omitted.
</p>
- <column name="other_config" key="enable-statistics">
+ <column name="other_config" key="enable-statistics"
+ type='{"type": "boolean"}'>
Statistics are disabled by default to avoid overhead in the common
case when statistics gathering is not useful. Set this value to
<code>true</code> to enable populating the <ref column="statistics"/>
column or to <code>false</code> to explicitly disable it.
</column>
- <column name="statistics" key="cpu">
+ <column name="statistics" key="cpu"
+ type='{"type": "integer", "minInteger": 1}'>
<p>
Number of CPU processors, threads, or cores currently online and
available to the operating system on which Open vSwitch is running,
value. May not be all-zero.
</column>
- <column name="other_config" key="disable-in-band">
+ <column name="other_config" key="disable-in-band"
+ type='{"type": "boolean"}'>
If set to <code>true</code>, disable in-band control on the bridge
regardless of controller and manager settings.
</column>
- <column name="other_config" key="in-band-queue">
+ <column name="other_config" key="in-band-queue"
+ type='{"type": "integer", "minInteger": 0, "maxInteger": 4294967295}'>
A queue ID as a nonnegative integer. This sets the OpenFlow queue ID
that will be used by flows set up by in-band control on this bridge.
If unset, or if the port used by an in-band control flow does not have
datapath ID.
</column>
- <column name="other_config" key="flow-eviction-threshold">
+ <column name="other_config" key="flow-eviction-threshold"
+ type='{"type": "integer", "minInteger": 0}'>
<p>
A number of flows as a nonnegative integer. This sets number of
flows at which eviction from the kernel flow table will be triggered.
</p>
</column>
- <column name="other_config" key="forward-bpdu">
+ <column name="other_config" key="forward-bpdu"
+ type='{"type": "boolean"}'>
Option to allow forwarding of BPDU frames when NORMAL action if
invoked. Frames with reserved Ethernet addresses (e.g. STP BPDU) will
be forwarded when this option is enabled. If the Open vSwitch bridge
detects link failure.
</p>
- <column name="other_config" key="bond-detect-mode">
- The means used to detect link failures. Options are
- <code>carrier</code> and <code>miimon</code>. Defaults to
+ <column name="other_config" key="bond-detect-mode"
+ type='{"type": "string", "enum": ["set", ["carrier", "miimon"]]}'>
+ The means used to detect link failures. Defaults to
<code>carrier</code> which uses each interface's carrier to detect
failures. When set to <code>miimon</code>, will check for failures
by polling each interface's MII.
</column>
- <column name="other_config" key="bond-miimon-interval">
+ <column name="other_config" key="bond-miimon-interval"
+ type='{"type": "integer"}'>
The interval, in milliseconds, between successive attempts to poll
each interface's MII. Relevant only when <ref column="other_config"
key="bond-detect-mode"/> is <code>miimon</code>.
nonzero MAC address.
</column>
- <column name="other_config" key="lacp-system-priority">
+ <column name="other_config" key="lacp-system-priority"
+ type='{"type": "integer", "minInteger": 1, "maxInteger": 65535}'>
The LACP system priority of this <ref table="Port"/>. In LACP
negotiations, link status decisions are made by the system with the
- numerically lower priority. Must be a number between 1 and 65535.
+ numerically lower priority.
</column>
<column name="other_config" key="lacp-time">
</p>
</column>
- <column name="other_config" key="lacp-heartbeat">
- Treats LACP like a simple heartbeat protocol for link state
- monitoring. Most features of the LACP protocol are disabled when
- this mode is in use.
+ <column name="other_config" key="lacp-heartbeat"
+ type='{"type": "boolean"}'>
+ Treat LACP like a simple heartbeat protocol for link state
+ monitoring. Most features of the LACP protocol are disabled
+ when this mode is in use. The default if not specified is
+ <code>false</code>.
</column>
- <column name="other_config" key="bond-hash-basis">
+ <column name="other_config" key="bond-hash-basis"
+ type='{"type": "integer"}'>
An integer hashed along with flows when choosing output slaves. When
changed, all flows will be assigned different hash values possibly
causing slave selection decisions to change.
because LACP negotiation failed.
</p>
- <column name="other_config" key="bond-rebalance-interval">
+ <column name="other_config" key="bond-rebalance-interval"
+ type='{"type": "integer", "minInteger": 1000, "maxInteger": 10000}'>
For an SLB bonded port, the number of milliseconds between successive
attempts to rebalance the bond, that is, to move source MACs and
their flows from one interface on the bond to another in an attempt
- to keep usage of each interface roughly equal. The default is 10000
- (10 seconds), and the minimum is 1000 (1 second).
+ to keep usage of each interface roughly equal.
</column>
</group>
system default, typically 64). Default is the system default TTL.
</column>
- <column name="options" key="df_inherit">
+ <column name="options" key="df_inherit" type='{"type": "boolean"}'>
Optional. If enabled, the Don't Fragment bit will be copied from the
inner IP headers (those of the encapsulated traffic) to the outer
(tunnel) headers. Default is disabled; set to <code>true</code> to
enable.
