned long) 0xf << (HASHWORDBITS - 4));
+ hval += (unsigned long int) *str++;
+ g = hval & ((unsigned long int) 0xf << (HASHWORDBITS - 4));
if (g != 0)
{
hval ^= g >> (HASHWORDBITS - 8);
/* intl-compat.c - Stub functions to call gettext functions from GNU gettext
Library.
- Copyright (C) 1995 Software Foundation, Inc.
+ Copyright (C) 1995, 2000-2003 Software Foundation, Inc.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
-#include "libgettext.h"
+#include "gettextP.h"
/* @@ end of prolog @@ */
+/* This file redirects the gettext functions (without prefix) to those
+ defined in the included GNU libintl library (with "libintl_" prefix).
+ It is compiled into libintl in order to make the AM_GNU_GETTEXT test
+ of gettext <= 0.11.2 work with the libintl library >= 0.11.3 which
+ has the redirections primarily in the <libintl.h> include file.
+ It is also compiled into libgnuintl so that libgnuintl.so can be used
+ as LD_PRELOADable library on glibc systems, to provide the extra
+ features that the functions in the libc don't have (namely, logging). */
+
#undef gettext
#undef dgettext
#undef dcgettext
+#undef ngettext
+#undef dngettext
+#undef dcngettext
#undef textdomain
#undef bindtextdomain
+#undef bind_textdomain_codeset
+
+/* When building a DLL, we must export some functions. Note that because
+ the functions are only defined for binary backward compatibility, we
+ don't need to use __declspec(dllimport) in any case. */
+#if defined _MSC_VER && BUILDING_DLL
+# define DLL_EXPORTED __declspec(dllexport)
+#else
+# define DLL_EXPORTED
+#endif
+
+DLL_EXPORTED
char *
-bindtextdomain (domainname, dirname)
+gettext (msgid)
+ const char *msgid;
+{
+ return libintl_gettext (msgid);
+}
+
+
+DLL_EXPORTED
+char *
+dgettext (domainname, msgid)
const char *domainname;
- const char *dirname;
+ const char *msgid;
{
- return bindtextdomain__ (domainname, dirname);
+ return libintl_dgettext (domainname, msgid);
}
+DLL_EXPORTED
char *
dcgettext (domainname, msgid, category)
const char *domainname;
const char *msgid;
int category;
{
- return dcgettext__ (domainname, msgid, category);
+ return libintl_dcgettext (domainname, msgid, category);
}
+DLL_EXPORTED
char *
-dgettext (domainname, msgid)
+ngettext (msgid1, msgid2, n)
+ const char *msgid1;
+ const char *msgid2;
+ unsigned long int n;
+{
+ return libintl_ngettext (msgid1, msgid2, n);
+}
+
+
+DLL_EXPORTED
+char *
+dngettext (domainname, msgid1, msgid2, n)
const char *domainname;
- const char *msgid;
+ const char *msgid1;
+ const char *msgid2;
+ unsigned long int n;
{
- return dgettext__ (domainname, msgid);
+ return libintl_dngettext (domainname, msgid1, msgid2, n);
}
+DLL_EXPORTED
char *
-gettext (msgid)
- const char *msgid;
+dcngettext (domainname, msgid1, msgid2, n, category)
+ const char *domainname;
+ const char *msgid1;
+ const char *msgid2;
+ unsigned long int n;
+ int category;
{
- return gettext__ (msgid);
+ return libintl_dcngettext (domainname, msgid1, msgid2, n, category);
}
+DLL_EXPORTED
char *
textdomain (domainname)
const char *domainname;
{
- return textdomain__ (domainname);
+ return libintl_textdomain (domainname);
+}
+
+
+DLL_EXPORTED
+char *
+bindtextdomain (domainname, dirname)
+ const char *domainname;
+ const char *dirname;
+{
+ return libintl_bindtextdomain (domainname, dirname);
+}
+
+
+DLL_EXPORTED
+char *
+bind_textdomain_codeset (domainname, codeset)
+ const char *domainname;
+ const char *codeset;
+{
+ return libintl_bind_textdomain_codeset (domainname, codeset);
}
-/* Handle list of needed message catalogs
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
- Written by Ulrich Drepper <drepper@gnu.org>, 1995.
+/* Copyright (C) 1995-1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+ Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* Tell glibc's <string.h> to provide a prototype for stpcpy().
+ This must come before <config.h> because <config.h> may include
+ <features.h>, and once <features.h> has been included, it's too late. */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE 1
+#endif
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
-
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-# define _GNU_SOURCE 1
-# endif
-# include <string.h>
-#else
-# include <strings.h>
-# ifndef memcpy
-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-# define strchr index
-# endif
-#endif
+#include <string.h>
#if defined _LIBC || defined HAVE_ARGZ_H
# include <argz.h>
#endif
#include <ctype.h>
#include <sys/types.h>
-
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
+#include <stdlib.h>
#include "loadinfo.h"
/* Rename the non ANSI C functions. This is required by the standard
because some ANSI C functions will require linking with this object
file and the name space must not be polluted. */
-# define stpcpy(dest, src) __stpcpy(dest, src)
+# ifndef stpcpy
+# define stpcpy(dest, src) __stpcpy(dest, src)
+# endif
#else
# ifndef HAVE_STPCPY
static char *stpcpy PARAMS ((char *dest, const char *src));
# endif
#endif
+/* Pathname support.
+ ISSLASH(C) tests whether C is a directory separator character.
+ IS_ABSOLUTE_PATH(P) tests whether P is an absolute path. If it is not,
+ it may be concatenated to a directory pathname.
+ */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+ /* Win32, OS/2, DOS */
+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
+# define HAS_DEVICE(P) \
+ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
+ && (P)[1] == ':')
+# define IS_ABSOLUTE_PATH(P) (ISSLASH ((P)[0]) || HAS_DEVICE (P))
+#else
+ /* Unix */
+# define ISSLASH(C) ((C) == '/')
+# define IS_ABSOLUTE_PATH(P) ISSLASH ((P)[0])
+#endif
+
/* Define function which are usually not available. */
#if !defined _LIBC && !defined HAVE___ARGZ_COUNT
}
# undef __argz_count
# define __argz_count(argz, len) argz_count__ (argz, len)
+#else
+# ifdef _LIBC
+# define __argz_count(argz, len) INTUSE(__argz_count) (argz, len)
+# endif
#endif /* !_LIBC && !HAVE___ARGZ_COUNT */
#if !defined _LIBC && !defined HAVE___ARGZ_STRINGIFY
}
# undef __argz_stringify
# define __argz_stringify(argz, len, sep) argz_stringify__ (argz, len, sep)
+#else
+# ifdef _LIBC
+# define __argz_stringify(argz, len, sep) \
+ INTUSE(__argz_stringify) (argz, len, sep)
+# endif
#endif /* !_LIBC && !HAVE___ARGZ_STRINGIFY */
#if !defined _LIBC && !defined HAVE___ARGZ_NEXT
int do_allocate;
{
char *abs_filename;
- struct loaded_l10nfile *last = NULL;
+ struct loaded_l10nfile **lastp;
struct loaded_l10nfile *retval;
char *cp;
+ size_t dirlist_count;
size_t entries;
int cnt;
+ /* If LANGUAGE contains an absolute directory specification, we ignore
+ DIRLIST. */
+ if (IS_ABSOLUTE_PATH (language))
+ dirlist_len = 0;
+
/* Allocate room for the full file name. */
abs_filename = (char *) malloc (dirlist_len
+ strlen (language)
+ (((mask & CEN_SPONSOR) != 0
|| (mask & CEN_REVISION) != 0)
? (1 + ((mask & CEN_SPONSOR) != 0
- ? strlen (sponsor) + 1 : 0)
+ ? strlen (sponsor) : 0)
+ ((mask & CEN_REVISION) != 0
? strlen (revision) + 1 : 0)) : 0)
+ 1 + strlen (filename) + 1);
if (abs_filename == NULL)
return NULL;
- retval = NULL;
- last = NULL;
-
/* Construct file name. */
- memcpy (abs_filename, dirlist, dirlist_len);
- __argz_stringify (abs_filename, dirlist_len, ':');
- cp = abs_filename + (dirlist_len - 1);
- *cp++ = '/';
+ cp = abs_filename;
+ if (dirlist_len > 0)
+ {
+ memcpy (cp, dirlist, dirlist_len);
+ __argz_stringify (cp, dirlist_len, PATH_SEPARATOR);
+ cp += dirlist_len;
+ cp[-1] = '/';
+ }
+
cp = stpcpy (cp, language);
if ((mask & TERRITORY) != 0)
/* Look in list of already loaded domains whether it is already
available. */
- last = NULL;
+ lastp = l10nfile_list;
for (retval = *l10nfile_list; retval != NULL; retval = retval->next)
if (retval->filename != NULL)
{
break;
}
- last = retval;
+ lastp = &retval->next;
}
if (retval != NULL || do_allocate == 0)
return retval;
}
- retval = (struct loaded_l10nfile *)
- malloc (sizeof (*retval) + (__argz_count (dirlist, dirlist_len)
- * (1 << pop (mask))
- * sizeof (struct loaded_l10nfile *)));
+ dirlist_count = (dirlist_len > 0 ? __argz_count (dirlist, dirlist_len) : 1);
+
+ /* Allocate a new loaded_l10nfile. */
+ retval =
+ (struct loaded_l10nfile *)
+ malloc (sizeof (*retval)
+ + (((dirlist_count << pop (mask)) + (dirlist_count > 1 ? 1 : 0))
+ * sizeof (struct loaded_l10nfile *)));
if (retval == NULL)
return NULL;
retval->filename = abs_filename;
- retval->decided = (__argz_count (dirlist, dirlist_len) != 1
+
+ /* We set retval->data to NULL here; it is filled in later.
+ Setting retval->decided to 1 here means that retval does not
+ correspond to a real file (dirlist_count > 1) or is not worth
+ looking up (if an unnormalized codeset was specified). */
+ retval->decided = (dirlist_count > 1
|| ((mask & XPG_CODESET) != 0
&& (mask & XPG_NORM_CODESET) != 0));
retval->data = NULL;
- if (last == NULL)
- {
- retval->next = *l10nfile_list;
- *l10nfile_list = retval;
- }
- else
- {
- retval->next = last->next;
- last->next = retval;
- }
+ retval->next = *lastp;
+ *lastp = retval;
entries = 0;
- /* If the DIRLIST is a real list the RETVAL entry corresponds not to
- a real file. So we have to use the DIRLIST separation mechanism
- of the inner loop. */
- cnt = __argz_count (dirlist, dirlist_len) == 1 ? mask - 1 : mask;
- for (; cnt >= 0; --cnt)
+ /* Recurse to fill the inheritance list of RETVAL.
+ If the DIRLIST is a real list (i.e. DIRLIST_COUNT > 1), the RETVAL
+ entry does not correspond to a real file; retval->filename contains
+ colons. In this case we loop across all elements of DIRLIST and
+ across all bit patterns dominated by MASK.
+ If the DIRLIST is a single directory or entirely redundant (i.e.
+ DIRLIST_COUNT == 1), we loop across all bit patterns dominated by
+ MASK, excluding MASK itself.
+ In either case, we loop down from MASK to 0. This has the effect
+ that the extra bits in the locale name are dropped in this order:
+ first the modifier, then the territory, then the codeset, then the
+ normalized_codeset. */
+ for (cnt = dirlist_count > 1 ? mask : mask - 1; cnt >= 0; --cnt)
if ((cnt & ~mask) == 0
&& ((cnt & CEN_SPECIFIC) == 0 || (cnt & XPG_SPECIFIC) == 0)
&& ((cnt & XPG_CODESET) == 0 || (cnt & XPG_NORM_CODESET) == 0))
{
- /* Iterate over all elements of the DIRLIST. */
- char *dir = NULL;
-
- while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir))
- != NULL)
+ if (dirlist_count > 1)
+ {
+ /* Iterate over all elements of the DIRLIST. */
+ char *dir = NULL;
+
+ while ((dir = __argz_next ((char *) dirlist, dirlist_len, dir))
+ != NULL)
+ retval->successor[entries++]
+ = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1,
+ cnt, language, territory, codeset,
+ normalized_codeset, modifier, special,
+ sponsor, revision, filename, 1);
+ }
+ else
retval->successor[entries++]
- = _nl_make_l10nflist (l10nfile_list, dir, strlen (dir) + 1, cnt,
- language, territory, codeset,
+ = _nl_make_l10nflist (l10nfile_list, dirlist, dirlist_len,
+ cnt, language, territory, codeset,
normalized_codeset, modifier, special,
sponsor, revision, filename, 1);
}
\f
/* Normalize codeset name. There is no standard for the codeset
names. Normalization allows the user to use any of the common
- names. */
+ names. The return value is dynamically allocated and has to be
+ freed by the caller. */
const char *
_nl_normalize_codeset (codeset, name_len)
const char *codeset;
size_t cnt;
for (cnt = 0; cnt < name_len; ++cnt)
- if (isalnum (codeset[cnt]))
+ if (isalnum ((unsigned char) codeset[cnt]))
{
++len;
- if (isalpha (codeset[cnt]))
+ if (isalpha ((unsigned char) codeset[cnt]))
only_digit = 0;
}
wp = retval;
for (cnt = 0; cnt < name_len; ++cnt)
- if (isalpha (codeset[cnt]))
- *wp++ = tolower (codeset[cnt]);
- else if (isdigit (codeset[cnt]))
+ if (isalpha ((unsigned char) codeset[cnt]))
+ *wp++ = tolower ((unsigned char) codeset[cnt]);
+ else if (isdigit ((unsigned char) codeset[cnt]))
*wp++ = codeset[cnt];
*wp = '\0';
+++ /dev/null
-/* Message catalogs for internationalization.
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-/* Because on some systems (e.g. Solaris) we sometimes have to include
- the systems libintl.h as well as this file we have more complex
- include protection above. But the systems header might perhaps also
- define _LIBINTL_H and therefore we have to protect the definition here. */
-
-#if !defined (_LIBINTL_H) || !defined (_LIBGETTEXT_H)
-#if !defined (_LIBINTL_H)
-# define _LIBINTL_H 1
-#endif
-#define _LIBGETTEXT_H 1
-
-/* We define an additional symbol to signal that we use the GNU
- implementation of gettext. */
-#define __USE_GNU_GETTEXT 1
-
-#include <sys/types.h>
-
-#if HAVE_LOCALE_H
-# include <locale.h>
-#endif
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* @@ end of prolog @@ */
-
-#ifndef PARAMS
-# if __STDC__
-# define PARAMS(args) args
-# else
-# define PARAMS(args) ()
-# endif
-#endif
-
-#ifndef NULL
-# if !defined __cplusplus || defined __GNUC__
-# define NULL ((void *) 0)
-# else
-# define NULL (0)
-# endif
-#endif
-
-#if !HAVE_LC_MESSAGES
-/* This value determines the behaviour of the gettext() and dgettext()
- function. But some system does not have this defined. Define it
- to a default value. */
-# define LC_MESSAGES (-1)
-#endif
-
-
-/* Declarations for gettext-using-catgets interface. Derived from
- Jim Meyering's libintl.h. */
-struct _msg_ent
-{
- const char *_msg;
- int _msg_number;
-};
-
-
-#if HAVE_CATGETS
-/* These two variables are defined in the automatically by po-to-tbl.sed
- generated file `cat-id-tbl.c'. */
-extern const struct _msg_ent _msg_tbl[];
-extern int _msg_tbl_length;
-#endif
-
-
-/* For automatical extraction of messages sometimes no real
- translation is needed. Instead the string itself is the result. */
-#define gettext_noop(Str) (Str)
-
-/* Look up MSGID in the current default message catalog for the current
- LC_MESSAGES locale. If not found, returns MSGID itself (the default
- text). */
-extern char *gettext PARAMS ((const char *__msgid));
-extern char *gettext__ PARAMS ((const char *__msgid));
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current
- LC_MESSAGES locale. */
-extern char *dgettext PARAMS ((const char *__domainname, const char *__msgid));
-extern char *dgettext__ PARAMS ((const char *__domainname,
- const char *__msgid));
-
-/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
- locale. */
-extern char *dcgettext PARAMS ((const char *__domainname, const char *__msgid,
- int __category));
-extern char *dcgettext__ PARAMS ((const char *__domainname,
- const char *__msgid, int __category));
-
-
-/* Set the current default message catalog to DOMAINNAME.
- If DOMAINNAME is null, return the current default.
- If DOMAINNAME is "", reset to the default of "messages". */
-extern char *textdomain PARAMS ((const char *__domainname));
-extern char *textdomain__ PARAMS ((const char *__domainname));
-
-/* Specify that the DOMAINNAME message catalog will be found
- in DIRNAME rather than in the system locale data base. */
-extern char *bindtextdomain PARAMS ((const char *__domainname,
- const char *__dirname));
-extern char *bindtextdomain__ PARAMS ((const char *__domainname,
- const char *__dirname));
-
-#if ENABLE_NLS
-
-/* Solaris 2.3 has the gettext function but dcgettext is missing.
- So we omit this optimization for Solaris 2.3. BTW, Solaris 2.4
- has dcgettext. */
-# if !HAVE_CATGETS && (!HAVE_GETTEXT || HAVE_DCGETTEXT)
-
-# define gettext(Msgid) \
- dgettext (NULL, Msgid)
-
-# define dgettext(Domainname, Msgid) \
- dcgettext (Domainname, Msgid, LC_MESSAGES)
-
-# if defined __GNUC__ && __GNUC__ == 2 && __GNUC_MINOR__ >= 7
-/* This global variable is defined in loadmsgcat.c. We need a sign,
- whether a new catalog was loaded, which can be associated with all
- translations. */
-extern int _nl_msg_cat_cntr;
-
-# define dcgettext(Domainname, Msgid, Category) \
- (__extension__ \
- ({ \
- char *__result; \
- if (__builtin_constant_p (Msgid)) \
- { \
- static char *__translation__; \
- static int __catalog_counter__; \
- if (! __translation__ || __catalog_counter__ != _nl_msg_cat_cntr) \
- { \
- __translation__ = \
- dcgettext__ (Domainname, Msgid, Category); \
- __catalog_counter__ = _nl_msg_cat_cntr; \
- } \
- __result = __translation__; \
- } \
- else \
- __result = dcgettext__ (Domainname, Msgid, Category); \
- __result; \
- }))
-# endif
-# endif
-
-#else
-
-# define gettext(Msgid) (Msgid)
-# define dgettext(Domainname, Msgid) (Msgid)
-# define dcgettext(Domainname, Msgid, Category) (Msgid)
-# define textdomain(Domainname) while (0) /* nothing */
-# define bindtextdomain(Domainname, Dirname) while (0) /* nothing */
-
-#endif
-
-/* @@ begin of epilog @@ */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- /dev/null
+/* Message catalogs for internationalization.
+ Copyright (C) 1995-1997, 2000-2003 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _LIBINTL_H
+#define _LIBINTL_H 1
+
+#include <locale.h>
+
+/* The LC_MESSAGES locale category is the category used by the functions
+ gettext() and dgettext(). It is specified in POSIX, but not in ANSI C.
+ On systems that don't define it, use an arbitrary value instead.
+ On Solaris, <locale.h> defines __LOCALE_H (or _LOCALE_H in Solaris 2.5)
+ then includes <libintl.h> (i.e. this file!) and then only defines
+ LC_MESSAGES. To avoid a redefinition warning, don't define LC_MESSAGES
+ in this case. */
+#if !defined LC_MESSAGES && !(defined __LOCALE_H || (defined _LOCALE_H && defined __sun))
+# define LC_MESSAGES 1729
+#endif
+
+/* We define an additional symbol to signal that we use the GNU
+ implementation of gettext. */
+#define __USE_GNU_GETTEXT 1
+
+/* Provide information about the supported file formats. Returns the
+ maximum minor revision number supported for a given major revision. */
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) \
+ ((major) == 0 ? 1 : -1)
+
+/* Resolve a platform specific conflict on DJGPP. GNU gettext takes
+ precedence over _conio_gettext. */
+#ifdef __DJGPP__
+# undef gettext
+#endif
+
+/* Use _INTL_PARAMS, not PARAMS, in order to avoid clashes with identifiers
+ used by programs. Similarly, test __PROTOTYPES, not PROTOTYPES. */
+#ifndef _INTL_PARAMS
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
+# define _INTL_PARAMS(args) args
+# else
+# define _INTL_PARAMS(args) ()
+# endif
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* We redirect the functions to those prefixed with "libintl_". This is
+ necessary, because some systems define gettext/textdomain/... in the C
+ library (namely, Solaris 2.4 and newer, and GNU libc 2.0 and newer).
+ If we used the unprefixed names, there would be cases where the
+ definition in the C library would override the one in the libintl.so
+ shared library. Recall that on ELF systems, the symbols are looked
+ up in the following order:
+ 1. in the executable,
+ 2. in the shared libraries specified on the link command line, in order,
+ 3. in the dependencies of the shared libraries specified on the link
+ command line,
+ 4. in the dlopen()ed shared libraries, in the order in which they were
+ dlopen()ed.
+ The definition in the C library would override the one in libintl.so if
+ either
+ * -lc is given on the link command line and -lintl isn't, or
+ * -lc is given on the link command line before -lintl, or
+ * libintl.so is a dependency of a dlopen()ed shared library but not
+ linked to the executable at link time.
+ Since Solaris gettext() behaves differently than GNU gettext(), this
+ would be unacceptable.
+
+ The redirection happens by default through macros in C, so that &gettext
+ is independent of the compilation unit, but through inline functions in
+ C++, in order not to interfere with the name mangling of class fields or
+ class methods called 'gettext'. */
+
+/* The user can define _INTL_REDIRECT_INLINE or _INTL_REDIRECT_MACROS.
+ If he doesn't, we choose the method. A third possible method is
+ _INTL_REDIRECT_ASM, supported only by GCC. */
+#if !(defined _INTL_REDIRECT_INLINE || defined _INTL_REDIRECT_MACROS)
+# if __GNUC__ >= 2 && !defined __APPLE_CC__ && (defined __STDC__ || defined __cplusplus)
+# define _INTL_REDIRECT_ASM
+# else
+# ifdef __cplusplus
+# define _INTL_REDIRECT_INLINE
+# else
+# define _INTL_REDIRECT_MACROS
+# endif
+# endif
+#endif
+/* Auxiliary macros. */
+#ifdef _INTL_REDIRECT_ASM
+# define _INTL_ASM(cname) __asm__ (_INTL_ASMNAME (__USER_LABEL_PREFIX__, #cname))
+# define _INTL_ASMNAME(prefix,cnamestring) _INTL_STRINGIFY (prefix) cnamestring
+# define _INTL_STRINGIFY(prefix) #prefix
+#else
+# define _INTL_ASM(cname)
+#endif
+
+/* Look up MSGID in the current default message catalog for the current
+ LC_MESSAGES locale. If not found, returns MSGID itself (the default
+ text). */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_gettext (const char *__msgid);
+static inline char *gettext (const char *__msgid)
+{
+ return libintl_gettext (__msgid);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define gettext libintl_gettext
+#endif
+extern char *gettext _INTL_PARAMS ((const char *__msgid))
+ _INTL_ASM (libintl_gettext);
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current
+ LC_MESSAGES locale. */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_dgettext (const char *__domainname, const char *__msgid);
+static inline char *dgettext (const char *__domainname, const char *__msgid)
+{
+ return libintl_dgettext (__domainname, __msgid);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define dgettext libintl_dgettext
+#endif
+extern char *dgettext _INTL_PARAMS ((const char *__domainname,
+ const char *__msgid))
+ _INTL_ASM (libintl_dgettext);
+#endif
+
+/* Look up MSGID in the DOMAINNAME message catalog for the current CATEGORY
+ locale. */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_dcgettext (const char *__domainname, const char *__msgid,
+ int __category);
+static inline char *dcgettext (const char *__domainname, const char *__msgid,
+ int __category)
+{
+ return libintl_dcgettext (__domainname, __msgid, __category);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define dcgettext libintl_dcgettext
+#endif
+extern char *dcgettext _INTL_PARAMS ((const char *__domainname,
+ const char *__msgid,
+ int __category))
+ _INTL_ASM (libintl_dcgettext);
+#endif
+
+
+/* Similar to `gettext' but select the plural form corresponding to the
+ number N. */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_ngettext (const char *__msgid1, const char *__msgid2,
+ unsigned long int __n);
+static inline char *ngettext (const char *__msgid1, const char *__msgid2,
+ unsigned long int __n)
+{
+ return libintl_ngettext (__msgid1, __msgid2, __n);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define ngettext libintl_ngettext
+#endif
+extern char *ngettext _INTL_PARAMS ((const char *__msgid1,
+ const char *__msgid2,
+ unsigned long int __n))
+ _INTL_ASM (libintl_ngettext);
+#endif
+
+/* Similar to `dgettext' but select the plural form corresponding to the
+ number N. */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_dngettext (const char *__domainname, const char *__msgid1,
+ const char *__msgid2, unsigned long int __n);
+static inline char *dngettext (const char *__domainname, const char *__msgid1,
+ const char *__msgid2, unsigned long int __n)
+{
+ return libintl_dngettext (__domainname, __msgid1, __msgid2, __n);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define dngettext libintl_dngettext
+#endif
+extern char *dngettext _INTL_PARAMS ((const char *__domainname,
+ const char *__msgid1,
+ const char *__msgid2,
+ unsigned long int __n))
+ _INTL_ASM (libintl_dngettext);
+#endif
+
+/* Similar to `dcgettext' but select the plural form corresponding to the
+ number N. */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_dcngettext (const char *__domainname,
+ const char *__msgid1, const char *__msgid2,
+ unsigned long int __n, int __category);
+static inline char *dcngettext (const char *__domainname,
+ const char *__msgid1, const char *__msgid2,
+ unsigned long int __n, int __category)
+{
+ return libintl_dcngettext (__domainname, __msgid1, __msgid2, __n, __category);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define dcngettext libintl_dcngettext
+#endif
+extern char *dcngettext _INTL_PARAMS ((const char *__domainname,
+ const char *__msgid1,
+ const char *__msgid2,
+ unsigned long int __n,
+ int __category))
+ _INTL_ASM (libintl_dcngettext);
+#endif
+
+
+/* Set the current default message catalog to DOMAINNAME.
+ If DOMAINNAME is null, return the current default.
+ If DOMAINNAME is "", reset to the default of "messages". */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_textdomain (const char *__domainname);
+static inline char *textdomain (const char *__domainname)
+{
+ return libintl_textdomain (__domainname);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define textdomain libintl_textdomain
+#endif
+extern char *textdomain _INTL_PARAMS ((const char *__domainname))
+ _INTL_ASM (libintl_textdomain);
+#endif
+
+/* Specify that the DOMAINNAME message catalog will be found
+ in DIRNAME rather than in the system locale data base. */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_bindtextdomain (const char *__domainname,
+ const char *__dirname);
+static inline char *bindtextdomain (const char *__domainname,
+ const char *__dirname)
+{
+ return libintl_bindtextdomain (__domainname, __dirname);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define bindtextdomain libintl_bindtextdomain
+#endif
+extern char *bindtextdomain _INTL_PARAMS ((const char *__domainname,
+ const char *__dirname))
+ _INTL_ASM (libintl_bindtextdomain);
+#endif
+
+/* Specify the character encoding in which the messages from the
+ DOMAINNAME message catalog will be returned. */
+#ifdef _INTL_REDIRECT_INLINE
+extern char *libintl_bind_textdomain_codeset (const char *__domainname,
+ const char *__codeset);
+static inline char *bind_textdomain_codeset (const char *__domainname,
+ const char *__codeset)
+{
+ return libintl_bind_textdomain_codeset (__domainname, __codeset);
+}
+#else
+#ifdef _INTL_REDIRECT_MACROS
+# define bind_textdomain_codeset libintl_bind_textdomain_codeset
+#endif
+extern char *bind_textdomain_codeset _INTL_PARAMS ((const char *__domainname,
+ const char *__codeset))
+ _INTL_ASM (libintl_bind_textdomain_codeset);
+#endif
+
+
+/* Support for relocatable packages. */
+
+/* Sets the original and the current installation prefix of the package.
+ Relocation simply replaces a pathname starting with the original prefix
+ by the corresponding pathname with the current prefix instead. Both
+ prefixes should be directory names without trailing slash (i.e. use ""
+ instead of "/"). */
+#define libintl_set_relocation_prefix libintl_set_relocation_prefix
+extern void
+ libintl_set_relocation_prefix _INTL_PARAMS ((const char *orig_prefix,
+ const char *curr_prefix));
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* libintl.h */
+++ /dev/null
-# po2msg.sed - Convert Uniforum style .po file to Linux style .msg file
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.org>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-#
-# The first directive in the .msg should be the definition of the
-# message set number. We use always set number 1.
-#
-1 {
- i\
-$set 1 # Automatically created by po2msg.sed
- h
- s/.*/0/
- x
-}
-#
-# Mitch's old catalog format does not allow comments.
-#
-# We copy the original message as a comment into the .msg file.
-#
-/^msgid/ {
- s/msgid[ ]*"//
-#
-# This does not work now with the new format.
-# /"$/! {
-# s/\\$//
-# s/$/ ... (more lines following)"/
-# }
- x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
- td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
- :d
- s/9\(_*\)$/_\1/
- td
-# Assure at least one digit is available.
- s/^\(_*\)$/0\1/
-# Increment the last digit.
- s/8\(_*\)$/9\1/
- s/7\(_*\)$/8\1/
- s/6\(_*\)$/7\1/
- s/5\(_*\)$/6\1/
- s/4\(_*\)$/5\1/
- s/3\(_*\)$/4\1/
- s/2\(_*\)$/3\1/
- s/1\(_*\)$/2\1/
- s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
- s/_/0/g
- x
- G
- s/\(.*\)"\n\([0-9]*\)/$ #\2 Original Message:(\1)/p
-}
-#
-# The .msg file contains, other then the .po file, only the translations
-# but each given a unique ID. Starting from 1 and incrementing by 1 for
-# each message we assign them to the messages.
-# It is important that the .po file used to generate the cat-id-tbl.c file
-# (with po-to-tbl) is the same as the one used here. (At least the order
-# of declarations must not be changed.)
-#
-/^msgstr/ {
- s/msgstr[ ]*"\(.*\)"/# \1/
-# Clear substitution flag.
- tb
-# Append the next line.
- :b
- N
-# Look whether second part is continuation line.
- s/\(.*\n\)"\(.*\)"/\1\2/
-# Yes, then branch.
- ta
- P
- D
-# Note that D includes a jump to the start!!
-# We found a continuation line. But before printing insert '\'.
- :a
- s/\(.*\)\(\n.*\)/\1\\\2/
- P
-# We cannot use D here.
- s/.*\n\(.*\)/\1/
- tb
-}
-d
+/* Copyright (C) 1996-1999, 2000-2002 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+ Contributed by Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _LOADINFO_H
+#define _LOADINFO_H 1
+
+/* Declarations of locale dependent catalog lookup functions.
+ Implemented in
+
+ localealias.c Possibly replace a locale name by another.
+ explodename.c Split a locale name into its various fields.
+ l10nflist.c Generate a list of filenames of possible message catalogs.
+ finddomain.c Find and open the relevant message catalogs.
+
+ The main function _nl_find_domain() in finddomain.c is declared
+ in gettextP.h.
+ */
+
#ifndef PARAMS
-# if __STDC__
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
# define PARAMS(args) args
# else
# define PARAMS(args) ()
# endif
#endif
+#ifndef internal_function
+# define internal_function
+#endif
+
+/* Tell the compiler when a conditional or integer expression is
+ almost always true or almost always false. */
+#ifndef HAVE_BUILTIN_EXPECT
+# define __builtin_expect(expr, val) (expr)
+#endif
+
+/* Separator in PATH like lists of pathnames. */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+ /* Win32, OS/2, DOS */
+# define PATH_SEPARATOR ';'
+#else
+ /* Unix */
+# define PATH_SEPARATOR ':'
+#endif
+
/* Encoding of locale name parts. */
#define CEN_REVISION 1
#define CEN_SPONSOR 2
};
+/* Normalize codeset name. There is no standard for the codeset
+ names. Normalization allows the user to use any of the common
+ names. The return value is dynamically allocated and has to be
+ freed by the caller. */
extern const char *_nl_normalize_codeset PARAMS ((const char *codeset,
size_t name_len));
+/* Lookup a locale dependent file.
+ *L10NFILE_LIST denotes a pool of lookup results of locale dependent
+ files of the same kind, sorted in decreasing order of ->filename.
+ DIRLIST and DIRLIST_LEN are an argz list of directories in which to
+ look, containing at least one directory (i.e. DIRLIST_LEN > 0).
+ MASK, LANGUAGE, TERRITORY, CODESET, NORMALIZED_CODESET, MODIFIER,
+ SPECIAL, SPONSOR, REVISION are the pieces of the locale name, as
+ produced by _nl_explode_name(). FILENAME is the filename suffix.
+ The return value is the lookup result, either found in *L10NFILE_LIST,
+ or - if DO_ALLOCATE is nonzero - freshly allocated, or possibly NULL.
+ If the return value is non-NULL, it is added to *L10NFILE_LIST, and
+ its ->next field denotes the chaining inside *L10NFILE_LIST, and
+ furthermore its ->successor[] field contains a list of other lookup
+ results from which this lookup result inherits. */
extern struct loaded_l10nfile *
_nl_make_l10nflist PARAMS ((struct loaded_l10nfile **l10nfile_list,
const char *dirlist, size_t dirlist_len, int mask,
const char *sponsor, const char *revision,
const char *filename, int do_allocate));
-
+/* Lookup the real locale name for a locale alias NAME, or NULL if
+ NAME is not a locale alias (but possibly a real locale name).
+ The return value is statically allocated and must not be freed. */
extern const char *_nl_expand_alias PARAMS ((const char *name));
+/* Split a locale name NAME into its pieces: language, modifier,
+ territory, codeset, special, sponsor, revision.
+ NAME gets destructively modified: NUL bytes are inserted here and
+ there. *LANGUAGE gets assigned NAME. Each of *MODIFIER, *TERRITORY,
+ *CODESET, *SPECIAL, *SPONSOR, *REVISION gets assigned either a
+ pointer into the old NAME string, or NULL. *NORMALIZED_CODESET
+ gets assigned the expanded *CODESET, if it is different from *CODESET;
+ this one is dynamically allocated and has to be freed by the caller.
+ The return value is a bitmask, where each bit corresponds to one
+ filled-in value:
+ XPG_MODIFIER, CEN_AUDIENCE for *MODIFIER,
+ TERRITORY for *TERRITORY,
+ XPG_CODESET for *CODESET,
+ XPG_NORM_CODESET for *NORMALIZED_CODESET,
+ CEN_SPECIAL for *SPECIAL,
+ CEN_SPONSOR for *SPONSOR,
+ CEN_REVISION for *REVISION.
+ */
extern int _nl_explode_name PARAMS ((char *name, const char **language,
const char **modifier,
const char **territory,
const char **special,
const char **sponsor,
const char **revision));
+
+/* Split a locale name NAME into a leading language part and all the
+ rest. Return a pointer to the first character after the language,
+ i.e. to the first byte of the rest. */
+extern char *_nl_find_language PARAMS ((const char *name));
+
+#endif /* loadinfo.h */
-/* Load needed message catalogs
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
+/* Load needed message catalogs.
+ Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
+ This must come before <config.h> because <config.h> may include
+ <features.h>, and once <features.h> has been included, it's too late. */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE 1
+#endif
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
+#include <ctype.h>
+#include <errno.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
+#ifdef __GNUC__
+# undef alloca
+# define alloca __builtin_alloca
+# define HAVE_ALLOCA 1
+#else
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
+# else
+# if defined HAVE_ALLOCA_H || defined _LIBC
+# include <alloca.h>
+# else
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca
+char *alloca ();
+# endif
+# endif
+# endif
+# endif
#endif
+#include <stdlib.h>
+#include <string.h>
+
#if defined HAVE_UNISTD_H || defined _LIBC
# include <unistd.h>
#endif
-#if (defined HAVE_MMAP && defined HAVE_MUNMAP) || defined _LIBC
+#ifdef _LIBC
+# include <langinfo.h>
+# include <locale.h>
+#endif
+
+#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
+ || (defined _LIBC && defined _POSIX_MAPPED_FILES)
# include <sys/mman.h>
+# undef HAVE_MMAP
+# define HAVE_MMAP 1
+#else
+# undef HAVE_MMAP
#endif
-#include "gettext.h"
+#if defined HAVE_STDINT_H_WITH_UINTMAX || defined _LIBC
+# include <stdint.h>
+#endif
+#if defined HAVE_INTTYPES_H || defined _LIBC
+# include <inttypes.h>
+#endif
+
+#include "gmo.h"
#include "gettextP.h"
+#include "hash-string.h"
+#include "plural-exp.h"
+
+#ifdef _LIBC
+# include "../locale/localeinfo.h"
+#endif
+
+/* Provide fallback values for macros that ought to be defined in <inttypes.h>.
