Bruno Haible [Sun, 8 May 2011 19:24:22 +0000 (21:24 +0200)]
iconv_open: Move AC_LIBOBJ invocations to module description.
* m4/iconv_open.m4 (gl_FUNC_ICONV_OPEN, gl_REPLACE_ICONV_OPEN): Move
AC_LIBOBJ invocations from here...
* modules/iconv_open (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 19:03:04 +0000 (21:03 +0200)]
iconv_open, iconv_open-utf: Respect rules for use of AC_LIBOBJ.
If module 'iconv_open' is among the main modules and module
'iconv_open-utf' is among the tests dependencies, then
REPLACE_ICONV_UTF will be defined to 1, hence iconv_open() in lib may
return the special iconv_t values. Therefore iconv() and iconv_close()
must support these special iconv_t values, already in lib, not only in
tests.
* m4/iconv_open-utf.m4: New file, extracted from m4/iconv_open.m4.
* m4/iconv_open.m4 (gl_FUNC_ICONV_OPEN): Invoke
gl_FUNC_ICONV_OPEN_UTF_SUPPORT if present.
(gl_FUNC_ICONV_OPEN_UTF): Remove macro.
* modules/iconv_open (Files): Add lib/iconv.c, lib/iconv_close.c.
(Depends-on): Add the dependencies of iconv_open-utf.
* modules/iconv_open-utf (Files): Add m4/iconv_open-utf.m4. Remove
m4/iconv_open.m4, lib/iconv.c, lib/iconv_close.c.
(Depends-on): Remove modules needed by lib/iconv.c, lib/iconv_close.c.
Bruno Haible [Sun, 8 May 2011 18:42:41 +0000 (20:42 +0200)]
group-member: Move AC_LIBOBJ invocations to module description.
* m4/group-member.m4 (gl_FUNC_GROUP_MEMBER): Set HAVE_GROUP_MEMBER.
Move AC_LIBOBJ and gl_PREREQ_GROUP_MEMBER invocations from here...
* modules/group-member (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 17:38:45 +0000 (19:38 +0200)]
grantpt: Move AC_LIBOBJ invocations to module description.
* m4/grantpt.m4 (gl_FUNC_GRANTPT): Move AC_LIBOBJ and gl_PREREQ_GRANTPT
invocations from here...
* modules/grantpt (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 17:36:38 +0000 (19:36 +0200)]
glob: Move AC_LIBOBJ invocations to module description.
* m4/glob.m4 (gl_GLOB): Move AC_LIBOBJ and gl_PREREQ_GLOB invocations
from here...
* modules/glob (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 16:21:24 +0000 (18:21 +0200)]
getusershell: Move AC_LIBOBJ invocations to module description.
* m4/getusershell.m4 (gl_FUNC_GETUSERSHELL): Set HAVE_GETUSERSHELL.
Move AC_LIBOBJ invocation from here...
* modules/getusershell (configure.ac): ... to here.
(Depends-on): Update condition.
Bruno Haible [Sun, 8 May 2011 16:17:25 +0000 (18:17 +0200)]
gettimeofday: Move AC_LIBOBJ invocations to module description.
* m4/gettimeofday.m4 (gl_FUNC_GETTIMEOFDAY,
gl_GETTIMEOFDAY_REPLACE_LOCALTIME): Move AC_LIBOBJ and
gl_PREREQ_GETTIMEOFDAY invocations from here...
* modules/gettimeofday (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 15:45:18 +0000 (17:45 +0200)]
gettimeofday, tzset: Respect rules for use of AC_LIBOBJ.
* modules/tzset (configure.ac): Don't invoke gl_FUNC_TZSET_CLOBBER,
just gl_FUNC_TZSET.
* m4/tzset.m4 (gl_FUNC_TZSET): New macro.
(gl_FUNC_TZSET_CLOBBER): Remove actions.
* m4/gettimeofday.m4 (gl_FUNC_GETTIMEOFDAY): Invoke
gl_FUNC_TZSET_CLOBBER and its actions here, if present.
Bruno Haible [Sun, 8 May 2011 11:24:43 +0000 (13:24 +0200)]
getsubopt: Move AC_LIBOBJ invocations to module description.
* m4/getsubopt.m4 (gl_FUNC_GETSUBOPT): Move AC_LIBOBJ and
gl_PREREQ_GETSUBOPT invocations from here...
* modules/getsubopt (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 11:21:50 +0000 (13:21 +0200)]
getpass-gnu: Move AC_LIBOBJ invocations to module description.
* m4/getpass.m4 (gl_FUNC_GETPASS_GNU): Set REPLACE_GETPASS. Move
AC_LIBOBJ and gl_PREREQ_GETPASS invocations from here...
* modules/getpass-gnu (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 11:18:21 +0000 (13:18 +0200)]
getpass: Move AC_LIBOBJ invocations to module description.
* m4/getpass.m4 (gl_FUNC_GETPASS): Set HAVE_GETPASS. Move AC_LIBOBJ and
gl_PREREQ_GETPASS invocations from here...
* modules/getpass (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 11:10:22 +0000 (13:10 +0200)]
getpagesize: Move AC_LIBOBJ invocations to module description.
* m4/getpagesize.m4 (gl_FUNC_GETPAGESIZE): Move AC_LIBOBJ invocation
from here...
* modules/getpagesize (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 11:05:47 +0000 (13:05 +0200)]
getopt: Move AC_LIBOBJ invocations to module description.
* m4/getopt.m4 (gl_REPLACE_GETOPT): Remove macro.
(gl_FUNC_GETOPT): Inline it here. Move AC_LIBOBJ and gl_PREREQ_GETOPT
invocations from here...
