-# Spec file for vswitch and related programs.
-
-# Copyright (C) 2009, 2010 Nicira Networks, Inc.
-#
-# Copying and distribution of this file, with or without modification,
-# are permitted in any medium without royalty provided the copyright
-# notice and this notice are preserved. This file is offered as-is,
-# without warranty of any kind.
-
-# When building, the rpmbuild command line should define
-# vswitch_version, xen_version, and build_number using -D arguments.
-# for example:
-#
-# rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
-#
-%define version %{vswitch_version}-%{xen_version}
-
-Name: vswitch
-Summary: Virtual switch
-Group: System Environment/Daemons
-URL: http://www.openvswitch.org/
-Vendor: Nicira Networks, Inc.
-Version: %{vswitch_version}
-
-# The entire source code is ASL 2.0 except datapath/ which is GPLv2
-License: ASL 2.0 and GPLv2
-Release: 1
-Source: openvswitch-%{vswitch_version}.tar.gz
-Buildroot: /tmp/vswitch-xen-rpm
-Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
-# The following Conflicts prevents the "vswitch" package generated by
-# this spec file from installing at the same time as the "openvswitch"
-# package shipped with XenServer 5.5.900. In fact, the packages
-# contain some files with identical names anyhow, so they will not
-# coexist, but adding an explicit Conflicts makes this conflict more
-# obvious.
-Conflicts: openvswitch
-
-%description
-The vswitch provides standard network bridging functions augmented with
-support for the OpenFlow protocol for remote per-flow control of
-traffic.
-
-%prep
-%setup -q -n openvswitch-%{vswitch_version}
-
-%build
-./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
-make %{_smp_mflags}
-
-%install
-rm -rf $RPM_BUILD_ROOT
-make install DESTDIR=$RPM_BUILD_ROOT
-install -d -m 755 $RPM_BUILD_ROOT/etc
-install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
-install -m 755 xenserver/etc_init.d_vswitch \
- $RPM_BUILD_ROOT/etc/init.d/vswitch
-install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
- $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
-install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
-install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
-install -m 755 xenserver/etc_logrotate.d_vswitch \
- $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
-install -d -m 755 $RPM_BUILD_ROOT/etc/profile.d
-install -m 755 xenserver/etc_profile.d_vswitch.sh \
- $RPM_BUILD_ROOT/etc/profile.d/vswitch.sh
-install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
-install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
- $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
-install -d -m 755 $RPM_BUILD_ROOT/usr/share/vswitch/scripts
-install -m 644 vswitchd/vswitch.ovsschema \
- $RPM_BUILD_ROOT/usr/share/vswitch/vswitch.ovsschema
-install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/interface-reconfigure
-install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigure.py \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/InterfaceReconfigure.py
-install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureBridge.py \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/InterfaceReconfigureBridge.py
-install -m 644 xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/InterfaceReconfigureVswitch.py
-install -m 755 xenserver/etc_xensource_scripts_vif \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/vif
-install -m 755 xenserver/usr_share_vswitch_scripts_refresh-network-uuids \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/refresh-network-uuids
-install -m 755 xenserver/usr_sbin_xen-bugtool \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/xen-bugtool
-install -m 755 xenserver/usr_sbin_brctl \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/brctl
-install -m 755 xenserver/usr_share_vswitch_scripts_sysconfig.template \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/sysconfig.template
-install -m 644 \
- xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
- $RPM_BUILD_ROOT/usr/share/vswitch/scripts/XSFeatureVSwitch.py
-
-install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch
-find datapath/linux-2.6 -name *.ko -exec install -m 755 \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch \;
-
-# Get rid of stuff we don't want to make RPM happy.
-rm \
- $RPM_BUILD_ROOT/usr/bin/ovs-controller \
- $RPM_BUILD_ROOT/usr/bin/ovs-discover \
- $RPM_BUILD_ROOT/usr/bin/ovs-kill \
- $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
- $RPM_BUILD_ROOT/usr/bin/ovs-pki \
- $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
- $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
- $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
- $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
- $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
- $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
- $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
-rm -f $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch/veth_mod.ko
-
-install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%post
-if [ ! -f /etc/xensource-inventory ]; then
- printf "XenSource inventory not present in /etc/xensource-inventory"
- exit 1
-fi
-
-if [ "$1" = "1" ]; then
- if md5sum -c --status <<EOF
-ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
-b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
-51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
-5654c8c36699fcc8744ca9cd5b855414 /usr/sbin/xen-bugtool
-EOF
- then
- printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
- elif md5sum -c --status <<EOF
-ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
-b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
-51970ad613a3996d5997e18e44db47da /opt/xensource/libexec/interface-reconfigure
-f6519085c2fc5f7bc4eccc294ed62000 /usr/sbin/xen-bugtool
-EOF
- then
- printf "\nVerified host scripts from XenServer 5.5.0-24648p (Update 1)\n"
- printf "or 5.5.0-25727p (Update 2).\n\n"
- elif md5sum -c --status <<EOF
-ca141d60061dcfdade73e75abc6529b5 /usr/sbin/brctl
-b8e9835862ef1a9cec2a3f477d26c989 /etc/xensource/scripts/vif
-ce451d3c985fd1db6497a363f0d9dedb /opt/xensource/libexec/interface-reconfigure
-2b53f500431fcba5276c896e9e4281b9 /usr/sbin/xen-bugtool
-EOF
- then
- printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
- else
-cat <<EOF
-
-The original XenServer scripts replaced by this package are not those
-of any supported version of XenServer. This could lead to unexpected
-behavior of your server. Unless you are sure you know what you are
-doing, it is highly recommended that you remove this package
-immediately after the install completes, which will restore the
-XenServer scripts that you were previously using.
