[pspp-builds.git] / doc / statistics.texi

@node Statistics
@chapter Statistics

This chapter documents the statistical procedures that PSPP supports so
far.

@menu
* DESCRIPTIVES::                Descriptive statistics.
* FREQUENCIES::                 Frequency tables.
* EXAMINE::                     Testing data for normality.
* CORRELATIONS::                Correlation tables.
* CROSSTABS::                   Crosstabulation tables.
* FACTOR::                      Factor analysis and Principal Components analysis
* NPAR TESTS::                  Nonparametric tests.
* T-TEST::                      Test hypotheses about means.
* ONEWAY::                      One way analysis of variance.
* RANK::                        Compute rank scores.
* REGRESSION::                  Linear regression.
* RELIABILITY::                 Reliability analysis.
* ROC::                         Receiver Operating Characteristic.
@end menu

@node DESCRIPTIVES
@section DESCRIPTIVES

@vindex DESCRIPTIVES
@display
DESCRIPTIVES
        /VARIABLES=var_list
        /MISSING=@{VARIABLE,LISTWISE@} @{INCLUDE,NOINCLUDE@}
        /FORMAT=@{LABELS,NOLABELS@} @{NOINDEX,INDEX@} @{LINE,SERIAL@}
        /SAVE
        /STATISTICS=@{ALL,MEAN,SEMEAN,STDDEV,VARIANCE,KURTOSIS,
                     SKEWNESS,RANGE,MINIMUM,MAXIMUM,SUM,DEFAULT,
                     SESKEWNESS,SEKURTOSIS@}
        /SORT=@{NONE,MEAN,SEMEAN,STDDEV,VARIANCE,KURTOSIS,SKEWNESS,
               RANGE,MINIMUM,MAXIMUM,SUM,SESKEWNESS,SEKURTOSIS,NAME@}
              @{A,D@}
@end display

The @cmd{DESCRIPTIVES} procedure reads the active file and outputs
descriptive
statistics requested by the user.  In addition, it can optionally
compute Z-scores.

The VARIABLES subcommand, which is required, specifies the list of
variables to be analyzed.  Keyword VARIABLES is optional.

All other subcommands are optional:

The MISSING subcommand determines the handling of missing variables.  If
INCLUDE is set, then user-missing values are included in the
calculations.  If NOINCLUDE is set, which is the default, user-missing
values are excluded.  If VARIABLE is set, then missing values are
excluded on a variable by variable basis; if LISTWISE is set, then
the entire case is excluded whenever any value in that case has a
system-missing or, if INCLUDE is set, user-missing value.

The FORMAT subcommand affects the output format.  Currently the
LABELS/NOLABELS and NOINDEX/INDEX settings are not used.  When SERIAL is
set, both valid and missing number of cases are listed in the output;
when NOSERIAL is set, only valid cases are listed.

The SAVE subcommand causes @cmd{DESCRIPTIVES} to calculate Z scores for all
the specified variables.  The Z scores are saved to new variables.
Variable names are generated by trying first the original variable name
with Z prepended and truncated to a maximum of 8 characters, then the
names ZSC000 through ZSC999, STDZ00 through STDZ09, ZZZZ00 through
ZZZZ09, ZQZQ00 through ZQZQ09, in that sequence.  In addition, Z score
variable names can be specified explicitly on VARIABLES in the variable
list by enclosing them in parentheses after each variable.

The STATISTICS subcommand specifies the statistics to be displayed:

@table @code
@item ALL
All of the statistics below.
@item MEAN
Arithmetic mean.
@item SEMEAN
Standard error of the mean.
@item STDDEV
Standard deviation.
@item VARIANCE
Variance.
@item KURTOSIS
Kurtosis and standard error of the kurtosis.
@item SKEWNESS
Skewness and standard error of the skewness.
@item RANGE
Range.
@item MINIMUM
Minimum value.
@item MAXIMUM
Maximum value.
@item SUM
Sum.
@item DEFAULT
Mean, standard deviation of the mean, minimum, maximum.
@item SEKURTOSIS
Standard error of the kurtosis.
@item SESKEWNESS
Standard error of the skewness.
@end table

The SORT subcommand specifies how the statistics should be sorted.  Most
of the possible values should be self-explanatory.  NAME causes the
statistics to be sorted by name.  By default, the statistics are listed
in the order that they are specified on the VARIABLES subcommand.  The A
and D settings request an ascending or descending sort order,
respectively.

@node FREQUENCIES
@section FREQUENCIES

@vindex FREQUENCIES
@display
FREQUENCIES
        /VARIABLES=var_list
        /FORMAT=@{TABLE,NOTABLE,LIMIT(limit)@}
                @{AVALUE,DVALUE,AFREQ,DFREQ@}
        /MISSING=@{EXCLUDE,INCLUDE@}
        /STATISTICS=@{DEFAULT,MEAN,SEMEAN,MEDIAN,MODE,STDDEV,VARIANCE,
                     KURTOSIS,SKEWNESS,RANGE,MINIMUM,MAXIMUM,SUM,
                     SESKEWNESS,SEKURTOSIS,ALL,NONE@}
        /NTILES=ntiles
        /PERCENTILES=percent@dots{}
        /HISTOGRAM=[MINIMUM(x_min)] [MAXIMUM(x_max)] 
                   [@{FREQ[(y_max)],PERCENT[(y_max)]@}] [@{NONORMAL,NORMAL@}]
        /PIECHART=[MINIMUM(x_min)] [MAXIMUM(x_max)]
                  [@{FREQ,PERCENT@}] [@{NOMISSING,MISSING@}]

(These options are not currently implemented.)
        /BARCHART=@dots{}
        /HBAR=@dots{}
        /GROUPED=@dots{}
@end display

The @cmd{FREQUENCIES} procedure outputs frequency tables for specified
variables.
@cmd{FREQUENCIES} can also calculate and display descriptive statistics
(including median and mode) and percentiles,
@cmd{FREQUENCIES} can also output
histograms and pie charts.  