* modules/getopt-gnu (configure.ac): ... to here.
* modules/getopt-posix (configure.ac): ... and here.
(Depends-on): Update condition.
Bruno Haible [Sun, 8 May 2011 11:00:10 +0000 (13:00 +0200)]
getopt, argp: Respect rules for use of AC_LIBOBJ.
* m4/argp.m4 (gl_ARGP): Don't invoke gl_REPLACE_GETOPT.
(gl_REPLACE_GETOPT_ALWAYS): New macro.
* m4/getopt.m4 (gl_FUNC_GETOPT_POSIX): Test whether
gl_REPLACE_GETOPT_ALWAYS is defined. Set REPLACE_GETOPT.
Bruno Haible [Sun, 8 May 2011 10:18:00 +0000 (12:18 +0200)]
getlogin_r: Move AC_LIBOBJ invocations to module description.
* m4/getlogin_r.m4 (gl_FUNC_GETLOGIN_R): Move AC_LIBOBJ and
gl_PREREQ_GETLOGIN_R invocations from here...
* modules/getlogin_r (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 10:15:52 +0000 (12:15 +0200)]
getlogin: Move AC_LIBOBJ invocations to module description.
* m4/getlogin.m4 (gl_FUNC_GETLOGIN): Move AC_LIBOBJ invocation from
here...
* modules/getlogin (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 10:14:03 +0000 (12:14 +0200)]
getloadavg: Move AC_LIBOBJ invocations to module description.
* m4/getloadavg.m4 (gl_FUNC_GETDELIM): Set HAVE_GETLOADAVG. Move
AC_LIBOBJ and gl_PREREQ_GETLOADAVG invocations from here...
* modules/getloadavg (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 10:06:27 +0000 (12:06 +0200)]
gethrxtime: Move AC_LIBOBJ invocations to module description.
* m4/gethrxtime.m4 (gl_PREREQ_GETHRXTIME): Move code that determines
LIB_GETHRXTIME from here...
(gl_GETHRXTIME): ... to here. Move AC_LIBOBJ and gl_PREREQ_GETHRXTIME
invocations from here...
* modules/gethrxtime (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 09:48:45 +0000 (11:48 +0200)]
gethostname: Move AC_LIBOBJ invocations to module description.
* m4/gethostname.m4 (gl_FUNC_GETHOSTNAME): Move AC_LIBOBJ and
gl_PREREQ_GETHOSTNAME invocations from here...
* modules/gethostname (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 09:46:22 +0000 (11:46 +0200)]
getgroups: Move AC_LIBOBJ invocations to module description.
* m4/getgroups.m4 (gl_FUNC_GETGROUPS): Move AC_LIBOBJ invocations from
here...
* modules/getgroups (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 09:43:03 +0000 (11:43 +0200)]
getdtablesize: Move AC_LIBOBJ invocations to module description.
* m4/getdtablesize.m4 (gl_FUNC_GETDTABLESIZE): Move AC_LIBOBJ
invocation from here...
* modules/getdtablesize (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 09:41:07 +0000 (11:41 +0200)]
getdomainname: Move AC_LIBOBJ invocations to module description.
* m4/getdomainname.m4 (gl_FUNC_GETDOMAINNAME): Move AC_LIBOBJ and
gl_PREREQ_GETDOMAINNAME invocations from here...
* modules/getdomainname (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 09:38:44 +0000 (11:38 +0200)]
getline: Move AC_LIBOBJ invocations to module description.
* m4/getline.m4 (gl_FUNC_GETLINE): Move AC_LIBOBJ and gl_PREREQ_GETLINE
invocations from here...
* modules/getline (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 09:36:44 +0000 (11:36 +0200)]
getline: Simplify.
* m4/getline.m4 (gl_PREREQ_GETLINE): Don't invoke gl_FUNC_GETDELIM.
It's already handled through the module dependency.
Bruno Haible [Sun, 8 May 2011 09:32:02 +0000 (11:32 +0200)]
getdelim: Move AC_LIBOBJ invocations to module description.
* m4/getdelim.m4 (gl_FUNC_GETDELIM): Set HAVE_GETDELIM. Move AC_LIBOBJ
and gl_PREREQ_GETDELIM invocations from here...
* modules/getdelim (configure.ac): ... to here.
(Depends-on): Fix condition.
Bruno Haible [Sun, 8 May 2011 09:25:18 +0000 (11:25 +0200)]
getcwd: Move AC_LIBOBJ invocations to module description.
* m4/getcwd.m4 (gl_FUNC_GETCWD): Move AC_LIBOBJ and gl_PREREQ_GETCWD
invocations from here...
* modules/getcwd (configure.ac): ... to here.
Bruno Haible [Sun, 8 May 2011 09:22:53 +0000 (11:22 +0200)]
getcwd-lgpl: Move AC_LIBOBJ invocations to module description.
* m4/getcwd.m4 (gl_FUNC_GETCWD_LGPL): Move AC_LIBOBJ invocation from
here...
* modules/getcwd-lgpl (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 12:11:41 +0000 (14:11 +0200)]
crypto/gc: Move AC_LIBOBJ invocations to module description.
* m4/gc.m4 (gl_GC): Move AC_LIBOBJ invocations from here...
* modules/crypto/gc (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:48:53 +0000 (13:48 +0200)]
fwriting: Move AC_LIBOBJ invocations to module description.
* m4/fwriting.m4 (gl_FUNC_FWRITINT): Move AC_LIBOBJ invocation from
here...
