xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
xenserver/etc_xensource_scripts_vif \
xenserver/opt_xensource_libexec_interface-reconfigure \
- xenserver/root_vswitch_scripts_sysconfig.template \
- xenserver/root_vswitch_scripts_dump-vif-details \
xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
xenserver/usr_sbin_brctl \
xenserver/usr_sbin_xen-bugtool \
+ xenserver/usr_share_vswitch_scripts_sysconfig.template \
+ xenserver/usr_share_vswitch_scripts_dump-vif-details \
xenserver/vswitch-xen.spec
test -e /etc/sysconfig/vswitch && . /etc/sysconfig/vswitch
# General config variables in /etc/sysconfig/vswitch
-: ${VSWITCH_BASE:=/root/vswitch}
: ${ENABLE_BRCOMPAT:=y}
: ${ENABLE_FAKE_PROC_NET:=y}
: ${FORCE_COREFILES:=y}
: ${BRCOMPATD_VALGRIND_OPT:=}
# Full paths to executables & modules
-vswitchd="$VSWITCH_BASE/sbin/ovs-vswitchd"
-brcompatd="$VSWITCH_BASE/sbin/ovs-brcompatd"
-dpctl="$VSWITCH_BASE/bin/ovs-dpctl"
-appctl="$VSWITCH_BASE/bin/ovs-appctl"
-ofctl="$VSWITCH_BASE/bin/ovs-ofctl"
+vswitchd="/usr/sbin/ovs-vswitchd"
+brcompatd="/usr/sbin/ovs-brcompatd"
+dpctl="/usr/bin/ovs-dpctl"
+appctl="/usr/bin/ovs-appctl"
+ofctl="/usr/bin/ovs-ofctl"
if [ "$ENABLE_FAKE_PROC_NET" = "y" ]; then
status -p ovs-brcompatd.pid ovs-brcompatd
;;
version)
- "$VSWITCH_BASE"/sbin/ovs-vswitchd -V
- "$VSWITCH_BASE"/sbin/ovs-brcompatd -V
+ /usr/sbin/ovs-vswitchd -V
+ /usr/sbin/ovs-brcompatd -V
;;
help)
printf "vswitch [start|stop|restart|reload|unload|status|version]\n"
. /etc/init.d/functions
test -e /etc/sysconfig/vswitch && . /etc/sysconfig/vswitch
-: ${VSWITCH_BASE:=/root/vswitch}
: ${VSWITCHD_CONF:=/etc/ovs-vswitchd.conf}
: ${VSWITCHD_PIDFILE:=/var/run/ovs-vswitchd.pid}
: ${VSWITCHD_PRIORITY:=-5}
# notice and this notice are preserved. This file is offered as-is,
# without warranty of any kind.
-PATH=/root/vswitch/bin:$PATH
-export PATH
-MANPATH=/root/vswitch/share/man:$MANPATH
-export MANPATH
-
alias vswitch='service vswitch'
function watchconf {
import os
import subprocess
-cfg_mod="/root/vswitch/bin/ovs-cfg-mod"
+cfg_mod="/usr/bin/ovs-cfg-mod"
vswitchd_cfg_filename="/etc/ovs-vswitchd.conf"
cacert_filename="/etc/ovs-vswitchd.cacert"
# Keep other-config/ keys in sync with device.ml:vif_udev_keys
-cfg_mod="/root/vswitch/bin/ovs-cfg-mod"
-dump_vif_details="/root/vswitch/scripts/dump-vif-details"
+cfg_mod="/usr/bin/ovs-cfg-mod"
+dump_vif_details="/usr/share/vswitch/scripts/dump-vif-details"
service="/sbin/service"
TYPE=`echo ${XENBUS_PATH} | cut -f 2 -d '/'`
run_ethtool(device, oc)
def modify_config(commands):
- run_command(['/root/vswitch/bin/ovs-cfg-mod', '-vANY:console:emer',
+ run_command(['/usr/bin/ovs-cfg-mod', '-vANY:console:emer',
'-F', '/etc/ovs-vswitchd.conf']
+ commands + ['-c'])
run_command(['/sbin/service', 'vswitch', 'reload'])
+++ /dev/null
-#!/usr/bin/python
-#
-# Script to retrieve extended information about VIFs that are
-# needed by the controller. This is called by the "vif" script,
-# which is run when virtual interfaces are added and removed.
-
-# Copyright (C) 2009 Nicira Networks, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved. This file is offered as-is,
-# without warranty of any kind.