-
-EOF
- fi
-fi
-
-if test ! -e /var/xapi/network.dbcache; then
- if test "$1" = 1; then
- printf "Creating xapi database cache... "
- else
- printf "warning: Open vSwitch is being re-installed or upgraded,\n"
- printf " but the xapi database cache is missing.\n"
- printf "Re-creating xapi database cache... "
- fi
-
- if /usr/share/vswitch/scripts/interface-reconfigure rewrite; then
- printf "done.\n"
- else
- printf "FAILED\n"
- printf "Open vSwitch can only be installed on a XenServer that\n"
- printf "has connectivity to xapi on the pool master. Please\n"
- printf "fix connectivity to the pool master, then try again.\n"
- exit 1
- fi
-fi
-
-# Ensure that modprobe will find our modules.
-depmod %{xen_version}
-
-if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
- cat >>/etc/sysctl.conf <<EOF
-# This works around an issue in xhad, which binds to a particular
-# Ethernet device, which in turn causes ICMP port unreachable messages
-# if packets are received are on the wrong interface, which in turn
-# can happen if we send out ARP replies on every interface (as Linux
-# does by default) instead of just on the interface that has the IP
-# address being ARPed for, which this sysctl setting in turn works
-# around.
-#
-# Bug #1378.
-net.ipv4.conf.all.arp_filter = 1
-EOF
-fi
-
-if test ! -e /etc/ovs-vswitchd.conf.db; then
- # Create ovs-vswitchd config database
- ovsdb-tool -vANY:console:emer create /etc/ovs-vswitchd.conf.db \
- /usr/share/vswitch/vswitch.ovsschema \
-
- # Create initial table in config database
- ovsdb-tool -vANY:console:emer transact /etc/ovs-vswitchd.conf.db \
- '[{"op": "insert", "table": "Open_vSwitch", "row": {}}]' \
- > /dev/null
-fi
-
-# Create default or update existing /etc/sysconfig/vswitch.
-SYSCONFIG=/etc/sysconfig/vswitch
-TEMPLATE=/usr/share/vswitch/scripts/sysconfig.template
-if [ ! -e $SYSCONFIG ]; then
- cp $TEMPLATE $SYSCONFIG
-else
- for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
- do
- if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
- echo >> $SYSCONFIG
- sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
- fi
- done
-fi
-
-# Replace XenServer files by our versions.
-mkdir -p /usr/lib/vswitch/xs-original \
- || printf "Could not create script backup directory.\n"
-for f in \
- /opt/xensource/libexec/interface-reconfigure \
- /opt/xensource/libexec/InterfaceReconfigure.py \
- /opt/xensource/libexec/InterfaceReconfigureBridge.py \
- /opt/xensource/libexec/InterfaceReconfigureVswitch.py \
- /etc/xensource/scripts/vif \
- /usr/sbin/xen-bugtool \
- /usr/sbin/brctl
-do
- s=$(basename "$f")
- t=$(readlink "$f")
- if [ -f "$f" ] && [ "$t" != "/usr/share/vswitch/scripts/$s" ]; then
- mv "$f" /usr/lib/vswitch/xs-original/ \
- || printf "Could not save original XenServer $s script\n"
- ln -s "/usr/share/vswitch/scripts/$s" "$f" \
- || printf "Could not link to vSwitch $s script\n"
- fi
-done
-
-# Install xsconsole plugin
-plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
-if [ "$plugin" != "/usr/share/vswitch/scripts/XSFeatureVSwitch.py" ]; then
- rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
- ln -s /usr/share/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
-fi
-
-# Ensure all required services are set to run
-for s in vswitch vswitch-xapi-update; do
- if chkconfig --list $s >/dev/null 2>&1; then
- chkconfig --del $s || printf "Could not remove $s init script."
- fi
- chkconfig --add $s || printf "Could not add $s init script."
- chkconfig $s on || printf "Could not enable $s init script."