* modules/fwriting (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:47:27 +0000 (13:47 +0200)]
fwritable: Move AC_LIBOBJ invocations to module description.
* m4/fwritable.m4 (gl_FUNC_FWRITABLE): Move AC_LIBOBJ invocation from
here...
* modules/fwritable (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:45:40 +0000 (13:45 +0200)]
futimens: Move AC_LIBOBJ invocations to module description.
* m4/futimens.m4 (gl_FUNC_FUTIMENS): Move AC_LIBOBJ invocations from
here...
* modules/futimens (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:42:47 +0000 (13:42 +0200)]
ftruncate: Move AC_LIBOBJ invocations to module description.
* m4/ftruncate.m4 (gl_FUNC_FTRUNCATE): Move AC_LIBOBJ and
gl_PREREQ_FTRUNCATE invocations from here...
* modules/ftruncate (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:34:55 +0000 (13:34 +0200)]
fsync: Move AC_LIBOBJ invocations to module description.
* m4/fsync.m4 (gl_FUNC_FSYNC): Move AC_LIBOBJ and gl_PREREQ_FSYNC
invocations from here...
* modules/fsync (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:32:46 +0000 (13:32 +0200)]
fsusage: Move AC_LIBOBJ invocations to module description.
* m4/fsusage.m4 (gl_FUNC_FREOPEN): Move AC_LIBOBJ and
gl_PREREQ_FSUSAGE_EXTRA invocations from here...
* modules/fsusage (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 10:48:09 +0000 (12:48 +0200)]
freopen: Move AC_LIBOBJ invocations to module description.
* m4/freopen.m4 (gl_FUNC_FREOPEN): Move AC_LIBOBJ and gl_PREREQ_FREOPEN
invocations from here...
* modules/freopen (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 10:46:04 +0000 (12:46 +0200)]
free: Move AC_LIBOBJ invocations to module description.
* m4/free.m4 (gl_FUNC_FREE): Move AC_LIBOBJ and missing gl_PREREQ_FREE
invocations from here...
* modules/free (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 10:31:11 +0000 (12:31 +0200)]
freadable: Move AC_LIBOBJ invocations to module description.
* m4/freadable.m4 (gl_FUNC_FREADABLE): Move AC_LIBOBJ invocation from
here...
* modules/freadable (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 10:28:30 +0000 (12:28 +0200)]
fpurge: Move AC_LIBOBJ invocations to module description.
* m4/fpurge.m4 (gl_FUNC_FPURGE): Set HAVE_FPURGE. Move AC_LIBOBJ
invocations from here...
* modules/fpurge (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 10:23:53 +0000 (12:23 +0200)]
fpending: Move AC_LIBOBJ invocations to module description.
* m4/fpending.m4 (gl_PREREQ_FPENDING): New macro, extracted from
gl_FUNC_FPENDING.
(gl_FUNC_FPENDING): Move AC_LIBOBJ and gl_PREREQ_FPENDING
invocations from here...
* modules/fpending (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 10:15:25 +0000 (12:15 +0200)]
fopen: Move AC_LIBOBJ invocations to module description.
* m4/fopen.m4 (gl_FUNC_FOPEN): Move AC_LIBOBJ and gl_PREREQ_FOPEN
invocations from here...
* modules/fopen (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 10:13:04 +0000 (12:13 +0200)]
fnmatch, fnmatch-gnu: Move AC_LIBOBJ invocations to module description.
* m4/fnmatch.m4 (gl_PREREQ_FNMATCH): New macro, extracted from
gl_FUNC_FNMATCH_POSIX.
(gl_FUNC_FNMATCH_POSIX): Move AC_LIBOBJ and gl_PREREQ_FNMATCH
invocations from here...
* modules/fnmatch (configure.ac): ... to here.
* modules/fnmatch-gnu (configure.ac): ... and here.
Bruno Haible [Sat, 7 May 2011 10:04:35 +0000 (12:04 +0200)]
flock: Move AC_LIBOBJ invocations to module description.
* m4/flock.m4 (gl_FUNC_FLOCK): Move AC_LIBOBJ and gl_PREREQ_FLOCK
invocations from here...
* modules/flock (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 10:02:05 +0000 (12:02 +0200)]
fileblocks: Move AC_LIBOBJ invocations to module description.
* m4/fileblocks.m4 (gl_FILEBLOCKS): Move AC_LIBOBJ and
gl_PREREQ_FILEBLOCKS invocations from here...
* modules/fileblocks (configure.ac): ... to here.
Bruno Haible [Fri, 6 May 2011 11:21:22 +0000 (13:21 +0200)]
fflush: Move AC_LIBOBJ invocations to module description.
* m4/fflush.m4 (gl_REPLACE_FFLUSH): Remove macro.
(gl_FUNC_FFLUSH): Inline it here. Move AC_LIBOBJ and gl_PREREQ_FFLUSH
invocations from here...
* modules/fflush (configure.ac): ... to here.
Bruno Haible [Fri, 6 May 2011 11:17:26 +0000 (13:17 +0200)]
fdopendir: Move AC_LIBOBJ invocations to module description.
* m4/fdopendir.m4 (gl_FUNC_FDOPENDIR): Move AC_LIBOBJ invocations from
here...
* modules/fdopendir (configure.ac): ... to here.
(Depends-on): Improve conditions.
Bruno Haible [Fri, 6 May 2011 10:58:23 +0000 (12:58 +0200)]
_Exit: Move AC_LIBOBJ invocations to module description.
* m4/_Exit.m4 (gl_FUNC__EXIT): Move AC_LIBOBJ and gl_PREREQ__EXIT
invocations from here...