-
-import sys
-import XenAPI
-import xen.lowlevel.xs
-
-# Query XenStore for the opaque reference of this vif
-def get_vif_ref(domid, devid):
- xenstore = xen.lowlevel.xs.xs()
- t = xenstore.transaction_start()
- vif_ref = xenstore.read(t, '/xapi/%s/private/vif/%s/ref' % (domid, devid))
- xenstore.transaction_end(t)
- return vif_ref
-
-# Query XAPI for the information we need using the vif's opaque reference
-def dump_vif_info(domid, devid, vif_ref):
- try:
- session = XenAPI.xapi_local()
- session.xenapi.login_with_password("root", "")
- vif_rec = session.xenapi.VIF.get_record(vif_ref)
- net_rec = session.xenapi.network.get_record(vif_rec["network"])
- vm_rec = session.xenapi.VM.get_record(vif_rec["VM"])
-
- # Data to allow vNetManager to associate VIFs with xapi data
- sys.stdout.write('--add=port.vif%s.%s.net-uuid=%s '
- % (domid, devid, net_rec["uuid"]))
- sys.stdout.write('--add=port.vif%s.%s.vif-mac=%s '
- % (domid, devid, vif_rec["MAC"]))
- sys.stdout.write('--add=port.vif%s.%s.vif-uuid=%s '
- % (domid, devid, vif_rec["uuid"]))
- sys.stdout.write('--add=port.vif%s.%s.vm-uuid=%s '
- % (domid, devid, vm_rec["uuid"]))
-
- # vNetManager needs to know the network UUID(s) associated with
- # each datapath. Normally interface-reconfigure adds them, but
- # interface-reconfigure never gets called for internal networks
- # (xapi does the addbr ioctl internally), so we have to do it
- # here instead for internal networks. This is only acceptable
- # because xapi is lazy about creating internal networks: it
- # only creates one just before it adds the first vif to it.
- # There may still be a brief delay between the initial
- # ovs-vswitchd connection to vNetManager and setting this
- # configuration variable, but vNetManager can tolerate that.
- if len(net_rec['PIFs']) == 0:
- key = 'bridge.%s.xs-network-uuids' % net_rec['bridge']
- value = net_rec['uuid']
- sys.stdout.write('--del-match=%s=* ' % key)
- sys.stdout.write('--add=%s=%s ' % (key, value))
- finally:
- session.xenapi.session.logout()
-
-if __name__ == '__main__':
- if (len(sys.argv) != 3):
- sys.stderr.write("ERROR: %s <domid> <devid>\n")
- sys.exit(1)
-
- domid = sys.argv[1]
- devid = sys.argv[2]
-
- vif_ref = get_vif_ref(domid, devid)
- if not vif_ref:
- sys.stderr.write("ERROR: Could not find interface vif%s.%s\n"
- % (domid, devid))
- sys.exit(1)
-
- dump_vif_info(domid, devid, vif_ref)
- sys.exit(0)
+++ /dev/null
-### Configuration options for vswitch
-
-# Copyright (C) 2009 Nicira Networks, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved. This file is offered as-is,
-# without warranty of any kind.
-
-# VSWITCH_BASE: Root directory where vswitch binaries are installed
-# VSWITCH_BASE=/root/vswitch/openvswitch/build
-
-# ENABLE_BRCOMPAT: If 'y' than emulate linux bridging interfaces
-# using the brcompat kernel module and ovs-brcompatd daemon
-# ENABLE_BRCOMPAT=y
-
-# ENABLE_FAKE_PROC_NET: If 'y' then emulate linux bonding and vlan
-# files in /proc as if the bonding and vlan demultiplexing done in
-# ovs-vswitchd were being implemented using existing Linux mechanisms.
-# This is useful in some cases when replacing existing solutions.
-# ENABLE_FAKE_PROC_NET=y
-
-# FORCE_COREFILES: If 'y' then core files will be enabled.
-# FORCE_COREFILES=y
-
-# COREFILE_PATTERN: Pattern used to determine path and filename for
-# core files when FORCE_COREFILES is 'y'. This is Linux specific.
-# See the manpage for "core".
-# COREFILE_PATTERN="/var/log/%e-%t"
-
-# VSWITCHD_CONF: File in which ovs-vswitchd stores its configuration.
-# VSWITCHD_CONF=/etc/ovs-vswitchd.conf
-
-# VSWITCHD_PIDFILE: File in which to store the pid of the running
-# ovs-vswitchd.
-# VSWITCHD_PIDFILE=/var/run/ovs-vswitchd.pid
-
-# VSWITCHD_RUN_DIR: Set the directory in which ovs-vswitchd should be
-# run. This mainly affects where core files will be placed.
-# VSWITCHD_RUN_DIR=/var/xen/vswitch
-
-# VSWITCHD_PRIORITY: "nice" priority at which to run ovs-vswitchd and related
-# processes.