+ Note that our fallback values need not be literal strings, because we don't
+ use them with preprocessor string concatenation. */
+#if !defined PRId8 || PRI_MACROS_BROKEN
+# undef PRId8
+# define PRId8 "d"
+#endif
+#if !defined PRIi8 || PRI_MACROS_BROKEN
+# undef PRIi8
+# define PRIi8 "i"
+#endif
+#if !defined PRIo8 || PRI_MACROS_BROKEN
+# undef PRIo8
+# define PRIo8 "o"
+#endif
+#if !defined PRIu8 || PRI_MACROS_BROKEN
+# undef PRIu8
+# define PRIu8 "u"
+#endif
+#if !defined PRIx8 || PRI_MACROS_BROKEN
+# undef PRIx8
+# define PRIx8 "x"
+#endif
+#if !defined PRIX8 || PRI_MACROS_BROKEN
+# undef PRIX8
+# define PRIX8 "X"
+#endif
+#if !defined PRId16 || PRI_MACROS_BROKEN
+# undef PRId16
+# define PRId16 "d"
+#endif
+#if !defined PRIi16 || PRI_MACROS_BROKEN
+# undef PRIi16
+# define PRIi16 "i"
+#endif
+#if !defined PRIo16 || PRI_MACROS_BROKEN
+# undef PRIo16
+# define PRIo16 "o"
+#endif
+#if !defined PRIu16 || PRI_MACROS_BROKEN
+# undef PRIu16
+# define PRIu16 "u"
+#endif
+#if !defined PRIx16 || PRI_MACROS_BROKEN
+# undef PRIx16
+# define PRIx16 "x"
+#endif
+#if !defined PRIX16 || PRI_MACROS_BROKEN
+# undef PRIX16
+# define PRIX16 "X"
+#endif
+#if !defined PRId32 || PRI_MACROS_BROKEN
+# undef PRId32
+# define PRId32 "d"
+#endif
+#if !defined PRIi32 || PRI_MACROS_BROKEN
+# undef PRIi32
+# define PRIi32 "i"
+#endif
+#if !defined PRIo32 || PRI_MACROS_BROKEN
+# undef PRIo32
+# define PRIo32 "o"
+#endif
+#if !defined PRIu32 || PRI_MACROS_BROKEN
+# undef PRIu32
+# define PRIu32 "u"
+#endif
+#if !defined PRIx32 || PRI_MACROS_BROKEN
+# undef PRIx32
+# define PRIx32 "x"
+#endif
+#if !defined PRIX32 || PRI_MACROS_BROKEN
+# undef PRIX32
+# define PRIX32 "X"
+#endif
+#if !defined PRId64 || PRI_MACROS_BROKEN
+# undef PRId64
+# define PRId64 (sizeof (long) == 8 ? "ld" : "lld")
+#endif
+#if !defined PRIi64 || PRI_MACROS_BROKEN
+# undef PRIi64
+# define PRIi64 (sizeof (long) == 8 ? "li" : "lli")
+#endif
+#if !defined PRIo64 || PRI_MACROS_BROKEN
+# undef PRIo64
+# define PRIo64 (sizeof (long) == 8 ? "lo" : "llo")
+#endif
+#if !defined PRIu64 || PRI_MACROS_BROKEN
+# undef PRIu64
+# define PRIu64 (sizeof (long) == 8 ? "lu" : "llu")
+#endif
+#if !defined PRIx64 || PRI_MACROS_BROKEN
+# undef PRIx64
+# define PRIx64 (sizeof (long) == 8 ? "lx" : "llx")
+#endif
+#if !defined PRIX64 || PRI_MACROS_BROKEN
+# undef PRIX64
+# define PRIX64 (sizeof (long) == 8 ? "lX" : "llX")
+#endif
+#if !defined PRIdLEAST8 || PRI_MACROS_BROKEN
+# undef PRIdLEAST8
+# define PRIdLEAST8 "d"
+#endif
+#if !defined PRIiLEAST8 || PRI_MACROS_BROKEN
+# undef PRIiLEAST8
+# define PRIiLEAST8 "i"
+#endif
+#if !defined PRIoLEAST8 || PRI_MACROS_BROKEN
+# undef PRIoLEAST8
+# define PRIoLEAST8 "o"
+#endif
+#if !defined PRIuLEAST8 || PRI_MACROS_BROKEN
+# undef PRIuLEAST8
+# define PRIuLEAST8 "u"
+#endif
+#if !defined PRIxLEAST8 || PRI_MACROS_BROKEN
+# undef PRIxLEAST8
+# define PRIxLEAST8 "x"
+#endif
+#if !defined PRIXLEAST8 || PRI_MACROS_BROKEN
+# undef PRIXLEAST8
+# define PRIXLEAST8 "X"
+#endif
+#if !defined PRIdLEAST16 || PRI_MACROS_BROKEN
+# undef PRIdLEAST16
+# define PRIdLEAST16 "d"
+#endif
+#if !defined PRIiLEAST16 || PRI_MACROS_BROKEN
+# undef PRIiLEAST16
+# define PRIiLEAST16 "i"
+#endif
+#if !defined PRIoLEAST16 || PRI_MACROS_BROKEN
+# undef PRIoLEAST16
+# define PRIoLEAST16 "o"
+#endif
+#if !defined PRIuLEAST16 || PRI_MACROS_BROKEN
+# undef PRIuLEAST16
+# define PRIuLEAST16 "u"
+#endif
+#if !defined PRIxLEAST16 || PRI_MACROS_BROKEN
+# undef PRIxLEAST16
+# define PRIxLEAST16 "x"
+#endif
+#if !defined PRIXLEAST16 || PRI_MACROS_BROKEN
+# undef PRIXLEAST16
+# define PRIXLEAST16 "X"
+#endif
+#if !defined PRIdLEAST32 || PRI_MACROS_BROKEN
+# undef PRIdLEAST32
+# define PRIdLEAST32 "d"
+#endif
+#if !defined PRIiLEAST32 || PRI_MACROS_BROKEN
+# undef PRIiLEAST32
+# define PRIiLEAST32 "i"
+#endif
+#if !defined PRIoLEAST32 || PRI_MACROS_BROKEN
+# undef PRIoLEAST32
+# define PRIoLEAST32 "o"
+#endif
+#if !defined PRIuLEAST32 || PRI_MACROS_BROKEN
+# undef PRIuLEAST32
+# define PRIuLEAST32 "u"
+#endif
+#if !defined PRIxLEAST32 || PRI_MACROS_BROKEN
+# undef PRIxLEAST32
+# define PRIxLEAST32 "x"
+#endif
+#if !defined PRIXLEAST32 || PRI_MACROS_BROKEN
+# undef PRIXLEAST32
+# define PRIXLEAST32 "X"
+#endif
+#if !defined PRIdLEAST64 || PRI_MACROS_BROKEN
+# undef PRIdLEAST64
+# define PRIdLEAST64 PRId64
+#endif
+#if !defined PRIiLEAST64 || PRI_MACROS_BROKEN
+# undef PRIiLEAST64
+# define PRIiLEAST64 PRIi64
+#endif
+#if !defined PRIoLEAST64 || PRI_MACROS_BROKEN
+# undef PRIoLEAST64
+# define PRIoLEAST64 PRIo64
+#endif
+#if !defined PRIuLEAST64 || PRI_MACROS_BROKEN
+# undef PRIuLEAST64
+# define PRIuLEAST64 PRIu64
+#endif
+#if !defined PRIxLEAST64 || PRI_MACROS_BROKEN
+# undef PRIxLEAST64
+# define PRIxLEAST64 PRIx64
+#endif
+#if !defined PRIXLEAST64 || PRI_MACROS_BROKEN
+# undef PRIXLEAST64
+# define PRIXLEAST64 PRIX64
+#endif
+#if !defined PRIdFAST8 || PRI_MACROS_BROKEN
+# undef PRIdFAST8
+# define PRIdFAST8 "d"
+#endif
+#if !defined PRIiFAST8 || PRI_MACROS_BROKEN
+# undef PRIiFAST8
+# define PRIiFAST8 "i"
+#endif
+#if !defined PRIoFAST8 || PRI_MACROS_BROKEN
+# undef PRIoFAST8
+# define PRIoFAST8 "o"
+#endif
+#if !defined PRIuFAST8 || PRI_MACROS_BROKEN
+# undef PRIuFAST8
+# define PRIuFAST8 "u"
+#endif
+#if !defined PRIxFAST8 || PRI_MACROS_BROKEN
+# undef PRIxFAST8
+# define PRIxFAST8 "x"
+#endif
+#if !defined PRIXFAST8 || PRI_MACROS_BROKEN
+# undef PRIXFAST8
+# define PRIXFAST8 "X"
+#endif
+#if !defined PRIdFAST16 || PRI_MACROS_BROKEN
+# undef PRIdFAST16
+# define PRIdFAST16 "d"
+#endif
+#if !defined PRIiFAST16 || PRI_MACROS_BROKEN
+# undef PRIiFAST16
+# define PRIiFAST16 "i"
+#endif
+#if !defined PRIoFAST16 || PRI_MACROS_BROKEN
+# undef PRIoFAST16
+# define PRIoFAST16 "o"
+#endif
+#if !defined PRIuFAST16 || PRI_MACROS_BROKEN
+# undef PRIuFAST16
+# define PRIuFAST16 "u"
+#endif
+#if !defined PRIxFAST16 || PRI_MACROS_BROKEN
+# undef PRIxFAST16
+# define PRIxFAST16 "x"
+#endif
+#if !defined PRIXFAST16 || PRI_MACROS_BROKEN
+# undef PRIXFAST16
+# define PRIXFAST16 "X"
+#endif
+#if !defined PRIdFAST32 || PRI_MACROS_BROKEN
+# undef PRIdFAST32
+# define PRIdFAST32 "d"
+#endif
+#if !defined PRIiFAST32 || PRI_MACROS_BROKEN
+# undef PRIiFAST32
+# define PRIiFAST32 "i"
+#endif
+#if !defined PRIoFAST32 || PRI_MACROS_BROKEN
+# undef PRIoFAST32
+# define PRIoFAST32 "o"
+#endif
+#if !defined PRIuFAST32 || PRI_MACROS_BROKEN
+# undef PRIuFAST32
+# define PRIuFAST32 "u"
+#endif
+#if !defined PRIxFAST32 || PRI_MACROS_BROKEN
+# undef PRIxFAST32
+# define PRIxFAST32 "x"
+#endif
+#if !defined PRIXFAST32 || PRI_MACROS_BROKEN
+# undef PRIXFAST32
+# define PRIXFAST32 "X"
+#endif
+#if !defined PRIdFAST64 || PRI_MACROS_BROKEN
+# undef PRIdFAST64
+# define PRIdFAST64 PRId64
+#endif
+#if !defined PRIiFAST64 || PRI_MACROS_BROKEN
+# undef PRIiFAST64
+# define PRIiFAST64 PRIi64
+#endif
+#if !defined PRIoFAST64 || PRI_MACROS_BROKEN
+# undef PRIoFAST64
+# define PRIoFAST64 PRIo64
+#endif
+#if !defined PRIuFAST64 || PRI_MACROS_BROKEN
+# undef PRIuFAST64
+# define PRIuFAST64 PRIu64
+#endif
+#if !defined PRIxFAST64 || PRI_MACROS_BROKEN
+# undef PRIxFAST64
+# define PRIxFAST64 PRIx64
+#endif
+#if !defined PRIXFAST64 || PRI_MACROS_BROKEN
+# undef PRIXFAST64
+# define PRIXFAST64 PRIX64
+#endif
+#if !defined PRIdMAX || PRI_MACROS_BROKEN
+# undef PRIdMAX
+# define PRIdMAX (sizeof (uintmax_t) == sizeof (long) ? "ld" : "lld")
+#endif
+#if !defined PRIiMAX || PRI_MACROS_BROKEN
+# undef PRIiMAX
+# define PRIiMAX (sizeof (uintmax_t) == sizeof (long) ? "li" : "lli")
+#endif
+#if !defined PRIoMAX || PRI_MACROS_BROKEN
+# undef PRIoMAX
+# define PRIoMAX (sizeof (uintmax_t) == sizeof (long) ? "lo" : "llo")
+#endif
+#if !defined PRIuMAX || PRI_MACROS_BROKEN
+# undef PRIuMAX
+# define PRIuMAX (sizeof (uintmax_t) == sizeof (long) ? "lu" : "llu")
+#endif
+#if !defined PRIxMAX || PRI_MACROS_BROKEN
+# undef PRIxMAX
+# define PRIxMAX (sizeof (uintmax_t) == sizeof (long) ? "lx" : "llx")
+#endif
+#if !defined PRIXMAX || PRI_MACROS_BROKEN
+# undef PRIXMAX
+# define PRIXMAX (sizeof (uintmax_t) == sizeof (long) ? "lX" : "llX")
+#endif
+#if !defined PRIdPTR || PRI_MACROS_BROKEN
+# undef PRIdPTR
+# define PRIdPTR \
+ (sizeof (void *) == sizeof (long) ? "ld" : \
+ sizeof (void *) == sizeof (int) ? "d" : \
+ "lld")
+#endif
+#if !defined PRIiPTR || PRI_MACROS_BROKEN
+# undef PRIiPTR
+# define PRIiPTR \
+ (sizeof (void *) == sizeof (long) ? "li" : \
+ sizeof (void *) == sizeof (int) ? "i" : \
+ "lli")
+#endif
+#if !defined PRIoPTR || PRI_MACROS_BROKEN
+# undef PRIoPTR
+# define PRIoPTR \
+ (sizeof (void *) == sizeof (long) ? "lo" : \
+ sizeof (void *) == sizeof (int) ? "o" : \
+ "llo")
+#endif
+#if !defined PRIuPTR || PRI_MACROS_BROKEN
+# undef PRIuPTR
+# define PRIuPTR \
+ (sizeof (void *) == sizeof (long) ? "lu" : \
+ sizeof (void *) == sizeof (int) ? "u" : \
+ "llu")
+#endif
+#if !defined PRIxPTR || PRI_MACROS_BROKEN
+# undef PRIxPTR
+# define PRIxPTR \
+ (sizeof (void *) == sizeof (long) ? "lx" : \
+ sizeof (void *) == sizeof (int) ? "x" : \
+ "llx")
+#endif
+#if !defined PRIXPTR || PRI_MACROS_BROKEN
+# undef PRIXPTR
+# define PRIXPTR \
+ (sizeof (void *) == sizeof (long) ? "lX" : \
+ sizeof (void *) == sizeof (int) ? "X" : \
+ "llX")
+#endif
/* @@ end of prolog @@ */
/* Rename the non ISO C functions. This is required by the standard
because some ISO C functions will require linking with this object
file and the name space must not be polluted. */
-# define fstat __fstat
# define open __open
# define close __close
# define read __read
# define munmap __munmap
#endif
+/* For those losing systems which don't have `alloca' we have to add
+ some additional code emulating it. */
+#ifdef HAVE_ALLOCA
+# define freea(p) /* nothing */
+#else
+# define alloca(n) malloc (n)
+# define freea(p) free (p)
+#endif
+
+/* For systems that distinguish between text and binary I/O.
+ O_BINARY is usually declared in <fcntl.h>. */
+#if !defined O_BINARY && defined _O_BINARY
+ /* For MSC-compatible compilers. */
+# define O_BINARY _O_BINARY
+# define O_TEXT _O_TEXT
+#endif
+#ifdef __BEOS__
+ /* BeOS 5 has O_BINARY and O_TEXT, but they have no effect. */
+# undef O_BINARY
+# undef O_TEXT
+#endif
+/* On reasonable systems, binary I/O is the default. */
+#ifndef O_BINARY
+# define O_BINARY 0
+#endif
+
+
+/* Prototypes for local functions. Needed to ensure compiler checking of
+ function argument counts despite of K&R C function definition syntax. */
+static const char *get_sysdep_segment_value PARAMS ((const char *name));
+
+
/* We need a sign, whether a new catalog was loaded, which can be associated
with all translations. This is important if the translations are
cached by one of GCC's features. */
-int _nl_msg_cat_cntr = 0;
+int _nl_msg_cat_cntr;
+
+
+/* Expand a system dependent string segment. Return NULL if unsupported. */
+static const char *
+get_sysdep_segment_value (name)
+ const char *name;
+{
+ /* Test for an ISO C 99 section 7.8.1 format string directive.
+ Syntax:
+ P R I { d | i | o | u | x | X }
+ { { | LEAST | FAST } { 8 | 16 | 32 | 64 } | MAX | PTR } */
+ /* We don't use a table of 14 times 6 'const char *' strings here, because
+ data relocations cost startup time. */
+ if (name[0] == 'P' && name[1] == 'R' && name[2] == 'I')
+ {
+ if (name[3] == 'd' || name[3] == 'i' || name[3] == 'o' || name[3] == 'u'
+ || name[3] == 'x' || name[3] == 'X')
+ {
+ if (name[4] == '8' && name[5] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRId8;
+ if (name[3] == 'i')
+ return PRIi8;
+ if (name[3] == 'o')
+ return PRIo8;
+ if (name[3] == 'u')
+ return PRIu8;
+ if (name[3] == 'x')
+ return PRIx8;
+ if (name[3] == 'X')
+ return PRIX8;
+ abort ();
+ }
+ if (name[4] == '1' && name[5] == '6' && name[6] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRId16;
+ if (name[3] == 'i')
+ return PRIi16;
+ if (name[3] == 'o')
+ return PRIo16;
+ if (name[3] == 'u')
+ return PRIu16;
+ if (name[3] == 'x')
+ return PRIx16;
+ if (name[3] == 'X')
+ return PRIX16;
+ abort ();
+ }
+ if (name[4] == '3' && name[5] == '2' && name[6] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRId32;
+ if (name[3] == 'i')
+ return PRIi32;
+ if (name[3] == 'o')
+ return PRIo32;
+ if (name[3] == 'u')
+ return PRIu32;
+ if (name[3] == 'x')
+ return PRIx32;
+ if (name[3] == 'X')
+ return PRIX32;
+ abort ();
+ }
+ if (name[4] == '6' && name[5] == '4' && name[6] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRId64;
+ if (name[3] == 'i')
+ return PRIi64;
+ if (name[3] == 'o')
+ return PRIo64;
+ if (name[3] == 'u')
+ return PRIu64;
+ if (name[3] == 'x')
+ return PRIx64;
+ if (name[3] == 'X')
+ return PRIX64;
+ abort ();
+ }
+ if (name[4] == 'L' && name[5] == 'E' && name[6] == 'A'
+ && name[7] == 'S' && name[8] == 'T')
+ {
+ if (name[9] == '8' && name[10] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdLEAST8;
+ if (name[3] == 'i')
+ return PRIiLEAST8;
+ if (name[3] == 'o')
+ return PRIoLEAST8;
+ if (name[3] == 'u')
+ return PRIuLEAST8;
+ if (name[3] == 'x')
+ return PRIxLEAST8;
+ if (name[3] == 'X')
+ return PRIXLEAST8;
+ abort ();
+ }
+ if (name[9] == '1' && name[10] == '6' && name[11] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdLEAST16;
+ if (name[3] == 'i')
+ return PRIiLEAST16;
+ if (name[3] == 'o')
+ return PRIoLEAST16;
+ if (name[3] == 'u')
+ return PRIuLEAST16;
+ if (name[3] == 'x')
+ return PRIxLEAST16;
+ if (name[3] == 'X')
+ return PRIXLEAST16;
+ abort ();
+ }
+ if (name[9] == '3' && name[10] == '2' && name[11] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdLEAST32;
+ if (name[3] == 'i')
+ return PRIiLEAST32;
+ if (name[3] == 'o')
+ return PRIoLEAST32;
+ if (name[3] == 'u')
+ return PRIuLEAST32;
+ if (name[3] == 'x')
+ return PRIxLEAST32;
+ if (name[3] == 'X')
+ return PRIXLEAST32;
+ abort ();
+ }
+ if (name[9] == '6' && name[10] == '4' && name[11] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdLEAST64;
+ if (name[3] == 'i')
+ return PRIiLEAST64;
+ if (name[3] == 'o')
+ return PRIoLEAST64;
+ if (name[3] == 'u')
+ return PRIuLEAST64;
+ if (name[3] == 'x')
+ return PRIxLEAST64;
+ if (name[3] == 'X')
+ return PRIXLEAST64;
+ abort ();
+ }
+ }
+ if (name[4] == 'F' && name[5] == 'A' && name[6] == 'S'
+ && name[7] == 'T')
+ {
+ if (name[8] == '8' && name[9] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdFAST8;
+ if (name[3] == 'i')
+ return PRIiFAST8;
+ if (name[3] == 'o')
+ return PRIoFAST8;
+ if (name[3] == 'u')
+ return PRIuFAST8;
+ if (name[3] == 'x')
+ return PRIxFAST8;
+ if (name[3] == 'X')
+ return PRIXFAST8;
+ abort ();
+ }
+ if (name[8] == '1' && name[9] == '6' && name[10] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdFAST16;
+ if (name[3] == 'i')
+ return PRIiFAST16;
+ if (name[3] == 'o')
+ return PRIoFAST16;
+ if (name[3] == 'u')
+ return PRIuFAST16;
+ if (name[3] == 'x')
+ return PRIxFAST16;
+ if (name[3] == 'X')
+ return PRIXFAST16;
+ abort ();
+ }
+ if (name[8] == '3' && name[9] == '2' && name[10] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdFAST32;
+ if (name[3] == 'i')
+ return PRIiFAST32;
+ if (name[3] == 'o')
+ return PRIoFAST32;
+ if (name[3] == 'u')
+ return PRIuFAST32;
+ if (name[3] == 'x')
+ return PRIxFAST32;
+ if (name[3] == 'X')
+ return PRIXFAST32;
+ abort ();
+ }
+ if (name[8] == '6' && name[9] == '4' && name[10] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdFAST64;
+ if (name[3] == 'i')
+ return PRIiFAST64;
+ if (name[3] == 'o')
+ return PRIoFAST64;
+ if (name[3] == 'u')
+ return PRIuFAST64;
+ if (name[3] == 'x')
+ return PRIxFAST64;
+ if (name[3] == 'X')
+ return PRIXFAST64;
+ abort ();
+ }
+ }
+ if (name[4] == 'M' && name[5] == 'A' && name[6] == 'X'
+ && name[7] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdMAX;
+ if (name[3] == 'i')
+ return PRIiMAX;
+ if (name[3] == 'o')
+ return PRIoMAX;
+ if (name[3] == 'u')
+ return PRIuMAX;
+ if (name[3] == 'x')
+ return PRIxMAX;
+ if (name[3] == 'X')
+ return PRIXMAX;
+ abort ();
+ }
+ if (name[4] == 'P' && name[5] == 'T' && name[6] == 'R'
+ && name[7] == '\0')
+ {
+ if (name[3] == 'd')
+ return PRIdPTR;
+ if (name[3] == 'i')
+ return PRIiPTR;
+ if (name[3] == 'o')
+ return PRIoPTR;
+ if (name[3] == 'u')
+ return PRIuPTR;
+ if (name[3] == 'x')
+ return PRIxPTR;
+ if (name[3] == 'X')
+ return PRIXPTR;
+ abort ();
+ }
+ }
+ }
+ /* Other system dependent strings are not valid. */
+ return NULL;
+}
+/* Initialize the codeset dependent parts of an opened message catalog.
+ Return the header entry. */
+const char *
+internal_function
+_nl_init_domain_conv (domain_file, domain, domainbinding)
+ struct loaded_l10nfile *domain_file;
+ struct loaded_domain *domain;
+ struct binding *domainbinding;
+{
+ /* Find out about the character set the file is encoded with.
+ This can be found (in textual form) in the entry "". If this
+ entry does not exist or if this does not contain the `charset='
+ information, we will assume the charset matches the one the
+ current locale and we don't have to perform any conversion. */
+ char *nullentry;
+ size_t nullentrylen;
+
+ /* Preinitialize fields, to avoid recursion during _nl_find_msg. */
+ domain->codeset_cntr =
+ (domainbinding != NULL ? domainbinding->codeset_cntr : 0);
+#ifdef _LIBC
+ domain->conv = (__gconv_t) -1;
+#else
+# if HAVE_ICONV
+ domain->conv = (iconv_t) -1;
+# endif
+#endif
+ domain->conv_tab = NULL;
+
+ /* Get the header entry. */
+ nullentry = _nl_find_msg (domain_file, domainbinding, "", &nullentrylen);
+
+ if (nullentry != NULL)
+ {
+#if defined _LIBC || HAVE_ICONV
+ const char *charsetstr;
+
+ charsetstr = strstr (nullentry, "charset=");
+ if (charsetstr != NULL)
+ {
+ size_t len;
+ char *charset;
+ const char *outcharset;
+
+ charsetstr += strlen ("charset=");
+ len = strcspn (charsetstr, " \t\n");
+
+ charset = (char *) alloca (len + 1);
+# if defined _LIBC || HAVE_MEMPCPY
+ *((char *) mempcpy (charset, charsetstr, len)) = '\0';
+# else
+ memcpy (charset, charsetstr, len);
+ charset[len] = '\0';
+# endif
+
+ /* The output charset should normally be determined by the
+ locale. But sometimes the locale is not used or not correctly
+ set up, so we provide a possibility for the user to override
+ this. Moreover, the value specified through
+ bind_textdomain_codeset overrides both. */
+ if (domainbinding != NULL && domainbinding->codeset != NULL)
+ outcharset = domainbinding->codeset;
+ else
+ {
+ outcharset = getenv ("OUTPUT_CHARSET");
+ if (outcharset == NULL || outcharset[0] == '\0')
+ {
+# ifdef _LIBC
+ outcharset = _NL_CURRENT (LC_CTYPE, CODESET);
+# else
+# if HAVE_ICONV
+ extern const char *locale_charset PARAMS ((void));
+ outcharset = locale_charset ();
+# endif
+# endif
+ }
+ }
+
+# ifdef _LIBC
+ /* We always want to use transliteration. */
+ outcharset = norm_add_slashes (outcharset, "TRANSLIT");
+ charset = norm_add_slashes (charset, NULL);
+ if (__gconv_open (outcharset, charset, &domain->conv,
+ GCONV_AVOID_NOCONV)
+ != __GCONV_OK)
+ domain->conv = (__gconv_t) -1;
+# else
+# if HAVE_ICONV
+ /* When using GNU libc >= 2.2 or GNU libiconv >= 1.5,
+ we want to use transliteration. */
+# if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2) || __GLIBC__ > 2 \
+ || _LIBICONV_VERSION >= 0x0105
+ if (strchr (outcharset, '/') == NULL)
+ {
+ char *tmp;
+
+ len = strlen (outcharset);
+ tmp = (char *) alloca (len + 10 + 1);
+ memcpy (tmp, outcharset, len);
+ memcpy (tmp + len, "//TRANSLIT", 10 + 1);
+ outcharset = tmp;
+
+ domain->conv = iconv_open (outcharset, charset);
+
+ freea (outcharset);
+ }
+ else
+# endif
+ domain->conv = iconv_open (outcharset, charset);
+# endif
+# endif
+
+ freea (charset);
+ }
+#endif /* _LIBC || HAVE_ICONV */
+ }
+
+ return nullentry;
+}
+
+/* Frees the codeset dependent parts of an opened message catalog. */
+void
+internal_function
+_nl_free_domain_conv (domain)
+ struct loaded_domain *domain;
+{
+ if (domain->conv_tab != NULL && domain->conv_tab != (char **) -1)
+ free (domain->conv_tab);
+
+#ifdef _LIBC
+ if (domain->conv != (__gconv_t) -1)
+ __gconv_close (domain->conv);
+#else
+# if HAVE_ICONV
+ if (domain->conv != (iconv_t) -1)
+ iconv_close (domain->conv);
+# endif
+#endif
+}
/* Load the message catalogs specified by FILENAME. If it is no valid
message catalog do nothing. */
void
-_nl_load_domain (domain_file)
+internal_function
+_nl_load_domain (domain_file, domainbinding)
struct loaded_l10nfile *domain_file;
+ struct binding *domainbinding;
{
int fd;
+ size_t size;
+#ifdef _LIBC
+ struct stat64 st;
+#else
struct stat st;
+#endif
struct mo_file_header *data = (struct mo_file_header *) -1;
-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
- || defined _LIBC
int use_mmap = 0;
-#endif
struct loaded_domain *domain;
+ int revision;
+ const char *nullentry;
domain_file->decided = 1;
domain_file->data = NULL;
+ /* Note that it would be useless to store domainbinding in domain_file
+ because domainbinding might be == NULL now but != NULL later (after
+ a call to bind_textdomain_codeset). */
+
/* If the record does not represent a valid locale the FILENAME
might be NULL. This can happen when according to the given
specification the locale file name is different for XPG and CEN
return;
/* Try to open the addressed file. */
- fd = open (domain_file->filename, O_RDONLY);
+ fd = open (domain_file->filename, O_RDONLY | O_BINARY);
if (fd == -1)
return;
/* We must know about the size of the file. */
- if (fstat (fd, &st) != 0
- && st.st_size < (off_t) sizeof (struct mo_file_header))
+ if (
+#ifdef _LIBC
+ __builtin_expect (fstat64 (fd, &st) != 0, 0)
+#else
+ __builtin_expect (fstat (fd, &st) != 0, 0)
+#endif
+ || __builtin_expect ((size = (size_t) st.st_size) != st.st_size, 0)
+ || __builtin_expect (size < sizeof (struct mo_file_header), 0))
{
/* Something went wrong. */
close (fd);
return;
}
-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
- || defined _LIBC
+#ifdef HAVE_MMAP
/* Now we are ready to load the file. If mmap() is available we try
this first. If not available or it failed we try to load it. */
- data = (struct mo_file_header *) mmap (NULL, st.st_size, PROT_READ,
+ data = (struct mo_file_header *) mmap (NULL, size, PROT_READ,
MAP_PRIVATE, fd, 0);
- if (data != (struct mo_file_header *) -1)
+ if (__builtin_expect (data != (struct mo_file_header *) -1, 1))
{
/* mmap() call was successful. */
close (fd);
it manually. */
if (data == (struct mo_file_header *) -1)
{
- off_t to_read;
+ size_t to_read;
char *read_ptr;
- data = (struct mo_file_header *) malloc (st.st_size);
+ data = (struct mo_file_header *) malloc (size);
if (data == NULL)
return;
- to_read = st.st_size;
+ to_read = size;
read_ptr = (char *) data;
do
{
long int nb = (long int) read (fd, read_ptr, to_read);
- if (nb == -1)
+ if (nb <= 0)
{
+#ifdef EINTR
+ if (nb == -1 && errno == EINTR)
+ continue;
+#endif
close (fd);
return;
}
-
read_ptr += nb;
to_read -= nb;
}
/* Using the magic number we can test whether it really is a message
catalog file. */
- if (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED)
+ if (__builtin_expect (data->magic != _MAGIC && data->magic != _MAGIC_SWAPPED,
+ 0))
{
/* The magic number is wrong: not a message catalog file. */
-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
- || defined _LIBC
+#ifdef HAVE_MMAP
if (use_mmap)
- munmap ((caddr_t) data, st.st_size);
+ munmap ((caddr_t) data, size);
else
#endif
free (data);
return;
}
- domain_file->data
- = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
- if (domain_file->data == NULL)
+ domain = (struct loaded_domain *) malloc (sizeof (struct loaded_domain));
+ if (domain == NULL)
return;
+ domain_file->data = domain;
- domain = (struct loaded_domain *) domain_file->data;
domain->data = (char *) data;
+ domain->use_mmap = use_mmap;
+ domain->mmap_size = size;
domain->must_swap = data->magic != _MAGIC;
+ domain->malloced = NULL;
/* Fill in the information about the available tables. */
- switch (W (domain->must_swap, data->revision))
+ revision = W (domain->must_swap, data->revision);
+ /* We support only the major revision 0. */
+ switch (revision >> 16)
{
case 0:
domain->nstrings = W (domain->must_swap, data->nstrings);
- domain->orig_tab = (struct string_desc *)
+ domain->orig_tab = (const struct string_desc *)
((char *) data + W (domain->must_swap, data->orig_tab_offset));
- domain->trans_tab = (struct string_desc *)
+ domain->trans_tab = (const struct string_desc *)
((char *) data + W (domain->must_swap, data->trans_tab_offset));
domain->hash_size = W (domain->must_swap, data->hash_tab_size);
- domain->hash_tab = (nls_uint32 *)
- ((char *) data + W (domain->must_swap, data->hash_tab_offset));
+ domain->hash_tab =
+ (domain->hash_size > 2
+ ? (const nls_uint32 *)
+ ((char *) data + W (domain->must_swap, data->hash_tab_offset))
+ : NULL);
+ domain->must_swap_hash_tab = domain->must_swap;
+
+ /* Now dispatch on the minor revision. */
+ switch (revision & 0xffff)
+ {
+ case 0:
+ domain->n_sysdep_strings = 0;
+ domain->orig_sysdep_tab = NULL;
+ domain->trans_sysdep_tab = NULL;
+ break;
+ case 1:
+ default:
+ {
+ nls_uint32 n_sysdep_strings;
+
+ if (domain->hash_tab == NULL)
+ /* This is invalid. These minor revisions need a hash table. */
+ goto invalid;
+
+ n_sysdep_strings =
+ W (domain->must_swap, data->n_sysdep_strings);
+ if (n_sysdep_strings > 0)
+ {
+ nls_uint32 n_sysdep_segments;
+ const struct sysdep_segment *sysdep_segments;
+ const char **sysdep_segment_values;
+ const nls_uint32 *orig_sysdep_tab;
+ const nls_uint32 *trans_sysdep_tab;
+ size_t memneed;
+ char *mem;
+ struct sysdep_string_desc *inmem_orig_sysdep_tab;
+ struct sysdep_string_desc *inmem_trans_sysdep_tab;
+ nls_uint32 *inmem_hash_tab;
+ unsigned int i;
+
+ /* Get the values of the system dependent segments. */
+ n_sysdep_segments =
+ W (domain->must_swap, data->n_sysdep_segments);
+ sysdep_segments = (const struct sysdep_segment *)
+ ((char *) data
+ + W (domain->must_swap, data->sysdep_segments_offset));
+ sysdep_segment_values =
+ alloca (n_sysdep_segments * sizeof (const char *));
+ for (i = 0; i < n_sysdep_segments; i++)
+ {
+ const char *name =
+ (char *) data
+ + W (domain->must_swap, sysdep_segments[i].offset);
+ nls_uint32 namelen =
+ W (domain->must_swap, sysdep_segments[i].length);
+
+ if (!(namelen > 0 && name[namelen - 1] == '\0'))
+ {
+ freea (sysdep_segment_values);
+ goto invalid;
+ }
+
+ sysdep_segment_values[i] = get_sysdep_segment_value (name);
+ }
+
+ orig_sysdep_tab = (const nls_uint32 *)
+ ((char *) data
+ + W (domain->must_swap, data->orig_sysdep_tab_offset));
+ trans_sysdep_tab = (const nls_uint32 *)
+ ((char *) data
+ + W (domain->must_swap, data->trans_sysdep_tab_offset));
+
+ /* Compute the amount of additional memory needed for the
+ system dependent strings and the augmented hash table. */
+ memneed = 2 * n_sysdep_strings
+ * sizeof (struct sysdep_string_desc)
+ + domain->hash_size * sizeof (nls_uint32);
+ for (i = 0; i < 2 * n_sysdep_strings; i++)
+ {
+ const struct sysdep_string *sysdep_string =
+ (const struct sysdep_string *)
+ ((char *) data
+ + W (domain->must_swap,
+ i < n_sysdep_strings
+ ? orig_sysdep_tab[i]
+ : trans_sysdep_tab[i - n_sysdep_strings]));
+ size_t need = 0;
+ const struct segment_pair *p = sysdep_string->segments;
+
+ if (W (domain->must_swap, p->sysdepref) != SEGMENTS_END)
+ for (p = sysdep_string->segments;; p++)
+ {
+ nls_uint32 sysdepref;
+
+ need += W (domain->must_swap, p->segsize);
+
+ sysdepref = W (domain->must_swap, p->sysdepref);
+ if (sysdepref == SEGMENTS_END)
+ break;
+
+ if (sysdepref >= n_sysdep_segments)
+ {
+ /* Invalid. */
+ freea (sysdep_segment_values);
+ goto invalid;
+ }
+
+ need += strlen (sysdep_segment_values[sysdepref]);
+ }
+
+ memneed += need;
+ }
+
+ /* Allocate additional memory. */
+ mem = (char *) malloc (memneed);
+ if (mem == NULL)
+ goto invalid;
+
+ domain->malloced = mem;
+ inmem_orig_sysdep_tab = (struct sysdep_string_desc *) mem;
+ mem += n_sysdep_strings * sizeof (struct sysdep_string_desc);
+ inmem_trans_sysdep_tab = (struct sysdep_string_desc *) mem;
+ mem += n_sysdep_strings * sizeof (struct sysdep_string_desc);
+ inmem_hash_tab = (nls_uint32 *) mem;
+ mem += domain->hash_size * sizeof (nls_uint32);
+
+ /* Compute the system dependent strings. */
+ for (i = 0; i < 2 * n_sysdep_strings; i++)
+ {
+ const struct sysdep_string *sysdep_string =
+ (const struct sysdep_string *)
+ ((char *) data
+ + W (domain->must_swap,
+ i < n_sysdep_strings
+ ? orig_sysdep_tab[i]
+ : trans_sysdep_tab[i - n_sysdep_strings]));
+ const char *static_segments =
+ (char *) data
+ + W (domain->must_swap, sysdep_string->offset);
+ const struct segment_pair *p = sysdep_string->segments;
+
+ /* Concatenate the segments, and fill
+ inmem_orig_sysdep_tab[i] (for i < n_sysdep_strings) and
+ inmem_trans_sysdep_tab[i-n_sysdep_strings] (for
+ i >= n_sysdep_strings). */
+
+ if (W (domain->must_swap, p->sysdepref) == SEGMENTS_END)
+ {
+ /* Only one static segment. */
+ inmem_orig_sysdep_tab[i].length =
+ W (domain->must_swap, p->segsize);
+ inmem_orig_sysdep_tab[i].pointer = static_segments;
+ }
+ else
+ {
+ inmem_orig_sysdep_tab[i].pointer = mem;
+
+ for (p = sysdep_string->segments;; p++)
+ {
+ nls_uint32 segsize =
+ W (domain->must_swap, p->segsize);
+ nls_uint32 sysdepref =
+ W (domain->must_swap, p->sysdepref);
+ size_t n;
+
+ if (segsize > 0)
+ {
+ memcpy (mem, static_segments, segsize);
+ mem += segsize;
+ static_segments += segsize;
+ }
+
+ if (sysdepref == SEGMENTS_END)
+ break;
+
+ n = strlen (sysdep_segment_values[sysdepref]);
+ memcpy (mem, sysdep_segment_values[sysdepref], n);
+ mem += n;
+ }
+
+ inmem_orig_sysdep_tab[i].length =
+ mem - inmem_orig_sysdep_tab[i].pointer;
+ }
+ }
+
+ /* Compute the augmented hash table. */
+ for (i = 0; i < domain->hash_size; i++)
+ inmem_hash_tab[i] =
+ W (domain->must_swap_hash_tab, domain->hash_tab[i]);
+ for (i = 0; i < n_sysdep_strings; i++)
+ {
+ const char *msgid = inmem_orig_sysdep_tab[i].pointer;
+ nls_uint32 hash_val = hash_string (msgid);
+ nls_uint32 idx = hash_val % domain->hash_size;
+ nls_uint32 incr = 1 + (hash_val % (domain->hash_size - 2));
+
+ for (;;)
+ {
+ if (inmem_hash_tab[idx] == 0)
+ {
+ /* Hash table entry is empty. Use it. */
+ inmem_hash_tab[idx] = 1 + domain->nstrings + i;
+ break;
+ }
+
+ if (idx >= domain->hash_size - incr)
+ idx -= domain->hash_size - incr;
+ else
+ idx += incr;
+ }
+ }
+
+ freea (sysdep_segment_values);
+
+ domain->n_sysdep_strings = n_sysdep_strings;
+ domain->orig_sysdep_tab = inmem_orig_sysdep_tab;
+ domain->trans_sysdep_tab = inmem_trans_sysdep_tab;
+
+ domain->hash_tab = inmem_hash_tab;
+ domain->must_swap_hash_tab = 0;
+ }
+ else
+ {
+ domain->n_sysdep_strings = 0;
+ domain->orig_sysdep_tab = NULL;
+ domain->trans_sysdep_tab = NULL;
+ }
+ }
+ break;
+ }
break;
default:
- /* This is an illegal revision. */
-#if (defined HAVE_MMAP && defined HAVE_MUNMAP && !defined DISALLOW_MMAP) \
- || defined _LIBC
+ /* This is an invalid revision. */
+ invalid:
+ /* This is an invalid .mo file. */
+ if (domain->malloced)
+ free (domain->malloced);
+#ifdef HAVE_MMAP
if (use_mmap)
- munmap ((caddr_t) data, st.st_size);
+ munmap ((caddr_t) data, size);
else
#endif
free (data);
return;
}
- /* Show that one domain is changed. This might make some cached
- translations invalid. */
- ++_nl_msg_cat_cntr;
+ /* Now initialize the character set converter from the character set
+ the file is encoded with (found in the header entry) to the domain's
+ specified character set or the locale's character set. */
+ nullentry = _nl_init_domain_conv (domain_file, domain, domainbinding);
+
+ /* Also look for a plural specification. */
+ EXTRACT_PLURAL_EXPRESSION (nullentry, &domain->plural, &domain->nplurals);
}
+
+
+#ifdef _LIBC
+void
+internal_function
+_nl_unload_domain (domain)
+ struct loaded_domain *domain;
+{
+ if (domain->plural != &__gettext_germanic_plural)
+ __gettext_free_exp (domain->plural);
+
+ _nl_free_domain_conv (domain);
+
+ if (domain->malloced)
+ free (domain->malloced);
+
+# ifdef _POSIX_MAPPED_FILES
+ if (domain->use_mmap)
+ munmap ((caddr_t) domain->data, domain->mmap_size);
+ else
+# endif /* _POSIX_MAPPED_FILES */
+ free ((void *) domain->data);
+
+ free (domain);
+}
+#endif
--- /dev/null
+/* Determine a canonical name for the current locale's character encoding.