* modules/_Exit (configure.ac): ... to here.
Bruno Haible [Sat, 21 May 2011 10:40:54 +0000 (12:40 +0200)]
euidaccess: Respect rules for use of AC_LIBOBJ.
* m4/euidaccess.m4 (gl_FUNC_EUIDACCESS): Call AC_CHECK_FUNCS instead of
AC_REPLACE_FUNCS. Move AC_LIBOBJ and gl_PREREQ_EUIDACCESS invocations
from here...
* modules/euidaccess (configure.ac): ... to here.
Bruno Haible [Fri, 6 May 2011 10:55:33 +0000 (12:55 +0200)]
error: Move AC_LIBOBJ invocations to module description.
* m4/error.m4 (gl_ERROR): Inline AC_FUNC_ERROR_AT_LINE. Remove
AC_LIBSOURCES invocation. Move AC_LIBOBJ and gl_PREREQ_ERROR
invocations from here...
* modules/error (configure.ac): ... to here.
Bruno Haible [Fri, 6 May 2011 10:46:34 +0000 (12:46 +0200)]
duplocale: Move AC_LIBOBJ invocations to module description.
* m4/duplocale.m4 (gl_FUNC_DUPLOCALE): Move AC_LIBOBJ and
gl_PREREQ_DUPLOCALE invocations from here...
* modules/duplocale (configure.ac): ... to here.
Bruno Haible [Fri, 6 May 2011 01:46:57 +0000 (03:46 +0200)]
dirfd: Move AC_LIBOBJ invocations to module description.
* m4/dirfd.m4 (gl_PREREQ_DIRFD): New macro, extracted from
gl_FUNC_DIRFD.
(gl_FUNC_DIRFD): Move AC_LIBOBJ and gl_PREREQ_DIRFD invocations from
here...
* modules/dirfd (configure.ac): ... to here.
(Depends-on): Fix condition.
Bruno Haible [Fri, 6 May 2011 01:27:03 +0000 (03:27 +0200)]
chown: Respect rules for use of AC_LIBOBJ.
* m4/chown.m4 (gl_FUNC_CHOWN): Move AC_LIBOBJ invocations from here...
* modules/chown (configure.ac): ... to here.
Bruno Haible [Thu, 5 May 2011 23:47:42 +0000 (01:47 +0200)]
chdir-long: Move AC_LIBOBJ invocations to module description.
* m4/chdir-long.m4 (gl_FUNC_CHDIR_LONG): Move AC_LIBOBJ and
gl_PREREQ_CHDIR_LONG invocations from here...
* modules/chdir-long (configure.ac): ... to here.
Bruno Haible [Thu, 5 May 2011 23:29:37 +0000 (01:29 +0200)]
canonicalize-lgpl: Move AC_LIBOBJ invocations to module description.
* m4/canonicalize.m4 (gl_CANONICALIZE_LGPL): Move AC_LIBOBJ invocation
from here...
* modules/canonicalize-lgpl (configure.ac): ... to here.
Bruno Haible [Thu, 5 May 2011 23:15:44 +0000 (01:15 +0200)]
calloc-posix, calloc-gnu: Move AC_LIBOBJs to module description.
* m4/calloc.m4 (gl_REPLACE_CALLOC): Remove macro.
(gl_FUNC_CALLOC_GNU, gl_FUNC_CALLOC_POSIX): Instead, just set
REPLACE_CALLOC.
* modules/calloc-posix (configure.ac): Invoke AC_LIBOBJ here.
* modules/calloc-gnu (configure.ac): Likewise.
Bruno Haible [Thu, 5 May 2011 23:09:53 +0000 (01:09 +0200)]
btowc: Move AC_LIBOBJ invocations to module description.
* m4/btowc.m4 (gl_FUNC_BTOWC): Move AC_LIBOBJ and gl_PREREQ_BTOWC
invocations from here...
* modules/btowc (configure.ac): ... to here.
Bruno Haible [Sat, 21 May 2011 10:33:31 +0000 (12:33 +0200)]
atexit: Move AC_LIBOBJ invocations to module description.
* m4/atexit.m4 (gl_FUNC_ATEXIT): Call AC_CHECK_FUNCS instead of
AC_REPLACE_FUNCS. Move AC_LIBOBJ and gl_PREREQ_ATEXIT invocations from
here...
* modules/atexit (configure.ac): ... to here.
Bruno Haible [Thu, 5 May 2011 23:06:05 +0000 (01:06 +0200)]
atoll: Move AC_LIBOBJ invocations to module description.
* m4/atoll.m4 (gl_FUNC_ATOLL): Move AC_LIBOBJ and gl_PREREQ_ATOLL
invocations from here...
* modules/atoll (configure.ac): ... to here.
Bruno Haible [Thu, 5 May 2011 23:03:00 +0000 (01:03 +0200)]
argz: Move AC_LIBOBJ invocations to module description.
* m4/argz.m4 (gl_FUNC_ARGZ): Move AC_LIBOBJ invocation from here...
* modules/argz (configure.ac): ... to here.
Bruno Haible [Thu, 5 May 2011 22:59:02 +0000 (00:59 +0200)]
alphasort: Move AC_LIBOBJ invocations to module description.
* m4/alphasort.m4 (gl_FUNC_ALPHASORT): Move AC_LIBOBJ and
gl_PREREQ_ALPHASORT invocations from here...
* modules/alphasort (configure.ac): ... to here.
Paul Eggert [Wed, 15 Jun 2011 18:15:37 +0000 (11:15 -0700)]
verify: new macro verify_expr; verify_true deprecated
* NEWS: Mention this.