-# VSWITCHD_PRIORITY=-10
-
-# VSWITCHD_LOGFILE: File to send the FILE_LOGLEVEL log messages to.
-# VSWITCHD_LOGFILE=/var/log/ovs-vswitchd.log
-
-# VSWITCHD_MEMLEAK_LOGFILE: File for logging memory leak data.
-# Enabling this option will slow ovs-vswitchd significantly. Do not
-# enable it except to debug a suspected memory leak. Use the
-# ovs-parse-leaks utility included with Open vSwitch to parse the
-# log file. For best results, you also need debug symbols.
-# VSWITCHD_MEMLEAK_LOGFILE=""
-
-# VSWITCHD_FILE_LOGLEVEL: Log level at which to log into the
-# VSWITCHD_LOG file. If this is null or not set the logfile will
-# not be created and nothing will be sent to it. This is the
-# default. The available options are: EMER, WARN, INFO and DBG.
-# VSWITCHD_FILE_LOGLEVEL=""
-
-# VSWITCHD_SYSLOG_LOGLEVEL: Log level at which to log into syslog. If
-# this is null or not set the default is to log to syslog
-# emergency and warning level messages only.
-# VSWITCHD_SYSLOG_LOGLEVEL="WARN"
-
-# VSWITCHD_STRACE_LOG: File for logging strace output.
-# If this is set to a nonempty string, then ovs-vswitchd will run
-# under strace, whose output will be logged to the specified file.
-# Enabling this option will slow ovs-vswitchd significantly.
-# VSWITCHD_STRACE_LOG and VSWITCHD_VALGRIND_LOG are mutually exclusive.
-# VSWITCHD_STRACE_LOG=""
-
-# VSWITCHD_STRACE_OPT: Options to pass to strace.
-# This option's value is honored only when VSWITCHD_STRACE_LOG is
-# set to a nonempty string.
-# VSWITCHD_STRACE_OPT=""
-
-# VSWITCHD_VALGRIND_LOG: File for logging valgrind output.
-# If this is set to a nonempty string, then ovs-vswitchd will run
-# under valgrind, whose output will be logged to the specified file.
-# Enabling this option will slow ovs-vswitchd by 100X or more.
-# valgrind is not installed by default on XenServer systems; you must
-# install it by hand to usefully enable this option.
-# VSWITCHD_STRACE_LOG and VSWITCHD_VALGRIND_LOG are mutually exclusive.
-# VSWITCHD_VALGRIND_LOG=""
-
-# VSWITCHD_VALGRIND_OPT: Options to pass to valgrind.
-# This option's value is honored only when VSWITCHD_VALGRIND_LOG is
-# set to a nonempty string.
-# VSWITCHD_VALGRIND_OPT=""
-
-# BRCOMPATD_PIDFILE: File in which to store the pid of the running
-# ovs-brcompatd (the Linux bridge compatibility daemon for ovs-vswitchd).
-# If this is the empty string, ovs-brcompatd will not be started and
-# the brcompat_mod kernel module will not be inserted. Note that
-# the default is to use brcompat!
-# BRCOMPATD_PIDFILE=/var/run/ovs-brcompatd.pid
-
-# BRCOMPATD_RUN_DIR: Set the directory in which ovs-brcompatd should be
-# run. This mainly affects where core files will be placed.
-# BRCOMPATD_RUN_DIR=/var/xen/vswitch
-
-# BRCOMPATD_PRIORITY: "nice" priority at which to run ovs-vswitchd and related
-# processes.
-# BRCOMPATD_PRIORITY=-10
-
-# BRCOMPATD_LOGFILE: File to send the FILE_LOGLEVEL log messages to.
-# BRCOMPATD_LOGFILE=/var/log/ovs-brcompatd.log
-
-# BRCOMPATD_FILE_LOGLEVEL: Log level at which to log into the
-# BRCOMPATD_LOG file. If this is null or not set the logfile will
-# not be created and nothing will be sent to it. This is the
-# default. The available options are: EMER, WARN, INFO and DBG.
-# BRCOMPATD_FILE_LOGLEVEL=""
-
-# BRCOMPATD_SYSLOG_LOGLEVEL: Log level at which to log into syslog. If
-# this is null or not set the default is to log to syslog
-# emergency and warning level messages only.
-# BRCOMPATD_SYSLOG_LOGLEVEL="WARN"
-
-# BRCOMPATD_MEMLEAK_LOGFILE: File for logging memory leak data.
-# Enabling this option will slow ovs-brcompatd significantly. Do not
-# enable it except to debug a suspected memory leak. Use the
-# ovs-parse-leaks utility included with Open vSwitch to parse the
-# log file. For best results, you also need debug symbols.
