--- /dev/null
+ How to Install Open vSwitch on Red Hat Enterprise Linux
+ =======================================================
+
+This document describes how to build and install Open vSwitch on a Red
+Hat Enterprise Linux (RHEL) host. If you want to install Open vSwitch
+on a generic Linux host, see INSTALL.Linux instead.
+
+We have tested these instructions with RHEL 5.6 and RHEL 6.0.
+
+Building Open vSwitch for RHEL
+------------------------------
+
+You may build from an Open vSwitch distribution tarball or from an
+Open vSwitch Git tree.
+
+Before you begin, note the RPM source directory on your version of
+RHEL. On RHEL 5, the default RPM source directory is
+/usr/src/redhat/SOURCES. On RHEL 6, it is $HOME/rpmbuild/SOURCES.
+
+1. If you are building from an Open vSwitch Git tree, then you will
+ need to first create a distribution tarball by running "./boot.sh;
+ ./configure; make dist" in the Git tree.
+
+2. Copy the distribution tarball into the RPM source directory.
+
+3. Unpack the distribution tarball into a temporary directory and "cd"
+ into the root of the distribution tarball.
+
+4. To build Open vSwitch userspace, run:
+
+ rpmbuild -bb rhel/openvswitch.spec
+
+ This produces two RPMs: "openvswitch" and "openvswitch-debuginfo".
+
+5a. On RHEL 5, to build the Open vSwitch kernel module, copy
+ rhel/kmodtool-openvswitch-el5.sh into the RPM source directory and
+ run:
+
+ rpmbuild -bb --target=i686-unknown-linux \
+ rhel/openvswitch-kmod-rhel5.spec
+
+ You might have to specify a kernel version, e.g.:
+
+ rpmbuild -bb -D "kversion 2.6.18-238.12.1.el5" \
+ --target=i686-unknown-linux \
+ rhel/openvswitch-kmod-rhel5.spec
+
+ This produces a "kmod-openvswitch" RPM for each kernel variant,
+ which is usually: "kmod-openvswitch", "kmod-openvswitch-xen", and
+ "kmod-openvswitch-PAE".
+
+5b. On RHEL 6, to build the Open vSwitch kernel module, run:
+
+ rpmbuild -bb rhel/openvswitch-kmod-rhel6.spec
+
+ This produces an "kmod-openvswitch" RPM.
+
+Reporting Bugs
+--------------
+
+Please report problems to bugs@openvswitch.org.
DESIGN \
INSTALL.KVM \
INSTALL.Linux \
+ INSTALL.RHEL \
INSTALL.SSL \
INSTALL.XenServer \
INSTALL.bridge \
include debian/automake.mk
include vswitchd/automake.mk
include ovsdb/automake.mk
+include rhel/automake.mk
include xenserver/automake.mk
include python/ovs/automake.mk
The included Linux kernel module supports Linux 2.6.18 and up, with
testing focused on 2.6.32 with Centos and Xen patches. Open vSwitch
-also has special support for Citrix XenServer hosts.
+also has special support for Citrix XenServer and Red Hat Enterprise
+Linux hosts.
Open vSwitch can also operate, at a cost in performance, entirely in
userspace, without assistance from a kernel module. This userspace
* ovs-dpctl, a tool for configuring the switch kernel module.
- * Scripts and specs for building RPMs that allow Open vSwitch
- to be installed on a Citrix XenServer host as a drop-in
- replacement for its switch, with additional functionality.
+ * Scripts and specs for building RPMs for Citrix XenServer and Red
+ Hat Enterprise Linux. The XenServer RPMs allow Open vSwitch to
+ be installed on a Citrix XenServer host as a drop-in replacement
+ for its switch, with additional functionality.
* ovs-vsctl, a utility for querying and updating the configuration
of ovs-vswitchd.
To build RPMs for installing Open vSwitch on a Citrix XenServer host
or resource pool, read INSTALL.XenServer.
+To build RPMs for installing Open vSwitch on a Red Hat Enterprise
+Linux host, read INSTALL.RHEL.
+
To use Open vSwitch with KVM on Linux, read INSTALL.Linux, then
INSTALL.KVM.