The VARIABLES subcommand is the only required subcommand.  Specify the
variables to be analyzed.

The FORMAT subcommand controls the output format.  It has several
possible settings:  

@itemize @bullet
@item
TABLE, the default, causes a frequency table to be output for every
variable specified.  NOTABLE prevents them from being output.  LIMIT
with a numeric argument causes them to be output except when there are
more than the specified number of values in the table.

@item
Normally frequency tables are sorted in ascending order by value.  This
is AVALUE.  DVALUE tables are sorted in descending order by value.
AFREQ and DFREQ tables are sorted in ascending and descending order,
respectively, by frequency count.
@end itemize

The MISSING subcommand controls the handling of user-missing values.
When EXCLUDE, the default, is set, user-missing values are not included
in frequency tables or statistics.  When INCLUDE is set, user-missing
are included.  System-missing values are never included in statistics,
but are listed in frequency tables.

The available STATISTICS are the same as available in @cmd{DESCRIPTIVES}
(@pxref{DESCRIPTIVES}), with the addition of MEDIAN, the data's median
value, and MODE, the mode.  (If there are multiple modes, the smallest
value is reported.)  By default, the mean, standard deviation of the
mean, minimum, and maximum are reported for each variable.

@cindex percentiles
PERCENTILES causes the specified percentiles to be reported.
The percentiles should  be presented at a list of numbers between 0
and 100 inclusive.  
The NTILES subcommand causes the percentiles to be reported at the
boundaries of the data set divided into the specified number of ranges.
For instance, @code{/NTILES=4} would cause quartiles to be reported.

@cindex histogram
The HISTOGRAM subcommand causes the output to include a histogram for
each specified numeric variable.  The X axis by default ranges from
the minimum to the maximum value observed in the data, but the MINIMUM
and MAXIMUM keywords can set an explicit range.  Specify NORMAL to
superimpose a normal curve on the histogram.  Histograms are not
created for string variables.

@cindex piechart
The PIECHART adds a pie chart for each variable to the data.  Each
slice represents one value, with the size of the slice proportional to
the value's frequency.  By default, all non-missing values are given
slices.  The MINIMUM and MAXIMUM keywords can be used to limit the
displayed slices to a given range of values.  The MISSING keyword adds
slices for missing values.

The FREQ and PERCENT options on HISTOGRAM and PIECHART are accepted
but not currently honored.

@node EXAMINE
@comment  node-name,  next,  previous,  up
@section EXAMINE
@vindex EXAMINE

@cindex Normality, testing for

@display
EXAMINE
        VARIABLES=var_list [BY factor_list ]
        /STATISTICS=@{DESCRIPTIVES, EXTREME[(n)], ALL, NONE@}
        /PLOT=@{BOXPLOT, NPPLOT, HISTOGRAM, ALL, NONE@}
        /CINTERVAL n
        /COMPARE=@{GROUPS,VARIABLES@}
        /ID=var_name
        /@{TOTAL,NOTOTAL@}
        /PERCENTILE=[value_list]=@{HAVERAGE, WAVERAGE, ROUND, AEMPIRICAL, EMPIRICAL @}
        /MISSING=@{LISTWISE, PAIRWISE@} [@{EXCLUDE, INCLUDE@}] 
                [@{NOREPORT,REPORT@}]

@end display

The @cmd{EXAMINE} command is used to test how closely a distribution is to a 
normal distribution.  It also shows you outliers and extreme values.

The VARIABLES subcommand specifies the dependent variables and the
independent variable to use as factors for the analysis.   Variables
listed before the first BY keyword are the dependent variables.
The dependent variables may optionally be followed by a list of
factors which tell PSPP how to break down the analysis for each
dependent variable.  The format for each factor is 
@display
var [BY var].
@end display


The STATISTICS subcommand specifies the analysis to be done.  
DESCRIPTIVES will produce a table showing some parametric and
non-parametrics statistics.  EXTREME produces a table showing extreme
values of the dependent variable.  A number in parentheses determines
how many upper and lower extremes to show.  The default number is 5.


@cindex boxplot
@cindex histogram
@cindex npplot
The PLOT subcommand specifies which plots are to be produced if any.
Available plots are HISTOGRAM, NPPLOT and BOXPLOT.

The COMPARE subcommand is only relevant if producing boxplots, and it is only 
useful there is more than one dependent variable and at least one factor.   If 
/COMPARE=GROUPS is specified, then one plot per dependent variable is produced,
containing boxplots for all the factors.
If /COMPARE=VARIABLES is specified, then one plot per factor is produced, each 
each containing one boxplot per dependent variable.
If the /COMPARE subcommand is ommitted, then PSPP uses the default value of 
/COMPARE=GROUPS.
 
The ID subcommand also pertains to boxplots.  If given, it must
specify a variable name.   Outliers and extreme cases plotted in
boxplots will be labelled with the case from that variable.  Numeric or
string variables are permissible.  If the ID subcommand is not given,
then the casenumber will be used for labelling.