+
+ Copyright (C) 2000-2003 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* Written by Bruno Haible <bruno@clisp.org>. */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+/* Specification. */
+#include "localcharset.h"
+
+#if HAVE_STDDEF_H
+# include <stddef.h>
+#endif
+
+#include <stdio.h>
+#if HAVE_STRING_H
+# include <string.h>
+#else
+# include <strings.h>
+#endif
+#if HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
+#if defined _WIN32 || defined __WIN32__
+# undef WIN32 /* avoid warning on mingw32 */
+# define WIN32
+#endif
+
+#if defined __EMX__
+/* Assume EMX program runs on OS/2, even if compiled under DOS. */
+# define OS2
+#endif
+
+#if !defined WIN32
+# if HAVE_LANGINFO_CODESET
+# include <langinfo.h>
+# else
+# if HAVE_SETLOCALE
+# include <locale.h>
+# endif
+# endif
+#elif defined WIN32
+# define WIN32_LEAN_AND_MEAN
+# include <windows.h>
+#endif
+#if defined OS2
+# define INCL_DOS
+# include <os2.h>
+#endif
+
+#if ENABLE_RELOCATABLE
+# include "relocatable.h"
+#else
+# define relocate(pathname) (pathname)
+#endif
+
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+ /* Win32, OS/2, DOS */
+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
+#endif
+
+#ifndef DIRECTORY_SEPARATOR
+# define DIRECTORY_SEPARATOR '/'
+#endif
+
+#ifndef ISSLASH
+# define ISSLASH(C) ((C) == DIRECTORY_SEPARATOR)
+#endif
+
+#ifdef HAVE_GETC_UNLOCKED
+# undef getc
+# define getc getc_unlocked
+#endif
+
+/* The following static variable is declared 'volatile' to avoid a
+ possible multithread problem in the function get_charset_aliases. If we
+ are running in a threaded environment, and if two threads initialize
+ 'charset_aliases' simultaneously, both will produce the same value,
+ and everything will be ok if the two assignments to 'charset_aliases'
+ are atomic. But I don't know what will happen if the two assignments mix. */
+#if __STDC__ != 1
+# define volatile /* empty */
+#endif
+/* Pointer to the contents of the charset.alias file, if it has already been
+ read, else NULL. Its format is:
+ ALIAS_1 '\0' CANONICAL_1 '\0' ... ALIAS_n '\0' CANONICAL_n '\0' '\0' */
+static const char * volatile charset_aliases;
+
+/* Return a pointer to the contents of the charset.alias file. */
+static const char *
+get_charset_aliases ()
+{
+ const char *cp;
+
+ cp = charset_aliases;
+ if (cp == NULL)
+ {
+#if !(defined VMS || defined WIN32)
+ FILE *fp;
+ const char *dir = relocate (LIBDIR);
+ const char *base = "charset.alias";
+ char *file_name;
+
+ /* Concatenate dir and base into freshly allocated file_name. */
+ {
+ size_t dir_len = strlen (dir);
+ size_t base_len = strlen (base);
+ int add_slash = (dir_len > 0 && !ISSLASH (dir[dir_len - 1]));
+ file_name = (char *) malloc (dir_len + add_slash + base_len + 1);
+ if (file_name != NULL)
+ {
+ memcpy (file_name, dir, dir_len);
+ if (add_slash)
+ file_name[dir_len] = DIRECTORY_SEPARATOR;
+ memcpy (file_name + dir_len + add_slash, base, base_len + 1);
+ }
+ }
+
+ if (file_name == NULL || (fp = fopen (file_name, "r")) == NULL)
+ /* Out of memory or file not found, treat it as empty. */
+ cp = "";
+ else
+ {
+ /* Parse the file's contents. */
+ int c;
+ char buf1[50+1];
+ char buf2[50+1];
+ char *res_ptr = NULL;
+ size_t res_size = 0;
+ size_t l1, l2;
+
+ for (;;)
+ {
+ c = getc (fp);
+ if (c == EOF)
+ break;
+ if (c == '\n' || c == ' ' || c == '\t')
+ continue;
+ if (c == '#')
+ {
+ /* Skip comment, to end of line. */
+ do
+ c = getc (fp);
+ while (!(c == EOF || c == '\n'));
+ if (c == EOF)
+ break;
+ continue;
+ }
+ ungetc (c, fp);
+ if (fscanf (fp, "%50s %50s", buf1, buf2) < 2)
+ break;
+ l1 = strlen (buf1);
+ l2 = strlen (buf2);
+ if (res_size == 0)
+ {
+ res_size = l1 + 1 + l2 + 1;
+ res_ptr = (char *) malloc (res_size + 1);
+ }
+ else
+ {
+ res_size += l1 + 1 + l2 + 1;
+ res_ptr = (char *) realloc (res_ptr, res_size + 1);
+ }
+ if (res_ptr == NULL)
+ {
+ /* Out of memory. */
+ res_size = 0;
+ break;
+ }
+ strcpy (res_ptr + res_size - (l2 + 1) - (l1 + 1), buf1);
+ strcpy (res_ptr + res_size - (l2 + 1), buf2);
+ }
+ fclose (fp);
+ if (res_size == 0)
+ cp = "";
+ else
+ {
+ *(res_ptr + res_size) = '\0';
+ cp = res_ptr;
+ }
+ }
+
+ if (file_name != NULL)
+ free (file_name);
+
+#else
+
+# if defined VMS
+ /* To avoid the troubles of an extra file charset.alias_vms in the
+ sources of many GNU packages, simply inline the aliases here. */
+ /* The list of encodings is taken from the OpenVMS 7.3-1 documentation
+ "Compaq C Run-Time Library Reference Manual for OpenVMS systems"
+ section 10.7 "Handling Different Character Sets". */
+ cp = "ISO8859-1" "\0" "ISO-8859-1" "\0"
+ "ISO8859-2" "\0" "ISO-8859-2" "\0"
+ "ISO8859-5" "\0" "ISO-8859-5" "\0"
+ "ISO8859-7" "\0" "ISO-8859-7" "\0"
+ "ISO8859-8" "\0" "ISO-8859-8" "\0"
+ "ISO8859-9" "\0" "ISO-8859-9" "\0"
+ /* Japanese */
+ "eucJP" "\0" "EUC-JP" "\0"
+ "SJIS" "\0" "SHIFT_JIS" "\0"
+ "DECKANJI" "\0" "DEC-KANJI" "\0"
+ "SDECKANJI" "\0" "EUC-JP" "\0"
+ /* Chinese */
+ "eucTW" "\0" "EUC-TW" "\0"
+ "DECHANYU" "\0" "DEC-HANYU" "\0"
+ "DECHANZI" "\0" "GB2312" "\0"
+ /* Korean */
+ "DECKOREAN" "\0" "EUC-KR" "\0";
+# endif
+
+# if defined WIN32
+ /* To avoid the troubles of installing a separate file in the same
+ directory as the DLL and of retrieving the DLL's directory at
+ runtime, simply inline the aliases here. */
+
+ cp = "CP936" "\0" "GBK" "\0"
+ "CP1361" "\0" "JOHAB" "\0"
+ "CP20127" "\0" "ASCII" "\0"
+ "CP20866" "\0" "KOI8-R" "\0"
+ "CP21866" "\0" "KOI8-RU" "\0"
+ "CP28591" "\0" "ISO-8859-1" "\0"
+ "CP28592" "\0" "ISO-8859-2" "\0"
+ "CP28593" "\0" "ISO-8859-3" "\0"
+ "CP28594" "\0" "ISO-8859-4" "\0"
+ "CP28595" "\0" "ISO-8859-5" "\0"
+ "CP28596" "\0" "ISO-8859-6" "\0"
+ "CP28597" "\0" "ISO-8859-7" "\0"
+ "CP28598" "\0" "ISO-8859-8" "\0"
+ "CP28599" "\0" "ISO-8859-9" "\0"
+ "CP28605" "\0" "ISO-8859-15" "\0";
+# endif
+#endif
+
+ charset_aliases = cp;
+ }
+
+ return cp;
+}
+
+/* Determine the current locale's character encoding, and canonicalize it
+ into one of the canonical names listed in config.charset.
+ The result must not be freed; it is statically allocated.
+ If the canonical name cannot be determined, the result is a non-canonical
+ name. */
+
+#ifdef STATIC
+STATIC
+#endif
+const char *
+locale_charset ()
+{
+ const char *codeset;
+ const char *aliases;
+
+#if !(defined WIN32 || defined OS2)
+
+# if HAVE_LANGINFO_CODESET
+
+ /* Most systems support nl_langinfo (CODESET) nowadays. */
+ codeset = nl_langinfo (CODESET);
+
+# else
+
+ /* On old systems which lack it, use setlocale or getenv. */
+ const char *locale = NULL;
+
+ /* But most old systems don't have a complete set of locales. Some
+ (like SunOS 4 or DJGPP) have only the C locale. Therefore we don't
+ use setlocale here; it would return "C" when it doesn't support the
+ locale name the user has set. */
+# if HAVE_SETLOCALE && 0
+ locale = setlocale (LC_CTYPE, NULL);
+# endif
+ if (locale == NULL || locale[0] == '\0')
+ {
+ locale = getenv ("LC_ALL");
+ if (locale == NULL || locale[0] == '\0')
+ {
+ locale = getenv ("LC_CTYPE");
+ if (locale == NULL || locale[0] == '\0')
+ locale = getenv ("LANG");
+ }
+ }
+
+ /* On some old systems, one used to set locale = "iso8859_1". On others,
+ you set it to "language_COUNTRY.charset". In any case, we resolve it
+ through the charset.alias file. */
+ codeset = locale;
+
+# endif
+
+#elif defined WIN32
+
+ static char buf[2 + 10 + 1];
+
+ /* Woe32 has a function returning the locale's codepage as a number. */
+ sprintf (buf, "CP%u", GetACP ());
+ codeset = buf;
+
+#elif defined OS2
+
+ const char *locale;
+ static char buf[2 + 10 + 1];
+ ULONG cp[3];
+ ULONG cplen;
+
+ /* Allow user to override the codeset, as set in the operating system,
+ with standard language environment variables. */
+ locale = getenv ("LC_ALL");
+ if (locale == NULL || locale[0] == '\0')
+ {
+ locale = getenv ("LC_CTYPE");
+ if (locale == NULL || locale[0] == '\0')
+ locale = getenv ("LANG");
+ }
+ if (locale != NULL && locale[0] != '\0')
+ {
+ /* If the locale name contains an encoding after the dot, return it. */
+ const char *dot = strchr (locale, '.');
+
+ if (dot != NULL)
+ {
+ const char *modifier;
+
+ dot++;
+ /* Look for the possible @... trailer and remove it, if any. */
+ modifier = strchr (dot, '@');
+ if (modifier == NULL)
+ return dot;
+ if (modifier - dot < sizeof (buf))
+ {
+ memcpy (buf, dot, modifier - dot);
+ buf [modifier - dot] = '\0';
+ return buf;
+ }
+ }
+
+ /* Resolve through the charset.alias file. */
+ codeset = locale;
+ }
+ else
+ {
+ /* OS/2 has a function returning the locale's codepage as a number. */
+ if (DosQueryCp (sizeof (cp), cp, &cplen))
+ codeset = "";
+ else
+ {
+ sprintf (buf, "CP%u", cp[0]);
+ codeset = buf;
+ }
+ }
+
+#endif
+
+ if (codeset == NULL)
+ /* The canonical name cannot be determined. */
+ codeset = "";
+
+ /* Resolve alias. */
+ for (aliases = get_charset_aliases ();
+ *aliases != '\0';
+ aliases += strlen (aliases) + 1, aliases += strlen (aliases) + 1)
+ if (strcmp (codeset, aliases) == 0
+ || (aliases[0] == '*' && aliases[1] == '\0'))
+ {
+ codeset = aliases + strlen (aliases) + 1;
+ break;
+ }
+
+ /* Don't return an empty string. GNU libc and GNU libiconv interpret
+ the empty string as denoting "the locale's character encoding",
+ thus GNU libiconv would call this function a second time. */
+ if (codeset[0] == '\0')
+ codeset = "ASCII";
+
+ return codeset;
+}
--- /dev/null
+/* Determine a canonical name for the current locale's character encoding.
+ Copyright (C) 2000-2003 Free Software Foundation, Inc.
+ This file is part of the GNU CHARSET Library.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _LOCALCHARSET_H
+#define _LOCALCHARSET_H
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* Determine the current locale's character encoding, and canonicalize it
+ into one of the canonical names listed in config.charset.
+ The result must not be freed; it is statically allocated.
+ If the canonical name cannot be determined, the result is a non-canonical
+ name. */
+extern const char * locale_charset (void);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* _LOCALCHARSET_H */
--- /dev/null
+# Locale name alias data base.
+# Copyright (C) 1996,1997,1998,1999,2000,2001 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Library General Public License for more details.
+#
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+# USA.
+
+# The format of this file is the same as for the corresponding file of
+# the X Window System, which normally can be found in
+# /usr/lib/X11/locale/locale.alias
+# A single line contains two fields: an alias and a substitution value.
+# All entries are case independent.
+
+# Note: This file is far from being complete. If you have a value for
+# your own site which you think might be useful for others too, share
+# it with the rest of us. Send it using the `glibcbug' script to
+# bugs@gnu.org.
+
+# Packages using this file:
+
+bokmal no_NO.ISO-8859-1
+bokmål no_NO.ISO-8859-1
+catalan ca_ES.ISO-8859-1
+croatian hr_HR.ISO-8859-2
+czech cs_CZ.ISO-8859-2
+danish da_DK.ISO-8859-1
+dansk da_DK.ISO-8859-1
+deutsch de_DE.ISO-8859-1
+dutch nl_NL.ISO-8859-1
+eesti et_EE.ISO-8859-1
+estonian et_EE.ISO-8859-1
+finnish fi_FI.ISO-8859-1
+français fr_FR.ISO-8859-1
+french fr_FR.ISO-8859-1
+galego gl_ES.ISO-8859-1
+galician gl_ES.ISO-8859-1
+german de_DE.ISO-8859-1
+greek el_GR.ISO-8859-7
+hebrew he_IL.ISO-8859-8
+hrvatski hr_HR.ISO-8859-2
+hungarian hu_HU.ISO-8859-2
+icelandic is_IS.ISO-8859-1
+italian it_IT.ISO-8859-1
+japanese ja_JP.eucJP
+japanese.euc ja_JP.eucJP
+ja_JP ja_JP.eucJP
+ja_JP.ujis ja_JP.eucJP
+japanese.sjis ja_JP.SJIS
+korean ko_KR.eucKR
+korean.euc ko_KR.eucKR
+ko_KR ko_KR.eucKR
+lithuanian lt_LT.ISO-8859-13
+nb_NO no_NO.ISO-8859-1
+nb_NO.ISO-8859-1 no_NO.ISO-8859-1
+norwegian no_NO.ISO-8859-1
+nynorsk nn_NO.ISO-8859-1
+polish pl_PL.ISO-8859-2
+portuguese pt_PT.ISO-8859-1
+romanian ro_RO.ISO-8859-2
+russian ru_RU.ISO-8859-5
+slovak sk_SK.ISO-8859-2
+slovene sl_SI.ISO-8859-2
+slovenian sl_SI.ISO-8859-2
+spanish es_ES.ISO-8859-1
+swedish sv_SE.ISO-8859-1
+thai th_TH.TIS-620
+turkish tr_TR.ISO-8859-9
-/* Handle aliases for locale names
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
- Written by Ulrich Drepper <drepper@gnu.org>, 1995.
+/* Handle aliases for locale names.
+ Copyright (C) 1995-1999, 2000-2001, 2003 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* Tell glibc's <string.h> to provide a prototype for mempcpy().
+ This must come before <config.h> because <config.h> may include
+ <features.h>, and once <features.h> has been included, it's too late. */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE 1
+#endif
#ifdef HAVE_CONFIG_H
# include <config.h>
#include <ctype.h>
#include <stdio.h>
+#if defined _LIBC || defined HAVE___FSETLOCKING
+# include <stdio_ext.h>
+#endif
#include <sys/types.h>
#ifdef __GNUC__
+# undef alloca
# define alloca __builtin_alloca
# define HAVE_ALLOCA 1
#else
-# if defined HAVE_ALLOCA_H || defined _LIBC
-# include <alloca.h>
+# ifdef _MSC_VER
+# include <malloc.h>
+# define alloca _alloca
# else
-# ifdef _AIX
- #pragma alloca
+# if defined HAVE_ALLOCA_H || defined _LIBC
+# include <alloca.h>
# else
-# ifndef alloca
+# ifdef _AIX
+ #pragma alloca
+# else
+# ifndef alloca
char *alloca ();
+# endif
# endif
# endif
# endif
#endif
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#else
-char *getenv ();
-# ifdef HAVE_MALLOC_H
-# include <malloc.h>
-# else
-void free ();
-# endif
-#endif
+#include <stdlib.h>
+#include <string.h>
-#if defined HAVE_STRING_H || defined _LIBC
-# ifndef _GNU_SOURCE
-# define _GNU_SOURCE 1
-# endif
-# include <string.h>
+#include "gettextP.h"
+
+#if ENABLE_RELOCATABLE
+# include "relocatable.h"
#else
-# include <strings.h>
-# ifndef memcpy
-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
-#endif
-#if !HAVE_STRCHR && !defined _LIBC
-# ifndef strchr
-# define strchr index
-# endif
+# define relocate(pathname) (pathname)
#endif
-#include "gettext.h"
-#include "gettextP.h"
-
/* @@ end of prolog @@ */
#ifdef _LIBC
because some ANSI C functions will require linking with this object
file and the name space must not be polluted. */
# define strcasecmp __strcasecmp
+
+# ifndef mempcpy
+# define mempcpy __mempcpy
+# endif
+# define HAVE_MEMPCPY 1
+# define HAVE___FSETLOCKING 1
+
+/* We need locking here since we can be called from different places. */
+# include <bits/libc-lock.h>
+
+__libc_lock_define_initialized (static, lock);
#endif
+#ifndef internal_function
+# define internal_function
+#endif
-/* For those loosing systems which don't have `alloca' we have to add
+/* Some optimizations for glibc. */
+#ifdef _LIBC
+# define FEOF(fp) feof_unlocked (fp)
+# define FGETS(buf, n, fp) fgets_unlocked (buf, n, fp)
+#else
+# define FEOF(fp) feof (fp)
+# define FGETS(buf, n, fp) fgets (buf, n, fp)
+#endif
+
+/* For those losing systems which don't have `alloca' we have to add
some additional code emulating it. */
#ifdef HAVE_ALLOCA
-/* Nothing has to be done. */
-# define ADD_BLOCK(list, address) /* nothing */
-# define FREE_BLOCKS(list) /* nothing */
+# define freea(p) /* nothing */
#else
-struct block_list
-{
- void *address;
- struct block_list *next;
-};
-# define ADD_BLOCK(list, addr) \
- do { \
- struct block_list *newp = (struct block_list *) malloc (sizeof (*newp)); \
- /* If we cannot get a free block we cannot add the new element to \
- the list. */ \
- if (newp != NULL) { \
- newp->address = (addr); \
- newp->next = (list); \
- (list) = newp; \
- } \
- } while (0)
-# define FREE_BLOCKS(list) \
- do { \
- while (list != NULL) { \
- struct block_list *old = list; \
- list = list->next; \
- free (old); \
- } \
- } while (0)
-# undef alloca
-# define alloca(size) (malloc (size))
-#endif /* have alloca */
+# define alloca(n) malloc (n)
+# define freea(p) free (p)
+#endif
+
+#if defined _LIBC_REENTRANT || defined HAVE_FGETS_UNLOCKED
+# undef fgets
+# define fgets(buf, len, s) fgets_unlocked (buf, len, s)
+#endif
+#if defined _LIBC_REENTRANT || defined HAVE_FEOF_UNLOCKED
+# undef feof
+# define feof(s) feof_unlocked (s)
+#endif
struct alias_map
};
-static struct alias_map *map;
-static size_t nmap = 0;
-static size_t maxmap = 0;
+#ifndef _LIBC
+# define libc_freeres_ptr(decl) decl
+#endif
+
+libc_freeres_ptr (static char *string_space);
+static size_t string_space_act;
+static size_t string_space_max;
+libc_freeres_ptr (static struct alias_map *map);
+static size_t nmap;
+static size_t maxmap;
/* Prototypes for local functions. */
-static size_t read_alias_file PARAMS ((const char *fname, int fname_len));
-static void extend_alias_table PARAMS ((void));
+static size_t read_alias_file PARAMS ((const char *fname, int fname_len))
+ internal_function;
+static int extend_alias_table PARAMS ((void));
static int alias_compare PARAMS ((const struct alias_map *map1,
const struct alias_map *map2));
_nl_expand_alias (name)
const char *name;
{
- static const char *locale_alias_path = LOCALE_ALIAS_PATH;
+ static const char *locale_alias_path;
struct alias_map *retval;
+ const char *result = NULL;
size_t added;
+#ifdef _LIBC
+ __libc_lock_lock (lock);
+#endif
+
+ if (locale_alias_path == NULL)
+ locale_alias_path = LOCALE_ALIAS_PATH;
+
do
{
struct alias_map item;
/* We really found an alias. Return the value. */
if (retval != NULL)
- return retval->value;
+ {
+ result = retval->value;
+ break;
+ }
/* Perhaps we can find another alias file. */
added = 0;
{
const char *start;
- while (locale_alias_path[0] == ':')
+ while (locale_alias_path[0] == PATH_SEPARATOR)
++locale_alias_path;
start = locale_alias_path;
- while (locale_alias_path[0] != '\0' && locale_alias_path[0] != ':')
+ while (locale_alias_path[0] != '\0'
+ && locale_alias_path[0] != PATH_SEPARATOR)
++locale_alias_path;
if (start < locale_alias_path)
}
while (added != 0);
- return NULL;
+#ifdef _LIBC
+ __libc_lock_unlock (lock);
+#endif
+
+ return result;
}
static size_t
+internal_function
read_alias_file (fname, fname_len)
const char *fname;
int fname_len;
{
-#ifndef HAVE_ALLOCA
- struct block_list *block_list = NULL;
-#endif
FILE *fp;
char *full_fname;
size_t added;
static const char aliasfile[] = "/locale.alias";
full_fname = (char *) alloca (fname_len + sizeof aliasfile);
- ADD_BLOCK (block_list, full_fname);
+#ifdef HAVE_MEMPCPY
+ mempcpy (mempcpy (full_fname, fname, fname_len),
+ aliasfile, sizeof aliasfile);
+#else
memcpy (full_fname, fname, fname_len);
memcpy (&full_fname[fname_len], aliasfile, sizeof aliasfile);
+#endif
- fp = fopen (full_fname, "r");
+ fp = fopen (relocate (full_fname), "r");
+ freea (full_fname);
if (fp == NULL)
- {
- FREE_BLOCKS (block_list);
- return 0;
- }
+ return 0;
+
+#ifdef HAVE___FSETLOCKING
+ /* No threads present. */
+ __fsetlocking (fp, FSETLOCKING_BYCALLER);
+#endif
added = 0;
- while (!feof (fp))
+ while (!FEOF (fp))
{
/* It is a reasonable approach to use a fix buffer here because
a) we are only interested in the first two fields
b) these fields must be usable as file names and so must not
be that long
- */
- char buf[BUFSIZ];
+ We avoid a multi-kilobyte buffer here since this would use up
+ stack space which we might not have if the program ran out of
+ memory. */
+ char buf[400];
char *alias;
char *value;
char *cp;
- if (fgets (buf, BUFSIZ, fp) == NULL)
+ if (FGETS (buf, sizeof buf, fp) == NULL)
/* EOF reached. */
break;
cp = buf;
/* Ignore leading white space. */
- while (isspace (cp[0]))
+ while (isspace ((unsigned char) cp[0]))
++cp;
/* A leading '#' signals a comment line. */
if (cp[0] != '\0' && cp[0] != '#')
{
alias = cp++;
- while (cp[0] != '\0' && !isspace (cp[0]))
+ while (cp[0] != '\0' && !isspace ((unsigned char) cp[0]))
++cp;
/* Terminate alias name. */
if (cp[0] != '\0')
*cp++ = '\0';
/* Now look for the beginning of the value. */
- while (isspace (cp[0]))
+ while (isspace ((unsigned char) cp[0]))
++cp;
if (cp[0] != '\0')
{
- char *tp;
- size_t len;
+ size_t alias_len;
+ size_t value_len;
value = cp++;
- while (cp[0] != '\0' && !isspace (cp[0]))
+ while (cp[0] != '\0' && !isspace ((unsigned char) cp[0]))
++cp;
/* Terminate value. */
if (cp[0] == '\n')
*cp++ = '\0';
if (nmap >= maxmap)
- extend_alias_table ();
-
- /* We cannot depend on strdup available in the libc. Sigh! */
- len = strlen (alias) + 1;
- tp = (char *) malloc (len);
- if (tp == NULL)
- {
- FREE_BLOCKS (block_list);
+ if (__builtin_expect (extend_alias_table (), 0))
return added;
- }
- memcpy (tp, alias, len);
- map[nmap].alias = tp;
- len = strlen (value) + 1;
- tp = (char *) malloc (len);
- if (tp == NULL)
+ alias_len = strlen (alias) + 1;
+ value_len = strlen (value) + 1;
+
+ if (string_space_act + alias_len + value_len > string_space_max)
{
- FREE_BLOCKS (block_list);
- return added;
+ /* Increase size of memory pool. */
+ size_t new_size = (string_space_max
+ + (alias_len + value_len > 1024
+ ? alias_len + value_len : 1024));
+ char *new_pool = (char *) realloc (string_space, new_size);
+ if (new_pool == NULL)
+ return added;
+
+ if (__builtin_expect (string_space != new_pool, 0))
+ {
+ size_t i;
+
+ for (i = 0; i < nmap; i++)
+ {
+ map[i].alias += new_pool - string_space;
+ map[i].value += new_pool - string_space;
+ }
+ }
+
+ string_space = new_pool;
+ string_space_max = new_size;
}
- memcpy (tp, value, len);
- map[nmap].value = tp;
+
+ map[nmap].alias = memcpy (&string_space[string_space_act],
+ alias, alias_len);
+ string_space_act += alias_len;
+
+ map[nmap].value = memcpy (&string_space[string_space_act],
+ value, value_len);
+ string_space_act += value_len;
++nmap;
++added;
/* Possibly not the whole line fits into the buffer. Ignore
the rest of the line. */
- while (strchr (cp, '\n') == NULL)
- {
- cp = buf;
- if (fgets (buf, BUFSIZ, fp) == NULL)
- /* Make sure the inner loop will be left. The outer loop
- will exit at the `feof' test. */
- *cp = '\n';
- }
+ while (strchr (buf, '\n') == NULL)
+ if (FGETS (buf, sizeof buf, fp) == NULL)
+ /* Make sure the inner loop will be left. The outer loop
+ will exit at the `feof' test. */
+ break;
}
/* Should we test for ferror()? I think we have to silently ignore
qsort (map, nmap, sizeof (struct alias_map),
(int (*) PARAMS ((const void *, const void *))) alias_compare);
- FREE_BLOCKS (block_list);
return added;
}
-static void
+static int
extend_alias_table ()
{
size_t new_size;
struct alias_map *new_map;
new_size = maxmap == 0 ? 100 : 2 * maxmap;
- new_map = (struct alias_map *) malloc (new_size
- * sizeof (struct alias_map));
+ new_map = (struct alias_map *) realloc (map, (new_size
+ * sizeof (struct alias_map)));
if (new_map == NULL)
/* Simply don't extend: we don't have any more core. */
- return;
-
- memcpy (new_map, map, nmap * sizeof (struct alias_map));
-
- if (maxmap != 0)
- free (map);
+ return -1;
map = new_map;
maxmap = new_size;
+ return 0;
}
--- /dev/null
+/* Determine the current selected locale.
+ Copyright (C) 1995-1999, 2000-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* Written by Ulrich Drepper <drepper@gnu.org>, 1995. */
+/* Win32 code written by Tor Lillqvist <tml@iki.fi>. */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <locale.h>
+
+#if defined _WIN32 || defined __WIN32__
+# undef WIN32 /* avoid warning on mingw32 */
+# define WIN32
+#endif
+
+#ifdef WIN32
+# define WIN32_LEAN_AND_MEAN
+# include <windows.h>
+/* Mingw headers don't have latest language and sublanguage codes. */
+# ifndef LANG_AFRIKAANS
+# define LANG_AFRIKAANS 0x36
+# endif
+# ifndef LANG_ALBANIAN
+# define LANG_ALBANIAN 0x1c
+# endif
+# ifndef LANG_ARABIC
+# define LANG_ARABIC 0x01
+# endif
+# ifndef LANG_ARMENIAN
+# define LANG_ARMENIAN 0x2b
+# endif
+# ifndef LANG_ASSAMESE
+# define LANG_ASSAMESE 0x4d
+# endif
+# ifndef LANG_AZERI
+# define LANG_AZERI 0x2c
+# endif
+# ifndef LANG_BASQUE
+# define LANG_BASQUE 0x2d
+# endif
+# ifndef LANG_BELARUSIAN
+# define LANG_BELARUSIAN 0x23
+# endif
+# ifndef LANG_BENGALI
+# define LANG_BENGALI 0x45
+# endif
+# ifndef LANG_CATALAN
+# define LANG_CATALAN 0x03
+# endif
+# ifndef LANG_DIVEHI
+# define LANG_DIVEHI 0x65
+# endif
+# ifndef LANG_ESTONIAN
+# define LANG_ESTONIAN 0x25
+# endif
+# ifndef LANG_FAEROESE
+# define LANG_FAEROESE 0x38
+# endif
+# ifndef LANG_FARSI
+# define LANG_FARSI 0x29
+# endif
+# ifndef LANG_GALICIAN
+# define LANG_GALICIAN 0x56
+# endif
+# ifndef LANG_GEORGIAN
+# define LANG_GEORGIAN 0x37
+# endif
+# ifndef LANG_GUJARATI
+# define LANG_GUJARATI 0x47
+# endif
+# ifndef LANG_HEBREW
+# define LANG_HEBREW 0x0d
+# endif
+# ifndef LANG_HINDI
+# define LANG_HINDI 0x39
+# endif
+# ifndef LANG_INDONESIAN
+# define LANG_INDONESIAN 0x21
+# endif
+# ifndef LANG_KANNADA
+# define LANG_KANNADA 0x4b
+# endif
+# ifndef LANG_KASHMIRI
+# define LANG_KASHMIRI 0x60
+# endif
+# ifndef LANG_KAZAK
+# define LANG_KAZAK 0x3f
+# endif
+# ifndef LANG_KONKANI
+# define LANG_KONKANI 0x57
+# endif
+# ifndef LANG_KYRGYZ
+# define LANG_KYRGYZ 0x40
+# endif
+# ifndef LANG_LATVIAN
+# define LANG_LATVIAN 0x26
+# endif
+# ifndef LANG_LITHUANIAN
+# define LANG_LITHUANIAN 0x27
+# endif
+# ifndef LANG_MACEDONIAN
+# define LANG_MACEDONIAN 0x2f
+# endif
+# ifndef LANG_MALAY
+# define LANG_MALAY 0x3e
+# endif
+# ifndef LANG_MALAYALAM
+# define LANG_MALAYALAM 0x4c
+# endif
+# ifndef LANG_MANIPURI
+# define LANG_MANIPURI 0x58
+# endif
+# ifndef LANG_MARATHI
+# define LANG_MARATHI 0x4e
+# endif
+# ifndef LANG_MONGOLIAN
+# define LANG_MONGOLIAN 0x50
+# endif
+# ifndef LANG_NEPALI
+# define LANG_NEPALI 0x61
+# endif
+# ifndef LANG_ORIYA
+# define LANG_ORIYA 0x48
+# endif
+# ifndef LANG_PUNJABI
+# define LANG_PUNJABI 0x46
+# endif
+# ifndef LANG_SANSKRIT
+# define LANG_SANSKRIT 0x4f
+# endif
+# ifndef LANG_SERBIAN
+# define LANG_SERBIAN 0x1a
+# endif
+# ifndef LANG_SINDHI
+# define LANG_SINDHI 0x59
+# endif
+# ifndef LANG_SLOVAK
+# define LANG_SLOVAK 0x1b
+# endif
+# ifndef LANG_SORBIAN
+# define LANG_SORBIAN 0x2e
+# endif
+# ifndef LANG_SWAHILI
+# define LANG_SWAHILI 0x41
+# endif
+# ifndef LANG_SYRIAC
+# define LANG_SYRIAC 0x5a
+# endif
+# ifndef LANG_TAMIL
+# define LANG_TAMIL 0x49
+# endif
+# ifndef LANG_TATAR
+# define LANG_TATAR 0x44
+# endif
+# ifndef LANG_TELUGU
+# define LANG_TELUGU 0x4a
+# endif
+# ifndef LANG_THAI
+# define LANG_THAI 0x1e
+# endif
+# ifndef LANG_UKRAINIAN
+# define LANG_UKRAINIAN 0x22
+# endif
+# ifndef LANG_URDU
+# define LANG_URDU 0x20
+# endif
+# ifndef LANG_UZBEK
+# define LANG_UZBEK 0x43
+# endif
+# ifndef LANG_VIETNAMESE
+# define LANG_VIETNAMESE 0x2a
+# endif
+# ifndef SUBLANG_ARABIC_SAUDI_ARABIA
+# define SUBLANG_ARABIC_SAUDI_ARABIA 0x01
+# endif
+# ifndef SUBLANG_ARABIC_IRAQ
+# define SUBLANG_ARABIC_IRAQ 0x02
+# endif
+# ifndef SUBLANG_ARABIC_EGYPT
+# define SUBLANG_ARABIC_EGYPT 0x03
+# endif
+# ifndef SUBLANG_ARABIC_LIBYA
+# define SUBLANG_ARABIC_LIBYA 0x04
+# endif
+# ifndef SUBLANG_ARABIC_ALGERIA
+# define SUBLANG_ARABIC_ALGERIA 0x05
+# endif
+# ifndef SUBLANG_ARABIC_MOROCCO
+# define SUBLANG_ARABIC_MOROCCO 0x06
+# endif
+# ifndef SUBLANG_ARABIC_TUNISIA
+# define SUBLANG_ARABIC_TUNISIA 0x07
+# endif
+# ifndef SUBLANG_ARABIC_OMAN
+# define SUBLANG_ARABIC_OMAN 0x08
+# endif
+# ifndef SUBLANG_ARABIC_YEMEN
+# define SUBLANG_ARABIC_YEMEN 0x09
+# endif
+# ifndef SUBLANG_ARABIC_SYRIA
+# define SUBLANG_ARABIC_SYRIA 0x0a
+# endif
+# ifndef SUBLANG_ARABIC_JORDAN
+# define SUBLANG_ARABIC_JORDAN 0x0b
+# endif
+# ifndef SUBLANG_ARABIC_LEBANON
+# define SUBLANG_ARABIC_LEBANON 0x0c
+# endif
+# ifndef SUBLANG_ARABIC_KUWAIT
+# define SUBLANG_ARABIC_KUWAIT 0x0d
+# endif
+# ifndef SUBLANG_ARABIC_UAE
+# define SUBLANG_ARABIC_UAE 0x0e
+# endif
+# ifndef SUBLANG_ARABIC_BAHRAIN
+# define SUBLANG_ARABIC_BAHRAIN 0x0f
+# endif
+# ifndef SUBLANG_ARABIC_QATAR
+# define SUBLANG_ARABIC_QATAR 0x10
+# endif
+# ifndef SUBLANG_AZERI_LATIN
+# define SUBLANG_AZERI_LATIN 0x01
+# endif
+# ifndef SUBLANG_AZERI_CYRILLIC
+# define SUBLANG_AZERI_CYRILLIC 0x02
+# endif
+# ifndef SUBLANG_CHINESE_MACAU
+# define SUBLANG_CHINESE_MACAU 0x05
+# endif
+# ifndef SUBLANG_ENGLISH_SOUTH_AFRICA
+# define SUBLANG_ENGLISH_SOUTH_AFRICA 0x07
+# endif
+# ifndef SUBLANG_ENGLISH_JAMAICA
+# define SUBLANG_ENGLISH_JAMAICA 0x08
+# endif
+# ifndef SUBLANG_ENGLISH_CARIBBEAN
+# define SUBLANG_ENGLISH_CARIBBEAN 0x09
+# endif
+# ifndef SUBLANG_ENGLISH_BELIZE
+# define SUBLANG_ENGLISH_BELIZE 0x0a
+# endif
+# ifndef SUBLANG_ENGLISH_TRINIDAD
+# define SUBLANG_ENGLISH_TRINIDAD 0x0b
+# endif
+# ifndef SUBLANG_ENGLISH_ZIMBABWE
+# define SUBLANG_ENGLISH_ZIMBABWE 0x0c
+# endif
+# ifndef SUBLANG_ENGLISH_PHILIPPINES
+# define SUBLANG_ENGLISH_PHILIPPINES 0x0d
+# endif
+# ifndef SUBLANG_FRENCH_LUXEMBOURG
+# define SUBLANG_FRENCH_LUXEMBOURG 0x05
+# endif
+# ifndef SUBLANG_FRENCH_MONACO
+# define SUBLANG_FRENCH_MONACO 0x06
+# endif
+# ifndef SUBLANG_GERMAN_LUXEMBOURG
+# define SUBLANG_GERMAN_LUXEMBOURG 0x04
+# endif
+# ifndef SUBLANG_GERMAN_LIECHTENSTEIN
+# define SUBLANG_GERMAN_LIECHTENSTEIN 0x05
+# endif
+# ifndef SUBLANG_KASHMIRI_INDIA
+# define SUBLANG_KASHMIRI_INDIA 0x02
+# endif
+# ifndef SUBLANG_MALAY_MALAYSIA
+# define SUBLANG_MALAY_MALAYSIA 0x01
+# endif
+# ifndef SUBLANG_MALAY_BRUNEI_DARUSSALAM
+# define SUBLANG_MALAY_BRUNEI_DARUSSALAM 0x02
+# endif
+# ifndef SUBLANG_NEPALI_INDIA
+# define SUBLANG_NEPALI_INDIA 0x02
+# endif
+# ifndef SUBLANG_SERBIAN_LATIN
+# define SUBLANG_SERBIAN_LATIN 0x02
+# endif
+# ifndef SUBLANG_SERBIAN_CYRILLIC
+# define SUBLANG_SERBIAN_CYRILLIC 0x03
+# endif
+# ifndef SUBLANG_SPANISH_GUATEMALA
+# define SUBLANG_SPANISH_GUATEMALA 0x04
+# endif
+# ifndef SUBLANG_SPANISH_COSTA_RICA
+# define SUBLANG_SPANISH_COSTA_RICA 0x05
+# endif
+# ifndef SUBLANG_SPANISH_PANAMA
+# define SUBLANG_SPANISH_PANAMA 0x06
+# endif
+# ifndef SUBLANG_SPANISH_DOMINICAN_REPUBLIC
+# define SUBLANG_SPANISH_DOMINICAN_REPUBLIC 0x07
+# endif
+# ifndef SUBLANG_SPANISH_VENEZUELA
+# define SUBLANG_SPANISH_VENEZUELA 0x08
+# endif
+# ifndef SUBLANG_SPANISH_COLOMBIA
+# define SUBLANG_SPANISH_COLOMBIA 0x09
+# endif
+# ifndef SUBLANG_SPANISH_PERU
+# define SUBLANG_SPANISH_PERU 0x0a
+# endif
+# ifndef SUBLANG_SPANISH_ARGENTINA
+# define SUBLANG_SPANISH_ARGENTINA 0x0b
+# endif
+# ifndef SUBLANG_SPANISH_ECUADOR
+# define SUBLANG_SPANISH_ECUADOR 0x0c
+# endif
+# ifndef SUBLANG_SPANISH_CHILE
+# define SUBLANG_SPANISH_CHILE 0x0d
+# endif
+# ifndef SUBLANG_SPANISH_URUGUAY
+# define SUBLANG_SPANISH_URUGUAY 0x0e
+# endif
+# ifndef SUBLANG_SPANISH_PARAGUAY
+# define SUBLANG_SPANISH_PARAGUAY 0x0f
+# endif
+# ifndef SUBLANG_SPANISH_BOLIVIA
+# define SUBLANG_SPANISH_BOLIVIA 0x10
+# endif
+# ifndef SUBLANG_SPANISH_EL_SALVADOR
+# define SUBLANG_SPANISH_EL_SALVADOR 0x11
+# endif
+# ifndef SUBLANG_SPANISH_HONDURAS
+# define SUBLANG_SPANISH_HONDURAS 0x12
+# endif
+# ifndef SUBLANG_SPANISH_NICARAGUA
+# define SUBLANG_SPANISH_NICARAGUA 0x13
+# endif
+# ifndef SUBLANG_SPANISH_PUERTO_RICO
+# define SUBLANG_SPANISH_PUERTO_RICO 0x14
+# endif
+# ifndef SUBLANG_SWEDISH_FINLAND
+# define SUBLANG_SWEDISH_FINLAND 0x02
+# endif
+# ifndef SUBLANG_URDU_PAKISTAN
+# define SUBLANG_URDU_PAKISTAN 0x01
+# endif
+# ifndef SUBLANG_URDU_INDIA
+# define SUBLANG_URDU_INDIA 0x02
+# endif
+# ifndef SUBLANG_UZBEK_LATIN
+# define SUBLANG_UZBEK_LATIN 0x01
+# endif
+# ifndef SUBLANG_UZBEK_CYRILLIC
+# define SUBLANG_UZBEK_CYRILLIC 0x02
+# endif
+#endif
+
+/* XPG3 defines the result of 'setlocale (category, NULL)' as:
+ "Directs 'setlocale()' to query 'category' and return the current
+ setting of 'local'."
+ However it does not specify the exact format. Neither do SUSV2 and
+ ISO C 99. So we can use this feature only on selected systems (e.g.
+ those using GNU C Library). */
+#if defined _LIBC || (defined __GNU_LIBRARY__ && __GNU_LIBRARY__ >= 2)
+# define HAVE_LOCALE_NULL
+#endif
+
+/* Determine the current locale's name, and canonicalize it into XPG syntax
+ language[_territory[.codeset]][@modifier]
+ The codeset part in the result is not reliable; the locale_charset()
+ should be used for codeset information instead.
+ The result must not be freed; it is statically allocated. */
+
+const char *
+_nl_locale_name (category, categoryname)
+ int category;
+ const char *categoryname;
+{
+ const char *retval;
+
+#ifndef WIN32
+
+ /* Use the POSIX methods of looking to 'LC_ALL', 'LC_xxx', and 'LANG'.
+ On some systems this can be done by the 'setlocale' function itself. */
+# if defined HAVE_SETLOCALE && defined HAVE_LC_MESSAGES && defined HAVE_LOCALE_NULL
+ retval = setlocale (category, NULL);
+# else
+ /* Setting of LC_ALL overwrites all other. */
+ retval = getenv ("LC_ALL");
+ if (retval == NULL || retval[0] == '\0')
+ {
+ /* Next comes the name of the desired category. */
+ retval = getenv (categoryname);
+ if (retval == NULL || retval[0] == '\0')
+ {
+ /* Last possibility is the LANG environment variable. */
+ retval = getenv ("LANG");
+ if (retval == NULL || retval[0] == '\0')
+ /* We use C as the default domain. POSIX says this is
+ implementation defined. */
+ retval = "C";
+ }
+ }
+# endif
+
+ return retval;
+
+#else /* WIN32 */
+
+ /* Return an XPG style locale name language[_territory][@modifier].
+ Don't even bother determining the codeset; it's not useful in this
+ context, because message catalogs are not specific to a single
+ codeset. */
+
+ LCID lcid;
+ LANGID langid;
+ int primary, sub;
+
+ /* Let the user override the system settings through environment
+ variables, as on POSIX systems. */
+ retval = getenv ("LC_ALL");
+ if (retval != NULL && retval[0] != '\0')
+ return retval;
+ retval = getenv (categoryname);
+ if (retval != NULL && retval[0] != '\0')
+ return retval;
+ retval = getenv ("LANG");
+ if (retval != NULL && retval[0] != '\0')
+ return retval;
+
+ /* Use native Win32 API locale ID. */
+ lcid = GetThreadLocale ();
+
+ /* Strip off the sorting rules, keep only the language part. */
+ langid = LANGIDFROMLCID (lcid);
+
+ /* Split into language and territory part. */
+ primary = PRIMARYLANGID (langid);
+ sub = SUBLANGID (langid);
+
+ /* Dispatch on language.