* doc/verify.texi (Compile-time Assertions): Document this.
* lib/verify.h (verify_true): Deprecate.
(verify_expr): New macro.
* tests/test-verify.c (function): Test verify_expr.
Jim Meyering [Tue, 14 Jun 2011 13:33:23 +0000 (15:33 +0200)]
init.sh: give more portable redirection-related advice in a comment
* tests/init.sh (stderr_fileno_): Update the advice in comments.
See http://thread.gmane.org/gmane.comp.gnu.coreutils.bugs/22488
for lots of discussion. Stefano Lattarini suggested the solution
of putting "9>&2" after the command. Reported by Bruno Haible.
Paul Eggert [Mon, 13 Jun 2011 19:29:30 +0000 (12:29 -0700)]
Fix ChangeLog typo in my previous commit.
Bruno Haible [Mon, 13 Jun 2011 18:05:58 +0000 (20:05 +0200)]
locale-zh: Reject zh_CN.GB18030 locale on Solaris 8.
* m4/locale-zh.m4 (gt_LOCALE_ZH_CN): On Solaris 8, set LOCALE_ZH_CN to
'none'.
Paul Eggert [Mon, 13 Jun 2011 16:40:58 +0000 (09:40 -0700)]
ftoastr: use strtof only if HAVE_STRTOF
This is needed on HP-UX 11.11 with GCC 4.24; see Bruno Haible's report
<http://lists.gnu.org/archive/html/bug-gnulib/2011-06/msg00154.html>.
* lib/ftoastr.c (STRTOF) [LENGTH == 1]: Use strtof only if HAVE_STRTOF.
* modules/ftoastr (configure.ac): Check for strtof.
Bruno Haible [Mon, 13 Jun 2011 15:44:26 +0000 (17:44 +0200)]
gnulib-tool: Addendum to 2011-06-08 commit.
* gnulib-tool (func_emit_lib_Makefile_am): If options --makefile-name
and --witness-c-macro have been given, augment AM_CPPFLAGS.
Bruno Haible [Mon, 13 Jun 2011 15:36:39 +0000 (17:36 +0200)]
fseeko: Provide a non-inline replacement of fseek().
* lib/stdio.in.h (fseek): Don't provide if module 'fseek' is not used.
* modules/fseeko (Depends-on): Add fseek.
* modules/fseek (License): Change to LGPLv2+.
Bruno Haible [Mon, 13 Jun 2011 15:33:59 +0000 (17:33 +0200)]
ftello: Provide a non-inline replacement of ftell().
* lib/stdio.in.h (ftell): Don't provide if module 'ftell' is not used.
* m4/ftell.m4 (gl_FUNC_FTELL): Replace ftell also if the system does
not have ftello() (such as on mingw).
* modules/ftello (Depends-on): Add ftell.
* modules/ftell (License): Change to LGPLv2+.
Bruno Haible [Sat, 7 May 2011 11:40:26 +0000 (13:40 +0200)]
ftell: Move AC_LIBOBJ invocations to module description.
* m4/ftell.m4 (gl_FUNC_FTELL): Move AC_LIBOBJ invocation from here...
* modules/ftell (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:37:56 +0000 (13:37 +0200)]
ftello: Respect rules for use of AC_LIBOBJ.
* m4/ftello.m4 (gl_REPLACE_FTELLO): Remove macro.
(gl_FUNC_FTELLO): Inline it here. Move AC_LIBOBJ invocation from
here...
* modules/ftello (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:30:25 +0000 (13:30 +0200)]
fseeko: Simplify.
* m4/fseeko.m4 (gl_HAVE_FSEEKO): Remove macro.
(gl_FUNC_FSEEKO): Inline it here.
Bruno Haible [Sat, 7 May 2011 11:26:48 +0000 (13:26 +0200)]
fseek: Move AC_LIBOBJ invocations to module description.
* m4/fseek.m4 (gl_REPLACE_FSEEK): Remove macro.
(gl_FUNC_FSEEK): Inline it here. Move AC_LIBOBJ invocation from here...
* modules/fseek (configure.ac): ... to here.
Bruno Haible [Sat, 7 May 2011 11:23:50 +0000 (13:23 +0200)]
fseek: Respect rules for use of AC_LIBOBJ.
* m4/fseeko.m4 (gl_FUNC_FSEEKO): Move gl_REPLACE_FSEEK invocation from
here...
* m4/fseek.m4 (gl_FUNC_FSEEK): ... to here.
Bruno Haible [Sat, 7 May 2011 11:18:23 +0000 (13:18 +0200)]
fseeko: Respect rules for use of AC_LIBOBJ.
* m4/fseeko.m4 (gl_REPLACE_FSEEKO): Remove macro.
(gl_FUNC_FSEEKO): Inline it here. Move AC_LIBOBJ invocation from
here...
* modules/fseeko (configure.ac): ... to here.
Bruno Haible [Mon, 13 Jun 2011 10:29:46 +0000 (12:29 +0200)]
gnulib-tool: Allow comments in the 'Depends-on' section.
* doc/gnulib.texi (Module description): Mention comment syntax in the
Depends-on section.
* gnulib-tool (func_get_dependencies): Filter out comment lines.
Bruno Haible [Mon, 13 Jun 2011 09:49:16 +0000 (11:49 +0200)]
Correct last ChangeLog entry.
Bruno Haible [Mon, 13 Jun 2011 09:19:42 +0000 (11:19 +0200)]
file-set.h: guard __attibute__ use, now that it's not always defined
* lib/file-set.h (record_file): Use __attribute__ only with compiler
versions that support it. This fixes a coreutils build failure with
/bin/cc on HP-UX 11.31.