The CINTERVAL subcommand specifies the confidence interval to use in
calculation of the descriptives command.  The default it 95%.

@cindex percentiles
The PERCENTILES subcommand specifies which percentiles are to be calculated, 
and which algorithm to use for calculating them.  The default is to
calculate the 5, 10, 25, 50, 75, 90, 95 percentiles using the
HAVERAGE algorithm.

The TOTAL and NOTOTAL subcommands are mutually exclusive.  If NOTOTAL
is given and factors have been specified in the VARIABLES subcommand,
then then statistics for the unfactored dependent variables are
produced in addition to the factored variables.  If there are no
factors specified then TOTAL and NOTOTAL have no effect.

@strong{Warning!}
If many dependent variable are given, or factors are given for which
there are many distinct values, then @cmd{EXAMINE} will produce a very
large quantity of output.

@node CORRELATIONS
@section CORRELATIONS

@vindex CORRELATIONS
@display
CORRELATIONS
     /VARIABLES = varlist [ WITH varlist ]
     [
      .
      .
      .
      /VARIABLES = varlist [ WITH varlist ]
      /VARIABLES = varlist [ WITH varlist ]
     ]

     [ /PRINT=@{TWOTAIL, ONETAIL@} @{SIG, NOSIG@} ]
     [ /STATISTICS=DESCRIPTIVES XPROD ALL]
     [ /MISSING=@{PAIRWISE, LISTWISE@} @{INCLUDE, EXCLUDE@} ]
@end display    

@cindex correlation
The @cmd{CORRELATIONS} procedure produces tables of the Pearson correlation coefficient
for a set of variables.  The significance of the coefficients are also given.

At least one VARIABLES subcommand is required. If the WITH keyword is used, then a non-square
correlation table will be produced.
The variables preceding WITH, will be used as the rows of the table, and the variables following
will be the columns of the table.
If no WITH subcommand is given, then a square, symmetrical table using all variables is produced.


The @cmd{MISSING} subcommand determines the handling of missing variables.  
If INCLUDE is set, then user-missing values are included in the
calculations, but system-missing values are not.
If EXCLUDE is set, which is the default, user-missing
values are excluded as well as system-missing values. 
This is the default.

If LISTWISE is set, then the entire case is excluded from analysis
whenever any variable  specified in any @cmd{/VARIABLES} subcommand
contains a missing value.   
If PAIRWISE is set, then a case is considered missing only if either of the
values  for the particular coefficient are missing.
The default is PAIRWISE.

The PRINT subcommand is used to control how the reported significance values are printed.
If the TWOTAIL option is used, then a two-tailed test of significance is 
printed.  If the ONETAIL option is given, then a one-tailed test is used.
The default is TWOTAIL.

If the NOSIG option is specified, then correlation coefficients with significance less than
0.05 are highlighted.
If SIG is specified, then no highlighting is performed.  This is the default.

@cindex covariance
The STATISTICS subcommand requests additional statistics to be displayed.  The keyword 
DESCRIPTIVES requests that the mean, number of non-missing cases, and the non-biased
estimator of the standard deviation are displayed.
These statistics will be displayed in a separated table, for all the variables listed
in any /VARIABLES subcommand.
The XPROD keyword requests cross-product deviations and covariance estimators to 
be displayed for each pair of variables.
The keyword ALL is the union of DESCRIPTIVES and XPROD.

@node CROSSTABS
@section CROSSTABS

@vindex CROSSTABS
@display
CROSSTABS
        /TABLES=var_list BY var_list [BY var_list]@dots{}
        /MISSING=@{TABLE,INCLUDE,REPORT@}
        /WRITE=@{NONE,CELLS,ALL@}
        /FORMAT=@{TABLES,NOTABLES@}
                @{LABELS,NOLABELS,NOVALLABS@}
                @{PIVOT,NOPIVOT@}
                @{AVALUE,DVALUE@}
                @{NOINDEX,INDEX@}
                @{BOX,NOBOX@}
        /CELLS=@{COUNT,ROW,COLUMN,TOTAL,EXPECTED,RESIDUAL,SRESIDUAL,
                ASRESIDUAL,ALL,NONE@}
        /STATISTICS=@{CHISQ,PHI,CC,LAMBDA,UC,BTAU,CTAU,RISK,GAMMA,D,
                     KAPPA,ETA,CORR,ALL,NONE@}
        
(Integer mode.)
        /VARIABLES=var_list (low,high)@dots{}
@end display

The @cmd{CROSSTABS} procedure displays crosstabulation
tables requested by the user.  It can calculate several statistics for
each cell in the crosstabulation tables.  In addition, a number of
statistics can be calculated for each table itself.

The TABLES subcommand is used to specify the tables to be reported.  Any
number of dimensions is permitted, and any number of variables per
dimension is allowed.  The TABLES subcommand may be repeated as many
times as needed.  This is the only required subcommand in @dfn{general
mode}.  

Occasionally, one may want to invoke a special mode called @dfn{integer
mode}.  Normally, in general mode, PSPP automatically determines
what values occur in the data.  In integer mode, the user specifies the
range of values that the data assumes.  To invoke this mode, specify the
VARIABLES subcommand, giving a range of data values in parentheses for
each variable to be used on the TABLES subcommand.  Data values inside
the range are truncated to the nearest integer, then assigned to that
value.  If values occur outside this range, they are discarded.  When it
is present, the VARIABLES subcommand must precede the TABLES
subcommand.

