the end host to the Open vSwitch on port 2, instead of to the end host
on port 1, disrupting connectivity. If mirroring to a VLAN is desired
in this scenario, then the physical switch must be replaced by one
-that learns Ethernet addresses on a per-VLAN basis.
+that learns Ethernet addresses on a per-VLAN basis. In addition,
+learning should be disabled on the VLAN containing mirrored traffic.
+If this is not done then the intermediate switch will learn the MAC
+address of each end host from the mirrored traffic. If packets being
+sent to that end host are also mirrored, then they will be dropped
+since the switch will attempt to send them out the input port.
+Disabling learning for the VLAN will cause the switch to correctly
+send the packet out all ports configured for that VLAN.
.ST "Example"
The following \fBovs\-vswitchd\fR configuration copies all frames received
on \fBeth1\fR or \fBeth2\fR to \fBeth3\fR.