--- /dev/null
+openvswitch-kmod-rhel5.spec
+openvswitch-kmod-rhel6.spec
+openvswitch.spec
--- /dev/null
+# Copyright (C) 2009, 2010, 2011 Nicira Networks, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+EXTRA_DIST += \
+ rhel/automake.mk \
+ rhel/etc_init.d_openvswitch \
+ rhel/etc_logrotate.d_openvswitch \
+ rhel/kmodtool-openvswitch-el5.sh \
+ rhel/openvswitch-kmod-rhel5.spec \
+ rhel/openvswitch-kmod-rhel5.spec.in \
+ rhel/openvswitch-kmod-rhel6.spec \
+ rhel/openvswitch-kmod-rhel6.spec.in \
+ rhel/openvswitch.spec \
+ rhel/openvswitch.spec.in \
+ rhel/usr_share_openvswitch_scripts_sysconfig.template
+
+
+$(srcdir)/rhel/openvswitch-kmod-rhel5.spec: rhel/openvswitch-kmod-rhel5.spec.in $(top_builddir)/config.status
+ sed -e 's,[@]VERSION[@],$(VERSION),g' < $< > $@
+
+$(srcdir)/rhel/openvswitch-kmod-rhel6.spec: rhel/openvswitch-kmod-rhel6.spec.in $(top_builddir)/config.status
+
+ sed -e 's,[@]VERSION[@],$(VERSION),g' < $< > $@
+
+$(srcdir)/rhel/openvswitch.spec: rhel/openvswitch.spec.in $(top_builddir)/config.status
+ sed -e 's,[@]VERSION[@],$(VERSION),g' < $< > $@
--- /dev/null
+#!/bin/sh
+#
+# openvswitch
+#
+# chkconfig: 2345 09 91
+# description: Manage Open vSwitch kernel modules and user-space daemons
+
+# Copyright (C) 2009, 2010, 2011 Nicira Networks, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at:
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+### BEGIN INIT INFO
+# Provides: openvswitch-switch
+# Required-Start:
+# Required-Stop:
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Open vSwitch switch
+### END INIT INFO
+
+. /usr/share/openvswitch/scripts/ovs-lib.sh || exit 1
+test -e /etc/sysconfig/openvswitch && . /etc/sysconfig/openvswitch
+
+start () {
+ # Allow GRE traffic.
+ /sbin/iptables -I INPUT -p gre -j ACCEPT
+
+ set $ovs_ctl ${1-start}
+ set "$@" --system-id=random
+ if test X"$FORCE_COREFILES" != X; then
+ set "$@" --force-corefiles="$FORCE_COREFILES"
+ fi
+ if test X"$OVSDB_SERVER_PRIORITY" != X; then
+ set "$@" --ovsdb-server-priority="$OVSDB_SERVER_PRIORITY"
+ fi
+ if test X"$VSWITCHD_PRIORITY" != X; then
+ set "$@" --ovs-vswitchd-priority="$VSWITCHD_PRIORITY"
+ fi
+ if test X"$VSWITCHD_MLOCKALL" != X; then
+ set "$@" --mlockall="$VSWITCHD_MLOCKALL"
+ fi
+ if test ! -e /var/run/openvswitch.booted; then
+ touch /var/run/openvswitch.booted
+ set "$@" --delete-bridges
+ fi
+ "$@"
+
+ touch /var/lock/subsys/openvswitch
+}
+
+stop () {
+ $ovs_ctl stop
+ rm -f /var/lock/subsys/openvswitch
+}
+
+ovs_ctl=/usr/share/openvswitch/scripts/ovs-ctl
+case $1 in
+ start)
+ start
+ ;;
+ stop)
+ stop
+ ;;
+ restart)
+ stop
+ start
+ ;;
+ reload|force-reload)
+ # Nothing to do.