In general mode, numeric and string variables may be specified on
TABLES.  In integer mode, only numeric variables are allowed.

The MISSING subcommand determines the handling of user-missing values.
When set to TABLE, the default, missing values are dropped on a table by
table basis.  When set to INCLUDE, user-missing values are included in
tables and statistics.  When set to REPORT, which is allowed only in
integer mode, user-missing values are included in tables but marked with
an @samp{M} (for ``missing'') and excluded from statistical
calculations.

Currently the WRITE subcommand is ignored.

The FORMAT subcommand controls the characteristics of the
crosstabulation tables to be displayed.  It has a number of possible
settings:

@itemize @bullet
@item
TABLES, the default, causes crosstabulation tables to be output.
NOTABLES suppresses them.

@item
LABELS, the default, allows variable labels and value labels to appear
in the output.  NOLABELS suppresses them.  NOVALLABS displays variable
labels but suppresses value labels.

@item
PIVOT, the default, causes each TABLES subcommand to be displayed in a
pivot table format.  NOPIVOT causes the old-style crosstabulation format
to be used.

@item
AVALUE, the default, causes values to be sorted in ascending order.
DVALUE asserts a descending sort order.

@item
INDEX/NOINDEX is currently ignored.

@item
BOX/NOBOX is currently ignored.
@end itemize

The CELLS subcommand controls the contents of each cell in the displayed
crosstabulation table.  The possible settings are:

@table @asis
@item COUNT
Frequency count.
@item ROW
Row percent.
@item COLUMN
Column percent.
@item TOTAL
Table percent.
@item EXPECTED
Expected value.
@item RESIDUAL 
Residual.
@item SRESIDUAL
Standardized residual.
@item ASRESIDUAL
Adjusted standardized residual.
@item ALL
All of the above.
@item NONE
Suppress cells entirely.
@end table

@samp{/CELLS} without any settings specified requests COUNT, ROW,
COLUMN, and TOTAL.  If CELLS is not specified at all then only COUNT
will be selected.

The STATISTICS subcommand selects statistics for computation:

@table @asis
@item CHISQ
@cindex chisquare
@cindex chi-square

Pearson chi-square, likelihood ratio, Fisher's exact test, continuity
correction, linear-by-linear association.
@item PHI
Phi.
@item CC
Contingency coefficient.
@item LAMBDA
Lambda.
@item UC
Uncertainty coefficient.
@item BTAU
Tau-b.
@item CTAU
Tau-c.
@item RISK
Risk estimate.
@item GAMMA
Gamma.
@item D
Somers' D.
@item KAPPA
Cohen's Kappa.
@item ETA
Eta.
@item CORR
Spearman correlation, Pearson's r.
@item ALL
All of the above.
@item NONE
No statistics.
@end table

Selected statistics are only calculated when appropriate for the
statistic.  Certain statistics require tables of a particular size, and
some statistics are calculated only in integer mode.

@samp{/STATISTICS} without any settings selects CHISQ.  If the
STATISTICS subcommand is not given, no statistics are calculated.

@strong{Please note:} Currently the implementation of CROSSTABS has the
followings bugs:

@itemize @bullet
@item
Pearson's R (but not Spearman) is off a little.
@item
T values for Spearman's R and Pearson's R are wrong.
@item
Significance of symmetric and directional measures is not calculated.
@item
Asymmetric ASEs and T values for lambda are wrong.
@item
ASE of Goodman and Kruskal's tau is not calculated.
@item
ASE of symmetric somers' d is wrong.
@item
Approximate T of uncertainty coefficient is wrong.
@end itemize

Fixes for any of these deficiencies would be welcomed.

@node FACTOR
@section FACTOR

@vindex FACTOR
@cindex factor analysis
@cindex principal components analysis
@cindex principal axis factoring
@cindex data reduction

@display
FACTOR  VARIABLES=var_list

        [ /METHOD = @{CORRELATION, COVARIANCE@} ]

        [ /EXTRACTION=@{PC, PAF@}] 

        [ /ROTATION=@{VARIMAX, EQUAMAX, QUARTIMAX, NOROTATE@}]

        [ /PRINT=[INITIAL] [EXTRACTION] [ROTATION] [UNIVARIATE] [CORRELATION] [COVARIANCE] [DET] [SIG] [ALL] [DEFAULT] ]

        [ /PLOT=[EIGEN] ]

        [ /FORMAT=[SORT] [BLANK(@var{n})] [DEFAULT] ]

        [ /CRITERIA=[FACTORS(@var{n})] [MINEIGEN(@var{l})] [ITERATE(@var{m})] [ECONVERGE (@var{delta})] [DEFAULT] ]

        [ /MISSING=[@{LISTWISE, PAIRWISE@}] [@{INCLUDE, EXCLUDE@}] ]
@end display

The FACTOR command performs Factor Analysis or Principal Axis Factoring on a dataset.  It may be used to find
common factors in the data or for data reduction purposes.

The VARIABLES subcommand is required.  It lists the variables which are to partake in the analysis.

The /EXTRACTION subcommand is used to specify the way in which factors (components) are extracted from the data.
If PC is specified, then Principal Components Analysis is used.  If PAF is specified, then Principal Axis Factoring is
used. By default Principal Components Analysis will be used.

The /ROTATION subcommand is used to specify the method by which the extracted solution will be rotated.
Three methods are available: VARIMAX (which is the default), EQUAMAX, and QUARTIMAX.
If don't want any rotation to be performed, the word NOROTATE will prevent the command from performing any
rotation on the data. Oblique rotations are not supported.

