### END INIT INFO
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
-DAEMON=/usr/sbin/ovs-openflowd
-NAME=ovs-openflowd
-DESC=ovs-openflowd
+ovs_vswitchd=/usr/sbin/ovs-vswitchd
+ovsdb_server=/usr/bin/ovsdb-server
-test -x $DAEMON || exit 0
+(test -x $ovsdb_server && test -x $ovs_vswitchd) || exit 0
-NICIRA_OUI="002320"
-
-LOGDIR=/var/log/openvswitch
-PIDFILE=/var/run/$NAME.pid
-DHCLIENT_PIDFILE=/var/run/dhclient.of0.pid
DODTIME=1 # Time to wait for the server to die, in seconds
# If this value is set too low you might not
# let some servers to die gracefully and
# 'restart' will not work
# Include ovs-openflowd defaults if available
-unset NETDEVS
-unset MODE
-unset SWITCH_IP
-unset CONTROLLER
-unset PRIVKEY
-unset CERT
-unset CACERT
-unset CACERT_MODE
-unset MGMT_VCONNS
-unset COMMANDS
-unset DAEMON_OPTS
+unset OVSDB_SERVER_OPTS
+unset OVS_VSWITCHD_OPTS
unset CORE_LIMIT
-unset DATAPATH_ID
default=/etc/default/openvswitch-switch
if [ -f $default ] ; then
. $default
set -e
+# running_pid pid name
+#
+# Check if 'pid' is a process named 'name'
running_pid()
{
- # Check if a given process pid's cmdline matches a given name
- pid=$1
- name=$2
+ local pid=$1 name=$2
[ -z "$pid" ] && return 1
[ ! -d /proc/$pid ] && return 1
cmd=`cat /proc/$pid/cmdline | tr "\000" "\n"|head -n 1 |cut -d : -f 1`
esac
}
+# running name
+#
+# Checks for a running process named 'name' by looking for a pidfile
+# named /var/run/${name}.pid
running()
{
-# Check if the process is running looking at /proc
-# (works for all users)
+ local name=$1
+ local pidfile=/var/run/${name}.pid
# No pidfile, probably no daemon present
- [ ! -f "$PIDFILE" ] && return 1
+ [ ! -f "$pidfile" ] && return 1
+
# Obtain the pid and check it against the binary name
- pid=`cat $PIDFILE`
- running_pid $pid $NAME || return 1
+ pid=`cat $pidfile`
+ running_pid $pid $name || return 1
return 0
}
+# force_stop name
+#
+# Checks for a running process named 'name', by looking for a pidfile
+# named /var/run/${name}.pid, and then kills it and waits for it to
+# die.
force_stop() {
-# Forcefully kill the process
- [ ! -f "$PIDFILE" ] && return
- if running ; then
- kill -15 $pid
- # Is it really dead?
+ local name=$1
+ local pidfile=/var/run/${name}.pid
+
+ [ ! -f "$pidfile" ] && return
+ if running $name; then
+ kill $pid
[ -n "$DODTIME" ] && sleep "$DODTIME"s
- if running ; then
- kill -9 $pid
+ if running $name; then
+ kill -KILL $pid
[ -n "$DODTIME" ] && sleep "$DODTIME"s
- if running ; then
- echo "Cannot kill $NAME (pid=$pid)!"
+ if running $name; then
+ echo "Cannot kill $name (pid=$pid)!"
