X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=xenserver%2Fvswitch-xen.spec;h=a23b3ec158e96916f4b7a91b48c286c14d293695;hb=44cb492f4674890732bccd2c32d7744372692577;hp=fda211af7df62fb04dabaeb27430b148928b1c4d;hpb=8521345b51ef456819412b175538555eb9f3c152;p=openvswitch

diff --git a/xenserver/vswitch-xen.spec b/xenserver/vswitch-xen.spec
index fda211af..a23b3ec1 100644
--- a/xenserver/vswitch-xen.spec
+++ b/xenserver/vswitch-xen.spec
@@ -28,6 +28,13 @@ Release: 1
 Source: openvswitch-%{vswitch_version}.tar.gz
 Buildroot: /tmp/vswitch-xen-rpm
 Requires: kernel-xen = %(echo '%{xen_version}' | sed 's/xen$//')
+# The following Conflicts prevents the "vswitch" package generated by
+# this spec file from installing at the same time as the "openvswitch"
+# package shipped with XenServer 5.5.900.  In fact, the packages
+# contain some files with identical names anyhow, so they will not
+# coexist, but adding an explicit Conflicts makes this conflict more
+# obvious.
+Conflicts: openvswitch
 
 %description
 The vswitch provides standard network bridging functions augmented with
@@ -51,8 +58,6 @@ install -m 755 xenserver/etc_init.d_vswitch \
 install -m 755 xenserver/etc_init.d_vswitch-xapi-update \
          $RPM_BUILD_ROOT/etc/init.d/vswitch-xapi-update
 install -d -m 755 $RPM_BUILD_ROOT/etc/sysconfig
-install -m 755 xenserver/etc_sysconfig_vswitch.example \
-         $RPM_BUILD_ROOT/etc/sysconfig/vswitch.example
 install -d -m 755 $RPM_BUILD_ROOT/etc/logrotate.d
 install -m 755 xenserver/etc_logrotate.d_vswitch \
          $RPM_BUILD_ROOT/etc/logrotate.d/vswitch
@@ -73,6 +78,8 @@ install -m 755 xenserver/usr_sbin_xen-bugtool \
              $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
 install -m 755 xenserver/usr_sbin_brctl \
              $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
+install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
+         $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
 install -m 644 \
         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
                $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
@@ -86,16 +93,17 @@ rm -rf \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
+    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-openflowd \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
     $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
-    $RPM_BUILD_ROOT/root/vswitch/bin/secchan \
+    $RPM_BUILD_ROOT/root/vswitch/kernel_modules/veth_mod.ko \
     $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
+    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-openflowd.8 \
     $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
-    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/secchan.8 \
     $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
 
 %clean
@@ -108,34 +116,30 @@ if [ ! -f /etc/xensource-inventory ]; then
 fi
 
 if [ "$1" = "1" ]; then
-    if ! md5sum -c --status <<EOF
+    if md5sum -c --status <<EOF
+ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
 b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
 51970ad613a3996d5997e18e44db47da  /opt/xensource/libexec/interface-reconfigure
 5654c8c36699fcc8744ca9cd5b855414  /usr/sbin/xen-bugtool
 EOF
     then
-        printf "\nThe original XenServer scripts replaced by this package\n"
-        printf "are different than expected.  This could lead to unexpected\n"
-        printf "behavior of your server.  Unless you are sure you know what\n"
-        printf "you are doing, it is highly recommended that you remove this\n"
-        printf "package immediately after the install completes, which\n"
-        printf "will restore the XenServer scripts that you were previously\n"
-        printf "using.\n\n"
-    fi
-    if test "`/usr/sbin/brctl --version`" != "bridge-utils, 1.1"; then
+        printf "\nVerified host scripts from XenServer 5.5.0.\n\n"
+    elif md5sum -c --status <<EOF
+ca141d60061dcfdade73e75abc6529b5  /usr/sbin/brctl
+b8e9835862ef1a9cec2a3f477d26c989  /etc/xensource/scripts/vif
+ce451d3c985fd1db6497a363f0d9dedb  /opt/xensource/libexec/interface-reconfigure
+2b53f500431fcba5276c896e9e4281b9  /usr/sbin/xen-bugtool
+EOF
+        printf "\nVerified host scripts from XenServer 5.5.900.\n\n"
+    else
 cat <<EOF
 
-/usr/sbin/brctl replaced by this package reports the following version:
-
-`/usr/sbin/brctl --version`
-
-The expected version was:
-
-bridge-utils, 1.1
-
-Unless you are sure you know what you are doing, it is highly recommended that
-you remove this package immediately after the install completes, which will
-restore the original /usr/sbin/brctl.
+The original XenServer scripts replaced by this package are not those
+of any supported version of XenServer.  This could lead to unexpected
+behavior of your server.  Unless you are sure you know what you are
+doing, it is highly recommended that you remove this package
+immediately after the install completes, which will restore the
+XenServer scripts that you were previously using.
 
 EOF
     fi
@@ -207,6 +211,21 @@ fi
 # Ensure ovs-vswitchd.conf exists
 touch /etc/ovs-vswitchd.conf
 
+# Create default or update existing /etc/sysconfig/vswitch.
+SYSCONFIG=/etc/sysconfig/vswitch
+TEMPLATE=/root/vswitch/scripts/sysconfig.template
+if [ ! -e $SYSCONFIG ]; then
+    cp $TEMPLATE $SYSCONFIG
+else
+    for var in $(awk -F'[ :]' '/^# [_A-Z0-9]+:/{print $2}' $TEMPLATE)
+    do
+        if ! grep $var $SYSCONFIG >/dev/null 2>&1; then
+            echo >> $SYSCONFIG
+            sed -n "/$var:/,/$var=/p" $TEMPLATE >> $SYSCONFIG
+        fi
+    done
+fi
+
 # Replace XenServer files by our versions.
 mkdir -p %{_prefix}/xs-original \
     || printf "Could not create script backup directory.\n"
@@ -289,10 +308,9 @@ if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
     find  %{_prefix} -type d -depth -exec rmdir \{\} \; \
         || printf "Could not remove vSwitch install directory.\n"
 
-    # Remove all configuration and log files
+    # Remove all configuration files
     rm -f /etc/ovs-vswitchd.conf
     rm -f /etc/sysconfig/vswitch
-    rm -f /var/log/vswitch*
     rm -f /etc/ovs-vswitchd.cacert
 
     printf "\nYou MUST reboot the server now to complete the change to\n"
@@ -307,18 +325,17 @@ fi
 /etc/init.d/vswitch
 /etc/init.d/vswitch-xapi-update
 /etc/xapi.d/plugins/vswitch-cfg-update
-/etc/sysconfig/vswitch.example
 /etc/logrotate.d/vswitch
 /etc/profile.d/vswitch.sh
 /root/vswitch/kernel_modules/brcompat_mod.ko
 /root/vswitch/kernel_modules/openvswitch_mod.ko
-/root/vswitch/kernel_modules/veth_mod.ko
 /root/vswitch/scripts/dump-vif-details
 /root/vswitch/scripts/interface-reconfigure
 /root/vswitch/scripts/vif
 /root/vswitch/scripts/xen-bugtool
 /root/vswitch/scripts/XSFeatureVSwitch.py
 /root/vswitch/scripts/brctl
+/root/vswitch/scripts/sysconfig.template
 # Following two files are generated automatically by rpm.  We don't
 # really need them and they won't be used on the XenServer, but there
 # isn't an obvious place to get rid of them since they are generated