The /METHOD subcommand should be used to determine whether the covariance matrix or the correlation matrix of the data is
to be analysed.  By default, the correlation matrix is analysed.

The /PRINT subcommand may be used to select which features of the analysis are reported:

@itemize
@item UNIVARIATE
      A table of mean values, standard deviations and total weights are printed.
@item INITIAL
      Initial communalities and eigenvalues are printed.
@item EXTRACTION
      Extracted communalities and eigenvalues are printed.
@item ROTATION
      Rotated communalities and eigenvalues are printed.
@item CORRELATION
      The correlation matrix is printed.
@item COVARIANCE
      The covariance matrix is printed.
@item DET
      The determinant of the correlation or covariance matrix is printed.
@item SIG
      The significance of the elements of correlation matrix is printed.
@item ALL
      All of the above are printed.
@item DEFAULT
      Identical to INITIAL and EXTRACTION.
@end itemize

If /PLOT=EIGEN is given, then a ``Scree'' plot of the eigenvalues will be printed.  This can be useful for visualising
which factors (components) should be retained.

The /FORMAT subcommand determined how data are to be displayed in loading matrices.  If SORT is specified, then the variables
are sorted in descending order of significance.  If BLANK(@var{n}) is specified, then coefficients whose absolute value is less
than @var{n} will not be printed.  If the keyword DEFAULT is given, or if no /FORMAT subcommand is given, then no sorting is 
performed, and all coefficients will be printed.

The /CRITERIA subcommand is used to specify how the number of extracted factors (components) are chosen.  If FACTORS(@var{n}) is
specified, where @var{n} is an integer, then @var{n} factors will be extracted.  Otherwise, the MINEIGEN setting will
be used.  MINEIGEN(@var{l}) requests that all factors whose eigenvalues are greater than or equal to @var{l} are extracted.
The default value of @var{l} is 1.    The ECONVERGE and ITERATE settings have effect only when iterative algorithms for factor
extraction (such as Principal Axis Factoring) are used.   ECONVERGE(@var{delta}) specifies that iteration should cease when
the maximum absolute value of the communality estimate between one iteration and the previous is less than @var{delta}. The
default value of @var{delta} is 0.001.
The ITERATE(@var{m}) setting sets the maximum number of iterations to @var{m}.  The default value of @var{m} is 25.

The @cmd{MISSING} subcommand determines the handling of missing variables.  
If INCLUDE is set, then user-missing values are included in the
calculations, but system-missing values are not.
If EXCLUDE is set, which is the default, user-missing
values are excluded as well as system-missing values. 
This is the default.
If LISTWISE is set, then the entire case is excluded from analysis
whenever any variable  specified in the @cmd{VARIABLES} subcommand
contains a missing value.   
If PAIRWISE is set, then a case is considered missing only if either of the
values  for the particular coefficient are missing.
The default is LISTWISE.
 

@node NPAR TESTS
@section NPAR TESTS

@vindex NPAR TESTS
@cindex nonparametric tests

@display 
NPAR TESTS
     
     nonparametric test subcommands
     .
     .
     .
     
     [ /STATISTICS=@{DESCRIPTIVES@} ]

     [ /MISSING=@{ANALYSIS, LISTWISE@} @{INCLUDE, EXCLUDE@} ]

     [ /METHOD=EXACT [ TIMER [(n)] ] ]
@end display

NPAR TESTS performs nonparametric tests. 
Non parametric tests make very few assumptions about the distribution of the 
data.
One or more tests may be specified by using the corresponding subcommand.
If the /STATISTICS subcommand is also specified, then summary statistics are 
produces for each variable that is the subject of any test.

Certain tests may take a long time to execute, if an exact figure is required.
Therefore, by default asymptotic approximations are used unless the
subcommand /METHOD=EXACT is specified.  
Exact tests give more accurate results, but may take an unacceptably long 
time to perform.  If the TIMER keyword is used, it sets a maximum time,
after which the test will be abandoned, and a warning message printed.
The time, in minutes, should be specified in parentheses after the TIMER keyword.
If the TIMER keyword is given without this figure, then a default value of 5 minutes 
is used.


@menu
* BINOMIAL::                Binomial Test
* CHISQUARE::               Chisquare Test
* WILCOXON::                Wilcoxon Signed Ranks Test
* SIGN::                    The Sign Test
@end menu


@node    BINOMIAL
@subsection Binomial test
@vindex BINOMIAL
@cindex binomial test

@display 
     [ /BINOMIAL[(p)]=var_list[(value1[, value2)] ] ]
@end display 

The /BINOMIAL subcommand compares the observed distribution of a dichotomous 
variable with that of a binomial distribution.
The variable @var{p} specifies the test proportion of the binomial 
distribution.  
The default value of 0.5 is assumed if @var{p} is omitted.

If a single value appears after the variable list, then that value is
used as the threshold to partition the observed values. Values less
than or equal to the threshold value form the first category.  Values
greater than the threshold form the second category. 

If two values appear after the variable list, then they will be used
as the values which a variable must take to be in the respective
category. 
Cases for which a variable takes a value equal to neither of the specified  
values, take no part in the test for that variable.

If no values appear, then the variable must assume dichotomous
values.
If more than two distinct, non-missing values for a variable
under test are encountered then an error occurs.