+ See also http://www.unicode.org/unicode/onlinedat/languages.html .
+ For details about languages, see http://www.ethnologue.com/ . */
+ switch (primary)
+ {
+ case LANG_AFRIKAANS: return "af_ZA";
+ case LANG_ALBANIAN: return "sq_AL";
+ case 0x5e: /* AMHARIC */ return "am_ET";
+ case LANG_ARABIC:
+ switch (sub)
+ {
+ case SUBLANG_ARABIC_SAUDI_ARABIA: return "ar_SA";
+ case SUBLANG_ARABIC_IRAQ: return "ar_IQ";
+ case SUBLANG_ARABIC_EGYPT: return "ar_EG";
+ case SUBLANG_ARABIC_LIBYA: return "ar_LY";
+ case SUBLANG_ARABIC_ALGERIA: return "ar_DZ";
+ case SUBLANG_ARABIC_MOROCCO: return "ar_MA";
+ case SUBLANG_ARABIC_TUNISIA: return "ar_TN";
+ case SUBLANG_ARABIC_OMAN: return "ar_OM";
+ case SUBLANG_ARABIC_YEMEN: return "ar_YE";
+ case SUBLANG_ARABIC_SYRIA: return "ar_SY";
+ case SUBLANG_ARABIC_JORDAN: return "ar_JO";
+ case SUBLANG_ARABIC_LEBANON: return "ar_LB";
+ case SUBLANG_ARABIC_KUWAIT: return "ar_KW";
+ case SUBLANG_ARABIC_UAE: return "ar_AE";
+ case SUBLANG_ARABIC_BAHRAIN: return "ar_BH";
+ case SUBLANG_ARABIC_QATAR: return "ar_QA";
+ }
+ return "ar";
+ case LANG_ARMENIAN: return "hy_AM";
+ case LANG_ASSAMESE: return "as_IN";
+ case LANG_AZERI:
+ switch (sub)
+ {
+ /* FIXME: Adjust this when Azerbaijani locales appear on Unix. */
+ case SUBLANG_AZERI_LATIN: return "az_AZ@latin";
+ case SUBLANG_AZERI_CYRILLIC: return "az_AZ@cyrillic";
+ }
+ return "az";
+ case LANG_BASQUE:
+ return "eu"; /* Ambiguous: could be "eu_ES" or "eu_FR". */
+ case LANG_BELARUSIAN: return "be_BY";
+ case LANG_BENGALI: return "bn_IN";
+ case LANG_BULGARIAN: return "bg_BG";
+ case 0x55: /* BURMESE */ return "my_MM";
+ case 0x53: /* CAMBODIAN */ return "km_KH";
+ case LANG_CATALAN: return "ca_ES";
+ case 0x5c: /* CHEROKEE */ return "chr_US";
+ case LANG_CHINESE:
+ switch (sub)
+ {
+ case SUBLANG_CHINESE_TRADITIONAL: return "zh_TW";
+ case SUBLANG_CHINESE_SIMPLIFIED: return "zh_CN";
+ case SUBLANG_CHINESE_HONGKONG: return "zh_HK";
+ case SUBLANG_CHINESE_SINGAPORE: return "zh_SG";
+ case SUBLANG_CHINESE_MACAU: return "zh_MO";
+ }
+ return "zh";
+ case LANG_CROATIAN: /* LANG_CROATIAN == LANG_SERBIAN
+ * What used to be called Serbo-Croatian
+ * should really now be two separate
+ * languages because of political reasons.
+ * (Says tml, who knows nothing about Serbian
+ * or Croatian.)
+ * (I can feel those flames coming already.)
+ */
+ switch (sub)
+ {
+ case SUBLANG_DEFAULT: return "hr_HR";
+ case SUBLANG_SERBIAN_LATIN: return "sr_YU";
+ case SUBLANG_SERBIAN_CYRILLIC: return "sr_YU@cyrillic";
+ }
+ return "hr";
+ case LANG_CZECH: return "cs_CZ";
+ case LANG_DANISH: return "da_DK";
+ case LANG_DIVEHI: return "div_MV";
+ case LANG_DUTCH:
+ switch (sub)
+ {
+ case SUBLANG_DUTCH: return "nl_NL";
+ case SUBLANG_DUTCH_BELGIAN: /* FLEMISH, VLAAMS */ return "nl_BE";
+ }
+ return "nl";
+ case 0x66: /* EDO */ return "bin_NG";
+ case LANG_ENGLISH:
+ switch (sub)
+ {
+ /* SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. Heh. I thought
+ * English was the language spoken in England.
+ * Oh well.
+ */
+ case SUBLANG_ENGLISH_US: return "en_US";
+ case SUBLANG_ENGLISH_UK: return "en_GB";
+ case SUBLANG_ENGLISH_AUS: return "en_AU";
+ case SUBLANG_ENGLISH_CAN: return "en_CA";
+ case SUBLANG_ENGLISH_NZ: return "en_NZ";
+ case SUBLANG_ENGLISH_EIRE: return "en_IE";
+ case SUBLANG_ENGLISH_SOUTH_AFRICA: return "en_ZA";
+ case SUBLANG_ENGLISH_JAMAICA: return "en_JM";
+ case SUBLANG_ENGLISH_CARIBBEAN: return "en_GD"; /* Grenada? */
+ case SUBLANG_ENGLISH_BELIZE: return "en_BZ";
+ case SUBLANG_ENGLISH_TRINIDAD: return "en_TT";
+ case SUBLANG_ENGLISH_ZIMBABWE: return "en_ZW";
+ case SUBLANG_ENGLISH_PHILIPPINES: return "en_PH";
+ }
+ return "en";
+ case LANG_ESTONIAN: return "et_EE";
+ case LANG_FAEROESE: return "fo_FO";
+ case LANG_FARSI: return "fa_IR";
+ case LANG_FINNISH: return "fi_FI";
+ case LANG_FRENCH:
+ switch (sub)
+ {
+ case SUBLANG_FRENCH: return "fr_FR";
+ case SUBLANG_FRENCH_BELGIAN: /* WALLOON */ return "fr_BE";
+ case SUBLANG_FRENCH_CANADIAN: return "fr_CA";
+ case SUBLANG_FRENCH_SWISS: return "fr_CH";
+ case SUBLANG_FRENCH_LUXEMBOURG: return "fr_LU";
+ case SUBLANG_FRENCH_MONACO: return "fr_MC";
+ }
+ return "fr";
+ case 0x62: /* FRISIAN */ return "fy_NL";
+ case 0x67: /* FULFULDE */ return "ful_NG";
+ case 0x3c: /* GAELIC */
+ switch (sub)
+ {
+ case 0x01: /* SCOTTISH */ return "gd_GB";
+ case 0x02: /* IRISH */ return "ga_IE";
+ }
+ return "C";
+ case LANG_GALICIAN: return "gl_ES";
+ case LANG_GEORGIAN: return "ka_GE";
+ case LANG_GERMAN:
+ switch (sub)
+ {
+ case SUBLANG_GERMAN: return "de_DE";
+ case SUBLANG_GERMAN_SWISS: return "de_CH";
+ case SUBLANG_GERMAN_AUSTRIAN: return "de_AT";
+ case SUBLANG_GERMAN_LUXEMBOURG: return "de_LU";
+ case SUBLANG_GERMAN_LIECHTENSTEIN: return "de_LI";
+ }
+ return "de";
+ case LANG_GREEK: return "el_GR";
+ case 0x74: /* GUARANI */ return "gn_PY";
+ case LANG_GUJARATI: return "gu_IN";
+ case 0x68: /* HAUSA */ return "ha_NG";
+ case 0x75: /* HAWAIIAN */
+ /* FIXME: Do they mean Hawaiian ("haw_US", 1000 speakers)
+ or Hawaii Creole English ("cpe_US", 600000 speakers)? */
+ return "cpe_US";
+ case LANG_HEBREW: return "he_IL";
+ case LANG_HINDI: return "hi_IN";
+ case LANG_HUNGARIAN: return "hu_HU";
+ case 0x69: /* IBIBIO */ return "nic_NG";
+ case LANG_ICELANDIC: return "is_IS";
+ case 0x70: /* IGBO */ return "ibo_NG";
+ case LANG_INDONESIAN: return "id_ID";
+ case 0x5d: /* INUKTITUT */ return "iu_CA";
+ case LANG_ITALIAN:
+ switch (sub)
+ {
+ case SUBLANG_ITALIAN: return "it_IT";
+ case SUBLANG_ITALIAN_SWISS: return "it_CH";
+ }
+ return "it";
+ case LANG_JAPANESE: return "ja_JP";
+ case LANG_KANNADA: return "kn_IN";
+ case 0x71: /* KANURI */ return "kau_NG";
+ case LANG_KASHMIRI:
+ switch (sub)
+ {
+ case SUBLANG_DEFAULT: return "ks_PK";
+ case SUBLANG_KASHMIRI_INDIA: return "ks_IN";
+ }
+ return "ks";
+ case LANG_KAZAK: return "kk_KZ";
+ case LANG_KONKANI:
+ /* FIXME: Adjust this when such locales appear on Unix. */
+ return "kok_IN";
+ case LANG_KOREAN: return "ko_KR";
+ case LANG_KYRGYZ: return "ky_KG";
+ case 0x54: /* LAO */ return "lo_LA";
+ case 0x76: /* LATIN */ return "la_VA";
+ case LANG_LATVIAN: return "lv_LV";
+ case LANG_LITHUANIAN: return "lt_LT";
+ case LANG_MACEDONIAN: return "mk_MK";
+ case LANG_MALAY:
+ switch (sub)
+ {
+ case SUBLANG_MALAY_MALAYSIA: return "ms_MY";
+ case SUBLANG_MALAY_BRUNEI_DARUSSALAM: return "ms_BN";
+ }
+ return "ms";
+ case LANG_MALAYALAM: return "ml_IN";
+ case 0x3a: /* MALTESE */ return "mt_MT";
+ case LANG_MANIPURI:
+ /* FIXME: Adjust this when such locales appear on Unix. */
+ return "mni_IN";
+ case LANG_MARATHI: return "mr_IN";
+ case LANG_MONGOLIAN:
+ return "mn"; /* Ambiguous: could be "mn_CN" or "mn_MN". */
+ case LANG_NEPALI:
+ switch (sub)
+ {
+ case SUBLANG_DEFAULT: return "ne_NP";
+ case SUBLANG_NEPALI_INDIA: return "ne_IN";
+ }
+ return "ne";
+ case LANG_NORWEGIAN:
+ switch (sub)
+ {
+ case SUBLANG_NORWEGIAN_BOKMAL: return "no_NO";
+ case SUBLANG_NORWEGIAN_NYNORSK: return "nn_NO";
+ }
+ return "no";
+ case LANG_ORIYA: return "or_IN";
+ case 0x72: /* OROMO */ return "om_ET";
+ case 0x79: /* PAPIAMENTU */ return "pap_AN";
+ case 0x63: /* PASHTO */
+ return "ps"; /* Ambiguous: could be "ps_PK" or "ps_AF". */
+ case LANG_POLISH: return "pl_PL";
+ case LANG_PORTUGUESE:
+ switch (sub)
+ {
+ case SUBLANG_PORTUGUESE: return "pt_PT";
+ /* Hmm. SUBLANG_PORTUGUESE_BRAZILIAN == SUBLANG_DEFAULT.
+ Same phenomenon as SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. */
+ case SUBLANG_PORTUGUESE_BRAZILIAN: return "pt_BR";
+ }
+ return "pt";
+ case LANG_PUNJABI: return "pa_IN";
+ case 0x17: /* RHAETO-ROMANCE */ return "rm_CH";
+ case LANG_ROMANIAN: return "ro_RO";
+ case LANG_RUSSIAN:
+ return "ru"; /* Ambiguous: could be "ru_RU" or "ru_UA". */
+ case 0x3b: /* SAMI */ return "se_NO";
+ case LANG_SANSKRIT: return "sa_IN";
+ case LANG_SINDHI: return "sd";
+ case 0x5b: /* SINHALESE */ return "si_LK";
+ case LANG_SLOVAK: return "sk_SK";
+ case LANG_SLOVENIAN: return "sl_SI";
+ case 0x77: /* SOMALI */ return "so_SO";
+ case LANG_SORBIAN:
+ /* FIXME: Adjust this when such locales appear on Unix. */
+ return "wen_DE";
+ case LANG_SPANISH:
+ switch (sub)
+ {
+ case SUBLANG_SPANISH: return "es_ES";
+ case SUBLANG_SPANISH_MEXICAN: return "es_MX";
+ case SUBLANG_SPANISH_MODERN:
+ return "es_ES@modern"; /* not seen on Unix */
+ case SUBLANG_SPANISH_GUATEMALA: return "es_GT";
+ case SUBLANG_SPANISH_COSTA_RICA: return "es_CR";
+ case SUBLANG_SPANISH_PANAMA: return "es_PA";
+ case SUBLANG_SPANISH_DOMINICAN_REPUBLIC: return "es_DO";
+ case SUBLANG_SPANISH_VENEZUELA: return "es_VE";
+ case SUBLANG_SPANISH_COLOMBIA: return "es_CO";
+ case SUBLANG_SPANISH_PERU: return "es_PE";
+ case SUBLANG_SPANISH_ARGENTINA: return "es_AR";
+ case SUBLANG_SPANISH_ECUADOR: return "es_EC";
+ case SUBLANG_SPANISH_CHILE: return "es_CL";
+ case SUBLANG_SPANISH_URUGUAY: return "es_UY";
+ case SUBLANG_SPANISH_PARAGUAY: return "es_PY";
+ case SUBLANG_SPANISH_BOLIVIA: return "es_BO";
+ case SUBLANG_SPANISH_EL_SALVADOR: return "es_SV";
+ case SUBLANG_SPANISH_HONDURAS: return "es_HN";
+ case SUBLANG_SPANISH_NICARAGUA: return "es_NI";
+ case SUBLANG_SPANISH_PUERTO_RICO: return "es_PR";
+ }
+ return "es";
+ case 0x30: /* SUTU */ return "bnt_TZ";
+ case LANG_SWAHILI: return "sw_KE";
+ case LANG_SWEDISH:
+ switch (sub)
+ {
+ case SUBLANG_DEFAULT: return "sv_SE";
+ case SUBLANG_SWEDISH_FINLAND: return "sv_FI";
+ }
+ return "sv";
+ case LANG_SYRIAC: return "syr_TR"; /* An extinct language. */
+ case 0x64: /* TAGALOG */ return "tl_PH";
+ case 0x28: /* TAJIK */ return "tg_TJ";
+ case 0x5f: /* TAMAZIGHT */ return "ber_MA";
+ case LANG_TAMIL:
+ return "ta"; /* Ambiguous: could be "ta_IN" or "ta_LK" or "ta_SG". */
+ case LANG_TATAR: return "tt_RU";
+ case LANG_TELUGU: return "te_IN";
+ case LANG_THAI: return "th_TH";
+ case 0x51: /* TIBETAN */ return "bo_CN";
+ case 0x73: /* TIGRINYA */ return "ti_ET";
+ case 0x31: /* TSONGA */ return "ts_ZA";
+ case LANG_TURKISH: return "tr_TR";
+ case 0x42: /* TURKMEN */ return "tk_TM";
+ case LANG_UKRAINIAN: return "uk_UA";
+ case LANG_URDU:
+ switch (sub)
+ {
+ case SUBLANG_URDU_PAKISTAN: return "ur_PK";
+ case SUBLANG_URDU_INDIA: return "ur_IN";
+ }
+ return "ur";
+ case LANG_UZBEK:
+ switch (sub)
+ {
+ /* FIXME: Adjust this when Uzbek locales appear on Unix. */
+ case SUBLANG_UZBEK_LATIN: return "uz_UZ@latin";
+ case SUBLANG_UZBEK_CYRILLIC: return "uz_UZ@cyrillic";
+ }
+ return "uz";
+ case 0x33: /* VENDA */ return "ven_ZA";
+ case LANG_VIETNAMESE: return "vi_VN";
+ case 0x52: /* WELSH */ return "cy_GB";
+ case 0x34: /* XHOSA */ return "xh_ZA";
+ case 0x78: /* YI */ return "sit_CN";
+ case 0x3d: /* YIDDISH */ return "yi_IL";
+ case 0x6a: /* YORUBA */ return "yo_NG";
+ case 0x35: /* ZULU */ return "zu_ZA";
+ default: return "C";
+ }
+
+#endif
+}
--- /dev/null
+/* Log file output.
+ Copyright (C) 2003 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* Written by Bruno Haible <bruno@clisp.org>. */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+/* Print an ASCII string with quotes and escape sequences where needed. */
+static void
+print_escaped (stream, str)
+ FILE *stream;
+ const char *str;
+{
+ putc ('"', stream);
+ for (; *str != '\0'; str++)
+ if (*str == '\n')
+ {
+ fputs ("\\n\"", stream);
+ if (str[1] == '\0')
+ return;
+ fputs ("\n\"", stream);
+ }
+ else
+ {
+ if (*str == '"' || *str == '\\')
+ putc ('\\', stream);
+ putc (*str, stream);
+ }
+ putc ('"', stream);
+}
+
+/* Add to the log file an entry denoting a failed translation. */
+void
+_nl_log_untranslated (logfilename, domainname, msgid1, msgid2, plural)
+ const char *logfilename;
+ const char *domainname;
+ const char *msgid1;
+ const char *msgid2;
+ int plural;
+{
+ static char *last_logfilename = NULL;
+ static FILE *last_logfile = NULL;
+ FILE *logfile;
+
+ /* Can we reuse the last opened logfile? */
+ if (last_logfilename == NULL || strcmp (logfilename, last_logfilename) != 0)
+ {
+ /* Close the last used logfile. */
+ if (last_logfilename != NULL)
+ {
+ if (last_logfile != NULL)
+ {
+ fclose (last_logfile);
+ last_logfile = NULL;
+ }
+ free (last_logfilename);
+ last_logfilename = NULL;
+ }
+ /* Open the logfile. */
+ last_logfilename = (char *) malloc (strlen (logfilename) + 1);
+ if (last_logfilename == NULL)
+ return;
+ strcpy (last_logfilename, logfilename);
+ last_logfile = fopen (logfilename, "a");
+ if (last_logfile == NULL)
+ return;
+ }
+ logfile = last_logfile;
+
+ fprintf (logfile, "domain ");
+ print_escaped (logfile, domainname);
+ fprintf (logfile, "\nmsgid ");
+ print_escaped (logfile, msgid1);
+ if (plural)
+ {
+ fprintf (logfile, "\nmsgid_plural ");
+ print_escaped (logfile, msgid2);
+ fprintf (logfile, "\nmsgstr[0] \"\"\n");
+ }
+ else
+ fprintf (logfile, "\nmsgstr \"\"\n");
+ putc ('\n', logfile);
+}
--- /dev/null
+/* Implementation of ngettext(3) function.
+ Copyright (C) 1995, 1997, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#ifdef _LIBC
+# define __need_NULL
+# include <stddef.h>
+#else
+# include <stdlib.h> /* Just for NULL. */
+#endif
+
+#include "gettextP.h"
+#ifdef _LIBC
+# include <libintl.h>
+#else
+# include "libgnuintl.h"
+#endif
+
+#include <locale.h>
+
+/* @@ end of prolog @@ */
+
+/* Names for the libintl functions are a problem. They must not clash
+ with existing names and they should follow ANSI C. But this source
+ code is also used in GNU C Library where the names have a __
+ prefix. So we have to make a difference here. */
+#ifdef _LIBC
+# define NGETTEXT __ngettext
+# define DCNGETTEXT __dcngettext
+#else
+# define NGETTEXT libintl_ngettext
+# define DCNGETTEXT libintl_dcngettext
+#endif
+
+/* Look up MSGID in the current default message catalog for the current
+ LC_MESSAGES locale. If not found, returns MSGID itself (the default
+ text). */
+char *
+NGETTEXT (msgid1, msgid2, n)
+ const char *msgid1;
+ const char *msgid2;
+ unsigned long int n;
+{
+ return DCNGETTEXT (NULL, msgid1, msgid2, n, LC_MESSAGES);
+}
+
+#ifdef _LIBC
+/* Alias for function name in GNU C Library. */
+weak_alias (__ngettext, ngettext);
+#endif
--- /dev/null
+/* OS/2 compatibility functions.
+ Copyright (C) 2001-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#define OS2_AWARE
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <sys/param.h>
+
+/* A version of getenv() that works from DLLs */
+extern unsigned long DosScanEnv (const unsigned char *pszName, unsigned char **ppszValue);
+
+char *
+_nl_getenv (const char *name)
+{
+ unsigned char *value;
+ if (DosScanEnv (name, &value))
+ return NULL;
+ else
+ return value;
+}
+
+/* A fixed size buffer. */
+char libintl_nl_default_dirname[MAXPATHLEN+1];
+
+char *_nlos2_libdir = NULL;
+char *_nlos2_localealiaspath = NULL;
+char *_nlos2_localedir = NULL;
+
+static __attribute__((constructor)) void
+nlos2_initialize ()
+{
+ char *root = getenv ("UNIXROOT");
+ char *gnulocaledir = getenv ("GNULOCALEDIR");
+
+ _nlos2_libdir = gnulocaledir;
+ if (!_nlos2_libdir)
+ {
+ if (root)
+ {
+ size_t sl = strlen (root);
+ _nlos2_libdir = (char *) malloc (sl + strlen (LIBDIR) + 1);
+ memcpy (_nlos2_libdir, root, sl);
+ memcpy (_nlos2_libdir + sl, LIBDIR, strlen (LIBDIR) + 1);
+ }
+ else
+ _nlos2_libdir = LIBDIR;
+ }
+
+ _nlos2_localealiaspath = gnulocaledir;
+ if (!_nlos2_localealiaspath)
+ {
+ if (root)
+ {
+ size_t sl = strlen (root);
+ _nlos2_localealiaspath = (char *) malloc (sl + strlen (LOCALE_ALIAS_PATH) + 1);
+ memcpy (_nlos2_localealiaspath, root, sl);
+ memcpy (_nlos2_localealiaspath + sl, LOCALE_ALIAS_PATH, strlen (LOCALE_ALIAS_PATH) + 1);
+ }
+ else
+ _nlos2_localealiaspath = LOCALE_ALIAS_PATH;
+ }
+
+ _nlos2_localedir = gnulocaledir;
+ if (!_nlos2_localedir)
+ {
+ if (root)
+ {
+ size_t sl = strlen (root);
+ _nlos2_localedir = (char *) malloc (sl + strlen (LOCALEDIR) + 1);
+ memcpy (_nlos2_localedir, root, sl);
+ memcpy (_nlos2_localedir + sl, LOCALEDIR, strlen (LOCALEDIR) + 1);
+ }
+ else
+ _nlos2_localedir = LOCALEDIR;
+ }
+
+ if (strlen (_nlos2_localedir) <= MAXPATHLEN)
+ strcpy (libintl_nl_default_dirname, _nlos2_localedir);
+}
--- /dev/null
+/* OS/2 compatibility defines.
+ This file is intended to be included from config.h
+ Copyright (C) 2001-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* When included from os2compat.h we need all the original definitions */
+#ifndef OS2_AWARE
+
+#undef LIBDIR
+#define LIBDIR _nlos2_libdir
+extern char *_nlos2_libdir;
+
+#undef LOCALEDIR
+#define LOCALEDIR _nlos2_localedir
+extern char *_nlos2_localedir;
+
+#undef LOCALE_ALIAS_PATH
+#define LOCALE_ALIAS_PATH _nlos2_localealiaspath
+extern char *_nlos2_localealiaspath;
+
+#endif
+
+#undef HAVE_STRCASECMP
+#define HAVE_STRCASECMP 1
+#define strcasecmp stricmp
+#define strncasecmp strnicmp
+
+/* We have our own getenv() which works even if library is compiled as DLL */
+#define getenv _nl_getenv
+
+/* Older versions of gettext used -1 as the value of LC_MESSAGES */
+#define LC_MESSAGES_COMPAT (-1)
--- /dev/null
+/* OS dependent parts of libintl.
+ Copyright (C) 2001-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#if defined __EMX__
+# include "os2compat.c"
+#else
+/* Avoid AIX compiler warning. */
+typedef int dummy;
+#endif
--- /dev/null
+/* Expression parsing for plural form selection.
+ Copyright (C) 2000, 2001 Free Software Foundation, Inc.
+ Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <ctype.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "plural-exp.h"
+
+#if (defined __GNUC__ && !defined __APPLE_CC__) \
+ || (defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L)
+
+/* These structs are the constant expression for the germanic plural
+ form determination. It represents the expression "n != 1". */
+static const struct expression plvar =
+{
+ .nargs = 0,
+ .operation = var,
+};
+static const struct expression plone =
+{
+ .nargs = 0,
+ .operation = num,
+ .val =
+ {
+ .num = 1
+ }
+};
+struct expression GERMANIC_PLURAL =
+{
+ .nargs = 2,
+ .operation = not_equal,
+ .val =
+ {
+ .args =
+ {
+ [0] = (struct expression *) &plvar,
+ [1] = (struct expression *) &plone
+ }
+ }
+};
+
+# define INIT_GERMANIC_PLURAL()
+
+#else
+
+/* For compilers without support for ISO C 99 struct/union initializers:
+ Initialization at run-time. */
+
+static struct expression plvar;
+static struct expression plone;
+struct expression GERMANIC_PLURAL;
+
+static void
+init_germanic_plural ()
+{
+ if (plone.val.num == 0)
+ {
+ plvar.nargs = 0;
+ plvar.operation = var;
+
+ plone.nargs = 0;
+ plone.operation = num;
+ plone.val.num = 1;
+
+ GERMANIC_PLURAL.nargs = 2;
+ GERMANIC_PLURAL.operation = not_equal;
+ GERMANIC_PLURAL.val.args[0] = &plvar;
+ GERMANIC_PLURAL.val.args[1] = &plone;
+ }
+}
+
+# define INIT_GERMANIC_PLURAL() init_germanic_plural ()
+
+#endif
+
+void
+internal_function
+EXTRACT_PLURAL_EXPRESSION (nullentry, pluralp, npluralsp)
+ const char *nullentry;
+ struct expression **pluralp;
+ unsigned long int *npluralsp;
+{
+ if (nullentry != NULL)
+ {
+ const char *plural;
+ const char *nplurals;
+
+ plural = strstr (nullentry, "plural=");
+ nplurals = strstr (nullentry, "nplurals=");
+ if (plural == NULL || nplurals == NULL)
+ goto no_plural;
+ else
+ {
+ char *endp;
+ unsigned long int n;
+ struct parse_args args;
+
+ /* First get the number. */
+ nplurals += 9;
+ while (*nplurals != '\0' && isspace ((unsigned char) *nplurals))
+ ++nplurals;
+ if (!(*nplurals >= '0' && *nplurals <= '9'))
+ goto no_plural;
+#if defined HAVE_STRTOUL || defined _LIBC
+ n = strtoul (nplurals, &endp, 10);
+#else
+ for (endp = nplurals, n = 0; *endp >= '0' && *endp <= '9'; endp++)
+ n = n * 10 + (*endp - '0');
+#endif
+ if (nplurals == endp)
+ goto no_plural;
+ *npluralsp = n;
+
+ /* Due to the restrictions bison imposes onto the interface of the
+ scanner function we have to put the input string and the result
+ passed up from the parser into the same structure which address
+ is passed down to the parser. */
+ plural += 7;
+ args.cp = plural;
+ if (PLURAL_PARSE (&args) != 0)
+ goto no_plural;
+ *pluralp = args.res;
+ }
+ }
+ else
+ {
+ /* By default we are using the Germanic form: singular form only
+ for `one', the plural form otherwise. Yes, this is also what
+ English is using since English is a Germanic language. */
+ no_plural:
+ INIT_GERMANIC_PLURAL ();
+ *pluralp = &GERMANIC_PLURAL;
+ *npluralsp = 2;
+ }
+}
--- /dev/null
+/* Expression parsing and evaluation for plural form selection.
+ Copyright (C) 2000, 2001, 2002 Free Software Foundation, Inc.
+ Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _PLURAL_EXP_H
+#define _PLURAL_EXP_H
+
+#ifndef PARAMS
+# if __STDC__ || defined __GNUC__ || defined __SUNPRO_C || defined __cplusplus || __PROTOTYPES
+# define PARAMS(args) args
+# else
+# define PARAMS(args) ()
+# endif
+#endif
+
+#ifndef internal_function
+# define internal_function
+#endif
+
+#ifndef attribute_hidden
+# define attribute_hidden
+#endif
+
+
+/* This is the representation of the expressions to determine the
+ plural form. */
+struct expression
+{
+ int nargs; /* Number of arguments. */
+ enum operator
+ {
+ /* Without arguments: */
+ var, /* The variable "n". */
+ num, /* Decimal number. */
+ /* Unary operators: */
+ lnot, /* Logical NOT. */
+ /* Binary operators: */
+ mult, /* Multiplication. */
+ divide, /* Division. */
+ module, /* Modulo operation. */
+ plus, /* Addition. */
+ minus, /* Subtraction. */
+ less_than, /* Comparison. */
+ greater_than, /* Comparison. */
+ less_or_equal, /* Comparison. */
+ greater_or_equal, /* Comparison. */
+ equal, /* Comparison for equality. */
+ not_equal, /* Comparison for inequality. */
+ land, /* Logical AND. */
+ lor, /* Logical OR. */
+ /* Ternary operators: */
+ qmop /* Question mark operator. */
+ } operation;
+ union
+ {
+ unsigned long int num; /* Number value for `num'. */
+ struct expression *args[3]; /* Up to three arguments. */
+ } val;
+};
+
+/* This is the data structure to pass information to the parser and get
+ the result in a thread-safe way. */
+struct parse_args
+{
+ const char *cp;
+ struct expression *res;
+};
+
+
+/* Names for the libintl functions are a problem. This source code is used
+ 1. in the GNU C Library library,
+ 2. in the GNU libintl library,
+ 3. in the GNU gettext tools.
+ The function names in each situation must be different, to allow for
+ binary incompatible changes in 'struct expression'. Furthermore,
+ 1. in the GNU C Library library, the names have a __ prefix,
+ 2.+3. in the GNU libintl library and in the GNU gettext tools, the names
+ must follow ANSI C and not start with __.
+ So we have to distinguish the three cases. */
+#ifdef _LIBC
+# define FREE_EXPRESSION __gettext_free_exp
+# define PLURAL_PARSE __gettextparse
+# define GERMANIC_PLURAL __gettext_germanic_plural
+# define EXTRACT_PLURAL_EXPRESSION __gettext_extract_plural
+#elif defined (IN_LIBINTL)
+# define FREE_EXPRESSION libintl_gettext_free_exp
+# define PLURAL_PARSE libintl_gettextparse
+# define GERMANIC_PLURAL libintl_gettext_germanic_plural
+# define EXTRACT_PLURAL_EXPRESSION libintl_gettext_extract_plural
+#else
+# define FREE_EXPRESSION free_plural_expression
+# define PLURAL_PARSE parse_plural_expression
+# define GERMANIC_PLURAL germanic_plural
+# define EXTRACT_PLURAL_EXPRESSION extract_plural_expression
+#endif
+
+extern void FREE_EXPRESSION PARAMS ((struct expression *exp))
+ internal_function;
+extern int PLURAL_PARSE PARAMS ((void *arg));
+extern struct expression GERMANIC_PLURAL attribute_hidden;
+extern void EXTRACT_PLURAL_EXPRESSION PARAMS ((const char *nullentry,
+ struct expression **pluralp,
+ unsigned long int *npluralsp))
+ internal_function;
+
+#if !defined (_LIBC) && !defined (IN_LIBINTL)
+extern unsigned long int plural_eval PARAMS ((struct expression *pexp,
+ unsigned long int n));
+#endif
+
+#endif /* _PLURAL_EXP_H */
--- /dev/null
+/* A Bison parser, made from plural.y
+ by GNU bison 1.35. */
+
+#define YYBISON 1 /* Identify Bison output. */
+
+#define yyparse __gettextparse
+#define yylex __gettextlex
+#define yyerror __gettexterror
+#define yylval __gettextlval
+#define yychar __gettextchar
+#define yydebug __gettextdebug
+#define yynerrs __gettextnerrs
+# define EQUOP2 257
+# define CMPOP2 258
+# define ADDOP2 259
+# define MULOP2 260
+# define NUMBER 261
+
+#line 1 "plural.y"
+
+/* Expression parsing for plural form selection.
+ Copyright (C) 2000, 2001 Free Software Foundation, Inc.
+ Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* The bison generated parser uses alloca. AIX 3 forces us to put this
+ declaration at the beginning of the file. The declaration in bison's
+ skeleton file comes too late. This must come before <config.h>
+ because <config.h> may include arbitrary system headers. */
+#if defined _AIX && !defined __GNUC__
+ #pragma alloca
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stddef.h>
+#include <stdlib.h>
+#include "plural-exp.h"
+
+/* The main function generated by the parser is called __gettextparse,
+ but we want it to be called PLURAL_PARSE. */
+#ifndef _LIBC
+# define __gettextparse PLURAL_PARSE
+#endif
+
+#define YYLEX_PARAM &((struct parse_args *) arg)->cp
+#define YYPARSE_PARAM arg
+
+#line 49 "plural.y"
+#ifndef YYSTYPE
+typedef union {
+ unsigned long int num;
+ enum operator op;
+ struct expression *exp;
+} yystype;
+# define YYSTYPE yystype
+# define YYSTYPE_IS_TRIVIAL 1
+#endif
+#line 55 "plural.y"
+
+/* Prototypes for local functions. */
+static struct expression *new_exp PARAMS ((int nargs, enum operator op,
+ struct expression * const *args));
+static inline struct expression *new_exp_0 PARAMS ((enum operator op));
+static inline struct expression *new_exp_1 PARAMS ((enum operator op,
+ struct expression *right));
+static struct expression *new_exp_2 PARAMS ((enum operator op,
+ struct expression *left,
+ struct expression *right));
+static inline struct expression *new_exp_3 PARAMS ((enum operator op,
+ struct expression *bexp,
+ struct expression *tbranch,
+ struct expression *fbranch));
+static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
+static void yyerror PARAMS ((const char *str));
+
+/* Allocation of expressions. */
+
+static struct expression *
+new_exp (nargs, op, args)
+ int nargs;
+ enum operator op;
+ struct expression * const *args;
+{
+ int i;
+ struct expression *newp;
+
+ /* If any of the argument could not be malloc'ed, just return NULL. */
+ for (i = nargs - 1; i >= 0; i--)
+ if (args[i] == NULL)
+ goto fail;
+
+ /* Allocate a new expression. */
+ newp = (struct expression *) malloc (sizeof (*newp));
+ if (newp != NULL)
+ {
+ newp->nargs = nargs;
+ newp->operation = op;
+ for (i = nargs - 1; i >= 0; i--)
+ newp->val.args[i] = args[i];
+ return newp;
+ }
+
+ fail:
+ for (i = nargs - 1; i >= 0; i--)
+ FREE_EXPRESSION (args[i]);
+
+ return NULL;
+}
+
+static inline struct expression *
+new_exp_0 (op)
+ enum operator op;
+{
+ return new_exp (0, op, NULL);
+}
+
+static inline struct expression *
+new_exp_1 (op, right)
+ enum operator op;
+ struct expression *right;
+{
+ struct expression *args[1];
+
+ args[0] = right;
+ return new_exp (1, op, args);
+}
+
+static struct expression *
+new_exp_2 (op, left, right)
+ enum operator op;
+ struct expression *left;
+ struct expression *right;
+{
+ struct expression *args[2];
+
+ args[0] = left;
+ args[1] = right;
+ return new_exp (2, op, args);
+}
+
+static inline struct expression *
+new_exp_3 (op, bexp, tbranch, fbranch)
+ enum operator op;
+ struct expression *bexp;
+ struct expression *tbranch;
+ struct expression *fbranch;
+{
+ struct expression *args[3];
+
+ args[0] = bexp;
+ args[1] = tbranch;
+ args[2] = fbranch;
+ return new_exp (3, op, args);
+}
+
+#ifndef YYDEBUG
+# define YYDEBUG 0
+#endif
+
+
+
+#define YYFINAL 27
+#define YYFLAG -32768
+#define YYNTBASE 16
+
+/* YYTRANSLATE(YYLEX) -- Bison token number corresponding to YYLEX. */
+#define YYTRANSLATE(x) ((unsigned)(x) <= 261 ? yytranslate[x] : 18)
+
+/* YYTRANSLATE[YYLEX] -- Bison token number corresponding to YYLEX. */
+static const char yytranslate[] =
+{
+ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 10, 2, 2, 2, 2, 5, 2,
+ 14, 15, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 12, 2,
+ 2, 2, 2, 3, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 13, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 4, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 2, 1, 6, 7, 8,
+ 9, 11
+};
+
+#if YYDEBUG
+static const short yyprhs[] =
+{
+ 0, 0, 2, 8, 12, 16, 20, 24, 28, 32,
+ 35, 37, 39
+};
+static const short yyrhs[] =
+{
+ 17, 0, 17, 3, 17, 12, 17, 0, 17, 4,
+ 17, 0, 17, 5, 17, 0, 17, 6, 17, 0,
+ 17, 7, 17, 0, 17, 8, 17, 0, 17, 9,
+ 17, 0, 10, 17, 0, 13, 0, 11, 0, 14,
+ 17, 15, 0
+};
+
+#endif
+
+#if YYDEBUG
+/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
+static const short yyrline[] =
+{
+ 0, 174, 182, 186, 190, 194, 198, 202, 206, 210,
+ 214, 218, 223
+};
+#endif
+
+
+#if (YYDEBUG) || defined YYERROR_VERBOSE
+
+/* YYTNAME[TOKEN_NUM] -- String name of the token TOKEN_NUM. */
+static const char *const yytname[] =
+{
+ "$", "error", "$undefined.", "'?'", "'|'", "'&'", "EQUOP2", "CMPOP2",
+ "ADDOP2", "MULOP2", "'!'", "NUMBER", "':'", "'n'", "'('", "')'",
+ "start", "exp", 0
+};
+#endif
+
+/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
+static const short yyr1[] =
+{
+ 0, 16, 17, 17, 17, 17, 17, 17, 17, 17,
+ 17, 17, 17
+};
+
+/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
+static const short yyr2[] =
+{
+ 0, 1, 5, 3, 3, 3, 3, 3, 3, 2,
+ 1, 1, 3
+};
+
+/* YYDEFACT[S] -- default rule to reduce with in state S when YYTABLE
+ doesn't specify something else to do. Zero means the default is an
+ error. */
+static const short yydefact[] =
+{
+ 0, 0, 11, 10, 0, 1, 9, 0, 0, 0,
+ 0, 0, 0, 0, 0, 12, 0, 3, 4, 5,
+ 6, 7, 8, 0, 2, 0, 0, 0
+};
+
+static const short yydefgoto[] =
+{
+ 25, 5
+};
+
+static const short yypact[] =
+{
+ -9, -9,-32768,-32768, -9, 34,-32768, 11, -9, -9,
+ -9, -9, -9, -9, -9,-32768, 24, 39, 43, 16,
+ 26, -3,-32768, -9, 34, 21, 53,-32768
+};
+
+static const short yypgoto[] =
+{
+ -32768, -1
+};
+
+
+#define YYLAST 53
+
+
+static const short yytable[] =
+{
+ 6, 1, 2, 7, 3, 4, 14, 16, 17, 18,
+ 19, 20, 21, 22, 8, 9, 10, 11, 12, 13,
+ 14, 26, 24, 12, 13, 14, 15, 8, 9, 10,
+ 11, 12, 13, 14, 13, 14, 23, 8, 9, 10,
+ 11, 12, 13, 14, 10, 11, 12, 13, 14, 11,
+ 12, 13, 14, 27
+};
+
+static const short yycheck[] =
+{
+ 1, 10, 11, 4, 13, 14, 9, 8, 9, 10,
+ 11, 12, 13, 14, 3, 4, 5, 6, 7, 8,
+ 9, 0, 23, 7, 8, 9, 15, 3, 4, 5,
+ 6, 7, 8, 9, 8, 9, 12, 3, 4, 5,
+ 6, 7, 8, 9, 5, 6, 7, 8, 9, 6,
+ 7, 8, 9, 0
+};
+#define YYPURE 1
+
+/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
+#line 3 "/usr/local/share/bison/bison.simple"
+
+/* Skeleton output parser for bison,
+
+ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002 Free Software
+ Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+/* As a special exception, when this file is copied by Bison into a
+ Bison output file, you may use that output file without restriction.
+ This special exception was added by the Free Software Foundation
+ in version 1.24 of Bison. */
+
+/* This is the parser code that is written into each bison parser when
+ the %semantic_parser declaration is not specified in the grammar.
+ It was written by Richard Stallman by simplifying the hairy parser
+ used when %semantic_parser is specified. */
+
+/* All symbols defined below should begin with yy or YY, to avoid
+ infringing on user name space. This should be done even for local
+ variables, as they might otherwise be expanded by user macros.