exit 1
fi
fi
fi
- rm -f $PIDFILE
+ rm -f $pidfile
return 0
}
fi
}
-configure_ssl() {
- if (test "$CACERT_MODE" != secure && test "$CACERT_MODE" != bootstrap) \
- || test ! -e "$PRIVKEY" || test ! -e "$CERT" \
- || (test ! -e "$CACERT" && test "$CACERT_MODE" != bootstrap); then
- if test "$CACERT_MODE" != secure && test "$CACERT_MODE" != bootstrap
- then
- echo "CACERT_MODE is not set to 'secure' or 'bootstrap'"
- fi
- if test ! -e "$PRIVKEY"; then
- echo "$PRIVKEY: private key missing" >&2
- fi
- if test ! -e "$CERT"; then
- echo "$CERT: certificate for private key missing" >&2
- fi
- if test ! -e "$CACERT" && test "$CACERT_MODE" != bootstrap; then
- echo "$CACERT: CA certificate missing (and CA certificate bootstrapping not enabled)" >&2
- fi
- echo "Run ovs-switch-setup (in the openvswitch-switch-config package) or edit /etc/default/openvswitch-switch to configure" >&2
- if test "$MODE" = discovery; then
- echo "You may also delete or rename $PRIVKEY to disable SSL requirement" >&2
- fi
- exit 1
- fi
+# is_module_loaded module
+#
+# Returns 0 if 'module' is loaded, 1 otherwise.
- SSL_OPTS="--private-key=$PRIVKEY --certificate=$CERT"
- if test ! -e "$CACERT" && test "$CACERT_MODE" = bootstrap; then
- SSL_OPTS="$SSL_OPTS --bootstrap-ca-cert=$CACERT"
- else
- SSL_OPTS="$SSL_OPTS --ca-cert=$CACERT"
- fi
+is_module_loaded() {
+ local module=$1
+ grep -q "^$module " /proc/modules
}
-check_int_var() {
- eval value=\$$1
- if test -n "$value"; then
- if expr "X$value" : 'X[0-9][0-9]*$' > /dev/null 2>&1; then
- if test $value -lt $2; then
- echo "warning: The $1 option may not be set to a value below $2, treating as $2" >&2
- eval $1=$2
- fi
+# load_module module
+#
+# Loads 'module' into the running kernel, if it is not already loaded.
+load_module() {
+ local module=$1
+ echo -n "Loading $module: "
+ if is_module_loaded $module; then
+ echo "already loaded, nothing to do."
+ elif modprobe $module; then
+ echo "success."
+ else
+ echo "ERROR."
+ echo "$module has probably not been built for this kernel."
+ if ! test -d /usr/share/doc/openvswitch-datapath-source; then
+ echo "Install the openvswitch-datapath-source package, then read"
+ echo "/usr/share/doc/openvswitch-datapath-source/README.Debian"
else
- echo "warning: The $1 option must be set to a number, ignoring" >&2
- unset $1
+ echo "For instructions, read"
+ echo "/usr/share/doc/openvswitch-datapath-source/README.Debian"
fi
+ exit 1
fi
}
-check_new_option() {
- case $DAEMON_OPTS in
- *$1*)
- echo "warning: The $1 option in DAEMON_OPTS may now be set with the $2 variable in $default. The setting in DAEMON_OPTS will override the $2 variable, which will prevent the switch UI from configuring $1." >&2
- ;;
- esac
-}
-
-case "$1" in
- start)
- if test -z "$NETDEVS"; then
- echo "$default: No network devices configured, switch disabled" >&2
- echo "Run ovs-switch-setup (in the openvswitch-switch-config package) or edit /etc/default/openvswitch-switch to configure" >&2
- exit 0
- fi
- if test "$MODE" = discovery; then
- unset CONTROLLER
- elif test "$MODE" = in-band || test "$MODE" = out-of-band; then
- if test -z "$CONTROLLER"; then
- echo "$default: No controller configured and not configured for discovery, switch disabled" >&2
- echo "Run ovs-switch-setup (in the openvswitch-switch-config package) or edit /etc/default/openvswitch-switch to configure" >&2
- exit 0
- fi
- else
- echo "$default: MODE must set to 'discovery', 'in-band', or 'out-of-band'" >&2
- echo "Run ovs-switch-setup (in the openvswitch-switch-config package) or edit /etc/default/openvswitch-switch to configure" >&2
- exit 1
- fi
- : ${PRIVKEY:=/etc/openvswitch-switch/of0-privkey.pem}
- : ${CERT:=/etc/openvswitch-switch/of0-cert.pem}
- : ${CACERT:=/etc/openvswitch-switch/cacert.pem}
- case $CONTROLLER in
- '')
- # Discovery mode.
