X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=vswitchd%2Fvswitch.xml;h=608225647cf16e4fcc2140d3b8d0affb1366482e;hb=3a48ace3e4799ce25099a8584372abe7a4d6d771;hp=b3029eb2633241a7b5b29da10e0aa2e346922b79;hpb=084f529087b7d3a3b3e0df470ad4ad39800cbab5;p=openvswitch

diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index b3029eb2..60822564 100644
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -334,11 +334,19 @@
       </column>
 
       <column name="flood_vlans">
-        VLAN IDs of VLANs on which MAC address learning should be disabled, so
-        that packets are flooded instead of being sent to specific ports that
-        are believed to contain packets' destination MACs.  This should
-        ordinarily be used to disable MAC learning on VLANs used for mirroring
-        (RSPAN VLANs).  It may also be useful for debugging.
+        <p>
+          VLAN IDs of VLANs on which MAC address learning should be disabled,
+          so that packets are flooded instead of being sent to specific ports
+          that are believed to contain packets' destination MACs.  This should
+          ordinarily be used to disable MAC learning on VLANs used for
+          mirroring (RSPAN VLANs).  It may also be useful for debugging.
+        </p>
+        <p>
+          SLB bonding (see the <ref table="Port" column="bond_mode"/> column in
+          the <ref table="Port"/> table) is incompatible with
+          <code>flood_vlans</code>.  Consider using another bonding mode or
+          a different type of mirror instead.
+        </p>
       </column>
     </group>
 
@@ -453,6 +461,16 @@
 	  <dd>
             Values below 100 will be rounded up to 100.
           </dd>
+          <dt><code>forward-bpdu</code></dt>
+          <dd>
+            Option to allow forwarding of BPDU frames when NORMAL 
+            action if invoked. Frames with reserved Ethernet addresses 
+            (e.g. STP BPDU) will be forwarded when this option is enabled. 
+            If the Open vSwitch bridge is used to connect different
+            Ethernet networks, and if Open vSwtich node does not run STP, 
+            then this option should be enabled.    
+            Default is disabled, set to <code>true</code> to enable. 
+          </dd>
         </dl>
       </column>
     </group>
@@ -662,9 +680,6 @@
         Key-value pairs for configuring rarely used port features.  The
         currently defined key-value pairs are:
         <dl>
-          <dt><code>hwaddr</code></dt>
-          <dd>An Ethernet address in the form
-            <code><var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var></code>.</dd>
           <dt><code>bond-rebalance-interval</code></dt>
           <dd>For an SLB bonded port, the number of milliseconds between
             successive attempts to rebalance the bond, that is, to
@@ -1610,12 +1625,12 @@
     </column>
   </table>
 
-  <table name="Mirror" title="Port mirroring (SPAN/RSPAN).">
+  <table name="Mirror" title="Port mirroring (SPAN/RSPAN/ERSPAN).">
     <p>A port mirror within a <ref table="Bridge"/>.</p>
     <p>A port mirror configures a bridge to send selected frames to special
-      ``mirrored'' ports, in addition to their normal destinations.  Mirroring
-      traffic may also be referred to as SPAN or RSPAN, depending on the
-      mechanism used for delivery.</p>
+    ``mirrored'' ports, in addition to their normal destinations.  Mirroring
+    traffic may also be referred to as SPAN, RSPAN, or ERSPAN, depending on how
+    the mirrored traffic is sent.</p>
 
     <column name="name">
       Arbitrary identifier for the <ref table="Mirror"/>.
@@ -1656,10 +1671,14 @@
       <column name="output_port">
         <p>Output port for selected packets, if nonempty.</p>
         <p>Specifying a port for mirror output reserves that port exclusively
-          for mirroring.  No frames other than those selected for mirroring
-          will be forwarded to the port, and any frames received on the port
-          will be discarded.</p>
-        <p>This type of mirroring is sometimes called SPAN.</p>
+        for mirroring.  No frames other than those selected for mirroring
+        will be forwarded to the port, and any frames received on the port
+        will be discarded.</p>
+        <p>
+          The output port may be any kind of port supported by Open vSwitch.
+          It may be, for example, a physical port (sometimes called SPAN), or a
+          GRE tunnel (sometimes called ERSPAN).
+        </p>
       </column>
 
       <column name="output_vlan">
@@ -1727,6 +1746,10 @@
           Open vSwitch is being used as an intermediate switch, learning can be
           disabled by adding the mirrored VLAN to <ref column="flood_vlans"/>
           in the appropriate <ref table="Bridge"/> table or tables.</p>
+          <p>
+            Mirroring to a GRE tunnel has fewer caveats than mirroring to a
+            VLAN and should generally be preferred.
+          </p>
       </column>
     </group>