+ There are some unavoidable exceptions within include files to
+ define necessary library symbols; they are noted "INFRINGES ON
+ USER NAME SPACE" below. */
+
+#if ! defined (yyoverflow) || defined (YYERROR_VERBOSE)
+
+/* The parser invokes alloca or malloc; define the necessary symbols. */
+
+# if YYSTACK_USE_ALLOCA
+# define YYSTACK_ALLOC alloca
+# else
+# ifndef YYSTACK_USE_ALLOCA
+# if defined (alloca) || defined (_ALLOCA_H)
+# define YYSTACK_ALLOC alloca
+# else
+# ifdef __GNUC__
+# define YYSTACK_ALLOC __builtin_alloca
+# endif
+# endif
+# endif
+# endif
+
+# ifdef YYSTACK_ALLOC
+ /* Pacify GCC's `empty if-body' warning. */
+# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
+# else
+# if defined (__STDC__) || defined (__cplusplus)
+# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
+# define YYSIZE_T size_t
+# endif
+# define YYSTACK_ALLOC malloc
+# define YYSTACK_FREE free
+# endif
+#endif /* ! defined (yyoverflow) || defined (YYERROR_VERBOSE) */
+
+
+#if (! defined (yyoverflow) \
+ && (! defined (__cplusplus) \
+ || (YYLTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
+
+/* A type that is properly aligned for any stack member. */
+union yyalloc
+{
+ short yyss;
+ YYSTYPE yyvs;
+# if YYLSP_NEEDED
+ YYLTYPE yyls;
+# endif
+};
+
+/* The size of the maximum gap between one aligned stack and the next. */
+# define YYSTACK_GAP_MAX (sizeof (union yyalloc) - 1)
+
+/* The size of an array large to enough to hold all stacks, each with
+ N elements. */
+# if YYLSP_NEEDED
+# define YYSTACK_BYTES(N) \
+ ((N) * (sizeof (short) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
+ + 2 * YYSTACK_GAP_MAX)
+# else
+# define YYSTACK_BYTES(N) \
+ ((N) * (sizeof (short) + sizeof (YYSTYPE)) \
+ + YYSTACK_GAP_MAX)
+# endif
+
+/* Copy COUNT objects from FROM to TO. The source and destination do
+ not overlap. */
+# ifndef YYCOPY
+# if 1 < __GNUC__
+# define YYCOPY(To, From, Count) \
+ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
+# else
+# define YYCOPY(To, From, Count) \
+ do \
+ { \
+ register YYSIZE_T yyi; \
+ for (yyi = 0; yyi < (Count); yyi++) \
+ (To)[yyi] = (From)[yyi]; \
+ } \
+ while (0)
+# endif
+# endif
+
+/* Relocate STACK from its old location to the new one. The
+ local variables YYSIZE and YYSTACKSIZE give the old and new number of
+ elements in the stack, and YYPTR gives the new location of the
+ stack. Advance YYPTR to a properly aligned location for the next
+ stack. */
+# define YYSTACK_RELOCATE(Stack) \
+ do \
+ { \
+ YYSIZE_T yynewbytes; \
+ YYCOPY (&yyptr->Stack, Stack, yysize); \
+ Stack = &yyptr->Stack; \
+ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAX; \
+ yyptr += yynewbytes / sizeof (*yyptr); \
+ } \
+ while (0)
+
+#endif
+
+
+#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
+# define YYSIZE_T __SIZE_TYPE__
+#endif
+#if ! defined (YYSIZE_T) && defined (size_t)
+# define YYSIZE_T size_t
+#endif
+#if ! defined (YYSIZE_T)
+# if defined (__STDC__) || defined (__cplusplus)
+# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
+# define YYSIZE_T size_t
+# endif
+#endif
+#if ! defined (YYSIZE_T)
+# define YYSIZE_T unsigned int
+#endif
+
+#define yyerrok (yyerrstatus = 0)
+#define yyclearin (yychar = YYEMPTY)
+#define YYEMPTY -2
+#define YYEOF 0
+#define YYACCEPT goto yyacceptlab
+#define YYABORT goto yyabortlab
+#define YYERROR goto yyerrlab1
+/* Like YYERROR except do call yyerror. This remains here temporarily
+ to ease the transition to the new meaning of YYERROR, for GCC.
+ Once GCC version 2 has supplanted version 1, this can go. */
+#define YYFAIL goto yyerrlab
+#define YYRECOVERING() (!!yyerrstatus)
+#define YYBACKUP(Token, Value) \
+do \
+ if (yychar == YYEMPTY && yylen == 1) \
+ { \
+ yychar = (Token); \
+ yylval = (Value); \
+ yychar1 = YYTRANSLATE (yychar); \
+ YYPOPSTACK; \
+ goto yybackup; \
+ } \
+ else \
+ { \
+ yyerror ("syntax error: cannot back up"); \
+ YYERROR; \
+ } \
+while (0)
+
+#define YYTERROR 1
+#define YYERRCODE 256
+
+
+/* YYLLOC_DEFAULT -- Compute the default location (before the actions
+ are run).
+
+ When YYLLOC_DEFAULT is run, CURRENT is set the location of the
+ first token. By default, to implement support for ranges, extend
+ its range to the last symbol. */
+
+#ifndef YYLLOC_DEFAULT
+# define YYLLOC_DEFAULT(Current, Rhs, N) \
+ Current.last_line = Rhs[N].last_line; \
+ Current.last_column = Rhs[N].last_column;
+#endif
+
+
+/* YYLEX -- calling `yylex' with the right arguments. */
+
+#if YYPURE
+# if YYLSP_NEEDED
+# ifdef YYLEX_PARAM
+# define YYLEX yylex (&yylval, &yylloc, YYLEX_PARAM)
+# else
+# define YYLEX yylex (&yylval, &yylloc)
+# endif
+# else /* !YYLSP_NEEDED */
+# ifdef YYLEX_PARAM
+# define YYLEX yylex (&yylval, YYLEX_PARAM)
+# else
+# define YYLEX yylex (&yylval)
+# endif
+# endif /* !YYLSP_NEEDED */
+#else /* !YYPURE */
+# define YYLEX yylex ()
+#endif /* !YYPURE */
+
+
+/* Enable debugging if requested. */
+#if YYDEBUG
+
+# ifndef YYFPRINTF
+# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
+# define YYFPRINTF fprintf
+# endif
+
+# define YYDPRINTF(Args) \
+do { \
+ if (yydebug) \
+ YYFPRINTF Args; \
+} while (0)
+/* Nonzero means print parse trace. It is left uninitialized so that
+ multiple parsers can coexist. */
+int yydebug;
+#else /* !YYDEBUG */
+# define YYDPRINTF(Args)
+#endif /* !YYDEBUG */
+
+/* YYINITDEPTH -- initial size of the parser's stacks. */
+#ifndef YYINITDEPTH
+# define YYINITDEPTH 200
+#endif
+
+/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
+ if the built-in stack extension method is used).
+
+ Do not make this value too large; the results are undefined if
+ SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
+ evaluated with infinite-precision integer arithmetic. */
+
+#if YYMAXDEPTH == 0
+# undef YYMAXDEPTH
+#endif
+
+#ifndef YYMAXDEPTH
+# define YYMAXDEPTH 10000
+#endif
+\f
+#ifdef YYERROR_VERBOSE
+
+# ifndef yystrlen
+# if defined (__GLIBC__) && defined (_STRING_H)
+# define yystrlen strlen
+# else
+/* Return the length of YYSTR. */
+static YYSIZE_T
+# if defined (__STDC__) || defined (__cplusplus)
+yystrlen (const char *yystr)
+# else
+yystrlen (yystr)
+ const char *yystr;
+# endif
+{
+ register const char *yys = yystr;
+
+ while (*yys++ != '\0')
+ continue;
+
+ return yys - yystr - 1;
+}
+# endif
+# endif
+
+# ifndef yystpcpy
+# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
+# define yystpcpy stpcpy
+# else
+/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
+ YYDEST. */
+static char *
+# if defined (__STDC__) || defined (__cplusplus)
+yystpcpy (char *yydest, const char *yysrc)
+# else
+yystpcpy (yydest, yysrc)
+ char *yydest;
+ const char *yysrc;
+# endif
+{
+ register char *yyd = yydest;
+ register const char *yys = yysrc;
+
+ while ((*yyd++ = *yys++) != '\0')
+ continue;
+
+ return yyd - 1;
+}
+# endif
+# endif
+#endif
+\f
+#line 315 "/usr/local/share/bison/bison.simple"
+
+
+/* The user can define YYPARSE_PARAM as the name of an argument to be passed
+ into yyparse. The argument should have type void *.
+ It should actually point to an object.
+ Grammar actions can access the variable by casting it
+ to the proper pointer type. */
+
+#ifdef YYPARSE_PARAM
+# if defined (__STDC__) || defined (__cplusplus)
+# define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
+# define YYPARSE_PARAM_DECL
+# else
+# define YYPARSE_PARAM_ARG YYPARSE_PARAM
+# define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
+# endif
+#else /* !YYPARSE_PARAM */
+# define YYPARSE_PARAM_ARG
+# define YYPARSE_PARAM_DECL
+#endif /* !YYPARSE_PARAM */
+
+/* Prevent warning if -Wstrict-prototypes. */
+#ifdef __GNUC__
+# ifdef YYPARSE_PARAM
+int yyparse (void *);
+# else
+int yyparse (void);
+# endif
+#endif
+
+/* YY_DECL_VARIABLES -- depending whether we use a pure parser,
+ variables are global, or local to YYPARSE. */
+
+#define YY_DECL_NON_LSP_VARIABLES \
+/* The lookahead symbol. */ \
+int yychar; \
+ \
+/* The semantic value of the lookahead symbol. */ \
+YYSTYPE yylval; \
+ \
+/* Number of parse errors so far. */ \
+int yynerrs;
+
+#if YYLSP_NEEDED
+# define YY_DECL_VARIABLES \
+YY_DECL_NON_LSP_VARIABLES \
+ \
+/* Location data for the lookahead symbol. */ \
+YYLTYPE yylloc;
+#else
+# define YY_DECL_VARIABLES \
+YY_DECL_NON_LSP_VARIABLES
+#endif
+
+
+/* If nonreentrant, generate the variables here. */
+
+#if !YYPURE
+YY_DECL_VARIABLES
+#endif /* !YYPURE */
+
+int
+yyparse (YYPARSE_PARAM_ARG)
+ YYPARSE_PARAM_DECL
+{
+ /* If reentrant, generate the variables here. */
+#if YYPURE
+ YY_DECL_VARIABLES
+#endif /* !YYPURE */
+
+ register int yystate;
+ register int yyn;
+ int yyresult;
+ /* Number of tokens to shift before error messages enabled. */
+ int yyerrstatus;
+ /* Lookahead token as an internal (translated) token number. */
+ int yychar1 = 0;
+
+ /* Three stacks and their tools:
+ `yyss': related to states,
+ `yyvs': related to semantic values,
+ `yyls': related to locations.
+
+ Refer to the stacks thru separate pointers, to allow yyoverflow
+ to reallocate them elsewhere. */
+
+ /* The state stack. */
+ short yyssa[YYINITDEPTH];
+ short *yyss = yyssa;
+ register short *yyssp;
+
+ /* The semantic value stack. */
+ YYSTYPE yyvsa[YYINITDEPTH];
+ YYSTYPE *yyvs = yyvsa;
+ register YYSTYPE *yyvsp;
+
+#if YYLSP_NEEDED
+ /* The location stack. */
+ YYLTYPE yylsa[YYINITDEPTH];
+ YYLTYPE *yyls = yylsa;
+ YYLTYPE *yylsp;
+#endif
+
+#if YYLSP_NEEDED
+# define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
+#else
+# define YYPOPSTACK (yyvsp--, yyssp--)
+#endif
+
+ YYSIZE_T yystacksize = YYINITDEPTH;
+
+
+ /* The variables used to return semantic value and location from the
+ action routines. */
+ YYSTYPE yyval;
+#if YYLSP_NEEDED
+ YYLTYPE yyloc;
+#endif
+
+ /* When reducing, the number of symbols on the RHS of the reduced
+ rule. */
+ int yylen;
+
+ YYDPRINTF ((stderr, "Starting parse\n"));
+
+ yystate = 0;
+ yyerrstatus = 0;
+ yynerrs = 0;
+ yychar = YYEMPTY; /* Cause a token to be read. */
+
+ /* Initialize stack pointers.
+ Waste one element of value and location stack
+ so that they stay on the same level as the state stack.
+ The wasted elements are never initialized. */
+
+ yyssp = yyss;
+ yyvsp = yyvs;
+#if YYLSP_NEEDED
+ yylsp = yyls;
+#endif
+ goto yysetstate;
+
+/*------------------------------------------------------------.
+| yynewstate -- Push a new state, which is found in yystate. |
+`------------------------------------------------------------*/
+ yynewstate:
+ /* In all cases, when you get here, the value and location stacks
+ have just been pushed. so pushing a state here evens the stacks.
+ */
+ yyssp++;
+
+ yysetstate:
+ *yyssp = yystate;
+
+ if (yyssp >= yyss + yystacksize - 1)
+ {
+ /* Get the current used size of the three stacks, in elements. */
+ YYSIZE_T yysize = yyssp - yyss + 1;
+
+#ifdef yyoverflow
+ {
+ /* Give user a chance to reallocate the stack. Use copies of
+ these so that the &'s don't force the real ones into
+ memory. */
+ YYSTYPE *yyvs1 = yyvs;
+ short *yyss1 = yyss;
+
+ /* Each stack pointer address is followed by the size of the
+ data in use in that stack, in bytes. */
+# if YYLSP_NEEDED
+ YYLTYPE *yyls1 = yyls;
+ /* This used to be a conditional around just the two extra args,
+ but that might be undefined if yyoverflow is a macro. */
+ yyoverflow ("parser stack overflow",
+ &yyss1, yysize * sizeof (*yyssp),
+ &yyvs1, yysize * sizeof (*yyvsp),
+ &yyls1, yysize * sizeof (*yylsp),
+ &yystacksize);
+ yyls = yyls1;
+# else
+ yyoverflow ("parser stack overflow",
+ &yyss1, yysize * sizeof (*yyssp),
+ &yyvs1, yysize * sizeof (*yyvsp),
+ &yystacksize);
+# endif
+ yyss = yyss1;
+ yyvs = yyvs1;
+ }
+#else /* no yyoverflow */
+# ifndef YYSTACK_RELOCATE
+ goto yyoverflowlab;
+# else
+ /* Extend the stack our own way. */
+ if (yystacksize >= YYMAXDEPTH)
+ goto yyoverflowlab;
+ yystacksize *= 2;
+ if (yystacksize > YYMAXDEPTH)
+ yystacksize = YYMAXDEPTH;
+
+ {
+ short *yyss1 = yyss;
+ union yyalloc *yyptr =
+ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
+ if (! yyptr)
+ goto yyoverflowlab;
+ YYSTACK_RELOCATE (yyss);
+ YYSTACK_RELOCATE (yyvs);
+# if YYLSP_NEEDED
+ YYSTACK_RELOCATE (yyls);
+# endif
+# undef YYSTACK_RELOCATE
+ if (yyss1 != yyssa)
+ YYSTACK_FREE (yyss1);
+ }
+# endif
+#endif /* no yyoverflow */
+
+ yyssp = yyss + yysize - 1;
+ yyvsp = yyvs + yysize - 1;
+#if YYLSP_NEEDED
+ yylsp = yyls + yysize - 1;
+#endif
+
+ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
+ (unsigned long int) yystacksize));
+
+ if (yyssp >= yyss + yystacksize - 1)
+ YYABORT;
+ }
+
+ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+ goto yybackup;
+
+
+/*-----------.
+| yybackup. |
+`-----------*/
+yybackup:
+
+/* Do appropriate processing given the current state. */
+/* Read a lookahead token if we need one and don't already have one. */
+/* yyresume: */
+
+ /* First try to decide what to do without reference to lookahead token. */
+
+ yyn = yypact[yystate];
+ if (yyn == YYFLAG)
+ goto yydefault;
+
+ /* Not known => get a lookahead token if don't already have one. */
+
+ /* yychar is either YYEMPTY or YYEOF
+ or a valid token in external form. */
+
+ if (yychar == YYEMPTY)
+ {
+ YYDPRINTF ((stderr, "Reading a token: "));
+ yychar = YYLEX;
+ }
+
+ /* Convert token to internal form (in yychar1) for indexing tables with */
+
+ if (yychar <= 0) /* This means end of input. */
+ {
+ yychar1 = 0;
+ yychar = YYEOF; /* Don't call YYLEX any more */
+
+ YYDPRINTF ((stderr, "Now at end of input.\n"));
+ }
+ else
+ {
+ yychar1 = YYTRANSLATE (yychar);
+
+#if YYDEBUG
+ /* We have to keep this `#if YYDEBUG', since we use variables
+ which are defined only if `YYDEBUG' is set. */
+ if (yydebug)
+ {
+ YYFPRINTF (stderr, "Next token is %d (%s",
+ yychar, yytname[yychar1]);
+ /* Give the individual parser a way to print the precise
+ meaning of a token, for further debugging info. */
+# ifdef YYPRINT
+ YYPRINT (stderr, yychar, yylval);
+# endif
+ YYFPRINTF (stderr, ")\n");
+ }
+#endif
+ }
+
+ yyn += yychar1;
+ if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
+ goto yydefault;
+
+ yyn = yytable[yyn];
+
+ /* yyn is what to do for this token type in this state.
+ Negative => reduce, -yyn is rule number.
+ Positive => shift, yyn is new state.
+ New state is final state => don't bother to shift,
+ just return success.
+ 0, or most negative number => error. */
+
+ if (yyn < 0)
+ {
+ if (yyn == YYFLAG)
+ goto yyerrlab;
+ yyn = -yyn;
+ goto yyreduce;
+ }
+ else if (yyn == 0)
+ goto yyerrlab;
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ /* Shift the lookahead token. */
+ YYDPRINTF ((stderr, "Shifting token %d (%s), ",
+ yychar, yytname[yychar1]));
+
+ /* Discard the token being shifted unless it is eof. */
+ if (yychar != YYEOF)
+ yychar = YYEMPTY;
+
+ *++yyvsp = yylval;
+#if YYLSP_NEEDED
+ *++yylsp = yylloc;
+#endif
+
+ /* Count tokens shifted since error; after three, turn off error
+ status. */
+ if (yyerrstatus)
+ yyerrstatus--;
+
+ yystate = yyn;
+ goto yynewstate;
+
+
+/*-----------------------------------------------------------.
+| yydefault -- do the default action for the current state. |
+`-----------------------------------------------------------*/
+yydefault:
+ yyn = yydefact[yystate];
+ if (yyn == 0)
+ goto yyerrlab;
+ goto yyreduce;
+
+
+/*-----------------------------.
+| yyreduce -- Do a reduction. |
+`-----------------------------*/
+yyreduce:
+ /* yyn is the number of a rule to reduce with. */
+ yylen = yyr2[yyn];
+
+ /* If YYLEN is nonzero, implement the default value of the action:
+ `$$ = $1'.
+
+ Otherwise, the following line sets YYVAL to the semantic value of
+ the lookahead token. This behavior is undocumented and Bison
+ users should not rely upon it. Assigning to YYVAL
+ unconditionally makes the parser a bit smaller, and it avoids a
+ GCC warning that YYVAL may be used uninitialized. */
+ yyval = yyvsp[1-yylen];
+
+#if YYLSP_NEEDED
+ /* Similarly for the default location. Let the user run additional
+ commands if for instance locations are ranges. */
+ yyloc = yylsp[1-yylen];
+ YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
+#endif
+
+#if YYDEBUG
+ /* We have to keep this `#if YYDEBUG', since we use variables which
+ are defined only if `YYDEBUG' is set. */
+ if (yydebug)
+ {
+ int yyi;
+
+ YYFPRINTF (stderr, "Reducing via rule %d (line %d), ",
+ yyn, yyrline[yyn]);
+
+ /* Print the symbols being reduced, and their result. */
+ for (yyi = yyprhs[yyn]; yyrhs[yyi] > 0; yyi++)
+ YYFPRINTF (stderr, "%s ", yytname[yyrhs[yyi]]);
+ YYFPRINTF (stderr, " -> %s\n", yytname[yyr1[yyn]]);
+ }
+#endif
+
+ switch (yyn) {
+
+case 1:
+#line 175 "plural.y"
+{
+ if (yyvsp[0].exp == NULL)
+ YYABORT;
+ ((struct parse_args *) arg)->res = yyvsp[0].exp;
+ }
+ break;
+case 2:
+#line 183 "plural.y"
+{
+ yyval.exp = new_exp_3 (qmop, yyvsp[-4].exp, yyvsp[-2].exp, yyvsp[0].exp);
+ }
+ break;
+case 3:
+#line 187 "plural.y"
+{
+ yyval.exp = new_exp_2 (lor, yyvsp[-2].exp, yyvsp[0].exp);
+ }
+ break;
+case 4:
+#line 191 "plural.y"
+{
+ yyval.exp = new_exp_2 (land, yyvsp[-2].exp, yyvsp[0].exp);
+ }
+ break;
+case 5:
+#line 195 "plural.y"
+{
+ yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
+ }
+ break;
+case 6:
+#line 199 "plural.y"
+{
+ yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
+ }
+ break;
+case 7:
+#line 203 "plural.y"
+{
+ yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
+ }
+ break;
+case 8:
+#line 207 "plural.y"
+{
+ yyval.exp = new_exp_2 (yyvsp[-1].op, yyvsp[-2].exp, yyvsp[0].exp);
+ }
+ break;
+case 9:
+#line 211 "plural.y"
+{
+ yyval.exp = new_exp_1 (lnot, yyvsp[0].exp);
+ }
+ break;
+case 10:
+#line 215 "plural.y"
+{
+ yyval.exp = new_exp_0 (var);
+ }
+ break;
+case 11:
+#line 219 "plural.y"
+{
+ if ((yyval.exp = new_exp_0 (num)) != NULL)
+ yyval.exp->val.num = yyvsp[0].num;
+ }
+ break;
+case 12:
+#line 224 "plural.y"
+{
+ yyval.exp = yyvsp[-1].exp;
+ }
+ break;
+}
+
+#line 705 "/usr/local/share/bison/bison.simple"
+
+\f
+ yyvsp -= yylen;
+ yyssp -= yylen;
+#if YYLSP_NEEDED
+ yylsp -= yylen;
+#endif
+
+#if YYDEBUG
+ if (yydebug)
+ {
+ short *yyssp1 = yyss - 1;
+ YYFPRINTF (stderr, "state stack now");
+ while (yyssp1 != yyssp)
+ YYFPRINTF (stderr, " %d", *++yyssp1);
+ YYFPRINTF (stderr, "\n");
+ }
+#endif
+
+ *++yyvsp = yyval;
+#if YYLSP_NEEDED
+ *++yylsp = yyloc;
+#endif
+
+ /* Now `shift' the result of the reduction. Determine what state
+ that goes to, based on the state we popped back to and the rule
+ number reduced by. */
+
+ yyn = yyr1[yyn];
+
+ yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
+ if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+ yystate = yytable[yystate];
+ else
+ yystate = yydefgoto[yyn - YYNTBASE];
+
+ goto yynewstate;
+
+
+/*------------------------------------.
+| yyerrlab -- here on detecting error |
+`------------------------------------*/
+yyerrlab:
+ /* If not already recovering from an error, report this error. */
+ if (!yyerrstatus)
+ {
+ ++yynerrs;
+
+#ifdef YYERROR_VERBOSE
+ yyn = yypact[yystate];
+
+ if (yyn > YYFLAG && yyn < YYLAST)
+ {
+ YYSIZE_T yysize = 0;
+ char *yymsg;
+ int yyx, yycount;
+
+ yycount = 0;
+ /* Start YYX at -YYN if negative to avoid negative indexes in
+ YYCHECK. */
+ for (yyx = yyn < 0 ? -yyn : 0;
+ yyx < (int) (sizeof (yytname) / sizeof (char *)); yyx++)
+ if (yycheck[yyx + yyn] == yyx)
+ yysize += yystrlen (yytname[yyx]) + 15, yycount++;
+ yysize += yystrlen ("parse error, unexpected ") + 1;
+ yysize += yystrlen (yytname[YYTRANSLATE (yychar)]);
+ yymsg = (char *) YYSTACK_ALLOC (yysize);
+ if (yymsg != 0)
+ {
+ char *yyp = yystpcpy (yymsg, "parse error, unexpected ");
+ yyp = yystpcpy (yyp, yytname[YYTRANSLATE (yychar)]);
+
+ if (yycount < 5)
+ {
+ yycount = 0;
+ for (yyx = yyn < 0 ? -yyn : 0;
+ yyx < (int) (sizeof (yytname) / sizeof (char *));
+ yyx++)
+ if (yycheck[yyx + yyn] == yyx)
+ {
+ const char *yyq = ! yycount ? ", expecting " : " or ";
+ yyp = yystpcpy (yyp, yyq);
+ yyp = yystpcpy (yyp, yytname[yyx]);
+ yycount++;
+ }
+ }
+ yyerror (yymsg);
+ YYSTACK_FREE (yymsg);
+ }
+ else
+ yyerror ("parse error; also virtual memory exhausted");
+ }
+ else
+#endif /* defined (YYERROR_VERBOSE) */
+ yyerror ("parse error");
+ }
+ goto yyerrlab1;
+
+
+/*--------------------------------------------------.
+| yyerrlab1 -- error raised explicitly by an action |
+`--------------------------------------------------*/
+yyerrlab1:
+ if (yyerrstatus == 3)
+ {
+ /* If just tried and failed to reuse lookahead token after an
+ error, discard it. */
+
+ /* return failure if at end of input */
+ if (yychar == YYEOF)
+ YYABORT;
+ YYDPRINTF ((stderr, "Discarding token %d (%s).\n",
+ yychar, yytname[yychar1]));
+ yychar = YYEMPTY;
+ }
+
+ /* Else will try to reuse lookahead token after shifting the error
+ token. */
+
+ yyerrstatus = 3; /* Each real token shifted decrements this */
+
+ goto yyerrhandle;
+
+
+/*-------------------------------------------------------------------.
+| yyerrdefault -- current state does not do anything special for the |
+| error token. |
+`-------------------------------------------------------------------*/
+yyerrdefault:
+#if 0
+ /* This is wrong; only states that explicitly want error tokens
+ should shift them. */
+
+ /* If its default is to accept any token, ok. Otherwise pop it. */
+ yyn = yydefact[yystate];
+ if (yyn)
+ goto yydefault;
+#endif
+
+
+/*---------------------------------------------------------------.
+| yyerrpop -- pop the current state because it cannot handle the |
+| error token |
+`---------------------------------------------------------------*/
+yyerrpop:
+ if (yyssp == yyss)
+ YYABORT;
+ yyvsp--;
+ yystate = *--yyssp;
+#if YYLSP_NEEDED
+ yylsp--;
+#endif
+
+#if YYDEBUG
+ if (yydebug)
+ {
+ short *yyssp1 = yyss - 1;
+ YYFPRINTF (stderr, "Error: state stack now");
+ while (yyssp1 != yyssp)
+ YYFPRINTF (stderr, " %d", *++yyssp1);
+ YYFPRINTF (stderr, "\n");
+ }
+#endif
+
+/*--------------.
+| yyerrhandle. |
+`--------------*/
+yyerrhandle:
+ yyn = yypact[yystate];
+ if (yyn == YYFLAG)
+ goto yyerrdefault;
+
+ yyn += YYTERROR;
+ if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
+ goto yyerrdefault;
+
+ yyn = yytable[yyn];
+ if (yyn < 0)
+ {
+ if (yyn == YYFLAG)
+ goto yyerrpop;
+ yyn = -yyn;
+ goto yyreduce;
+ }
+ else if (yyn == 0)
+ goto yyerrpop;
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ YYDPRINTF ((stderr, "Shifting error token, "));
+
+ *++yyvsp = yylval;
+#if YYLSP_NEEDED
+ *++yylsp = yylloc;
+#endif
+
+ yystate = yyn;
+ goto yynewstate;
+
+
+/*-------------------------------------.
+| yyacceptlab -- YYACCEPT comes here. |
+`-------------------------------------*/
+yyacceptlab:
+ yyresult = 0;
+ goto yyreturn;
+
+/*-----------------------------------.
+| yyabortlab -- YYABORT comes here. |
+`-----------------------------------*/
+yyabortlab:
+ yyresult = 1;
+ goto yyreturn;
+
+/*---------------------------------------------.
+| yyoverflowab -- parser overflow comes here. |
+`---------------------------------------------*/
+yyoverflowlab:
+ yyerror ("parser stack overflow");
+ yyresult = 2;
+ /* Fall through. */
+
+yyreturn:
+#ifndef yyoverflow
+ if (yyss != yyssa)
+ YYSTACK_FREE (yyss);
+#endif
+ return yyresult;
+}
+#line 229 "plural.y"
+
+
+void
+internal_function
+FREE_EXPRESSION (exp)
+ struct expression *exp;
+{
+ if (exp == NULL)
+ return;
+
+ /* Handle the recursive case. */
+ switch (exp->nargs)
+ {
+ case 3:
+ FREE_EXPRESSION (exp->val.args[2]);
+ /* FALLTHROUGH */
+ case 2:
+ FREE_EXPRESSION (exp->val.args[1]);
+ /* FALLTHROUGH */
+ case 1:
+ FREE_EXPRESSION (exp->val.args[0]);
+ /* FALLTHROUGH */
+ default:
+ break;
+ }
+
+ free (exp);
+}
+
+
+static int
+yylex (lval, pexp)
+ YYSTYPE *lval;
+ const char **pexp;
+{
+ const char *exp = *pexp;
+ int result;
+
+ while (1)
+ {
+ if (exp[0] == '\0')
+ {
+ *pexp = exp;
+ return YYEOF;
+ }
+
+ if (exp[0] != ' ' && exp[0] != '\t')
+ break;
+
+ ++exp;
+ }
+
+ result = *exp++;
+ switch (result)
+ {
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ {
+ unsigned long int n = result - '0';
+ while (exp[0] >= '0' && exp[0] <= '9')
+ {
+ n *= 10;
+ n += exp[0] - '0';
+ ++exp;
+ }
+ lval->num = n;
+ result = NUMBER;
+ }
+ break;
+
+ case '=':
+ if (exp[0] == '=')
+ {
+ ++exp;
+ lval->op = equal;
+ result = EQUOP2;
+ }
+ else
+ result = YYERRCODE;
+ break;
+
+ case '!':
+ if (exp[0] == '=')
+ {
+ ++exp;
+ lval->op = not_equal;
+ result = EQUOP2;
+ }
+ break;
+
+ case '&':
+ case '|':
+ if (exp[0] == result)
+ ++exp;
+ else
+ result = YYERRCODE;
+ break;
+
+ case '<':
+ if (exp[0] == '=')
+ {
+ ++exp;
+ lval->op = less_or_equal;
+ }
+ else
+ lval->op = less_than;
+ result = CMPOP2;
+ break;
+
+ case '>':
+ if (exp[0] == '=')
+ {
+ ++exp;
+ lval->op = greater_or_equal;
+ }
+ else
+ lval->op = greater_than;
+ result = CMPOP2;
+ break;
+
+ case '*':
+ lval->op = mult;
+ result = MULOP2;
+ break;
+
+ case '/':
+ lval->op = divide;
+ result = MULOP2;
+ break;
+
+ case '%':
+ lval->op = module;
+ result = MULOP2;
+ break;
+
+ case '+':
+ lval->op = plus;
+ result = ADDOP2;
+ break;
+
+ case '-':
+ lval->op = minus;
+ result = ADDOP2;
+ break;
+
+ case 'n':
+ case '?':
+ case ':':
+ case '(':
+ case ')':
+ /* Nothing, just return the character. */
+ break;
+
+ case ';':
+ case '\n':
+ case '\0':
+ /* Be safe and let the user call this function again. */
+ --exp;
+ result = YYEOF;
+ break;
+
+ default:
+ result = YYERRCODE;
+#if YYDEBUG != 0
+ --exp;
+#endif
+ break;
+ }
+
+ *pexp = exp;
+
+ return result;
+}
+
+
+static void
+yyerror (str)
+ const char *str;
+{
+ /* Do nothing. We don't print error messages here. */
+}
--- /dev/null
+%{
+/* Expression parsing for plural form selection.
+ Copyright (C) 2000, 2001 Free Software Foundation, Inc.
+ Written by Ulrich Drepper <drepper@cygnus.com>, 2000.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* The bison generated parser uses alloca. AIX 3 forces us to put this
+ declaration at the beginning of the file. The declaration in bison's
+ skeleton file comes too late. This must come before <config.h>
+ because <config.h> may include arbitrary system headers. */
+#if defined _AIX && !defined __GNUC__
+ #pragma alloca
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include <config.h>
+#endif
+
+#include <stddef.h>
+#include <stdlib.h>
+#include "plural-exp.h"
+
+/* The main function generated by the parser is called __gettextparse,
+ but we want it to be called PLURAL_PARSE. */
+#ifndef _LIBC
+# define __gettextparse PLURAL_PARSE
+#endif
+
+#define YYLEX_PARAM &((struct parse_args *) arg)->cp
+#define YYPARSE_PARAM arg
+%}
+%pure_parser
+%expect 7
+
+%union {
+ unsigned long int num;
+ enum operator op;
+ struct expression *exp;
+}
+
+%{
+/* Prototypes for local functions. */
+static struct expression *new_exp PARAMS ((int nargs, enum operator op,
+ struct expression * const *args));
+static inline struct expression *new_exp_0 PARAMS ((enum operator op));
+static inline struct expression *new_exp_1 PARAMS ((enum operator op,
+ struct expression *right));
+static struct expression *new_exp_2 PARAMS ((enum operator op,
+ struct expression *left,
+ struct expression *right));
+static inline struct expression *new_exp_3 PARAMS ((enum operator op,
+ struct expression *bexp,
+ struct expression *tbranch,
+ struct expression *fbranch));
+static int yylex PARAMS ((YYSTYPE *lval, const char **pexp));
+static void yyerror PARAMS ((const char *str));
+
+/* Allocation of expressions. */
+
+static struct expression *
+new_exp (nargs, op, args)
+ int nargs;
+ enum operator op;
+ struct expression * const *args;
+{
+ int i;
+ struct expression *newp;
+
+ /* If any of the argument could not be malloc'ed, just return NULL. */
+ for (i = nargs - 1; i >= 0; i--)
+ if (args[i] == NULL)
+ goto fail;
+
+ /* Allocate a new expression. */
+ newp = (struct expression *) malloc (sizeof (*newp));
+ if (newp != NULL)
+ {
+ newp->nargs = nargs;
+ newp->operation = op;
+ for (i = nargs - 1; i >= 0; i--)
+ newp->val.args[i] = args[i];
+ return newp;
+ }
+
+ fail:
+ for (i = nargs - 1; i >= 0; i--)
+ FREE_EXPRESSION (args[i]);
+
+ return NULL;
+}
+
+static inline struct expression *
+new_exp_0 (op)
+ enum operator op;
+{
+ return new_exp (0, op, NULL);
+}
+
+static inline struct expression *
+new_exp_1 (op, right)
+ enum operator op;
+ struct expression *right;
+{
+ struct expression *args[1];
+
+ args[0] = right;
+ return new_exp (1, op, args);
+}
+
+static struct expression *
+new_exp_2 (op, left, right)
+ enum operator op;
+ struct expression *left;
+ struct expression *right;
+{
+ struct expression *args[2];
+
+ args[0] = left;
+ args[1] = right;
+ return new_exp (2, op, args);
+}
+
+static inline struct expression *
+new_exp_3 (op, bexp, tbranch, fbranch)
+ enum operator op;
+ struct expression *bexp;
+ struct expression *tbranch;
+ struct expression *fbranch;
+{
+ struct expression *args[3];
+
+ args[0] = bexp;
+ args[1] = tbranch;
+ args[2] = fbranch;
+ return new_exp (3, op, args);
+}
+
+%}
+
+/* This declares that all operators have the same associativity and the
+ precedence order as in C. See [Harbison, Steele: C, A Reference Manual].
+ There is no unary minus and no bitwise operators.
+ Operators with the same syntactic behaviour have been merged into a single
+ token, to save space in the array generated by bison. */
+%right '?' /* ? */
+%left '|' /* || */
+%left '&' /* && */
+%left EQUOP2 /* == != */
+%left CMPOP2 /* < > <= >= */
+%left ADDOP2 /* + - */
+%left MULOP2 /* * / % */
+%right '!' /* ! */
+
+%token <op> EQUOP2 CMPOP2 ADDOP2 MULOP2
+%token <num> NUMBER
+%type <exp> exp
+
+%%
+
+start: exp
+ {
+ if ($1 == NULL)
+ YYABORT;
+ ((struct parse_args *) arg)->res = $1;
+ }
+ ;
+
+exp: exp '?' exp ':' exp
+ {
+ $$ = new_exp_3 (qmop, $1, $3, $5);
+ }
+ | exp '|' exp
+ {
+ $$ = new_exp_2 (lor, $1, $3);
+ }
+ | exp '&' exp
+ {
+ $$ = new_exp_2 (land, $1, $3);
+ }
+ | exp EQUOP2 exp
+ {
+ $$ = new_exp_2 ($2, $1, $3);
+ }
+ | exp CMPOP2 exp
+ {
+ $$ = new_exp_2 ($2, $1, $3);
+ }
+ | exp ADDOP2 exp
+ {
+ $$ = new_exp_2 ($2, $1, $3);
+ }
+ | exp MULOP2 exp
+ {
+ $$ = new_exp_2 ($2, $1, $3);
+ }
+ | '!' exp
+ {
+ $$ = new_exp_1 (lnot, $2);
+ }
+ | 'n'
+ {
+ $$ = new_exp_0 (var);
+ }
+ | NUMBER
+ {
+ if (($$ = new_exp_0 (num)) != NULL)
+ $$->val.num = $1;
+ }
+ | '(' exp ')'
+ {
+ $$ = $2;
+ }
+ ;
+
+%%
+
+void
+internal_function
+FREE_EXPRESSION (exp)
+ struct expression *exp;
+{
+ if (exp == NULL)
+ return;
+
+ /* Handle the recursive case. */
+ switch (exp->nargs)
+ {
+ case 3:
+ FREE_EXPRESSION (exp->val.args[2]);
+ /* FALLTHROUGH */
+ case 2:
+ FREE_EXPRESSION (exp->val.args[1]);
+ /* FALLTHROUGH */
+ case 1:
+ FREE_EXPRESSION (exp->val.args[0]);
+ /* FALLTHROUGH */
+ default:
+ break;
+ }
+
+ free (exp);
+}
+
+
+static int
+yylex (lval, pexp)
+ YYSTYPE *lval;
+ const char **pexp;
+{
+ const char *exp = *pexp;
+ int result;
+
+ while (1)
+ {
+ if (exp[0] == '\0')
+ {
+ *pexp = exp;
+ return YYEOF;
+ }
+
+ if (exp[0] != ' ' && exp[0] != '\t')
+ break;
+
+ ++exp;
+ }
+
+ result = *exp++;
+ switch (result)
+ {
+ case '0': case '1': case '2': case '3': case '4':
+ case '5': case '6': case '7': case '8': case '9':
+ {
+ unsigned long int n = result - '0';
+ while (exp[0] >= '0' && exp[0] <= '9')
+ {
+ n *= 10;
+ n += exp[0] - '0';
+ ++exp;
+ }
+ lval->num = n;
+ result = NUMBER;
+ }
+ break;
+
+ case '=':
+ if (exp[0] == '=')
+ {
+ ++exp;
+ lval->op = equal;
+ result = EQUOP2;
+ }
+ else
+ result = YYERRCODE;
+ break;
+
+ case '!':
+ if (exp[0] == '=')
+ {
+ ++exp;
+ lval->op = not_equal;
+ result = EQUOP2;
+ }
+ break;
+
+ case '&':
+ case '|':
+ if (exp[0] == result)
+ ++exp;
+ else
+ result = YYERRCODE;
+ break;
+
+ case '<':
+ if (exp[0] == '=')
+ {
+ ++exp;
+ lval->op = less_or_equal;
+ }
+ else
+ lval->op = less_than;
+ result = CMPOP2;
+ break;
+
+ case '>':
+ if (exp[0] == '=')
+ {
+ ++exp;
+ lval->op = greater_or_equal;
+ }
+ else
+ lval->op = greater_than;
+ result = CMPOP2;
+ break;
+
+ case '*':
+ lval->op = mult;
+ result = MULOP2;
+ break;
+
+ case '/':
+ lval->op = divide;
+ result = MULOP2;
+ break;
+
+ case '%':
+ lval->op = module;
+ result = MULOP2;
+ break;
+
+ case '+':
+ lval->op = plus;
+ result = ADDOP2;
+ break;
+
+ case '-':
+ lval->op = minus;
+ result = ADDOP2;
+ break;
+
+ case 'n':
+ case '?':
+ case ':':
+ case '(':
+ case ')':
+ /* Nothing, just return the character. */
+ break;
+
+ case ';':
+ case '\n':
+ case '\0':
+ /* Be safe and let the user call this function again. */
+ --exp;
+ result = YYEOF;
+ break;
+
+ default:
+ result = YYERRCODE;
+#if YYDEBUG != 0
+ --exp;
+#endif
+ break;
+ }
+
+ *pexp = exp;
+
+ return result;
+}
+
+
+static void
+yyerror (str)
+ const char *str;
+{
+ /* Do nothing. We don't print error messages here. */
+}
+++ /dev/null
-# po2tbl.sed - Convert Uniforum style .po file to lookup table for catgets
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.org>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-1 {
- i\
-/* Automatically generated by po2tbl.sed from @PACKAGE NAME@.pot. */\
-\
-#if HAVE_CONFIG_H\
-# include <config.h>\
-#endif\
-\
-#include "libgettext.h"\
-\
-const struct _msg_ent _msg_tbl[] = {
- h
- s/.*/0/
- x
-}
-#
-# Write msgid entries in C array form.
