% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2007-07-05.10}
+\def\texinfoversion{2007-07-09.17}
%
% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 2007,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
\newdimen\cornerthick \cornerthick=.3pt
\newdimen\topandbottommargin \topandbottommargin=.75in
+% Output a mark which sets \thischapter, \thissection and \thiscolor.
+% We dump everything together because we only have one kind of mark.
+% This works because we only use \botmark / \topmark, not \firstmark.
+%
+% A mark contains a subexpression of the \ifcase ... \fi construct.
+% \get*marks macros below extract the needed part using \ifcase.
+%
+% Another complication is to let the user choose whether \thischapter
+% (\thissection) refers to the chapter (section) in effect at the top
+% of a page, or that at the bottom of a page. The solution is
+% described on page 260 of The TeXbook. It involves outputting two
+% marks for the sectioning macros, one before the section break, and
+% one after. I won't pretend I can describe this better than DEK...
+\def\domark{%
+ \toks0=\expandafter{\lastchapterdefs}%
+ \toks2=\expandafter{\lastsectiondefs}%
+ \toks4=\expandafter{\prevchapterdefs}%
+ \toks6=\expandafter{\prevsectiondefs}%
+ \toks8=\expandafter{\lastcolordefs}%
+ \mark{%
+ \the\toks0 \the\toks2
+ \noexpand\or \the\toks4 \the\toks6
+ \noexpand\else \the\toks8
+ }%
+}
+% \topmark doesn't work for the very first chapter (after the title
+% page or the contents), so we use \firstmark there -- this gets us
+% the mark with the chapter defs, unless the user sneaks in, e.g.,
+% @setcolor (or @url, or @link, etc.) between @contents and the very
+% first @chapter.
+\def\gettopheadingmarks{%
+ \ifcase0\topmark\fi
+ \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
+}
+\def\getbottomheadingmarks{\ifcase1\botmark\fi}
+\def\getcolormarks{\ifcase2\topmark\fi}
+
+% Avoid "undefined control sequence" errors.
+\def\lastchapterdefs{}
+\def\lastsectiondefs{}
+\def\prevchapterdefs{}
+\def\prevsectiondefs{}
+\def\lastcolordefs{}
+
% Main output routine.
\chardef\PAGE = 255
\output = {\onepageout{\pagecontents\PAGE}}
%
% Do this outside of the \shipout so @code etc. will be expanded in
% the headline as they should be, not taken literally (outputting ''code).
+ \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
\setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+ \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
\setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
%
{%
\ifpdf
%
- % Color manipulation macros from pdfcolor.tex.
+ % Color manipulation macros based on pdfcolor.tex.
\def\cmykDarkRed{0.28 1 1 0.35}
\def\cmykBlack{0 0 0 1}
%
\def\pdfsetcolor#1{\pdfliteral{#1 k}}
- \def\setcolor#1{\mark{#1}\pdfsetcolor{#1}}
+ % Set color, and create a mark which defines \thiscolor accordingly,
+ % so that \makeheadline knows which color to restore.
+ \def\setcolor#1{%
+ \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+ \domark
+ \pdfsetcolor{#1}%
+ }
%
\def\maincolor{\cmykBlack}
\pdfsetcolor{\maincolor}
+ \edef\thiscolor{\maincolor}
+ \def\lastcolordefs{}
%
- \def\makefootline{
- \baselineskip24pt
- \line{\pdfsetcolor{\maincolor}\the\footline}}
+ \def\makefootline{%
+ \baselineskip24pt
+ \line{\pdfsetcolor{\maincolor}\the\footline}%
+ }
%
\def\makeheadline{%
- \edef\M{\topmark}
- \ifx\M\empty\let\M=\maincolor\fi
- \vbox to 0pt{\vskip-22.5pt
- \line{\vbox to8.5pt{}%
- \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\M}}\vss}%
- \nointerlineskip}
+ \vbox to 0pt{%
+ \vskip-22.5pt
+ \line{%
+ \vbox to8.5pt{}%
+ % Extract \thiscolor definition from the marks.
+ \getcolormarks
+ % Typeset the headline with \maincolor, then restore the color.
+ \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+ }%
+ \vss
+ }%
+ \nointerlineskip
+ }
%
%
\pdfcatalog{/PageMode /UseOutlines}
\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+% @evenheadingmarks top \thischapter <- chapter at the top of a page
+% @evenheadingmarks bottom \thischapter <- chapter at the bottom of a page
+%
+% The same set of arguments for:
+%
+% @oddheadingmarks
+% @evenfootingmarks
+% @oddfootingmarks
+% @everyheadingmarks
+% @everyfootingmarks
+
+\def\evenheadingmarks{\headingmarks{even}{heading}}
+\def\oddheadingmarks{\headingmarks{odd}{heading}}
+\def\evenfootingmarks{\headingmarks{even}{footing}}
+\def\oddfootingmarks{\headingmarks{odd}{footing}}
+\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
+ \headingmarks{odd}{heading}{#1} }
+\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
+ \headingmarks{odd}{footing}{#1} }
+% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
+\def\headingmarks#1#2#3 {%
+ \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
+ \global\expandafter\let\csname get#1#2marks\endcsname \temp
+}
+
+\everyheadingmarks bottom
+\everyfootingmarks bottom
% @headings double turns headings on for double-sided printing.