-# BRCOMPATD_MEMLEAK_LOGFILE=""
-
-# BRCOMPATD_STRACE_LOG: File for logging strace output.
-# If this is set to a nonempty string, then ovs-brcompatd will run
-# under strace, whose output will be logged to the specified file.
-# Enabling this option will slow brcompatd significantly.
-# BRCOMPATD_STRACE_LOG and BRCOMPATD_VALGRIND_LOG are mutually exclusive.
-# BRCOMPATD_STRACE_LOG=""
-
-# BRCOMPATD_STRACE_OPT: Options to pass to strace.
-# This option's value is honored only when BRCOMPATD_STRACE_LOG is
-# set to a nonempty string.
-# BRCOMPATD_STRACE_OPT=""
-
-# BRCOMPATD_VALGRIND_LOG: File for logging valgrind output.
-# If this is set to a nonempty string, then ovs-brcompatd will run
-# under valgrind, whose output will be logged to the specified file.
-# Enabling this option will slow brcompatd by 100X or more.
-# valgrind is not installed by default on XenServer systems; you must
-# install it by hand to usefully enable this option.
-# BRCOMPATD_STRACE_LOG and BRCOMPATD_VALGRIND_LOG are mutually exclusive.
-# BRCOMPATD_VALGRIND_LOG=""
-
-# BRCOMPATD_VALGRIND_OPT: Options to pass to valgrind.
-# This option's value is honored only when BRCOMPATD_VALGRIND_LOG is
-# set to a nonempty string.
-# BRCOMPATD_VALGRIND_OPT=""
import socket
import subprocess
-cfg_mod="/root/vswitch/bin/ovs-cfg-mod"
+cfg_mod="/usr/bin/ovs-cfg-mod"
vswitchd_cfg_filename="/etc/ovs-vswitchd.conf"
if __name__ == "__main__":
argv0 = sys.argv[0]
-BRCTL = "/root/vswitch/xs-original/brctl"
+BRCTL = "/usr/lib/vswitch/xs-original/brctl"
VSWITCHD_CONF = "/etc/ovs-vswitchd.conf"
# Execute the real brctl program, passing the same arguments that were passed
MULTIPATHD = '/sbin/multipathd'
NETSTAT = '/bin/netstat'
OMREPORT = '/opt/dell/srvadmin/oma/bin/omreport'
-OVS_DPCTL = '/root/vswitch/bin/ovs-dpctl'
-OVS_OFCTL = '/root/vswitch/bin/ovs-ofctl'
+OVS_DPCTL = '/usr/bin/ovs-dpctl'
+OVS_OFCTL = '/usr/bin/ovs-ofctl'
PS = '/bin/ps'
PVS = '/usr/sbin/pvs'
ROUTE = '/sbin/route'
--- /dev/null
+#!/usr/bin/python
+#
+# Script to retrieve extended information about VIFs that are
+# needed by the controller. This is called by the "vif" script,
+# which is run when virtual interfaces are added and removed.
+
+# Copyright (C) 2009 Nicira Networks, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+import sys
+import XenAPI
+import xen.lowlevel.xs
+
+# Query XenStore for the opaque reference of this vif
+def get_vif_ref(domid, devid):
+ xenstore = xen.lowlevel.xs.xs()
+ t = xenstore.transaction_start()
+ vif_ref = xenstore.read(t, '/xapi/%s/private/vif/%s/ref' % (domid, devid))
+ xenstore.transaction_end(t)
+ return vif_ref
+
+# Query XAPI for the information we need using the vif's opaque reference
+def dump_vif_info(domid, devid, vif_ref):
+ try:
+ session = XenAPI.xapi_local()
+ session.xenapi.login_with_password("root", "")
+ vif_rec = session.xenapi.VIF.get_record(vif_ref)
+ net_rec = session.xenapi.network.get_record(vif_rec["network"])
+ vm_rec = session.xenapi.VM.get_record(vif_rec["VM"])
+
+ # Data to allow vNetManager to associate VIFs with xapi data
+ sys.stdout.write('--add=port.vif%s.%s.net-uuid=%s '
+ % (domid, devid, net_rec["uuid"]))
+ sys.stdout.write('--add=port.vif%s.%s.vif-mac=%s '
+ % (domid, devid, vif_rec["MAC"]))
+ sys.stdout.write('--add=port.vif%s.%s.vif-uuid=%s '
+ % (domid, devid, vif_rec["uuid"]))
+ sys.stdout.write('--add=port.vif%s.%s.vm-uuid=%s '
+ % (domid, devid, vm_rec["uuid"]))
+
+ # vNetManager needs to know the network UUID(s) associated with
+ # each datapath. Normally interface-reconfigure adds them, but
+ # interface-reconfigure never gets called for internal networks
+ # (xapi does the addbr ioctl internally), so we have to do it
+ # here instead for internal networks. This is only acceptable
+ # because xapi is lazy about creating internal networks: it
+ # only creates one just before it adds the first vif to it.