+ ;;
+ status)
+ $ovs_ctl status
+ ;;
+ version)
+ $ovs_ctl version
+ ;;
+ force-reload-kmod)
+ start force-reload-kmod
+ ;;
+ help)
+ printf "$0 [start|stop|restart|reload|force-reload|status|version|force-reload-kmod]\n"
+ ;;
+ *)
+ printf "Unknown command: $1\n"
+ exit 1
+ ;;
+esac
--- /dev/null
+# Copyright (C) 2009, 2010, 2011 Nicira Networks, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+/var/log/openvswitch/*.log {
+ sharedscripts
+ missingok
+ postrotate
+ # Tell Open vSwitch daemons to reopen their log files
+ if [ -e /var/run/openvswitch/ovs-vswitchd.pid ]; then
+ /usr/bin/ovs-appctl -t ovs-vswitchd vlog/reopen
+ fi
+ if [ -e /var/run/openvswitch/ovsdb-server.pid ]; then
+ /usr/bin/ovs-appctl -t ovsdb-server vlog/reopen
+ fi
+ endscript
+}
--- /dev/null
+#!/bin/bash
+
+# kmodtool - Helper script for building kernel module RPMs
+# Copyright (c) 2003-2008 Ville Skyttä <ville.skytta@iki.fi>,
+# Thorsten Leemhuis <fedora@leemhuis.info>
+# Jon Masters <jcm@redhat.com>
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be
+# included in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+# LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+# WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+shopt -s extglob
+
+myprog="kmodtool"
+myver="0.10.10_kmp3"
+knownvariants=@(BOOT|PAE|@(big|huge)mem|debug|enterprise|kdump|?(large)smp|uml|xen[0U]?(-PAE)|xen)
+kmod_name=
+kver=
+verrel=
+variant=
+kmp=
+
+get_verrel ()
+{
+ verrel=${1:-$(uname -r)}
+ verrel=${verrel%%$knownvariants}
+}
+
+print_verrel ()
+{
+ get_verrel $@
+ echo "${verrel}"
+}
+
+get_variant ()
+{
+ get_verrel $@
+ variant=${1:-$(uname -r)}
+ variant=${variant##$verrel}
+ variant=${variant:-'""'}
+}
+
+print_variant ()
+{
+ get_variant $@
+ echo "${variant}"
+}
+
+get_rpmtemplate ()
+{
+ local variant="${1}"
+ local dashvariant="${variant:+-${variant}}"
+ case "$verrel" in
+ *.el*) kdep="kernel${dashvariant}-%{_target_cpu} = ${verrel}" ;;
+ *.EL*) kdep="kernel${dashvariant}-%{_target_cpu} = ${verrel}" ;;
+ *) kdep="kernel-%{_target_cpu} = ${verrel}${variant}" ;;
+ esac
+
+ echo "%package -n kmod-${kmod_name}${dashvariant}"
+
+ if [ -z "$kmp_provides_summary" ]; then
+ echo "Summary: ${kmod_name} kernel module(s)"
+ fi
+
+ if [ -z "$kmp_provides_group" ]; then
+ echo "Group: System Environment/Kernel"
+ fi
+
+ if [ ! -z "$kmp_version" ]; then
+ echo "Version: %{kmp_version}"
+ fi
+
+ if [ ! -z "$kmp_release" ]; then
+ echo "Release: %{kmp_release}"
+ fi
+
+ if [ ! -z "$kmp" ]; then
+ echo "%global _use_internal_dependency_generator 0"
+ fi
+
+ cat <<EOF
+Provides: kernel-modules = ${verrel}${variant}
+Provides: ${kmod_name}-kmod = %{?epoch:%{epoch}:}%{version}-%{release}
+EOF
+
+ if [ -z "$kmp" ]; then
+ echo "Requires: ${kdep}"
+ fi
+
+#
+# RHEL5 - Remove common package requirement on general kmod packages.
+# Requires: ${kmod_name}-kmod-common >= %{?epoch:%{epoch}:}%{version}
+#
+
+ cat <<EOF
+Requires(post): /sbin/depmod
+Requires(postun): /sbin/depmod
+EOF
+
+if [ "no" != "$kmp_nobuildreqs" ]
+then
+ echo "BuildRequires: kernel${dashvariant}-devel-%{_target_cpu} = ${verrel}"
+fi
+
+if [ "" != "$kmp_override_preamble" ]
+then
+ cat "$kmp_override_preamble"
+fi
+
+cat <<EOF
+%description -n kmod-${kmod_name}${dashvariant}
+This package provides the ${kmod_name} kernel modules built for the Linux
+kernel ${verrel}${variant} for the %{_target_cpu} family of processors.
