X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=xenserver%2Fopt_xensource_libexec_InterfaceReconfigureVswitch.py;h=10c6bd20f7442791255f6f0cd8baf1069a8b68c9;hb=47271d0d8d12c5689cd0103dc47b62913a515b36;hp=6c9e3fa8c494d8cb628350ff93ea38a5a7109d48;hpb=9ec4d255acc5628f395fde8aff84a7027c2dc1c9;p=openvswitch

diff --git a/xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py b/xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py
index 6c9e3fa8..10c6bd20 100644
--- a/xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py
+++ b/xenserver/opt_xensource_libexec_InterfaceReconfigureVswitch.py
@@ -1,4 +1,4 @@
-# Copyright (c) 2008,2009 Citrix Systems, Inc.
+# Copyright (c) 2008,2009,2011 Citrix Systems, Inc.
 # Copyright (c) 2009,2010,2011 Nicira Networks.
 #
 # This program is free software; you can redistribute it and/or modify
@@ -38,6 +38,49 @@ def netdev_up(netdev, mtu=None):
 
     run_command(["/sbin/ifconfig", netdev, 'up'] + mtu)
 
+# This is a list of drivers that do support VLAN tx or rx acceleration, but
+# to which the VLAN bug workaround should not be applied.  This could be
+# because these are known-good drivers (that is, they do not have any of
+# the bugs that the workaround avoids) or because the VLAN bug workaround
+# will not work for them and may cause other problems.
+#
+# This is a very short list because few drivers have been tested.
+NO_VLAN_WORKAROUND_DRIVERS = (
+    "bonding",
+)
+def netdev_get_driver_name(netdev):
+    """Returns the name of the driver for network device 'netdev'"""
+    symlink = '%s/sys/class/net/%s/device/driver' % (root_prefix(), netdev)
+    try:
+        target = os.readlink(symlink)
+    except OSError, e:
+        log("%s: could not read netdev's driver name (%s)" % (netdev, e))
+        return None
+
+    slash = target.rfind('/')
+    if slash < 0:
+        log("target %s of symbolic link %s does not contain slash"
+            % (target, symlink))
+        return None
+
+    return target[slash + 1:]
+
+def netdev_get_features(netdev):
+    """Returns the features bitmap for the driver for 'netdev'.
+    The features bitmap is a set of NETIF_F_ flags supported by its driver."""
+    try:
+        features = open("%s/sys/class/net/%s/features" % (root_prefix(), netdev)).read().strip()
+        return int(features, 0)
+    except:
+        return 0 # interface prolly doesn't exist
+
+def netdev_has_vlan_accel(netdev):
+    """Returns True if 'netdev' supports VLAN acceleration, False otherwise."""
+    NETIF_F_HW_VLAN_TX = 128
+    NETIF_F_HW_VLAN_RX = 256
+    NETIF_F_VLAN = NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX
+    return (netdev_get_features(netdev) & NETIF_F_VLAN) != 0
+
 #
 # PIF miscellanea
 #
@@ -528,6 +571,12 @@ class DatapathVswitch(Datapath):
         # when they are added, and a network device that is down
         # always reports "no carrier".
         physical_devices = datapath_get_physical_pifs(self._dp)
+
+        if pif_is_bond(self._dp):
+            brec = db().get_pif_record(self._dp)
+            bond_mtu = mtu_setting(brec['network'], "PIF", brec['other_config'])
+        else:
+            bond_mtu = None
         
         for p in physical_devices:
             prec = db().get_pif_record(p)
@@ -535,7 +584,10 @@ class DatapathVswitch(Datapath):
 
             dev = pif_netdev_name(p)
 
-            mtu = mtu_setting(prec['network'], "PIF", oc)
+            if bond_mtu:
+                mtu = bond_mtu
+            else:
+                mtu = mtu_setting(prec['network'], "PIF", oc)
 
             netdev_up(dev, mtu)
 
@@ -545,6 +597,20 @@ class DatapathVswitch(Datapath):
             if len(offload):
                 run_command(['/sbin/ethtool', '-K', dev] + offload)
 
+            driver = netdev_get_driver_name(dev)
+            if 'vlan-bug-workaround' in oc:
+                vlan_bug_workaround = oc['vlan-bug-workaround'] == 'true'
+            elif driver in NO_VLAN_WORKAROUND_DRIVERS:
+                vlan_bug_workaround = False
+            else:
+                vlan_bug_workaround = netdev_has_vlan_accel(dev)
+
+            if vlan_bug_workaround:
+                setting = 'on'
+            else:
+                setting = 'off'
+            run_command(['/usr/sbin/ovs-vlan-bug-workaround', dev, setting])
+
         datapath_modify_config(self._vsctl_argv)
 
     def post(self):