# Invoking `pspp`
This chapter describes how to invoke `pspp`, PSPP's main command-line
-user interface.
-
-## Main Options
-
-Here is a summary of all the options, grouped by type, followed by
-explanations in the same order.
-
-In the table, arguments to long options also apply to any
-corresponding short options.
-
-```
-_Non-option arguments_
- SYNTAX-FILE
-
-_Output options_
- -o, --output=OUTPUT-FILE
- -O OPTION=VALUE
- -O format=FORMAT
- -O device={terminal|listing}
- --no-output
- --table-look=FILE
- -e, --error-file=ERROR-FILE
-
-_Language options_
- -I, --include=DIR
- -I-, --no-include
- -b, --batch
- -i, --interactive
- -r, --no-statrc
- -a, --algorithm={compatible|enhanced}
- -x, --syntax={compatible|enhanced}
- --syntax-encoding=ENCODING
-
-_Informational options_
- -h, --help
- -V, --version
-
-_Other options_
- -s, --safer
- --testing-mode
-```
-
-* `SYNTAX-FILE`
- Read and execute the named syntax file. If no syntax files are
- specified, PSPP prompts for commands. If any syntax files are
- specified, PSPP by default exits after it runs them, but you may
- make it prompt for commands by specifying `-` as an additional
- syntax file.
-
-* `-o OUTPUT-FILE`
- Write output to OUTPUT-FILE. PSPP has several different output
- drivers that support output in various formats (use `--help` to
- list the available formats). Specify this option more than once to
- produce multiple output files, presumably in different formats.
-
- Use `-` as OUTPUT-FILE to write output to standard output.
-
- If no `-o` option is used, then PSPP writes text and CSV output to
- standard output and other kinds of output to whose name is based on
- the format, e.g. `pspp.pdf` for PDF output.
-
-* `-O OPTION=VALUE`
- Sets an option for the output file configured by a preceding `-o`.
- Most options are specific to particular output formats. A few
- options that apply generically are listed below.
-
-* `-O format=FORMAT`
- PSPP uses the extension of the file name given on `-o` to select an
- output format. Use this option to override this choice by
- specifying an alternate format, e.g. `-o pspp.out -O format=html`
- to write HTML to a file named `pspp.out`. Use `--help` to list the
- available formats.
-
-* `-O device={terminal|listing}`
- Sets whether PSPP considers the output device configured by the
- preceding `-o` to be a terminal or a listing device. This affects
- what output will be sent to the device, as configured by the
- [`SET`](../commands/utilities/set.md) command's output routing
- subcommands. By default, output written to standard output is
- considered a terminal device and other output is considered a
- listing device.
-
-* `--no-output`
- Disables output entirely, if neither `-o` nor `-O` is also used.
- If one of those options is used, `--no-output` has no effect.
-
-* `--table-look=FILE`
- Reads a table style from FILE and applies it to all PSPP table
- output. The file should be a TableLook `.stt` or `.tlo` file.
- PSPP searches for FILE in the current directory, then in
- `.pspp/looks` in the user's home directory, then in a `looks`
- subdirectory inside PSPP's data directory (usually
- `/usr/local/share/pspp`). If PSPP cannot find FILE under the given
- name, it also tries adding a `.stt` extension.
-
- When this option is not specified, PSPP looks for `default.stt`
- using the algorithm above, and otherwise it falls back to a default
- built-in style.
-
- Using [`SET TLOOK`](../commands/utilities/set.md#tlook) in PSPP syntax
- overrides the style set on the command line.
-
-* `-e ERROR-FILE`
- `--error-file=ERROR-FILE`
- Configures a file to receive PSPP error, warning, and note messages
- in plain text format. Use `-` as ERROR-FILE to write messages to
- standard output. The default error file is standard output in the
- absence of these options, but this is suppressed if an output
- device writes to standard output (or another terminal), to avoid
- printing every message twice. Use `none` as ERROR-FILE to
- explicitly suppress the default.
-
-* `-I DIR`
- `--include=DIR`
- Appends DIR to the set of directories searched by the
- [`INCLUDE`](../commands/utilities/include.md) and
- [`INSERT`](../commands/utilities/insert.md) commands.