Bruno Haible [Mon, 13 Jun 2011 00:11:03 +0000 (02:11 +0200)]
acl: Add support for HP-UX >= 11.11 JFS ACLs.
* doc/acl-resources.txt: Add info about the ACL APIs on HP-UX.
* m4/acl.m4 (gl_FUNC_ACL): Also test for HP-UX 11.11 API.
* lib/acl-internal.h [HP-UX 11.11]: Include <aclv.h>.
(acl, aclsort): New declarations.
(aclv_nontrivial): New declaration.
* lib/file-has-acl.c (aclv_nontrivial) [HP-UX 11.11]: New function.
(file_has_acl): Read also the second kind of HP-UX ACLs.
* lib/set-mode-acl.c (qset_acl) [HP-UX 11.11]: Try to set the second
kind of HP-UX ACLs if the first kind fails.
* lib/copy-acl.c (qcopy_acl) [HP-UX 11.11]: Read and set also the
second kind of HP-UX ACLs.
* tests/test-sameacls.c [HP-UX 11.11]: Include <aclv.h>.
(main) [HP-UX 11.11]: Test also whether the second kind of HP-UX ACLs
agree.
* tests/test-file-has-acl.sh (acl_flavor) [HP-UX 11.11]: Set to
hpuxjfs.
Handle hpuxjfs.
* tests/test-set-mode-acl.sh (acl_flavor) [HP-UX 11.11]: Set to
hpuxjfs.
Handle hpuxjfs.
* tests/test-copy-acl.sh (acl_flavor) [HP-UX 11.11]: Set to hpuxjfs.
(func_test_same_acls): Use both lsacl and getacl.
Handle hpuxjfs.
* tests/test-copy-file.sh (acl_flavor) [HP-UX 11.11]: Set to hpuxjfs.
(func_test_same_acls): Use both lsacl and getacl.
Handle hpuxjfs.
Bruno Haible [Sun, 12 Jun 2011 23:17:20 +0000 (01:17 +0200)]
acl: Complete the 2010-08-10 fix.
* lib/file-has-acl.c (file_has_acl) [HP-UX]: Also test against ENOTSUP.
* lib/set-mode-acl.c (qset_acl) [HP-UX]: Likewise.
* lib/copy-acl.c (qcopy_acl) [HP-UX]: Test for the errno values
explicitly.
* tests/test-sameacls.c (main) [HP-UX]: Also test against ENOTSUP.
Reported in <http://debbugs.gnu.org/db/60/6053.html>.
Bruno Haible [Sun, 12 Jun 2011 12:46:34 +0000 (14:46 +0200)]
spawn-pipe tests: Comments.
* tests/test-spawn-pipe-child.c (main): Update comment.
Reported by James Youngman <jay@gnu.org>.
James Youngman [Sat, 11 Jun 2011 00:15:39 +0000 (01:15 +0100)]
New module 'stat-size'.
* modules/stat-size: New module. Provides macros for accessing
file size information in instances of struct stat. Depends on the
fileblocks module because it calls st_blocks.
* lib/stat-size.h: New file, adapted from coreutils' system.h.
* doc/gnulib.texi: Include stat-size.texi.
* doc/stat-size.texi: Documentation for this module.
* m4/stat-size.m4: New file; defines gl_STAT_SIZE.
* m4/fileblocks.m4: Mention that stat-size depends on the call to
AC_STRUCT_ST_BLOCKS.
Bruno Haible [Thu, 9 Jun 2011 10:40:44 +0000 (12:40 +0200)]
thread: Support pthreads-win32.
* lib/glthread/thread.h (gl_thread_self): Define differently on
pthreads-win32.
(gl_null_thread): New declaration.
(gl_thread_self_pointer): New macro.
* lib/glthread/thread.c (gl_null_thread): New constant.
* tests/test-lock.c: Use gl_thread_self_pointer instead of
gl_thread_self.
* tests/test-tls.c: Likewise.
Suggested by Paul Eggert. Reported by Eric Blake.
Bruno Haible [Thu, 9 Jun 2011 10:55:09 +0000 (12:55 +0200)]
thread: Fix confusion between NULL and 0.
* lib/glthread/thread.h (gl_thread_self): Use NULL and 0 appropriately.
Reported by Paul Eggert.
Bruno Haible [Thu, 9 Jun 2011 09:37:58 +0000 (11:37 +0200)]
spawn-pipe tests: Avoid test failure on HP-UX 11.
* tests/test-spawn-pipe-child.c (main) [HP-UX]: Don't assert that fd 2
is closed.
Bruno Haible [Thu, 9 Jun 2011 09:35:25 +0000 (11:35 +0200)]
acl tests: Fix compilation error on HP-UX 11.
* tests/test-sameacls.c: Include <sys/acl.h> also on HP-UX.
Bruno Haible [Thu, 9 Jun 2011 09:21:23 +0000 (11:21 +0200)]
rmdir: Avoid test failure on HP-UX 10.20.
* tests/test-rmdir.h (test_rmdir_func): Accept ENOTEMPTY error, like
EEXIST.
Eric Blake [Wed, 8 Jun 2011 14:34:21 +0000 (08:34 -0600)]
perror: fix test on mingw
test-perror2 was tripping up on a known mingw dup2 pitfall.
* modules/perror-tests (Depends-on): Add dup2.
