+* Godmar: add _end to user.lds script and construct some tests that fail
+ unless students check a region for validity rather than just the first
+ address of a region. Right now, unfortunately, they pass all p2 tests
+ with just checking the first address. [A possible problem is that the
+ tests may be unable to tell termination due to unintentional fault
+ from willful termination when address check fails. Should we require
+ they return -1/EINVAL on a bad address and disallow termination? Or
+ construct a test that they'll likely fail if they unintentionally
+ terminate, maybe while holding the filesystem lock? Or require that
+ the diagnostic message only be output when fault occurs in user mode?
+ Something to think about.]
+
+* Threads project:
+
+ - Godmar:
+
+ >> Describe a potential race in thread_set_priority() and explain how
+ >> your implementation avoids it. Can you use a lock to avoid this race?
+
+ I'm not sure what you're getting at here:
+ If changing the priority of a thread involves accessing the ready
+ list, then of course there's a race with interrupt handlers and locks
+ can't be used to resolve it.
+
+ Changing the priority however also involves a race with respect to
+ accessing a thread's "priority" field - this race is with respect to
+ other threads that attempt to donate priority to the thread that's
+ changing its priority. Since this is a thread-to-thread race, I would
+ tend to believe that locks could be used, although I'm not certain. [
+ I should point out, though, that lock_acquire currently disables
+ interrupts - the purpose of which I had doubted in an earlier email,
+ since sema_down() sufficiently establishes mutual exclusion. Taking
+ priority donation into account, disabling interrupts prevents the race
+ for the priority field, assuming the priority field of each thread is
+ always updated with interrupts disabled. ]
+
+ What answer are you looking for for this design document question?
+
+ - Godmar: Another thing: one group passed all tests even though they
+ wake up all waiters on a lock_release(), rather than just
+ one. Since there's never more than one waiter in our tests, they
+ didn't fail anything. Another possible TODO item - this could be
+ part a series of "regression tests" that check that they didn't
+ break basic functionality in project 1. I don't think this would
+ be insulting to the students.
+
+* Userprog project:
+
+ - Get rid of rox--causes more trouble than it's worth
+
+ - Extra credit: specifics on how to implement sbrk, malloc.
+ Godmar: I have a sample solution and tests for that! Stay tuned.
+
+ - Godmar: We're missing tests that pass arguments to system calls
+ that span multiple pages, where some are mapped and some are not.
+ An implementation that only checks the first page, rather than all
+ pages that can be touched during a call to read()/write() passes
+ all tests.
+
+ - Godmar: There does not appear to be a test that checks that they
+ close all fd's on exit. Idea: add statistics & self-diagnostics
+ code to palloc.c and malloc.c. Self-diagnostics code could be
+ used for debugging. The statistics code would report how much
+ kernel memory is free. Add a system call
+ "get_kernel_memory_information". User programs could engage in a
+ variety of activities and notice leaks by checking the kernel
+ memory statistics.
+ - note: multi-oom tests that now.
+
+ - Godmar: In the wait() tests, there's currently no test that tests
+ that a process can only wait for its own children. There's only
+ one test that tests that wait() on an invalid pid returns -1 (or
+ kills the process), but no test where a valid pid is used that is
+ not a child of the current process.
+
+ The current tests also do not ensure that both scenarios (parent waits
+ first vs. child exits first) are exercised. In this context, I'm
+ wondering if we should add a sleep() system call that would export
+ timer_sleep() to user processes; this would allow the construction of
+ such a test. It would also make it easier to construct a test for the
+ valid-pid, but not-a-child scenario.
+
+ As in Project 4, the baseline implementation of timer_sleep() should
+ suffice, so this would not necessarily require basing Project 2 on
+ Project 1. [ A related thought: IMO it would not be entirely
+ unreasonable to require timer_sleep() and priority scheduling sans
+ donation from Project 1 working for subsequent projects. ]
+
+* VM project:
+
+ - Godmar: Get rid of mmap syscall, add sbrk.
+
+ - Godmar: page-linear, page-shuffle VM tests do not use enough
+ memory to force eviction. Should increase memory consumption.
+
+ - Godmar: fix the page* tests to require swapping
+
+ - Godmar: make sure the filesystem fails if not properly
+ concurrency-protected in project 3.
+
+ - Godmar: Another area in which tests could be created are for
+ project 3: tests that combine mmap with a paging workload to see
+ their kernel pages properly while mmapping pages - I don't think
+ the current tests test that, do they?
+
+* Filesys project:
+
+ - Need a better way to measure performance improvement of buffer
+ cache. Some students reported that their system was slower with
+ cache--likely, Bochs doesn't simulate a disk with a realistic
+ speed.
+
+ (Perhaps we should count disk reads and writes, not time.)
+
+ - Need lots more tests.
+
+ - Detect implementations that represent the cwd as a string, by
+ removing a directory that is the cwd of another process, then
+ creating a new directory of the same name and putting some files
+ in it, then checking whether the process that had it as cwd sees
+ them.
+
+ - dir-rm-cwd should have a related test that uses a separate process
+ to try to pin the directory as its cwd.