+%post -n kmod-${kmod_name}${dashvariant}
+if [ -e "/boot/System.map-${verrel}${variant}" ]; then
+ /sbin/depmod -aeF "/boot/System.map-${verrel}${variant}" "${verrel}${variant}" > /dev/null || :
+fi
+EOF
+
+ if [ ! -z "$kmp" ]; then
+ cat <<EOF
+
+#modules=( \$(rpm -ql kmod-${kmod_name}${dashvariant} | grep '\.ko$') )
+modules=( \$(find /lib/modules/${verrel}${variant}/extra/${kmod_name} \
+ | grep '\.ko$') )
+if [ -x "/sbin/weak-modules" ]; then
+ printf '%s\n' "\${modules[@]}" \
+ | /sbin/weak-modules --add-modules
+fi
+%preun -n kmod-${kmod_name}${dashvariant}
+rpm -ql kmod-${kmod_name}${dashvariant} | grep '\.ko$' \
+ > /var/run/rpm-kmod-${kmod_name}${dashvariant}-modules
+EOF
+
+ fi
+
+ cat <<EOF
+%postun -n kmod-${kmod_name}${dashvariant}
+/sbin/depmod -aF /boot/System.map-${verrel}${variant} ${verrel}${variant} &> /dev/null || :
+EOF
+
+ if [ ! -z "$kmp" ]; then
+ cat <<EOF
+modules=( \$(cat /var/run/rpm-kmod-${kmod_name}${dashvariant}-modules) )
+#rm /var/run/rpm-kmod-${kmod_name}${dashvariant}-modules
+if [ -x "/sbin/weak-modules" ]; then
+ printf '%s\n' "\${modules[@]}" \
+ | /sbin/weak-modules --remove-modules
+fi
+EOF
+ fi
+
+echo "%files -n kmod-${kmod_name}${dashvariant}"
+
+if [ "" == "$kmp_override_filelist" ];
+then
+ echo "%defattr(644,root,root,755)"
+ echo "/lib/modules/${verrel}${variant}/"
+ echo "%config /etc/depmod.d/kmod-${kmod_name}.conf"
+ #BZ252188 - I've commented this out for the moment since RHEL5 doesn't
+ # really support external firmware e.g. at install time. If
+ # you really want it, use an override filelist solution.
+ #echo "/lib/firmware/"
+else
+ cat "$kmp_override_filelist"
+fi
+}
+
+print_rpmtemplate ()
+{
+ kmod_name="${1}"
+ shift
+ kver="${1}"
+ get_verrel "${1}"
+ shift
+ if [ -z "${kmod_name}" ] ; then
+ echo "Please provide the kmodule-name as first parameter." >&2
+ exit 2
+ elif [ -z "${kver}" ] ; then
+ echo "Please provide the kver as second parameter." >&2
+ exit 2
+ elif [ -z "${verrel}" ] ; then
+ echo "Couldn't find out the verrel." >&2
+ exit 2
+ fi
+
+ for variant in "$@" ; do
+ if [ "default" == "$variant" ];
+ then
+ get_rpmtemplate ""
+ else
+ get_rpmtemplate "${variant}"
+ fi
+ done
+}
+
+usage ()
+{
+ cat <<EOF
+You called: ${invocation}
+
+Usage: ${myprog} <command> <option>+
+ Commands:
+ verrel <uname>
+ - Get "base" version-release.
+ variant <uname>
+ - Get variant from uname.
+ rpmtemplate <mainpgkname> <uname> <variants>
+ - Return a template for use in a source RPM
+ rpmtemplate_kmp <mainpgkname> <uname> <variants>
+ - Return a template for use in a source RPM with KMP dependencies
+ version
+ - Output version number and exit.