-
-* `-I-`, `--no-include`
- Clears all directories from the include path, including directories
- inserted in the include path by default. The default include path
- is `.` (the current directory), followed by `.pspp` in the user's
- home directory, followed by PSPP's system configuration directory
- (usually `/etc/pspp` or `/usr/local/etc/pspp`).
-
-* `-b`, `--batch`
- `-i`, `--interactive`
- These options forces syntax files to be interpreted in batch mode or
- interactive mode, respectively, rather than the default "auto" mode.
- See [Syntax Variants](../language/basics/syntax-variants.md), for a
- description of the differences.
-
-* `-r`, `--no-statrc`
- By default, at startup PSPP searches for a file named `rc` in the
- include path (described above) and, if it finds one, runs the
- commands in it. This option disables this behavior.
-
-* `-a {enhanced|compatible}`
- `--algorithm={enhanced|compatible}`
- With `enhanced`, the default, PSPP uses the best implemented
- algorithms for statistical procedures. With `compatible`, however,
- PSPP will in some cases use inferior algorithms to produce the same
- results as the proprietary program SPSS.
-
- Some commands have subcommands that override this setting on a per
- command basis.
-
-* `-x {enhanced|compatible}`
- `--syntax={enhanced|compatible}`
- With `enhanced`, the default, PSPP accepts its own extensions
- beyond those compatible with the proprietary program SPSS. With
- `compatible`, PSPP rejects syntax that uses these extensions.
-
-* `--syntax-encoding=ENCODING`
- Specifies ENCODING as the encoding for syntax files named on the
- command line. The ENCODING also becomes the default encoding for
- other syntax files read during the PSPP session by the
- [`INCLUDE`](../commands/utilities/include.md) and
- [`INSERT`](../commands/utilities/insert.md) commands. See
- [`INSERT`](../commands/utilities/insert.md) for the accepted forms of
- ENCODING.
-
-* `--help`
- Prints a message describing PSPP command-line syntax and the
- available device formats, then exits.
-
-* `-V`, `--version`
- Prints a brief message listing PSPP's version, warranties you don't
- have, copying conditions and copyright, and e-mail address for bug
- reports, then exits.
-
-* `-s`, `--safer`
- Disables certain unsafe operations. This includes the `ERASE` and
- `HOST` commands, as well as use of pipes as input and output files.
-
-* `--testing-mode`
- Invoke heuristics to assist with testing PSPP. For use by `make
- check` and similar scripts.
-
-## PDF, PostScript, SVG, and PNG Output Options
-
-To produce output in PDF, PostScript, SVG, or PNG format, specify `-o
-FILE` on the PSPP command line, optionally followed by any of the
-options shown in the table below to customize the output format.
-
-PDF, PostScript, and SVG use real units: each dimension among the
-options listed below may have a suffix `mm` for millimeters, `in` for
-inches, or `pt` for points. Lacking a suffix, numbers below 50 are
-assumed to be in inches and those above 50 are assumed to be in
-millimeters.
-
-PNG files are pixel-based, so dimensions in PNG output must
-ultimately be measured in pixels. For output to these files, PSPP
-translates the specified dimensions to pixels at 72 pixels per inch.
-For PNG output only, fonts are by default rendered larger than this, at
-96 pixels per inch.
-
-An SVG or PNG file can only hold a single page. When PSPP outputs
-more than one page to SVG or PNG, it creates multiple files. It outputs
-the second page to a file named with a `-2` suffix, the third with a
-`-3` suffix, and so on.
-
-* `-O format={pdf|ps|svg|png}`
- Specify the output format. This is only necessary if the file name
- given on `-o` does not end in `.pdf`, `.ps`, `.svg`, or `.png`.
-
-* `-O paper-size=PAPER-SIZE`
- Paper size, as a name (e.g. `a4`, `letter`) or measurements (e.g.
- `210x297`, `8.5x11in`).
