X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=xenserver%2Fvswitch-xen.spec;h=a23b3ec158e96916f4b7a91b48c286c14d293695;hb=b2cdfeae16fc4c7c7aedcc2b5e033abcaf52dc95;hp=489766908ba425e252fbe7872c1dc45bd39164c7;hpb=0bb1f43dd8f5e894ed45d158daa5f94f4990c05a;p=openvswitch

diff --git a/xenserver/vswitch-xen.spec b/xenserver/vswitch-xen.spec
index 48976690..a23b3ec1 100644
--- a/xenserver/vswitch-xen.spec
+++ b/xenserver/vswitch-xen.spec
@@ -19,12 +19,22 @@
 Name: vswitch
 Summary: Virtual switch
 Group: System Environment/Daemons
-URL: http://www.vswitch.org/
+URL: http://www.openvswitch.org/
 Version: %{vswitch_version}
-License: GPL3
+
+# The entire source code is ASL 2.0 except datapath/ which is GPLv2
+License: ASL 2.0 and GPLv2
 Release: 1
 Source: openvswitch-%{vswitch_version}.tar.gz
 Buildroot: /tmp/vswitch-xen-rpm
+Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
+# The following Conflicts prevents the "vswitch" package generated by
+# this spec file from installing at the same time as the "openvswitch"
+# package shipped with XenServer 5.5.900.  In fact, the packages
+# contain some files with identical names anyhow, so they will not
+# coexist, but adding an explicit Conflicts makes this conflict more
+# obvious.
+Conflicts: openvswitch
 
 %description
 The vswitch provides standard network bridging functions augmented with
@@ -36,7 +46,7 @@ traffic.
 
 %build
 ./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
-make
+make %{_smp_mflags}
 
 %install
 rm -rf $RPM_BUILD_ROOT
@@ -48,8 +58,6 @@ install -m 755 xenserver/etc_init.d_vswitch \
 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
          $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
-install -m 755 xenserver/etc_sysconfig_vswitch.example \
-         $RPM_BUILD_ROOT/etc/sysconfig/vswitch.example
 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
 install -m 755 xenserver/etc_logrotate.d_vswitch \
          $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
@@ -64,7 +72,15 @@ install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
              $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
 install -m 755 xenserver/etc_xensource_scripts_vif \
              $RPM_BUILD_ROOT%{_prefix}/scripts/vif
-install -m 755 \
+install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
+               $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
+install -m 755 xenserver/usr_sbin_xen-bugtool \
+             $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
+install -m 755 xenserver/usr_sbin_brctl \
+             $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
+install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
+         $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
+install -m 644 \
         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
                $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
 
@@ -77,16 +93,17 @@ rm -rf \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
+    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-openflowd \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
-    $RPM_BUILD_ROOT/root/vswitch/bin/secchan \
+    $RPM_BUILD_ROOT/root/vswitch/kernel_modules/veth_mod.ko \
     $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
+    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-openflowd.8 \
     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
-    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/secchan.8 \
     $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
 
 %clean
@@ -99,18 +116,32 @@ if [ ! -f /etc/xensource-inventory ]; then
 fi
 
 if [ "$1" = "1" ]; then
-    if ! md5sum -c --status <<EOF
+    if md5sum -c --status <<EOF
+ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
+5654c8c36699fcc8744ca9cd5b855414  /usr/sbin/xen-bugtool
 EOF
     then
-        printf "\nThe original XenServer scripts replaced by this package\n"
-        printf "are different than expected.  This could lead to unexpected\n"
-        printf "behavior of your server.  Unless you are sure you know what\n"
-        printf "you are doing, it is highly recomended that you remove this\n"
-        printf "package immediately after the install completes, which\n"
-        printf "will restore the XenServer scripts that you were previously\n"
-        printf "using.\n\n"
+        printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
+    elif md5sum -c --status <<EOF
+ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
+b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
+ce451d3c985fd1db6497a363f0d9dedb  /opt/xensource/libexec/interface-reconfigure
+2b53f500431fcba5276c896e9e4281b9  /usr/sbin/xen-bugtool
+EOF
+        printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
+    else
+cat <<EOF
+
+The original XenServer scripts replaced by this package are not those
+of any supported version of XenServer.  This could lead to unexpected
+behavior of your server.  Unless you are sure you know what you are
+doing, it is highly recommended that you remove this package
+immediately after the install completes, which will restore the
+XenServer scripts that you were previously using.
+
+EOF
     fi
 fi
 