If the test proportion is equal to 0.5, then a two tailed test is
reported.   For any other test proportion, a one tailed test is
reported.   
For one tailed tests, if the test proportion is less than
or equal to the observed proportion, then the significance of
observing the observed proportion or more is reported.
If the test proportion is more than the observed proportion, then the
significance of observing the observed proportion or less is reported.
That is to say, the test is always performed in the observed
direction. 

PSPP uses a very precise approximation to the gamma function to
compute the binomial significance.  Thus, exact results are reported
even for very large sample sizes.



@node    CHISQUARE
@subsection Chisquare Test
@vindex CHISQUARE
@cindex chisquare test


@display
     [ /CHISQUARE=var_list[(lo,hi)] [/EXPECTED=@{EQUAL|f1, f2 @dots{} fn@}] ]
@end display 


The /CHISQUARE subcommand produces a chi-square statistic for the differences 
between the expected and observed frequencies of the categories of a variable. 
Optionally, a range of values may appear after the variable list.  
If a range is given, then non integer values are truncated, and values
outside the  specified range are excluded from the analysis.

The /EXPECTED subcommand specifies the expected values of each
category.  
There must be exactly one non-zero expected value, for each observed
category, or the EQUAL keywork must be specified.
You may use the notation @var{n}*@var{f} to specify @var{n}
consecutive expected categories all taking a frequency of @var{f}.
The frequencies given are proportions, not absolute frequencies.  The
sum of the frequencies need not be 1.
If no /EXPECTED subcommand is given, then then equal frequencies 
are expected.

@node WILCOXON
@subsection Wilcoxon Matched Pairs Signed Ranks Test
@comment  node-name,  next,  previous,  up
@vindex WILCOXON
@cindex wilcoxon matched pairs signed ranks test

@display
     [ /WILCOXON varlist [ WITH varlist [ (PAIRED) ]]]
@end display

The /WILCOXON subcommand tests for differences between medians of the 
variables listed.
The test does not make any assumptions about the variances of the samples.
It does however assume that the distribution is symetrical.

If the @code{WITH} keyword is omitted, then tests for all
combinations of the listed variables are performed.
If the @code{WITH} keyword is given, and the @code{(PAIRED)} keyword
is also given, then the number of variables preceding @code{WITH}
must be the same as the number following it.
In this case, tests for each respective pair of variables are
performed.
If the @code{WITH} keyword is given, but the
@code{(PAIRED)} keyword is omitted, then tests for each combination
of variable preceding @code{WITH} against variable following
@code{WITH} are performed.


@node SIGN
@subsection Sign Test
@vindex SIGN
@cindex sign test

@display
     [ /SIGN varlist [ WITH varlist [ (PAIRED) ]]]
@end display

The /SIGN subcommand tests for differences between medians of the 
variables listed.
The test does not make any assumptions about the
distribution of the data.

If the @code{WITH} keyword is omitted, then tests for all
combinations of the listed variables are performed.
If the @code{WITH} keyword is given, and the @code{(PAIRED)} keyword
is also given, then the number of variables preceding @code{WITH}
must be the same as the number following it.
In this case, tests for each respective pair of variables are
performed.
If the @code{WITH} keyword is given, but the
@code{(PAIRED)} keyword is omitted, then tests for each combination
of variable preceding @code{WITH} against variable following
@code{WITH} are performed.

@node T-TEST
@comment  node-name,  next,  previous,  up
@section T-TEST

@vindex T-TEST

@display
T-TEST
        /MISSING=@{ANALYSIS,LISTWISE@} @{EXCLUDE,INCLUDE@}
        /CRITERIA=CIN(confidence)


(One Sample mode.)
        TESTVAL=test_value
        /VARIABLES=var_list


(Independent Samples mode.)
        GROUPS=var(value1 [, value2])
        /VARIABLES=var_list


(Paired Samples mode.)
        PAIRS=var_list [WITH var_list [(PAIRED)] ]

@end display


The @cmd{T-TEST} procedure outputs tables used in testing hypotheses about 
means.  
It operates in one of three modes:
@itemize
@item One Sample mode.
@item Independent Groups mode.
@item Paired mode.
@end itemize

@noindent
Each of these modes are described in more detail below.
There are two optional subcommands which are common to all modes.

The @cmd{/CRITERIA} subcommand tells PSPP the confidence interval used
in the tests.  The default value is 0.95.


The @cmd{MISSING} subcommand determines the handling of missing
variables.  
If INCLUDE is set, then user-missing values are included in the
calculations, but system-missing values are not.
If EXCLUDE is set, which is the default, user-missing
values are excluded as well as system-missing values. 
This is the default.

If LISTWISE is set, then the entire case is excluded from analysis
whenever any variable  specified in the @cmd{/VARIABLES}, @cmd{/PAIRS} or 
@cmd{/GROUPS} subcommands contains a missing value.   
If ANALYSIS is set, then missing values are excluded only in the analysis for
which they would be needed. This is the default.


@menu
* One Sample Mode::             Testing against a hypothesised mean
* Independent Samples Mode::    Testing two independent groups for equal mean
* Paired Samples Mode::         Testing two interdependent groups for equal mean
@end menu

@node One Sample Mode
@subsection One Sample Mode

The @cmd{TESTVAL} subcommand invokes the One Sample mode.
This mode is used to test a population mean against a hypothesised
mean. 
The value given to the @cmd{TESTVAL} subcommand is the value against
which you wish to test.
In this mode, you must also use the @cmd{/VARIABLES} subcommand to
tell PSPP which variables you wish to test.