Signed-off-by: Eric Blake <eblake@redhat.com>
Eric Blake [Wed, 8 Jun 2011 02:49:04 +0000 (20:49 -0600)]
strerror_r-posix: fix on MacOS
MacOS X 10.5 strerror(0) is "Unknown error: 0", which is not distinguished
from "Unknown error: -1" for out-of-range. Worse, strerror_r(0,,)
is "Undefined error: 0", although strerror_r for all other out-of-range
values matches strerror.
* m4/strerror.m4 (gl_FUNC_STRERROR): Flush out MacOS bug.
* m4/strerror_r.m4 (gl_FUNC_STRERROR_R_WORKS): Likewise, and fix
logic bug.
* lib/strerror_r.c (strerror_r): Fix the bug.
* lib/strerror.c (strerror): Likewise.
* doc/posix-functions/strerror_r.texi (strerror_r): Document the
problem.
* doc/posix-functions/strerror.texi (strerror): Likewise.
* doc/posix-functions/perror.texi (perror): Likewise.
* tests/test-strerror.c (main): Enhance test.
* tests/test-strerror_r.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Bruno Haible [Wed, 8 Jun 2011 11:23:56 +0000 (13:23 +0200)]
gnulib-tool: Better isolation between different gnulib-tool invocations.
* gnulib-tool: New option --witness-c-macro.
(witness_c_macro): New variable.
(func_emit_lib_Makefile_am): If --witness-c-macro was specified, let
AM_CPPFLAGS define it as a C macro.
(func_emit_tests_Makefile_am): Likewise.
(func_import): Store witness_c_macro setting in gnulib-cache.m4 and
read it from there.
* m4/gnulib-common.m4 (gl_MODULE_INDICATOR_CONDITION): Define through
m4_define, not AC_DEFUN.
(gl_MODULE_INDICATOR_SET_VARIABLE_AUX,
gl_MODULE_INDICATOR_SET_VARIABLE_AUX_OR): New macros.
(gl_MODULE_INDICATOR_SET_VARIABLE): Use them.
* modules/arpa_inet (Makefile.am): Use sed expression s/.../.../, not
s|...|...|, to substitute the values of the GNULIB_* module indicator
variables.
* modules/dirent (Makefile.am): Likewise.
* modules/fcntl-h (Makefile.am): Likewise.
* modules/iconv-h (Makefile.am): Likewise.
* modules/langinfo (Makefile.am): Likewise.
* modules/locale (Makefile.am): Likewise.
* modules/math (Makefile.am): Likewise.
* modules/netdb (Makefile.am): Likewise.
* modules/poll-h (Makefile.am): Likewise.
* modules/pty (Makefile.am): Likewise.
* modules/search (Makefile.am): Likewise.
* modules/signal (Makefile.am): Likewise.
* modules/spawn (Makefile.am): Likewise.
* modules/stdio (Makefile.am): Likewise.
* modules/stdlib (Makefile.am): Likewise.
* modules/string (Makefile.am): Likewise.
* modules/sys_ioctl (Makefile.am): Likewise.
* modules/sys_select (Makefile.am): Likewise.
* modules/sys_socket (Makefile.am): Likewise.
* modules/sys_stat (Makefile.am): Likewise.
* modules/sys_times (Makefile.am): Likewise.
* modules/sys_utsname (Makefile.am): Likewise.
* modules/sys_wait (Makefile.am): Likewise.
* modules/termios (Makefile.am): Likewise.
* modules/time (Makefile.am): Likewise.
* modules/unistd (Makefile.am): Likewise.
* modules/wchar (Makefile.am): Likewise.
Eric Blake [Wed, 8 Jun 2011 11:12:15 +0000 (05:12 -0600)]
strerror: simplify replacement
Only strerror-override depends on winsock2.h; our strerror.c file
does not. This also fixes mingw strerror_r-posix use of winsock2.h
via strerror-override.
Since we assume C89 which guarantees a declaration for sterror, we
don't need to repeat that check.
* m4/strerror.m4 (gl_PREREQ_STRERROR): Delete.
* modules/strerror (configure.ac): No prereqs needed here...
* modules/strerror-override (configure.ac): ...but this needs it.
(Files): Add file for needed prereq macro.
Signed-off-by: Eric Blake <eblake@redhat.com>
Bruno Haible [Wed, 8 Jun 2011 10:27:31 +0000 (12:27 +0200)]
strerror_r-posix: Tweaks.
* m4/strerror.m4 (gl_FUNC_STRERROR): Omit the code that tests
gl_cv_func_strerror_r_works if gl_FUNC_STRERROR_R_WORKS is not present.
* m4/strerror_r.m4 (gl_FUNC_STRERROR_R_WORKS): Fix AC_CACHE_CHECK
message. Move gl_HEADER_STRING_H_DEFAULTS invocation from here...
(gl_FUNC_STRERROR_R): ... to here.
(gl_PREREQ_STRERROR_R): Test for __xpg_strerror_r.
Eric Blake [Wed, 8 Jun 2011 03:09:01 +0000 (21:09 -0600)]
perror: document fixed bugs
* doc/posix-functions/perror.texi (perror): Document recent
patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Paul Eggert [Tue, 7 Jun 2011 23:01:33 +0000 (16:01 -0700)]
stat-time: get_stat_birthtime failure is better-defined
* lib/stat-time.h (get_stat_birthtime): If the time is not available,
return a timestamp whose tv_sec and tv_nsec values are both -1.
Previously, the spec said only that the tv_nsec value was negative.
This upward-compatible change simplifies GNU tar a bit.