</column>
- <column name="options" key="df_default">
+ <column name="options" key="df_default"
+ type='{"type": "boolean"}'>
Optional. If enabled, the Don't Fragment bit will be set by default on
tunnel headers if the <code>df_inherit</code> option is not set, or if
the encapsulated packet is not IP. Default is enabled; set to
<code>false</code> to disable.
</column>
- <column name="options" key="pmtud">
+ <column name="options" key="pmtud" type='{"type": "boolean"}'>
Optional. Enable tunnel path MTU discovery. If enabled ``ICMP
Destination Unreachable - Fragmentation Needed'' messages will be
generated for IPv4 packets with the DF bit set and IPv6 packets above
Only <code>gre</code> interfaces support these options.
</p>
- <column name="options" key="header_cache">
+ <column name="options" key="header_cache" type='{"type": "boolean"}'>
Enable caching of tunnel headers and the output path. This can lead
to a significant performance increase without changing behavior. In
general it should not be necessary to adjust this setting. However,
these options.
</p>
- <column name="options" key="csum">
+ <column name="options" key="csum" type='{"type": "boolean"}'>
<p>
Optional. Compute GRE checksums on outgoing packets. Default is
disabled, set to <code>true</code> to enable. Checksums present on
internal interface such as a bridge port.
</column>
- <column name="status" key="tunnel_egress_iface_carrier">
- Whether a carrier is detected on <ref column="status"
- key="tunnel_egress_iface"/>. Valid values are <code>down</code> and
- <code>up</code>.
+ <column name="status" key="tunnel_egress_iface_carrier"
+ type='{"type": "string", "enum": ["set", ["down", "up"]]}'>
+ Whether carrier is detected on <ref column="status"
+ key="tunnel_egress_iface"/>.
</column>
</group>
collected and written to this column.
</column>
- <column name="other_config" key="cfm_interval">
+ <column name="other_config" key="cfm_interval"
+ type='{"type": "integer"}'>
The interval, in milliseconds, between transmissions of CFM heartbeats.
Three missed heartbeat receptions indicate a connectivity fault.
Defaults to 1000.
</column>
- <column name="other_config" key="cfm_extended">
+ <column name="other_config" key="cfm_extended"
+ type='{"type": "boolean"}'>
When <code>true</code>, the CFM module operates in extended mode. This
causes it to use a nonstandard destination address to avoid conflicting
with compliant implementations which may be running concurrently on the
</group>
<group title="Bonding Configuration">
- <column name="other_config" key="bond-stable-id">
- A positive integer using in <code>stable</code> bond mode to make slave
+ <column name="other_config" key="bond-stable-id"
+ type='{"type": "integer", "minInteger": 1}'>
+ Used in <code>stable</code> bond mode to make slave
selection decisions. Allocating <ref column="other_config"
key="bond-stable-id"/> values consistently across interfaces
participating in a bond will guarantee consistent slave selection
<code>stable</code> bonding mode.
</column>
- <column name="other_config" key="lacp-port-id">
+ <column name="other_config" key="lacp-port-id"
+ type='{"type": "integer", "minInteger": 1, "maxInteger": 65535}'>
The LACP port ID of this <ref table="Interface"/>. Port IDs are
used in LACP negotiations to identify individual ports
- participating in a bond. Must be a number between 1 and
- 65535.
+ participating in a bond.
</column>
- <column name="other_config" key="lacp-port-priority">
+ <column name="other_config" key="lacp-port-priority"
+ type='{"type": "integer", "minInteger": 1, "maxInteger": 65535}'>
The LACP port priority of this <ref table="Interface"/>. In LACP
negotiations <ref table="Interface"/>s with numerically lower
- priorities are preferred for aggregation. Must be a number between 1
- and 65535.
+ priorities are preferred for aggregation.
</column>
- <column name="other_config" key="lacp-aggregation-key">
+ <column name="other_config" key="lacp-aggregation-key"
+ type='{"type": "integer", "minInteger": 1, "maxInteger": 65535}'>
The LACP aggregation key of this <ref table="Interface"/>. <ref
table="Interface"/>s with different aggregation keys may not be active
- within a given <ref table="Port"/> at the same time. Must be a number
- between 1 and 65535.
+ within a given <ref table="Port"/> at the same time.
</column>
</group>
the following key-value pair:
</p>
- <column name="other_config" key="max-rate">
+ <column name="other_config" key="max-rate" type='{"type": "integer"}'>
Maximum rate shared by all queued traffic, in bit/s. Optional. If not
specified, for physical interfaces, the default is the link rate. For
other interfaces or if the link rate cannot be determined, the default
table="QoS" column="type"/> of <code>min-rate</code>.
</p>
- <column name="other_config" key="min-rate">
+ <column name="other_config" key="min-rate"
+ type='{"type": "integer", "minInteger": 12000}'>
Minimum guaranteed bandwidth, in bit/s. Required. The floor value is
1500 bytes/s (12,000 bit/s).