-#
-/^msgid/ {
- s/msgid[ ]*\(".*"\)/ {\1/
- tb
-# Append the next line
- :b
- N
-# Look whether second part is continuation line.
- s/\(.*\)"\(\n\)"\(.*"\)/\1\2\3/
-# Yes, then branch.
- ta
-# Because we assume that the input file correctly formed the line
-# just read cannot be again be a msgid line. So it's safe to ignore
-# it.
- s/\(.*\)\n.*/\1/
- bc
-# We found a continuation line. But before printing insert '\'.
- :a
- s/\(.*\)\(\n.*\)/\1\\\2/
- P
-# We cannot use D here.
- s/.*\n\(.*\)/\1/
-# Some buggy seds do not clear the `successful substitution since last ``t'''
-# flag on `N', so we do a `t' here to clear it.
- tb
-# Not reached
- :c
- x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
- td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
- :d
- s/9\(_*\)$/_\1/
- td
-# Assure at least one digit is available.
- s/^\(_*\)$/0\1/
-# Increment the last digit.
- s/8\(_*\)$/9\1/
- s/7\(_*\)$/8\1/
- s/6\(_*\)$/7\1/
- s/5\(_*\)$/6\1/
- s/4\(_*\)$/5\1/
- s/3\(_*\)$/4\1/
- s/2\(_*\)$/3\1/
- s/1\(_*\)$/2\1/
- s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
- s/_/0/g
- x
- G
- s/\(.*\)\n\([0-9]*\)/\1, \2},/
- s/\(.*\)"$/\1/
- p
-}
-#
-# Last line.
-#
-$ {
- i\
-};\
-
- g
- s/0*\(.*\)/int _msg_tbl_length = \1;/p
-}
-d
--- /dev/null
+# Add this package to a list of references stored in a text file.
+#
+# Copyright (C) 2000 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Library General Public License for more details.
+#
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+# USA.
+#
+# Written by Bruno Haible <haible@clisp.cons.org>.
+#
+/^# Packages using this file: / {
+ s/# Packages using this file://
+ ta
+ :a
+ s/ @PACKAGE@ / @PACKAGE@ /
+ tb
+ s/ $/ @PACKAGE@ /
+ :b
+ s/^/# Packages using this file:/
+}
--- /dev/null
+# Remove this package from a list of references stored in a text file.
+#
+# Copyright (C) 2000 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Library General Public License for more details.
+#
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+# USA.
+#
+# Written by Bruno Haible <haible@clisp.cons.org>.
+#
+/^# Packages using this file: / {
+ s/# Packages using this file://
+ s/ @PACKAGE@ / /
+ s/^/# Packages using this file:/
+}
--- /dev/null
+/* Provide relocatable packages.
+ Copyright (C) 2003 Free Software Foundation, Inc.
+ Written by Bruno Haible <bruno@clisp.org>, 2003.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+
+/* Tell glibc's <stdio.h> to provide a prototype for getline().
+ This must come before <config.h> because <config.h> may include
+ <features.h>, and once <features.h> has been included, it's too late. */
+#ifndef _GNU_SOURCE
+# define _GNU_SOURCE 1
+#endif
+
+#ifdef HAVE_CONFIG_H
+# include "config.h"
+#endif
+
+/* Specification. */
+#include "relocatable.h"
+
+#if ENABLE_RELOCATABLE
+
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#ifdef NO_XMALLOC
+# define xmalloc malloc
+#else
+# include "xmalloc.h"
+#endif
+
+#if DEPENDS_ON_LIBCHARSET
+# include <libcharset.h>
+#endif
+#if DEPENDS_ON_LIBICONV && HAVE_ICONV
+# include <iconv.h>
+#endif
+#if DEPENDS_ON_LIBINTL && ENABLE_NLS
+# include <libintl.h>
+#endif
+
+/* Faked cheap 'bool'. */
+#undef bool
+#undef false
+#undef true
+#define bool int
+#define false 0
+#define true 1
+
+/* Pathname support.
+ ISSLASH(C) tests whether C is a directory separator character.
+ IS_PATH_WITH_DIR(P) tests whether P contains a directory specification.
+ */
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+ /* Win32, OS/2, DOS */
+# define ISSLASH(C) ((C) == '/' || (C) == '\\')
+# define HAS_DEVICE(P) \
+ ((((P)[0] >= 'A' && (P)[0] <= 'Z') || ((P)[0] >= 'a' && (P)[0] <= 'z')) \
+ && (P)[1] == ':')
+# define IS_PATH_WITH_DIR(P) \
+ (strchr (P, '/') != NULL || strchr (P, '\\') != NULL || HAS_DEVICE (P))
+# define FILESYSTEM_PREFIX_LEN(P) (HAS_DEVICE (P) ? 2 : 0)
+#else
+ /* Unix */
+# define ISSLASH(C) ((C) == '/')
+# define IS_PATH_WITH_DIR(P) (strchr (P, '/') != NULL)
+# define FILESYSTEM_PREFIX_LEN(P) 0
+#endif
+
+/* Original installation prefix. */
+static char *orig_prefix;
+static size_t orig_prefix_len;
+/* Current installation prefix. */
+static char *curr_prefix;
+static size_t curr_prefix_len;
+/* These prefixes do not end in a slash. Anything that will be concatenated
+ to them must start with a slash. */
+
+/* Sets the original and the current installation prefix of this module.
+ Relocation simply replaces a pathname starting with the original prefix
+ by the corresponding pathname with the current prefix instead. Both
+ prefixes should be directory names without trailing slash (i.e. use ""
+ instead of "/"). */
+static void
+set_this_relocation_prefix (const char *orig_prefix_arg,
+ const char *curr_prefix_arg)
+{
+ if (orig_prefix_arg != NULL && curr_prefix_arg != NULL
+ /* Optimization: if orig_prefix and curr_prefix are equal, the
+ relocation is a nop. */
+ && strcmp (orig_prefix_arg, curr_prefix_arg) != 0)
+ {
+ /* Duplicate the argument strings. */
+ char *memory;
+
+ orig_prefix_len = strlen (orig_prefix_arg);
+ curr_prefix_len = strlen (curr_prefix_arg);
+ memory = (char *) xmalloc (orig_prefix_len + 1 + curr_prefix_len + 1);
+#ifdef NO_XMALLOC
+ if (memory != NULL)
+#endif
+ {
+ memcpy (memory, orig_prefix_arg, orig_prefix_len + 1);
+ orig_prefix = memory;
+ memory += orig_prefix_len + 1;
+ memcpy (memory, curr_prefix_arg, curr_prefix_len + 1);
+ curr_prefix = memory;
+ return;
+ }
+ }
+ orig_prefix = NULL;
+ curr_prefix = NULL;
+ /* Don't worry about wasted memory here - this function is usually only
+ called once. */
+}
+
+/* Sets the original and the current installation prefix of the package.
+ Relocation simply replaces a pathname starting with the original prefix
+ by the corresponding pathname with the current prefix instead. Both
+ prefixes should be directory names without trailing slash (i.e. use ""
+ instead of "/"). */
+void
+set_relocation_prefix (const char *orig_prefix_arg, const char *curr_prefix_arg)
+{
+ set_this_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+
+ /* Now notify all dependent libraries. */
+#if DEPENDS_ON_LIBCHARSET
+ libcharset_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+#endif
+#if DEPENDS_ON_LIBICONV && HAVE_ICONV && _LIBICONV_VERSION >= 0x0109
+ libiconv_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+#endif
+#if DEPENDS_ON_LIBINTL && ENABLE_NLS && defined libintl_set_relocation_prefix
+ libintl_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
+#endif
+}
+
+/* Convenience function:
+ Computes the current installation prefix, based on the original
+ installation prefix, the original installation directory of a particular
+ file, and the current pathname of this file. Returns NULL upon failure. */
+#ifdef IN_LIBRARY
+#define compute_curr_prefix local_compute_curr_prefix
+static
+#endif
+const char *
+compute_curr_prefix (const char *orig_installprefix,
+ const char *orig_installdir,
+ const char *curr_pathname)
+{
+ const char *curr_installdir;
+ const char *rel_installdir;
+
+ if (curr_pathname == NULL)
+ return NULL;
+
+ /* Determine the relative installation directory, relative to the prefix.
+ This is simply the difference between orig_installprefix and
+ orig_installdir. */
+ if (strncmp (orig_installprefix, orig_installdir, strlen (orig_installprefix))
+ != 0)
+ /* Shouldn't happen - nothing should be installed outside $(prefix). */
+ return NULL;
+ rel_installdir = orig_installdir + strlen (orig_installprefix);
+
+ /* Determine the current installation directory. */
+ {
+ const char *p_base = curr_pathname + FILESYSTEM_PREFIX_LEN (curr_pathname);
+ const char *p = curr_pathname + strlen (curr_pathname);
+ char *q;
+
+ while (p > p_base)
+ {
+ p--;
+ if (ISSLASH (*p))
+ break;
+ }
+
+ q = (char *) xmalloc (p - curr_pathname + 1);
+#ifdef NO_XMALLOC
+ if (q == NULL)
+ return NULL;
+#endif
+ memcpy (q, curr_pathname, p - curr_pathname);
+ q[p - curr_pathname] = '\0';
+ curr_installdir = q;
+ }
+
+ /* Compute the current installation prefix by removing the trailing
+ rel_installdir from it. */
+ {
+ const char *rp = rel_installdir + strlen (rel_installdir);
+ const char *cp = curr_installdir + strlen (curr_installdir);
+ const char *cp_base =
+ curr_installdir + FILESYSTEM_PREFIX_LEN (curr_installdir);
+
+ while (rp > rel_installdir && cp > cp_base)
+ {
+ bool same = false;
+ const char *rpi = rp;
+ const char *cpi = cp;
+
+ while (rpi > rel_installdir && cpi > cp_base)
+ {
+ rpi--;
+ cpi--;
+ if (ISSLASH (*rpi) || ISSLASH (*cpi))
+ {
+ if (ISSLASH (*rpi) && ISSLASH (*cpi))
+ same = true;
+ break;
+ }
+#if defined _WIN32 || defined __WIN32__ || defined __EMX__ || defined __DJGPP__
+ /* Win32, OS/2, DOS - case insignificant filesystem */
+ if ((*rpi >= 'a' && *rpi <= 'z' ? *rpi - 'a' + 'A' : *rpi)
+ != (*cpi >= 'a' && *cpi <= 'z' ? *cpi - 'a' + 'A' : *cpi))
+ break;
+#else
+ if (*rpi != *cpi)
+ break;
+#endif
+ }
+ if (!same)
+ break;
+ /* The last pathname component was the same. opi and cpi now point
+ to the slash before it. */
+ rp = rpi;
+ cp = cpi;
+ }
+
+ if (rp > rel_installdir)
+ /* Unexpected: The curr_installdir does not end with rel_installdir. */
+ return NULL;
+
+ {
+ size_t curr_prefix_len = cp - curr_installdir;
+ char *curr_prefix;
+
+ curr_prefix = (char *) xmalloc (curr_prefix_len + 1);
+#ifdef NO_XMALLOC
+ if (curr_prefix == NULL)
+ return NULL;
+#endif
+ memcpy (curr_prefix, curr_installdir, curr_prefix_len);
+ curr_prefix[curr_prefix_len] = '\0';
+
+ return curr_prefix;
+ }
+ }
+}
+
+#if defined PIC && defined INSTALLDIR
+
+/* Full pathname of shared library, or NULL. */
+static char *shared_library_fullname;
+
+#if defined _WIN32 || defined __WIN32__
+
+/* Determine the full pathname of the shared library when it is loaded. */
+
+BOOL WINAPI
+DllMain (HINSTANCE module_handle, DWORD event, LPVOID reserved)
+{
+ (void) reserved;
+
+ if (event == DLL_PROCESS_ATTACH)
+ {
+ /* The DLL is being loaded into an application's address range. */
+ static char location[MAX_PATH];
+
+ if (!GetModuleFileName (module_handle, location, sizeof (location)))
+ /* Shouldn't happen. */
+ return FALSE;
+
+ if (!IS_PATH_WITH_DIR (location))
+ /* Shouldn't happen. */
+ return FALSE;
+
+ shared_library_fullname = strdup (location);
+ }
+
+ return TRUE;
+}
+
+#else /* Unix */
+
+static void
+find_shared_library_fullname ()
+{
+#ifdef __linux__
+ FILE *fp;
+
+ /* Open the current process' maps file. It describes one VMA per line. */
+ fp = fopen ("/proc/self/maps", "r");
+ if (fp)
+ {
+ unsigned long address = (unsigned long) &find_shared_library_fullname;
+ for (;;)
+ {
+ unsigned long start, end;
+ int c;
+
+ if (fscanf (fp, "%lx-%lx", &start, &end) != 2)
+ break;
+ if (address >= start && address <= end - 1)
+ {
+ /* Found it. Now see if this line contains a filename. */
+ while (c = getc (fp), c != EOF && c != '\n' && c != '/')
+ continue;
+ if (c == '/')
+ {
+ size_t size;
+ int len;
+
+ ungetc (c, fp);
+ shared_library_fullname = NULL; size = 0;
+ len = getline (&shared_library_fullname, &size, fp);
+ if (len >= 0)
+ {
+ /* Success: filled shared_library_fullname. */
+ if (len > 0 && shared_library_fullname[len - 1] == '\n')
+ shared_library_fullname[len - 1] = '\0';
+ }
+ }
+ break;
+ }
+ while (c = getc (fp), c != EOF && c != '\n')
+ continue;
+ }
+ fclose (fp);
+ }
+#endif
+}
+
+#endif /* WIN32 / Unix */
+
+/* Return the full pathname of the current shared library.
+ Return NULL if unknown.
+ Guaranteed to work only on Linux and Woe32. */
+static char *
+get_shared_library_fullname ()
+{
+#if !(defined _WIN32 || defined __WIN32__)
+ static bool tried_find_shared_library_fullname;
+ if (!tried_find_shared_library_fullname)
+ {
+ find_shared_library_fullname ();
+ tried_find_shared_library_fullname = true;
+ }
+#endif
+ return shared_library_fullname;
+}
+
+#endif /* PIC */
+
+/* Returns the pathname, relocated according to the current installation
+ directory. */
+const char *
+relocate (const char *pathname)
+{
+#if defined PIC && defined INSTALLDIR
+ static int initialized;
+
+ /* Initialization code for a shared library. */
+ if (!initialized)
+ {
+ /* At this point, orig_prefix and curr_prefix likely have already been
+ set through the main program's set_program_name_and_installdir
+ function. This is sufficient in the case that the library has
+ initially been installed in the same orig_prefix. But we can do
+ better, to also cover the cases that 1. it has been installed
+ in a different prefix before being moved to orig_prefix and (later)
+ to curr_prefix, 2. unlike the program, it has not moved away from
+ orig_prefix. */
+ const char *orig_installprefix = INSTALLPREFIX;
+ const char *orig_installdir = INSTALLDIR;
+ const char *curr_prefix_better;
+
+ curr_prefix_better =
+ compute_curr_prefix (orig_installprefix, orig_installdir,
+ get_shared_library_fullname ());
+ if (curr_prefix_better == NULL)
+ curr_prefix_better = curr_prefix;
+
+ set_relocation_prefix (orig_installprefix, curr_prefix_better);
+
+ initialized = 1;
+ }
+#endif
+
+ /* Note: It is not necessary to perform case insensitive comparison here,
+ even for DOS-like filesystems, because the pathname argument was
+ typically created from the same Makefile variable as orig_prefix came
+ from. */
+ if (orig_prefix != NULL && curr_prefix != NULL
+ && strncmp (pathname, orig_prefix, orig_prefix_len) == 0)
+ {
+ if (pathname[orig_prefix_len] == '\0')
+ /* pathname equals orig_prefix. */
+ return curr_prefix;
+ if (ISSLASH (pathname[orig_prefix_len]))
+ {
+ /* pathname starts with orig_prefix. */
+ const char *pathname_tail = &pathname[orig_prefix_len];
+ char *result =
+ (char *) xmalloc (curr_prefix_len + strlen (pathname_tail) + 1);
+
+#ifdef NO_XMALLOC
+ if (result != NULL)
+#endif
+ {
+ memcpy (result, curr_prefix, curr_prefix_len);
+ strcpy (result + curr_prefix_len, pathname_tail);
+ return result;
+ }
+ }
+ }
+ /* Nothing to relocate. */
+ return pathname;
+}
+
+#endif
--- /dev/null
+/* Provide relocatable packages.
+ Copyright (C) 2003 Free Software Foundation, Inc.
+ Written by Bruno Haible <bruno@clisp.org>, 2003.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _RELOCATABLE_H
+#define _RELOCATABLE_H
+
+/* This can be enabled through the configure --enable-relocatable option. */
+#if ENABLE_RELOCATABLE
+
+/* When building a DLL, we must export some functions. Note that because
+ this is a private .h file, we don't need to use __declspec(dllimport)
+ in any case. */
+#if defined _MSC_VER && BUILDING_DLL
+# define RELOCATABLE_DLL_EXPORTED __declspec(dllexport)
+#else
+# define RELOCATABLE_DLL_EXPORTED
+#endif
+
+/* Sets the original and the current installation prefix of the package.
+ Relocation simply replaces a pathname starting with the original prefix
+ by the corresponding pathname with the current prefix instead. Both
+ prefixes should be directory names without trailing slash (i.e. use ""
+ instead of "/"). */
+extern RELOCATABLE_DLL_EXPORTED void
+ set_relocation_prefix (const char *orig_prefix,
+ const char *curr_prefix);
+
+/* Returns the pathname, relocated according to the current installation
+ directory. */
+extern const char * relocate (const char *pathname);
+
+/* Memory management: relocate() leaks memory, because it has to construct
+ a fresh pathname. If this is a problem because your program calls
+ relocate() frequently, think about caching the result. */
+
+/* Convenience function:
+ Computes the current installation prefix, based on the original
+ installation prefix, the original installation directory of a particular
+ file, and the current pathname of this file. Returns NULL upon failure. */
+extern const char * compute_curr_prefix (const char *orig_installprefix,
+ const char *orig_installdir,
+ const char *curr_pathname);
+
+#else
+
+/* By default, we use the hardwired pathnames. */
+#define relocate(pathname) (pathname)
+
+#endif
+
+#endif /* _RELOCATABLE_H */
-/* Implementation of the textdomain(3) function
- Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
- Written by Ulrich Drepper <drepper@gnu.org>, 1995.
+/* Implementation of the textdomain(3) function.
+ Copyright (C) 1995-1998, 2000, 2001, 2002 Free Software Foundation, Inc.
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software Foundation,
- Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
-#if defined STDC_HEADERS || defined _LIBC
-# include <stdlib.h>
-#endif
+#include <stdlib.h>
+#include <string.h>
-#if defined STDC_HEADERS || defined HAVE_STRING_H || defined _LIBC
-# include <string.h>
+#ifdef _LIBC
+# include <libintl.h>
#else
-# include <strings.h>
-# ifndef memcpy
-# define memcpy(Dst, Src, Num) bcopy (Src, Dst, Num)
-# endif
+# include "libgnuintl.h"
#endif
+#include "gettextP.h"
#ifdef _LIBC
-# include <libintl.h>
+/* We have to handle multi-threaded applications. */
+# include <bits/libc-lock.h>
#else
-# include "libgettext.h"
+/* Provide dummy implementation if this is outside glibc. */
+# define __libc_rwlock_define(CLASS, NAME)
+# define __libc_rwlock_wrlock(NAME)
+# define __libc_rwlock_unlock(NAME)
+#endif
+
+/* The internal variables in the standalone libintl.a must have different
+ names than the internal variables in GNU libc, otherwise programs
+ using libintl.a cannot be linked statically. */
+#if !defined _LIBC
+# define _nl_default_default_domain libintl_nl_default_default_domain
+# define _nl_current_default_domain libintl_nl_current_default_domain
#endif
/* @@ end of prolog @@ */
/* Name of the default text domain. */
-extern const char _nl_default_default_domain[];
+extern const char _nl_default_default_domain[] attribute_hidden;
/* Default text domain in which entries for gettext(3) are to be found. */
-extern const char *_nl_current_default_domain;
+extern const char *_nl_current_default_domain attribute_hidden;
/* Names for the libintl functions are a problem. They must not clash
prefix. So we have to make a difference here. */
#ifdef _LIBC
# define TEXTDOMAIN __textdomain
-# define strdup(str) __strdup (str)
+# ifndef strdup
+# define strdup(str) __strdup (str)
+# endif
#else
-# define TEXTDOMAIN textdomain__
+# define TEXTDOMAIN libintl_textdomain
#endif
+/* Lock variable to protect the global data in the gettext implementation. */
+__libc_rwlock_define (extern, _nl_state_lock attribute_hidden)
+
/* Set the current default message catalog to DOMAINNAME.
If DOMAINNAME is null, return the current default.
If DOMAINNAME is "", reset to the default of "messages". */
TEXTDOMAIN (domainname)
const char *domainname;
{
- char *old;
+ char *new_domain;
+ char *old_domain;
/* A NULL pointer requests the current setting. */
if (domainname == NULL)
return (char *) _nl_current_default_domain;
- old = (char *) _nl_current_default_domain;
+ __libc_rwlock_wrlock (_nl_state_lock);
+
+ old_domain = (char *) _nl_current_default_domain;
/* If domain name is the null string set to default domain "messages". */
if (domainname[0] == '\0'
|| strcmp (domainname, _nl_default_default_domain) == 0)
- _nl_current_default_domain = _nl_default_default_domain;
+ {
+ _nl_current_default_domain = _nl_default_default_domain;
+ new_domain = (char *) _nl_current_default_domain;
+ }
+ else if (strcmp (domainname, old_domain) == 0)
+ /* This can happen and people will use it to signal that some
+ environment variable changed. */
+ new_domain = old_domain;
else
{
/* If the following malloc fails `_nl_current_default_domain'
will be NULL. This value will be returned and so signals we
are out of core. */
#if defined _LIBC || defined HAVE_STRDUP
- _nl_current_default_domain = strdup (domainname);
+ new_domain = strdup (domainname);
#else
size_t len = strlen (domainname) + 1;
- char *cp = (char *) malloc (len);
- if (cp != NULL)
- memcpy (cp, domainname, len);
- _nl_current_default_domain = cp;
+ new_domain = (char *) malloc (len);
+ if (new_domain != NULL)
+ memcpy (new_domain, domainname, len);
#endif
+
+ if (new_domain != NULL)
+ _nl_current_default_domain = new_domain;
+ }
+
+ /* We use this possibility to signal a change of the loaded catalogs
+ since this is most likely the case and there is no other easy we
+ to do it. Do it only when the call was successful. */
+ if (new_domain != NULL)
+ {
+ ++_nl_msg_cat_cntr;
+
+ if (old_domain != new_domain && old_domain != _nl_default_default_domain)
+ free (old_domain);
}
- if (old != _nl_default_default_domain)
- free (old);
+ __libc_rwlock_unlock (_nl_state_lock);
- return (char *) _nl_current_default_domain;
+ return new_domain;
}
#ifdef _LIBC
+++ /dev/null
-# po2msg.sed - Convert Uniforum style .po file to X/Open style .msg file
-# Copyright (C) 1995 Free Software Foundation, Inc.
-# Ulrich Drepper <drepper@gnu.org>, 1995.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-#
-# The first directive in the .msg should be the definition of the
-# message set number. We use always set number 1.
-#
-1 {
- i\
-$set 1 # Automatically created by po2msg.sed
- h
- s/.*/0/
- x
-}
-#
-# We copy all comments into the .msg file. Perhaps they can help.
-#
-/^#/ s/^#[ ]*/$ /p
-#
-# We copy the original message as a comment into the .msg file.
-#
-/^msgid/ {
-# Does not work now
-# /"$/! {
-# s/\\$//
-# s/$/ ... (more lines following)"/
-# }
- s/^msgid[ ]*"\(.*\)"$/$ Original Message: \1/
- p
-}
-#
-# The .msg file contains, other then the .po file, only the translations
-# but each given a unique ID. Starting from 1 and incrementing by 1 for
-# each message we assign them to the messages.
-# It is important that the .po file used to generate the cat-id-tbl.c file
-# (with po-to-tbl) is the same as the one used here. (At least the order
-# of declarations must not be changed.)
-#
-/^msgstr/ {
- s/msgstr[ ]*"\(.*\)"/\1/
- x
-# The following nice solution is by
-# Bruno <Haible@ma2s2.mathematik.uni-karlsruhe.de>
- td
-# Increment a decimal number in pattern space.
-# First hide trailing `9' digits.
- :d
- s/9\(_*\)$/_\1/
- td
-# Assure at least one digit is available.
- s/^\(_*\)$/0\1/
-# Increment the last digit.
- s/8\(_*\)$/9\1/
- s/7\(_*\)$/8\1/
- s/6\(_*\)$/7\1/
- s/5\(_*\)$/6\1/
- s/4\(_*\)$/5\1/
- s/3\(_*\)$/4\1/
- s/2\(_*\)$/3\1/
- s/1\(_*\)$/2\1/
- s/0\(_*\)$/1\1/
-# Convert the hidden `9' digits to `0's.
- s/_/0/g
- x
-# Bring the line in the format `<number> <message>'
- G
- s/^[^\n]*$/& /
- s/\(.*\)\n\([0-9]*\)/\2 \1/
-# Clear flag from last substitution.
- tb
-# Append the next line.
- :b
- N
-# Look whether second part is a continuation line.
- s/\(.*\n\)"\(.*\)"/\1\2/
-# Yes, then branch.
- ta
- P
- D
-# Note that `D' includes a jump to the start!!
-# We found a continuation line. But before printing insert '\'.
- :a
- s/\(.*\)\(\n.*\)/\1\\\2/
- P
-# We cannot use the sed command `D' here
- s/.*\n\(.*\)/\1/
- tb
-}
-d
## Process this file with automake to produce Makefile.in -*- makefile -*-
-SUBDIRS = julcal @GMP_SUBDIRS@ misc dcdflib
-DIST_SUBDIRS = julcal gmp misc dcdflib
+SUBDIRS = julcal misc dcdflib
+DIST_SUBDIRS = julcal misc dcdflib
MAINTAINERCLEANFILES = Makefile.in
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
+@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_LIBS = @GMP_LIBS@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
-LOCAL_CC = @LOCAL_CC@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
-SUBDIRS = julcal @GMP_SUBDIRS@ misc dcdflib
-DIST_SUBDIRS = julcal gmp misc dcdflib
+SUBDIRS = julcal misc dcdflib
+DIST_SUBDIRS = julcal misc dcdflib
MAINTAINERCLEANFILES = Makefile.in
+subdir = lib
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES =
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
+ ps-recursive install-info-recursive uninstall-info-recursive \
+ all-recursive install-data-recursive install-exec-recursive \
+ installdirs-recursive install-recursive uninstall-recursive \
+ check-recursive installcheck-recursive
+DIST_COMMON = $(srcdir)/Makefile.in ChangeLog Makefile.am
+all: all-recursive
-TAR = tar
-GZIP_ENV = --best
-all: all-redirect
.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps lib/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu lib/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
-
-@SET_MAKE@
-
-all-recursive install-data-recursive install-exec-recursive \
-installdirs-recursive install-recursive uninstall-recursive \
-check-recursive installcheck-recursive info-recursive dvi-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
- @set fnord $(MAKEFLAGS); amf=$$2; \
+ @set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- rev="$$subdir $$rev"; \
- test "$$subdir" = "." && dot_seen=yes; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
done; \
- test "$$dot_seen" = "no" && rev=". $$rev"; \
+ rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
+ if (etags --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ else \
+ include_option=--include; \
+ fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
done; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
-mostlyclean-tags:
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
-clean-tags:
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = lib
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
- for subdir in $(DIST_SUBDIRS); do \
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
- chmod 777 $(distdir)/$$subdir; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
|| exit 1; \
fi; \
done
-info-am:
-info: info-recursive
-dvi-am:
-dvi: dvi-recursive
check-am: all-am
check: check-recursive
-installcheck-am:
-installcheck: installcheck-recursive
-install-exec-am:
-install-exec: install-exec-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
-install-data-am:
+install: install-recursive
+install-exec: install-exec-recursive
install-data: install-data-recursive
+uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-recursive
-uninstall-am:
-uninstall: uninstall-recursive
-all-am: Makefile
-all-redirect: all-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs: installdirs-recursive
-installdirs-am:
-
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-tags mostlyclean-generic
+clean: clean-recursive
-mostlyclean: mostlyclean-recursive
+clean-am: clean-generic mostlyclean-am
-clean-am: clean-tags clean-generic mostlyclean-am
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
-clean: clean-recursive
+dvi: dvi-recursive
-distclean-am: distclean-tags distclean-generic clean-am
+dvi-am:
-distclean: distclean-recursive
+info: info-recursive
-maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
- distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
-.PHONY: install-data-recursive uninstall-data-recursive \
-install-exec-recursive uninstall-exec-recursive installdirs-recursive \
-uninstalldirs-recursive all-recursive check-recursive \
-installcheck-recursive info-recursive dvi-recursive \
-mostlyclean-recursive distclean-recursive clean-recursive \
-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-install-exec install-data-am install-data install-am install \
-uninstall-am uninstall all-redirect all-am all installdirs-am \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+uninstall-info: uninstall-info-recursive
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
+ clean-generic clean-recursive ctags ctags-recursive distclean \
+ distclean-generic distclean-recursive distclean-tags distdir \
+ dvi dvi-am dvi-recursive info info-am info-recursive install \
+ install-am install-data install-data-am install-data-recursive \
+ install-exec install-exec-am install-exec-recursive \
+ install-info install-info-am install-info-recursive install-man \
+ install-recursive install-strip installcheck installcheck-am \
+ installdirs installdirs-am installdirs-recursive \
+ maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-recursive pdf pdf-am pdf-recursive ps ps-am \
+ ps-recursive tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am uninstall-info-recursive uninstall-recursive
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
+@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ../..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_LIBS = @GMP_LIBS@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
-LOCAL_CC = @LOCAL_CC@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
noinst_LIBRARIES = libdcdflib.a
-INCLUDES = -I$(srcdir) -I$(top_srcdir)/src -I$(top_srcdir) -I$(top_srcdir)/intl
+INCLUDES = -I$(srcdir) -I$(top_srcdir)/src -I$(top_srcdir) \
+-I$(top_srcdir)/intl
libdcdflib_a_SOURCES = dcdflib.c ipmpar.c
MAINTAINERCLEANFILES = Makefile.in
EXTRA_DIST = COPYING
+subdir = lib/dcdflib
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../../config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I../..
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-libdcdflib_a_LIBADD =
-libdcdflib_a_OBJECTS = dcdflib.o ipmpar.o
-AR = ar
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+libdcdflib_a_AR = $(AR) cru
+libdcdflib_a_LIBADD =
+am_libdcdflib_a_OBJECTS = dcdflib.$(OBJEXT) ipmpar.$(OBJEXT)
+libdcdflib_a_OBJECTS = $(am_libdcdflib_a_OBJECTS)
+
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/dcdflib.Po ./$(DEPDIR)/ipmpar.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-HEADERS = $(noinst_HEADERS)
-
-DIST_COMMON = README COPYING ChangeLog Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(libdcdflib_a_SOURCES)
+HEADERS = $(noinst_HEADERS)
-TAR = tar
-GZIP_ENV = --best
+DIST_COMMON = README $(noinst_HEADERS) $(srcdir)/Makefile.in COPYING \
+ ChangeLog Makefile.am
SOURCES = $(libdcdflib_a_SOURCES)
-OBJECTS = $(libdcdflib_a_OBJECTS)
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps lib/dcdflib/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+all: all-am
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu lib/dcdflib/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-mostlyclean-noinstLIBRARIES:
+AR = ar
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
- $(COMPILE) -c $<
-
-.s.o:
- $(COMPILE) -c $<
-
-.S.o:
- $(COMPILE) -c $<
+libdcdflib.a: $(libdcdflib_a_OBJECTS) $(libdcdflib_a_DEPENDENCIES)
+ -rm -f libdcdflib.a
+ $(libdcdflib_a_AR) libdcdflib.a $(libdcdflib_a_OBJECTS) $(libdcdflib_a_LIBADD)
+ $(RANLIB) libdcdflib.a
mostlyclean-compile:
- -rm -f *.o core *.core
-
-clean-compile:
+ -rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
-maintainer-clean-compile:
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dcdflib.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ipmpar.Po@am__quote@
-libdcdflib.a: $(libdcdflib_a_OBJECTS) $(libdcdflib_a_DEPENDENCIES)
- -rm -f libdcdflib.a
- $(AR) cru libdcdflib.a $(libdcdflib_a_OBJECTS) $(libdcdflib_a_LIBADD)
- $(RANLIB) libdcdflib.a
+.c.o:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
-mostlyclean-tags:
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
-clean-tags:
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = lib/dcdflib
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
-dcdflib.o: dcdflib.c cdflib.h
-ipmpar.o: ipmpar.c ../../config.h ../../pref.h
-
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(LIBRARIES) $(HEADERS)
-install-data-am:
+installdirs:
+install: install-am
+install-exec: install-exec-am
install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(HEADERS)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
- mostlyclean-tags mostlyclean-generic
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
-clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
- mostlyclean-am
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
-clean: clean-am
+dvi: dvi-am
-distclean-am: distclean-noinstLIBRARIES distclean-compile \
- distclean-tags distclean-generic clean-am
+dvi-am:
-distclean: distclean-am
+info: info-am
-maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
- maintainer-clean-compile maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+uninstall-am: uninstall-info-am
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am info \
+ info-am install install-am install-data install-data-am \
+ install-exec install-exec-am install-info install-info-am \
+ install-man install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags uninstall uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
imach[2] = sizeof (long) * 8 - 1;
imach[3] = INT_MAX;
-#if FPREP==FPREP_IEEE754
+#if FPREP_IEEE754
imach[4] = 2;
imach[5] = 24;
imach[6] = -125;
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
+@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ../..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_LIBS = @GMP_LIBS@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
-LOCAL_CC = @LOCAL_CC@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
noinst_LIBRARIES = libjulcal.a
-INCLUDES = -I$(srcdir) -I$(top_srcdir)/src -I$(top_srcdir) -I$(top_srcdir)/intl
+INCLUDES = -I$(srcdir) -I$(top_srcdir)/src -I$(top_srcdir) \
+-I$(top_srcdir)/intl
libjulcal_a_SOURCES = julcal.c
noinst_HEADERS = julcal.h
MAINTAINERCLEANFILES = Makefile.in
+subdir = lib/julcal
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../../config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I../..
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-libjulcal_a_LIBADD =
-libjulcal_a_OBJECTS = julcal.o
-AR = ar
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+libjulcal_a_AR = $(AR) cru
+libjulcal_a_LIBADD =
+am_libjulcal_a_OBJECTS = julcal.$(OBJEXT)
+libjulcal_a_OBJECTS = $(am_libjulcal_a_OBJECTS)
+
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/julcal.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-HEADERS = $(noinst_HEADERS)
-
-DIST_COMMON = README ChangeLog Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(libjulcal_a_SOURCES)
+HEADERS = $(noinst_HEADERS)
-TAR = tar
-GZIP_ENV = --best
+DIST_COMMON = README $(noinst_HEADERS) $(srcdir)/Makefile.in ChangeLog \
+ Makefile.am
SOURCES = $(libjulcal_a_SOURCES)
-OBJECTS = $(libjulcal_a_OBJECTS)
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps lib/julcal/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+all: all-am
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu lib/julcal/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-mostlyclean-noinstLIBRARIES:
+AR = ar
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
- $(COMPILE) -c $<
-
-.s.o:
- $(COMPILE) -c $<
-
-.S.o:
- $(COMPILE) -c $<
+libjulcal.a: $(libjulcal_a_OBJECTS) $(libjulcal_a_DEPENDENCIES)
+ -rm -f libjulcal.a
+ $(libjulcal_a_AR) libjulcal.a $(libjulcal_a_OBJECTS) $(libjulcal_a_LIBADD)
+ $(RANLIB) libjulcal.a
mostlyclean-compile:
- -rm -f *.o core *.core
-
-clean-compile:
+ -rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
-maintainer-clean-compile:
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/julcal.Po@am__quote@
-libjulcal.a: $(libjulcal_a_OBJECTS) $(libjulcal_a_DEPENDENCIES)
- -rm -f libjulcal.a
- $(AR) cru libjulcal.a $(libjulcal_a_OBJECTS) $(libjulcal_a_LIBADD)
- $(RANLIB) libjulcal.a
+.c.o:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
-mostlyclean-tags:
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
-clean-tags:
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = lib/julcal
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
-julcal.o: julcal.c julcal.h
-
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(LIBRARIES) $(HEADERS)
-install-data-am:
+installdirs:
+install: install-am
+install-exec: install-exec-am
install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES) $(HEADERS)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
- mostlyclean-tags mostlyclean-generic
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
-clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
- mostlyclean-am
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
-clean: clean-am
+dvi: dvi-am
-distclean-am: distclean-noinstLIBRARIES distclean-compile \
- distclean-tags distclean-generic clean-am
+dvi-am:
-distclean: distclean-am
+info: info-am
-maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
- maintainer-clean-compile maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+uninstall-am: uninstall-info-am
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am info \
+ info-am install install-am install-data install-data-am \
+ install-exec install-exec-am install-info install-info-am \
+ install-man install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags uninstall uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
-Wed Dec 10 21:59:16 2003 Ben Pfaff <blp@gnu.org>
-
- * getdelim.c, alloca.c: common.h is no longer, but alloc.h
- declares the allocation functions.
-
Sun Jan 2 21:35:47 2000 Ben Pfaff <blp@gnu.org>
* qsort.c: Change headers. Fix __attribute__ for gcc 2.7.2.
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
+@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ../..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_LIBS = @GMP_LIBS@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
-LOCAL_CC = @LOCAL_CC@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
noinst_LIBRARIES = libmisc.a
-INCLUDES = -I$(srcdir) -I$(top_srcdir)/src -I$(top_srcdir) -I$(top_srcdir)/intl
+INCLUDES = -I$(srcdir) -I$(top_srcdir)/src -I$(top_srcdir) \
+-I$(top_srcdir)/intl
libmisc_a_SOURCES = qsort.c getopt.c getopt1.c
libmisc_a_LIBADD = @ALLOCA@ @LIBOBJS@
libmisc_a_DEPENDENCIES = @ALLOCA@ @LIBOBJS@
-EXTRA_DIST = alloca.c getdelim.c getline.c memchr.c memcmp.c memcpy.c memmem.c memmove.c memset.c stpcpy.c strcasecmp.c strerror.c strncasecmp.c strpbrk.c strstr.c strtok_r.c strtol.c strtoul.c
+EXTRA_DIST = alloca.c getdelim.c getline.c memchr.c memcmp.c memcpy.c \
+memmem.c memmove.c memset.c stpcpy.c strcasecmp.c strerror.c \
+strncasecmp.c strpbrk.c strstr.c strtok_r.c strtol.c strtoul.c
MAINTAINERCLEANFILES = Makefile.in
+subdir = lib/misc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../../config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I../..
