X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=xenserver%2Fvswitch-xen.spec;h=b186e2647944f8085b6015bbf855add13246451b;hb=378e1f9854e5bee378ff05a26906a45d1673ab7a;hp=a9933d9b3664aedc6182969e6151e332ba9039be;hpb=d8319dd499fddf187406bd570c1eb895955309cb;p=openvswitch

diff --git a/xenserver/vswitch-xen.spec b/xenserver/vswitch-xen.spec
index a9933d9b..b186e264 100644
--- a/xenserver/vswitch-xen.spec
+++ b/xenserver/vswitch-xen.spec
@@ -19,9 +19,11 @@
 Name: vswitch
 Summary: Virtual switch
 Group: System Environment/Daemons
-URL: http://www.vswitch.org/
+URL: http://www.openvswitch.org/
 Version: %{vswitch_version}
-License: GPL3
+
+# The entire source code is ASL 2.0 except datapath/ which is GPLv2
+License: ASL 2.0 and GPLv2
 Release: 1
 Source: openvswitch-%{vswitch_version}.tar.gz
 Buildroot: /tmp/vswitch-xen-rpm
@@ -37,7 +39,7 @@ traffic.
 
 %build
 ./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
-make
+make %{_smp_mflags}
 
 %install
 rm -rf $RPM_BUILD_ROOT
@@ -49,8 +51,6 @@ install -m 755 xenserver/etc_init.d_vswitch \
 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
          $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
-install -m 755 xenserver/etc_sysconfig_vswitch.example \
-         $RPM_BUILD_ROOT/etc/sysconfig/vswitch.example
 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
 install -m 755 xenserver/etc_logrotate.d_vswitch \
          $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
@@ -65,7 +65,15 @@ install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
              $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
 install -m 755 xenserver/etc_xensource_scripts_vif \
              $RPM_BUILD_ROOT%{_prefix}/scripts/vif
-install -m 755 \
+install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
+               $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
+install -m 755 xenserver/usr_sbin_xen-bugtool \
+             $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
+install -m 755 xenserver/usr_sbin_brctl \
+             $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
+install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
+         $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
+install -m 644 \
         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
                $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
 
@@ -103,16 +111,34 @@ if [ "$1" = "1" ]; then
     if ! md5sum -c --status <<EOF
 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
+5654c8c36699fcc8744ca9cd5b855414  /usr/sbin/xen-bugtool
 EOF
     then
         printf "\nThe original XenServer scripts replaced by this package\n"
         printf "are different than expected.  This could lead to unexpected\n"
         printf "behavior of your server.  Unless you are sure you know what\n"
-        printf "you are doing, it is highly recomended that you remove this\n"
+        printf "you are doing, it is highly recommended that you remove this\n"
         printf "package immediately after the install completes, which\n"
         printf "will restore the XenServer scripts that you were previously\n"
         printf "using.\n\n"
     fi
+    if test "`/usr/sbin/brctl --version`" != "bridge-utils, 1.1"; then
+cat <<EOF
+
+/usr/sbin/brctl replaced by this package reports the following version:
+
+`/usr/sbin/brctl --version`
+
+The expected version was:
+
+bridge-utils, 1.1
+
+Unless you are sure you know what you are doing, it is highly recommended that
+you remove this package immediately after the install completes, which will
+restore the original /usr/sbin/brctl.
+
+EOF
+    fi
 fi
 
 if test ! -e /etc/ovs-vswitch.dbcache; then
@@ -163,21 +189,47 @@ EOF
 fi
 
 %post
-source /etc/xensource-inventory
-
-xe host-param-set \
-    "other-config:vSwitchVersion=%{version}" uuid="$INSTALLATION_UUID" ||
-    echo "Could not set vSwitchVersion config parameter"
+if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
+    cat >>/etc/sysctl.conf <<EOF
+# This works around an issue in xhad, which binds to a particular
+# Ethernet device, which in turn causes ICMP port unreachable messages
+# if packets are received are on the wrong interface, which in turn
+# can happen if we send out ARP replies on every interface (as Linux
+# does by default) instead of just on the interface that has the IP
+# address being ARPed for, which this sysctl setting in turn works
+# around.
+#
+# Bug #1378.
+net.ipv4.conf.all.arp_filter = 1
+EOF
+fi
 
 # Ensure ovs-vswitchd.conf exists
 touch /etc/ovs-vswitchd.conf
 
-# Replace original XenServer files
+# Create default or update existing /etc/sysconfig/vswitch.
+SYSCONFIG=/etc/sysconfig/vswitch
+TEMPLATE=/root/vswitch/scripts/sysconfig.template
+if [ ! -e $SYSCONFIG ]; then
+    cp $TEMPLATE $SYSCONFIG
+else
+    for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
+    do
+        if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
+            echo >> $SYSCONFIG
+            sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
+        fi
+    done
+fi
+
+# Replace XenServer files by our versions.
 mkdir -p %{_prefix}/xs-original \
     || printf "Could not create script backup directory.\n"
 for f in \
     /opt/xensource/libexec/interface-reconfigure \
-    /etc/xensource/scripts/vif
+    /etc/xensource/scripts/vif \
+    /usr/sbin/xen-bugtool \
+    /usr/sbin/brctl
 do
     s=$(basename "$f")
     t=$(readlink "$f")
@@ -234,7 +286,9 @@ if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
     # Restore original XenServer scripts
     for f in \
         /opt/xensource/libexec/interface-reconfigure \
-        /etc/xensource/scripts/vif
+        /etc/xensource/scripts/vif \
+        /usr/sbin/xen-bugtool \
+        /usr/sbin/brctl
     do
         s=$(basename "$f")
         if [ ! -f "%{_prefix}/xs-original/$s" ]; then
@@ -255,18 +309,7 @@ if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
     rm -f /etc/sysconfig/vswitch
     rm -f /var/log/vswitch*
     rm -f /etc/ovs-vswitchd.cacert
-
-    if [ ! -f /etc/xensource-inventory ]; then
-        printf "XenSource inventory not present in /etc/xensource-inventory\n"
-        printf "Could not remove vSwitchVersion from XAPI database.\n"
-        exit 1
-    else
-        source /etc/xensource-inventory
-        xe host-param-remove \
-            param-name=other-config param-key=vSwitchVersion \
-            uuid="$INSTALLATION_UUID" ||
-            echo "Could not clear vSwitchVersion config parameter."
-    fi
+    rm -f /etc/ovs-vswitch.dbcache
 
     printf "\nYou MUST reboot the server now to complete the change to\n"
     printf "standard Xen networking.  Attempts to modify networking on the\n"
@@ -280,15 +323,18 @@ fi
 /etc/init.d/vswitch
 /etc/init.d/vswitch-xapi-update
 /etc/xapi.d/plugins/vswitch-cfg-update
-/etc/sysconfig/vswitch.example
 /etc/logrotate.d/vswitch
 /etc/profile.d/vswitch.sh
 /root/vswitch/kernel_modules/brcompat_mod.ko
 /root/vswitch/kernel_modules/openvswitch_mod.ko
 /root/vswitch/kernel_modules/veth_mod.ko
+/root/vswitch/scripts/dump-vif-details
 /root/vswitch/scripts/interface-reconfigure
 /root/vswitch/scripts/vif
+/root/vswitch/scripts/xen-bugtool
 /root/vswitch/scripts/XSFeatureVSwitch.py
+/root/vswitch/scripts/brctl
+/root/vswitch/scripts/sysconfig.template
 # Following two files are generated automatically by rpm.  We don't
 # really need them and they won't be used on the XenServer, but there
 # isn't an obvious place to get rid of them since they are generated