First stab at Bochs 2.2.6 upgrade (not yet tested).
[pintos-anon] / src / misc / bochs-2.1.1.patch
diff --git a/src/misc/bochs-2.1.1.patch b/src/misc/bochs-2.1.1.patch
deleted file mode 100644 (file)
index 3d542f6..0000000
+++ /dev/null
@@ -1,271 +0,0 @@
-The first two patches are needed for Bochs to properly compile and run
-under Solaris on Sparc.  If you're not compiling on Solaris, don't
-apply them.  The first should probably be handled by Autoconf; I'm not
-sure why it isn't.  The second is needed to make GCC accept X.h's
-frequent use of "extern foo(...)", because use of an implicit int
-return type is forbidden in C++.
-
-The third patch makes the gdb stubs work on Solaris/Sparc, by doing
-proper byteswapping.  It should be harmless elsewhere.
-
-The fourth patch enables the serial device under Solaris and disables
-tty setup at the same time.  Tty setup is a pain when you want to
-connect a serial port to stdout and it doesn't work under Solaris
-anyway.  This patch is useful everywhere with `pintos', but may not be
-wanted elsewhere.
-
-The remaining patches add the `jitter' feature described in the
-project documentation, in which timer interrupts are delivered at
-random intervals.
-
-To apply all the patches, cd into the Bochs directory, then type
-       patch -p1 < $PINTOSROOT/src/misc/bochs-2.1.1.patch
-You will have to supply the proper path to the patch, of course.  You
-can provide the --dry-run option to patch if you want to test whether
-the patch would apply cleanly before actually patching.
-
-To apply a subset of the patches, use a text editor to delete the
-unwanted patches, then follow the above instructions.
-
-Here's a ./configure invocation for Bochs that works optimally with
-the `pintos' utility:
-       ./configure --with-x --with-x11 --with-term --with-nogui
-If you want the gdb stub, add --enable-gdb-stub
-If you want the internal debugger, add --enable-debugger
-
-Here are the commands used to build and install all the versions of
-Bochs we make available on the elaines:
-
-cd /tmp && tar xzf ~/bochs-2.1.1.tar.gz && cd bochs-2.1.1
-patch -p1 < $PINTOSROOT/src/misc/bochs-2.1.1.patch
-PREFIX="/usr/class/cs140/`uname -m`"
-CFGOPTS="--with-x --with-x11 --with-term --with-nogui --prefix=$PREFIX"
-(mkdir plain &&
- cd plain && 
- ../configure $CFGOPTS && 
- make && 
- make install)
-(mkdir with-gdb &&
- cd with-gdb &&
- ../configure --enable-gdb-stub $CFGOPTS &&
- make &&
- cp bochs $PREFIX/bin/bochs-gdb)
-(mkdir with-dbg &&
- cd with-dbg &&
- ../configure --enable-debugger $CFGOPTS &&
- make &&
- cp bochs $PREFIX/bin/bochs-dbg)
-
-diff -urp orig/bochs-2.1.1/Makefile.in bochs-2.1.1/Makefile.in
---- orig/bochs-2.1.1/Makefile.in       2004-02-11 14:28:02.000000000 -0800
-+++ bochs-2.1.1/Makefile.in    2004-09-13 15:05:26.281550000 -0700
-@@ -92,7 +92,7 @@ CXX = @CXX@
- CFLAGS = @CFLAGS@ @GUI_CFLAGS@ $(MCH_CFLAGS) $(FLA_FLAGS) @DEFINE_PLUGIN_PATH@ -DBX_SHARE_PATH='"$(sharedir)"'
- CXXFLAGS = @CXXFLAGS@ @GUI_CXXFLAGS@ $(MCH_CFLAGS) $(FLA_FLAGS) @DEFINE_PLUGIN_PATH@ -DBX_SHARE_PATH='"$(sharedir)"'
--LDFLAGS = @LDFLAGS@
-+LDFLAGS = @LDFLAGS@ -lsocket
- LIBS = @LIBS@
- # To compile with readline:
- #   linux needs just -lreadline
-
-diff -urp orig/bochs-2.1.1/gui/Makefile.in bochs-2.1.1/gui/Makefile.in
---- orig/bochs-2.1.1/gui/Makefile.in   2003-11-28 07:07:28.000000000 -0800
-+++ bochs-2.1.1/gui/Makefile.in        2004-09-13 15:05:09.402039000 -0700
-@@ -44,7 +44,7 @@ SHELL = /bin/sh
- @SET_MAKE@
- CXX = @CXX@
--CXXFLAGS = $(BX_INCDIRS) @CXXFLAGS@  @GUI_CXXFLAGS@
-+CXXFLAGS = $(BX_INCDIRS) @CXXFLAGS@  @GUI_CXXFLAGS@ -fms-extensions
- LOCAL_CXXFLAGS =
- LDFLAGS = @LDFLAGS@
- LIBS = @LIBS@
-
-
-diff -urp orig/bochs-2.1.1/gdbstub.cc bochs-2.1.1/gdbstub.cc
---- orig/bochs-2.1.1/gdbstub.cc        2004-02-11 14:28:41.000000000 -0800