- if test -e "$PRIVKEY"; then
- configure_ssl
- fi
- ;;
- tcp:*)
- ;;
- ssl:*)
- configure_ssl
- ;;
- *)
- echo "$default: CONTROLLER must be in the form 'ssl:IP[:PORT]' or 'tcp:IP[:PORT]' when not in discovery mode" >&2
- echo "Run ovs-switch-setup (in the openvswitch-switch-config package) or edit /etc/default/openvswitch-switch to configure" >&2
- exit 1
- esac
- case $DISCONNECTED_MODE in
- ''|switch|drop) ;;
- *) echo "$default: warning: DISCONNECTED_MODE is not 'switch' or 'drop'" >&2 ;;
- esac
-
- check_int_var RATE_LIMIT 100
- check_int_var INACTIVITY_PROBE 5
- check_int_var MAX_BACKOFF 1
-
- check_new_option --fail DISCONNECTED_MODE
- check_new_option --stp STP
- check_new_option --rate-limit RATE_LIMIT
- check_new_option --inactivity INACTIVITY_PROBE
- check_new_option --max-backoff MAX_BACKOFF
- case $DAEMON_OPTS in
- *--rate-limit*)
- echo "$default: --rate-limit may now be set with RATE_LIMIT" >&2
- esac
-
- echo -n "Loading openvswitch_mod: "
- if grep -q '^openvswitch_mod$' /proc/modules; then
- echo "already loaded, nothing to do."
- elif modprobe openvswitch_mod; then
+# unload_module module
+#
+# Unloads 'module' from the running kernel, if it is loaded.
+unload_module() {
+ local module=$1
+ echo -n "Unloading $module: "
+ if is_module_loaded $module; then
+ if rmmod $module; then
echo "success."
else
echo "ERROR."
- echo "openvswitch_mod has probably not been built for this kernel."
- if ! test -d /usr/share/doc/openvswitch-datapath-source; then
- echo "Install the openvswitch-datapath-source package, then read"
- echo "/usr/share/doc/openvswitch-datapath-source/README.Debian"
- else
- echo "For instructions, read"
- echo "/usr/share/doc/openvswitch-datapath-source/README.Debian"
- fi
exit 1
fi
+ else
+ echo "not loaded, nothing to do."
+ fi
+}
- echo -n "Loading ip_gre_mod: "
- if grep -q '^ip_gre$' /proc/modules; then
- modprobe -r ip_gre
- fi
- if grep -q '^ip_gre_mod$' /proc/modules; then
- echo "already loaded, nothing to do."
- elif modprobe ip_gre_mod; then
- echo "success."
- else
- echo "could not find module."
- fi
-
- for netdev in $NETDEVS; do
- check_op "Removing IP address from $netdev" ifconfig $netdev 0.0.0.0
- done
-
- must_succeed "Creating datapath" ovs-dpctl add-dp of0 $NETDEVS
-
- xx='[0-9abcdefABCDEF][0-9abcdefABCDEF]'
- case $DATAPATH_ID in
- '')
- # Check if the DMI System UUID contains a Nicira mac address
- # that should be used for this datapath. The UUID is assumed
- # to be RFC 4122 compliant.