Eric Blake [Mon, 6 Jun 2011 23:59:01 +0000 (17:59 -0600)]
strerror_r-posix: work around cygwin 1.7.9
Cygwin __xpg_strerror_r clobbers strerror, until cygwin 1.7.10; in
this case, we must replace strerror, but there was nothing in
strerror.m4 finding fault with cygwin's native strerror. Solve
this by splitting strerror_r.m4 into two parts, one for probing
for the strerror_r bug, and one for replacing strerror_r based
on the presence of bugs unrelated to signature issues; that way,
the 'strerror' module in isolation will not replace strerror, but
if strerror_r is in use for any other reason, then the two use
separate buffers.
Note that cygwin's strerror is thread-safe while the gnulib
replacement is not; but this is no worse than any other
platform where strerror is not thread-safe; in a single-threaded
program, the difference is not observable, and in a multi-threaded
program, you really shouldn't be using strerror in the first place.
Also note that this ends up replacing glibc 2.13 strerror as it
deems __xpg_strerror_r broken on that platform, which isn't
technically necessary for strerror, but doesn't hurt too much.
Meanwhile, glibc 2.14 fixed __xpg_strerror_r, and strerror is not
replaced in that scenario.
* m4/strerror_r.m4 (gl_FUNC_STRERROR_R): Split...
(gl_FUNC_STRERROR_R_WORKS): ...into new macro, to detect Cygwin
bug without replacing strerror_r.
* m4/strerror.m4 (gl_FUNC_STRERROR): Replace strerror if
strerror_r is buggy, but without requiring strerror_r compilation.
* doc/posix-functions/strerror_r.texi (strerror_r): Fix docs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Eric Blake [Tue, 7 Jun 2011 21:41:20 +0000 (15:41 -0600)]
test-perror: relax test to ignore cygwin bug
glibc was not the only platform where fprintf(fopen(,"r"))
fails to detect errors; cygwin 1.7.9 is another culprit
(although it will be fixed for 1.7.10), and I suspect that
several other platforms were failing perror2 for the same
reason.
At this point, there are so many functions affected, and
the way to avoid the bug is easy enough (don't pass bogus
streams to output-producing functions), that I'm not worried
about fixing things other than to document them.
* tests/test-perror2.c (main): Relax test on requiring detection
of stream errors, and use unbuffered stream.
* doc/posix-functions/dprintf.texi (dprintf): Document bug.
* doc/posix-functions/fprintf.texi (fprintf): Likewise.
* doc/posix-functions/fputc.texi (fputc): Likewise.
* doc/posix-functions/fputs.texi (fputs): Likewise.
* doc/posix-functions/fputws.texi (fputws): Likewise.
* doc/posix-functions/fwprintf.texi (fwprintf): Likewise.
* doc/posix-functions/fwrite.texi (fwrite): Likewise.
* doc/posix-functions/getopt.texi (getopt): Likewise.
* doc/posix-functions/perror.texi (perror): Likewise.
* doc/posix-functions/printf.texi (printf): Likewise.
* doc/posix-functions/psiginfo.texi (psiginfo): Likewise.
* doc/posix-functions/psignal.texi (psignal): Likewise.
* doc/posix-functions/putc.texi (putc): Likewise.
* doc/posix-functions/putc_unlocked.texi (putc_unlocked):
Likewise.
* doc/posix-functions/putchar.texi (putchar): Likewise.
* doc/posix-functions/putchar_unlocked.texi (putchar_unlocked):
Likewise.
* doc/posix-functions/puts.texi (puts): Likewise.
* doc/posix-functions/putwc.texi (putwc): Likewise.
* doc/posix-functions/putwchar.texi (putwchar): Likewise.
* doc/posix-functions/vdprintf.texi (vdprintf): Likewise.
* doc/posix-functions/vfprintf.texi (vfprintf): Likewise.
* doc/posix-functions/vfwprintf.texi (vfwprintf): Likewise.
* doc/posix-functions/vprintf.texi (vprintf): Likewise.
* doc/posix-functions/vwprintf.texi (vwprintf): Likewise.
* doc/posix-functions/wordexp.texi (wordexp): Likewise.
* doc/posix-functions/wprintf.texi (wprintf): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Bruno Haible [Sun, 22 May 2011 11:19:32 +0000 (13:19 +0200)]
strerror: Move AC_LIBOBJ invocations to module description.
* m4/strerror.m4 (gl_FUNC_STRERROR): Move AC_LIBOBJ and
gl_PREREQ_STRERROR invocations from here...
* modules/strerror (configure.ac): ... to here.
Bruno Haible [Sat, 21 May 2011 14:51:40 +0000 (16:51 +0200)]
perror: Use common idiom.
* modules/perror (configure.ac): Reorder statements.
Karl Berry [Tue, 7 Jun 2011 22:41:22 +0000 (15:41 -0700)]
autoupdate
Stefano Lattarini [Tue, 7 Jun 2011 11:55:57 +0000 (13:55 +0200)]
tests: fix usage message in 'mktempd_'
* tests/init.sh (mktempd_): In the usage message, use literal
'mktempd_', not '$ME' (which is even undefined), as the name of
the subroutine.
Stefano Lattarini [Tue, 7 Jun 2011 11:27:00 +0000 (13:27 +0200)]
tests init: new function 'fatal_', for hard errors
Before this patch, the only way offered by tests/init.sh to
properly signal a hard error was the `framework_failure_'
function. But the error message issued by that function,
as its name would suggest, refers to a set-up failure in the
testsuite, while hard errors can obviously also be due to
other reasons. The best way to fix this inconsistency is to
introduce a new function with a more general error message.
* tests/init.sh (fatal_): New function.
Karl Berry [Tue, 7 Jun 2011 12:53:38 +0000 (05:53 -0700)]
doc/lgpl-2.1.texi
projects / pspp / log