-
- The default paper size is taken from the `PAPERSIZE` environment
- variable or the file indicated by the `PAPERCONF` environment
- variable, if either variable is set. If not, and your system
- supports the `LC_PAPER` locale category, then the default paper
- size is taken from the locale. Otherwise, if `/etc/papersize`
- exists, the default paper size is read from it. As a last resort,
- A4 paper is assumed.
-
-* `-O foreground-color=COLOR`
- Sets COLOR as the default color for lines and text. Use a CSS
- color format (e.g. `#RRGGBB`) or name (e.g. `black`) as COLOR.
-
-* `-O orientation=ORIENTATION`
- Either `portrait` or `landscape`. Default: `portrait`.
-
-* `-O left-margin=DIMENSION`
- `-O right-margin=DIMENSION`
- `-O top-margin=DIMENSION`
- `-O bottom-margin=DIMENSION`
- Sets the margins around the page. See below for the allowed forms
- of DIMENSION. Default: `0.5in`.
-
-* `-O object-spacing=DIMENSION`
- Sets the amount of vertical space between objects (such as headings
- or tables).
-
-* `-O prop-font=FONT-NAME`
- Sets the default font used for ordinary text. Most systems support
- CSS-like font names such as "Sans Serif", but a wide range of
- system-specific fonts are likely to be supported as well.
-
- Default: proportional font `Sans Serif`.
-
-* `-O font-size=FONT-SIZE`
- Sets the size of the default fonts, in thousandths of a point.
- Default: 10000 (10 point).
-
-* `-O trim=true`
- This option makes PSPP trim empty space around each page of output,
- before adding the margins. This can make the output easier to
- include in other documents.
-
-* `-O outline=BOOLEAN`
- For PDF output only, this option controls whether PSPP includes an
- outline in the output file. PDF viewers usually display the
- outline as a side bar that allows for easy navigation of the file.
- The default is true unless `-O trim=true` is also specified. (The
- Cairo graphics library that PSPP uses to produce PDF output has a
- bug that can cause a crash when outlines and trimming are used
- together.)
-
-* `-O font-resolution=DPI`
- Sets the resolution for font rendering, in dots per inch. For PDF,
- PostScript, and SVG output, the default is 72 dpi, so that a
- 10-point font is rendered with a height of 10 points. For PNG
- output, the default is 96 dpi, so that a 10-point font is rendered
- with a height of 10 / 72 * 96 = 13.3 pixels. Use a larger DPI to
- enlarge text output, or a smaller DPI to shrink it.
-
-## Plain Text Output Options
-
-PSPP can produce plain text output, drawing boxes using ASCII or Unicode
-line drawing characters. To produce plain text output, specify `-o
-FILE` on the PSPP command line, optionally followed by options from the
-table below to customize the output format.
-
-Plain text output is encoded in UTF-8.
-
-* `-O format=txt`
- Specify the output format. This is only necessary if the file name
- given on `-o` does not end in `.txt` or `.list`.
-
-* `-O charts={TEMPLATE.png|none}`
- Name for chart files included in output. The value should be a
- file name that includes a single `#` and ends in `png`. When a
- chart is output, the `#` is replaced by the chart number. The
- default is the file name specified on `-o` with the extension
- stripped off and replaced by `-#.png`.
-
- Specify `none` to disable chart output.
-
-* `-O foreground-color=COLOR`
- `-O background-color=COLOR`
- Sets COLOR as the color to be used for the background or foreground
- to be used for charts. Color should be given in the format
- `#RRRRGGGGBBBB`, where RRRR, GGGG and BBBB are 4 character
- hexadecimal representations of the red, green and blue components
- respectively. If charts are disabled, this option has no effect.
-
-* `-O width=COLUMNS`
- Width of a page, in columns. If unspecified or given as `auto`, the
- default is the width of the terminal, for interactive output, or the
- [`WIDTH`](../commands/utilities/set.md#width) setting, for output to a
- file.
-
-* `-O box={ascii|unicode}`
- Sets the characters used for lines in tables. If set to `ascii`,
- output uses use the characters `-`, `|`, and `+` for single-width
- lines and `=` and `#` for double-width lines. If set to `unicode`
- then, output uses Unicode box drawing characters. The default is
- `unicode` if the locale's character encoding is "UTF-8" or `ascii`
- otherwise.
