/* Get the interface, including the syntax bits. */
#include "regex.h"
-/* Jim Meyering writes:
+/* isalpha etc. are used for the character classes. */
+#include <ctype.h>
- "... Some ctype macros are valid only for character codes that
- isascii says are ASCII (SGI's IRIX-4.0.5 is one such system --when
- using /bin/cc or gcc but without giving an ansi option). So, all
- ctype uses should be through macros like ISPRINT... If
- STDC_HEADERS is defined, then autoconf has verified that the ctype
- macros don't need to be guarded with references to isascii. ...
- Defining isascii to 1 should let any compiler worth its salt
- eliminate the && through constant folding." */
+#ifdef emacs
-#if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
-#define ISASCII(c) 1
-#else
-#define ISASCII(c) isascii(c)
-#endif
+/* 1 if C is an ASCII character. */
+#define IS_REAL_ASCII(c) ((c) < 0200)
-/* isalpha etc. are used for the character classes. */
-#include <ctype.h>
+/* 1 if C is a unibyte character. */
+#define ISUNIBYTE(c) (SINGLE_BYTE_CHAR_P ((c)))
-/* In Emacs, these are only used for single-byte characters. */
-#define ISDIGIT(c) (ISASCII (c) && isdigit (c))
-#define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
-#define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
+/* The Emacs definitions should not be directly affected by locales. */
-#ifdef emacs
+/* In Emacs, these are only used for single-byte characters. */
+#define ISDIGIT(c) ((c) >= '0' && (c) <= '9')
+#define ISCNTRL(c) ((c) < ' ')
+#define ISXDIGIT(c) (((c) >= '0' && (c) <= '9') \
+ || ((c) >= 'a' && (c) <= 'f') \
+ || ((c) >= 'A' && (c) <= 'F'))
/* This is only used for single-byte characters. */
#define ISBLANK(c) ((c) == ' ' || (c) == '\t')
/* The rest must handle multibyte characters. */
#define ISGRAPH(c) (SINGLE_BYTE_CHAR_P (c) \
- ? ISASCII (c) && isprint (c) && !isspace (c) \
+ ? (c) > ' ' && !((c) >= 0177 && (c) <= 0237) \
: 1)
#define ISPRINT(c) (SINGLE_BYTE_CHAR_P (c) \
- ? ISASCII (c) && isalnum (c) \
+ ? (c) >= ' ' && !((c) >= 0177 && (c) <= 0237) \
: 1)
-#define ISALNUM(c) (SINGLE_BYTE_CHAR_P (c) \
- ? ISASCII (c) && isalnum (c) \
+#define ISALNUM(c) (IS_REAL_ASCII (c) \
+ ? (((c) >= 'a' && (c) <= 'z') \
+ || ((c) >= 'A' && (c) <= 'Z') \
+ || ((c) >= '0' && (c) <= '9')) \
: SYNTAX (c) == Sword)
-#define ISALPHA(c) (SINGLE_BYTE_CHAR_P (c) \
- ? ISASCII (c) && isalpha (c) \
+#define ISALPHA(c) (IS_REAL_ASCII (c) \
+ ? (((c) >= 'a' && (c) <= 'z') \
+ || ((c) >= 'A' && (c) <= 'Z')) \
: SYNTAX (c) == Sword)
#define ISLOWER(c) (LOWERCASEP (c))
-#define ISPUNCT(c) (SINGLE_BYTE_CHAR_P (c) \
- ? ISASCII (c) && ispunct (c) \
+#define ISPUNCT(c) (IS_REAL_ASCII (c) \
+ ? ((c) > ' ' && (c) < 0177 \
+ && !(((c) >= 'a' && (c) <= 'z') \
+ || ((c) >= 'A' && (c) <= 'Z') \
+ || ((c) >= '0' && (c) <= '9'))) \
: SYNTAX (c) != Sword)
#define ISSPACE(c) (SYNTAX (c) == Swhitespace)
#else /* not emacs */
+/* Jim Meyering writes:
+
+ "... Some ctype macros are valid only for character codes that
+ isascii says are ASCII (SGI's IRIX-4.0.5 is one such system --when
+ using /bin/cc or gcc but without giving an ansi option). So, all
+ ctype uses should be through macros like ISPRINT... If
+ STDC_HEADERS is defined, then autoconf has verified that the ctype
+ macros don't need to be guarded with references to isascii. ...