% @headings single turns headings on for single-sided printing.
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
-% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise.
-% However, they are not reliable, because we don't use marks.
+% Each @chapter defines these (using marks) as the number+name, number
+% and name of the chapter. Page headings and footings can use
+% these. @section does likewise.
\def\thischapter{}
+\def\thischapternum{}
+\def\thischaptername{}
\def\thissection{}
+\def\thissectionnum{}
+\def\thissectionname{}
\newcount\absseclevel % used to calculate proper heading level
\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
\def\chappager{\par\vfill\supereject}
-\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
+% Because \domark is called before \chapoddpage, the filler page will
+% get the headings for the next chapter, which is wrong. But we don't
+% care -- we just disable all headings on the filler page.
+\def\chapoddpage{%
+ \chappager
+ \ifodd\pageno \else
+ \begingroup
+ \evenheadline={\hfil}\evenfootline={\hfil}%
+ \oddheadline={\hfil}\oddfootline={\hfil}%
+ \hbox to 0pt{}%
+ \chappager
+ \endgroup
+ \fi
+}
\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
\def\Yappendixkeyword{Yappendix}
%
\def\chapmacro#1#2#3{%
+ % Insert the first mark before the heading break (see notes for \domark).
+ \let\prevchapterdefs=\lastchapterdefs
+ \let\prevsectiondefs=\lastsectiondefs
+ \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+ \gdef\thissection{}}%
+ %
+ \def\temptype{#2}%
+ \ifx\temptype\Ynothingkeyword
+ \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+ \gdef\thischapter{\thischaptername}}%
+ \else\ifx\temptype\Yomitfromtockeyword
+ \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+ \gdef\thischapter{}}%
+ \else\ifx\temptype\Yappendixkeyword
+ \toks0={#1}%
+ \xdef\lastchapterdefs{%
+ \gdef\noexpand\thischaptername{\the\toks0}%
+ \gdef\noexpand\thischapternum{\appendixletter}%
+ \gdef\noexpand\thischapter{\putwordAppendix{} \noexpand\thischapternum:
+ \noexpand\thischaptername}%
+ }%
+ \else
+ \toks0={#1}%
+ \xdef\lastchapterdefs{%
+ \gdef\noexpand\thischaptername{\the\toks0}%
+ \gdef\noexpand\thischapternum{\the\chapno}%
+ \gdef\noexpand\thischapter{\putwordChapter{} \noexpand\thischapternum:
+ \noexpand\thischaptername}%
+ }%
+ \fi\fi\fi
+ %
+ % Output the mark. Pass it through \safewhatsit, to take care of
+ % the preceding space.
+ \safewhatsit\domark
+ %
+ % Insert the chapter heading break.
\pchapsepmacro
+ %
+ % Now the second mark, after the heading break. No break points
+ % between here and the heading.
+ \let\prevchapterdefs=\lastchapterdefs
+ \let\prevsectiondefs=\lastsectiondefs
+ \domark
+ %
{%
\chapfonts \rm
%
- % Have to define \thissection before calling \donoderef, because the
+ % Have to define \lastsection before calling \donoderef, because the
% xref code eventually uses it. On the other hand, it has to be called
% after \pchapsepmacro, or the headline will change too soon.
- \gdef\thissection{#1}%
- \gdef\thischaptername{#1}%
+ \gdef\lastsection{#1}%
%
% Only insert the separating space if we have a chapter/appendix
% number, and don't print the unnumbered ``number''.
- \def\temptype{#2}%
\ifx\temptype\Ynothingkeyword
\setbox0 = \hbox{}%
\def\toctype{unnchap}%
- \gdef\thischapternum{}%
- \gdef\thischapter{#1}%
\else\ifx\temptype\Yomitfromtockeyword
\setbox0 = \hbox{}% contents like unnumbered, but no toc entry
\def\toctype{omit}%
- \gdef\thischapternum{}%
- \gdef\thischapter{}%
\else\ifx\temptype\Yappendixkeyword
\setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
\def\toctype{app}%
- \xdef\thischapternum{\appendixletter}%
- % We don't substitute the actual chapter name into \thischapter
- % because we don't want its macros evaluated now. And we don't
- % use \thissection because that changes with each section.
- %
- \xdef\thischapter{\putwordAppendix{} \appendixletter:
- \noexpand\thischaptername}%
\else
\setbox0 = \hbox{#3\enspace}%
\def\toctype{numchap}%
- \xdef\thischapternum{\the\chapno}%
- \xdef\thischapter{\putwordChapter{} \the\chapno:
- \noexpand\thischaptername}%
\fi\fi\fi
%
% Write the toc entry for this chapter. Must come before the
% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
% section number.