-
-* `-O emphasis={none|bold|underline}`
- How to emphasize text. Bold and underline emphasis are achieved
- with overstriking, which may not be supported by all the software
- to which you might pass the output. Default: `none`.
-
-## SPV Output Options
-
-SPSS 16 and later write `.spv` files to represent the contents of its
-output editor. To produce output in `.spv` format, specify `-o FILE` on
-the PSPP command line, optionally followed by any of the options shown
-in the table below to customize the output format.
-
-* `-O format=spv`
- Specify the output format. This is only necessary if the file name
- given on `-o` does not end in `.spv`.
-
-* `-O paper-size=PAPER-SIZE`
- `-O left-margin=DIMENSION`
- `-O right-margin=DIMENSION`
- `-O top-margin=DIMENSION`
- `-O bottom-margin=DIMENSION`
- `-O object-spacing=DIMENSION`
- These have the same syntax and meaning as for [PDF
- output](#pdf-postscript-svg-and-png-output-options).
-
-## TeX Output Options
-
-If you want to publish statistical results in professional or academic
-journals, you will probably want to provide results in TeX format. To
-do this, specify `-o FILE` on the PSPP command line where FILE is a file
-name ending in `.tex`, or you can specify `-O format=tex`.
-
-The resulting file can be directly processed using TeX or you can
-manually edit the file to add commentary text. Alternatively, you can
-cut and paste desired sections to another TeX file.
-
-## HTML Output Options
-
-To produce output in HTML format, specify `-o FILE` on the PSPP command
-line, optionally followed by any of the options shown in the table below
-to customize the output format.
-
-* `-O format=html`
- Specify the output format. This is only necessary if the file name
- given on `-o` does not end in `.html`.
-
-* `-O charts={TEMPLATE.png|none}`
- Sets the name used for chart files. See [Plain Text Output
- Options](#plain-text-output-options), for details.
-
-* `-O borders=BOOLEAN`
- Decorate the tables with borders. If set to false, the tables
- produced will have no borders. The default value is true.
-
-* `-O bare=BOOLEAN`
- The HTML output driver ordinarily outputs a complete HTML document.
- If set to true, the driver instead outputs only what would normally
- be the contents of the `body` element. The default value is false.
-
-* `-O css=BOOLEAN`
- Use cascading style sheets. Cascading style sheets give an
- improved appearance and can be used to produce pages which fit a
- certain web site's style. The default value is true.
-
-## OpenDocument Output Options
-
-To produce output as an OpenDocument text (ODT) document, specify `-o
-FILE` on the PSPP command line. If FILE does not end in `.odt`, you
-must also specify `-O format=odt`.
-
-ODT support is only available if your installation of PSPP was
-compiled with the libxml2 library.
-
-The OpenDocument output format does not have any configurable
-options.
-
-## Comma-Separated Value Output Options
-
-To produce output in comma-separated value (CSV) format, specify `-o
-FILE` on the PSPP command line, optionally followed by any of the
-options shown in the table below to customize the output format.
-
-* `-O format=csv`
- Specify the output format. This is only necessary if the file name
- given on `-o` does not end in `.csv`.
-
-* `-O separator=FIELD-SEPARATOR`
- Sets the character used to separate fields. Default: a comma
- (`,`).
-
-* `-O quote=QUALIFIER`
- Sets QUALIFIER as the character used to quote fields that contain
- white space, the separator (or any of the characters in the
- separator, if it contains more than one character), or the quote
- character itself. If QUALIFIER is longer than one character, only
- the first character is used; if QUALIFIER is the empty string, then
- fields are never quoted.
+user interface. The `pspp` program has a number of commands, which
+are documented separately.
-* `-O titles=BOOLEAN`
- Whether table titles (brief descriptions) should be printed.
- Default: `on`.
+To see a list of commands, run `pspp --help`. For help with a
+particular command, run `pspp <command> --help`.
-* `-O captions=BOOLEAN`
- Whether table captions (more extensive descriptions) should be
- printed. Default: on.