-done
-
-# Configure system to use vswitch
-echo vswitch > /etc/xensource/network.conf
-
-if [ "$1" = "1" ]; then # $1 = 2 for upgrade
- printf "\nYou MUST reboot the server NOW to complete the change to the\n"
- printf "the vSwitch. Attempts to modify networking on the server\n"
- printf "or any hosted VM will fail until after the reboot and could\n"
- printf "leave the server in an state requiring manual recovery.\n\n"
-else
- printf "\nTo use the new vSwitch, you should reboot the server\n"
- printf "now. Failure to do so may result in incorrect operation.\n\n"
-fi
-
-%preun
-if [ "$1" = "0" ]; then # $1 = 1 for upgrade
- for s in vswitch vswitch-xapi-update; do
- chkconfig --del $s || printf "Could not remove $s init script."
- done
-fi
-
-
-%postun
-if [ "$1" = "0" ]; then # $1 = 1 for upgrade
-
- rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py \
- /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyc \
- /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.pyo \
- || printf "Could not remove vSwitch xsconsole plugin.\n"
-
- # Restore original XenServer scripts
- for f in \
- /opt/xensource/libexec/interface-reconfigure \
- /etc/xensource/scripts/vif \
- /usr/sbin/xen-bugtool \
- /usr/sbin/brctl
- do
- s=$(basename "$f")
- if [ ! -f "/usr/lib/vswitch/xs-original/$s" ]; then
- printf "Original XenServer $s script not present in /usr/lib/vswitch/xs-original\n"
- printf "Could not restore original XenServer script.\n"
- else
- (rm -f "$f" \
- && mv "/usr/lib/vswitch/xs-original/$s" "$f") \
- || printf "Could not restore original XenServer $s script.\n"
- fi
- done
-
- # Remove all configuration files
- rm -f /etc/ovs-vswitchd.conf.db
- rm -f /etc/sysconfig/vswitch
- rm -f /etc/ovs-vswitchd.cacert
- rm -f /var/xapi/network.dbcache
-
- # Configure system to use bridge
- echo bridge > /etc/xensource/network.conf
-
- printf "\nYou MUST reboot the server now to complete the change to\n"
- printf "standard Xen networking. Attempts to modify networking on the\n"
- printf "server or any hosted VM will fail until after the reboot and\n"
- printf "could leave the server in a state requiring manual recovery.\n\n"
-fi
-
-
-%files
-%defattr(-,root,root)
-/etc/init.d/vswitch
-/etc/init.d/vswitch-xapi-update
-/etc/xapi.d/plugins/vswitch-cfg-update
-/etc/logrotate.d/vswitch
-/etc/profile.d/vswitch.sh
-/lib/modules/%{xen_version}/kernel/net/vswitch/openvswitch_mod.ko
-/lib/modules/%{xen_version}/kernel/net/vswitch/brcompat_mod.ko
-%if %(echo '%{xen_version}'|awk -F"." '{if ($3>=18) print 1; else print 0;}')
-/lib/modules/%{xen_version}/kernel/net/vswitch/ip_gre_mod.ko
-%endif
-/usr/share/vswitch/scripts/refresh-network-uuids
-/usr/share/vswitch/scripts/interface-reconfigure
-/usr/share/vswitch/scripts/InterfaceReconfigure.py
-/usr/share/vswitch/scripts/InterfaceReconfigureBridge.py
-/usr/share/vswitch/scripts/InterfaceReconfigureVswitch.py
-/usr/share/vswitch/scripts/vif
-/usr/share/vswitch/scripts/xen-bugtool
-/usr/share/vswitch/scripts/XSFeatureVSwitch.py
-/usr/share/vswitch/scripts/brctl
-/usr/share/vswitch/scripts/sysconfig.template
-/usr/share/vswitch/vswitch.ovsschema
-/usr/sbin/ovs-brcompatd
-/usr/sbin/ovs-vswitchd
-/usr/sbin/ovsdb-server
-/usr/bin/ovs-appctl
-/usr/bin/ovs-dpctl
-/usr/bin/ovs-ofctl
-/usr/bin/ovs-vsctl
-/usr/bin/ovsdb-client
-/usr/bin/ovsdb-tool
-/usr/share/man/man1/ovsdb-client.1.gz
-/usr/share/man/man1/ovsdb-server.1.gz
-/usr/share/man/man1/ovsdb-tool.1.gz
-/usr/share/man/man5/ovs-vswitchd.conf.db.5.gz
-/usr/share/man/man8/ovs-appctl.8.gz
-/usr/share/man/man8/ovs-brcompatd.8.gz
-/usr/share/man/man8/ovs-dpctl.8.gz
-/usr/share/man/man8/ovs-ofctl.8.gz
-/usr/share/man/man8/ovs-vsctl.8.gz
-/usr/share/man/man8/ovs-vswitchd.8.gz
-/var/lib/openvswitch
-%exclude /usr/share/vswitch/scripts/*.pyc
-%exclude /usr/share/vswitch/scripts/*.pyo