+EOF
+}
+
+invocation="$(basename ${0}) $@"
+while [ "${1}" ] ; do
+ case "${1}" in
+ verrel)
+ shift
+ print_verrel $@
+ exit $?
+ ;;
+ variant)
+ shift
+ print_variant $@
+ exit $?
+ ;;
+ rpmtemplate)
+ shift
+ print_rpmtemplate "$@"
+ exit $?
+ ;;
+ rpmtemplate_kmp)
+ shift
+ kmp=1
+ print_rpmtemplate "$@"
+ exit $?
+ ;;
+ version)
+ echo "${myprog} ${myver}"
+ exit 0
+ ;;
+ *)
+ echo "Error: Unknown option '${1}'." >&2
+ usage >&2
+ exit 2
+ ;;
+ esac
+done
+
+# Local variables:
+# mode: sh
+# sh-indentation: 2
+# indent-tabs-mode: nil
+# End:
+# ex: ts=2 sw=2 et
--- /dev/null
+# Spec file for Open vSwitch kernel modules on Red Hat Enterprise
+# Linux 5.
+
+# Copyright (C) 2009, 2010, 2011 Nicira Networks, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+%define kmod_name openvswitch
+%{!?kversion: %define kversion 2.6.18-238.12.1.el5}
+
+Name: %{kmod_name}-kmod
+Version: @VERSION@
+Release: 1%{?dist}
+Group: System Environment/Kernel
+License: GPLv2
+Summary: Open vSwitch kernel modules
+URL: http://openvswitch.org/
+
+BuildRequires: redhat-rpm-config
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-build-%(%{__id_u} -n)
+ExclusiveArch: i686 x86_64
+
+# Sources.
+Source0: %{kmod_name}-%{version}.tar.gz
+Source10: kmodtool-%{kmod_name}-el5.sh
+
+# Define the variants for each architecture.
+%define basevar ""
+%ifarch i686
+%define paevar PAE
+%endif
+%ifarch i686 x86_64
+%define xenvar xen
+%endif
+
+# If kvariants isn't defined on the rpmbuild line, build all variants for this architecture.
+%{!?kvariants: %define kvariants %{?basevar} %{?xenvar} %{?paevar}}
+
+# Magic hidden here.
+%{expand:%(sh %{SOURCE10} rpmtemplate_kmp %{kmod_name} %{kversion} %{kvariants})}
+
+# Disable the building of the debug package(s).
+%define debug_package %{nil}
+
+# Define the filter.
+%define __find_requires sh %{_builddir}/%{buildsubdir}/filter-requires.sh
+
+%description
+Open vSwitch Linux kernel module.
+
+%prep
+%setup -q -c -T -a 0
+for kvariant in %{kvariants} ; do
+ %{__cp} -a %{kmod_name}-%{version} _kmod_build_$kvariant
+done
+echo "/usr/lib/rpm/redhat/find-requires | %{__sed} -e '/^ksym.*/d'" > filter-requires.sh
+echo "override %{kmod_name} * weak-updates/%{kmod_name}" > kmod-%{kmod_name}.conf
+
+%build
+for kvariant in %{kvariants} ; do
+ KSRC=%{_usrsrc}/kernels/%{kversion}${kvariant:+-$kvariant}-%{_target_cpu}
+ cd _kmod_build_$kvariant
+ ../openvswitch-%{version}/configure --with-l26="$KSRC"
+ %{__make} -C datapath/linux-2.6 %{?_smp_mflags}
+ cd ..
+done
+
+%install
+%{__rm} -rf %{buildroot}
+export INSTALL_MOD_PATH=%{buildroot}
+export INSTALL_MOD_DIR=extra/%{kmod_name}
+for kvariant in %{kvariants} ; do
+ KSRC=%{_usrsrc}/kernels/%{kversion}${kvariant:+-$kvariant}-%{_target_cpu}
+ %{__make} -C "${KSRC}" modules_install M=$PWD/_kmod_build_$kvariant/datapath/linux-2.6
+done
+%{__install} -d %{buildroot}%{_sysconfdir}/depmod.d/
+%{__install} kmod-%{kmod_name}.conf %{buildroot}%{_sysconfdir}/depmod.d/
+# Set the module(s) to be executable, so that they will be stripped when packaged.
