From: Ben Pfaff Date: Wed, 9 Feb 2011 00:43:40 +0000 (-0800) Subject: xenserver: Introduce "force-reload-kmod" to reload kernel module. X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=commitdiff_plain;h=f7a122fc2457f805fd0906f4368ea42d2ea55584;p=openvswitch xenserver: Introduce "force-reload-kmod" to reload kernel module. Running "service openvswitch force-reload-kmod" will now save the kernel configuration state of Open vSwitch interfaces, stop the vswitch, unload the kernel module, reload the kernel module, restart the vswitch, and restore kernel configuration state. It is a reasonably safe way to upgrade or downgrade the Open vSwitch kernel module on a running system. Signed-off-by: Ben Pfaff --- diff --git a/utilities/automake.mk b/utilities/automake.mk index 7aa5800d..36b2b91b 100644 --- a/utilities/automake.mk +++ b/utilities/automake.mk @@ -31,6 +31,7 @@ EXTRA_DIST += \ utilities/ovs-pki-cgi.in \ utilities/ovs-pki.8.in \ utilities/ovs-pki.in \ + utilities/ovs-save \ utilities/ovs-tcpundump.1.in \ utilities/ovs-tcpundump.in \ utilities/ovs-vlan-test.in \ diff --git a/utilities/ovs-save b/utilities/ovs-save new file mode 100755 index 00000000..b2c726eb --- /dev/null +++ b/utilities/ovs-save @@ -0,0 +1,157 @@ +#! /bin/sh + +# Copyright (c) 2011 Nicira Networks, Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at: +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +if test "X$1" = X--help; then + cat <&2 + exit 1 +fi + +if test "$#" = 0; then + echo "# $0: no parameters given (use \"$0 --help\" for help)" +fi + +devs=$* +for dev in $devs; do + state=`ip link show $dev` || continue + + echo "# $dev" + # Link state (Ethernet addresses, up/down, ...) + linkcmd= + case $state in + *"state UP"* | *[,\<]"UP"[,\>]* ) + linkcmd="$linkcmd up" + ;; + *"state DOWN"*) + linkcmd="$linkcmd down" + ;; + esac + if expr "$state" : '.*\bdynamic\b' > /dev/null; then + linkcmd="$linkcmd dynamic" + fi + if qlen=`expr "$state" : '.*qlen \([0-9]+\)'`; then + linkcmd="$linkcmd txqueuelen $qlen" + fi + if hwaddr=`expr "$state" : '.*link/ether \([^ ]*\)'`; then + linkcmd="$linkcmd address $hwaddr" + fi + if brd=`expr "$state" : '.*brd \([^ ]*\)'`; then + linkcmd="$linkcmd broadcast $brd" + fi + if mtu=`expr "$state" : '.*mtu \([0-9]+\)'`; then + linkcmd="$linkcmd mtu $mtu" + fi + if test -n "$linkcmd"; then + echo ip link set $dev down # Required to change hwaddr. + echo ip link set $dev $linkcmd + fi + + # IP addresses (including IPv6). + echo "ip addr flush $dev 2>/dev/null" # Suppresses "Nothing to flush". + ip addr show dev $dev | while read addr; do + set -- $addr + + # Check and trim family. + family=$1 + shift + case $family in + inet | inet6) ;; + *) continue ;; + esac + + # Trim device off the end--"ip" insists on having "dev" precede it. + addrcmd= + while test $# != 0; do + case $1 in + dynamic) + # Omit kernel-maintained route. + continue 2 + ;; + scope) + if test "$2" = link; then + # Omit route derived from IP address, e.g. + # 172.16.0.0/16 derived from 172.16.12.34. + continue 2 + fi + ;; + "$dev") + # Omit because "ip" wants "dev" keyword in front. + shift + continue + ;; + esac + addrcmd="$addrcmd $1" + shift + done + if test "$1" != "$dev"; then + addrcmd="$addrcmd $1" + fi + + echo ip -f $family addr add $addrcmd dev $dev + done + + # Routes. + echo "ip route flush dev $dev proto boot 2>/dev/null" # Suppresses "Nothing to flush". + ip route show dev $dev | while read route; do + # "proto kernel" routes are installed by the kernel automatically. + case $route in + *" proto kernel "*) continue ;; + esac + + echo "ip route add $route dev $dev" + done + + echo +done + +if missing_program iptables-save; then + echo "# iptables-save not found in $PATH, not saving iptables state" +else + echo "# global" + echo "iptables-restore <<'EOF'" + iptables-save + echo "EOF" +fi + +exit 0 diff --git a/xenserver/etc_init.d_openvswitch b/xenserver/etc_init.d_openvswitch index a9e51de2..a08a95db 100755 --- a/xenserver/etc_init.d_openvswitch +++ b/xenserver/etc_init.d_openvswitch @@ -445,6 +445,51 @@ function restart { fi } +function internal_interfaces { + # Outputs a list of internal interfaces: + # + # - There is an internal interface for every bridge, whether it has + # an Interface record or not and whether the Interface record's + # 'type' is properly set. + # + # - There is an internal interface for each Interface record whose + # 'type' is 'internal'. + # + # But ignore interfaces that don't really exist. + for d in `(ovs-vsctl --bare \ + -- --columns=name find Interface type=internal \ + -- list-br) | sort -u` + do + if test -e "/sys/class/net/$d"; then + printf "%s " "$d" + fi + done +} + +function force_reload_kmod { + ifaces=$(internal_interfaces) + action "Configured internal interfaces: $ifaces" true + + stop + + script=$(mktemp) + action "Save interface configuration to $script" true + if ! /usr/share/openvswitch/scripts/ovs-save $ifaces > $script; then + warning "Failed to save configuration, not replacing kernel module" + start + exit 1 + fi + chmod +x $script + + action "Destroy datapaths" remove_all_dp + + remove_modules + + start + + action "Restore interface configuration from $script" $script +} + case "$1" in start) start @@ -480,6 +525,9 @@ case "$1" in /usr/sbin/ovs-vswitchd -V /usr/sbin/ovs-brcompatd -V ;; + force-reload-kmod) + force_reload_kmod + ;; help) printf "openvswitch [start|stop|restart|reload|force-reload|status|version]\n" ;; diff --git a/xenserver/openvswitch-xen.spec b/xenserver/openvswitch-xen.spec index deb1fd3d..9a050907 100644 --- a/xenserver/openvswitch-xen.spec +++ b/xenserver/openvswitch-xen.spec @@ -1,6 +1,6 @@ # Spec file for Open vSwitch. -# Copyright (C) 2009, 2010 Nicira Networks, Inc. +# Copyright (C) 2009, 2010, 2011 Nicira Networks, Inc. # # Copying and distribution of this file, with or without modification, # are permitted in any medium without royalty provided the copyright @@ -83,6 +83,8 @@ install -m 755 xenserver/usr_sbin_brctl \ $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/brctl install -m 755 xenserver/usr_share_openvswitch_scripts_sysconfig.template \ $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template +install -m 755 utilities/ovs-save \ + $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/ovs-save install -d -m 755 $RPM_BUILD_ROOT/usr/lib/xsconsole/plugins-base install -m 644 \ xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \ @@ -402,6 +404,7 @@ fi /usr/share/openvswitch/scripts/xen-bugtool /usr/share/openvswitch/scripts/brctl /usr/share/openvswitch/scripts/sysconfig.template +/usr/share/openvswitch/scripts/ovs-save /usr/share/openvswitch/vswitch.ovsschema /usr/sbin/ovs-brcompatd /usr/sbin/ovs-vswitchd