+ # There may still be a brief delay between the initial
+ # ovs-vswitchd connection to vNetManager and setting this
+ # configuration variable, but vNetManager can tolerate that.
+ if len(net_rec['PIFs']) == 0:
+ key = 'bridge.%s.xs-network-uuids' % net_rec['bridge']
+ value = net_rec['uuid']
+ sys.stdout.write('--del-match=%s=* ' % key)
+ sys.stdout.write('--add=%s=%s ' % (key, value))
+ finally:
+ session.xenapi.session.logout()
+
+if __name__ == '__main__':
+ if (len(sys.argv) != 3):
+ sys.stderr.write("ERROR: %s <domid> <devid>\n")
+ sys.exit(1)
+
+ domid = sys.argv[1]
+ devid = sys.argv[2]
+
+ vif_ref = get_vif_ref(domid, devid)
+ if not vif_ref:
+ sys.stderr.write("ERROR: Could not find interface vif%s.%s\n"
+ % (domid, devid))
+ sys.exit(1)
+
+ dump_vif_info(domid, devid, vif_ref)
+ sys.exit(0)
--- /dev/null
+### Configuration options for vswitch
+
+# Copyright (C) 2009 Nicira Networks, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+# ENABLE_BRCOMPAT: If 'y' than emulate linux bridging interfaces
+# using the brcompat kernel module and ovs-brcompatd daemon
+# ENABLE_BRCOMPAT=y
+
+# ENABLE_FAKE_PROC_NET: If 'y' then emulate linux bonding and vlan
+# files in /proc as if the bonding and vlan demultiplexing done in
+# ovs-vswitchd were being implemented using existing Linux mechanisms.
+# This is useful in some cases when replacing existing solutions.
+# ENABLE_FAKE_PROC_NET=y
+
+# FORCE_COREFILES: If 'y' then core files will be enabled.
+# FORCE_COREFILES=y
+
+# COREFILE_PATTERN: Pattern used to determine path and filename for
+# core files when FORCE_COREFILES is 'y'. This is Linux specific.
+# See the manpage for "core".
+# COREFILE_PATTERN="/var/log/%e-%t"
+
+# VSWITCHD_CONF: File in which ovs-vswitchd stores its configuration.
+# VSWITCHD_CONF=/etc/ovs-vswitchd.conf
+
+# VSWITCHD_PIDFILE: File in which to store the pid of the running
+# ovs-vswitchd.
+# VSWITCHD_PIDFILE=/var/run/ovs-vswitchd.pid
+
+# VSWITCHD_RUN_DIR: Set the directory in which ovs-vswitchd should be
+# run. This mainly affects where core files will be placed.
+# VSWITCHD_RUN_DIR=/var/xen/vswitch
+
+# VSWITCHD_PRIORITY: "nice" priority at which to run ovs-vswitchd and related
+# processes.
+# VSWITCHD_PRIORITY=-10
+
+# VSWITCHD_LOGFILE: File to send the FILE_LOGLEVEL log messages to.
+# VSWITCHD_LOGFILE=/var/log/ovs-vswitchd.log
+
+# VSWITCHD_MEMLEAK_LOGFILE: File for logging memory leak data.
+# Enabling this option will slow ovs-vswitchd significantly. Do not
+# enable it except to debug a suspected memory leak. Use the
+# ovs-parse-leaks utility included with Open vSwitch to parse the
+# log file. For best results, you also need debug symbols.
+# VSWITCHD_MEMLEAK_LOGFILE=""
+
+# VSWITCHD_FILE_LOGLEVEL: Log level at which to log into the
+# VSWITCHD_LOG file. If this is null or not set the logfile will
+# not be created and nothing will be sent to it. This is the
+# default. The available options are: EMER, WARN, INFO and DBG.
+# VSWITCHD_FILE_LOGLEVEL=""
+
+# VSWITCHD_SYSLOG_LOGLEVEL: Log level at which to log into syslog. If
+# this is null or not set the default is to log to syslog
+# emergency and warning level messages only.
+# VSWITCHD_SYSLOG_LOGLEVEL="WARN"
+
+# VSWITCHD_STRACE_LOG: File for logging strace output.
+# If this is set to a nonempty string, then ovs-vswitchd will run
+# under strace, whose output will be logged to the specified file.
+# Enabling this option will slow ovs-vswitchd significantly.