@node Independent Samples Mode
@comment  node-name,  next,  previous,  up
@subsection Independent Samples Mode

The @cmd{GROUPS} subcommand invokes Independent Samples mode or
`Groups' mode. 
This mode is used to test whether two groups of values have the
same population mean.
In this mode, you must also use the @cmd{/VARIABLES} subcommand to
tell PSPP the dependent variables you wish to test.

The variable given in the @cmd{GROUPS} subcommand is the independent
variable which determines to which group the samples belong.
The values in parentheses are the specific values of the independent
variable for each group.
If the parentheses are omitted and no values are given, the default values 
of 1.0 and 2.0 are assumed.

If the independent variable is numeric, 
it is acceptable to specify only one value inside the parentheses.
If you do this, cases where the independent variable is
greater than or equal to this value belong to the first group, and cases
less than this value belong to the second group.
When using this form of the @cmd{GROUPS} subcommand, missing values in
the independent variable are excluded on a listwise basis, regardless
of whether @cmd{/MISSING=LISTWISE} was specified.


@node Paired Samples Mode
@comment  node-name,  next,  previous,  up
@subsection Paired Samples Mode

The @cmd{PAIRS} subcommand introduces Paired Samples mode.
Use this mode when repeated measures have been taken from the same
samples.
If the @code{WITH} keyword is omitted, then tables for all
combinations of variables given in the @cmd{PAIRS} subcommand are
generated. 
If the @code{WITH} keyword is given, and the @code{(PAIRED)} keyword
is also given, then the number of variables preceding @code{WITH}
must be the same as the number following it.
In this case, tables for each respective pair of variables are
generated.
In the event that the @code{WITH} keyword is given, but the
@code{(PAIRED)} keyword is omitted, then tables for each combination
of variable preceding @code{WITH} against variable following
@code{WITH} are generated.


@node ONEWAY
@comment  node-name,  next,  previous,  up
@section ONEWAY

@vindex ONEWAY
@cindex analysis of variance
@cindex ANOVA

@display
ONEWAY
        [/VARIABLES = ] var_list BY var
        /MISSING=@{ANALYSIS,LISTWISE@} @{EXCLUDE,INCLUDE@}
        /CONTRAST= value1 [, value2] ... [,valueN]
        /STATISTICS=@{DESCRIPTIVES,HOMOGENEITY@}

@end display

The @cmd{ONEWAY} procedure performs a one-way analysis of variance of
variables factored by a single independent variable.
It is used to compare the means of a population
divided into more than two groups. 

The dependent variables to be analysed should be given in the @code{VARIABLES}
subcommand.  
The list of variables must be followed by the @code{BY} keyword and
the name of the independent (or factor) variable.

You can use the @code{STATISTICS} subcommand to tell PSPP to display
ancilliary information.  The options accepted are:
@itemize
@item DESCRIPTIVES
Displays descriptive statistics about the groups factored by the independent
variable.
@item HOMOGENEITY
Displays the Levene test of Homogeneity of Variance for the
variables and their groups.
@end itemize

The @code{CONTRAST} subcommand is used when you anticipate certain
differences between the groups.
The subcommand must be followed by a list of numerals which are the
coefficients of the groups to be tested.
The number of coefficients must correspond to the number of distinct
groups (or values of the independent variable).
If the total sum of the coefficients are not zero, then PSPP will
display a warning, but will proceed with the analysis.
The @code{CONTRAST} subcommand may be given up to 10 times in order
to specify different contrast tests.
The @code{MISSING} subcommand defines how missing values are handled.
If LISTWISE is specified then cases which have missing values for 
the independent variable or any dependent variable will be ignored.
If ANALYSIS is specified, then cases will be ignored if the independent
variable is missing or if the dependent variable currently being 
analysed is missing.  The default is ANALYSIS.
A setting of EXCLUDE means that variables whose values are
user-missing are to be excluded from the analysis. A setting of
INCLUDE means they are to be included.  The default is EXCLUDE.


@node RANK
@comment  node-name,  next,  previous,  up
@section RANK

@vindex RANK
@display
RANK
        [VARIABLES=] var_list [@{A,D@}] [BY var_list]
        /TIES=@{MEAN,LOW,HIGH,CONDENSE@}
        /FRACTION=@{BLOM,TUKEY,VW,RANKIT@}
        /PRINT[=@{YES,NO@}
        /MISSING=@{EXCLUDE,INCLUDE@}

        /RANK [INTO var_list]
        /NTILES(k) [INTO var_list]
        /NORMAL [INTO var_list]
        /PERCENT [INTO var_list]
        /RFRACTION [INTO var_list]
        /PROPORTION [INTO var_list]
        /N [INTO var_list]
        /SAVAGE [INTO var_list]
@end display

The @cmd{RANK} command ranks variables and stores the results into new
variables. 

The VARIABLES subcommand, which is mandatory, specifies one or
more variables whose values are to be ranked.  
After each variable, @samp{A} or @samp{D} may appear, indicating that
the variable is to be ranked in ascending or descending order.
Ascending is the default.
If a BY keyword appears, it should be followed by a list of variables
which are to serve as group variables.  
In this case, the cases are gathered into groups, and ranks calculated
for each group.

The TIES subcommand specifies how tied values are to be treated.  The
default is to take the mean value of all the tied cases.

The FRACTION subcommand specifies how proportional ranks are to be
calculated.  This only has any effect if NORMAL or PROPORTIONAL rank
functions are requested.