+find %{buildroot} -type f -name \*.ko -exec %{__chmod} u+x \{\} \;
+
+%clean
+%{__rm} -rf %{buildroot}
--- /dev/null
+# Spec file for Open vSwitch kernel modules on Red Hat Enterprise
+# Linux 6.
+
+# Copyright (C) 2011 Nicira Networks, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+Name: openvswitch
+Version: @VERSION@
+Release: 1%{?dist}
+Summary: Open vSwitch kernel module
+
+Group: System/Kernel
+License: GPLv2
+URL: http://openvswitch.org/
+Source0: %{name}-%{version}.tar.gz
+BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX)
+BuildRequires: %kernel_module_package_buildreqs
+
+# Without this we get an empty openvswitch-debuginfo package (whose name
+# conflicts with the openvswitch-debuginfo package for OVS userspace).
+%undefine _enable_debug_packages
+
+# Uncomment to build "debug" packages
+#kernel_module_package default debug
+
+# Build only for standard kernel variant(s)
+%kernel_module_package default
+
+%description
+Open vSwitch Linux kernel module.
+
+%prep
+
+%setup
+
+%build
+for flavor in %flavors_to_build; do
+ mkdir _$flavor
+ (cd _$flavor && ../configure --with-l26="%{kernel_source $flavor}")
+ %{__make} -C _$flavor/datapath/linux-2.6 %{?_smp_mflags}
+done
+
+%install
+export INSTALL_MOD_PATH=$RPM_BUILD_ROOT
+export INSTALL_MOD_DIR=extra/%{name}
+for flavor in %flavors_to_build ; do
+ make -C %{kernel_source $flavor} modules_install \
+ M=$PWD/_$flavor/datapath/linux-2.6
+done
+
+%clean
+rm -rf $RPM_BUILD_ROOT
--- /dev/null
+# Spec file for Open vSwitch on Red Hat Enterprise Linux.
+
+# Copyright (C) 2009, 2010, 2011 Nicira Networks, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved. This file is offered as-is,
+# without warranty of any kind.
+
+Name: openvswitch
+Summary: Open vSwitch daemon/database/utilities
+Group: System Environment/Daemons
+URL: http://www.openvswitch.org/
+Vendor: Nicira Networks, Inc.
+Version: @VERSION@
+
+License: ASL 2.0
+Release: 1
+Source: openvswitch-%{version}.tar.gz
+Buildroot: /tmp/openvswitch-rpm
+Requires: openvswitch-kmod, logrotate, python
+
+%description
+Open vSwitch provides standard network bridging functions and
+support for the OpenFlow protocol for remote per-flow control of
+traffic.
+
+%prep
+%setup -q
+
+%build
+./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --enable-ssl %{?build_number}
+make %{_smp_mflags}
+
+%install
+rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=$RPM_BUILD_ROOT
+install -d -m 755 $RPM_BUILD_ROOT/etc
+install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
+install -m 755 rhel/etc_init.d_openvswitch \
+ $RPM_BUILD_ROOT/etc/init.d/openvswitch
+install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
+install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
+install -m 755 rhel/etc_logrotate.d_openvswitch \
+ $RPM_BUILD_ROOT/etc/logrotate.d/openvswitch
+install -d -m 755 $RPM_BUILD_ROOT/usr/share/openvswitch/scripts
+install -m 755 rhel/usr_share_openvswitch_scripts_sysconfig.template \
+ $RPM_BUILD_ROOT/usr/share/openvswitch/scripts/sysconfig.template
+install xenserver/uuid.py $RPM_BUILD_ROOT/usr/share/openvswitch/python
+
+# Get rid of stuff we don't want to make RPM happy.
+rm \
+ $RPM_BUILD_ROOT/usr/bin/ovs-controller \
+ $RPM_BUILD_ROOT/usr/bin/ovs-pki \
+ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
+ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8 \
+ $RPM_BUILD_ROOT/usr/sbin/ovs-vlan-bug-workaround \
+ $RPM_BUILD_ROOT/usr/share/man/man8/ovs-vlan-bug-workaround.8
+
+install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%post
+# Create default or update existing /etc/sysconfig/openvswitch.