</column>
table="QoS" column="type"/> of <code>linux-htb</code>.
</p>
- <column name="other_config" key="min-rate">
+ <column name="other_config" key="min-rate"
+ type='{"type": "integer", "minInteger": 1}'>
Minimum guaranteed bandwidth, in bit/s.
</column>
- <column name="other_config" key="max-rate">
+ <column name="other_config" key="max-rate"
+ type='{"type": "integer", "minInteger": 1}'>
Maximum allowed bandwidth, in bit/s. Optional. If specified, the
queue's rate will not be allowed to exceed the specified value, even
if excess bandwidth is available. If unspecified, defaults to no
limit.
</column>
- <column name="other_config" key="burst">
+ <column name="other_config" key="burst"
+ type='{"type": "integer", "minInteger": 1}'>
Burst size, in bits. This is the maximum amount of ``credits'' that a
queue can accumulate while it is idle. Optional. Details of the
<code>linux-htb</code> implementation require a minimum burst size, so
a too-small <code>burst</code> will be silently ignored.
</column>
- <column name="other_config" key="priority">
- A nonnegative 32-bit integer. Defaults to 0 if unspecified. A queue
- with a smaller <code>priority</code> will receive all the excess
- bandwidth that it can use before a queue with a larger value receives
- any. Specific priority values are unimportant; only relative ordering
- matters.
+ <column name="other_config" key="priority"
+ type='{"type": "integer", "minInteger": 0, "maxInteger": 4294967295}'>
+ A queue with a smaller <code>priority</code> will receive all the
+ excess bandwidth that it can use before a queue with a larger value
+ receives any. Specific priority values are unimportant; only relative
+ ordering matters. Defaults to 0 if unspecified.
</column>
</group>
table="QoS" column="type"/> of <code>linux-hfsc</code>.
</p>
- <column name="other_config" key="min-rate">
+ <column name="other_config" key="min-rate"
+ type='{"type": "integer", "minInteger": 1}'>
Minimum guaranteed bandwidth, in bit/s.
</column>
- <column name="other_config" key="max-rate">
+ <column name="other_config" key="max-rate"
+ type='{"type": "integer", "minInteger": 1}'>
Maximum allowed bandwidth, in bit/s. Optional. If specified, the
queue's rate will not be allowed to exceed the specified value, even if
excess bandwidth is available. If unspecified, defaults to no
<code>false</code> otherwise.
</column>
- <column name="role">
+ <column name="role"
+ type='{"type": "string", "enum": ["set", ["other", "master", "slave"]]}'>
<p>The level of authority this controller has on the associated
bridge. Possible values are:</p>
<dl>
will exist only if an error has occurred.
</column>
- <column name="status" key="state">
+ <column name="status" key="state"
+ type='{"type": "string", "enum": ["set", ["VOID", "BACKOFF", "CONNECTING", "ACTIVE", "IDLE"]]}'>
<p>
- The state of the connection to the controller. Possible values are:
+ The state of the connection to the controller:
</p>
<dl>
<dt><code>VOID</code></dt>
</p>
</column>
- <column name="status" key="sec_since_connect">
+ <column name="status" key="sec_since_connect"
+ type='{"type": "integer", "minInteger": 0}'>
The amount of time since this controller last successfully connected to
the switch (in seconds). Value is empty if controller has never
successfully connected.
</column>
- <column name="status" key="sec_since_disconnect">
+ <column name="status" key="sec_since_disconnect"
+ type='{"type": "integer", "minInteger": 1}'>
The amount of time since this controller last disconnected from
the switch (in seconds). Value is empty if controller has never
disconnected.
will exist only if an error has occurred.
</column>
- <column name="status" key="state">
+ <column name="status" key="state"
+ type='{"type": "string", "enum": ["set", ["VOID", "BACKOFF", "CONNECTING", "ACTIVE", "IDLE"]]}'>
<p>
- The state of the connection to the manager. Possible values are:
+ The state of the connection to the manager:
</p>
<dl>
<dt><code>VOID</code></dt>
</p>
</column>
- <column name="status" key="sec_since_connect">
+ <column name="status" key="sec_since_connect"
+ type='{"type": "integer", "minInteger": 0}'>
The amount of time since this manager last successfully connected
to the database (in seconds). Value is empty if manager has never
successfully connected.
</column>
- <column name="status" key="sec_since_disconnect">
+ <column name="status" key="sec_since_disconnect"
+ type='{"type": "integer", "minInteger": 0}'>
The amount of time since this manager last disconnected from the
database (in seconds). Value is empty if manager has never
disconnected.
stolen from this connection.
</column>
- <column name="status" key="n_connections">
+ <column name="status" key="n_connections"
+ type='{"type": "integer", "minInteger": 2}'>
<p>
When <ref column="target"/> specifies a connection method that
listens for inbound connections (e.g. <code>ptcp:</code> or
projects / openvswitch / commitdiff