+# VSWITCHD_STRACE_LOG and VSWITCHD_VALGRIND_LOG are mutually exclusive.
+# VSWITCHD_STRACE_LOG=""
+
+# VSWITCHD_STRACE_OPT: Options to pass to strace.
+# This option's value is honored only when VSWITCHD_STRACE_LOG is
+# set to a nonempty string.
+# VSWITCHD_STRACE_OPT=""
+
+# VSWITCHD_VALGRIND_LOG: File for logging valgrind output.
+# If this is set to a nonempty string, then ovs-vswitchd will run
+# under valgrind, whose output will be logged to the specified file.
+# Enabling this option will slow ovs-vswitchd by 100X or more.
+# valgrind is not installed by default on XenServer systems; you must
+# install it by hand to usefully enable this option.
+# VSWITCHD_STRACE_LOG and VSWITCHD_VALGRIND_LOG are mutually exclusive.
+# VSWITCHD_VALGRIND_LOG=""
+
+# VSWITCHD_VALGRIND_OPT: Options to pass to valgrind.
+# This option's value is honored only when VSWITCHD_VALGRIND_LOG is
+# set to a nonempty string.
+# VSWITCHD_VALGRIND_OPT=""
+
+# BRCOMPATD_PIDFILE: File in which to store the pid of the running
+# ovs-brcompatd (the Linux bridge compatibility daemon for ovs-vswitchd).
+# If this is the empty string, ovs-brcompatd will not be started and
+# the brcompat_mod kernel module will not be inserted. Note that
+# the default is to use brcompat!
+# BRCOMPATD_PIDFILE=/var/run/ovs-brcompatd.pid
+
+# BRCOMPATD_RUN_DIR: Set the directory in which ovs-brcompatd should be
+# run. This mainly affects where core files will be placed.
+# BRCOMPATD_RUN_DIR=/var/xen/vswitch
+
+# BRCOMPATD_PRIORITY: "nice" priority at which to run ovs-vswitchd and related
+# processes.
+# BRCOMPATD_PRIORITY=-10
+
+# BRCOMPATD_LOGFILE: File to send the FILE_LOGLEVEL log messages to.
+# BRCOMPATD_LOGFILE=/var/log/ovs-brcompatd.log
+
+# BRCOMPATD_FILE_LOGLEVEL: Log level at which to log into the
+# BRCOMPATD_LOG file. If this is null or not set the logfile will
+# not be created and nothing will be sent to it. This is the
+# default. The available options are: EMER, WARN, INFO and DBG.
+# BRCOMPATD_FILE_LOGLEVEL=""
+
+# BRCOMPATD_SYSLOG_LOGLEVEL: Log level at which to log into syslog. If
+# this is null or not set the default is to log to syslog
+# emergency and warning level messages only.
+# BRCOMPATD_SYSLOG_LOGLEVEL="WARN"
+
+# BRCOMPATD_MEMLEAK_LOGFILE: File for logging memory leak data.
+# Enabling this option will slow ovs-brcompatd significantly. Do not
+# enable it except to debug a suspected memory leak. Use the
+# ovs-parse-leaks utility included with Open vSwitch to parse the
+# log file. For best results, you also need debug symbols.
+# BRCOMPATD_MEMLEAK_LOGFILE=""
+
+# BRCOMPATD_STRACE_LOG: File for logging strace output.
+# If this is set to a nonempty string, then ovs-brcompatd will run
+# under strace, whose output will be logged to the specified file.
+# Enabling this option will slow brcompatd significantly.
+# BRCOMPATD_STRACE_LOG and BRCOMPATD_VALGRIND_LOG are mutually exclusive.
+# BRCOMPATD_STRACE_LOG=""
+
+# BRCOMPATD_STRACE_OPT: Options to pass to strace.
+# This option's value is honored only when BRCOMPATD_STRACE_LOG is
+# set to a nonempty string.
+# BRCOMPATD_STRACE_OPT=""
+
+# BRCOMPATD_VALGRIND_LOG: File for logging valgrind output.
+# If this is set to a nonempty string, then ovs-brcompatd will run
+# under valgrind, whose output will be logged to the specified file.
+# Enabling this option will slow brcompatd by 100X or more.
+# valgrind is not installed by default on XenServer systems; you must
+# install it by hand to usefully enable this option.
+# BRCOMPATD_STRACE_LOG and BRCOMPATD_VALGRIND_LOG are mutually exclusive.
+# BRCOMPATD_VALGRIND_LOG=""
+
+# BRCOMPATD_VALGRIND_OPT: Options to pass to valgrind.
+# This option's value is honored only when BRCOMPATD_VALGRIND_LOG is
+# set to a nonempty string.