- DMIDECODE=`which dmidecode`
- if [ -n $DMIDECODE ]; then
- UUID_MAC=`$DMIDECODE -s system-uuid | cut -d'-' -f 5`
- case $UUID_MAC in
- $NICIRA_OUI*)
- ifconfig of0 down
- must_succeed "Setting of0 MAC address to $UUID_MAC" ifconfig of0 hw ether $UUID_MAC
- ifconfig of0 up
- ;;
- esac
- fi
- ;;
- $xx:$xx:$xx:$xx:$xx:$xx)
- ifconfig of0 down
- must_succeed "Setting of0 MAC address to $DATAPATH_ID" ifconfig of0 hw ether $DATAPATH_ID
- ifconfig of0 up
- ;;
- *)
- echo "DATAPATH_ID is not a valid MAC address in the form XX:XX:XX:XX:XX:XX, ignoring" >&2
- ;;
- esac
-
- if test "$MODE" = in-band; then
- if test "$SWITCH_IP" = dhcp; then
- must_succeed "Temporarily disabling of0" ifconfig of0 down
+unload_modules() {
+ if is_module_loaded openvswitch_mod; then
+ for dp in $(ovs-dpctl dump-dps); do
+ echo -n "Deleting datapath $dp: "
+ if ovs-dpctl del-dp $dp; then
+ echo "success."
else
- COMMAND="ifconfig of0 $SWITCH_IP"
- if test -n "$SWITCH_NETMASK"; then
- COMMAND="$COMMAND netmask $SWITCH_NETMASK"
- fi
- must_succeed "Configuring of0: $COMMAND" $COMMAND
- if test -n "$SWITCH_GATEWAY"; then
- # This can fail because the route already exists,
- # so we don't insist that it succeed.
- COMMAND="route add default gw $SWITCH_GATEWAY"
- check_op "Adding default route: $COMMAND" $COMMAND
- fi
+ echo "ERROR."
fi
- else
- must_succeed "Disabling of0" ifconfig of0 down
- fi
+ done
+ fi
+ unload_module openvswitch_mod
+ unload_module ip_gre_mod
+}
+
+case "$1" in
+ start)
+ load_module openvswitch_mod
+ unload_module ip_gre
+ load_module ip_gre_mod
if test -n "$CORE_LIMIT"; then
check_op "Setting core limit to $CORE_LIMIT" ulimit -c "$CORE_LIMIT"
fi
- # Compose ovs-openflowd options.
+ # Start ovsdb-server.
set --
set -- "$@" --verbose=ANY:console:emer --verbose=ANY:syslog:err
set -- "$@" --log-file
- set -- "$@" --detach --pidfile=$PIDFILE
- for vconn in $MGMT_VCONNS; do
- set -- "$@" --listen="$vconn"
- done
- if test -n "$COMMANDS"; then
- set -- "$@" --command-acl="$COMMANDS"
- fi
- case $STP in
- yes) set -- "$@" --stp ;;
- no) set -- "$@" --no-stp ;;
- esac
- case $DISCONNECTED_MODE in
- switch) set -- "$@" --fail=open ;;
- drop) set -- "$@" --fail=closed ;;
- esac
- if test -n "$RATE_LIMIT"; then
- set -- "$@" --rate-limit=$RATE_LIMIT
- fi
- if test -n "$INACTIVITY_PROBE"; then
- set -- "$@" --inactivity-probe=$INACTIVITY_PROBE
- fi
- if test -n "$MAX_BACKOFF"; then
- set -- "$@" --max-backoff=$MAX_BACKOFF
- fi
- set -- "$@" $SSL_OPTS $DAEMON_OPTS
- if test "$MODE" = out-of-band; then
- set -- "$@" --out-of-band
- fi
- set -- "$@" of0 "$CONTROLLER"
- echo -n "Starting $DESC: "
- start-stop-daemon --start --quiet --pidfile $PIDFILE \
- --exec $DAEMON -- "$@"
- if running; then
- echo "$NAME."