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-libmisc_a_OBJECTS = qsort.o getopt.o getopt1.o
-AR = ar
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+libmisc_a_AR = $(AR) cru
+am_libmisc_a_OBJECTS = qsort.$(OBJEXT) getopt.$(OBJEXT) \
+ getopt1.$(OBJEXT)
+libmisc_a_OBJECTS = $(am_libmisc_a_OBJECTS)
+
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/alloca.Po $(DEPDIR)/getdelim.Po \
+@AMDEP_TRUE@ $(DEPDIR)/getline.Po $(DEPDIR)/memchr.Po \
+@AMDEP_TRUE@ $(DEPDIR)/memcmp.Po $(DEPDIR)/memmem.Po \
+@AMDEP_TRUE@ $(DEPDIR)/memmove.Po $(DEPDIR)/memset.Po \
+@AMDEP_TRUE@ $(DEPDIR)/stpcpy.Po $(DEPDIR)/strcasecmp.Po \
+@AMDEP_TRUE@ $(DEPDIR)/strerror.Po $(DEPDIR)/strncasecmp.Po \
+@AMDEP_TRUE@ $(DEPDIR)/strpbrk.Po $(DEPDIR)/strtok_r.Po \
+@AMDEP_TRUE@ $(DEPDIR)/strtol.Po $(DEPDIR)/strtoul.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/getopt.Po ./$(DEPDIR)/getopt1.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/qsort.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON = ChangeLog Makefile.am Makefile.in alloca.c getdelim.c \
-getline.c memchr.c memcmp.c memmem.c memmove.c memset.c stpcpy.c \
-strcasecmp.c strerror.c strncasecmp.c strpbrk.c strtok_r.c strtol.c \
-strtoul.c
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-
-TAR = tar
-GZIP_ENV = --best
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(libmisc_a_SOURCES)
+DIST_COMMON = $(srcdir)/Makefile.in ChangeLog Makefile.am alloca.c \
+ getdelim.c getline.c memchr.c memcmp.c memmem.c memmove.c \
+ memset.c stpcpy.c strcasecmp.c strerror.c strncasecmp.c \
+ strpbrk.c strtok_r.c strtol.c strtoul.c
SOURCES = $(libmisc_a_SOURCES)
-OBJECTS = $(libmisc_a_OBJECTS)
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps lib/misc/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+all: all-am
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu lib/misc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-mostlyclean-noinstLIBRARIES:
+AR = ar
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-distclean-noinstLIBRARIES:
-
-maintainer-clean-noinstLIBRARIES:
-
-.c.o:
- $(COMPILE) -c $<
-
-.s.o:
- $(COMPILE) -c $<
-
-.S.o:
- $(COMPILE) -c $<
+libmisc.a: $(libmisc_a_OBJECTS) $(libmisc_a_DEPENDENCIES)
+ -rm -f libmisc.a
+ $(libmisc_a_AR) libmisc.a $(libmisc_a_OBJECTS) $(libmisc_a_LIBADD)
+ $(RANLIB) libmisc.a
mostlyclean-compile:
- -rm -f *.o core *.core
-
-clean-compile:
+ -rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
-maintainer-clean-compile:
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/alloca.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getdelim.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getline.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/memchr.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/memcmp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/memmem.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/memmove.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/memset.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/stpcpy.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strcasecmp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strerror.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strncasecmp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strpbrk.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtok_r.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtol.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtoul.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qsort.Po@am__quote@
-libmisc.a: $(libmisc_a_OBJECTS) $(libmisc_a_DEPENDENCIES)
- -rm -f libmisc.a
- $(AR) cru libmisc.a $(libmisc_a_OBJECTS) $(libmisc_a_LIBADD)
- $(RANLIB) libmisc.a
+.c.o:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
-mostlyclean-tags:
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
-clean-tags:
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = lib/misc
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
-getopt.o: getopt.c ../../config.h ../../pref.h
-getopt1.o: getopt1.c ../../config.h ../../pref.h
-qsort.o: qsort.c ../../config.h ../../pref.h ../../src/alloc.h
-
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(LIBRARIES)
-install-data-am:
+installdirs:
+install: install-am
+install-exec: install-exec-am
install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(LIBRARIES)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
- mostlyclean-tags mostlyclean-generic
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
-clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
- mostlyclean-am
+distclean: distclean-am
+ -rm -rf $(DEPDIR) ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
-clean: clean-am
+dvi: dvi-am
-distclean-am: distclean-noinstLIBRARIES distclean-compile \
- distclean-tags distclean-generic clean-am
+dvi-am:
-distclean: distclean-am
+info: info-am
-maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
- maintainer-clean-compile maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
+ -rm -rf $(DEPDIR) ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
-.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
-clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+uninstall-am: uninstall-info-am
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-tags distdir dvi dvi-am info \
+ info-am install install-am install-data install-data-am \
+ install-exec install-exec-am install-info install-info-am \
+ install-man install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+ ps ps-am tags uninstall uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
#include <config.h>
#include <stdlib.h>
+#include "common.h"
typedef void *pointer; /* generic pointer type */
#define NULL 0 /* null pointer constant */
#include <assert.h>
#include <stddef.h>
#include <stdio.h>
-#include "alloc.h"
+#include "common.h"
/* Reads a DELIMITER-separated field of any length from file STREAM.
*LINEPTR is a malloc'd string of size N; if *LINEPTR is NULL, it is
--- /dev/null
+/* Convenience header for conditional use of GNU <libintl.h>.
+ Copyright (C) 1995-1998, 2000-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _LIBGETTEXT_H
+#define _LIBGETTEXT_H 1
+
+/* NLS can be disabled through the configure --disable-nls option. */
+#if ENABLE_NLS
+
+/* Get declarations of GNU message catalog functions. */
+# include <libintl.h>
+
+#else
+
+/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
+ chokes if dcgettext is defined as a macro. So include it now, to make
+ later inclusions of <locale.h> a NOP. We don't include <libintl.h>
+ as well because people using "gettext.h" will not include <libintl.h>,
+ and also including <libintl.h> would fail on SunOS 4, whereas <locale.h>
+ is OK. */
+#if defined(__sun)
+# include <locale.h>
+#endif
+
+/* Disabled NLS.
+ The casts to 'const char *' serve the purpose of producing warnings
+ for invalid uses of the value returned from these functions.
+ On pre-ANSI systems without 'const', the config.h file is supposed to
+ contain "#define const". */
+# define gettext(Msgid) ((const char *) (Msgid))
+# define dgettext(Domainname, Msgid) ((const char *) (Msgid))
+# define dcgettext(Domainname, Msgid, Category) ((const char *) (Msgid))
+# define ngettext(Msgid1, Msgid2, N) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dngettext(Domainname, Msgid1, Msgid2, N) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define textdomain(Domainname) ((const char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+# define bind_textdomain_codeset(Domainname, Codeset) ((const char *) (Codeset))
+
+#endif
+
+/* A pseudo function call that serves as a marker for the automated
+ extraction of messages, but does not call gettext(). The run-time
+ translation is done at a different place in the code.
+ The argument, String, should be a literal string. Concatenated strings
+ and other string expressions won't work.
+ The macro's expansion is not parenthesized, so that it is suitable as
+ initializer for static 'char[]' or 'const char[]' variables. */
+#define gettext_noop(String) String
+
+#endif /* _LIBGETTEXT_H */
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-#
Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
+#
Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help)
Options:
-h, --help display this help and exit
-v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing - GNU libit 0.0"
+ echo "missing 0.4 - GNU automake"
;;
-*)
exit 1
;;
- aclocal)
+ aclocal*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acinclude.m4' or \`configure.in'. You might want
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`configure.in'. You might want to install the
+ you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acconfig.h' or \`configure.in'. You might want
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
touch $touch_files
;;
- automake)
+ automake*)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
while read f; do touch "$f"; done
;;
+ autom4te)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and you do not seem to have it handy on your
+ system. You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
bison|yacc)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
fi
;;
+ help2man)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ fi
+
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
makeinfo)
+ if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+ # We have makeinfo, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
touch $file
;;
+ tar)
+ shift
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ fi
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your
system. You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequirements for installing
+ it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
# mkinstalldirs --- make directory hierarchy
# Author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
-# Last modified: 1994-03-25
# Public domain
errstatus=0
+dirmode=""
-for file in ${1+"$@"} ; do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
- pathcomp=
- for d in ${1+"$@"} ; do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage" 1>&2
+ exit 0
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+case $dirmode in
+ '')
+ if mkdir -p -- . 2>/dev/null; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ fi
+ ;;
+esac
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp" 1>&2
- mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
- fi
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- fi
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
- pathcomp="$pathcomp/"
- done
+ pathcomp="$pathcomp/"
+ done
done
exit $errstatus
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
# mkinstalldirs ends here
-Sat Jan 1 23:27:03 2000 Ben Pfaff <blp@gnu.org>
+2003-12-08 gettextize <bug-gnu-gettext@gnu.org>
- * POTFILES.in: Update.
+ * Makefile.in.in: New file, from gettext-0.12.1.
+ * Rules-quot: New file, from gettext-0.12.1.
+ * boldquot.sed: New file, from gettext-0.12.1.
+ * en@boldquot.header: New file, from gettext-0.12.1.
+ * en@quot.header: New file, from gettext-0.12.1.
+ * insert-header.sin: New file, from gettext-0.12.1.
+ * quot.sed: New file, from gettext-0.12.1.
+ * remove-potcdate.sin: New file, from gettext-0.12.1.
-Thu Jan 8 22:27:38 1998 Ben Pfaff <blp@gnu.org>
-
- * POTFILES.in: Recreate.
-
- * Makefile.in.in: Upcase `pspp' within maintainer-clean target.
-
-Tue Dec 2 14:35:47 1997 Ben Pfaff <blp@gnu.org>
-
- * POTFILES.in: Add src/aggregate.c; alphabetize.
-
-Wed Oct 8 15:53:13 1997 Ben Pfaff <blp@gnu.org>
-
- * Makefile.in.in: Updated to gettext-0.10.32 while retaining local
- fixes.
-
-Tue Oct 7 20:22:25 1997 Ben Pfaff <blp@gnu.org>
-
- * Makefile.in.in: Maintainer-cleans Makefile.
-
-Thu Jul 17 01:51:23 1997 Ben Pfaff <blp@gnu.org>
-
- * POTFILES.in: Remove src/display.c.
-
-Sat Jul 5 23:44:30 1997 Ben Pfaff <blp@gnu.org>
-
- * POTFILES.in: Fix file list.
-
-Tue Jun 3 23:29:57 1997 Ben Pfaff <blp@gnu.org>
-
- * Makefile.in.in: Maintainer-cleans fiasco.pot.
-
-Mon Jun 2 14:22:59 1997 Ben Pfaff <blp@gnu.org>
-
- * Makefile.in.in: Maintainer-cleans cat-id-tbl.c, stamp-cat-id.
-
- * POTFILES.in: Added all the files that have internationalized
- strings; basically this is `grep -l `find . -name \*.[qc]`'.
-
-Sun Jun 1 23:36:32 1997 Ben Pfaff <blp@gnu.org>
-
- * Makefile.in.in: New file, taken from gettext-0.10.27.
-
- * POTFILES.in: New file (empty).
-
-----------------------------------------------------------------------
-Local Variables:
-mode: change-log
-version-control: never
-End:
--- /dev/null
+# Available languages
+
-# Makefile for program source directory in GNU NLS utilities package.
-# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper@gnu.org>
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
-# This file file be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
PACKAGE = @PACKAGE@
VERSION = @VERSION@
prefix = @prefix@
exec_prefix = @exec_prefix@
-datadir = $(prefix)/@DATADIRNAME@
+datadir = @datadir@
localedir = $(datadir)/locale
-gnulocaledir = $(prefix)/share/locale
-gettextsrcdir = $(prefix)/share/gettext/po
-subdir = po
+gettextsrcdir = $(datadir)/gettext/po
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
-MKINSTALLDIRS = $(top_srcdir)/@MKINSTALLDIRS@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
-CC = @CC@
-GENCAT = @GENCAT@
-GMSGFMT = PATH=../src:$$PATH @GMSGFMT@
+GMSGFMT = @GMSGFMT@
MSGFMT = @MSGFMT@
-XGETTEXT = PATH=../src:$$PATH @XGETTEXT@
-MSGMERGE = PATH=../src:$$PATH msgmerge
+XGETTEXT = @XGETTEXT@
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
-DEFS = @DEFS@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-
-INCLUDES = -I.. -I$(top_srcdir)/intl
-
-COMPILE = $(CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS) $(XCFLAGS)
-
-SOURCES = cat-id-tbl.c
POFILES = @POFILES@
GMOFILES = @GMOFILES@
-DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(PACKAGE).pot \
-stamp-cat-id $(POFILES) $(GMOFILES) $(SOURCES)
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
POTFILES = \
CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-INSTOBJEXT = @INSTOBJEXT@
-.SUFFIXES:
-.SUFFIXES: .c .o .po .pox .gmo .mo .msg .cat
+# Makevars gets inserted here. (Don't remove this line!)
-.c.o:
- $(COMPILE) $<
-
-.po.pox:
- $(MAKE) $(PACKAGE).pot
- $(MSGMERGE) $< $(srcdir)/$(PACKAGE).pot -o $*.pox
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
.po.mo:
- $(MSGFMT) -o $@ $<
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
.po.gmo:
- file=$(srcdir)/`echo $* | sed 's,.*/,,'`.gmo \
- && rm -f $$file && $(GMSGFMT) -o $$file $<
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
-.po.cat:
- sed -f ../intl/po2msg.sed < $< > $*.msg \
- && rm -f $@ && $(GENCAT) $@ $*.msg
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
all: all-@USE_NLS@
-all-yes: cat-id-tbl.c $(CATALOGS)
+all-yes: stamp-po
all-no:
-$(srcdir)/$(PACKAGE).pot: $(POTFILES)
- $(XGETTEXT) --default-domain=$(PACKAGE) --directory=$(top_srcdir) \
- --add-comments --keyword=_ --keyword=N_ \
- --files-from=$(srcdir)/POTFILES.in
- rm -f $(srcdir)/$(PACKAGE).pot
- mv $(PACKAGE).po $(srcdir)/$(PACKAGE).pot
-
-$(srcdir)/cat-id-tbl.c: stamp-cat-id; @:
-$(srcdir)/stamp-cat-id: $(PACKAGE).pot
- rm -f cat-id-tbl.tmp
- sed -f ../intl/po2tbl.sed $(srcdir)/$(PACKAGE).pot \
- | sed -e "s/@PACKAGE NAME@/$(PACKAGE)/" > cat-id-tbl.tmp
- if cmp -s cat-id-tbl.tmp $(srcdir)/cat-id-tbl.c; then \
- rm cat-id-tbl.tmp; \
- else \
- echo cat-id-tbl.c changed; \
- rm -f $(srcdir)/cat-id-tbl.c; \
- mv cat-id-tbl.tmp $(srcdir)/cat-id-tbl.c; \
- fi
- cd $(srcdir) && rm -f stamp-cat-id && echo timestamp > stamp-cat-id
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ test -z "$(CATALOGS)" || $(MAKE) $(CATALOGS)
+ @echo "touch stamp-po"
+ @echo timestamp > stamp-poT
+ @mv stamp-poT stamp-po
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
install: install-exec install-data
install-exec:
install-data: install-data-@USE_NLS@
-install-data-no: all
-install-data-yes: all
- if test -r $(MKINSTALLDIRS); then \
- $(MKINSTALLDIRS) $(datadir); \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
else \
- $(top_srcdir)/mkinstalldirs $(datadir); \
+ : ; \
fi
+install-data-no: all
+install-data-yes: all
+ $(mkinstalldirs) $(DESTDIR)$(datadir)
@catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
- case "$$cat" in \
- *.gmo) destdir=$(gnulocaledir);; \
- *) destdir=$(localedir);; \
- esac; \
- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
- dir=$$destdir/$$lang/LC_MESSAGES; \
- if test -r $(MKINSTALLDIRS); then \
- $(MKINSTALLDIRS) $$dir; \
- else \
- $(top_srcdir)/mkinstalldirs $$dir; \
- fi; \
- if test -r $$cat; then \
- $(INSTALL_DATA) $$cat $$dir/$(PACKAGE)$(INSTOBJEXT); \
- echo "installing $$cat as $$dir/$(PACKAGE)$(INSTOBJEXT)"; \
- else \
- $(INSTALL_DATA) $(srcdir)/$$cat $$dir/$(PACKAGE)$(INSTOBJEXT); \
- echo "installing $(srcdir)/$$cat as" \
- "$$dir/$(PACKAGE)$(INSTOBJEXT)"; \
- fi; \
- if test -r $$cat.m; then \
- $(INSTALL_DATA) $$cat.m $$dir/$(PACKAGE)$(INSTOBJEXT).m; \
- echo "installing $$cat.m as $$dir/$(PACKAGE)$(INSTOBJEXT).m"; \
- else \
- if test -r $(srcdir)/$$cat.m ; then \
- $(INSTALL_DATA) $(srcdir)/$$cat.m \
- $$dir/$(PACKAGE)$(INSTOBJEXT).m; \
- echo "installing $(srcdir)/$$cat as" \
- "$$dir/$(PACKAGE)$(INSTOBJEXT).m"; \
- else \
- true; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkinstalldirs) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
fi; \
- fi; \
+ done; \
done
- if test "$(PACKAGE)" = "gettext"; then \
- if test -r $(MKINSTALLDIRS); then \
- $(MKINSTALLDIRS) $(gettextsrcdir); \
- else \
- $(top_srcdir)/mkinstalldirs $(gettextsrcdir); \
- fi; \
- $(INSTALL_DATA) $(srcdir)/Makefile.in.in \
- $(gettextsrcdir)/Makefile.in.in; \
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
else \
: ; \
fi
+installdirs-data-no:
+installdirs-data-yes:
+ $(mkinstalldirs) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkinstalldirs) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
# Define this as empty until I found a useful application.
installcheck:
-uninstall:
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
catalogs='$(CATALOGS)'; \
for cat in $$catalogs; do \
cat=`basename $$cat`; \
- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
- rm -f $(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \
- rm -f $(localedir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \
- rm -f $(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT); \
- rm -f $(gnulocaledir)/$$lang/LC_MESSAGES/$(PACKAGE)$(INSTOBJEXT).m; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
done
- rm -f $(gettextsrcdir)/po-Makefile.in.in
check: all
-cat-id-tbl.o: ../intl/libgettext.h
-
-dvi info tags TAGS ID:
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
mostlyclean:
- rm -f core core.* *.pox $(PACKAGE).po *.old.po cat-id-tbl.tmp
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
rm -fr *.o
clean: mostlyclean
distclean: clean
- rm -f Makefile Makefile.in POTFILES *.mo *.msg *.cat *.cat.m
+ rm -f Makefile Makefile.in POTFILES *.mo
maintainer-clean: distclean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
- rm -f $(GMOFILES) Makefile PSPP.pot cat-id-tbl.c stamp-cat-id
-
-distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
-dist distdir: update-po $(DISTFILES)
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(DISTFILES)
dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
for file in $$dists; do \
- ln $(srcdir)/$$file $(distdir) 2> /dev/null \
- || cp -p $(srcdir)/$$file $(distdir); \
+ if test -f $$file; then \
+ cp -p $$file $(distdir); \
+ else \
+ cp -p $(srcdir)/$$file $(distdir); \
+ fi; \
done
update-po: Makefile
- $(MAKE) $(PACKAGE).pot
- PATH=`pwd`/../src:$$PATH; \
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
cd $(srcdir); \
- catalogs='$(CATALOGS)'; \
- for cat in $$catalogs; do \
- cat=`basename $$cat`; \
- lang=`echo $$cat | sed 's/\$(CATOBJEXT)$$//'`; \
- mv $$lang.po $$lang.old.po; \
- echo "$$lang:"; \
- if $(MSGMERGE) $$lang.old.po $(PACKAGE).pot -o $$lang.po; then \
- rm -f $$lang.old.po; \
+ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
else \
- echo "msgmerge for $$cat failed!"; \
- rm -f $$lang.po; \
- mv $$lang.old.po $$lang.po; \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
fi; \
- done
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
-POTFILES: POTFILES.in
- ( if test 'x$(srcdir)' != 'x.'; then \
- posrcprefix='$(top_srcdir)/'; \
- else \
- posrcprefix="../"; \
- fi; \
- rm -f $@-t $@ \
- && (sed -e '/^#/d' -e '/^[ ]*$$/d' \
- -e "s@.*@ $$posrcprefix& \\\\@" < $(srcdir)/$@.in \
- | sed -e '$$s/\\$$//') > $@-t \
- && chmod a-w $@-t \
- && mv $@-t $@ )
-
-Makefile: Makefile.in.in ../config.status POTFILES
- cd .. \
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
&& CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
$(SHELL) ./config.status
+force:
+
# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
--- /dev/null
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = fiasco-dev@gnu.org
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
# List of source files containing translatable strings.
-# Copyright (C) 1997-9, 2000 Free Software Foundation, Inc.
+# Copyright (C) 1997 Free Software Foundation, Inc.
# Common library files
lib/misc/strtol.c
# Package source files
src/aggregate.c
-src/alloc.c
-src/expr-evl.c
-src/expr-prs.c
-src/expr-opt.c
-src/debug-print.h
-src/alloc.h
-src/approx.h
-src/avl.c
-src/avl.h
-src/hash.c
-src/bitvector.h
-src/filename.c
-src/apply-dict.c
-src/filename.h
-src/hash.h
-src/heap.c
-src/heap.h
-src/pool.c
-src/pool.h
-src/stat.h
-src/str.c
-src/str.h
+src/ascii.c
+src/autorecode.c
+src/cases.c
+src/cmdline.c
+src/command.c
+src/compute.c
+src/count.c
src/data-in.c
-src/data-in.h
src/data-list.c
+src/data-out.c
src/dfm.c
-src/dfm.h
-src/file-handle.h
-src/file-handle.q
+src/do-if.c
+src/error.c
+src/expr-evl.c
+src/expr-opt.c
+src/expr-prs.c
src/file-type.c
+src/filename.c
src/format.c
-src/format.h
src/formats.c
src/get.c
-src/inpt-pgm.c
-src/inpt-pgm.h
-src/matrix-data.c
-src/pfm-read.c
-src/pfm-write.c
-src/pfm.h
-src/sfm-read.c
-src/sfm-write.c
-src/sfm.h
-src/sfmP.h
-src/sysfile-info.c
-src/exprP.h
-src/expr.h
-src/command.c
-src/command.h
src/getline.c
-src/getline.h
-src/lexer.c
-src/lexer.h
-src/cmdline.c
-src/error.c
-src/error.h
src/glob.c
-src/main.c
-src/main.h
-src/misc.c
-src/misc.h
-src/version.h
-src/ascii.c
-src/magic.c
-src/magic.h
-src/matrix.c
-src/matrix.h
-src/random.c
-src/random.h
-src/stats.c
-src/stats.h
-src/cases.c
-src/data-out.c
-src/font.h
src/groff-font.c
+src/hash.c
+src/heap.c
src/html.c
-src/htmlP.h
-src/log.h
-src/output.c
-src/output.h
-src/postscript.c
-src/som.c
-src/som.h
-src/tab.c
-src/tab.h
-src/do-if.c
-src/correlations.q
-src/crosstabs.q
-src/descript.q
-src/frequencies.q
-src/list.q
-src/means.q
-src/t-test.q
-src/cases.h
-src/count.c
-src/var.h
-src/vars-atr.c
-src/vars-prs.c
-src/vfm.c
-src/vfm.h
-src/vfmP.h
-src/autorecode.c
-src/compute.c
-src/flip.c
-src/print.c
-src/recode.c
-src/sel-if.c
-src/sort.c
-src/sort.h
-src/do-ifP.h
src/include.c
+src/inpt-pgm.c
+src/lexer.c
src/loop.c
-src/repeat.c
+src/main.c
src/mis-val.c
+src/misc.c
src/modify-vars.c
src/numeric.c
+src/output.c
+src/postscript.c
+src/print.c
+src/q2c.c
+src/recode.c
src/rename-vars.c
+src/repeat.c
src/sample.c
-src/set.q
-src/settings.h
+src/sel-if.c
+src/sfm-read.c
+src/sfm-write.c
+src/som.c
+src/sort.c
src/split-file.c
+src/stats.c
+src/str.c
+src/sysfile-info.c
+src/tab.c
src/temporary.c
src/title.c
src/val-labs.c
src/var-labs.c
+src/vars-atr.c
+src/vars-prs.c
src/vector.c
-src/vector.h
+src/vfm.c
src/weight.c
-
--- /dev/null
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en@quot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
--- /dev/null
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“\e[1m/g
+s/”/\e[0m”/g
+s/‘/‘\e[1m/g
+s/’/\e[0m’/g
--- /dev/null
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
--- /dev/null
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
--- /dev/null
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
--- /dev/null
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
--- /dev/null
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
\f
/* CPUs. */
-/* Check that the floating-point representation is one that we
- understand. */
-#if FPREP==FPREP_IEEE754
-
#if SIZEOF_DOUBLE == 8
#define second_lowest_flt64 second_lowest_value
#else
#error Must define second_lowest_flt64 for your architecture.
#endif
-/* This trick borrowed from gcc-lib/.../include/float.h. */
-#if __GNUC__ && (ENDIAN==BIG || ENDIAN==LITTLE)
-#ifndef __DBL_UNION__
-#define __DBL_UNION__
-union blp_convert_double {
- unsigned char convert_double_i[8];
- double convert_double_d;
-};
-#endif /* !defined __DBL_UNION__ */
-#if ENDIAN==LITTLE
-#define SECOND_LOWEST_VALUE \
- (__extension__ ((union blp_convert_double) \
- {{0xfe,0xff,0xff,0xff, 0xff,0xff,0xef,0xff}}) \
- .convert_double_d)
-#elif ENDIAN==BIG
-#define SECOND_LOWEST_VALUE \
- (__extension__ ((union blp_convert_double) \
- {{0xff,0xef,0xff,0xff, 0xff,0xff,0xff,0xfe}}) \
- .convert_double_d)
-#endif /* endianness */
-#endif /* __GNUC__ and known endianness */
-
-#else /* FPREP != FPREP_IEEE754 */
-#error Floating point representation must be known at compile time.
-#endif /* fprep */
-
/* Figure out which integer type on this system is a signed 32-bit
integer. */
#if SIZEOF_SHORT==4
-Thu Dec 11 15:13:58 WST 2003 John Darrington <john@darrington.wattle.id.au>
-
- * output.c: Fixed a bug where pspp would crash if it couldn't find
- its startup files.
-
-Thu Dec 11 15:09:04 WST 2003 John Darrington <john@darrington.wattle.id.au>
-
- * frequencies.q: Fixed a bug where the program would crash if more that one 'FREQUENCIES' command appeared in a file.
-
-Wed Dec 10 22:03:32 2003 Ben Pfaff <blp@gnu.org>
-
- * glob.c: Add #include <stdio.h> the readline.h #include, which
- fixes problems for some readline versions that refer to FILE but
- don't #include <stdio.h> themselves.
-
Sun Jan 2 21:40:13 2000 Ben Pfaff <blp@gnu.org>
* Makefile.am: Reorganized. Put locale dir in version.c instead
var-labs.c var.h vars-atr.c vars-prs.c vector.c vector.h version.c \
version.h vfm.c vfm.h vfmP.h weight.c
-GMP_LIBS = ../lib/gmp/mpf/libmpf.a \
- ../lib/gmp/mpn/libmpn.a \
- ../lib/gmp/libgmp.a
-
LDADD = ../lib/julcal/libjulcal.a \
../lib/misc/libmisc.a \
../lib/dcdflib/libdcdflib.a \
- @GMP_LIBS@ @INTLLIBS@
+ @LIBINTL@
version.c:
echo "#include <config.h>" > version.c
echo " \"/usr/share/groff/font\";" >> version.c
echo "const char locale_dir[] = \"$(datadir)/locale\";" >> version.c
\f
-# q2c
-
-LOCAL_CC = @LOCAL_CC@
-LOCAL_COMPILE = $(LOCAL_CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
-LOCAL_LINK = $(LOCAL_CC) $(LDFLAGS) -o $@
-q2c.o: q2c.c
- $(LOCAL_COMPILE) $< -o q2c.o
-q2c: q2c.o
- $(LOCAL_LINK) q2c.o ../lib/misc/libmisc.a -o q2c
-
-CLEANFILES = q2c
-MAINTAINERCLEANFILES = Makefile.in
+noinst_PROGRAMS = q2c
+q2c_SOURCES = q2c.c
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-# PSPP
-
+@SET_MAKE@
-SHELL = @SHELL@
+# PSPP
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
bin_PROGRAMS = pspp
-INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/src -I$(top_srcdir)/lib -I$(top_srcdir)/intl
+INCLUDES = -I$(top_srcdir) -I$(top_srcdir)/src -I$(top_srcdir)/lib \
+-I$(top_srcdir)/intl
DISTCLEANFILES = foo $(q_sources_c)
ETAGS_ARGS = -l c $(q_sources_c)
SUFFIXES = .q
-q_sources_c = correlations.c crosstabs.c descript.c file-handle.c frequencies.c list.c means.c set.c t-test.c
-
-
-q_sources_q = correlations.q crosstabs.q descript.q file-handle.q frequencies.q list.q means.q set.q t-test.q
-
+q_sources_c = correlations.c crosstabs.c descript.c file-handle.c \
+frequencies.c list.c means.c set.c t-test.c
-pspp_SOURCES = aggregate.c alloc.c alloc.h apply-dict.c approx.h ascii.c autorecode.c avl.c avl.h bitvector.h cases.c cases.h cmdline.c command.c command.def command.h compute.c correlations.c count.c crosstabs.c data-in.c data-in.h data-list.c data-out.c debug-print.h descript.c dfm.c dfm.h do-if.c do-ifP.h error.c error.h expr-evl.c expr-opt.c expr-prs.c expr.h exprP.h file-handle.c file-handle.h file-type.c filename.c filename.h flip.c font.h format.c format.def format.h formats.c frequencies.c frequencies.g get.c getline.c getline.h glob.c groff-font.c hash.c hash.h heap.c heap.h html.c htmlP.h include.c inpt-pgm.c inpt-pgm.h lexer.c lexer.h list.c log.h loop.c magic.c magic.h main.c main.h matrix-data.c matrix.c matrix.h means.c mis-val.c misc.c misc.h modify-vars.c numeric.c output.c output.h pfm-read.c pfm-write.c pfm.h pool.c pool.h postscript.c print.c random.c random.h recode.c rename-vars.c repeat.c sample.c sel-if.c set.c settings.h sfm-read.c sfm-write.c sfm.h sfmP.h som.c som.h sort.c sort.h split-file.c stat.h stats.c stats.h str.c str.h sysfile-info.c tab.c tab.h temporary.c title.c t-test.c val-labs.c var-labs.c var.h vars-atr.c vars-prs.c vector.c vector.h version.c version.h vfm.c vfm.h vfmP.h weight.c
+q_sources_q = correlations.q crosstabs.q descript.q file-handle.q \
+frequencies.q list.q means.q set.q t-test.q
-GMP_LIBS = ../lib/gmp/mpf/libmpf.a ../lib/gmp/mpn/libmpn.a ../lib/gmp/libgmp.a
+pspp_SOURCES = aggregate.c alloc.c alloc.h apply-dict.c approx.h \
+ascii.c autorecode.c avl.c avl.h bitvector.h cases.c cases.h cmdline.c \
+command.c command.def command.h compute.c correlations.c count.c \
+crosstabs.c data-in.c data-in.h data-list.c data-out.c debug-print.h \
+descript.c dfm.c dfm.h do-if.c do-ifP.h error.c error.h expr-evl.c \
+expr-opt.c expr-prs.c expr.h exprP.h file-handle.c file-handle.h \
+file-type.c filename.c filename.h flip.c font.h format.c format.def \
+format.h formats.c frequencies.c frequencies.g get.c getline.c \
+getline.h glob.c groff-font.c hash.c hash.h heap.c heap.h html.c \
+htmlP.h include.c inpt-pgm.c inpt-pgm.h lexer.c lexer.h list.c log.h \
+loop.c magic.c magic.h main.c main.h matrix-data.c matrix.c matrix.h \
+means.c mis-val.c misc.c misc.h modify-vars.c numeric.c output.c \
+output.h pfm-read.c pfm-write.c pfm.h pool.c pool.h postscript.c \
+print.c random.c random.h recode.c rename-vars.c repeat.c sample.c \
+sel-if.c set.c settings.h sfm-read.c sfm-write.c sfm.h sfmP.h som.c \
+som.h sort.c sort.h split-file.c stat.h stats.c stats.h str.c str.h \
+sysfile-info.c tab.c tab.h temporary.c title.c t-test.c val-labs.c \
+var-labs.c var.h vars-atr.c vars-prs.c vector.c vector.h version.c \
+version.h vfm.c vfm.h vfmP.h weight.c
-LDADD = ../lib/julcal/libjulcal.a ../lib/misc/libmisc.a ../lib/dcdflib/libdcdflib.a @GMP_LIBS@ @INTLLIBS@
-# q2c
+LDADD = ../lib/julcal/libjulcal.a \
+ ../lib/misc/libmisc.a \
+ ../lib/dcdflib/libdcdflib.a \
+ @LIBINTL@
-LOCAL_CC = @LOCAL_CC@
-LOCAL_COMPILE = $(LOCAL_CC) -c $(DEFS) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
-LOCAL_LINK = $(LOCAL_CC) $(LDFLAGS) -o $@
-CLEANFILES = q2c
+noinst_PROGRAMS = q2c
+q2c_SOURCES = q2c.c
+subdir = src
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES =
-PROGRAMS = $(bin_PROGRAMS)
-
-
-DEFS = @DEFS@ -I. -I$(srcdir) -I..