+## Converting data files with `pspp convert`
- The CSV format used is an extension to that specified in RFC 4180:
-
-* Tables
- Each table row is output on a separate line, and each column is
- output as a field. The contents of a cell that spans multiple rows
- or columns is output only for the top-left row and column; the rest
- are output as empty fields.
+`pspp convert <INPUT> [OUTPUT]` reads an SPSS data file from `<INPUT>`
+and writes a copy of it to `[OUTPUT]` (or to the terminal, if
+`[OUTPUT]` is omitted).
-* Titles
- When a table has a title and titles are enabled, the title is
- output just above the table as a single field prefixed by `Table:`.
+If `[OUTPUT]` is specified, then `pspp convert` tries to guess the
+output format based on its extension:
-* Captions
- When a table has a caption and captions are enabled, the caption is
- output just below the table as a single field prefixed by
- `Caption:`.
+* `csv`
+ `txt`
+ Comma-separated value. Each value is formatted according to its
+ variable's print format. The first line in the file contains
+ variable names.
-* Footnotes
- Within a table, footnote markers are output as bracketed letters
- following the cell's contents, e.g. `[a]`, `[b]`, ... The
- footnotes themselves are output following the body of the table, as
- a separate two-column table introduced with a line that says
- `Footnotes:`. Each row in the table represent one footnote: the
- first column is the marker, the second column is the text.
+* `sav`
+ `sys`
+ SPSS system file.
-* Text
- Text in output is printed as a field on a line by itself. The
- TITLE and SUBTITLE produce similar output, prefixed by `Title:` or
- `Subtitle:`, respectively.
+Without an output file name, the default output format is CSV. Use
+`-O <output_format>` to override the default or to specify the format
+for unrecognized extensions.
-* Messages
- Errors, warnings, and notes are printed the same way as text.
+### Options
-* Charts
- Charts are not included in CSV output.
+`pspp convert` accepts the following general options:
-Successive output items are separated by a blank line.
+* `-O csv`
+ `-O sys`
+ Sets the output format.
+* `-e <ENCODING>`
+ `--encoding=<ENCODING>`
+ Sets the character encoding used to read text strings in the input
+ file. This is not needed for new enough SPSS data files, but older
+ data files do not identify their encoding, and PSPP cannot always
+ guess correctly.
+
+ `<ENCODING>` must be one of the labels for encodings in the
+ [Encoding Standard]. PSPP does not support UTF-16 or EBCDIC
+ encodings data files.
+
+ `pspp show encodings` can help figure out the correct encoding for a
+ system file.
+
+ [Encoding Standard]: https://encoding.spec.whatwg.org/#names-and-labels
+
+* `-c <MAX_CASES>`
+ `--cases=<MAX_CASES>`
+ By default, all cases in the input are copied to the output.
+ Specify this option to limit the number of copied cases.
+
+* `-p <PASSWORD>`
+ `--password=<PASSWORD>`
+ Specifies the password for reading an encrypted SPSS system file.
+
+ `pspp convert` reads, but does not write, encrypted system files.
+
+ > ⚠️ The password (and other command-line options) may be visible to
+ other users on multiuser systems.
+
+### System File Output Options
+
+These options only affect output to SPSS system files.
+
+* `--unicode`
+ Writes system file output with Unicode (UTF-8) encoding. If the
+ input was not already in Unicode, then this causes string variables
+ to be tripled in width.
+
+* `--compression <COMPRESSION>`
+ Writes data in the system file with the specified format of
+ compression:
+
+ - `simple`: A simple form of compression that saves space writing
+ small integer values and string segments that are all spaces. All
+ versions of SPSS support simple compression.
+
+ - `zlib`: More advanced compression that saves space in more general
+ cases. Only SPSS 21 and later can read files written with `zlib`
+ compression.
+
+### CSV Output Options
+
+These options only affect output to CSV files.
+
+* `--no-var-names`
+ By default, `pspp convert` writes the variable names as the first
+ line of output. With this option, `pspp convert` omits this line.
+
+* `--recode`
+ By default, `pspp convert` writes user-missing values to CSV output
+ files as their regular values. With this option, `pspp convert`
+ recodes them to system-missing values (which are written as a
+ single space).