%
+\def\seckeyword{sec}
+%
\def\sectionheading#1#2#3#4{%
{%
% Switch to the right set of fonts.
\csname #2fonts\endcsname \rm
%
+ \def\sectionlevel{#2}%
+ \def\temptype{#3}%
+ %
+ % Insert first mark before the heading break (see notes for \domark).
+ \let\prevsectiondefs=\lastsectiondefs
+ \ifx\temptype\Ynothingkeyword
+ \ifx\sectionlevel\seckeyword
+ \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+ \gdef\thissection{\thissectionname}}%
+ \fi
+ \else\ifx\temptype\Yomitfromtockeyword
+ % Don't redefine \thissection.
+ \else\ifx\temptype\Yappendixkeyword
+ \ifx\sectionlevel\seckeyword
+ \toks0={#1}%
+ \xdef\lastsectiondefs{%
+ \gdef\noexpand\thissectionname{\the\toks0}%
+ \gdef\noexpand\thissectionnum{#4}%
+ \gdef\noexpand\thissection{\putwordSection{} \noexpand\thissectionnum:
+ \noexpand\thissectionname}%
+ }%
+ \fi
+ \else
+ \ifx\sectionlevel\seckeyword
+ \toks0={#1}%
+ \xdef\lastsectiondefs{%
+ \gdef\noexpand\thissectionname{\the\toks0}%
+ \gdef\noexpand\thissectionnum{#4}%
+ \gdef\noexpand\thissection{\putwordSection{} \noexpand\thissectionnum:
+ \noexpand\thissectionname}%
+ }%
+ \fi
+ \fi\fi\fi
+ %
+ % Output the mark. Pass it through \safewhatsit, to take care of
+ % the preceding space.
+ \safewhatsit\domark
+ %
% Insert space above the heading.
\csname #2headingbreak\endcsname
%
- % Only insert the space after the number if we have a section number.
- \def\sectionlevel{#2}%
- \def\temptype{#3}%
+ % Now the second mark, after the heading break. No break points
+ % between here and the heading.
+ \let\prevsectiondefs=\lastsectiondefs
+ \domark
%
+ % Only insert the space after the number if we have a section number.
\ifx\temptype\Ynothingkeyword
\setbox0 = \hbox{}%
\def\toctype{unn}%
- \gdef\thissection{#1}%
+ \gdef\lastsection{#1}%
\else\ifx\temptype\Yomitfromtockeyword
% for @headings -- no section number, don't include in toc,
- % and don't redefine \thissection.
+ % and don't redefine \lastsection.
\setbox0 = \hbox{}%
\def\toctype{omit}%
\let\sectionlevel=\empty
\else\ifx\temptype\Yappendixkeyword
\setbox0 = \hbox{#4\enspace}%
\def\toctype{app}%
- \gdef\thissection{#1}%
+ \gdef\lastsection{#1}%
\else
\setbox0 = \hbox{#4\enspace}%
\def\toctype{num}%
- \gdef\thissection{#1}%
+ \gdef\lastsection{#1}%
\fi\fi\fi
%
% Write the toc entry (before \donoderef). See comments in \chapmacro.
%
% Don't need to put `Contents' or `Short Contents' in the headline.
% It is abundantly clear what they are.
- \def\thischapter{}%
\chapmacro{#1}{Yomitfromtoc}{}%
%
\savepageno = \pageno
% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
% anchor), which consists of three parts:
-% 1) NAME-title - the current sectioning name taken from \thissection,
+% 1) NAME-title - the current sectioning name taken from \lastsection,
% or the anchor name.
% 2) NAME-snt - section number and type, passed as the SNT arg, or
% empty for anchors.
\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
##1}{##2}}% these are parameters of \writexrdef
}%
- \toks0 = \expandafter{\thissection}%
+ \toks0 = \expandafter{\lastsection}%
\immediate \writexrdef{title}{\the\toks0 }%
\immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
\safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout
% is a loss. Therefore, we give the text of the node name again, so it
% is as if TeX is seeing it for the first time.
\ifdim \wd1 > 0pt
- \putwordsection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+ \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
\else
% _ (for example) has to be the character _ for the purposes of the
% control sequence corresponding to the node, but it has to expand
\global\advance\floatno by 1
%
{%
- % This magic value for \thissection is output by \setref as the
+ % This magic value for \lastsection is output by \setref as the
% XREFLABEL-title value. \xrefX uses it to distinguish float
% labels (which have a completely different output format) from
% node and anchor labels. And \xrdef uses it to construct the
% lists of floats.
%
- \edef\thissection{\floatmagic=\safefloattype}%
+ \edef\lastsection{\floatmagic=\safefloattype}%
\setref{\floatlabel}{Yfloat}%
}%
\fi
% #1 is the control sequence we are passed; we expand into a conditional
% which is true if #1 represents a float ref. That is, the magic
-% \thissection value which we \setref above.
+% \lastsection value which we \setref above.
%
\def\iffloat#1{\expandafter\doiffloat#1==\finish}
%
projects / pspp / commitdiff