+ set -- "$@" --detach --pidfile
+ set -- "$@" --listen punix:/var/run/ovsdb-server
+ set -- "$@" /etc/openvswitch-switch/conf
+ set -- "$@" $OVSDB_SERVER_OPTS
+ echo -n "Starting ovsdb-server: "
+ start-stop-daemon --start --quiet --pidfile /var/run/ovsdb-server.pid \
+ --exec $ovsdb_server -- "$@"
+ if running ovsdb-server; then
+ echo "ovsdb-server."
else
echo " ERROR."
fi
- if test "$MODE" = in-band && test "$SWITCH_IP" = dhcp; then
- echo -n "Starting dhclient on of0: "
- start-stop-daemon --start --quiet --pidfile $DHCLIENT_PIDFILE \
- --exec /sbin/dhclient -- -q -pf $DHCLIENT_PIDFILE of0
- if running; then
- echo "dhclient."
- else
- echo " ERROR."
- fi
+ # Start ovs-vswitchd.
+ set --
+ set -- "$@" --verbose=ANY:console:emer --verbose=ANY:syslog:err
+ set -- "$@" --log-file
+ set -- "$@" --detach --pidfile
+ set -- "$@" unix:/var/run/ovsdb-server
+ set -- "$@" $OVS_VSWITCHD_OPTS
+ echo -n "Starting ovs-vswitchd: "
+ start-stop-daemon --start --quiet --pidfile /var/run/ovs-vswitchd.pid \
+ --exec $ovs_vswitchd -- "$@"
+ if running ovs-vswitchd; then
+ echo "ovs-vswitchd."
+ else
+ echo " ERROR."
fi
;;
stop)
- if test -e /var/run/dhclient.of0.pid; then
- echo -n "Stopping dhclient on of0: "
- start-stop-daemon --stop --quiet --oknodo \
- --pidfile $DHCLIENT_PIDFILE --exec /sbin/dhclient
- echo "dhclient."
- fi
+ echo -n "Stopping ovs-vswitchd: "
+ start-stop-daemon --stop --quiet --oknodo \
+ --pidfile /var/run/ovs-vswitchd.pid \
+ --exec $ovs_vswitchd
+ echo "ovs-vswitchd."
- echo -n "Stopping $DESC: "
- start-stop-daemon --stop --quiet --oknodo --pidfile $PIDFILE \
- --exec $DAEMON
- echo "$NAME."
+ echo -n "Stopping ovsdb-server: "
+ start-stop-daemon --stop --quiet --oknodo \
+ --pidfile /var/run/ovsdb-server.pid \
+ --exec $ovsdb_server
+ echo "ovsdb-server."
- check_op "Deleting datapath" ovs-dpctl del-dp of0
- echo -n "Unloading ip_gre module: "
- if modprobe -r ip_gre_mod; then
- echo "success."
- fi
- check_op "Unloading kernel module" modprobe -r openvswitch_mod
+ unload_modules
;;
force-stop)
- echo -n "Forcefully stopping $DESC: "
- force_stop
- if ! running; then
- echo "$NAME."
+ echo -n "Forcefully stopping ovs-vswitchd: "
+ force_stop ovs-vswitchd
+ if ! running ovs-vswitchd; then
+ echo "ovs-vswitchd."
else
echo " ERROR."
fi
+
+ echo -n "Forcefully stopping ovsdb-server: "
+ force_stop ovsdb-server
+ if ! running ovsdb-server; then
+ echo "ovsdb-server."
+ else
+ echo " ERROR."
+ fi
+
+ unload_modules
;;
reload)
;;
force-reload)
- start-stop-daemon --stop --test --quiet --pidfile \
- $PIDFILE --exec $DAEMON \
- && $0 restart \
- || exit 0
+ # Nothing to do, since ovs-vswitchd automatically reloads
+ # whenever its configuration changes, and ovsdb-server doesn't
+ # have anything to reload.
;;
restart)
$0 stop || true
$0 start
;;
status)
- echo -n "$NAME is "
- if running ; then
- echo "running"
- else
- echo " not running."
- exit 1
- fi
+ for daemon in ovs-vswitchd ovsdb-server; do
+ echo -n "$daemon is "
+ if running $daemon; then
+ echo "running"
+ else
+ echo " not running."