+
+ - Godmar: I'm not sure if I mentioned that already, but I passed all
+ tests for the filesys project without having implemented inode
+ deallocation. A test is needed that checks that blocks are
+ reclaimed when files are deleted.
+
+ - Godmar: I'm in the middle of project 4, I've started by
+ implementing a buffer cache and plugging it into the existing
+ filesystem. Along the way I was wondering how we could test the
+ cache.
+
+ Maybe one could adopt a similar testing strategy as in project 1
+ for the MLQFS scheduler: add a function that reads
+ "get_cache_accesses()" and a function "get_cache_hits()". Then
+ create a version of pintos that creates access traces for a
+ to-be-determined workload. Run an off-line analysis that would
+ determine how many hits a perfect cache would have (MAX), and how
+ much say an LRU strategy would give (MIN). Then add a fudge
+ factor to account for different index strategies and test that the
+ reported number of cache hits/accesses is within (MIN, MAX) +/-
+ fudge factor.
+
+ (As an aside - I am curious why you chose to use a clock-style
+ algorithm rather than the more straightforward LRU for your buffer
+ cache implementation in your sample solution. Is there a reason
+ for that? I was curious to see if it made a difference, so I
+ implemented LRU for your cache implementation and ran the test
+ workload of project 4 and printed cache hits/accesses. I found
+ that for that workload, the clock-based algorithm performs almost
+ identical to LRU (within about 1%, but I ran nondeterministally
+ with QEMU). I then reduced the cache size to 32 blocks and found
+ again the same performance, which raises the suspicion that the
+ test workload might not force any cache replacement, so the
+ eviction strategy doesn't matter.)
+
+ - Godmar: I haven't analyzed the tests for project 4 yet, but I'm
+ wondering if the fairness requirements your specification has for
+ readers/writers are covered in the tests or not.
+
+
+* Documentation:
+
+ - Add "Digging Deeper" sections that describe the nitty-gritty x86
+ details for the benefit of those interested.
+
+ - Add explanations of what "real" OSes do to give students some
+ perspective.
+
+* To add partition support:
+
+ - Find four partition types that are more or less unused and choose
+ to use them for Pintos. (This is implemented.)
+
+ - Bootloader reads partition tables of all BIOS devices to find the
+ first that has the "Pintos kernel" partition type. (This is
+ implemented.) Ideally the bootloader would make sure there is
+ exactly one such partition, but I didn't implement that yet.
+
+ - Bootloader reads kernel into memory at 1 MB using BIOS calls.
+ (This is implemented.)
+
+ - Kernel arguments have to go into a separate sector because the
+ bootloader is otherwise too big to fit now? (I don't recall if I
+ did anything about this.)
+
+ - Kernel at boot also scans partition tables of all the disks it can
+ find to find the ones with the four Pintos partition types
+ (perhaps not all exist). After that, it makes them available to
+ the rest of the kernel (and doesn't allow access to other devices,
+ for safety).
+
+ - "pintos" and "pintos-mkdisk" need to write a partition table to
+ the disks that they create. "pintos-mkdisk" will need to take a
+ new parameter specifying the type. (I might have partially
+ implemented this, don't remember.)
+
+ - "pintos" should insist on finding a partition header on disks
+ handed to it, for safety.
+
+ - Need some way for "pintos" to assemble multiple disks or
+ partitions into a single image that can be copied directly to a
+ USB block device. (I don't know whether I came up with a good
+ solution yet or not, or whether I implemented any of it.)
+
+* To add USB support:
+
+ - Needs to be able to scan PCI bus for UHCI controller. (I
+ implemented this partially.)
+
+ - May want to be able to initialize USB controllers over CardBus
+ bridges. I don't know whether this requires additional work or
+ if it's useful enough to warrant extra work. (It's of special
+ interest for me because I have a laptop that only has USB via
+ CardBus.)
+
+ - There are many protocol layers involved: SCSI over USB-Mass
+ Storage over USB over UHCI over PCI. (I may be forgetting one.)
+ I don't know yet whether it's best to separate the layers or to
+ merge (some of) them. I think that a simple and clean
+ organization should be a priority.
+
+ - VMware can likely be used for testing because it can expose host
+ USB devices as guest USB devices. This is safer and more
+ convenient than using real hardware for testing.
+
+ - Should test with a variety of USB keychain devices because there
+ seems to be wide variation among them, especially in the SCSI
+ protocols they support. Should try to use a "lowest-common
+ denominator" SCSI protocol if any such thing really exists.
+
+ - Might want to add a feature whereby kernel arguments can be
+ given interactively, rather than passed on-disk. Needs some
+ though.
+
+==========================================================================
+============================== COMPLETED TASKS ===========================
+==========================================================================
+
+* Godmar: Introduce memory leak robustness tests - both for the
+ well-behaved as well as the mis-behaved case - that tests that the
+ kernel handles low-mem conditions well.
+
+ - handled by new multi-oom.
+
+* Godmar: improved priority inheritance tests (see priority-donate-chain)