+ Defining isascii to 1 should let any compiler worth its salt
+ eliminate the && through constant folding." */
+
+#if defined (STDC_HEADERS) || (!defined (isascii) && !defined (HAVE_ISASCII))
+#define ISASCII(c) 1
+#else
+#define ISASCII(c) isascii(c)
+#endif
+
+/* 1 if C is an ASCII character. */
+#define IS_REAL_ASCII(c) ((c) < 0200)
+
+/* This distinction is not meaningful, except in Emacs. */
+#define ISUNIBYTE(c) 1
+
+#define ISDIGIT(c) (ISASCII (c) && isdigit (c))
+#define ISCNTRL(c) (ISASCII (c) && iscntrl (c))
+#define ISXDIGIT(c) (ISASCII (c) && isxdigit (c))
+
#ifdef isblank
#define ISBLANK(c) (ISASCII (c) && isblank (c))
#else
#define BIT_ALNUM 0x1
#define BIT_ALPHA 0x2
#define BIT_WORD 0x4
+#define BIT_ASCII 0x8
+#define BIT_NONASCII 0x10
#define BIT_GRAPH 0x20
#define BIT_LOWER 0x40
#define BIT_PRINT 0x80
#define BIT_PUNCT 0x100
#define BIT_SPACE 0x200
#define BIT_UPPER 0x400
+#define BIT_UNIBYTE 0x800
+#define BIT_MULTIBYTE 0x1000
/* Set a range (RANGE_START, RANGE_END) to WORK_AREA. */
#define SET_RANGE_TABLE_WORK_AREA(work_area, range_start, range_end) \
|| STREQ (string, "space") || STREQ (string, "print") \
|| STREQ (string, "punct") || STREQ (string, "graph") \
|| STREQ (string, "cntrl") || STREQ (string, "blank") \
- || STREQ (string, "word"))
+ || STREQ (string, "word") \
+ || STREQ (string, "ascii") || STREQ (string, "nonascii") \
+ || STREQ (string, "unibyte") || STREQ (string, "multibyte"))
\f
#ifndef MATCH_MAY_ALLOCATE
int ch;
boolean is_alnum = STREQ (str, "alnum");
boolean is_alpha = STREQ (str, "alpha");
+ boolean is_ascii = STREQ (str, "ascii");
boolean is_blank = STREQ (str, "blank");
boolean is_cntrl = STREQ (str, "cntrl");
boolean is_digit = STREQ (str, "digit");
boolean is_graph = STREQ (str, "graph");
boolean is_lower = STREQ (str, "lower");
+ boolean is_multibyte = STREQ (str, "multibyte");
+ boolean is_nonascii = STREQ (str, "nonascii");
boolean is_print = STREQ (str, "print");
boolean is_punct = STREQ (str, "punct");
boolean is_space = STREQ (str, "space");
+ boolean is_unibyte = STREQ (str, "unibyte");
boolean is_upper = STREQ (str, "upper");
- boolean is_xdigit = STREQ (str, "xdigit");
boolean is_word = STREQ (str, "word");
+ boolean is_xdigit = STREQ (str, "xdigit");
if (!IS_CHAR_CLASS (str))
FREE_STACK_RETURN (REG_ECTYPE);
if (is_alnum) bit = BIT_ALNUM;
if (is_alpha) bit = BIT_ALPHA;
+ if (is_ascii) bit = BIT_ASCII;
if (is_graph) bit = BIT_GRAPH;
if (is_lower) bit = BIT_LOWER;
+ if (is_multibyte) bit = BIT_MULTIBYTE;
+ if (is_nonascii) bit = BIT_NONASCII;
if (is_print) bit = BIT_PRINT;
if (is_punct) bit = BIT_PUNCT;
if (is_space) bit = BIT_SPACE;
+ if (is_unibyte) bit = BIT_UNIBYTE;
if (is_upper) bit = BIT_UPPER;
if (is_word) bit = BIT_WORD;
if (bit)
|| (is_upper && ISUPPER (ch))
|| (is_xdigit && ISXDIGIT (ch)))
SET_LIST_BIT (translated);
+ if ( (is_ascii && IS_REAL_ASCII (ch))
+ || (is_nonascii && !IS_REAL_ASCII (ch))
+ || (is_unibyte && ISUNIBYTE (ch))
+ || (is_multibyte && !ISUNIBYTE (ch)))
+ SET_LIST_BIT (translated);
+
if ( (is_word && ISWORD (ch)))
SET_LIST_BIT (translated);
}
if (p[j / BYTEWIDTH] & (1 << (j % BYTEWIDTH)))
fastmap[j] = 1;
- /* If we can match a syntax class, we can match
+ /* If we can match a character class, we can match
any character set. */
if (CHARSET_RANGE_TABLE_EXISTS_P (&p[-2])
&& CHARSET_RANGE_TABLE_BITS (&p[-2]) != 0)
/* Make P points the range table. */
p += CHARSET_BITMAP_SIZE (&p[-2]);
- /* Extract the number of ranges in range table into
- COUNT. */
+ /* Extract the number of ranges in range table into COUNT. */
EXTRACT_NUMBER_AND_INCR (count, p);
for (; count > 0; count--, p += 2 * 3) /* XXX */
{
if ( (class_bits & BIT_ALNUM && ISALNUM (c))
| (class_bits & BIT_ALPHA && ISALPHA (c))
+ | (class_bits & BIT_ASCII && IS_REAL_ASCII (c))
| (class_bits & BIT_GRAPH && ISGRAPH (c))
| (class_bits & BIT_LOWER && ISLOWER (c))
+ | (class_bits & BIT_MULTIBYTE && !ISUNIBYTE (c))
+ | (class_bits & BIT_NONASCII && !IS_REAL_ASCII (c))
| (class_bits & BIT_PRINT && ISPRINT (c))
| (class_bits & BIT_PUNCT && ISPUNCT (c))
| (class_bits & BIT_SPACE && ISSPACE (c))
+ | (class_bits & BIT_UNIBYTE && ISUNIBYTE (c))
| (class_bits & BIT_UPPER && ISUPPER (c))
| (class_bits & BIT_WORD && ISWORD (c)))
not = !not;
projects / pspp / commitdiff