@@ -162,21 +193,47 @@ EOF
 fi
 
 %post
-source /etc/xensource-inventory
-
-xe host-param-set \
-    "other-config:vSwitchVersion=%{version}" uuid="$INSTALLATION_UUID" ||
-    echo "Could not set vSwitchVersion config parameter"
+if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
+    cat >>/etc/sysctl.conf <<EOF
+# This works around an issue in xhad, which binds to a particular
+# Ethernet device, which in turn causes ICMP port unreachable messages
+# if packets are received are on the wrong interface, which in turn
+# can happen if we send out ARP replies on every interface (as Linux
+# does by default) instead of just on the interface that has the IP
+# address being ARPed for, which this sysctl setting in turn works
+# around.
+#
+# Bug #1378.
+net.ipv4.conf.all.arp_filter = 1
+EOF
+fi
 
 # Ensure ovs-vswitchd.conf exists
 touch /etc/ovs-vswitchd.conf
 
-# Replace original XenServer files
+# Create default or update existing /etc/sysconfig/vswitch.
+SYSCONFIG=/etc/sysconfig/vswitch
+TEMPLATE=/root/vswitch/scripts/sysconfig.template
+if [ ! -e $SYSCONFIG ]; then
+    cp $TEMPLATE $SYSCONFIG
+else
+    for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
+    do
+        if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
+            echo >> $SYSCONFIG
+            sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
+        fi
+    done
+fi
+
+# Replace XenServer files by our versions.
 mkdir -p %{_prefix}/xs-original \
     || printf "Could not create script backup directory.\n"
 for f in \
     /opt/xensource/libexec/interface-reconfigure \
-    /etc/xensource/scripts/vif
+    /etc/xensource/scripts/vif \
+    /usr/sbin/xen-bugtool \
+    /usr/sbin/brctl
 do
     s=$(basename "$f")
     t=$(readlink "$f")
@@ -233,7 +290,9 @@ if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
     # Restore original XenServer scripts
     for f in \
         /opt/xensource/libexec/interface-reconfigure \
-        /etc/xensource/scripts/vif
+        /etc/xensource/scripts/vif \
+        /usr/sbin/xen-bugtool \
+        /usr/sbin/brctl
     do
         s=$(basename "$f")
         if [ ! -f "%{_prefix}/xs-original/$s" ]; then
@@ -249,24 +308,11 @@ if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
     find  %{_prefix} -type d -depth -exec rmdir \{\} \; \
         || printf "Could not remove vSwitch install directory.\n"
 
-    # Remove all configuration and log files
+    # Remove all configuration files
     rm -f /etc/ovs-vswitchd.conf
     rm -f /etc/sysconfig/vswitch
-    rm -f /var/log/vswitch*
     rm -f /etc/ovs-vswitchd.cacert
 
-    if [ ! -f /etc/xensource-inventory ]; then
-        printf "XenSource inventory not present in /etc/xensource-inventory\n"
-        printf "Could not remove vSwitchVersion from XAPI database.\n"
-        exit 1
-    else
-        source /etc/xensource-inventory
-        xe host-param-remove \
-            param-name=other-config param-key=vSwitchVersion \
-            uuid="$INSTALLATION_UUID" ||
-            echo "Could not clear vSwitchVersion config parameter."
-    fi
-
     printf "\nYou MUST reboot the server now to complete the change to\n"
     printf "standard Xen networking.  Attempts to modify networking on the\n"
     printf "server or any hosted VM will fail until after the reboot and\n"
@@ -279,15 +325,17 @@ fi
 /etc/init.d/vswitch
 /etc/init.d/vswitch-xapi-update
 /etc/xapi.d/plugins/vswitch-cfg-update
-/etc/sysconfig/vswitch.example
 /etc/logrotate.d/vswitch
 /etc/profile.d/vswitch.sh
 /root/vswitch/kernel_modules/brcompat_mod.ko
 /root/vswitch/kernel_modules/openvswitch_mod.ko
-/root/vswitch/kernel_modules/veth_mod.ko
+/root/vswitch/scripts/dump-vif-details
 /root/vswitch/scripts/interface-reconfigure
 /root/vswitch/scripts/vif
+/root/vswitch/scripts/xen-bugtool
 /root/vswitch/scripts/XSFeatureVSwitch.py
+/root/vswitch/scripts/brctl
+/root/vswitch/scripts/sysconfig.template
 # Following two files are generated automatically by rpm.  We don't
 # really need them and they won't be used on the XenServer, but there
 # isn't an obvious place to get rid of them since they are generated