cfm: Clear RDI on new CFM configurations.

When CFM is first configured, it detects no remote endpoints, and
thus sets RDI on its CCMs.  This can cause the receiver of these
CCMs to think there is a problem when really things are simply
initializing.  This patch fixes the issue by not setting the RDI
bit in CCMs until at least one fault interval has passed.

Bug #12610.
Reported-by: Paul Ingram <paul@nicira.com>
Signed-off-by: Ethan Jackson <ethan@nicira.com>

diff --git a/lib/cfm.c b/lib/cfm.c
index 65701781a3c8e734e4273ca31b22c4a667d80009..134d8b78bdb767be17f86d8d07ca017aebf84366 100644 (file)
--- a/lib/cfm.c
+++ b/lib/cfm.c
@@ -87,6 +87,7 @@ struct cfm {
 
     uint64_t mpid;
     bool extended;         /* Extended mode. */
+    bool booted;           /* A full fault interval has occured. */
     enum cfm_fault_reason fault;  /* Connectivity fault status. */
     enum cfm_fault_reason recv_fault;  /* Bit mask of faults occuring on
                                           receive. */
@@ -407,6 +408,7 @@ cfm_run(struct cfm *cfm)
             ds_destroy(&ds);
         }
 
+        cfm->booted = true;
         timer_set_duration(&cfm->fault_timer, interval);
         VLOG_DBG("%s: new fault interval", cfm->name);
     }
@@ -469,7 +471,7 @@ cfm_compose_ccm(struct cfm *cfm, struct ofpbuf *packet,
         ccm->interval_ms_x = htons(0);
     }
 
-    if (hmap_is_empty(&cfm->remote_mps)) {
+    if (cfm->booted && hmap_is_empty(&cfm->remote_mps)) {
         ccm->flags |= CCM_RDI_MASK;
     }