+# BRCOMPATD_VALGRIND_OPT=""
# rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
#
%define version %{vswitch_version}-%{xen_version}
-%define _prefix /root/vswitch
Name: vswitch
Summary: Virtual switch
%setup -q -n openvswitch-%{vswitch_version}
%build
-./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
+./configure --prefix=/usr --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
make %{_smp_mflags}
%install
rm -rf $RPM_BUILD_ROOT
-make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}
+make install DESTDIR=$RPM_BUILD_ROOT
install -d -m 755 $RPM_BUILD_ROOT/etc
install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
install -m 755 xenserver/etc_init.d_vswitch \
install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
$RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
-install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/scripts
+install -d -m 755 $RPM_BUILD_ROOT/usr/share/vswitch/scripts
install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
- $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
+ $RPM_BUILD_ROOT/usr/share/vswitch/scripts/interface-reconfigure
install -m 755 xenserver/etc_xensource_scripts_vif \
- $RPM_BUILD_ROOT%{_prefix}/scripts/vif
-install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
- $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
+ $RPM_BUILD_ROOT/usr/share/vswitch/scripts/vif
+install -m 755 xenserver/usr_share_vswitch_scripts_dump-vif-details \
+ $RPM_BUILD_ROOT/usr/share/vswitch/scripts/dump-vif-details
install -m 755 xenserver/usr_sbin_xen-bugtool \
- $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
+ $RPM_BUILD_ROOT/usr/share/vswitch/scripts/xen-bugtool
install -m 755 xenserver/usr_sbin_brctl \
- $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
-install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
- $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
+ $RPM_BUILD_ROOT/usr/share/vswitch/scripts/brctl
+install -m 755 xenserver/usr_share_vswitch_scripts_sysconfig.template \
+ $RPM_BUILD_ROOT/usr/share/vswitch/scripts/sysconfig.template
install -m 644 \
xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
- $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
+ $RPM_BUILD_ROOT/usr/share/vswitch/scripts/XSFeatureVSwitch.py
-install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/kernel_modules
-find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT%{_prefix}/kernel_modules/ \;
+install -d -m 755 $RPM_BUILD_ROOT/root/vswitch/kernel_modules
+find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT/root/vswitch/kernel_modules/ \;
# Get rid of stuff we don't want to make RPM happy.
-rm -rf \
- $RPM_BUILD_ROOT/root/vswitch/bin/ezio-term \
- $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
- $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
- $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
- $RPM_BUILD_ROOT/root/vswitch/bin/ovs-openflowd \
- $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
- $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
- $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
- $RPM_BUILD_ROOT/root/vswitch/kernel_modules/veth_mod.ko \
- $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
- $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
- $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
- $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
- $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-openflowd.8 \
- $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
- $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
+rm \
+ $RPM_BUILD_ROOT/usr/bin/ovs-controller \
+ $RPM_BUILD_ROOT/usr/bin/ovs-discover \
+ $RPM_BUILD_ROOT/usr/bin/ovs-kill \
+ $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
+ $RPM_BUILD_ROOT/usr/bin/ovs-pki \
+ $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
+ $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
+ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
+ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
+ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
+ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
+ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
+rm -f $RPM_BUILD_ROOT/root/vswitch/kernel_modules/veth_mod.ko
+rm -r \
+ $RPM_BUILD_ROOT/usr/share/openvswitch/commands
install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
printf "Re-creating xapi database cache... "
fi
- if /root/vswitch/scripts/interface-reconfigure init-dbcache; then
+ if /usr/share/vswitch/scripts/interface-reconfigure init-dbcache; then
printf "done.\n"
else
printf "FAILED\n"