+ exit 1
+ fi
+ done
;;
*)
N=/etc/init.d/$NAME
# uncomment them. Afterward, the switch will come up
# automatically at boot time. It can be started immediately with
# /etc/init.d/openvswitch-switch start
-# Alternatively, use the ovs-switch-setup program (from the
-# openvswitch-switch-config package) to do everything automatically.
-# NETDEVS: Which network devices should the OpenFlow switch include?
-#
-# List the network devices that should become part of the OpenFlow
-# switch, separated by spaces. At least two devices must be selected
-# for this machine to be a useful switch. Unselecting all network
-# devices will disable the OpenFlow switch entirely.
-#
-# The network devices that you select should not be configured with IP
-# or IPv6 addresses, even if the switch contacts the controller over
-# one of the selected network devices. This is because a running
-# Open vSwitch switch takes over network devices at a low level: they
-# become part of the switch and cannot be used for other purposes.
-#NETDEVS=""
-
-# MODE: The OpenFlow switch has three modes that determine how it
-# reaches the controller:
-#
-# * in-band with discovery: A single network is used for OpenFlow
-# traffic and other data traffic; that is, the switch contacts the
-# controller over one of the network devices selected as OpenFlow
-# switch ports. The switch automatically determines the location of
-# the controller using a DHCP request with an OpenFlow-specific
-# vendor option. This is the most common case.
-#
-# * in-band: As above, but the location of the controller is manually
-# configured.
-#
-# * out-of-band: OpenFlow traffic uses a network separate from the
-# data traffic that it controls. If this is the case, the control
-# network must already be configured on a network device other than
-# one of those selected as an Open vSwitch switch port in the previous
-# question.
-#
-# Set MODE to 'discovery', 'in-band', or 'out-of-band' for these
-# respective cases.
-MODE=discovery
-
-# SWITCH_IP: In 'in-band' mode, the switch's IP address may be
-# configured statically or dynamically:
-#
-# * For static configuration, specify the switch's IP address as a
-# string. In this case you may also set SWITCH_NETMASK and
-# SWITCH_GATEWAY appropriately (see below).
-#
-# * For dynamic configuration with DHCP (the most common case),
-# specify "dhcp". Configuration with DHCP will only work reliably
-# if the network topology allows the switch to contact the DHCP
-# server before it connects to the OpenFlow controller.
-#
-# This setting has no effect unless MODE is set to 'in-band'.
-SWITCH_IP=dhcp
-
-# SWITCH_NETMASK: IP netmask to use in 'in-band' mode when the switch
-# IP address is not 'dhcp'.
-#SWITCH_NETMASK=255.255.255.0
+# OVSDB_SERVER_OPTS: Additional options to pass to ovsdb-server,
+# e.g. "--fail=open"
+OVSDB_SERVER_OPTS=
-# SWITCH_GATEWAY: IP gateway to use in 'in-band' mode when the switch
-# IP address is not 'dhcp'.
-#SWITCH_GATEWAY=192.168.1.1
-
-# CONTROLLER: Location of controller.
-# One of the following formats:
-# tcp:IP[:PORT] via TCP to PORT (default: 6633) at IP
-# ssl:IP[:PORT] via SSL to PORT (default: 6633) at IP
-# The default below assumes that the controller is running locally.
-# This setting has no effect when MODE is set to 'discovery'.
-#CONTROLLER="tcp:127.0.0.1"
-
-# PRIVKEY: Name of file containing switch's private key.
-# Required if SSL enabled.
-#PRIVKEY=/etc/openvswitch-switch/of0-privkey.pem
-
-# CERT: Name of file containing certificate for private key.
-# Required if SSL enabled.
-#CERT=/etc/openvswitch-switch/of0-cert.pem
-
-# CACERT: Name of file containing controller CA certificate.
-# Required if SSL enabled.