-+++ bochs-2.1.1/gdbstub.cc     2004-09-13 16:41:59.652988000 -0700
-@@ -474,11 +475,13 @@ static void debug_loop(void)
-           case 'P':
-               {
-                  int reg;
--                 int value;
-+                 Bit8u vbits[4];
-+                 Bit32u value;
-                  char* ebuf;
-                  
-                  reg = strtoul(&buffer[1], &ebuf, 16);
--                 value = ntohl(strtoul(ebuf + 1, &ebuf, 16));
-+                 hex2mem(ebuf + 1, vbits, sizeof value);
-+                 ReadHostDWordFromLittleEndian(vbits, value);
-                  
-                  BX_INFO (("reg %d set to %x", reg, value));
-                  
-@@ -527,35 +530,36 @@ static void debug_loop(void)
-               }
-             
-           case 'g':
--            registers[0] = EAX;
--            registers[1] = ECX;
--            registers[2] = EDX;
--            registers[3] = EBX;
--            registers[4] = ESP;
--            registers[5] = EBP;
--            registers[6] = ESI;
--            registers[7] = EDI;
-+            WriteHostDWordToLittleEndian(registers + 0, EAX);
-+            WriteHostDWordToLittleEndian(registers + 1, ECX);
-+            WriteHostDWordToLittleEndian(registers + 2, EDX);
-+            WriteHostDWordToLittleEndian(registers + 3, EBX);
-+            WriteHostDWordToLittleEndian(registers + 4, ESP);
-+            WriteHostDWordToLittleEndian(registers + 5, EBP);
-+            WriteHostDWordToLittleEndian(registers + 6, ESI);
-+            WriteHostDWordToLittleEndian(registers + 7, EDI);
-             if (last_stop_reason == GDBSTUB_EXECUTION_BREAKPOINT)
-               {
--                 registers[8] = EIP + 1;
-+                WriteHostDWordToLittleEndian(registers + 8, EIP + 1);
-               }
-             else
-               {
--                 registers[8] = EIP;
-+                WriteHostDWordToLittleEndian(registers + 8, EIP);
-               }
--            registers[9] = BX_CPU_THIS_PTR read_eflags();
--            registers[10] = 
--              BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value;
--            registers[11] = 
--              BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.value;
--            registers[12] = 
--              BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.value;
--            registers[13] = 
--              BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.value;
--            registers[14] = 
--              BX_CPU_THIS_PTR sregs[BX_SEG_REG_FS].selector.value;
--            registers[15] = 
--              BX_CPU_THIS_PTR sregs[BX_SEG_REG_GS].selector.value;
-+            WriteHostDWordToLittleEndian(registers + 9,
-+                                         BX_CPU_THIS_PTR read_eflags());
-+            WriteHostDWordToLittleEndian(registers + 10,
-+              BX_CPU_THIS_PTR sregs[BX_SEG_REG_CS].selector.value);
-+            WriteHostDWordToLittleEndian(registers + 11,
-+              BX_CPU_THIS_PTR sregs[BX_SEG_REG_SS].selector.value);
-+            WriteHostDWordToLittleEndian(registers + 12,
-+              BX_CPU_THIS_PTR sregs[BX_SEG_REG_DS].selector.value);
-+            WriteHostDWordToLittleEndian(registers + 13,
-+              BX_CPU_THIS_PTR sregs[BX_SEG_REG_ES].selector.value);
-+            WriteHostDWordToLittleEndian(registers + 14,
-+              BX_CPU_THIS_PTR sregs[BX_SEG_REG_FS].selector.value);
-+            WriteHostDWordToLittleEndian(registers + 15,
-+              BX_CPU_THIS_PTR sregs[BX_SEG_REG_GS].selector.value);
-             mem2hex((char *)registers, obuf, NUMREGSBYTES);
-             put_reply(obuf);
-             break;
-
-diff -urp bochs-2.1.1-upstream/iodev/serial.cc bochs-2.1.1/iodev/serial.cc
---- tmp/bochs-2.1.1/iodev/serial.cc    2004-02-11 14:28:54.000000000 -0800