# Create default or update existing /etc/sysconfig/vswitch.
SYSCONFIG=/etc/sysconfig/vswitch
-TEMPLATE=/root/vswitch/scripts/sysconfig.template
+TEMPLATE=/usr/share/vswitch/scripts/sysconfig.template
if [ ! -e $SYSCONFIG ]; then
cp $TEMPLATE $SYSCONFIG
else
fi
# Replace XenServer files by our versions.
-mkdir -p %{_prefix}/xs-original \
+mkdir -p /usr/lib/vswitch/xs-original \
|| printf "Could not create script backup directory.\n"
for f in \
/opt/xensource/libexec/interface-reconfigure \
do
s=$(basename "$f")
t=$(readlink "$f")
- if [ "$t" != "%{_prefix}/scripts/$s" ]; then
- mv "$f" %{_prefix}/xs-original/ \
+ if [ "$t" != "/usr/share/vswitch/scripts/$s" ]; then
+ mv "$f" /usr/lib/vswitch/xs-original/ \
|| printf "Could not save original XenServer $s script\n"
- ln -s "%{_prefix}/scripts/$s" "$f" \
+ ln -s "/usr/share/vswitch/scripts/$s" "$f" \
|| printf "Could not link to vSwitch $s script\n"
fi
done
# Install xsconsole plugin
plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
-if [ "$plugin" != "/root/vswitch/scripts/XSFeatureVSwitch.py" ]; then
+if [ "$plugin" != "/usr/share/vswitch/scripts/XSFeatureVSwitch.py" ]; then
rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
- ln -s /root/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
+ ln -s /usr/share/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
fi
# Ensure all required services are set to run
/usr/sbin/brctl
do
s=$(basename "$f")
- if [ ! -f "%{_prefix}/xs-original/$s" ]; then
- printf "Original XenServer $s script not present in %{_prefix}/xs-original\n"
+ if [ ! -f "/usr/lib/vswitch/xs-original/$s" ]; then
+ printf "Original XenServer $s script not present in /usr/lib/vswitch/xs-original\n"
printf "Could not restore original XenServer script.\n"
else
(rm -f "$f" \
- && mv "%{_prefix}/xs-original/$s" "$f") \
+ && mv "/usr/lib/vswitch/xs-original/$s" "$f") \
|| printf "Could not restore original XenServer $s script.\n"
fi
done
- find %{_prefix} -type d -depth -exec rmdir \{\} \; \
- || printf "Could not remove vSwitch install directory.\n"
-
# Remove all configuration files
rm -f /etc/ovs-vswitchd.conf
rm -f /etc/sysconfig/vswitch
/etc/profile.d/vswitch.sh
/root/vswitch/kernel_modules/brcompat_mod.ko
/root/vswitch/kernel_modules/openvswitch_mod.ko
-/root/vswitch/scripts/dump-vif-details
-/root/vswitch/scripts/interface-reconfigure
-/root/vswitch/scripts/vif
-/root/vswitch/scripts/xen-bugtool
-/root/vswitch/scripts/XSFeatureVSwitch.py
-/root/vswitch/scripts/brctl
-/root/vswitch/scripts/sysconfig.template
+/usr/share/vswitch/scripts/dump-vif-details
+/usr/share/vswitch/scripts/interface-reconfigure
+/usr/share/vswitch/scripts/vif
+/usr/share/vswitch/scripts/xen-bugtool
+/usr/share/vswitch/scripts/XSFeatureVSwitch.py
+/usr/share/vswitch/scripts/brctl
+/usr/share/vswitch/scripts/sysconfig.template
# Following two files are generated automatically by rpm. We don't
# really need them and they won't be used on the XenServer, but there
# isn't an obvious place to get rid of them since they are generated
# after the install script runs. Since they are small, we just
# include them.
-/root/vswitch/scripts/XSFeatureVSwitch.pyc
-/root/vswitch/scripts/XSFeatureVSwitch.pyo
-/root/vswitch/sbin/ovs-brcompatd
-/root/vswitch/sbin/ovs-vswitchd
-/root/vswitch/bin/ovs-appctl
-/root/vswitch/bin/ovs-cfg-mod
-/root/vswitch/bin/ovs-dpctl
-/root/vswitch/bin/ovs-ofctl
-/root/vswitch/share/man/man5/ovs-vswitchd.conf.5
-/root/vswitch/share/man/man8/ovs-appctl.8
-/root/vswitch/share/man/man8/ovs-brcompatd.8
-/root/vswitch/share/man/man8/ovs-cfg-mod.8
-/root/vswitch/share/man/man8/ovs-dpctl.8
-/root/vswitch/share/man/man8/ovs-ofctl.8
-/root/vswitch/share/man/man8/ovs-vswitchd.8
+/usr/share/vswitch/scripts/XSFeatureVSwitch.pyc
+/usr/share/vswitch/scripts/XSFeatureVSwitch.pyo
+/usr/sbin/ovs-brcompatd
+/usr/sbin/ovs-vswitchd
+/usr/bin/ovs-appctl
+/usr/bin/ovs-cfg-mod
+/usr/bin/ovs-dpctl
+/usr/bin/ovs-ofctl
+/usr/share/man/man5/ovs-vswitchd.conf.5.gz
+/usr/share/man/man8/ovs-appctl.8.gz
+/usr/share/man/man8/ovs-brcompatd.8.gz
+/usr/share/man/man8/ovs-cfg-mod.8.gz
+/usr/share/man/man8/ovs-dpctl.8.gz
+/usr/share/man/man8/ovs-ofctl.8.gz
+/usr/share/man/man8/ovs-vswitchd.8.gz
/var/lib/openvswitch
projects / openvswitch / commitdiff