+SYSCONFIG=/etc/sysconfig/openvswitch
+TEMPLATE=/usr/share/openvswitch/scripts/sysconfig.template
+if [ ! -e $SYSCONFIG ]; then
+ cp $TEMPLATE $SYSCONFIG
+else
+ for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
+ do
+ if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
+ echo >> $SYSCONFIG
+ sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
+ fi
+ done
+fi
+
+# Ensure all required services are set to run
+/sbin/chkconfig --add openvswitch
+/sbin/chkconfig openvswitch on
+
+%preun
+if [ "$1" = "0" ]; then # $1 = 0 for uninstall
+ /sbin/service openvswitch stop
+ /sbin/chkconfig --del openvswitch
+fi
+
+%postun
+if [ "$1" = "0" ]; then # $1 = 0 for uninstall
+ rm -f /etc/openvswitch/conf.db
+ rm -f /etc/sysconfig/openvswitch
+ rm -f /etc/openvswitch/vswitchd.cacert
+fi
+
+exit 0
+
+%files
+%defattr(-,root,root)
+/etc/init.d/openvswitch
+/etc/logrotate.d/openvswitch
+/usr/bin/ovs-appctl
+/usr/bin/ovs-dpctl
+/usr/bin/ovs-ofctl
+/usr/bin/ovs-pcap
+/usr/bin/ovs-tcpundump
+/usr/bin/ovs-vlan-test
+/usr/bin/ovs-vsctl
+/usr/bin/ovsdb-client
+/usr/bin/ovsdb-tool
+/usr/sbin/ovs-brcompatd
+/usr/sbin/ovs-vswitchd
+/usr/sbin/ovsdb-server
+/usr/share/man/man1/ovs-pcap.1.gz
+/usr/share/man/man1/ovs-tcpundump.1.gz
+/usr/share/man/man1/ovsdb-client.1.gz
+/usr/share/man/man1/ovsdb-server.1.gz
+/usr/share/man/man1/ovsdb-tool.1.gz
+/usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
+/usr/share/man/man8/ovs-appctl.8.gz
+/usr/share/man/man8/ovs-brcompatd.8.gz
+/usr/share/man/man8/ovs-ctl.8.gz
+/usr/share/man/man8/ovs-dpctl.8.gz
+/usr/share/man/man8/ovs-ofctl.8.gz
+/usr/share/man/man8/ovs-parse-leaks.8.gz
+/usr/share/man/man8/ovs-vlan-test.8.gz
+/usr/share/man/man8/ovs-vsctl.8.gz
+/usr/share/man/man8/ovs-vswitchd.8.gz
+/usr/share/openvswitch/python/
+/usr/share/openvswitch/scripts/ovs-ctl
+/usr/share/openvswitch/scripts/ovs-lib.sh
+/usr/share/openvswitch/scripts/ovs-save
+/usr/share/openvswitch/scripts/sysconfig.template
+/usr/share/openvswitch/vswitch.ovsschema
+/var/lib/openvswitch
--- /dev/null
+### Configuration options for openvswitch
+
+# Copyright (C) 2009, 2010, 2011 Nicira Networks, Inc.
+
+# FORCE_COREFILES: If 'yes' then core files will be enabled.
+# FORCE_COREFILES=yes
+
+# OVSDB_SERVER_PRIORITY: "nice" priority at which to run ovsdb-server.
+#
+# OVSDB_SERVER_PRIORITY=-10
+
+# VSWITCHD_PRIORITY: "nice" priority at which to run ovs-vswitchd.
+# VSWITCHD_PRIORITY=-10
+
+# VSWITCHD_MLOCKALL: Whether to pass ovs-vswitchd the --mlockall option.
+# This option should be set to "yes" or "no". The default is "yes".
+# Enabling this option can avoid networking interruptions due to
+# system memory pressure in extraordinary situations, such as multiple
+# concurrent VM import operations.
+# VSWITCHD_MLOCKALL=yes
projects / openvswitch / commitdiff