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
-pspp_OBJECTS = aggregate.o alloc.o apply-dict.o ascii.o autorecode.o \
-avl.o cases.o cmdline.o command.o compute.o correlations.o count.o \
-crosstabs.o data-in.o data-list.o data-out.o descript.o dfm.o do-if.o \
-error.o expr-evl.o expr-opt.o expr-prs.o file-handle.o file-type.o \
-filename.o flip.o format.o formats.o frequencies.o get.o getline.o \
-glob.o groff-font.o hash.o heap.o html.o include.o inpt-pgm.o lexer.o \
-list.o loop.o magic.o main.o matrix-data.o matrix.o means.o mis-val.o \
-misc.o modify-vars.o numeric.o output.o pfm-read.o pfm-write.o pool.o \
-postscript.o print.o random.o recode.o rename-vars.o repeat.o sample.o \
-sel-if.o set.o sfm-read.o sfm-write.o som.o sort.o split-file.o stats.o \
-str.o sysfile-info.o tab.o temporary.o title.o t-test.o val-labs.o \
-var-labs.o vars-atr.o vars-prs.o vector.o version.o vfm.o weight.o
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+bin_PROGRAMS = pspp$(EXEEXT)
+noinst_PROGRAMS = q2c$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(noinst_PROGRAMS)
+
+am_pspp_OBJECTS = aggregate.$(OBJEXT) alloc.$(OBJEXT) \
+ apply-dict.$(OBJEXT) ascii.$(OBJEXT) autorecode.$(OBJEXT) \
+ avl.$(OBJEXT) cases.$(OBJEXT) cmdline.$(OBJEXT) \
+ command.$(OBJEXT) compute.$(OBJEXT) correlations.$(OBJEXT) \
+ count.$(OBJEXT) crosstabs.$(OBJEXT) data-in.$(OBJEXT) \
+ data-list.$(OBJEXT) data-out.$(OBJEXT) descript.$(OBJEXT) \
+ dfm.$(OBJEXT) do-if.$(OBJEXT) error.$(OBJEXT) \
+ expr-evl.$(OBJEXT) expr-opt.$(OBJEXT) expr-prs.$(OBJEXT) \
+ file-handle.$(OBJEXT) file-type.$(OBJEXT) filename.$(OBJEXT) \
+ flip.$(OBJEXT) format.$(OBJEXT) formats.$(OBJEXT) \
+ frequencies.$(OBJEXT) get.$(OBJEXT) getline.$(OBJEXT) \
+ glob.$(OBJEXT) groff-font.$(OBJEXT) hash.$(OBJEXT) \
+ heap.$(OBJEXT) html.$(OBJEXT) include.$(OBJEXT) \
+ inpt-pgm.$(OBJEXT) lexer.$(OBJEXT) list.$(OBJEXT) \
+ loop.$(OBJEXT) magic.$(OBJEXT) main.$(OBJEXT) \
+ matrix-data.$(OBJEXT) matrix.$(OBJEXT) means.$(OBJEXT) \
+ mis-val.$(OBJEXT) misc.$(OBJEXT) modify-vars.$(OBJEXT) \
+ numeric.$(OBJEXT) output.$(OBJEXT) pfm-read.$(OBJEXT) \
+ pfm-write.$(OBJEXT) pool.$(OBJEXT) postscript.$(OBJEXT) \
+ print.$(OBJEXT) random.$(OBJEXT) recode.$(OBJEXT) \
+ rename-vars.$(OBJEXT) repeat.$(OBJEXT) sample.$(OBJEXT) \
+ sel-if.$(OBJEXT) set.$(OBJEXT) sfm-read.$(OBJEXT) \
+ sfm-write.$(OBJEXT) som.$(OBJEXT) sort.$(OBJEXT) \
+ split-file.$(OBJEXT) stats.$(OBJEXT) str.$(OBJEXT) \
+ sysfile-info.$(OBJEXT) tab.$(OBJEXT) temporary.$(OBJEXT) \
+ title.$(OBJEXT) t-test.$(OBJEXT) val-labs.$(OBJEXT) \
+ var-labs.$(OBJEXT) vars-atr.$(OBJEXT) vars-prs.$(OBJEXT) \
+ vector.$(OBJEXT) version.$(OBJEXT) vfm.$(OBJEXT) \
+ weight.$(OBJEXT)
+pspp_OBJECTS = $(am_pspp_OBJECTS)
pspp_LDADD = $(LDADD)
-pspp_DEPENDENCIES = ../lib/julcal/libjulcal.a ../lib/misc/libmisc.a \
-../lib/dcdflib/libdcdflib.a
-pspp_LDFLAGS =
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+pspp_DEPENDENCIES = ../lib/julcal/libjulcal.a ../lib/misc/libmisc.a \
+ ../lib/dcdflib/libdcdflib.a
+pspp_LDFLAGS =
+am_q2c_OBJECTS = q2c.$(OBJEXT)
+q2c_OBJECTS = $(am_q2c_OBJECTS)
+q2c_LDADD = $(LDADD)
+q2c_DEPENDENCIES = ../lib/julcal/libjulcal.a ../lib/misc/libmisc.a \
+ ../lib/dcdflib/libdcdflib.a
+q2c_LDFLAGS =
+
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/aggregate.Po ./$(DEPDIR)/alloc.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/apply-dict.Po ./$(DEPDIR)/ascii.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/autorecode.Po ./$(DEPDIR)/avl.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/cases.Po ./$(DEPDIR)/cmdline.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/command.Po ./$(DEPDIR)/compute.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/correlations.Po ./$(DEPDIR)/count.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/crosstabs.Po ./$(DEPDIR)/data-in.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/data-list.Po ./$(DEPDIR)/data-out.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/descript.Po ./$(DEPDIR)/dfm.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/do-if.Po ./$(DEPDIR)/error.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/expr-evl.Po ./$(DEPDIR)/expr-opt.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/expr-prs.Po ./$(DEPDIR)/file-handle.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/file-type.Po ./$(DEPDIR)/filename.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/flip.Po ./$(DEPDIR)/format.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/formats.Po ./$(DEPDIR)/frequencies.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/get.Po ./$(DEPDIR)/getline.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/glob.Po ./$(DEPDIR)/groff-font.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/hash.Po ./$(DEPDIR)/heap.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/html.Po ./$(DEPDIR)/include.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/inpt-pgm.Po ./$(DEPDIR)/lexer.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/list.Po ./$(DEPDIR)/loop.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/magic.Po ./$(DEPDIR)/main.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/matrix-data.Po ./$(DEPDIR)/matrix.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/means.Po ./$(DEPDIR)/mis-val.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/misc.Po ./$(DEPDIR)/modify-vars.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/numeric.Po ./$(DEPDIR)/output.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/pfm-read.Po ./$(DEPDIR)/pfm-write.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/pool.Po ./$(DEPDIR)/postscript.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/print.Po ./$(DEPDIR)/q2c.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/random.Po ./$(DEPDIR)/recode.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/rename-vars.Po ./$(DEPDIR)/repeat.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/sample.Po ./$(DEPDIR)/sel-if.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/set.Po ./$(DEPDIR)/sfm-read.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/sfm-write.Po ./$(DEPDIR)/som.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/sort.Po ./$(DEPDIR)/split-file.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/stats.Po ./$(DEPDIR)/str.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/sysfile-info.Po ./$(DEPDIR)/t-test.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/tab.Po ./$(DEPDIR)/temporary.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/title.Po ./$(DEPDIR)/val-labs.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/var-labs.Po ./$(DEPDIR)/vars-atr.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/vars-prs.Po ./$(DEPDIR)/vector.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/version.Po ./$(DEPDIR)/vfm.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/weight.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(pspp_SOURCES) $(q2c_SOURCES)
+DIST_COMMON = $(srcdir)/Makefile.in ChangeLog Makefile.am
+SOURCES = $(pspp_SOURCES) $(q2c_SOURCES)
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+all: all-am
-TAR = tar
-GZIP_ENV = --best
-SOURCES = $(pspp_SOURCES)
-OBJECTS = $(pspp_OBJECTS)
-
-all: all-redirect
.SUFFIXES:
-.SUFFIXES: .S .c .o .q .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-
-mostlyclean-binPROGRAMS:
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-
-distclean-binPROGRAMS:
-
-maintainer-clean-binPROGRAMS:
-
+.SUFFIXES: .q .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu src/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
- if test -f $$p; then \
- echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
- $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
+ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
- list='$(bin_PROGRAMS)'; for p in $$list; do \
- rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+ rm -f $(DESTDIR)$(bindir)/$$f; \
done
-.c.o:
- $(COMPILE) -c $<
-
-.s.o:
- $(COMPILE) -c $<
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-.S.o:
- $(COMPILE) -c $<
+clean-noinstPROGRAMS:
+ -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
+pspp$(EXEEXT): $(pspp_OBJECTS) $(pspp_DEPENDENCIES)
+ @rm -f pspp$(EXEEXT)
+ $(LINK) $(pspp_LDFLAGS) $(pspp_OBJECTS) $(pspp_LDADD) $(LIBS)
+q2c$(EXEEXT): $(q2c_OBJECTS) $(q2c_DEPENDENCIES)
+ @rm -f q2c$(EXEEXT)
+ $(LINK) $(q2c_LDFLAGS) $(q2c_OBJECTS) $(q2c_LDADD) $(LIBS)
mostlyclean-compile:
- -rm -f *.o core *.core
-
-clean-compile:
+ -rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
-maintainer-clean-compile:
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aggregate.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/apply-dict.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ascii.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/autorecode.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/avl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cases.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cmdline.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/command.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compute.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/correlations.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/count.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crosstabs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/data-in.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/data-list.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/data-out.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/descript.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dfm.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/do-if.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expr-evl.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expr-opt.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expr-prs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file-handle.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file-type.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filename.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flip.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/format.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/formats.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/frequencies.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/get.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getline.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/glob.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/groff-font.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/heap.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/html.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/include.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/inpt-pgm.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lexer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/list.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loop.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/magic.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/matrix-data.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/matrix.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/means.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mis-val.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/modify-vars.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/numeric.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/output.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pfm-read.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pfm-write.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pool.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/postscript.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/print.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/q2c.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/random.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/recode.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rename-vars.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/repeat.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sample.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sel-if.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/set.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sfm-read.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sfm-write.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/som.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sort.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/split-file.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stats.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/str.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sysfile-info.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-test.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tab.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/temporary.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/title.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/val-labs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/var-labs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vars-atr.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vars-prs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vector.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vfm.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/weight.Po@am__quote@
-pspp: $(pspp_OBJECTS) $(pspp_DEPENDENCIES)
- @rm -f pspp
- $(LINK) $(pspp_LDFLAGS) $(pspp_OBJECTS) $(pspp_LDADD) $(LIBS)
+.c.o:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
-mostlyclean-tags:
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
-clean-tags:
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-
-subdir = src
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
-aggregate.o: aggregate.c ../config.h ../pref.h alloc.h approx.h \
- command.h error.h file-handle.h lexer.h misc.h settings.h sfm.h \
- sort.h stats.h str.h var.h format.h format.def vfm.h cases.h \
- vfmP.h debug-print.h
-alloc.o: alloc.c ../config.h ../pref.h str.h
-apply-dict.o: apply-dict.c ../config.h ../pref.h avl.h command.h error.h \
- file-handle.h lexer.h sfm.h str.h var.h format.h format.def \
- debug-print.h
-ascii.o: ascii.c ../config.h ../pref.h alloc.h error.h filename.h main.h \
- misc.h output.h str.h pool.h version.h
-autorecode.o: autorecode.c ../config.h ../pref.h alloc.h command.h \
- error.h hash.h lexer.h pool.h str.h var.h format.h format.def \
- vfm.h cases.h debug-print.h
-avl.o: avl.c ../config.h ../pref.h pool.h avl.h
-cases.o: cases.c ../config.h ../pref.h alloc.h cases.h var.h format.h \
- format.def vfm.h debug-print.h
-cmdline.o: cmdline.c ../config.h ../pref.h alloc.h error.h filename.h \
- getline.h main.h output.h str.h settings.h var.h format.h \
- format.def version.h
-command.o: command.c ../config.h ../pref.h alloc.h command.h error.h \
- getline.h lexer.h main.h settings.h som.h str.h tab.h var.h \
- format.h format.def vfm.h cases.h debug-print.h command.def
-compute.o: compute.c ../config.h ../pref.h alloc.h approx.h cases.h \
- command.h error.h expr.h lexer.h str.h var.h format.h \
- format.def vector.h debug-print.h
-correlations.o: correlations.c ../config.h ../pref.h alloc.h \
- file-handle.h error.h command.h lexer.h var.h format.h \
- format.def str.h debug-print.h
-count.o: count.c ../config.h ../pref.h alloc.h approx.h command.h \
- error.h lexer.h str.h var.h format.h format.def debug-print.h
-crosstabs.o: crosstabs.c ../config.h ../pref.h alloc.h avl.h hash.h \
- pool.h ../lib/dcdflib/cdflib.h command.h lexer.h error.h \
- magic.h misc.h stats.h output.h str.h tab.h var.h format.h \
- format.def vfm.h cases.h debug-print.h
-data-in.o: data-in.c ../config.h ../pref.h data-in.h format.h format.def \
- error.h getline.h ../lib/julcal/julcal.h lexer.h magic.h misc.h \
- settings.h str.h var.h debug-print.h
-data-list.o: data-list.c ../config.h ../pref.h alloc.h command.h \
- data-in.h format.h format.def debug-print.h dfm.h error.h \
- file-handle.h lexer.h misc.h settings.h str.h tab.h var.h vfm.h \
- cases.h
-data-out.o: data-out.c ../config.h ../pref.h approx.h error.h format.h \
- format.def ../lib/julcal/julcal.h magic.h misc.h settings.h \
- str.h var.h debug-print.h
-descript.o: descript.c ../config.h ../pref.h alloc.h bitvector.h \
- command.h lexer.h error.h approx.h magic.h stats.h som.h tab.h \
- str.h var.h format.h format.def vfm.h cases.h
-dfm.o: dfm.c ../config.h ../pref.h alloc.h command.h error.h \
- file-handle.h filename.h getline.h lexer.h misc.h str.h vfm.h \
- cases.h debug-print.h
-do-if.o: do-if.c ../config.h ../pref.h alloc.h command.h error.h expr.h \
- lexer.h str.h var.h format.h format.def debug-print.h do-ifP.h
-error.o: error.c ../config.h ../pref.h alloc.h command.h error.h \
- getline.h main.h output.h str.h settings.h var.h format.h \
- format.def
-expr-evl.o: expr-evl.c ../config.h ../pref.h approx.h data-in.h format.h \
- format.def error.h expr.h exprP.h debug-print.h \
- ../lib/julcal/julcal.h magic.h random.h stats.h str.h var.h \
- vector.h vfm.h cases.h vfmP.h
-expr-opt.o: expr-opt.c ../config.h ../pref.h alloc.h approx.h data-in.h \
- format.h format.def error.h expr.h exprP.h debug-print.h \
- ../lib/julcal/julcal.h misc.h stats.h str.h var.h
-expr-prs.o: expr-prs.c ../config.h ../pref.h alloc.h error.h expr.h \
- exprP.h debug-print.h lexer.h misc.h str.h var.h format.h \
- format.def vector.h vfm.h cases.h
-file-handle.o: file-handle.c ../config.h ../pref.h alloc.h avl.h \
- filename.h file-handle.h error.h command.h lexer.h getline.h \
- magic.h var.h format.h format.def str.h debug-print.h
-file-type.o: file-type.c ../config.h ../pref.h alloc.h approx.h \
- command.h data-in.h format.h format.def dfm.h file-handle.h \
- error.h lexer.h str.h var.h vfm.h cases.h
-filename.o: filename.c ../config.h ../pref.h alloc.h error.h filename.h \
- settings.h str.h version.h debug-print.h stat.h
-flip.o: flip.c ../config.h ../pref.h alloc.h command.h error.h lexer.h \
- misc.h str.h var.h format.h format.def vfm.h cases.h
-format.o: format.c ../config.h ../pref.h error.h format.h format.def \
- lexer.h misc.h str.h
-formats.o: formats.c ../config.h ../pref.h command.h error.h lexer.h \
- misc.h str.h var.h format.h format.def debug-print.h
-frequencies.o: frequencies.c ../config.h ../pref.h alloc.h avl.h \
- bitvector.h hash.h pool.h command.h lexer.h error.h approx.h \
- magic.h misc.h stats.h output.h str.h som.h tab.h var.h \
- format.h format.def vfm.h cases.h debug-print.h frequencies.g
-get.o: get.c ../config.h ../pref.h alloc.h avl.h command.h error.h \
- file-handle.h lexer.h misc.h pfm.h settings.h sfm.h str.h var.h \
- format.h format.def vfm.h cases.h vfmP.h debug-print.h
-getline.o: getline.c ../config.h ../pref.h alloc.h error.h filename.h \
- getline.h lexer.h settings.h str.h tab.h var.h format.h \
- format.def version.h
-glob.o: glob.c ../config.h ../pref.h alloc.h avl.h command.h do-ifP.h \
- var.h format.h format.def error.h expr.h filename.h getline.h \
- ../lib/julcal/julcal.h lexer.h main.h settings.h str.h \
- version.h vfm.h cases.h
-groff-font.o: groff-font.c ../config.h ../pref.h alloc.h error.h \
- filename.h font.h hash.h pool.h str.h version.h
-hash.o: hash.c ../config.h ../pref.h alloc.h hash.h
-heap.o: heap.c ../config.h ../pref.h heap.h
-html.o: html.c ../config.h ../pref.h alloc.h error.h filename.h \
- getline.h htmlP.h output.h str.h som.h tab.h version.h
-include.o: include.c ../config.h ../pref.h alloc.h command.h error.h \
- getline.h lexer.h str.h
-inpt-pgm.o: inpt-pgm.c ../config.h ../pref.h alloc.h command.h dfm.h \
- error.h expr.h file-handle.h inpt-pgm.h lexer.h misc.h str.h \
- var.h format.h format.def vfm.h cases.h debug-print.h
-lexer.o: lexer.c ../config.h ../pref.h alloc.h command.h error.h \
- getline.h lexer.h magic.h settings.h str.h
-list.o: list.c ../config.h ../pref.h alloc.h command.h lexer.h error.h \
- magic.h misc.h htmlP.h filename.h output.h str.h som.h var.h \
- format.h format.def vfm.h cases.h debug-print.h
-loop.o: loop.c ../config.h ../pref.h alloc.h approx.h command.h do-ifP.h \
- var.h format.h format.def error.h expr.h lexer.h settings.h \
- str.h debug-print.h
-magic.o: magic.c ../config.h ../pref.h magic.h
-main.o: main.c ../config.h ../pref.h command.h error.h getline.h lexer.h \
- output.h str.h debug-print.h
-matrix-data.o: matrix-data.c ../config.h ../pref.h alloc.h command.h \
- data-in.h format.h format.def dfm.h error.h file-handle.h \
- lexer.h misc.h pool.h str.h var.h vfm.h cases.h debug-print.h
-matrix.o: matrix.c ../config.h ../pref.h alloc.h matrix.h settings.h
-means.o: means.c ../config.h ../pref.h alloc.h avl.h command.h lexer.h \
- error.h magic.h var.h format.h format.def str.h debug-print.h
-mis-val.o: mis-val.c ../config.h ../pref.h command.h error.h lexer.h \
- magic.h str.h var.h format.h format.def debug-print.h
-misc.o: misc.c ../config.h ../pref.h misc.h
-modify-vars.o: modify-vars.c ../config.h ../pref.h alloc.h avl.h \
- bitvector.h command.h error.h lexer.h misc.h str.h var.h \
- format.h format.def vfm.h cases.h
-numeric.o: numeric.c ../config.h ../pref.h cases.h command.h error.h \
- lexer.h str.h var.h format.h format.def debug-print.h
-output.o: output.c ../config.h ../pref.h alloc.h approx.h error.h \
- filename.h lexer.h misc.h output.h str.h settings.h
-pfm-read.o: pfm-read.c ../config.h ../pref.h alloc.h avl.h file-handle.h \
- error.h format.h format.def getline.h magic.h misc.h pfm.h \
- str.h var.h debug-print.h
-pfm-write.o: pfm-write.c ../config.h ../pref.h alloc.h avl.h error.h \
- file-handle.h ../lib/gmp/gmp.h magic.h pfm.h str.h var.h \
- format.h format.def version.h debug-print.h
-pool.o: pool.c ../config.h ../pref.h alloc.h pool.h
-postscript.o: postscript.c ../config.h ../pref.h alloc.h bitvector.h \
- error.h filename.h font.h getline.h hash.h main.h misc.h \
- output.h str.h version.h
-print.o: print.c ../config.h ../pref.h alloc.h command.h dfm.h error.h \
- expr.h file-handle.h lexer.h misc.h som.h tab.h str.h var.h \
- format.h format.def debug-print.h
-random.o: random.c ../config.h ../pref.h magic.h random.h settings.h
-recode.o: recode.c ../config.h ../pref.h alloc.h approx.h cases.h \
- command.h error.h lexer.h magic.h str.h var.h format.h \
- format.def debug-print.h
-rename-vars.o: rename-vars.c ../config.h ../pref.h alloc.h avl.h \
- command.h error.h lexer.h str.h var.h format.h format.def
-repeat.o: repeat.c ../config.h ../pref.h alloc.h cases.h command.h \
- error.h getline.h lexer.h misc.h settings.h str.h var.h \
- format.h format.def debug-print.h
-sample.o: sample.c ../config.h ../pref.h alloc.h command.h error.h \
- lexer.h random.h str.h var.h format.h format.def debug-print.h
-sel-if.o: sel-if.c ../config.h ../pref.h alloc.h command.h error.h \
- expr.h lexer.h str.h var.h format.h format.def
-set.o: set.c ../config.h ../pref.h alloc.h command.h lexer.h error.h \
- magic.h log.h output.h str.h var.h format.h format.def \
- settings.h
-sfm-read.o: sfm-read.c ../config.h ../pref.h alloc.h avl.h error.h \
- file-handle.h format.h format.def getline.h magic.h misc.h \
- sfm.h sfmP.h str.h var.h debug-print.h
-sfm-write.o: sfm-write.c ../config.h ../pref.h alloc.h approx.h avl.h \
- error.h file-handle.h getline.h magic.h misc.h sfm.h sfmP.h \
- str.h var.h format.h format.def version.h debug-print.h
-som.o: som.c ../config.h ../pref.h output.h str.h som.h debug-print.h
-sort.o: sort.c ../config.h ../pref.h alloc.h approx.h command.h error.h \
- expr.h heap.h lexer.h misc.h sort.h str.h var.h format.h \
- format.def vfm.h cases.h vfmP.h debug-print.h
-split-file.o: split-file.c ../config.h ../pref.h alloc.h command.h \
- error.h lexer.h str.h var.h format.h format.def
-stats.o: stats.c ../config.h ../pref.h stats.h
-str.o: str.c ../config.h ../pref.h alloc.h error.h pool.h str.h
-sysfile-info.o: sysfile-info.c ../config.h ../pref.h alloc.h avl.h \
- command.h error.h file-handle.h lexer.h misc.h output.h str.h \
- sfm.h som.h tab.h var.h format.h format.def vector.h
-t-test.o: t-test.c ../config.h ../pref.h alloc.h str.h \
- ../lib/dcdflib/cdflib.h command.h lexer.h error.h magic.h var.h \
- format.h format.def vfm.h cases.h debug-print.h
-tab.o: tab.c ../config.h ../pref.h alloc.h command.h format.h format.def \
- magic.h misc.h output.h str.h pool.h som.h tab.h var.h \
- debug-print.h
-temporary.o: temporary.c ../config.h ../pref.h alloc.h avl.h command.h \
- do-ifP.h var.h format.h format.def error.h lexer.h str.h \
- debug-print.h
-title.o: title.c ../config.h ../pref.h alloc.h command.h error.h lexer.h \
- main.h output.h str.h var.h format.h format.def version.h vfm.h \
- cases.h debug-print.h
-val-labs.o: val-labs.c ../config.h ../pref.h alloc.h avl.h command.h \
- error.h lexer.h str.h var.h format.h format.def debug-print.h
-var-labs.o: var-labs.c ../config.h ../pref.h alloc.h command.h error.h \
- lexer.h str.h var.h format.h format.def debug-print.h
-vars-atr.o: vars-atr.c ../config.h ../pref.h alloc.h approx.h avl.h \
- command.h do-ifP.h var.h format.h format.def expr.h \
- file-handle.h error.h inpt-pgm.h misc.h str.h vector.h vfm.h \
- cases.h debug-print.h
-vars-prs.o: vars-prs.c ../config.h ../pref.h alloc.h avl.h bitvector.h \
- error.h lexer.h misc.h str.h var.h format.h format.def
-vector.o: vector.c ../config.h ../pref.h alloc.h cases.h command.h \
- error.h lexer.h misc.h str.h var.h format.h format.def vector.h
-version.o: version.c ../config.h ../pref.h
-vfm.o: vfm.c ../config.h ../pref.h alloc.h approx.h do-ifP.h var.h \
- format.h format.def error.h expr.h misc.h random.h som.h str.h \
- tab.h vector.h vfm.h cases.h vfmP.h debug-print.h
-weight.o: weight.c ../config.h ../pref.h command.h error.h lexer.h str.h \
- var.h format.h format.def
-
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
check-am: all-am
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am: install-binPROGRAMS
-install-exec: install-exec-am
+all-am: Makefile $(PROGRAMS)
-install-data-am:
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
+install: install-am
+install-exec: install-exec-am
install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am: uninstall-binPROGRAMS
-uninstall: uninstall-am
-all-am: Makefile $(PROGRAMS)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(bindir)
-
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
- mostlyclean-tags mostlyclean-generic
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-binPROGRAMS clean-generic clean-noinstPROGRAMS \
+ mostlyclean-am
-clean-am: clean-binPROGRAMS clean-compile clean-tags clean-generic \
- mostlyclean-am
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
-clean: clean-am
+dvi: dvi-am
-distclean-am: distclean-binPROGRAMS distclean-compile distclean-tags \
- distclean-generic clean-am
+dvi-am:
-distclean: distclean-am
+info: info-am
-maintainer-clean-am: maintainer-clean-binPROGRAMS \
- maintainer-clean-compile maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
-.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
-maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
-check-am installcheck-am installcheck install-exec-am install-exec \
-install-data-am install-data install-am install uninstall-am uninstall \
-all-redirect all-am all installdirs mostlyclean-generic \
-distclean-generic clean-generic maintainer-clean-generic clean \
-mostlyclean distclean maintainer-clean
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic clean-noinstPROGRAMS ctags distclean \
+ distclean-compile distclean-generic distclean-tags distdir dvi \
+ dvi-am info info-am install install-am install-binPROGRAMS \
+ install-data install-data-am install-exec install-exec-am \
+ install-info install-info-am install-man install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-binPROGRAMS uninstall-info-am
$(q_sources_c): q2c
echo " \"/usr/local/share/groff/font:\" \\" >> version.c
echo " \"/usr/share/groff/font\";" >> version.c
echo "const char locale_dir[] = \"$(datadir)/locale\";" >> version.c
-\f
-
-q2c.o: q2c.c
- $(LOCAL_COMPILE) $< -o q2c.o
-q2c: q2c.o
- $(LOCAL_LINK) q2c.o ../lib/misc/libmisc.a -o q2c
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
/* We want the data to be in big-endian format. If this is a
little-endian machine, reverse the byte order. */
- if (endian == LITTLE)
- {
- memcpy (buf, i->s, i->e - i->s);
- mm_reverse (buf, i->e - i->s);
- p = buf;
- }
- else
- p = i->s;
+#ifdef WORDS_BIGENDIAN
+ p = i->s;
+#else
+ memcpy (buf, i->s, i->e - i->s);
+ mm_reverse (buf, i->e - i->s);
+ p = buf;
+#endif
/* If the value is negative, we need to logical-NOT each value
before adding it. */
int j;
i->v->f = 0.0;
- if (endian == BIG)
- for (j = 0; j < i->e - i->s; j++)
- i->v->f = i->v->f * 256.0 + i->s[j];
- else
- for (j = i->e - i->s - 1; j >= 0; j--)
- i->v->f = i->v->f * 256.0 + i->s[j];
+#if WORDS_BIGENDIAN
+ for (j = 0; j < i->e - i->s; j++)
+ i->v->f = i->v->f * 256.0 + i->s[j];
+#else
+ for (j = i->e - i->s - 1; j >= 0; j--)
+ i->v->f = i->v->f * 256.0 + i->s[j];
+#endif
if (i->format.d)
i->v->f /= pow (10.0, i->format.d);
}
}
memcpy (dst, temp, fp->w);
- if (endian == LITTLE)
- mm_reverse (dst, fp->w);
+#ifndef WORDS_BIGENDIAN
+ mm_reverse (dst, fp->w);
+#endif
return 1;
}
frac *= 256.0;
((unsigned char *) dst)[i] = floor (frac);
}
- if (endian == LITTLE)
- mm_reverse (dst, fp->w);
+#ifndef WORDS_BIGENDIAN
+ mm_reverse (dst, fp->w);
+#endif
return 1;
}
sp->f *= 60. * 60. * 24.;
break;
case OP_DATE_MOYR:
- (--sp)->f = yrmoda (sp[1].f, sp[0].f, 1);
+ sp--;
+ sp->f = yrmoda (sp[1].f, sp[0].f, 1);
if (sp->f != SYSMIS)
sp->f *= 60. * 60. * 24.;
break;
int_pool = pool_create ();
result = internal_cmd_frequencies ();
pool_destroy (int_pool);
- int_pool=0;
pool_destroy (gen_pool);
- gen_pool=0;
free (v_variables);
- v_variables=0;
return result;
}
#include "getline.h"
#include "julcal/julcal.h"
#include "lexer.h"
+#include "magic.h"
#include "main.h"
#include "settings.h"
#include "str.h"
_control87 (0xffff, 0x137f);
#endif
-#if ENDIAN==UNKNOWN
- {
- /* Test for endianness borrowed from acspecific.m4, which was in
- turn borrowed from Harbison&Steele. */
- union
- {
- long l;
- char c[sizeof (long)];
- }
- u;
-
- u.l = 1;
- if (u.c[sizeof u.l - 1] == 1)
- endian = BIG;
- else if (u.c[0] == 1)
- endian = LITTLE;
- else
- msg (FE, _("Your machine does not appear to be either big- or little-"
- "endian. At the moment, PSPP only supports machines of "
- "these standard endiannesses. If you want to hack in "
- "others, contact the author."));
- }
-#endif
-
- /* PORTME: Set the value for second_lowest_value, which is the
- "second lowest" possible value for a double. This is the value
- for LOWEST on MISSING VALUES, etc. */
-#ifndef SECOND_LOWEST_VALUE
-#if FPREP == FPREP_IEEE754
- {
- union
- {
- unsigned char c[8];
- double d;
- }
- second_lowest_little = {{0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xef, 0xff}},
- second_lowest_big = {{0xff, 0xef, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe}};
-
- if (endian == LITTLE)
- second_lowest_value = second_lowest_little.d;
- else if (endian == BIG)
- second_lowest_value = second_lowest_big.d;
- }
-#else /* FPREP != FPREP_IEEE754 */
-#error Unknown floating-point representation.
-#endif /* FPREP != FPREP_IEEE754 */
-#endif /* !SECOND_LOWEST_VALUE */
-
/* var.h */
default_dict.var_by_name = avl_create (NULL, cmp_variable, NULL);
#include <stdlib.h>
#include "alloc.h"
#include "hash.h"
+#include "str.h"
/* Note for constructing hash functions:
int endian;
#endif
-#ifndef SECOND_LOWEST_VALUE
-/* "Second lowest" value for a flt64; that is, (-FLT64_MAX) + epsilon. */
-double second_lowest_value;
+/* magic.h */
+#ifndef __GNUC__
+union cvt_dbl second_lowest_value_union = {SECOND_LOWEST_BYTES};
#endif
-
#include <float.h>
#include <limits.h>
-#if ENDIAN != UNKNOWN
-#define endian ENDIAN
-#else
-extern int endian;
+/* Check that the floating-point representation is one that we
+ understand. */
+#ifndef FPREP_IEEE754
+#error Only IEEE-754 floating point currently supported.
#endif
-#ifdef SECOND_LOWEST_VALUE
-#define second_lowest_value SECOND_LOWEST_VALUE
+/* Allows us to specify individual bytes of a double. */
+union cvt_dbl {
+ unsigned char cvt_dbl_i[8];
+ double cvt_dbl_d;
+};
+
+
+/* "Second-lowest value" bytes for an IEEE-754 double. */
+#if WORDS_BIGENDIAN
+#define SECOND_LOWEST_BYTES {0xff,0xef,0xff,0xff, 0xff,0xff,0xff,0xfe}
#else
-extern double second_lowest_value;
+#define SECOND_LOWEST_BYTES {0xfe,0xff,0xff,0xff, 0xff,0xff,0xef,0xff}
+#endif
+
+/* "Second-lowest value" for a double. */
+#if __GNUC__
+#define second_lowest_value \
+ (__extension__ ((union cvt_dbl) {SECOND_LOWEST_BYTES}).cvt_dbl_d)
+#else /* not GNU C */
+extern union cvt_dbl second_lowest_value_union;
+#define second_lowest_value (second_lowest_value_union.cvt_dbl_d)
#endif
/* Used when we want a "missing value". */
where.line_number = 0;
err_push_file_locator (&where);
- ds_init (NULL, &line, 128);
-
if (init_fn == NULL)
{
msg (IE, _("Cannot find output initialization file. Use `-vv' to view "
goto exit;
}
+ ds_init (NULL, &line, 128);
for (;;)
{
char *cp;
#include "avl.h"
#include "error.h"
#include "file-handle.h"
-#include "gmp/gmp.h"
+#include "gmp.h"
#include "magic.h"
#include "pfm.h"
#include "str.h"
#include <stdlib.h>
#include "alloc.h"
#include "pool.h"
+#include "str.h"
/* Fast, low-overhead memory block suballocator. */
struct pool
\f
/* Utility functions. */
-#if !(__GNUC__ >= 2)
-#define nullstr ""
-#else
-const char nullstr[] = "";
-#endif
+char nullstr[] = "";
/* Close all open files and delete the output file, on failure. */
void
dump (0, "long n_%s;", st_lower (sbc->name));
break;
- default:
+ default:;
/* nothing */
}
}
#include "avl.h"
#include "error.h"
#include "file-handle.h"
+#include "filename.h"
#include "format.h"
#include "getline.h"
#include "magic.h"
/* bswap_int32(): Reverse the byte order of 32-bit integer *X. */
#if __linux__
#include <asm/byteorder.h>
+#include <netinet/in.h>
static inline void
bswap_int32 (int32 * x)
{
ext->opened--;
assert (ext->opened == 0);
- if (EOF == fclose (ext->file))
+ if (EOF == fn_close (h->fn, ext->file))
msg (ME, _("%s: Closing system file: %s."), h->fn, strerror (errno));
free (ext->buf);
free (h->ext);
/* Open the physical disk file. */
ext = xmalloc (sizeof (struct sfm_fhuser_ext));
- ext->file = fopen (h->norm_fn, "rb");
+ ext->file = fn_open (h->norm_fn, "rb");
if (ext->file == NULL)
{
msg (ME, _("An error occurred while opening \"%s\" for reading "
msg (VM (1), _("Error reading system-file header."));
free (var_by_index);
- fclose (ext->file);
+ fn_close (h->fn, ext->file);
if (ext && ext->dict)
free_dictionary (ext->dict);
free (ext);
struct sfm_fhuser_ext *ext = h->ext;
int32 data[8];
- int file_endian;
+ int file_bigendian;
int i;
bswap_int32 (&data[i]);
/* PORTME: Check floating-point representation. */
- switch (FPREP)
- {
- case FPREP_IEEE754:
- if (data[4] != 1)
- lose ((ME, _("%s: Floating-point representation in system file is not "
- "IEEE-754. PSPP cannot convert between floating-point "
- "formats."), h->fn));
- break;
- default:
- assert (0);
- }
+#ifdef FPREP_IEEE754
+ if (data[4] != 1)
+ lose ((ME, _("%s: Floating-point representation in system file is not "
+ "IEEE-754. PSPP cannot convert between floating-point "
+ "formats."), h->fn));
+#endif
/* PORTME: Check recorded file endianness against intuited file
endianness. */
- file_endian = endian;
+#ifdef WORDS_BIGENDIAN
+ file_bigendian = 1;
+#else
+ file_bigendian = 0;
+#endif
if (ext->reverse_endian)
- {
- if (file_endian == BIG)
- file_endian = LITTLE;
- else if (file_endian == LITTLE)
- file_endian = BIG;
- else
- assert (0);
- }
- if ((file_endian == BIG) ^ (data[6] == 1))
+ file_bigendian ^= 1;
+ if (file_bigendian ^ (data[6] == 1))
lose ((ME, _("%s: File-indicated endianness (%s) does not match endianness "
"intuited from file header (%s)."),
- h->fn, file_endian == BIG ? _("big-endian") : _("little-endian"),
+ h->fn, file_bigendian ? _("big-endian") : _("little-endian"),
data[6] == 1 ? _("big-endian") : (data[6] == 2 ? _("little-endian")
: _("unknown"))));
memcpy (inf->creation_time, hdr.creation_time, 8);
inf->creation_time[8] = 0;
- if (!ext->reverse_endian)
- inf->endianness = endian;
- else
- inf->endianness = endian == BIG ? LITTLE : BIG;
+#ifdef WORDS_BIGENDIAN
+ inf->bigendian = !ext->reverse_endian;
+#else
+ inf->bigendian = ext->reverse_endian;
+#endif
inf->compressed = hdr.compressed;
rec_7.elem_3[3] = -1;
/* PORTME: 1=IEEE754, 2=IBM 370, 3=DEC VAX E. */
-#if FPREP==FPREP_IEEE754
+#ifdef FPREP_IEEE754
rec_7.elem_3[4] = 1;
-#else
-#error Floating-point representation unknown here.
#endif
rec_7.elem_3[5] = 1;
/* PORTME: 1=big-endian, 2=little-endian. */
- if (endian == BIG)
- rec_7.elem_3[6] = 1;
- else if (endian == LITTLE)
- rec_7.elem_3[6] = 2;
- else
- rec_7.elem_3[6] = 0;
+#if WORDS_BIGENDIAN
+ rec_7.elem_3[6] = 1;
+#else
+ rec_7.elem_3[6] = 2;
+#endif
/* PORTME: 1=EBCDIC, 2=7-bit ASCII, 3=8-bit ASCII, 4=DEC Kanji. */
rec_7.elem_3[7] = 2;
{
char creation_date[10]; /* `dd mmm yy' plus a null. */
char creation_time[9]; /* `hh:mm:ss' plus a null. */
- int endianness; /* BIG or LITTLE. */
+ int bigendian; /* 1=big-endian, 0=little-endian. */
int compressed; /* 0=no, 1=yes. */
int ncases; /* -1 if unknown. */
char product[61]; /* Product name plus a null. */
tab_text (t, 1, 2, TAB_LEFT | TAT_PRINTF, "%s %s by %s",
inf.creation_date, inf.creation_time, inf.product);
tab_text (t, 0, 3, TAB_LEFT, _("Endian:"));
- tab_text (t, 1, 3, TAB_LEFT,
- (inf.endianness == BIG ? _("Big.")
- : (inf.endianness == LITTLE ? _("Little.")
- : (assert (0), _("<internal error>")))));
+ tab_text (t, 1, 3, TAB_LEFT, inf.bigendian ? _("Big.") : _("Little."));
tab_text (t, 0, 4, TAB_LEFT, _("Variables:"));
tab_text (t, 1, 4, TAB_LEFT | TAT_PRINTF, "%d",
d->nvar);
bench:
make BENCHMARK=1 check
-TESTS = syntax bugs/double-frequency.sh
+TESTS = syntax
noinst_PROGRAMS = gengarbage
-# Makefile.in generated automatically by automake 1.4 from Makefile.am
+# Makefile.in generated by automake 1.7.9 from Makefile.am.
+# @configure_input@
-# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
+# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-
-SHELL = @SHELL@
+@SET_MAKE@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-bindir = @bindir@
-sbindir = @sbindir@
-libexecdir = @libexecdir@
-datadir = @datadir@
-sysconfdir = @sysconfdir@
-sharedstatedir = @sharedstatedir@
-localstatedir = @localstatedir@
-libdir = @libdir@
-infodir = @infodir@
-mandir = @mandir@
-includedir = @includedir@
-oldincludedir = /usr/include
-
-DESTDIR =
-
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-
top_builddir = ..
-ACLOCAL = @ACLOCAL@
-AUTOCONF = @AUTOCONF@
-AUTOMAKE = @AUTOMAKE@
-AUTOHEADER = @AUTOHEADER@
-
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-transform = @program_transform_name@
-
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_alias = @build_alias@
-build_triplet = @build@
-host_alias = @host_alias@
host_triplet = @host@
-target_alias = @target_alias@
-target_triplet = @target@
-CATALOGS = @CATALOGS@
+ACLOCAL = @ACLOCAL@
+ALLOCA = @ALLOCA@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
+CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
GENCAT = @GENCAT@
-GMOFILES = @GMOFILES@
-GMP_LIBS = @GMP_LIBS@
-GMP_SUBDIRS = @GMP_SUBDIRS@
+GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
-GT_NO = @GT_NO@
-GT_YES = @GT_YES@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
-INTLDEPS = @INTLDEPS@
+INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
+INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
LN_S = @LN_S@
-LOCAL_CC = @LOCAL_CC@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
-POFILES = @POFILES@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
-U = @U@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-l = @l@
+XGETTEXT = @XGETTEXT@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
-TESTS = syntax bugs/double-frequency.sh
+TESTS = syntax
noinst_PROGRAMS = gengarbage
noinst_DATA = sort.data
-EXTRA_DIST = aggregate.stat autorecod.stat beg-data.stat bignum.data bignum.stat compute.stat count.stat crosstabs.stat data-fmts.stat data-list.data data-list.stat descript.stat do-if.stat do-repeat.stat expr.stat file-lab.stat filter.stat flip.stat gengarbage.c inpt-pgm.stat lag.stat list.data list.stat loop.stat mtch-file.stat means.stat mdfy-vars.stat print.stat pcs-if.stat recode.stat repeating.stat reread.data reread.stat sample.stat sort.stat splt-file.stat sys-info.stat t-test.stat tabs.stat temporary.stat time-date.stat vector.stat weighting.data weighting.stat syntax
+EXTRA_DIST = aggregate.stat autorecod.stat beg-data.stat bignum.data \
+bignum.stat compute.stat count.stat crosstabs.stat data-fmts.stat \
+data-list.data data-list.stat descript.stat do-if.stat do-repeat.stat \
+expr.stat file-lab.stat filter.stat flip.stat gengarbage.c \
+inpt-pgm.stat lag.stat list.data list.stat loop.stat mtch-file.stat \
+means.stat mdfy-vars.stat print.stat pcs-if.stat recode.stat \
+repeating.stat reread.data reread.stat sample.stat sort.stat \
+splt-file.stat sys-info.stat t-test.stat tabs.stat temporary.stat \
+time-date.stat vector.stat weighting.data weighting.stat syntax
DISTCLEANFILES = *.save sort.data pspp.* foo* msgs *.actual
MAINTAINERCLEANFILES = Makefile.in
+subdir = tests
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = ../config.h
-CONFIG_CLEAN_FILES =
-PROGRAMS = $(noinst_PROGRAMS)
-
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+noinst_PROGRAMS = gengarbage$(EXEEXT)
+PROGRAMS = $(noinst_PROGRAMS)
-DEFS = @DEFS@ -I. -I$(srcdir) -I..
-CPPFLAGS = @CPPFLAGS@
-LDFLAGS = @LDFLAGS@
-LIBS = @LIBS@
gengarbage_SOURCES = gengarbage.c
-gengarbage_OBJECTS = gengarbage.o
+gengarbage_OBJECTS = gengarbage.$(OBJEXT)
gengarbage_LDADD = $(LDADD)
-gengarbage_DEPENDENCIES =
-gengarbage_LDFLAGS =
-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+gengarbage_DEPENDENCIES =
+gengarbage_LDFLAGS =
+
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/gengarbage.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
-DATA = $(noinst_DATA)
-
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-
-
-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = gengarbage.c
+DATA = $(noinst_DATA)
-TAR = tar
-GZIP_ENV = --best
+DIST_COMMON = $(srcdir)/Makefile.in ChangeLog Makefile.am
SOURCES = gengarbage.c
-OBJECTS = gengarbage.o
-
-all: all-redirect
-.SUFFIXES:
-.SUFFIXES: .S .c .o .s
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps tests/Makefile
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) \
- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+all: all-am
-mostlyclean-noinstPROGRAMS:
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu tests/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
clean-noinstPROGRAMS:
-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
-
-distclean-noinstPROGRAMS:
-
-maintainer-clean-noinstPROGRAMS:
-
-.c.o:
- $(COMPILE) -c $<
-
-.s.o:
- $(COMPILE) -c $<
-
-.S.o:
- $(COMPILE) -c $<
+gengarbage$(EXEEXT): $(gengarbage_OBJECTS) $(gengarbage_DEPENDENCIES)
+ @rm -f gengarbage$(EXEEXT)
+ $(LINK) $(gengarbage_LDFLAGS) $(gengarbage_OBJECTS) $(gengarbage_LDADD) $(LIBS)
mostlyclean-compile:
- -rm -f *.o core *.core
-
-clean-compile:
+ -rm -f *.$(OBJEXT) core *.core
distclean-compile:
-rm -f *.tab.c
-maintainer-clean-compile:
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gengarbage.Po@am__quote@
-gengarbage: $(gengarbage_OBJECTS) $(gengarbage_DEPENDENCIES)
- @rm -f gengarbage
- $(LINK) $(gengarbage_LDFLAGS) $(gengarbage_OBJECTS) $(gengarbage_LDADD) $(LIBS)
+.c.o:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
+@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \
+@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
+@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
+@am__fastdepCC_TRUE@ fi
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+CTAGS = ctags
+CTAGSFLAGS =
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP)
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- here=`pwd` && cd $(srcdir) \
- && mkid -f$$here/ID $$unique $(LISP)
+ mkid -fID $$unique
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS)'; \
- unique=`for i in $$list; do echo $$i; done | \
- awk ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
-mostlyclean-tags:
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
-clean-tags:
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
- -rm -f TAGS ID
-
-maintainer-clean-tags:
-
-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-subdir = tests
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -gt `echo "$$banner" | wc -c` && \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -gt `echo "$$banner" | wc -c` && \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -n "$$skipped" && echo "$$skipped"; \
+ test -n "$$report" && echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
distdir: $(DISTFILES)
- @for file in $(DISTFILES); do \
- d=$(srcdir); \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
if test -d $$d/$$file; then \
- cp -pr $$d/$$file $(distdir)/$$file; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
- || cp -p $$d/$$file $(distdir)/$$file || :; \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
fi; \
done
- $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
-gengarbage.o: gengarbage.c
-
-check-TESTS: $(TESTS)
- @failed=0; all=0; \
- srcdir=$(srcdir); export srcdir; \
- for tst in $(TESTS); do \
- if test -f $$tst; then dir=.; \
- else dir="$(srcdir)"; fi; \
- if $(TESTS_ENVIRONMENT) $$dir/$$tst; then \
- all=`expr $$all + 1`; \
- echo "PASS: $$tst"; \
- elif test $$? -ne 77; then \
- all=`expr $$all + 1`; \
- failed=`expr $$failed + 1`; \
- echo "FAIL: $$tst"; \
- fi; \
- done; \
- if test "$$failed" -eq 0; then \
- banner="All $$all tests passed"; \
- else \
- banner="$$failed of $$all tests failed"; \
- fi; \
- dashes=`echo "$$banner" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- echo "$$dashes"; \
- test "$$failed" -eq 0
-info-am:
-info: info-am
-dvi-am:
-dvi: dvi-am
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-am
-installcheck-am:
-installcheck: installcheck-am
-install-exec-am:
-install-exec: install-exec-am
+all-am: Makefile $(PROGRAMS) $(DATA)
-install-data-am:
+installdirs:
+install: install-am
+install-exec: install-exec-am
install-data: install-data-am
+uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
-uninstall-am:
-uninstall: uninstall-am
-all-am: Makefile $(PROGRAMS) $(DATA)
-all-redirect: all-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
-
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
- -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+ -rm -f $(CONFIG_CLEAN_FILES)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \
- mostlyclean-tags mostlyclean-generic
+clean: clean-am
-mostlyclean: mostlyclean-am
+clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am
-clean-am: clean-noinstPROGRAMS clean-compile clean-tags clean-generic \
- mostlyclean-am
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
-clean: clean-am
+dvi: dvi-am
-distclean-am: distclean-noinstPROGRAMS distclean-compile distclean-tags \
- distclean-generic clean-am
+dvi-am:
-distclean: distclean-am
+info: info-am
-maintainer-clean-am: maintainer-clean-noinstPROGRAMS \
- maintainer-clean-compile maintainer-clean-tags \
- maintainer-clean-generic distclean-am
- @echo "This command is intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
-.PHONY: mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
-clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
-mostlyclean-compile distclean-compile clean-compile \
-maintainer-clean-compile tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir check-TESTS info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
-install-exec install-data-am install-data install-am install \
-uninstall-am uninstall all-redirect all-am all installdirs \
-mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
+ clean-generic clean-noinstPROGRAMS ctags distclean \
+ distclean-compile distclean-generic distclean-tags distdir dvi \
+ dvi-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
+ uninstall-am uninstall-info-am
bench:
dist-hook:
cp -rp $(srcdir)/expect $(distdir)
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
projects / pspp-builds.git / commitdiff