+
+* `--labels`
+ By default, `pspp convert` writes variables' values to CSV output
+ files. With this option, `pspp convert` writes value labels.
+
+* `--print-formats`
+ By default, `pspp convert` writes numeric variables as plain
+ numbers. This option makes `pspp convert` honor variables' print
+ formats.
+
+* `--decimal=DECIMAL`
+ This option sets the character used as a decimal point in output.
+ The default is `.`. Only ASCII characters may be used.
+
+* `--delimiter=DELIMITER`
+ This option sets the character used to separate fields in output.
+ The default is `,`, unless the decimal point is `,`, in which case
+ `;` is used. Only ASCII characters may be used.
+
+* `--qualifier=QUALIFIER`
+ The option sets the character used to quote fields that contain the
+ delimiter. The default is `"`. Only ASCII characters may be used.
* along with this program. If not, see <http://www.gnu.org/licenses/>. */
use anyhow::{anyhow, bail, Error as AnyError, Result};
+use chrono::{Datelike, NaiveTime, Timelike};
use clap::{Args, Parser, Subcommand, ValueEnum};
use encoding_rs::Encoding;
use pspp::{
+ calendar::calendar_offset_to_gregorian,
crypto::EncryptedFile,
- data::Datum,
+ format::{DisplayPlain, Type},
output::{
driver::{Config, Driver},
pivot::PivotTable,
#[arg(short = 'e', long, value_parser = parse_encoding)]
encoding: Option<&'static Encoding>,
- /// If true, convert to Unicode (UTF-8) encoding.
- #[arg(long = "unicode")]
- to_unicode: bool,
-
/// Password for decryption, with or without what SPSS calls "password encryption".
///
/// Specify only for an encrypted system file.
/// Omit writing variable names as the first line of output.
#[arg(long)]
no_var_names: bool,
+
+ /// Writes user-missing values like system-missing values. Otherwise,
+ /// user-missing values are written the same way as non-missing values.
+ #[arg(long)]
+ recode: bool,
+
+ /// Write value labels instead of values.
+ #[arg(long)]
+ labels: bool,
+
+ /// Use print formats for numeric variables.
+ #[arg(long)]
+ print_formats: bool,
+
+ /// Decimal point.
+ #[arg(long, default_value_t = '.')]
+ decimal: char,
+
+ /// Delimiter.
+ ///
+ /// The default is `,` unless that would be the same as the decimal point,
+ /// in which case `;` is the default.
+ #[arg(long)]
+ delimiter: Option<char>,
+
+ /// Character used to quote the delimiter.
+ #[arg(long, default_value_t = '"')]
+ qualifier: char,
}
#[derive(Args, Clone, Debug)]
struct SysOptions {
+ /// Write the output file with Unicode (UTF-8) encoding.
+ ///
+ /// If the input was not already encoded in Unicode, this triples the width
+ /// of string variables.
+ #[arg(long = "unicode")]
+ to_unicode: bool,
+
/// How to compress data in the system file.
#[arg(long, default_value = "simple")]
compression: Option<Compression>,
eprintln!("warning: {warning}");
}
+ let output_format = match self.output_format {
+ Some(format) => format,
+ None => match &self.output {
+ Some(output) => output.as_path().try_into()?,
+ _ => OutputFormat::Csv,
+ },
+ };
+
let mut system_file = ReadOptions::new(warn)
.with_encoding(self.encoding)
.with_password(self.password.clone())
.open_file(&self.input)?;
- if self.to_unicode {
+ if output_format == OutputFormat::Sys && self.sys_options.to_unicode {
system_file = system_file.into_unicode();
}
let (dictionary, _, cases) = system_file.into_parts();
// Take only the first `self.max_cases` cases.
let cases = cases.take(self.max_cases.unwrap_or(usize::MAX));
- let output_format = match self.output_format {
- Some(format) => format,
- None => {
- let Some(output) = &self.output else {
- bail!("either --output-format or an output file name must be specified");
- };
- output.as_path().try_into()?