-#CACERT=/etc/openvswitch-switch/cacert.pem
-
-# CACERT_MODE: Two modes are available:
-#
-# * secure: The controller CA certificate named in CACERT above must exist.
-# (You must copy it manually from the PKI server or another trusted source.)
-#
-# * bootstrap: If the controller CA certificate named in CACERT above does
-# not exist, the switch will obtain it from the controller the first time
-# it connects and save a copy to the file named in CACERT. This is insecure,
-# in the same way that initial connections with ssh are insecure, but
-# it is convenient.
-#
-# Set CACERT_MODE to 'secure' or 'bootstrap' for these respective cases.
-#CACERT_MODE=secure
-
-# MGMT_VCONNS: List of vconns (space-separated) on which ovs-openflowd
-# should listen for management connections from ovs-ofctl, etc.
-# openvswitch-switchui by default connects to
-# unix:/var/run/ovs-openflowd.mgmt, so do not disable this if you want to
-# use openvswitch-switchui.
-MGMT_VCONNS="punix:/var/run/ovs-openflowd.mgmt"
-
-# COMMANDS: Access control list for the commands that can be executed
-# remotely over the OpenFlow protocol, as a comma-separated list of
-# shell glob patterns. Negative patterns (beginning with !) act as a
-# blacklist. To be executable, a command name must match one positive
-# pattern and not match any negative patterns.
-#COMMANDS="reboot,update"
-
-# DISCONNECTED_MODE: Switch behavior when attempts to connect to the
-# controller repeatedly fail, either 'switch', to act as an L2 switch
-# in this case, or 'drop', to drop all packets (except those necessary
-# to connect to the controller). If unset, the default is 'drop'.
-#DISCONNECTED_MODE=switch
-
-# STP: Enable or disabled 802.1D-1998 Spanning Tree Protocol. Set to
-# 'yes' to enable STP, 'no' to disable it. If unset, ovs-openflowd's
-# current default is 'no' (but this may change in the future).
-#STP=no
-
-# RATE_LIMIT: Maximum number of received frames, that do not match any
-# existing switch flow, to forward up to the controller per second.
-# The valid range is 100 and up. If unset, this rate will not be
-# limited.
-#RATE_LIMIT=1000
-
-# INACTIVITY_PROBE: The maximum number of seconds of inactivity on the
-# controller connection before ovs-openflowd sends an inactivity probe
-# message to the controller. The valid range is 5 and up. If unset,
-# ovs-openflowd defaults to 5 seconds.
-#INACTIVITY_PROBE=5
-
-# MAX_BACKOFF: The maximum time that ovs-openflowd will wait between
-# attempts to connect to the controller. The valid range is 1 and up.
-# If unset, ovs-openflowd defaults to 8 seconds.
-#MAX_BACKOFF=8
-
-# DAEMON_OPTS: Additional options to pass to ovs-openflowd, e.g. "--fail=open"
-DAEMON_OPTS=""
+# OVS_VSWITCHD_OPTS: Additional options to pass to ovs-openflowd,
+# e.g. "--fail=open"
+OVS_VSWITCHD_OPTS=
# CORE_LIMIT: Maximum size for core dumps.
#
# will disable core dumps. Setting it to "unlimited" will dump all
# core files regardless of size.
#CORE_LIMIT=unlimited
-
-# DATAPATH_ID: Identifier for this switch.
-#
-# By default, the switch checks if the DMI System UUID contains a Nicira
-# mac address to use as a datapath ID. If not, then the switch generates
-# a new, random datapath ID every time it starts up. By setting this
-# value, the supplied datapath ID will always be used.
-#
-# Set DATAPATH_ID to a MAC address in the form XX:XX:XX:XX:XX:XX where each
-# X is a hexadecimal digit (0-9 or a-f).
-#DATAPATH_ID=XX:XX:XX:XX:XX:XX
projects / openvswitch / commitdiff