The PRINT subcommand may be used to specify that a summary of the rank
variables created should appear in the output.

The function subcommands are RANK, NTILES, NORMAL, PERCENT, RFRACTION,
PROPORTION and SAVAGE.  Any number of function subcommands may appear.
If none are given, then the default is RANK.
The NTILES subcommand must take an integer specifying the number of
partitions into which values should be ranked.
Each subcommand may be followed by the INTO keyword and a list of
variables which are the variables to be created and receive the rank
scores.  There may be as many variables specified as there are
variables named on the VARIABLES subcommand.  If fewer are specified,
then the variable names are automatically created.

The MISSING subcommand determines how user missing values are to be
treated. A setting of EXCLUDE means that variables whose values are
user-missing are to be excluded from the rank scores. A setting of
INCLUDE means they are to be included.  The default is EXCLUDE.

@include regression.texi


@node RELIABILITY
@section RELIABILITY

@vindex RELIABILITY
@display
RELIABILITY
        /VARIABLES=var_list
        /SCALE (@var{name}) = @{var_list, ALL@}
        /MODEL=@{ALPHA, SPLIT[(N)]@}
        /SUMMARY=@{TOTAL,ALL@}
        /MISSING=@{EXCLUDE,INCLUDE@}
@end display

@cindex Cronbach's Alpha
The @cmd{RELIABILTY} command performs reliablity analysis on the data.

The VARIABLES subcommand is required. It determines the set of variables 
upon which analysis is to be performed.

The SCALE subcommand determines which variables reliability is to be 
calculated for.  If it is omitted, then analysis for all variables named
in the VARIABLES subcommand will be used.
Optionally, the @var{name} parameter may be specified to set a string name 
for the scale.

The MODEL subcommand determines the type of analysis. If ALPHA is specified, 
then Cronbach's Alpha is calculated for the scale.  If the model is SPLIT, 
then the variables  are divided into 2 subsets.  An optional parameter 
@var{N} may be given, to specify how many variables to be in the first subset.
If @var{N} is omitted, then it defaults to one half of the variables in the 
scale, or one half minus one if there are an odd number of variables.
The default model is ALPHA.

By default, any cases with user missing, or system missing values for 
any variables given 
in the VARIABLES subcommand will be omitted from analysis.
The MISSING subcommand determines whether user missing values are to 
be included or excluded in the analysis.

The SUMMARY subcommand determines the type of summary analysis to be performed.
Currently there is only one type: SUMMARY=TOTAL, which displays per-item
analysis tested against the totals.



@node ROC
@section ROC

@vindex ROC
@cindex Receiver Operating Characterstic
@cindex Area under curve

@display
ROC     @var{var_list} BY @var{state_var} (@var{state_value})
        /PLOT = @{ CURVE [(REFERENCE)], NONE @}
        /PRINT = [ SE ] [ COORDINATES ]
        /CRITERIA = [ CUTOFF(@{INCLUDE,EXCLUDE@}) ]
          [ TESTPOS (@{LARGE,SMALL@}) ]
          [ CI (@var{confidence}) ]
          [ DISTRIBUTION (@{FREE, NEGEXPO @}) ]
        /MISSING=@{EXCLUDE,INCLUDE@}
@end display


The @cmd{ROC} command is used to plot the receiver operating characteristic curve 
of a dataset, and to estimate the area under the curve.
This is useful for analysing the efficacy of a variable as a predictor of a state of nature.

The mandatory @var{var_list} is the list of predictor variables.
The variable @var{state_var} is the variable whose values represent the actual states, 
and @var{state_value} is the value of this variable which represents the positive state.

The optional subcommand PLOT is used to determine if and how the ROC curve is drawn.
The keyword CURVE means that the ROC curve should be drawn, and the optional keyword REFERENCE,
which should be enclosed in parentheses, says that the diagonal reference line should be drawn.
If the keyword NONE is given, then no ROC curve is drawn.
By default, the curve is drawn with no reference line.

The optional subcommand PRINT determines which additional tables should be printed.
Two additional tables are available. 
The SE keyword says that standard error of the area under the curve should be printed as well as
the area itself.
In addition, a p-value under the null hypothesis that the area under the curve equals 0.5 will be
printed.
The COORDINATES keyword says that a table of coordinates of the ROC curve should be printed.

The CRITERIA subcommand has four optional parameters:
@itemize @bullet
@item The TESTPOS parameter may be LARGE or SMALL.
LARGE is the default, and says that larger values in the predictor variables are to be 
considered positive.  SMALL indicates that smaller values should be considered positive.

@item The CI parameter specifies the confidence interval that should be printed.
It has no effect if the SE keyword in the PRINT subcommand has not been given.

@item The DISTRIBUTION parameter determines the method to be used when estimating the area
under the curve.  
There are two possibilities, @i{viz}: FREE and NEGEXPO.
The FREE method uses a non-parametric estimate, and the NEGEXPO method a bi-negative 
exponential distribution estimate.
The NEGEXPO method should only be used when the number of positive actual states is
equal to the number of negative actual states.
The default is FREE.

@item The CUTOFF parameter is for compatibility and is ignored.
@end itemize

The MISSING subcommand determines whether user missing values are to 
be included or excluded in the analysis.  The default behaviour is to
exclude them.
Cases are excluded on a listwise basis; if any of the variables in @var{var_list} 
or if the variable @var{state_var} is missing, then the entire case will be 
excluded.