- }
- };
-
match output_format {
OutputFormat::Csv => {
let writer = match self.output {
Some(path) => Box::new(File::create(path)?) as Box<dyn Write>,
None => Box::new(stdout()),
};
- let mut output = csv::WriterBuilder::new().from_writer(writer);
+ let decimal: u8 = self.csv_options.decimal.try_into()?;
+ let delimiter: u8 = match self.csv_options.delimiter {
+ Some(delimiter) => delimiter.try_into()?,
+ None if decimal != b',' => b',',
+ None => b';',
+ };
+ let qualifier: u8 = self.csv_options.qualifier.try_into()?;
+ let mut output = csv::WriterBuilder::new()
+ .delimiter(delimiter)
+ .quote(qualifier)
+ .from_writer(writer);
if !self.csv_options.no_var_names {
output
.write_record(dictionary.variables.iter().map(|var| var.name.as_str()))?;
for case in cases {
output.write_record(case?.into_iter().zip(dictionary.variables.iter()).map(
|(datum, variable)| {
- if datum == Datum::sysmis() {
+ if self.csv_options.labels
+ && let Some(label) = variable.value_labels.get(&datum)
+ {
+ String::from(label)
+ } else if datum.is_sysmis() {
String::from(" ")
+ } else if self.csv_options.print_formats {
+ datum
+ .display(variable.print_format)
+ .with_trimming()
+ .to_string()
} else {
- datum.display(variable.print_format).to_string()
+ match variable.print_format.type_() {
+ Type::F
+ | Type::Comma
+ | Type::Dot
+ | Type::Dollar
+ | Type::Pct
+ | Type::E
+ | Type::CC(_)
+ | Type::N
+ | Type::Z
+ | Type::P
+ | Type::PK
+ | Type::IB
+ | Type::PIB
+ | Type::PIBHex
+ | Type::RB
+ | Type::RBHex
+ | Type::WkDay
+ | Type::Month => datum
+ .as_number()
+ .unwrap()
+ .unwrap()
+ .display_plain()
+ .with_decimal(self.csv_options.decimal)
+ .to_string(),
+
+ Type::Date
+ | Type::ADate
+ | Type::EDate
+ | Type::JDate
+ | Type::SDate
+ | Type::QYr
+ | Type::MoYr
+ | Type::WkYr => {
+ let number = datum.as_number().unwrap().unwrap();
+ if number >= 0.0
+ && let Some(date) = calendar_offset_to_gregorian(
+ number / 60.0 / 60.0 / 24.0,
+ )
+ {
+ format!(
+ "{:02}/{:02}/{:04}",
+ date.month(),
+ date.day(),
+ date.year()
+ )
+ } else {
+ String::from(" ")
+ }
+ }
+
+ Type::DateTime | Type::YmdHms => {
+ let number = datum.as_number().unwrap().unwrap();
+ if number >= 0.0
+ && let Some(date) = calendar_offset_to_gregorian(
+ number / 60.0 / 60.0 / 24.0,
+ )
+ && let Some(time) =
+ NaiveTime::from_num_seconds_from_midnight_opt(
+ (number % (60.0 * 60.0 * 24.0)) as u32,
+ 0,
+ )
+ {
+ format!(
+ "{:02}/{:02}/{:04} {:02}:{:02}:{:02}",
+ date.month(),
+ date.day(),
+ date.year(),
+ time.hour(),
+ time.minute(),
+ time.second()
+ )
+ } else {
+ String::from(" ")
+ }
+ }
+
+ Type::MTime | Type::Time | Type::DTime => {
+ let number = datum.as_number().unwrap().unwrap();
+ if let Some(time) =
+ NaiveTime::from_num_seconds_from_midnight_opt(
+ number.abs() as u32,
+ 0,
+ )
+ {
+ format!(
+ "{}{:02}:{:02}:{:02}",
+ if number.is_sign_negative() { "-" } else { "" },
+ time.hour(),
+ time.minute(),
+ time.second()
+ )
+ } else {
+ String::from(" ")
+ }
+ }
+
+ Type::A | Type::AHex => datum
+ .display(variable.print_format)
+ .with_trimming()
+ .to_string(),
+ }
}
},
))?;
projects / pspp / commitdiff