-+++ bochs-2.1.1/iodev/serial.cc        2005-06-01 20:26:01.000000000 -0700
-@@ -53,7 +53,7 @@
- #endif
- #endif
--#if defined(__NetBSD__) || defined(__FreeBSD__) || defined(__OpenBSD__) || defined(__linux__) || defined(__GNU__) || defined(__APPLE__)
-+#if defined(__NetBSD__) || defined(__FreeBSD__) || defined(__OpenBSD__) || defined(__linux__) || defined(__GNU__) || defined(__APPLE__) || defined(__sun__)
- #define SERIAL_ENABLE
- #endif
-@@ -118,10 +118,11 @@ bx_serial_c::init(void)
- #ifdef SERIAL_ENABLE
-   if (strlen(bx_options.com[0].Odev->getptr ()) > 0) {
--    tty_id = open(bx_options.com[0].Odev->getptr (), O_RDWR|O_NONBLOCK,600);
-+    tty_id = open(bx_options.com[0].Odev->getptr (), O_RDWR,600);
-     if (tty_id < 0)
-       BX_PANIC(("open of %s (%s) failed\n",
-                 "com1", bx_options.com[0].Odev->getptr ()));
-+#if 0
-     BX_DEBUG(("tty_id: %d",tty_id));
-     tcgetattr(tty_id, &term_orig);
-     bcopy((caddr_t) &term_orig, (caddr_t) &term_new, sizeof(struct termios));
-@@ -145,6 +148,7 @@ bx_serial_c::init(void)
-     term_new.c_cc[VTIME] = 0;
-     //term_new.c_iflag |= IXOFF;
-     tcsetattr(tty_id, TCSAFLUSH, &term_new);
-+#endif
-   }
- #endif   /* def SERIAL_ENABLE */
-   // nothing for now
-@@ -955,7 +968,7 @@ bx_serial_c::rx_timer(void)
-     }
-     if (rdy) {
-       chbuf = data;
--#elif defined(SERIAL_ENABLE)
-+#elif 0 && defined(SERIAL_ENABLE)
-     if ((tty_id >= 0) && (select(tty_id + 1, &fds, NULL, NULL, &tval) == 1)) {
-       (void) read(tty_id, &chbuf, 1);
-       BX_DEBUG(("read: '%c'",chbuf));
-
-diff -urp bochs-2.1.1.orig/bochs.h bochs-2.1.1/bochs.h
---- bochs-2.1.1.orig/bochs.h   2004-02-11 14:28:03.000000000 -0800
-+++ bochs-2.1.1/bochs.h        2004-09-20 17:02:01.000000000 -0700
-@@ -757,4 +757,6 @@ int bx_init_hardware ();
- #endif
-+extern int jitter;
-+
- #endif  /* BX_BOCHS_H */
-diff -urp bochs-2.1.1.orig/iodev/pit82c54.cc bochs-2.1.1/iodev/pit82c54.cc
---- bochs-2.1.1.orig/iodev/pit82c54.cc 2004-02-11 14:28:53.000000000 -0800
-+++ bochs-2.1.1/iodev/pit82c54.cc      2004-09-20 17:18:24.000000000 -0700
-@@ -28,6 +28,7 @@
- #include "bochs.h"
- #include "pit82c54.h"
-+#include <stdlib.h>
- #define LOG_THIS this->
-@@ -356,7 +357,13 @@ pit_82C54::clock(Bit8u cnum) {
-       case 2:
-       if(thisctr.count_written) {
-         if(thisctr.triggerGATE || thisctr.first_pass) {
--          set_count(thisctr, thisctr.inlatch);
-+            unsigned n = thisctr.inlatch;
-+            if (jitter) {
-+                n *= (double) rand() / RAND_MAX;
-+                if (n < 5)
-+                    n = 5;
-+            }
-+          set_count(thisctr, n);
-           thisctr.next_change_time=(thisctr.count_binary-1) & 0xFFFF;
-           thisctr.null_count=0;
-           if(thisctr.inlatch==1) {
-diff -urp bochs-2.1.1.orig/iodev/pit_wrap.cc bochs-2.1.1/iodev/pit_wrap.cc
-diff -urp bochs-2.1.1.orig/iodev/serial.cc bochs-2.1.1/iodev/serial.cc
-diff -urp bochs-2.1.1.orig/main.cc bochs-2.1.1/main.cc
---- bochs-2.1.1.orig/main.cc   2004-02-11 14:28:41.000000000 -0800
-+++ bochs-2.1.1/main.cc        2004-09-20 17:15:39.000000000 -0700
-@@ -58,6 +58,7 @@
- int bochsrc_include_count = 0;
-+int jitter = 0;
- extern "C" {
- #include <signal.h>
-@@ -2022,6 +2024,13 @@ bx_init_main (int argc, char *argv[])
-     else if (!strcmp ("-q", argv[arg])) {
-       SIM->get_param_enum(BXP_BOCHS_START)->set (BX_QUICK_START);
-     }
-+    else if (!strcmp ("-j", argv[arg])) {
-+      if (++arg >= argc) BX_PANIC(("-j must be followed by a number"));
-+      else {
-+        jitter = 1;
-+        srand (atoi (argv[arg]));
-+      }
-+    }
-     else if (!strcmp ("-f", argv[arg])) {
-       if (++arg >= argc) BX_PANIC(("-f must be followed by a filename"));
-       else bochsrc_filename = argv[arg];